Add initial support for the ASpeed 2050 and the ASUS KGPE-D16

Thermal management is functional but expects all fans to be attached

Known issues:
 * BMC has been observed spontaneously rebooting after ~7-8 hours uptime
   with no logs and no console output.
 * While kcs has been implemented, the IPMI daemon is only functional
   enough to report chassis status.

130 files changed, 15666 insertions, 0 deletions

diff --git a/meta-raptor/meta-asus/COPYING.MIT b/meta-raptor/meta-asus/COPYING.MIT
new file mode 100644
index 0000000..89de354
--- /dev/null
+++ b/meta-raptor/meta-asus/COPYING.MIT
@@ -0,0 +1,17 @@
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
diff --git a/meta-raptor/meta-asus/README b/meta-raptor/meta-asus/README
new file mode 100644
index 0000000..949936b
--- /dev/null
+++ b/meta-raptor/meta-asus/README
@@ -0,0 +1,64 @@
+This README file contains information on the contents of the
+asus layer.
+
+Please see the corresponding sections below for details.
+
+
+Dependencies
+============
+
+This layer depends on:
+
+  URI: git://git.openembedded.org/bitbake
+  branch: master
+
+  URI: git://git.openembedded.org/openembedded-core
+  layers: meta
+  branch: master
+
+  URI: git://git.yoctoproject.org/xxxx
+  layers: xxxx
+  branch: master
+
+
+Patches
+=======
+
+Please submit any patches against the asus layer to the
+xxxx mailing list (xxxx@zzzz.org) and cc: the maintainer:
+
+Maintainer: XXX YYYYYY <xxx.yyyyyy@zzzzz.com>
+
+
+Table of Contents
+=================
+
+  I. Adding the asus layer to your build
+ II. Misc
+
+
+I. Adding the asus layer to your build
+=================================================
+
+--- replace with specific instructions for the asus layer ---
+
+In order to use this layer, you need to make the build system aware of
+it.
+
+Assuming the asus layer exists at the top-level of your
+yocto build tree, you can add it to the build system by adding the
+location of the asus layer to bblayers.conf, along with any
+other layers needed. e.g.:
+
+  BBLAYERS ?= " \
+    /path/to/yocto/meta \
+    /path/to/yocto/meta-yocto \
+    /path/to/yocto/meta-yocto-bsp \
+    /path/to/yocto/meta-asus \
+    "
+
+
+II. Misc
+========
+
+--- replace with specific information about the asus layer ---
diff --git a/meta-raptor/meta-asus/classes/asus_uboot_image.bbclass b/meta-raptor/meta-asus/classes/asus_uboot_image.bbclass
new file mode 100644
index 0000000..19aa05d
--- /dev/null
+++ b/meta-raptor/meta-asus/classes/asus_uboot_image.bbclass
@@ -0,0 +1,51 @@
+inherit image_types_uboot
+
+# 24M
+IMAGE_ROOTFS_SIZE = "24576"
+# and don't put overhead behind my back
+IMAGE_OVERHEAD_FACTOR = "1"
+
+IMAGE_PREPROCESS_COMMAND += " generate_data_mount_dir ; "
+IMAGE_POSTPROCESS_COMMAND += " flash_image_generate ; "
+
+FLASH_IMAGE_NAME ?= "flash-${MACHINE}-${DATETIME}"
+FLASH_IMAGE_LINK ?= "flash-${MACHINE}"
+# 16M
+FLASH_SIZE ?= "16384"
+FLASH_UBOOT_OFFSET ?= "0"
+# 512k
+FLASH_KERNEL_OFFSET ?= "512"
+# 2.4M
+FLASH_ROOTFS_OFFSET ?= "2304"
+
+flash_image_generate() {
+  kernelfile="${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}"
+  ubootfile="${DEPLOY_DIR_IMAGE}/u-boot.${UBOOT_SUFFIX}"
+  # rootfs has to match the type defined in IMAGE_FSTYPES"
+  rootfs="${DEPLOY_DIR_IMAGE}/${IMAGE_LINK_NAME}.squashfs"
+  if [ ! -f $kernelfile ]; then
+    echo "Kernel file ${kernelfile} does not exist"
+    return 1
+  fi
+  if [ ! -f $ubootfile ]; then
+    echo "U-boot file ${ubootfile} does not exist"
+    return 1
+  fi
+  if [ ! -f $rootfs ]; then
+    echo "Rootfs file ${rootfs} does not exist"
+    return 1
+  fi
+  dst="${DEPLOY_DIR_IMAGE}/${FLASH_IMAGE_NAME}"
+  rm -rf $dst
+  dd if=/dev/zero bs=1k count=${FLASH_SIZE} | tr "\000" "\377" > ${dst}
+  dd if=${ubootfile} of=${dst} bs=1k seek=${FLASH_UBOOT_OFFSET} conv=notrunc
+  dd if=${kernelfile} of=${dst} bs=1k seek=${FLASH_KERNEL_OFFSET} conv=notrunc
+  dd if=${rootfs} of=${dst} bs=1k seek=${FLASH_ROOTFS_OFFSET} conv=notrunc
+  dstlink="${DEPLOY_DIR_IMAGE}/${FLASH_IMAGE_LINK}"
+  rm -rf $dstlink
+  ln -sf ${FLASH_IMAGE_NAME} $dstlink
+}
+
+generate_data_mount_dir() {
+  mkdir -p "${IMAGE_ROOTFS}/mnt/data"
+}
diff --git a/meta-raptor/meta-asus/conf/bblayers.conf.sample b/meta-raptor/meta-asus/conf/bblayers.conf.sample
new file mode 100644
index 0000000..1fd6752
--- /dev/null
+++ b/meta-raptor/meta-asus/conf/bblayers.conf.sample
@@ -0,0 +1,22 @@
+# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+LCONF_VERSION = "6"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ##OEROOT##/meta \
+  ##OEROOT##/meta-yocto \
+  ##OEROOT##/meta-yocto-bsp \
+  ##OEROOT##/meta-openembedded/meta-oe \
+  ##OEROOT##/meta-openembedded/meta-networking \
+  ##OEROOT##/meta-openembedded/meta-python \
+  ##OEROOT##/meta-openbmc \
+  ##OEROOT##/meta-openbmc/meta-aspeed \
+  ##OEROOT##/meta-openbmc/meta-raptor/meta-asus \
+  "
+BBLAYERS_NON_REMOVABLE ?= " \
+  ##OEROOT##/meta \
+  ##OEROOT##/meta-yocto \
+  "
diff --git a/meta-raptor/meta-asus/conf/conf-notes.txt b/meta-raptor/meta-asus/conf/conf-notes.txt
new file mode 100644
index 0000000..99f9d6a
--- /dev/null
+++ b/meta-raptor/meta-asus/conf/conf-notes.txt
@@ -0,0 +1,2 @@
+Common targets are:
+    asus-image
diff --git a/meta-raptor/meta-asus/conf/layer.conf b/meta-raptor/meta-asus/conf/layer.conf
new file mode 100644
index 0000000..547625c
--- /dev/null
+++ b/meta-raptor/meta-asus/conf/layer.conf
@@ -0,0 +1,10 @@
+# We have a conf and classes directory, add to BBPATH
+BBPATH .= ":${LAYERDIR}"
+
+# We have recipes-* directories, add to BBFILES
+BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \
+	${LAYERDIR}/recipes-*/*/*.bbappend"
+
+BBFILE_COLLECTIONS += "asus"
+BBFILE_PATTERN_asus = "^${LAYERDIR}/"
+BBFILE_PRIORITY_asus = "10"
diff --git a/meta-raptor/meta-asus/conf/local.conf.sample b/meta-raptor/meta-asus/conf/local.conf.sample
new file mode 100644
index 0000000..2de916f
--- /dev/null
+++ b/meta-raptor/meta-asus/conf/local.conf.sample
@@ -0,0 +1,9 @@
+#
+# Local configuration file for building the OpenBMC image.
+#
+
+# Machine Selection
+MACHINE ??= "asus"
+
+# OpenBMC distro settings
+DISTRO ?= "poky"
diff --git a/meta-raptor/meta-asus/conf/machine/asus.conf b/meta-raptor/meta-asus/conf/machine/asus.conf
new file mode 100644
index 0000000..13852e7
--- /dev/null
+++ b/meta-raptor/meta-asus/conf/machine/asus.conf
@@ -0,0 +1,18 @@
+#@TYPE: Machine
+#@NAME: ASUS
+#@DESCRIPTION: Machine configuration for Raptor ASUS
+
+UBOOT_MACHINE_asus = "asus_config"
+
+require conf/machine/include/ast1250.inc
+
+# configuration for preferred version of packages
+PREFERRED_VERSION_libipmi = "0.1"
+PREFERRED_VERSION_ipmid = "0.1"
+PREFERRED_VERSION_rest-api = "0.1"
+
+MACHINE_ESSENTIAL_EXTRA_RDEPENDS += "kernel-module-i2c-dev-sysfs"
+MACHINE_ESSENTIAL_EXTRA_RDEPENDS += "kernel-module-cpld"
+MACHINE_ESSENTIAL_EXTRA_RDEPENDS += "kernel-module-com-e-driver"
+
+TCLIBC = 'eglibc'
diff --git a/meta-raptor/meta-asus/recipes-asus/bmc-log/bmc-log_0.1.bb b/meta-raptor/meta-asus/recipes-asus/bmc-log/bmc-log_0.1.bb
new file mode 100644
index 0000000..2788a36
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/bmc-log/bmc-log_0.1.bb
@@ -0,0 +1,50 @@
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+SUMMARY = "Logging Utility"
+DESCRIPTION = "Util for logging"
+SECTION = "base"
+PR = "r1"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://bmc-log.c;beginline=4;endline=16;md5=da35978751a9d71b73679307c4d296ec"
+
+SRC_URI = "file://bmc-log.c \
+	   file://bmc-log.h \
+	   file://Makefile \
+	   file://bmc-log-config \
+	   file://bmc-log.sh \
+          "
+
+S = "${WORKDIR}"
+
+do_install() {
+	install -d ${D}${sbindir}
+	install -m 755 bmc-log ${D}${sbindir}/bmc-log
+	install -d ${D}${sysconfdir}/default
+	install -m 755 bmc-log-config ${D}${sysconfdir}/default/bmc-log
+	install -d ${D}${sysconfdir}/init.d
+	install -m 755 bmc-log.sh ${D}${sysconfdir}/init.d/bmc-log.sh
+	update-rc.d -r ${D} bmc-log.sh start 92 S .
+}
+
+FILES_${PN} = "${sbindir} ${sysconfdir} "
+
+# Inhibit complaints about .debug directories
+
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
+INHIBIT_PACKAGE_STRIP = "1"
diff --git a/meta-raptor/meta-asus/recipes-asus/bmc-log/files/Makefile b/meta-raptor/meta-asus/recipes-asus/bmc-log/files/Makefile
new file mode 100644
index 0000000..5004556
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/bmc-log/files/Makefile
@@ -0,0 +1,24 @@
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+
+LIBS = -lutil
+
+all:
+	${CC} ${CFLAGS} -o bmc-log bmc-log.c ${LIBS}
+
+clean:
+	rm -rf *.o bmc-log
diff --git a/meta-raptor/meta-asus/recipes-asus/bmc-log/files/bmc-log-config b/meta-raptor/meta-asus/recipes-asus/bmc-log/files/bmc-log-config
new file mode 100644
index 0000000..529adf2
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/bmc-log/files/bmc-log-config
@@ -0,0 +1,16 @@
+# Configuration used by bmc-log script
+
+#Serial port connected to the micro-server
+US_TTY=""
+
+#IP version of the log collecting server
+LOG_SERVER_IP_VERSION=""
+
+#Host name of the log collecting server
+LOG_SERVER_NAME=""
+
+#Port number of the log collecting server
+LOG_SERVER_PORT=""
+
+#Baud rate to set for the US_TTY
+TTY_BAUD_RATE=""
diff --git a/meta-raptor/meta-asus/recipes-asus/bmc-log/files/bmc-log.c b/meta-raptor/meta-asus/recipes-asus/bmc-log/files/bmc-log.c
new file mode 100644
index 0000000..078db7b
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/bmc-log/files/bmc-log.c
@@ -0,0 +1,559 @@
+/*
+ * Copyright 2014-present Facebook. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <fcntl.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <stdarg.h>
+#include <stdbool.h>
+#include <unistd.h>
+#include <string.h>
+#include <linux/serial.h>
+#include <sys/socket.h>
+#include <sys/types.h>
+#include <sys/param.h>
+#include <time.h>
+#include <arpa/inet.h>
+#include <sys/stat.h>
+#include <pty.h>
+#include <errno.h>
+#include <signal.h>
+#include <netinet/in.h>
+#include <netdb.h>
+#include "bmc-log.h"
+
+FILE *error_file = NULL;
+
+bool kill_received = false;	// To check if a killing interrupt is received
+
+speed_t baud_rate = B57600;	// Default baud rate - change if user inputs a different one
+
+int fd_tty = -1, fd_soc = -1;
+
+/* Hostname and port of the server */
+char *hostname;
+int port;
+
+struct termios orig_tty_state;
+
+char *get_time()
+{
+	static char mytime[TIME_FORMAT_SIZE];
+	memset(mytime, 0, sizeof(mytime));
+	time_t this_time;
+	struct tm *this_tm;
+	this_time = time(NULL);
+	this_tm = localtime(&this_time);
+
+	snprintf(mytime, sizeof(mytime), "%04d-%02d-%02d %02d:%02d:%02d",
+	                                 1900 + this_tm->tm_year, this_tm->tm_mon + 1,
+	                                 this_tm->tm_mday, this_tm->tm_hour,
+	                                 this_tm->tm_min, this_tm->tm_sec);
+	return mytime;
+}
+
+void errlog(char *frmt, ...)
+{
+	va_list args;
+	va_start(args, frmt);
+	struct stat st;
+
+	char *time_now = get_time();
+
+	fprintf(stderr, "[%s] ", time_now);
+	vfprintf(stderr, frmt, args);
+
+	if (error_file) {
+		stat(error_log_file, &st);
+		if (st.st_size >= MAX_LOG_FILE_SIZE) {
+			truncate(error_log_file, 0);
+		}
+		fprintf(error_file, "[%s] ", time_now);
+		vfprintf(error_file, frmt, args);
+		fflush(error_file);
+	}
+}
+
+/* Get the address info of netcons server */
+struct addrinfo *get_addr_info(int ip_version)
+{
+	int ip_family = (ip_version == IPV4) ? AF_INET : AF_INET6;
+	struct addrinfo hints;
+
+	struct addrinfo *result;
+	result = malloc(sizeof(*result));
+	if (!result) {
+		errlog("Error: Unable to allocate memory - %m\n");
+		return NULL;
+	}
+
+	memset(&hints, 0, sizeof(struct addrinfo));
+	hints.ai_family = ip_family;	/* Allow IPv4 or IPv6 */
+	hints.ai_socktype = SOCK_DGRAM;	/* Datagram socket */
+	hints.ai_flags = AI_PASSIVE;	/* For wildcard IP address */
+	hints.ai_protocol = 0;	/* Any protocol */
+	hints.ai_canonname = NULL;
+	hints.ai_addr = NULL;
+	hints.ai_next = NULL;
+
+	if (getaddrinfo(hostname, NULL, &hints, &result)) {
+		errlog("Error: getaddrinfo failed - %m\n");
+		return NULL;
+	}
+
+	return result;
+}
+
+/* Prepare Ipv4 Socket */
+bool prepare_sock(struct sockaddr_in * tgt_addr)
+{
+	struct addrinfo *addr_info;
+	memset(tgt_addr, 0, sizeof(*tgt_addr));
+
+	if ((addr_info = get_addr_info(IPV4)) == NULL) {
+		errlog("Error: Unable to get address info\n");
+		return false;
+	}
+
+	tgt_addr->sin_addr = ((struct sockaddr_in *)addr_info->ai_addr)->sin_addr;
+	tgt_addr->sin_port = htons(port);
+	tgt_addr->sin_family = AF_INET;
+
+	return true;
+}
+
+/* Prepare Ipv6 Socket */
+bool prepare_sock6(struct sockaddr_in6 * tgt_addr6)
+{
+	struct addrinfo *addr_info;
+	memset(tgt_addr6, 0, sizeof(*tgt_addr6));
+
+	if ((addr_info = get_addr_info(IPV6)) == NULL) {
+		errlog("Erorr: Unable to get address info\n");
+		return false;
+	}
+
+	tgt_addr6->sin6_addr = ((struct sockaddr_in6 *)addr_info->ai_addr)->sin6_addr;
+	tgt_addr6->sin6_port = htons(port);
+	tgt_addr6->sin6_family = AF_INET6;
+
+	return true;
+}
+
+/* Set TTY to raw mode */
+bool set_tty(int fd)
+{
+	struct termios tty_state;
+
+	if (tcgetattr(fd, &tty_state) < 0) {
+		return false;
+	}
+
+	if (tcgetattr(fd, &orig_tty_state) < 0)	// Save original settings
+	{
+		return false;
+	}
+
+	if (cfsetspeed(&tty_state, baud_rate) == -1) {
+		errlog("Error: Baud Rate not set - %m\n");
+		return false;
+	}
+
+	tty_state.c_lflag &= ~(ICANON | IEXTEN | ISIG | ECHO);
+	tty_state.c_iflag &= ~(IGNCR | ICRNL | INPCK | ISTRIP | IXON | BRKINT);
+	tty_state.c_iflag |= (IGNCR | ICRNL);
+	tty_state.c_oflag &= ~OPOST;
+	tty_state.c_cflag |= CS8;
+
+	tty_state.c_cc[VMIN] = 1;
+	tty_state.c_cc[VTIME] = 0;
+
+	if (tcsetattr(fd, TCSAFLUSH, &tty_state) < 0) {
+		return false;
+	}
+
+	return true;
+}
+
+/* Create a pseudo terminal for other process to use (as this program is using up the actual TTY) */
+int create_pseudo_tty()
+{
+	int amaster, aslave;
+	int flags;
+
+	if (openpty(&amaster, &aslave, NULL, NULL, NULL) == -1) {
+		errlog("Error: Openpty failed - %m\n");
+		return -1;
+	}
+
+	/* Set to non blocking mode */
+	flags = fcntl(amaster, F_GETFL);
+	flags |= O_NONBLOCK;
+	fcntl(amaster, F_SETFL, flags);
+
+	FILE *pseudo_save_file = fopen(pseudo_tty_save_file, "w+");
+	if (!pseudo_save_file) {
+		errlog("Error: Unable to open the pseudo info file - %m\n");
+		return -1;
+	}
+	/* Save the name of the created pseudo tty in a text file for other processes to use */
+	if (fprintf(pseudo_save_file, "%s\n", ttyname(aslave)) == -1) {
+		errlog("Error writing to the pseudo info file\n");
+		fclose(pseudo_save_file);
+		return -1;
+	}
+	fclose(pseudo_save_file);
+
+	if (set_tty(aslave) == -1) {
+		errlog("Error: Slave TTY not set properly\n");
+		return -1;
+	}
+
+	return amaster;
+}
+
+/* Prepare logs from the read_buf and send them to the server */
+bool prepare_log_send(char *read_buf, int max_read, int fd_socket)
+{
+	size_t buff_index = 0;	// Index for the read_buf string
+
+	static char line[LINE_LEN] = { 0 };
+	static size_t line_index = 0;	// Index for the line string
+
+	char msg[MSG_LEN] = { 0 };	// Message to be sent to the server
+
+	/* Kernel Version */
+	static char kernel_version[KERNEL_VERSION_LEN] = "dummy_kernel";
+	static int kernel_search_pos = 0;
+
+	while (buff_index < max_read && read_buf[buff_index] != '\0') {
+		if (read_buf[buff_index] == 'L')	// Check if there is a possibility of new kernel version
+		{
+			kernel_search_pos = line_index;
+		}
+
+		/* Send the log when a line is read */
+		if (read_buf[buff_index] == '\n') {
+			if (kernel_search_pos > 0) {
+				if (strncmp(line + kernel_search_pos, "Linux version ", kernel_search_len) == 0) {
+					sscanf(line + kernel_search_pos + kernel_search_len, "%s", kernel_version);
+				}
+				kernel_search_pos = 0;
+			}
+
+			/* Prepare the message */
+			memset(msg, 0, sizeof(msg));
+			if (snprintf(msg, sizeof(msg), "%s %s %s %s", "kernel:", kernel_version, "- msg", line) < 0) {
+				errlog("Error copying the message - %m\n");
+				return false;
+			}
+
+			/* Send message to the server */
+			if (write(fd_socket, msg, strlen(msg)) < 0) {
+				errlog("Error: Write to socket failed - %m\n");
+				return false;
+			}
+
+			/* Reset the line buffer */
+			line_index = 0;
+			memset(line, 0, sizeof(line));
+
+			buff_index++;
+			continue;
+		}
+
+		/* If line is too big, send only the first few bytes and discard others. */
+		if (line_index >= sizeof(line)) {
+			line[line_index - 1] = 0;
+			buff_index++;
+			continue;
+		}
+
+		line[line_index++] = read_buf[buff_index++];
+	}
+
+	return true;
+}
+
+/* Read text from the TTY and send to send as logs */
+bool read_send(int fd_tty, int fd_socket)
+{
+	char read_buf[LINE_LEN] = { 0 };	// Buffer to be read into.
+	int read_size = 0;
+	fd_set readset;
+	int sel;
+	int fdmax;
+
+	int pseudo_tty = create_pseudo_tty();
+
+	if (pseudo_tty == -1) {
+		errlog("Error: Cannot create a psuedo terminal\n");
+		return false;
+	}
+
+	fdmax = MAX(fd_tty, pseudo_tty);
+
+	while (!kill_received) {
+		do {
+			FD_ZERO(&readset);
+			FD_SET(fd_tty, &readset);
+			FD_SET(pseudo_tty, &readset);
+
+			sel = select(fdmax + 1, &readset, NULL, NULL, NULL);
+		}
+		while (sel == -1 && errno == EINTR && !kill_received);
+
+		memset(read_buf, 0, sizeof(read_buf));
+		if (FD_ISSET(fd_tty, &readset)) {
+			read_size = read(fd_tty, read_buf, sizeof(read_buf) - 1);
+
+			if (read_size == 0) {
+				continue;
+			}
+			if (read_size < 0) {
+				if (errno == EAGAIN) {
+					continue;
+				}
+				errlog("Error: Read from tty failed - %m\n");
+				return false;
+			}
+
+			/* Send the read data to the pseudo terminal */
+			if (write(pseudo_tty, read_buf, read_size) < 0) {
+				if (errno == EAGAIN)	// Output buffer full - flush it.
+				{
+					tcflush(pseudo_tty, TCIOFLUSH);
+					continue;
+				}
+
+				errlog("Error: Write to pseudo tty failed - %m\n");
+				return false;
+			}
+
+			/* Prepare log message and send to the server */
+			if (!prepare_log_send(read_buf, sizeof(read_buf), fd_socket)) {
+				errlog("Error: Sending log failed - %m\n");
+				return false;
+			}
+		}
+		/*if (FD_ISSET(fd_tty, &readset)) */
+		if (kill_received) {
+			break;
+		}
+
+		/* Check if there is an data in the pseudo terminal's buffer */
+		if (FD_ISSET(pseudo_tty, &readset)) {
+			read_size = read(pseudo_tty, read_buf, sizeof(read_buf) - 1);
+
+			if (read_size == 0) {
+				continue;
+			}
+			if (read_size < 0) {
+				if (errno == EAGAIN) {
+					continue;
+				}
+				errlog("Error: Read from pseudo tty failed - %m\n");
+				return false;
+			}
+
+			if (write(fd_tty, read_buf, read_size) < 0) {
+				if (errno == EAGAIN)	// Output buffer full - flush it.
+				{
+					tcflush(fd_tty, TCIOFLUSH);
+					continue;
+				}
+
+				errlog("Error: Write to tty failed - %m\n");
+				return false;
+			}
+		}		/*if (FD_ISSET(pseudo_tty,&readset)) */
+	}			/*while (!kill_received) */
+
+	return true;
+}
+
+void cleanup()
+{
+	remove(pseudo_tty_save_file);
+	tcsetattr(fd_tty, TCSAFLUSH, &orig_tty_state);	//Restore original settings
+	close(fd_tty);
+	close(fd_soc);
+	fclose(error_file);
+}
+
+void sig_kill(int signum)
+{
+	kill_received = true;
+}
+
+void register_kill()
+{
+	struct sigaction sigact;
+	sigset_t sigset;
+
+	sigemptyset(&sigset);
+	memset(&sigact, 0, sizeof sigact);
+	sigact.sa_handler = sig_kill;
+	sigact.sa_mask = sigset;
+
+	sigaction(SIGHUP, &sigact, NULL);
+	sigaction(SIGINT, &sigact, NULL);
+	sigaction(SIGQUIT, &sigact, NULL);
+	sigaction(SIGPIPE, &sigact, NULL);
+	sigaction(SIGTERM, &sigact, NULL);
+	sigaction(SIGKILL, &sigact, NULL);
+	sigaction(SIGABRT, &sigact, NULL);
+}
+
+void usage(char *prog_name)
+{
+	printf("Usage:\n");
+	printf("\t%s TTY ip_version(4 or 6) hostname port [baud rate (like 57600)]\n", prog_name);
+	printf("\t%s -h : For this help\n", prog_name);
+	printf("Example:\n\t./bmc-log /dev/ttyS1 4 netcons.any.facebook.com 1514\n");
+	printf("\tOR\n\t./bmc-log /dev/ttyS1 6 netcons6.any.facebook.com 1514 57600\n");
+}
+
+bool parse_user_input(int nargs, char **args, char *read_tty, int read_tty_size, int *ip_version)
+{
+	if (nargs < 5) {
+		if ((nargs > 1) && ((strcmp(args[1], "-h") == 0) || (strcmp(args[1], "--help") == 0))) {
+			usage(args[0]);
+			return false;	// Not an error but returning -1 for the main function to return
+		}
+		fprintf(stderr, "Error: Invalid number of arguments\n");
+		usage(args[0]);
+		return false;
+	}
+
+	if (strlen(args[1]) > read_tty_size) {
+		fprintf(stderr, "Error: TTY too long\n");
+		usage(args[0]);
+		return false;
+	}
+
+	/* TTT to read the logs from */
+	strncpy(read_tty, args[1], read_tty_size);
+
+	/* IP Version, IP Address and Port of the netcons server */
+	*ip_version = atoi(args[2]);
+	if (*ip_version != IPV4 && *ip_version != IPV6) {
+		fprintf(stderr, "Error: Invalid IP Version input\n");
+		usage(args[0]);
+		return false;
+	}
+
+	hostname = args[3];
+	port = atoi(args[4]);
+
+	baud_rate = B57600;
+	if (nargs == 6)
+		baud_rate = atoi(args[5]);
+
+	return true;
+}
+
+int main(int argc, char **argv)
+{
+	char read_tty[TTY_LEN] = { 0 };
+	int ip_version;
+	int socket_domain = AF_UNSPEC;
+	char cmd[COMMAND_LEN] = { 0 };
+
+	/* Open the error log file */
+	error_file = fopen(error_log_file, "a+");
+	if (!error_file) {
+		printf("Error: Unable to open log file - %m\n");
+		return 1;
+	}
+
+	/* Register actions upon interrupts */
+	register_kill();
+
+	/* Parse the user input */
+	if (!parse_user_input(argc, argv, read_tty, sizeof(read_tty), &ip_version)) {
+		return 2;
+	}
+
+	snprintf(cmd, sizeof(cmd), "%s %s", uS_console, "connect");
+	if (system(cmd) == -1) {
+		errlog("Error: Unable to connect to the micro-server\n");
+		return 3;
+	}
+
+	/* Create a socket to communicate with the netcons server */
+	socket_domain = (ip_version == IPV4) ? AF_INET : AF_INET6;
+	fd_soc = socket(socket_domain, SOCK_DGRAM, 0);
+	if (fd_soc == -1) {
+		errlog("Error: Socket creation failed -  %m\n");
+		return 4;
+	}
+
+	if (ip_version == IPV4) {	/* IPv4 */
+		struct sockaddr_in tgt_addr;
+		if (!prepare_sock(&tgt_addr)) {
+			close(fd_soc);
+			errlog("Error: Socket not valid\n");
+			return 5;
+		}
+
+		if (connect(fd_soc, (struct sockaddr *)&tgt_addr, sizeof(tgt_addr)) == -1) {
+			close(fd_soc);
+			errlog("Error: Socket connection failed - %m\n");
+			return 6;
+		}
+
+	} else {		/* IPv6 */
+
+		struct sockaddr_in6 tgt_addr6;
+		if (!prepare_sock6(&tgt_addr6)) {
+			close(fd_soc);
+			errlog("Error: Socket not valid\n");
+			return 5;
+		}
+
+		if (connect(fd_soc, (struct sockaddr *)&tgt_addr6, sizeof(tgt_addr6)) == -1) {
+			close(fd_soc);
+			errlog("Error: Socket connection failed - %m\n");
+			return 6;
+		}
+	}
+
+	/* TTY Operations */
+	if ((fd_tty = open(read_tty, O_RDWR | O_NOCTTY | O_NDELAY | O_NONBLOCK)) == -1) {
+		close(fd_soc);
+		errlog("Error: Serial Port %s open failed - %m\n", read_tty);
+		return 7;
+	}
+
+	if (!set_tty(fd_tty)) {
+		errlog("Error: tty not set properly\n");
+		cleanup();
+		return 8;
+	}
+
+	/* Read, prepare and send the logs */
+	if (!read_send(fd_tty, fd_soc)) {
+		errlog("Error: Sending logs failed\n");
+		cleanup();
+		return 9;
+	}
+
+	cleanup();
+	return 0;
+}
diff --git a/meta-raptor/meta-asus/recipes-asus/bmc-log/files/bmc-log.h b/meta-raptor/meta-asus/recipes-asus/bmc-log/files/bmc-log.h
new file mode 100644
index 0000000..5795e6a
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/bmc-log/files/bmc-log.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright 2014-present Facebook. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef BMC_LOG_H_
+#define BMC_LOG_H_
+
+/* IP Version */
+#define IPV4 (4)
+#define IPV6 (6)
+
+/* Search string for the kernel version */
+#define KERNEL_SEARCH_STR "Linux version "
+
+/* Size constants */
+#define TIME_FORMAT_SIZE (100)
+#define MAX_LOG_FILE_SIZE (1024*1024*5) //5MB
+#define TTY_LEN (50)
+#define LINE_LEN (257)
+#define MSG_LEN (1025)
+#define COMMAND_LEN (100)
+#define KERNEL_VERSION_LEN (100)
+
+static char *uS_console = "/usr/local/fbpackages/utils/us_console.sh";
+
+static char *error_log_file = "/var/log/bmc-log";
+
+static char *pseudo_tty_save_file = "/etc/us_pseudo_tty";
+
+static int kernel_search_len = sizeof(KERNEL_SEARCH_STR) - 1;
+
+#endif
diff --git a/meta-raptor/meta-asus/recipes-asus/bmc-log/files/bmc-log.sh b/meta-raptor/meta-asus/recipes-asus/bmc-log/files/bmc-log.sh
new file mode 100755
index 0000000..00bf63c
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/bmc-log/files/bmc-log.sh
@@ -0,0 +1,77 @@
+#!/bin/sh
+#
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+### BEGIN INIT INFO
+# Provides:          bmc-log
+# Required-Start:
+# Required-Stop:
+# Default-Start:     S
+# Default-Stop:
+# Short-Description: Collect micro-server kernel logs through serial port
+### END INIT INFO
+
+. /etc/default/bmc-log
+. /etc/init.d/functions
+
+DAEMON=/usr/sbin/bmc-log
+NAME=bmc-log
+DESC="Micro-Server log collection"
+
+TTY=${US_TTY:-/dev/ttyS1}
+IP=${LOG_SERVER_IP_VERSION:-4}
+LOG_SERVER=${LOG_SERVER_NAME:-}
+PORT=${LOG_SERVER_PORT:-}
+BAUD_RATE=${TTY_BAUD_RATE:-}
+
+if [ -z "$LOG_SERVER" ] || [ -z "$PORT" ]
+then
+	echo "Error: Server and/or port not set"
+	exit 0
+fi
+
+
+ACTION="$1"
+
+case "$ACTION" in
+  start)
+  	echo -e "Starting $DESC"
+	$DAEMON $TTY $IP $LOG_SERVER $PORT $BAUD_RATE
+    ;;
+  stop)
+    echo -e "Stopping $DESC: "
+    start-stop-daemon --stop --quiet --exec $DAEMON
+    ;;
+   restart|force-reload)
+    echo -e "Restarting $DESC: "
+    start-stop-daemon --stop --quiet --exec $DAEMON
+    sleep 1
+    $DAEMON $TTY $IP $LOG_SERVER $PORT $BAUD_RATE
+    ;;
+  status)
+    stat $DAEMON
+    exit $?
+    ;;
+  *)
+    N=${0##*/}
+    N=${N#[SK]??}
+    echo "Usage: $N {start|stop|status|restart|force-reload}" >&2
+    exit 1
+    ;;
+esac
diff --git a/meta-raptor/meta-asus/recipes-asus/fblibs/files/alert_control/Makefile b/meta-raptor/meta-asus/recipes-asus/fblibs/files/alert_control/Makefile
new file mode 100644
index 0000000..2f27a8c
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/fblibs/files/alert_control/Makefile
@@ -0,0 +1,27 @@
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+
+lib: libalert_control.so
+
+libalert_control.so: alert_control.c
+	$(CC) $(CFLAGS) -fPIC -c -o alert_control.o alert_control.c
+	$(CC) -shared -o libalert_control.so alert_control.o -lc
+
+.PHONY: clean
+
+clean:
+	rm -rf *.o libalert_control.so
diff --git a/meta-raptor/meta-asus/recipes-asus/fblibs/files/alert_control/alert_control.c b/meta-raptor/meta-asus/recipes-asus/fblibs/files/alert_control/alert_control.c
new file mode 100644
index 0000000..81b0329
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/fblibs/files/alert_control/alert_control.c
@@ -0,0 +1,117 @@
+/*
+ *
+ * Copyright 2014-present Facebook. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <errno.h>
+#include <syslog.h>
+#include "alert_control.h"
+
+#define PATH_ALERT_STATUS "/sys/bus/i2c/drivers/panther_plus/4-0040/alert_status"
+#define PATH_ALERT_CONTROL "/sys/bus/i2c/drivers/panther_plus/4-0040/alert_control"
+
+#define MASK_ALERT_SMS_KCS 0x01
+
+/*
+ * Function to enable/disable alert signal generation for a given Function Block
+ */
+int
+alert_control(e_fbid_t id, e_flag_t cflag) {
+  FILE *fp;
+  unsigned char rbuf[5] = {0};
+  unsigned char tbuf[3] = {0};
+  int count = 0;
+
+  fp = fopen(PATH_ALERT_CONTROL, "r+");
+  if (!fp) {
+    return -1;
+  }
+
+  count = fread(rbuf, sizeof(unsigned char), sizeof(rbuf), fp);
+  if (count == 0x0) {
+    fclose(fp);
+    return -1;
+  }
+
+  // Size of the request
+  tbuf[0] = 0x02;
+
+  switch(id) {
+  case FBID_SMS_KCS:
+    if (cflag == FLAG_ENABLE)
+      tbuf[1] = rbuf[2] | (0x01 << FBID_SMS_KCS);
+    else
+      tbuf[1] = rbuf[2] & (~(0x01 << FBID_SMS_KCS));
+
+    tbuf[2] = rbuf[3];
+    break;
+    // TODO: Add logic for other Function Blocks here
+  default:
+    tbuf[0] = rbuf[2];
+    tbuf[1] = rbuf[3];
+    break;
+  }
+
+  count = fwrite(tbuf, sizeof(unsigned char), sizeof(tbuf), fp);
+  if (count != sizeof(tbuf)) {
+    fclose(fp);
+    return (-1);
+  }
+
+  fclose(fp);
+
+  return 0;
+}
+
+/*
+ * Function to check if the alert for a given Function Block is asserted or not
+ */
+bool
+is_alert_present(e_fbid_t id) {
+  FILE *fp;
+  unsigned char buf[5] = {0};
+  int count = 0;
+
+  fp = fopen(PATH_ALERT_STATUS, "r");
+
+  if (!fp) {
+    return false;
+  }
+
+  count = fread(buf, sizeof(unsigned char), sizeof(buf), fp);
+  if (count == 0x0) {
+    fclose(fp);
+    sleep(2);
+    return false;
+  }
+
+  fclose(fp);
+
+  switch(id) {
+  case FBID_SMS_KCS:
+    if (buf[2] & (0x01 << FBID_SMS_KCS))
+      return true;
+    else
+      return false;
+    //TODO: Add logic for other Function Blocks here
+  default:
+    return false;
+  }
+}
diff --git a/meta-raptor/meta-asus/recipes-asus/fblibs/files/alert_control/alert_control.h b/meta-raptor/meta-asus/recipes-asus/fblibs/files/alert_control/alert_control.h
new file mode 100644
index 0000000..ca72591
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/fblibs/files/alert_control/alert_control.h
@@ -0,0 +1,64 @@
+/*
+ *
+ * Copyright 2014-present Facebook. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ALERT_CONTROL_H__
+#define __ALERT_CONTROL_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdbool.h>
+
+typedef enum {
+  FLAG_DISABLE = 0x00,
+  FLAG_ENABLE,
+} e_flag_t;
+
+typedef enum {
+  FBID_SMS_KCS = 0x00,
+  FBID_SMM_KCS,
+  FBID_COM1_DATA,
+  FBID_COM2_DATA,
+  FBID_COM1_STAT_CTRL,
+  FBID_COM2_STAT_CTRL,
+  FBID_POST,
+  FBID_I2C_PROXY1_MASTER,
+  FBID_I2C_PROXY1_STAT,
+  FBID_I2C_PROXY2_MASTER,
+  FBID_I2C_PROXY2_STAT,
+  FBID_GPIO_CONFIG,
+  FBID_GPIO_OUTPUT,
+  FBID_GPIO_INPUT,
+  FBID_GPIO_INTR,
+  FBID_GPIO_EVENT,
+  FBID_REG_READ,
+  FBID_ALERT_CTRL = 0xFD,
+  FBID_AERT_STAT = 0xFE,
+  FBID_DISCOVERY = 0xFF,
+} e_fbid_t;
+
+int alert_control(e_fbid_t id, e_flag_t cflag);
+bool is_alert_present(e_fbid_t id);
+
+#ifdef __cplusplus
+} // extern "C"
+#endif
+
+#endif /* __ALERT_CONTROL_H__ */
diff --git a/meta-raptor/meta-asus/recipes-asus/fblibs/files/ipmi/Makefile b/meta-raptor/meta-asus/recipes-asus/fblibs/files/ipmi/Makefile
new file mode 100644
index 0000000..369819c
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/fblibs/files/ipmi/Makefile
@@ -0,0 +1,27 @@
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+
+lib: libipmi.so
+
+libipmi.so: ipmi.c
+	$(CC) $(CFLAGS) -fPIC -c -o ipmi.o ipmi.c
+	$(CC) -shared -o libipmi.so ipmi.o -lc
+
+.PHONY: clean
+
+clean:
+	rm -rf *.o libipmi.so
diff --git a/meta-raptor/meta-asus/recipes-asus/fblibs/files/ipmi/ipmi.c b/meta-raptor/meta-asus/recipes-asus/fblibs/files/ipmi/ipmi.c
new file mode 100644
index 0000000..b5a3e19
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/fblibs/files/ipmi/ipmi.c
@@ -0,0 +1,81 @@
+/*
+ *
+ * Copyright 2014-present Facebook. All Rights Reserved.
+ *
+ * This file contains code to support IPMI2.0 Specificaton available @
+ * http://www.intel.com/content/www/us/en/servers/ipmi/ipmi-specifications.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "ipmi.h"
+#include <stdio.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <string.h>
+#include <syslog.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <sys/un.h>
+
+#define SOCK_PATH "/tmp/ipmi_socket"
+#define MAX_IPMI_RES_LEN 100
+
+/*
+ * Function to handle IPMI messages
+ */
+void
+ipmi_handle(unsigned char *request, unsigned char req_len,
+            unsigned char *response, unsigned char *res_len) {
+
+  int s, t, len;
+  struct sockaddr_un remote;
+
+  // TODO: Need to update to reuse the socket instead of creating new
+  if ((s = socket(AF_UNIX, SOCK_STREAM, 0)) == -1) {
+    syslog(LOG_ALERT, "ipmi_handle: socket() failed\n");
+    return;
+  }
+
+  remote.sun_family = AF_UNIX;
+  strcpy(remote.sun_path, SOCK_PATH);
+  len = strlen(remote.sun_path) + sizeof(remote.sun_family);
+
+  if (connect(s, (struct sockaddr *)&remote, len) == -1) {
+    syslog(LOG_ALERT, "ipmi_handle: connect() failed\n");
+    return;
+  }
+
+  if (send(s, request, req_len, 0) == -1) {
+    syslog(LOG_ALERT, "ipmi_handle: send() failed\n");
+    return;
+  }
+
+  if ((t=recv(s, response, MAX_IPMI_RES_LEN, 0)) > 0) {
+    *res_len = t;
+  } else {
+    if (t < 0) {
+      syslog(LOG_ALERT, "ipmi_handle: recv() failed\n");
+    } else {
+      printf("Server closed connection");
+    }
+
+    return;
+  }
+
+  close(s);
+
+  return;
+}
diff --git a/meta-raptor/meta-asus/recipes-asus/fblibs/files/ipmi/ipmi.h b/meta-raptor/meta-asus/recipes-asus/fblibs/files/ipmi/ipmi.h
new file mode 100644
index 0000000..4c6ed62
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/fblibs/files/ipmi/ipmi.h
@@ -0,0 +1,35 @@
+/*
+ *
+ * Copyright 2014-present Facebook. All Rights Reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __IPMI_H__
+#define __IPMI_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void ipmi_handle(unsigned char *request, unsigned char req_len,
+                 unsigned char *response, unsigned char *res_len);
+
+#ifdef __cplusplus
+} // extern "C"
+#endif
+
+#endif /* __IPMI_H__ */
diff --git a/meta-raptor/meta-asus/recipes-asus/fblibs/libalert-control_0.1.bb b/meta-raptor/meta-asus/recipes-asus/fblibs/libalert-control_0.1.bb
new file mode 100644
index 0000000..ec02d04
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/fblibs/libalert-control_0.1.bb
@@ -0,0 +1,38 @@
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+SUMMARY = "Wedge Alert Control Library"
+DESCRIPTION = "library for Wedge Alert Control"
+SECTION = "base"
+PR = "r1"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://alert_control.c;beginline=5;endline=17;md5=da35978751a9d71b73679307c4d296ec"
+
+SRC_URI = "file://alert_control \
+          "
+
+S = "${WORKDIR}/alert_control"
+
+do_install() {
+	  install -d ${D}${libdir}
+    install -m 0644 libalert_control.so ${D}${libdir}/libalert_control.so
+
+    install -d ${D}${includedir}/facebook
+    install -m 0644 alert_control.h ${D}${includedir}/facebook/alert_control.h
+}
+
+FILES_${PN} = "${libdir}/libalert_control.so"
+FILES_${PN}-dev = "${includedir}/facebook/alert_control.h"
diff --git a/meta-raptor/meta-asus/recipes-asus/fblibs/libipmi_0.1.bb b/meta-raptor/meta-asus/recipes-asus/fblibs/libipmi_0.1.bb
new file mode 100644
index 0000000..83292be
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/fblibs/libipmi_0.1.bb
@@ -0,0 +1,39 @@
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+SUMMARY = "Wedge IPMI Client Library"
+DESCRIPTION = "library for Wedge IPMI Client"
+SECTION = "base"
+PR = "r1"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://ipmi.c;beginline=8;endline=20;md5=da35978751a9d71b73679307c4d296ec"
+
+
+SRC_URI = "file://ipmi \
+          "
+
+S = "${WORKDIR}/ipmi"
+
+do_install() {
+	  install -d ${D}${libdir}
+    install -m 0644 libipmi.so ${D}${libdir}/libipmi.so
+
+    install -d ${D}${includedir}/facebook
+    install -m 0644 ipmi.h ${D}${includedir}/facebook/ipmi.h
+}
+
+FILES_${PN} = "${libdir}/libipmi.so"
+FILES_${PN}-dev = "${includedir}/facebook/ipmi.h"
diff --git a/meta-raptor/meta-asus/recipes-asus/fbutils/files/COPYING b/meta-raptor/meta-asus/recipes-asus/fbutils/files/COPYING
new file mode 100644
index 0000000..3912109
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/fbutils/files/COPYING
@@ -0,0 +1,340 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+                       51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.
diff --git a/meta-raptor/meta-asus/recipes-asus/fbutils/files/asus_power.sh b/meta-raptor/meta-asus/recipes-asus/fbutils/files/asus_power.sh
new file mode 100644
index 0000000..4810ab2
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/fbutils/files/asus_power.sh
@@ -0,0 +1,165 @@
+#!/bin/bash
+#
+# Copyright 2017 Raptor Engineering, LLC
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+. /usr/local/bin/openbmc-utils.sh
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin
+
+prog="$0"
+
+usage() {
+    echo "Usage: $prog <command> [command options]"
+    echo
+    echo "Commands:"
+    echo "  status: Get the current microserver power status"
+    echo
+    echo "  on: Power on microserver if not powered on already"
+    echo "    options:"
+    echo "      -f: Re-do power on sequence no matter if microserver has "
+    echo "          been powered on or not."
+    echo
+    echo "  off: Power off microserver ungracefully"
+    echo
+    echo "  reset: Power reset microserver ungracefully"
+    echo "    options:"
+    echo "      -s: Power reset whole wedge system ungracefully"
+    echo
+}
+
+do_status() {
+    echo -n "Mainboard power is "
+    if asus_is_us_on; then
+        echo "on"
+    else
+        echo "off"
+    fi
+    return 0
+}
+
+do_on() {
+    local force opt pulse_us n retries
+    force=0
+    while getopts "f" opt; do
+        case $opt in
+            f)
+                force=1
+                ;;
+            *)
+                usage
+                exit -1
+                ;;
+
+        esac
+    done
+    echo -n "Power on mainboard ..."
+    if [ $force -eq 0 ]; then
+        # need to check if uS is on or not
+        if asus_is_us_on 10 "."; then
+            echo " Already on. Skip!"
+            return 1
+        fi
+    fi
+    gpio_set CTL_REQ_POWERDOWN_N 1
+    gpio_set CTL_REQ_RESET_N 0
+    gpio_set CTL_REQ_POWERUP_N 0
+    sleep 1
+    gpio_set CTL_REQ_RESET_N 1
+    gpio_set CTL_REQ_POWERUP_N 1
+
+    echo " Done"
+    return 0
+}
+
+do_off() {
+    echo -n "Power off mainboard ..."
+    gpio_set CTL_REQ_RESET_N 1
+    gpio_set CTL_REQ_POWERUP_N 1
+    gpio_set CTL_REQ_POWERDOWN_N 0
+    sleep 1
+    gpio_set CTL_REQ_POWERDOWN_N 1
+    echo " Done"
+    return 0
+}
+
+do_reset() {
+    local system opt
+    system=0
+    while getopts "s" opt; do
+        case $opt in
+            s)
+                system=1
+                ;;
+            *)
+                usage
+                exit -1
+                ;;
+        esac
+    done
+    if [ $system -eq 1 ]; then
+        echo -n "Power reset whole system ..."
+        do_off
+        sleep 1
+        do_on
+    else
+        if ! asus_is_us_on; then
+            echo "Power resetting mainboard that is powered off has no effect."
+            echo "Use '$prog on' to power the microserver on"
+            return -1
+        fi
+        echo -n "Power reset mainboard ..."
+        gpio_set CTL_REQ_POWERDOWN_N 1
+        gpio_set CTL_REQ_RESET_N 0
+        gpio_set CTL_REQ_POWERUP_N 1
+        sleep 1
+        gpio_set CTL_REQ_RESET_N 1
+    fi
+    echo " Done"
+    return 0
+}
+
+if [ $# -lt 1 ]; then
+    usage
+    exit -1
+fi
+
+command="$1"
+shift
+
+case "$command" in
+    status)
+        do_status $@
+        ;;
+    on)
+        do_on $@
+        ;;
+    off)
+        do_off $@
+        ;;
+    reset)
+        do_reset $@
+        ;;
+    *)
+        usage
+        exit -1
+        ;;
+esac
+
+exit $?
diff --git a/meta-raptor/meta-asus/recipes-asus/fbutils/files/asus_us_mac.sh b/meta-raptor/meta-asus/recipes-asus/fbutils/files/asus_us_mac.sh
new file mode 100644
index 0000000..b819b6a
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/fbutils/files/asus_us_mac.sh
@@ -0,0 +1,34 @@
+#!/bin/bash
+#
+# Copyright 2017 Raptor Engineering, LLC
+# Copyright 2015-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin
+
+. /usr/local/bin/openbmc-utils.sh
+
+mac=$(fw_printenv ethaddr)
+
+if [ -n "$mac" -a "${mac/X/}" = "${mac}" ]; then
+    echo $mac
+    exit 0
+else
+    echo "Cannot determine BMC MAC" 1>&2
+    exit -1
+fi
diff --git a/meta-raptor/meta-asus/recipes-asus/fbutils/files/board-utils.sh b/meta-raptor/meta-asus/recipes-asus/fbutils/files/board-utils.sh
new file mode 100644
index 0000000..a43ad8b
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/fbutils/files/board-utils.sh
@@ -0,0 +1,45 @@
+# Copyright 2017 Raptor Engineering, LLC
+# Copyright 2015-present Facebook. All Rights Reserved.
+
+SLOT_ID=1
+
+asus_is_us_on() {
+    val=$(gpio_get STA_LINE_POWER)
+    if [ "$val" == "1" ]; then
+        return 0            # powered on
+    else
+        return 1
+    fi
+}
+
+asus_board_type() {
+    echo 'ASUS ASMB4 Platform'
+}
+
+asus_slot_id() {
+    printf "%d\n" $SLOT_ID
+}
+
+asus_board_rev() {
+    echo 0
+}
+
+# Should we enable OOB interface or not
+asus_should_enable_oob() {
+    # ASUS uses BMC MAC
+    return -1
+}
+
+asus_power_on_board() {
+    local val
+    val=$(asus_is_us_on)
+    if [[ "$val" == "1" ]]; then
+        # power on
+        gpio_set CTL_REQ_POWERDOWN_N 1
+        gpio_set CTL_REQ_RESET_N 0
+        gpio_set CTL_REQ_POWERUP_N 0
+        sleep 1
+        gpio_set CTL_REQ_RESET_N 1
+        gpio_set CTL_REQ_POWERUP_N 1
+    fi
+}
diff --git a/meta-raptor/meta-asus/recipes-asus/fbutils/files/eth0_mac_fixup.sh b/meta-raptor/meta-asus/recipes-asus/fbutils/files/eth0_mac_fixup.sh
new file mode 100644
index 0000000..f244bd0
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/fbutils/files/eth0_mac_fixup.sh
@@ -0,0 +1,55 @@
+#!/bin/bash
+#
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+### BEGIN INIT INFO
+# Provides:          eth0_mac_fixup.sh
+# Required-Start:
+# Required-Stop:
+# Default-Start:     S
+# Default-Stop:
+# Short-Description:  Fixup the MAC address for eth0 based on wedge EEPROM
+### END INIT INFO
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin
+
+# get the MAC from EEPROM
+mac=$(weutil 2>/dev/null | grep '^Local MAC' 2>/dev/null | cut -d' ' -f3 2>/dev/null)
+
+# get the MAC from u-boot environment
+ethaddr=$(fw_printenv ethaddr 2>/dev/null | cut -d'=' -f2 2>/dev/null)
+
+if [ -z "$mac" ] && [ -n "$ethaddr" ]; then
+    # no MAC from EEPROM, use the one from u-boot environment
+    mac="$ethaddr"
+fi
+
+if [ -n "$mac" ]; then
+    ifconfig eth0 hw ether $mac
+else
+    # no MAC from either EEPROM or u-boot environment
+    mac=$(ifconfig eth0 2>/dev/null |grep HWaddr 2>/dev/null |awk '{ print $5 }')
+
+fi
+
+if [ "$ethaddr" != "$mac" ]; then
+    # set the MAC from EEPROM or ifconfig back to u-boot environment so that u-boot
+    # can use it
+    fw_setenv "ethaddr" "$mac"
+fi
diff --git a/meta-raptor/meta-asus/recipes-asus/fbutils/files/mdio.py b/meta-raptor/meta-asus/recipes-asus/fbutils/files/mdio.py
new file mode 100755
index 0000000..aa7d4bf
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/fbutils/files/mdio.py
@@ -0,0 +1,124 @@
+#!/usr/bin/python
+#
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+from argparse import ArgumentParser
+import subprocess
+import time
+
+IO_BASE = [ 0x1e660000, 0x1e680000 ]
+PHYCR_REG_OFFSET = 0x60
+PHYCR_READ_BIT = 0x1 << 26
+PHYCR_WRITE_BIT = 0x1 << 27
+phycr_reg = lambda mac: IO_BASE[mac - 1] + PHYCR_REG_OFFSET
+PHYDATA_REG_OFFSET = 0x64
+phydata_reg = lambda mac: IO_BASE[mac - 1] + PHYDATA_REG_OFFSET
+
+
+devmem_read_cmd = lambda reg: [ 'devmem', hex(reg) ]
+devmem_write_cmd = lambda reg, val: [ 'devmem', hex(reg), '32', hex(val)]
+
+
+def devmem_read(reg):
+    cmd = devmem_read_cmd(reg)
+    #print('Cmd: {}'.format(cmd))
+    out = subprocess.Popen(cmd, stdout=subprocess.PIPE).communicate()[0]
+    return int(out, 0)
+
+
+def devmem_write(reg, val):
+    cmd = devmem_write_cmd(reg, val)
+    #print('Cmd: {}'.format(cmd))
+    subprocess.Popen(cmd, stdout=subprocess.PIPE).communicate()[0]
+
+
+def wait_for_mdio_done(args):
+    reg = phycr_reg(args.mac)
+    while devmem_read(reg) & (PHYCR_READ_BIT|PHYCR_WRITE_BIT):
+        time.sleep(0.010)       # 10ms
+
+
+def read_mdio(args):
+    reg = phycr_reg(args.mac)
+    ctrl = devmem_read(reg)
+    ctrl &= 0x3000003f
+    ctrl |= (args.phy & 0x1F) << 16
+    ctrl |= (args.register & 0x1F) << 21
+    ctrl |= PHYCR_READ_BIT
+    devmem_write(reg, ctrl)
+    wait_for_mdio_done(args)
+    val = devmem_read(phydata_reg(args.mac)) >> 16
+    print('Read from PHY ({}.{}): {}'
+          .format(hex(args.phy), hex(args.register), hex(val)))
+
+
+def write_mdio(args):
+    ctrl_reg = phycr_reg(args.mac)
+    ctrl = devmem_read(ctrl_reg)
+    ctrl &= 0x3000003f
+    ctrl |= (args.phy & 0x1F) << 16
+    ctrl |= (args.register & 0x1F) << 21
+    ctrl |= PHYCR_WRITE_BIT
+    data_reg = phydata_reg(args.mac)
+    # write data first
+    devmem_write(data_reg, args.value)
+    # then ctrl
+    devmem_write(ctrl_reg, ctrl)
+    wait_for_mdio_done(args)
+    print('Write to PHY ({}.{}): {}'
+          .format(hex(args.phy), hex(args.register), hex(args.value)))
+
+
+def auto_int(x):
+    return int(x, 0)
+
+if __name__ == '__main__':
+    ap = ArgumentParser()
+    ap.add_argument('--mac', '-m', type=int, default=2,
+                    help='The MAC')
+    ap.add_argument('--phy', '-p', type=auto_int, default=0x1f,
+                    help='The PHY address')
+
+    subparsers = ap.add_subparsers()
+
+    read_parser = subparsers.add_parser('read',
+                                        help='read MDIO')
+    read_parser.set_defaults(func=read_mdio)
+    read_parser.add_argument('register', type=auto_int,
+                             help='The register to read from')
+
+    write_parser = subparsers.add_parser('write',
+                                         help='write MDIO')
+    write_parser.set_defaults(func=write_mdio)
+    write_parser.add_argument('register', type=auto_int,
+                              help='The register to write to')
+    write_parser.add_argument('value', type=auto_int,
+                              help='The value to write to')
+
+    args = ap.parse_args()
+
+    if args.mac != 2 and args.mac != 1:
+        print("MAC can only be either 1 or 2.")
+        exit(-1)
+
+    if args.phy > 0x1f:
+        printf("PHY address must be smaller than 0x1f.")
+        exit(-2)
+
+    args.func(args)
diff --git a/meta-raptor/meta-asus/recipes-asus/fbutils/files/mount_data0.sh b/meta-raptor/meta-asus/recipes-asus/fbutils/files/mount_data0.sh
new file mode 100755
index 0000000..6986be5
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/fbutils/files/mount_data0.sh
@@ -0,0 +1,61 @@
+#!/bin/sh
+#
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+### BEGIN INIT INFO
+# Provides:          mount_data0
+# Required-Start:    mountvirtfs
+# Required-Stop: 
+# Default-Start:     S
+# Default-Stop:
+# Short-Description: Mount data0 partition from flash chip.
+# Description:
+### END INIT INFO
+
+. /etc/default/rcS
+
+# Find out which device maps to 'data0' on mtd
+# Note: /proc/mtd lists partitions using mtdX, where X is a number,
+#       but we mount using /dev/mtdblockX. We'll do some magic here
+#       to get the mtdX (char device) and mtdblockX (block device) 
+#       names.
+MOUNT_POINT="/mnt/data"
+DATA_CHAR_DEV=$(cat /proc/mtd | awk '{ if ($4 == "\"data0\"") print $1 }' |
+  cut -d ':' -f 1 | awk '{ print "/dev/" $1 }')
+if [ -z "$DATA_CHAR_DEV" ]
+then
+  echo "No data0 partition found. Not mounting anything to $MOUNT_POINT."
+else
+  DEVICE_ID=$(echo $DATA_CHAR_DEV | tail -c 2)
+  DATA_BLOCK_DEV=${DATA_CHAR_DEV/mtd/mtdblock}
+
+  echo "data0 partition found on $DATA_BLOCK_DEV; mounting to $MOUNT_POINT."
+  mount -t jffs2 $DATA_BLOCK_DEV $MOUNT_POINT
+
+  # if the mount failed, format the partition and remount
+  if [ $? -ne 0 ]
+  then
+    echo "Mount failed; formatting $DATA_BLOCK_DEV and remounting."
+    flash_eraseall $DATA_CHAR_DEV
+    mount -t jffs2 $DATA_BLOCK_DEV $MOUNT_POINT
+  fi
+fi
+
+: exit 0
+
diff --git a/meta-raptor/meta-asus/recipes-asus/fbutils/files/post_led.sh b/meta-raptor/meta-asus/recipes-asus/fbutils/files/post_led.sh
new file mode 100644
index 0000000..b653cb3
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/fbutils/files/post_led.sh
@@ -0,0 +1,105 @@
+#!/bin/sh
+#
+# Copyright 2004-present Facebook. All rights reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+usage() {
+    echo "Displays values onto the debug header LEDs."
+    echo "Hex and decimal accepted."
+    echo "Usage: $0 <value>"
+}
+
+. /usr/local/bin/openbmc-utils.sh
+
+# Function to set the less significant hex digit
+display_lower() {  
+    local bit0=$(expr $1 % 2)
+    local bit1=$(expr $1 / 2 % 2)
+    local bit2=$(expr $1 / 4 % 2)
+    local bit3=$(expr $1 / 8 % 2)
+    
+    # Set the pins to the correct operating mode.
+    # The relevant pins are GPIOG[0...3].
+    # For GPIO bank G, SCU84[0..3] must be 0.
+    devmem_clear_bit $(scu_addr 84) 0
+    devmem_clear_bit $(scu_addr 84) 1
+    devmem_clear_bit $(scu_addr 84) 2
+    devmem_clear_bit $(scu_addr 84) 3
+
+    # Now set the GPIOs to the right binary values
+    gpio_set 48 $bit0
+    gpio_set 49 $bit1
+    gpio_set 50 $bit2
+    gpio_set 51 $bit3
+}
+
+# Function to set the more significant hex digit
+display_upper() {
+    local bit0=$(expr $1 % 2)
+    local bit1=$(expr $1 / 2 % 2)
+    local bit2=$(expr $1 / 4 % 2)
+    local bit3=$(expr $1 / 8 % 2)
+
+    # Set the pins to the correct operating mode.
+    # The relevant pins are GPIOB[4...7].
+    # GPIOB4: SCU80[12] = 0 and Strap[14] = 0
+    # GPIOB5: SCU80[13] = 0
+    # GPIOB6: SCU80[14] = 0
+    # GPIOB7: SCU80[15] = 0
+    devmem_clear_bit $(scu_addr 70) 14
+    devmem_clear_bit $(scu_addr 80) 12
+    devmem_clear_bit $(scu_addr 80) 13
+    devmem_clear_bit $(scu_addr 80) 14
+    devmem_clear_bit $(scu_addr 80) 15
+
+    gpio_set 12 $bit0
+    gpio_set 13 $bit1
+    gpio_set 14 $bit2
+    gpio_set 15 $bit3
+}
+
+# Check number of parameters
+if [ $# -ne 1 ]
+then
+    usage
+    exit 1
+fi
+
+# Make sure input is actually numeric
+DEC_VALUE=$(printf "%d" $1 2>/dev/null)
+if [ $? -eq 1 ]
+then
+    echo "Unable to parse input as numeric value."
+    exit 1
+fi
+
+# Make sure input is within proper range
+if [ $DEC_VALUE -lt 0 ] || [ $DEC_VALUE -gt 255 ]
+then
+    echo "Value $DEC_VALUE is outside of displayable range 0 - 0xff (255)."
+    exit 1
+fi
+
+# Get upper/lower decimal values
+LOWER_DEC_VALUE=$(expr $DEC_VALUE % 16)
+UPPER_DEC_VALUE=$(expr $DEC_VALUE / 16)
+
+# Display the results
+display_lower $LOWER_DEC_VALUE
+display_upper $UPPER_DEC_VALUE
+
diff --git a/meta-raptor/meta-asus/recipes-asus/fbutils/files/power-on.sh b/meta-raptor/meta-asus/recipes-asus/fbutils/files/power-on.sh
new file mode 100644
index 0000000..c6a3c10
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/fbutils/files/power-on.sh
@@ -0,0 +1,45 @@
+#!/bin/sh
+#
+# Copyright 2017 Raptor Engineering, LLC
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+
+### BEGIN INIT INFO
+# Provides:          power-on
+# Required-Start:
+# Required-Stop:
+# Default-Start:     S
+# Default-Stop:
+# Short-Description: Power on mainboard
+### END INIT INFO
+. /usr/local/bin/openbmc-utils.sh
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin
+
+echo -n "Checking mainboard power status ... "
+if asus_is_us_on 10 "."; then
+    echo "on"
+    on=1
+else
+    echo "off"
+    on=0
+fi
+
+if [ $on -eq 0 ]; then
+    # Power on now
+    asus_power.sh on -f
+fi
diff --git a/meta-raptor/meta-asus/recipes-asus/fbutils/files/power_led.sh b/meta-raptor/meta-asus/recipes-asus/fbutils/files/power_led.sh
new file mode 100755
index 0000000..066646e
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/fbutils/files/power_led.sh
@@ -0,0 +1,49 @@
+#!/bin/bash
+#
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+usage() {
+    echo "Usage: $1 <on | off>"
+    exit -1
+}
+
+. /usr/local/bin/openbmc-utils.sh
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin
+
+set -e
+
+if [ $# != 1 ]; then
+    usage $0
+fi
+
+if [ $1 = "on" ]; then
+    val=1
+elif [ $1 = "off" ]; then
+    val=0
+else
+    usage $0
+fi
+
+# To use GPIOE5 (37), SCU80[21], SCU8C[14], and SCU70[22] must be 0
+devmem_clear_bit $(scu_addr 80) 21
+devmem_clear_bit $(scu_addr 8C) 14
+devmem_clear_bit $(scu_addr 70) 22
+
+gpio_set 37 $val
diff --git a/meta-raptor/meta-asus/recipes-asus/fbutils/files/rc.early b/meta-raptor/meta-asus/recipes-asus/fbutils/files/rc.early
new file mode 100644
index 0000000..0f47c72
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/fbutils/files/rc.early
@@ -0,0 +1,25 @@
+#!/bin/sh
+#
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+# This script will be executed at rcS S04 level, which is right after mount /mnt/data
+# and before almost anything else.
+
+if [ -x /mnt/data/etc/rc.early ]; then
+   /mnt/data/etc/rc.early
+fi
diff --git a/meta-raptor/meta-asus/recipes-asus/fbutils/files/rc.local b/meta-raptor/meta-asus/recipes-asus/fbutils/files/rc.local
new file mode 100644
index 0000000..36fa0f1
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/fbutils/files/rc.local
@@ -0,0 +1,26 @@
+#!/bin/sh
+#
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+#
+# This script will be executed *after* all the other init scripts.
+
+if [ -x /mnt/data/etc/rc.local ]; then
+   /mnt/data/etc/rc.local
+fi
diff --git a/meta-raptor/meta-asus/recipes-asus/fbutils/files/setup-gpio.sh b/meta-raptor/meta-asus/recipes-asus/fbutils/files/setup-gpio.sh
new file mode 100755
index 0000000..49f8e58
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/fbutils/files/setup-gpio.sh
@@ -0,0 +1,78 @@
+#!/bin/bash
+#
+# Copyright 2017 Raptor Engineering, LLC
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+### BEGIN INIT INFO
+# Provides:          gpio-setup
+# Required-Start:
+# Required-Stop:
+# Default-Start:     S
+# Default-Stop:
+# Short-Description:  Set up GPIO pins as appropriate
+### END INIT INFO
+
+# This file contains definitions for the GPIO pins that were not otherwise
+# defined in other files.  We should probably move some more of the
+# definitions to this file at some point.
+
+# The commented-out sections are generally already defined elsewhere,
+# and defining them twice generates errors.
+
+. /usr/local/bin/openbmc-utils.sh
+
+# echo 4 > /sys/class/gpio/export
+# echo 9 > /sys/class/gpio/export
+# echo 14 > /sys/class/gpio/export
+# echo 33 > /sys/class/gpio/export
+# echo 34 > /sys/class/gpio/export
+# echo 35 > /sys/class/gpio/export
+# echo 40 > /sys/class/gpio/export
+# echo 42 > /sys/class/gpio/export
+# echo 44 > /sys/class/gpio/export
+# echo 45 > /sys/class/gpio/export
+# echo 48 > /sys/class/gpio/export
+# echo 49 > /sys/class/gpio/export
+# echo 58 > /sys/class/gpio/export
+echo "out" > /sys/class/gpio/gpio4/direction
+echo "out" > /sys/class/gpio/gpio9/direction
+echo "out" > /sys/class/gpio/gpio14/direction
+echo "out" > /sys/class/gpio/gpio33/direction
+echo "out" > /sys/class/gpio/gpio34/direction
+echo "out" > /sys/class/gpio/gpio35/direction
+echo "out" > /sys/class/gpio/gpio40/direction
+echo "out" > /sys/class/gpio/gpio44/direction
+echo "out" > /sys/class/gpio/gpio45/direction
+echo "out" > /sys/class/gpio/gpio48/direction
+echo "in"  > /sys/class/gpio/gpio49/direction
+echo "in"  > /sys/class/gpio/gpio58/direction
+
+# Once we set "out", output values will be random unless we set them
+# to something
+
+echo "1" > /sys/class/gpio/gpio4/value
+echo "1" > /sys/class/gpio/gpio9/value
+echo "1" > /sys/class/gpio/gpio14/value
+echo "1" > /sys/class/gpio/gpio33/value
+echo "1" > /sys/class/gpio/gpio34/value
+echo "1" > /sys/class/gpio/gpio35/value
+echo "1" > /sys/class/gpio/gpio40/value
+echo "1" > /sys/class/gpio/gpio44/value
+echo "1" > /sys/class/gpio/gpio45/value
+echo "1" > /sys/class/gpio/gpio48/value
diff --git a/meta-raptor/meta-asus/recipes-asus/fbutils/files/setup_switch.py b/meta-raptor/meta-asus/recipes-asus/fbutils/files/setup_switch.py
new file mode 100644
index 0000000..995cec8
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/fbutils/files/setup_switch.py
@@ -0,0 +1,49 @@
+#!/usr/bin/python
+#
+# Copyright 2004-present Facebook. All rights reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+# This script combines multiple switch configuration into one python script.
+# All such configuration can be done directly through bcm5396_util.py.
+# But, it turns out it took several seconds to just start the python script.
+# Involking the script 16 times (2 to create vlan, 13 to set port vlan default,
+# and 1 to enable vlan function) contributes 1 minute delay.
+
+from bcm5396 import Bcm5396
+
+MDC_GPIO = 6
+MDIO_GPIO = 7
+
+INTERNAL_VLAN = 4088
+DEFAULT_VLAN=4090
+
+INTERNAL_PORTS = [3, 10, 1, 11, 0, 8, 2, 9, 4, 12, 14, 13]
+FRONT_PORT=5
+
+if __name__ == '__main__':
+    bcm = Bcm5396(Bcm5396.MDIO_ACCESS, mdc=MDC_GPIO, mdio=MDIO_GPIO)
+    # create default VLAN including internal ports and front panel
+    # port (un-tagged)
+    bcm.add_vlan(DEFAULT_VLAN, INTERNAL_PORTS + [FRONT_PORT],
+                  INTERNAL_PORTS + [FRONT_PORT], 0)
+    # set ingress vlan for internal ports and front panel port to default vlan
+    for port in INTERNAL_PORTS + [FRONT_PORT]:
+        bcm.vlan_set_port_default(port, DEFAULT_VLAN, 0)
+    # create internal vlan including internal ports only (tagged)
+    bcm.add_vlan(INTERNAL_VLAN, [], INTERNAL_PORTS, 0)
+    # enable vlan
+    bcm.vlan_ctrl(True)
diff --git a/meta-raptor/meta-asus/recipes-asus/fbutils/files/sol.sh b/meta-raptor/meta-asus/recipes-asus/fbutils/files/sol.sh
new file mode 100755
index 0000000..2998c81
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/fbutils/files/sol.sh
@@ -0,0 +1,44 @@
+#!/bin/sh
+#
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+CONSOLE_SH=/usr/local/bin/us_console.sh
+FILE=/etc/us_pseudo_tty
+TTY=/dev/ttyS1
+
+if [ -a $FILE ]
+  then
+    read -r TTY<$FILE
+fi
+
+$CONSOLE_SH connect
+
+echo "You are in SOL session."
+echo "Use ctrl-x to quit."
+echo "-----------------------"
+echo
+
+trap '"$CONSOLE_SH" disconnect' INT TERM QUIT EXIT
+
+/usr/bin/microcom -s 57600 $TTY
+
+echo
+echo
+echo "-----------------------"
+echo "Exit from SOL session."
diff --git a/meta-raptor/meta-asus/recipes-asus/fbutils/files/src/include/i2c-dev.h b/meta-raptor/meta-asus/recipes-asus/fbutils/files/src/include/i2c-dev.h
new file mode 100644
index 0000000..eefb6e4
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/fbutils/files/src/include/i2c-dev.h
@@ -0,0 +1,362 @@
+/*
+    i2c-dev.h - i2c-bus driver, char device interface
+
+    Copyright (C) 1995-97 Simon G. Vogl
+    Copyright (C) 1998-99 Frodo Looijaard <frodol@dds.nl>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+    MA 02110-1301 USA.
+*/
+
+#ifndef _LINUX_I2C_DEV_H
+#define _LINUX_I2C_DEV_H
+
+#include <linux/types.h>
+#include <sys/ioctl.h>
+#include <stddef.h>
+#include <string.h>
+
+
+/* -- i2c.h -- */
+
+#define _I2C_MIN(a, b) (((a) <= (b)) ? (a) : (b))
+
+/*
+ * I2C Message - used for pure i2c transaction, also from /dev interface
+ */
+struct i2c_msg {
+	__u16 addr;	/* slave address			*/
+	unsigned short flags;
+#define I2C_CLIENT_PEC	0x04		/* Use Packet Error Checking */
+#define I2C_M_TEN		0x0010	/* this is a ten bit chip address */
+#define I2C_M_RD		0x0001	/* read data, from slave to master */
+#define I2C_M_NOSTART		0x4000	/* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_REV_DIR_ADDR	0x2000	/* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_IGNORE_NAK	0x1000	/* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_NO_RD_ACK		0x0800	/* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_RECV_LEN		0x0400	/* length will be first received byte */
+	short len;		/* msg length				*/
+	char *buf;		/* pointer to msg data			*/
+};
+
+/* To determine what functionality is present */
+
+#define I2C_FUNC_I2C			0x00000001
+#define I2C_FUNC_10BIT_ADDR		0x00000002
+#define I2C_FUNC_PROTOCOL_MANGLING	0x00000004 /* I2C_M_{REV_DIR_ADDR,NOSTART,..} */
+#define I2C_FUNC_SMBUS_PEC		0x00000008
+#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL	0x00008000 /* SMBus 2.0 */
+#define I2C_FUNC_SMBUS_QUICK		0x00010000
+#define I2C_FUNC_SMBUS_READ_BYTE	0x00020000
+#define I2C_FUNC_SMBUS_WRITE_BYTE	0x00040000
+#define I2C_FUNC_SMBUS_READ_BYTE_DATA	0x00080000
+#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA	0x00100000
+#define I2C_FUNC_SMBUS_READ_WORD_DATA	0x00200000
+#define I2C_FUNC_SMBUS_WRITE_WORD_DATA	0x00400000
+#define I2C_FUNC_SMBUS_PROC_CALL	0x00800000
+#define I2C_FUNC_SMBUS_READ_BLOCK_DATA	0x01000000
+#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
+#define I2C_FUNC_SMBUS_READ_I2C_BLOCK	0x04000000 /* I2C-like block xfer  */
+#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK	0x08000000 /* w/ 1-byte reg. addr. */
+
+#define I2C_FUNC_SMBUS_BYTE (I2C_FUNC_SMBUS_READ_BYTE | \
+                             I2C_FUNC_SMBUS_WRITE_BYTE)
+#define I2C_FUNC_SMBUS_BYTE_DATA (I2C_FUNC_SMBUS_READ_BYTE_DATA | \
+                                  I2C_FUNC_SMBUS_WRITE_BYTE_DATA)
+#define I2C_FUNC_SMBUS_WORD_DATA (I2C_FUNC_SMBUS_READ_WORD_DATA | \
+                                  I2C_FUNC_SMBUS_WRITE_WORD_DATA)
+#define I2C_FUNC_SMBUS_BLOCK_DATA (I2C_FUNC_SMBUS_READ_BLOCK_DATA | \
+                                   I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)
+#define I2C_FUNC_SMBUS_I2C_BLOCK (I2C_FUNC_SMBUS_READ_I2C_BLOCK | \
+                                  I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)
+
+/* Old name, for compatibility */
+#define I2C_FUNC_SMBUS_HWPEC_CALC	I2C_FUNC_SMBUS_PEC
+
+/*
+ * Data for SMBus Messages
+ */
+#define I2C_SMBUS_BLOCK_MAX	32	/* As specified in SMBus standard */
+#define I2C_SMBUS_I2C_BLOCK_MAX	32	/* Not specified but we use same structure */
+union i2c_smbus_data {
+	__u8 byte;
+	__u16 word;
+	__u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */
+	                                            /* and one more for PEC */
+};
+
+#define I2C_SMBUS_BLOCK_LARGE_MAX	240
+union i2c_smbus_large_data {
+  union i2c_smbus_data data;
+  __u8 block[I2C_SMBUS_BLOCK_LARGE_MAX + 2]; /* block[0] is used for length */
+                                             /* and one more for PEC */
+};
+
+/* smbus_access read or write markers */
+#define I2C_SMBUS_READ	1
+#define I2C_SMBUS_WRITE	0
+
+/* SMBus transaction types (size parameter in the above functions)
+   Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */
+#define I2C_SMBUS_QUICK		    0
+#define I2C_SMBUS_BYTE		    1
+#define I2C_SMBUS_BYTE_DATA	    2
+#define I2C_SMBUS_WORD_DATA	    3
+#define I2C_SMBUS_PROC_CALL	    4
+#define I2C_SMBUS_BLOCK_DATA	    5
+#define I2C_SMBUS_I2C_BLOCK_BROKEN  6
+#define I2C_SMBUS_BLOCK_PROC_CALL   7		/* SMBus 2.0 */
+#define I2C_SMBUS_I2C_BLOCK_DATA    8
+#define I2C_SMBUS_BLOCK_LARGE_DATA    9
+
+
+/* /dev/i2c-X ioctl commands.  The ioctl's parameter is always an
+ * unsigned long, except for:
+ *	- I2C_FUNCS, takes pointer to an unsigned long
+ *	- I2C_RDWR, takes pointer to struct i2c_rdwr_ioctl_data
+ *	- I2C_SMBUS, takes pointer to struct i2c_smbus_ioctl_data
+ */
+#define I2C_RETRIES	0x0701	/* number of times a device address should
+				   be polled when not acknowledging */
+#define I2C_TIMEOUT	0x0702	/* set timeout in units of 10 ms */
+
+/* NOTE: Slave address is 7 or 10 bits, but 10-bit addresses
+ * are NOT supported! (due to code brokenness)
+ */
+#define I2C_SLAVE	0x0703	/* Use this slave address */
+#define I2C_SLAVE_FORCE	0x0706	/* Use this slave address, even if it
+				   is already in use by a driver! */
+#define I2C_TENBIT	0x0704	/* 0 for 7 bit addrs, != 0 for 10 bit */
+
+#define I2C_FUNCS	0x0705	/* Get the adapter functionality mask */
+
+#define I2C_RDWR	0x0707	/* Combined R/W transfer (one STOP only) */
+
+#define I2C_PEC		0x0708	/* != 0 to use PEC with SMBus */
+#define I2C_SMBUS	0x0720	/* SMBus transfer */
+
+
+/* This is the structure as used in the I2C_SMBUS ioctl call */
+struct i2c_smbus_ioctl_data {
+	__u8 read_write;
+	__u8 command;
+	__u32 size;
+	union i2c_smbus_data *data;
+};
+
+/* This is the structure as used in the I2C_RDWR ioctl call */
+struct i2c_rdwr_ioctl_data {
+	struct i2c_msg *msgs;	/* pointers to i2c_msgs */
+	__u32 nmsgs;			/* number of i2c_msgs */
+};
+
+#define  I2C_RDRW_IOCTL_MAX_MSGS	42
+
+
+static inline __s32 i2c_smbus_access(int file, char read_write, __u8 command,
+                                     int size, union i2c_smbus_data *data)
+{
+	struct i2c_smbus_ioctl_data args;
+
+	args.read_write = read_write;
+	args.command = command;
+	args.size = size;
+	args.data = data;
+	return ioctl(file,I2C_SMBUS,&args);
+}
+
+
+static inline __s32 i2c_smbus_write_quick(int file, __u8 value)
+{
+	return i2c_smbus_access(file,value,0,I2C_SMBUS_QUICK,NULL);
+}
+
+static inline __s32 i2c_smbus_read_byte(int file)
+{
+	union i2c_smbus_data data;
+	if (i2c_smbus_access(file,I2C_SMBUS_READ,0,I2C_SMBUS_BYTE,&data))
+		return -1;
+	else
+		return 0x0FF & data.byte;
+}
+
+static inline __s32 i2c_smbus_write_byte(int file, __u8 value)
+{
+	return i2c_smbus_access(file,I2C_SMBUS_WRITE,value,
+	                        I2C_SMBUS_BYTE,NULL);
+}
+
+static inline __s32 i2c_smbus_read_byte_data(int file, __u8 command)
+{
+	union i2c_smbus_data data;
+	if (i2c_smbus_access(file,I2C_SMBUS_READ,command,
+	                     I2C_SMBUS_BYTE_DATA,&data))
+		return -1;
+	else
+		return 0x0FF & data.byte;
+}
+
+static inline __s32 i2c_smbus_write_byte_data(int file, __u8 command,
+                                              __u8 value)
+{
+	union i2c_smbus_data data;
+	data.byte = value;
+	return i2c_smbus_access(file,I2C_SMBUS_WRITE,command,
+	                        I2C_SMBUS_BYTE_DATA, &data);
+}
+
+static inline __s32 i2c_smbus_read_word_data(int file, __u8 command)
+{
+	union i2c_smbus_data data;
+	if (i2c_smbus_access(file,I2C_SMBUS_READ,command,
+	                     I2C_SMBUS_WORD_DATA,&data))
+		return -1;
+	else
+		return 0x0FFFF & data.word;
+}
+
+static inline __s32 i2c_smbus_write_word_data(int file, __u8 command,
+                                              __u16 value)
+{
+	union i2c_smbus_data data;
+	data.word = value;
+	return i2c_smbus_access(file,I2C_SMBUS_WRITE,command,
+	                        I2C_SMBUS_WORD_DATA, &data);
+}
+
+static inline __s32 i2c_smbus_process_call(int file, __u8 command, __u16 value)
+{
+	union i2c_smbus_data data;
+	data.word = value;
+	if (i2c_smbus_access(file,I2C_SMBUS_WRITE,command,
+	                     I2C_SMBUS_PROC_CALL,&data))
+		return -1;
+	else
+		return 0x0FFFF & data.word;
+}
+
+
+/* Returns the number of read bytes */
+static inline __s32 i2c_smbus_read_block_data(int file, __u8 command,
+                                              __u8 *values)
+{
+	union i2c_smbus_data data;
+	if (i2c_smbus_access(file,I2C_SMBUS_READ,command,
+	                     I2C_SMBUS_BLOCK_DATA,&data))
+		return -1;
+	else {
+		memcpy(values, &data.block[1], _I2C_MIN(data.block[0], I2C_SMBUS_BLOCK_MAX));
+		return data.block[0];
+	}
+}
+
+static inline __s32 i2c_smbus_write_block_data(int file, __u8 command,
+                                               __u8 length, const __u8 *values)
+{
+	union i2c_smbus_data data;
+	if (length > 32)
+		length = 32;
+	memcpy(&data.block[1], values, length);
+	data.block[0] = length;
+	return i2c_smbus_access(file,I2C_SMBUS_WRITE,command,
+	                        I2C_SMBUS_BLOCK_DATA, &data);
+}
+
+static inline __s32 i2c_smbus_read_block_large_data(int file, __u8 command,
+                                                    __u8 *values)
+{
+  union i2c_smbus_large_data data;
+  if (i2c_smbus_access(file, I2C_SMBUS_READ, command,
+                       I2C_SMBUS_BLOCK_LARGE_DATA,
+                       (union i2c_smbus_data *)&data)) {
+    return -1;
+  } else {
+    /* the first byte is the length which is not copied */
+    memcpy(values, &data.block[1], _I2C_MIN(data.block[0], I2C_SMBUS_BLOCK_LARGE_MAX));
+    return data.block[0];
+  }
+}
+
+static inline __s32 i2c_smbus_write_block_large_data(int file, __u8 command,
+                                                     __u8 length,
+                                                     const __u8 *values)
+{
+  union i2c_smbus_large_data data;
+  if (length > I2C_SMBUS_BLOCK_LARGE_MAX) {
+    length = I2C_SMBUS_BLOCK_LARGE_MAX;
+  }
+  data.block[0] = length;
+  memcpy(&data.block[1], values, length);
+  return i2c_smbus_access(file, I2C_SMBUS_WRITE, command,
+                          I2C_SMBUS_BLOCK_LARGE_DATA,
+                          (union i2c_smbus_data *)&data);
+}
+
+/* Returns the number of read bytes */
+/* Until kernel 2.6.22, the length is hardcoded to 32 bytes. If you
+   ask for less than 32 bytes, your code will only work with kernels
+   2.6.23 and later. */
+static inline __s32 i2c_smbus_read_i2c_block_data(int file, __u8 command,
+                                                  __u8 length, __u8 *values)
+{
+	union i2c_smbus_data data;
+
+	if (length > 32)
+		length = 32;
+	data.block[0] = length;
+	if (i2c_smbus_access(file,I2C_SMBUS_READ,command,
+	                     length == 32 ? I2C_SMBUS_I2C_BLOCK_BROKEN :
+	                      I2C_SMBUS_I2C_BLOCK_DATA,&data))
+		return -1;
+	else {
+		memcpy(values, &data.block[1], _I2C_MIN(data.block[0], I2C_SMBUS_BLOCK_MAX));
+		return data.block[0];
+	}
+}
+
+static inline __s32 i2c_smbus_write_i2c_block_data(int file, __u8 command,
+                                                   __u8 length,
+                                                   const __u8 *values)
+{
+	union i2c_smbus_data data;
+	if (length > 32)
+		length = 32;
+	memcpy(&data.block[1], values, length);
+	data.block[0] = length;
+	return i2c_smbus_access(file,I2C_SMBUS_WRITE,command,
+	                        I2C_SMBUS_I2C_BLOCK_BROKEN, &data);
+}
+
+/* Returns the number of read bytes */
+static inline __s32 i2c_smbus_block_process_call(int file, __u8 command,
+                                                 __u8 length, __u8 *values)
+{
+	union i2c_smbus_data data;
+	if (length > 32)
+		length = 32;
+	memcpy(&data.block[1], values, length);
+	data.block[0] = length;
+	if (i2c_smbus_access(file,I2C_SMBUS_WRITE,command,
+	                     I2C_SMBUS_BLOCK_PROC_CALL,&data))
+		return -1;
+	else {
+		memcpy(values, &data.block[1], _I2C_MIN(data.block[0], I2C_SMBUS_BLOCK_MAX));
+		return data.block[0];
+	}
+}
+
+#undef _I2C_MIN
+
+#endif /* _LINUX_I2C_DEV_H */
diff --git a/meta-raptor/meta-asus/recipes-asus/fbutils/files/start_us_monitor.sh b/meta-raptor/meta-asus/recipes-asus/fbutils/files/start_us_monitor.sh
new file mode 100644
index 0000000..773afad
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/fbutils/files/start_us_monitor.sh
@@ -0,0 +1,74 @@
+#! /bin/sh
+#
+# Copyright 2017 Raptor Engineering, LLC
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+### BEGIN INIT INFO
+# Provides:          us-monitor
+# Required-Start:
+# Required-Stop:
+# Default-Start:     S
+# Default-Stop:      0 6
+# Short-Description: Start the mainboard reset monitoring script
+#
+### END INIT INFO
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin
+NAME="us_monitor"
+DESC="monitoring mainboard reset"
+DAEMON="us_monitor.sh"
+
+# source function library
+. /etc/init.d/functions
+
+. /usr/local/bin/openbmc-utils.sh
+
+STOPPER=
+ACTION="$1"
+
+case "$ACTION" in
+  start)
+    echo -n "Starting $DESC: "
+    /usr/local/bin/${DAEMON} > /dev/null 2>&1 &
+    echo "$NAME."
+    ;;
+  stop)
+    echo -n "Stopping $DESC: "
+    killall ${DAEMON}
+    echo "$NAME."
+    ;;
+  restart|force-reload)
+    echo -n "Restarting $DESC: "
+    killall ${DAEMON}
+    /usr/local/bin/${DAEMON} > /dev/null 2>&1 &
+    echo "$NAME."
+    ;;
+  status)
+    status ${DAEMON}
+    exit $?
+    ;;
+  *)
+    N=${0##*/}
+    N=${N#[SK]??}
+    echo "Usage: $N {start|stop|status|restart|force-reload}" >&2
+    exit 1
+    ;;
+esac
+
+exit 0
diff --git a/meta-raptor/meta-asus/recipes-asus/fbutils/files/us_console.sh b/meta-raptor/meta-asus/recipes-asus/fbutils/files/us_console.sh
new file mode 100755
index 0000000..75bbcea
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/fbutils/files/us_console.sh
@@ -0,0 +1,47 @@
+#!/bin/sh
+#
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+usage() {
+    echo "$0 <connect | disconnect>"
+}
+
+. /usr/local/bin/openbmc-utils.sh
+
+if [ $# -ne 1 ]; then
+    usage
+    exit 1
+fi
+
+if [ "$1" == "connect" ]; then
+    VALUE=1
+elif [ "$1" == "disconnect" ]; then
+    VALUE=0
+else
+    usage
+    exit 1
+fi
+
+# GPIOE0 (32) controls if uS console connects to UART1 or not.
+# To enable GPIOE0, SCU80[16], SCU8C[12], and SCU70[22] must be 0
+devmem_clear_bit $(scu_addr 80) 16
+devmem_clear_bit $(scu_addr 8C) 12
+devmem_clear_bit $(scu_addr 70) 22
+
+gpio_set 32 $VALUE
diff --git a/meta-raptor/meta-asus/recipes-asus/fbutils/files/us_monitor.sh b/meta-raptor/meta-asus/recipes-asus/fbutils/files/us_monitor.sh
new file mode 100644
index 0000000..bb47539
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/fbutils/files/us_monitor.sh
@@ -0,0 +1,34 @@
+#!/bin/bash
+#
+# Copyright 2017 Raptor Engineering, LLC
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+
+. /usr/local/bin/openbmc-utils.sh
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin
+
+# Blink the BMC status LED
+while true; do
+    gpio_set LED_STA_BMC_N 0
+    usleep 50000		# 50ms
+    gpio_set LED_STA_BMC_N 1
+    usleep 100000		# 100ms
+    gpio_set LED_STA_BMC_N 0
+    usleep 50000		# 50ms
+    gpio_set LED_STA_BMC_N 1
+    usleep 700000		# 800ms
+done
diff --git a/meta-raptor/meta-asus/recipes-asus/fbutils/openbmc-utils_%.bbappend b/meta-raptor/meta-asus/recipes-asus/fbutils/openbmc-utils_%.bbappend
new file mode 100644
index 0000000..ed49a3b
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/fbutils/openbmc-utils_%.bbappend
@@ -0,0 +1,51 @@
+# Copyright 2017 Raptor Engineering, LLC
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+SRC_URI += "file://board-utils.sh \
+           file://us_console.sh \
+           file://sol.sh \
+           file://power_led.sh \
+           file://post_led.sh \
+           file://setup-gpio.sh \
+           file://mdio.py \
+           file://mount_data0.sh \
+           file://asus_power.sh \
+           file://power-on.sh \
+           file://asus_us_mac.sh \
+           file://rc.early \
+           file://rc.local \
+           file://src \
+           file://start_us_monitor.sh \
+           file://us_monitor.sh \
+           file://eth0_mac_fixup.sh \
+          "
+
+OPENBMC_UTILS_FILES += " \
+  board-utils.sh us_console.sh sol.sh power_led.sh post_led.sh \
+  mdio.py asus_power.sh asus_us_mac.sh us_monitor.sh \
+  "
+
+DEPENDS_append = " update-rc.d-native"
+
+do_install_append() {
+  do_install_board
+}
+
+FILES_${PN} += "${sysconfdir}"
diff --git a/meta-raptor/meta-asus/recipes-asus/ipmid/files/Makefile b/meta-raptor/meta-asus/recipes-asus/ipmid/files/Makefile
new file mode 100644
index 0000000..c65c3c5
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/ipmid/files/Makefile
@@ -0,0 +1,29 @@
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+
+all: ipmid
+
+ipmid: ipmid.c \
+	platform/timestamp.c platform/sel.c platform/sdr.c \
+	platform/wedge/sensor.c \
+	platform/wedge/fruid.c
+	$(CC) -pthread -std=c99 -o $@ $^ $(LDFLAGS)
+
+.PHONY: clean
+
+clean:
+	rm -rf *.o platform/*.o platform/wedge/*.o ipmid
diff --git a/meta-raptor/meta-asus/recipes-asus/ipmid/files/ipmid.c b/meta-raptor/meta-asus/recipes-asus/ipmid/files/ipmid.c
new file mode 100644
index 0000000..ed2b75f
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/ipmid/files/ipmid.c
@@ -0,0 +1,1490 @@
+/*
+ *
+ * Copyright 2014-present Facebook. All Rights Reserved.
+ *
+ * This file contains code to support IPMI2.0 Specificaton available @
+ * http://www.intel.com/content/www/us/en/servers/ipmi/ipmi-specifications.html
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "platform/sdr.h"
+#include "platform/sel.h"
+#include "platform/fruid.h"
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <errno.h>
+#include <syslog.h>
+#include <string.h>
+#include <pthread.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <sys/un.h>
+
+#define SOCK_PATH "/tmp/ipmi_socket"
+
+#define MAX_NUM_DIMMS 4
+#define IPMI_SEL_VERSION  0x51
+#define IPMI_SDR_VERSION  0x51
+
+#define SIZE_AUTH_ENABLES 5
+#define SIZE_IP_ADDR  4
+#define SIZE_MAC_ADDR 6
+#define SIZE_NET_MASK 4
+#define SIZE_IP_HDR 3
+#define SIZE_RMCP_PORT  2
+#define SIZE_COMMUNITY_STR 18
+#define SIZE_DEST_TYPE  4
+#define SIZE_DEST_ADDR  18
+#define SIZE_TIME_STAMP 4
+
+#define SIZE_PROC_FREQ  2
+#define SIZE_DIMM_SPEED 2
+#define SIZE_DIMM_SIZE  2
+
+#define SIZE_SYSFW_VER  17
+#define SIZE_SYS_NAME 17
+#define SIZE_OS_NAME  17
+#define SIZE_OS_VER 17
+#define SIZE_BMC_URL  17
+#define SIZE_OS_HV_URL  17
+
+#define SIZE_SEL_REC 16
+#define SIZE_IPMI_RES_HDR 3
+
+#define MAX_IPMI_MSG_SIZE 100
+
+// IPMI request Structure (IPMI/Section 9.2)
+typedef struct
+{
+  unsigned char netfn_lun;
+  unsigned char cmd;
+  unsigned char data[];
+} ipmi_req_t;
+
+// IPMI response Structure (IPMI/Section 9.3)
+typedef struct
+{
+  unsigned char netfn_lun;
+  unsigned char cmd;
+  unsigned char cc;
+  unsigned char data[];
+} ipmi_res_t;
+
+// LAN Configuration Structure (IPMI/Table 23.4)
+typedef struct
+{
+  unsigned char set_in_prog;
+  unsigned char auth_support;
+  unsigned char auth_enables[SIZE_AUTH_ENABLES];
+  unsigned char ip_addr[SIZE_IP_ADDR];
+  unsigned char ip_src;
+  unsigned char mac_addr[SIZE_MAC_ADDR];
+  unsigned char net_mask[SIZE_NET_MASK];
+  unsigned char ip_hdr[SIZE_IP_HDR];
+  unsigned char pri_rmcp_port[SIZE_RMCP_PORT];
+  unsigned char sec_rmcp_port[SIZE_RMCP_PORT];
+  unsigned char arp_ctrl;
+  unsigned char garp_interval;
+  unsigned char df_gw_ip_addr[SIZE_IP_ADDR];
+  unsigned char df_gw_mac_addr[SIZE_MAC_ADDR];
+  unsigned char back_gw_ip_addr[SIZE_IP_ADDR];
+  unsigned char back_gw_mac_addr[SIZE_MAC_ADDR];
+  unsigned char community_str[SIZE_COMMUNITY_STR];
+  unsigned char no_of_dest;
+  unsigned char dest_type[SIZE_DEST_TYPE];
+  unsigned char dest_addr[SIZE_DEST_ADDR];
+} lan_config_t;
+
+// Structure to store Processor Information
+typedef struct
+{
+  unsigned char type;
+  unsigned char freq[SIZE_PROC_FREQ];
+} proc_info_t;
+
+// Structure to store DIMM Information
+typedef struct
+{
+  unsigned char type;
+  unsigned char speed[SIZE_DIMM_SPEED];
+  unsigned char size[SIZE_DIMM_SIZE];
+} dimm_info_t;
+
+// Structure for System Info Params (IPMI/Section 22.14a)
+typedef struct
+{
+  unsigned char set_in_prog;
+  unsigned char sysfw_ver[SIZE_SYSFW_VER];
+  unsigned char sys_name[SIZE_SYS_NAME];
+  unsigned char pri_os_name[SIZE_OS_NAME];
+  unsigned char present_os_name[SIZE_OS_NAME];
+  unsigned char present_os_ver[SIZE_OS_VER];
+  unsigned char bmc_url[SIZE_BMC_URL];
+  unsigned char os_hv_url[SIZE_OS_HV_URL];
+} sys_info_param_t;
+
+// Network Function Codes (IPMI/Section 5.1)
+enum
+{
+  NETFN_CHASSIS_REQ = 0x00,
+  NETFN_CHASSIS_RES,
+  NETFN_BRIDGE_REQ,
+  NETFN_BRIDGE_RES,
+  NETFN_SENSOR_REQ,
+  NETFN_SENSOR_RES,
+  NETFN_APP_REQ,
+  NETFN_APP_RES,
+  NETFN_FIRMWARE_REQ,
+  NETFN_FIRMWARE_RES,
+  NETFN_STORAGE_REQ,
+  NETFN_STORAGE_RES,
+  NETFN_TRANSPORT_REQ,
+  NETFN_TRANSPORT_RES,
+  NETFN_OEM_REQ = 0x30,
+  NETFN_OEM_RES = 0x31,
+};
+
+// Chassis Command Codes (IPMI/Table H-1)
+enum
+{
+  CMD_CHASSIS_GET_STATUS = 0x01,
+  CMD_CHASSIS_GET_BOOT_OPTIONS = 0x09,
+};
+
+// Application Command Codes (IPMI/Table H-1)
+enum
+{
+  CMD_APP_GET_DEVICE_ID = 0x01,
+  CMD_APP_GET_SELFTEST_RESULTS = 0x04,
+  CMD_APP_GET_DEVICE_GUID = 0x08,
+  CMD_APP_RESET_WDT = 0x22,
+  CMD_APP_SET_WDT = 0x24,
+  CMD_APP_GET_WDT = 0x25,
+  CMD_APP_GET_GLOBAL_ENABLES = 0x2F,
+  CMD_APP_GET_SYSTEM_GUID = 0x37,
+  CMD_APP_SET_SYS_INFO_PARAMS = 0x58,
+  CMD_APP_GET_SYS_INFO_PARAMS = 0x59,
+};
+
+// Storage Command Codes (IPMI/Table H-1)
+enum
+{
+  CMD_STORAGE_GET_FRUID_INFO = 0x10,
+  CMD_STORAGE_READ_FRUID_DATA = 0x11,
+  CMD_STORAGE_GET_SDR_INFO = 0x20,
+  CMD_STORAGE_RSV_SDR = 0x22,
+  CMD_STORAGE_GET_SDR = 0x23,
+  CMD_STORAGE_GET_SEL_INFO = 0x40,
+  CMD_STORAGE_RSV_SEL = 0x42,
+  CMD_STORAGE_GET_SEL = 0x43,
+  CMD_STORAGE_ADD_SEL = 0x44,
+  CMD_STORAGE_CLR_SEL = 0x47,
+  CMD_STORAGE_GET_SEL_TIME = 0x48,
+  CMD_STORAGE_GET_SEL_UTC = 0x5C,
+};
+
+// Transport Command Codes (IPMI/Table H-1)
+enum
+{
+  CMD_TRANSPORT_SET_LAN_CONFIG = 0x01,
+  CMD_TRANSPORT_GET_LAN_CONFIG = 0x02,
+};
+
+// OEM Command Codes (Quanta/FB defined commands)
+enum
+{
+  CMD_OEM_SET_PROC_INFO = 0x1A,
+  CMD_OEM_SET_DIMM_INFO = 0x1C,
+  CMD_OEM_SET_POST_START = 0x73,
+  CMD_OEM_SET_POST_END = 0x74,
+};
+
+// IPMI command Completion Codes (IPMI/Section 5.2)
+enum
+{
+  CC_SUCCESS = 0x00,
+  CC_INVALID_PARAM = 0x80,
+  CC_SEL_ERASE_PROG = 0x81,
+  CC_INVALID_CMD = 0xC1,
+  CC_PARAM_OUT_OF_RANGE = 0xC9,
+  CC_UNSPECIFIED_ERROR = 0xFF,
+};
+
+// LAN Configuration parameters (IPMI/Table 23-4)
+enum
+{
+  LAN_PARAM_SET_IN_PROG,
+  LAN_PARAM_AUTH_SUPPORT,
+  LAN_PARAM_AUTH_ENABLES,
+  LAN_PARAM_IP_ADDR,
+  LAN_PARAM_IP_SRC,
+  LAN_PARAM_MAC_ADDR,
+  LAN_PARAM_NET_MASK,
+  LAN_PARAM_IP_HDR,
+  LAN_PARAM_PRI_RMCP_PORT,
+  LAN_PARAM_SEC_RMCP_PORT,
+  LAN_PARAM_ARP_CTRL,
+  LAN_PARAM_GARP_INTERVAL,
+  LAN_PARAM_DF_GW_IP_ADDR,
+  LAN_PARAM_DF_GW_MAC_ADDR,
+  LAN_PARAM_BACK_GW_IP_ADDR,
+  LAN_PARAM_BACK_GW_MAC_ADDR,
+  LAN_PARAM_COMMUNITY_STR,
+  LAN_PARAM_NO_OF_DEST,
+  LAN_PARAM_DEST_TYPE,
+  LAN_PARAM_DEST_ADDR,
+};
+
+// Boot Option Parameters (IPMI/Table 28-14)
+enum
+{
+  PARAM_SET_IN_PROG = 0x00,
+  PARAM_SVC_PART_SELECT,
+  PARAM_SVC_PART_SCAN,
+  PARAM_BOOT_FLAG_CLR,
+  PARAM_BOOT_INFO_ACK,
+  PARAM_BOOT_FLAGS,
+  PARAM_BOOT_INIT_INFO,
+};
+
+//System Info Parameters (IPMI/Table 22-16c)
+enum
+{
+  SYS_INFO_PARAM_SET_IN_PROG,
+  SYS_INFO_PARAM_SYSFW_VER,
+  SYS_INFO_PARAM_SYS_NAME,
+  SYS_INFO_PARAM_PRI_OS_NAME,
+  SYS_INFO_PARAM_PRESENT_OS_NAME,
+  SYS_INFO_PARAM_PRESENT_OS_VER,
+  SYS_INFO_PARAM_BMC_URL,
+  SYS_INFO_PARAM_OS_HV_URL,
+};
+
+// TODO: Once data storage is finalized, the following structure needs
+// to be retrieved/updated from persistant backend storage
+static lan_config_t g_lan_config = { 0 };
+static proc_info_t g_proc_info = { 0 };
+static dimm_info_t g_dimm_info[MAX_NUM_DIMMS] = { 0 };
+
+// TODO: Need to store this info after identifying proper storage
+static sys_info_param_t g_sys_info_params;
+
+// TODO: Based on performance testing results, might need fine grained locks
+// Since the global data is specific to a NetFunction, adding locs at NetFn level
+static pthread_mutex_t m_chassis;
+static pthread_mutex_t m_app;
+static pthread_mutex_t m_storage;
+static pthread_mutex_t m_transport;
+static pthread_mutex_t m_oem;
+
+/*
+ * Function(s) to handle IPMI messages with NetFn: Chassis
+ */
+// Get Chassis Status (IPMI/Section 28.2)
+static void
+chassis_get_status (unsigned char *response, unsigned char *res_len)
+{
+  ipmi_res_t *res = (ipmi_res_t *) response;
+  unsigned char *data = &res->data[0];
+
+  res->cc = CC_SUCCESS;
+
+  // TODO: Need to obtain current power state and last power event
+  // from platform and return
+  *data++ = 0x01;		// Current Power State
+  *data++ = 0x00;		// Last Power Event
+  *data++ = 0x40;		// Misc. Chassis Status
+  *data++ = 0x00;		// Front Panel Button Disable
+
+  *res_len = data - &res->data[0];
+}
+
+// Get System Boot Options (IPMI/Section 28.12)
+static void
+chassis_get_boot_options (unsigned char *request, unsigned char *response,
+			  unsigned char *res_len)
+{
+  ipmi_req_t *req = (ipmi_req_t *) request;
+  ipmi_res_t *res= (ipmi_res_t *) response;
+  unsigned char *data = &res->data[0];
+  unsigned char param = req->data[0];
+
+  // Fill response with default values
+  res->cc = CC_SUCCESS;
+  *data++ = 0x01;		// Parameter Version
+  *data++ = req->data[0];	// Parameter
+
+  // TODO: Need to store user settings and return
+  switch (param)
+  {
+    case PARAM_SET_IN_PROG:
+      *data++ = 0x00;	// Set In Progress
+      break;
+    case PARAM_SVC_PART_SELECT:
+      *data++ = 0x00;	// Service Partition Selector
+      break;
+    case PARAM_SVC_PART_SCAN:
+      *data++ = 0x00;	// Service Partition Scan
+      break;
+    case PARAM_BOOT_FLAG_CLR:
+      *data++ = 0x00;	// BMC Boot Flag Valid Bit Clear
+      break;
+    case PARAM_BOOT_INFO_ACK:
+      *data++ = 0x00;	// Write Mask
+      *data++ = 0x00;	// Boot Initiator Ack Data
+      break;
+    case PARAM_BOOT_FLAGS:
+      *data++ = 0x00;	// Boot Flags
+      *data++ = 0x00;	// Boot Device Selector
+      *data++ = 0x00;	// Firmwaer Verbosity
+      *data++ = 0x00;	// BIOS Override
+      *data++ = 0x00;	// Device Instance Selector
+      break;
+    case PARAM_BOOT_INIT_INFO:
+      *data++ = 0x00;	// Chanel Number
+      *data++ = 0x00;	// Session ID (4 bytes)
+      *data++ = 0x00;
+      *data++ = 0x00;
+      *data++ = 0x00;
+      *data++ = 0x00;	// Boot Info Timestamp (4 bytes)
+      *data++ = 0x00;
+      *data++ = 0x00;
+      *data++ = 0x00;
+      break;
+    deault:
+      res->cc = CC_PARAM_OUT_OF_RANGE;
+      break;
+  }
+
+  if (res->cc == CC_SUCCESS) {
+    *res_len = data - &res->data[0];
+  }
+}
+
+// Handle Chassis Commands (IPMI/Section 28)
+static void
+ipmi_handle_chassis (unsigned char *request, unsigned char req_len,
+		     unsigned char *response, unsigned char *res_len)
+{
+  ipmi_req_t *req = (ipmi_req_t *) request;
+  ipmi_res_t *res = (ipmi_res_t *) response;
+  unsigned char cmd = req->cmd;
+
+  pthread_mutex_lock(&m_chassis);
+  switch (cmd)
+  {
+    case CMD_CHASSIS_GET_STATUS:
+      chassis_get_status (response, res_len);
+      break;
+    case CMD_CHASSIS_GET_BOOT_OPTIONS:
+      chassis_get_boot_options (request, response, res_len);
+      break;
+    default:
+      res->cc = CC_INVALID_CMD;
+      break;
+  }
+  pthread_mutex_unlock(&m_chassis);
+}
+
+/*
+ * Function(s) to handle IPMI messages with NetFn: Application
+ */
+// Get Device ID (IPMI/Section 20.1)
+static void
+app_get_device_id (unsigned char *response, unsigned char *res_len)
+{
+
+  ipmi_res_t *res = (ipmi_res_t *) response;
+  unsigned char *data = &res->data[0];
+
+  res->cc = CC_SUCCESS;
+
+  //TODO: Following data needs to be updated based on platform
+  *data++ = 0x20;		// Device ID
+  *data++ = 0x81;		// Device Revision
+  *data++ = 0x00;		// Firmware Revision Major
+  *data++ = 0x09;		// Firmware Revision Minor
+  *data++ = 0x02;		// IPMI Version
+  *data++ = 0xBF;		// Additional Device Support
+  *data++ = 0x15;		// Manufacturer ID1
+  *data++ = 0xA0;		// Manufacturer ID2
+  *data++ = 0x00;		// Manufacturer ID3
+  *data++ = 0x46;		// Product ID1
+  *data++ = 0x31;		// Product ID2
+  *data++ = 0x00;		// Aux. Firmware Version1
+  *data++ = 0x00;		// Aux. Firmware Version2
+  *data++ = 0x00;		// Aux. Firmware Version3
+  *data++ = 0x00;		// Aux. Firmware Version4
+
+  *res_len = data - &res->data[0];
+}
+
+// Get Self Test Results (IPMI/Section 20.4)
+static void
+app_get_selftest_results (unsigned char *response, unsigned char *res_len)
+{
+
+  ipmi_res_t *res = (ipmi_res_t *) response;
+  unsigned char *data = &res->data[0];
+
+  res->cc = CC_SUCCESS;
+
+  //TODO: Following data needs to be updated based on self-test results
+  *data++ = 0x55;		// Self-Test result
+  *data++ = 0x00;		// Extra error info in case of failure
+
+  *res_len = data - &res->data[0];
+}
+
+// Get Device GUID (IPMI/Section 20.8)
+static void
+app_get_device_guid (unsigned char *response, unsigned char *res_len)
+{
+  ipmi_res_t *res = (ipmi_res_t *) response;
+  unsigned char *data = &res->data[0];
+
+  res->cc = 0x00;
+
+  // TODO: Following data is Globaly Unique ID i.e. MAC Address..
+  *data++ = 0x0;
+  *data++ = 0x1;
+  *data++ = 0x2;
+  *data++ = 0x3;
+  *data++ = 0x4;
+  *data++ = 0x5;
+  *data++ = 0x6;
+  *data++ = 0x7;
+  *data++ = 0x8;
+  *data++ = 0x9;
+  *data++ = 0xa;
+  *data++ = 0xb;
+  *data++ = 0xc;
+  *data++ = 0xd;
+  *data++ = 0xe;
+  *data++ = 0xf;
+
+  *res_len = data - &res->data[0];
+}
+
+// Get BMC Global Enables (IPMI/Section 22.2)
+static void
+app_get_global_enables (unsigned char *response, unsigned char *res_len)
+{
+
+  ipmi_res_t *res = (ipmi_res_t *) response;
+  unsigned char *data = &res->data[0];
+
+  res->cc = CC_SUCCESS;
+
+  *data++ = 0x09;		// Global Enable
+
+  *res_len = data - &res->data[0];
+}
+
+// Set System Info Params (IPMI/Section 22.14a)
+static void
+app_set_sys_info_params (unsigned char *request, unsigned char *response,
+			 unsigned char *res_len)
+{
+
+  ipmi_req_t *req = (ipmi_req_t *) request;
+  ipmi_res_t *res = (ipmi_res_t *) response;
+  unsigned char param = req->data[0];
+
+  res->cc = CC_SUCCESS;
+
+  switch (param)
+  {
+    case SYS_INFO_PARAM_SET_IN_PROG:
+      g_sys_info_params.set_in_prog = req->data[1];
+      break;
+    case SYS_INFO_PARAM_SYSFW_VER:
+      memcpy(g_sys_info_params.sysfw_ver, &req->data[1], SIZE_SYSFW_VER);
+      break;
+    case SYS_INFO_PARAM_SYS_NAME:
+      memcpy(g_sys_info_params.sys_name, &req->data[1], SIZE_SYS_NAME);
+      break;
+    case SYS_INFO_PARAM_PRI_OS_NAME:
+      memcpy(g_sys_info_params.pri_os_name, &req->data[1], SIZE_OS_NAME);
+      break;
+    case SYS_INFO_PARAM_PRESENT_OS_NAME:
+      memcpy(g_sys_info_params.present_os_name, &req->data[1], SIZE_OS_NAME);
+      break;
+    case SYS_INFO_PARAM_PRESENT_OS_VER:
+      memcpy(g_sys_info_params.present_os_ver, &req->data[1], SIZE_OS_VER);
+      break;
+    case SYS_INFO_PARAM_BMC_URL:
+      memcpy(g_sys_info_params.bmc_url, &req->data[1], SIZE_BMC_URL);
+      break;
+    case SYS_INFO_PARAM_OS_HV_URL:
+      memcpy(g_sys_info_params.os_hv_url, &req->data[1], SIZE_OS_HV_URL);
+      break;
+    default:
+      res->cc = CC_INVALID_PARAM;
+      break;
+  }
+
+  return;
+}
+
+// Get System Info Params (IPMI/Section 22.14b)
+static void
+app_get_sys_info_params (unsigned char *request, unsigned char *response,
+			 unsigned char *res_len)
+{
+
+  ipmi_req_t *req = (ipmi_req_t *) request;
+  ipmi_res_t *res = (ipmi_res_t *) response;
+  unsigned char *data = &res->data[0];
+  unsigned char param = req->data[1];
+
+  // Fill default return values
+  res->cc = CC_SUCCESS;
+  *data++ = 1;		// Parameter revision
+
+  switch (param)
+  {
+    case SYS_INFO_PARAM_SET_IN_PROG:
+      *data++ = g_sys_info_params.set_in_prog;
+      break;
+    case SYS_INFO_PARAM_SYSFW_VER:
+      memcpy(data, g_sys_info_params.sysfw_ver, SIZE_SYSFW_VER);
+      data += SIZE_SYSFW_VER;
+      break;
+    case SYS_INFO_PARAM_SYS_NAME:
+      memcpy(data, g_sys_info_params.sys_name, SIZE_SYS_NAME);
+      data += SIZE_SYS_NAME;
+      break;
+    case SYS_INFO_PARAM_PRI_OS_NAME:
+      memcpy(data, g_sys_info_params.pri_os_name, SIZE_OS_NAME);
+      data += SIZE_OS_NAME;
+      break;
+    case SYS_INFO_PARAM_PRESENT_OS_NAME:
+      memcpy(data, g_sys_info_params.present_os_name, SIZE_OS_NAME);
+      data += SIZE_OS_NAME;
+      break;
+    case SYS_INFO_PARAM_PRESENT_OS_VER:
+      memcpy(data, g_sys_info_params.present_os_ver, SIZE_OS_VER);
+      data += SIZE_OS_VER;
+      break;
+    case SYS_INFO_PARAM_BMC_URL:
+      memcpy(data, g_sys_info_params.bmc_url, SIZE_BMC_URL);
+      data += SIZE_BMC_URL;
+      break;
+    case SYS_INFO_PARAM_OS_HV_URL:
+      memcpy(data, g_sys_info_params.os_hv_url, SIZE_OS_HV_URL);
+      data += SIZE_OS_HV_URL;
+      break;
+    default:
+      res->cc = CC_INVALID_PARAM;
+      break;
+  }
+
+  if (res->cc == CC_SUCCESS) {
+    *res_len = data - &res->data[0];
+  }
+
+  return;
+}
+
+// Handle Appliction Commands (IPMI/Section 20)
+static void
+ipmi_handle_app (unsigned char *request, unsigned char req_len,
+		 unsigned char *response, unsigned char *res_len)
+{
+  ipmi_req_t *req = (ipmi_req_t *) request;
+  ipmi_res_t *res = (ipmi_res_t *) response;
+  unsigned char cmd = req->cmd;
+
+  pthread_mutex_lock(&m_app);
+  switch (cmd)
+  {
+    case CMD_APP_GET_DEVICE_ID:
+      app_get_device_id (response, res_len);
+      break;
+    case CMD_APP_GET_SELFTEST_RESULTS:
+      app_get_selftest_results (response, res_len);
+      break;
+    case CMD_APP_GET_DEVICE_GUID:
+    case CMD_APP_GET_SYSTEM_GUID:
+      // Get Device GUID and Get System GUID returns same data
+      // from IPMI stack. FYI, Get System GUID will have to be
+      // sent with in an IPMI session that includes session info
+      app_get_device_guid (response, res_len);
+      break;
+    case CMD_APP_GET_GLOBAL_ENABLES:
+      app_get_global_enables (response, res_len);
+      break;
+    case CMD_APP_SET_SYS_INFO_PARAMS:
+      app_set_sys_info_params (request, response, res_len);
+      break;
+    case CMD_APP_GET_SYS_INFO_PARAMS:
+      app_get_sys_info_params (request, response, res_len);
+      break;
+    default:
+      res->cc = CC_INVALID_CMD;
+      break;
+  }
+  pthread_mutex_unlock(&m_app);
+}
+
+/*
+ * Function(s) to handle IPMI messages with NetFn: Storage
+ */
+
+static void
+storage_get_fruid_info(unsigned char *response, unsigned char *res_len)
+{
+  ipmi_res_t *res = (ipmi_res_t *) response;
+  unsigned char *data = &res->data[0];
+  int size = plat_fruid_size();
+
+  res->cc = CC_SUCCESS;
+
+  *data++ = size & 0xFF; // FRUID size LSB
+  *data++ = (size >> 8) & 0xFF; // FRUID size MSB
+  *data++ = 0x00; // Device accessed by bytes
+
+  *res_len = data - &res->data[0];
+
+  return;
+}
+
+static void
+storage_get_fruid_data(unsigned char *request, unsigned char *response,
+    unsigned char *res_len)
+{
+  ipmi_req_t *req = (ipmi_req_t *) request;
+  ipmi_res_t *res = (ipmi_res_t *) response;
+  unsigned char *data = &res->data[0];
+
+  int offset = req->data[1] + (req->data[2] << 8);
+  int count = req->data[3];
+
+  int ret = plat_fruid_data(offset, count, &(res->data[1]));
+  if (ret) {
+    res->cc = CC_UNSPECIFIED_ERROR;
+  } else {
+    res->cc = CC_SUCCESS;
+    *data++ = count;
+    data += count;
+  }
+
+  if (res->cc == CC_SUCCESS) {
+    *res_len = data - &res->data[0];
+  }
+  return;
+}
+
+static void
+storage_get_sdr_info (unsigned char *response, unsigned char *res_len)
+{
+  ipmi_res_t *res = (ipmi_res_t *) response;
+  unsigned char *data = &res->data[0];
+  int num_entries;		// number of sdr records
+  int free_space;		// free space in SDR device in bytes
+  time_stamp_t ts_recent_add;	// Recent Addition Timestamp
+  time_stamp_t ts_recent_erase;	// Recent Erasure Timestamp
+
+  // Use platform APIs to get SDR information
+  num_entries = plat_sdr_num_entries ();
+  free_space = plat_sdr_free_space ();
+  plat_sdr_ts_recent_add (&ts_recent_add);
+  plat_sdr_ts_recent_erase (&ts_recent_erase);
+
+  res->cc = CC_SUCCESS;
+
+  *data++ = IPMI_SDR_VERSION;	// SDR version
+  *data++ = num_entries & 0xFF;	// number of sdr entries
+  *data++ = (num_entries >> 8) & 0xFF;
+  *data++ = free_space & 0xFF;	// Free SDR Space
+  *data++ = (free_space >> 8) & 0xFF;
+
+  memcpy(data, ts_recent_add.ts, SIZE_TIME_STAMP);
+  data += SIZE_TIME_STAMP;
+
+  memcpy(data, ts_recent_erase.ts, SIZE_TIME_STAMP);
+  data += SIZE_TIME_STAMP;
+
+  *data++ = 0x02;		// Operations supported
+
+  *res_len = data - &res->data[0];
+
+  return;
+}
+
+static void
+storage_rsv_sdr (unsigned char *response, unsigned char *res_len)
+{
+  ipmi_res_t *res = (ipmi_res_t *) response;
+  unsigned char *data = &res->data[0];
+  int rsv_id;			// SDR reservation ID
+
+  // Use platform APIs to get a SDR reservation ID
+  rsv_id = plat_sdr_rsv_id ();
+  if (rsv_id < 0)
+  {
+      res->cc = CC_UNSPECIFIED_ERROR;
+      return;
+  }
+
+  res->cc = CC_SUCCESS;
+  *data++ = rsv_id & 0xFF;	// Reservation ID
+  *data++ = (rsv_id >> 8) & 0XFF;
+
+  *res_len = data - &res->data[0];
+
+  return;
+}
+
+static void
+storage_get_sdr (unsigned char *request, unsigned char *response,
+		 unsigned char *res_len)
+{
+  ipmi_req_t *req = (ipmi_req_t *) request;
+  ipmi_res_t *res = (ipmi_res_t *) response;
+  unsigned char *data = &res->data[0];
+
+  int read_rec_id;		//record ID to be read
+  int next_rec_id;		//record ID for the next entry
+  int rsv_id;			// Reservation ID for the request
+  int rec_offset;		// Read offset into the record
+  int rec_bytes;		// Number of bytes to be read
+  sdr_rec_t entry;		// SDR record entry
+  int ret;
+
+  rsv_id = (req->data[1] >> 8) | req->data[0];
+  read_rec_id = (req->data[3] >> 8) | req->data[2];
+  rec_offset = req->data[4];
+  rec_bytes = req->data[5];
+
+  // Use platform API to read the record Id and get next ID
+  ret = plat_sdr_get_entry (rsv_id, read_rec_id, &entry, &next_rec_id);
+  if (ret)
+  {
+      res->cc = CC_UNSPECIFIED_ERROR;
+      return;
+  }
+
+  res->cc = CC_SUCCESS;
+  *data++ = next_rec_id & 0xFF;	// next record ID
+  *data++ = (next_rec_id >> 8) & 0xFF;
+
+  memcpy (data, &entry.rec[rec_offset], rec_bytes);
+  data += rec_bytes;
+
+  *res_len = data - &res->data[0];
+
+  return;
+}
+
+static void
+storage_get_sel_info (unsigned char *response, unsigned char *res_len)
+{
+  ipmi_res_t *res = (ipmi_res_t *) response;
+  unsigned char *data = &res->data[0];
+  int num_entries;		// number of log entries
+  int free_space;		// free space in SEL device in bytes
+  time_stamp_t ts_recent_add;	// Recent Addition Timestamp
+  time_stamp_t ts_recent_erase;	// Recent Erasure Timestamp
+
+  // Use platform APIs to get SEL information
+  num_entries = plat_sel_num_entries ();
+  free_space = plat_sel_free_space ();
+  plat_sel_ts_recent_add (&ts_recent_add);
+  plat_sel_ts_recent_erase (&ts_recent_erase);
+
+  res->cc = CC_SUCCESS;
+
+  *data++ = IPMI_SEL_VERSION;	// SEL version
+  *data++ = num_entries & 0xFF;	// number of log entries
+  *data++ = (num_entries >> 8) & 0xFF;
+  *data++ = free_space & 0xFF;	// Free SEL Space
+  *data++ = (free_space >> 8) & 0xFF;
+
+  memcpy(data, ts_recent_add.ts, SIZE_TIME_STAMP);
+  data += SIZE_TIME_STAMP;
+
+  memcpy(data, ts_recent_erase.ts, SIZE_TIME_STAMP);
+  data += SIZE_TIME_STAMP;
+
+  *data++ = 0x02;		// Operations supported
+
+  *res_len = data - &res->data[0];
+
+  return;
+}
+
+static void
+storage_rsv_sel (unsigned char *response, unsigned char *res_len)
+{
+  ipmi_res_t *res = (ipmi_res_t *) response;
+  unsigned char *data = &res->data[0];
+  int rsv_id;			// SEL reservation ID
+
+  // Use platform APIs to get a SEL reservation ID
+  rsv_id = plat_sel_rsv_id ();
+  if (rsv_id < 0)
+  {
+      res->cc = CC_SEL_ERASE_PROG;
+      return;
+  }
+
+  res->cc = CC_SUCCESS;
+  *data++ = rsv_id & 0xFF;	// Reservation ID
+  *data++ = (rsv_id >> 8) & 0XFF;
+
+  *res_len = data - &res->data[0];
+
+  return;
+}
+
+static void
+storage_get_sel (unsigned char *request, unsigned char *response,
+		 unsigned char *res_len)
+{
+  ipmi_req_t *req = (ipmi_req_t *) request;
+  ipmi_res_t *res = (ipmi_res_t *) response;
+  unsigned char *data = &res->data[0];
+
+  int read_rec_id;		//record ID to be read
+  int next_rec_id;		//record ID for the next msg
+  sel_msg_t entry;		// SEL log entry
+  int ret;
+
+  read_rec_id = (req->data[3] >> 8) | req->data[2];
+
+  // Use platform API to read the record Id and get next ID
+  ret = plat_sel_get_entry (read_rec_id, &entry, &next_rec_id);
+  if (ret)
+  {
+    res->cc = CC_UNSPECIFIED_ERROR;
+    return;
+  }
+
+  res->cc = CC_SUCCESS;
+  *data++ = next_rec_id & 0xFF;	// next record ID
+  *data++ = (next_rec_id >> 8) & 0xFF;
+
+  memcpy(data, entry.msg, SIZE_SEL_REC);
+  data += SIZE_SEL_REC;
+
+  *res_len = data - &res->data[0];
+
+  return;
+}
+
+static void
+storage_add_sel (unsigned char *request, unsigned char *response,
+		 unsigned char *res_len)
+{
+  ipmi_req_t *req = (ipmi_req_t *) request;
+  ipmi_res_t *res = (ipmi_res_t *) response;
+  unsigned char *data = &res->data[0];
+
+
+  int record_id;		// Record ID for added entry
+  int ret;
+
+  sel_msg_t entry;
+
+  memcpy(entry.msg, req->data, SIZE_SEL_REC);
+
+  // Use platform APIs to add the new SEL entry
+  ret = plat_sel_add_entry (&entry, &record_id);
+  if (ret)
+  {
+    res->cc = CC_UNSPECIFIED_ERROR;
+    return;
+  }
+
+  res->cc = CC_SUCCESS;
+  *data++ = record_id & 0xFF;
+  *data++ = (record_id >> 8) & 0xFF;
+
+  *res_len = data - &res->data[0];
+
+  return;
+}
+
+static void
+storage_clr_sel (unsigned char *request, unsigned char *response,
+		 unsigned char *res_len)
+{
+  ipmi_req_t *req = (ipmi_req_t *) request;
+  ipmi_res_t *res = (ipmi_res_t *) response;
+  unsigned char *data = &res->data[0];
+
+  sel_erase_stat_t status;
+  int ret;
+  int rsv_id;
+
+  // Verify the request to contain 'CLR' characters
+  if ((req->data[2] != 'C') || (req->data[3] != 'L') || (req->data[4] != 'R'))
+  {
+    res->cc = CC_INVALID_PARAM;
+    return;
+  }
+
+  // Populate reservation ID given in request
+  rsv_id = (req->data[1] << 8) | req->data[0];
+
+  // Use platform APIs to clear or get status
+  if (req->data[5] == IPMI_SEL_INIT_ERASE)
+  {
+    ret = plat_sel_erase (rsv_id);
+  }
+  else if (req->data[5] == IPMI_SEL_ERASE_STAT)
+  {
+    ret = plat_sel_erase_status (rsv_id, &status);
+  }
+  else
+  {
+    res->cc = CC_INVALID_PARAM;
+    return;
+  }
+
+  // Handle platform error and return
+  if (ret)
+    {
+      res->cc = CC_UNSPECIFIED_ERROR;
+      return;
+    }
+
+  res->cc = CC_SUCCESS;
+  *data++ = status;
+
+  *res_len = data - &res->data[0];
+
+  return;
+}
+
+static void
+ipmi_handle_storage (unsigned char *request, unsigned char req_len,
+		     unsigned char *response, unsigned char *res_len)
+{
+  ipmi_req_t *req = (ipmi_req_t *) request;
+  ipmi_res_t *res = (ipmi_res_t *) response;
+  unsigned char cmd = req->cmd;
+
+  res->cc = CC_SUCCESS;
+  *res_len = 0;
+
+  pthread_mutex_lock(&m_storage);
+  switch (cmd)
+  {
+    case CMD_STORAGE_GET_FRUID_INFO:
+      storage_get_fruid_info (response, res_len);
+      break;
+    case CMD_STORAGE_READ_FRUID_DATA:
+      storage_get_fruid_data (request, response, res_len);
+      break;
+    case CMD_STORAGE_GET_SEL_INFO:
+      storage_get_sel_info (response, res_len);
+      break;
+    case CMD_STORAGE_RSV_SEL:
+      storage_rsv_sel (response, res_len);
+      break;
+    case CMD_STORAGE_ADD_SEL:
+      storage_add_sel (request, response, res_len);
+      break;
+    case CMD_STORAGE_GET_SEL:
+      storage_get_sel (request, response, res_len);
+      break;
+    case CMD_STORAGE_CLR_SEL:
+      storage_clr_sel (request, response, res_len);
+      break;
+    case CMD_STORAGE_GET_SDR_INFO:
+      storage_get_sdr_info (response, res_len);
+      break;
+    case CMD_STORAGE_RSV_SDR:
+      storage_rsv_sdr (response, res_len);
+      break;
+    case CMD_STORAGE_GET_SDR:
+      storage_get_sdr (request, response, res_len);
+      break;
+    default:
+      res->cc = CC_INVALID_CMD;
+      break;
+  }
+
+  pthread_mutex_unlock(&m_storage);
+  return;
+}
+
+/*
+ * Function(s) to handle IPMI messages with NetFn: Transport
+ */
+
+// Set LAN Configuration (IPMI/Section 23.1)
+static void
+transport_set_lan_config (unsigned char *request, unsigned char *response,
+			  unsigned char *res_len)
+{
+  ipmi_req_t *req = (ipmi_req_t *) request;
+  ipmi_res_t *res = (ipmi_res_t *) response;
+  unsigned char param = req->data[1];
+
+  // Fill the response with default values
+  res->cc = CC_SUCCESS;
+
+  switch (param)
+  {
+    case LAN_PARAM_SET_IN_PROG:
+      g_lan_config.set_in_prog = req->data[2];
+      break;
+    case LAN_PARAM_AUTH_SUPPORT:
+      g_lan_config.auth_support = req->data[2];
+      break;
+    case LAN_PARAM_AUTH_ENABLES:
+      memcpy(g_lan_config.auth_enables, &req->data[2], SIZE_AUTH_ENABLES);
+      break;
+    case LAN_PARAM_IP_ADDR:
+      memcpy(g_lan_config.ip_addr, &req->data[2], SIZE_IP_ADDR);
+      break;
+    case LAN_PARAM_IP_SRC:
+      g_lan_config.ip_src = req->data[2];
+      break;
+    case LAN_PARAM_MAC_ADDR:
+      memcpy(g_lan_config.mac_addr, &req->data[2], SIZE_MAC_ADDR);
+      break;
+    case LAN_PARAM_NET_MASK:
+      memcpy(g_lan_config.net_mask, &req->data[2], SIZE_NET_MASK);
+      break;
+    case LAN_PARAM_IP_HDR:
+      memcpy(g_lan_config.ip_hdr, &req->data[2], SIZE_IP_HDR);
+      break;
+    case LAN_PARAM_PRI_RMCP_PORT:
+      g_lan_config.pri_rmcp_port[0] = req->data[2];
+      g_lan_config.pri_rmcp_port[1] = req->data[3];
+      break;
+    case LAN_PARAM_SEC_RMCP_PORT:
+      g_lan_config.sec_rmcp_port[0] = req->data[2];
+      g_lan_config.sec_rmcp_port[1] = req->data[3];
+      break;
+    case LAN_PARAM_ARP_CTRL:
+      g_lan_config.arp_ctrl = req->data[2];
+      break;
+    case LAN_PARAM_GARP_INTERVAL:
+      g_lan_config.garp_interval = req->data[2];
+      break;
+    case LAN_PARAM_DF_GW_IP_ADDR:
+      memcpy(g_lan_config.df_gw_ip_addr, &req->data[2], SIZE_IP_ADDR);
+      break;
+    case LAN_PARAM_DF_GW_MAC_ADDR:
+      memcpy(g_lan_config.df_gw_mac_addr, &req->data[2], SIZE_MAC_ADDR);
+      break;
+    case LAN_PARAM_BACK_GW_IP_ADDR:
+      memcpy(g_lan_config.back_gw_ip_addr, &req->data[2], SIZE_IP_ADDR);
+      break;
+    case LAN_PARAM_BACK_GW_MAC_ADDR:
+      memcpy(g_lan_config.back_gw_mac_addr, &req->data[2], SIZE_MAC_ADDR);
+      break;
+    case LAN_PARAM_COMMUNITY_STR:
+      memcpy(g_lan_config.community_str, &req->data[2], SIZE_COMMUNITY_STR);
+      break;
+    case LAN_PARAM_NO_OF_DEST:
+      g_lan_config.no_of_dest = req->data[2];
+      break;
+    case LAN_PARAM_DEST_TYPE:
+      memcpy(g_lan_config.dest_type, &req->data[2], SIZE_DEST_TYPE);
+      break;
+    case LAN_PARAM_DEST_ADDR:
+      memcpy(g_lan_config.dest_addr, &req->data[2], SIZE_DEST_ADDR);
+      break;
+    default:
+      res->cc = CC_INVALID_PARAM;
+      break;
+  }
+}
+
+// Get LAN Configuration (IPMI/Section 23.2)
+static void
+transport_get_lan_config (unsigned char *request, unsigned char *response,
+			  unsigned char *res_len)
+{
+
+  ipmi_req_t *req = (ipmi_req_t *) request;
+  ipmi_res_t *res = (ipmi_res_t *) response;
+  unsigned char *data = &res->data[0];
+  unsigned char param = req->data[1];
+
+  // Fill the response with default values
+  res->cc = CC_SUCCESS;
+  *data++ = 0x01;		// Parameter revision
+
+  switch (param)
+  {
+    case LAN_PARAM_SET_IN_PROG:
+      *data++ = g_lan_config.set_in_prog;
+      break;
+    case LAN_PARAM_AUTH_SUPPORT:
+      *data++ = g_lan_config.auth_support;
+      break;
+    case LAN_PARAM_AUTH_ENABLES:
+      memcpy(data, g_lan_config.auth_enables, SIZE_AUTH_ENABLES);
+      data += SIZE_AUTH_ENABLES;
+      break;
+    case LAN_PARAM_IP_ADDR:
+      memcpy(data, g_lan_config.ip_addr, SIZE_IP_ADDR);
+      data += SIZE_IP_ADDR;
+      break;
+    case LAN_PARAM_IP_SRC:
+      *data++ = g_lan_config.ip_src;
+      break;
+    case LAN_PARAM_MAC_ADDR:
+      memcpy(data, g_lan_config.mac_addr, SIZE_MAC_ADDR);
+      data += SIZE_MAC_ADDR;
+      break;
+    case LAN_PARAM_NET_MASK:
+      memcpy(data, g_lan_config.net_mask, SIZE_NET_MASK);
+      data += SIZE_NET_MASK;
+      break;
+    case LAN_PARAM_IP_HDR:
+      memcpy(data, g_lan_config.ip_hdr, SIZE_IP_HDR);
+      data += SIZE_IP_HDR;
+      break;
+    case LAN_PARAM_PRI_RMCP_PORT:
+      *data++ = g_lan_config.pri_rmcp_port[0];
+      *data++ = g_lan_config.pri_rmcp_port[1];
+      break;
+    case LAN_PARAM_SEC_RMCP_PORT:
+      *data++ = g_lan_config.sec_rmcp_port[0];
+      *data++ = g_lan_config.sec_rmcp_port[1];
+      break;
+    case LAN_PARAM_ARP_CTRL:
+      *data++ = g_lan_config.arp_ctrl;
+      break;
+    case LAN_PARAM_GARP_INTERVAL:
+      *data++ = g_lan_config.garp_interval;
+      break;
+    case LAN_PARAM_DF_GW_IP_ADDR:
+      memcpy(data, g_lan_config.df_gw_ip_addr, SIZE_IP_ADDR);
+      data += SIZE_IP_ADDR;
+      break;
+    case LAN_PARAM_DF_GW_MAC_ADDR:
+      memcpy(data, g_lan_config.df_gw_mac_addr, SIZE_MAC_ADDR);
+      data += SIZE_MAC_ADDR;
+      break;
+    case LAN_PARAM_BACK_GW_IP_ADDR:
+      memcpy(data, g_lan_config.back_gw_ip_addr, SIZE_IP_ADDR);
+      data += SIZE_IP_ADDR;
+      break;
+    case LAN_PARAM_BACK_GW_MAC_ADDR:
+      memcpy(data, g_lan_config.back_gw_mac_addr, SIZE_MAC_ADDR);
+      data += SIZE_MAC_ADDR;
+      break;
+    case LAN_PARAM_COMMUNITY_STR:
+      memcpy(data, g_lan_config.community_str, SIZE_COMMUNITY_STR);
+      data += SIZE_COMMUNITY_STR;
+      break;
+    case LAN_PARAM_NO_OF_DEST:
+      *data++ = g_lan_config.no_of_dest;
+      break;
+    case LAN_PARAM_DEST_TYPE:
+      memcpy(data, g_lan_config.dest_type, SIZE_DEST_TYPE);
+      data += SIZE_DEST_TYPE;
+      break;
+    case LAN_PARAM_DEST_ADDR:
+      memcpy(data, g_lan_config.dest_addr, SIZE_DEST_ADDR);
+      data += SIZE_DEST_ADDR;
+      break;
+    default:
+      res->cc = CC_INVALID_PARAM;
+      break;
+  }
+
+  if (res->cc == CC_SUCCESS) {
+    *res_len = data - &res->data[0];
+  }
+}
+
+// Handle Transport Commands (IPMI/Section 23)
+static void
+ipmi_handle_transport (unsigned char *request, unsigned char req_len,
+		       unsigned char *response, unsigned char *res_len)
+{
+  ipmi_req_t *req = (ipmi_req_t *) request;
+  ipmi_res_t *res = (ipmi_res_t *) response;
+  unsigned char cmd = req->cmd;
+
+  pthread_mutex_lock(&m_transport);
+  switch (cmd)
+  {
+    case CMD_TRANSPORT_SET_LAN_CONFIG:
+      transport_set_lan_config (request, response, res_len);
+      break;
+    case CMD_TRANSPORT_GET_LAN_CONFIG:
+      transport_get_lan_config (request, response, res_len);
+      break;
+    default:
+      res->cc = CC_INVALID_CMD;
+      break;
+  }
+  pthread_mutex_unlock(&m_transport);
+}
+
+/*
+ * Function(s) to handle IPMI messages with NetFn: OEM
+ */
+
+static void
+oem_set_proc_info (unsigned char *request, unsigned char *response,
+		   unsigned char *res_len)
+{
+  ipmi_req_t *req = (ipmi_req_t *) request;
+  ipmi_res_t *res = (ipmi_res_t *) response;
+
+  g_proc_info.type = req->data[1];
+  g_proc_info.freq[0] = req->data[2];
+  g_proc_info.freq[1] = req->data[3];
+
+  res->cc = CC_SUCCESS;
+  *res_len = 0;
+}
+
+static void
+oem_set_dimm_info (unsigned char *request, unsigned char *response,
+		   unsigned char *res_len)
+{
+  ipmi_req_t *req = (ipmi_req_t *) request;
+  ipmi_res_t *res = (ipmi_res_t *) response;
+
+  unsigned char index = req->data[0];
+
+  g_dimm_info[index].type = req->data[1];
+  g_dimm_info[index].speed[0] = req->data[2];
+  g_dimm_info[index].speed[1] = req->data[3];
+  g_dimm_info[index].size[0] = req->data[4];
+  g_dimm_info[index].size[1] = req->data[5];
+
+  res->cc = CC_SUCCESS;
+  *res_len = 0;
+}
+
+static void
+oem_set_post_start (unsigned char *response, unsigned char *res_len)
+{
+
+  ipmi_res_t *res = (ipmi_res_t *) response;
+
+  // TODO: For now logging the event, need to find usage for this info
+  syslog (LOG_INFO, "POST Start Event\n");
+
+  res->cc = CC_SUCCESS;
+  *res_len = 0;
+}
+
+static void
+oem_set_post_end (unsigned char *response, unsigned char *res_len)
+{
+
+  ipmi_res_t *res = (ipmi_res_t *) response;
+
+  // TODO: For now logging the event, need to find usage for this info
+  syslog (LOG_INFO, "POST End Event\n");
+
+  res->cc = CC_SUCCESS;
+  *res_len = 0;
+}
+
+static void
+ipmi_handle_oem (unsigned char *request, unsigned char req_len,
+		 unsigned char *response, unsigned char *res_len)
+{
+
+  ipmi_req_t *req = (ipmi_req_t *) request;
+  ipmi_res_t *res = (ipmi_res_t *) response;
+
+  unsigned char cmd = req->cmd;
+
+  pthread_mutex_lock(&m_oem);
+  switch (cmd)
+  {
+    case CMD_OEM_SET_PROC_INFO:
+      oem_set_proc_info (request, response, res_len);
+      break;
+    case CMD_OEM_SET_DIMM_INFO:
+      oem_set_dimm_info (request, response, res_len);
+      break;
+    case CMD_OEM_SET_POST_START:
+      oem_set_post_start (response, res_len);
+      break;
+    case CMD_OEM_SET_POST_END:
+      oem_set_post_end (response, res_len);
+      break;
+    default:
+      res->cc = CC_INVALID_CMD;
+      break;
+  }
+  pthread_mutex_unlock(&m_oem);
+}
+
+/*
+ * Function to handle all IPMI messages
+ */
+static void
+ipmi_handle (unsigned char *request, unsigned char req_len,
+	     unsigned char *response, unsigned char *res_len)
+{
+
+  ipmi_req_t *req = (ipmi_req_t *) request;
+  ipmi_res_t *res = (ipmi_res_t *) response;
+  unsigned char netfn;
+
+  netfn = req->netfn_lun >> 2;
+
+  // Provide default values in the response message
+  res->cmd = req->cmd;
+  res->cc = 0xFF;		// Unspecified completion code
+  *res_len = 0;
+
+  switch (netfn)
+  {
+    case NETFN_CHASSIS_REQ:
+      res->netfn_lun = NETFN_CHASSIS_RES << 2;
+      ipmi_handle_chassis (request, req_len, response, res_len);
+      break;
+    case NETFN_APP_REQ:
+      res->netfn_lun = NETFN_APP_RES << 2;
+      ipmi_handle_app (request, req_len, response, res_len);
+      break;
+    case NETFN_STORAGE_REQ:
+      res->netfn_lun = NETFN_STORAGE_RES << 2;
+      ipmi_handle_storage (request, req_len, response, res_len);
+      break;
+    case NETFN_TRANSPORT_REQ:
+      res->netfn_lun = NETFN_TRANSPORT_RES << 2;
+      ipmi_handle_transport (request, req_len, response, res_len);
+      break;
+    case NETFN_OEM_REQ:
+      res->netfn_lun = NETFN_OEM_RES << 2;
+      ipmi_handle_oem (request, req_len, response, res_len);
+      break;
+    default:
+      res->netfn_lun = (netfn + 1) << 2;
+      break;
+  }
+
+  // This header includes NetFunction, Command, and Completion Code
+  *res_len += SIZE_IPMI_RES_HDR;
+
+  return;
+}
+
+void
+*conn_handler(void *socket_desc) {
+  int sock = *(int*)socket_desc;
+  int n;
+  unsigned char req_buf[MAX_IPMI_MSG_SIZE];
+  unsigned char res_buf[MAX_IPMI_MSG_SIZE];
+  unsigned char res_len = 0;
+
+  n = recv (sock, req_buf, sizeof(req_buf), 0);
+  if (n <= 0) {
+      syslog(LOG_ALERT, "ipmid: recv() failed with %d\n", n);
+      goto conn_cleanup;
+  }
+
+  ipmi_handle(req_buf, n, res_buf, &res_len);
+
+  if (send (sock, res_buf, res_len, 0) < 0) {
+    syslog(LOG_ALERT, "ipmid: send() failed\n");
+  }
+
+conn_cleanup:
+  close(sock);
+
+  pthread_exit(NULL);
+  return 0;
+}
+
+
+int
+main (void)
+{
+  int s, s2, t, len;
+  struct sockaddr_un local, remote;
+  pthread_t tid;
+
+  daemon(1, 0);
+  openlog("ipmid", LOG_CONS, LOG_DAEMON);
+
+  plat_sel_init();
+  plat_sensor_init();
+  plat_sdr_init();
+  plat_fruid_init();
+
+  pthread_mutex_init(&m_chassis, NULL);
+  pthread_mutex_init(&m_app, NULL);
+  pthread_mutex_init(&m_storage, NULL);
+  pthread_mutex_init(&m_transport, NULL);
+  pthread_mutex_init(&m_oem, NULL);
+
+  if ((s = socket (AF_UNIX, SOCK_STREAM, 0)) == -1)
+  {
+    syslog(LOG_ALERT, "ipmid: socket() failed\n");
+    exit (1);
+  }
+
+  local.sun_family = AF_UNIX;
+  strcpy (local.sun_path, SOCK_PATH);
+  unlink (local.sun_path);
+  len = strlen (local.sun_path) + sizeof (local.sun_family);
+  if (bind (s, (struct sockaddr *) &local, len) == -1)
+  {
+    syslog(LOG_ALERT, "ipmid: bind() failed\n");
+    exit (1);
+  }
+
+  if (listen (s, 5) == -1)
+  {
+    syslog(LOG_ALERT, "ipmid: listen() failed\n");
+    exit (1);
+  }
+
+  while(1) {
+    int n;
+    t = sizeof (remote);
+    if ((s2 = accept (s, (struct sockaddr *) &remote, &t)) < 0) {
+      syslog(LOG_ALERT, "ipmid: accept() failed\n");
+      break;
+    }
+
+    // Creating a worker thread to handle the request
+    // TODO: Need to monitor the server performance with higher load and
+    // see if we need to create pre-defined number of workers and schedule
+    // the requests among them.
+    if (pthread_create(&tid, NULL, conn_handler, (void*) &s2) < 0) {
+        syslog(LOG_ALERT, "ipmid: pthread_create failed\n");
+        close(s2);
+        continue;
+    }
+
+    pthread_detach(tid);
+  }
+
+  close(s);
+
+  pthread_mutex_destroy(&m_chassis);
+  pthread_mutex_destroy(&m_app);
+  pthread_mutex_destroy(&m_storage);
+  pthread_mutex_destroy(&m_transport);
+  pthread_mutex_destroy(&m_oem);
+
+  return 0;
+}
diff --git a/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/fruid.h b/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/fruid.h
new file mode 100644
index 0000000..3580b08
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/fruid.h
@@ -0,0 +1,28 @@
+/*
+ *
+ * Copyright 2015-present Facebook. All Rights Reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __FRUID_H__
+#define __FRUID_H__
+
+int plat_fruid_size(void);
+int plat_fruid_data(int offset, int count, unsigned char *data);
+int plat_fruid_init(void);
+
+#endif /* __FRUID_H__ */
diff --git a/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/sdr.c b/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/sdr.c
new file mode 100644
index 0000000..e0a2f9a
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/sdr.c
@@ -0,0 +1,412 @@
+/*
+ *
+ * Copyright 2014-present Facebook. All Rights Reserved.
+ *
+ * This file represents platform specific implementation for storing
+ * SDR record entries and acts as back-end for IPMI stack
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include "sdr.h"
+#include "sensor.h"
+#include "timestamp.h"
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <errno.h>
+#include <syslog.h>
+#include <string.h>
+
+// SDR Header magic number
+#define SDR_HDR_MAGIC 0xFBFBFBFB
+
+// SDR Header version number
+#define SDR_HDR_VERSION 0x01
+
+// SDR reservation IDs can not be 0x00 or 0xFFFF
+#define SDR_RSVID_MIN  0x01
+#define SDR_RSVID_MAX  0xFFFE
+
+#define SDR_RECORDS_MAX 64 // to support around 64 sensors
+
+// SDR index to keep track
+#define SDR_INDEX_MIN 0
+#define SDR_INDEX_MAX (SDR_RECORDS_MAX - 1)
+
+// Record ID can not be 0x0 (IPMI/Section 31)
+#define SDR_RECID_MIN 1
+#define SDR_RECID_MAX SDR_RECORDS_MAX
+
+// Special RecID value for first and last (IPMI/Section 31)
+#define SDR_RECID_FIRST 0x0000
+#define SDR_RECID_LAST 0xFFFF
+
+#define SDR_VERSION 0x51
+#define SDR_LEN_MAX 64
+
+#define SDR_FULL_TYPE 0x01
+#define SDR_MGMT_TYPE 0x12
+#define SDR_OEM_TYPE 0xC0
+
+#define SDR_FULL_LEN 64
+#define SDR_MGMT_LEN 32
+#define SDR_OEM_LEN 64
+
+// SDR header struct to keep track of SEL Log entries
+typedef struct {
+  int magic; // Magic number to check validity
+  int version; // version number of this header
+  int begin; // index to the first SDR entry
+  int end; // index to the last SDR entry
+  time_stamp_t ts_add; // last addition time stamp
+  time_stamp_t ts_erase; // last erase time stamp
+} sdr_hdr_t;
+
+// Keep track of last Reservation ID
+static int g_rsv_id = 0x01;
+
+// SDR Header and data global structures
+static sdr_hdr_t g_sdr_hdr;
+static sdr_rec_t g_sdr_data[SDR_RECORDS_MAX];
+
+// Add a new SDR entry
+static int
+plat_sdr_add_entry(sdr_rec_t *rec, int *rec_id) {
+  // If SDR is full, return error
+  if (plat_sdr_num_entries() == SDR_RECORDS_MAX) {
+      syslog(LOG_ALERT, "plat_sdr_add_entry: SDR full\n");
+      return -1;
+  }
+
+  // Add Record ID which is array index + 1
+  rec->rec[0] = g_sdr_hdr.end+1;
+
+  // Add the enry at end
+  memcpy(g_sdr_data[g_sdr_hdr.end].rec, rec->rec, sizeof(sdr_rec_t));
+
+  // Return the newly added record ID
+  *rec_id = g_sdr_hdr.end+1;
+
+  // Increment the end pointer
+  ++g_sdr_hdr.end;
+
+  // Update timestamp for add in header
+  time_stamp_fill(g_sdr_hdr.ts_add.ts);
+
+  return 0;
+}
+
+static int
+sdr_add_mgmt_rec(sensor_mgmt_t *p_rec) {
+  int rec_id = 0;
+  sdr_rec_t sdr = { 0 };
+  sdr_mgmt_t rec = { 0 };
+
+  // Populate SDR MGMT record
+  rec.ver = SDR_VERSION;
+  rec.type = SDR_MGMT_TYPE;
+  rec.len = SDR_MGMT_LEN;
+
+  rec.slave_addr = p_rec->slave_addr;
+  rec.chan_no = p_rec->chan_no;
+
+  rec.pwr_state_init = p_rec->pwr_state_init;
+  rec.dev_caps = p_rec->dev_caps;
+  rec.ent_id = p_rec->ent_id;
+  rec.ent_inst = p_rec->ent_inst;
+  rec.oem = p_rec->oem;
+  rec.str_type_len = p_rec->str_type_len;
+  memcpy(rec.str, p_rec->str, SENSOR_STR_SIZE);
+
+  // Copy this record to generic SDR record
+  memcpy(sdr.rec, &rec, SDR_LEN_MAX);
+
+  // Add this record to SDR repo
+  if (plat_sdr_add_entry(&sdr, &rec_id)) {
+    syslog(LOG_ALERT, "sdr_add_mgmt_rec: plat_sdr_add_entry failed\n");
+    return -1;
+  }
+
+  return 0;
+}
+
+static int
+sdr_add_disc_rec(sensor_disc_t *p_rec) {
+  int rec_id = 0;
+  sdr_rec_t sdr = { 0 };
+  sdr_full_t rec = { 0 };
+
+  // Populate SDR FULL record
+  rec.ver = SDR_VERSION;
+  rec.type = SDR_FULL_TYPE;
+  rec.len = SDR_FULL_LEN;
+
+  rec.owner = p_rec->owner;
+  rec.lun = p_rec->lun;
+
+  rec.ent_id = p_rec->ent_id;
+  rec.ent_inst = p_rec->ent_inst;
+  rec.sensor_init = p_rec->sensor_init;
+  rec.sensor_caps = p_rec->sensor_caps;
+  rec.sensor_type = p_rec->sensor_type;
+  rec.evt_read_type = p_rec->evt_read_type;
+  memcpy(rec.assert_evt_mask, p_rec->assert_evt_mask, 2);
+  memcpy(rec.deassert_evt_mask, p_rec->deassert_evt_mask, 2);
+  memcpy(rec.read_evt_mask, p_rec->read_evt_mask, 2);
+  rec.oem = p_rec->oem;
+  rec.str_type_len = p_rec->str_type_len;
+  memcpy(rec.str, p_rec->str, SENSOR_STR_SIZE);
+
+  // Copy this record to generic SDR record
+  memcpy(sdr.rec, &rec, SDR_LEN_MAX);
+
+  // Add this record to SDR repo
+  if (plat_sdr_add_entry(&sdr, &rec_id)) {
+    syslog(LOG_ALERT, "sdr_add_disc_rec: plat_sdr_add_entry failed\n");
+    return -1;
+  }
+
+  return 0;
+}
+
+static int
+sdr_add_thresh_rec(sensor_thresh_t *p_rec) {
+  int rec_id = 0;
+  sdr_rec_t sdr = { 0 };
+  sdr_full_t rec = { 0 };
+
+  // Populate SDR FULL record
+  rec.ver = SDR_VERSION;
+  rec.type = SDR_FULL_TYPE;
+  rec.len = SDR_FULL_LEN;
+
+  rec.owner = p_rec->owner;
+  rec.lun = p_rec->lun;
+
+  rec.ent_id = p_rec->ent_id;
+  rec.ent_inst = p_rec->ent_inst;
+  rec.sensor_init = p_rec->sensor_init;
+  rec.sensor_caps = p_rec->sensor_caps;
+  rec.sensor_type = p_rec->sensor_type;
+  rec.evt_read_type = p_rec->evt_read_type;
+  memcpy(rec.lt_read_mask, p_rec->lt_read_mask, 2);
+  memcpy(rec.ut_read_mask, p_rec->ut_read_mask, 2);
+  memcpy(rec.set_thresh_mask, p_rec->set_thresh_mask, 2);
+  rec.sensor_units1 = p_rec->sensor_units1;
+  rec.sensor_units2 = p_rec->sensor_units2;
+  rec.sensor_units3 = p_rec->sensor_units3;
+  rec.linear = p_rec->linear;
+  rec.m_val = p_rec->m_val;
+  rec.m_tolerance = p_rec->m_tolerance;
+  rec.b_val = p_rec->b_val;
+  rec.b_accuracy = p_rec->b_accuracy;
+  rec.analog_flags = p_rec->analog_flags;
+  rec.nominal = p_rec->nominal;
+  rec.normal_max = p_rec->normal_max;
+  rec.normal_min = p_rec->normal_min;
+  rec.max_reading = p_rec->max_reading;
+  rec.min_reading = p_rec->min_reading;
+  rec.unr_thresh = p_rec->unr_thresh;
+  rec.uc_thresh = p_rec->uc_thresh;
+  rec.unc_thresh = p_rec->unc_thresh;
+  rec.lnr_thresh = p_rec->lnr_thresh;
+  rec.lc_thresh = p_rec->lc_thresh;
+  rec.lnc_thresh = p_rec->lnc_thresh;
+  rec.pos_hyst = p_rec->pos_hyst;
+  rec.neg_hyst = p_rec->neg_hyst;
+  rec.oem = p_rec->oem;
+  rec.str_type_len = p_rec->str_type_len;
+  memcpy(rec.str, p_rec->str, SENSOR_STR_SIZE);
+
+  // Copy this record to generic SDR record
+  memcpy(sdr.rec, &rec, SDR_LEN_MAX);
+
+  // Add this record to SDR repo
+  if (plat_sdr_add_entry(&sdr, &rec_id)) {
+    syslog(LOG_ALERT, "sdr_add_thresh_rec: plat_sdr_add_entry failed\n");
+    return -1;
+  }
+
+  return 0;
+}
+
+static int
+sdr_add_oem_rec(sensor_oem_t *p_rec) {
+  int rec_id = 0;
+  sdr_rec_t sdr = { 0 };
+  sdr_oem_t rec = { 0 };
+
+  // Populate SDR OEM record
+  rec.ver = SDR_VERSION;
+  rec.type = SDR_OEM_TYPE;
+  rec.len = SDR_OEM_LEN;
+
+  memcpy(rec.mfr_id, p_rec->mfr_id, 3);
+  memcpy(rec.oem_data, p_rec->oem_data, SENSOR_OEM_DATA_SIZE);
+
+  // Copy this record to generic SDR record
+  memcpy(sdr.rec, &rec, SDR_LEN_MAX);
+
+  // Add this record to SDR repo
+  if (plat_sdr_add_entry(&sdr, &rec_id)) {
+    syslog(LOG_ALERT, "sdr_add_oem_rec: plat_sdr_add_entry failed\n");
+    return -1;
+  }
+
+  return 0;
+}
+
+// Platform specific SEL API entry points
+// Retrieve time stamp for recent add operation
+void
+plat_sdr_ts_recent_add(time_stamp_t *ts) {
+  memcpy(ts->ts, g_sdr_hdr.ts_add.ts, 0x04);
+}
+
+// Retrieve time stamp for recent erase operation
+void
+plat_sdr_ts_recent_erase(time_stamp_t *ts) {
+  memcpy(ts->ts, g_sdr_hdr.ts_erase.ts, 0x04);
+}
+
+// Retrieve total number of entries in SDR repo
+int
+plat_sdr_num_entries(void) {
+    return (g_sdr_hdr.end - g_sdr_hdr.begin);
+}
+
+// Retrieve total free space available in SDR repo
+int
+plat_sdr_free_space(void) {
+  int total_space;
+  int used_space;
+
+  total_space = SDR_RECORDS_MAX * sizeof(sdr_rec_t);
+  used_space = plat_sdr_num_entries() * sizeof(sdr_rec_t);
+
+  return (total_space - used_space);
+}
+
+// Reserve an ID that will be used in later operations
+// IPMI/Section 33.11
+int
+plat_sdr_rsv_id() {
+  // Increment the current reservation ID and return
+  if (g_rsv_id++ == SDR_RSVID_MAX) {
+    g_rsv_id = SDR_RSVID_MIN;
+  }
+
+  return g_rsv_id;
+}
+
+// Get the SDR entry for a given record ID
+// IPMI/Section 33.12
+int
+plat_sdr_get_entry(int rsv_id, int read_rec_id, sdr_rec_t *rec,
+                   int *next_rec_id) {
+
+  int index;
+
+  // Make sure the rsv_id matches
+  if (rsv_id != g_rsv_id) {
+    syslog(LOG_ALERT, "plat_sdr_get_entry: Reservation ID mismatch\n");
+    return -1;
+  }
+
+  // Find the index in to array based on given index
+  if (read_rec_id == SDR_RECID_FIRST) {
+    index = g_sdr_hdr.begin;
+  } else if (read_rec_id == SDR_RECID_LAST) {
+    index = g_sdr_hdr.end - 1;
+  } else {
+    index = read_rec_id - 1;
+  }
+
+  // If the SDR repo is empty return error
+  if (plat_sdr_num_entries() == 0) {
+    syslog(LOG_ALERT, "plat_sdr_get_entry: No entries\n");
+    return -1;
+  }
+
+  // Check for boundary conditions
+  if ((index < SDR_INDEX_MIN) || (index > SDR_INDEX_MAX)) {
+    syslog(LOG_ALERT, "plat_sdr_get_entry: Invalid Record ID %d\n", read_rec_id);
+    return -1;
+  }
+
+  // Check to make sure the given id is valid
+  if (index < g_sdr_hdr.begin || index >= g_sdr_hdr.end) {
+    syslog(LOG_ALERT, "plat_sdr_get_entry: Wrong Record ID %d\n", read_rec_id);
+    return -1;
+  }
+
+  memcpy(rec->rec, g_sdr_data[index].rec, sizeof(sdr_rec_t));
+
+  // Return the next record ID in the log
+  *next_rec_id = ++read_rec_id;
+
+  // If this is the last entry in the log, return 0xFFFF
+  if (*next_rec_id == g_sdr_hdr.end) {
+    *next_rec_id = SDR_RECID_LAST;
+  }
+
+  return 0;
+}
+
+
+// Initialize SDR Repo structure
+int
+plat_sdr_init(void) {
+  int num;
+  sensor_mgmt_t *p_mgmt;
+  sensor_thresh_t *p_thresh;
+  sensor_disc_t *p_disc;
+  sensor_oem_t *p_oem;
+
+  // Populate SDR Header
+  g_sdr_hdr.magic = SDR_HDR_MAGIC;
+  g_sdr_hdr.version = SDR_HDR_VERSION;
+  g_sdr_hdr.begin = SDR_INDEX_MIN;
+  g_sdr_hdr.end = SDR_INDEX_MIN;
+  memset(g_sdr_hdr.ts_add.ts, 0x0, 4);
+  memset(g_sdr_hdr.ts_erase.ts, 0x0, 4);
+
+  // Populate all mgmt control sensors
+  plat_sensor_mgmt_info(&num, &p_mgmt);
+  for (int i = 0; i < num; i++) {
+    sdr_add_mgmt_rec(&p_mgmt[i]);
+  }
+
+  // Populate all discrete sensors
+  plat_sensor_disc_info(&num, &p_disc);
+  for (int i = 0; i < num; i++) {
+    sdr_add_disc_rec(&p_disc[i]);
+  }
+
+  // Populate all threshold sensors
+  plat_sensor_thresh_info(&num, &p_thresh);
+  for (int i = 0; i < num; i++) {
+    sdr_add_thresh_rec(&p_thresh[i]);
+  }
+
+  // Populate all OEM sensors
+  plat_sensor_oem_info(&num, &p_oem);
+  for (int i = 0; i < num; i++) {
+    sdr_add_oem_rec(&p_oem[i]);
+  }
+
+  return 0;
+}
diff --git a/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/sdr.h b/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/sdr.h
new file mode 100644
index 0000000..5e2a591
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/sdr.h
@@ -0,0 +1,132 @@
+/*
+ *
+ * Copyright 2014-present Facebook. All Rights Reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __SDR_H__
+#define __SDR_H__
+
+#include "timestamp.h"
+
+typedef struct {
+  unsigned char rec[64];
+} sdr_rec_t;
+
+// Full Sensor SDR record; IPMI/Section 43.1
+typedef struct {
+  // Sensor Record Header
+  unsigned char rec_id[2];
+  unsigned char ver;
+  unsigned char type;
+  unsigned char len;
+  // Record Key Bytes
+  unsigned char owner;
+  unsigned char lun;
+  unsigned char sensor_num;
+  // Record Body Bytes
+  unsigned char ent_id;
+  unsigned char ent_inst;
+  unsigned char sensor_init;
+  unsigned char sensor_caps;
+  unsigned char sensor_type;
+  unsigned char evt_read_type;
+  union {
+    unsigned char assert_evt_mask[2];
+    unsigned char lt_read_mask[2];
+  };
+  union {
+    unsigned char deassert_evt_mask[2];
+    unsigned char ut_read_mask[2];
+  };
+  union {
+    unsigned char read_evt_mask[2];
+    unsigned char set_thresh_mask[2];
+  };
+  unsigned char sensor_units1;
+  unsigned char sensor_units2;
+  unsigned char sensor_units3;
+  unsigned char linear;
+  unsigned char m_val;
+  unsigned char m_tolerance;
+  unsigned char b_val;
+  unsigned char b_accuracy;
+  unsigned char accuracy_dir;
+  unsigned char rb_exp;
+  unsigned char analog_flags;
+  unsigned char nominal;
+  unsigned char normal_max;
+  unsigned char normal_min;
+  unsigned char max_reading;
+  unsigned char min_reading;
+  unsigned char unr_thresh;
+  unsigned char uc_thresh;
+  unsigned char unc_thresh;
+  unsigned char lnr_thresh;
+  unsigned char lc_thresh;
+  unsigned char lnc_thresh;
+  unsigned char pos_hyst;
+  unsigned char neg_hyst;
+  unsigned char rsvd[2];
+  unsigned char oem;
+  unsigned char str_type_len;
+  char str[16];
+} sdr_full_t;
+
+// Mgmt. Controller SDR record; IPMI/ Section 43.9
+typedef struct {
+  // Sensor Record Header
+  unsigned char rec_id[2];
+  unsigned char ver;
+  unsigned char type;
+  unsigned char len;
+  // Record Key Bytes
+  unsigned char slave_addr;
+  unsigned char chan_no;
+  // Record Body Bytes
+  unsigned char pwr_state_init;
+  unsigned char dev_caps;
+  unsigned char rsvd[3];
+  unsigned char ent_id;
+  unsigned char ent_inst;
+  unsigned char oem;
+  unsigned char str_type_len;
+  char str[16];
+} sdr_mgmt_t;
+
+// OEM type SDR record; IPMI/Section 43.12
+typedef struct {
+  // Sensor Record Header
+  unsigned char rec_id[2];
+  unsigned char ver;
+  unsigned char type;
+  unsigned char len;
+  // Record Body Bytes
+  unsigned char mfr_id[3];
+  unsigned char oem_data[56];
+} sdr_oem_t;
+
+void plat_sdr_ts_recent_add(time_stamp_t *ts);
+void plat_sdr_ts_recent_erase(time_stamp_t *ts);
+int plat_sdr_num_entries(void);
+int plat_sdr_free_space(void);
+int plat_sdr_rsv_id();
+int plat_sdr_get_entry(int rsv_id, int read_rec_id, sdr_rec_t *rec,
+                       int *next_rec_id);
+int plat_sdr_init(void);
+
+#endif /* __SDR_H__ */
diff --git a/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/sel.c b/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/sel.c
new file mode 100644
index 0000000..a7aa78f
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/sel.c
@@ -0,0 +1,438 @@
+/*
+ *
+ * Copyright 2014-present Facebook. All Rights Reserved.
+ *
+ * This file represents platform specific implementation for storing
+ * SEL logs and acts as back-end for IPMI stack
+ *
+ * TODO: Optimize the file handling to keep file open always instead of
+ * current open/seek/close
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include "sel.h"
+#include "timestamp.h"
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <errno.h>
+#include <syslog.h>
+#include <string.h>
+
+// SEL File.
+#define SEL_LOG_FILE  "/mnt/data/sel.bin"
+
+// SEL Header magic number
+#define SEL_HDR_MAGIC 0xFBFBFBFB
+
+// SEL Header version number
+#define SEL_HDR_VERSION 0x01
+
+// SEL Data offset from file beginning
+#define SEL_DATA_OFFSET 0x100
+
+// SEL reservation IDs can not be 0x00 or 0xFFFF
+#define SEL_RSVID_MIN  0x01
+#define SEL_RSVID_MAX  0xFFFE
+
+// Number of SEL records before wrap
+#define SEL_RECORDS_MAX 128 // TODO: Based on need we can make it bigger
+#define SEL_ELEMS_MAX (SEL_RECORDS_MAX+1)
+
+// Index for circular array
+#define SEL_INDEX_MIN 0x00
+#define SEL_INDEX_MAX SEL_RECORDS_MAX
+
+// Record ID can not be 0x0 (IPMI/Section 31)
+#define SEL_RECID_MIN (SEL_INDEX_MIN+1)
+#define SEL_RECID_MAX (SEL_INDEX_MAX+1)
+
+// Special RecID value for first and last (IPMI/Section 31)
+#define SEL_RECID_FIRST 0x0000
+#define SEL_RECID_LAST 0xFFFF
+
+// SEL header struct to keep track of SEL Log entries
+typedef struct {
+  int magic; // Magic number to check validity
+  int version; // version number of this header
+  int begin; // index to the begining of the log
+  int end; // index to end of the log
+  time_stamp_t ts_add; // last addition time stamp
+  time_stamp_t ts_erase; // last erase time stamp
+} sel_hdr_t;
+
+// Keep track of last Reservation ID
+static int g_rsv_id = 0x01;
+
+// Cached version of SEL Header and data
+static sel_hdr_t g_sel_hdr;
+static sel_msg_t g_sel_data[SEL_ELEMS_MAX];
+
+// Local helper functions to interact with file system
+static int
+file_get_sel_hdr(void) {
+  FILE *fp;
+
+  fp = fopen(SEL_LOG_FILE, "r");
+  if (fp == NULL) {
+    return -1;
+  }
+
+  if (fread(&g_sel_hdr, sizeof(sel_hdr_t), 1, fp) <= 0) {
+    syslog(LOG_ALERT, "file_get_sel_hdr: fread\n");
+    fclose (fp);
+    return -1;
+  }
+
+  fclose(fp);
+  return 0;
+}
+
+static int
+file_get_sel_data(void) {
+  FILE *fp;
+
+  fp = fopen(SEL_LOG_FILE, "r");
+  if (fp == NULL) {
+    syslog(LOG_ALERT, "file_get_sel_data: fopen\n");
+    return -1;
+  }
+
+  if (fseek(fp, SEL_DATA_OFFSET, SEEK_SET)) {
+    syslog(LOG_ALERT, "file_get_sel_data: fseek\n");
+    fclose(fp);
+    return -1;
+  }
+
+  unsigned char buf[SEL_ELEMS_MAX * 16];
+  if (fread(buf, 1, SEL_ELEMS_MAX * sizeof(sel_msg_t), fp) <= 0) {
+    syslog(LOG_ALERT, "file_get_sel_data: fread\n");
+    fclose(fp);
+    return -1;
+  }
+
+  fclose(fp);
+
+  for (int i = 0; i < SEL_ELEMS_MAX; i++) {
+    for (int j = 0; j < sizeof(sel_msg_t);j++) {
+      g_sel_data[i].msg[j] = buf[i*16 + j];
+    }
+  }
+
+  return 0;
+}
+
+static int
+file_store_sel_hdr(void) {
+  FILE *fp;
+
+  fp = fopen(SEL_LOG_FILE, "r+");
+  if (fp == NULL) {
+    syslog(LOG_ALERT, "file_store_sel_hdr: fopen\n");
+    return -1;
+  }
+
+  if (fwrite(&g_sel_hdr, sizeof(sel_hdr_t), 1, fp) <= 0) {
+    syslog(LOG_ALERT, "file_store_sel_hdr: fwrite\n");
+    fclose(fp);
+    return -1;
+  }
+
+  fclose(fp);
+
+  return 0;
+}
+
+static int
+file_store_sel_data(int recId, sel_msg_t *data) {
+  FILE *fp;
+  int index;
+
+  fp = fopen(SEL_LOG_FILE, "r+");
+  if (fp == NULL) {
+    syslog(LOG_ALERT, "file_store_sel_data: fopen\n");
+    return -1;
+  }
+
+  // Records are stored using zero-based index
+  index = (recId-1) * sizeof(sel_msg_t);
+
+  if (fseek(fp, SEL_DATA_OFFSET+index, SEEK_SET)) {
+    syslog(LOG_ALERT, "file_store_sel_data: fseek\n");
+    fclose(fp);
+    return -1;
+  }
+
+  if (fwrite(data->msg, sizeof(sel_msg_t), 1, fp) <= 0) {
+    syslog(LOG_ALERT, "file_store_sel_data: fwrite\n");
+    fclose(fp);
+    return -1;
+  }
+
+  fclose(fp);
+
+  return 0;
+}
+
+// Platform specific SEL API entry points
+// Retrieve time stamp for recent add operation
+void
+plat_sel_ts_recent_add(time_stamp_t *ts) {
+  memcpy(ts->ts, g_sel_hdr.ts_add.ts, 0x04);
+}
+
+// Retrieve time stamp for recent erase operation
+void
+plat_sel_ts_recent_erase(time_stamp_t *ts) {
+  memcpy(ts->ts, g_sel_hdr.ts_erase.ts, 0x04);
+}
+
+// Retrieve total number of entries in SEL log
+int
+plat_sel_num_entries(void) {
+  if (g_sel_hdr.begin <= g_sel_hdr.end) {
+      return (g_sel_hdr.end - g_sel_hdr.begin);
+  } else {
+    return (g_sel_hdr.end + (SEL_INDEX_MAX - g_sel_hdr.begin + 1));
+  }
+}
+
+// Retrieve total free space available in SEL log
+int
+plat_sel_free_space(void) {
+  int total_space;
+  int used_space;
+
+  total_space = SEL_RECORDS_MAX * sizeof(sel_msg_t);
+  used_space = plat_sel_num_entries() * sizeof(sel_msg_t);
+
+  return (total_space - used_space);
+}
+
+// Reserve an ID that will be used in later operations
+// IPMI/Section 31.4
+int
+plat_sel_rsv_id() {
+  // Increment the current reservation ID and return
+  if (g_rsv_id++ == SEL_RSVID_MAX) {
+    g_rsv_id = SEL_RSVID_MIN;
+  }
+
+  return g_rsv_id;
+}
+
+// Get the SEL entry for a given record ID
+// IPMI/Section 31.5
+int
+plat_sel_get_entry(int read_rec_id, sel_msg_t *msg, int *next_rec_id) {
+
+  int index;
+
+  // Find the index in to array based on given index
+  if (read_rec_id == SEL_RECID_FIRST) {
+    index = g_sel_hdr.begin;
+  } else if (read_rec_id == SEL_RECID_LAST) {
+    if (g_sel_hdr.end) {
+      index = g_sel_hdr.end - 1;
+    } else {
+      index = SEL_INDEX_MAX;
+    }
+  } else {
+    index = read_rec_id - 1;
+  }
+
+  // If the log is empty return error
+  if (plat_sel_num_entries() == 0) {
+    syslog(LOG_ALERT, "plat_sel_get_entry: No entries\n");
+    return -1;
+  }
+
+  // Check for boundary conditions
+  if ((index < SEL_INDEX_MIN) || (index > SEL_INDEX_MAX)) {
+    syslog(LOG_ALERT, "plat_sel_get_entry: Invalid Record ID %d\n", read_rec_id);
+    return -1;
+  }
+
+  // If begin < end, check to make sure the given id falls between
+  if (g_sel_hdr.begin < g_sel_hdr.end) {
+    if (index < g_sel_hdr.begin || index >= g_sel_hdr.end) {
+      syslog(LOG_ALERT, "plat_sel_get_entry: Wrong Record ID %d\n", read_rec_id);
+      return -1;
+    }
+  }
+
+  // If end < begin, check to make sure the given id is valid
+  if (g_sel_hdr.begin > g_sel_hdr.end) {
+    if (index >= g_sel_hdr.end && index < g_sel_hdr.begin) {
+      syslog(LOG_ALERT, "plat_sel_get_entry: Wrong Record ID2 %d\n", read_rec_id);
+      return -1;
+    }
+  }
+
+  memcpy(msg->msg, g_sel_data[index].msg, sizeof(sel_msg_t));
+
+  // Return the next record ID in the log
+  *next_rec_id = read_rec_id++;
+  if (*next_rec_id > SEL_INDEX_MAX) {
+    *next_rec_id = SEL_INDEX_MIN;
+  }
+
+  // If this is the last entry in the log, return 0xFFFF
+  if (*next_rec_id == g_sel_hdr.end) {
+    *next_rec_id = SEL_RECID_LAST;
+  }
+
+  return 0;
+}
+
+// Add a new entry in to SEL log
+// IPMI/Section 31.6
+int
+plat_sel_add_entry(sel_msg_t *msg, int *rec_id) {
+  // If the SEL if full, roll over. To keep track of empty condition, use
+  // one empty location less than the max records.
+  if (plat_sel_num_entries() == SEL_RECORDS_MAX) {
+      syslog(LOG_ALERT, "plat_sel_add_entry: SEL rollover\n");
+    if (++g_sel_hdr.begin > SEL_INDEX_MAX) {
+      g_sel_hdr.begin = SEL_INDEX_MIN;
+    }
+  }
+
+  // Update message's time stamp starting at byte 4
+  time_stamp_fill(&msg->msg[3]);
+
+  // Add the enry at end
+  memcpy(g_sel_data[g_sel_hdr.end].msg, msg->msg, sizeof(sel_msg_t));
+
+  // Return the newly added record ID
+  *rec_id = g_sel_hdr.end+1;
+
+  if (file_store_sel_data(*rec_id, msg)) {
+    syslog(LOG_ALERT, "plat_sel_add_entry: file_store_sel_data\n");
+    return -1;
+  }
+
+  // Increment the end pointer
+  if (++g_sel_hdr.end > SEL_INDEX_MAX) {
+    g_sel_hdr.end = SEL_INDEX_MIN;
+  }
+
+  // Update timestamp for add in header
+  time_stamp_fill(g_sel_hdr.ts_add.ts);
+
+  // Store the structure persistently
+  if (file_store_sel_hdr()) {
+    syslog(LOG_ALERT, "plat_sel_add_entry: file_store_sel_hdr\n");
+    return -1;
+  }
+
+  return 0;
+}
+
+// Erase the SEL completely
+// IPMI/Section 31.9
+// Note: To reduce wear/tear, instead of erasing, manipulating the metadata
+int
+plat_sel_erase(int rsv_id) {
+  if (rsv_id != g_rsv_id) {
+    return -1;
+  }
+
+  // Erase SEL Logs
+  g_sel_hdr.begin = SEL_INDEX_MIN;
+  g_sel_hdr.end = SEL_INDEX_MIN;
+
+  // Update timestamp for erase in header
+  time_stamp_fill(g_sel_hdr.ts_erase.ts);
+
+  // Store the structure persistently
+  if (file_store_sel_hdr()) {
+    syslog(LOG_ALERT, "plat_sel_erase: file_store_sel_hdr\n");
+    return -1;
+  }
+
+  return 0;
+}
+
+// To get the erase status while erase happens
+// IPMI/Section 31.2
+// Note: Since we are not doing offline erasing, need not return in-progress state
+int
+plat_sel_erase_status(int rsv_id, sel_erase_stat_t *status) {
+  if (rsv_id != g_rsv_id) {
+    return -1;
+  }
+
+  // Since we do not do any offline erasing, always return erase done
+  *status = SEL_ERASE_DONE;
+
+  return 0;
+}
+
+// Initialize SEL log file
+int
+plat_sel_init(void) {
+  FILE *fp;
+
+  // Check if the file exists or not
+  if (access(SEL_LOG_FILE, F_OK) == 0) {
+    // Since file is present, fetch all the contents to cache
+    if (file_get_sel_hdr()) {
+      syslog(LOG_ALERT, "plat_init_sel: file_get_sel_hdr\n");
+      return -1;
+    }
+
+    if (file_get_sel_data()) {
+      syslog(LOG_ALERT, "plat_init_sel: file_get_sel_data\n");
+      return -1;
+    }
+
+    return 0;
+  }
+
+  // File not present, so create the file
+  fp = fopen(SEL_LOG_FILE, "w+");
+  if (fp == NULL) {
+    syslog(LOG_ALERT, "plat_init_sel: fopen\n");
+    return -1;
+  }
+
+  fclose (fp);
+
+  // Populate SEL Header in to the file
+  g_sel_hdr.magic = SEL_HDR_MAGIC;
+  g_sel_hdr.version = SEL_HDR_VERSION;
+  g_sel_hdr.begin = SEL_INDEX_MIN;
+  g_sel_hdr.end = SEL_INDEX_MIN;
+  memset(g_sel_hdr.ts_add.ts, 0x0, 4);
+  memset(g_sel_hdr.ts_erase.ts, 0x0, 4);
+
+  if (file_store_sel_hdr()) {
+    syslog(LOG_ALERT, "plat_init_sel: file_store_sel_hdr\n");
+    return -1;
+  }
+
+  // Populate SEL Data in to the file
+  for (int i = 1;  i <= SEL_RECORDS_MAX; i++) {
+    sel_msg_t msg = {0};
+    if (file_store_sel_data(i, &msg)) {
+      syslog(LOG_ALERT, "plat_init_sel: file_store_sel_data\n");
+      return -1;
+    }
+  }
+
+  return 0;
+}
diff --git a/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/sel.h b/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/sel.h
new file mode 100644
index 0000000..81dbcdf
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/sel.h
@@ -0,0 +1,51 @@
+/*
+ *
+ * Copyright 2014-present Facebook. All Rights Reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __SEL_H__
+#define __SEL_H__
+
+#include "timestamp.h"
+
+enum {
+  IPMI_SEL_INIT_ERASE = 0xAA,
+  IPMI_SEL_ERASE_STAT = 0x00,
+};
+
+typedef enum {
+  SEL_ERASE_IN_PROG = 0x00,
+  SEL_ERASE_DONE = 0x01,
+} sel_erase_stat_t;
+
+typedef struct {
+  unsigned char msg[16];
+} sel_msg_t;
+
+void plat_sel_ts_recent_add(time_stamp_t *ts);
+void plat_sel_ts_recent_erase(time_stamp_t *ts);
+int plat_sel_num_entries(void);
+int plat_sel_free_space(void);
+int plat_sel_rsv_id();
+int plat_sel_get_entry(int read_rec_id, sel_msg_t *msg, int *next_rec_id);
+int plat_sel_add_entry(sel_msg_t *msg, int *rec_id);
+int plat_sel_erase(int rsv_id);
+int plat_sel_erase_status(int rsv_id, sel_erase_stat_t *status);
+int plat_sel_init(void);
+
+#endif /* __SEL_H__ */
diff --git a/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/sensor.h b/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/sensor.h
new file mode 100644
index 0000000..5d8c11a
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/sensor.h
@@ -0,0 +1,117 @@
+/*
+ *
+ * Copyright 2014-present Facebook. All Rights Reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __SENSOR_H__
+#define __SENSOR_H__
+
+#include "timestamp.h"
+
+#define IANA_ID_SIZE 3
+#define SENSOR_STR_SIZE 16
+#define SENSOR_OEM_DATA_SIZE 56
+
+// Threshold Sensor Descriptor
+typedef struct {
+  unsigned char owner;
+  unsigned char lun;
+  unsigned char sensor_num;
+  unsigned char ent_id;
+  unsigned char ent_inst;
+  unsigned char sensor_init;
+  unsigned char sensor_caps;
+  unsigned char sensor_type;
+  unsigned char evt_read_type;
+  unsigned char lt_read_mask[2];
+  unsigned char ut_read_mask[2];
+  unsigned char set_thresh_mask[2];
+  unsigned char sensor_units1;
+  unsigned char sensor_units2;
+  unsigned char sensor_units3;
+  unsigned char linear;
+  unsigned char m_val;
+  unsigned char m_tolerance;
+  unsigned char b_val;
+  unsigned char b_accuracy;
+  unsigned char accuracy_dir;
+  unsigned char rb_exp;
+  unsigned char analog_flags;
+  unsigned char nominal;
+  unsigned char normal_max;
+  unsigned char normal_min;
+  unsigned char max_reading;
+  unsigned char min_reading;
+  unsigned char unr_thresh;
+  unsigned char uc_thresh;
+  unsigned char unc_thresh;
+  unsigned char lnr_thresh;
+  unsigned char lc_thresh;
+  unsigned char lnc_thresh;
+  unsigned char pos_hyst;
+  unsigned char neg_hyst;
+  unsigned char oem;
+  unsigned char str_type_len;
+  char str[SENSOR_STR_SIZE];
+} sensor_thresh_t;
+
+// Discrete Sensor Descriptor
+typedef struct {
+  unsigned char owner;
+  unsigned char lun;
+  unsigned char sensor_num;
+  unsigned char ent_id;
+  unsigned char ent_inst;
+  unsigned char sensor_init;
+  unsigned char sensor_caps;
+  unsigned char sensor_type;
+  unsigned char evt_read_type;
+  unsigned char assert_evt_mask[2];
+  unsigned char deassert_evt_mask[2];
+  unsigned char read_evt_mask[2];
+  unsigned char oem;
+  unsigned char str_type_len;
+  char str[SENSOR_STR_SIZE];
+} sensor_disc_t;
+
+// Mgmt. Controller Sensor Descriptor
+typedef struct {
+  unsigned char slave_addr;
+  unsigned char chan_no;
+  unsigned char pwr_state_init;
+  unsigned char dev_caps;
+  unsigned char ent_id;
+  unsigned char ent_inst;
+  unsigned char oem;
+  unsigned char str_type_len;
+  char str[SENSOR_STR_SIZE];
+} sensor_mgmt_t;
+
+// OEM type Sensor Descriptor
+typedef struct {
+  unsigned char mfr_id[IANA_ID_SIZE];
+  unsigned char oem_data[SENSOR_OEM_DATA_SIZE];
+} sensor_oem_t;
+
+void plat_sensor_mgmt_info(int *num, sensor_mgmt_t **p_sensor);
+void plat_sensor_disc_info(int *num, sensor_disc_t **p_sensor);
+void plat_sensor_thresh_info(int *num, sensor_thresh_t **p_sensor);
+void plat_sensor_oem_info(int *num, sensor_oem_t **p_sensor);
+int plat_sensor_init(void);
+
+#endif /* __SENSOR_H__ */
diff --git a/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/timestamp.c b/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/timestamp.c
new file mode 100644
index 0000000..11ac03e
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/timestamp.c
@@ -0,0 +1,46 @@
+/*
+ *
+ * Copyright 2014-present Facebook. All Rights Reserved.
+ *
+ * This file is a helper file to fill timestamps from platform
+ * used by SEL Logs, SDR records etc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <errno.h>
+#include <syslog.h>
+#include <string.h>
+#include <sys/time.h>
+#include <time.h>
+
+// Local helper function to fill time stamp
+void
+time_stamp_fill(unsigned char *ts) {
+  unsigned int time;
+  struct timeval tv;
+
+  gettimeofday(&tv, NULL);
+
+  time = tv.tv_sec;
+  ts[0] = time & 0xFF;
+  ts[1] = (time >> 8) & 0xFF;
+  ts[2] = (time >> 16) & 0xFF;
+  ts[3] = (time >> 24) & 0xFF;
+
+  return;
+}
diff --git a/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/timestamp.h b/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/timestamp.h
new file mode 100644
index 0000000..430dd23
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/timestamp.h
@@ -0,0 +1,30 @@
+/*
+ *
+ * Copyright 2014-present Facebook. All Rights Reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __TIMESTAMP_H__
+#define __TIMESTAMP_H__
+
+typedef struct {
+  unsigned char ts[4];
+} time_stamp_t;
+
+void time_stamp_fill(unsigned char *ts);
+
+#endif /* __TIMESTAMP_H__ */
diff --git a/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/wedge/fruid.c b/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/wedge/fruid.c
new file mode 100644
index 0000000..5076ebe
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/wedge/fruid.c
@@ -0,0 +1,185 @@
+/*
+ *
+ * Copyright 2015-present Facebook. All Rights Reserved.
+ *
+ * This file provides platform specific implementation of FRUID information
+ *
+ * FRUID specification can be found at
+ * www.intel.com/content/dam/www/public/us/en/documents/product-briefs/platform-management-fru-document-rev-1-2-feb-2013.pdf
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "../fruid.h"
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <errno.h>
+#include <syslog.h>
+#include <string.h>
+//#include <facebook/wedge_eeprom.h>
+
+#define WEDGE_FRUID_SIZE 0x100
+
+#define COMMON_HDR_VER  1
+#define PROD_INFO_VER  1
+
+#define PROD_INFO_AREA_OFFSET 0x10
+#define PROD_INFO_CKSUM_OFFSET (PROD_INFO_AREA_OFFSET + 1)
+#define LANG_CODE_ENGLISH 25
+#define TYPE_STR 0xC0
+#define TYPE_LAST 0xC1
+#define ZERO_CKSUM_CONST 0x100
+#define LEN_BYTE_SIZE 8
+
+typedef struct _fruid_common_hdr_t {
+  unsigned char ver;
+  unsigned char internal_use_area_offset;
+  unsigned char chassis_info_area_offset;
+  unsigned char board_info_area_offset;
+  unsigned char prod_info_area_offset;
+  unsigned char multi_record_area_offset;
+  unsigned char padding;
+  unsigned char cksum;
+} fruid_common_hdr_t;
+
+// Global structures
+static unsigned char g_fruid[WEDGE_FRUID_SIZE] = {0};
+
+static void
+populate_fruid(void) {
+
+  memset(&g_fruid, sizeof(g_fruid), 0);
+
+#if 0
+  fruid_common_hdr_t *chdr = g_fruid;
+
+  // Set Common Header version
+  chdr->ver = COMMON_HDR_VER;
+
+  // Product Info Area offset in multiples of 8 bytes
+  chdr->prod_info_area_offset = PROD_INFO_AREA_OFFSET/LEN_BYTE_SIZE;
+
+  // Calculate zero checksum
+  chdr->cksum = chdr->ver + chdr->prod_info_area_offset;
+  chdr->cksum = ZERO_CKSUM_CONST - chdr->cksum;
+
+  // Retrieve Wedge EEPROM content
+  struct wedge_eeprom_st eeprom;
+  int rc = 0;
+  rc = wedge_eeprom_parse(NULL, &eeprom);
+  if (rc)
+  {
+    syslog(LOG_ALERT, "populate_fruid: wedge_eeprom_parse returns %d\n", rc);
+    return;
+  }
+
+  // Start index at beginning of product info area
+  int i = PROD_INFO_AREA_OFFSET;
+  g_fruid[i++] = PROD_INFO_VER;
+  g_fruid[i++] = 0x00; // prod area length; filled at end
+  g_fruid[i++] = LANG_CODE_ENGLISH;
+
+#define _APPEND_STR_VALUE(name) do { \
+      if (sizeof(name) < 1 || i + 1 + sizeof(name) >= sizeof(g_fruid)) { \
+                break; \
+            } \
+      g_fruid[i++] = TYPE_STR + sizeof(name); \
+      memcpy(&g_fruid[i], name, sizeof(name)); \
+      i += sizeof(name); \
+} while(0)
+
+  // Fill system manufacturer field
+
+  _APPEND_STR_VALUE(eeprom.fbw_system_manufacturer);
+
+  // Fill product name field
+  _APPEND_STR_VALUE(eeprom.fbw_product_name);
+
+  // Fill product number field
+  _APPEND_STR_VALUE(eeprom.fbw_product_number);
+
+  // convert product version to string and fill
+  char vbuf[5] = {0};
+  snprintf(vbuf, sizeof(vbuf), "%0X", eeprom.fbw_product_version);
+  _APPEND_STR_VALUE(vbuf);
+
+  // Fill product serial number field
+  _APPEND_STR_VALUE(eeprom.fbw_product_serial);
+
+  // Fill product asset tag field
+  _APPEND_STR_VALUE(eeprom.fbw_product_asset);
+
+  // Fill fruid file with dummy file name
+  char fruid_file_name[] = "fruid_1.0";
+  _APPEND_STR_VALUE(fruid_file_name);
+
+  // Field to indicate the last entry
+  g_fruid[i++] = TYPE_LAST;
+
+  // length of the area in multiples of 8 bytes
+  int len = i-PROD_INFO_AREA_OFFSET+1;
+  if (len % LEN_BYTE_SIZE){
+    // For non-multiple of 8 bytes, add one for partial data
+    g_fruid[PROD_INFO_CKSUM_OFFSET] = len/LEN_BYTE_SIZE + 1;
+    // And also increment index to keep checksum byte
+    i += (len % LEN_BYTE_SIZE);
+  } else {
+    g_fruid[PROD_INFO_CKSUM_OFFSET] = len/LEN_BYTE_SIZE;
+  }
+
+  // Calculate zero checksum by adding all the values in product info area
+  for (int j = PROD_INFO_AREA_OFFSET; j < i; j++) {
+    g_fruid[i] += g_fruid[j];
+  }
+
+  // Calculate final cksum by subtraction
+  g_fruid[i] = ZERO_CKSUM_CONST - g_fruid[i];
+
+#undef _APPEND_STR_VALUE
+#endif
+
+  return;
+}
+
+// Access functions for FRUID
+int
+plat_fruid_size(void) {
+  return WEDGE_FRUID_SIZE;
+}
+
+int
+plat_fruid_data(int offset, int count, unsigned char *data) {
+  // Check for the boundary condition
+  if ((offset + count) > WEDGE_FRUID_SIZE) {
+    return -1;
+  }
+
+  // Copy the FRUID content from the global structure
+  memcpy(data, &(g_fruid[offset]), count);
+
+  return 0;
+}
+
+// Initialize FRUID
+int
+plat_fruid_init(void) {
+
+  // Populate FRUID global structure
+  populate_fruid();
+
+  return 0;
+}
diff --git a/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/wedge/sensor.c b/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/wedge/sensor.c
new file mode 100644
index 0000000..ce3d4fb
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/ipmid/files/platform/wedge/sensor.c
@@ -0,0 +1,371 @@
+/*
+ *
+ * Copyright 2014-present Facebook. All Rights Reserved.
+ *
+ * This file provides platform specific implementation of sensor information
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include "../sensor.h"
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <errno.h>
+#include <syslog.h>
+#include <string.h>
+
+#define SENSOR_MGMT_MAX 1
+#define SENSOR_DISC_MAX 8
+#define SENSOR_THRESH_MAX 1
+#define SENSOR_OEM_MAX 1
+
+#define BMC_SLAVE_ADDR 0x20
+
+typedef struct {
+  unsigned char num;
+  sensor_mgmt_t sensor[SENSOR_MGMT_MAX];
+} sensor_mgmt_info_t;
+
+typedef struct {
+  unsigned char num;
+  sensor_disc_t sensor[SENSOR_DISC_MAX];
+} sensor_disc_info_t;
+
+typedef struct {
+  unsigned char num;
+  sensor_thresh_t sensor[SENSOR_THRESH_MAX];
+} sensor_thresh_info_t;
+
+typedef struct {
+  unsigned char num;
+  sensor_oem_t sensor[SENSOR_OEM_MAX];
+} sensor_oem_info_t;
+
+// Global structures
+static sensor_mgmt_info_t g_sensor_mgmt = {0};
+static sensor_disc_info_t g_sensor_disc = {0};
+static sensor_thresh_info_t g_sensor_thresh = {0};
+static sensor_oem_info_t g_sensor_oem = {0};
+
+static void
+populate_mgmt_sensors(void) {
+  sensor_mgmt_t sensor = {0};
+
+  // Add record for the AST2100 BMC
+  sensor.slave_addr = BMC_SLAVE_ADDR;
+  sensor.chan_no = 0x0; // Primary BMC controller
+
+  // Init Agent = false
+  sensor.pwr_state_init = 0x00;
+
+  // FRUID = true, SEL = true, SDR = true, Sensor = true
+  sensor.dev_caps = 0x0F;
+
+  // Device ID string
+  // Type - 0xC0: ASCII, Length - 0x09
+  sensor.str_type_len = 0xC0 + 0x09;
+  strncpy(sensor.str, "Wedge-BMC", 0x09);
+
+  // Add this sensor to the global table
+  if (g_sensor_mgmt.num >= SENSOR_MGMT_MAX) {
+    syslog(LOG_ALERT, "populate_mgmt_sensors: num exceeded\n");
+    return;
+  }
+
+  memcpy(&g_sensor_mgmt.sensor[g_sensor_mgmt.num], &sensor, sizeof(sensor_mgmt_t));
+
+  g_sensor_mgmt.num++;
+
+  return;
+}
+
+static void
+populate_disc_sensors(void) {
+
+  sensor_disc_t sensor = {0};
+
+  // Sensor uS Status
+  // Sensor# 0x10
+  // EntitiyId# 0xD0, EntityInst# 0x00
+  // Sensor Type# Chassis 0x18
+  // Event Read/Type# OEM 0x70
+  sensor.owner= BMC_SLAVE_ADDR;
+  sensor.lun = 0x00;
+  sensor.sensor_num = 0x10;
+
+  sensor.ent_id = 0xD0;
+  sensor.ent_inst = 0x00;
+  // Enable Scanning, Enable Events
+  sensor.sensor_init = 0x63;
+  // Supports Auto Re-Arm
+  sensor.sensor_caps = 0x40;
+  sensor.sensor_type = 0x18;
+  sensor.evt_read_type = 0x70;
+  // 1-bit for CPU0 Thermal Trip
+  sensor.assert_evt_mask[0] = 0x04;
+  sensor.deassert_evt_mask[0] = 0x00;
+  sensor.read_evt_mask[0] = 0x04;
+
+  // Device ID string
+  // Type - 0xC0: ASCII, Length - 12
+  sensor.str_type_len = 0xC0 + 9;
+  strncpy(sensor.str, "uS-Status", 9);
+
+  // Add this sensor to the global table
+  if (g_sensor_disc.num >= SENSOR_DISC_MAX) {
+    syslog(LOG_ALERT, "populate_disc_sensors: num exceeded\n");
+    return;
+  }
+
+  memcpy(&g_sensor_disc.sensor[g_sensor_disc.num], &sensor, sizeof(sensor_disc_t));
+
+  g_sensor_disc.num++;
+
+  // Sensor SEL Status
+  // Sensor# 0x5F
+  // EntitiyId# 0xD0, EntityInst# 0x02
+  // Sensor Type# OEM: 0xC0
+  // Event Read/Type# Sensor Specific: 0x6F
+  sensor.owner= BMC_SLAVE_ADDR;
+  sensor.lun = 0x00;
+  sensor.sensor_num = 0x5F;
+
+  sensor.ent_id = 0xD0;
+  sensor.ent_inst = 0x02;
+  // Enable Scanning, Enable Events
+  sensor.sensor_init = 0x63;
+  // Supports Auto Re-Arm
+  sensor.sensor_caps = 0x40;
+  sensor.sensor_type = 0xC0;
+  sensor.evt_read_type = 0x6F;
+  // SEL Clear(bit1), SEL Rollover(bit8)
+  sensor.assert_evt_mask[0] = 0x02;
+  sensor.assert_evt_mask[1] = 0x01;
+  sensor.deassert_evt_mask[0] = 0x00;
+  sensor.deassert_evt_mask[1] = 0x00;
+  sensor.read_evt_mask[0] = 0x02;
+  sensor.read_evt_mask[1] = 0x01;
+
+  // Device ID string
+  // Type - 0xC0: ASCII, Length - 12
+  sensor.str_type_len = 0xC0 + 10;
+  strncpy(sensor.str, "SEL-Status", 10);
+
+  // Add this sensor to the global table
+  if (g_sensor_disc.num >= SENSOR_DISC_MAX) {
+    syslog(LOG_ALERT, "populate_disc_sensors: num exceeded\n");
+    return;
+  }
+
+  memcpy(&g_sensor_disc.sensor[g_sensor_disc.num], &sensor, sizeof(sensor_disc_t));
+
+  g_sensor_disc.num++;
+
+
+  // Sensor WDT
+  // Sensor# 0x60
+  // EntitiyId# 0xD0, EntityInst# 0x03
+  // Sensor Type# WDT2: 0x23
+  // Event Read/Type# Sensor Specific: 0x6F
+  sensor.owner= BMC_SLAVE_ADDR;
+  sensor.lun = 0x00;
+  sensor.sensor_num = 0x60;
+
+  sensor.ent_id = 0xD0;
+  sensor.ent_inst = 0x03;
+  // Enable Scanning, Enable Events
+  sensor.sensor_init = 0x63;
+  // Supports Auto Re-Arm
+  sensor.sensor_caps = 0x40;
+  sensor.sensor_type = 0x23;
+  sensor.evt_read_type = 0x6F;
+  // 5 bits for expiry, reset, pwrdown, pwrcycle, timer
+  sensor.assert_evt_mask[0] = 0x0F;
+  sensor.assert_evt_mask[1] = 0x01;
+  sensor.deassert_evt_mask[0] = 0x00;
+  sensor.deassert_evt_mask[1] = 0x00;
+  sensor.read_evt_mask[0] = 0x0F;
+  sensor.read_evt_mask[1] = 0x01;
+
+  // Device ID string
+  // Type - 0xC0: ASCII, Length - 12
+  sensor.str_type_len = 0xC0 + 3;
+  strncpy(sensor.str, "WDT", 3);
+
+  // Add this sensor to the global table
+  if (g_sensor_disc.num >= SENSOR_DISC_MAX) {
+    syslog(LOG_ALERT, "populate_disc_sensors: num exceeded\n");
+    return;
+  }
+
+  memcpy(&g_sensor_disc.sensor[g_sensor_disc.num], &sensor, sizeof(sensor_disc_t));
+
+  g_sensor_disc.num++;
+
+
+  // Sensor Chassis Pwr Sts
+  // Sensor# 0x70
+  // EntitiyId# 0x15, EntityInst# 0x00
+  // Sensor Type# OEM: 0xC8
+  // Event Read/Type# Sensor Specific: 0x6F
+  sensor.owner= BMC_SLAVE_ADDR;
+  sensor.lun = 0x00;
+  sensor.sensor_num = 0x70;
+
+  sensor.ent_id = 0x15;
+  sensor.ent_inst = 0x00;
+  // Enable Scanning, Enable Events
+  sensor.sensor_init = 0x63;
+  // Supports Auto Re-Arm
+  sensor.sensor_caps = 0x40;
+  sensor.sensor_type = 0xC8;
+  sensor.evt_read_type = 0x6F;
+  // 6 bits for pwroff, pwrcycle, pwron, softdown, ac-lost, hard-reset
+  sensor.assert_evt_mask[0] = 0x3F;
+  sensor.deassert_evt_mask[0] = 0x00;
+  sensor.read_evt_mask[0] = 0x3F;
+
+  // Device ID string
+  // Type - 0xC0: ASCII, Length - 12
+  sensor.str_type_len = 0xC0 + 13;
+  strncpy(sensor.str, "CH-Pwr-Status", 13);
+
+  // Add this sensor to the global table
+  if (g_sensor_disc.num >= SENSOR_DISC_MAX) {
+    syslog(LOG_ALERT, "populate_disc_sensors: num exceeded\n");
+    return;
+  }
+
+  memcpy(&g_sensor_disc.sensor[g_sensor_disc.num], &sensor, sizeof(sensor_disc_t));
+
+  g_sensor_disc.num++;
+
+  // Sensor CPU DIMM Hot
+  // Sensor# 0xB3
+  // EntitiyId# 0xD0, EntityInst# 0x05
+  // Sensor Type# OEM 0xC6
+  // Event Read/Type# Sensor Specific 6Fh
+  sensor.owner= BMC_SLAVE_ADDR;
+  sensor.lun = 0x00;
+  sensor.sensor_num = 0xB3;
+
+  sensor.ent_id = 0xD0;
+  sensor.ent_inst = 0x05;
+  // Enable Scanning, Enable Events
+  sensor.sensor_init = 0x63;
+  // Supports Auto Re-Arm
+  sensor.sensor_caps = 0x40;
+  sensor.sensor_type = 0xC6;
+  sensor.evt_read_type = 0x6F;
+  // Two bits for CPU Hot, DIMM Hot
+  sensor.assert_evt_mask[0] = 0x05;
+  sensor.deassert_evt_mask[0] = 0x05;
+  sensor.read_evt_mask[0] = 0x05;
+
+  // Device ID string
+  // Type - 0xC0: ASCII, Length - 12
+  sensor.str_type_len = 0xC0 + 12;
+  strncpy(sensor.str, "CPU_DIMM_HOT", 12);
+
+  // Add this sensor to the global table
+  if (g_sensor_disc.num >= SENSOR_DISC_MAX) {
+    syslog(LOG_ALERT, "populate_disc_sensors: num exceeded\n");
+    return;
+  }
+
+  memcpy(&g_sensor_disc.sensor[g_sensor_disc.num], &sensor, sizeof(sensor_disc_t));
+
+  g_sensor_disc.num++;
+
+  // Sensor PMBus Status Word Low
+  // Sensor PMBus Status Word High
+  // Sensor PMBus Status MFR
+  // Sensor PMBus Status Input
+  // Sensor NTP Status
+  // Sensor# 0xED
+  // EntitiyId# 0x35, EntityInst# 0x00
+  // Sensor Type# OEM 0xC7
+  // Event Read/Type# Sensor Specific 6Fh
+  sensor.owner= BMC_SLAVE_ADDR;
+  sensor.lun = 0x00;
+  sensor.sensor_num = 0xED;
+
+  sensor.ent_id = 0x35;
+  sensor.ent_inst = 0x00;
+  // Enable Scanning, Enable Events
+  sensor.sensor_init = 0x63;
+  // Supports Auto Re-Arm
+  sensor.sensor_caps = 0x40;
+  sensor.sensor_type = 0xC7;
+  sensor.evt_read_type = 0x6F;
+  // 1-bit for date/time sync failed
+  sensor.assert_evt_mask[0] = 0x01;
+  sensor.deassert_evt_mask[0] = 0x00;
+  sensor.read_evt_mask[0] = 0x01;
+
+  // Device ID string
+  // Type - 0xC0: ASCII, Length - 10
+  sensor.str_type_len = 0xC0 + 12;
+  strncpy(sensor.str, "NTP-Status", 10);
+
+  // Add this sensor to the global table
+  if (g_sensor_disc.num >= SENSOR_DISC_MAX) {
+    syslog(LOG_ALERT, "populate_disc_sensors: num exceeded\n");
+    return;
+  }
+
+  memcpy(&g_sensor_disc.sensor[g_sensor_disc.num], &sensor, sizeof(sensor_disc_t));
+
+  g_sensor_disc.num++;
+
+  return;
+}
+
+// Access functions for Sensor Table
+void
+plat_sensor_mgmt_info(int *p_num, sensor_mgmt_t **p_sensor) {
+  *p_num = g_sensor_mgmt.num;
+  *p_sensor = g_sensor_mgmt.sensor;
+}
+
+void
+plat_sensor_disc_info(int *p_num, sensor_disc_t **p_sensor) {
+  *p_num = g_sensor_disc.num;
+  *p_sensor = g_sensor_disc.sensor;
+}
+
+void
+plat_sensor_thresh_info(int *p_num, sensor_thresh_t **p_sensor) {
+  *p_num = g_sensor_thresh.num;
+  *p_sensor = g_sensor_thresh.sensor;
+}
+
+void
+plat_sensor_oem_info(int *p_num, sensor_oem_t **p_sensor) {
+  *p_num = g_sensor_oem.num;
+  *p_sensor = g_sensor_oem.sensor;
+}
+
+// Initialize Sensor Table
+int
+plat_sensor_init(void) {
+
+  // Populate all Sensors
+  populate_mgmt_sensors();
+  populate_disc_sensors();
+
+  return 0;
+}
diff --git a/meta-raptor/meta-asus/recipes-asus/ipmid/files/setup-ipmid.sh b/meta-raptor/meta-asus/recipes-asus/ipmid/files/setup-ipmid.sh
new file mode 100644
index 0000000..b724d70
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/ipmid/files/setup-ipmid.sh
@@ -0,0 +1,32 @@
+#!/bin/sh
+#
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+### BEGIN INIT INFO
+# Provides:          setup-ipmid
+# Required-Start:
+# Required-Stop:
+# Default-Start:     S
+# Default-Stop:
+# Short-Description: Set IPMI Message handler
+### END INIT INFO
+
+echo -n "Setup IPMI message handler... "
+/usr/local/bin/ipmid
+echo "done."
diff --git a/meta-raptor/meta-asus/recipes-asus/ipmid/ipmid_0.1.bb b/meta-raptor/meta-asus/recipes-asus/ipmid/ipmid_0.1.bb
new file mode 100644
index 0000000..7ec7eaf
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/ipmid/ipmid_0.1.bb
@@ -0,0 +1,70 @@
+# Copyright 2014-present Facebook. All Rights Reserved.
+# Copyright 2017 Raptor Engineering, LLC.  All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+
+SUMMARY = "IPMI Daemon"
+DESCRIPTION = "Daemon to handle IPMI Messages."
+SECTION = "base"
+PR = "r1"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://ipmid.c;beginline=8;endline=20;md5=da35978751a9d71b73679307c4d296ec"
+
+
+DEPENDS_append = " update-rc.d-native"
+
+SRC_URI = "file://Makefile \
+           file://setup-ipmid.sh \
+           file://ipmid.c \
+           file://platform/timestamp.c \
+           file://platform/timestamp.h \
+           file://platform/sel.c \
+           file://platform/sel.h \
+           file://platform/sdr.c \
+           file://platform/sdr.h \
+           file://platform/sensor.h \
+           file://platform/fruid.h \
+           file://platform/wedge/sensor.c \
+           file://platform/wedge/fruid.c \
+          "
+
+S = "${WORKDIR}"
+
+binfiles = "ipmid"
+
+pkgdir = "ipmid"
+
+do_install() {
+  dst="${D}/usr/local/fbpackages/${pkgdir}"
+  bin="${D}/usr/local/bin"
+  install -d $dst
+  install -d $bin
+  install -m 755 ipmid ${dst}/ipmid
+  ln -snf ../fbpackages/${pkgdir}/ipmid ${bin}/ipmid
+  install -d ${D}${sysconfdir}/init.d
+  install -d ${D}${sysconfdir}/rcS.d
+  install -m 755 setup-ipmid.sh ${D}${sysconfdir}/init.d/setup-ipmid.sh
+  update-rc.d -r ${D} setup-ipmid.sh start 64 S .
+}
+
+FBPACKAGEDIR = "${prefix}/local/fbpackages"
+
+FILES_${PN} = "${FBPACKAGEDIR}/ipmid ${prefix}/local/bin ${sysconfdir} "
+
+# Inhibit complaints about .debug directories for the fand binary:
+
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
+INHIBIT_PACKAGE_STRIP = "1"
diff --git a/meta-raptor/meta-asus/recipes-asus/lm_sensors/files/wedge.conf b/meta-raptor/meta-asus/recipes-asus/lm_sensors/files/wedge.conf
new file mode 100644
index 0000000..266a695
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/lm_sensors/files/wedge.conf
@@ -0,0 +1,77 @@
+
+bus "i2c-3" "ast_i2c.3"
+
+bus "i2c-4" "ast_i2c.4"
+
+bus "i2c-6" "ast_i2c.6"
+
+chip "tmp75-i2c-3-48"
+     label temp1 "Inlet Temp"
+     set temp1_max 70
+     set temp1_max_hyst 60
+
+chip "tmp75-i2c-3-49"
+     label temp1 "Switch Temp"
+     set temp1_max 70
+     set temp1_max_hyst 60
+
+chip "tmp75-i2c-3-4a"
+     label temp1 "Outlet Temp"
+     set temp1_max 70
+     set temp1_max_hyst 60
+
+chip "tmp75-i2c-4-4c"
+     label temp1 "Microserver Ambient Temp"
+
+chip "max127-i2c-6-28"
+     label in0 "+1 Voltage"
+     label in1 "+2.5 Voltage"
+     ignore in2
+     label in3 "+1 Voltage"
+     ignore in4
+     label in5 "+3.3 Voltage"
+     label in6 "+5 Voltage"
+     ignore in7
+
+chip "ast_pwm-*"
+     label fan1 "Fan 2 front"
+     label fan2 "Fan 3 front"
+     label fan3 "Fan 1 front"
+     label fan4 "Fan 0 front"
+     label fan5 "Fan 2 rear"
+     label fan6 "Fan 3 rear"
+     label fan7 "Fan 1 rear"
+     label fan8 "Fan 0 rear"
+     ignore fan9
+     ignore fan10
+     ignore fan11
+     ignore fan12
+     ignore fan13
+     ignore fan14
+     ignore fan15
+     ignore fan16
+
+chip "fb_panther_plus-*"
+     label temp1 "CPU Temp"
+     label temp2 "DIMM0 Temp"
+     ignore temp3
+     ignore temp4
+     ignore temp5
+
+chip "ast_adc-isa-0000"
+     ignore in0
+     ignore in1
+     ignore in2
+     ignore in3
+     ignore in4
+     label in5 "+1 Core Voltage"
+     label in6 "+1 Analog Voltage"
+     label in7 "+5 Voltage"
+     label in8 "+3.3 Voltage"
+     label in9 "+2.5 Voltage"
+     ignore in10
+     ignore in11
+     ignore in12
+     ignore in13
+     ignore in14
+     ignore in15
diff --git a/meta-raptor/meta-asus/recipes-asus/lm_sensors/lmsensors_%.bbappend b/meta-raptor/meta-asus/recipes-asus/lm_sensors/lmsensors_%.bbappend
new file mode 100644
index 0000000..90a3954
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/lm_sensors/lmsensors_%.bbappend
@@ -0,0 +1,14 @@
+
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+SRC_URI += "file://wedge.conf \
+           "
+
+do_install_board_config() {
+    install -d ${D}${sysconfdir}/sensors.d
+    install -m 644 ../wedge.conf ${D}${sysconfdir}/sensors.d/wedge.conf
+}
+
+do_install_append() {
+    do_install_board_config
+}
diff --git a/meta-raptor/meta-asus/recipes-asus/po-eeprom/files/Makefile b/meta-raptor/meta-asus/recipes-asus/po-eeprom/files/Makefile
new file mode 100644
index 0000000..0b3fd71
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/po-eeprom/files/Makefile
@@ -0,0 +1,26 @@
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+
+all: po-eeprom
+
+po-eeprom: po-eeprom.o
+	$(CC) -o $@ $^ $(LDFLAGS)
+
+.PHONY: clean
+
+clean:
+	rm -rf *.o po-eeprom
diff --git a/meta-raptor/meta-asus/recipes-asus/po-eeprom/files/po-eeprom.c b/meta-raptor/meta-asus/recipes-asus/po-eeprom/files/po-eeprom.c
new file mode 100644
index 0000000..46debee
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/po-eeprom/files/po-eeprom.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright 2014-present Facebook. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <sys/types.h>
+
+#define SERIAL_LEN 17
+
+usage()
+{
+  fprintf(stderr, "Usage:  po-eeprom filename [filename...]\n"
+	  "\twhere filename is the location of the PowerOne EEPROM, likely\n"
+	  "\t/sys/bus/i2c/drivers/at24/7-0051/eeprom or\n"
+	  "\t/sys/bus/i2c/drivers/at24/7-0052/eeprom\n");
+  exit(2);
+}
+
+int safe_read(int fd, void *buf, size_t size, char *msg)
+{
+  if (read(fd, buf, size) != size) {
+    perror(msg);
+    exit(3);
+  }
+}
+
+int main(int argc, char **argv)
+{
+  int fd;
+  int file = 1;
+  uint8_t size;
+  uint8_t junk;
+  uint16_t crc;
+  char serial[SERIAL_LEN + 1];
+
+  if (argc < 2)
+    usage();
+
+  while (file < argc) {
+    fd = open(argv[file], O_RDONLY);
+    if (fd < 0) {
+      fprintf(stderr, "Couldn't open %s for EEPROM reading\n", argv[1]);
+      exit(1);
+    }
+
+    safe_read(fd, &size, sizeof(size), "read size");
+    safe_read(fd, &junk, sizeof(junk), "read junk");
+    /*
+     * Should probably check CRC here, PowerOne provided some code where
+     * it looks like a pretty standard CCITT CRC16.
+     */
+    safe_read(fd, &crc, sizeof(crc), "read CRC len");
+    safe_read(fd, serial, SERIAL_LEN, "read serial number");
+
+    serial[SERIAL_LEN] = 0;
+    printf("Serial number:  %s\n", serial);
+    close(fd);
+    file++;
+  }
+}
diff --git a/meta-raptor/meta-asus/recipes-asus/po-eeprom/po-eeprom_0.1.bb b/meta-raptor/meta-asus/recipes-asus/po-eeprom/po-eeprom_0.1.bb
new file mode 100644
index 0000000..ad635dc
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/po-eeprom/po-eeprom_0.1.bb
@@ -0,0 +1,42 @@
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+SUMMARY = "PowerOne EEPROM Utilities"
+DESCRIPTION = "Util for PowerOne eeprom"
+SECTION = "base"
+PR = "r1"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://po-eeprom.c;beginline=4;endline=16;md5=da35978751a9d71b73679307c4d296ec"
+
+SRC_URI = "file://po-eeprom.c \
+	   file://Makefile \
+          "
+
+S = "${WORKDIR}"
+
+do_install() {
+	install -d ${D}${bindir}
+	install -m 0755 po-eeprom ${D}${bindir}/po-eeprom
+}
+
+FILES_${PN} = "${bindir}"
+
+# Inhibit complaints about .debug directories
+
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
+INHIBIT_PACKAGE_STRIP = "1"
diff --git a/meta-raptor/meta-asus/recipes-asus/rest-api/files/bmc_command.py b/meta-raptor/meta-asus/recipes-asus/rest-api/files/bmc_command.py
new file mode 100644
index 0000000..d4dc877
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/rest-api/files/bmc_command.py
@@ -0,0 +1,112 @@
+#!/usr/bin/env python
+#
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+from __future__ import absolute_import
+from __future__ import division
+from __future__ import print_function
+from __future__ import unicode_literals
+
+import os
+import subprocess
+import select
+import sys
+import time
+
+DEFAULT_TIMEOUT = 10 #sec
+
+# Note: Python 3.0 supports communicate() with a timeout option.
+# If we upgrade to this version we will no longer need timed_communicate
+
+class TimeoutError(Exception):
+    def __init__(self, output, error):
+        super(TimeoutError, self).__init__('process timed out')
+        self.output = output
+        self.error = error
+
+class WaitTimeoutError(Exception):
+    pass
+
+def kill_process(proc):
+    proc.terminate()
+    try:
+        timed_wait(proc, 0.1)
+    except WaitTimeoutError:
+        proc.kill()
+        try:
+            timed_wait(proc, 0.1)
+        except WaitTimeoutError:
+            # This can happen if the process is stuck waiting inside a system
+            # call for a long time.  There isn't much we can do unless we want
+            # to keep waiting forever.  Just give up.  The child process will
+            # remain around as a zombie until we exit.
+            pass
+
+def timed_wait(proc, timeout):
+    # There unfortunately isn't a great way to wait for a process with a
+    # timeout, other than polling.  (Registering for SIGCHLD and sleeping might
+    # be one option, but that's fragile and not thread-safe.)
+    poll_interval = 0.1
+    end_time = time.time() + timeout
+    while True:
+        if proc.poll() is not None:
+            return
+        time_left = max(end_time - time.time(), 0)
+        if time_left <= 0:
+            raise WaitTimeoutError()
+        time.sleep(min(time_left, poll_interval))
+
+def timed_communicate(proc, timeout=DEFAULT_TIMEOUT):
+    end_time = time.time() + timeout
+
+    p = select.poll()
+    outfd = proc.stdout.fileno()
+    errfd = proc.stderr.fileno()
+    p.register(outfd, select.POLLIN)
+    p.register(errfd, select.POLLIN)
+    results = {outfd: [], errfd: []}
+    remaining_fds = set([outfd, errfd])
+
+    bufsize = 4096
+    while remaining_fds:
+        time_left = max(end_time - time.time(), 0)
+        r = p.poll(time_left * 1000)  # poll() takes timeout in milliseconds
+        if not r:
+            kill_process(proc)
+            raise TimeoutError(b''.join(results[outfd]),
+                               b''.join(results[errfd]))
+        for fd, flags in r:
+            # We didn't put the fds in non-blocking mode, but we know the fd
+            # has data to read, so os.read() will return immediately.
+            d = os.read(fd, bufsize)
+            if d:
+                results[fd].append(d)
+            else:
+                # EOF on this fd, stop listening on it
+                p.unregister(fd)
+                remaining_fds.remove(fd)
+
+    try:
+        timed_wait(proc, max(end_time - time.time(), 0))
+    except WaitTimeoutError:
+        kill_process(proc)
+        raise TimeoutError(b''.join(results[outfd]),
+                           b''.join(results[errfd]))
+
+    return b''.join(results[outfd]), b''.join(results[errfd])
diff --git a/meta-raptor/meta-asus/recipes-asus/rest-api/files/rest.py b/meta-raptor/meta-asus/recipes-asus/rest-api/files/rest.py
new file mode 100644
index 0000000..876f03a
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/rest-api/files/rest.py
@@ -0,0 +1,208 @@
+#!/usr/bin/env python
+#
+# Copyright 2017 Raptor Engineering, LLC
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+from ctypes import *
+import bottle
+from cherrypy.wsgiserver import CherryPyWSGIServer
+from cherrypy.wsgiserver.ssl_pyopenssl import pyOpenSSLAdapter
+import datetime
+import logging
+import logging.config
+import json
+import ssl
+import socket
+import os
+import rest_fruid
+import rest_server
+import rest_sensors
+import rest_bmc
+import rest_gpios
+import rest_slotid
+
+CONSTANTS = {
+    'certificate': '/usr/lib/ssl/certs/rest_server.pem',
+    'key': '/usr/lib/ssl/private/rest_server_key.pem',
+    'listen_address': '0.0.0.0',
+}
+
+LOGGER_CONF = {
+    'version': 1,
+    'disable_existing_loggers': False,
+    'formatters': {
+        'default': {
+            'format': '%(message)s'
+        },
+    },
+    'handlers': {
+        'file_handler': {
+            'level': 'INFO',
+            'formatter':'default',
+            'class': 'logging.handlers.RotatingFileHandler',
+            'filename':'/tmp/rest.log',
+            'maxBytes': 1048576,
+            'backupCount': 3,
+            'encoding': 'utf8'
+        },
+    },
+    'loggers': {
+        '': {
+            'handlers': ['file_handler'],
+            'level': 'DEBUG',
+            'propagate': True,
+        },
+    }
+}
+
+# Handler for root resource endpoint
+@bottle.route('/api')
+def rest_api():
+   result = {
+                "Information": {
+                    "Description": "Wedge RESTful API Entry",
+                    },
+                "Actions": [],
+                "Resources": [ "sys"],
+             }
+
+   return result
+
+# Handler for sys resource endpoint
+@bottle.route('/api/sys')
+def rest_sys():
+    result = {
+                "Information": {
+                    "Description": "System",
+                    },
+                "Actions": [],
+                "Resources": [ "mb", "bmc", "server", "sensors", "gpios",
+                               "slotid"],
+             }
+
+    return result
+
+# Handler for sys/mb resource endpoint
+@bottle.route('/api/sys/mb')
+def rest_sys():
+    result = {
+                "Information": {
+                    "Description": "Mainboard",
+                    },
+                "Actions": [],
+                "Resources": [ "fruid"],
+             }
+
+    return result
+
+# Handler for sys/mb/fruid resource endpoint
+@bottle.route('/api/sys/mb/fruid')
+def rest_fruid_hdl():
+  return rest_fruid.get_fruid()
+
+# Handler for sys/bmc resource endpoint
+@bottle.route('/api/sys/bmc')
+def rest_bmc_hdl():
+    return rest_bmc.get_bmc()
+
+# Handler for sys/server resource endpoint
+@bottle.route('/api/sys/server')
+def rest_server_hdl():
+    return rest_server.get_server()
+
+# Handler for uServer resource endpoint
+@bottle.route('/api/sys/server', method='POST')
+def rest_server_act_hdl():
+    data = json.load(request.body)
+    return rest_server.server_action(data)
+
+# Handler for sensors resource endpoint
+@bottle.route('/api/sys/sensors')
+def rest_sensors_hdl():
+  return rest_sensors.get_sensors()
+
+# Handler for sensors resource endpoint
+@bottle.route('/api/sys/gpios')
+def rest_gpios_hdl():
+  return rest_gpios.get_gpios()
+
+# Handler for sensors resource endpoint
+@bottle.route('/api/sys/slotid')
+def rest_slotid_hdl():
+  return rest_slotid.get_slotid()
+
+# SSL Wrapper for Rest API
+class SSLCherryPyServer(bottle.ServerAdapter):
+    def run(self, handler):
+        server = CherryPyWSGIServer((self.host, self.port), handler)
+        server.ssl_adapter = pyOpenSSLAdapter(CONSTANTS['certificate'], CONSTANTS['key'])
+        try:
+            server.start()
+        finally:
+            server.stop()
+
+
+def log_after_request():
+    try:
+        length = bottle.response.content_length
+    except:
+        try:
+            length = len(bottle.response.body)
+        except:
+            length = 0
+
+    logging.info('{} - - [{}] "{} {} {}" {} {}'.format(
+                  bottle.request.environ.get('REMOTE_ADDR'),
+                  datetime.datetime.now().strftime('%d/%b/%Y %H:%M:%S'),
+                  bottle.request.environ.get('REQUEST_METHOD'),
+                  bottle.request.environ.get('REQUEST_URI'),
+                  bottle.request.environ.get('SERVER_PROTOCOL'),
+                  bottle.response.status_code,
+                  length))
+
+
+# Error logging to log file
+class ErrorLogging(object):
+    def write(self, err):
+        logging.error(err)
+
+
+# Middleware to log the requests
+class LogMiddleware(object):
+    def __init__(self, app):
+        self.app = app
+
+    def __call__(self, e, h):
+        e['wsgi.errors'] = ErrorLogging()
+        ret_val = self.app(e, h)
+        log_after_request()
+        return ret_val
+
+# overwrite the stderr and stdout to log to the file
+bottle._stderr = logging.error
+bottle._stdout = logging.info
+logging.config.dictConfig(LOGGER_CONF)
+
+bottle_app = LogMiddleware(bottle.app())
+# Use SSL if the certificate and key exists. Otherwise, run without SSL.
+if (os.access(CONSTANTS['key'], os.R_OK) and
+    os.access(CONSTANTS['certificate'], os.R_OK)):
+    bottle.run(host = CONSTANTS['listen_address'], port = 8443, server=SSLCherryPyServer, app=bottle_app)
+else:
+    bottle.run(host = CONSTANTS['listen_address'], port = 8080, server='cherrypy', app=bottle_app)
diff --git a/meta-raptor/meta-asus/recipes-asus/rest-api/files/rest_bmc.py b/meta-raptor/meta-asus/recipes-asus/rest-api/files/rest_bmc.py
new file mode 100644
index 0000000..fe838b6
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/rest-api/files/rest_bmc.py
@@ -0,0 +1,78 @@
+#!/usr/bin/env python
+#
+# Copyright 2017 Raptor Engineering, LLC
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+
+from subprocess import *
+import re
+
+# Handler for FRUID resource endpoint
+def get_bmc():
+    # Get BMC Reset Reason
+    wdt_counter = Popen('devmem 0x1e785010', \
+                        shell=True, stdout=PIPE).stdout.read()
+    wdt_counter = int(wdt_counter, 0)
+
+    wdt_counter &= 0xff00
+
+    if wdt_counter:
+        por_flag = 0
+    else:
+        por_flag = 1
+
+    if por_flag:
+        reset_reason = "Power ON Reset"
+    else:
+        reset_reason = "User Initiated Reset or WDT Reset"
+
+    # Get BMC's Up Time
+    uptime = Popen('uptime', \
+                        shell=True, stdout=PIPE).stdout.read()
+
+    # Get Usage information
+    data = Popen('top -b n1', \
+                        shell=True, stdout=PIPE).stdout.read()
+    adata = data.split('\n')
+    mem_usage = adata[0]
+    cpu_usage = adata[1]
+
+    # Get OpenBMC version
+    version = ""
+    data = Popen('cat /etc/issue', \
+                        shell=True, stdout=PIPE).stdout.read()
+    ver = re.search(r'v([\w\d._-]*)\s', data)
+    if ver:
+        version = ver.group(1)
+
+    result = {
+                "Information": {
+                    "Description": "ASUS ASMB4iKVM BMC",
+                    "Reset Reason": reset_reason,
+                    "Uptime": uptime,
+                    "Memory Usage": mem_usage,
+                    "CPU Usage": cpu_usage,
+                    "OpenBMC Version": version,
+                },
+                "Actions": [],
+                "Resources": [],
+             }
+
+    return result;
+
diff --git a/meta-raptor/meta-asus/recipes-asus/rest-api/files/rest_fruid.py b/meta-raptor/meta-asus/recipes-asus/rest-api/files/rest_fruid.py
new file mode 100644
index 0000000..245afc4
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/rest-api/files/rest_fruid.py
@@ -0,0 +1,53 @@
+#!/usr/bin/env python
+#
+# Copyright 2017 Raptor Engineering, LLC
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+import subprocess
+
+def get_fruid():
+
+    mac2str = lambda mac: ':'.join(['{:02X}'.format(b) for b in mac])
+
+    fruinfo = { "Version": subprocess.Popen(['fw_printenv', 'fru_version'], stdout=subprocess.PIPE).communicate()[0],
+                "Product Name": subprocess.Popen(['fw_printenv', 'fru_product'], stdout=subprocess.PIPE).communicate()[0],
+                "Product Part Number": subprocess.Popen(['fw_printenv', 'fru_product_pn'], stdout=subprocess.PIPE).communicate()[0],
+                "System Assembly Part Number": subprocess.Popen(['fw_printenv', 'fru_subassembly'], stdout=subprocess.PIPE).communicate()[0],
+                "ODM PCB Part Number": subprocess.Popen(['fw_printenv', 'fru_odm_pn'], stdout=subprocess.PIPE).communicate()[0],
+                "ODM PCB Serial Number": subprocess.Popen(['fw_printenv', 'fru_odm_serial'], stdout=subprocess.PIPE).communicate()[0],
+                "Product Production State": subprocess.Popen(['fw_printenv', 'fru_prod_stat'], stdout=subprocess.PIPE).communicate()[0],
+                "Product Version": subprocess.Popen(['fw_printenv', 'fru_prod_major_version'], stdout=subprocess.PIPE).communicate()[0],
+                "Product Sub-Version": subprocess.Popen(['fw_printenv', 'fru_prod_minor_version'], stdout=subprocess.PIPE).communicate()[0],
+                "Product Serial Number": subprocess.Popen(['fw_printenv', 'fru_prod_serial'], stdout=subprocess.PIPE).communicate()[0],
+                "Product Asset Tag": subprocess.Popen(['fw_printenv', 'fru_asset_tag'], stdout=subprocess.PIPE).communicate()[0],
+                "System Manufacturer": subprocess.Popen(['fw_printenv', 'fru_prod_manufacturer'], stdout=subprocess.PIPE).communicate()[0],
+                "System Manufacturing Date": subprocess.Popen(['fw_printenv', 'fru_manufacturing_date'], stdout=subprocess.PIPE).communicate()[0],
+                "PCB Manufacturer": subprocess.Popen(['fw_printenv', 'fru_pcb_manufacturer'], stdout=subprocess.PIPE).communicate()[0],
+                "Assembled At": subprocess.Popen(['fw_printenv', 'fru_assembled_at'], stdout=subprocess.PIPE).communicate()[0],
+                "Local MAC": subprocess.Popen(['fw_printenv', 'ethaddr'], stdout=subprocess.PIPE).communicate()[0],
+                "Location": subprocess.Popen(['fw_printenv', 'fru_location'], stdout=subprocess.PIPE).communicate()[0]
+                }
+
+    result = {
+                "Information": fruinfo,
+                "Actions": [],
+                "Resources": [],
+             }
+
+    return result
diff --git a/meta-raptor/meta-asus/recipes-asus/rest-api/files/rest_gpios.py b/meta-raptor/meta-asus/recipes-asus/rest-api/files/rest_gpios.py
new file mode 100644
index 0000000..dcbb436
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/rest-api/files/rest_gpios.py
@@ -0,0 +1,47 @@
+#!/usr/bin/env python
+#
+# Copyright 2017 Raptor Engineering, LLC
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+from rest_fruid import get_fruid
+
+MAINBOARDS = ["KGPE-D16", "KCMA-D8"]
+
+
+def read_gpio_sysfs(gpio):
+    with open('/sys/class/gpio/gpio%d/value' % gpio, 'r') as f:
+        val_string = f.read()
+        if val_string == '1\n':
+            return 1
+        if val_string == '0\n':
+            return 0
+    return None
+
+
+def read_asus_gpio():
+    bhinfo = {}
+    return bhinfo
+
+
+def get_gpios():
+    fruinfo = get_fruid()
+    gpioinfo = {}
+    if fruinfo["Information"]["Product Name"] in MAINBOARDS:
+        gpioinfo["back_ports"] = read_asus_gpio()
+    return gpioinfo
diff --git a/meta-raptor/meta-asus/recipes-asus/rest-api/files/rest_sensors.py b/meta-raptor/meta-asus/recipes-asus/rest-api/files/rest_sensors.py
new file mode 100644
index 0000000..01e8f89
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/rest-api/files/rest_sensors.py
@@ -0,0 +1,59 @@
+#!/usr/bin/env python
+#
+# Copyright 2017 Raptor Engineering, LLC
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+import json
+import re
+import subprocess
+import bmc_command
+
+# Handler for sensors resource endpoint
+def get_sensors():
+    result = []
+    proc = subprocess.Popen(['sensors'],
+                            stdout=subprocess.PIPE,
+                            stderr=subprocess.PIPE)
+    try:
+        data, err = bmc_command.timed_communicate(proc)
+    except bmc_command.TimeoutError as ex:
+        data = ex.output
+        err = ex.error
+
+    data = re.sub(r'\(.+?\)', '', data)
+    data = re.sub(r'  sensor = .*', '', data)
+    for edata in data.split('\n\n'):
+        adata = edata.split('\n', 1)
+        sresult = {}
+        if (len(adata) < 2):
+            break;
+        sresult['name'] = adata[0]
+        for sdata in adata[1].split('\n'):
+            tdata = sdata.split(':')
+            if (len(tdata) < 2):
+                continue
+            sresult[tdata[0].strip()] = tdata[1].strip()
+        result.append(sresult)
+
+    fresult = {
+                "Information": result,
+                "Actions": [],
+                "Resources": [],
+              }
+    return fresult
diff --git a/meta-raptor/meta-asus/recipes-asus/rest-api/files/rest_server.py b/meta-raptor/meta-asus/recipes-asus/rest-api/files/rest_server.py
new file mode 100644
index 0000000..7a334a6
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/rest-api/files/rest_server.py
@@ -0,0 +1,69 @@
+#!/usr/bin/env python
+#
+# Copyright 2017 Raptor Engineering, LLC
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+
+import os
+from subprocess import *
+
+# Handler for mainboard resource endpoint
+def get_server():
+    ret = Popen('/usr/local/bin/asus_power.sh status', \
+            shell=True, stdout=PIPE).stdout.read()
+    status = ret.rsplit()[-1]
+
+    result = {
+                "Information": { "status": status },
+                "Actions": ["power-on", "power-off", "power-reset"],
+                "Resources": [],
+             }
+
+    return result
+
+def server_action(data):
+    if data["action"] == 'power-on':
+        ret = Popen('/usr/local/bin/asus_power.sh status', \
+			        shell=True, stdout=PIPE).stdout.read()
+        status = ret.rsplit()[-1]
+        if status == 'on':
+            res = 'failure'
+            reason = 'already on'
+        else:
+            ret = Popen('/usr/local/bin/asus_power.sh on', \
+			            shell=True, stdout=PIPE).stdout.read()
+            res = "success"
+    elif data["action"] == 'power-off':
+        ret = Popen('/usr/local/bin/asus_power.sh off', \
+			        shell=True, stdout=PIPE).stdout.read()
+        res = "success"
+    elif data["action"] == 'power-reset':
+        ret = Popen('/usr/local/bin/asus_power.sh reset', \
+			        shell=True, stdout=PIPE).stdout.read()
+        res = "success"
+    else:
+        res = 'failure'
+        reason = 'invalid action'
+
+    if res == 'failure':
+        result = { "result": res, "reason": reason}
+    else:
+        result = { "result": res }
+
+    return result
diff --git a/meta-raptor/meta-asus/recipes-asus/rest-api/files/rest_slotid.py b/meta-raptor/meta-asus/recipes-asus/rest-api/files/rest_slotid.py
new file mode 100644
index 0000000..1b03b91
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/rest-api/files/rest_slotid.py
@@ -0,0 +1,34 @@
+#!/usr/bin/env python
+#
+# Copyright 2017 Raptor Engineering, LLC
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+import subprocess
+
+# Handler for sensors resource endpoint
+def get_slotid():
+    p = subprocess.Popen('source /usr/local/bin/openbmc-utils.sh;'
+                         'asus_slot_id $(asus_board_type)',
+                         shell=True, stdout=subprocess.PIPE)
+    out, err = p.communicate()
+    try:
+        slot = int(out.strip('\n'))
+    except:
+        slot = 0
+    return { 'slotid' : slot }
diff --git a/meta-raptor/meta-asus/recipes-asus/rest-api/files/setup-rest-api.sh b/meta-raptor/meta-asus/recipes-asus/rest-api/files/setup-rest-api.sh
new file mode 100644
index 0000000..2b274dc
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/rest-api/files/setup-rest-api.sh
@@ -0,0 +1,79 @@
+#!/bin/sh
+#
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+### BEGIN INIT INFO
+# Provides:          setup-rest-api
+# Required-Start:
+# Required-Stop:
+# Default-Start:     S
+# Default-Stop:
+# Short-Description: Set REST API handler
+### END INIT INFO
+
+# source function library
+. /etc/init.d/functions
+
+ACTION="$1"
+CMD="/usr/local/bin/rest.py"
+case "$ACTION" in
+  start)
+    echo -n "Setting up REST API handler: "
+    pid=$(ps | grep -v grep | grep $CMD | awk '{print $1}')
+    if [ $pid ]; then
+      echo "already running"
+    else
+      $CMD > /tmp/rest_start.log 2>&1 &
+      echo "done."
+    fi
+    ;;
+  stop)
+    echo -n "Stopping REST API handler: "
+    pid=$(ps | grep -v grep | grep $CMD | awk '{print $1}')
+    if [ $pid ]; then
+      kill $pid
+    fi
+    echo "done."
+    ;;
+  restart)
+    echo -n "Restarting REST API handler: "
+    pid=$(ps | grep -v grep | grep $CMD | awk '{print $1}')
+    if [ $pid ]; then
+      kill $pid
+    fi
+    sleep 1
+    $CMD > /tmp/rest_start.log 2>&1 &
+    echo "done."
+    ;;
+  status)
+    if [[ -n $(ps | grep -v grep | grep $CMD | awk '{print $1}') ]]; then
+      echo "REST API handler is running"
+    else
+      echo "REST API is stopped"
+    fi
+    ;;
+  *)
+    N=${0##*/}
+    N=${N#[SK]??}
+    echo "Usage: $N {start|stop|status|restart}" >&2
+    exit 1
+    ;;
+esac
+
+exit 0
diff --git a/meta-raptor/meta-asus/recipes-asus/rest-api/rest-api_0.1.bb b/meta-raptor/meta-asus/recipes-asus/rest-api/rest-api_0.1.bb
new file mode 100644
index 0000000..53675b7
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/rest-api/rest-api_0.1.bb
@@ -0,0 +1,70 @@
+# Copyright 2017 Raptor Engineering, LLC
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+SUMMARY = "Rest API Daemon"
+DESCRIPTION = "Daemon to handle RESTful interface."
+SECTION = "base"
+PR = "r1"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://rest.py;beginline=6;endline=19;md5=0b1ee7d6f844d472fa306b2fee2167e0"
+
+
+DEPENDS_append = " update-rc.d-native"
+
+SRC_URI = "file://setup-rest-api.sh \
+           file://rest.py \
+           file://rest_bmc.py \
+           file://rest_fruid.py \
+           file://rest_gpios.py \
+           file://rest_server.py \
+           file://rest_sensors.py \
+           file://rest_slotid.py \
+           file://bmc_command.py \
+          "
+
+S = "${WORKDIR}"
+
+binfiles = "rest.py rest_bmc.py rest_fruid.py rest_gpios.py rest_server.py rest_sensors.py bmc_command.py rest_slotid.py setup-rest-api.sh"
+
+pkgdir = "rest-api"
+
+do_install() {
+  dst="${D}/usr/local/fbpackages/${pkgdir}"
+  bin="${D}/usr/local/bin"
+  install -d $dst
+  install -d $bin
+  for f in ${binfiles}; do
+    install -m 755 $f ${dst}/$f
+    ln -snf ../fbpackages/${pkgdir}/$f ${bin}/$f
+  done
+  for f in ${otherfiles}; do
+    install -m 644 $f ${dst}/$f
+  done
+  install -d ${D}${sysconfdir}/init.d
+  install -d ${D}${sysconfdir}/rcS.d
+  install -m 755 setup-rest-api.sh ${D}${sysconfdir}/init.d/setup-rest-api.sh
+  update-rc.d -r ${D} setup-rest-api.sh start 95 2 3 4 5  .
+}
+
+FBPACKAGEDIR = "${prefix}/local/fbpackages"
+
+FILES_${PN} = "${FBPACKAGEDIR}/rest-api ${prefix}/local/bin ${sysconfdir} "
+
+# Inhibit complaints about .debug directories for the fand binary:
+
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
+INHIBIT_PACKAGE_STRIP = "1"
diff --git a/meta-raptor/meta-asus/recipes-asus/sensor-setup/files/sensor-setup.sh b/meta-raptor/meta-asus/recipes-asus/sensor-setup/files/sensor-setup.sh
new file mode 100644
index 0000000..7f02cd5
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/sensor-setup/files/sensor-setup.sh
@@ -0,0 +1,35 @@
+#!/bin/sh
+#
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+### BEGIN INIT INFO
+# Provides:          sensor-setup
+# Required-Start:    power-on
+# Required-Stop:
+# Default-Start:     S
+# Default-Stop:
+# Short-Description: Power on micro-server
+### END INIT INFO
+
+# Eventually, this will be used to configure the various (mostly
+# i2c-based) sensors, once we have a kernel version that supports
+# doing this more dynamically.
+
+modprobe pmbus
+modprobe w83795 force=1,0x2f
diff --git a/meta-raptor/meta-asus/recipes-asus/sensor-setup/sensor-setup_0.1.bb b/meta-raptor/meta-asus/recipes-asus/sensor-setup/sensor-setup_0.1.bb
new file mode 100644
index 0000000..1b0f937
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/sensor-setup/sensor-setup_0.1.bb
@@ -0,0 +1,38 @@
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+SUMMARY = "Configure the sensors"
+DESCRIPTION = "The script configure sensors"
+SECTION = "base"
+PR = "r1"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://sensor-setup.sh;beginline=5;endline=18;md5=0b1ee7d6f844d472fa306b2fee2167e0"
+
+DEPENDS_append = " update-rc.d-native"
+
+SRC_URI = "file://sensor-setup.sh \
+          "
+
+S = "${WORKDIR}"
+
+do_install() {
+  install -d ${D}${sysconfdir}/init.d
+  install -d ${D}${sysconfdir}/rcS.d
+  install -m 755 sensor-setup.sh ${D}${sysconfdir}/init.d/sensor-setup.sh
+  update-rc.d -r ${D} sensor-setup.sh start 90 S .
+}
+
+FILES_${PN} = " ${sysconfdir} "
diff --git a/meta-raptor/meta-asus/recipes-asus/sms-kcsd/sms-kcsd/Makefile b/meta-raptor/meta-asus/recipes-asus/sms-kcsd/sms-kcsd/Makefile
new file mode 100644
index 0000000..dba9dbb
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/sms-kcsd/sms-kcsd/Makefile
@@ -0,0 +1,26 @@
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+
+all: sms-kcsd
+
+sms-kcsd: sms-kcsd.c 
+	$(CC) -pthread -lalert_control -lipmi -std=c99 -o $@ $^ $(LDFLAGS)
+
+.PHONY: clean
+
+clean:
+	rm -rf *.o sms-kcsd
diff --git a/meta-raptor/meta-asus/recipes-asus/sms-kcsd/sms-kcsd/setup-sms-kcs.sh b/meta-raptor/meta-asus/recipes-asus/sms-kcsd/sms-kcsd/setup-sms-kcs.sh
new file mode 100644
index 0000000..b4234a4
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/sms-kcsd/sms-kcsd/setup-sms-kcs.sh
@@ -0,0 +1,32 @@
+#!/bin/sh
+#
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+### BEGIN INIT INFO
+# Provides:          setup-sms-kcs
+# Required-Start:
+# Required-Stop:
+# Default-Start:     S
+# Default-Stop:
+# Short-Description: Set SMS KCS handler
+### END INIT INFO
+
+echo -n "Setup SMS KCS message handler... "
+/usr/local/bin/sms-kcsd
+echo "done."
diff --git a/meta-raptor/meta-asus/recipes-asus/sms-kcsd/sms-kcsd/sms-kcsd.c b/meta-raptor/meta-asus/recipes-asus/sms-kcsd/sms-kcsd/sms-kcsd.c
new file mode 100644
index 0000000..b3f65fa
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/sms-kcsd/sms-kcsd/sms-kcsd.c
@@ -0,0 +1,133 @@
+/*
+ * sms-kcsd
+ *
+ * Copyright 2017 Raptor Engineering, LLC
+ * Copyright 2014-present Facebook. All Rights Reserved.
+ *
+ * Daemon to monitor traffic coming from sms-kcs interface
+ * and respond to the command using IPMI stack
+ *
+ * TODO:  Determine if the daemon is already started.
+ * TODO:  Cache the file descriptors instead of open/close everytime
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <errno.h>
+#include <syslog.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <facebook/alert_control.h>
+#include <facebook/ipmi.h>
+
+#define PATH_SMS_KCS "/dev/kcs"
+#define MAX_ALERT_CONTROL_RETRIES 3
+
+typedef enum
+{
+        SET_SMS_BIT,
+        CLEAR_SMS_BIT,
+        ENABLE_KCS_INTERRUPT,
+        DISABLE_KCS_INTERRUPT,
+        START_HW_UNIT_TEST,
+        READ_KCS_DATA,
+        WRITE_KCS_DATA,
+        SET_OBF_BIT,
+        KCS_ENABLE,
+        KCS_DISABLE,
+        SET_STATUS_DATA,
+        END_OF_FUNCLIST,
+} kcs_io_controls;
+
+struct kcs_data_t {
+	unsigned char channel_num;
+	unsigned int num_bytes;
+	unsigned char * buffer;
+};
+
+typedef struct {
+  unsigned char fbid;
+  unsigned char length;
+  unsigned char buf[];
+} kcs_msg_t;
+
+/*
+ * Daemon Main loop
+ *  - Reads the incoming request on KCS channel
+ *  - Invokes IPMI handler to provide response
+ *  - Writes reply back to KCS channel
+ */
+int main(int argc, char **argv) {
+	int i = 0;
+	int count = 0;
+	int ret;
+	int fd_rd;
+	int fd_wr;
+	FILE *fp_kcs;
+	kcs_msg_t *msg;
+	unsigned char rbuf[256] = {0};
+	unsigned char tbuf[256] = {0};
+	unsigned char tlen = 0;
+
+	daemon(1, 0);
+	openlog("sms-kcs", LOG_CONS, LOG_DAEMON);
+
+	while (1) {
+		// Open control file
+		fp_kcs = fopen(PATH_SMS_KCS, "r+");
+		if (!fp_kcs) {
+			syslog(LOG_ALERT, "failed to open file %s\n", PATH_SMS_KCS);
+			return -1;
+		}
+		fd_rd = fileno(fp_kcs);
+		fd_wr = fileno(fp_kcs);
+
+		// Forever loop to poll and process KCS messages
+		while (1) {
+			// Reads incoming request
+			count = read(fd_rd, rbuf+2, sizeof(rbuf-2));
+			if (count == 0) {
+				syslog(LOG_INFO, "read returns zero bytes\n");
+				fclose(fp_kcs);
+				break;
+			}
+
+			// Set payload ID to 0
+			rbuf[0] = 0;
+			// Set length to the number of received bytes
+			rbuf[1] = count;
+
+			msg = (kcs_msg_t*)rbuf;
+
+			// Invoke IPMI handler
+			ipmi_handle(msg->buf, msg->length, tbuf, &tlen);
+
+			// Write Reply back to KCS channel
+			count = write(fd_wr, tbuf, tlen);
+			if (count != tlen) {
+				syslog(LOG_ALERT, "write returns: %d, expected: %d\n", count, tlen);
+				fclose(fp_kcs);
+				break;
+			}
+
+			// Rate limit
+			usleep(10000);
+		}
+	}
+}
diff --git a/meta-raptor/meta-asus/recipes-asus/sms-kcsd/sms-kcsd_0.1.bb b/meta-raptor/meta-asus/recipes-asus/sms-kcsd/sms-kcsd_0.1.bb
new file mode 100644
index 0000000..dda7c33
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/sms-kcsd/sms-kcsd_0.1.bb
@@ -0,0 +1,61 @@
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+SUMMARY = "SMS KCS Daemon"
+DESCRIPTION = "Daemon to handle SMS KCS interface."
+SECTION = "base"
+PR = "r1"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://sms-kcsd.c;beginline=13;endline=25;md5=da35978751a9d71b73679307c4d296ec"
+
+
+DEPENDS_append = " update-rc.d-native"
+
+DEPENDS += "libalert-control"
+DEPENDS += "libipmi"
+
+SRC_URI = "file://Makefile \
+           file://setup-sms-kcs.sh \
+           file://sms-kcsd.c \
+          "
+
+S = "${WORKDIR}"
+
+binfiles = "sms-kcsd"
+
+pkgdir = "sms-kcsd"
+
+do_install() {
+  dst="${D}/usr/local/fbpackages/${pkgdir}"
+  bin="${D}/usr/local/bin"
+  install -d $dst
+  install -d $bin
+  install -m 755 sms-kcsd ${dst}/sms-kcsd
+  ln -snf ../fbpackages/${pkgdir}/sms-kcsd ${bin}/sms-kcsd
+  install -d ${D}${sysconfdir}/init.d
+  install -d ${D}${sysconfdir}/rcS.d
+  install -m 755 setup-sms-kcs.sh ${D}${sysconfdir}/init.d/setup-sms-kcs.sh
+  update-rc.d -r ${D} setup-sms-kcs.sh start 65 S .
+}
+
+FBPACKAGEDIR = "${prefix}/local/fbpackages"
+
+FILES_${PN} = "${FBPACKAGEDIR}/sms-kcsd ${prefix}/local/bin ${sysconfdir} "
+
+# Inhibit complaints about .debug directories for the fand binary:
+
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
+INHIBIT_PACKAGE_STRIP = "1"
diff --git a/meta-raptor/meta-asus/recipes-asus/usb-console/files/usbcons.sh b/meta-raptor/meta-asus/recipes-asus/usb-console/files/usbcons.sh
new file mode 100755
index 0000000..de284bb
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/usb-console/files/usbcons.sh
@@ -0,0 +1,80 @@
+#! /bin/sh
+#
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+### BEGIN INIT INFO
+# Provides:          usbcons
+# Required-Start:
+# Required-Stop:
+# Default-Start:     S
+# Default-Stop:      0 6
+# Short-Description: Creates a virtual USB serial device and starts a console
+#                    on it.
+#
+### END INIT INFO
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin
+NAME=usbcons
+PIDFILE=/run/usbcons.pid
+DESC="USB Serial Console"
+
+# source function library
+. /etc/init.d/functions
+
+STOPPER=
+ACTION="$1"
+
+case "$ACTION" in
+  start)
+    # Ability to prevent this from starting by editing cmdline in u-boot.
+    # Keeping this here until I get gadget switching working properly. (t4906522)
+    if grep "nousbcons" /proc/cmdline > /dev/null 2>&1
+    then
+      echo "USB Console Disabled."
+      exit 0
+    fi
+    echo -n "Starting $DESC: "
+    /usr/local/bin/usbmon.sh > /dev/null 2>&1 &
+    echo "$NAME."
+    ;;
+  stop)
+    echo -n "Stopping $DESC: "
+    killall usbmon.sh
+    echo "$NAME."
+    ;;
+  restart|force-reload)
+    echo -n "Restarting $DESC: "
+    killall usbmon.sh
+    sleep 1
+    /usr/local/bin/usbmon.sh > /dev/null 2>&1 &
+    echo "$NAME."
+    ;;
+  status)
+    status $DAEMON
+    exit $?
+    ;;
+  *)
+    N=${0##*/}
+    N=${N#[SK]??}
+    echo "Usage: $N {start|stop|status|restart|force-reload}" >&2
+    exit 1
+    ;;
+esac
+
+exit 0
diff --git a/meta-raptor/meta-asus/recipes-asus/usb-console/files/usbmon.sh b/meta-raptor/meta-asus/recipes-asus/usb-console/files/usbmon.sh
new file mode 100755
index 0000000..2e1ee67
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/usb-console/files/usbmon.sh
@@ -0,0 +1,34 @@
+#!/bin/sh
+#
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+modprobe g_cdc host_addr=02:00:00:00:00:02 dev_addr=02:00:00:00:00:01
+# For g-ether interface, if the remote side brings down the interface, BMC side
+# still treats it as up. In this case, all packets through usb0 (i.e. NDP) will
+# be queued in the kernel for this interface. Ether interface has the default
+# TX queue length as 1000, which means there could be up to 1000 package queued
+# in kernel for that. In our case, kmalloc-192 is exhausted when 298 packets
+# are queued.
+# To solve this issue, we change the TX queue length for usb0 to 64 to avoid
+# memory exhaust.
+ifconfig usb0 txqueuelen 64
+while true; do
+    getty /dev/ttyGS0 57600
+    sleep 1
+done
diff --git a/meta-raptor/meta-asus/recipes-asus/usb-console/usb-console_0.1.bb b/meta-raptor/meta-asus/recipes-asus/usb-console/usb-console_0.1.bb
new file mode 100644
index 0000000..c934f46
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-asus/usb-console/usb-console_0.1.bb
@@ -0,0 +1,42 @@
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+SUMMARY = "Set up a USB serial console"
+DESCRIPTION = "Sets up a USB serial console"
+SECTION = "base"
+PR = "r1"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://usbcons.sh;beginline=5;endline=18;md5=0b1ee7d6f844d472fa306b2fee2167e0"
+
+DEPENDS_append = " update-rc.d-native"
+
+SRC_URI = "file://usbcons.sh \
+           file://usbmon.sh \
+          "
+
+S = "${WORKDIR}"
+
+do_install() {
+  install -d ${D}${sysconfdir}/init.d
+  install -d ${D}${sysconfdir}/rcS.d
+  install -m 755 usbcons.sh ${D}${sysconfdir}/init.d/usbcons.sh
+  update-rc.d -r ${D} usbcons.sh start 90 S .
+  localbindir="${D}/usr/local/bin"
+  install -d ${localbindir}
+  install -m 755 usbmon.sh ${localbindir}/usbmon.sh
+}
+
+FILES_${PN} = " ${sysconfdir} /usr/local"
diff --git a/meta-raptor/meta-asus/recipes-core/base-files/base-files/fstab b/meta-raptor/meta-asus/recipes-core/base-files/base-files/fstab
new file mode 100644
index 0000000..42787f3
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-core/base-files/base-files/fstab
@@ -0,0 +1,7 @@
+/dev/root            /                    auto       defaults              1  1
+proc                 /proc                proc       defaults              0  0
+devpts               /dev/pts             devpts     mode=0620,gid=5       0  0
+usbdevfs             /proc/bus/usb        usbdevfs   noauto                0  0
+tmpfs                /run                 tmpfs      mode=0755,nodev,nosuid,strictatime 0  0
+tmpfs                /var/volatile        tmpfs      defaults              0  0
+tmpfs                /tmp                 tmpfs      defaults,size=8M      0  0
diff --git a/meta-raptor/meta-asus/recipes-core/base-files/base-files_3.0.14.bbappend b/meta-raptor/meta-asus/recipes-core/base-files/base-files_3.0.14.bbappend
new file mode 100644
index 0000000..72d991c
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-core/base-files/base-files_3.0.14.bbappend
@@ -0,0 +1 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
diff --git a/meta-raptor/meta-asus/recipes-core/busybox/busybox/busybox.cfg b/meta-raptor/meta-asus/recipes-core/busybox/busybox/busybox.cfg
new file mode 100644
index 0000000..66da117
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-core/busybox/busybox/busybox.cfg
@@ -0,0 +1,18 @@
+CONFIG_SH_MATH_SUPPORT_64=y
+CONFIG_DEVMEM=y
+CONFIG_LSUSB=y
+CONFIG_FEATURE_PS_ADDITIONAL_COLUMNS=y
+CONFIG_RX=y
+CONFIG_FLASHCP=y
+CONFIG_FLASH_LOCK=y
+CONFIG_FLASH_UNLOCK=y
+CONFIG_FLASH_ERASEALL=y
+CONFIG_TRACEROUTE6=y
+CONFIG_VCONFIG=y
+# we use the standalone ip util
+CONFIG_IP=n
+# use dhclient, as udhcpc will flush all v6 link local addresses during renew
+CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP=y
+CONFIG_UDHCPD=n
+CONFIG_UDHCPC=n
+CONFIG_UDHCPC6=n
diff --git a/meta-raptor/meta-asus/recipes-core/busybox/busybox/syslog-startup.conf b/meta-raptor/meta-asus/recipes-core/busybox/busybox/syslog-startup.conf
new file mode 100644
index 0000000..53d7297
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-core/busybox/busybox/syslog-startup.conf
@@ -0,0 +1,13 @@
+# This configuration file is used by the busybox syslog init script,
+# /etc/init.d/syslog[.busybox] to set syslog configuration at start time.
+
+DESTINATION=file		# log destinations (buffer file remote)
+LOGFILE=/var/log/messages	# where to log (file)
+REMOTE=loghost:514		# where to log (syslog remote)
+REDUCE=no			# reduce-size logging
+DROPDUPLICATES=no		# whether to drop duplicate log entries
+ROTATESIZE=128			# rotate log if grown beyond X [kByte]
+ROTATEGENS=1			# keep X generations of rotated logs
+BUFFERSIZE=64			# size of circular buffer [kByte]
+FOREGROUND=no			# run in foreground (don't use!)
+#LOGLEVEL=5			# local log level (between 1 and 8)
diff --git a/meta-raptor/meta-asus/recipes-core/busybox/busybox/syslog.conf b/meta-raptor/meta-asus/recipes-core/busybox/busybox/syslog.conf
new file mode 100644
index 0000000..817a9a9
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-core/busybox/busybox/syslog.conf
@@ -0,0 +1,5 @@
+#  /etc/syslog.conf     Configuration file for busybox's syslogd utility
+# Send emergency messages to the console
+*.emerg         /dev/console
+# Store everything else
+*.*             /var/log/messages
diff --git a/meta-raptor/meta-asus/recipes-core/busybox/busybox_%.bbappend b/meta-raptor/meta-asus/recipes-core/busybox/busybox_%.bbappend
new file mode 100644
index 0000000..501d2a1
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-core/busybox/busybox_%.bbappend
@@ -0,0 +1,7 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+
+SRC_URI += " \
+            file://busybox.cfg \
+            file://syslog.conf \
+            file://syslog-startup.conf \
+           "
diff --git a/meta-raptor/meta-asus/recipes-core/fan-ctrl/fan-ctrl/get_fan_speed.sh b/meta-raptor/meta-asus/recipes-core/fan-ctrl/fan-ctrl/get_fan_speed.sh
new file mode 100755
index 0000000..4955582
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-core/fan-ctrl/fan-ctrl/get_fan_speed.sh
@@ -0,0 +1,60 @@
+#!/bin/sh
+#
+# Copyright 2017 Raptor Engineering, LLC
+# Copyright 2015-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+usage() {
+    echo "Usage: $0 [Fan Unit (1..8)]" >&2
+}
+
+FAN_DIR=/sys/class/i2c-adapter/i2c-1/1-002f
+
+show_pwm()
+{
+    pwm="${FAN_DIR}/fantray${1}_pwm"
+    val=$(cat $pwm | head -n 1)
+    echo "$((val * 100 / 31))%"
+}
+
+show_rpm()
+{
+    front_rpm="${FAN_DIR}/fan$((($1 * 2 - 1)))_input"
+    rear_rpm="${FAN_DIR}/fan$((($1 * 2)))_input"
+    echo "$(cat $front_rpm), $(cat $rear_rpm)"
+}
+
+set -e
+
+# refer to the comments in init_pwn.sh regarding
+# the fan unit and tacho mapping
+if [ "$#" -eq 0 ]; then
+    FANS="1 2 3 4 5 6 7 8"
+elif [ "$#" -eq 1 ]; then
+    if [ $1 -gt 8 ]; then
+        usage
+        exit 1
+    fi
+    FANS="$1"
+else
+    usage
+    exit 1
+fi
+
+for fan in $FANS; do
+    echo "Fan $fan RPMs: $(show_rpm $fan), ($(show_pwm $fan))"
+done
diff --git a/meta-raptor/meta-asus/recipes-core/fan-ctrl/fan-ctrl/init_pwm.sh b/meta-raptor/meta-asus/recipes-core/fan-ctrl/fan-ctrl/init_pwm.sh
new file mode 100755
index 0000000..5804598
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-core/fan-ctrl/fan-ctrl/init_pwm.sh
@@ -0,0 +1,31 @@
+#!/bin/sh
+#
+# Copyright 2017 Raptor Engineering, LLC
+# Copyright 2004-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+PWM_DIR=/sys/class/i2c-adapter/i2c-1/1-002f
+
+set -e
+
+# On ASUS boards, there are up to 8 fans connected.
+# Each fan has one PWM input and 1 tachometer output.
+# For each fan, set the type, and set initial speed to 100%
+for pwm in 1 2 3 4 5 6 7 8; do
+    echo 1 > $PWM_DIR/pwm${pwm}_enable
+    echo 255 > $PWM_DIR/pwm${pwm}
+done
diff --git a/meta-raptor/meta-asus/recipes-core/fan-ctrl/fan-ctrl/set_fan_speed.sh b/meta-raptor/meta-asus/recipes-core/fan-ctrl/fan-ctrl/set_fan_speed.sh
new file mode 100755
index 0000000..99be901
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-core/fan-ctrl/fan-ctrl/set_fan_speed.sh
@@ -0,0 +1,47 @@
+#!/bin/sh
+#
+# Copyright 2017 Raptor Engineering, LLC
+# Copyright 2015-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+usage() {
+    echo "Usage: $0 <PERCENT (0..100)> <Fan Unit (1..8)> " >&2
+}
+
+FAN_DIR=/sys/class/i2c-adapter/i2c-1/1-002f
+
+set -e
+
+if [ "$#" -ne 2 ] && [ "$#" -ne 1 ]; then
+    usage
+    exit 1
+fi
+
+if [ "$#" -eq 1 ]; then
+    FANS="1 2 3 4 5 6 7 8"
+else
+    FANS="$2"
+fi
+
+# Convert the percentage to our 1/256th unit (0-255).
+unit=$(( ( $1 * 255 ) / 100 ))
+
+for fan in $FANS; do
+    pwm="${FAN_DIR}/pwm${fan}"
+    echo "$unit" > $pwm
+    echo "Successfully set fan ${fan} speed to $1%"
+done
diff --git a/meta-raptor/meta-asus/recipes-core/fan-ctrl/fan-ctrl/setup-fan.sh b/meta-raptor/meta-asus/recipes-core/fan-ctrl/fan-ctrl/setup-fan.sh
new file mode 100644
index 0000000..2b2e902
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-core/fan-ctrl/fan-ctrl/setup-fan.sh
@@ -0,0 +1,38 @@
+#!/bin/sh
+#
+# Copyright 2017 Raptor Engineering, LLC
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+### BEGIN INIT INFO
+# Provides:          setup-fan
+# Required-Start:    board-id
+# Required-Stop:
+# Default-Start:     S
+# Default-Stop:
+# Short-Description: Set fan speed
+### END INIT INFO
+
+echo -n "Setup fan speed... "
+rmmod w83795 || true
+/usr/local/bin/platform_sensor_init
+modprobe w83795 force_w83795=1,0x2f
+/usr/local/bin/init_pwm.sh
+/usr/local/bin/set_fan_speed.sh 50
+/usr/local/bin/fand
+echo "done."
diff --git a/meta-raptor/meta-asus/recipes-core/fan-ctrl/fan-ctrl_0.1.bbappend b/meta-raptor/meta-asus/recipes-core/fan-ctrl/fan-ctrl_0.1.bbappend
new file mode 100644
index 0000000..b6f0ae1
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-core/fan-ctrl/fan-ctrl_0.1.bbappend
@@ -0,0 +1,65 @@
+# Copyright 2017-present Raptor Engineering. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+
+DEPENDS_append = " update-rc.d-native"
+
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+SRC_URI += "file://get_fan_speed.sh \
+            file://set_fan_speed.sh \
+            file://init_pwm.sh \
+            file://setup-fan.sh \
+           "
+
+S = "${WORKDIR}"
+
+binfiles = "                                    \
+    get_fan_speed.sh                            \
+    set_fan_speed.sh                            \
+    init_pwm.sh					\
+    fand					\
+    platform_sensor_init			\
+    "
+
+CXXFLAGS_prepend = "-DCONFIG_ASUS "
+
+pkgdir = "fan_ctrl"
+
+do_install() {
+  dst="${D}/usr/local/fbpackages/${pkgdir}"
+  bin="${D}/usr/local/bin"
+  install -d $dst
+  install -d $bin
+  for f in ${binfiles}; do
+    install -m 755 $f ${bin}/$f
+  done
+  for f in ${otherfiles}; do
+    install -m 644 $f ${dst}/$f
+  done
+  install -d ${D}${sysconfdir}/init.d
+  install -d ${D}${sysconfdir}/rcS.d
+  install -m 755 setup-fan.sh ${D}${sysconfdir}/init.d/setup-fan.sh
+  update-rc.d -r ${D} setup-fan.sh start 91 S .
+}
+
+FBPACKAGEDIR = "${prefix}/local/fbpackages"
+
+FILES_${PN} = "${FBPACKAGEDIR}/fan_ctrl ${prefix}/local/bin ${sysconfdir} "
+
+# Inhibit complaints about .debug directories for the fand binary:
+
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
+INHIBIT_PACKAGE_STRIP = "1"
diff --git a/meta-raptor/meta-asus/recipes-core/images/asus-image.bb b/meta-raptor/meta-asus/recipes-core/images/asus-image.bb
new file mode 100644
index 0000000..b623f38
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-core/images/asus-image.bb
@@ -0,0 +1,106 @@
+inherit asus_uboot_image
+
+# /dev
+require recipes-core/images/aspeed-dev.inc
+
+# Base this image on core-image-minimal
+include recipes-core/images/core-image-minimal.bb
+
+# Changing the image compression from gz to lzma achieves 30% saving (~3M).
+# However, the current u-boot does not have lzma enabled. Stick to gz
+# until we generate a new u-boot image.
+IMAGE_FSTYPES += "squashfs"
+
+PYTHON_PKGS = " \
+  python-core \
+  python-io \
+  python-json \
+  python-shell \
+  python-subprocess \
+  python-argparse \
+  python-ctypes \
+  python-datetime \
+  python-email \
+  python-threading \
+  python-mime \
+  python-pickle \
+  python-misc \
+  python-netserver \
+  "
+
+NTP_PKGS = " \
+  ntp \
+  ntp-utils \
+  sntp \
+  ntpdate \
+  "
+
+# Include modules in rootfs
+IMAGE_INSTALL += " \
+  kernel-modules \
+  u-boot \
+  u-boot-fw-utils \
+  openbmc-utils \
+  openbmc-gpio \
+  fan-ctrl \
+  watchdog-ctrl \
+  i2c-tools \
+  sensor-setup \
+  lldp-util \
+  lmsensors-sensors \
+  sms-kcsd \
+  rest-api \
+  bottle \
+  ipmid \
+  po-eeprom \
+  bitbang \
+  ${PYTHON_PKGS} \
+  ${NTP_PKGS} \
+  iproute2 \
+  dhcp-client \
+  jbi \
+  flashrom \
+  cherryPy \
+  screen \
+  "
+
+IMAGE_FEATURES += " \
+  ssh-server-openssh \
+  "
+
+DISTRO_FEATURES += " \
+  ext2 \
+  nfs \
+  usbgadget \
+  "
+
+# IPv6 deactivated due to lack of memory.  If you need IPv6 please deactivate IPv4
+# DISTRO_FEATURES += " ipv6"
+disable_ipv6() {
+	rm -f ${IMAGE_ROOTFS}/etc/network/if-up.d/dhcpv6_*
+}
+ROOTFS_POSTPROCESS_COMMAND += "disable_ipv6;"
+
+# Flash space is limited and PIP will not be run
+# However, it does not appear there is a way to prevent ensurepip from being installed,
+# so simply delete it before the rootfs is packaged / compressed...
+# Same goes for the various Python module test suites...
+# ...and tutorial PDFs...
+remove_spurious_files() {
+	rm -rf ${IMAGE_ROOTFS}/usr/lib/python2.7/ensurepip
+	rm -rf ${IMAGE_ROOTFS}/usr/lib/python2.7/ctypes/test
+	rm -rf ${IMAGE_ROOTFS}/usr/lib/python2.7/email/test
+	rm -rf ${IMAGE_ROOTFS}/usr/lib/python2.7/json/tests
+	rm -rf ${IMAGE_ROOTFS}/usr/lib/python2.7/site-packages/cherrypy/test
+	rm -rf ${IMAGE_ROOTFS}/usr/share/cherrypy/tutorial/
+}
+
+ROOTFS_POSTPROCESS_COMMAND += "remove_spurious_files;"
+
+# Our root filesystem is read-only, so some directories need to be created before the
+# rootfs is flashed onto the system
+create_missing_directories() {
+	mkdir ${IMAGE_ROOTFS}/mnt/data
+}
+
+ROOTFS_POSTPROCESS_COMMAND += "create_missing_directories;"
diff --git a/meta-raptor/meta-asus/recipes-core/initscripts/initscripts/mountall.sh b/meta-raptor/meta-asus/recipes-core/initscripts/initscripts/mountall.sh
new file mode 100755
index 0000000..68c20ef
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-core/initscripts/initscripts/mountall.sh
@@ -0,0 +1,57 @@
+#!/bin/sh
+### BEGIN INIT INFO
+# Provides:          mountall
+# Required-Start:    mountvirtfs
+# Required-Stop: 
+# Default-Start:     S
+# Default-Stop:
+# Short-Description: Mount all filesystems.
+# Description:
+### END INIT INFO
+
+. /etc/default/rcS
+
+#
+# Mount local filesystems in /etc/fstab. For some reason, people
+# might want to mount "proc" several times, and mount -v complains
+# about this. So we mount "proc" filesystems without -v.
+#
+test "$VERBOSE" != no && echo "Mounting local filesystems..."
+mount -at nonfs,nosmbfs,noncpfs 2>/dev/null
+mount /tmp
+
+# Create unionfs
+
+mkdir /tmp/unionfs
+mkdir /tmp/unionfs/dev
+mkdir /tmp/unionfs/etc
+mkdir /tmp/unionfs/var
+mkdir /tmp/unionfs/media
+
+umount /dev/pts
+
+mount -t unionfs -o dirs=/tmp/unionfs/dev=rw:/dev=ro none /dev
+mount -t unionfs -o dirs=/tmp/unionfs/etc=rw:/etc=ro none /etc
+mount -t unionfs -o dirs=/tmp/unionfs/var=rw:/var=ro none /var
+mount -t unionfs -o dirs=/tmp/unionfs/media=rw:/media=ro none /media
+
+mount -t devpts devpts /dev/pts
+
+#
+# We might have mounted something over /dev, see if /dev/initctl is there.
+#
+if test ! -p /dev/initctl
+then
+	rm -f /dev/initctl
+	mknod -m 600 /dev/initctl p
+fi
+kill -USR1 1
+
+#
+# Execute swapon command again, in case we want to swap to
+# a file on a now mounted filesystem.
+#
+swapon -a 2> /dev/null
+
+: exit 0
+
diff --git a/meta-raptor/meta-asus/recipes-core/initscripts/initscripts_1.0.bbappend b/meta-raptor/meta-asus/recipes-core/initscripts/initscripts_1.0.bbappend
new file mode 100644
index 0000000..9652309
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-core/initscripts/initscripts_1.0.bbappend
@@ -0,0 +1 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
\ No newline at end of file
diff --git a/meta-raptor/meta-asus/recipes-core/sysvinit/sysvinit-inittab_%.bbappend b/meta-raptor/meta-asus/recipes-core/sysvinit/sysvinit-inittab_%.bbappend
new file mode 100644
index 0000000..7d17499
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-core/sysvinit/sysvinit-inittab_%.bbappend
@@ -0,0 +1,2 @@
+# ttyS1 is UART1, connected to on-board console debug port
+SERIAL_CONSOLES = "38400;ttyS1"
diff --git a/meta-raptor/meta-asus/recipes-extended/rsyslog/rsyslog/rsyslog.logrotate b/meta-raptor/meta-asus/recipes-extended/rsyslog/rsyslog/rsyslog.logrotate
new file mode 100644
index 0000000..b85cbcf
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-extended/rsyslog/rsyslog/rsyslog.logrotate
@@ -0,0 +1,39 @@
+# /etc/logrotate.d/rsyslog - Ported from Debian
+
+/var/log/syslog
+{
+        rotate 2
+        hourly
+        missingok
+        notifempty
+        delaycompress
+        compress
+        postrotate
+		/bin/kill -HUP `cat /var/run/rsyslogd.pid 2> /dev/null` 2> /dev/null || true
+        endscript
+}
+
+/var/log/mail.info
+/var/log/mail.warn
+/var/log/mail.err
+/var/log/mail.log
+/var/log/daemon.log
+/var/log/kern.log
+/var/log/auth.log
+/var/log/user.log
+/var/log/lpr.log
+/var/log/cron.log
+/var/log/debug
+/var/log/messages
+{
+        rotate 2
+        hourly
+        missingok
+        notifempty
+        compress
+        delaycompress
+        sharedscripts
+        postrotate
+		/bin/kill -HUP `cat /var/run/rsyslogd.pid 2> /dev/null` 2> /dev/null || true
+        endscript
+}
diff --git a/meta-raptor/meta-asus/recipes-extended/rsyslog/rsyslog_7.4.4.bbappend b/meta-raptor/meta-asus/recipes-extended/rsyslog/rsyslog_7.4.4.bbappend
new file mode 100644
index 0000000..72d991c
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-extended/rsyslog/rsyslog_7.4.4.bbappend
@@ -0,0 +1 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
diff --git a/meta-raptor/meta-asus/recipes-kernel/com-e-mod/files/COPYING b/meta-raptor/meta-asus/recipes-kernel/com-e-mod/files/COPYING
new file mode 100644
index 0000000..6d45519
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-kernel/com-e-mod/files/COPYING
@@ -0,0 +1,340 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+                       51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.
diff --git a/meta-raptor/meta-asus/recipes-kernel/com-e-mod/files/Makefile b/meta-raptor/meta-asus/recipes-kernel/com-e-mod/files/Makefile
new file mode 100644
index 0000000..d3b524e
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-kernel/com-e-mod/files/Makefile
@@ -0,0 +1,31 @@
+# Copyright 2015-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+
+obj-m := com_e_driver.o
+
+SRC := $(shell pwd)
+
+all:
+	$(MAKE) -C $(KERNEL_SRC) M=$(SRC)
+
+modules_install:
+	$(MAKE) -C $(KERNEL_SRC) M=$(SRC) modules_install
+
+clean:
+	rm -f *.o *~ core .depend .*.cmd *.ko *.mod.c
+	rm -f Module.markers Module.symvers modules.order
+	rm -rf .tmp_versions Modules.symvers
diff --git a/meta-raptor/meta-asus/recipes-kernel/com-e-mod/files/com_e_driver.c b/meta-raptor/meta-asus/recipes-kernel/com-e-mod/files/com_e_driver.c
new file mode 100644
index 0000000..0a3df37
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-kernel/com-e-mod/files/com_e_driver.c
@@ -0,0 +1,365 @@
+/*
+ * com_e_driver.c - The i2c driver for COMe
+ *
+ * Copyright 2015-present Facebook. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/i2c_dev_sysfs.h>
+
+#ifdef DEBUG
+
+#define PP_DEBUG(fmt, ...) do {                   \
+  printk(KERN_DEBUG "%s:%d " fmt "\n",            \
+         __FUNCTION__, __LINE__, ##__VA_ARGS__);  \
+} while (0)
+
+#else /* !DEBUG */
+
+#define PP_DEBUG(fmt, ...)
+
+#endif
+
+static ssize_t i2c_dev_show_mac(struct device *dev,
+                                struct device_attribute *attr,
+                                char *buf)
+{
+  uint8_t values[6];
+  int ret_val;
+
+  ret_val = i2c_dev_read_nbytes(dev, attr, values, 6);
+  if (ret_val < 0) {
+    return ret_val;
+  }
+  //values[] : mac address
+  return scnprintf(buf, PAGE_SIZE, "%02x:%02x:%02x:%02x:%02x:%02x\n", values[0],
+                   values[1], values[2], values[3], values[4], values[5]);
+}
+
+static ssize_t i2c_dev_show_date(struct device *dev,
+                                 struct device_attribute *attr,
+                                 char *buf)
+{
+  uint8_t values[3];
+  int ret_val;
+
+  ret_val = i2c_dev_read_nbytes(dev, attr, values, 3);
+  if (ret_val < 0) {
+    return ret_val;
+  }
+  //values[0] : year
+  //values[1] : month
+  //values[2] : day
+  return scnprintf(buf, PAGE_SIZE, "%x/%x/%x\n", values[1],
+                   values[2], values[0]);
+}
+
+static ssize_t i2c_dev_show_version(struct device *dev,
+                                    struct device_attribute *attr,
+                                    char *buf)
+{
+  uint8_t values[3];
+  int ret_val;
+
+  ret_val = i2c_dev_read_nbytes(dev, attr, values, 3);
+  if (ret_val < 0) {
+    return ret_val;
+  }
+  //values[0] : Version_R
+  //values[1] : Version_E
+  //values[2] : Version_T
+  return scnprintf(buf, PAGE_SIZE, "EC Version R=0x%02x E=0x%02x T=0x%2x\n",
+                   values[0], values[1], values[2]);
+
+}
+
+static ssize_t i2c_dev_show_cpu_temp(struct device *dev,
+                                     struct device_attribute *attr,
+                                     char *buf)
+{
+  int ret_val;
+
+  ret_val = i2c_dev_read_byte(dev, attr);
+  if (ret_val < 0) {
+    return ret_val;
+  }
+  return scnprintf(buf, PAGE_SIZE, "%u\n", ret_val);
+}
+
+static ssize_t i2c_dev_show_voltage0(struct device *dev,
+                                     struct device_attribute *attr,
+                                     char *buf)
+{
+  int result;
+
+  result = i2c_dev_read_word_littleendian(dev, attr);
+  if (result < 0) {
+    return result;
+  }
+  result = (result * 1000) / 341;
+  return scnprintf(buf, PAGE_SIZE, "%u\n", result);
+}
+
+static ssize_t i2c_dev_show_voltage1(struct device *dev,
+                                     struct device_attribute *attr,
+                                     char *buf)
+{
+  int result;
+
+  result = i2c_dev_read_word_littleendian(dev, attr);
+  if (result < 0) {
+    return result;
+  }
+  result = (result * 2000) / 341;
+  return scnprintf(buf, PAGE_SIZE, "%u\n", result);
+}
+
+static ssize_t i2c_dev_show_voltage2(struct device *dev,
+                                     struct device_attribute *attr,
+                                     char *buf)
+{
+  int result;
+
+  result = i2c_dev_read_word_littleendian(dev, attr);
+  if (result < 0) {
+    return result;
+  }
+  result = (result * 3200) / 341;
+  return scnprintf(buf, PAGE_SIZE, "%u\n", result);
+}
+
+static ssize_t i2c_dev_show_voltage3(struct device *dev,
+                                     struct device_attribute *attr,
+                                     char *buf)
+{
+  int result;
+
+  result = i2c_dev_read_word_littleendian(dev, attr);
+  if (result < 0) {
+    return result;
+  }
+  result = (result * 6600) / 341;
+  return scnprintf(buf, PAGE_SIZE, "%u\n", result);
+}
+
+static const i2c_dev_attr_st com_e_attr_table[] = {
+  {
+    "temp1_input", // cpu_temp
+    NULL,
+    i2c_dev_show_cpu_temp,
+    NULL,
+    0x0, 0, 8,
+  },
+  {
+    "version", // version_r,_e,_t
+    NULL,
+    i2c_dev_show_version,
+    NULL,
+    0x1D, 0, 24,
+  },
+  {
+    "in0_input", // CPU_vcore
+    NULL,
+    i2c_dev_show_voltage0,
+    NULL,
+    0x20, 0, 16,
+  },
+  {
+    "in1_input",// 3V
+    NULL,
+    i2c_dev_show_voltage1,
+    NULL,
+    0x22, 0, 16,
+  },
+  {
+    "in2_input",// 5V
+    NULL,
+    i2c_dev_show_voltage2,
+    NULL,
+    0x24, 0, 16,
+  },
+  {
+    "date",
+    NULL,
+    i2c_dev_show_date,
+    NULL,
+    0x2D, 0, 24,
+  },
+  {
+    "in3_input",// 12V
+    NULL,
+    i2c_dev_show_voltage3,
+    NULL,
+    0x30, 0, 16,
+  },
+  {
+    "in4_input",// VDIMM
+    NULL,
+    i2c_dev_show_voltage0,
+    NULL,
+    0x32, 0, 16,
+  },
+  {
+    "product_name",
+    NULL,
+    i2c_dev_show_ascii,
+    NULL,
+    0x3C, 0, 32,
+  },
+  {
+    "customize_name",
+    NULL,
+    i2c_dev_show_ascii,
+    NULL,
+    0x4D, 0, 24,
+  },
+  {
+    "mac",
+    NULL,
+    i2c_dev_show_mac,
+    NULL,
+    0x50, 0, 48,
+  },
+  {
+    "serial_number",
+    NULL,
+    i2c_dev_show_ascii,
+    NULL,
+    0x60, 0, 256,
+  },
+  {
+    "in0_label",
+    "CPU Vcore",
+    i2c_dev_show_label,
+    NULL,
+    0x0, 0, 0,
+  },
+  {
+    "in1_label",
+    "+3V Voltage",
+    i2c_dev_show_label,
+    NULL,
+    0x0, 0, 0,
+  },
+  {
+    "in2_label",
+    "+5V Voltage",
+    i2c_dev_show_label,
+    NULL,
+    0x0, 0, 0,
+  },
+  {
+    "in3_label",
+    "+12V Voltage",
+    i2c_dev_show_label,
+    NULL,
+    0x0, 0, 0,
+  },
+  {
+    "in4_label",
+    "VDIMM Voltage",
+    i2c_dev_show_label,
+    NULL,
+    0x0, 0, 0,
+  },
+  {
+    "temp1_label",
+    "CPU Temp",
+    i2c_dev_show_label,
+    NULL,
+    0x0, 0, 0,
+  },
+};
+
+static i2c_dev_data_st com_e_data;
+
+/*
+ * COMe i2c addresses.
+ * normal_i2c is used in I2C_CLIENT_INSMOD_1()
+ */
+static const unsigned short normal_i2c[] = {
+  0x33, I2C_CLIENT_END
+};
+
+/*
+ * Insmod parameters
+ */
+I2C_CLIENT_INSMOD_1(com_e);
+
+/* COMe id */
+static const struct i2c_device_id com_e_id[] = {
+  { "com_e_driver", com_e_id },
+  { },
+};
+MODULE_DEVICE_TABLE(i2c, com_e_id);
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int com_e_detect(struct i2c_client *client, int kind,
+                          struct i2c_board_info *info)
+{
+  /*
+   * We don't currently do any detection of the COMe
+   */
+  strlcpy(info->type, "com_e_driver", I2C_NAME_SIZE);
+  return 0;
+}
+
+static int com_e_probe(struct i2c_client *client,
+                         const struct i2c_device_id *id)
+{
+  int n_attrs = sizeof(com_e_attr_table) / sizeof(com_e_attr_table[0]);
+  return i2c_dev_sysfs_data_init(client, &com_e_data,
+                                 com_e_attr_table, n_attrs);
+}
+
+static int com_e_remove(struct i2c_client *client)
+{
+  i2c_dev_sysfs_data_clean(client, &com_e_data);
+  return 0;
+}
+
+static struct i2c_driver com_e_driver = {
+  .class    = I2C_CLASS_HWMON,
+  .driver = {
+    .name = "com_e_driver",
+  },
+  .probe    = com_e_probe,
+  .remove   = com_e_remove,
+  .id_table = com_e_id,
+  .detect   = com_e_detect,
+  /* addr_data is defined through I2C_CLIENT_INSMOD_1() */
+  .address_data = &addr_data,
+};
+
+static int __init com_e_mod_init(void)
+{
+  return i2c_add_driver(&com_e_driver);
+}
+
+static void __exit com_e_mod_exit(void)
+{
+  i2c_del_driver(&com_e_driver);
+}
+
+MODULE_AUTHOR("Vineela Kukkadapu <vineelak@fb.com>");
+MODULE_DESCRIPTION("COM_E Driver");
+MODULE_LICENSE("GPL");
+
+module_init(com_e_mod_init);
+module_exit(com_e_mod_exit);
diff --git a/meta-raptor/meta-asus/recipes-kernel/com-e-mod/kernel-module-com-e-driver_0.1.bb b/meta-raptor/meta-asus/recipes-kernel/com-e-mod/kernel-module-com-e-driver_0.1.bb
new file mode 100644
index 0000000..8ec6511
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-kernel/com-e-mod/kernel-module-com-e-driver_0.1.bb
@@ -0,0 +1,40 @@
+# Copyright 2016-present Raptor Engineering. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+
+SUMMARY = "ASUS COMe driver"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=12f884d2ae1ff87c09e5b7ccc2c4ca7e"
+
+inherit module
+
+PR = "r0"
+PV = "0.1"
+
+SRC_URI = "file://Makefile \
+           file://com_e_driver.c \
+           file://COPYING \
+          "
+
+S = "${WORKDIR}"
+
+DEPENDS += "kernel-module-i2c-dev-sysfs"
+
+RDEPENDS_${PN} += "kernel-module-i2c-dev-sysfs"
+
+KERNEL_MODULE_AUTOLOAD += " \
+ com_e_driver \
+"
diff --git a/meta-raptor/meta-asus/recipes-kernel/cpld-mod/files/COPYING b/meta-raptor/meta-asus/recipes-kernel/cpld-mod/files/COPYING
new file mode 100644
index 0000000..6d45519
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-kernel/cpld-mod/files/COPYING
@@ -0,0 +1,340 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+                       51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.
diff --git a/meta-raptor/meta-asus/recipes-kernel/cpld-mod/files/Makefile b/meta-raptor/meta-asus/recipes-kernel/cpld-mod/files/Makefile
new file mode 100644
index 0000000..bfbd786
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-kernel/cpld-mod/files/Makefile
@@ -0,0 +1,31 @@
+# Copyright 2015-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+
+obj-m := syscpld.o fancpld.o 
+
+SRC := $(shell pwd)
+
+all:
+	$(MAKE) -C $(KERNEL_SRC) M=$(SRC) 
+
+modules_install:
+	$(MAKE) -C $(KERNEL_SRC) M=$(SRC) modules_install
+
+clean:
+	rm -f *.o *~ core .depend .*.cmd *.ko *.mod.c
+	rm -f Module.markers Module.symvers modules.order
+	rm -rf .tmp_versions Modules.symvers
diff --git a/meta-raptor/meta-asus/recipes-kernel/cpld-mod/files/fancpld.c b/meta-raptor/meta-asus/recipes-kernel/cpld-mod/files/fancpld.c
new file mode 100644
index 0000000..65ea0d1
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-kernel/cpld-mod/files/fancpld.c
@@ -0,0 +1,396 @@
+/*
+ * fancpld.c - The i2c driver for FANBOARDCPLD
+ *
+ * Copyright 2015-present Facebook. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+//#define DEBUG
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/i2c_dev_sysfs.h>
+
+#ifdef DEBUG
+
+#define PP_DEBUG(fmt, ...) do {                   \
+  printk(KERN_DEBUG "%s:%d " fmt "\n",            \
+         __FUNCTION__, __LINE__, ##__VA_ARGS__);  \
+} while (0)
+
+#else /* !DEBUG */
+
+#define PP_DEBUG(fmt, ...)
+
+#endif
+
+static ssize_t fancpld_fan_rpm_show(struct device *dev,
+                                    struct device_attribute *attr,
+                                    char *buf)
+{
+  int val;
+
+  val = i2c_dev_read_byte(dev, attr);
+  if (val < 0) {
+    return val;
+  }
+  /* Multiply by 150 to get the RPM */
+  val *= 150;
+
+  return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+}
+
+#define FANTRAY_PWM_HELP                        \
+  "each value represents 1/32 duty cycle"
+#define FANTRAY_LED_CTRL_HELP                   \
+  "0x0: Under HW control\n"                     \
+  "0x1: Red off, Blue on\n"                     \
+  "0x2: Red on, Blue off\n"                     \
+  "0x3: Red off, Blue off"
+#define FANTRAY_LED_BLINK_HELP                  \
+  "0: no blink\n"                               \
+  "1: blink"
+
+static const i2c_dev_attr_st fancpld_attr_table[] = {
+  {
+    "board_rev",
+    NULL,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    NULL,
+    0, 0, 4,
+  },
+  {
+    "model_id",
+    "0x0: wedge100\n"
+    "0x1: 6-pack100 linecard\n"
+    "0x2: 6-pack100 fabric card\n"
+    "0x3: reserved",
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    NULL,
+    0, 4, 2,
+  },
+  {
+    "cpld_rev",
+    NULL,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    NULL,
+    1, 0, 6,
+  },
+  {
+    "cpld_released",
+    NULL,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    NULL,
+    1, 6, 1,
+  },
+  {
+    "cpld_sub_rev",
+    NULL,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    NULL,
+    2, 0, 8,
+  },
+  {
+    "slotid",
+    NULL,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    NULL,
+    3, 0, 5,
+  },
+  {
+    "jaybox_gpio",
+    NULL,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    NULL,
+    4, 0, 8,
+  },
+  {
+    "jaybox_status",
+    NULL,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    NULL,
+    5, 0, 2,
+  },
+  {
+    "fantray_failure",
+    "bit value 0: fan tray has failure\n"
+    "bit value 1: fan try is good and alive",
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    NULL,
+    9, 0, 5,
+  },
+  {
+    "fan1_input",
+    NULL,
+    fancpld_fan_rpm_show,
+    NULL,
+    0x10, 0, 8,
+  },
+  {
+    "fan2_input",
+    NULL,
+    fancpld_fan_rpm_show,
+    NULL,
+    0x11, 0, 8,
+  },
+  {
+    "fan3_input",
+    NULL,
+    fancpld_fan_rpm_show,
+    NULL,
+    0x12, 0, 8,
+  },
+  {
+    "fan4_input",
+    NULL,
+    fancpld_fan_rpm_show,
+    NULL,
+    0x13, 0, 8,
+  },
+  {
+    "fan5_input",
+    NULL,
+    fancpld_fan_rpm_show,
+    NULL,
+    0x14, 0, 8,
+  },
+  {
+    "fan6_input",
+    NULL,
+    fancpld_fan_rpm_show,
+    NULL,
+    0x15, 0, 8,
+  },
+  {
+    "fan7_input",
+    NULL,
+    fancpld_fan_rpm_show,
+    NULL,
+    0x16, 0, 8,
+  },
+  {
+    "fan8_input",
+    NULL,
+    fancpld_fan_rpm_show,
+    NULL,
+    0x17, 0, 8,
+  },
+  {
+    "fan9_input",
+    NULL,
+    fancpld_fan_rpm_show,
+    NULL,
+    0x18, 0, 8,
+  },
+  {
+    "fan10_input",
+    NULL,
+    fancpld_fan_rpm_show,
+    NULL,
+    0x19, 0, 8,
+  },
+  {
+    "fantray_present",
+    "0: present\n"
+    "1: not present",
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    NULL,
+    0x1d, 0, 5,
+  },
+  {
+    "fantray1_pwm",
+    FANTRAY_PWM_HELP,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    I2C_DEV_ATTR_STORE_DEFAULT,
+    0x20, 0, 5,
+  },
+  {
+    "fantray2_pwm",
+    FANTRAY_PWM_HELP,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    I2C_DEV_ATTR_STORE_DEFAULT,
+    0x21, 0, 5,
+  },
+  {
+    "fantray3_pwm",
+    FANTRAY_PWM_HELP,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    I2C_DEV_ATTR_STORE_DEFAULT,
+    0x22, 0, 5,
+  },
+  {
+    "fantray4_pwm",
+    FANTRAY_PWM_HELP,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    I2C_DEV_ATTR_STORE_DEFAULT,
+    0x23, 0, 5,
+  },
+  {
+    "fantray5_pwm",
+    FANTRAY_PWM_HELP,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    I2C_DEV_ATTR_STORE_DEFAULT,
+    0x24, 0, 5,
+  },
+  {
+    "fantray1_led_ctrl",
+    FANTRAY_LED_CTRL_HELP,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    I2C_DEV_ATTR_STORE_DEFAULT,
+    0x25, 0, 2,
+  },
+  {
+    "fantray1_led_blink",
+    FANTRAY_LED_BLINK_HELP,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    I2C_DEV_ATTR_STORE_DEFAULT,
+    0x25, 2, 1,
+  },
+  {
+    "fantray2_led_ctrl",
+    FANTRAY_LED_CTRL_HELP,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    I2C_DEV_ATTR_STORE_DEFAULT,
+    0x25, 4, 2,
+  },
+  {
+    "fantray2_led_blink",
+    FANTRAY_LED_BLINK_HELP,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    I2C_DEV_ATTR_STORE_DEFAULT,
+    0x25, 6, 1,
+  },
+  {
+    "fantray3_led_ctrl",
+    FANTRAY_LED_CTRL_HELP,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    I2C_DEV_ATTR_STORE_DEFAULT,
+    0x26, 0, 2,
+  },
+  {
+    "fantray3_led_blink",
+    FANTRAY_LED_BLINK_HELP,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    I2C_DEV_ATTR_STORE_DEFAULT,
+    0x26, 2, 1,
+  },
+  {
+    "fantray4_led_ctrl",
+    FANTRAY_LED_CTRL_HELP,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    I2C_DEV_ATTR_STORE_DEFAULT,
+    0x26, 4, 2,
+  },
+  {
+    "fantray4_led_blink",
+    FANTRAY_LED_BLINK_HELP,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    I2C_DEV_ATTR_STORE_DEFAULT,
+    0x26, 6, 1,
+  },
+  {
+    "fantray5_led_ctrl",
+    FANTRAY_LED_CTRL_HELP,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    I2C_DEV_ATTR_STORE_DEFAULT,
+    0x27, 0, 2,
+  },
+  {
+    "fantray5_led_blink",
+    FANTRAY_LED_BLINK_HELP,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    I2C_DEV_ATTR_STORE_DEFAULT,
+    0x27, 2, 1,
+  },
+};
+
+static i2c_dev_data_st fancpld_data;
+
+/*
+ * FANCPLD i2c addresses.
+ * normal_i2c is used in I2C_CLIENT_INSMOD_1()
+ */
+static const unsigned short normal_i2c[] = {
+  0x33, I2C_CLIENT_END
+};
+
+/*
+ * Insmod parameters
+ */
+I2C_CLIENT_INSMOD_1(fancpld);
+
+/* FANCPLD id */
+static const struct i2c_device_id fancpld_id[] = {
+  { "fancpld", fancpld },
+  { },
+};
+MODULE_DEVICE_TABLE(i2c, fancpld_id);
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int fancpld_detect(struct i2c_client *client, int kind,
+                          struct i2c_board_info *info)
+{
+  /*
+   * We don't currently do any detection of the FANCPLD
+   */
+  strlcpy(info->type, "fancpld", I2C_NAME_SIZE);
+  return 0;
+}
+
+static int fancpld_probe(struct i2c_client *client,
+                         const struct i2c_device_id *id)
+{
+  int n_attrs = sizeof(fancpld_attr_table) / sizeof(fancpld_attr_table[0]);
+  return i2c_dev_sysfs_data_init(client, &fancpld_data,
+                                 fancpld_attr_table, n_attrs);
+}
+
+static int fancpld_remove(struct i2c_client *client)
+{
+  i2c_dev_sysfs_data_clean(client, &fancpld_data);
+  return 0;
+}
+
+static struct i2c_driver fancpld_driver = {
+  .class    = I2C_CLASS_HWMON,
+  .driver = {
+    .name = "fancpld",
+  },
+  .probe    = fancpld_probe,
+  .remove   = fancpld_remove,
+  .id_table = fancpld_id,
+  .detect   = fancpld_detect,
+  /* addr_data is defined through I2C_CLIENT_INSMOD_1() */
+  .address_data = &addr_data,
+};
+
+static int __init fancpld_mod_init(void)
+{
+  return i2c_add_driver(&fancpld_driver);
+}
+
+static void __exit fancpld_mod_exit(void)
+{
+  i2c_del_driver(&fancpld_driver);
+}
+
+MODULE_AUTHOR("Tian Fang <tfang@fb.com>");
+MODULE_DESCRIPTION("FANCPLD Driver");
+MODULE_LICENSE("GPL");
+
+module_init(fancpld_mod_init);
+module_exit(fancpld_mod_exit);
diff --git a/meta-raptor/meta-asus/recipes-kernel/cpld-mod/files/syscpld.c b/meta-raptor/meta-asus/recipes-kernel/cpld-mod/files/syscpld.c
new file mode 100644
index 0000000..1f5abeb
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-kernel/cpld-mod/files/syscpld.c
@@ -0,0 +1,281 @@
+/*
+ * syscpld.c - The i2c driver for SYSCPLD
+ *
+ * Copyright 2015-present Facebook. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+//#define DEBUG
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/i2c_dev_sysfs.h>
+
+#ifdef DEBUG
+
+#define PP_DEBUG(fmt, ...) do {                   \
+  printk(KERN_DEBUG "%s:%d " fmt "\n",            \
+         __FUNCTION__, __LINE__, ##__VA_ARGS__);  \
+} while (0)
+
+#else /* !DEBUG */
+
+#define PP_DEBUG(fmt, ...)
+
+#endif
+
+static const i2c_dev_attr_st syscpld_attr_table[] = {
+  {
+    "board_rev",
+    NULL,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    NULL,
+    0, 0, 4,
+  },
+  {
+    "model_id",
+    "0x0: wedge100\n"
+    "0x1: 6-pack100 linecard\n"
+    "0x2: 6-pack100 fabric card\n"
+    "0x3: reserved",
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    NULL,
+    0, 4, 2,
+  },
+  {
+    "cpld_rev",
+    NULL,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    NULL,
+    1, 0, 6,
+  },
+  {
+    "cpld_released",
+    NULL,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    NULL,
+    1, 6, 1,
+  },
+  {
+    "cpld_sub_rev",
+    NULL,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    NULL,
+    2, 0, 8,
+  },
+  {
+    "slotid",
+    NULL,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    NULL,
+    3, 0, 5,
+  },
+  {
+    "psu1_present",
+    NULL,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    NULL,
+    8, 0, 1,
+  },
+  {
+    "psu2_present",
+    NULL,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    NULL,
+    8, 1, 1,
+  },
+  {
+    "fan_rackmon_present",
+    NULL,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    NULL,
+    8, 2, 1,
+  },
+  {
+    "micro_srv_present",
+    NULL,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    NULL,
+    8, 3, 1,
+  },
+  {
+    "th_rov",
+    NULL,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    NULL,
+    0xb, 0, 4,
+  },
+  {
+    "vcore_idsel",
+    NULL,
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    NULL,
+    0xb, 4, 3,
+  },
+  {
+    "uart_mux",
+    "0x0: UART_SELECT_BMC\n0x1: UART_SELECT_DBG\n"
+    "0x2: Force to select 0\n0x3: Force to select 1\n\n"
+    "UART_SEL\n"
+    "1: micro-server console connected to BMC\n"
+    "0: micro-server console connected to debug header",
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    I2C_DEV_ATTR_STORE_DEFAULT,
+    0x26, 0, 2,
+  },
+  {
+    "heart_attach_en",
+    "0: no fan tray fatal error attack\n"
+    "1: fan-tray fatal error attack mode enabled",
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    I2C_DEV_ATTR_STORE_DEFAULT,
+    0x2e, 7, 1,
+  },
+  {
+    "dual_boot_en",
+    "0: single boot\n"
+    "1: dual boot",
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    I2C_DEV_ATTR_STORE_DEFAULT,
+    0x2f, 0, 1,
+  },
+  {
+    "2nd_flash_wp",
+    "0: writeable\n"
+    "1: write protected",
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    I2C_DEV_ATTR_STORE_DEFAULT,
+    0x2f, 1, 1,
+  },
+  {
+    "pwr_cyc_all_n",
+    "0: power cycle all power\n"
+    "1: normal",
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    I2C_DEV_ATTR_STORE_DEFAULT,
+    0x30, 0, 1,
+  },
+  {
+    "pwr_main_n",
+    "0: main power is off\n"
+    "1: main power is enabled",
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    I2C_DEV_ATTR_STORE_DEFAULT,
+    0x30, 1, 1,
+  },
+  {
+    "pwr_usrv_en",
+    "0: micro-server power is off\n"
+    "1: micro-server power is on",
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    I2C_DEV_ATTR_STORE_DEFAULT,
+    0x30, 2, 1,
+  },
+  {
+    "pwr_usrv_btn_en",
+    "0: micro-server power button is off\n"
+    "1: micro-server power button is on",
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    I2C_DEV_ATTR_STORE_DEFAULT,
+    0x30, 3, 1,
+  },
+  {
+    "usrv_rst_n",
+    "0: write 0 to trigger micro-server reset"
+    "1: normal",
+    I2C_DEV_ATTR_SHOW_DEFAULT,
+    I2C_DEV_ATTR_STORE_DEFAULT,
+    0x32, 0, 1,
+  },
+};
+
+static i2c_dev_data_st syscpld_data;
+
+/*
+ * SYSCPLD i2c addresses.
+ * normal_i2c is used in I2C_CLIENT_INSMOD_1()
+ */
+static const unsigned short normal_i2c[] = {
+  0x31, I2C_CLIENT_END
+};
+
+/*
+ * Insmod parameters
+ */
+I2C_CLIENT_INSMOD_1(syscpld);
+
+/* SYSCPLD id */
+static const struct i2c_device_id syscpld_id[] = {
+  { "syscpld", syscpld },
+  { },
+};
+MODULE_DEVICE_TABLE(i2c, syscpld_id);
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int syscpld_detect(struct i2c_client *client, int kind,
+                          struct i2c_board_info *info)
+{
+  /*
+   * We don't currently do any detection of the SYSCPLD
+   */
+  strlcpy(info->type, "syscpld", I2C_NAME_SIZE);
+  return 0;
+}
+
+static int syscpld_probe(struct i2c_client *client,
+                         const struct i2c_device_id *id)
+{
+  int n_attrs = sizeof(syscpld_attr_table) / sizeof(syscpld_attr_table[0]);
+  return i2c_dev_sysfs_data_init(client, &syscpld_data,
+                                 syscpld_attr_table, n_attrs);
+}
+
+static int syscpld_remove(struct i2c_client *client)
+{
+  i2c_dev_sysfs_data_clean(client, &syscpld_data);
+  return 0;
+}
+
+static struct i2c_driver syscpld_driver = {
+  .class    = I2C_CLASS_HWMON,
+  .driver = {
+    .name = "syscpld",
+  },
+  .probe    = syscpld_probe,
+  .remove   = syscpld_remove,
+  .id_table = syscpld_id,
+  .detect   = syscpld_detect,
+  /* addr_data is defined through I2C_CLIENT_INSMOD_1() */
+  .address_data = &addr_data,
+};
+
+static int __init syscpld_mod_init(void)
+{
+  return i2c_add_driver(&syscpld_driver);
+}
+
+static void __exit syscpld_mod_exit(void)
+{
+  i2c_del_driver(&syscpld_driver);
+}
+
+MODULE_AUTHOR("Tian Fang <tfang@fb.com>");
+MODULE_DESCRIPTION("SYSCPLD Driver");
+MODULE_LICENSE("GPL");
+
+module_init(syscpld_mod_init);
+module_exit(syscpld_mod_exit);
diff --git a/meta-raptor/meta-asus/recipes-kernel/cpld-mod/kernel-module-cpld_0.1.bb b/meta-raptor/meta-asus/recipes-kernel/cpld-mod/kernel-module-cpld_0.1.bb
new file mode 100644
index 0000000..0e6b4f7
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-kernel/cpld-mod/kernel-module-cpld_0.1.bb
@@ -0,0 +1,42 @@
+# Copyright 2016-present Raptor Engineering. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+
+SUMMARY = "ASUS CPLD drivers"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=12f884d2ae1ff87c09e5b7ccc2c4ca7e"
+
+inherit module
+
+PR = "r0"
+PV = "0.1"
+
+SRC_URI = "file://Makefile \
+           file://syscpld.c \
+           file://fancpld.c \
+           file://COPYING \
+          "
+
+S = "${WORKDIR}"
+
+DEPENDS += "kernel-module-i2c-dev-sysfs"
+
+RDEPENDS_${PN} += "kernel-module-i2c-dev-sysfs"
+
+KERNEL_MODULE_AUTOLOAD += "                     \
+ syscpld                                        \
+ fancpld                                        \
+"
diff --git a/meta-raptor/meta-asus/recipes-kernel/i2c-dev-sysfs-mod/files/COPYING b/meta-raptor/meta-asus/recipes-kernel/i2c-dev-sysfs-mod/files/COPYING
new file mode 100644
index 0000000..6d45519
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-kernel/i2c-dev-sysfs-mod/files/COPYING
@@ -0,0 +1,340 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+                       51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.
diff --git a/meta-raptor/meta-asus/recipes-kernel/i2c-dev-sysfs-mod/files/Makefile b/meta-raptor/meta-asus/recipes-kernel/i2c-dev-sysfs-mod/files/Makefile
new file mode 100644
index 0000000..4be7b62
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-kernel/i2c-dev-sysfs-mod/files/Makefile
@@ -0,0 +1,31 @@
+# Copyright 2015-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+
+obj-m := i2c_dev_sysfs.o 
+
+SRC := $(shell pwd)
+
+all:
+	$(MAKE) -C $(KERNEL_SRC) M=$(SRC)
+
+modules_install:
+	$(MAKE) -C $(KERNEL_SRC) M=$(SRC) modules_install
+
+clean:
+	rm -f *.o *~ core .depend .*.cmd *.ko *.mod.c
+	rm -f Module.markers Module.symvers modules.order
+	rm -rf .tmp_versions Modules.symvers
diff --git a/meta-raptor/meta-asus/recipes-kernel/i2c-dev-sysfs-mod/files/i2c_dev_sysfs.c b/meta-raptor/meta-asus/recipes-kernel/i2c-dev-sysfs-mod/files/i2c_dev_sysfs.c
new file mode 100644
index 0000000..96c1b98
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-kernel/i2c-dev-sysfs-mod/files/i2c_dev_sysfs.c
@@ -0,0 +1,349 @@
+/*
+ * i2c_dev_sysfs.c - The i2c device sysfs library
+ *
+ * Copyright 2015-present Facebook. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+//#define DEBUG
+
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+
+#include "i2c_dev_sysfs.h"
+
+#ifdef DEBUG
+
+#define PP_DEBUG(fmt, ...) do {                   \
+  printk(KERN_DEBUG "%s:%d " fmt "\n",            \
+         __FUNCTION__, __LINE__, ##__VA_ARGS__);  \
+} while (0)
+
+#else /* !DEBUG */
+
+#define PP_DEBUG(fmt, ...)
+
+#endif
+
+ssize_t i2c_dev_show_label(struct device *dev,
+                           struct device_attribute *attr,
+                           char *buf)
+{
+  i2c_sysfs_attr_st *i2c_attr = TO_I2C_SYSFS_ATTR(attr);
+  const i2c_dev_attr_st *dev_attr = i2c_attr->isa_i2c_attr;
+
+  if (dev_attr->ida_help) {
+    return sprintf(buf, "%s\n", dev_attr->ida_help);
+  }
+  return sprintf(buf, "%s\n", dev_attr->ida_name);
+}
+EXPORT_SYMBOL_GPL(i2c_dev_show_label);
+
+int i2c_dev_read_byte(struct device *dev,
+                      struct device_attribute *attr)
+{
+  struct i2c_client *client = to_i2c_client(dev);
+  i2c_dev_data_st *data = i2c_get_clientdata(client);
+  i2c_sysfs_attr_st *i2c_attr = TO_I2C_SYSFS_ATTR(attr);
+  const i2c_dev_attr_st *dev_attr = i2c_attr->isa_i2c_attr;
+  int val;
+  int val_mask;
+
+  val_mask = ~(((-1) >> (dev_attr->ida_n_bits)) << (dev_attr->ida_n_bits));
+
+  mutex_lock(&data->idd_lock);
+
+  val = i2c_smbus_read_byte_data(client, dev_attr->ida_reg);
+
+  mutex_unlock(&data->idd_lock);
+
+  if (val < 0) {
+    /* error case */
+    return val;
+  }
+
+  val = (val >> dev_attr->ida_bit_offset) & val_mask;
+  return val;
+}
+EXPORT_SYMBOL_GPL(i2c_dev_read_byte);
+
+int i2c_dev_read_nbytes(struct device *dev,
+                        struct device_attribute *attr,
+                        uint8_t values[],
+                        int nbytes)
+{
+  struct i2c_client *client = to_i2c_client(dev);
+  i2c_dev_data_st *data = i2c_get_clientdata(client);
+  i2c_sysfs_attr_st *i2c_attr = TO_I2C_SYSFS_ATTR(attr);
+  const i2c_dev_attr_st *dev_attr = i2c_attr->isa_i2c_attr;
+  int i;
+
+  mutex_lock(&data->idd_lock);
+  for (i = 0; i < nbytes; ++i) {
+    values[i] = i2c_smbus_read_byte_data(client, dev_attr->ida_reg + i);
+    if (values[i] < 0) {
+      mutex_unlock(&data->idd_lock);
+      return values[i];
+    }
+  }
+  mutex_unlock(&data->idd_lock);
+  return nbytes;
+}
+EXPORT_SYMBOL_GPL(i2c_dev_read_nbytes);
+
+int i2c_dev_read_word_littleendian(struct device *dev,
+                                struct device_attribute *attr)
+{
+  uint8_t values[2];
+  int ret_val;
+
+  ret_val = i2c_dev_read_nbytes(dev, attr, values, 2);
+  if (ret_val < 0) {
+    return ret_val;
+  }
+  // values[0] : LSB
+  // values[1] : MSB
+  return ((values[1]<<8) + values[0]);
+}
+EXPORT_SYMBOL_GPL(i2c_dev_read_word_littleendian);
+
+int i2c_dev_read_word_bigendian(struct device *dev,
+                                struct device_attribute *attr)
+{
+  uint8_t values[2];
+  int ret_val;
+
+  ret_val = i2c_dev_read_nbytes(dev, attr, values, 2);
+  if (ret_val < 0) {
+    return ret_val;
+  }
+  // values[0] : MSB
+  // values[1] : LSB
+  return ((values[0]<<8) + values[1]);
+}
+EXPORT_SYMBOL_GPL(i2c_dev_read_word_bigendian);
+
+ssize_t i2c_dev_show_ascii(struct device *dev,
+                           struct device_attribute *attr,
+                           char *buf)
+{
+  i2c_sysfs_attr_st *i2c_attr = TO_I2C_SYSFS_ATTR(attr);
+  const i2c_dev_attr_st *dev_attr = i2c_attr->isa_i2c_attr;
+  int nbytes, ret_val;
+
+  nbytes = (dev_attr->ida_n_bits) / 8;
+  ret_val = i2c_dev_read_nbytes(dev, attr, buf, nbytes);
+  if (ret_val < 0) {
+    return ret_val;
+  }
+  //buf[] : ascii data
+  buf[nbytes] = '\n';
+  return (nbytes + 1);
+}
+EXPORT_SYMBOL_GPL(i2c_dev_show_ascii);
+
+static ssize_t i2c_dev_sysfs_show(struct device *dev,
+                                  struct device_attribute *attr,
+                                  char *buf)
+{
+  struct i2c_client *client = to_i2c_client(dev);
+  i2c_dev_data_st *data = i2c_get_clientdata(client);
+  i2c_sysfs_attr_st *i2c_attr = TO_I2C_SYSFS_ATTR(attr);
+  const i2c_dev_attr_st *dev_attr = i2c_attr->isa_i2c_attr;
+  int val;
+  int val_mask;
+
+  if (!dev_attr->ida_show) {
+    return -EOPNOTSUPP;
+  }
+
+  if (dev_attr->ida_show != I2C_DEV_ATTR_SHOW_DEFAULT) {
+    return dev_attr->ida_show(dev, attr, buf);
+  }
+
+  val_mask = ~(((-1) >> (dev_attr->ida_n_bits)) << (dev_attr->ida_n_bits));
+
+  mutex_lock(&data->idd_lock);
+
+  /* default handling */
+  val = i2c_smbus_read_byte_data(client, dev_attr->ida_reg);
+
+  mutex_unlock(&data->idd_lock);
+
+  if (val < 0) {
+    /* error case */
+    return val;
+  }
+
+  val = (val >> dev_attr->ida_bit_offset) & val_mask;
+
+  return scnprintf(buf, PAGE_SIZE, "0x%x%s%s\n", val,
+                   (dev_attr->ida_help) ? "\n\nNote:\n" : "",
+                   (dev_attr->ida_help) ? dev_attr->ida_help : "");
+}
+
+static ssize_t i2c_dev_sysfs_store(struct device *dev,
+                                   struct device_attribute *attr,
+                                   const char *buf, size_t count)
+{
+  struct i2c_client *client = to_i2c_client(dev);
+  i2c_dev_data_st *data = i2c_get_clientdata(client);
+  i2c_sysfs_attr_st *i2c_attr = TO_I2C_SYSFS_ATTR(attr);
+  const i2c_dev_attr_st *dev_attr = i2c_attr->isa_i2c_attr;
+  int val;
+  int req_val;
+  int req_val_mask;
+
+  if (!dev_attr->ida_store) {
+    return -EOPNOTSUPP;
+  }
+
+  if (dev_attr->ida_store != I2C_DEV_ATTR_STORE_DEFAULT) {
+    return dev_attr->ida_store(dev, attr, buf, count);
+  }
+
+  /* parse the buffer */
+  if (sscanf(buf, "%i", &req_val) <= 0) {
+    return -EINVAL;
+  }
+  req_val_mask = ~(((-1) >> (dev_attr->ida_n_bits)) << (dev_attr->ida_n_bits));
+  req_val &= req_val_mask;
+
+  mutex_lock(&data->idd_lock);
+
+  /* default handling, first read back the current value */
+  val = i2c_smbus_read_byte_data(client, dev_attr->ida_reg);
+
+  if (val < 0) {
+    /* fail to read */
+    goto unlock_out;
+  }
+
+  /* mask out all bits for the value requested */
+  val &= ~(req_val_mask << dev_attr->ida_bit_offset);
+  val |= req_val << dev_attr->ida_bit_offset;
+
+  val = i2c_smbus_write_byte_data(client, dev_attr->ida_reg, val);
+
+ unlock_out:
+  mutex_unlock(&data->idd_lock);
+
+  if (val < 0) {
+    /* error case */
+    return val;
+  }
+
+  return count;
+}
+
+void i2c_dev_sysfs_data_clean(struct i2c_client *client, i2c_dev_data_st *data)
+{
+  if (!data) {
+    return;
+  }
+  if (data->idd_hwmon_dev) {
+    hwmon_device_unregister(data->idd_hwmon_dev);
+  }
+  if (data->idd_attr_group.attrs) {
+    sysfs_remove_group(&client->dev.kobj, &data->idd_attr_group);
+    kfree(data->idd_attr_group.attrs);
+  }
+  if (data->idd_attrs) {
+    kfree(data->idd_attrs);
+  }
+  memset(data, 0, sizeof(*data));
+}
+EXPORT_SYMBOL_GPL(i2c_dev_sysfs_data_clean);
+
+int i2c_dev_sysfs_data_init(struct i2c_client *client,
+                            i2c_dev_data_st *data,
+                            const i2c_dev_attr_st *dev_attrs,
+                            int n_attrs)
+{
+  int i;
+  int err;
+  i2c_sysfs_attr_st *cur_attr;
+  const i2c_dev_attr_st *cur_dev_attr;
+  struct attribute **cur_grp_attr;
+
+  memset(data, 0, sizeof(*data));
+
+  i2c_set_clientdata(client, data);
+  mutex_init(&data->idd_lock);
+
+  /* allocate all attribute */
+  data->idd_attrs = kzalloc(sizeof(*data->idd_attrs) * n_attrs, GFP_KERNEL);
+  /* allocate the attribute group. +1 for the last NULL */
+  data->idd_attr_group.attrs
+    = kzalloc(sizeof(*data->idd_attr_group.attrs) * (n_attrs + 1), GFP_KERNEL);
+  if (!data->idd_attrs || !data->idd_attr_group.attrs) {
+    err = -ENOMEM;
+    goto exit_cleanup;
+  }
+  PP_DEBUG("Allocated %u attributes", n_attrs);
+
+  for (i = 0,
+         cur_attr = &data->idd_attrs[0],
+         cur_grp_attr = &data->idd_attr_group.attrs[0],
+         cur_dev_attr = dev_attrs;
+       i < n_attrs;
+       i++, cur_attr++, cur_grp_attr++, cur_dev_attr++) {
+
+    mode_t mode = S_IRUGO;
+    if (cur_dev_attr->ida_store) {
+      mode |= S_IWUSR;
+    }
+    cur_attr->isa_dev_attr.attr.name = cur_dev_attr->ida_name;
+    cur_attr->isa_dev_attr.attr.mode = mode;
+    cur_attr->isa_dev_attr.show = i2c_dev_sysfs_show;
+    cur_attr->isa_dev_attr.store = i2c_dev_sysfs_store;
+    *cur_grp_attr = &cur_attr->isa_dev_attr.attr;
+    cur_attr->isa_i2c_attr = cur_dev_attr;
+    PP_DEBUG("Created attribute \"%s\"", cur_attr->isa_dev_attr.attr.name);
+  }
+
+  /* Register sysfs hooks */
+  if ((err = sysfs_create_group(&client->dev.kobj, &data->idd_attr_group))) {
+    goto exit_cleanup;
+  }
+
+  data->idd_hwmon_dev = hwmon_device_register(&client->dev);
+  if (IS_ERR(data->idd_hwmon_dev)) {
+    err = PTR_ERR(data->idd_hwmon_dev);
+    data->idd_hwmon_dev = NULL;
+    goto exit_cleanup;
+  }
+
+  PP_DEBUG("i2c device sysfs init data done");
+
+  return 0;
+
+ exit_cleanup:
+  i2c_dev_sysfs_data_clean(client, data);
+  return err;
+}
+EXPORT_SYMBOL_GPL(i2c_dev_sysfs_data_init);
+
+
+MODULE_AUTHOR("Tian Fang <tfang@fb.com>");
+MODULE_DESCRIPTION("i2c device sysfs attribute library");
+MODULE_LICENSE("GPL");
diff --git a/meta-raptor/meta-asus/recipes-kernel/i2c-dev-sysfs-mod/files/i2c_dev_sysfs.h b/meta-raptor/meta-asus/recipes-kernel/i2c-dev-sysfs-mod/files/i2c_dev_sysfs.h
new file mode 100644
index 0000000..47862cc
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-kernel/i2c-dev-sysfs-mod/files/i2c_dev_sysfs.h
@@ -0,0 +1,84 @@
+/*
+ * i2c_dev_sysfs.h - The i2c device sysfs library header
+ *
+ * Copyright 2015-present Facebook. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef I2C_DEV_SYSFS_H
+#define I2C_DEV_SYSFS_H
+
+#include <linux/device.h>
+#include <linux/types.h>
+
+typedef ssize_t (*i2c_dev_attr_show_fn)(struct device *dev,
+                                        struct device_attribute *attr,
+                                        char *buf);
+typedef ssize_t (*i2c_dev_attr_store_fn)(struct device *dev,
+                                         struct device_attribute *attr,
+                                         const char *buf, size_t count);
+
+#define I2C_DEV_ATTR_SHOW_DEFAULT (i2c_dev_attr_show_fn)(1)
+#define I2C_DEV_ATTR_STORE_DEFAULT (i2c_dev_attr_store_fn)(1)
+
+typedef struct i2c_dev_attr_st_ {
+  const char *ida_name;
+  const char *ida_help;
+  i2c_dev_attr_show_fn ida_show;
+  i2c_dev_attr_store_fn ida_store;
+  int ida_reg;
+  int ida_bit_offset;
+  int ida_n_bits;
+} i2c_dev_attr_st;
+
+typedef struct i2c_sysfs_attr_st_{
+	struct device_attribute isa_dev_attr;
+  const i2c_dev_attr_st *isa_i2c_attr;
+} i2c_sysfs_attr_st;
+
+#define TO_I2C_SYSFS_ATTR(_attr) \
+	container_of(_attr, i2c_sysfs_attr_st, isa_dev_attr)
+
+typedef struct i2c_dev_data_st_ {
+  struct device *idd_hwmon_dev;
+  struct mutex idd_lock;
+  i2c_sysfs_attr_st *idd_attrs;
+  struct attribute_group idd_attr_group;
+} i2c_dev_data_st;
+
+int i2c_dev_sysfs_data_init(struct i2c_client *client,
+                            i2c_dev_data_st *data,
+                            const i2c_dev_attr_st *dev_attrs,
+                            int n_attrs);
+void i2c_dev_sysfs_data_clean(struct i2c_client *client, i2c_dev_data_st *data);
+int i2c_dev_read_byte(struct device *dev,
+                      struct device_attribute *attr);
+int i2c_dev_read_nbytes(struct device *dev,
+                        struct device_attribute *attr,
+                        uint8_t values[],
+                        int nbytes);
+int i2c_dev_read_word_littleendian(struct device *dev,
+                                   struct device_attribute *attr);
+int i2c_dev_read_word_bigendian(struct device *dev,
+                                struct device_attribute *attr);
+ssize_t i2c_dev_show_label(struct device *dev,
+                           struct device_attribute *attr,
+                           char *buf);
+ssize_t i2c_dev_show_ascii(struct device *dev,
+                           struct device_attribute *attr,
+                           char *buf);
+
+#endif
diff --git a/meta-raptor/meta-asus/recipes-kernel/i2c-dev-sysfs-mod/kernel-module-i2c-dev-sysfs_0.1.bb b/meta-raptor/meta-asus/recipes-kernel/i2c-dev-sysfs-mod/kernel-module-i2c-dev-sysfs_0.1.bb
new file mode 100644
index 0000000..526ef57
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-kernel/i2c-dev-sysfs-mod/kernel-module-i2c-dev-sysfs_0.1.bb
@@ -0,0 +1,42 @@
+# Copyright 2016-present Raptor Engineering. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+
+SUMMARY = "ASUS i2c device library"
+DESCRIPTION = "i2c device sysfs attribute library"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=12f884d2ae1ff87c09e5b7ccc2c4ca7e"
+
+inherit module
+
+PR = "r0"
+PV = "0.1"
+
+SRC_URI = "file://Makefile \
+           file://i2c_dev_sysfs.c \
+           file://i2c_dev_sysfs.h \
+           file://COPYING \
+          "
+
+S = "${WORKDIR}"
+
+do_install_append() {
+     kerneldir=${STAGING_KERNEL_DIR}/include/linux
+     install -d ${kerneldir}
+     install -m 0644 i2c_dev_sysfs.h ${kerneldir}/
+}
+
+FILES_${PN}-dev = "${kerneldir}/i2c_dev_sysfs.h"
diff --git a/meta-raptor/meta-asus/recipes-kernel/linux/files/defconfig b/meta-raptor/meta-asus/recipes-kernel/linux/files/defconfig
new file mode 100644
index 0000000..ed72c29
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-kernel/linux/files/defconfig
@@ -0,0 +1,1588 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.28.9
+# Wed Mar 16 11:22:39 2016
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=m
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_ARCH_ASPEED=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+CONFIG_IRMP=y
+# CONFIG_PCEXT is not set
+# CONFIG_REMOTEFX is not set
+# CONFIG_ARCH_AST1100 is not set
+CONFIG_ARCH_AST2100=y
+# CONFIG_ARCH_AST2200 is not set
+# CONFIG_ARCH_AST2300 is not set
+# CONFIG_ARCH_AST2400 is not set
+# CONFIG_ARCH_AST2500 is not set
+
+#
+# FLASH Chip Select
+#
+# CONFIG_AST_CS0_NOR is not set
+# CONFIG_AST_CS0_NAND is not set
+# CONFIG_AST_CS0_SPI is not set
+CONFIG_AST_CS0_NONE=y
+# CONFIG_AST_CS1_NOR is not set
+# CONFIG_AST_CS1_NAND is not set
+# CONFIG_AST_CS1_SPI is not set
+CONFIG_AST_CS1_NONE=y
+# CONFIG_AST_CS2_NOR is not set
+# CONFIG_AST_CS2_NAND is not set
+CONFIG_AST_CS2_SPI=y
+# CONFIG_AST_CS2_NONE is not set
+# CONFIG_AST_CS3_NOR is not set
+# CONFIG_AST_CS3_NAND is not set
+# CONFIG_AST_CS3_SPI is not set
+CONFIG_AST_CS3_NONE=y
+# CONFIG_AST_CS4_NOR is not set
+# CONFIG_AST_CS4_NAND is not set
+# CONFIG_AST_CS4_SPI is not set
+CONFIG_AST_CS4_NONE=y
+# CONFIG_ARCH_AST1070 is not set
+# CONFIG_AST_SCU_LOCK is not set
+# CONFIG_WEDGE is not set
+# CONFIG_WEDGE100 is not set
+# CONFIG_YOSEMITE is not set
+# CONFIG_FBPLATFORM1 is not set
+CONFIG_ASUSPLATFORM=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+CONFIG_PLAT_ASPEED=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=y
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=m
+CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
+# CONFIG_MTD_DATAFLASH_OTP is not set
+CONFIG_MTD_M25P80=y
+CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_RD_BZIP2 is not set
+CONFIG_RD_LZMA=y
+CONFIG_RD_GZIP=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+CONFIG_LXT_PHY=y
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+CONFIG_REALTEK_PHY=y
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_ASPEEDMAC=y
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_SERIAL=y
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_AMBAKMI is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_AST_DMA_UART is not set
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+# CONFIG_SERIAL_AMBA_PL011 is not set
+# CONFIG_SERIAL_AST is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_KCS_GENERIC=y
+CONFIG_AST_MISC=y
+# CONFIG_AST_VIDEO is not set
+# CONFIG_ADC_CAT9883 is not set
+# CONFIG_AST_SPI_BIOS is not set
+CONFIG_AST_PECI=y
+CONFIG_AST_KCS=y
+# CONFIG_AST_GPIO is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_NVRAM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_AST=y
+CONFIG_AST_I2C_SLAVE_MODE=y
+CONFIG_AST_I2C_SLAVE_EEPROM=y
+# CONFIG_AST_I2C_SLAVE_RDWR is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+CONFIG_AT24=m
+# CONFIG_SENSORS_EEPROM is not set
+CONFIG_SENSORS_PCF8574=m
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_AST is not set
+CONFIG_SPI_FMC=y
+CONFIG_SPI_BITBANG=y
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_AT25=m
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+CONFIG_SENSORS_LM75=m
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+CONFIG_SENSORS_MAX127=m
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+CONFIG_SENSORS_ADS7828=m
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+CONFIG_SENSORS_W83795=m
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_AST_ADC is not set
+# CONFIG_SENSORS_AST_PWM_FAN is not set
+# CONFIG_SENSORS_FB_PANTHER_PLUS is not set
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+CONFIG_SENSORS_LM25066=m
+CONFIG_SENSORS_LTC2978=m
+CONFIG_SENSORS_MAX16064=m
+CONFIG_SENSORS_MAX34440=m
+CONFIG_SENSORS_MAX8688=m
+CONFIG_SENSORS_PFE1100=m
+CONFIG_SENSORS_PFE3000=m
+CONFIG_SENSORS_UCD9000=m
+CONFIG_SENSORS_UCD9200=m
+CONFIG_SENSORS_ZL6100=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AST_WATCHDOG=y
+# CONFIG_AST_WATCHDOG_REARM_DUAL_BOOT is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_ARMCLCD is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_AST is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=m
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# AST USB Drivers
+#
+# CONFIG_AST_USB_UHCI_HCD is not set
+# CONFIG_AST_USB_UHCI_MULTIPORT_1 is not set
+# CONFIG_AST_USB_UHCI_MULTIPORT_2 is not set
+# CONFIG_AST_USB_UHCI_MULTIPORT_4 is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+CONFIG_USB_GADGET_ASPEED_AST=y
+CONFIG_USB_ASPEED_AST=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PL030 is not set
+# CONFIG_RTC_DRV_PL031 is not set
+CONFIG_RTC_DRV_ASPEED=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+
+#
+# Layered filesystems
+#
+CONFIG_UNION_FS=y
+CONFIG_UNION_FS_XATTR=y
+# CONFIG_UNION_FS_DEBUG is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/meta-raptor/meta-asus/recipes-kernel/linux/files/defconfig_production_candidate b/meta-raptor/meta-asus/recipes-kernel/linux/files/defconfig_production_candidate
new file mode 100644
index 0000000..140c1d6
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-kernel/linux/files/defconfig_production_candidate
@@ -0,0 +1,1574 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.28.9
+# Fri Mar 11 14:20:24 2016
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=m
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_ARCH_ASPEED=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+CONFIG_IRMP=y
+# CONFIG_PCEXT is not set
+# CONFIG_REMOTEFX is not set
+# CONFIG_ARCH_AST1100 is not set
+CONFIG_ARCH_AST2100=y
+# CONFIG_ARCH_AST2200 is not set
+# CONFIG_ARCH_AST2300 is not set
+# CONFIG_ARCH_AST2400 is not set
+# CONFIG_ARCH_AST2500 is not set
+
+#
+# FLASH Chip Select
+#
+# CONFIG_AST_CS0_NOR is not set
+# CONFIG_AST_CS0_NAND is not set
+# CONFIG_AST_CS0_SPI is not set
+CONFIG_AST_CS0_NONE=y
+# CONFIG_AST_CS1_NOR is not set
+# CONFIG_AST_CS1_NAND is not set
+# CONFIG_AST_CS1_SPI is not set
+CONFIG_AST_CS1_NONE=y
+# CONFIG_AST_CS2_NOR is not set
+# CONFIG_AST_CS2_NAND is not set
+CONFIG_AST_CS2_SPI=y
+# CONFIG_AST_CS2_NONE is not set
+# CONFIG_AST_CS3_NOR is not set
+# CONFIG_AST_CS3_NAND is not set
+# CONFIG_AST_CS3_SPI is not set
+CONFIG_AST_CS3_NONE=y
+# CONFIG_AST_CS4_NOR is not set
+# CONFIG_AST_CS4_NAND is not set
+# CONFIG_AST_CS4_SPI is not set
+CONFIG_AST_CS4_NONE=y
+# CONFIG_ARCH_AST1070 is not set
+# CONFIG_AST_SCU_LOCK is not set
+# CONFIG_WEDGE is not set
+# CONFIG_WEDGE100 is not set
+# CONFIG_YOSEMITE is not set
+# CONFIG_FBPLATFORM1 is not set
+CONFIG_ASUSPLATFORM=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+CONFIG_PLAT_ASPEED=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=y
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=m
+CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
+# CONFIG_MTD_DATAFLASH_OTP is not set
+CONFIG_MTD_M25P80=y
+CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_RD_BZIP2 is not set
+CONFIG_RD_LZMA=y
+CONFIG_RD_GZIP=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+CONFIG_LXT_PHY=y
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+CONFIG_REALTEK_PHY=y
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_ASPEEDMAC=y
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_SERIAL=y
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_AMBAKMI is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_AST_DMA_UART is not set
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+# CONFIG_SERIAL_AMBA_PL011 is not set
+# CONFIG_SERIAL_AST is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_AST_MISC=y
+# CONFIG_AST_VIDEO is not set
+# CONFIG_ADC_CAT9883 is not set
+# CONFIG_AST_SPI_BIOS is not set
+CONFIG_AST_PECI=y
+# CONFIG_AST_KCS is not set
+# CONFIG_AST_GPIO is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_NVRAM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_AST=y
+CONFIG_AST_I2C_SLAVE_MODE=y
+CONFIG_AST_I2C_SLAVE_EEPROM=y
+# CONFIG_AST_I2C_SLAVE_RDWR is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+CONFIG_AT24=m
+# CONFIG_SENSORS_EEPROM is not set
+CONFIG_SENSORS_PCF8574=m
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_AST is not set
+# CONFIG_SPI_FMC is not set
+CONFIG_SPI_BITBANG=y
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_AT25=m
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+CONFIG_SENSORS_LM75=m
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+CONFIG_SENSORS_MAX127=m
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+CONFIG_SENSORS_ADS7828=m
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_AST_ADC is not set
+CONFIG_SENSORS_AST_PWM_FAN=y
+CONFIG_SENSORS_FB_PANTHER_PLUS=m
+CONFIG_PMBUS=m
+CONFIG_SENSORS_PMBUS=m
+CONFIG_SENSORS_ADM1275=m
+# CONFIG_SENSORS_LM25066 is not set
+# CONFIG_SENSORS_LTC2978 is not set
+# CONFIG_SENSORS_MAX16064 is not set
+# CONFIG_SENSORS_MAX34440 is not set
+# CONFIG_SENSORS_MAX8688 is not set
+CONFIG_SENSORS_PFE1100=m
+CONFIG_SENSORS_PFE3000=m
+# CONFIG_SENSORS_UCD9000 is not set
+# CONFIG_SENSORS_UCD9200 is not set
+# CONFIG_SENSORS_ZL6100 is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AST_WATCHDOG=y
+# CONFIG_AST_WATCHDOG_REARM_DUAL_BOOT is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_ARMCLCD is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_AST is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=m
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# AST USB Drivers
+#
+# CONFIG_AST_USB_UHCI_HCD is not set
+# CONFIG_AST_USB_UHCI_MULTIPORT_1 is not set
+# CONFIG_AST_USB_UHCI_MULTIPORT_2 is not set
+# CONFIG_AST_USB_UHCI_MULTIPORT_4 is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+CONFIG_USB_GADGET_ASPEED_AST=y
+CONFIG_USB_ASPEED_AST=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PL030 is not set
+# CONFIG_RTC_DRV_PL031 is not set
+CONFIG_RTC_DRV_ASPEED=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/meta-raptor/meta-asus/recipes-kernel/linux/linux-aspeed_2.6%.bbappend b/meta-raptor/meta-asus/recipes-kernel/linux/linux-aspeed_2.6%.bbappend
new file mode 100644
index 0000000..164e42f
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-kernel/linux/linux-aspeed_2.6%.bbappend
@@ -0,0 +1,8 @@
+LINUX_VERSION_EXTENSION = "-asus"
+
+COMPATIBLE_MACHINE = "asus"
+
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+SRC_URI += "file://defconfig \
+           "
diff --git a/meta-raptor/meta-asus/recipes-utils/lm_sensors/files/asus.conf b/meta-raptor/meta-asus/recipes-utils/lm_sensors/files/asus.conf
new file mode 100644
index 0000000..770d343
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-utils/lm_sensors/files/asus.conf
@@ -0,0 +1,78 @@
+
+bus "i2c-3" "ast_i2c.3"
+
+bus "i2c-4" "ast_i2c.4"
+
+bus "i2c-8" "ast_i2c.8"
+
+chip "tmp75-i2c-3-48"
+     label temp1 "Outlet Middle Temp"
+     set temp1_max 70
+     set temp1_max_hyst 60
+
+chip "tmp75-i2c-3-49"
+     label temp1 "Inlet Middle Temp"
+     set temp1_max 70
+     set temp1_max_hyst 60
+
+chip "tmp75-i2c-3-4a"
+     label temp1 "Inlet Left Temp"
+     set temp1_max 70
+     set temp1_max_hyst 60
+
+chip "tmp75-i2c-3-4b"
+     label temp1 "Switch Temp"
+     set temp1_max 70
+     set temp1_max_hyst 60
+
+chip "tmp75-i2c-3-4c"
+     label temp1 "Inlet Right Temp"
+     set temp1_max 70
+     set temp1_max_hyst 60
+
+chip "tmp75-i2c-8-48"
+     label temp1 "Outlet Right Temp"
+     set temp1_max 70
+     set temp1_max_hyst 60
+
+chip "tmp75-i2c-8-49"
+     label temp1 "Outlet Left Temp"
+     set temp1_max 70
+     set temp1_max_hyst 60
+
+chip "fancpld-i2c-8-33"
+     label fan1 "Fan 1 front"
+     label fan2 "Fan 1 rear"
+     label fan3 "Fan 2 front"
+     label fan4 "Fan 2 rear"
+     label fan5 "Fan 3 front"
+     label fan6 "Fan 3 rear"
+     label fan7 "Fan 4 front"
+     label fan8 "Fan 4 rear"
+     label fan9 "Fan 5 front"
+     label fan10 "Fan 5 rear"
+
+chip "fb_panther_plus-*"
+     label temp1 "CPU Temp"
+     label temp2 "DIMM0 Temp"
+     ignore temp3
+     ignore temp4
+     ignore temp5
+
+chip "ast_adc-isa-0000"
+     ignore in0
+     ignore in1
+     ignore in2
+     ignore in3
+     ignore in4
+     label in5 "+1 Core Voltage"
+     label in6 "+1 Analog Voltage"
+     label in7 "+5 Voltage"
+     label in8 "+3.3 Voltage"
+     label in9 "+2.5 Voltage"
+     ignore in10
+     ignore in11
+     ignore in12
+     ignore in13
+     ignore in14
+     ignore in15
diff --git a/meta-raptor/meta-asus/recipes-utils/lm_sensors/lmsensors_%.bbappend b/meta-raptor/meta-asus/recipes-utils/lm_sensors/lmsensors_%.bbappend
new file mode 100644
index 0000000..b53ed62
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-utils/lm_sensors/lmsensors_%.bbappend
@@ -0,0 +1,10 @@
+
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+SRC_URI += "file://asus.conf \
+           "
+
+do_install_board_config() {
+    install -d ${D}${sysconfdir}/sensors.d
+    install -m 644 ../asus.conf ${D}${sysconfdir}/sensors.d/asus.conf
+}
diff --git a/meta-raptor/meta-asus/recipes-utils/openbmc-gpio/files/asus_gpio_parse.py b/meta-raptor/meta-asus/recipes-utils/openbmc-gpio/files/asus_gpio_parse.py
new file mode 100644
index 0000000..5199389
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-utils/openbmc-gpio/files/asus_gpio_parse.py
@@ -0,0 +1,102 @@
+#!/usr/bin/python -tt
+# Copyright 2015-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+from __future__ import absolute_import
+from __future__ import division
+from __future__ import print_function
+from __future__ import unicode_literals
+
+import argparse
+import csv
+import logging
+import re
+import sys
+
+
+GPIO_SYMBOL = 'BoardGPIO'
+
+
+class CsvReader:
+    '''
+    A class for parsing the CSV files containing the board GPIO config
+    '''
+    def __init__(self, path):
+        self.path = path
+
+        fileobj = open(path, 'r')
+        self.reader = csv.reader(fileobj, delimiter=b',', quotechar=b'"')
+
+    def next(self):
+        try:
+            line = self.reader.next()
+        except StopIteration:
+            return None
+        return line
+
+
+class ASUSGPIO(object):
+    def __init__(self, data):
+        self.data = data
+        self.gpios = {}
+        self.names = set()
+
+    def parse(self):
+        while True:
+            line = self.data.next()
+            if line is None:
+                break
+
+            logging.debug('Parsing line: %s' % line)
+
+            if len(line) < 4:
+                logging.error('No enough fields in "%s". Skip!' % line)
+                continue
+
+            gpio = None
+            for part in line[1].split('_'):
+                if part.startswith('GPIO'):
+                    gpio = part
+                    break
+            if gpio is None:
+                logging.error('Cannot find GPIO file from "%s". Skip!' % line)
+                continue
+
+            name = line[3]
+            assert gpio not in self.gpios and name not in self.names
+            self.gpios[gpio] = name
+            self.names.add(name)
+
+    def print(self, out):
+        for gpio in sorted(self.gpios):
+            out.write('    %s(\'%s\', \'%s\'),\n'
+                      % (GPIO_SYMBOL, gpio, self.gpios[gpio]))
+
+
+def main():
+    ap = argparse.ArgumentParser()
+    ap.add_argument('data', help='The GPIO data file')
+    args = ap.parse_args()
+
+    logging.basicConfig(level=logging.INFO, format='%(asctime)s: %(message)s')
+
+    gpio = ASUSGPIO(CsvReader(args.data))
+    gpio.parse()
+    gpio.print(sys.stdout)
+
+
+rc = main()
+sys.exit(rc)
diff --git a/meta-raptor/meta-asus/recipes-utils/openbmc-gpio/files/board_gpio_rev_table.py b/meta-raptor/meta-asus/recipes-utils/openbmc-gpio/files/board_gpio_rev_table.py
new file mode 100644
index 0000000..9b830b4
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-utils/openbmc-gpio/files/board_gpio_rev_table.py
@@ -0,0 +1,33 @@
+# Copyright 2015-present Facebook. All rights reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+from __future__ import absolute_import
+from __future__ import division
+from __future__ import print_function
+from __future__ import unicode_literals
+
+from openbmc_gpio_table import BoardGPIO
+
+# The fallowing table is generated using:
+# python asus_gpio_parser.py data/asus-BMC-gpio.csv
+# DO NOT MODIFY THE TABLE!!!
+# Manual modification will be overridden!!!
+
+board_gpio_rev_table = [
+    BoardGPIO('GPIOY0', 'BOARD_REV_ID0'),
+    BoardGPIO('GPIOY1', 'BOARD_REV_ID1'),
+    BoardGPIO('GPIOY2', 'BOARD_REV_ID2'),
+]
diff --git a/meta-raptor/meta-asus/recipes-utils/openbmc-gpio/files/board_gpio_table_v1.py b/meta-raptor/meta-asus/recipes-utils/openbmc-gpio/files/board_gpio_table_v1.py
new file mode 100644
index 0000000..9438c0b
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-utils/openbmc-gpio/files/board_gpio_table_v1.py
@@ -0,0 +1,44 @@
+# Copyright 2017 Raptor Engineering, LLC
+# Copyright 2015-present Facebook. All rights reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+from __future__ import absolute_import
+from __future__ import division
+from __future__ import print_function
+from __future__ import unicode_literals
+
+from openbmc_gpio_table import BoardGPIO
+
+
+# The fallowing table is generated using:
+# python asus_gpio_parser.py data/asus-BMC-GPIO.csv
+# DO NOT MODIFY THE TABLE!!!
+# Manual modification will be overridden!!!
+
+board_gpio_table_v1 = [
+    BoardGPIO('GPIOA4', 'ASUS_BMC_CTL_LOCKOUT_N'),
+    BoardGPIO('GPIOB1', 'CTL_REQ_POWERUP_N'),
+    BoardGPIO('GPIOB6', 'CTL_REQ_RESET_N'),
+    BoardGPIO('GPIOE1', 'LED_STA_BMC_N'),
+    BoardGPIO('GPIOE2', 'LED_ERR_CPU2_N'),
+    BoardGPIO('GPIOE3', 'LED_ERR_CPU1_N'),
+    BoardGPIO('GPIOF0', 'CTL_REQ_POWERDOWN_N'),
+    BoardGPIO('GPIOF4', 'CTL_REQ_SPD_MUX_S1'),
+    BoardGPIO('GPIOF5', 'CTL_REQ_SPD_MUX_S0'),
+    BoardGPIO('GPIOG0', 'LED_STA_LOC_N'),
+    BoardGPIO('GPIOG1', 'USR_SW_LOC_N'),
+    BoardGPIO('GPIOH2', 'STA_LINE_POWER'),
+]
diff --git a/meta-raptor/meta-asus/recipes-utils/openbmc-gpio/files/data/asus-BMC-GPIO.csv b/meta-raptor/meta-asus/recipes-utils/openbmc-gpio/files/data/asus-BMC-GPIO.csv
new file mode 100644
index 0000000..b2027ea
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-utils/openbmc-gpio/files/data/asus-BMC-GPIO.csv
@@ -0,0 +1,12 @@
+D11,GPIOA4_PHYLINK,Out,ASUS_BMC_CTL_LOCKOUT_N,"Lock out BMC access to board controls.  Active low"
+A11,GPIOB1_FLBUSY#,Out,CTL_REQ_POWERUP_N,"Engage mainboard power.  Active low"
+D9,GPIOB6_VBDO,Out,CTL_REQ_RESET_N,"Reset mainboard.  Active low"
+V4,GPIOF0_VP8,Out,CTL_REQ_POWERDOWN_N,"Forcibly power off mainboard.  Active low"
+W4,GPIOF4_VP12,Out,CTL_REQ_SPD_MUX_S1,"SPD mux pin S1"
+W3,GPIOF5_VP13,Out,CTL_REQ_SPD_MUX_S0,"SPD mux pin S0"
+T4,GPIOE3_VP3,Out,LED_ERR_CPU1_N,"CPU1 error indicator"
+R1,GPIOE2_VP2,Out,LED_ERR_CPU2_N,"CPU2 error indicator"
+R2,GPIOE1_VP1,Out,LED_STA_BMC_N,"BMC status LED"
+Y4,GPIOG0_VP16,Out,LED_STA_LOC_N,"BMC locator LED"
+Y3,GPIOG1_VP17,In,USR_SW_LOC_N,"BMC locator switch"
+A12,GPIOH2_SDA7,In,STA_LINE_POWER,"Mainboard power status.  1 = power on, 0= power off.  (I2C bus power)"
\ No newline at end of file
diff --git a/meta-raptor/meta-asus/recipes-utils/openbmc-gpio/files/openbmc_gpio_setup.py b/meta-raptor/meta-asus/recipes-utils/openbmc-gpio/files/openbmc_gpio_setup.py
new file mode 100644
index 0000000..56beefe
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-utils/openbmc-gpio/files/openbmc_gpio_setup.py
@@ -0,0 +1,42 @@
+#!/usr/bin/python -tt
+# Copyright 2017 Raptor Engineering, LLC
+# Copyright 2015-present Facebook. All rights reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+from __future__ import absolute_import
+from __future__ import division
+from __future__ import print_function
+from __future__ import unicode_literals
+
+from board_gpio_table_v1 import board_gpio_table_v1
+from soc_gpio_table import soc_gpio_table
+from openbmc_gpio_table import setup_board_gpio
+from soc_gpio import soc_get_register
+
+import openbmc_gpio
+import sys
+
+def main():
+    print('Setting up GPIOs ... ', end='')
+    sys.stdout.flush()
+    openbmc_gpio.setup_shadow()
+    setup_board_gpio(soc_gpio_table, board_gpio_table_v1)
+    print('Done')
+    sys.stdout.flush()
+    return 0
+
+if __name__ == '__main__':
+    sys.exit(main())
diff --git a/meta-raptor/meta-asus/recipes-utils/openbmc-gpio/files/setup_board.py b/meta-raptor/meta-asus/recipes-utils/openbmc-gpio/files/setup_board.py
new file mode 100644
index 0000000..cc35824
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-utils/openbmc-gpio/files/setup_board.py
@@ -0,0 +1,21 @@
+# Copyright 2017 Raptor Engineering, LLC
+# Copyright 2015-present Facebook. All rights reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+
+board_py_modules=[
+    'board_gpio_table_v1',
+]
diff --git a/meta-raptor/meta-asus/recipes-utils/openbmc-gpio/openbmc-gpio_%.bbappend b/meta-raptor/meta-asus/recipes-utils/openbmc-gpio/openbmc-gpio_%.bbappend
new file mode 100644
index 0000000..dbf34f4
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-utils/openbmc-gpio/openbmc-gpio_%.bbappend
@@ -0,0 +1,35 @@
+# Copyright 2017 Raptor Engineering
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+SRC_URI += " \
+          file://board_gpio_table_v1.py \
+          file://board_gpio_rev_table.py \
+          file://openbmc_gpio_setup.py \
+          file://setup_board.py \
+          "
+OPENBMC_GPIO_SOC_TABLE = "ast2050_gpio_table.py"
+
+do_install_append() {
+     install -d ${D}${sysconfdir}/init.d
+     install -d ${D}${sysconfdir}/rcS.d
+     install -m 755 openbmc_gpio_setup.py ${D}${sysconfdir}/init.d/openbmc_gpio_setup.py
+     update-rc.d -r ${D} openbmc_gpio_setup.py start 59 S .
+}
+
+FILES_${PN} += "/usr/local/bin ${sysconfdir}"
diff --git a/meta-raptor/meta-asus/recipes-utils/openbmc-utils/files/COPYING b/meta-raptor/meta-asus/recipes-utils/openbmc-utils/files/COPYING
new file mode 100644
index 0000000..3912109
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-utils/openbmc-utils/files/COPYING
@@ -0,0 +1,340 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+                       51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.
diff --git a/meta-raptor/meta-asus/recipes-utils/openbmc-utils/files/asus_power.sh b/meta-raptor/meta-asus/recipes-utils/openbmc-utils/files/asus_power.sh
new file mode 100644
index 0000000..f61cf63
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-utils/openbmc-utils/files/asus_power.sh
@@ -0,0 +1,191 @@
+#!/bin/bash
+#
+# Copyright 2017 Raptor Engineering, LLC
+# Copyright 2015-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+. /usr/local/bin/openbmc-utils.sh
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin
+
+prog="$0"
+
+PWR_BTN_GPIO="BMC_PWR_BTN_OUT_N"
+PWR_SYSTEM_SYSFS="${SYSCPLD_SYSFS_DIR}/pwr_cyc_all_n"
+PWR_USRV_RST_SYSFS="${SYSCPLD_SYSFS_DIR}/usrv_rst_n"
+
+usage() {
+    echo "Usage: $prog <command> [command options]"
+    echo
+    echo "Commands:"
+    echo "  status: Get the current microserver power status"
+    echo
+    echo "  on: Power on microserver if not powered on already"
+    echo "    options:"
+    echo "      -f: Re-do power on sequence no matter if microserver has "
+    echo "          been powered on or not."
+    echo
+    echo "  off: Power off microserver ungracefully"
+    echo
+    echo "  reset: Power reset microserver ungracefully"
+    echo "    options:"
+    echo "      -s: Power reset whole wedge system ungracefully"
+    echo
+}
+
+do_status() {
+    echo -n "Mainboard power is "
+    if asus_is_us_on; then
+        echo "on"
+    else
+        echo "off"
+    fi
+    return 0
+}
+
+do_gpio_power_on() {
+    gpio_set CTL_REQ_POWERDOWN_N 1
+    gpio_set CTL_REQ_RESET_N 0
+    gpio_set CTL_REQ_POWERUP_N 0
+    sleep 1
+    gpio_set CTL_REQ_RESET_N 1
+    gpio_set CTL_REQ_POWERUP_N 1
+    return 0
+}
+
+do_on() {
+    local force opt ret
+    force=0
+    while getopts "f" opt; do
+        case $opt in
+            f)
+                force=1
+                ;;
+            *)
+                usage
+                exit -1
+                ;;
+
+        esac
+    done
+    echo -n "Power on mainboard ..."
+    if [ $force -eq 0 ]; then
+        # need to check if uS is on or not
+        if asus_is_us_on 10 "."; then
+            echo " Already on. Skip!"
+            return 1
+        fi
+    fi
+
+    # power on sequence
+    do_gpio_power_on
+    ret=$?
+    if [ $ret -eq 0 ]; then
+        echo " Done"
+    else
+        echo " Failed"
+    fi
+    return $ret
+}
+
+do_gpio_power_off() {
+    gpio_set CTL_REQ_RESET_N 1
+    gpio_set CTL_REQ_POWERUP_N 1
+    gpio_set CTL_REQ_POWERDOWN_N 0
+    sleep 1
+    gpio_set CTL_REQ_POWERDOWN_N 1
+    return 0
+}
+
+do_off() {
+    local ret
+    echo -n "Power off mainboard ..."
+    do_gpio_power_off
+    ret=$?
+    if [ $ret -eq 0 ]; then
+        echo " Done"
+    else
+        echo " Failed"
+    fi
+    return $ret
+}
+
+do_reset() {
+    local system opt pulse_us
+    system=0
+    while getopts "s" opt; do
+        case $opt in
+            s)
+                system=1
+                ;;
+            *)
+                usage
+                exit -1
+                ;;
+        esac
+    done
+    if [ $system -eq 1 ]; then
+        echo -n "Power reset whole system ..."
+        do_gpio_power_off
+        sleep 1
+        do_gpio_power_on
+    else
+        if ! asus_is_us_on; then
+            echo "Power resetting mainboard that is powered off has no effect."
+            echo "Use '$prog on' to power the mainboard on"
+            return -1
+        fi
+        echo -n "Power reset microserver ..."
+        gpio_set CTL_REQ_POWERDOWN_N 1
+        gpio_set CTL_REQ_RESET_N 0
+        gpio_set CTL_REQ_POWERUP_N 1
+        sleep 1
+        gpio_set CTL_REQ_RESET_N 1
+    fi
+    echo " Done"
+    return 0
+}
+
+if [ $# -lt 1 ]; then
+    usage
+    exit -1
+fi
+
+command="$1"
+shift
+
+case "$command" in
+    status)
+        do_status $@
+        ;;
+    on)
+        do_on $@
+        ;;
+    off)
+        do_off $@
+        ;;
+    reset)
+        do_reset $@
+        ;;
+    *)
+        usage
+        exit -1
+        ;;
+esac
+
+exit $?
diff --git a/meta-raptor/meta-asus/recipes-utils/openbmc-utils/files/asus_us_mac.sh b/meta-raptor/meta-asus/recipes-utils/openbmc-utils/files/asus_us_mac.sh
new file mode 100644
index 0000000..b819b6a
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-utils/openbmc-utils/files/asus_us_mac.sh
@@ -0,0 +1,34 @@
+#!/bin/bash
+#
+# Copyright 2017 Raptor Engineering, LLC
+# Copyright 2015-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+#
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin
+
+. /usr/local/bin/openbmc-utils.sh
+
+mac=$(fw_printenv ethaddr)
+
+if [ -n "$mac" -a "${mac/X/}" = "${mac}" ]; then
+    echo $mac
+    exit 0
+else
+    echo "Cannot determine BMC MAC" 1>&2
+    exit -1
+fi
diff --git a/meta-raptor/meta-asus/recipes-utils/openbmc-utils/files/board-utils.sh b/meta-raptor/meta-asus/recipes-utils/openbmc-utils/files/board-utils.sh
new file mode 100644
index 0000000..a43ad8b
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-utils/openbmc-utils/files/board-utils.sh
@@ -0,0 +1,45 @@
+# Copyright 2017 Raptor Engineering, LLC
+# Copyright 2015-present Facebook. All Rights Reserved.
+
+SLOT_ID=1
+
+asus_is_us_on() {
+    val=$(gpio_get STA_LINE_POWER)
+    if [ "$val" == "1" ]; then
+        return 0            # powered on
+    else
+        return 1
+    fi
+}
+
+asus_board_type() {
+    echo 'ASUS ASMB4 Platform'
+}
+
+asus_slot_id() {
+    printf "%d\n" $SLOT_ID
+}
+
+asus_board_rev() {
+    echo 0
+}
+
+# Should we enable OOB interface or not
+asus_should_enable_oob() {
+    # ASUS uses BMC MAC
+    return -1
+}
+
+asus_power_on_board() {
+    local val
+    val=$(asus_is_us_on)
+    if [[ "$val" == "1" ]]; then
+        # power on
+        gpio_set CTL_REQ_POWERDOWN_N 1
+        gpio_set CTL_REQ_RESET_N 0
+        gpio_set CTL_REQ_POWERUP_N 0
+        sleep 1
+        gpio_set CTL_REQ_RESET_N 1
+        gpio_set CTL_REQ_POWERUP_N 1
+    fi
+}
diff --git a/meta-raptor/meta-asus/recipes-utils/openbmc-utils/files/disable_watchdog.sh b/meta-raptor/meta-asus/recipes-utils/openbmc-utils/files/disable_watchdog.sh
new file mode 100644
index 0000000..07826d6
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-utils/openbmc-utils/files/disable_watchdog.sh
@@ -0,0 +1,6 @@
+#!/bin/sh
+
+. /usr/local/bin/openbmc-utils.sh
+
+# Disable the dual boot watch dog
+devmem_clear_bit 0x1e78502c 0
diff --git a/meta-raptor/meta-asus/recipes-utils/openbmc-utils/files/power-on.sh b/meta-raptor/meta-asus/recipes-utils/openbmc-utils/files/power-on.sh
new file mode 100644
index 0000000..3b313d4
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-utils/openbmc-utils/files/power-on.sh
@@ -0,0 +1,56 @@
+#!/bin/sh
+#
+# Copyright 2017 Raptor Engineering, LLC
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+
+### BEGIN INIT INFO
+# Provides:          power-on
+# Required-Start:
+# Required-Stop:
+# Default-Start:     S
+# Default-Stop:
+# Short-Description: Power on micro-server
+### END INIT INFO
+. /usr/local/bin/openbmc-utils.sh
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin
+
+# set power and reset lines high to prepare for power on sequence
+gpio_set CTL_REQ_POWERUP_N 1
+gpio_set CTL_REQ_POWERDOWN_N 1
+gpio_set CTL_REQ_RESET_N 1
+
+# release control lockout
+gpio_set ASUS_BMC_CTL_LOCKOUT_N 1
+
+# power up
+asus_power_on_board
+
+echo -n "Checking mainboard power status ... "
+if asus_is_us_on 10 "."; then
+    echo "on"
+    on=1
+else
+    echo "off"
+    on=0
+fi
+
+if [ $on -eq 0 ]; then
+    # Power on now
+    asus_power.sh on -f
+fi
diff --git a/meta-raptor/meta-asus/recipes-utils/openbmc-utils/openbmc-utils_%.bbappend b/meta-raptor/meta-asus/recipes-utils/openbmc-utils/openbmc-utils_%.bbappend
new file mode 100644
index 0000000..45aef73
--- /dev/null
+++ b/meta-raptor/meta-asus/recipes-utils/openbmc-utils/openbmc-utils_%.bbappend
@@ -0,0 +1,71 @@
+# Copyright 2015-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+SRC_URI += "file://disable_watchdog.sh \
+            file://board-utils.sh \
+           "
+
+OPENBMC_UTILS_FILES += " \
+    disable_watchdog.sh \
+    "
+
+DEPENDS_append = " update-rc.d-native"
+
+do_install_board() {
+    # for backward compatible, create /usr/local/fbpackages/utils/ast-functions
+    olddir="/usr/local/fbpackages/utils"
+    install -d ${D}${olddir}
+    ln -s "/usr/local/bin/openbmc-utils.sh" "${D}${olddir}/ast-functions"
+
+    # common lib and include files
+    install -d ${D}${includedir}/facebook
+    install -m 0644 src/include/i2c-dev.h ${D}${includedir}/facebook/i2c-dev.h
+
+    # init
+    install -d ${D}${sysconfdir}/init.d
+    install -d ${D}${sysconfdir}/rcS.d
+
+    # the script to mount /mnt/data
+    install -m 0755 ${WORKDIR}/mount_data0.sh ${D}${sysconfdir}/init.d/mount_data0.sh
+    update-rc.d -r ${D} mount_data0.sh start 03 S .
+    install -m 0755 ${WORKDIR}/rc.early ${D}${sysconfdir}/init.d/rc.early
+    update-rc.d -r ${D} rc.early start 04 S .
+
+    # Initial GPIO setup and heartbeat monitor   
+    install -m 0755 ${WORKDIR}/setup-gpio.sh ${D}${sysconfdir}/init.d/setup-gpio.sh
+    update-rc.d -r ${D} setup-gpio.sh start 59 S .
+    install -m 0755 ${WORKDIR}/start_us_monitor.sh ${D}${sysconfdir}/init.d/start_us_monitor.sh
+    update-rc.d -r ${D} start_us_monitor.sh start 84 S .
+
+    # networking is done after rcS, any start level within rcS
+    # for mac fixup should work
+    install -m 755 eth0_mac_fixup.sh ${D}${sysconfdir}/init.d/eth0_mac_fixup.sh
+    update-rc.d -r ${D} eth0_mac_fixup.sh start 70 S .
+
+    install -m 755 power-on.sh ${D}${sysconfdir}/init.d/power-on.sh
+    update-rc.d -r ${D} power-on.sh start 85 S .
+
+    install -m 0755 ${WORKDIR}/rc.local ${D}${sysconfdir}/init.d/rc.local
+    update-rc.d -r ${D} rc.local start 99 2 3 4 5 .
+
+    install -m 0755 ${WORKDIR}/disable_watchdog.sh ${D}${sysconfdir}/init.d/disable_watchdog.sh
+    update-rc.d -r ${D} disable_watchdog.sh start 99 2 3 4 5 .
+}
+
+FILES_${PN} += "${sysconfdir}"