diff options
Diffstat (limited to 'uc_str912/prj_test_lcd')
25 files changed, 0 insertions, 6141 deletions
diff --git a/uc_str912/prj_test_lcd/Makefile b/uc_str912/prj_test_lcd/Makefile deleted file mode 100644 index 9bfbf4e..0000000 --- a/uc_str912/prj_test_lcd/Makefile +++ /dev/null @@ -1,496 +0,0 @@ -# Hey Emacs, this is a -*- makefile -*-
-#
-# WinARM template makefile
-# by Giacomo Fazio and Antonio Nasca, Catania, Italy
-# <giacomofazio@gmail.com>
-# <antodani.nasca@hotmail.it>
-#
-# based on the WinARM template makefile written by Martin Thomas
-# Released to the Public Domain
-# Please read the make user manual!
-#
-#
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make program = Download the hex file to the device
-#
-# (TODO: make filename.s = Just compile filename.c into the assembler code only)
-#
-# To rebuild project do "make clean" then "make all".
-# Toolchain prefix (i.e arm-elf -> arm-elf-gcc.exe)
-#TCHAIN = arm-elf
-TCHAIN = arm-none-eabi
-
-USE_THUMB_MODE = YES
-#USE_THUMB_MODE = NO
-
-# MCU name and submodel
-MCU = arm966e-s
-SUBMDL = STR91x
-
-## Create ROM-Image
-RUN_MODE=ROM_RUN
-## Create RAM-Image
-#RUN_MODE=RAM_RUN
-
-## not supported in this example:
-## Exception-Vector placement only supported for "ROM_RUN"
-## (placement settings ignored when using "RAM_RUN")
-## - Exception vectors in ROM:
-#VECTOR_LOCATION=VECTORS_IN_ROM
-## - Exception vectors in RAM:
-#VECTOR_LOCATION=VECTORS_IN_RAM
-
-
-# Target file name (without extension).
-TARGET = lcd
-
-# List C source files here. (C dependencies are automatically generated.)
-# use file-extension c for "c-only"-files
-SRC = src/$(TARGET).c str91x_lib/91x_scu.c str91x_lib/91x_gpio.c src/lcd_lib_91x.c
-
-# List C source files here which must be compiled in ARM-Mode.
-# use file-extension c for "c-only"-files
-SRCARM = src/vectors.c
-# thumb is possible too for vectors.c - keep ARM, TODO: profile
-
-# List C++ source files here.
-# use file-extension cpp for C++-files (use extension .cpp)
-CPPSRC =
-
-# List C++ source files here which must be compiled in ARM-Mode.
-# use file-extension cpp for C++-files (use extension .cpp)
-#CPPSRCARM = $(TARGET).cpp
-CPPSRCARM =
-
-# List Assembler source files here.
-# Make them always end in a capital .S. Files ending in a lowercase .s
-# will not be considered source files but generated files (assembler
-# output from the compiler), and will be deleted upon "make clean"!
-# Even though the DOS/Win* filesystem matches both .s and .S the same,
-# it will preserve the spelling of the filenames, and gcc itself does
-# care about how the name is spelled on its command-line.
-ASRC =
-
-# List Assembler source files here which must be assembled in ARM-Mode..
-ASRCARM = src/vector.S src/startup.S
-
-# Path to Linker-Scripts
-LINKERSCRIPTPATH = .
-
-## Output format. (can be ihex or binary or both)
-## (binary i.e. for openocd and SAM-BA, hex i.e. for lpc21isp and uVision)
-#FORMAT = ihex
-#FORMAT = binary
-FORMAT = both
-
-# Optimization level, can be [0, 1, 2, 3, s].
-# 0 = turn off optimization. s = optimize for size.
-# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-#OPT = s
-OPT = 0
-
-## Using the Atmel AT91_lib produces warning with
-## the default warning-levels.
-## yes - disable these warnings; no - keep default settings
-#AT91LIBNOWARN = yes
-AT91LIBNOWARN = no
-
-# Debugging format.
-# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
-# AVR (extended) COFF requires stabs, plus an avr-objcopy run.
-#DEBUG = stabs
-DEBUG = dwarf-2
-
-# List any extra directories to look for include files here.
-# Each directory must be seperated by a space.
-EXTRAINCDIRS = ./include ./str91x_lib/include
-
-# List any extra directories to look for library files here.
-# Each directory must be seperated by a space.
-#EXTRA_LIBDIRS = ../arm7_efsl_0_2_4
-EXTRA_LIBDIRS = ./str91x_lib
-
-
-# Compiler flag to set the C Standard level.
-# c89 - "ANSI" C
-# gnu89 - c89 plus GCC extensions
-# c99 - ISO C99 standard (not yet fully implemented)
-# gnu99 - c99 plus GCC extensions
-CSTANDARD = -std=gnu99
-
-# Place -D or -U options for C here
-CDEFS = -D$(RUN_MODE)
-
-# Place -I options here
-CINCS =
-
-# Place -D or -U options for ASM here
-ADEFS = -D$(RUN_MODE)
-
-ifdef VECTOR_LOCATION
-CDEFS += -D$(VECTOR_LOCATION)
-ADEFS += -D$(VECTOR_LOCATION)
-endif
-
-CDEFS += -D__WinARM__ -D__WINARMSUBMDL_$(SUBMDL)__
-ADEFS += -D__WinARM__ -D__WINARMSUBMDL_$(SUBMDL)__
-
-# Compiler flags.
-
-ifeq ($(USE_THUMB_MODE),YES)
-THUMB = -mthumb
-THUMB_IW = -mthumb-interwork
-else
-THUMB =
-THUMB_IW =
-endif
-
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-#
-# Flags for C and C++ (arm-elf-gcc/arm-elf-g++)
-CFLAGS = -g$(DEBUG)
-CFLAGS += $(CDEFS) $(CINCS)
-CFLAGS += -O$(OPT)
-CFLAGS += -Wall -Wcast-align -Wimplicit
-CFLAGS += -Wpointer-arith -Wswitch
-CFLAGS += -ffunction-sections -fdata-sections
-CFLAGS += -Wredundant-decls -Wreturn-type -Wshadow -Wunused
-CFLAGS += -Wa,-adhlns=$(subst $(suffix $<),.lst,$<)
-CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-
-# flags only for C
-CONLYFLAGS += -Wnested-externs
-CONLYFLAGS += $(CSTANDARD)
-
-ifneq ($(AT91LIBNOWARN),yes)
-#AT91-lib warnings with:
-CFLAGS += -Wcast-qual
-CONLYFLAGS += -Wmissing-prototypes
-CONLYFLAGS += -Wstrict-prototypes
-CONLYFLAGS += -Wmissing-declarations
-endif
-
-# flags only for C++ (arm-elf-g++)
-# CPPFLAGS = -fno-rtti -fno-exceptions
-CPPFLAGS =
-
-# Assembler flags.
-# -Wa,...: tell GCC to pass this to the assembler.
-# -ahlns: create listing
-# -g$(DEBUG): have the assembler create line number information
-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:.S=.lst),-g$(DEBUG)
-
-
-#Additional libraries.
-
-# Extra libraries
-# Each library-name must be seperated by a space.
-# To add libxyz.a, libabc.a and libefsl.a:
-# EXTRA_LIBS = xyz abc efsl
-#EXTRA_LIBS = efsl
-EXTRA_LIBS =
-#STR91x_lib
-
-#Support for newlibc-lpc (file: libnewlibc-lpc.a)
-#NEWLIBLPC = -lnewlib-lpc
-
-MATH_LIB = -lm
-
-# CPLUSPLUS_LIB = -lstdc++
-
-
-# Linker flags.
-# -Wl,...: tell GCC to pass this to linker.
-# -Map: create map file
-# --cref: add cross reference to map file
-LDFLAGS = -nostartfiles -Wl,-Map=$(TARGET).map,--cref,--gc-sections,--no-warn-mismatch
-LDFLAGS += -lc
-LDFLAGS += $(NEWLIBLPC) $(MATH_LIB)
-LDFLAGS += -lc -lgcc
-LDFLAGS += $(CPLUSPLUS_LIB)
-LDFLAGS += $(patsubst %,-L%,$(EXTRA_LIBDIRS))
-LDFLAGS += $(patsubst %,-l%,$(EXTRA_LIBS))
-
-# Set Linker-Script Depending On Selected Memory and Controller
-ifeq ($(RUN_MODE),RAM_RUN)
-LDFLAGS +=-T$(LINKERSCRIPTPATH)/$(SUBMDL)-RAM.ld
-else
-LDFLAGS +=-T$(LINKERSCRIPTPATH)/$(SUBMDL)-ROM.ld
-endif
-
-
-# Define directories, if needed.
-## DIRARM = c:/WinARM/
-## DIRARMBIN = $(DIRAVR)/bin/
-## DIRAVRUTILS = $(DIRAVR)/utils/bin/
-
-# Define programs and commands.
-SHELL = sh
-CC = $(TCHAIN)-gcc
-CPP = $(TCHAIN)-g++
-AR = $(TCHAIN)-ar
-OBJCOPY = $(TCHAIN)-objcopy
-OBJDUMP = $(TCHAIN)-objdump
-SIZE = $(TCHAIN)-size
-NM = $(TCHAIN)-nm
-REMOVE = rm -f
-REMOVEDIR = rm -f -r
-COPY = cp
-
-# Define Messages
-# English
-MSG_ERRORS_NONE = Errors: none
-MSG_BEGIN = "-------- begin (mode: $(RUN_MODE)) --------"
-MSG_END = -------- end --------
-MSG_SIZE_BEFORE = Size before:
-MSG_SIZE_AFTER = Size after:
-MSG_FLASH = Creating load file for Flash:
-MSG_EXTENDED_LISTING = Creating Extended Listing:
-MSG_SYMBOL_TABLE = Creating Symbol Table:
-MSG_LINKING = Linking:
-MSG_COMPILING = Compiling C:
-MSG_COMPILING_ARM = "Compiling C (ARM-only):"
-MSG_COMPILINGCPP = Compiling C++:
-MSG_COMPILINGCPP_ARM = "Compiling C++ (ARM-only):"
-MSG_ASSEMBLING = Assembling:
-MSG_ASSEMBLING_ARM = "Assembling (ARM-only):"
-MSG_CLEANING = Cleaning project:
-MSG_FORMATERROR = Can not handle output-format
-MSG_LPC21_RESETREMINDER = You may have to bring the target in bootloader-mode now.
-
-# Define all object files.
-COBJ = $(SRC:.c=.o)
-AOBJ = $(ASRC:.S=.o)
-COBJARM = $(SRCARM:.c=.o)
-AOBJARM = $(ASRCARM:.S=.o)
-CPPOBJ = $(CPPSRC:.cpp=.o)
-CPPOBJARM = $(CPPSRCARM:.cpp=.o)
-
-# Define all listing files.
-LST = $(ASRC:.S=.lst) $(ASRCARM:.S=.lst) $(SRC:.c=.lst) $(SRCARM:.c=.lst)
-LST += $(CPPSRC:.cpp=.lst) $(CPPSRCARM:.cpp=.lst)
-
-# Compiler flags to generate dependency files.
-### GENDEPFLAGS = -Wp,-M,-MP,-MT,$(*F).o,-MF,.dep/$(@F).d
-GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
-
-# Combine all necessary flags and optional flags.
-# Add target processor to flags.
-ALL_CFLAGS = -mcpu=$(MCU) $(THUMB_IW) -I. $(CFLAGS) $(GENDEPFLAGS)
-ALL_ASFLAGS = -mcpu=$(MCU) $(THUMB_IW) -I. -x assembler-with-cpp $(ASFLAGS)
-
-
-# Default target.
-all: begin gccversion sizebefore build sizeafter finished end
-
-ifeq ($(FORMAT),ihex)
-build: elf hex lss sym
-hex: $(TARGET).hex
-IMGEXT=hex
-else
-ifeq ($(FORMAT),binary)
-build: elf bin lss sym
-bin: $(TARGET).bin
-IMGEXT=bin
-else
-ifeq ($(FORMAT),both)
-build: elf hex bin lss sym
-hex: $(TARGET).hex
-bin: $(TARGET).bin
-else
-$(error "$(MSG_FORMATERROR) $(FORMAT)")
-endif
-endif
-endif
-
-elf: $(TARGET).elf
-lss: $(TARGET).lss
-sym: $(TARGET).sym
-
-# Eye candy.
-begin:
- @echo
- @echo $(MSG_BEGIN)
-
-finished:
- @echo $(MSG_ERRORS_NONE)
-
-end:
- @echo $(MSG_END)
- @echo
-
-
-# Display size of file.
-HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
-ELFSIZE = $(SIZE) -A $(TARGET).elf
-sizebefore:
- @if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi
-
-sizeafter:
- @if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
-
-
-# Display compiler version information.
-gccversion :
- @$(CC) --version
-
-# FLASH Programming with OPENOCD
-
-# specify the directory where openocd executable resides (openocd-ftd2xx.exe or openocd-pp.exe)
-# Note: you may have to adjust this if a newer version of YAGARTO has been downloaded
-OPENOCD_DIR = 'c:\Programmi\openocd\bin\'
-
-# specify OpenOCD executable (pp is for the wiggler, ftd2xx is for the USB debugger)
-OPENOCD = $(OPENOCD_DIR)openocd-pp.exe
-#OPENOCD = $(OPENOCD_DIR)openocd-ftd2xx.exe
-
-# specify OpenOCD configuration file (pick the one for your device)
-#OPENOCD_CFG = C:\openocd-configs\str91x-configs\str91x_signalyzer-flash-program.cfg
-#OPENOCD_CFG = C:\openocd-configs\str91x-configs\str91x_jtagkey-flash-program.cfg
-#OPENOCD_CFG = C:\openocd-configs\str91x-configs\str91x_armusbocd-flash-program.cfg
-OPENOCD_CFG = C:\openocd-configs\str91x-configs\str91x_pp-flash-program.cfg
-
-program:
- @echo
- @echo "Flash Programming with OpenOCD..."
- $(OPENOCD) -f $(OPENOCD_CFG)
- @echo
- @echo
- @echo "Flash Programming Finished."
-
-
-# Create final output file (.hex) from ELF output file.
-%.hex: %.elf
- @echo
- @echo $(MSG_FLASH) $@
- $(OBJCOPY) -O ihex $< $@
-
-# Create final output file (.bin) from ELF output file.
-%.bin: %.elf
- @echo
- @echo $(MSG_FLASH) $@
- $(OBJCOPY) -O binary $< $@
-
-
-# Create extended listing file from ELF output file.
-# testing: option -C
-%.lss: %.elf
- @echo
- @echo $(MSG_EXTENDED_LISTING) $@
- $(OBJDUMP) -h -S -C $< > $@
-
-
-# Create a symbol table from ELF output file.
-%.sym: %.elf
- @echo
- @echo $(MSG_SYMBOL_TABLE) $@
- $(NM) -n $< > $@
-
-
-# Link: create ELF output file from object files.
-.SECONDARY : $(TARGET).elf
-.PRECIOUS : $(AOBJARM) $(AOBJ) $(COBJARM) $(COBJ) $(CPPOBJ) $(CPPOBJARM)
-%.elf: $(AOBJARM) $(AOBJ) $(COBJARM) $(COBJ) $(CPPOBJ) $(CPPOBJARM)
- @echo
- @echo $(MSG_LINKING) $@
- $(CC) $(THUMB) $(ALL_CFLAGS) $(AOBJARM) $(AOBJ) $(COBJARM) $(COBJ) $(CPPOBJ) $(CPPOBJARM) --output $@ $(LDFLAGS)
-# $(CPP) $(THUMB) $(ALL_CFLAGS) $(AOBJARM) $(AOBJ) $(COBJARM) $(COBJ) $(CPPOBJ) $(CPPOBJARM) --output $@ $(LDFLAGS)
-
-# Compile: create object files from C source files. ARM/Thumb
-$(COBJ) : %.o : %.c
- @echo
- @echo $(MSG_COMPILING) $<
- $(CC) -c $(THUMB) $(ALL_CFLAGS) $(CONLYFLAGS) $< -o $@
-
-# Compile: create object files from C source files. ARM-only
-$(COBJARM) : %.o : %.c
- @echo
- @echo $(MSG_COMPILING_ARM) $<
- $(CC) -c $(ALL_CFLAGS) $(CONLYFLAGS) $< -o $@
-
-# Compile: create object files from C++ source files. ARM/Thumb
-$(CPPOBJ) : %.o : %.cpp
- @echo
- @echo $(MSG_COMPILINGCPP) $<
- $(CPP) -c $(THUMB) $(ALL_CFLAGS) $(CPPFLAGS) $< -o $@
-
-# Compile: create object files from C++ source files. ARM-only
-$(CPPOBJARM) : %.o : %.cpp
- @echo
- @echo $(MSG_COMPILINGCPP_ARM) $<
- $(CPP) -c $(ALL_CFLAGS) $(CPPFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C source files. ARM/Thumb
-## does not work - TODO - hints welcome
-##$(COBJ) : %.s : %.c
-## $(CC) $(THUMB) -S $(ALL_CFLAGS) $< -o $@
-
-
-# Assemble: create object files from assembler source files. ARM/Thumb
-$(AOBJ) : %.o : %.S
- @echo
- @echo $(MSG_ASSEMBLING) $<
- $(CC) -c $(THUMB) $(ALL_ASFLAGS) $< -o $@
-
-
-# Assemble: create object files from assembler source files. ARM-only
-$(AOBJARM) : %.o : %.S
- @echo
- @echo $(MSG_ASSEMBLING_ARM) $<
- $(CC) -c $(ALL_ASFLAGS) $< -o $@
-
-
-# Target: clean project.
-clean: begin clean_list finished end
-
-
-clean_list :
- @echo
- @echo $(MSG_CLEANING)
- $(REMOVE) $(TARGET).hex
- $(REMOVE) $(TARGET).bin
- $(REMOVE) $(TARGET).obj
- $(REMOVE) $(TARGET).elf
- $(REMOVE) $(TARGET).map
- $(REMOVE) $(TARGET).obj
- $(REMOVE) $(TARGET).a90
- $(REMOVE) $(TARGET).sym
- $(REMOVE) $(TARGET).lnk
- $(REMOVE) $(TARGET).lss
- $(REMOVE) $(COBJ)
- $(REMOVE) $(CPPOBJ)
- $(REMOVE) $(AOBJ)
- $(REMOVE) $(COBJARM)
- $(REMOVE) $(CPPOBJARM)
- $(REMOVE) $(AOBJARM)
- $(REMOVE) $(LST)
- $(REMOVE) $(SRC:.c=.s)
- $(REMOVE) $(SRC:.c=.d)
- $(REMOVE) $(SRCARM:.c=.s)
- $(REMOVE) $(SRCARM:.c=.d)
- $(REMOVE) $(CPPSRC:.cpp=.s)
- $(REMOVE) $(CPPSRC:.cpp=.d)
- $(REMOVE) $(CPPSRCARM:.cpp=.s)
- $(REMOVE) $(CPPSRCARM:.cpp=.d)
- $(REMOVEDIR) .dep | exit 0
-
-
-# Include the dependency files.
--include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
-
-
-# Listing of phony targets.
-.PHONY : all begin finish end sizebefore sizeafter gccversion \
-build elf hex bin lss sym clean clean_list program
-
diff --git a/uc_str912/prj_test_lcd/STR91x-ROM.ld b/uc_str912/prj_test_lcd/STR91x-ROM.ld deleted file mode 100644 index ed2979b..0000000 --- a/uc_str912/prj_test_lcd/STR91x-ROM.ld +++ /dev/null @@ -1,221 +0,0 @@ -/***********************************************************************************
-* Copyright 2005 Anglia Design
-* This demo code and associated components are provided as is and has no warranty,
-* implied or otherwise. You are free to use/modify any of the provided
-* code at your own risk in your applications with the expressed limitation
-* of liability (see below)
-*
-* LIMITATION OF LIABILITY: ANGLIA OR ANGLIA DESIGNS SHALL NOT BE LIABLE FOR ANY
-* LOSS OF PROFITS, LOSS OF USE, LOSS OF DATA, INTERRUPTION OF BUSINESS, NOR FOR
-* INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND WHETHER UNDER
-* THIS AGREEMENT OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-*
-* Author : Spencer Oliver
-* Web : www.anglia-designs.com
-*
-***********************************************************************************/
-
-/* Stack Sizes */
-
- _STACKSIZE = 1024;
- _STACKSIZE_IRQ = 256;
- _STACKSIZE_FIQ = 256;
- _STACKSIZE_SVC = 0;
- _STACKSIZE_ABT = 0;
- _STACKSIZE_UND = 0;
- _HEAPSIZE = 1024;
-
-/* Memory Definitions */
-
-MEMORY
-{
- CODE (rx) : ORIGIN = 0x00000000, LENGTH = 0x00080000
- DATA (rw) : ORIGIN = 0x04000000, LENGTH = 0x00018000
-}
-
-/* Section Definitions */
-
-SECTIONS
-{
- /* first section is .text which is used for code */
-
- .text :
- {
- KEEP(*(.vectors))
- KEEP(*(.init))
- *(.text .text.*)
- *(.gnu.linkonce.t.*)
- *(.glue_7t .glue_7)
- KEEP(*(.fini))
- *(.gcc_except_table)
- } >CODE =0
- . = ALIGN(4);
-
- /* .ctors .dtors are used for c++ constructors/destructors */
-
- .ctors :
- {
- PROVIDE(__ctors_start__ = .);
- KEEP(*(SORT(.ctors.*)))
- KEEP(*(.ctors))
- PROVIDE(__ctors_end__ = .);
- } >CODE
-
- .dtors :
- {
- PROVIDE(__dtors_start__ = .);
- KEEP(*(SORT(.dtors.*)))
- KEEP(*(.dtors))
- PROVIDE(__dtors_end__ = .);
- } >CODE
-
- /* .rodata section which is used for read-only data (constants) */
-
- .rodata :
- {
- *(.rodata .rodata.*)
- *(.gnu.linkonce.r.*)
- } >CODE
- . = ALIGN(4);
-
- _etext = .;
- PROVIDE (etext = .);
-
- /* .data section which is used for initialized data */
-
- .data : AT (_etext)
- {
- __data_start = .;
- *(.data .data.*)
- *(.gnu.linkonce.d.*)
- SORT(CONSTRUCTORS)
- . = ALIGN(4);
- *(.fastrun .fastrun.*)
- } >DATA
- . = ALIGN(4);
-
- _edata = .;
- PROVIDE (edata = .);
-
- /* .bss section which is used for uninitialized data */
-
- .bss :
- {
- __bss_start = .;
- __bss_start__ = .;
- *(.bss .bss.*)
- *(.gnu.linkonce.b.*)
- *(COMMON)
- . = ALIGN(4);
- } >DATA
- . = ALIGN(4);
- __bss_end__ = .;
-
- _end = .;
- PROVIDE(end = .);
-
- /* .heap section which is used for memory allocation */
-
- .heap (NOLOAD) :
- {
- __heap_start__ = .;
- *(.heap)
- . = MAX(__heap_start__ + _HEAPSIZE , .);
- } >DATA
- __heap_end__ = __heap_start__ + SIZEOF(.heap);
-
- /* .stack section - user mode stack */
-
- .stack (__heap_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_start__ = .;
- *(.stack)
- . = MAX(__stack_start__ + _STACKSIZE , .);
- } >DATA
- __stack_end__ = __stack_start__ + SIZEOF(.stack);
-
- /* .stack_irq section */
-
- .stack_irq (__stack_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_irq_start__ = .;
- *(.stack_irq)
- . = MAX(__stack_irq_start__ + _STACKSIZE_IRQ , .);
- } >DATA
- __stack_irq_end__ = __stack_irq_start__ + SIZEOF(.stack_irq);
-
- /* .stack_fiq section */
-
- .stack_fiq (__stack_irq_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_fiq_start__ = .;
- *(.stack_fiq)
- . = MAX(__stack_fiq_start__ + _STACKSIZE_FIQ , .);
- } >DATA
- __stack_fiq_end__ = __stack_fiq_start__ + SIZEOF(.stack_fiq);
-
- /* .stack_svc section */
-
- .stack_svc (__stack_fiq_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_svc_start__ = .;
- *(.stack_svc)
- . = MAX(__stack_svc_start__ + _STACKSIZE_SVC , .);
- } >DATA
- __stack_svc_end__ = __stack_svc_start__ + SIZEOF(.stack_svc);
-
- /* .stack_abt section */
-
- .stack_abt (__stack_svc_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_abt_start__ = .;
- *(.stack_abt)
- . = MAX(__stack_abt_start__ + _STACKSIZE_ABT , .);
- } >DATA
- __stack_abt_end__ = __stack_abt_start__ + SIZEOF(.stack_abt);
-
- /* .stack_und section */
-
- .stack_und (__stack_abt_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_und_start__ = .;
- *(.stack_und)
- . = MAX(__stack_und_start__ + _STACKSIZE_UND , .);
- } >DATA
- __stack_und_end__ = __stack_und_start__ + SIZEOF(.stack_und);
-
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
- .comment 0 : { *(.comment) }
- /* DWARF debug sections.
- Symbols in the DWARF debugging sections are relative to the beginning
- of the section so we begin them at 0. */
- /* DWARF 1 */
- .debug 0 : { *(.debug) }
- .line 0 : { *(.line) }
- /* GNU DWARF 1 extensions */
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
- /* DWARF 1.1 and DWARF 2 */
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
- /* DWARF 2 */
- .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_line 0 : { *(.debug_line) }
- .debug_frame 0 : { *(.debug_frame) }
- .debug_str 0 : { *(.debug_str) }
- .debug_loc 0 : { *(.debug_loc) }
- .debug_macinfo 0 : { *(.debug_macinfo) }
- /* SGI/MIPS DWARF 2 extensions */
- .debug_weaknames 0 : { *(.debug_weaknames) }
- .debug_funcnames 0 : { *(.debug_funcnames) }
- .debug_typenames 0 : { *(.debug_typenames) }
- .debug_varnames 0 : { *(.debug_varnames) }
-}
-
diff --git a/uc_str912/prj_test_lcd/include/91x_ahbapb.h b/uc_str912/prj_test_lcd/include/91x_ahbapb.h deleted file mode 100644 index 1828d48..0000000 --- a/uc_str912/prj_test_lcd/include/91x_ahbapb.h +++ /dev/null @@ -1,60 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_ahbapb.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file contains all the functions prototypes for the
-* AHBAPB software library.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
-* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef _91x_AHBAPB_H
-#define _91x_AHBAPB_H
-
-#include "91x_map.h"
-
-#define AHBAPB_Split_Enable 0x01000000
-#define AHBAPB_Split_Disable 0xFEFFFFFF
-#define AHBAPB_Error_Enable 0x0000100
-#define AHBAPB_Error_Disable 0xFFFFEFF
-
-/*FLAG*/
-#define AHBAPB_FLAG_ERROR 0x01 /* error flag*/
-#define AHBAPB_FLAG_OUTM 0x10 /* Out of Memory flag */
-#define AHBAPB_FLAG_APBT 0x20 /* APB Time-out flag */
-#define AHBAPB_FLAG_RW 0x40 /*Access type flag*/
-
-/* Includes ------------------------------------------------------------------*/
-
-
-/* AHBAPB Init structure definition */
-typedef struct
-{
- u32 AHBAPB_SetTimeOut;
- u32 AHBAPB_Error;
- u32 AHBAPB_Split;
- u8 AHBAPB_SplitCounter;
-}AHBAPB_InitTypeDef;
-
-/* Exported constants --------------------------------------------------------*/
-void AHBAPB_DeInit(AHBAPB_TypeDef* AHBAPBx);
-void AHBAPB_Init(AHBAPB_TypeDef* AHBAPBx, AHBAPB_InitTypeDef* AHBAPB_InitStruct);
-void AHBAPB_StructInit(AHBAPB_InitTypeDef* AHBAPB_InitStruct);
-FlagStatus AHBAPB_GetFlagStatus(AHBAPB_TypeDef* AHBAPBx, u8 AHBAPB_FLAG);
-void AHBAPB_ClearFlag(AHBAPB_TypeDef* AHBAPBx, u8 AHBAPB_FLAG);
-u32 AHBAPB_GetPeriphAddrError(AHBAPB_TypeDef* AHBAPBx);
-
-
-#endif /* _91x_AHBAPB_H */
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_test_lcd/include/91x_conf.h b/uc_str912/prj_test_lcd/include/91x_conf.h deleted file mode 100644 index 578335d..0000000 --- a/uc_str912/prj_test_lcd/include/91x_conf.h +++ /dev/null @@ -1,115 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_conf.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : Library configuration.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
-* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-
-#ifndef __91x_CONF_H
-#define __91x_CONF_H
-
-/* To work in buffered mode just decomment the following line */
-
-//#define Buffered
-
-/* Comment the line below to put the library in release mode */
-//#define DEBUG
-
-/************************* AHBAPB *************************/
-//#define _AHBAPB
-//#define _AHBAPB0
-//#define _AHBAPB1
-/************************* VIC *************************/
-//#define _VIC
-//#define _VIC0
-//#define _VIC1
-/************************* DMA *************************/
-//#define _DMA
-//#define _DMA_Channel0
-//#define _DMA_Channel1
-//#define _DMA_Channel2
-//#define _DMA_Channel3
-//#define _DMA_Channel4
-//#define _DMA_Channel5
-//#define _DMA_Channel6
-//#define _DMA_Channel7
-
-/************************* EMI *************************/
-//#define _EMI
-//#define _EMI_Bank0
-//#define _EMI_Bank1
-//#define _EMI_Bank2
-//#define _EMI_Bank3
-/************************* FMI *************************/
-//#define _FMI
-/************************* WIU *************************/
-//#define _WIU
-/************************* TIM *************************/
-//#define _TIM
-//#define _TIM0
-//#define _TIM1
-//#define _TIM2
-//#define _TIM3
-/************************* GPIO ************************/
-#define _GPIO
-#define _GPIO0
-#define _GPIO1
-#define _GPIO2
-#define _GPIO3
-#define _GPIO4
-#define _GPIO5
-#define _GPIO6
-#define _GPIO7
-#define _GPIO8
-#define _GPIO9
-/************************* RTC *************************/
-//#define _RTC
-/************************* SCU *************************/
-#define _SCU
-/************************* MC **************************/
-//#define _MC
-/************************* UART ************************/
-//#define _UART
-//#define _UART0
-//#define _UART1
-//#define _UART2
-/************************* SSP *************************/
-//#define _SSP
-//#define _SSP0
-//#define _SSP1
-/************************* CAN *************************/
-//#define _CAN
-/************************* ADC *************************/
-//#define _ADC
-/************************* WDG *************************/
-//#define _WDG
-/************************* I2C *************************/
-//#define _I2C
-//#define _I2C0
-//#define _I2C1
-/************************ ENET *************************/
-//#define _ENET
-
-/*---------------------------- _Main_Crystal frequency value (KHz)------------*/
-
-#ifndef _Main_Crystal
-#define _Main_Crystal 25000
-#endif
-/*------------------------------------------------------------------------------*/
-
-
-#endif /* __91x_CONF_H */
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_test_lcd/include/91x_fmi.h b/uc_str912/prj_test_lcd/include/91x_fmi.h deleted file mode 100644 index 06e8115..0000000 --- a/uc_str912/prj_test_lcd/include/91x_fmi.h +++ /dev/null @@ -1,184 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_fmi.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file contains all the functions prototypes for the
-* FMI software library.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
-* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-
-/* Define to prevent recursive inclusion ------------------------------------ */
-
-#ifndef __91x_FMI_H
-#define __91x_FMI_H
-
-/* ========================================================================== */
-/* When bank 1 is remapped at address 0x0, decomment the following line */
-/* ========================================================================== */
-
-//#define Remap_Bank_1
-
-
-/* Includes ------------------------------------------------------------------*/
-
-#include "91x_map.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* FMI banks */
-
-#ifdef Remap_Bank_1
-
-#define FMI_BANK_0 ((*(vu32*)0x54000010) << 2) /* FMI Bank 0 */
-#define FMI_BANK_1 ((*(vu32*)0x5400000C) << 2) /* FMI Bank 1 */
-
-#else /* Remap Bank 0 */
-
-#define FMI_BANK_0 ((*(vu32*)0x5400000C) << 2) /* FMI Bank 0 */
-#define FMI_BANK_1 ((*(vu32*)0x54000010) << 2) /* FMI Bank 1 */
-
-#endif
-
-/* FMI sectors */
-
-#define FMI_B0S0 0x00000000 + FMI_BANK_0 /* Bank 0 sector 0 */
-#define FMI_B0S1 0x00010000 + FMI_BANK_0 /* Bank 0 sector 1 */
-#define FMI_B0S2 0x00020000 + FMI_BANK_0 /* Bank 0 sector 2 */
-#define FMI_B0S3 0x00030000 + FMI_BANK_0 /* Bank 0 sector 3 */
-#define FMI_B0S4 0x00040000 + FMI_BANK_0 /* Bank 0 sector 4 */
-#define FMI_B0S5 0x00050000 + FMI_BANK_0 /* Bank 0 sector 5 */
-#define FMI_B0S6 0x00060000 + FMI_BANK_0 /* Bank 0 sector 6 */
-#define FMI_B0S7 0x00070000 + FMI_BANK_0 /* Bank 0 sector 7 */
-
-#define FMI_B1S0 0x00000000 + FMI_BANK_1 /* Bank 1 sector 0 */
-#define FMI_B1S1 0x00002000 + FMI_BANK_1 /* Bank 1 sector 1 */
-#define FMI_B1S2 0x00004000 + FMI_BANK_1 /* Bank 1 sector 2 */
-#define FMI_B1S3 0x00006000 + FMI_BANK_1 /* Bank 1 sector 3 */
-
-/* FMI Flags */
-
-#define FMI_FLAG_SPS 0x02 /* Sector Protection Status Flag */
-#define FMI_FLAG_PSS 0x04 /* Program Suspend Status Flag */
-#define FMI_FLAG_PS 0x10 /* Program Status Flag */
-#define FMI_FLAG_ES 0x20 /* Erase Status Flag */
-#define FMI_FLAG_ESS 0x40 /* Erase Suspend Status Flag */
-#define FMI_FLAG_PECS 0x80 /* FPEC Status Flag */
-
-/* FMI read wait states */
-
-#define FMI_READ_WAIT_STATE_1 0x0000 /* One read wait state */
-#define FMI_READ_WAIT_STATE_2 0x2000 /* Two read wait states */
-#define FMI_READ_WAIT_STATE_3 0x4000 /* Three read wait states */
-
-/* FMI write wait states */
-
-#define FMI_WRITE_WAIT_STATE_0 0xFFFFFEFF /* Zero wait state */
-#define FMI_WRITE_WAIT_STATE_1 0x00000100 /* One wait state */
-
-/* FMI power down configuration */
-
-#define FMI_PWD_ENABLE 0x1000 /* FMI Power Down Enable */
-#define FMI_PWD_DISABLE 0x0000 /* FMI Power Down Disable */
-
-/* FMI low voltage detector */
-
-#define FMI_LVD_ENABLE 0x0000 /* FMI Low Voltage Detector Enable */
-#define FMI_LVD_DISABLE 0x0800 /* FMI Low Voltage Detector Disable */
-
-/* FMI frequency range */
-
-#define FMI_FREQ_LOW 0x0000 /* FMI Low bus working frequency */
-#define FMI_FREQ_HIGH 0x0040 /* FMI High bus working gfrequency */
- /* Above 66 MHz*/
-/* FMI OTP word addresses */
-
-#define FMI_OTP_WORD_0 0x00 /* OTP word 0 */
-#define FMI_OTP_WORD_1 0x04 /* OTP word 1 */
-#define FMI_OTP_WORD_2 0x08 /* OTP word 2 */
-#define FMI_OTP_WORD_3 0x0C /* OTP word 3 */
-#define FMI_OTP_WORD_4 0x10 /* OTP word 4 */
-#define FMI_OTP_WORD_5 0x14 /* OTP word 5 */
-#define FMI_OTP_WORD_6 0x18 /* OTP word 6 */
-#define FMI_OTP_WORD_7 0x1C /* OTP word 7 */
-
-/* FMI OTP halfword addresses */
-
-#define FMI_OTP_LOW_HALFWORD_0 0x00 /* OTP Low halfword 0 */
-#define FMI_OTP_HIGH_HALFWORD_0 0x02 /* OTP High halfword 0 */
-#define FMI_OTP_LOW_HALFWORD_1 0x04 /* OTP Low halfword 1 */
-#define FMI_OTP_HIGH_HALFWORD_1 0x06 /* OTP High halfword 1 */
-#define FMI_OTP_LOW_HALFWORD_2 0x08 /* OTP Low halfword 2 */
-#define FMI_OTP_HIGH_HALFWORD_2 0x0A /* OTP High halfword 2 */
-#define FMI_OTP_LOW_HALFWORD_3 0x0C /* OTP Low halfword 3 */
-#define FMI_OTP_HIGH_HALFWORD_3 0x0E /* OTP High halfword 3 */
-#define FMI_OTP_LOW_HALFWORD_4 0x10 /* OTP Low halfword 4 */
-#define FMI_OTP_HIGH_HALFWORD_4 0x12 /* OTP High halfword 4 */
-#define FMI_OTP_LOW_HALFWORD_5 0x14 /* OTP Low halfword 5 */
-#define FMI_OTP_HIGH_HALFWORD_5 0x16 /* OTP High halfword 5 */
-#define FMI_OTP_LOW_HALFWORD_6 0x18 /* OTP Low halfword 6 */
-#define FMI_OTP_HIGH_HALFWORD_6 0x1A /* OTP High halfword 6 */
-#define FMI_OTP_LOW_HALFWORD_7 0x1C /* OTP Low halfword 7 */
-#define FMI_OTP_HIGH_HALFWORD_7 0x1E /* OTP High halfword 7 */
-
-/* FMI sectors Masks */
-
-#define FMI_B0S0_MASK 0x0001 /* FMI B0S0 mask */
-#define FMI_B0S1_MASK 0x0002 /* FMI B0S1 mask */
-#define FMI_B0S2_MASK 0x0004 /* FMI B0S2 mask */
-#define FMI_B0S3_MASK 0x0008 /* FMI B0S3 mask */
-#define FMI_B0S4_MASK 0x0010 /* FMI B0S4 mask */
-#define FMI_B0S5_MASK 0x0020 /* FMI B0S5 mask */
-#define FMI_B0S6_MASK 0x0040 /* FMI B0S6 mask */
-#define FMI_B0S7_MASK 0x0080 /* FMI B0S7 mask */
-
-#define FMI_B1S0_MASK 0x0100 /* FMI B1S0 mask */
-#define FMI_B1S1_MASK 0x0200 /* FMI B1S1 mask */
-#define FMI_B1S2_MASK 0x0400 /* FMI B1S2 mask */
-#define FMI_B1S3_MASK 0x0800 /* FMI B1S3 mask */
-
-/* Timeout error */
-
-#define FMI_TIME_OUT_ERROR 0x00 /* Timeout error */
-#define FMI_NO_TIME_OUT_ERROR 0x01 /* No Timeout error */
-
-/* Module private variables --------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
-void FMI_BankRemapConfig(u8 FMI_BootBankSize, u8 FMI_NonBootBankSize, \
- u32 FMI_BootBankAddress, u32 FMI_NonBootBankAddress);
-void FMI_Config(u16 FMI_ReadWaitState, u32 FMI_WriteWaitState, u16 FMI_PWD,\
- u16 FMI_LVDEN, u16 FMI_FreqRange);
-void FMI_EraseSector(vu32 FMI_Sector);
-void FMI_EraseBank(vu32 FMI_Bank);
-void FMI_WriteHalfWord(u32 FMI_Address, u16 FMI_Data);
-void FMI_WriteOTPHalfWord(u8 FMI_OTPHWAddress, u16 FMI_OTPData);
-u32 FMI_ReadWord(u32 FMI_Address);
-u32 FMI_ReadOTPData(u8 FMI_OTPAddress);
-FlagStatus FMI_GetFlagStatus(u8 FMI_Flag, vu32 FMI_Bank);
-u16 FMI_GetReadWaitStateValue(void);
-u16 FMI_GetWriteWaitStateValue(void);
-void FMI_SuspendEnable(vu32 FMI_Bank);
-void FMI_ResumeEnable(vu32 FMI_Bank);
-void FMI_ClearFlag(vu32 FMI_Bank);
-void FMI_WriteProtectionCmd(vu32 FMI_Sector, FunctionalState FMI_NewState);
-FlagStatus FMI_GetWriteProtectionStatus(u32 FMI_Sector_Protection);
-u8 FMI_WaitForLastOperation(vu32 FMI_Bank);
-
-#endif /* __91x_FMI_H */
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
-
diff --git a/uc_str912/prj_test_lcd/include/91x_gpio.h b/uc_str912/prj_test_lcd/include/91x_gpio.h deleted file mode 100644 index 4beab75..0000000 --- a/uc_str912/prj_test_lcd/include/91x_gpio.h +++ /dev/null @@ -1,93 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_gpio.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file contains all the functions prototypes for the
-* GPIO software library.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
-* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion ------------------------------------ */
-
-#ifndef _91x_GPIO_H
-#define _91x_GPIO_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_map.h"
-
-/* GPIO Init structure definition */
-typedef struct
-{
- u8 GPIO_Pin;
- u8 GPIO_Direction;
- u8 GPIO_Type;
- u8 GPIO_IPConnected;
- u16 GPIO_Alternate;
-}GPIO_InitTypeDef;
-
-/* Bit_SET and Bit_RESET enumeration */
-typedef enum
-{ Bit_RESET = 0,
- Bit_SET
-}BitAction;
-
-
-/* Exported constants --------------------------------------------------------*/
-#define GPIO_Pin_None 0x00
-#define GPIO_Pin_0 0x01
-#define GPIO_Pin_1 0x02
-#define GPIO_Pin_2 0x04
-#define GPIO_Pin_3 0x08
-#define GPIO_Pin_4 0x10
-#define GPIO_Pin_5 0x20
-#define GPIO_Pin_6 0x40
-#define GPIO_Pin_7 0x80
-#define GPIO_Pin_All 0xFF
-
-#define GPIO_PinInput 0x00
-#define GPIO_PinOutput 0x01
-
-#define GPIO_Type_PushPull 0x00
-#define GPIO_Type_OpenCollector 0x01
-
-#define GPIO_IPConnected_Disable 0x00
-#define GPIO_IPConnected_Enable 0x01
-
-#define GPIO_InputAlt1 0x00
-#define GPIO_OutputAlt1 0x01
-#define GPIO_OutputAlt2 0x02
-#define GPIO_OutputAlt3 0x03
-
-#define GPIO_ANAChannel0 0x01
-#define GPIO_ANAChannel1 0x02
-#define GPIO_ANAChannel2 0x04
-#define GPIO_ANAChannel3 0x08
-#define GPIO_ANAChannel4 0x10
-#define GPIO_ANAChannel5 0x20
-#define GPIO_ANAChannel6 0x40
-#define GPIO_ANAChannel7 0x80
-#define GPIO_ANAChannelALL 0xFF
-
-void GPIO_DeInit(GPIO_TypeDef* GPIOx);
-void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct);
-void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct);
-u8 GPIO_ReadBit(GPIO_TypeDef* GPIOx, u8 GPIO_Pin);
-u8 GPIO_Read(GPIO_TypeDef* GPIOx);
-void GPIO_WriteBit(GPIO_TypeDef* GPIOx, u8 GPIO_Pin, BitAction BitVal);
-void GPIO_Write(GPIO_TypeDef* GPIOx, u8 PortVal);
-void GPIO_EMIConfig(FunctionalState NewState);
-void GPIO_ANAPinConfig(u8 GPIO_ANAChannel, FunctionalState NewState);
-
-#endif /* _91x_GPIO_H */
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_test_lcd/include/91x_lib.h b/uc_str912/prj_test_lcd/include/91x_lib.h deleted file mode 100644 index 823b250..0000000 --- a/uc_str912/prj_test_lcd/include/91x_lib.h +++ /dev/null @@ -1,114 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_lib.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : Used to include the peripherals header file in the
-* user application.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
-* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-#ifndef __91x_LIB_H
-#define __91x_LIB_H
-
-#include "91x_map.h"
-#include "91x_conf.h"
-
-#ifdef _AHBAPB
- #include "91x_ahbapb.h"
-#endif /* _AHBAPB */
-
-#ifdef _EMI
- #include "91x_emi.h"
-#endif /* _EMI */
-
-#ifdef _DMA
- #include "91x_dma.h"
-#endif /* _DMA */
-
-#ifdef _FMI
- #include "91x_fmi.h"
-#endif /* _FMI */
-
-#ifdef _VIC
- #include "91x_vic.h"
-#endif /* _VIC */
-
-#ifdef _WIU
- #include "91x_wiu.h"
-#endif /* _WIU */
-
-#ifdef _TIM
- #include "91x_tim.h"
-#endif /* _TIM */
-
-#ifdef _GPIO
- #include "91x_gpio.h"
-#endif /* _GPIO */
-
-#ifdef _RTC
- #include "91x_rtc.h"
-#endif /* _RTC */
-
-#ifdef _SCU
- #include "91x_scu.h"
-#endif /* _SCU */
-
-#ifdef _UART
- #include "91x_uart.h"
-#endif /* _UART */
-
-#ifdef _SSP
- #include "91x_ssp.h"
-#endif /* _SSP */
-
-#ifdef _CAN
- #include "91x_can.h"
-#endif /* _CAN */
-
-#ifdef _ADC
- #include "91x_adc.h"
-#endif /* _ADC */
-
-#ifdef _WDG
- #include "91x_wdg.h"
-#endif /* _WDG */
-
-#ifdef _I2C
- #include "91x_i2c.h"
-#endif /* _I2C */
-
-#ifdef _WIU
- #include "91x_wiu.h"
-#endif
-
-#ifdef _MC
- #include "91x_mc.h"
-#endif
-
-#ifdef _ENET
- #include "91x_enet.h"
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Module private variables --------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
- void debug( void );
-
-
-#endif /* __91x_LIB_H */
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_test_lcd/include/91x_map.h b/uc_str912/prj_test_lcd/include/91x_map.h deleted file mode 100644 index 2e94a91..0000000 --- a/uc_str912/prj_test_lcd/include/91x_map.h +++ /dev/null @@ -1,878 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_map.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : Peripherals registers definition and memory mapping.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
-* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion ------------------------------------ */
-#ifndef __91x_MAP_H
-#define __91x_MAP_H
-
-#ifndef EXT
- #define EXT extern
-#endif /* EXT */
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_conf.h"
-#include "91x_type.h"
-
-/******************************************************************************/
-/* IP registers structures */
-/******************************************************************************/
-
-/*------------------------------------ FMI -----------------------------------*/
-
-typedef struct
-{
- vu32 BBSR; /* Boot Bank Size Register */
- vu32 NBBSR; /* Non-Boot Bank Size Register */
- vu32 EMPTY1;
- vu32 BBADR; /* Boot Bank Base Address Register */
- vu32 NBBADR; /* Non-Boot Bank Base Address Register */
- vu32 EMPTY2;
- vu32 CR; /* Control Register */
- vu32 SR; /* Status Register */
- vu32 BCE5ADDR; /* BC Fifth Entry Target Address Register */
-} FMI_TypeDef;
-
-/*---------------------- Analog to Digital Convertor ------------------------*/
-
-typedef struct
-{
- vu16 CR; /* Control Register */
- vu16 EMPTY1;
- vu16 CCR; /* Channel Configuration Register */
- vu16 EMPTY2;
- vu16 HTR; /* Higher Threshold Register */
- vu16 EMPTY3;
- vu16 LTR; /* Lower Threshold Register */
- vu16 EMPTY4;
- vu16 CRR; /* Compare Result Register */
- vu16 EMPTY5;
- vu16 DR0; /* Data Register for Channel 0 */
- vu16 EMPTY6;
- vu16 DR1; /* Data Register for Channel 1 */
- vu16 EMPTY7;
- vu16 DR2; /* Data Register for Channel 2 */
- vu16 EMPTY8;
- vu16 DR3; /* Data Register for Channel 3 */
- vu16 EMPTY9;
- vu16 DR4; /* Data Register for Channel 4 */
- vu16 EMPTY10;
- vu16 DR5; /* Data Register for Channel 5 */
- vu16 EMPTY11;
- vu16 DR6; /* Data Register for Channel 6 */
- vu16 EMPTY12;
- vu16 DR7; /* Data Register for Channel 7 */
- vu16 EMPTY13;
- vu16 PRS; /* Prescaler Value Register */
- vu16 EMPTY14;
-} ADC_TypeDef;
-
-/*--------------------- AHB APB BRIDGE registers strcture --------------------*/
-
-typedef struct
-{
- vu32 BSR; /* Bridge Status Register */
- vu32 BCR; /* Bridge Configuration Register */
- vu32 PAER; /* Peripheral Address Error register */
-} AHBAPB_TypeDef;
-
-/*--------------- Controller Area Network Interface Register -----------------*/
-
-typedef struct
-{
- vu16 CRR; /* IFn Command request Register */
- vu16 EMPTY1;
- vu16 CMR; /* IFn Command Mask Register */
- vu16 EMPTY2;
- vu16 M1R; /* IFn Message Mask 1 Register */
- vu16 EMPTY3;
- vu16 M2R; /* IFn Message Mask 2 Register */
- vu16 EMPTY4;
- vu16 A1R; /* IFn Message Arbitration 1 Register */
- vu16 EMPTY5;
- vu16 A2R; /* IFn Message Arbitration 2 Register */
- vu16 EMPTY6;
- vu16 MCR; /* IFn Message Control Register */
- vu16 EMPTY7;
- vu16 DA1R; /* IFn DATA A 1 Register */
- vu16 EMPTY8;
- vu16 DA2R; /* IFn DATA A 2 Register */
- vu16 EMPTY9;
- vu16 DB1R; /* IFn DATA B 1 Register */
- vu16 EMPTY10;
- vu16 DB2R; /* IFn DATA B 2 Register */
- vu16 EMPTY11[27];
-} CAN_MsgObj_TypeDef;
-
-typedef struct
-{
- vu16 CR; /* Control Register */
- vu16 EMPTY1;
- vu16 SR; /* Status Register */
- vu16 EMPTY2;
- vu16 ERR; /* Error counter Register */
- vu16 EMPTY3;
- vu16 BTR; /* Bit Timing Register */
- vu16 EMPTY4;
- vu16 IDR; /* Interrupt Identifier Register */
- vu16 EMPTY5;
- vu16 TESTR; /* Test Register */
- vu16 EMPTY6;
- vu16 BRPR; /* BRP Extension Register */
- vu16 EMPTY7[3];
- CAN_MsgObj_TypeDef sMsgObj[2];
- vu16 EMPTY8[16];
- vu16 TXR1R; /* Transmission request 1 Register */
- vu16 EMPTY9;
- vu16 TXR2R; /* Transmission Request 2 Register */
- vu16 EMPTY10[13];
- vu16 ND1R; /* New Data 1 Register */
- vu16 EMPTY11;
- vu16 ND2R; /* New Data 2 Register */
- vu16 EMPTY12[13];
- vu16 IP1R; /* Interrupt Pending 1 Register */
- vu16 EMPTY13;
- vu16 IP2R; /* Interrupt Pending 2 Register */
- vu16 EMPTY14[13];
- vu16 MV1R; /* Message Valid 1 Register */
- vu16 EMPTY15;
- vu16 MV2R; /* Message VAlid 2 Register */
- vu16 EMPTY16;
-} CAN_TypeDef;
-
-/*----------------------- System Control Unit---------------------------------*/
-
-typedef struct
-{
- vu32 CLKCNTR; /* Clock Control Register */
- vu32 PLLCONF; /* PLL Configuration Register */
- vu32 SYSSTATUS; /* System Status Register */
- vu32 PWRMNG; /* Power Management Register */
- vu32 ITCMSK; /* Interrupt Mask Register */
- vu32 PCGRO; /* Peripheral Clock Gating Register 0 */
- vu32 PCGR1; /* Peripheral Clock Gating Register 1 */
- vu32 PRR0; /* Peripheral Reset Register 0 */
- vu32 PRR1; /* Peripheral Reset Register 1 */
- vu32 MGR0; /* Idle Mode Mask Gating Register 0 */
- vu32 MGR1; /* Idle Mode Mask Gating Register 1 */
- vu32 PECGR0; /* Peripheral Emulation Clock Gating Register 0 */
- vu32 PECGR1; /* Peripheral Emulation Clock Gating Register 1 */
- vu32 SCR0; /* System Configuration Register 0 */
- vu32 SCR1; /* System Configuration Register 1 */
- vu32 SCR2; /* System Configuration Register 2 */
- u32 EMPTY1;
- vu32 GPIOOUT[8]; /* GPIO Output Registers */
- vu32 GPIOIN[8]; /* GPIO Input Registers */
- vu32 GPIOTYPE[10];/* GPIO Type Registers */
- vu32 GPIOEMI; /* GPIO EMI Selector Register */
- vu32 WKUPSEL; /* Wake-Up Selection Register */
- u32 EMPTY2[2];
- vu32 GPIOANA; /* GPIO Analag mode Register */
-} SCU_TypeDef;
-
-/*------------------------- DMA Channelx Registers ---------------------------*/
-
-typedef struct
-{
- vu32 SRC; /* Channelx Source Address Register */
- vu32 DES; /* Channelx Destination Address Register */
- vu32 LLI; /* Channelx Lincked List Item Register */
- vu32 CC; /* Channelx Contol Register */
- vu32 CCNF; /* Channelx Configuration Register */
-} DMA_Channel_TypeDef;
-
-/* x can be ,0,1,2,3,4,5,6 or 7. There are eight Channels AHB BUS Master */
-
-/*----------------------------- DMA Controller -------------------------------*/
-
-typedef struct
-{
- vu32 ISR; /* Interrupt Status Register */
- vu32 TCISR; /* Terminal Count Interrupt Status Register */
- vu32 TCICR; /* Terminal CountInterrupt Clear Register */
- vu32 EISR; /* Error Interrupt Status Register */
- vu32 EICR; /* Error Interrupt Clear Register */
- vu32 TCRISR; /* Terminal Count Raw Interrupt Status Register */
- vu32 ERISR; /* Raw Error Interrupt Status Register */
- vu32 ENCSR; /* Enabled Channel Status Register */
- vu32 SBRR; /* Software Burst Request Register */
- vu32 SSRR; /* Software Single Request Register */
- vu32 SLBRR; /* Software Last Burst Request Register */
- vu32 SLSRR; /* Software Last Single Request Register */
- vu32 CNFR; /* Configuration Register */
- vu32 SYNR; /* Syncronization Register */
- } DMA_TypeDef;
-
-/*--------------------------------- TIM Timer --------------------------------*/
-
-typedef struct
-{
- vu16 IC1R; /* Input Capture 1 Register */
- vu16 EMPTY1;
- vu16 IC2R; /* Input Capture 2 Register */
- vu16 EMPTY2;
- vu16 OC1R; /* Output Compare 1 Register */
- vu16 EMPTY3;
- vu16 OC2R; /* Output Compare 2 Register */
- vu16 EMPTY4;
- vu16 CNTR; /* Counter Register */
- vu16 EMPTY5;
- vu16 CR1; /* Control Register 1 */
- vu16 EMPTY6;
- vu16 CR2; /* Control Register 2 */
- vu16 EMPTY7;
- vu16 SR; /* Status Register */
- vu16 EMPTY8;
-} TIM_TypeDef;
-
-/*---------------------------- EMI Bankx Registers ---------------------------*/
-
-typedef struct
-{
- vu32 ICR; /* Bankx Idle Cycle Control Register */
- vu32 RCR; /* Bankx Read Wait State Control Register */
- vu32 WCR; /* Bankx Write Wait State Control Register */
- vu32 OECR; /* Bankx Output Enable Assertion Delay Control Register */
- vu32 WECR; /* Bankx Write Enable Assertion Delay Control Register */
- vu32 BCR; /* Bankx Control Register */
- } EMI_Bank_TypeDef;
-
-/*---------------------------- Ethernet Controller ---------------------------*/
-
-/* MAC Registers */
-typedef struct
-{
- vu32 MCR; /* ENET Control Register */
- vu32 MAH; /* ENET Address High Register */
- vu32 MAL; /* ENET Address Low Register */
- vu32 MCHA; /* Multicast Address High Register */
- vu32 MCLA; /* Multicast Address Low Register */
- vu32 MIIA; /* MII Address Register */
- vu32 MIID; /* MII Data Register */
- vu32 MCF; /* ENET Control Frame Register */
- vu32 VL1; /* VLAN1 Register */
- vu32 VL2; /* VLAN2 register */
- vu32 MTS; /* ENET Transmission Status Register */
- vu32 MRS; /* ENET Reception Status Register */
-} ENET_MAC_TypeDef;
-
-/* DMA Registers */
-typedef struct
-{
- vu32 SCR; /* DMA Status and Control Register */
- vu32 IER; /* DMA Interrupt Sources Enable Register */
- vu32 ISR; /* DMA Interrupt Status Register */
- vu32 CCR; /* Clock Control Relation : HCLK, PCLK and
- ENET_CLK phase relations */
- vu32 RXSTR; /* Rx DMA start Register */
- vu32 RXCR; /* Rx DMA Control Register */
- vu32 RXSAR; /* Rx DMA Base Address Register */
- vu32 RXNDAR; /* Rx DMA Next Descriptor Address Register */
- vu32 RXCAR; /* Rx DMA Current Address Register */
- vu32 RXCTCR; /* Rx DMA Current Transfer Count Register */
- vu32 RXTOR; /* Rx DMA FIFO Time Out Register */
- vu32 RXSR; /* Rx DMA FIFO Status Register */
- vu32 TXSTR; /* Tx DMA start Register */
- vu32 TXCR; /* Tx DMA Control Register */
- vu32 TXSAR; /* Tx DMA Base Address Register */
- vu32 TXNDAR; /* Tx DMA Next Descriptor Address Register */
- vu32 TXCAR; /* Tx DMA Current Address Register */
- vu32 TXTCR; /* Tx DMA Current Transfer Count Register */
- vu32 TXTOR; /* Tx DMA FIFO Time Out Register */
- vu32 TXSR; /* Tx DMA FIFO Status Register */
-} ENET_DMA_TypeDef;
-
-/*------------------------------------- GPIO ---------------------------------*/
-
-typedef struct
-{
- vu8 DR[1021]; /* Data Register */
- vu32 DDR; /* Data Direction Register */
-} GPIO_TypeDef;
-
-/*-------------------------------- I2C interface -----------------------------*/
-
-typedef struct
-{
- vu8 CR; /* Control Register */
- vu8 EMPTY1[3];
- vu8 SR1; /* Status Register 1 */
- vu8 EMPTY2[3];
- vu8 SR2; /* Status Register 2 */
- vu8 EMPTY3[3];
- vu8 CCR; /* Clock Control Register */
- vu8 EMPTY4[3];
- vu8 OAR1; /* Own Address Register 1 */
- vu8 EMPTY5[3];
- vu8 OAR2; /* Own Address Register 2 */
- vu8 EMPTY6[3];
- vu8 DR; /* Data Register */
- vu8 EMPTY7[3];
- vu8 ECCR; /* Extended Clock Control Register */
- vu8 EMPTY8[3];
-} I2C_TypeDef;
-
-/*------------------------------------- VIC ----------------------------------*/
-
-typedef struct
-{
- vu32 ISR; /* IRQ Status Register */
- vu32 FSR; /* FIQ Status Register */
- vu32 RINTSR; /* Raw Interrupt Status Register */
- vu32 INTSR; /* Interrupt Select Register */
- vu32 INTER; /* Interrupt Enable Register */
- vu32 INTECR; /* Interrupt Enable Clear Register */
- vu32 SWINTR; /* Software Interrupt Register */
- vu32 SWINTCR; /* Software Interrupt clear Register */
- vu32 PER; /* Protection Enable Register */
- vu32 EMPTY1[3];
- vu32 VAR; /* Vector Address Register */
- vu32 DVAR; /* Default Vector Address Register */
- vu32 EMPTY2[50];
- vu32 VAiR[16]; /* Vector Address 0-15 Register */
- vu32 EMPTY3[48];
- vu32 VCiR[16]; /* Vector Control 0-15 Register */
-} VIC_TypeDef;
-
-/*-------------------------------- Motor Control -----------------------------*/
-
-typedef struct
-{
- vu16 TCPT; /* Tacho Capture Register */
- vu16 EMPTY1;
- vu16 TCMP; /* Tacho Compare Register */
- vu16 EMPTY2;
- vu16 IPR; /* Input Pending Register */
- vu16 EMPTY3;
- vu16 TPRS; /* Tacho Prescaler Register */
- vu16 EMPTY4;
- vu16 CPRS; /* PWM Counter Prescaler Register */
- vu16 EMPTY5;
- vu16 REP; /* Repetition Counter Register */
- vu16 EMPTY6;
- vu16 CMPW; /* Compare Phase W Preload Register */
- vu16 EMPTY7;
- vu16 CMPV; /* Compare Phase V Preload Register */
- vu16 EMPTY8;
- vu16 CMPU; /* Compare Phase U Preload Register */
- vu16 EMPTY9;
- vu16 CMP0; /* Compare 0 Preload Register */
- vu16 EMPTY10;
- vu16 PCR0; /* Peripheral Control Register 0 */
- vu16 EMPTY11;
- vu16 PCR1; /* Peripheral Control Register 1 */
- vu16 EMPTY12;
- vu16 PCR2; /* Peripheral Control Register 2 */
- vu16 EMPTY13;
- vu16 PSR; /* Polarity Selection Register */
- vu16 EMPTY14;
- vu16 OPR; /* Output Peripheral Register */
- vu16 EMPTY15;
- vu16 IMR; /* Interrupt Mask Register */
- vu16 EMPTY16;
- vu16 DTG; /* Dead Time Generator Register */
- vu16 EMPTY17;
- vu16 ESC; /* Emergency Stop Clear Register */
- vu16 EMPTY18;
-}MC_TypeDef;
-
-/*------------------------------------- RTC ----------------------------------*/
-
-typedef struct
-{
- vu32 TR; /* Time Register */
- vu32 DTR; /* Date Register */
- vu32 ATR; /* Alarm time Register */
- vu32 CR; /* Control Register */
- vu32 SR; /* Status Register */
- vu32 MILR; /* Millisec Register */
-}RTC_TypeDef;
-
-/*------------------------------------- SSP ----------------------------------*/
-
-typedef struct
-{
- vu16 CR0; /* Control Register 1 */
- vu16 EMPTY1;
- vu16 CR1; /* Control Register 2 */
- vu16 EMPTY2;
- vu16 DR; /* Data Register */
- vu16 EMPTY3;
- vu16 SR; /* Status Register */
- vu16 EMPTY4;
- vu16 PR; /* Clock Prescale Register */
- vu16 EMPTY5;
- vu16 IMSCR; /* Interrupt Mask Set or Clear Register */
- vu16 EMPTY6;
- vu16 RISR; /* Raw Interrupt Status Register */
- vu16 EMPTY7;
- vu16 MISR; /* Masked Interrupt Status Register */
- vu16 EMPTY8;
- vu16 ICR; /* Interrupt Clear Register */
- vu16 EMPTY9;
- vu16 DMACR; /* DMA Control Register */
- vu16 EMPTY10;
-}SSP_TypeDef;
-
-/*------------------------------------ UART ----------------------------------*/
-
-typedef struct
-{
- vu16 DR; /* Data Register */
- vu16 EMPTY1;
- vu16 RSECR; /* Receive Status Register (read)/Error Clear Register (write) */
- vu16 EMPTY2[9];
- vu16 FR; /* Flag Register */
- vu16 EMPTY3[3];
- vu16 ILPR; /* IrDA Low-Power counter Register */
- vu16 EMPTY4;
- vu16 IBRD; /* Integer Baud Rate Divisor Register */
- vu16 EMPTY5;
- vu16 FBRD; /* Fractional Baud Rate Divisor Register */
- vu16 EMPTY6;
- vu16 LCR; /* Line Control Register, High byte */
- vu16 EMPTY7;
- vu16 CR; /* Control Register */
- vu16 EMPTY8;
- vu16 IFLS; /* Interrupt FIFO Level Select Register */
- vu16 EMPTY9;
- vu16 IMSC; /* Interrupt Mask Set/Clear Register */
- vu16 EMPTY10;
- vu16 RIS; /* Raw Interrupt Status Register */
- vu16 EMPTY11;
- vu16 MIS; /* Masked Interrupt Status Register */
- vu16 EMPTY12;
- vu16 ICR; /* Interrupt Clear Register */
- vu16 EMPTY13;
- vu16 DMACR; /* DMA Control Register */
- vu16 EMPTY14;
-}UART_TypeDef;
-
-/*------------------------------- Wake-up System -----------------------------*/
-
-typedef struct
-{
- vu32 CTRL; /* Control Register */
- vu32 MR; /* Mask Register */
- vu32 TR; /* Trigger Register */
- vu32 PR; /* Pending Register */
- vu32 INTR; /* Software Interrupt Register */
-} WIU_TypeDef;
-
-/*------------------------------- WatchDog Timer -----------------------------*/
-
-typedef struct
-{
- vu16 CR; /* Control Register */
- vu16 EMPTY1;
- vu16 PR; /* Presclar Register */
- vu16 EMPTY2;
- vu16 VR; /* Pre-load Value Register */
- vu16 EMPTY3;
- vu16 CNT; /* Counter Register */
- vu16 EMPTY4;
- vu16 SR; /* Status Register */
- vu16 EMPTY5;
- vu16 MR; /* Mask Register */
- vu16 EMPTY6;
- vu16 KR; /* Key Register */
- vu16 EMPTY7;
-} WDG_TypeDef;
-
-/*******************************************************************************
-* Memory Mapping of STR91x *
-*******************************************************************************/
-
-#define AHB_APB_BRDG0_U (0x58000000) /* AHB/APB Bridge 0 UnBuffered Space */
-#define AHB_APB_BRDG0_B (0x48000000) /* AHB/APB Bridge 0 Buffered Space */
-
-#define AHB_APB_BRDG1_U (0x5C000000) /* AHB/APB Bridge 1 UnBuffered Space */
-#define AHB_APB_BRDG1_B (0x4C000000) /* AHB/APB Bridge 1 Buffered Space */
-
-#define AHB_EMI_U (0x74000000) /* EMI UnBuffered Space */
-#define AHB_EMI_B (0x64000000) /* EMI Buffered Space */
-
-#define AHB_DMA_U (0x78000000) /* DMA UnBuffered Space */
-#define AHB_DMA_B (0x68000000) /* DMA Buffered Space */
-
-#define AHB_ENET_MAC_U (0x7C000400) /* ENET_MAC UnBuffered Space */
-#define AHB_ENET_MAC_B (0x6C000000) /* ENET_MAC Buffered Space */
-
-#define AHB_ENET_DMA_U (0x7C000000) /* ENET_DMA Unbuffered Space */
-#define AHB_ENET_DMA_B (0x6C000400) /* ENET_DMA Buffered Space */
-
-#define AHB_VIC1_U (0xFC000000) /* Secondary VIC1 UnBuffered Space */
-#define AHB_VIC0_U (0xFFFFF000) /* Primary VIC0 UnBuffered Space */
-
-#define AHB_FMI_U (0x54000000) /* FMI Unbuffered Space */
-#define AHB_FMI_B (0x44000000) /* FMI buffered Space */
-
-/*******************************************************************************
-* Addresses related to the VICs' peripherals *
-*******************************************************************************/
-
-#define VIC0_BASE (AHB_VIC0_U)
-#define VIC1_BASE (AHB_VIC1_U)
-
-/*******************************************************************************
-* Addresses related to the EMI banks *
-*******************************************************************************/
-
-#define AHB_EMIB3_OFST (0x00000040) /* Offset of EMI bank3 */
-#define AHB_EMIB2_OFST (0x00000020) /* Offset of EMI bank2 */
-#define AHB_EMIB1_OFST (0x00000000) /* Offset of EMI bank1 */
-#define AHB_EMIB0_OFST (0x000000E0) /* Offset of EMI bank0 */
-
-/*******************************************************************************
-* Addresses related to the DMA peripheral *
-*******************************************************************************/
-
-#define AHB_DMA_Channel0_OFST (0x00000100) /* Offset of Channel 0 */
-#define AHB_DMA_Channel1_OFST (0x00000120) /* Offset of Channel 1 */
-#define AHB_DMA_Channel2_OFST (0x00000140) /* Offset of Channel 2 */
-#define AHB_DMA_Channel3_OFST (0x00000160) /* Offset of Channel 3 */
-#define AHB_DMA_Channel4_OFST (0x00000180) /* Offset of Channel 4 */
-#define AHB_DMA_Channel5_OFST (0x000001A0) /* Offset of Channel 5 */
-#define AHB_DMA_Channel6_OFST (0x000001C0) /* Offset of Channel 6 */
-#define AHB_DMA_Channel7_OFST (0x000001E0) /* Offset of Channel 7 */
-
-/*******************************************************************************
-* Addresses related to the APB0 sub-system *
-*******************************************************************************/
-
-#define APB_WIU_OFST (0x00001000) /* Offset of WIU */
-#define APB_TIM0_OFST (0x00002000) /* Offset of TIM0 */
-#define APB_TIM1_OFST (0x00003000) /* Offset of TIM1 */
-#define APB_TIM2_OFST (0x00004000) /* Offset of TIM2 */
-#define APB_TIM3_OFST (0x00005000) /* Offset of TIM3 */
-#define APB_GPIO0_OFST (0x00006000) /* Offset of GPIO0 */
-#define APB_GPIO1_OFST (0x00007000) /* Offset of GPIO1 */
-#define APB_GPIO2_OFST (0x00008000) /* Offset of GPIO2 */
-#define APB_GPIO3_OFST (0x00009000) /* Offset of GPIO3 */
-#define APB_GPIO4_OFST (0x0000A000) /* Offset of GPIO4 */
-#define APB_GPIO5_OFST (0x0000B000) /* Offset of GPIO5 */
-#define APB_GPIO6_OFST (0x0000C000) /* Offset of GPIO6 */
-#define APB_GPIO7_OFST (0x0000D000) /* Offset of GPIO7 */
-#define APB_GPIO8_OFST (0x0000E000) /* Offset of GPIO8 */
-#define APB_GPIO9_OFST (0x0000F000) /* Offset of GPIO9 */
-
-/*******************************************************************************
-* Addresses related to the APB1 sub-system *
-*******************************************************************************/
-
-#define APB_RTC_OFST (0x00001000) /* Offset of RTC */
-#define APB_SCU_OFST (0x00002000) /* Offset of System Controller */
-#define APB_MC_OFST (0x00003000) /* Offset of Motor Control */
-#define APB_UART0_OFST (0x00004000) /* Offset of UART0 */
-#define APB_UART1_OFST (0x00005000) /* Offset of UART1 */
-#define APB_UART2_OFST (0x00006000) /* Offset of UART2 */
-#define APB_SSP0_OFST (0x00007000) /* Offset of SSP0 */
-#define APB_SSP1_OFST (0x00008000) /* Offset of SSPI */
-#define APB_CAN_OFST (0x00009000) /* Offset of CAN */
-#define APB_ADC_OFST (0x0000A000) /* Offset of ADC */
-#define APB_WDG_OFST (0x0000B000) /* Offset of WDG */
-#define APB_I2C0_OFST (0x0000C000) /* Offset of I2C0 */
-#define APB_I2C1_OFST (0x0000D000) /* Offset of I2C1 */
-
-/*----------------------------------------------------------------------------*/
-/*----------------------------- Unbuffered Mode ------------------------------*/
-/*----------------------------------------------------------------------------*/
-
-#ifndef Buffered
-
-/*******************************************************************************
-* AHBAPB peripheral Unbuffered Base Address *
-*******************************************************************************/
-
-#define AHBAPB0_BASE (AHB_APB_BRDG0_U)
-#define AHBAPB1_BASE (AHB_APB_BRDG1_U)
-
-/*******************************************************************************
-* ENET peripheral Unbuffered Base Address *
-*******************************************************************************/
-
-#define ENET_MAC_BASE (AHB_ENET_MAC_U)
-#define ENET_DMA_BASE (AHB_ENET_DMA_U)
-
-/*******************************************************************************
-* DMA peripheral Unbuffered Base Address *
-*******************************************************************************/
-
-#define DMA_BASE (AHB_DMA_U)
-
-/*******************************************************************************
-* EMI peripheral Unbuffered Base Address *
-*******************************************************************************/
-
-#define EMI_BASE (AHB_EMI_U)
-
-/*******************************************************************************
-* FMI peripheral Unbuffered Base Address *
-*******************************************************************************/
-
-#define FMI_BASE (AHB_FMI_U)
-
-
-#else /* Buffered */
-
-/*----------------------------------------------------------------------------*/
-/*------------------------------ Buffered Mode -------------------------------*/
-/*----------------------------------------------------------------------------*/
-
-/*******************************************************************************
-* AHBAPB peripheral Buffered Base Address *
-*******************************************************************************/
-
-#define AHBAPB0_BASE (AHB_APB_BRDG0_B)
-#define AHBAPB1_BASE (AHB_APB_BRDG1_B)
-
-/*******************************************************************************
-* ENET peripheral Unbuffered Base Address *
-*******************************************************************************/
-
-#define ENET_MAC_BASE (AHB_ENET_MAC_B)
-#define ENET_DMA_BASE (AHB_ENET_DMA_B)
-
-/*******************************************************************************
-* DMA peripheral Buffered Base Address *
-*******************************************************************************/
-
-#define DMA_BASE (AHB_DMA_B)
-
-/*******************************************************************************
-* EMI peripheral Buffered Base Address *
-*******************************************************************************/
-
-#define EMI_BASE (AHB_EMI_B)
-
-/*******************************************************************************
-* FMI peripheral Buffered Base Address *
-*******************************************************************************/
-
-#define FMI_BASE (AHB_FMI_B)
-
-#endif /* Buffered */
-
-/*******************************************************************************
-* DMA channels Base Address *
-*******************************************************************************/
-#define DMA_Channel0_BASE (DMA_BASE + AHB_DMA_Channel0_OFST)
-#define DMA_Channel1_BASE (DMA_BASE + AHB_DMA_Channel1_OFST)
-#define DMA_Channel2_BASE (DMA_BASE + AHB_DMA_Channel2_OFST)
-#define DMA_Channel3_BASE (DMA_BASE + AHB_DMA_Channel3_OFST)
-#define DMA_Channel4_BASE (DMA_BASE + AHB_DMA_Channel4_OFST)
-#define DMA_Channel5_BASE (DMA_BASE + AHB_DMA_Channel5_OFST)
-#define DMA_Channel6_BASE (DMA_BASE + AHB_DMA_Channel6_OFST)
-#define DMA_Channel7_BASE (DMA_BASE + AHB_DMA_Channel7_OFST)
-
-/*******************************************************************************
-* EMI Banks peripheral Base Address *
-*******************************************************************************/
-
-#define EMI_Bank0_BASE (EMI_BASE + AHB_EMIB0_OFST)
-#define EMI_Bank1_BASE (EMI_BASE + AHB_EMIB1_OFST)
-#define EMI_Bank2_BASE (EMI_BASE + AHB_EMIB2_OFST)
-#define EMI_Bank3_BASE (EMI_BASE + AHB_EMIB3_OFST)
-
-/*******************************************************************************
-* APB0 Peripherals' Base addresses *
-*******************************************************************************/
-
-#define WIU_BASE (AHBAPB0_BASE + APB_WIU_OFST)
-#define TIM0_BASE (AHBAPB0_BASE + APB_TIM0_OFST)
-#define TIM1_BASE (AHBAPB0_BASE + APB_TIM1_OFST)
-#define TIM2_BASE (AHBAPB0_BASE + APB_TIM2_OFST)
-#define TIM3_BASE (AHBAPB0_BASE + APB_TIM3_OFST)
-#define GPIO0_BASE (AHBAPB0_BASE + APB_GPIO0_OFST)
-#define GPIO1_BASE (AHBAPB0_BASE + APB_GPIO1_OFST)
-#define GPIO2_BASE (AHBAPB0_BASE + APB_GPIO2_OFST)
-#define GPIO3_BASE (AHBAPB0_BASE + APB_GPIO3_OFST)
-#define GPIO4_BASE (AHBAPB0_BASE + APB_GPIO4_OFST)
-#define GPIO5_BASE (AHBAPB0_BASE + APB_GPIO5_OFST)
-#define GPIO6_BASE (AHBAPB0_BASE + APB_GPIO6_OFST)
-#define GPIO7_BASE (AHBAPB0_BASE + APB_GPIO7_OFST)
-#define GPIO8_BASE (AHBAPB0_BASE + APB_GPIO8_OFST)
-#define GPIO9_BASE (AHBAPB0_BASE + APB_GPIO9_OFST)
-
-/*******************************************************************************
-* APB1 Peripherals' Base addresses *
-*******************************************************************************/
-
-#define RTC_BASE (AHBAPB1_BASE + APB_RTC_OFST)
-#define SCU_BASE (AHBAPB1_BASE + APB_SCU_OFST)
-#define MC_BASE (AHBAPB1_BASE + APB_MC_OFST)
-#define UART0_BASE (AHBAPB1_BASE + APB_UART0_OFST)
-#define UART1_BASE (AHBAPB1_BASE + APB_UART1_OFST)
-#define UART2_BASE (AHBAPB1_BASE + APB_UART2_OFST)
-#define SSP0_BASE (AHBAPB1_BASE + APB_SSP0_OFST)
-#define SSP1_BASE (AHBAPB1_BASE + APB_SSP1_OFST)
-#define CAN_BASE (AHBAPB1_BASE + APB_CAN_OFST)
-#define ADC_BASE (AHBAPB1_BASE + APB_ADC_OFST)
-#define WDG_BASE (AHBAPB1_BASE + APB_WDG_OFST)
-#define I2C0_BASE (AHBAPB1_BASE + APB_I2C0_OFST)
-#define I2C1_BASE (AHBAPB1_BASE + APB_I2C1_OFST)
-
-/*******************************************************************************
-* IPs' declaration *
-*******************************************************************************/
-
-/*------------------------------ Non Debug Mode ------------------------------*/
-#undef DEBUG
-#ifndef DEBUG
-
-/*********************************** AHBAPB ***********************************/
-
-#define AHBAPB0 ((AHBAPB_TypeDef *)AHBAPB0_BASE)
-#define AHBAPB1 ((AHBAPB_TypeDef *)AHBAPB1_BASE)
-
-/************************************* EMI ************************************/
-
-#define EMI ((EMI_TypeDef *)EMI_BASE)
-
-/************************************* DMA ************************************/
-
-#define DMA ((DMA_TypeDef *)DMA_BASE)
-#define DMA_Channel0 ((DMA_Channel_TypeDef *)DMA_Channel0_BASE)
-#define DMA_Channel1 ((DMA_Channel_TypeDef *)DMA_Channel1_BASE)
-#define DMA_Channel2 ((DMA_Channel_TypeDef *)DMA_Channel2_BASE)
-#define DMA_Channel3 ((DMA_Channel_TypeDef *)DMA_Channel3_BASE)
-#define DMA_Channel4 ((DMA_Channel_TypeDef *)DMA_Channel4_BASE)
-#define DMA_Channel5 ((DMA_Channel_TypeDef *)DMA_Channel5_BASE)
-#define DMA_Channel6 ((DMA_Channel_TypeDef *)DMA_Channel6_BASE)
-#define DMA_Channel7 ((DMA_Channel_TypeDef *)DMA_Channel7_BASE)
-
-/************************************* EMI ************************************/
-
-#define EMI_Bank0 ((EMI_Bank_TypeDef *)EMI_Bank0_BASE)
-#define EMI_Bank1 ((EMI_Bank_TypeDef *)EMI_Bank1_BASE)
-#define EMI_Bank2 ((EMI_Bank_TypeDef *)EMI_Bank2_BASE)
-#define EMI_Bank3 ((EMI_Bank_TypeDef *)EMI_Bank3_BASE)
-
-/************************************* ENET_MAC ************************************/
-
-#define ENET_MAC ((ENET_MAC_TypeDef *)ENET_MAC_BASE)
-
-/************************************* ENET_DMA ************************************/
-
-#define ENET_DMA ((ENET_DMA_TypeDef *)ENET_DMA_BASE)
-
-/************************************* FMI ************************************/
-
-#define FMI ((FMI_TypeDef *)FMI_BASE)
-
-/************************************* VIC ************************************/
-
-#define VIC0 ((VIC_TypeDef *)VIC0_BASE)
-#define VIC1 ((VIC_TypeDef *)VIC1_BASE)
-
-/*******************************************************************************
-* APB0 Peripherals' *
-*******************************************************************************/
-#define WIU ((WIU_TypeDef *)WIU_BASE)
-#define TIM0 ((TIM_TypeDef *)TIM0_BASE)
-#define TIM1 ((TIM_TypeDef *)TIM1_BASE)
-#define TIM2 ((TIM_TypeDef *)TIM2_BASE)
-#define TIM3 ((TIM_TypeDef *)TIM3_BASE)
-#define GPIO0 ((GPIO_TypeDef *)GPIO0_BASE)
-#define GPIO1 ((GPIO_TypeDef *)GPIO1_BASE)
-#define GPIO2 ((GPIO_TypeDef *)GPIO2_BASE)
-#define GPIO3 ((GPIO_TypeDef *)GPIO3_BASE)
-#define GPIO4 ((GPIO_TypeDef *)GPIO4_BASE)
-#define GPIO5 ((GPIO_TypeDef *)GPIO5_BASE)
-#define GPIO6 ((GPIO_TypeDef *)GPIO6_BASE)
-#define GPIO7 ((GPIO_TypeDef *)GPIO7_BASE)
-#define GPIO8 ((GPIO_TypeDef *)GPIO8_BASE)
-#define GPIO9 ((GPIO_TypeDef *)GPIO9_BASE)
-/*******************************************************************************
-* APB1 Peripherals' *
-*******************************************************************************/
-#define RTC ((RTC_TypeDef *)RTC_BASE)
-#define SCU ((SCU_TypeDef *)SCU_BASE)
-#define MC ((MC_TypeDef *)MC_BASE)
-#define UART0 ((UART_TypeDef *)UART0_BASE)
-#define UART1 ((UART_TypeDef *)UART1_BASE)
-#define UART2 ((UART_TypeDef *)UART2_BASE)
-#define SSP0 ((SSP_TypeDef *)SSP0_BASE)
-#define SSP1 ((SSP_TypeDef *)SSP1_BASE)
-#define CAN ((CAN_TypeDef *)CAN_BASE)
-#define ADC ((ADC_TypeDef *)ADC_BASE)
-#define WDG ((WDG_TypeDef *)WDG_BASE)
-#define I2C0 ((I2C_TypeDef *)I2C0_BASE)
-#define I2C1 ((I2C_TypeDef *)I2C1_BASE)
-#define ENET_MAC ((ENET_MAC_TypeDef *)ENET_MAC_BASE)
-#define ENET_DMA ((ENET_DMA_TypeDef *)ENET_DMA_BASE)
-
-#else /* DEBUG */
-
-/*-------------------------------- Debug Mode --------------------------------*/
-
-EXT AHBAPB_TypeDef *AHBAPB0;
-EXT AHBAPB_TypeDef *AHBAPB1;
-EXT DMA_TypeDef *DMA;
-EXT DMA_Channel_TypeDef *DMA_Channel0;
-EXT DMA_Channel_TypeDef *DMA_Channel1;
-EXT DMA_Channel_TypeDef *DMA_Channel2;
-EXT DMA_Channel_TypeDef *DMA_Channel3;
-EXT DMA_Channel_TypeDef *DMA_Channel4;
-EXT DMA_Channel_TypeDef *DMA_Channel5;
-EXT DMA_Channel_TypeDef *DMA_Channel6;
-EXT DMA_Channel_TypeDef *DMA_Channel7;
-EXT EMI_Bank_TypeDef *EMI_Bank0;
-EXT EMI_Bank_TypeDef *EMI_Bank1;
-EXT EMI_Bank_TypeDef *EMI_Bank2;
-EXT EMI_Bank_TypeDef *EMI_Bank3;
-EXT FMI_TypeDef *FMI;
-EXT VIC_TypeDef *VIC0;
-EXT VIC_TypeDef *VIC1;
-EXT WIU_TypeDef *WIU;
-EXT TIM_TypeDef *TIM0;
-EXT TIM_TypeDef *TIM1;
-EXT TIM_TypeDef *TIM2;
-EXT TIM_TypeDef *TIM3;
-EXT GPIO_TypeDef *GPIO0;
-EXT GPIO_TypeDef *GPIO1;
-EXT GPIO_TypeDef *GPIO2;
-EXT GPIO_TypeDef *GPIO3;
-EXT GPIO_TypeDef *GPIO4;
-EXT GPIO_TypeDef *GPIO5;
-EXT GPIO_TypeDef *GPIO6;
-EXT GPIO_TypeDef *GPIO7;
-EXT GPIO_TypeDef *GPIO8;
-EXT GPIO_TypeDef *GPIO9;
-EXT RTC_TypeDef *RTC;
-EXT SCU_TypeDef *SCU;
-EXT MC_TypeDef *MC;
-EXT UART_TypeDef *UART0;
-EXT UART_TypeDef *UART1;
-EXT UART_TypeDef *UART2;
-EXT SSP_TypeDef *SSP0;
-EXT SSP_TypeDef *SSP1;
-EXT CAN_TypeDef *CAN;
-EXT ADC_TypeDef *ADC;
-EXT WDG_TypeDef *WDG;
-EXT I2C_TypeDef *I2C0;
-EXT I2C_TypeDef *I2C1;
-EXT ENET_MAC_TypeDef *ENET_MAC;
-EXT ENET_DMA_TypeDef *ENET_DMA;
-
-
-#endif /* DEBUG */
-
-#endif /* __91x_MAP_H*/
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
-
diff --git a/uc_str912/prj_test_lcd/include/91x_scu.h b/uc_str912/prj_test_lcd/include/91x_scu.h deleted file mode 100644 index b9d04f5..0000000 --- a/uc_str912/prj_test_lcd/include/91x_scu.h +++ /dev/null @@ -1,196 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_scu.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file provides the SCU library software functions
-* prototypes & definitions
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
-* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __91x_SCU_H
-#define __91x_SCU_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_map.h"
-
-/* Exported constants --------------------------------------------------------*/
-
-/*MCLK_Source*/
-#define SCU_MCLK_PLL 0x0
-#define SCU_MCLK_RTC 0x1
-#define SCU_MCLK_OSC 0x2
-
-/*RCLK_Divisor*/
-#define SCU_RCLK_Div1 0xFFFFFFE3
-#define SCU_RCLK_Div2 0x4
-#define SCU_RCLK_Div4 0x8
-#define SCU_RCLK_Div8 0xC
-#define SCU_RCLK_Div16 0x10
-#define SCU_RCLK_Div1024 0x14
-
-/*HCLK_Divisor*/
-#define SCU_HCLK_Div1 0xFFFFFF9F
-#define SCU_HCLK_Div2 0x20
-#define SCU_HCLK_Div4 0x40
-
-/*PCLK_Divisor*/
-#define SCU_PCLK_Div1 0xFFFFFE7F
-#define SCU_PCLK_Div2 0x80
-#define SCU_PCLK_Div4 0x100
-#define SCU_PCLK_Div8 0x180
-
-/*FMICLK_Divisor*/
-#define SCU_FMICLK_Div1 0xFFFEFFFF
-#define SCU_FMICLK_Div2 0x10000
-
-/*BRCLK_Divisor*/
-#define SCU_BRCLK_Div1 0xFFFFFDFF
-#define SCU_BRCLK_Div2 0x200
-
-/*TIMCLK_Source*/
-#define SCU_TIMCLK_EXT 0x1
-#define SCU_TIMCLK_INT 0x0
-
-/*TIMx*/
-#define SCU_TIM01 0x0
-#define SCU_TIM23 0x1
-
-
-/*USBCLK_Source*/
-#define SCU_USBCLK_MCLK 0xFFFFF3FF
-#define SCU_USBCLK_MCLK2 0x400
-#define SCU_USBCLK_EXT 0x800
-
-/*SCU_EMIBCLK*/
-#define SCU_EMIBCLK_Div1 0xFFF9FFFF
-#define SCU_EMIBCLK_Div2 0x20000
-
-/*SCU_EMIMODE*/
-#define SCU_EMI_MUX 0xFFFFFFBF
-#define SCU_EMI_DEMUX 0x40
-
-/*SCU_EMIALE_LEN*/
-#define SCU_EMIALE_LEN1 0xFFFFFEFF
-#define SCU_EMIALE_LEN2 0x100
-
-/*SCU_EMIALE_POL*/
-#define SCU_EMIALE_POLLow 0xFFFFFF7F
-#define SCU_EMIALE_POLHigh 0x80
-
-/*UART_IrDA_Mode*/
-#define SCU_UARTMode_IrDA 0x1
-#define SCU_UARTMode_UART 0x0
-
-/*APBPeriph*/
-#define __TIM01 0x1
-#define __TIM23 0x2
-#define __MC 0x4
-#define __UART0 0x8
-#define __UART1 0x10
-#define __UART2 0x20
-#define __I2C0 0x40
-#define __I2C1 0x80
-#define __SSP0 0x100
-#define __SSP1 0x200
-#define __CAN 0x400
-#define __ADC 0x800
-#define __WDG 0x1000
-#define __WIU 0x2000
-#define __GPIO0 0x4000
-#define __GPIO1 0x8000
-#define __GPIO2 0x10000
-#define __GPIO3 0x20000
-#define __GPIO4 0x40000
-#define __GPIO5 0x80000
-#define __GPIO6 0x100000
-#define __GPIO7 0x200000
-#define __GPIO8 0x400000
-#define __GPIO9 0x800000
-#define __RTC 0x1000000
-
-/*AHBPeriph*/
-#define __FMI 0x1
-#define __FPQBC 0x2
-#define __SRAM 0x8
-#define __SRAM_ARBITER 0x10
-#define __VIC 0x20
-#define __EMI 0x40
-#define __EMI_MEM_CLK 0x80
-#define __DMA 0x100
-#define __USB 0x200
-#define __USB48M 0x400
-#define __ENET 0x800
-#define __PFQBC_AHB 0x1000
-
-/*SCU_IT*/
-#define SCU_IT_LVD_RST 0x10
-#define SCU_IT_SRAM_ERROR 0x8
-#define SCU_IT_ACK_PFQBC 0x4
-#define SCU_IT_LOCK_LOST 0x2
-#define SCU_IT_LOCK 0x1
-
-/*SCU_FLAG*/
-#define SCU_FLAG_SRAM_ERROR 0x20
-#define SCU_FLAG_ACK_PFQBC 0x10
-#define SCU_FLAG_LVD_RESET 0x8
-#define SCU_FLAG_WDG_RST 0x4
-#define SCU_FLAG_LOCK_LOST 0x2
-#define SCU_FLAG_LOCK 0x1
-
-
-/* Module private variables --------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-ErrorStatus SCU_MCLKSourceConfig(u32 MCLK_Source);
-ErrorStatus SCU_PLLFactorsConfig(u8 PLLN, u8 PLLM, u8 PLLP);
-ErrorStatus SCU_PLLCmd(FunctionalState NewState);
-void SCU_RCLKDivisorConfig(u32 RCLK_Divisor);
-void SCU_HCLKDivisorConfig(u32 HCLK_Divisor);
-void SCU_PCLKDivisorConfig(u32 PCLK_Divisor);
-void SCU_APBPeriphClockConfig(u32 APBPeriph, FunctionalState NewState);
-void SCU_AHBPeriphClockConfig(u32 AHBPeriph, FunctionalState NewState);
-void SCU_APBPeriphReset(u32 APBPeriph, FunctionalState NewState);
-void SCU_AHBPeriphReset(u32 AHBPeriph, FunctionalState NewState);
-void SCU_APBPeriphIdleConfig(u32 APBPeriph, FunctionalState NewState);
-void SCU_AHBPeriphIdleConfig(u32 AHBPeriph, FunctionalState NewState);
-void SCU_APBPeriphDebugConfig(u32 APBPeriph, FunctionalState NewState);
-void SCU_AHBPeriphDebugConfig(u32 AHBPeriph, FunctionalState NewState);
-void SCU_BRCLKDivisorConfig(u32 BRCLK_Divisor);
-void SCU_TIMCLKSourceConfig(u8 TIMx, u32 TIMCLK_Source);
-void SCU_TIMPresConfig(u8 TIMx, u16 Prescaler);
-void SCU_USBCLKConfig(u32 USBCLK_Source);
-void SCU_PHYCLKConfig(FunctionalState NewState);
-void SCU_FMICLKDivisorConfig(u32 FMICLK_Divisor);
-void SCU_EMIBCLKDivisorConfig(u32 SCU_EMIBCLK);
-void SCU_EMIModeConfig(u32 SCU_EMIMODE);
-void SCU_EMIALEConfig(u32 SCU_EMIALE_LEN, u32 SCU_EMIALE_POL);
-void SCU_ITConfig(u32 SCU_IT, FunctionalState NewState);
-FlagStatus SCU_GetFlagStatus(u32 SCU_Flag);
-void SCU_ClearFlag(u32 SCU_Flag);
-u32 SCU_GetPLLFreqValue(void);
-u32 SCU_GetMCLKFreqValue(void);
-u32 SCU_GetRCLKFreqValue(void);
-u32 SCU_GetHCLKFreqValue(void);
-u32 SCU_GetPCLKFreqValue(void);
-void SCU_WakeUpLineConfig(u8 EXTint);
-void SCU_SpecIntRunModeConfig(FunctionalState NewState);
-void SCU_EnterIdleMode(void);
-void SCU_EnterSleepMode(void);
-void SCU_UARTIrDASelect(UART_TypeDef * UARTx, u8 UART_IrDA_Mode);
-void SCU_PFQBCCmd(FunctionalState NewState);
-
-#endif /*__91x_SCU_H*/
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_test_lcd/include/91x_type.h b/uc_str912/prj_test_lcd/include/91x_type.h deleted file mode 100644 index 916d81c..0000000 --- a/uc_str912/prj_test_lcd/include/91x_type.h +++ /dev/null @@ -1,50 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_type.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : It contains common types and constants used in all the
-* peripherals' drivers.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-**********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*********************************************************************************/
-
-#ifndef __91x_type_H
-#define __91x_type_H
-
- typedef long long u64;
- typedef unsigned long u32;
- typedef unsigned short u16;
- typedef unsigned char u8;
-
- typedef signed long s32;
- typedef signed short s16;
- typedef signed char s8;
-
- typedef volatile unsigned long vu32;
- typedef volatile unsigned short vu16;
- typedef volatile unsigned char vu8;
-
- typedef volatile signed long vs32;
- typedef volatile signed short vs16;
- typedef volatile signed char vs8;
-
-typedef enum { FALSE = 0, TRUE = !FALSE } bool;
-
-typedef enum { RESET = 0, SET = !RESET } FlagStatus, ITStatus;
-
-typedef enum { DISABLE = 0, ENABLE = !DISABLE} FunctionalState;
-
-typedef enum { ERROR = 0, SUCCESS = !ERROR} ErrorStatus;
-
-#endif /* __91x_type_H */
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_test_lcd/include/char_code.h b/uc_str912/prj_test_lcd/include/char_code.h deleted file mode 100644 index 51775e3..0000000 --- a/uc_str912/prj_test_lcd/include/char_code.h +++ /dev/null @@ -1,79 +0,0 @@ -#ifndef char_code
-#define char_code
-
-#define A 65
-#define B 66
-#define C 67
-#define D 68
-#define E 69
-#define F 70
-#define G 71
-#define H 72
-#define I 73
-#define J 74
-#define K 75
-#define L 76
-#define M 77
-#define N 78
-#define O 79
-#define P 80
-#define Q 81
-#define R 82
-#define S 83
-#define T 84
-#define U 85
-#define V 86
-#define W 87
-#define X 88
-#define Y 89
-#define Z 90
-
-#define a 97
-#define b 98
-#define c 99
-#define d 100
-#define e 101
-#define f 102
-#define g 103
-#define h 104
-#define i 105
-#define j 106
-#define k 107
-#define l 108
-#define m 109
-#define n 110
-#define o 111
-#define p 112
-#define q 113
-#define r 114
-#define s 115
-#define t 116
-#define u 117
-#define v 118
-#define w 119
-#define x 120
-#define y 121
-#define z 122
-
-/*
-#define . 46
-#define , 44
-#define - 45
-#define ( 40
-#define ) 41
-#define [ 91
-#define ] 93
-#define { 123
-#define } 125
-#define : 58
-#define ; 59
-#define ! 33
-#define % 37
-#define * 42
-#define + 43
-#define = 61
-*/
-
-#define space 32
-
-#endif
diff --git a/uc_str912/prj_test_lcd/include/lcd_lib_91x.h b/uc_str912/prj_test_lcd/include/lcd_lib_91x.h deleted file mode 100644 index bdc4fdb..0000000 --- a/uc_str912/prj_test_lcd/include/lcd_lib_91x.h +++ /dev/null @@ -1,63 +0,0 @@ -/******************** (C) COPYRIGHT 2007 PROPOX ********************************
-* File Name : lcd_lib_91x.h
-* Author : PROPOX Team
-* Date First Issued : 09/24/2007 : Version 1.0
-* Description : This file provides all the 2x16 LCD functions.
-********************************************************************************
-* History:
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, PROPOX SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT OR
-* CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion ------------------------------------ */
-#ifndef _lcd_lib_91x_H
-#define _lcd_lib_91x_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_lib.h"
-#include "91x_gpio.h"
-
-/* Private Definision */
-#define D7_set GPIO_WriteBit(GPIO8, GPIO_Pin_3, Bit_SET)
-#define D6_set GPIO_WriteBit(GPIO8, GPIO_Pin_2, Bit_SET)
-#define D5_set GPIO_WriteBit(GPIO8, GPIO_Pin_1, Bit_SET)
-#define D4_set GPIO_WriteBit(GPIO8, GPIO_Pin_0, Bit_SET)
-
-#define D7_reset GPIO_WriteBit(GPIO8, GPIO_Pin_3, Bit_RESET)
-#define D6_reset GPIO_WriteBit(GPIO8, GPIO_Pin_2, Bit_RESET)
-#define D5_reset GPIO_WriteBit(GPIO8, GPIO_Pin_1, Bit_RESET)
-#define D4_reset GPIO_WriteBit(GPIO8, GPIO_Pin_0, Bit_RESET)
-
-#define RS_set GPIO_WriteBit(GPIO8, GPIO_Pin_4, Bit_SET)
-#define E_set GPIO_WriteBit(GPIO8, GPIO_Pin_5, Bit_SET)
-
-#define RS_reset GPIO_WriteBit(GPIO8, GPIO_Pin_4, Bit_RESET)
-#define E_reset GPIO_WriteBit(GPIO8, GPIO_Pin_5, Bit_RESET)
-
-void delay(int time);
-void LCDinit(void);
-void LCDsendChar(u8 ch);
-void LCDsendCommand(u8 cmd);
-void LCDclr(void);
-void LCDhome(void);
-void LCDstring(u8* data, u8 nBytes);
-void LCDGotoXY(u8 row, u8 column);
-void LCDshiftLeft(u8 right);
-void LCDshiftRight(u8 left);
-void LCDcursorOn(void);
-void LCDcursorOnBlink(void);
-void LCDcursorOFF(void);
-void LCDblank(void);
-void LCDvisible(void);
-void LCDcursorLeft(u8 left);
-void LCDcursorRight(u8 right);
-
-#endif /* _lcd_lib_91x_H */
-
-
-/******************* (C) COPYRIGHT 2007 PROPOX *****END OF FILE****/
diff --git a/uc_str912/prj_test_lcd/include/vectors.h b/uc_str912/prj_test_lcd/include/vectors.h deleted file mode 100644 index d48e61f..0000000 --- a/uc_str912/prj_test_lcd/include/vectors.h +++ /dev/null @@ -1,67 +0,0 @@ -/***********************************************************************************
-* Copyright 2005 Anglia Design
-* This demo code and associated components are provided as is and has no warranty,
-* implied or otherwise. You are free to use/modify any of the provided
-* code at your own risk in your applications with the expressed limitation
-* of liability (see below)
-*
-* LIMITATION OF LIABILITY: ANGLIA OR ANGLIA DESIGNS SHALL NOT BE LIABLE FOR ANY
-* LOSS OF PROFITS, LOSS OF USE, LOSS OF DATA, INTERRUPTION OF BUSINESS, NOR FOR
-* INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND WHETHER UNDER
-* THIS AGREEMENT OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-*
-* Author : Spencer Oliver
-* Web : www.anglia-designs.com
-*
-***********************************************************************************/
-
-#ifndef _VECTOR_H
-#define _VECTOR_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-void Undefined_Handler(void);
-void FIQ_Handler(void);
-void SWI_Handler(void);
-void Prefetch_Handler(void);
-void Abort_Handler(void);
-void WDG_IRQHandler(void);
-void SW_IRQHandler(void);
-void ARMRX_IRQHandler(void);
-void ARMTX_IRQHandler(void);
-void TIM0_IRQHandler(void);
-void TIM1_IRQHandler(void);
-void TIM2_IRQHandler(void);
-void TIM3_IRQHandler(void);
-void USBHP_IRQHandler(void);
-void USBLP_IRQHandler(void);
-void SCU_IRQHandler(void);
-void ENET_IRQHandler(void);
-void DMA_IRQHandler(void);
-void CAN_IRQHandler(void);
-void MC_IRQHandler(void);
-void ADC_IRQHandler(void);
-void UART0_IRQHandler(void);
-void UART1_IRQHandler(void);
-void UART2_IRQHandler(void);
-void I2C0_IRQHandler(void);
-void I2C1_IRQHandler(void);
-void SSP0_IRQHandler(void);
-void SSP1_IRQHandler(void);
-void LVD_IRQHandler(void);
-void RTC_IRQHandler(void);
-void WIU_IRQHandler(void);
-void EXTIT0_IRQHandler(void);
-void EXTIT1_IRQHandler(void);
-void EXTIT2_IRQHandler(void);
-void EXTIT3_IRQHandler(void);
-void USBWU_IRQHandler(void);
-void PFQBC_IRQHandler(void);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif //_VECTOR_H
diff --git a/uc_str912/prj_test_lcd/load_amontec.gdb b/uc_str912/prj_test_lcd/load_amontec.gdb deleted file mode 100644 index 8767ed9..0000000 --- a/uc_str912/prj_test_lcd/load_amontec.gdb +++ /dev/null @@ -1,15 +0,0 @@ -set complaints 1 -set output-radix 16 -set input-radix 16 -set prompt (arm-gdb) - -set remote hardware-breakpoint-limit 2 -set remote hardware-watchpoint-limit 2 - -target remote localhost:3333 - -monitor reset init -monitor halt - -load lcd.elf -file lcd.elf diff --git a/uc_str912/prj_test_lcd/load_segger.gdb b/uc_str912/prj_test_lcd/load_segger.gdb deleted file mode 100644 index cd9fd7e..0000000 --- a/uc_str912/prj_test_lcd/load_segger.gdb +++ /dev/null @@ -1,20 +0,0 @@ -set complaints 1 -set output-radix 16 -set input-radix 16 -set prompt (arm-gdb) - -target remote localhost:2331 - -monitor speed adaptive -monitor endian little - -monitor reset -monitor flash device = STR912FAW44 -monitor flash breakpoints = 1 -monitor flash download = 1 -monitor halt - - -pwd -load lcd.elf -file lcd.elf diff --git a/uc_str912/prj_test_lcd/src/lcd.c b/uc_str912/prj_test_lcd/src/lcd.c deleted file mode 100644 index 9eae1c1..0000000 --- a/uc_str912/prj_test_lcd/src/lcd.c +++ /dev/null @@ -1,93 +0,0 @@ -/******************************************************************************
- * www.propox.com
- * MMstr912 - Minimodu³ Ethernetowy z procesorem ARM9 STR912.
- * Ethernet minimodule with ARM9 STR912 microcontroller.
- *
- * LCD Test - wyswietla tekst 'www.propox.com' na LCD
- * put text 'www.propox.com' on LCD
- *
- * P8.0, P8.1, P8.2, P8.3 - D4, D5, D6, D7
- * P8.4, P8.5 - RS, E
-
- * Includes ------------------------------------------------------------------*/
-/* Pliki nag³ówkowe ----------------------------------------------------------*/
-/* Library includes. */
-#include "91x_lib.h"
-#include "91x_gpio.h"
-#include "91x_map.h"
-#include "91x_scu.h"
-#include "char_code.h"
-#include "lcd_lib_91x.h"
-
-//#include <targets/STR912FW44.h> rem BLa
-
-/* Hardware Configuration */
-/* Konfiguracja sprzetu */
-void HardwareConf(void)
-{
- //Main clock as exesternal oscillator 25MHz
- //G³ówny zegar to kwarc 25MHz
- SCU_MCLKSourceConfig(SCU_MCLK_OSC);
- //Disable reset for GPIO8
- //wylaczenie resetu na GPIO8
- SCU_APBPeriphReset(__GPIO8, DISABLE);
- //Enable clock for GPIO8
- //W³¹czenie zegara na GPIO8
- SCU_APBPeriphClockConfig(__GPIO8, ENABLE);
-}
-
-
-/* Ports Configuration */
-/* Konfiguracja protow */
-void LCD_DataLinesConfig()
-{
- /* Private typedef */
- /* Deklaracja struktury */
- GPIO_InitTypeDef GPIO_InitStructure;
-
- /* Configure D7~D4 data lines in Output Push-Pull mode */
- /* Konfiguracja lini portu 8 jako wyjsc D7-D4 w trybie push-pull */
- GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_3 | GPIO_Pin_4 | GPIO_Pin_5;
- GPIO_InitStructure.GPIO_Alternate = GPIO_OutputAlt1;
- GPIO_InitStructure.GPIO_Direction = GPIO_PinOutput;
- GPIO_InitStructure.GPIO_Type = GPIO_Type_PushPull;
- GPIO_Init(GPIO8, &GPIO_InitStructure);
-
-}
-
-
-int main()
-{
-u8 web[] = "www.propox.com";
-u8 title[] = "MMstr912";
-
-//Hardware Configuration
-//Konfiguracja sprzetu
-HardwareConf();
-//Ports Configuration
-//Konfiguracja portow
-LCD_DataLinesConfig();
-
-LCDinit();
-LCDcursorOFF();
-LCDGotoXY(0,0);
-LCDstring(web,14);
-delay(250000);
-LCDGotoXY(3,1);
-LCDstring(title,8);
-
-while(1)
-{
- delay(500000);
- LCDshiftLeft(1);
- delay(100000);
- LCDshiftLeft(1);
-
- delay(500000);
- LCDshiftRight(1);
- delay(100000);
- LCDshiftRight(1);
-}
-
-return 0;
-}
diff --git a/uc_str912/prj_test_lcd/src/lcd_lib_91x.c b/uc_str912/prj_test_lcd/src/lcd_lib_91x.c deleted file mode 100644 index 7c01f53..0000000 --- a/uc_str912/prj_test_lcd/src/lcd_lib_91x.c +++ /dev/null @@ -1,455 +0,0 @@ -/******************** (C) COPYRIGHT 2007 PROPOX ********************************
-* File Name : lcd_lib_91x.c
-* Author : PROPOX Team
-* Date First Issued : 09/24/2007 : Version 1.0
-* Description : This file provides all the 2x16 LCD functions.
-********************************************************************************
-* History:
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, PROPOX SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT OR
-* CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_lib.h"
-#include "91x_gpio.h"
-#include "91x_map.h"
-#include "91x_scu.h"
-#include "lcd_lib_91x.h"
-
-
-/*******************************************************************************
-* Function Name : delay
-* Description : Delay (opoznienie)
-*
-* Input : time - number of cycles
-* Output : None
-* Return : None
-*******************************************************************************/
-void delay(int time)
-{
- while(time--)
- asm volatile ("nop");
-}
-
-/*******************************************************************************
-* Function Name : LCDinit
-* Description : Inicialize LCD (Inicjalizacja LCD)
-* (4 bit data, 2 lines, characters 5x7, blinking cursor on)
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void LCDinit(void)
-{
- GPIO_Write(GPIO8, 0x00);
- delay(375000); //15ms
- //--------- Write 0x03 -----------
- D7_reset;
- D6_reset;
- D5_set;
- D4_set;
- E_set;
- delay(25000); //1ms
- E_reset;
- delay(125000); //5ms
- //--------- Write 0x03 -----------
- D7_reset;
- D6_reset;
- D5_set;
- D4_set;
- E_set;
- delay(25000); //1ms
- E_reset;
- delay(25000); //1ms
- //--------- Write 0x03 -----------
- D7_reset;
- D6_reset;
- D5_set;
- D4_set;
- E_set;
- delay(25000); //1ms
- E_reset;
- delay(25000); //1ms
- //--------- Enable Four Bit Mode ----------
- D7_reset;
- D6_reset;
- D5_set;
- D4_reset;
- E_set;
- delay(25000); //1ms
- E_reset;
- delay(25000); //1ms
- //---------- Set Interface Length ----------
- //Write 0x2 - 4 bits
- D7_reset;
- D6_reset;
- D5_set;
- D4_reset;
- E_set;
- delay(25000); //1ms
- E_reset;
- delay(25000); //1ms
- //Write 0x8 - 2 lines, 5x7
- D7_set;
- D6_reset;
- D5_reset;
- D4_reset;
- E_set;
- delay(25000); //1ms
- E_reset;
- delay(25000); //1ms
- //---------- Turn off the Display ----------
- //Write 0x0
- D7_reset;
- D6_reset;
- D5_reset;
- D4_reset;
- E_set;
- delay(25000); //1ms
- E_reset;
- delay(25000); //1ms
- //Write 0x8
- D7_set;
- D6_reset;
- D5_reset;
- D4_reset;
- E_set;
- delay(25000); //1ms
- E_reset;
- delay(25000); //1ms
- //------------ Clear the Display -----------
- //Write 0x0
- D7_reset;
- D6_reset;
- D5_reset;
- D4_reset;
- E_set;
- delay(25000); //1ms
- E_reset;
- delay(25000); //1ms
- //Write 0x1
- D7_reset;
- D6_reset;
- D5_reset;
- D4_set;
- E_set;
- delay(25000); //1ms
- E_reset;
- delay(25000); //1ms
- //-------- Set Cursor Move Direction --------
- //Write 0x0
- D7_reset;
- D6_reset;
- D5_reset;
- D4_reset;
- E_set;
- delay(25000); //1ms
- E_reset;
- delay(25000); //1ms
- //Write 0x6 - Increment the Cursor
- D7_reset;
- D6_set;
- D5_set;
- D4_reset;
- E_set;
- delay(25000); //1ms
- E_reset;
- delay(25000); //1ms
- //---------- Enable Display/Cursor ----------
- //Write 0x0
- D7_reset;
- D6_reset;
- D5_reset;
- D4_reset;
- E_set;
- delay(25000); //1ms
- E_reset;
- delay(25000); //1ms
- //Write 0xF - Display on, cursor on, blink on
- D7_set;
- D6_set;
- D5_set;
- D4_set;
- E_set;
- delay(25000); //1ms
- E_reset;
- delay(25000); //1ms
-}
-
-/*******************************************************************************
-* Function Name : LCDsendChar
-* Description : Send Char to LCD (Wyslanie znaku na LCD)
-*
-* Input : ch - is a ascii code of character or char from char_code.h
-* Output : None
-* Return : None
-*******************************************************************************/
-void LCDsendChar(u8 ch)
-{
- //4 MSB bits
- //4 starsze bity
- GPIO_Write(GPIO8, (ch>>4) & 0x0f);
- RS_set;
- E_set;
- delay(25000);
- E_reset;
- delay(25000);
- //4 LSB bits
- //4 mlodsze bity
- GPIO_Write(GPIO8, ch & 0x0f);
- RS_set;
- E_set;
- delay(25000);
- E_reset;
- delay(25000);
-}
-
-/*******************************************************************************
-* Function Name : LCDsendCommand
-* Description : Send Command to LCD (Wyslanie rozkazu do LCD)
-*
-* Input : cmd - is a ascii code of command
-* Output : None
-* Return : None
-*******************************************************************************/
-void LCDsendCommand(u8 cmd)
-{
- //4 MSB bits
- //4 starsze bity
- GPIO_Write(GPIO8, (cmd>>4) & 0x0f);
- RS_reset;
- E_set;
- delay(25000);
- E_reset;
- delay(25000);
- //4 LSB bits
- //4 mlodsze bity
- GPIO_Write(GPIO8, cmd & 0x0f);
- RS_reset;
- E_set;
- delay(25000);
- E_reset;
- delay(25000);
-}
-
-/*******************************************************************************
-* Function Name : LCDclr
-* Description : Clear LCD (Czyszczenie LCD)
-*
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void LCDclr(void)
-{
- LCDsendCommand(0x01);
-}
-
-/*******************************************************************************
-* Function Name : LCDhome
-* Description : LCD cursor home (Przesuniecie kursora na pozycje poczatkowa)
-*
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void LCDhome(void)
-{
- LCDsendCommand(0x02);
-}
-
-/*******************************************************************************
-* Function Name : LCDstring
-* Description : Outputs string to LCD (Wyswietl ciag znakow na LCD)
-*
-* Input : data - pointer to start of table, nBytes - nuber of bytes to send
-* Output : None
-* Return : None
-*******************************************************************************/
-void LCDstring(u8* data, u8 nBytes)
-{
- u8 count;
- //check to make sure we have a good pointer
- //sprawdzenie zgodnosci wskaznika
- if (!data) return;
-
- //print data
- //wyswietl znaki
- for(count=0; count<nBytes; count++)
- {
- LCDsendChar(data[count]);
- }
-}
-
-/*******************************************************************************
-* Function Name : LCDGotoXY
-* Description : Cursor to X Y position (Kursor na pozycje XY)
-*
-* Input : row - x position, column - y position
-* Output : None
-* Return : None
-*******************************************************************************/
-void LCDGotoXY(u8 row, u8 column)
-{
-#define LCD_DDRAM 7
-
-#define LCD_LINE0_DDRAMADDR 0x00
-#define LCD_LINE1_DDRAMADDR 0x40
-#define LCD_LINE2_DDRAMADDR 0x14
-#define LCD_LINE3_DDRAMADDR 0x54
-
- u8 DDRAMAddr;
- //remap lines into proper order
- //wyznaczenie adresu polozenia
- switch(column)
- {
- case 0: DDRAMAddr = LCD_LINE0_DDRAMADDR + row; break;
- case 1: DDRAMAddr = LCD_LINE1_DDRAMADDR + row; break;
- case 2: DDRAMAddr = LCD_LINE2_DDRAMADDR + row; break;
- case 3: DDRAMAddr = LCD_LINE3_DDRAMADDR + row; break;
- default: DDRAMAddr = LCD_LINE0_DDRAMADDR + row;
- }
- //set data address
- //wyslanie adresu
- LCDsendCommand(1<<LCD_DDRAM | DDRAMAddr);
-}
-
-/*******************************************************************************
-* Function Name : LCDshiftLeft
-* Description : Scrol n of characters Right (Przsuniecie znakow o n w prawo)
-*
-* Input : right - number of characters
-* Output : None
-* Return : None
-*******************************************************************************/
-void LCDshiftLeft(u8 right)
-{
-u8 count;
- for (count=0;count<right;count++)
- {
- LCDsendCommand(0x1E);
- }
-}
-
-/*******************************************************************************
-* Function Name : LCDshiftRight
-* Description : Scrol n of characters Left (Przsuniecie znakow o n w lewo)
-*
-* Input : left - number of characters
-* Output : None
-* Return : None
-*******************************************************************************/
-void LCDshiftRight(u8 left)
-{
-u8 count;
- for (count=0;count<left;count++)
- {
- LCDsendCommand(0x18);
- }
-}
-
-/*******************************************************************************
-* Function Name : LCDcursorOn
-* Description : Displays LCD cursor (Kursor aktywny)
-*
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void LCDcursorOn(void)
-{
- LCDsendCommand(0x0E);
-}
-
-/*******************************************************************************
-* Function Name : LCDcursorOnBlink
-* Description : Displays LCD blinking cursor (Migajacy kursor aktywny)
-*
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void LCDcursorOnBlink(void)
-{
- LCDsendCommand(0x0F);
-}
-
-/*******************************************************************************
-* Function Name : LCDcursorOFF
-* Description : Turns OFF cursor (Kursor wylaczony)
-*
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void LCDcursorOFF(void)
-{
- LCDsendCommand(0x0C);
-}
-
-/*******************************************************************************
-* Function Name : LCDblank
-* Description : Blanks LCD (LCD nieaktywny)
-*
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void LCDblank(void)
-{
- LCDsendCommand(0x08);
-}
-
-/*******************************************************************************
-* Function Name : LCDvisible
-* Description : Shows LCD (LCD aktywny)
-*
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void LCDvisible(void)
-{
- LCDsendCommand(0x0C);
-}
-
-/*******************************************************************************
-* Function Name : LCDcursorLeft
-* Description : Moves cursor by n poisitions left (Kursor n pozycji w lewo)
-*
-* Input : left - number of positions
-* Output : None
-* Return : None
-*******************************************************************************/
-void LCDcursorLeft(u8 left)
-{
-u8 count;
- for (count=0;count<left;count++)
- {
- LCDsendCommand(0x10);
- }
-}
-
-/*******************************************************************************
-* Function Name : LCDcursorRight
-* Description : Moves cursor by n poisitions right (Kursor n pozycji w prawo)
-*
-* Input : right - number of positions
-* Output : None
-* Return : None
-*******************************************************************************/
-void LCDcursorRight(u8 right)
-{
-u8 count;
- for (count=0;count<right;count++)
- {
- LCDsendCommand(0x14);
- }
-}
-
-/******************* (C) COPYRIGHT 2007 PROPOX *****END OF FILE****/
diff --git a/uc_str912/prj_test_lcd/src/startup.s b/uc_str912/prj_test_lcd/src/startup.s deleted file mode 100644 index cef54d8..0000000 --- a/uc_str912/prj_test_lcd/src/startup.s +++ /dev/null @@ -1,233 +0,0 @@ -/***********************************************************************************
-* Copyright 2005 Anglia Design
-* This demo code and associated components are provided as is and has no warranty,
-* implied or otherwise. You are free to use/modify any of the provided
-* code at your own risk in your applications with the expressed limitation
-* of liability (see below)
-*
-* LIMITATION OF LIABILITY: ANGLIA OR ANGLIA DESIGNS SHALL NOT BE LIABLE FOR ANY
-* LOSS OF PROFITS, LOSS OF USE, LOSS OF DATA, INTERRUPTION OF BUSINESS, NOR FOR
-* INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND WHETHER UNDER
-* THIS AGREEMENT OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-*
-* Author : Spencer Oliver
-* Web : www.anglia-designs.com
-*
-***********************************************************************************/
-
-/**** Startup Code (executed after Reset) ****/
-
-/* Frequency values kHz */
-/* set to suit target hardware */
-
- .equ FOSC, 25000
-
-/* Standard definitions of Mode bits and Interrupt (I & F) flags in PSRs */
-
- .equ Mode_USR, 0x10
- .equ Mode_FIQ, 0x11
- .equ Mode_IRQ, 0x12
- .equ Mode_SVC, 0x13
- .equ Mode_ABT, 0x17
- .equ Mode_UND, 0x1B
- .equ Mode_SYS, 0x1F /* available on ARM Arch 4 and later */
-
- .equ I_Bit, 0x80 /* when I bit is set, IRQ is disabled */
- .equ F_Bit, 0x40 /* when F bit is set, FIQ is disabled */
-
- .equ SRAM32, 0x00
- .equ SRAM64, 0x08
- .equ SRAM96, 0x10
-
-/* --- System memory locations */
-
- .equ SCRO_AHB_UMB, 0x5C002034 /* System configuration register 0 (unbuffered) */
-
- .equ FMI_BASE_UMB, 0x54000000 /* Flash FMI base address (unbuffered) */
- .equ BBSR_off_addr, 0x00
- .equ NBBSR_off_addr, 0x04
- .equ BBADR_off_addr, 0x0C
- .equ NBBADR_off_addr, 0x10
- .equ CR_off_addr, 0x18
-
-.ifndef LIBUFF
- .equ LIBUFF, 0
-.endif
-
-/* Startup Code must be linked first at Address at which it expects to run. */
-
- .text
- .arm
- .section .init, "ax"
-
- .global _start
- .global _Main_Crystal
-
-/* After remap this will be our reset handler */
-
-_start:
- LDR pc, =NextInst
-NextInst:
-
- NOP /* Wait for OSC stabilization */
- NOP
- NOP
- NOP
- NOP
- NOP
- NOP
- NOP
- NOP
-
-/* Enable buffered mode */
-
-.if LIBUFF
- MRC p15, 0, r0, c1, c0, 0 /* Read CP15 register 1 into r0 */
- ORR r0, r0, #0x8 /* Enable Write Buffer on AHB */
- MCR p15, 0, r0, c1, c0, 0 /* Write CP15 register 1 */
-.endif
-
-/* Remap Flash Bank 0 at address 0x0 and Bank 1 at address 0x80000, */
-/* when the bank 0 is the boot bank, then enable the Bank 1. */
-
- LDR r0, =FMI_BASE_UMB
- LDR r1, =0x4 /* configure 512KB Boot bank 0 */
- STR r1, [r0, #BBSR_off_addr]
-
- LDR r1, =0x2 /* configure 32KB Non Boot bank 1 */
- STR r1, [r0, #NBBSR_off_addr]
-
- LDR r1, =(0x00000000 >> 2) /* Boot Bank Base Address */
- STR r1, [r0, #BBADR_off_addr]
-
- LDR r1, =(0x00080000 >> 2) /* Non Boot Bank Base Address */
- STR r1, [r0, #NBBADR_off_addr]
-
- LDR r1, =0x18 /* Flash Banks 0 1 enabled */
- STR r1, [r0, #CR_off_addr]
-
-/* Enable 96K RAM */
-
- LDR r0, =SCRO_AHB_UMB
-# LDR r1, =0x0196 /* prefetch disabled, default enabled */
- LDR r1, =0x0187|SRAM96
- STR r1, [r0]
-
-/* Set bits 17-18 (Instruction/Data TCM order) of the */
-/* Core Configuration Control Register */
-
- MOV r0, #0x60000
- MCR p15, 0x1, r0, c15, c1, 0
-
-/* Setup Stack for each mode */
-
-/* Enter Abort Mode and set its Stack Pointer */
-
- MSR cpsr_c, #Mode_ABT|I_Bit|F_Bit
- LDR sp, =__stack_abt_end__
-
-/* Enter Undefined Instruction Mode and set its Stack Pointer */
-
- MSR cpsr_c, #Mode_UND|I_Bit|F_Bit
- LDR sp, =__stack_und_end__
-
-/* Enter Supervisor Mode and set its Stack Pointer */
-
- MSR cpsr_c, #Mode_SVC|I_Bit|F_Bit
- LDR sp, =__stack_svc_end__
-
-/* Enter FIQ Mode and set its Stack Pointer */
-
- MSR cpsr_c, #Mode_FIQ|I_Bit|F_Bit
- LDR sp, =__stack_fiq_end__
-
-/* Enter IRQ Mode and set its Stack Pointer */
-
- MSR cpsr_c, #Mode_IRQ|I_Bit|F_Bit
- LDR sp, =__stack_irq_end__
-
-/* Enter System/User Mode and set its Stack Pointer */
-
- MSR cpsr_c, #Mode_SYS
- LDR sp, =__stack_end__
-
-/* Setup a default Stack Limit (when compiled with "-mapcs-stack-check") */
-
- LDR sl, =__bss_end__
-
-/* Relocate .data section (Copy from ROM to RAM) */
-
- LDR r1, =_etext
- LDR r2, =__data_start
- LDR r3, =_edata
-LoopRel:
- CMP r2, r3
- LDRLO r0, [r1], #4
- STRLO r0, [r2], #4
- BLO LoopRel
-
-/* Clear .bss section (Zero init) */
-
- MOV r0, #0
- LDR r1, =__bss_start__
- LDR r2, =__bss_end__
-LoopZI:
- CMP r1, r2
- STRLO r0, [r1], #4
- BLO LoopZI
-
-/* Call C++ constructors */
-
- LDR r0, =__ctors_start__
- LDR r1, =__ctors_end__
-ctor_loop:
- CMP r0, r1
- BEQ ctor_end
- LDR r2, [r0], #4
- STMFD sp!, {r0-r1}
- BLX r2
- LDMFD sp!, {r0-r1}
- B ctor_loop
-ctor_end:
-
-/* Need to set up standard file handles */
-/* Only used under simulator, normally overide syscall.c */
-
-# BL initialise_monitor_handles
-
-/* if we use debug version of str9lib this will call the init function */
-
- BL libdebug
-libdebug:
-
-/* Enter the C code, use B instruction so as to never return */
-/* use BL main if you want to use c++ destructors below */
-
- B main
-
-/* Call destructors */
-
-# LDR r0, =__dtors_start__
-# LDR r1, =__dtors_end__
-#dtor_loop:
-# CMP r0, r1
-# BEQ dtor_end
-# LDR r2, [r0], #4
-# STMFD sp!, {r0-r1}
-# BLX r2
-# LDMFD sp!, {r0-r1}
-# B dtor_loop
-#dtor_end:
-
-/* Return from main, loop forever. */
-
-#exit_loop:
-# B exit_loop
-
-/* Fosc values, used by libstr9 */
-
-_Main_Crystal: .long FOSC
-
- .weak libdebug
-
- .end
diff --git a/uc_str912/prj_test_lcd/src/vector.s b/uc_str912/prj_test_lcd/src/vector.s deleted file mode 100644 index 7708f54..0000000 --- a/uc_str912/prj_test_lcd/src/vector.s +++ /dev/null @@ -1,202 +0,0 @@ -/***********************************************************************************
-* Copyright 2005 Anglia Design
-* This demo code and associated components are provided as is and has no warranty,
-* implied or otherwise. You are free to use/modify any of the provided
-* code at your own risk in your applications with the expressed limitation
-* of liability (see below)
-*
-* LIMITATION OF LIABILITY: ANGLIA OR ANGLIA DESIGNS SHALL NOT BE LIABLE FOR ANY
-* LOSS OF PROFITS, LOSS OF USE, LOSS OF DATA, INTERRUPTION OF BUSINESS, NOR FOR
-* INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND WHETHER UNDER
-* THIS AGREEMENT OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-*
-* Author : Spencer Oliver
-* Web : www.anglia-designs.com
-*
-***********************************************************************************/
-
- .equ VectorAddress, 0xFFFFF030 /* VIC Vector address register address. */
- .equ VectorAddressDaisy, 0xFC000030 /* Daisy VIC Vector address register */
-
- .equ Mode_USR, 0x10
- .equ Mode_FIQ, 0x11
- .equ Mode_IRQ, 0x12
- .equ Mode_SVC, 0x13
- .equ Mode_ABT, 0x17
- .equ Mode_UND, 0x1B
- .equ Mode_SYS, 0x1F /* available on ARM Arch 4 and later */
-
- .equ I_Bit, 0x80 /* when I bit is set, IRQ is disabled */
- .equ F_Bit, 0x40 /* when F bit is set, FIQ is disabled */
-
- .text
- .arm
- .section .vectors, "ax"
-
- .global Reset_Vec
-
-/* Note: LDR PC instructions are used here, though branch (B) instructions */
-/* could also be used, unless the ROM is at an address >32MB. */
-
-/*******************************************************************************
- Exception vectors
-*******************************************************************************/
-
-Reset_Vec: LDR pc, Reset_Addr /* Reset Handler */
-Undef_Vec: LDR pc, Undefined_Addr
-SWI_Vec: LDR pc, SWI_Addr
-PAbt_Vec: LDR pc, Prefetch_Addr
-DAbt_Vec: LDR pc, Abort_Addr
- NOP /* Reserved vector */
-IRQ_Vec: LDR pc, IRQ_Addr
-FIQ_Vec: LDR pc, FIQ_Addr
-
-/*******************************************************************************
- Exception handlers address table
-*******************************************************************************/
-
-Reset_Addr: .word _start
-Undefined_Addr: .word UndefinedHandler
-SWI_Addr: .word SWIHandler
-Prefetch_Addr: .word PrefetchHandler
-Abort_Addr: .word AbortHandler
- .word 0 /* reserved */
-IRQ_Addr: .word IRQHandler
-FIQ_Addr: .word FIQHandler
-
-/*******************************************************************************
- Exception Handlers
-*******************************************************************************/
-
-/*******************************************************************************
-* Macro Name : SaveContext
-* Description : This macro used to save the context before entering
- an exception handler.
-* Input : The range of registers to store.
-* Output : none
-*******************************************************************************/
-
-.macro SaveContext reg1 reg2
- STMFD sp!,{\reg1-\reg2,lr} /* Save The workspace plus the current return */
- /* address lr_ mode into the stack */
- MRS r1, spsr /* Save the spsr_mode into r1 */
- STMFD sp!, {r1} /* Save spsr */
-.endm
-
-/*******************************************************************************
-* Macro Name : RestoreContext
-* Description : This macro used to restore the context to return from
- an exception handler and continue the program execution.
-* Input : The range of registers to restore.
-* Output : none
-*******************************************************************************/
-
-.macro RestoreContext reg1 reg2
- LDMFD sp!, {r1} /* Restore the saved spsr_mode into r1 */
- MSR spsr_cxsf, r1 /* Restore spsr_mode */
- LDMFD sp!, {\reg1-\reg2,pc}^ /* Return to the instruction following */
- /* the exception interrupt */
-.endm
-
-/*******************************************************************************
-* Function Name : IRQHandler
-* Description : This function called when IRQ exception is entered.
-* Input : none
-* Output : none
-*******************************************************************************/
-
-IRQHandler:
- SUB lr, lr, #4 /* Update the link register */
- SaveContext r0, r12 /* Save the workspace plus the current */
- /* return address lr_irq and spsr_irq */
- LDR r0, =VectorAddress
- LDR r0, [r0] /* Read the routine address */
- LDR r1, =VectorAddressDaisy
- LDR r1, [r1]
- /* Padding between the acknowledge and re-enable of interrupts */
- /* For more details, please refer to the following URL */
- /* http://www.arm.com/support/faqip/3682.html */
- NOP
- NOP
- MSR cpsr_c, #Mode_SYS /* Switch to SYS mode and enable IRQ */
- STMFD sp!, {lr} /* Save the link register. */
- LDR lr, =ReturnAddress /* Read the return address. */
- MOV pc, r0 /* Branch to the IRQ handler. */
-ReturnAddress:
- LDMFD sp!, {lr} /* Restore the link register. */
- MSR cpsr_c, #Mode_IRQ|I_Bit|F_Bit /* Switch to IRQ mode and disable IRQ */
- LDR r0, =VectorAddress /* Write to the VectorAddress to clear the */
- STR r0, [r0] /* respective interrupt in the internal interrupt */
- LDR r1, =VectorAddressDaisy /* Write to the VectorAddressDaisy to clear the */
- STR r1, [r1] /* respective interrupt in the internal interrupt */
- RestoreContext r0, r12 /* Restore the context and return to the program execution. */
-
-/*******************************************************************************
-* Function Name : SWIHandler
-* Description : This function called when SWI instruction executed.
-* Input : none
-* Output : none
-*******************************************************************************/
-
-SWIHandler:
- SaveContext r0, r12 /* r0 holds swi number */
- MOV r1, sp /* load regs */
- BL SWI_Handler
- RestoreContext r0, r12
-
-/*******************************************************************************
-* Function Name : UndefinedHandler
-* Description : This function called when undefined instruction
- exception is entered.
-* Input : none
-* Output : none
-*******************************************************************************/
-
-UndefinedHandler:
- SaveContext r0, r12
- BL Undefined_Handler
- RestoreContext r0, r12
-
-/*******************************************************************************
-* Function Name : PrefetchAbortHandler
-* Description : This function called when Prefetch Abort
- exception is entered.
-* Input : none
-* Output : none
-*******************************************************************************/
-
-PrefetchHandler:
- SUB lr, lr, #4 /* Update the link register. */
- SaveContext r0, r12
- BL Prefetch_Handler
- RestoreContext r0, r12
-
-/*******************************************************************************
-* Function Name : DataAbortHandler
-* Description : This function is called when Data Abort
- exception is entered.
-* Input : none
-* Output : none
-*******************************************************************************/
-
-AbortHandler:
- SUB lr, lr, #8 /* Update the link register. */
- SaveContext r0, r12
- BL Abort_Handler
- RestoreContext r0, r12
-
-/*******************************************************************************
-* Function Name : FIQHandler
-* Description : This function is called when FIQ
- exception is entered.
-* Input : none
-* Output : none
-*******************************************************************************/
-
-FIQHandler:
- SUB lr, lr, #4 /* Update the link register. */
- SaveContext r0, r7
- BL FIQ_Handler
- RestoreContext r0, r7
-
- .end
diff --git a/uc_str912/prj_test_lcd/src/vectors.c b/uc_str912/prj_test_lcd/src/vectors.c deleted file mode 100644 index 4022391..0000000 --- a/uc_str912/prj_test_lcd/src/vectors.c +++ /dev/null @@ -1,462 +0,0 @@ -/***********************************************************************************
-* Copyright 2005 Anglia Design
-* This demo code and associated components are provided as is and has no warranty,
-* implied or otherwise. You are free to use/modify any of the provided
-* code at your own risk in your applications with the expressed limitation
-* of liability (see below)
-*
-* LIMITATION OF LIABILITY: ANGLIA OR ANGLIA DESIGNS SHALL NOT BE LIABLE FOR ANY
-* LOSS OF PROFITS, LOSS OF USE, LOSS OF DATA, INTERRUPTION OF BUSINESS, NOR FOR
-* INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND WHETHER UNDER
-* THIS AGREEMENT OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-*
-* Author : Spencer Oliver
-* Web : www.anglia-designs.com
-*
-***********************************************************************************/
-
-#include "vectors.h"
-
-/*******************************************************************************
-* Function Name : Undefined_Handler
-* Description : This function Undefined instruction exception.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void Undefined_Handler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : SWI_Handler
-* Description : This function handles SW exception.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void SWI_Handler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : Prefetch_Handler
-* Description : This function handles preftetch abort exception.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void Prefetch_Handler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : Abort_Handler
-* Description : This function handles data abort exception.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void Abort_Handler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : FIQ_Handler
-* Description : This function handles FIQ exception.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void FIQ_Handler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : WDG_IRQHandler
-* Description : This function handles the WDG interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void WDG_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : SW_IRQHandler
-* Description : This function handles the SW interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void SW_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : ARMRX_IRQHandler
-* Description : This function handles the ARMRX interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void ARMRX_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : ARMTX_IRQHandler
-* Description : This function handles the ARMTX interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void ARMTX_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : TIM0_IRQHandler
-* Description : This function handles the TIM0 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM0_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : TIM1_IRQHandler
-* Description : This function handles the TIM1 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM1_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : TIM2_IRQHandler
-* Description : This function handles the TIM2 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM2_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : TIM3_IRQHandler
-* Description : This function handles the TIM3 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM3_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : USBHP_IRQHandler
-* Description : This function handles the USBHP interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void USBHP_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : USBLP_IRQHandler
-* Description : This function handles the USBLP interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void USBLP_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : SCU_IRQHandler
-* Description : This function handles the SCU interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : ENET_IRQHandler
-* Description : This function handles the ENET interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void ENET_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : DMA_IRQHandler
-* Description : This function handles the DMA interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void DMA_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : CAN_IRQHandler
-* Description : This function handles the CAN interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void CAN_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : MC_IRQHandler
-* Description : This function handles the MC interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void MC_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : ADC_IRQHandler
-* Description : This function handles the ADC interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void ADC_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : UART0_IRQHandler
-* Description : This function handles the UART0 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void UART0_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : UART1_IRQHandler
-* Description : This function handles the UART1 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void UART1_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : UART2_IRQHandler
-* Description : This function handles the UART2 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void UART2_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : I2C0_IRQHandler
-* Description : This function handles the I2C0 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void I2C0_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : I2C1_IRQHandler
-* Description : This function handles the I2C1 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void I2C1_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : SSP0_IRQHandler
-* Description : This function handles the SSP0 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void SSP0_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : SSP1_IRQHandler
-* Description : This function handles the SSP1 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void SSP1_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : LVD_IRQHandler
-* Description : This function handles the LVD interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void LVD_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : RTC_IRQHandler
-* Description : This function handles the RTC interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void RTC_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : WIU_IRQHandler
-* Description : This function handles the WIU interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void WIU_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : EXTIT0_IRQHandler
-* Description : This function handles the EXTIT0 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void EXTIT0_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : EXTIT1_IRQHandler
-* Description : This function handles the EXTIT1 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void EXTIT1_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : EXTIT2_IRQHandler
-* Description : This function handles the EXTIT2 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void EXTIT2_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : EXTIT3_IRQHandler
-* Description : This function handles the EXTIT3 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void EXTIT3_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : USBWU_IRQHandler
-* Description : This function handles the USBWU interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void USBWU_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : PFQBC_IRQHandler
-* Description : This function handles the PFQBC interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void PFQBC_IRQHandler(void)
-{
- while(1);
-}
diff --git a/uc_str912/prj_test_lcd/str91x_lib/91x_ahbapb.c b/uc_str912/prj_test_lcd/str91x_lib/91x_ahbapb.c deleted file mode 100644 index 41489ac..0000000 --- a/uc_str912/prj_test_lcd/str91x_lib/91x_ahbapb.c +++ /dev/null @@ -1,177 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_ahbapb.c
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file provides all the AHBAPB software functions.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_ahbapb.h"
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-#define AHBAPB_SplitCounter_Mask 0xFFE0FFFF
-#define AHBAPB_SetTimeOut_Mask 0xFFFFFFE0
-#define AHBAPB_Address_Mask 0xFEFFFFFF
-#define AHBAPB_FLAG_RW_Mask 0x01000000
-/*******************************************************************************
-* Function Name : AHBAPB_DeInit
-* Description : Deinitializes the AHBAPBx peripheral registers to their default
-* reset values.
-* Input : AHBAPBx: where x can be 0 or 1 to select the AHBAPB peripheral.
-* Output : None
-* Return : None
-*******************************************************************************/
-void AHBAPB_DeInit(AHBAPB_TypeDef* AHBAPBx)
-{
- AHBAPBx->BCR = 0x00000000;
- AHBAPBx->BSR = 0x00000000;
-}
-/*******************************************************************************
-* Function Name : AHBAPB_Init
-* Description : Initializes the AHBAPBx peripheral according to the specified
-* parameters in the AHBAPB_InitStruct .
-* Input :- AHBAPBx: where x can be 0 or 1 to select the AHBAPB peripheral.
-* - AHBAPB_InitStruct: pointer to a AHBAPB_InitTypeDef structure that
-* contains the configuration information for the specified AHBAPB
-* peripheral.
-* Output : None
-* Return : None
-*******************************************************************************/
-void AHBAPB_Init(AHBAPB_TypeDef* AHBAPBx, AHBAPB_InitTypeDef* AHBAPB_InitStruct)
-{
-
- if(AHBAPB_InitStruct->AHBAPB_Split == AHBAPB_Split_Enable)
- {
- /* Set SPLITEN bit;*/
- AHBAPBx->BCR |= AHBAPB_Split_Enable;
- /*Split_CNT bits[20:16]*/
- AHBAPBx->BCR &= AHBAPB_SplitCounter_Mask;
- AHBAPBx->BCR |= (AHBAPB_InitStruct->AHBAPB_SplitCounter)<<16;
- }
- else
- {
- /*/ Clear SPLITEN bit;*/
- AHBAPBx->BCR &= AHBAPB_Split_Disable;
- }
- /*APB Time out*/
- if(AHBAPB_InitStruct->AHBAPB_Error == AHBAPB_Error_Enable)
- {
- /* Set ERREN bit*/
- AHBAPBx->BCR |= AHBAPB_Error_Enable;
- /*Time ouit counter*/
- AHBAPBx->BCR &= AHBAPB_SetTimeOut_Mask;
- AHBAPBx->BCR |= AHBAPB_InitStruct->AHBAPB_SetTimeOut;
- }
- else
- {
- /* Clear ERREN bit*/
- AHBAPBx->BCR &= AHBAPB_Error_Disable;
- }
-}
-
-/*******************************************************************************
-* Function Name : AHBAPB_StructInit
-* Description : Initialize the AHBAPB Init Structure parameters
-* Input : AHBAPB_InitStruct : pointer to a AHBAPB_InitTypeDef structure
-* which will be initialized.
-* Output : None
-* Return : None
-*******************************************************************************/
-void AHBAPB_StructInit(AHBAPB_InitTypeDef* AHBAPB_InitStruct)
-{
- /* Reset AHBAPB init structure parameters values */
- AHBAPB_InitStruct->AHBAPB_Split = AHBAPB_Split_Enable;
- AHBAPB_InitStruct->AHBAPB_SplitCounter = 0xFF;
- AHBAPB_InitStruct->AHBAPB_Error = AHBAPB_Error_Enable;
- AHBAPB_InitStruct->AHBAPB_SetTimeOut = 0xFF;
-
-}
-
-/*******************************************************************************
-* Function Name : AHBAPB_GetFlagStatus
-* Description : Checks whether the specified AHBAPB flag is set or not.
-* Input : - AHBAPB: where x can be 0 or 1 to select the AHBAPB peripheral
-* - AHBAPB_FLAG: specifies the flag to check.
-* This parameter can be one of the following values:
-* - AHBAPB_FLAG_ERROR: error flag
-* - AHBAPB_FLAG_OUTM : Out of Memory flag
-* - AHBAPB_FLAG_APBT : APB Time-out flag
-* - AHBAPB_FLAG_RW : Access type flag
-* Output : None
-* Return : The new state of AHBAPB_FLAG (SET or RESET).
-*******************************************************************************/
-FlagStatus AHBAPB_GetFlagStatus(AHBAPB_TypeDef* AHBAPBx, u8 AHBAPB_FLAG)
-{
- if(AHBAPB_FLAG == AHBAPB_FLAG_RW)
- {
- if ((AHBAPBx->PAER & AHBAPB_FLAG_RW_Mask) == RESET)
- {
- return RESET;
- }
- else
- {
- return SET;
- }
- }
- else
- {
- if ((AHBAPBx->BSR & AHBAPB_FLAG) == RESET)
- {
- return RESET;
- }
- else
- {
- return SET;
- }
- }
-}
-/*******************************************************************************
-* Function Name : AHBAPB_ClearFlag
-* Description : Clears the AHBAPBx flags.
-* Input : - AHBAPB: where x can be 0 or 1 to select the AHBAPB peripheral
-* - AHBAPB_FLAG: flags to clear. This parameter one of the
-* following values:
-* - AHBAPB_FLAG_ERROR: error flag
-* - AHBAPB_FLAG_OUTM : Out of Memory flag
-* - AHBAPB_FLAG_APBT : APB Time-out flag
-* Output : None
-* Return : None
-*******************************************************************************/
-void AHBAPB_ClearFlag(AHBAPB_TypeDef* AHBAPBx, u8 AHBAPB_FLAG)
-{
- /* Clear the flag */
- AHBAPBx->BSR &= AHBAPB_FLAG;
-}
-/*******************************************************************************
-* Function Name : AHBAPB_GetPeriphAddrError
-* Description : Gets the AHBAPB error address peripherals.
-* Input : - AHBAPB: where x can be 0 or 1 to select the AHBAPB peripheral
-* Output : None
-* Return : The Peropheral address error
-*******************************************************************************/
-u32 AHBAPB_GetPeriphAddrError(AHBAPB_TypeDef* AHBAPBx)
-{
- u32 AHBAPB_Address = 0x00000000;
-
- /*Return Oeripheral address without RW bit*/
- AHBAPB_Address = (AHBAPBx->PAER)& AHBAPB_Address_Mask;
- return (AHBAPB_Address);
-}
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_test_lcd/str91x_lib/91x_fmi.c b/uc_str912/prj_test_lcd/str91x_lib/91x_fmi.c deleted file mode 100644 index fb558ad..0000000 --- a/uc_str912/prj_test_lcd/str91x_lib/91x_fmi.c +++ /dev/null @@ -1,519 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_fmi.c
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file provides all the FMI software functions.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
-* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-
-/* Standard include ----------------------------------------------------------*/
-#include "91x_fmi.h"
-
-/* Include of other module interface headers ---------------------------------*/
-/* Local includes ------------------------------------------------------------*/
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-
-#define TIMEOUT 0xFFFFFF /* Timeout value */
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Interface functions -------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-
-/*******************************************************************************
-* Function Name : FMI_BankRemapConfig
-* Description : Configure the addresses and sizes of bank 0 and bank 1.
-* Input1 : FMI_BootBankSize: specifies the boot bank size.
-* This parameter can be one of the following values:
-* - 0x0: 32KBytes.
-* - 0x1: 64KBytes.
-* - 0x2: 128KBytes.
-* - 0x3: 256KBytes.
-* - 0x4: 512KBytes.
-* ....
-* - 0xB: 64MBytes.
-* Input2 : FMI_NonBootBankSize: specifies the non boot bank size.
-* This parameter can be one of the following values:
-* - 0x0: 8KBytes.
-* - 0x1: 16KBytes.
-* - 0x2: 32KBytes.
-* - 0x3: 64KBytes.
-* ....
-* - 0xD: 64MBytes.
-* Input3 : FMI_BootBankAddress: specifies the address of the boot bank.
-* Input4 : FMI_NonBootBankAddress: specifies the address of the non
-* boot bank.
-* Output : None
-* Return : None
-*******************************************************************************/
-void FMI_BankRemapConfig(u8 FMI_BootBankSize, u8 FMI_NonBootBankSize, \
- u32 FMI_BootBankAddress, u32 FMI_NonBootBankAddress)
-{
- FMI->BBSR = FMI_BootBankSize;
- FMI->NBBSR = FMI_NonBootBankSize;
- FMI->BBADR = (FMI_BootBankAddress >> 2);
- FMI->NBBADR = (FMI_NonBootBankAddress >> 2);
- FMI->CR |= 0x18; /* Enable bank 1 */
-}
-
-/*******************************************************************************
-* Function Name : FMI_Config
-* Description : Configure the FMI.
-* Input1 : FMI_ReadWaitState: specifies the needed read wait states.
-* This parameter can be one of the following values:
-* - FMI_READ_WAIT_STATE_1: One read wait state.
-* - FMI_READ_WAIT_STATE_2: Two read wait states.
-* - FMI_READ_WAIT_STATE_3: Three read wait states.
-* Input2 : FMI_WriteWaitState: specifies the needed write wait states.
-* This parameter can be one of the following values:
-* - FMI_WRITE_WAIT_STATE_1: One write wait state.
-* - FMI_WRITE_WAIT_STATE_2: Two write wait states.
-* Input3 : FMI_PWD: specifies the power down mode status.
-* This parameter can be one of the following values:
-* - FMI_PWD_ENABLE: Enable the PWD.
-* - FMI_PWD_DISABLE: Disable the PWD.
-* Input4 : FMI_LVDEN: specifies the low voltage detector status.
-* This parameter can be one of the following values:
-* - FMI_LVD_ENABLE: Enable the LVD.
-* - FMI_LVD_DISABLE: Disable the LVD.
-* Input5 : FMI_FreqRange: specifies the working frequency range.
-* This parameter can be one of the following values:
-* - FMI_FREQ_LOW: Low working frequency (up to 66MHz).
-* - FMI_FREQ_HIGH: High working frequency (above 66MHz) .
-* Output : None
-* Return : None
-*******************************************************************************/
-void FMI_Config(u16 FMI_ReadWaitState, u32 FMI_WriteWaitState, u16 FMI_PWD,\
- u16 FMI_LVDEN, u16 FMI_FreqRange)
-{
- /* Configure the write wait state value */
- if (FMI_WriteWaitState == FMI_WRITE_WAIT_STATE_1)
- {
- FMI->CR |= FMI_WRITE_WAIT_STATE_1;
- }
- else
- {
- FMI->CR &= FMI_WRITE_WAIT_STATE_0;
- }
-
- /* Write a write flash configuration register command */
- *(vu16 *)FMI_BANK_1 = 0x60;
-
- /* Configure the flash configuration register */
- *(vu16 *)(FMI_BANK_1|FMI_ReadWaitState|FMI_PWD|FMI_LVDEN|FMI_FreqRange) = 0x03;
-}
-
-/*******************************************************************************
-* Function Name : FMI_EraseSector
-* Description : Erase the needed sector.
-* Input : FMI_Sector: specifies the sector to be erased.
-* This parameter can be one of the following values:
-* - FMI_B0S0: FMI bank 0 sector 0.
-* - FMI_B0S1: FMI bank 0 sector 1.
-* - FMI_B0S2: FMI bank 0 sector 2.
-* - FMI_B0S3: FMI bank 0 sector 3.
-* - FMI_B0S4: FMI bank 0 sector 4.
-* - FMI_B0S5: FMI bank 0 sector 5.
-* - FMI_B0S6: FMI bank 0 sector 6.
-* - FMI_B0S7: FMI bank 0 sector 7.
-* - FMI_B1S0: FMI bank 1 sector 0.
-* - FMI_B1S1: FMI bank 1 sector 1.
-* - FMI_B1S2: FMI bank 1 sector 2.
-* - FMI_B1S3: FMI bank 1 sector 3.
-* Output : None
-* Return : None
-*******************************************************************************/
-void FMI_EraseSector(vu32 FMI_Sector)
-{
- /* Write an erase set-up command to the sector */
- *(vu16 *)FMI_Sector = 0x20;
-
- /* Write an erase confirm command to the sector */
- *(vu16 *)FMI_Sector = 0xD0;
-}
-
-/*******************************************************************************
-* Function Name : FMI_EraseBank
-* Description : Erase the needed bank.
-* Input : FMI_Bank: specifies the bank to be erased.
-* This parameter can be one of the following values:
-* - FMI_BANK_0: FMI bank 0.
-* - FMI_BANK_1: FMI bank 1.
-* Output : None
-* Return : None
-*******************************************************************************/
-void FMI_EraseBank(vu32 FMI_Bank)
-{
- /* Write a bank erase set-up command to the bank */
- *(vu16 *)FMI_Bank = 0x80;
-
- /* Write an erase confirm command to the sector */
- *(vu16 *)FMI_Bank = 0xD0;
-}
-
-/*******************************************************************************
-* Function Name : FMI_WriteHalfWord
-* Description : Write a halfword to the needed Flash memory address.
-* Input 1 : FMI_Address: specifies the address offset where the data will
-* be written.
-* Input 2 : FMI_Data: the needed data.
-* Output : None
-* Return : None
-*******************************************************************************/
-void FMI_WriteHalfWord(u32 FMI_Address, u16 FMI_Data)
-{
- /* Write a program command to the sector to be written */
- *(vu16 *)(FMI_Address & 0xFFFFFFFC) = 0x40;
-
- /* Write the halfword to the destination address */
- *(vu16 *)FMI_Address = FMI_Data;
-}
-
-/*******************************************************************************
-* Function Name : FMI_WriteOTPHalfWord
-* Description : Write a halfword to the needed OTP sector address.
-* Input 1 : FMI_OTPHWAddress: specifies the halfword address offset
-* where the data will be written.
-* This parameter can be one of the following values:
-* - FMI_OTP_LOW_HALFWORD_0: OTP Low halfword 0.
-* - FMI_OTP_HIGH_HALFWORD_0: OTP High halfword 0.
-* - FMI_OTP_LOW_HALFWORD_1: OTP Low halfword 1.
-* - FMI_OTP_HIGH_HALFWORD_1: OTP High halfword 1.
-* - FMI_OTP_LOW_HALFWORD_2: OTP Low halfword 2.
-* - FMI_OTP_HIGH_HALFWORD_2: OTP High halfword 2.
-* - FMI_OTP_LOW_HALFWORD_3: OTP Low halfword 3.
-* - FMI_OTP_HIGH_HALFWORD_3: OTP High halfword 3.
-* - FMI_OTP_LOW_HALFWORD_4: OTP Low halfword 4.
-* - FMI_OTP_HIGH_HALFWORD_4: OTP High halfword 4.
-* - FMI_OTP_LOW_HALFWORD_5: OTP Low halfword 5.
-* - FMI_OTP_HIGH_HALFWORD_5: OTP High halfword 5.
-* - FMI_OTP_LOW_HALFWORD_6: OTP Low halfword 6.
-* - FMI_OTP_HIGH_HALFWORD_6: OTP High halfword 6.
-* - FMI_OTP_LOW_HALFWORD_7: OTP Low halfword 7.
-* - FMI_OTP_HIGH_HALFWORD_7: OTP High halfword 7.
-* Input 2 : FMI_OTPData: The needed OTP data.
-* Output : None
-* Return : None
-*******************************************************************************/
-void FMI_WriteOTPHalfWord(u8 FMI_OTPHWAddress, u16 FMI_OTPData)
-{
- /* Write a write OTP command to the needed address */
- *(vu16 *)(FMI_BANK_1) = 0xC0;
-
- /* Write the halfword to the destination address */
- *(vu16 *)(FMI_BANK_1 + FMI_OTPHWAddress) = FMI_OTPData;
-}
-
-/*******************************************************************************
-* Function Name : FMI_ReadWord
-* Description : Read the correspondent data.
-* Input : FMI_Address: specifies the needed address.
-* Output : None
-* Return : The data contained in the specified address.
-*******************************************************************************/
-u32 FMI_ReadWord(u32 FMI_Address)
-{
- return(*(u32*)FMI_Address);
-}
-
-/*******************************************************************************
-* Function Name : FMI_ReadOTPData
-* Description : Read data from the OTP sector.
-* Input : FMI_OTPAddress: specifies the address of the data to be read.
-* This parameter can be one of the following values:
-* - FMI_OTP_WORD_0: FMI bank 0 sector 0.
-* - FMI_OTP_WORD_1: FMI bank 0 sector 1.
-* - FMI_OTP_WORD_2: FMI bank 0 sector 2.
-* - FMI_OTP_WORD_3: FMI bank 0 sector 3.
-* - FMI_OTP_WORD_4: FMI bank 0 sector 4.
-* - FMI_OTP_WORD_5: FMI bank 0 sector 5.
-* - FMI_OTP_WORD_6: FMI bank 0 sector 6.
-* - FMI_OTP_WORD_7: FMI bank 0 sector 7.
-* Output : None
-* Return : The needed OTP words.
-*******************************************************************************/
-u32 FMI_ReadOTPData(u8 FMI_OTPAddress)
-{
- u32 OTP_Data = 0x0;
- /* write a read OTP sector command */
- *(vu16 *)(FMI_BANK_1) = 0x98;
-
- /* Read the correspondent data */
- OTP_Data = (*(vu32*)(FMI_BANK_1 + FMI_OTPAddress));
-
- /* Write a read array command */
- *(vu16 *)(FMI_BANK_1) = 0xFF;
-
- return OTP_Data;
-}
-
-/*******************************************************************************
-* Function Name : FMI_GetFlagStatus
-* Description : Check whether the specified FMI flag is set or not.
-* Input1 : FMI_Flag: flag to check.
-* This parameter can be one of the following values:
-* - FMI_FLAG_SPS: Sector Protection Status Flag.
-* - FMI_FLAG_PSS: Program Suspend Status Flag.
-* - FMI_FLAG_PS: Program Status Flag.
-* - FMI_FLAG_ES: Erase Status Flag.
-* - FMI_FLAG_ESS: Erase Suspend Status Flag.
-* - FMI_FLAG_PECS: FPEC Status Flag.
-* Input2 : FMI_Bank: specifies the needed bank.
-* This parameter can be one of the following values:
-* - FMI_BANK_0: FMI bank 0.
-* - FMI_BANK_1: FMI bank 1.
-* Output : None
-* Return : None
-*******************************************************************************/
-FlagStatus FMI_GetFlagStatus(u8 FMI_Flag, vu32 FMI_Bank)
-{
- u16 FMI_Status_Register = 0;
-
- /* Write a read status register command */
- *(vu16 *)FMI_Bank = 0x70;
-
- /* Wait until operation completion */
- while(!((*(vu16 *)FMI_Bank) & 0x80));
-
- /* Read the status register */
- FMI_Status_Register = *(vu16 *)FMI_Bank;
-
- /* Write a read array command */
- *(vu16 *)FMI_Bank = 0xFF;
-
- if((FMI_Status_Register & FMI_Flag) != RESET)
- {
- return SET;
- }
- else
- {
- return RESET;
- }
-}
-
-/*******************************************************************************
-* Function Name : FMI_GetReadWaitStateValue
-* Description : Get the current Read wait state value.
-* Input : None
-* Output : None
-* Return : The current read wait states value.
-*******************************************************************************/
-u16 FMI_GetReadWaitStateValue(void)
-{
- u16 FMI_Configuration_Register = 0;
- /* Write a read flash configuration register command */
- *(vu16 *)FMI_BANK_1 = 0x90;
-
- /* Read the flash configuration register */
- FMI_Configuration_Register = *(vu16 *)(FMI_BANK_1 + 0x14);
-
- /* Write a read array command */
- *(vu16 *)FMI_BANK_1 = 0xFF;
-
- FMI_Configuration_Register = ((FMI_Configuration_Register>>11) + 1) & 0x3;
-
- /* Return the wait states value */
- return FMI_Configuration_Register;
-}
-
-/*******************************************************************************
-* Function Name : FMI_GetWriteWaitStateValue
-* Description : Get the current write wait state value.
-* Input : None
-* Output : None
-* Return : The current write wait states value.
-*******************************************************************************/
-u16 FMI_GetWriteWaitStateValue(void)
-{
- return ((u16)((FMI->CR & 0x100) >> 8));
-}
-
-/*******************************************************************************
-* Function Name : FMI_SuspendEnable
-* Description : Suspend command enable.
-* Input : FMI_Bank: specifies the bank to be suspended.
-* This parameter can be one of the following values:
-* - FMI_BANK_0: FMI bank 0.
-* - FMI_BANK_1: FMI bank 1.
-* Output : None
-* Return : None
-*******************************************************************************/
-void FMI_SuspendEnable(vu32 FMI_Bank)
-{
- /* Write a suspend command to the bank */
- *(vu16 *)FMI_Bank = 0xB0;
-}
-
-/*******************************************************************************
-* Function Name : FMI_ResumeEnable
-* Description : Resume the suspended command.
-* Input : FMI_Bank: specifies the suspended bank.
-* This parameter can be one of the following values:
-* - FMI_BANK_0: FMI bank 0.
-* - FMI_BANK_1: FMI bank 1.
-* Output : None
-* Return : None
-*******************************************************************************/
-void FMI_ResumeEnable(vu32 FMI_Bank)
-{
- /* Write a resume command to the bank */
- *(vu16 *)FMI_Bank = 0xD0;
-}
-
-/*******************************************************************************
-* Function Name : FMI_ClearFlag
-* Description : Clear the FMI Flags on the correspondent bank.
-* Input : FMI_Bank: specifies the needed bank.
-* This parameter can be one of the following values:
-* - FMI_BANK_0: FMI bank 0.
-* - FMI_BANK_1: FMI bank 1.
-* Output : None
-* Return : None
-*******************************************************************************/
-void FMI_ClearFlag(vu32 FMI_Bank)
-{
- /* Write a clear status register command */
- *(vu16 *)FMI_Bank = 0x50;
-}
-
-/*******************************************************************************
-* Function Name : FMI_WriteProtectionCmd
-* Description : Enable or disable the write protection for the needed sector.
-* Input1 : FMI_Sector: specifies the sector to be protected or
-* unprotected.
-* This parameter can be one of the following values:
-* - FMI_B0S0: FMI bank 0 sector 0.
-* - FMI_B0S1: FMI bank 0 sector 1.
-* - FMI_B0S2: FMI bank 0 sector 2.
-* - FMI_B0S3: FMI bank 0 sector 3.
-* - FMI_B0S4: FMI bank 0 sector 4.
-* - FMI_B0S5: FMI bank 0 sector 5.
-* - FMI_B0S6: FMI bank 0 sector 6.
-* - FMI_B0S7: FMI bank 0 sector 7.
-* - FMI_B1S0: FMI bank 1 sector 0.
-* - FMI_B1S1: FMI bank 1 sector 1.
-* - FMI_B1S2: FMI bank 1 sector 2.
-* - FMI_B1S3: FMI bank 1 sector 3.
-* Input2 : FMI_NewState: specifies the protection status.
-* This parameter can be one of the following values:
-* - ENABLE: Enable the protection.
-* - DISABLE: Disable the protection.
-* Output : None
-* Return : None
-*******************************************************************************/
-void FMI_WriteProtectionCmd(vu32 FMI_Sector, FunctionalState FMI_NewState)
-{
- if (FMI_NewState == ENABLE)
- {
- *(vu16*)FMI_Sector = 0x60;
- *(vu16*)FMI_Sector = 0x01;
- *(vu16*)FMI_Sector = 0xFF;
- }
- else /* DISABLE */
- {
- *(vu16*)FMI_Sector = 0x60;
- *(vu16*)FMI_Sector = 0xD0;
- *(vu16*)FMI_Sector = 0xFF;
- }
-}
-
-/*******************************************************************************
-* Function Name : FMI_GetWriteProtectionStatus
-* Description : Get the write protection status for the needed sector.
-* Input : FMI_Sector_Mask: specifies the needed sector mask.
-* This parameter can be one of the following values:
-* - FMI_B0S0_MASK: FMI bank 0 sector 0.
-* - FMI_B0S1_MASK: FMI bank 0 sector 1.
-* - FMI_B0S2_MASK: FMI bank 0 sector 2.
-* - FMI_B0S3_MASK: FMI bank 0 sector 3.
-* - FMI_B0S4_MASK: FMI bank 0 sector 4.
-* - FMI_B0S5_MASK: FMI bank 0 sector 5.
-* - FMI_B0S6_MASK: FMI bank 0 sector 6.
-* - FMI_B0S7_MASK: FMI bank 0 sector 7.
-* - FMI_B1S0_MASK: FMI bank 1 sector 0.
-* - FMI_B1S1_MASK: FMI bank 1 sector 1.
-* - FMI_B1S2_MASK: FMI bank 1 sector 2.
-* - FMI_B1S3_MASK: FMI bank 1 sector 3.
-* Output : None
-* Return : The Protection Status of the needed sector.
-* - RESET: The needed sector is not write protected.
-* - SET : The needed sector is write protected.
-*******************************************************************************/
-FlagStatus FMI_GetWriteProtectionStatus(u32 FMI_Sector_Mask)
-{
- u16 Protection_Level_1_Register = 0;
- /* Write a read flash protection level 1 register command */
- *(vu16 *)FMI_BANK_1 = 0x90;
-
- /* Read the flash protection level 1 register */
- Protection_Level_1_Register = *(vu16 *)(FMI_BANK_1 + 0x10);
-
- /* Write a read array command */
- *(vu16 *)FMI_BANK_1 = 0xFF;
-
- if (Protection_Level_1_Register &= FMI_Sector_Mask)
- {
- return SET;
- }
- else
- {
- return RESET;
- }
-}
-
-/*******************************************************************************
-* Function Name : FMI_WaitForLastOperation
-* Description : Wait until the last operation (Write halfword, Write OTP
-* halfword, Erase sector and Erase bank) completion.
-* Input : FMI_Bank: specifies the bank where the operation is on going.
-* This parameter can be one of the following values:
-* - FMI_BANK_0: FMI bank 0.
-* - FMI_BANK_1: FMI bank 1.
-* Output : None
-* Return : The timeout status.
-* This parameter can be one of the following values:
-* - FMI_TIME_OUT_ERROR: Timeout error occurred.
-* - FMI_NO_TIME_OUT_ERROR: No timeout error.
-*******************************************************************************/
-u8 FMI_WaitForLastOperation(vu32 FMI_Bank)
-{
- u32 Time_Out = 0;
-
- /* Write a read status register command */
- *(vu16 *)(FMI_Bank) = 0x70;
-
- /* Wait until operation compeletion */
- while((!((*(vu16 *)FMI_Bank) & 0x80))&&(Time_Out < TIMEOUT ))
- {
- Time_Out ++; /* Time Out */
- }
-
- /* Write a read array command */
- *(vu16 *)FMI_Bank = 0xFF;
-
- if (Time_Out == TIMEOUT)
- {
- return FMI_TIME_OUT_ERROR;
- }
- else
- {
- return FMI_NO_TIME_OUT_ERROR;
- }
-}
-
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_test_lcd/str91x_lib/91x_gpio.c b/uc_str912/prj_test_lcd/str91x_lib/91x_gpio.c deleted file mode 100644 index f2d0941..0000000 --- a/uc_str912/prj_test_lcd/str91x_lib/91x_gpio.c +++ /dev/null @@ -1,407 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_gpio.c
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file provides all the GPIO software functions.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_gpio.h"
-#include "91x_scu.h"
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
- static u8 GPIO_GetGPIONumber(GPIO_TypeDef* GPIOx);
-
-/* Private functions ---------------------------------------------------------*/
-
-/*******************************************************************************
-* Function Name : GPIO_DeInit
-* Description : Deinitializes the GPIOx peripheral registers to their default
-* reset values.
-* Input : GPIOx: where x can be (0..9) to select the GPIO peripheral.
-* Output : None
-* Return : None
-*******************************************************************************/
-void GPIO_DeInit(GPIO_TypeDef* GPIOx)
-{
-
- /* Reset the GPIO registers values */
- if(GPIOx == GPIO0)
- {
- SCU_APBPeriphReset(__GPIO0,ENABLE);
- SCU_APBPeriphReset(__GPIO0,DISABLE);
- SCU->GPIOTYPE[0x00] = 0x0000 ;
- SCU->GPIOOUT[0x00] = 0x0000;
- SCU->GPIOIN[0x00] = 0x0000;
- }
-
- if(GPIOx == GPIO1)
- {
- SCU_APBPeriphReset(__GPIO1,ENABLE);
- SCU_APBPeriphReset(__GPIO1,DISABLE);
- SCU->GPIOTYPE[0x01] = 0x0000 ;
- SCU->GPIOOUT[0x01] = 0x0000;
- SCU->GPIOIN[0x01] = 0x0000;
- }
-
- if(GPIOx == GPIO2)
- {
- SCU_APBPeriphReset(__GPIO2,ENABLE);
- SCU_APBPeriphReset(__GPIO2,DISABLE);
- SCU->GPIOTYPE[0x02] = 0x0000 ;
- SCU->GPIOOUT[0x02] = 0x0000;
- SCU->GPIOIN[0x02] = 0x0000;
- }
-
- if(GPIOx == GPIO3)
- {
- SCU_APBPeriphReset(__GPIO3,ENABLE);
- SCU_APBPeriphReset(__GPIO3,DISABLE);
- SCU->GPIOTYPE[0x03] = 0x0000 ;
- SCU->GPIOOUT[0x03] = 0x0000;
- SCU->GPIOIN[0x03] = 0x0000;
- }
-
- if(GPIOx == GPIO4)
- {
- SCU_APBPeriphReset(__GPIO4,ENABLE);
- SCU_APBPeriphReset(__GPIO4,DISABLE);
- SCU->GPIOTYPE[0x04] = 0x0000 ;
- SCU->GPIOOUT[0x04] = 0x0000;
- SCU->GPIOIN[0x04] = 0x0000;
- SCU->GPIOANA = 0x00;
- }
-
- if(GPIOx == GPIO5)
- {
- SCU_APBPeriphReset(__GPIO5,ENABLE);
- SCU_APBPeriphReset(__GPIO5,DISABLE);
- SCU->GPIOTYPE[0x05] = 0x0000 ;
- SCU->GPIOOUT[0x05] = 0x0000;
- SCU->GPIOIN[0x05] = 0x0000;
- }
-
- if(GPIOx == GPIO6)
- {
- SCU_APBPeriphReset(__GPIO6,ENABLE);
- SCU_APBPeriphReset(__GPIO6,DISABLE);
- SCU->GPIOTYPE[0x06] = 0x0000 ;
- SCU->GPIOOUT[0x06] = 0x0000;
- SCU->GPIOIN[0x06] = 0x0000;
- }
-
- if(GPIOx == GPIO7)
- {
- SCU_APBPeriphReset(__GPIO7,ENABLE);
- SCU_APBPeriphReset(__GPIO7,DISABLE);
- SCU->GPIOOUT[0x07] = 0xAAAA;
- SCU->GPIOOUT[0x07] = 0x0000;
- SCU->GPIOIN[0x07] = 0x0000;
- }
-
- if(GPIOx == GPIO8)
- {
- SCU_APBPeriphReset(__GPIO8,ENABLE);
- SCU_APBPeriphReset(__GPIO8,DISABLE);
- SCU->GPIOEMI = 0x00;
- }
-
- if(GPIOx == GPIO9)
- {
- SCU_APBPeriphReset(__GPIO9,ENABLE);
- SCU_APBPeriphReset(__GPIO9,DISABLE);
- SCU->GPIOEMI = 0x00;
- }
-}
-/*******************************************************************************
-* Function Name : GPIO_Init
-* Description : Initializes the GPIOx peripheral according to the specified
-* parameters in the GPIO_InitStruct .
-* Input :- GPIOx: where x can be (0..9) to select the GPIO peripheral.
-* - GPIO_InitStruct: pointer to a GPIO_InitTypeDef structure that
-* contains the configuration information for the specified GPIO
-* peripheral.
-* Output : None
-* Return : None
-*******************************************************************************/
-void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct)
-{
- /* Select pin direction */
- u8 PinNumber = 0;
- u8 Counter = 0;
- u8 GPIO_Number = 0;
-
- GPIO_Number = GPIO_GetGPIONumber(GPIOx);
-
-
- if(GPIO_InitStruct->GPIO_Direction == GPIO_PinOutput)
- {
- GPIOx->DDR |= GPIO_InitStruct->GPIO_Pin;
- }
- else
- {
- GPIOx->DDR &= ~GPIO_InitStruct->GPIO_Pin;
- }
-
- for (Counter = 0; Counter < 8;Counter++)
- {
- /*Search pin number*/
- PinNumber = (GPIO_InitStruct->GPIO_Pin & (1 <<Counter));
- if((PinNumber >> Counter) == 1)
- {
- /*Output ALternate 0*/
- SCU->GPIOOUT[GPIO_Number] &= ~(0x3 <<(Counter *2));
- if(GPIO_InitStruct->GPIO_Alternate == GPIO_OutputAlt1)
- {
- /*Output ALternate 1*/
- SCU->GPIOOUT[GPIO_Number] |= 1 << (Counter *2);
- }
- if(GPIO_InitStruct->GPIO_Alternate == GPIO_OutputAlt2)
- {
- /*Output ALternate 2*/
- SCU->GPIOOUT[GPIO_Number] |= 0x2 << (Counter *2);
- }
- if(GPIO_InitStruct->GPIO_Alternate == GPIO_OutputAlt3)
- {
- /*Output ALternate 3*/
- SCU->GPIOOUT[GPIO_Number] |= 0x3 << (Counter *2);
- }
-
- /*Type configuration: PushPull or Open Collector*/
- SCU->GPIOTYPE[GPIO_Number] &= ~(0x1 << Counter) ;
- if(GPIO_InitStruct->GPIO_Type == GPIO_Type_OpenCollector)
- {
- /*Open Drain configuration*/
- SCU->GPIOTYPE[GPIO_Number] |= 0x1 << Counter;
- }
-
- /*IP Connected disable*/
- SCU->GPIOIN[GPIO_Number] &= ~(0x1 << Counter) ;
- if(GPIO_InitStruct->GPIO_IPConnected == GPIO_IPConnected_Enable)
- {
- /*IP Connected enable*/
- SCU->GPIOIN[GPIO_Number] |= 0x1 << Counter;
- }
- }
- }
-}
-
-/*******************************************************************************
-* Function Name : GPIO_StructInit
-* Description : Initialize the GPIO Init Structure parameters
-* Input : GPIO_InitStruct : pointer to a GPIO_InitTypeDef structure
-* which will be initialized.
-* Output : None
-* Return : None
-*******************************************************************************/
-void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct)
-{
- /* Reset GPIO init structure parameters values */
- GPIO_InitStruct->GPIO_Pin = GPIO_Pin_All;
- GPIO_InitStruct->GPIO_Direction = GPIO_PinInput;
- GPIO_InitStruct->GPIO_Type = GPIO_Type_PushPull;
- GPIO_InitStruct->GPIO_IPConnected = GPIO_IPConnected_Disable;
- GPIO_InitStruct->GPIO_Alternate = GPIO_InputAlt1;
-}
-
-/*******************************************************************************
-* Function Name : GPIO_ReadBit
-* Description : Reads the specified port pin
-* Input : - GPIOx: where x can be (0..9) to select the GPIO peripheral.
-* : - GPIO_Pin: the Pin number. This parameter can be GPIO_Pin_x
-* where x can be (0..7).
-* Output : None
-* Return : The port pin value
-*******************************************************************************/
-u8 GPIO_ReadBit(GPIO_TypeDef* GPIOx, u8 GPIO_Pin)
-{
- if ((((GPIOx->DR[GPIO_Pin<<2])) & GPIO_Pin) != Bit_RESET )
- {
- return Bit_SET;
- }
- else
- {
- return Bit_RESET;
- }
-}
-
-/*******************************************************************************
-* Function Name : GPIO_Read
-* Description : Reads the specified GPIO data port
-* Input : - GPIOx: where x can be (0..9) to select the GPIO peripheral.
-* Output : None
-* Return : GPIO data port word value.
-*******************************************************************************/
-u8 GPIO_Read(GPIO_TypeDef* GPIOx)
-{
- return (GPIOx->DR[0x3FC]);
-}
-
-/*******************************************************************************
-* Function Name : GPIO_WriteBit
-* Description : Sets or clears the selected data port bit.
-* Input : - GPIOx: where x can be (0..9) to select the GPIO peripheral.
-* - GPIO_Pin: the Pin number. This parameter can be GPIO_Pin_x
-* where x can be (0..7).
-* - BitVal: this parameter specifies the value to be written
-* to the selected bit.
-* BitVal must be one of the BitAction enum values:
-* - Bit_RESET: to clear the port pin
-* - Bit_SET: to set the port pin
-* Output : None
-* Return : None
-*******************************************************************************/
-void GPIO_WriteBit(GPIO_TypeDef* GPIOx, u8 GPIO_Pin, BitAction BitVal)
-{
- if(BitVal == Bit_SET)
- {
- GPIOx->DR[GPIO_Pin <<2] = GPIO_Pin;
- }
- else
- {
- GPIOx->DR[GPIO_Pin <<2] = 0x00;
- }
-}
-
-/*******************************************************************************
-* Function Name : GPIO_Write
-* Description : Writes the passed value in the selected data GPIOx port
-* register.
-* Input :- GPIOx: where x can be (0..9) to select the GPIO peripheral.
-* - PortVal: the value to be written to the data port register.
-* Output : None
-* Return : None
-*******************************************************************************/
-void GPIO_Write(GPIO_TypeDef* GPIOx, u8 PortVal)
-{
- GPIOx->DR[0x3FC] = PortVal;
-}
-
-/*******************************************************************************
-* Function Name : GPIO_EMIConfig
-* Description : Enables or disables GPIO 8 and 9 in EMI mode.
-* Input : - NewState: new state of the EMI.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None
-* Return : None
-*******************************************************************************/
-void GPIO_EMIConfig(FunctionalState NewState)
-{
- if(NewState == ENABLE)
- {
- SCU->GPIOEMI = 0x01;
- }
- else
- {
- SCU->GPIOEMI = 0x00;
- }
-}
-
-/*******************************************************************************
-* Function Name : GPIO_ANAPinConfig
-* Description : Enables or disables pins from GPIO 4 in Analogue mode.
-* Input :- GPIO_ANAChannel: selects the ADC channel pin.
-* This parameter can be one of the following values:
-* GPIO_ANAChannel0
-* GPIO_ANAChannel1
-* GPIO_ANAChannel2
-* GPIO_ANAChannel3
-* GPIO_ANAChannel4
-* GPIO_ANAChannel5
-* GPIO_ANAChannel6
-* GPIO_ANAChannel7
-* GPIO_ANAChannelALL
-* - NewState: new state of the port pin.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None
-* Return : None
-*******************************************************************************/
-void GPIO_ANAPinConfig(u8 GPIO_ANAChannel, FunctionalState NewState)
-{
-
- if(NewState == ENABLE)
- {
- if(GPIO_ANAChannel == GPIO_ANAChannelALL)
- {
- SCU->GPIOOUT[4] = 0x0000;
- SCU->GPIOIN[4] = 0x00;
- }
- else
- {
- SCU->GPIOOUT[4] &= ~(0x3<<(GPIO_ANAChannel-1));
- SCU->GPIOIN[4] &= ~GPIO_ANAChannel;
- }
- SCU->GPIOANA |= GPIO_ANAChannel;
-
- }
- else
- {
- SCU->GPIOANA &= ~GPIO_ANAChannel;
- }
-}
-
-/*******************************************************************************
-* Function Name : GPIO_GetGPIONumber
-* Description : searche the GPIO number.
-* Input : GPIOx: where x can be (0..9) to select the GPIO peripheral.
-* Output : None
-* Return : GPIO number
-*******************************************************************************/
-u8 GPIO_GetGPIONumber(GPIO_TypeDef* GPIOx)
-{
-
- if(GPIOx == GPIO1)
- {
- return 1;
- }
- if(GPIOx == GPIO2)
- {
- return 2;
- }
- if(GPIOx == GPIO3)
- {
- return 3;
- }
- if(GPIOx == GPIO4)
- {
- return 4;
- }
- if(GPIOx == GPIO5)
- {
- return 5;
- }
- if(GPIOx == GPIO6)
- {
- return 6;
- }
- if(GPIOx == GPIO7)
- {
- return 7;
- }
- if(GPIOx == GPIO8)
- {
- return 8;
- }
- if(GPIOx == GPIO9)
- {
- return 9;
- }
- return 0;
-}
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_test_lcd/str91x_lib/91x_lib.c b/uc_str912/prj_test_lcd/str91x_lib/91x_lib.c deleted file mode 100644 index c0eadbb..0000000 --- a/uc_str912/prj_test_lcd/str91x_lib/91x_lib.c +++ /dev/null @@ -1,281 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_lib.c
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file provides all peripherals pointers
- : initialization.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
-* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-#define EXT
-
-/* Standard include ----------------------------------------------------------*/
-#include "91x_map.h"
-
-/* Include of other module interface headers ---------------------------------*/
-/* Local includes ------------------------------------------------------------*/
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Interface functions -------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-#ifdef DEBUG
-
-/*******************************************************************************
-* Function Name : debug
-* Description : this function initialize peripherals pointers
-* Input : no one
-* Output : no one
-* Return : no one
-*******************************************************************************/
-void debug(void)
-{
-
-
-/************************* DMA *************************/
-
-#ifdef _DMA
- DMA = (DMA_TypeDef *)DMA_BASE;
-#endif /* _DMA */
-
-/************************* DMA *************************/
-
-
-#ifdef _DMA_Channel0
- DMA_Channel0= (DMA_Channel_TypeDef *)DMA_Channel0_BASE;
-#endif /* _DMA_Channel0 */
-
-#ifdef _DMA_Channel1
- DMA_Channel1= (DMA_Channel_TypeDef *)DMA_Channel1_BASE;
-#endif /* _DMA_Channel1 */
-
-#ifdef _DMA_Channel2
- DMA_Channel2 = (DMA_Channel_TypeDef *)DMA_Channel2_BASE;
-#endif /* _DMA_Channel2 */
-
-#ifdef _DMA_Channel3
- DMA_Channel3 = (DMA_Channel_TypeDef *)DMA_Channel3_BASE;
-#endif /* _DMA_Channel3 */
-
-#ifdef _DMA_Channel4
- DMA_Channel4 = (DMA_Channel_TypeDef *)DMA_Channel4_BASE;
-#endif /* _DMA_Channel4 */
-
-#ifdef _DMA_Channel5
- DMA_Channel5= (DMA_Channel_TypeDef *)DMA_Channel5_BASE;
-#endif /* _DMA_Channel5*/
-
-
-#ifdef _DMA_Channel6
- DMA_Channel6 = (DMA_Channel_TypeDef *)DMA_Channel6_BASE;
-#endif /* _DMA_Channel6 */
-
-#ifdef _DMA_Channel7
- DMA_Channel7 = (DMA_Channel_TypeDef *)DMA_Channel7_BASE;
-#endif /* _DMA_Channel7 */
-
-
-
- /************************* EMI *************************/
-
-#ifdef _EMI_Bank0
- EMI_Bank0= (EMI_Bank_TypeDef *)EMI_Bank0_BASE;
-#endif /* _EMI_Bank0 */
-
-#ifdef _EMI_Bank1
- EMI_Bank1= (EMI_Bank_TypeDef *)EMI_Bank1_BASE;
-#endif /* _EMI_Bank1 */
-
-#ifdef _EMI_Bank2
- EMI_Bank2 = (EMI_Bank_TypeDef *)EMI_Bank2_BASE;
-#endif /* _EMI_Bank2 */
-
-#ifdef _EMI_Bank3
- EMI_Bank3 = (EMI_Bank_TypeDef *)EMI_Bank3_BASE;
- #endif /* _EMI_Bank3 */
-
-
-
-/************************* AHBAPB *************************/
-
-#ifdef _AHBAPB0
- AHBAPB0 = (AHBAPB_TypeDef *)AHBAPB0_BASE;
-#endif /* _AHBAPB0 */
-
-#ifdef _AHBAPB1
- AHBAPB1 = (AHBAPB_TypeDef *)AHBAPB1_BASE;
-#endif /*_AHBAPB1 */
-
-
-
-/************************* FMI *************************/
-
-#ifdef _FMI
- FMI = (FMI_TypeDef *)FMI_BASE;
-#endif /* _FMI */
-
-/************************* VIC *************************/
-
-#ifdef _VIC0
- VIC0 = (VIC_TypeDef *)VIC0_BASE;
-#endif /* _VIC0 */
-
-#ifdef _VIC1
- VIC1 = (VIC_TypeDef *)VIC1_BASE;
-#endif /* _VIC1 */
-
-/************************* WIU *************************/
-
-#ifdef _WIU
- WIU = (WIU_TypeDef *)WIU_BASE;
-#endif /* _WIU */
-
-/************************* TIM *************************/
-
-#ifdef _TIM0
- TIM0 = (TIM_TypeDef *)TIM0_BASE;
-#endif /* _TIM0 */
-
-#ifdef _TIM1
- TIM1 = (TIM_TypeDef *)TIM1_BASE;
-#endif /* _TIM1 */
-
-#ifdef _TIM2
- TIM2 = (TIM_TypeDef *)TIM2_BASE;
-#endif /* _TIM2 */
-
-#ifdef _TIM3
- TIM3 = (TIM_TypeDef *)TIM3_BASE;
-#endif /* _TIM3 */
-
-/************************* GPIO ************************/
-
-#ifdef _GPIO0
- GPIO0 = (GPIO_TypeDef *)GPIO0_BASE;
-#endif /* _GPIO0 */
-
-#ifdef _GPIO1
- GPIO1 = (GPIO_TypeDef *)GPIO1_BASE;
-#endif /* _GPIO1 */
-
-#ifdef _GPIO2
- GPIO2 = (GPIO_TypeDef *)GPIO2_BASE;
-#endif /* _GPIO2 */
-
-#ifdef _GPIO3
- GPIO3 = (GPIO_TypeDef *)GPIO3_BASE;
-#endif /* _GPIO3 */
-
-#ifdef _GPIO4
- GPIO4 = (GPIO_TypeDef *)GPIO4_BASE;
-#endif /* _GPIO4 */
-
-#ifdef _GPIO5
- GPIO5 = (GPIO_TypeDef *)GPIO5_BASE;
-#endif /* _GPIO5 */
-
-#ifdef _GPIO6
- GPIO6 = (GPIO_TypeDef *)GPIO6_BASE;
-#endif /* _GPIO6 */
-
-#ifdef _GPIO7
- GPIO7 = (GPIO_TypeDef *)GPIO7_BASE;
-#endif /* _GPIO7 */
-
-#ifdef _GPIO8
- GPIO8 = (GPIO_TypeDef *)GPIO8_BASE;
-#endif /* _GPIO8 */
-
-#ifdef _GPIO9
- GPIO9 = (GPIO_TypeDef *)GPIO9_BASE;
-#endif /* _GPIO9 */
-
-/************************* RTC *************************/
-
-#ifdef _RTC
- RTC = (RTC_TypeDef *)RTC_BASE;
-#endif /* _RTC */
-
-/************************* PRCCU ***********************/
-
-#ifdef _SCU
- SCU = (SCU_TypeDef *)SCU_BASE;
-#endif /* _PRCCU */
-
-/************************** MC *************************/
-
-#ifdef _MC
- MC = (MC_TypeDef *)MC_BASE;
-#endif /* _MC */
-
-/************************* UART ************************/
-
-#ifdef _UART0
- UART0 = (UART_TypeDef *)UART0_BASE;
-#endif /* _UART0 */
-
-#ifdef _UART1
- UART1 = (UART_TypeDef *)UART1_BASE;
-#endif /* _UART1 */
-
-#ifdef _UART2
- UART2 = (UART_TypeDef *)UART2_BASE;
-#endif /* _UART2 */
-
-/************************* SSP *************************/
-
-#ifdef _SSP0
- SSP0 = (SSP_TypeDef *)SSP0_BASE;
-#endif /* _SSP0 */
-
-#ifdef _SSP1
- SSP1 = (SSP_TypeDef *)SSP1_BASE;
-#endif /* _SSP1 */
-
-/************************* CAN *************************/
-
-#ifdef _CAN
- CAN = (CAN_TypeDef *)CAN_BASE;
-#endif /* _CAN */
-
-/************************* ADC *************************/
-
-#ifdef _ADC
- ADC = (ADC_TypeDef *)ADC_BASE;
-#endif /* _ADC */
-
-/************************* WDG *************************/
-
-#ifdef _WDG
- WDG = (WDG_TypeDef *)WDG_BASE;
-#endif /* _WDG */
-
-/************************* I2C *************************/
-
-#ifdef _I2C0
- I2C0 = (I2C_TypeDef *)I2C0_BASE;
-#endif /* _I2C0 */
-
-#ifdef _I2C1
- I2C1 = (I2C_TypeDef *)I2C1_BASE;
-#endif /* _I2C1 */
-/********************** ENET **************************/
-#ifdef _ENET
- ENET_MAC = (ENET_MAC_TypeDef *)ENET_MAC_BASE;
- ENET_DMA = (ENET_DMA_TypeDef *)ENET_DMA_BASE;
-#endif /* _ENET */
-}
-#endif /* DEBUG */
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_test_lcd/str91x_lib/91x_scu.c b/uc_str912/prj_test_lcd/str91x_lib/91x_scu.c deleted file mode 100644 index 21116b2..0000000 --- a/uc_str912/prj_test_lcd/str91x_lib/91x_scu.c +++ /dev/null @@ -1,661 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_scu.c
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file provides the SCU library software functions
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
-* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_scu.h"
-
-/* Include of other module interface headers ---------------------------------*/
-/* Local includes ------------------------------------------------------------*/
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-#define SCU_PLLEN 0x80000
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Interface functions -------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/*******************************************************************************
-* Function Name : SCU_MCLKSourceConfig
-* Description : Configures the MCLK source clock
-* Input : MCLK_Source = SCU_MCLK_OSC, SCU_MCLK_PLL or SCU_MCLK_RTC
-* Output : None
-* Return : ErrorStatus: SUCCESS or ERROR
-* Note : this function returns ERROR if trying to select the PLL as
-* clock source while the PLL is disabled or not locked.
-*******************************************************************************/
-ErrorStatus SCU_MCLKSourceConfig(u32 MCLK_Source)
-{
- u32 CLKCNTR_Value;
-
- CLKCNTR_Value = SCU->CLKCNTR; /*get CLKCNTR register value*/
- CLKCNTR_Value &=~0x3; /*clear field MCLKSEL*/
- if (MCLK_Source == SCU_MCLK_PLL) /*PLL selected as clock source*/
- {
- /*check if PLL enabled & locked*/
- if (!((SCU->PLLCONF&SCU_PLLEN)&&(SCU->SYSSTATUS&SCU_FLAG_LOCK)))
- return ERROR;
- }
- else CLKCNTR_Value |=MCLK_Source; /*OSC or RTC selected as clock source*/
- SCU->CLKCNTR = CLKCNTR_Value; /*Update CLKCNTR register value*/
- return SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : SCU_PLLFactorsConfig
-* Description : Sets the PLL factors
-* Input : PLLN, PLLM and PLLP
-* Output : None
-* Return : ErrorStatus: ERROR or SUCCESS
-* Notes : -The PLL factors must respect the PLL specification requirements
-* -The function returns ERROR if trying to change PLL
-* factors while PLL is selected as Main Clock source (MCLK)
-* -This function disables the PLL, to enable the PLL use
-* function" SCU_PLLCmd(ENABLE)" after setting the PLL factors
-******************************************************************************/
-ErrorStatus SCU_PLLFactorsConfig(u8 PLLN, u8 PLLM, u8 PLLP)
-{
- if (SCU_PLLCmd(DISABLE)==SUCCESS) /*Disable PLL*/
- {
- SCU->PLLCONF =0; /*clear PLLCONF register*/
- SCU->PLLCONF |=(PLLN<<8); /*update PLLN field*/
- SCU->PLLCONF |=PLLM; /*update PLLM field*/
- SCU->PLLCONF |=PLLP<<16; /*update PLLP field*/
- return SUCCESS;
- }
- return ERROR;
-}
-
-/*******************************************************************************
-* Function Name : SCU_PLLCmd
-* Description : Enable or Disable the PLL
-* Input : NewState = ENABLE or DISABLE
-* Output : None
-* Return : ErrorStatus: SUCCESS or ERROR
-* Note : -The function returns ERROR if:
-* *trying to disable the PLL while it is selected as the MCLK
-* *trying to enable the PLL while it is already enabled and
-* locked
-*******************************************************************************/
-ErrorStatus SCU_PLLCmd(FunctionalState NewState)
-{
- vu32 i;
- if (NewState==ENABLE)
- {
- if (!((SCU->PLLCONF&SCU_PLLEN)&&(SCU->SYSSTATUS&SCU_FLAG_LOCK)))
- {
- SCU->SYSSTATUS|=SCU_FLAG_LOCK; /*clear LOCK bit*/
- SCU->PLLCONF |=SCU_PLLEN; /*PLL Enable*/
- while(!SCU->SYSSTATUS&SCU_FLAG_LOCK); /*Wait PLL to lock*/
- return SUCCESS;
- }
- else return ERROR;
- }
- else /*NewState = DISABLE*/
- {
- if(SCU->CLKCNTR&0x3) /*check if PLL not sys CLK*/
- {
- for(i=10;i>0;i--); /*delay before PLL disabling*/
- SCU->PLLCONF &=~SCU_PLLEN; /*PLL Disable*/
- return SUCCESS;
- }
- else return ERROR;
- }
-}
-
-/*******************************************************************************
-* Function Name : SCU_RCLKDivisorConfig
-* Description : Sets the RCLK divisor value
-* Input : RCLK_Divisor
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_RCLKDivisorConfig(u32 RCLK_Divisor)
-{
- SCU->CLKCNTR &=SCU_RCLK_Div1; /*clear RCLKDIV[2:0] field*/
- if (RCLK_Divisor!=SCU_RCLK_Div1)
- SCU->CLKCNTR |= RCLK_Divisor; /*update field with RCLK divisor*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_HCLKDivisorConfig
-* Description : Sets the HCLK divisor value
-* Input : HCLK_Divisor
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_HCLKDivisorConfig(u32 HCLK_Divisor)
-{
- SCU->CLKCNTR &=SCU_HCLK_Div1; /*clear AHBDIV[1:0] field*/
- if (HCLK_Divisor!=SCU_HCLK_Div1)
- SCU->CLKCNTR |= HCLK_Divisor; /*update field with HCLK divisor*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_PCLKDivisorConfig
-* Description : Sets the PCLK divisor value
-* Input : PCLK_Divisor
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_PCLKDivisorConfig(u32 PCLK_Divisor)
-{
- SCU->CLKCNTR &=SCU_PCLK_Div1; /*clear APBDIV[1:0] field*/
- if (PCLK_Divisor!=SCU_PCLK_Div1)
- SCU->CLKCNTR |= PCLK_Divisor; /*update field with PCLK Divisor*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_APBPeriphClockConfig
-* Description : Enable the clock for an APB peripheral
-* Input : -APBPerip : APB peripherals(__RTC, __ADC ,...)
-* -NewState : ENABLE or DISABLE
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_APBPeriphClockConfig(u32 APBPeriph, FunctionalState NewState)
-{
- if (NewState==ENABLE) /*Enable clock for APB peripheral*/
- SCU->PCGR1 |=APBPeriph;
- else
- SCU->PCGR1 &=~APBPeriph; /*Disable clock for APB peripheral*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_AHBPeriphClockConfig
-* Description : Enable the clock for an AHB peripheral
-* Input : -AHBPerip: AHB peripherals(__USB, __DMA,...)
-* -NewState : ENABLE or DISABLE
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_AHBPeriphClockConfig(u32 AHBPeriph, FunctionalState NewState)
-{
- if (NewState==ENABLE) /*Enable clock for AHB peripheral*/
- SCU->PCGRO |=AHBPeriph;
- else
- SCU->PCGRO &=~AHBPeriph; /*Disable clock for AHB peripheral*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_APBPeriphReset
-* Description : Assert or deassert Reset on APB peripheral
-* Input : -APBPeriph: APB peripherals(__RTC, __ADC,...)
- -NewState : ENABLE or DISABLE
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_APBPeriphReset(u32 APBPeriph, FunctionalState NewState)
-{
- if (NewState==DISABLE) /*APB peripheral not held in Reset*/
- SCU->PRR1 |=APBPeriph;
- else
- SCU->PRR1 &=~APBPeriph; /*APB peripheral held in Reset*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_AHBPeriphReset
-* Description : Assert or deassert Reset on AHB peripheral
-* Input : -AHBPeriph: AHB peripherals(__USB, __DMA,...)
- -NewState : ENABLE or DISABLE
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_AHBPeriphReset(u32 AHBPeriph, FunctionalState NewState)
-{
- if (NewState==DISABLE)
- SCU->PRR0 |=AHBPeriph; /*AHB peripheral not held in Reset*/
- else
- SCU->PRR0 &=~AHBPeriph; /*AHB peripheral held in Reset*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_APBPeriphIdleConfig
-* Description : Enable or Disable Periph Clock during Idle mode
-* Input : -APBPeriph: APB peripherals(__RTC, __ADC,...)
- -NewState : ENABLE or DISABLE
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_APBPeriphIdleConfig(u32 APBPeriph, FunctionalState NewState)
-{
- if (NewState==ENABLE)
- SCU->MGR1 |=APBPeriph; /*APB peripheral clock enabled during Idle mode*/
- else
- SCU->MGR1 &=~APBPeriph; /*APB peripheral clock disabled during Idle mode*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_AHBPeriphIdleConfig
-* Description : Enable or Disable Periph Clock during Idle mode
-* Input : -AHBPeriph: AHB peripherals(__USB, __DMA,...)
- -NewState : ENABLE or DISABLE
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_AHBPeriphIdleConfig(u32 AHBPeriph, FunctionalState NewState)
-{
- if (NewState==ENABLE)
- SCU->MGR0 |=AHBPeriph; /*AHB peripheral clock enabled during Idle mode*/
- else
- SCU->MGR0 &=~AHBPeriph; /*AHB peripheral clock disabled during Idle mode*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_APBPeriphDebugConfig
-* Description : Enable or Disable Periph Clock during ARM debug state
-* Input : -APBPeriph: APB peripherals(__RTC, __ADC,...)
- -NewState : ENABLE or DISABLE
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_APBPeriphDebugConfig(u32 APBPeriph, FunctionalState NewState)
-{
- if (NewState==ENABLE)
- SCU->PECGR1 |=APBPeriph; /*APB peripheral clock enabled during ARM debug state*/
- else
- SCU->PECGR1 &=~APBPeriph; /*APB peripheral clock disabled during ARM debug state*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_AHBPeriphDebugConfig
-* Description : Enable or Disable Periph Clock during ARM debug state
-* Input : -AHBPeriph: AHB peripherals(__USB, __DMA,...)
- -NewState : ENABLE or DISABLE
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_AHBPeriphDebugConfig(u32 AHBPeriph, FunctionalState NewState)
-{
- if (NewState==ENABLE)
- SCU->PECGR0 |=AHBPeriph; /*AHB peripheral clock enabled during ARM debug state*/
- else
- SCU->PECGR0 &=~AHBPeriph; /*AHB peripheral clock disabled during ARM debug state*/
-}
-/*******************************************************************************
-* Function Name : SCU_BRCLKDivisorConfig
-* Description : Sets the BRCLK divisor value
-* Input : BRCLK_Divisor
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_BRCLKDivisorConfig(u32 BRCLK_Divisor)
-{
- SCU->CLKCNTR &=SCU_BRCLK_Div1; /*Clear BRSEL bit*/
- if (BRCLK_Divisor!=SCU_BRCLK_Div1)
- SCU->CLKCNTR |= SCU_BRCLK_Div2; /*set bit BRSEL*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_TIMCLKSourceConfig
-* Description : Sets the TIMx clock source
-* Input : - TIMx : SCU_TIM01 or SCU_TIM23
-* - TIMCLK_Source = SCU_TIMCLK_EXT or SCU_TIMCLK_INT
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_TIMCLKSourceConfig(u8 TIMx, u32 TIMCLK_Source)
-{
- if (TIMx== SCU_TIM01) /*TIM01 clock source configuration*/
- {
- SCU->CLKCNTR &=0xFFFFDFFF;
- if (TIMCLK_Source == SCU_TIMCLK_EXT)
- SCU->CLKCNTR |=0x2000;
- }
- else
- {
- SCU->CLKCNTR &=0xFFFFBFFF; /*TIM23 clock source configuration*/
- if (TIMCLK_Source == SCU_TIMCLK_EXT)
- SCU->CLKCNTR |=0x4000;
- }
-}
-
-/*******************************************************************************
-* Function Name : SCU_TIMPresConfig
-* Description : Sets the TIMx Prescaler Value
-* Input : - TIMx : SCU_TIM01 or SCU_TIM23
-* - Prescaler (16 bit value)
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_TIMPresConfig(u8 TIMx, u16 Prescaler)
-{
- if (TIMx==SCU_TIM01) /*TIM01 Prescaler configuration*/
- SCU->SCR1 = Prescaler&0xFFFF;
- else
- SCU->SCR2 = Prescaler&0xFFFF; /*TIM23 Prescaler configuration*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_USBCLKConfig
-* Description : Configures the clock source for the 48MHz USBCLK
-* Input : USBCLK_Source: SCU_USBCLK_MCLK,SCU_USBCLK_MCLK2 or SCU_USBCLK_EXT
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_USBCLKConfig(u32 USBCLK_Source)
-{
- SCU->CLKCNTR &=SCU_USBCLK_MCLK; /*clear USBSEL[1:0] field*/
- if (USBCLK_Source!=SCU_USBCLK_MCLK)
- SCU->CLKCNTR |= USBCLK_Source; /*update field with USBCLK_Source*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_PHYCLKConfig
-* Description : Enable or Disable PHY clock output
-* Input : NewState : ENABLE or DISABLE
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_PHYCLKConfig(FunctionalState NewState)
-{
- if (NewState==ENABLE)
- SCU->CLKCNTR |= 0x1000; /*enable MIIPHY clock*/
- else
- SCU->CLKCNTR &=~0x1000; /*disable MIIPHY clock*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_FMICLKDivisorConfig
-* Description : Set the FMI clock divisor
-* Input : FMICLK_Divisor: SCU_FMICLK_Div1 or SCU_FMICLK_DIV2
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_FMICLKDivisorConfig(u32 FMICLK_Divisor)
-{
- SCU->CLKCNTR &=SCU_FMICLK_Div1; /*FMICLK = RCLK*/
- if (FMICLK_Divisor!=SCU_FMICLK_Div1)
- SCU->CLKCNTR |=SCU_FMICLK_Div2; /*FMICLK = RCLK/2 */
-}
-
-/*******************************************************************************
-* Function Name : SCU_EMIBCLKDivisorConfig
-* Description : Set the EMI Bus clock divisor: EMIBCLK = HCLK or HCLK/2
-* Input : SCU_EMICLK: SCU_EMIBCLK_Div1 , SCU_EMIBCLK_Div2
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_EMIBCLKDivisorConfig(u32 SCU_EMIBCLK)
-{
- SCU->CLKCNTR &=SCU_EMIBCLK_Div1; /*EMIBCLK = HCLK */
- if (SCU_EMIBCLK!=SCU_EMIBCLK_Div1)
- SCU->CLKCNTR |= SCU_EMIBCLK_Div2; /*EMIBCLK = HCLK/2 */
-}
-
-/*******************************************************************************
-* Function Name : SCU_EMIModeConfig
-* Description : Configure the EMI as Multiplexed or Demultiplexed
-* Input : SCU_EMIMODE : SCU_EMI_MUX or SCU_EMI_DEMUX
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_EMIModeConfig(u32 SCU_EMIMODE)
-{
- SCU->SCR0 &=SCU_EMI_MUX; /*EMI mode = Multiplexed*/
- if (SCU_EMIMODE!=SCU_EMI_MUX)
- SCU->SCR0 |= SCU_EMI_DEMUX; /*EMI mode = Demultiplexed*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_EMIALEConfig
-* Description : Configure the ALE signal (length & polarity)
-* Input : -SCU_EMIALE_LEN : SCU_EMIALE_LEN1 or SCU_EMIALE_LEN2
-* -SCU_EMIALE_POL : SCU_EMIALE_POLLow or SCU_EMI_POLHigh
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_EMIALEConfig(u32 SCU_EMIALE_LEN, u32 SCU_EMIALE_POL)
-{
- /*Configure EMI ALE Length*/
- SCU->SCR0 &=SCU_EMIALE_LEN1;
- if (SCU_EMIALE_LEN!=SCU_EMIALE_LEN1)
- SCU->SCR0 |= SCU_EMIALE_LEN2;
-
- /*Configure EMI ALE POL*/
- SCU->SCR0 &=SCU_EMIALE_POLLow;
- if (SCU_EMIALE_POL!=SCU_EMIALE_POLLow)
- SCU->SCR0 |= SCU_EMIALE_POLHigh;
-}
-
-/*******************************************************************************
-* Function Name : SCU_ITConfig
-* Description : ENBALE or DISABLE an SCU interrupt
-* Input : -SCU_IT: interrupt mask
-* -NewState: ENABLE or DISABLE
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_ITConfig(u32 SCU_IT, FunctionalState NewState)
-{
- if (NewState==ENABLE)
- SCU->ITCMSK&=~SCU_IT; /*IT enable */
- else
- SCU->ITCMSK|=SCU_IT; /*IT disable( mask)*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_GetFlagStatus
-* Description : Returns flag status
-* Input : SCU_Flag
-* Output : NONE
-* Return : SET or RESET
-*******************************************************************************/
-FlagStatus SCU_GetFlagStatus(u32 SCU_Flag)
-{
- if (SCU->SYSSTATUS&SCU_Flag)
- return SET;
- else return RESET;
-}
-
-/*******************************************************************************
-* Function Name : SCU_ClearFlag
-* Description : Clears a SYSTATUS Flag
-* Input : SCU_Flag
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_ClearFlag(u32 SCU_Flag)
-{
- SCU->SYSSTATUS = SCU_Flag;
-}
-/*******************************************************************************
-* Function Name : SCU_GetPLLfreqValue
-* Description : Gets the current PLL frequency
-* Input : None
-* Output : None
-* Return : PLL frequency (KHz)
-*******************************************************************************/
-u32 SCU_GetPLLFreqValue(void)
-{
- u8 PLL_M;
- u8 PLL_N;
- u8 PLL_P;
-
- PLL_M = SCU->PLLCONF&0xFF;
- PLL_N = (SCU->PLLCONF&0xFF00)>>8;
- PLL_P = (SCU->PLLCONF&0x70000)>>16;
-
- if ((PLL_M>0)&&(PLL_N>0))
- return (u32)(((_Main_Crystal*2)*PLL_N)/(PLL_M<<PLL_P));
-
- else return 0;
-}
-/*******************************************************************************
-* Function Name : SCU_GetMCLKFreqValue
-* Description : Gets the current MCLK frequency
-* Input : None
-* Output : None
-* Return : MCLK frequency (KHz)
-*******************************************************************************/
-u32 SCU_GetMCLKFreqValue(void)
-{
- if ((SCU->CLKCNTR&0x3) == 0x2) return (u32)(_Main_Crystal);
- if ((SCU->CLKCNTR&0x3) == 0x1) return (u32)(32);
- else return (SCU_GetPLLFreqValue());
-}
-
-/*******************************************************************************
-* Function Name : SCU_GetRCLKFreqValue
-* Description : Gets the current RCLK frequency
-* Input : None
-* Output : None
-* Return : RCLK frequency (KHz)
-*******************************************************************************/
-u32 SCU_GetRCLKFreqValue(void)
-{
- u8 RCLK_Div;
- RCLK_Div = (SCU->CLKCNTR&0x1C)>>2;
- if (RCLK_Div==0x5) RCLK_Div=10;
- return (u32)(SCU_GetMCLKFreqValue() >>RCLK_Div);
-}
-
-/*******************************************************************************
-* Function Name : SCU_GetHCLKFreqValue
-* Description : Gets the current PCLK frequency
-* Input : None
-* Output : None
-* Return : HCLK frequency (KHz)
-*******************************************************************************/
-u32 SCU_GetHCLKFreqValue(void)
-{
- u8 HCLK_Div;
- HCLK_Div = (SCU->CLKCNTR&0x60)>>5;
- return (u32)(SCU_GetRCLKFreqValue() >>HCLK_Div);
-}
-
-/*******************************************************************************
-* Function Name : SCU_GetPCLKFreqValue
-* Description : Gets the current HCLK frequency
-* Input : None
-* Output : None
-* Return : PCLK frequency (KHz)
-*******************************************************************************/
-u32 SCU_GetPCLKFreqValue(void)
-{
- u8 PCLK_Div;
- PCLK_Div = (SCU->CLKCNTR&0x180)>>7;
- return (u32)(SCU_GetRCLKFreqValue() >>PCLK_Div);
-}
-
-/*******************************************************************************
-* Function Name : SCU_WakeUpLineConfig
-* Description : Configures an External interrupt as WakeUp line
-* Input : EXTint : 0 -> 31
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_WakeUpLineConfig(u8 EXTint)
-{
- if (EXTint < 8)
- {
- SCU->WKUPSEL&=~0x7;
- SCU->WKUPSEL|=EXTint;
- }
- else if (EXTint<16)
- {
- SCU->WKUPSEL&=~0x38;
- SCU->WKUPSEL|=(EXTint-8)<<3;
- }
- else if (EXTint<24)
- {
- SCU->WKUPSEL&=~0x1C0;
- SCU->WKUPSEL|=(EXTint-16)<<6;
- }
- else
- {
- SCU->WKUPSEL&=~0xE00;
- SCU->WKUPSEL|=(EXTint-24)<<9;
- }
-}
-
-/*******************************************************************************
-* Function Name : SCU_SpecIntRunModeConfig
-* Description : Enables or Disables the Special Run mode
-* Input : newstate = ENABLE or DISABLE
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_SpecIntRunModeConfig(FunctionalState NewState)
-{
- if (NewState == ENABLE)
- SCU->PWRMNG |=0x8;
- else
- SCU->PWRMNG &=~0x8;
-}
-/*******************************************************************************
-* Function Name : SCU_EnterIdleMode
-* Description : Enters in Idle mode
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_EnterIdleMode(void)
-{
- SCU->PWRMNG |=0x1;
-}
-/*******************************************************************************
-* Function Name : SCU_EnterSleepMode
-* Description : Enters in Sleep mode
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_EnterSleepMode(void)
-{
- SCU->PWRMNG |=0x2;
-}
-
-/*******************************************************************************
-* Function Name : SCU_UARTIrDAConfig
-* Description : Enable or Disable the Irda mode for UARTx
-* Input : - UARTx :x=0,1 or 2
-* - UART_IrDA_Mode : SCU_UARTMode_IrDA or SCU_UARTMode_UART
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_UARTIrDASelect(UART_TypeDef * UARTx, u8 UART_IrDA_Mode)
-{
- if (UART_IrDA_Mode == SCU_UARTMode_IrDA)
- {
- if (UARTx== UART0) SCU->SCR0 |=0x400;
- else if (UARTx==UART1) SCU->SCR0 |=0x800;
- else SCU->SCR0 |=0x1000;
- }
- else
- {
- if (UARTx== UART0) SCU->SCR0 &=~0x400;
- else if (UARTx==UART1) SCU->SCR0 &=~0x800;
- else SCU->SCR0 &=~0x1000;
- }
-}
-/*******************************************************************************
-* Function Name : SCU_PFQBCCmd
-* Description : Enable or Disable PFQBC
-* Input : NewState : ENABLE or DISABLE
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_PFQBCCmd(FunctionalState NewState)
-{
- if (NewState==ENABLE)
- SCU->SCR0 |=0x1;
- else SCU->SCR0 &=~0x1;
-}
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
|
