diff options
Diffstat (limited to 'uc_str912/prj_template91x')
50 files changed, 0 insertions, 15236 deletions
diff --git a/uc_str912/prj_template91x/Makefile b/uc_str912/prj_template91x/Makefile deleted file mode 100644 index 7dad7f7..0000000 --- a/uc_str912/prj_template91x/Makefile +++ /dev/null @@ -1,495 +0,0 @@ -# Hey Emacs, this is a -*- makefile -*-
-#
-# WinARM template makefile
-# by Giacomo Fazio and Antonio Nasca, Catania, Italy
-# <giacomofazio@gmail.com>
-# <antodani.nasca@hotmail.it>
-#
-# based on the WinARM template makefile written by Martin Thomas
-# Released to the Public Domain
-# Please read the make user manual!
-#
-#
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make program = Download the hex file to the device
-#
-# (TODO: make filename.s = Just compile filename.c into the assembler code only)
-#
-# To rebuild project do "make clean" then "make all".
-# Toolchain prefix (i.e arm-elf -> arm-elf-gcc.exe)
-#TCHAIN = arm-elf
-TCHAIN = arm-none-eabi
-
-#USE_THUMB_MODE = YES
-USE_THUMB_MODE = NO
-
-# MCU name and submodel
-MCU = arm966e-s
-SUBMDL = STR91x
-
-## Create ROM-Image
-RUN_MODE=ROM_RUN
-## Create RAM-Image
-#RUN_MODE=RAM_RUN
-
-## not supported in this example:
-## Exception-Vector placement only supported for "ROM_RUN"
-## (placement settings ignored when using "RAM_RUN")
-## - Exception vectors in ROM:
-#VECTOR_LOCATION=VECTORS_IN_ROM
-## - Exception vectors in RAM:
-#VECTOR_LOCATION=VECTORS_IN_RAM
-
-
-# Target file name (without extension).
-TARGET = main
-
-# List C source files here. (C dependencies are automatically generated.)
-# use file-extension c for "c-only"-files
-SRC = src/$(TARGET).c
-
-# List C source files here which must be compiled in ARM-Mode.
-# use file-extension c for "c-only"-files
-SRCARM = src/vectors.c
-# thumb is possible too for vectors.c - keep ARM, TODO: profile
-
-# List C++ source files here.
-# use file-extension cpp for C++-files (use extension .cpp)
-CPPSRC =
-
-# List C++ source files here which must be compiled in ARM-Mode.
-# use file-extension cpp for C++-files (use extension .cpp)
-#CPPSRCARM = $(TARGET).cpp
-CPPSRCARM =
-
-# List Assembler source files here.
-# Make them always end in a capital .S. Files ending in a lowercase .s
-# will not be considered source files but generated files (assembler
-# output from the compiler), and will be deleted upon "make clean"!
-# Even though the DOS/Win* filesystem matches both .s and .S the same,
-# it will preserve the spelling of the filenames, and gcc itself does
-# care about how the name is spelled on its command-line.
-ASRC =
-
-# List Assembler source files here which must be assembled in ARM-Mode..
-ASRCARM = src/vector.S src/startup.S
-
-# Path to Linker-Scripts
-LINKERSCRIPTPATH = .
-
-## Output format. (can be ihex or binary or both)
-## (binary i.e. for openocd and SAM-BA, hex i.e. for lpc21isp and uVision)
-#FORMAT = ihex
-#FORMAT = binary
-FORMAT = both
-
-# Optimization level, can be [0, 1, 2, 3, s].
-# 0 = turn off optimization. s = optimize for size.
-# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-#OPT = s
-OPT = 0
-
-## Using the Atmel AT91_lib produces warning with
-## the default warning-levels.
-## yes - disable these warnings; no - keep default settings
-#AT91LIBNOWARN = yes
-AT91LIBNOWARN = no
-
-# Debugging format.
-# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
-# AVR (extended) COFF requires stabs, plus an avr-objcopy run.
-#DEBUG = stabs
-DEBUG = dwarf-2
-
-# List any extra directories to look for include files here.
-# Each directory must be seperated by a space.
-EXTRAINCDIRS = ./include ./str91x_lib/include
-
-# List any extra directories to look for library files here.
-# Each directory must be seperated by a space.
-#EXTRA_LIBDIRS = ../arm7_efsl_0_2_4
-EXTRA_LIBDIRS = ./str91x_lib
-
-
-# Compiler flag to set the C Standard level.
-# c89 - "ANSI" C
-# gnu89 - c89 plus GCC extensions
-# c99 - ISO C99 standard (not yet fully implemented)
-# gnu99 - c99 plus GCC extensions
-CSTANDARD = -std=gnu99
-
-# Place -D or -U options for C here
-CDEFS = -D$(RUN_MODE)
-
-# Place -I options here
-CINCS =
-
-# Place -D or -U options for ASM here
-ADEFS = -D$(RUN_MODE)
-
-ifdef VECTOR_LOCATION
-CDEFS += -D$(VECTOR_LOCATION)
-ADEFS += -D$(VECTOR_LOCATION)
-endif
-
-CDEFS += -D__WinARM__ -D__WINARMSUBMDL_$(SUBMDL)__
-ADEFS += -D__WinARM__ -D__WINARMSUBMDL_$(SUBMDL)__
-
-# Compiler flags.
-
-ifeq ($(USE_THUMB_MODE),YES)
-THUMB = -mthumb
-THUMB_IW = -mthumb-interwork
-else
-THUMB =
-THUMB_IW =
-endif
-
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-#
-# Flags for C and C++ (arm-elf-gcc/arm-elf-g++)
-CFLAGS = -g$(DEBUG)
-CFLAGS += $(CDEFS) $(CINCS)
-CFLAGS += -O$(OPT)
-CFLAGS += -Wall -Wcast-align -Wimplicit
-CFLAGS += -Wpointer-arith -Wswitch
-CFLAGS += -ffunction-sections -fdata-sections
-CFLAGS += -Wredundant-decls -Wreturn-type -Wshadow -Wunused
-CFLAGS += -Wa,-adhlns=$(subst $(suffix $<),.lst,$<)
-CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-
-# flags only for C
-CONLYFLAGS += -Wnested-externs
-CONLYFLAGS += $(CSTANDARD)
-
-ifneq ($(AT91LIBNOWARN),yes)
-#AT91-lib warnings with:
-CFLAGS += -Wcast-qual
-CONLYFLAGS += -Wmissing-prototypes
-CONLYFLAGS += -Wstrict-prototypes
-CONLYFLAGS += -Wmissing-declarations
-endif
-
-# flags only for C++ (arm-elf-g++)
-# CPPFLAGS = -fno-rtti -fno-exceptions
-CPPFLAGS =
-
-# Assembler flags.
-# -Wa,...: tell GCC to pass this to the assembler.
-# -ahlns: create listing
-# -g$(DEBUG): have the assembler create line number information
-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:.S=.lst), -g$(DEBUG)
-
-
-#Additional libraries.
-
-# Extra libraries
-# Each library-name must be seperated by a space.
-# To add libxyz.a, libabc.a and libefsl.a:
-# EXTRA_LIBS = xyz abc efsl
-#EXTRA_LIBS = efsl
-EXTRA_LIBS = STR91x_lib
-
-#Support for newlibc-lpc (file: libnewlibc-lpc.a)
-#NEWLIBLPC = -lnewlib-lpc
-
-MATH_LIB = -lm
-
-# CPLUSPLUS_LIB = -lstdc++
-
-
-# Linker flags.
-# -Wl,...: tell GCC to pass this to linker.
-# -Map: create map file
-# --cref: add cross reference to map file
-LDFLAGS = -nostartfiles -Wl,-Map=$(TARGET).map,--cref,--gc-sections,--no-warn-mismatch
-LDFLAGS += -lc
-LDFLAGS += $(NEWLIBLPC) $(MATH_LIB)
-LDFLAGS += -lc -lgcc
-LDFLAGS += $(CPLUSPLUS_LIB)
-LDFLAGS += $(patsubst %,-L%,$(EXTRA_LIBDIRS))
-LDFLAGS += $(patsubst %,-l%,$(EXTRA_LIBS))
-
-# Set Linker-Script Depending On Selected Memory and Controller
-ifeq ($(RUN_MODE),RAM_RUN)
-LDFLAGS +=-T$(LINKERSCRIPTPATH)/$(SUBMDL)-RAM.ld
-else
-LDFLAGS +=-T$(LINKERSCRIPTPATH)/$(SUBMDL)-ROM.ld
-endif
-
-
-# Define directories, if needed.
-## DIRARM = c:/WinARM/
-## DIRARMBIN = $(DIRAVR)/bin/
-## DIRAVRUTILS = $(DIRAVR)/utils/bin/
-
-# Define programs and commands.
-SHELL = sh
-CC = $(TCHAIN)-gcc
-CPP = $(TCHAIN)-g++
-AR = $(TCHAIN)-ar
-OBJCOPY = $(TCHAIN)-objcopy
-OBJDUMP = $(TCHAIN)-objdump
-SIZE = $(TCHAIN)-size
-NM = $(TCHAIN)-nm
-REMOVE = rm -f
-REMOVEDIR = rm -f -r
-COPY = cp
-
-# Define Messages
-# English
-MSG_ERRORS_NONE = Errors: none
-MSG_BEGIN = "-------- begin (mode: $(RUN_MODE)) --------"
-MSG_END = -------- end --------
-MSG_SIZE_BEFORE = Size before:
-MSG_SIZE_AFTER = Size after:
-MSG_FLASH = Creating load file for Flash:
-MSG_EXTENDED_LISTING = Creating Extended Listing:
-MSG_SYMBOL_TABLE = Creating Symbol Table:
-MSG_LINKING = Linking:
-MSG_COMPILING = Compiling C:
-MSG_COMPILING_ARM = "Compiling C (ARM-only):"
-MSG_COMPILINGCPP = Compiling C++:
-MSG_COMPILINGCPP_ARM = "Compiling C++ (ARM-only):"
-MSG_ASSEMBLING = Assembling:
-MSG_ASSEMBLING_ARM = "Assembling (ARM-only):"
-MSG_CLEANING = Cleaning project:
-MSG_FORMATERROR = Can not handle output-format
-MSG_LPC21_RESETREMINDER = You may have to bring the target in bootloader-mode now.
-
-# Define all object files.
-COBJ = $(SRC:.c=.o)
-AOBJ = $(ASRC:.S=.o)
-COBJARM = $(SRCARM:.c=.o)
-AOBJARM = $(ASRCARM:.S=.o)
-CPPOBJ = $(CPPSRC:.cpp=.o)
-CPPOBJARM = $(CPPSRCARM:.cpp=.o)
-
-# Define all listing files.
-LST = $(ASRC:.S=.lst) $(ASRCARM:.S=.lst) $(SRC:.c=.lst) $(SRCARM:.c=.lst)
-LST += $(CPPSRC:.cpp=.lst) $(CPPSRCARM:.cpp=.lst)
-
-# Compiler flags to generate dependency files.
-### GENDEPFLAGS = -Wp,-M,-MP,-MT,$(*F).o,-MF,.dep/$(@F).d
-GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
-
-# Combine all necessary flags and optional flags.
-# Add target processor to flags.
-ALL_CFLAGS = -mcpu=$(MCU) -msoft-float $(THUMB_IW) -I. $(CFLAGS) $(GENDEPFLAGS)
-ALL_ASFLAGS = -mcpu=$(MCU) -msoft-float $(THUMB_IW) -I. -x assembler-with-cpp $(ASFLAGS)
-
-
-# Default target.
-all: begin gccversion sizebefore build sizeafter finished end
-
-ifeq ($(FORMAT),ihex)
-build: elf hex lss sym
-hex: $(TARGET).hex
-IMGEXT=hex
-else
-ifeq ($(FORMAT),binary)
-build: elf bin lss sym
-bin: $(TARGET).bin
-IMGEXT=bin
-else
-ifeq ($(FORMAT),both)
-build: elf hex bin lss sym
-hex: $(TARGET).hex
-bin: $(TARGET).bin
-else
-$(error "$(MSG_FORMATERROR) $(FORMAT)")
-endif
-endif
-endif
-
-elf: $(TARGET).elf
-lss: $(TARGET).lss
-sym: $(TARGET).sym
-
-# Eye candy.
-begin:
- @echo
- @echo $(MSG_BEGIN)
-
-finished:
- @echo $(MSG_ERRORS_NONE)
-
-end:
- @echo $(MSG_END)
- @echo
-
-
-# Display size of file.
-HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
-ELFSIZE = $(SIZE) -A $(TARGET).elf
-sizebefore:
- @if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi
-
-sizeafter:
- @if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
-
-
-# Display compiler version information.
-gccversion :
- @$(CC) --version
-
-# FLASH Programming with OPENOCD
-
-# specify the directory where openocd executable resides (openocd-ftd2xx.exe or openocd-pp.exe)
-# Note: you may have to adjust this if a newer version of YAGARTO has been downloaded
-OPENOCD_DIR = '/usr/local/bin/'
-
-# specify OpenOCD executable (pp is for the wiggler, ftd2xx is for the USB debugger)
-OPENOCD = $(OPENOCD_DIR)openocd
-#OPENOCD = $(OPENOCD_DIR)openocd-ftd2xx.exe
-
-# specify OpenOCD configuration file (pick the one for your device)
-#OPENOCD_CFG = /home/l3golas/openocd-configs/str91x-configs/str91x_signalyzer-flash-program.cfg
-#OPENOCD_CFG = /home/l3golas/openocd-configs/str91x-configs/str91x_jtagkey-flash-program.cfg
-#OPENOCD_CFG = /home/l3golas/openocd-configs/str91x-configs/str91x_armusbocd-flash-program.cfg
-OPENOCD_CFG = /home/l3golas/openocd-configs/str91x-configs/str91x_pp-flash-program.cfg
-
-program:
- @echo
- @echo "Flash Programming with OpenOCD..."
- $(OPENOCD) -f $(OPENOCD_CFG)
- @echo
- @echo
- @echo "Flash Programming Finished."
-
-
-# Create final output file (.hex) from ELF output file.
-%.hex: %.elf
- @echo
- @echo $(MSG_FLASH) $@
- $(OBJCOPY) -O ihex $< $@
-
-# Create final output file (.bin) from ELF output file.
-%.bin: %.elf
- @echo
- @echo $(MSG_FLASH) $@
- $(OBJCOPY) -O binary $< $@
-
-
-# Create extended listing file from ELF output file.
-# testing: option -C
-%.lss: %.elf
- @echo
- @echo $(MSG_EXTENDED_LISTING) $@
- $(OBJDUMP) -h -S -C $< > $@
-
-
-# Create a symbol table from ELF output file.
-%.sym: %.elf
- @echo
- @echo $(MSG_SYMBOL_TABLE) $@
- $(NM) -n $< > $@
-
-
-# Link: create ELF output file from object files.
-.SECONDARY : $(TARGET).elf
-.PRECIOUS : $(AOBJARM) $(AOBJ) $(COBJARM) $(COBJ) $(CPPOBJ) $(CPPOBJARM)
-%.elf: $(AOBJARM) $(AOBJ) $(COBJARM) $(COBJ) $(CPPOBJ) $(CPPOBJARM)
- @echo
- @echo $(MSG_LINKING) $@
- $(CC) $(THUMB) $(ALL_CFLAGS) $(AOBJARM) $(AOBJ) $(COBJARM) $(COBJ) $(CPPOBJ) $(CPPOBJARM) --output $@ $(LDFLAGS)
-# $(CPP) $(THUMB) $(ALL_CFLAGS) $(AOBJARM) $(AOBJ) $(COBJARM) $(COBJ) $(CPPOBJ) $(CPPOBJARM) --output $@ $(LDFLAGS)
-
-# Compile: create object files from C source files. ARM/Thumb
-$(COBJ) : %.o : %.c
- @echo
- @echo $(MSG_COMPILING) $<
- $(CC) -c $(THUMB) $(ALL_CFLAGS) $(CONLYFLAGS) $< -o $@
-
-# Compile: create object files from C source files. ARM-only
-$(COBJARM) : %.o : %.c
- @echo
- @echo $(MSG_COMPILING_ARM) $<
- $(CC) -c $(ALL_CFLAGS) $(CONLYFLAGS) $< -o $@
-
-# Compile: create object files from C++ source files. ARM/Thumb
-$(CPPOBJ) : %.o : %.cpp
- @echo
- @echo $(MSG_COMPILINGCPP) $<
- $(CPP) -c $(THUMB) $(ALL_CFLAGS) $(CPPFLAGS) $< -o $@
-
-# Compile: create object files from C++ source files. ARM-only
-$(CPPOBJARM) : %.o : %.cpp
- @echo
- @echo $(MSG_COMPILINGCPP_ARM) $<
- $(CPP) -c $(ALL_CFLAGS) $(CPPFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C source files. ARM/Thumb
-## does not work - TODO - hints welcome
-##$(COBJ) : %.s : %.c
-## $(CC) $(THUMB) -S $(ALL_CFLAGS) $< -o $@
-
-
-# Assemble: create object files from assembler source files. ARM/Thumb
-$(AOBJ) : %.o : %.S
- @echo
- @echo $(MSG_ASSEMBLING) $<
- $(CC) -c $(THUMB) $(ALL_ASFLAGS) $< -o $@
-
-
-# Assemble: create object files from assembler source files. ARM-only
-$(AOBJARM) : %.o : %.S
- @echo
- @echo $(MSG_ASSEMBLING_ARM) $<
- $(CC) -c $(ALL_ASFLAGS) $< -o $@
-
-
-# Target: clean project.
-clean: begin clean_list finished end
-
-
-clean_list :
- @echo
- @echo $(MSG_CLEANING)
- $(REMOVE) $(TARGET).hex
- $(REMOVE) $(TARGET).bin
- $(REMOVE) $(TARGET).obj
- $(REMOVE) $(TARGET).elf
- $(REMOVE) $(TARGET).map
- $(REMOVE) $(TARGET).obj
- $(REMOVE) $(TARGET).a90
- $(REMOVE) $(TARGET).sym
- $(REMOVE) $(TARGET).lnk
- $(REMOVE) $(TARGET).lss
- $(REMOVE) $(COBJ)
- $(REMOVE) $(CPPOBJ)
- $(REMOVE) $(AOBJ)
- $(REMOVE) $(COBJARM)
- $(REMOVE) $(CPPOBJARM)
- $(REMOVE) $(AOBJARM)
- $(REMOVE) $(LST)
- $(REMOVE) $(SRC:.c=.s)
- $(REMOVE) $(SRC:.c=.d)
- $(REMOVE) $(SRCARM:.c=.s)
- $(REMOVE) $(SRCARM:.c=.d)
- $(REMOVE) $(CPPSRC:.cpp=.s)
- $(REMOVE) $(CPPSRC:.cpp=.d)
- $(REMOVE) $(CPPSRCARM:.cpp=.s)
- $(REMOVE) $(CPPSRCARM:.cpp=.d)
- $(REMOVEDIR) .dep | exit 0
-
-
-# Include the dependency files.
--include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
-
-
-# Listing of phony targets.
-.PHONY : all begin finish end sizebefore sizeafter gccversion \
-build elf hex bin lss sym clean clean_list program
-
diff --git a/uc_str912/prj_template91x/STR91x-RAM.ld b/uc_str912/prj_template91x/STR91x-RAM.ld deleted file mode 100644 index aced384..0000000 --- a/uc_str912/prj_template91x/STR91x-RAM.ld +++ /dev/null @@ -1,218 +0,0 @@ -/***********************************************************************************
-* Copyright 2005 Anglia Design
-* This demo code and associated components are provided as is and has no warranty,
-* implied or otherwise. You are free to use/modify any of the provided
-* code at your own risk in your applications with the expressed limitation
-* of liability (see below)
-*
-* LIMITATION OF LIABILITY: ANGLIA OR ANGLIA DESIGNS SHALL NOT BE LIABLE FOR ANY
-* LOSS OF PROFITS, LOSS OF USE, LOSS OF DATA, INTERRUPTION OF BUSINESS, NOR FOR
-* INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND WHETHER UNDER
-* THIS AGREEMENT OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-*
-* Author : Spencer Oliver
-* Web : www.anglia-designs.com
-*
-***********************************************************************************/
-
-/* Stack Sizes */
-
- _STACKSIZE = 1024;
- _STACKSIZE_IRQ = 256;
- _STACKSIZE_FIQ = 256;
- _STACKSIZE_SVC = 0;
- _STACKSIZE_ABT = 0;
- _STACKSIZE_UND = 0;
- _HEAPSIZE = 1024;
-
-/* Memory Definitions */
-
-MEMORY
-{
- DATA (rw) : ORIGIN = 0x04000000, LENGTH = 0x00018000
-}
-
-/* Section Definitions */
-
-SECTIONS
-{
- /* first section is .text which is used for code */
-
- .text :
- {
- KEEP(*(.vectors))
- KEEP(*(.init))
- *(.text .text.*)
- *(.gnu.linkonce.t.*)
- *(.glue_7t .glue_7)
- KEEP(*(.fini))
- *(.gcc_except_table)
- } >DATA =0
- . = ALIGN(4);
-
- /* .ctors .dtors are used for c++ constructors/destructors */
-
- .ctors :
- {
- PROVIDE(__ctors_start__ = .);
- KEEP(*(SORT(.ctors.*)))
- KEEP(*(.ctors))
- PROVIDE(__ctors_end__ = .);
- } >DATA
-
- .dtors :
- {
- PROVIDE(__dtors_start__ = .);
- KEEP(*(SORT(.dtors.*)))
- KEEP(*(.dtors))
- PROVIDE(__dtors_end__ = .);
- } >DATA
-
- /* .rodata section which is used for read-only data (constants) */
-
- .rodata :
- {
- *(.rodata .rodata.*)
- *(.gnu.linkonce.r.*)
- } >DATA
- . = ALIGN(4);
-
- _etext = .;
- PROVIDE (etext = .);
-
- /* .data section which is used for initialized data */
-
- .data : AT (_etext)
- {
- *(.data .data.*)
- *(.gnu.linkonce.d.*)
- SORT(CONSTRUCTORS)
- } >DATA
- . = ALIGN(4);
-
- __data_start = .;
- _edata = .;
- PROVIDE (edata = .);
-
- /* .bss section which is used for uninitialized data */
-
- .bss :
- {
- __bss_start = .;
- __bss_start__ = .;
- *(.bss .bss.*)
- *(.gnu.linkonce.b.*)
- *(COMMON)
- . = ALIGN(4);
- } >DATA
- . = ALIGN(4);
- __bss_end__ = .;
-
- _end = .;
- PROVIDE(end = .);
-
- /* .heap section which is used for memory allocation */
-
- .heap (NOLOAD) :
- {
- __heap_start__ = .;
- *(.heap)
- . = MAX(__heap_start__ + _HEAPSIZE , .);
- } >DATA
- __heap_end__ = __heap_start__ + SIZEOF(.heap);
-
- /* .stack section - user mode stack */
-
- .stack (__heap_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_start__ = .;
- *(.stack)
- . = MAX(__stack_start__ + _STACKSIZE , .);
- } >DATA
- __stack_end__ = __stack_start__ + SIZEOF(.stack);
-
- /* .stack_irq section */
-
- .stack_irq (__stack_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_irq_start__ = .;
- *(.stack_irq)
- . = MAX(__stack_irq_start__ + _STACKSIZE_IRQ , .);
- } >DATA
- __stack_irq_end__ = __stack_irq_start__ + SIZEOF(.stack_irq);
-
- /* .stack_fiq section */
-
- .stack_fiq (__stack_irq_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_fiq_start__ = .;
- *(.stack_fiq)
- . = MAX(__stack_fiq_start__ + _STACKSIZE_FIQ , .);
- } >DATA
- __stack_fiq_end__ = __stack_fiq_start__ + SIZEOF(.stack_fiq);
-
- /* .stack_svc section */
-
- .stack_svc (__stack_fiq_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_svc_start__ = .;
- *(.stack_svc)
- . = MAX(__stack_svc_start__ + _STACKSIZE_SVC , .);
- } >DATA
- __stack_svc_end__ = __stack_svc_start__ + SIZEOF(.stack_svc);
-
- /* .stack_abt section */
-
- .stack_abt (__stack_svc_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_abt_start__ = .;
- *(.stack_abt)
- . = MAX(__stack_abt_start__ + _STACKSIZE_ABT , .);
- } >DATA
- __stack_abt_end__ = __stack_abt_start__ + SIZEOF(.stack_abt);
-
- /* .stack_und section */
-
- .stack_und (__stack_abt_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_und_start__ = .;
- *(.stack_und)
- . = MAX(__stack_und_start__ + _STACKSIZE_UND , .);
- } >DATA
- __stack_und_end__ = __stack_und_start__ + SIZEOF(.stack_und);
-
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
- .comment 0 : { *(.comment) }
- /* DWARF debug sections.
- Symbols in the DWARF debugging sections are relative to the beginning
- of the section so we begin them at 0. */
- /* DWARF 1 */
- .debug 0 : { *(.debug) }
- .line 0 : { *(.line) }
- /* GNU DWARF 1 extensions */
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
- /* DWARF 1.1 and DWARF 2 */
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
- /* DWARF 2 */
- .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_line 0 : { *(.debug_line) }
- .debug_frame 0 : { *(.debug_frame) }
- .debug_str 0 : { *(.debug_str) }
- .debug_loc 0 : { *(.debug_loc) }
- .debug_macinfo 0 : { *(.debug_macinfo) }
- /* SGI/MIPS DWARF 2 extensions */
- .debug_weaknames 0 : { *(.debug_weaknames) }
- .debug_funcnames 0 : { *(.debug_funcnames) }
- .debug_typenames 0 : { *(.debug_typenames) }
- .debug_varnames 0 : { *(.debug_varnames) }
-}
-
diff --git a/uc_str912/prj_template91x/STR91x-ROM.ld b/uc_str912/prj_template91x/STR91x-ROM.ld deleted file mode 100644 index ed2979b..0000000 --- a/uc_str912/prj_template91x/STR91x-ROM.ld +++ /dev/null @@ -1,221 +0,0 @@ -/***********************************************************************************
-* Copyright 2005 Anglia Design
-* This demo code and associated components are provided as is and has no warranty,
-* implied or otherwise. You are free to use/modify any of the provided
-* code at your own risk in your applications with the expressed limitation
-* of liability (see below)
-*
-* LIMITATION OF LIABILITY: ANGLIA OR ANGLIA DESIGNS SHALL NOT BE LIABLE FOR ANY
-* LOSS OF PROFITS, LOSS OF USE, LOSS OF DATA, INTERRUPTION OF BUSINESS, NOR FOR
-* INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND WHETHER UNDER
-* THIS AGREEMENT OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-*
-* Author : Spencer Oliver
-* Web : www.anglia-designs.com
-*
-***********************************************************************************/
-
-/* Stack Sizes */
-
- _STACKSIZE = 1024;
- _STACKSIZE_IRQ = 256;
- _STACKSIZE_FIQ = 256;
- _STACKSIZE_SVC = 0;
- _STACKSIZE_ABT = 0;
- _STACKSIZE_UND = 0;
- _HEAPSIZE = 1024;
-
-/* Memory Definitions */
-
-MEMORY
-{
- CODE (rx) : ORIGIN = 0x00000000, LENGTH = 0x00080000
- DATA (rw) : ORIGIN = 0x04000000, LENGTH = 0x00018000
-}
-
-/* Section Definitions */
-
-SECTIONS
-{
- /* first section is .text which is used for code */
-
- .text :
- {
- KEEP(*(.vectors))
- KEEP(*(.init))
- *(.text .text.*)
- *(.gnu.linkonce.t.*)
- *(.glue_7t .glue_7)
- KEEP(*(.fini))
- *(.gcc_except_table)
- } >CODE =0
- . = ALIGN(4);
-
- /* .ctors .dtors are used for c++ constructors/destructors */
-
- .ctors :
- {
- PROVIDE(__ctors_start__ = .);
- KEEP(*(SORT(.ctors.*)))
- KEEP(*(.ctors))
- PROVIDE(__ctors_end__ = .);
- } >CODE
-
- .dtors :
- {
- PROVIDE(__dtors_start__ = .);
- KEEP(*(SORT(.dtors.*)))
- KEEP(*(.dtors))
- PROVIDE(__dtors_end__ = .);
- } >CODE
-
- /* .rodata section which is used for read-only data (constants) */
-
- .rodata :
- {
- *(.rodata .rodata.*)
- *(.gnu.linkonce.r.*)
- } >CODE
- . = ALIGN(4);
-
- _etext = .;
- PROVIDE (etext = .);
-
- /* .data section which is used for initialized data */
-
- .data : AT (_etext)
- {
- __data_start = .;
- *(.data .data.*)
- *(.gnu.linkonce.d.*)
- SORT(CONSTRUCTORS)
- . = ALIGN(4);
- *(.fastrun .fastrun.*)
- } >DATA
- . = ALIGN(4);
-
- _edata = .;
- PROVIDE (edata = .);
-
- /* .bss section which is used for uninitialized data */
-
- .bss :
- {
- __bss_start = .;
- __bss_start__ = .;
- *(.bss .bss.*)
- *(.gnu.linkonce.b.*)
- *(COMMON)
- . = ALIGN(4);
- } >DATA
- . = ALIGN(4);
- __bss_end__ = .;
-
- _end = .;
- PROVIDE(end = .);
-
- /* .heap section which is used for memory allocation */
-
- .heap (NOLOAD) :
- {
- __heap_start__ = .;
- *(.heap)
- . = MAX(__heap_start__ + _HEAPSIZE , .);
- } >DATA
- __heap_end__ = __heap_start__ + SIZEOF(.heap);
-
- /* .stack section - user mode stack */
-
- .stack (__heap_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_start__ = .;
- *(.stack)
- . = MAX(__stack_start__ + _STACKSIZE , .);
- } >DATA
- __stack_end__ = __stack_start__ + SIZEOF(.stack);
-
- /* .stack_irq section */
-
- .stack_irq (__stack_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_irq_start__ = .;
- *(.stack_irq)
- . = MAX(__stack_irq_start__ + _STACKSIZE_IRQ , .);
- } >DATA
- __stack_irq_end__ = __stack_irq_start__ + SIZEOF(.stack_irq);
-
- /* .stack_fiq section */
-
- .stack_fiq (__stack_irq_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_fiq_start__ = .;
- *(.stack_fiq)
- . = MAX(__stack_fiq_start__ + _STACKSIZE_FIQ , .);
- } >DATA
- __stack_fiq_end__ = __stack_fiq_start__ + SIZEOF(.stack_fiq);
-
- /* .stack_svc section */
-
- .stack_svc (__stack_fiq_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_svc_start__ = .;
- *(.stack_svc)
- . = MAX(__stack_svc_start__ + _STACKSIZE_SVC , .);
- } >DATA
- __stack_svc_end__ = __stack_svc_start__ + SIZEOF(.stack_svc);
-
- /* .stack_abt section */
-
- .stack_abt (__stack_svc_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_abt_start__ = .;
- *(.stack_abt)
- . = MAX(__stack_abt_start__ + _STACKSIZE_ABT , .);
- } >DATA
- __stack_abt_end__ = __stack_abt_start__ + SIZEOF(.stack_abt);
-
- /* .stack_und section */
-
- .stack_und (__stack_abt_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_und_start__ = .;
- *(.stack_und)
- . = MAX(__stack_und_start__ + _STACKSIZE_UND , .);
- } >DATA
- __stack_und_end__ = __stack_und_start__ + SIZEOF(.stack_und);
-
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
- .comment 0 : { *(.comment) }
- /* DWARF debug sections.
- Symbols in the DWARF debugging sections are relative to the beginning
- of the section so we begin them at 0. */
- /* DWARF 1 */
- .debug 0 : { *(.debug) }
- .line 0 : { *(.line) }
- /* GNU DWARF 1 extensions */
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
- /* DWARF 1.1 and DWARF 2 */
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
- /* DWARF 2 */
- .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_line 0 : { *(.debug_line) }
- .debug_frame 0 : { *(.debug_frame) }
- .debug_str 0 : { *(.debug_str) }
- .debug_loc 0 : { *(.debug_loc) }
- .debug_macinfo 0 : { *(.debug_macinfo) }
- /* SGI/MIPS DWARF 2 extensions */
- .debug_weaknames 0 : { *(.debug_weaknames) }
- .debug_funcnames 0 : { *(.debug_funcnames) }
- .debug_typenames 0 : { *(.debug_typenames) }
- .debug_varnames 0 : { *(.debug_varnames) }
-}
-
diff --git a/uc_str912/prj_template91x/include/vectors.h b/uc_str912/prj_template91x/include/vectors.h deleted file mode 100644 index d48e61f..0000000 --- a/uc_str912/prj_template91x/include/vectors.h +++ /dev/null @@ -1,67 +0,0 @@ -/***********************************************************************************
-* Copyright 2005 Anglia Design
-* This demo code and associated components are provided as is and has no warranty,
-* implied or otherwise. You are free to use/modify any of the provided
-* code at your own risk in your applications with the expressed limitation
-* of liability (see below)
-*
-* LIMITATION OF LIABILITY: ANGLIA OR ANGLIA DESIGNS SHALL NOT BE LIABLE FOR ANY
-* LOSS OF PROFITS, LOSS OF USE, LOSS OF DATA, INTERRUPTION OF BUSINESS, NOR FOR
-* INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND WHETHER UNDER
-* THIS AGREEMENT OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-*
-* Author : Spencer Oliver
-* Web : www.anglia-designs.com
-*
-***********************************************************************************/
-
-#ifndef _VECTOR_H
-#define _VECTOR_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-void Undefined_Handler(void);
-void FIQ_Handler(void);
-void SWI_Handler(void);
-void Prefetch_Handler(void);
-void Abort_Handler(void);
-void WDG_IRQHandler(void);
-void SW_IRQHandler(void);
-void ARMRX_IRQHandler(void);
-void ARMTX_IRQHandler(void);
-void TIM0_IRQHandler(void);
-void TIM1_IRQHandler(void);
-void TIM2_IRQHandler(void);
-void TIM3_IRQHandler(void);
-void USBHP_IRQHandler(void);
-void USBLP_IRQHandler(void);
-void SCU_IRQHandler(void);
-void ENET_IRQHandler(void);
-void DMA_IRQHandler(void);
-void CAN_IRQHandler(void);
-void MC_IRQHandler(void);
-void ADC_IRQHandler(void);
-void UART0_IRQHandler(void);
-void UART1_IRQHandler(void);
-void UART2_IRQHandler(void);
-void I2C0_IRQHandler(void);
-void I2C1_IRQHandler(void);
-void SSP0_IRQHandler(void);
-void SSP1_IRQHandler(void);
-void LVD_IRQHandler(void);
-void RTC_IRQHandler(void);
-void WIU_IRQHandler(void);
-void EXTIT0_IRQHandler(void);
-void EXTIT1_IRQHandler(void);
-void EXTIT2_IRQHandler(void);
-void EXTIT3_IRQHandler(void);
-void USBWU_IRQHandler(void);
-void PFQBC_IRQHandler(void);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif //_VECTOR_H
diff --git a/uc_str912/prj_template91x/load_segger.gdb b/uc_str912/prj_template91x/load_segger.gdb deleted file mode 100644 index fe98dd4..0000000 --- a/uc_str912/prj_template91x/load_segger.gdb +++ /dev/null @@ -1,23 +0,0 @@ -set complaints 1 -set output-radix 16 -set input-radix 16 -set prompt (arm-gdb) - -target remote localhost:2331 - -monitor speed adaptive -monitor endian little - -monitor reset -monitor flash device = STR912FAW44 -monitor flash breakpoints = 1 -monitor flash download = 1 -monitor halt - - -pwd -load main.elf -file main.elf -step -break after_delay -continue diff --git a/uc_str912/prj_template91x/src/main.c b/uc_str912/prj_template91x/src/main.c deleted file mode 100644 index 62d3c59..0000000 --- a/uc_str912/prj_template91x/src/main.c +++ /dev/null @@ -1,43 +0,0 @@ -/******************** (C) COPYRIGHT 2005 STMicroelectronics ********************
-* File Name : main.c
-* Author : MCD Application Team
-* Date First Issued : 09/27/2005 : V1.0
-* Description : Main program body
-**********************************************************************************
-* History:
-* 09/27/2005 : V1.0
-**********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*********************************************************************************/
-
-/* Standard include ------------------------------------------------------------*/
-#include "91x_lib.h"
-
-/* Include of other module interface headers -----------------------------------*/
-/* Local includes --------------------------------------------------------------*/
-/* Private typedef -------------------------------------------------------------*/
-/* Private define --------------------------------------------------------------*/
-/* Private macro ---------------------------------------------------------------*/
-/* Private variables -----------------------------------------------------------*/
-
-
-/*---------------------------------main---------------------------------------*/
-
-void main()
-{
- #ifdef LIBDEBUG
- libdebug();
- #endif - int a=4; - int b=5; - int c; - c=a+b;
-}
-
-
-/******************* (C) COPYRIGHT 2005 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/src/startup.S b/uc_str912/prj_template91x/src/startup.S deleted file mode 100644 index cef54d8..0000000 --- a/uc_str912/prj_template91x/src/startup.S +++ /dev/null @@ -1,233 +0,0 @@ -/***********************************************************************************
-* Copyright 2005 Anglia Design
-* This demo code and associated components are provided as is and has no warranty,
-* implied or otherwise. You are free to use/modify any of the provided
-* code at your own risk in your applications with the expressed limitation
-* of liability (see below)
-*
-* LIMITATION OF LIABILITY: ANGLIA OR ANGLIA DESIGNS SHALL NOT BE LIABLE FOR ANY
-* LOSS OF PROFITS, LOSS OF USE, LOSS OF DATA, INTERRUPTION OF BUSINESS, NOR FOR
-* INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND WHETHER UNDER
-* THIS AGREEMENT OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-*
-* Author : Spencer Oliver
-* Web : www.anglia-designs.com
-*
-***********************************************************************************/
-
-/**** Startup Code (executed after Reset) ****/
-
-/* Frequency values kHz */
-/* set to suit target hardware */
-
- .equ FOSC, 25000
-
-/* Standard definitions of Mode bits and Interrupt (I & F) flags in PSRs */
-
- .equ Mode_USR, 0x10
- .equ Mode_FIQ, 0x11
- .equ Mode_IRQ, 0x12
- .equ Mode_SVC, 0x13
- .equ Mode_ABT, 0x17
- .equ Mode_UND, 0x1B
- .equ Mode_SYS, 0x1F /* available on ARM Arch 4 and later */
-
- .equ I_Bit, 0x80 /* when I bit is set, IRQ is disabled */
- .equ F_Bit, 0x40 /* when F bit is set, FIQ is disabled */
-
- .equ SRAM32, 0x00
- .equ SRAM64, 0x08
- .equ SRAM96, 0x10
-
-/* --- System memory locations */
-
- .equ SCRO_AHB_UMB, 0x5C002034 /* System configuration register 0 (unbuffered) */
-
- .equ FMI_BASE_UMB, 0x54000000 /* Flash FMI base address (unbuffered) */
- .equ BBSR_off_addr, 0x00
- .equ NBBSR_off_addr, 0x04
- .equ BBADR_off_addr, 0x0C
- .equ NBBADR_off_addr, 0x10
- .equ CR_off_addr, 0x18
-
-.ifndef LIBUFF
- .equ LIBUFF, 0
-.endif
-
-/* Startup Code must be linked first at Address at which it expects to run. */
-
- .text
- .arm
- .section .init, "ax"
-
- .global _start
- .global _Main_Crystal
-
-/* After remap this will be our reset handler */
-
-_start:
- LDR pc, =NextInst
-NextInst:
-
- NOP /* Wait for OSC stabilization */
- NOP
- NOP
- NOP
- NOP
- NOP
- NOP
- NOP
- NOP
-
-/* Enable buffered mode */
-
-.if LIBUFF
- MRC p15, 0, r0, c1, c0, 0 /* Read CP15 register 1 into r0 */
- ORR r0, r0, #0x8 /* Enable Write Buffer on AHB */
- MCR p15, 0, r0, c1, c0, 0 /* Write CP15 register 1 */
-.endif
-
-/* Remap Flash Bank 0 at address 0x0 and Bank 1 at address 0x80000, */
-/* when the bank 0 is the boot bank, then enable the Bank 1. */
-
- LDR r0, =FMI_BASE_UMB
- LDR r1, =0x4 /* configure 512KB Boot bank 0 */
- STR r1, [r0, #BBSR_off_addr]
-
- LDR r1, =0x2 /* configure 32KB Non Boot bank 1 */
- STR r1, [r0, #NBBSR_off_addr]
-
- LDR r1, =(0x00000000 >> 2) /* Boot Bank Base Address */
- STR r1, [r0, #BBADR_off_addr]
-
- LDR r1, =(0x00080000 >> 2) /* Non Boot Bank Base Address */
- STR r1, [r0, #NBBADR_off_addr]
-
- LDR r1, =0x18 /* Flash Banks 0 1 enabled */
- STR r1, [r0, #CR_off_addr]
-
-/* Enable 96K RAM */
-
- LDR r0, =SCRO_AHB_UMB
-# LDR r1, =0x0196 /* prefetch disabled, default enabled */
- LDR r1, =0x0187|SRAM96
- STR r1, [r0]
-
-/* Set bits 17-18 (Instruction/Data TCM order) of the */
-/* Core Configuration Control Register */
-
- MOV r0, #0x60000
- MCR p15, 0x1, r0, c15, c1, 0
-
-/* Setup Stack for each mode */
-
-/* Enter Abort Mode and set its Stack Pointer */
-
- MSR cpsr_c, #Mode_ABT|I_Bit|F_Bit
- LDR sp, =__stack_abt_end__
-
-/* Enter Undefined Instruction Mode and set its Stack Pointer */
-
- MSR cpsr_c, #Mode_UND|I_Bit|F_Bit
- LDR sp, =__stack_und_end__
-
-/* Enter Supervisor Mode and set its Stack Pointer */
-
- MSR cpsr_c, #Mode_SVC|I_Bit|F_Bit
- LDR sp, =__stack_svc_end__
-
-/* Enter FIQ Mode and set its Stack Pointer */
-
- MSR cpsr_c, #Mode_FIQ|I_Bit|F_Bit
- LDR sp, =__stack_fiq_end__
-
-/* Enter IRQ Mode and set its Stack Pointer */
-
- MSR cpsr_c, #Mode_IRQ|I_Bit|F_Bit
- LDR sp, =__stack_irq_end__
-
-/* Enter System/User Mode and set its Stack Pointer */
-
- MSR cpsr_c, #Mode_SYS
- LDR sp, =__stack_end__
-
-/* Setup a default Stack Limit (when compiled with "-mapcs-stack-check") */
-
- LDR sl, =__bss_end__
-
-/* Relocate .data section (Copy from ROM to RAM) */
-
- LDR r1, =_etext
- LDR r2, =__data_start
- LDR r3, =_edata
-LoopRel:
- CMP r2, r3
- LDRLO r0, [r1], #4
- STRLO r0, [r2], #4
- BLO LoopRel
-
-/* Clear .bss section (Zero init) */
-
- MOV r0, #0
- LDR r1, =__bss_start__
- LDR r2, =__bss_end__
-LoopZI:
- CMP r1, r2
- STRLO r0, [r1], #4
- BLO LoopZI
-
-/* Call C++ constructors */
-
- LDR r0, =__ctors_start__
- LDR r1, =__ctors_end__
-ctor_loop:
- CMP r0, r1
- BEQ ctor_end
- LDR r2, [r0], #4
- STMFD sp!, {r0-r1}
- BLX r2
- LDMFD sp!, {r0-r1}
- B ctor_loop
-ctor_end:
-
-/* Need to set up standard file handles */
-/* Only used under simulator, normally overide syscall.c */
-
-# BL initialise_monitor_handles
-
-/* if we use debug version of str9lib this will call the init function */
-
- BL libdebug
-libdebug:
-
-/* Enter the C code, use B instruction so as to never return */
-/* use BL main if you want to use c++ destructors below */
-
- B main
-
-/* Call destructors */
-
-# LDR r0, =__dtors_start__
-# LDR r1, =__dtors_end__
-#dtor_loop:
-# CMP r0, r1
-# BEQ dtor_end
-# LDR r2, [r0], #4
-# STMFD sp!, {r0-r1}
-# BLX r2
-# LDMFD sp!, {r0-r1}
-# B dtor_loop
-#dtor_end:
-
-/* Return from main, loop forever. */
-
-#exit_loop:
-# B exit_loop
-
-/* Fosc values, used by libstr9 */
-
-_Main_Crystal: .long FOSC
-
- .weak libdebug
-
- .end
diff --git a/uc_str912/prj_template91x/src/vector.S b/uc_str912/prj_template91x/src/vector.S deleted file mode 100644 index 7708f54..0000000 --- a/uc_str912/prj_template91x/src/vector.S +++ /dev/null @@ -1,202 +0,0 @@ -/***********************************************************************************
-* Copyright 2005 Anglia Design
-* This demo code and associated components are provided as is and has no warranty,
-* implied or otherwise. You are free to use/modify any of the provided
-* code at your own risk in your applications with the expressed limitation
-* of liability (see below)
-*
-* LIMITATION OF LIABILITY: ANGLIA OR ANGLIA DESIGNS SHALL NOT BE LIABLE FOR ANY
-* LOSS OF PROFITS, LOSS OF USE, LOSS OF DATA, INTERRUPTION OF BUSINESS, NOR FOR
-* INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND WHETHER UNDER
-* THIS AGREEMENT OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-*
-* Author : Spencer Oliver
-* Web : www.anglia-designs.com
-*
-***********************************************************************************/
-
- .equ VectorAddress, 0xFFFFF030 /* VIC Vector address register address. */
- .equ VectorAddressDaisy, 0xFC000030 /* Daisy VIC Vector address register */
-
- .equ Mode_USR, 0x10
- .equ Mode_FIQ, 0x11
- .equ Mode_IRQ, 0x12
- .equ Mode_SVC, 0x13
- .equ Mode_ABT, 0x17
- .equ Mode_UND, 0x1B
- .equ Mode_SYS, 0x1F /* available on ARM Arch 4 and later */
-
- .equ I_Bit, 0x80 /* when I bit is set, IRQ is disabled */
- .equ F_Bit, 0x40 /* when F bit is set, FIQ is disabled */
-
- .text
- .arm
- .section .vectors, "ax"
-
- .global Reset_Vec
-
-/* Note: LDR PC instructions are used here, though branch (B) instructions */
-/* could also be used, unless the ROM is at an address >32MB. */
-
-/*******************************************************************************
- Exception vectors
-*******************************************************************************/
-
-Reset_Vec: LDR pc, Reset_Addr /* Reset Handler */
-Undef_Vec: LDR pc, Undefined_Addr
-SWI_Vec: LDR pc, SWI_Addr
-PAbt_Vec: LDR pc, Prefetch_Addr
-DAbt_Vec: LDR pc, Abort_Addr
- NOP /* Reserved vector */
-IRQ_Vec: LDR pc, IRQ_Addr
-FIQ_Vec: LDR pc, FIQ_Addr
-
-/*******************************************************************************
- Exception handlers address table
-*******************************************************************************/
-
-Reset_Addr: .word _start
-Undefined_Addr: .word UndefinedHandler
-SWI_Addr: .word SWIHandler
-Prefetch_Addr: .word PrefetchHandler
-Abort_Addr: .word AbortHandler
- .word 0 /* reserved */
-IRQ_Addr: .word IRQHandler
-FIQ_Addr: .word FIQHandler
-
-/*******************************************************************************
- Exception Handlers
-*******************************************************************************/
-
-/*******************************************************************************
-* Macro Name : SaveContext
-* Description : This macro used to save the context before entering
- an exception handler.
-* Input : The range of registers to store.
-* Output : none
-*******************************************************************************/
-
-.macro SaveContext reg1 reg2
- STMFD sp!,{\reg1-\reg2,lr} /* Save The workspace plus the current return */
- /* address lr_ mode into the stack */
- MRS r1, spsr /* Save the spsr_mode into r1 */
- STMFD sp!, {r1} /* Save spsr */
-.endm
-
-/*******************************************************************************
-* Macro Name : RestoreContext
-* Description : This macro used to restore the context to return from
- an exception handler and continue the program execution.
-* Input : The range of registers to restore.
-* Output : none
-*******************************************************************************/
-
-.macro RestoreContext reg1 reg2
- LDMFD sp!, {r1} /* Restore the saved spsr_mode into r1 */
- MSR spsr_cxsf, r1 /* Restore spsr_mode */
- LDMFD sp!, {\reg1-\reg2,pc}^ /* Return to the instruction following */
- /* the exception interrupt */
-.endm
-
-/*******************************************************************************
-* Function Name : IRQHandler
-* Description : This function called when IRQ exception is entered.
-* Input : none
-* Output : none
-*******************************************************************************/
-
-IRQHandler:
- SUB lr, lr, #4 /* Update the link register */
- SaveContext r0, r12 /* Save the workspace plus the current */
- /* return address lr_irq and spsr_irq */
- LDR r0, =VectorAddress
- LDR r0, [r0] /* Read the routine address */
- LDR r1, =VectorAddressDaisy
- LDR r1, [r1]
- /* Padding between the acknowledge and re-enable of interrupts */
- /* For more details, please refer to the following URL */
- /* http://www.arm.com/support/faqip/3682.html */
- NOP
- NOP
- MSR cpsr_c, #Mode_SYS /* Switch to SYS mode and enable IRQ */
- STMFD sp!, {lr} /* Save the link register. */
- LDR lr, =ReturnAddress /* Read the return address. */
- MOV pc, r0 /* Branch to the IRQ handler. */
-ReturnAddress:
- LDMFD sp!, {lr} /* Restore the link register. */
- MSR cpsr_c, #Mode_IRQ|I_Bit|F_Bit /* Switch to IRQ mode and disable IRQ */
- LDR r0, =VectorAddress /* Write to the VectorAddress to clear the */
- STR r0, [r0] /* respective interrupt in the internal interrupt */
- LDR r1, =VectorAddressDaisy /* Write to the VectorAddressDaisy to clear the */
- STR r1, [r1] /* respective interrupt in the internal interrupt */
- RestoreContext r0, r12 /* Restore the context and return to the program execution. */
-
-/*******************************************************************************
-* Function Name : SWIHandler
-* Description : This function called when SWI instruction executed.
-* Input : none
-* Output : none
-*******************************************************************************/
-
-SWIHandler:
- SaveContext r0, r12 /* r0 holds swi number */
- MOV r1, sp /* load regs */
- BL SWI_Handler
- RestoreContext r0, r12
-
-/*******************************************************************************
-* Function Name : UndefinedHandler
-* Description : This function called when undefined instruction
- exception is entered.
-* Input : none
-* Output : none
-*******************************************************************************/
-
-UndefinedHandler:
- SaveContext r0, r12
- BL Undefined_Handler
- RestoreContext r0, r12
-
-/*******************************************************************************
-* Function Name : PrefetchAbortHandler
-* Description : This function called when Prefetch Abort
- exception is entered.
-* Input : none
-* Output : none
-*******************************************************************************/
-
-PrefetchHandler:
- SUB lr, lr, #4 /* Update the link register. */
- SaveContext r0, r12
- BL Prefetch_Handler
- RestoreContext r0, r12
-
-/*******************************************************************************
-* Function Name : DataAbortHandler
-* Description : This function is called when Data Abort
- exception is entered.
-* Input : none
-* Output : none
-*******************************************************************************/
-
-AbortHandler:
- SUB lr, lr, #8 /* Update the link register. */
- SaveContext r0, r12
- BL Abort_Handler
- RestoreContext r0, r12
-
-/*******************************************************************************
-* Function Name : FIQHandler
-* Description : This function is called when FIQ
- exception is entered.
-* Input : none
-* Output : none
-*******************************************************************************/
-
-FIQHandler:
- SUB lr, lr, #4 /* Update the link register. */
- SaveContext r0, r7
- BL FIQ_Handler
- RestoreContext r0, r7
-
- .end
diff --git a/uc_str912/prj_template91x/src/vectors.c b/uc_str912/prj_template91x/src/vectors.c deleted file mode 100644 index 4022391..0000000 --- a/uc_str912/prj_template91x/src/vectors.c +++ /dev/null @@ -1,462 +0,0 @@ -/***********************************************************************************
-* Copyright 2005 Anglia Design
-* This demo code and associated components are provided as is and has no warranty,
-* implied or otherwise. You are free to use/modify any of the provided
-* code at your own risk in your applications with the expressed limitation
-* of liability (see below)
-*
-* LIMITATION OF LIABILITY: ANGLIA OR ANGLIA DESIGNS SHALL NOT BE LIABLE FOR ANY
-* LOSS OF PROFITS, LOSS OF USE, LOSS OF DATA, INTERRUPTION OF BUSINESS, NOR FOR
-* INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND WHETHER UNDER
-* THIS AGREEMENT OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-*
-* Author : Spencer Oliver
-* Web : www.anglia-designs.com
-*
-***********************************************************************************/
-
-#include "vectors.h"
-
-/*******************************************************************************
-* Function Name : Undefined_Handler
-* Description : This function Undefined instruction exception.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void Undefined_Handler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : SWI_Handler
-* Description : This function handles SW exception.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void SWI_Handler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : Prefetch_Handler
-* Description : This function handles preftetch abort exception.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void Prefetch_Handler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : Abort_Handler
-* Description : This function handles data abort exception.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void Abort_Handler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : FIQ_Handler
-* Description : This function handles FIQ exception.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void FIQ_Handler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : WDG_IRQHandler
-* Description : This function handles the WDG interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void WDG_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : SW_IRQHandler
-* Description : This function handles the SW interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void SW_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : ARMRX_IRQHandler
-* Description : This function handles the ARMRX interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void ARMRX_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : ARMTX_IRQHandler
-* Description : This function handles the ARMTX interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void ARMTX_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : TIM0_IRQHandler
-* Description : This function handles the TIM0 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM0_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : TIM1_IRQHandler
-* Description : This function handles the TIM1 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM1_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : TIM2_IRQHandler
-* Description : This function handles the TIM2 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM2_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : TIM3_IRQHandler
-* Description : This function handles the TIM3 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM3_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : USBHP_IRQHandler
-* Description : This function handles the USBHP interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void USBHP_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : USBLP_IRQHandler
-* Description : This function handles the USBLP interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void USBLP_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : SCU_IRQHandler
-* Description : This function handles the SCU interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : ENET_IRQHandler
-* Description : This function handles the ENET interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void ENET_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : DMA_IRQHandler
-* Description : This function handles the DMA interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void DMA_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : CAN_IRQHandler
-* Description : This function handles the CAN interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void CAN_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : MC_IRQHandler
-* Description : This function handles the MC interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void MC_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : ADC_IRQHandler
-* Description : This function handles the ADC interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void ADC_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : UART0_IRQHandler
-* Description : This function handles the UART0 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void UART0_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : UART1_IRQHandler
-* Description : This function handles the UART1 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void UART1_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : UART2_IRQHandler
-* Description : This function handles the UART2 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void UART2_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : I2C0_IRQHandler
-* Description : This function handles the I2C0 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void I2C0_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : I2C1_IRQHandler
-* Description : This function handles the I2C1 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void I2C1_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : SSP0_IRQHandler
-* Description : This function handles the SSP0 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void SSP0_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : SSP1_IRQHandler
-* Description : This function handles the SSP1 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void SSP1_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : LVD_IRQHandler
-* Description : This function handles the LVD interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void LVD_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : RTC_IRQHandler
-* Description : This function handles the RTC interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void RTC_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : WIU_IRQHandler
-* Description : This function handles the WIU interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void WIU_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : EXTIT0_IRQHandler
-* Description : This function handles the EXTIT0 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void EXTIT0_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : EXTIT1_IRQHandler
-* Description : This function handles the EXTIT1 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void EXTIT1_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : EXTIT2_IRQHandler
-* Description : This function handles the EXTIT2 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void EXTIT2_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : EXTIT3_IRQHandler
-* Description : This function handles the EXTIT3 interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void EXTIT3_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : USBWU_IRQHandler
-* Description : This function handles the USBWU interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void USBWU_IRQHandler(void)
-{
- while(1);
-}
-
-/*******************************************************************************
-* Function Name : PFQBC_IRQHandler
-* Description : This function handles the PFQBC interrupt request
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void PFQBC_IRQHandler(void)
-{
- while(1);
-}
diff --git a/uc_str912/prj_template91x/str91x_lib/Makefile b/uc_str912/prj_template91x/str91x_lib/Makefile deleted file mode 100644 index e65be4d..0000000 --- a/uc_str912/prj_template91x/str91x_lib/Makefile +++ /dev/null @@ -1,38 +0,0 @@ -# efsl library Makefile for STR910 by Giacomo Fazio and Antonio Nasca
-# (based on efsl library makefile for AT91SAM7S by Martin Thomas)
-
-
-MCU = arm9e
-#THUMB = -mthumb -mthumb-interwork
-THUMB =
-
-LIBNAME = libSTR91x_lib.a
-
-COPT= -mcpu=$(MCU) $(THUMB) -gdwarf-2 -Wall -Os
-INCLUDEDIRS=-Iinclude
-CFLAGS=$(COPT) $(INCLUDEDIRS)
-# gcc4 unused code-removal:
-CFLAGS += -ffunction-sections -fdata-sections
-
-CC=arm-elf-gcc
-AR=arm-elf-ar
-OBJCOPY=arm-elf-objcopy
-
-OBJ=src/91x_adc.o src/91x_ahbapb.o src/91x_can.o src/91x_dma.o
-OBJ+=src/91x_emi.o src/91x_fmi.o src/91x_gpio.o src/91x_i2c.o src/91x_lib.o src/91x_mc.o
-OBJ+=src/91x_rtc.o src/91x_scu.o src/91x_ssp.o src/91x_tim.o
-OBJ+=src/91x_wdg.o src/91x_wiu.o src/91x_uart.o src/91x_vic.o
-
-
-all: lib
-
-libandclean: lib srcclean
-
-lib: $(OBJ)
- $(AR) rcs $(LIBNAME) $(OBJ)
-
-srcclean :
- rm -f $(OBJ)
-
-clean :
- rm -f $(OBJ) $(LIBNAME)
diff --git a/uc_str912/prj_template91x/str91x_lib/include/91x_adc.h b/uc_str912/prj_template91x/str91x_lib/include/91x_adc.h deleted file mode 100644 index 25a396d..0000000 --- a/uc_str912/prj_template91x/str91x_lib/include/91x_adc.h +++ /dev/null @@ -1,124 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_adc.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file contains all the functions prototypes for the
-* ADC software library.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
-* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-
-/* Define to prevent recursive inclusion ------------------------------------ */
-
-#ifndef __91x_ADC_H
-#define __91x_ADC_H
-
-/* Includes ------------------------------------------------------------------*/
-
-#include "91x_map.h"
-
-/* Exported types ------------------------------------------------------------*/
-
-/* ADC Init structure define */
-typedef struct
-{
- u16 ADC_WDG_High_Threshold;
- u16 ADC_WDG_Low_Threshold;
- u16 ADC_Channel_0_Mode;
- u16 ADC_Channel_1_Mode;
- u16 ADC_Channel_2_Mode;
- u16 ADC_Channel_3_Mode;
- u16 ADC_Channel_4_Mode;
- u16 ADC_Channel_5_Mode;
- u16 ADC_Channel_6_Mode;
- u16 ADC_Channel_7_Mode;
- u16 ADC_Select_Channel;
- FunctionalState ADC_Scan_Mode;
- u16 ADC_Conversion_Mode;
-}ADC_InitTypeDef;
-
-/* ADC watchdog thresholds */
-typedef enum
-{
- ADC_HighThreshold,
- ADC_LowThreshold
-}ADC_ThresholdType;
-
-/* Exported constants --------------------------------------------------------*/
-
-/* ADC channels */
-#define ADC_Channel_0 0x00 /* Channel 0 */
-#define ADC_Channel_1 0x01 /* Channel 1 */
-#define ADC_Channel_2 0x02 /* Channel 2 */
-#define ADC_Channel_3 0x03 /* Channel 3 */
-#define ADC_Channel_4 0x04 /* Channel 4 */
-#define ADC_Channel_5 0x05 /* Channel 5 */
-#define ADC_Channel_6 0x06 /* Channel 6 */
-#define ADC_Channel_7 0x07 /* Channel 7 */
-
-/* ADC modes */
-#define ADC_Continuous_Mode 0x0010 /* Continuous mode conversion */
-#define ADC_Single_Mode 0xFFEF /* Single mode conversion */
-
-/* ADC Flags */
-#define ADC_FLAG_ECV 0x002F /* End of Conversion Flag */
-#define ADC_FLAG_AWD 0x002E /* Analog WatchDog Flag */
-
-#define ADC_FLAG_OV_CH_0 0x00CF /* Overflow Flag for channel 0 */
-#define ADC_FLAG_OV_CH_1 0x00EF /* Overflow Flag for channel 1 */
-#define ADC_FLAG_OV_CH_2 0x010F /* Overflow Flag for channel 2 */
-#define ADC_FLAG_OV_CH_3 0x012F /* Overflow Flag for channel 3 */
-#define ADC_FLAG_OV_CH_4 0x014F /* Overflow Flag for channel 4 */
-#define ADC_FLAG_OV_CH_5 0x016F /* Overflow Flag for channel 5 */
-#define ADC_FLAG_OV_CH_6 0x018F /* Overflow Flag for channel 6 */
-#define ADC_FLAG_OV_CH_7 0x01AF /* Overflow Flag for channel 7 */
-
-/* ADC conversion modes */
-#define ADC_NoThreshold_Conversion 0x0003 /* Conversion w/o thresholds */
-#define ADC_LowThreshold_Conversion 0x0002 /* Low threshold conversion */
-#define ADC_HighThreshold_Conversion 0x0001 /* High threshold conversion */
-#define ADC_No_Conversion 0x0000 /* No ADC conversion */
-
-/* ADC interrupts */
-#define ADC_IT_ECV 0x0400 /* End of Conversion Interrupt */
-#define ADC_IT_AWD 0x0200 /* Analog Watchdog Interrupt */
-
-/* ADC Start/Stop conversion */
-#define ADC_Conversion_Start 0x0001 /* ADC start conversion */
-#define ADC_Conversion_Stop 0xFFFE /* ADC stop conversion */
-
-/* Module private variables --------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
-void ADC_DeInit(void);
-void ADC_Init(ADC_InitTypeDef* ADC_InitStruct);
-void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct);
-void ADC_PrescalerConfig(u8 ADC_Prescaler);
-u8 ADC_GetPrescalerValue(void);
-FlagStatus ADC_GetFlagStatus(u16 ADC_Flag);
-void ADC_ClearFlag(u16 ADC_Flag);
-u16 ADC_GetConversionValue(u16 ADC_Channel);
-FlagStatus ADC_GetAnalogWatchdogResult(u16 ADC_Channel);
-void ADC_ClearAnalogWatchdogResult(u16 ADC_Channel);
-u16 ADC_GetWatchdogThreshold(ADC_ThresholdType ADC_Threshold);
-void ADC_ITConfig(u16 ADC_IT, FunctionalState ADC_NewState);
-void ADC_StandbyModeCmd(FunctionalState ADC_NewState);
-void ADC_Cmd(FunctionalState ADC_NewState);
-void ADC_ConversionCmd(u16 ADC_Conversion);
-
-#endif /* __91x_ADC_H */
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
-
diff --git a/uc_str912/prj_template91x/str91x_lib/include/91x_ahbapb.h b/uc_str912/prj_template91x/str91x_lib/include/91x_ahbapb.h deleted file mode 100644 index 1828d48..0000000 --- a/uc_str912/prj_template91x/str91x_lib/include/91x_ahbapb.h +++ /dev/null @@ -1,60 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_ahbapb.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file contains all the functions prototypes for the
-* AHBAPB software library.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
-* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef _91x_AHBAPB_H
-#define _91x_AHBAPB_H
-
-#include "91x_map.h"
-
-#define AHBAPB_Split_Enable 0x01000000
-#define AHBAPB_Split_Disable 0xFEFFFFFF
-#define AHBAPB_Error_Enable 0x0000100
-#define AHBAPB_Error_Disable 0xFFFFEFF
-
-/*FLAG*/
-#define AHBAPB_FLAG_ERROR 0x01 /* error flag*/
-#define AHBAPB_FLAG_OUTM 0x10 /* Out of Memory flag */
-#define AHBAPB_FLAG_APBT 0x20 /* APB Time-out flag */
-#define AHBAPB_FLAG_RW 0x40 /*Access type flag*/
-
-/* Includes ------------------------------------------------------------------*/
-
-
-/* AHBAPB Init structure definition */
-typedef struct
-{
- u32 AHBAPB_SetTimeOut;
- u32 AHBAPB_Error;
- u32 AHBAPB_Split;
- u8 AHBAPB_SplitCounter;
-}AHBAPB_InitTypeDef;
-
-/* Exported constants --------------------------------------------------------*/
-void AHBAPB_DeInit(AHBAPB_TypeDef* AHBAPBx);
-void AHBAPB_Init(AHBAPB_TypeDef* AHBAPBx, AHBAPB_InitTypeDef* AHBAPB_InitStruct);
-void AHBAPB_StructInit(AHBAPB_InitTypeDef* AHBAPB_InitStruct);
-FlagStatus AHBAPB_GetFlagStatus(AHBAPB_TypeDef* AHBAPBx, u8 AHBAPB_FLAG);
-void AHBAPB_ClearFlag(AHBAPB_TypeDef* AHBAPBx, u8 AHBAPB_FLAG);
-u32 AHBAPB_GetPeriphAddrError(AHBAPB_TypeDef* AHBAPBx);
-
-
-#endif /* _91x_AHBAPB_H */
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/include/91x_can.h b/uc_str912/prj_template91x/str91x_lib/include/91x_can.h deleted file mode 100644 index b3d0653..0000000 --- a/uc_str912/prj_template91x/str91x_lib/include/91x_can.h +++ /dev/null @@ -1,165 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_can.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file contains all the functions prototypes for the
-* CAN bus software library.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __91x_CAN_H
-#define __91x_CAN_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_map.h"
-
-/* Exported types ------------------------------------------------------------*/
-
-/* CAN Init structure define */
-typedef struct
-{
- u8 CAN_ConfigParameters;
- u32 CAN_Bitrate;
-}CAN_InitTypeDef;
-
-/* Exported constants --------------------------------------------------------*/
-/* Standard bitrates available*/
-enum
-{
- CAN_BITRATE_100K,
- CAN_BITRATE_125K,
- CAN_BITRATE_250K,
- CAN_BITRATE_500K,
- CAN_BITRATE_1M
-};
-
-/* Control register*/
-#define CAN_CR_TEST 0x0080
-#define CAN_CR_CCE 0x0040
-#define CAN_CR_DAR 0x0020
-#define CAN_CR_EIE 0x0008
-#define CAN_CR_SIE 0x0004
-#define CAN_CR_IE 0x0002
-#define CAN_CR_INIT 0x0001
-
-/* Status register */
-#define CAN_SR_BOFF 0x0080
-#define CAN_SR_EWARN 0x0040
-#define CAN_SR_EPASS 0x0020
-#define CAN_SR_RXOK 0x0010
-#define CAN_SR_TXOK 0x0008
-#define CAN_SR_LEC 0x0007
-
-/* Test register*/
-#define CAN_TESTR_RX 0x0080
-#define CAN_TESTR_TX1 0x0040
-#define CAN_TESTR_TX0 0x0020
-#define CAN_TESTR_LBACK 0x0010
-#define CAN_TESTR_SILENT 0x0008
-#define CAN_TESTR_BASIC 0x0004
-
-/* IFn / Command Request register*/
-#define CAN_CRR_BUSY 0x8000
-
-/* IFn / Command Mask register*/
-#define CAN_CMR_WRRD 0x0080
-#define CAN_CMR_MASK 0x0040
-#define CAN_CMR_ARB 0x0020
-#define CAN_CMR_CONTROL 0x0010
-#define CAN_CMR_CLRINTPND 0x0008
-#define CAN_CMR_TXRQSTNEWDAT 0x0004
-#define CAN_CMR_DATAA 0x0002
-#define CAN_CMR_DATAB 0x0001
-
-/* IFn / Mask 2 register*/
-#define CAN_M2R_MXTD 0x8000
-#define CAN_M2R_MDIR 0x4000
-
-/* IFn / Arbitration 2 register*/
-#define CAN_A2R_MSGVAL 0x8000
-#define CAN_A2R_XTD 0x4000
-#define CAN_A2R_DIR 0x2000
-
-/* IFn / Message Control register*/
-#define CAN_MCR_NEWDAT 0x8000
-#define CAN_MCR_MSGLST 0x4000
-#define CAN_MCR_INTPND 0x2000
-#define CAN_MCR_UMASK 0x1000
-#define CAN_MCR_TXIE 0x0800
-#define CAN_MCR_RXIE 0x0400
-#define CAN_MCR_RMTEN 0x0200
-#define CAN_MCR_TXRQST 0x0100
-#define CAN_MCR_EOB 0x0080
-
-
-/* Wake-up modes*/
-enum
-{
- CAN_WAKEUP_ON_EXT,
- CAN_WAKEUP_ON_CAN
-};
-
-
-/* CAN message structure*/
-typedef struct
-{
- u32 IdType;
- u32 Id;
- u8 Dlc;
- u8 Data[8];
-} canmsg;
-
-/* Message ID types*/
-enum
-{
- CAN_STD_ID,
- CAN_EXT_ID
-};
-
-/* Message ID limits*/
-
-#define CAN_LAST_STD_ID ((1<<11) - 1)
-#define CAN_LAST_EXT_ID ((1L<<29) - 1)
-
-/* Exported functions ------------------------------------------------------- */
-
-void CAN_Init (CAN_InitTypeDef *CAN_InitStruct);
-void CAN_DeInit (void);
-void CAN_StructInit(CAN_InitTypeDef *CAN_InitStruct);
-void CAN_SetBitrate(u32 bitrate);
-void CAN_SetTiming(u32 tseg1, u32 tseg2, u32 sjw, u32 brp);
-ErrorStatus CAN_SetUnusedMsgObj(u32 msgobj);
-ErrorStatus CAN_SetTxMsgObj(u32 msgobj, u32 idType);
-ErrorStatus CAN_SetRxMsgObj(u32 msgobj, u32 idType, u32 idLow, u32 idHigh, bool singleOrFifoLast);
-void CAN_InvalidateAllMsgObj(void);
-ErrorStatus CAN_ReleaseMessage(u32 msgobj);
-ErrorStatus CAN_SendMessage(u32 msgobj, canmsg* pCanMsg);
-ErrorStatus CAN_ReceiveMessage(u32 msgobj, bool release, canmsg* pCanMsg);
-ErrorStatus CAN_WaitEndOfTx(void);
-ErrorStatus CAN_BasicSendMessage(canmsg* pCanMsg);
-ErrorStatus CAN_BasicReceiveMessage(canmsg* pCanMsg);
-void CAN_EnterTestMode(u8 TestMask);
-void CAN_EnterInitMode(u8 InitMask);
-void CAN_LeaveInitMode(void);
-void CAN_LeaveTestMode(void);
-void CAN_ReleaseTxMessage(u32 msgobj);
-void CAN_ReleaseRxMessage(u32 msgobj);
-u32 CAN_IsMessageWaiting(u32 msgobj);
-u32 CAN_IsTransmitRequested(u32 msgobj);
-u32 CAN_IsInterruptPending(u32 msgobj);
-u32 CAN_IsObjectValid(u32 msgobj);
-
-#endif /* __91x_CAN_H */
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/include/91x_conf.h b/uc_str912/prj_template91x/str91x_lib/include/91x_conf.h deleted file mode 100644 index a39d57e..0000000 --- a/uc_str912/prj_template91x/str91x_lib/include/91x_conf.h +++ /dev/null @@ -1,117 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_conf.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : Library configuration.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
-* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-
-#ifndef __91x_CONF_H
-#define __91x_CONF_H
-
-/* To work in buffered mode just decomment the following line */
-
-//#define LIBUFF
-
-/* Comment the line below to put the library in release mode */
-//#define LIBDEBUG
-
-#define inline static __inline
-
-/************************* AHBAPB *************************/
-#define _AHBAPB
-#define _AHBAPB0
-#define _AHBAPB1
-/************************* VIC *************************/
-#define _VIC
-#define _VIC0
-#define _VIC1
-/************************* DMA *************************/
-#define _DMA
-#define _DMA_Channel0
-#define _DMA_Channel1
-#define _DMA_Channel2
-#define _DMA_Channel3
-#define _DMA_Channel4
-#define _DMA_Channel5
-#define _DMA_Channel6
-#define _DMA_Channel7
-
-/************************* EMI *************************/
-#define _EMI
-#define _EMI_Bank0
-#define _EMI_Bank1
-#define _EMI_Bank2
-#define _EMI_Bank3
-/************************* FMI *************************/
-#define _FMI
-/************************* WIU *************************/
-#define _WIU
-/************************* TIM *************************/
-#define _TIM
-#define _TIM0
-#define _TIM1
-#define _TIM2
-#define _TIM3
-/************************* GPIO ************************/
-#define _GPIO
-#define _GPIO0
-#define _GPIO1
-#define _GPIO2
-#define _GPIO3
-#define _GPIO4
-#define _GPIO5
-#define _GPIO6
-#define _GPIO7
-#define _GPIO8
-#define _GPIO9
-/************************* RTC *************************/
-#define _RTC
-/************************* SCU *************************/
-#define _SCU
-/************************* MC **************************/
-#define _MC
-/************************* UART ************************/
-#define _UART
-#define _UART0
-#define _UART1
-#define _UART2
-/************************* SSP *************************/
-#define _SSP
-#define _SSP0
-#define _SSP1
-/************************* CAN *************************/
-#define _CAN
-/************************* ADC *************************/
-#define _ADC
-/************************* WDG *************************/
-#define _WDG
-/************************* I2C *************************/
-#define _I2C
-#define _I2C0
-#define _I2C1
-/************************ ENET *************************/
-#define _ENET
-
-/*---------------------------- _Main_Crystal frequency value (KHz)------------*/
-
-//#ifndef _Main_Crystal
-//#define _Main_Crystal 25000
-//#endif
-/*------------------------------------------------------------------------------*/
-
-
-#endif /* __91x_CONF_H */
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/include/91x_dma.h b/uc_str912/prj_template91x/str91x_lib/include/91x_dma.h deleted file mode 100644 index 6a383aa..0000000 --- a/uc_str912/prj_template91x/str91x_lib/include/91x_dma.h +++ /dev/null @@ -1,247 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : template.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : provide a short description of the source file indicating
-* its purpose.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __91x_DMA_H
-#define __91x_DMA_H
-
-/* Includes ------------------------------------------------------------------*/
-#include"91x_map.h"
-
-
-/* Exported types ------------------------------------------------------------*/
-
-typedef struct
-{
- u32 DMA_Channel_SrcAdd; /* The current source address (byte-aligned) of the data to be transferred.*/
-
- u32 DMA_Channel_DesAdd; /* The current destination address (byte-aligned) of the data to be transferred.*/
-
- u32 DMA_Channel_LLstItm; /* The word- aligned address for the next Linked List Item. */
-
- u32 DMA_Channel_DesWidth; /* Destination transfer width. */
-
- u32 DMA_Channel_SrcWidth; /* Source transfer width. */
-
- u32 DMA_Channel_DesBstSize; /* The destination burst size which indicates the number of transfers that make up a destination burst transfer request.*/
-
- u32 DMA_Channel_SrcBstSize; /* The source burst size.Indicates the number of transfers that make up a source burst */
-
- u32 DMA_Channel_TrsfSize; /* Transfer size which indicates the size of the transfer when the DMA controller is the flow controller*/
-
- u32 DMA_Channel_FlowCntrl; /* Flow control and transfer type. */
-
- u32 DMA_Channel_Src; /* Source peripheral: selects the DMA source request peripheral. */
-
- u32 DMA_Channel_Des; /* Destination peripheral:selects the DMA destination request peripheral. */
-
-} DMA_InitTypeDef;
-
-/* Exported constants --------------------------------------------------------*/
-
- /* Interrupts masks */
-
-#define DMA_ITMask_IE 0x4000 /* Interrupt error mask. */
-#define DMA_ITMask_ITC 0x8000 /* Terminal count interrupt mask.*/
-#define DMA_ITMask_ALL 0xC000 /* All DMA_Channelx interrupts enable/disable mask*/
-
- /* Sources Request (used as masks) */
-
-#define DMA_USB_RX_Mask 0x0001
-#define DMA_USB_TX_Mask 0x0002
-#define DMA_TIM0_Mask 0x0004
-#define DMA_TIM1_Mask 0x0008
-#define DMA_UART0_RX_Mask 0x0010
-#define DMA_UART0_TX_Mask 0x0020
-#define DMA_UART1_RX_Mask 0x0040
-#define DMA_UART1_TX_Mask 0x0080
-#define DMA_External_Req0_Mask 0x0100
-#define DMA_External_Req1_Mask 0x0200
-#define DMA_I2C0_Mask 0x0400
-#define DMA_I2C1_Mask 0x0800
-#define DMA_SSP0_RX_Mask 0x1000
-#define DMA_SSP0_TX_Mask 0x2000
-#define DMA_SSP1_RX_Mask 0x4000
-#define DMA_SSP1_TX_Mask 0x8000
-
-
-/* Previleged Mode and user mode */
-
-#define DMA_PrevilegedMode 0x10000000
-#define DMA_UserMode 0xEFFFFFFF
-
-
-/* Error and Terminal Count interrupts Status, after and before"raw" masking */
-#define DMA_IS 0x01
-#define DMA_TCS 0x02
-#define DMA_ES 0x03
-#define DMA_TCRS 0x04
-#define DMA_ERS 0x05
-
-
-/* interrupt clear: Terminal Count flag Clear and Error flag clear*/
-
-#define DMA_TCC 0x01
-#define DMA_EC 0x02
-
-/* channel index "0...7"*/
-
-#define Channel0 0
-#define Channel1 1
-#define Channel2 2
-#define Channel3 3
-#define Channel4 4
-#define Channel5 5
-#define Channel6 6
-#define Channel7 7
-
-
-
-/* Destination request selection: selects the DMA Destination request peripheral */
-
-#define DMA_DES_USB_RX 0x00
-#define DMA_DES_USB_TX 0x40
-#define DMA_DES_TIM1 0x80
-#define DMA_DES_TIM2 0xC0
-#define DMA_DES_UART0_RX 0x100
-#define DMA_DES_UART0_TX 0x140
-#define DMA_DES_UART1_RX 0x180
-#define DMA_DES_UART1_TX 0x1C0
-#define DMA_DES_External_Req0 0x200
-#define DMA_DES_External_Req1 0x240
-#define DMA_DES_I2C0 0x280
-#define DMA_DES_I2C1 0x2C0
-#define DMA_DES_SSP0_RX 0x300
-#define DMA_DES_SSP0_TX 0x340
-#define DMA_DES_SSP1_RX 0x380
-#define DMA_DES_SSP1_TX 0x3C0
-
-
-
-
-/* Source request selection: selects the DMA Source request peripheral */
-
-#define DMA_SRC_USB_RX 0x00
-#define DMA_SRC_USB_TX 0x02
-#define DMA_SRC_TIM1 0x04
-#define DMA_SRC_TIM2 0x06
-#define DMA_SRC_UART0_RX 0x08
-#define DMA_SRC_UART0_TX 0x0A
-#define DMA_SRC_UART1_RX 0x0C
-#define DMA_SRC_UART1_TX 0x0E
-#define DMA_SRC_External_Req0 0x10
-#define DMA_SRC_External_Req1 0x12
-#define DMA_SRC_I2C0 0x14
-#define DMA_SRC_I2C1 0x16
-#define DMA_SRC_SSP0_RX 0x18
-#define DMA_SRC_SSP0_TX 0x1A
-#define DMA_SRC_SSP1_RX 0x1C
-#define DMA_SRC_SSP1_TX 0x1E
-
-
-
-
-
-#define DMA_FlowCntrlt0_DMA 0x00000000 /* transfer type :Memory-to-memory, flow controller:DMA */
-#define DMA_FlowCntrl1_DMA 0x00000800 /* transfer type :Memory-to-peripheral, flow controller:DMA */
-#define DMA_FlowCntrl2_DMA 0x00001000 /* transfer type :Peripheral-to-memory, flow controller:DMA */
-#define DMA_FlowCntrl3_DMA 0x00001800 /* transfer type :Source peripheral-to-destination peripheral, flow controller:DMA */
-#define DMA_FlowCntrl_DestPerip 0x00002000 /* transfer type :Source peripheral-to-destination peripheral, flow controller:Destination peripheral */
-#define DMA_FlowCntrl_Perip1 0x00002800 /* transfer type :Memory-to-peripheral, flow controller:peripheral */
-#define DMA_FlowCntrl_Perip2 0x00003000 /* transfer type : Peripheral-to-memory, flow controller:peripheral */
-#define DMA_FlowCntrl_SrcPerip 0x00003800 /* transfer type :Source peripheral-to-destination peripheral, flow controller:Source peripheral */
-
-
-
-
-#define DMA_SrcBst_1Data 0x00000000 /* Source Burst transfer request IS 1 Data ( DATA = Source transfer width ) */
-#define DMA_SrcBst_4Data 0x00001000 /* Source Burst transfer request IS 4 Data */
-#define DMA_SrcBst_8Data 0x00002000 /* Source Burst transfer request IS 8 Data */
-#define DMA_SrcBst_16Data 0x00003000 /* Source Burst transfer request IS 16 Data */
-#define DMA_SrcBst_32Data 0x00004000 /* Source Burst transfer request IS 32 Data */
-#define DMA_SrcBst_64Data 0x00005000 /* Source Burst transfer request IS 64Data */
-#define DMA_SrcBst_128Data 0x00006000 /* Source Burst transfer request IS 128 Data */
-#define DMA_SrcBst_256Data 0x00007000 /* Source Burst transfer request IS 256 Data */
-
-
-
-
-#define DMA_DesBst_1Data 0x00000000 /*Destination Burst transfer request IS 1Data ( DATA = destination transfer width ) */
-#define DMA_DesBst_4Data 0x00008000 /*Destination Burst transfer request IS 1 Data */
-#define DMA_DesBst_8Data 0x00010000 /*Destination Burst transfer request IS 4 Data */
-#define DMA_DesBst_16Data 0x00018000 /*Destination Burst transfer request IS 8 Data */
-#define DMA_DesBst_32Data 0x00020000 /*Destination Burst transfer request IS 16 Data */
-#define DMA_DesBst_64Data 0x00028000 /*Destination Burst transfer request IS 32 Data */
-#define DMA_DesBst_128Data 0x00030000 /*Destination Burst transfer request IS 128 Data */
-#define DMA_DesBst_256Data 0x00038000 /*Destination Burst transfer request IS 256 Data */
-
-
-
-
-
-#define DMA_SrcWidth_Byte 0x00000000 /* source Width is one Byte */
-#define DMA_SrcWidth_HalfWord 0x00040000 /* source Width is one HalfWord */
-#define DMA_SrcWidth_Word 0x00080000 /* source Width is one Word */
-
-
-
-
-#define DMA_DesWidth_Byte 0x00000000 /* Destination Width is one Byte */
-#define DMA_DesWidth_HalfWord 0x00200000 /* Destination Width is one HalfWord */
-#define DMA_DesWidth_Word 0x00400000 /* Destination Width is one Word */
-
-
-
-
-
-
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
-void DMA_DeInit(void);
-void DMA_Init(DMA_Channel_TypeDef * DMA_Channelx, DMA_InitTypeDef * DMA_InitStruct);
-void DMA_StructInit(DMA_InitTypeDef *DMA_InitStruct);
-void DMA_Cmd(FunctionalState NewState);
-void DMA_ITMaskConfig(DMA_Channel_TypeDef * DMA_Channelx, u16 DMA_ITMask, FunctionalState NewState);
-void DMA_ITConfig(DMA_Channel_TypeDef * DMA_Channelx, FunctionalState NewState);
-FlagStatus DMA_GetChannelStatus(u8 ChannelIndx );
-ITStatus DMA_GetITStatus(u8 ChannelIndx,u8 DMA_ITReq);
-void DMA_ClearIT(u8 ChannelIndx,u8 DMA_ITClr);
-void DMA_SyncConfig(u16 DMA_SrcReq, FunctionalState NewState);
-FlagStatus DMA_GetSReq(u16 DMA_SrcReq);
-FlagStatus DMA_GetLSReq(u16 DMA_SrcReq);
-FlagStatus DMA_GetBReq(u16 DMA_SrcReq);
-FlagStatus DMA_GetLBReq(u16 DMA_SrcReq);
-FlagStatus DMA_GetChannelActiveStatus( DMA_Channel_TypeDef * DMA_Channelx);
-void DMA_SetSReq(u16 DMA_SrcReq);
-void DMA_SetLSReq(u16 DMA_SrcReq);
-void DMA_SetBReq(u16 DMA_SrcReq);
-void DMA_SetLBReq(u16 DMA_SrcReq);
-void DMA_ChannelCmd (DMA_Channel_TypeDef * DMA_Channelx,FunctionalState NewState);
-void DMA_ChannelHalt (DMA_Channel_TypeDef * DMA_Channelx,FunctionalState NewState);
-void DMA_ChannelBuffering (DMA_Channel_TypeDef * DMA_Channelx,FunctionalState NewState);
-void DMA_ChannelLockTrsf(DMA_Channel_TypeDef * DMA_Channelx,FunctionalState NewState);
-void DMA_ChannelCache(DMA_Channel_TypeDef * DMA_Channelx,FunctionalState NewState);
-void DMA_ChannelProt0Mode(DMA_Channel_TypeDef * DMA_Channelx,u32 Prot0Mode);
-void DMA_ChannelSRCIncConfig (DMA_Channel_TypeDef * DMA_Channelx, FunctionalState NewState);
-void DMA_ChannelDESIncConfig (DMA_Channel_TypeDef * DMA_Channelx, FunctionalState NewState);
-
-#endif /* __91x_DMA_H */
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/include/91x_emi.h b/uc_str912/prj_template91x/str91x_lib/include/91x_emi.h deleted file mode 100644 index 4633020..0000000 --- a/uc_str912/prj_template91x/str91x_lib/include/91x_emi.h +++ /dev/null @@ -1,83 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_emi.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file contains all the functions prototypes for the
-* EMI software library.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __91x_EMI_H
-#define __91x_EMI_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_map.h"
-
-/* Exported types ------------------------------------------------------------*/
- typedef struct
- {
- u32 EMI_Bank_IDCY;
-
- u32 EMI_Bank_WSTRD;
-
- u32 EMI_Bank_WSTWR;
-
- u32 EMI_Bank_WSTROEN;
-
- u32 EMI_Bank_WSTWEN;
-
- u32 EMI_Bank_MemWidth ;
-
- u32 EMI_Bank_WriteProtection;
-
- u32 EMI_PageModeRead_TransferLength;
-
- u32 EMI_PageModeRead_Selection;
-
- } EMI_InitTypeDef;
-
-/* Exported constants --------------------------------------------------------*/
-
-
-/* page transfer length for page mode read */
-#define EMI_4Data 0x00000000 /*4 transfers burst*/
-#define EMI_8Data 0x00000400 /*8 transfers burst*/
-
-
-/*Select or deselect the page mode read*/
-#define EMI_NormalMode 0x00000000 /*Normal Mode*/
-#define EMI_PageModeRead 0x00000100 /*Page Mode Read*/
-
-
-/*memory width*/
-#define EMI_Width_Byte 0x00000000 /*8 bits width*/
-#define EMI_Width_HalfWord 0x00000010 /*16 bits width*/
-
-/*Write protection feature */
-#define EMI_Bank_NonWriteProtect 0x00000000 /*No write protection*/
-#define EMI_Bank_WriteProtect 0x00000008 /*bank is write protected*/
-
-
-/* Exported macro ------------------------------------------------------------*/
-
-
-/* Exported functions ------------------------------------------------------- */
-
-void EMI_DeInit(void);
-void EMI_Init( EMI_Bank_TypeDef* EMI_Bankx, EMI_InitTypeDef* EMI_InitStruct);
-void EMI_StructInit(EMI_InitTypeDef* EMI_InitStruct);
-
-#endif /* __EMI_H */
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/include/91x_fmi.h b/uc_str912/prj_template91x/str91x_lib/include/91x_fmi.h deleted file mode 100644 index 06e8115..0000000 --- a/uc_str912/prj_template91x/str91x_lib/include/91x_fmi.h +++ /dev/null @@ -1,184 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_fmi.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file contains all the functions prototypes for the
-* FMI software library.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
-* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-
-/* Define to prevent recursive inclusion ------------------------------------ */
-
-#ifndef __91x_FMI_H
-#define __91x_FMI_H
-
-/* ========================================================================== */
-/* When bank 1 is remapped at address 0x0, decomment the following line */
-/* ========================================================================== */
-
-//#define Remap_Bank_1
-
-
-/* Includes ------------------------------------------------------------------*/
-
-#include "91x_map.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* FMI banks */
-
-#ifdef Remap_Bank_1
-
-#define FMI_BANK_0 ((*(vu32*)0x54000010) << 2) /* FMI Bank 0 */
-#define FMI_BANK_1 ((*(vu32*)0x5400000C) << 2) /* FMI Bank 1 */
-
-#else /* Remap Bank 0 */
-
-#define FMI_BANK_0 ((*(vu32*)0x5400000C) << 2) /* FMI Bank 0 */
-#define FMI_BANK_1 ((*(vu32*)0x54000010) << 2) /* FMI Bank 1 */
-
-#endif
-
-/* FMI sectors */
-
-#define FMI_B0S0 0x00000000 + FMI_BANK_0 /* Bank 0 sector 0 */
-#define FMI_B0S1 0x00010000 + FMI_BANK_0 /* Bank 0 sector 1 */
-#define FMI_B0S2 0x00020000 + FMI_BANK_0 /* Bank 0 sector 2 */
-#define FMI_B0S3 0x00030000 + FMI_BANK_0 /* Bank 0 sector 3 */
-#define FMI_B0S4 0x00040000 + FMI_BANK_0 /* Bank 0 sector 4 */
-#define FMI_B0S5 0x00050000 + FMI_BANK_0 /* Bank 0 sector 5 */
-#define FMI_B0S6 0x00060000 + FMI_BANK_0 /* Bank 0 sector 6 */
-#define FMI_B0S7 0x00070000 + FMI_BANK_0 /* Bank 0 sector 7 */
-
-#define FMI_B1S0 0x00000000 + FMI_BANK_1 /* Bank 1 sector 0 */
-#define FMI_B1S1 0x00002000 + FMI_BANK_1 /* Bank 1 sector 1 */
-#define FMI_B1S2 0x00004000 + FMI_BANK_1 /* Bank 1 sector 2 */
-#define FMI_B1S3 0x00006000 + FMI_BANK_1 /* Bank 1 sector 3 */
-
-/* FMI Flags */
-
-#define FMI_FLAG_SPS 0x02 /* Sector Protection Status Flag */
-#define FMI_FLAG_PSS 0x04 /* Program Suspend Status Flag */
-#define FMI_FLAG_PS 0x10 /* Program Status Flag */
-#define FMI_FLAG_ES 0x20 /* Erase Status Flag */
-#define FMI_FLAG_ESS 0x40 /* Erase Suspend Status Flag */
-#define FMI_FLAG_PECS 0x80 /* FPEC Status Flag */
-
-/* FMI read wait states */
-
-#define FMI_READ_WAIT_STATE_1 0x0000 /* One read wait state */
-#define FMI_READ_WAIT_STATE_2 0x2000 /* Two read wait states */
-#define FMI_READ_WAIT_STATE_3 0x4000 /* Three read wait states */
-
-/* FMI write wait states */
-
-#define FMI_WRITE_WAIT_STATE_0 0xFFFFFEFF /* Zero wait state */
-#define FMI_WRITE_WAIT_STATE_1 0x00000100 /* One wait state */
-
-/* FMI power down configuration */
-
-#define FMI_PWD_ENABLE 0x1000 /* FMI Power Down Enable */
-#define FMI_PWD_DISABLE 0x0000 /* FMI Power Down Disable */
-
-/* FMI low voltage detector */
-
-#define FMI_LVD_ENABLE 0x0000 /* FMI Low Voltage Detector Enable */
-#define FMI_LVD_DISABLE 0x0800 /* FMI Low Voltage Detector Disable */
-
-/* FMI frequency range */
-
-#define FMI_FREQ_LOW 0x0000 /* FMI Low bus working frequency */
-#define FMI_FREQ_HIGH 0x0040 /* FMI High bus working gfrequency */
- /* Above 66 MHz*/
-/* FMI OTP word addresses */
-
-#define FMI_OTP_WORD_0 0x00 /* OTP word 0 */
-#define FMI_OTP_WORD_1 0x04 /* OTP word 1 */
-#define FMI_OTP_WORD_2 0x08 /* OTP word 2 */
-#define FMI_OTP_WORD_3 0x0C /* OTP word 3 */
-#define FMI_OTP_WORD_4 0x10 /* OTP word 4 */
-#define FMI_OTP_WORD_5 0x14 /* OTP word 5 */
-#define FMI_OTP_WORD_6 0x18 /* OTP word 6 */
-#define FMI_OTP_WORD_7 0x1C /* OTP word 7 */
-
-/* FMI OTP halfword addresses */
-
-#define FMI_OTP_LOW_HALFWORD_0 0x00 /* OTP Low halfword 0 */
-#define FMI_OTP_HIGH_HALFWORD_0 0x02 /* OTP High halfword 0 */
-#define FMI_OTP_LOW_HALFWORD_1 0x04 /* OTP Low halfword 1 */
-#define FMI_OTP_HIGH_HALFWORD_1 0x06 /* OTP High halfword 1 */
-#define FMI_OTP_LOW_HALFWORD_2 0x08 /* OTP Low halfword 2 */
-#define FMI_OTP_HIGH_HALFWORD_2 0x0A /* OTP High halfword 2 */
-#define FMI_OTP_LOW_HALFWORD_3 0x0C /* OTP Low halfword 3 */
-#define FMI_OTP_HIGH_HALFWORD_3 0x0E /* OTP High halfword 3 */
-#define FMI_OTP_LOW_HALFWORD_4 0x10 /* OTP Low halfword 4 */
-#define FMI_OTP_HIGH_HALFWORD_4 0x12 /* OTP High halfword 4 */
-#define FMI_OTP_LOW_HALFWORD_5 0x14 /* OTP Low halfword 5 */
-#define FMI_OTP_HIGH_HALFWORD_5 0x16 /* OTP High halfword 5 */
-#define FMI_OTP_LOW_HALFWORD_6 0x18 /* OTP Low halfword 6 */
-#define FMI_OTP_HIGH_HALFWORD_6 0x1A /* OTP High halfword 6 */
-#define FMI_OTP_LOW_HALFWORD_7 0x1C /* OTP Low halfword 7 */
-#define FMI_OTP_HIGH_HALFWORD_7 0x1E /* OTP High halfword 7 */
-
-/* FMI sectors Masks */
-
-#define FMI_B0S0_MASK 0x0001 /* FMI B0S0 mask */
-#define FMI_B0S1_MASK 0x0002 /* FMI B0S1 mask */
-#define FMI_B0S2_MASK 0x0004 /* FMI B0S2 mask */
-#define FMI_B0S3_MASK 0x0008 /* FMI B0S3 mask */
-#define FMI_B0S4_MASK 0x0010 /* FMI B0S4 mask */
-#define FMI_B0S5_MASK 0x0020 /* FMI B0S5 mask */
-#define FMI_B0S6_MASK 0x0040 /* FMI B0S6 mask */
-#define FMI_B0S7_MASK 0x0080 /* FMI B0S7 mask */
-
-#define FMI_B1S0_MASK 0x0100 /* FMI B1S0 mask */
-#define FMI_B1S1_MASK 0x0200 /* FMI B1S1 mask */
-#define FMI_B1S2_MASK 0x0400 /* FMI B1S2 mask */
-#define FMI_B1S3_MASK 0x0800 /* FMI B1S3 mask */
-
-/* Timeout error */
-
-#define FMI_TIME_OUT_ERROR 0x00 /* Timeout error */
-#define FMI_NO_TIME_OUT_ERROR 0x01 /* No Timeout error */
-
-/* Module private variables --------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
-void FMI_BankRemapConfig(u8 FMI_BootBankSize, u8 FMI_NonBootBankSize, \
- u32 FMI_BootBankAddress, u32 FMI_NonBootBankAddress);
-void FMI_Config(u16 FMI_ReadWaitState, u32 FMI_WriteWaitState, u16 FMI_PWD,\
- u16 FMI_LVDEN, u16 FMI_FreqRange);
-void FMI_EraseSector(vu32 FMI_Sector);
-void FMI_EraseBank(vu32 FMI_Bank);
-void FMI_WriteHalfWord(u32 FMI_Address, u16 FMI_Data);
-void FMI_WriteOTPHalfWord(u8 FMI_OTPHWAddress, u16 FMI_OTPData);
-u32 FMI_ReadWord(u32 FMI_Address);
-u32 FMI_ReadOTPData(u8 FMI_OTPAddress);
-FlagStatus FMI_GetFlagStatus(u8 FMI_Flag, vu32 FMI_Bank);
-u16 FMI_GetReadWaitStateValue(void);
-u16 FMI_GetWriteWaitStateValue(void);
-void FMI_SuspendEnable(vu32 FMI_Bank);
-void FMI_ResumeEnable(vu32 FMI_Bank);
-void FMI_ClearFlag(vu32 FMI_Bank);
-void FMI_WriteProtectionCmd(vu32 FMI_Sector, FunctionalState FMI_NewState);
-FlagStatus FMI_GetWriteProtectionStatus(u32 FMI_Sector_Protection);
-u8 FMI_WaitForLastOperation(vu32 FMI_Bank);
-
-#endif /* __91x_FMI_H */
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
-
diff --git a/uc_str912/prj_template91x/str91x_lib/include/91x_gpio.h b/uc_str912/prj_template91x/str91x_lib/include/91x_gpio.h deleted file mode 100644 index f4e5658..0000000 --- a/uc_str912/prj_template91x/str91x_lib/include/91x_gpio.h +++ /dev/null @@ -1,93 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_gpio.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file contains all the functions prototypes for the
-* GPIO software library.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
-* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion ------------------------------------ */
-
-#ifndef _91x_GPIO_H
-#define _91x_GPIO_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_map.h"
-
-/* GPIO Init structure definition */
-typedef struct
-{
- u8 GPIO_Pin;
- u8 GPIO_Direction;
- u8 GPIO_Type;
- u8 GPIO_IPConnected;
- u16 GPIO_Alternate;
-}GPIO_InitTypeDef;
-
-/* Bit_SET and Bit_RESET enumeration */
-typedef enum
-{ Bit_RESET = 0,
- Bit_SET
-}BitAction;
-
-
-/* Exported constants --------------------------------------------------------*/
-#define GPIO_Pin_None 0x00
-#define GPIO_Pin_0 0x01
-#define GPIO_Pin_1 0x02
-#define GPIO_Pin_2 0x04
-#define GPIO_Pin_3 0x08
-#define GPIO_Pin_4 0x10
-#define GPIO_Pin_5 0x20
-#define GPIO_Pin_6 0x40
-#define GPIO_Pin_7 0x80
-#define GPIO_Pin_All 0xFF
-
-#define GPIO_PinInput 0x00
-#define GPIO_PinOutput 0x01
-
-#define GPIO_Type_PushPull 0x00
-#define GPIO_Type_OpenCollector 0x01
-
-#define GPIO_IPConnected_Disable 0x00
-#define GPIO_IPConnected_Enable 0x01
-
-#define GPIO_InputAlt1 0x00
-#define GPIO_OutputAlt1 0x01
-#define GPIO_OutputAlt2 0x02
-#define GPIO_OutputAlt3 0x03
-
-#define GPIO_ANAChannel0 0x01
-#define GPIO_ANAChannel1 0x02
-#define GPIO_ANAChannel2 0x04
-#define GPIO_ANAChannel3 0x08
-#define GPIO_ANAChannel4 0x10
-#define GPIO_ANAChannel5 0x20
-#define GPIO_ANAChannel6 0x40
-#define GPIO_ANAChannel7 0x80
-#define GPIO_ANAChannelALL 0xFF
-
-void GPIO_DeInit(GPIO_TypeDef* GPIOx);
-void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct);
-void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct);
-u8 GPIO_ReadBit(GPIO_TypeDef* GPIOx, u8 GPIO_Pin);
-u8 GPIO_Read(GPIO_TypeDef* GPIOx);
-void GPIO_WriteBit(GPIO_TypeDef* GPIOx, u8 GPIO_Pin, BitAction BitVal);
-void GPIO_Write(GPIO_TypeDef* GPIOx, u8 PortVal);
-void GPIO_EMIConfig(FunctionalState NewState);
-void GPIO_ANAPinConfig(u8 GPIO_ANAChannel, FunctionalState NewState);
-
-#endif /* _91x_GPIO_H */
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/include/91x_i2c.h b/uc_str912/prj_template91x/str91x_lib/include/91x_i2c.h deleted file mode 100644 index f4d0c66..0000000 --- a/uc_str912/prj_template91x/str91x_lib/include/91x_i2c.h +++ /dev/null @@ -1,112 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_i2c.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file contains all the functions prototypes for the
-* I2C software library.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion ------------------------------------ */
-#ifndef __91x_I2C_H
-#define __91x_I2C_H
-
-/* Includes ----------------------------------------------------------------- */
-#include "91x_map.h"
-
-/* Exported types ----------------------------------------------------------- */
-/* I2C Init structure definition */
-typedef struct
-{
- u32 I2C_CLKSpeed;
- u16 I2C_OwnAddress;
- u8 I2C_GeneralCall;
- u8 I2C_Ack;
-}I2C_InitTypeDef;
-
-/* Exported constants --------------------------------------------------------*/
-#define I2C_GeneralCall_Enable 0x10
-#define I2C_GeneralCall_Disable 0xEF
-/* Acknowledgement */
-#define I2C_Ack_Enable 0x04
-#define I2C_Ack_Disable 0xFB
-
-/* I2C Flags */
-#define I2C_FLAG_SB 0x0001
-#define I2C_FLAG_M_SL 0x0002
-#define I2C_FLAG_ADSL 0x0004
-#define I2C_FLAG_BTF 0x0008
-#define I2C_FLAG_BUSY 0x0010
-#define I2C_FLAG_TRA 0x0020
-#define I2C_FLAG_ADD10 0x0040
-#define I2C_FLAG_EVF 0x0080
-#define I2C_FLAG_GCAL 0x0100
-#define I2C_FLAG_BERR 0x0200
-#define I2C_FLAG_ARLO 0x0400
-#define I2C_FLAG_STOPF 0x0800
-#define I2C_FLAG_AF 0x1000
-#define I2C_FLAG_ENDAD 0x2000
-#define I2C_FLAG_ACK 0x4000
-
-/* I2C Events */
-#define I2C_EVENT_SLAVE_ADDRESS_MATCHED ( I2C_FLAG_EVF | I2C_FLAG_BUSY | I2C_FLAG_ADSL)
-#define I2C_EVENT_SLAVE_BYTE_RECEIVED ( I2C_FLAG_EVF | I2C_FLAG_BUSY | I2C_FLAG_BTF )
-#define I2C_EVENT_SLAVE_BYTE_TRANSMITTED ( I2C_FLAG_EVF | I2C_FLAG_BUSY | I2C_FLAG_BTF | I2C_FLAG_TRA )
-#define I2C_EVENT_MASTER_MODE_SELECT ( I2C_FLAG_EVF | I2C_FLAG_BUSY | I2C_FLAG_M_SL | I2C_FLAG_SB )
-#define I2C_EVENT_MASTER_MODE_SELECTED ( I2C_FLAG_EVF | I2C_FLAG_BUSY | I2C_FLAG_M_SL | I2C_FLAG_ENDAD )
-#define I2C_EVENT_MASTER_BYTE_RECEIVED ( I2C_FLAG_EVF | I2C_FLAG_BUSY | I2C_FLAG_M_SL | I2C_FLAG_BTF )
-#define I2C_EVENT_MASTER_BYTE_TRANSMITTED ( I2C_FLAG_EVF | I2C_FLAG_BUSY | I2C_FLAG_M_SL | I2C_FLAG_BTF | I2C_FLAG_TRA )
-#define I2C_EVENT_MASTER_MODE_ADDRESS10 ( I2C_FLAG_EVF | I2C_FLAG_BUSY | I2C_FLAG_M_SL |I2C_FLAG_ADD10 )
-#define I2C_EVENT_SLAVE_STOP_DETECTED I2C_FLAG_STOPF
-#define I2C_EVENT_SLAVE_ACK_FAILURE ( I2C_FLAG_EVF | I2C_FLAG_BUSY | I2C_FLAG_BTF | I2C_FLAG_TRA | I2C_FLAG_AF)
-
-#define I2C_BUS_ERROR_DETECTED I2C_FLAG_BERR
-#define I2C_ARBITRATION_LOST I2C_FLAG_ARLO
-#define I2C_SLAVE_GENERAL_CALL (I2C_FLAG_BUSY | I2C_FLAG_GCAL)
-
-/* Master/Receiver Mode */
-#define I2C_MODE_TRANSMITTER 0x00
-#define I2C_MODE_RECEIVER 0x01
-
-/* I2C Registers offset */
-#define I2C_CR 0x00
-#define I2C_SR1 0x04
-#define I2C_SR2 0x08
-#define I2C_CCR 0x0C
-#define I2C_OAR1 0x10
-#define I2C_OAR2 0x14
-#define I2C_DR 0x18
-#define I2C_ECCR 0x1C
-
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-void I2C_DeInit(I2C_TypeDef* I2Cx);
-void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct);
-void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct);
-void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
-void I2C_GenerateStart(I2C_TypeDef* I2Cx, FunctionalState NewState);
-void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState);
-void I2C_AcknowledgeConfig(I2C_TypeDef *I2Cx, FunctionalState NewState);
-void I2C_ITConfig(I2C_TypeDef *I2Cx, FunctionalState NewState);
-void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, u8 Address, u8 Direction);
-u8 I2C_ReadRegister(I2C_TypeDef* I2Cx, u8 I2C_Register);
-FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, u16 I2C_FLAG);
-void I2C_ClearFlag(I2C_TypeDef* I2Cx, u16 I2C_FLAG, ...);
-void I2C_SendData(I2C_TypeDef* I2Cx, u8 bData);
-u8 I2C_ReceiveData(I2C_TypeDef* I2Cx);
-u16 I2C_GetLastEvent(I2C_TypeDef* I2Cx);
-ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx,u16 I2C_Event);
-
-#endif /* __91x_I2C_H */
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/include/91x_it.h b/uc_str912/prj_template91x/str91x_lib/include/91x_it.h deleted file mode 100644 index a8e35fc..0000000 --- a/uc_str912/prj_template91x/str91x_lib/include/91x_it.h +++ /dev/null @@ -1,73 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_it.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file contains the headers of the interrupt
-* handlers'routines
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
-* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion ------------------------------------ */
-#ifndef _91x_IT_H
-#define _91x_IT_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_lib.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Module private variables --------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-void Undefined_Handler (void);
-void SWI_Handler (void);
-void Prefetch_Handler (void);
-void Abort_Handler (void);
-void FIQ_Handler (void);
-void WDG_IRQHandler (void);
-void SW_IRQHandler (void);
-void ARMRX_IRQHandler (void);
-void ARMTX_IRQHandler (void);
-void TIM0_IRQHandler (void);
-void TIM1_IRQHandler (void);
-void TIM2_IRQHandler (void);
-void TIM3_IRQHandler (void);
-void USBHP_IRQHandler (void);
-void USBLP_IRQHandler (void);
-void SCU_IRQHandler (void);
-void ENET_IRQHandler (void);
-void DMA_IRQHandler (void);
-void CAN_IRQHandler (void);
-void MC_IRQHandler (void);
-void ADC_IRQHandler (void);
-void UART0_IRQHandler (void);
-void UART1_IRQHandler (void);
-void UART2_IRQHandler (void);
-void I2C0_IRQHandler (void);
-void I2C1_IRQHandler (void);
-void SSP0_IRQHandler (void);
-void SSP1_IRQHandler (void);
-void LVD_IRQHandler (void);
-void RTC_IRQHandler (void);
-void WIU_IRQHandler (void);
-void EXTIT0_IRQHandler (void);
-void EXTIT1_IRQHandler (void);
-void EXTIT2_IRQHandler (void);
-void EXTIT3_IRQHandler (void);
-void USBWU_IRQHandler (void);
-void PFQBC_IRQHandler (void);
-
-#endif /* _91x_IT_H */
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/include/91x_lib.h b/uc_str912/prj_template91x/str91x_lib/include/91x_lib.h deleted file mode 100644 index 3df7ced..0000000 --- a/uc_str912/prj_template91x/str91x_lib/include/91x_lib.h +++ /dev/null @@ -1,113 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_lib.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : Used to include the peripherals header file in the
-* user application.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
-* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-#ifndef __91x_LIB_H
-#define __91x_LIB_H
-
-#include "91x_map.h"
-#include "91x_conf.h"
-
-#ifdef _AHBAPB
- #include "91x_ahbapb.h"
-#endif /* _AHBAPB */
-
-#ifdef _EMI
- #include "91x_emi.h"
-#endif /* _EMI */
-
-#ifdef _DMA
- #include "91x_dma.h"
-#endif /* _DMA */
-
-#ifdef _FMI
- #include "91x_fmi.h"
-#endif /* _FMI */
-
-#ifdef _VIC
- #include "91x_vic.h"
-#endif /* _VIC */
-
-#ifdef _WIU
- #include "91x_wiu.h"
-#endif /* _WIU */
-
-#ifdef _TIM
- #include "91x_tim.h"
-#endif /* _TIM */
-
-#ifdef _GPIO
- #include "91x_gpio.h"
-#endif /* _GPIO */
-
-#ifdef _RTC
- #include "91x_rtc.h"
-#endif /* _RTC */
-
-#ifdef _SCU
- #include "91x_scu.h"
-#endif /* _SCU */
-
-#ifdef _UART
- #include "91x_uart.h"
-#endif /* _UART */
-
-#ifdef _SSP
- #include "91x_ssp.h"
-#endif /* _SSP */
-
-#ifdef _CAN
- #include "91x_can.h"
-#endif /* _CAN */
-
-#ifdef _ADC
- #include "91x_adc.h"
-#endif /* _ADC */
-
-#ifdef _WDG
- #include "91x_wdg.h"
-#endif /* _WDG */
-
-#ifdef _I2C
- #include "91x_i2c.h"
-#endif /* _I2C */
-
-#ifdef _WIU
- #include "91x_wiu.h"
-#endif
-
-#ifdef _MC
- #include "91x_mc.h"
-#endif
-
-#ifdef _ENET
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Module private variables --------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
- void libdebug( void );
-
-
-#endif /* __91x_LIB_H */
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/include/91x_map.h b/uc_str912/prj_template91x/str91x_lib/include/91x_map.h deleted file mode 100644 index 5fe67cf..0000000 --- a/uc_str912/prj_template91x/str91x_lib/include/91x_map.h +++ /dev/null @@ -1,878 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_map.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : Peripherals registers definition and memory mapping.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
-* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion ------------------------------------ */
-#ifndef __91x_MAP_H
-#define __91x_MAP_H
-
-#ifndef EXT
- #define EXT extern
-#endif /* EXT */
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_conf.h"
-#include "91x_type.h"
-
-/******************************************************************************/
-/* IP registers structures */
-/******************************************************************************/
-
-/*------------------------------------ FMI -----------------------------------*/
-
-typedef struct
-{
- vu32 BBSR; /* Boot Bank Size Register */
- vu32 NBBSR; /* Non-Boot Bank Size Register */
- vu32 EMPTY1;
- vu32 BBADR; /* Boot Bank Base Address Register */
- vu32 NBBADR; /* Non-Boot Bank Base Address Register */
- vu32 EMPTY2;
- vu32 CR; /* Control Register */
- vu32 SR; /* Status Register */
- vu32 BCE5ADDR; /* BC Fifth Entry Target Address Register */
-} FMI_TypeDef;
-
-/*---------------------- Analog to Digital Convertor ------------------------*/
-
-typedef struct
-{
- vu16 CR; /* Control Register */
- vu16 EMPTY1;
- vu16 CCR; /* Channel Configuration Register */
- vu16 EMPTY2;
- vu16 HTR; /* Higher Threshold Register */
- vu16 EMPTY3;
- vu16 LTR; /* Lower Threshold Register */
- vu16 EMPTY4;
- vu16 CRR; /* Compare Result Register */
- vu16 EMPTY5;
- vu16 DR0; /* Data Register for Channel 0 */
- vu16 EMPTY6;
- vu16 DR1; /* Data Register for Channel 1 */
- vu16 EMPTY7;
- vu16 DR2; /* Data Register for Channel 2 */
- vu16 EMPTY8;
- vu16 DR3; /* Data Register for Channel 3 */
- vu16 EMPTY9;
- vu16 DR4; /* Data Register for Channel 4 */
- vu16 EMPTY10;
- vu16 DR5; /* Data Register for Channel 5 */
- vu16 EMPTY11;
- vu16 DR6; /* Data Register for Channel 6 */
- vu16 EMPTY12;
- vu16 DR7; /* Data Register for Channel 7 */
- vu16 EMPTY13;
- vu16 PRS; /* Prescaler Value Register */
- vu16 EMPTY14;
-} ADC_TypeDef;
-
-/*--------------------- AHB APB BRIDGE registers strcture --------------------*/
-
-typedef struct
-{
- vu32 BSR; /* Bridge Status Register */
- vu32 BCR; /* Bridge Configuration Register */
- vu32 PAER; /* Peripheral Address Error register */
-} AHBAPB_TypeDef;
-
-/*--------------- Controller Area Network Interface Register -----------------*/
-
-typedef struct
-{
- vu16 CRR; /* IFn Command request Register */
- vu16 EMPTY1;
- vu16 CMR; /* IFn Command Mask Register */
- vu16 EMPTY2;
- vu16 M1R; /* IFn Message Mask 1 Register */
- vu16 EMPTY3;
- vu16 M2R; /* IFn Message Mask 2 Register */
- vu16 EMPTY4;
- vu16 A1R; /* IFn Message Arbitration 1 Register */
- vu16 EMPTY5;
- vu16 A2R; /* IFn Message Arbitration 2 Register */
- vu16 EMPTY6;
- vu16 MCR; /* IFn Message Control Register */
- vu16 EMPTY7;
- vu16 DA1R; /* IFn DATA A 1 Register */
- vu16 EMPTY8;
- vu16 DA2R; /* IFn DATA A 2 Register */
- vu16 EMPTY9;
- vu16 DB1R; /* IFn DATA B 1 Register */
- vu16 EMPTY10;
- vu16 DB2R; /* IFn DATA B 2 Register */
- vu16 EMPTY11[27];
-} CAN_MsgObj_TypeDef;
-
-typedef struct
-{
- vu16 CR; /* Control Register */
- vu16 EMPTY1;
- vu16 SR; /* Status Register */
- vu16 EMPTY2;
- vu16 ERR; /* Error counter Register */
- vu16 EMPTY3;
- vu16 BTR; /* Bit Timing Register */
- vu16 EMPTY4;
- vu16 IDR; /* Interrupt Identifier Register */
- vu16 EMPTY5;
- vu16 TESTR; /* Test Register */
- vu16 EMPTY6;
- vu16 BRPR; /* BRP Extension Register */
- vu16 EMPTY7[3];
- CAN_MsgObj_TypeDef sMsgObj[2];
- vu16 EMPTY8[16];
- vu16 TXR1R; /* Transmission request 1 Register */
- vu16 EMPTY9;
- vu16 TXR2R; /* Transmission Request 2 Register */
- vu16 EMPTY10[13];
- vu16 ND1R; /* New Data 1 Register */
- vu16 EMPTY11;
- vu16 ND2R; /* New Data 2 Register */
- vu16 EMPTY12[13];
- vu16 IP1R; /* Interrupt Pending 1 Register */
- vu16 EMPTY13;
- vu16 IP2R; /* Interrupt Pending 2 Register */
- vu16 EMPTY14[13];
- vu16 MV1R; /* Message Valid 1 Register */
- vu16 EMPTY15;
- vu16 MV2R; /* Message VAlid 2 Register */
- vu16 EMPTY16;
-} CAN_TypeDef;
-
-/*----------------------- System Control Unit---------------------------------*/
-
-typedef struct
-{
- vu32 CLKCNTR; /* Clock Control Register */
- vu32 PLLCONF; /* PLL Configuration Register */
- vu32 SYSSTATUS; /* System Status Register */
- vu32 PWRMNG; /* Power Management Register */
- vu32 ITCMSK; /* Interrupt Mask Register */
- vu32 PCGRO; /* Peripheral Clock Gating Register 0 */
- vu32 PCGR1; /* Peripheral Clock Gating Register 1 */
- vu32 PRR0; /* Peripheral Reset Register 0 */
- vu32 PRR1; /* Peripheral Reset Register 1 */
- vu32 MGR0; /* Idle Mode Mask Gating Register 0 */
- vu32 MGR1; /* Idle Mode Mask Gating Register 1 */
- vu32 PECGR0; /* Peripheral Emulation Clock Gating Register 0 */
- vu32 PECGR1; /* Peripheral Emulation Clock Gating Register 1 */
- vu32 SCR0; /* System Configuration Register 0 */
- vu32 SCR1; /* System Configuration Register 1 */
- vu32 SCR2; /* System Configuration Register 2 */
- u32 EMPTY1;
- vu32 GPIOOUT[8]; /* GPIO Output Registers */
- vu32 GPIOIN[8]; /* GPIO Input Registers */
- vu32 GPIOTYPE[10]; /* GPIO Type Registers */
- vu32 GPIOEMI; /* GPIO EMI Selector Register */
- vu32 WKUPSEL; /* Wake-Up Selection Register */
- u32 EMPTY2[2];
- vu32 GPIOANA; /* GPIO Analag mode Register */
-} SCU_TypeDef;
-
-/*------------------------- DMA Channelx Registers ---------------------------*/
-
-typedef struct
-{
- vu32 SRC; /* Channelx Source Address Register */
- vu32 DES; /* Channelx Destination Address Register */
- vu32 LLI; /* Channelx Lincked List Item Register */
- vu32 CC; /* Channelx Contol Register */
- vu32 CCNF; /* Channelx Configuration Register */
-} DMA_Channel_TypeDef;
-
-/* x can be ,0,1,2,3,4,5,6 or 7. There are eight Channels AHB BUS Master */
-
-/*----------------------------- DMA Controller -------------------------------*/
-
-typedef struct
-{
- vu32 ISR; /* Interrupt Status Register */
- vu32 TCISR; /* Terminal Count Interrupt Status Register */
- vu32 TCICR; /* Terminal CountInterrupt Clear Register */
- vu32 EISR; /* Error Interrupt Status Register */
- vu32 EICR; /* Error Interrupt Clear Register */
- vu32 TCRISR; /* Terminal Count Raw Interrupt Status Register */
- vu32 ERISR; /* Raw Error Interrupt Status Register */
- vu32 ENCSR; /* Enabled Channel Status Register */
- vu32 SBRR; /* Software Burst Request Register */
- vu32 SSRR; /* Software Single Request Register */
- vu32 SLBRR; /* Software Last Burst Request Register */
- vu32 SLSRR; /* Software Last Single Request Register */
- vu32 CNFR; /* Configuration Register */
- vu32 SYNR; /* Syncronization Register */
-} DMA_TypeDef;
-
-/*--------------------------------- TIM Timer --------------------------------*/
-
-typedef struct
-{
- vu16 IC1R; /* Input Capture 1 Register */
- vu16 EMPTY1;
- vu16 IC2R; /* Input Capture 2 Register */
- vu16 EMPTY2;
- vu16 OC1R; /* Output Compare 1 Register */
- vu16 EMPTY3;
- vu16 OC2R; /* Output Compare 2 Register */
- vu16 EMPTY4;
- vu16 CNTR; /* Counter Register */
- vu16 EMPTY5;
- vu16 CR1; /* Control Register 1 */
- vu16 EMPTY6;
- vu16 CR2; /* Control Register 2 */
- vu16 EMPTY7;
- vu16 SR; /* Status Register */
- vu16 EMPTY8;
-} TIM_TypeDef;
-
-/*---------------------------- EMI Bankx Registers ---------------------------*/
-
-typedef struct
-{
- vu32 ICR; /* Bankx Idle Cycle Control Register */
- vu32 RCR; /* Bankx Read Wait State Control Register */
- vu32 WCR; /* Bankx Write Wait State Control Register */
- vu32 OECR; /* Bankx Output Enable Assertion Delay Control Register */
- vu32 WECR; /* Bankx Write Enable Assertion Delay Control Register */
- vu32 BCR; /* Bankx Control Register */
- } EMI_Bank_TypeDef;
-
-/*---------------------------- Ethernet Controller ---------------------------*/
-
-/* MAC Registers */
-typedef struct
-{
- vu32 MCR; /* ENET Control Register */
- vu32 MAH; /* ENET Address High Register */
- vu32 MAL; /* ENET Address Low Register */
- vu32 MCHA; /* Multicast Address High Register */
- vu32 MCLA; /* Multicast Address Low Register */
- vu32 MIIA; /* MII Address Register */
- vu32 MIID; /* MII Data Register */
- vu32 MCF; /* ENET Control Frame Register */
- vu32 VL1; /* VLAN1 Register */
- vu32 VL2; /* VLAN2 register */
- vu32 MTS; /* ENET Transmission Status Register */
- vu32 MRS; /* ENET Reception Status Register */
-} ENET_MAC_TypeDef;
-
-/* DMA Registers */
-typedef struct
-{
- vu32 SCR; /* DMA Status and Control Register */
- vu32 IER; /* DMA Interrupt Sources Enable Register */
- vu32 ISR; /* DMA Interrupt Status Register */
- vu32 CCR; /* Clock Control Relation : HCLK, PCLK and
- ENET_CLK phase relations */
- vu32 RXSTR; /* Rx DMA start Register */
- vu32 RXCR; /* Rx DMA Control Register */
- vu32 RXSAR; /* Rx DMA Base Address Register */
- vu32 RXNDAR; /* Rx DMA Next Descriptor Address Register */
- vu32 RXCAR; /* Rx DMA Current Address Register */
- vu32 RXCTCR; /* Rx DMA Current Transfer Count Register */
- vu32 RXTOR; /* Rx DMA FIFO Time Out Register */
- vu32 RXSR; /* Rx DMA FIFO Status Register */
- vu32 TXSTR; /* Tx DMA start Register */
- vu32 TXCR; /* Tx DMA Control Register */
- vu32 TXSAR; /* Tx DMA Base Address Register */
- vu32 TXNDAR; /* Tx DMA Next Descriptor Address Register */
- vu32 TXCAR; /* Tx DMA Current Address Register */
- vu32 TXTCR; /* Tx DMA Current Transfer Count Register */
- vu32 TXTOR; /* Tx DMA FIFO Time Out Register */
- vu32 TXSR; /* Tx DMA FIFO Status Register */
-} ENET_DMA_TypeDef;
-
-/*------------------------------------- GPIO ---------------------------------*/
-
-typedef struct
-{
- vu8 DR[1021]; /* Data Register */
- vu32 DDR; /* Data Direction Register */
-} GPIO_TypeDef;
-
-/*-------------------------------- I2C interface -----------------------------*/
-
-typedef struct
-{
- vu8 CR; /* Control Register */
- vu8 EMPTY1[3];
- vu8 SR1; /* Status Register 1 */
- vu8 EMPTY2[3];
- vu8 SR2; /* Status Register 2 */
- vu8 EMPTY3[3];
- vu8 CCR; /* Clock Control Register */
- vu8 EMPTY4[3];
- vu8 OAR1; /* Own Address Register 1 */
- vu8 EMPTY5[3];
- vu8 OAR2; /* Own Address Register 2 */
- vu8 EMPTY6[3];
- vu8 DR; /* Data Register */
- vu8 EMPTY7[3];
- vu8 ECCR; /* Extended Clock Control Register */
- vu8 EMPTY8[3];
-} I2C_TypeDef;
-
-/*------------------------------------- VIC ----------------------------------*/
-
-typedef struct
-{
- vu32 ISR; /* IRQ Status Register */
- vu32 FSR; /* FIQ Status Register */
- vu32 RINTSR; /* Raw Interrupt Status Register */
- vu32 INTSR; /* Interrupt Select Register */
- vu32 INTER; /* Interrupt Enable Register */
- vu32 INTECR; /* Interrupt Enable Clear Register */
- vu32 SWINTR; /* Software Interrupt Register */
- vu32 SWINTCR; /* Software Interrupt clear Register */
- vu32 PER; /* Protection Enable Register */
- vu32 EMPTY1[3];
- vu32 VAR; /* Vector Address Register */
- vu32 DVAR; /* Default Vector Address Register */
- vu32 EMPTY2[50];
- vu32 VAiR[16]; /* Vector Address 0-15 Register */
- vu32 EMPTY3[48];
- vu32 VCiR[16]; /* Vector Control 0-15 Register */
-} VIC_TypeDef;
-
-/*-------------------------------- Motor Control -----------------------------*/
-
-typedef struct
-{
- vu16 TCPT; /* Tacho Capture Register */
- vu16 EMPTY1;
- vu16 TCMP; /* Tacho Compare Register */
- vu16 EMPTY2;
- vu16 IPR; /* Input Pending Register */
- vu16 EMPTY3;
- vu16 TPRS; /* Tacho Prescaler Register */
- vu16 EMPTY4;
- vu16 CPRS; /* PWM Counter Prescaler Register */
- vu16 EMPTY5;
- vu16 REP; /* Repetition Counter Register */
- vu16 EMPTY6;
- vu16 CMPW; /* Compare Phase W Preload Register */
- vu16 EMPTY7;
- vu16 CMPV; /* Compare Phase V Preload Register */
- vu16 EMPTY8;
- vu16 CMPU; /* Compare Phase U Preload Register */
- vu16 EMPTY9;
- vu16 CMP0; /* Compare 0 Preload Register */
- vu16 EMPTY10;
- vu16 PCR0; /* Peripheral Control Register 0 */
- vu16 EMPTY11;
- vu16 PCR1; /* Peripheral Control Register 1 */
- vu16 EMPTY12;
- vu16 PCR2; /* Peripheral Control Register 2 */
- vu16 EMPTY13;
- vu16 PSR; /* Polarity Selection Register */
- vu16 EMPTY14;
- vu16 OPR; /* Output Peripheral Register */
- vu16 EMPTY15;
- vu16 IMR; /* Interrupt Mask Register */
- vu16 EMPTY16;
- vu16 DTG; /* Dead Time Generator Register */
- vu16 EMPTY17;
- vu16 ESC; /* Emergency Stop Clear Register */
- vu16 EMPTY18;
-}MC_TypeDef;
-
-/*------------------------------------- RTC ----------------------------------*/
-
-typedef struct
-{
- vu32 TR; /* Time Register */
- vu32 DTR; /* Date Register */
- vu32 ATR; /* Alarm time Register */
- vu32 CR; /* Control Register */
- vu32 SR; /* Status Register */
- vu32 MILR; /* Millisec Register */
-}RTC_TypeDef;
-
-/*------------------------------------- SSP ----------------------------------*/
-
-typedef struct
-{
- vu16 CR0; /* Control Register 1 */
- vu16 EMPTY1;
- vu16 CR1; /* Control Register 2 */
- vu16 EMPTY2;
- vu16 DR; /* Data Register */
- vu16 EMPTY3;
- vu16 SR; /* Status Register */
- vu16 EMPTY4;
- vu16 PR; /* Clock Prescale Register */
- vu16 EMPTY5;
- vu16 IMSCR; /* Interrupt Mask Set or Clear Register */
- vu16 EMPTY6;
- vu16 RISR; /* Raw Interrupt Status Register */
- vu16 EMPTY7;
- vu16 MISR; /* Masked Interrupt Status Register */
- vu16 EMPTY8;
- vu16 ICR; /* Interrupt Clear Register */
- vu16 EMPTY9;
- vu16 DMACR; /* DMA Control Register */
- vu16 EMPTY10;
-}SSP_TypeDef;
-
-/*------------------------------------ UART ----------------------------------*/
-
-typedef struct
-{
- vu16 DR; /* Data Register */
- vu16 EMPTY1;
- vu16 RSECR; /* Receive Status Register (read)/Error Clear Register (write) */
- vu16 EMPTY2[9];
- vu16 FR; /* Flag Register */
- vu16 EMPTY3[3];
- vu16 ILPR; /* IrDA Low-Power counter Register */
- vu16 EMPTY4;
- vu16 IBRD; /* Integer Baud Rate Divisor Register */
- vu16 EMPTY5;
- vu16 FBRD; /* Fractional Baud Rate Divisor Register */
- vu16 EMPTY6;
- vu16 LCR; /* Line Control Register, High byte */
- vu16 EMPTY7;
- vu16 CR; /* Control Register */
- vu16 EMPTY8;
- vu16 IFLS; /* Interrupt FIFO Level Select Register */
- vu16 EMPTY9;
- vu16 IMSC; /* Interrupt Mask Set/Clear Register */
- vu16 EMPTY10;
- vu16 RIS; /* Raw Interrupt Status Register */
- vu16 EMPTY11;
- vu16 MIS; /* Masked Interrupt Status Register */
- vu16 EMPTY12;
- vu16 ICR; /* Interrupt Clear Register */
- vu16 EMPTY13;
- vu16 DMACR; /* DMA Control Register */
- vu16 EMPTY14;
-}UART_TypeDef;
-
-/*------------------------------- Wake-up System -----------------------------*/
-
-typedef struct
-{
- vu32 CTRL; /* Control Register */
- vu32 MR; /* Mask Register */
- vu32 TR; /* Trigger Register */
- vu32 PR; /* Pending Register */
- vu32 INTR; /* Software Interrupt Register */
-} WIU_TypeDef;
-
-/*------------------------------- WatchDog Timer -----------------------------*/
-
-typedef struct
-{
- vu16 CR; /* Control Register */
- vu16 EMPTY1;
- vu16 PR; /* Presclar Register */
- vu16 EMPTY2;
- vu16 VR; /* Pre-load Value Register */
- vu16 EMPTY3;
- vu16 CNT; /* Counter Register */
- vu16 EMPTY4;
- vu16 SR; /* Status Register */
- vu16 EMPTY5;
- vu16 MR; /* Mask Register */
- vu16 EMPTY6;
- vu16 KR; /* Key Register */
- vu16 EMPTY7;
-} WDG_TypeDef;
-
-/*******************************************************************************
-* Memory Mapping of STR91x *
-*******************************************************************************/
-
-#define AHB_APB_BRDG0_U (0x58000000) /* AHB/APB Bridge 0 UnBuffered Space */
-#define AHB_APB_BRDG0_B (0x48000000) /* AHB/APB Bridge 0 Buffered Space */
-
-#define AHB_APB_BRDG1_U (0x5C000000) /* AHB/APB Bridge 1 UnBuffered Space */
-#define AHB_APB_BRDG1_B (0x4C000000) /* AHB/APB Bridge 1 Buffered Space */
-
-#define AHB_EMI_U (0x74000000) /* EMI UnBuffered Space */
-#define AHB_EMI_B (0x64000000) /* EMI Buffered Space */
-
-#define AHB_DMA_U (0x78000000) /* DMA UnBuffered Space */
-#define AHB_DMA_B (0x68000000) /* DMA Buffered Space */
-
-#define AHB_ENET_MAC_U (0x7C000400) /* ENET_MAC UnBuffered Space */
-#define AHB_ENET_MAC_B (0x6C000000) /* ENET_MAC Buffered Space */
-
-#define AHB_ENET_DMA_U (0x7C000000) /* ENET_DMA Unbuffered Space */
-#define AHB_ENET_DMA_B (0x6C000400) /* ENET_DMA Buffered Space */
-
-#define AHB_VIC1_U (0xFC000000) /* Secondary VIC1 UnBuffered Space */
-#define AHB_VIC0_U (0xFFFFF000) /* Primary VIC0 UnBuffered Space */
-
-#define AHB_FMI_U (0x54000000) /* FMI Unbuffered Space */
-#define AHB_FMI_B (0x44000000) /* FMI buffered Space */
-
-/*******************************************************************************
-* Addresses related to the VICs' peripherals *
-*******************************************************************************/
-
-#define VIC0_BASE (AHB_VIC0_U)
-#define VIC1_BASE (AHB_VIC1_U)
-
-/*******************************************************************************
-* Addresses related to the EMI banks *
-*******************************************************************************/
-
-#define AHB_EMIB3_OFST (0x00000040) /* Offset of EMI bank3 */
-#define AHB_EMIB2_OFST (0x00000020) /* Offset of EMI bank2 */
-#define AHB_EMIB1_OFST (0x00000000) /* Offset of EMI bank1 */
-#define AHB_EMIB0_OFST (0x000000E0) /* Offset of EMI bank0 */
-
-/*******************************************************************************
-* Addresses related to the DMA peripheral *
-*******************************************************************************/
-
-#define AHB_DMA_Channel0_OFST (0x00000100) /* Offset of Channel 0 */
-#define AHB_DMA_Channel1_OFST (0x00000120) /* Offset of Channel 1 */
-#define AHB_DMA_Channel2_OFST (0x00000140) /* Offset of Channel 2 */
-#define AHB_DMA_Channel3_OFST (0x00000160) /* Offset of Channel 3 */
-#define AHB_DMA_Channel4_OFST (0x00000180) /* Offset of Channel 4 */
-#define AHB_DMA_Channel5_OFST (0x000001A0) /* Offset of Channel 5 */
-#define AHB_DMA_Channel6_OFST (0x000001C0) /* Offset of Channel 6 */
-#define AHB_DMA_Channel7_OFST (0x000001E0) /* Offset of Channel 7 */
-
-/*******************************************************************************
-* Addresses related to the APB0 sub-system *
-*******************************************************************************/
-
-#define APB_WIU_OFST (0x00001000) /* Offset of WIU */
-#define APB_TIM0_OFST (0x00002000) /* Offset of TIM0 */
-#define APB_TIM1_OFST (0x00003000) /* Offset of TIM1 */
-#define APB_TIM2_OFST (0x00004000) /* Offset of TIM2 */
-#define APB_TIM3_OFST (0x00005000) /* Offset of TIM3 */
-#define APB_GPIO0_OFST (0x00006000) /* Offset of GPIO0 */
-#define APB_GPIO1_OFST (0x00007000) /* Offset of GPIO1 */
-#define APB_GPIO2_OFST (0x00008000) /* Offset of GPIO2 */
-#define APB_GPIO3_OFST (0x00009000) /* Offset of GPIO3 */
-#define APB_GPIO4_OFST (0x0000A000) /* Offset of GPIO4 */
-#define APB_GPIO5_OFST (0x0000B000) /* Offset of GPIO5 */
-#define APB_GPIO6_OFST (0x0000C000) /* Offset of GPIO6 */
-#define APB_GPIO7_OFST (0x0000D000) /* Offset of GPIO7 */
-#define APB_GPIO8_OFST (0x0000E000) /* Offset of GPIO8 */
-#define APB_GPIO9_OFST (0x0000F000) /* Offset of GPIO9 */
-
-/*******************************************************************************
-* Addresses related to the APB1 sub-system *
-*******************************************************************************/
-
-#define APB_RTC_OFST (0x00001000) /* Offset of RTC */
-#define APB_SCU_OFST (0x00002000) /* Offset of System Controller */
-#define APB_MC_OFST (0x00003000) /* Offset of Motor Control */
-#define APB_UART0_OFST (0x00004000) /* Offset of UART0 */
-#define APB_UART1_OFST (0x00005000) /* Offset of UART1 */
-#define APB_UART2_OFST (0x00006000) /* Offset of UART2 */
-#define APB_SSP0_OFST (0x00007000) /* Offset of SSP0 */
-#define APB_SSP1_OFST (0x00008000) /* Offset of SSPI */
-#define APB_CAN_OFST (0x00009000) /* Offset of CAN */
-#define APB_ADC_OFST (0x0000A000) /* Offset of ADC */
-#define APB_WDG_OFST (0x0000B000) /* Offset of WDG */
-#define APB_I2C0_OFST (0x0000C000) /* Offset of I2C0 */
-#define APB_I2C1_OFST (0x0000D000) /* Offset of I2C1 */
-
-/*----------------------------------------------------------------------------*/
-/*----------------------------- Unbuffered Mode ------------------------------*/
-/*----------------------------------------------------------------------------*/
-
-#ifndef LIBUFF
-
-/*******************************************************************************
-* AHBAPB peripheral Unbuffered Base Address *
-*******************************************************************************/
-
-#define AHBAPB0_BASE (AHB_APB_BRDG0_U)
-#define AHBAPB1_BASE (AHB_APB_BRDG1_U)
-
-/*******************************************************************************
-* ENET peripheral Unbuffered Base Address *
-*******************************************************************************/
-
-#define ENET_MAC_BASE (AHB_ENET_MAC_U)
-#define ENET_DMA_BASE (AHB_ENET_DMA_U)
-
-/*******************************************************************************
-* DMA peripheral Unbuffered Base Address *
-*******************************************************************************/
-
-#define DMA_BASE (AHB_DMA_U)
-
-/*******************************************************************************
-* EMI peripheral Unbuffered Base Address *
-*******************************************************************************/
-
-#define EMI_BASE (AHB_EMI_U)
-
-/*******************************************************************************
-* FMI peripheral Unbuffered Base Address *
-*******************************************************************************/
-
-#define FMI_BASE (AHB_FMI_U)
-
-
-#else /* LIBUFF */
-
-/*----------------------------------------------------------------------------*/
-/*------------------------------ Buffered Mode -------------------------------*/
-/*----------------------------------------------------------------------------*/
-
-/*******************************************************************************
-* AHBAPB peripheral Buffered Base Address *
-*******************************************************************************/
-
-#define AHBAPB0_BASE (AHB_APB_BRDG0_B)
-#define AHBAPB1_BASE (AHB_APB_BRDG1_B)
-
-/*******************************************************************************
-* ENET peripheral Unbuffered Base Address *
-*******************************************************************************/
-
-#define ENET_MAC_BASE (AHB_ENET_MAC_B)
-#define ENET_DMA_BASE (AHB_ENET_DMA_B)
-
-/*******************************************************************************
-* DMA peripheral Buffered Base Address *
-*******************************************************************************/
-
-#define DMA_BASE (AHB_DMA_B)
-
-/*******************************************************************************
-* EMI peripheral Buffered Base Address *
-*******************************************************************************/
-
-#define EMI_BASE (AHB_EMI_B)
-
-/*******************************************************************************
-* FMI peripheral Buffered Base Address *
-*******************************************************************************/
-
-#define FMI_BASE (AHB_FMI_B)
-
-#endif /* LIBUFF */
-
-/*******************************************************************************
-* DMA channels Base Address *
-*******************************************************************************/
-#define DMA_Channel0_BASE (DMA_BASE + AHB_DMA_Channel0_OFST)
-#define DMA_Channel1_BASE (DMA_BASE + AHB_DMA_Channel1_OFST)
-#define DMA_Channel2_BASE (DMA_BASE + AHB_DMA_Channel2_OFST)
-#define DMA_Channel3_BASE (DMA_BASE + AHB_DMA_Channel3_OFST)
-#define DMA_Channel4_BASE (DMA_BASE + AHB_DMA_Channel4_OFST)
-#define DMA_Channel5_BASE (DMA_BASE + AHB_DMA_Channel5_OFST)
-#define DMA_Channel6_BASE (DMA_BASE + AHB_DMA_Channel6_OFST)
-#define DMA_Channel7_BASE (DMA_BASE + AHB_DMA_Channel7_OFST)
-
-/*******************************************************************************
-* EMI Banks peripheral Base Address *
-*******************************************************************************/
-
-#define EMI_Bank0_BASE (EMI_BASE + AHB_EMIB0_OFST)
-#define EMI_Bank1_BASE (EMI_BASE + AHB_EMIB1_OFST)
-#define EMI_Bank2_BASE (EMI_BASE + AHB_EMIB2_OFST)
-#define EMI_Bank3_BASE (EMI_BASE + AHB_EMIB3_OFST)
-
-/*******************************************************************************
-* APB0 Peripherals' Base addresses *
-*******************************************************************************/
-
-#define WIU_BASE (AHBAPB0_BASE + APB_WIU_OFST)
-#define TIM0_BASE (AHBAPB0_BASE + APB_TIM0_OFST)
-#define TIM1_BASE (AHBAPB0_BASE + APB_TIM1_OFST)
-#define TIM2_BASE (AHBAPB0_BASE + APB_TIM2_OFST)
-#define TIM3_BASE (AHBAPB0_BASE + APB_TIM3_OFST)
-#define GPIO0_BASE (AHBAPB0_BASE + APB_GPIO0_OFST)
-#define GPIO1_BASE (AHBAPB0_BASE + APB_GPIO1_OFST)
-#define GPIO2_BASE (AHBAPB0_BASE + APB_GPIO2_OFST)
-#define GPIO3_BASE (AHBAPB0_BASE + APB_GPIO3_OFST)
-#define GPIO4_BASE (AHBAPB0_BASE + APB_GPIO4_OFST)
-#define GPIO5_BASE (AHBAPB0_BASE + APB_GPIO5_OFST)
-#define GPIO6_BASE (AHBAPB0_BASE + APB_GPIO6_OFST)
-#define GPIO7_BASE (AHBAPB0_BASE + APB_GPIO7_OFST)
-#define GPIO8_BASE (AHBAPB0_BASE + APB_GPIO8_OFST)
-#define GPIO9_BASE (AHBAPB0_BASE + APB_GPIO9_OFST)
-
-/*******************************************************************************
-* APB1 Peripherals' Base addresses *
-*******************************************************************************/
-
-#define RTC_BASE (AHBAPB1_BASE + APB_RTC_OFST)
-#define SCU_BASE (AHBAPB1_BASE + APB_SCU_OFST)
-#define MC_BASE (AHBAPB1_BASE + APB_MC_OFST)
-#define UART0_BASE (AHBAPB1_BASE + APB_UART0_OFST)
-#define UART1_BASE (AHBAPB1_BASE + APB_UART1_OFST)
-#define UART2_BASE (AHBAPB1_BASE + APB_UART2_OFST)
-#define SSP0_BASE (AHBAPB1_BASE + APB_SSP0_OFST)
-#define SSP1_BASE (AHBAPB1_BASE + APB_SSP1_OFST)
-#define CAN_BASE (AHBAPB1_BASE + APB_CAN_OFST)
-#define ADC_BASE (AHBAPB1_BASE + APB_ADC_OFST)
-#define WDG_BASE (AHBAPB1_BASE + APB_WDG_OFST)
-#define I2C0_BASE (AHBAPB1_BASE + APB_I2C0_OFST)
-#define I2C1_BASE (AHBAPB1_BASE + APB_I2C1_OFST)
-
-/*******************************************************************************
-* IPs' declaration *
-*******************************************************************************/
-
-/*------------------------------ Non Debug Mode ------------------------------*/
-
-#ifndef LIBDEBUG
-
-/*********************************** AHBAPB ***********************************/
-
-#define AHBAPB0 ((AHBAPB_TypeDef *)AHBAPB0_BASE)
-#define AHBAPB1 ((AHBAPB_TypeDef *)AHBAPB1_BASE)
-
-/************************************* EMI ************************************/
-
-#define EMI ((EMI_TypeDef *)EMI_BASE)
-
-/************************************* DMA ************************************/
-
-#define DMA ((DMA_TypeDef *)DMA_BASE)
-#define DMA_Channel0 ((DMA_Channel_TypeDef *)DMA_Channel0_BASE)
-#define DMA_Channel1 ((DMA_Channel_TypeDef *)DMA_Channel1_BASE)
-#define DMA_Channel2 ((DMA_Channel_TypeDef *)DMA_Channel2_BASE)
-#define DMA_Channel3 ((DMA_Channel_TypeDef *)DMA_Channel3_BASE)
-#define DMA_Channel4 ((DMA_Channel_TypeDef *)DMA_Channel4_BASE)
-#define DMA_Channel5 ((DMA_Channel_TypeDef *)DMA_Channel5_BASE)
-#define DMA_Channel6 ((DMA_Channel_TypeDef *)DMA_Channel6_BASE)
-#define DMA_Channel7 ((DMA_Channel_TypeDef *)DMA_Channel7_BASE)
-
-/************************************* EMI ************************************/
-
-#define EMI_Bank0 ((EMI_Bank_TypeDef *)EMI_Bank0_BASE)
-#define EMI_Bank1 ((EMI_Bank_TypeDef *)EMI_Bank1_BASE)
-#define EMI_Bank2 ((EMI_Bank_TypeDef *)EMI_Bank2_BASE)
-#define EMI_Bank3 ((EMI_Bank_TypeDef *)EMI_Bank3_BASE)
-
-/************************************* ENET_MAC ************************************/
-
-#define ENET_MAC ((ENET_MAC_TypeDef *)ENET_MAC_BASE)
-
-/************************************* ENET_DMA ************************************/
-
-#define ENET_DMA ((ENET_DMA_TypeDef *)ENET_DMA_BASE)
-
-/************************************* FMI ************************************/
-
-#define FMI ((FMI_TypeDef *)FMI_BASE)
-
-/************************************* VIC ************************************/
-
-#define VIC0 ((VIC_TypeDef *)VIC0_BASE)
-#define VIC1 ((VIC_TypeDef *)VIC1_BASE)
-
-/*******************************************************************************
-* APB0 Peripherals' *
-*******************************************************************************/
-#define WIU ((WIU_TypeDef *)WIU_BASE)
-#define TIM0 ((TIM_TypeDef *)TIM0_BASE)
-#define TIM1 ((TIM_TypeDef *)TIM1_BASE)
-#define TIM2 ((TIM_TypeDef *)TIM2_BASE)
-#define TIM3 ((TIM_TypeDef *)TIM3_BASE)
-#define GPIO0 ((GPIO_TypeDef *)GPIO0_BASE)
-#define GPIO1 ((GPIO_TypeDef *)GPIO1_BASE)
-#define GPIO2 ((GPIO_TypeDef *)GPIO2_BASE)
-#define GPIO3 ((GPIO_TypeDef *)GPIO3_BASE)
-#define GPIO4 ((GPIO_TypeDef *)GPIO4_BASE)
-#define GPIO5 ((GPIO_TypeDef *)GPIO5_BASE)
-#define GPIO6 ((GPIO_TypeDef *)GPIO6_BASE)
-#define GPIO7 ((GPIO_TypeDef *)GPIO7_BASE)
-#define GPIO8 ((GPIO_TypeDef *)GPIO8_BASE)
-#define GPIO9 ((GPIO_TypeDef *)GPIO9_BASE)
-/*******************************************************************************
-* APB1 Peripherals' *
-*******************************************************************************/
-#define RTC ((RTC_TypeDef *)RTC_BASE)
-#define SCU ((SCU_TypeDef *)SCU_BASE)
-#define MC ((MC_TypeDef *)MC_BASE)
-#define UART0 ((UART_TypeDef *)UART0_BASE)
-#define UART1 ((UART_TypeDef *)UART1_BASE)
-#define UART2 ((UART_TypeDef *)UART2_BASE)
-#define SSP0 ((SSP_TypeDef *)SSP0_BASE)
-#define SSP1 ((SSP_TypeDef *)SSP1_BASE)
-#define CAN ((CAN_TypeDef *)CAN_BASE)
-#define ADC ((ADC_TypeDef *)ADC_BASE)
-#define WDG ((WDG_TypeDef *)WDG_BASE)
-#define I2C0 ((I2C_TypeDef *)I2C0_BASE)
-#define I2C1 ((I2C_TypeDef *)I2C1_BASE)
-#define ENET_MAC ((ENET_MAC_TypeDef *)ENET_MAC_BASE)
-#define ENET_DMA ((ENET_DMA_TypeDef *)ENET_DMA_BASE)
-
-#else /* LIBDEBUG */
-
-/*-------------------------------- Debug Mode --------------------------------*/
-
-EXT AHBAPB_TypeDef *AHBAPB0;
-EXT AHBAPB_TypeDef *AHBAPB1;
-EXT DMA_TypeDef *DMA;
-EXT DMA_Channel_TypeDef *DMA_Channel0;
-EXT DMA_Channel_TypeDef *DMA_Channel1;
-EXT DMA_Channel_TypeDef *DMA_Channel2;
-EXT DMA_Channel_TypeDef *DMA_Channel3;
-EXT DMA_Channel_TypeDef *DMA_Channel4;
-EXT DMA_Channel_TypeDef *DMA_Channel5;
-EXT DMA_Channel_TypeDef *DMA_Channel6;
-EXT DMA_Channel_TypeDef *DMA_Channel7;
-EXT EMI_Bank_TypeDef *EMI_Bank0;
-EXT EMI_Bank_TypeDef *EMI_Bank1;
-EXT EMI_Bank_TypeDef *EMI_Bank2;
-EXT EMI_Bank_TypeDef *EMI_Bank3;
-EXT FMI_TypeDef *FMI;
-EXT VIC_TypeDef *VIC0;
-EXT VIC_TypeDef *VIC1;
-EXT WIU_TypeDef *WIU;
-EXT TIM_TypeDef *TIM0;
-EXT TIM_TypeDef *TIM1;
-EXT TIM_TypeDef *TIM2;
-EXT TIM_TypeDef *TIM3;
-EXT GPIO_TypeDef *GPIO0;
-EXT GPIO_TypeDef *GPIO1;
-EXT GPIO_TypeDef *GPIO2;
-EXT GPIO_TypeDef *GPIO3;
-EXT GPIO_TypeDef *GPIO4;
-EXT GPIO_TypeDef *GPIO5;
-EXT GPIO_TypeDef *GPIO6;
-EXT GPIO_TypeDef *GPIO7;
-EXT GPIO_TypeDef *GPIO8;
-EXT GPIO_TypeDef *GPIO9;
-EXT RTC_TypeDef *RTC;
-EXT SCU_TypeDef *SCU;
-EXT MC_TypeDef *MC;
-EXT UART_TypeDef *UART0;
-EXT UART_TypeDef *UART1;
-EXT UART_TypeDef *UART2;
-EXT SSP_TypeDef *SSP0;
-EXT SSP_TypeDef *SSP1;
-EXT CAN_TypeDef *CAN;
-EXT ADC_TypeDef *ADC;
-EXT WDG_TypeDef *WDG;
-EXT I2C_TypeDef *I2C0;
-EXT I2C_TypeDef *I2C1;
-EXT ENET_MAC_TypeDef *ENET_MAC;
-EXT ENET_DMA_TypeDef *ENET_DMA;
-
-
-#endif /* LIBDEBUG */
-
-#endif /* __91x_MAP_H*/
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
-
diff --git a/uc_str912/prj_template91x/str91x_lib/include/91x_mc.h b/uc_str912/prj_template91x/str91x_lib/include/91x_mc.h deleted file mode 100644 index b33b7c3..0000000 --- a/uc_str912/prj_template91x/str91x_lib/include/91x_mc.h +++ /dev/null @@ -1,144 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_mc.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file contains all the functions prototypes for the
-* MC software library.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __91x_MC_H
-#define __91x_MC_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_map.h"
-
-/* Exported types ------------------------------------------------------------*/
-typedef struct
-{
- u16 MC_OperatingMode;
- u16 MC_TachoMode;
- u16 MC_TachoEvent_Mode;
- u8 MC_Prescaler;
- u8 MC_ForcedPWMState;
- u16 MC_TachoPrescaler;
- u16 MC_PWMMode;
- u16 MC_Complementary;
- u16 MC_Emergency;
- u16 MC_Period;
- u16 MC_TachoPeriod;
- u16 MC_Channel;
- u16 MC_PulseU;
- u16 MC_PulseV;
- u16 MC_PulseW;
- u16 MC_PolarityUL;
- u16 MC_PolarityUH;
- u16 MC_PolarityVL;
- u16 MC_PolarityVH;
- u16 MC_PolarityWL;
- u16 MC_PolarityWH;
- u16 MC_TachoPolarity;
- u16 MC_DeadTime;
- u8 MC_RepetitionCounter;
-} MC_InitTypeDef;
-
-typedef enum { DOWN = 0, UP = !DOWN} CountingStatus;
-
-/* Exported constants --------------------------------------------------------*/
-#define MC_Complementary_Enable 0x0001
-#define MC_Complementary_Disable 0x0002
-
-#define MC_HardwareOperating_Mode 0x0001
-#define MC_SoftwareOperating_Mode 0x0002
-
-#define MC_PWMClassical_Mode 0x0001
-#define MC_PWMZeroCentered_Mode 0x0002
-
-#define MC_Emergency_Enable 0x0001
-#define MC_Emergency_Disable 0x0002
-
-#define MC_Polarity_Inverted 0x0001
-#define MC_Polarity_NonInverted 0x0002
-
-#define MC_TachoOneShot_Mode 0x0001
-#define MC_TachoContinuous_Mode 0x0002
-
-#define MC_TachoEventEdge_None 0x0000
-#define MC_TachoEventEdge_Falling 0x0001
-#define MC_TachoEventEdge_Rising 0x0002
-#define MC_TachoEventEdge_RisingFalling 0x0003
-
-#define MC_Channel_U 0x0001
-#define MC_Channel_V 0x0002
-#define MC_Channel_W 0x0003
-#define MC_Channel_ALL 0x0004
-
-
-#define MC_TachoEvent_Hardware_Mode 0x0001
-#define MC_TachoEvent_Software_Mode 0x0002
-
-#define MC_IT_CMPW 0x0001
-#define MC_IT_CMPV 0x0002
-#define MC_IT_CMPU 0x0004
-#define MC_IT_ZPC 0x0008
-#define MC_IT_ADT 0x0010
-#define MC_IT_OTC 0x0020
-#define MC_IT_CPT 0x0040
-#define MC_IT_CM0 0x0080
-
-#define MC_FLAG_CMPW 0x0001
-#define MC_FLAG_CMPV 0x0002
-#define MC_FLAG_CMPU 0x0004
-#define MC_FLAG_ZPC 0x0008
-#define MC_FLAG_ADT 0x0010
-#define MC_FLAG_OTC 0x0020
-#define MC_FLAG_CPT 0x0040
-#define MC_FLAG_CM0 0x0080
-#define MC_FLAG_EST 0x0100
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-void MC_Init(MC_InitTypeDef* MC_InitStruct);
-void MC_DeInit(void);
-void MC_StructInit(MC_InitTypeDef* MC_InitStruct);
-void MC_Cmd(FunctionalState NewState);
-void MC_CtrlPWMOutputs(FunctionalState Newstate);
-void MC_ITConfig(u16 MC_IT, FunctionalState NewState);
-void MC_SetPrescaler(u8 Prescaler);
-void MC_SetPeriod(u16 MC_Period);
-void MC_SetPulseU(u16 MC_PulseU);
-void MC_SetPulseV(u16 MC_PulseV);
-void MC_SetPulseW(u16 MC_PulseW);
-void MC_SetTachoCompare(u8 MC_Compare);
-void MC_PWMModeConfig(u16 MC_PWMMode);
-void MC_SetDeadTime(u16 MC_DeadTime);
-void MC_EmergencyCmd(FunctionalState NewState);
-void MC_EmergencyClear(void);
-u16 MC_GetPeriod(void);
-u16 MC_GetPulseU(void);
-u16 MC_GetPulseV(void);
-u16 MC_GetPulseW(void);
-u16 MC_GetTachoCapture(void);
-void MC_ClearOnTachoCapture(FunctionalState NewState);
-void MC_ForceDataTransfer(u8 MC_ForcedData);
-void MC_SoftwarePreloadConfig(void);
-void MC_SoftwareTachoCapture(void);
-CountingStatus MC_GetCountingStatus(void);
-FlagStatus MC_GetFlagStatus(u16 MC_FLAG);
-void MC_ClearFlag(u16 MC_FLAG);
-ITStatus MC_GetITStatus(u16 MC_IT);
-void MC_ClearITPendingBit(u16 MC_IT);
-
-#endif /* __91x_MC_H */
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
-
diff --git a/uc_str912/prj_template91x/str91x_lib/include/91x_rtc.h b/uc_str912/prj_template91x/str91x_lib/include/91x_rtc.h deleted file mode 100644 index 25a2805..0000000 --- a/uc_str912/prj_template91x/str91x_lib/include/91x_rtc.h +++ /dev/null @@ -1,109 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_rtc.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file provides the RTC library software functions
-* prototypes & definitions
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
-* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __91x_RTC_H
-#define __91x_RTC_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_map.h"
-
-/* Private typedef -----------------------------------------------------------*/
-typedef struct
-{
- u8 century;
- u8 year;
- u8 month;
- u8 day;
- u8 weekday;
-}RTC_DATE;
-
-typedef struct
-{
- u8 hours;
- u8 minutes;
- u8 seconds;
- u16 milliseconds;
-}RTC_TIME;
-
-typedef struct
-{
- u8 day;
- u8 hours;
- u8 minutes;
- u8 seconds;
-}RTC_ALARM;
-
-/* Exported constants --------------------------------------------------------*/
-
-#define BINARY 0
-#define BCD 1
-
-/*TamperMode*/
-#define RTC_TamperMode_Edge 0xFFFFFFEF
-#define RTC_TamperMode_Level 0x10
-
-/*TamperPol*/
-#define RTC_TamperPol_High 0x4
-#define RTC_TamperPol_Low 0xFFFFFFFB
-
-/*PeriodicClock*/
-#define RTC_Per_2Hz 0x10000
-#define RTC_Per_16Hz 0x20000
-#define RTC_Per_128Hz 0x40000
-#define RTC_Per_1024Hz 0x80000
-#define RTC_Per_DISABLE 0x0
-
-/*RTC_IT*/
-#define RTC_IT_Per 0x200000
-#define RTC_IT_Alarm 0x800000
-#define RTC_IT_Tamper 0x400000
-
-/*RTC_FLAG*/
-#define RTC_FLAG_Per 0x80000000
-#define RTC_FLAG_Alarm 0x40000000
-#define RTC_FLAG_Tamper 0x10000000
-
-
-/* Module private variables --------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-void RTC_DeInit(void);
-void RTC_SetDate(RTC_DATE Date);
-void RTC_SetTime(RTC_TIME Time);
-void RTC_SetAlarm(RTC_ALARM Alarm);
-void RTC_GetDate(u8 Format, RTC_DATE * Date);
-void RTC_GetTime(u8 Format, RTC_TIME * Time);
-void RTC_GetAlarm(u8 Format, RTC_ALARM * Alarm);
-void RTC_TamperConfig(u32 TamperMode, u32 TamperPol);
-void RTC_TamperCmd(FunctionalState NewState);
-void RTC_AlarmCmd(FunctionalState NewState);
-void RTC_CalibClockCmd(FunctionalState NewState);
-void RTC_SRAMBattPowerCmd(FunctionalState NewState);
-void RTC_PeriodicIntConfig(u32 PeriodicClock);
-void RTC_ITConfig(u32 RTC_IT, FunctionalState NewState);
-FlagStatus RTC_GetFlagStatus(u32 RTC_FLAG);
-void RTC_ClearFlag(u32 RTC_FLAG);
-#endif /*__91x_RTC_H*/
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
-
-
-
diff --git a/uc_str912/prj_template91x/str91x_lib/include/91x_scu.h b/uc_str912/prj_template91x/str91x_lib/include/91x_scu.h deleted file mode 100644 index 22d9260..0000000 --- a/uc_str912/prj_template91x/str91x_lib/include/91x_scu.h +++ /dev/null @@ -1,198 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_scu.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file provides the SCU library software functions
-* prototypes & definitions
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
-* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __91x_SCU_H
-#define __91x_SCU_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_map.h"
-
-/* Exported constants --------------------------------------------------------*/
-
-/*MCLK_Source*/
-#define SCU_MCLK_PLL 0x0
-#define SCU_MCLK_RTC 0x1
-#define SCU_MCLK_OSC 0x2
-
-/*RCLK_Divisor*/
-#define SCU_RCLK_Div1 0xFFFFFFE3
-#define SCU_RCLK_Div2 0x4
-#define SCU_RCLK_Div4 0x8
-#define SCU_RCLK_Div8 0xC
-#define SCU_RCLK_Div16 0x10
-#define SCU_RCLK_Div1024 0x14
-
-/*HCLK_Divisor*/
-#define SCU_HCLK_Div1 0xFFFFFF9F
-#define SCU_HCLK_Div2 0x20
-#define SCU_HCLK_Div4 0x40
-
-/*PCLK_Divisor*/
-#define SCU_PCLK_Div1 0xFFFFFE7F
-#define SCU_PCLK_Div2 0x80
-#define SCU_PCLK_Div4 0x100
-#define SCU_PCLK_Div8 0x180
-
-/*FMICLK_Divisor*/
-#define SCU_FMICLK_Div1 0xFFFEFFFF
-#define SCU_FMICLK_Div2 0x10000
-
-/*BRCLK_Divisor*/
-#define SCU_BRCLK_Div1 0xFFFFFDFF
-#define SCU_BRCLK_Div2 0x200
-
-/*TIMCLK_Source*/
-#define SCU_TIMCLK_EXT 0x1
-#define SCU_TIMCLK_INT 0x0
-
-/*TIMx*/
-#define SCU_TIM01 0x0
-#define SCU_TIM23 0x1
-
-
-/*USBCLK_Source*/
-#define SCU_USBCLK_MCLK 0xFFFFF3FF
-#define SCU_USBCLK_MCLK2 0x400
-#define SCU_USBCLK_EXT 0x800
-
-/*SCU_EMIBCLK*/
-#define SCU_EMIBCLK_Div1 0xFFF9FFFF
-#define SCU_EMIBCLK_Div2 0x20000
-
-/*SCU_EMIMODE*/
-#define SCU_EMI_MUX 0xFFFFFFBF
-#define SCU_EMI_DEMUX 0x40
-
-/*SCU_EMIALE_LEN*/
-#define SCU_EMIALE_LEN1 0xFFFFFEFF
-#define SCU_EMIALE_LEN2 0x100
-
-/*SCU_EMIALE_POL*/
-#define SCU_EMIALE_POLLow 0xFFFFFF7F
-#define SCU_EMIALE_POLHigh 0x80
-
-/*UART_IrDA_Mode*/
-#define SCU_UARTMode_IrDA 0x1
-#define SCU_UARTMode_UART 0x0
-
-/*APBPeriph*/
-#define __TIM01 0x1
-#define __TIM23 0x2
-#define __MC 0x4
-#define __UART0 0x8
-#define __UART1 0x10
-#define __UART2 0x20
-#define __I2C0 0x40
-#define __I2C1 0x80
-#define __SSP0 0x100
-#define __SSP1 0x200
-#define __CAN 0x400
-#define __ADC 0x800
-#define __WDG 0x1000
-#define __WIU 0x2000
-#define __GPIO0 0x4000
-#define __GPIO1 0x8000
-#define __GPIO2 0x10000
-#define __GPIO3 0x20000
-#define __GPIO4 0x40000
-#define __GPIO5 0x80000
-#define __GPIO6 0x100000
-#define __GPIO7 0x200000
-#define __GPIO8 0x400000
-#define __GPIO9 0x800000
-#define __RTC 0x1000000
-
-/*AHBPeriph*/
-#define __FMI 0x1
-#define __FPQBC 0x2
-#define __SRAM 0x8
-#define __SRAM_ARBITER 0x10
-#define __VIC 0x20
-#define __EMI 0x40
-#define __EMI_MEM_CLK 0x80
-#define __DMA 0x100
-#define __USB 0x200
-#define __USB48M 0x400
-#define __ENET 0x800
-#define __PFQBC_AHB 0x1000
-
-/*SCU_IT*/
-#define SCU_IT_LVD_RST 0x10
-#define SCU_IT_SRAM_ERROR 0x8
-#define SCU_IT_ACK_PFQBC 0x4
-#define SCU_IT_LOCK_LOST 0x2
-#define SCU_IT_LOCK 0x1
-
-/*SCU_FLAG*/
-#define SCU_FLAG_SRAM_ERROR 0x20
-#define SCU_FLAG_ACK_PFQBC 0x10
-#define SCU_FLAG_LVD_RESET 0x8
-#define SCU_FLAG_WDG_RST 0x4
-#define SCU_FLAG_LOCK_LOST 0x2
-#define SCU_FLAG_LOCK 0x1
-
-
-/* Module private variables --------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-ErrorStatus SCU_MCLKSourceConfig(u32 MCLK_Source);
-ErrorStatus SCU_PLLFactorsConfig(u8 PLLN, u8 PLLM, u8 PLLP);
-ErrorStatus SCU_PLLCmd(FunctionalState NewState);
-void SCU_RCLKDivisorConfig(u32 RCLK_Divisor);
-void SCU_HCLKDivisorConfig(u32 HCLK_Divisor);
-void SCU_PCLKDivisorConfig(u32 PCLK_Divisor);
-void SCU_APBPeriphClockConfig(u32 APBPeriph, FunctionalState NewState);
-void SCU_AHBPeriphClockConfig(u32 AHBPeriph, FunctionalState NewState);
-void SCU_APBPeriphReset(u32 APBPeriph, FunctionalState NewState);
-void SCU_AHBPeriphReset(u32 AHBPeriph, FunctionalState NewState);
-void SCU_APBPeriphIdleConfig(u32 APBPeriph, FunctionalState NewState);
-void SCU_AHBPeriphIdleConfig(u32 AHBPeriph, FunctionalState NewState);
-void SCU_APBPeriphDebugConfig(u32 APBPeriph, FunctionalState NewState);
-void SCU_AHBPeriphDebugConfig(u32 AHBPeriph, FunctionalState NewState);
-void SCU_BRCLKDivisorConfig(u32 BRCLK_Divisor);
-void SCU_TIMCLKSourceConfig(u8 TIMx, u32 TIMCLK_Source);
-void SCU_TIMPresConfig(u8 TIMx, u16 Prescaler);
-void SCU_USBCLKConfig(u32 USBCLK_Source);
-void SCU_PHYCLKConfig(FunctionalState NewState);
-void SCU_FMICLKDivisorConfig(u32 FMICLK_Divisor);
-void SCU_EMIBCLKDivisorConfig(u32 SCU_EMIBCLK);
-void SCU_EMIModeConfig(u32 SCU_EMIMODE);
-void SCU_EMIALEConfig(u32 SCU_EMIALE_LEN, u32 SCU_EMIALE_POL);
-void SCU_ITConfig(u32 SCU_IT, FunctionalState NewState);
-FlagStatus SCU_GetFlagStatus(u32 SCU_Flag);
-void SCU_ClearFlag(u32 SCU_Flag);
-u32 SCU_GetPLLFreqValue(void);
-u32 SCU_GetMCLKFreqValue(void);
-u32 SCU_GetRCLKFreqValue(void);
-u32 SCU_GetHCLKFreqValue(void);
-u32 SCU_GetPCLKFreqValue(void);
-void SCU_WakeUpLineConfig(u8 EXTint);
-void SCU_SpecIntRunModeConfig(FunctionalState NewState);
-void SCU_EnterIdleMode(void);
-void SCU_EnterSleepMode(void);
-void SCU_UARTIrDASelect(UART_TypeDef * UARTx, u8 UART_IrDA_Mode);
-void SCU_PFQBCCmd(FunctionalState NewState);
-
-extern const u32 _Main_Crystal;
-
-#endif /*__91x_SCU_H*/
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/include/91x_ssp.h b/uc_str912/prj_template91x/str91x_lib/include/91x_ssp.h deleted file mode 100644 index e356d4f..0000000 --- a/uc_str912/prj_template91x/str91x_lib/include/91x_ssp.h +++ /dev/null @@ -1,119 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_ssp.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file contains all the functions prototypes for the
-* SSP software library.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __91x_SSP_H
-#define __91x_SSP_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_map.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* SSP Init structure definition */
-typedef struct
-{
- u16 SSP_FrameFormat ;
- u16 SSP_Mode ;
- u16 SSP_CPOL ;
- u16 SSP_CPHA ;
- u16 SSP_DataSize ;
- u16 SSP_SlaveOutput ;
- u8 SSP_ClockRate ;
- u8 SSP_ClockPrescaler ;
-}SSP_InitTypeDef;
-
-/* Exported constants --------------------------------------------------------*/
-/* SSP Frame Format Select */
-#define SSP_FrameFormat_TI 0x0010
-#define SSP_FrameFormat_Motorola 0xFFCF
-#define SSP_FrameFormat_Microwire 0x0020
-
-/* SSP Master/Slave Select */
-#define SSP_Mode_Master 0xFFFB
-#define SSP_Mode_Slave 0x0004
-
-/* SSP Clock Polarity */
-#define SSP_CPOL_Low 0xFFBF
-#define SSP_CPOL_High 0x0040
-
-/* SSP Clock Phase */
-#define SSP_CPHA_1Edge 0xFF7F
-#define SSP_CPHA_2Edge 0x0080
-
-/* SSP Data Size */
-#define SSP_DataSize_16b 0x000F
-#define SSP_DataSize_15b 0x000E
-#define SSP_DataSize_14b 0x000D
-#define SSP_DataSize_13b 0x000C
-#define SSP_DataSize_12b 0x000B
-#define SSP_DataSize_11b 0x000A
-#define SSP_DataSize_10b 0x0009
-#define SSP_DataSize_9b 0x0008
-#define SSP_DataSize_8b 0x0007
-#define SSP_DataSize_7b 0x0006
-#define SSP_DataSize_6b 0x0005
-#define SSP_DataSize_5b 0x0004
-#define SSP_DataSize_4b 0x0003
-
-/* SSP Slave output config */
-#define SSP_SlaveOutput_Enable 0xFFF7
-#define SSP_SlaveOutput_Disable 0x0008
-
-/* SSP Interrupts */
-#define SSP_IT_TxFifo 0x0008
-#define SSP_IT_RxFifo 0x0004
-#define SSP_IT_RxTimeOut 0x0002
-#define SSP_IT_RxOverrun 0x0001
-
-/* SSP Flags */
-#define SSP_FLAG_Busy 0x0024
-#define SSP_FLAG_RxFifoFull 0x0023
-#define SSP_FLAG_RxFifoNotEmpty 0x0022
-#define SSP_FLAG_TxFifoNotFull 0x0021
-#define SSP_FLAG_TxFifoEmpty 0x0020
-#define SSP_FLAG_TxFifo 0x0043
-#define SSP_FLAG_RxFifo 0x0042
-#define SSP_FLAG_RxTimeOut 0x0041
-#define SSP_FLAG_RxOverrun 0x0040
-
-/* SSP DMA Requests */
-#define SSP_DMA_Transmit 0x0002
-#define SSP_DMA_Receive 0x0001
-
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
-void SSP_DeInit(SSP_TypeDef* SSPx);
-void SSP_Init(SSP_TypeDef* SSPx, SSP_InitTypeDef* SSP_InitStruct);
-void SSP_StructInit(SSP_InitTypeDef* SSP_InitStruct);
-void SSP_Cmd(SSP_TypeDef* SSPx, FunctionalState NewState);
-void SSP_ITConfig(SSP_TypeDef* SSPx, u16 SSP_IT, FunctionalState NewState);
-void SSP_DMACmd(SSP_TypeDef* SSPx, u16 SSP_DMATransfert, FunctionalState NewState);
-void SSP_SendData(SSP_TypeDef* SSPx, u16 Data);
-u16 SSP_ReceiveData(SSP_TypeDef* SSPx);
-void SSP_LoopBackConfig(SSP_TypeDef* SSPx, FunctionalState NewState);
-FlagStatus SSP_GetFlagStatus(SSP_TypeDef* SSPx, u16 SSP_FLAG);
-void SSP_ClearFlag(SSP_TypeDef* SSPx, u16 SSP_FLAG);
-ITStatus SSP_GetITStatus(SSP_TypeDef* SSPx, u16 SSP_IT);
-void SSP_ClearITPendingBit(SSP_TypeDef* SSPx, u16 SSP_IT);
-
-#endif /* __91x_SSP_H */
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
-
diff --git a/uc_str912/prj_template91x/str91x_lib/include/91x_tim.h b/uc_str912/prj_template91x/str91x_lib/include/91x_tim.h deleted file mode 100644 index b587c27..0000000 --- a/uc_str912/prj_template91x/str91x_lib/include/91x_tim.h +++ /dev/null @@ -1,155 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_tim.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file contains all the functions prototypes for the
-* TIM software library.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
-* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __91x_TIM_H
-#define __91x_TIM_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_map.h"
-#include "91x_scu.h"
-
-/* Exported types ----------------------------------------------------------- */
-
-/* TIM Init structure define */
-typedef struct
-{
- u16 TIM_Mode; /* Timer mode */
- u16 TIM_OC1_Modes; /* Output Compare 1 Mode: Timing or Wave */
- u16 TIM_OC2_Modes; /* Output Compare 2 Mode: Timing or Wave */
- u16 TIM_Clock_Source; /* Timer Clock source APB/SCU/EXTERNAL */
- u16 TIM_Clock_Edge; /* Timer Clock Edge: Rising or Falling Edge */
- u16 TIM_OPM_INPUT_Edge; /* Timer Input Capture 1 Edge used in OPM Mode */
- u16 TIM_ICAP1_Edge; /* Timer Input Capture 1 Edge used in ICAP1 Mode */
- u16 TIM_ICAP2_Edge; /* Timer Input Capture 2 Edge used in ICAP2 Mode */
- u8 TIM_Prescaler; /* Timer Prescaler factor */
- u16 TIM_Pulse_Level_1; /* Level applied on the Output Compare Pin 1 */
- u16 TIM_Pulse_Level_2; /* Level applied on the Output Compare Pin 2 */
- u16 TIM_Period_Level; /* Level applied during the Period of a PWM Mode */
- u16 TIM_Pulse_Length_1; /* Pulse 1 Length used in Output Compare 1 Mode */
- u16 TIM_Pulse_Length_2; /* Pulse 2 Length used in Output Compare 2 Mode */
- u16 TIM_Full_Period; /* Period Length used in PWM Mode */
-} TIM_InitTypeDef;
-
-typedef enum
-{
- TIM_START,
- TIM_STOP,
- TIM_CLEAR
-} TIM_CounterOperations;
-
-/* Exported constants --------------------------------------------------------*/
-
-/* TIM MODE */
-#define TIM_PWMI 0x4000 /* PWM INPUT Mode */
-#define TIM_OCM_CHANNEL_1 0x0040 /* OUTPUT COMPARE CHANNEL 1 Mode */
-#define TIM_OCM_CHANNEL_2 0x0080 /* OUTPUT COMPARE CHANNEL 2 Mode */
-#define TIM_OCM_CHANNEL_12 0x00C0 /* OUTPUT COMPARE CHANNEL 1 & 2 Mode */
-#define TIM_PWM 0x0010 /* PWM Mode */
-#define TIM_OPM 0x0020 /* ONE PULSE Mode */
-#define TIM_ICAP_CHANNEL_1 0x0400 /* INPUT CAPTURE 1 Mode */
-#define TIM_ICAP_CHANNEL_2 0x0500 /* INPUT CAPTURE 2 Mode */
-#define TIM_ICAP_CHANNEL_12 0x0600 /* INPUT CAPTURE 1 & 2 Mode */
-
-/* TIM OUTPUT COMPARE MODE */
-#define TIM_WAVE 0x0001
-#define TIM_TIMING 0x0002
-
-/* TIM CLOCK SOURCE */
-#define TIM_CLK_APB 0xFFFE
-#define TIM_CLK_EXTERNAL 0x0001
-#define TIM_CLK_SCU 0x0001
-
-/* TIM CLOCK EDGE */
-#define TIM_CLK_EDGE_FALLING 0xFFFD
-#define TIM_CLK_EDGE_RISING 0x0002
-
-/* TIM OPM INPUT EDGE */
-#define TIM_OPM_EDGE_FALLING 0xFFFB
-#define TIM_OPM_EDGE_RISING 0x0004
-
-/* TIM ICAPA INPUT EDGE */
-#define TIM_ICAP1_EDGE_FALLING 0xFFFB
-#define TIM_ICAP1_EDGE_RISING 0x0004
-
-/* TIM ICAPB INPUT EDGE */
-#define TIM_ICAP2_EDGE_FALLING 0xFFF7
-#define TIM_ICAP2_EDGE_RISING 0x0008
-
-/* TIM OUTPUT LEVEL */
-#define TIM_HIGH 0x0200
-#define TIM_LOW 0x0300
-
-/* TIM OUTPUT EDGE */
-#define TIM_OUTPUT_EDGE_RISING 0x8000
-#define TIM_OUTPUT_EDGE_FALLING 0x0800
-
-/* TIM channels */
-#define TIM_PWM_OC1_Channel 0x1 /* PWM/Output Compare 1 Channel */
-#define TIM_OC2_Channel 0x2 /* Output Compare 2 Channel */
-
-/* TIM DMA SOURCE */
-#define TIM_DMA_IC1 0x0000 /* Input Capture Channel 1 DMA Source */
-#define TIM_DMA_OC1 0x1000 /* OUTPUT Compare Channel 1 DMA Source */
-#define TIM_DMA_IC2 0x2000 /* Input Capture Channel 2 DMA Source */
-#define TIM_DMA_OC2 0x3000 /* OUTPUT Compare Channel 2 DMA Source */
-
-/* TIM DMA ENABLE or DISABLE */
-#define TIM_DMA_ENABLE 0x0400 /* DMA Enable */
-#define TIM_DMA_DISABLE 0xFBFF /* DMA Disable */
-
-/* TIM Interruption Sources*/
-#define TIM_IT_IC1 0x8000 /* Input Capture Channel 1 Interrupt Source */
-#define TIM_IT_OC1 0x4000 /* Output Compare Channel 1 Interrupt Source */
-#define TIM_IT_TO 0x2000 /* Timer OverFlow Interrupt Source */
-#define TIM_IT_IC2 0x1000 /* Input Capture Channel 2 Interrupt Source */
-#define TIM_IT_OC2 0x0800 /* Output Compare Channel 2 Interrupt Source */
-
-/* TIM Flags */
-#define TIM_FLAG_IC1 0x8000 /* Input Capture Channel 1 Flag */
-#define TIM_FLAG_OC1 0x4000 /* Output Compare Channel 1 Flag */
-#define TIM_FLAG_TO 0x2000 /* Timer OverFlow Flag */
-#define TIM_FLAG_IC2 0x1000 /* Input Capture Channel 2 Flag */
-#define TIM_FLAG_OC2 0x0800 /* Output Compare Channel 2 Flag */
-
-/* Module private variables --------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-void TIM_Init(TIM_TypeDef *TIMx, TIM_InitTypeDef *TIM_InitStruct);
-void TIM_DeInit(TIM_TypeDef *TIMx);
-void TIM_StructInit(TIM_InitTypeDef *TIM_InitStruct);
-void TIM_CounterCmd(TIM_TypeDef *TIMx, TIM_CounterOperations TIM_operation);
-void TIM_PrescalerConfig(TIM_TypeDef *TIMx, u8 TIM_Prescaler);
-u8 TIM_GetPrescalerValue(TIM_TypeDef *TIMx);
-u16 TIM_GetCounterValue(TIM_TypeDef *TIMx);
-u16 TIM_GetICAP1Value(TIM_TypeDef *TIMx);
-u16 TIM_GetICAP2Value(TIM_TypeDef *TIMx);
-void TIM_SetPulse(TIM_TypeDef *TIMx,u16 TIM_Channel ,u16 TIM_Pulse);
-FlagStatus TIM_GetFlagStatus(TIM_TypeDef *TIMx, u16 TIM_Flag);
-void TIM_ClearFlag(TIM_TypeDef *TIMx, u16 TIM_Flag);
-u16 TIM_GetPWMIPulse(TIM_TypeDef *TIMx);
-u16 TIM_GetPWMIPeriod(TIM_TypeDef *TIMx);
-void TIM_ITConfig(TIM_TypeDef *TIMx, u16 TIM_IT, FunctionalState TIM_Newstate);
-void TIM_DMAConfig(TIM_TypeDef *TIMx, u16 TIM_DMA_Sources);
-void TIM_DMACmd(TIM_TypeDef *TIMx, FunctionalState TIM_Newstate);
-
-#endif /* __91x_TIM_H */
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/include/91x_type.h b/uc_str912/prj_template91x/str91x_lib/include/91x_type.h deleted file mode 100644 index 916d81c..0000000 --- a/uc_str912/prj_template91x/str91x_lib/include/91x_type.h +++ /dev/null @@ -1,50 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_type.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : It contains common types and constants used in all the
-* peripherals' drivers.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-**********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*********************************************************************************/
-
-#ifndef __91x_type_H
-#define __91x_type_H
-
- typedef long long u64;
- typedef unsigned long u32;
- typedef unsigned short u16;
- typedef unsigned char u8;
-
- typedef signed long s32;
- typedef signed short s16;
- typedef signed char s8;
-
- typedef volatile unsigned long vu32;
- typedef volatile unsigned short vu16;
- typedef volatile unsigned char vu8;
-
- typedef volatile signed long vs32;
- typedef volatile signed short vs16;
- typedef volatile signed char vs8;
-
-typedef enum { FALSE = 0, TRUE = !FALSE } bool;
-
-typedef enum { RESET = 0, SET = !RESET } FlagStatus, ITStatus;
-
-typedef enum { DISABLE = 0, ENABLE = !DISABLE} FunctionalState;
-
-typedef enum { ERROR = 0, SUCCESS = !ERROR} ErrorStatus;
-
-#endif /* __91x_type_H */
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/include/91x_uart.h b/uc_str912/prj_template91x/str91x_lib/include/91x_uart.h deleted file mode 100644 index b979438..0000000 --- a/uc_str912/prj_template91x/str91x_lib/include/91x_uart.h +++ /dev/null @@ -1,174 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_uart.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file contains all the functions prototypes for the
-* UART software library.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __91x_UART_H
-#define __91x_UART_H
-
-/* Includes ------------------------------------------------------------------*/
-#include <91x_map.h>
-
-/* Exported types ------------------------------------------------------------*/
-/* UART FIFO Level enumeration */
-typedef enum
-{
- UART_FIFOLevel_1_8 = 0x0000, /* FIFO size 16 bytes, FIFO level 2 bytes */
- UART_FIFOLevel_1_4 = 0x0001, /* FIFO size 16 bytes, FIFO level 4 bytes */
- UART_FIFOLevel_1_2 = 0x0002, /* FIFO size 16 bytes, FIFO level 8 bytes */
- UART_FIFOLevel_3_4 = 0x0003, /* FIFO size 16 bytes, FIFO level 12 bytes */
- UART_FIFOLevel_7_8 = 0x0004 /* FIFO size 16 bytes, FIFO level 14 bytes */
-}UART_FIFOLevel;
-
-/* UART Init Structure definition */
-typedef struct
-{
- u16 UART_WordLength;
- u16 UART_StopBits;
- u16 UART_Parity;
- u32 UART_BaudRate;
- u16 UART_HardwareFlowControl;
- u16 UART_Mode;
- u16 UART_FIFO;
- UART_FIFOLevel UART_TxFIFOLevel;
- UART_FIFOLevel UART_RxFIFOLevel;
-}UART_InitTypeDef;
-
-
-/* UART RTS enumeration */
-typedef enum
-{
- LowLevel = 0,
- HighLevel
-}UART_LevelTypeDef;
-
-/* Exported constants --------------------------------------------------------*/
-/* UART Data Length */
-#define UART_WordLength_5D 0x0000 /* 5 bits Data */
-#define UART_WordLength_6D 0x0020 /* 6 bits Data */
-#define UART_WordLength_7D 0x0040 /* 7 bits Data */
-#define UART_WordLength_8D 0x0060 /* 8 bits Data */
-
-/* UART Stop Bits */
-#define UART_StopBits_1 0xFFF7 /* Disable two stop bit is transmitted
- at the end of frame */
-#define UART_StopBits_2 0x0008 /* Enable Two stop bits are transmitted
- at the end of frame */
-/* UART Parity */
-#define UART_Parity_No 0x0000 /* Parity Disable */
-#define UART_Parity_Even 0x0006 /* Even Parity */
-#define UART_Parity_Odd 0x0002 /* Odd Parity */
-#define UART_Parity_OddStick 0x0082 /* 1 is transmitted as bit parity */
-#define UART_Parity_EvenStick 0x0086 /* 0 is transmitted as bit parity */
-
-/* UART Hardware Flow Control */
-#define UART_HardwareFlowControl_None 0x0000 /* HFC Disable */
-#define UART_HardwareFlowControl_RTS 0x4000 /* RTS Enable */
-#define UART_HardwareFlowControl_CTS 0x8000 /* CTS Enable */
-#define UART_HardwareFlowControl_RTS_CTS 0xC000 /* CTS and RTS Enable */
-
-/* UART Mode */
-#define UART_Mode_Rx 0x0200 /* UART Rx Enabled */
-#define UART_Mode_Tx 0x0100 /* UART Tx Enbled */
-#define UART_Mode_Tx_Rx 0x0300 /* UART Tx and Rx Enabled */
-
-/* UART FIFO */
-#define UART_FIFO_Disable 0xFFEF /* FIFOs Disable */
-#define UART_FIFO_Enable 0x0010 /* FIFOs Enable */
-
-/* UART Interrupt definition */
-#define UART_IT_OverrunError 0x0400 /* Overrun Error interrupt mask */
-#define UART_IT_BreakError 0x0200 /* Break Error interrupt mask */
-#define UART_IT_ParityError 0x0100 /* Parity Error interrupt mask */
-#define UART_IT_FrameError 0x0080 /* Frame Error interrupt mask */
-#define UART_IT_ReceiveTimeOut 0x0040 /* Receive Time Out interrupt mask */
-#define UART_IT_Transmit 0x0020 /* Transmit interrupt mask */
-#define UART_IT_Receive 0x0010 /* Receive interrupt mask */
-#define UART_IT_DSR 0x0008 /* DSR interrupt mask */
-#define UART_IT_DCD 0x0004 /* DCD interrupt mask */
-#define UART_IT_CTS 0x0002 /* CTS interrupt mask */
-#define UART_IT_RI 0x0001 /* RI interrupt mask */
-
-/* UART DMA On Error */
-#define UART_DMAOnError_Enable 0xFFFB /* DMA receive request enabled
- when the UART error interrupt
- is asserted. */
-#define UART_DMAOnError_Disable 0x0004 /* DMA receive request disabled
- when the UART error interrupt
- is asserted. */
-/* UART DMA Request */
-#define UART_DMAReq_Tx 0x02 /* Transmit DMA Enable */
-#define UART_DMAReq_Rx 0x01 /* Receive DMA Enable */
-
-/* UART FLAG */
-#define UART_FLAG_OverrunError 0x23 /* Overrun error flag */
-#define UART_FLAG_Break 0x22 /* break error flag */
-#define UART_FLAG_ParityError 0x21 /* parity error flag */
-#define UART_FLAG_FrameError 0x20 /* frame error flag */
-#define UART_FLAG_RI 0x48 /* RI flag */
-#define UART_FLAG_TxFIFOEmpty 0x47 /* Transmit FIFO Empty flag */
-#define UART_FLAG_RxFIFOFull 0x46 /* Receive FIFO Full flag */
-#define UART_FLAG_TxFIFOFull 0x45 /* Transmit FIFO Full flag */
-#define UART_FLAG_RxFIFOEmpty 0x44 /* Receive FIFO Empty flag */
-#define UART_FLAG_Busy 0x43 /* UART Busy flag */
-#define UART_FLAG_DCD 0x42 /* DCD flag */
-#define UART_FLAG_DSR 0x41 /* DSR flag */
-#define UART_FLAG_CTS 0x40 /* CTS flag */
-#define UART_RawIT_OverrunError 0x6A /* Overrun Error Raw IT flag */
-#define UART_RawIT_BreakError 0x69 /* Break Error Raw IT flag */
-#define UART_RawIT_ParityError 0x68 /* Parity Error Raw IT flag */
-#define UART_RawIT_FrameError 0x67 /* Frame Error Raw IT flag */
-#define UART_RawIT_ReceiveTimeOut 0x66 /* ReceiveTimeOut Raw IT flag */
-#define UART_RawIT_Transmit 0x65 /* Transmit Raw IT flag */
-#define UART_RawIT_Receive 0x64 /* Receive Raw IT flag */
-#define UART_RawIT_DSR 0x63 /* DSR Raw IT flag */
-#define UART_RawIT_DCD 0x62 /* DCD Raw IT flag */
-#define UART_RawIT_CTS 0x61 /* CTS Raw IT flag */
-#define UART_RawIT_RI 0x60 /* RI Raw IT flag */
-
-/*IrDAx select*/
-#define IrDA0 0x01 /*IrDA0 select*/
-#define IrDA1 0x02 /*IrDA0 select*/
-#define IrDA2 0x03 /*IrDA0 select*/
-
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-void UART_DeInit(UART_TypeDef* UARTx);
-void UART_Init(UART_TypeDef* UARTx, UART_InitTypeDef* UART_InitStruct);
-void UART_StructInit(UART_InitTypeDef* UART_InitStruct);
-void UART_Cmd(UART_TypeDef* UARTx, FunctionalState NewState);
-void UART_ITConfig(UART_TypeDef* UARTx, u16 UART_IT, FunctionalState NewState);
-void UART_DMAConfig(UART_TypeDef* UARTx, u16 UART_DMAOnError);
-void UART_DMACmd(UART_TypeDef* UARTx, u8 UART_DMAReq, FunctionalState NewState);
-void UART_LoopBackConfig(UART_TypeDef* UARTx, FunctionalState NewState);
-FlagStatus UART_GetFlagStatus(UART_TypeDef* UARTx, u16 UART_FLAG);
-void UART_ClearFlag(UART_TypeDef* UARTx);
-void UART_ClearITPendingBit(UART_TypeDef* UARTx, u16 UART_IT);
-void UART_IrDALowPowerConfig(u8 IrDAx, FunctionalState NewState);
-void UART_IrDACmd(u8 IrDAx, FunctionalState NewState);
-void UART_IrDASetCounter(u8 IrDAx, u32 IrDA_Counter);
-void UART_SendData(UART_TypeDef* UARTx, u8 Data);
-u8 UART_ReceiveData(UART_TypeDef* UARTx);
-void UART_SendBreak(UART_TypeDef* UARTx);
-void UART_DTRConfig(UART_LevelTypeDef LevelState);
-void UART_RTSConfig(UART_LevelTypeDef LevelState);
-ITStatus UART_GetITStatus(UART_TypeDef* UARTx, u16 UART_IT);
-
-#endif /* __91x_UART_H */
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/include/91x_vic.h b/uc_str912/prj_template91x/str91x_lib/include/91x_vic.h deleted file mode 100644 index 127716a..0000000 --- a/uc_str912/prj_template91x/str91x_lib/include/91x_vic.h +++ /dev/null @@ -1,94 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_vic.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file contains all the functions prototypes for the
-* VIC software library.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
-* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-
-/* Define to prevent recursive inclusion ------------------------------------ */
-#ifndef __91x_VIC_H
-#define __91x_VIC_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_map.h"
-#include "91x_it.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* Type of interrupt */
-typedef enum
-{
- VIC_IRQ,
- VIC_FIQ
-} VIC_ITLineMode;
-
-/* Exported constants --------------------------------------------------------*/
-
-/* VIC sources*/
-
-#define WDG_ITLine 0
-#define SW_ITLine 1
-#define ARMRX_ITLine 2
-#define ARMTX_ITLine 3
-#define TIM0_ITLine 4
-#define TIM1_ITLine 5
-#define TIM2_ITLine 6
-#define TIM3_ITLine 7
-#define USBHP_ITLine 8
-#define USBLP_ITLine 9
-#define SCU_ITLine 10
-#define ENET_ITLine 11
-#define DMA_ITLine 12
-#define CAN_ITLine 13
-#define MC_ITLine 14
-#define ADC_ITLine 15
-#define UART0_ITLine 16
-#define UART1_ITLine 17
-#define UART2_ITLine 18
-#define I2C0_ITLine 19
-#define I2C1_ITLine 20
-#define SSP0_ITLine 21
-#define SSP1_ITLine 22
-#define LVD_ITLine 23
-#define RTC_ITLine 24
-#define WIU_ITLine 25
-#define EXTIT0_ITLine 26
-#define EXTIT1_ITLine 27
-#define EXTIT2_ITLine 28
-#define EXTIT3_ITLine 29
-#define USBWU_ITLine 30
-#define PFQBC_ITLine 31
-
-
-/* Module private variables --------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
-void VIC_DeInit(void);
-FlagStatus VIC_GetIRQStatus(u16 VIC_Source);
-FlagStatus VIC_GetFIQStatus(u16 VIC_Source);
-FlagStatus VIC_GetSourceITStatus(u16 VIC_Source);
-void VIC_ITCmd(u16 VIC_Source, FunctionalState VIC_NewState);
-void VIC_SWITCmd(u16 VIC_Source, FunctionalState VIC_NewState);
-void VIC_ProtectionCmd(FunctionalState VIC_NewState);
-u32 VIC_GetCurrentISRAdd(VIC_TypeDef* VICx);
-u32 VIC_GetISRVectAdd(u16 VIC_Source);
-void VIC_Config(u16 VIC_Source, VIC_ITLineMode VIC_LineMode, u8 VIC_Priority);
-
-#endif /* __91x_VIC_H */
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
-
diff --git a/uc_str912/prj_template91x/str91x_lib/include/91x_wdg.h b/uc_str912/prj_template91x/str91x_lib/include/91x_wdg.h deleted file mode 100644 index fc70547..0000000 --- a/uc_str912/prj_template91x/str91x_lib/include/91x_wdg.h +++ /dev/null @@ -1,82 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_wdg.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file contains all the functions prototypes for the
-* WDG software library.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __91x_WDG_H
-#define __91x_WDG_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_map.h"
-
-/* Exported types ------------------------------------------------------------*/
-typedef struct
-{
-u16 WDG_Mode;
-u16 WDG_ClockSource;
-u16 WDG_Prescaler;
-u16 WDG_Preload;
-
-} WDG_InitTypeDef;
-
-/* Exported constants --------------------------------------------------------*/
-
-/* WDG_Mode */
-#define WDG_Mode_Wdg 0x0001 /*WDG configured to run in watchdog mode.*/
-#define WDG_Mode_Timer 0xFFFE /*WDG configured to be in Free-running Timer mode.*/
-
-
-/* WDG_ClockSource */
-#define WDG_ClockSource_Rtc 0x0004 /* External clock ( 32 khz RTC clock ) will be used as counting clock.*/
-#define WDG_ClockSource_Apb 0xFFFB /*The APB clock signal will be used as counting clock.*/
-
-/* WDG_Prescaler */
-/*This member must be a number between 0x00 and 0xFF.
-Specifies the Prescaler value to divide the clock source.
-The clock of the Watchdog Timer Counter is divided by " WDG_Prescaler + 1".*/
-
-
-
-/* WDG_Preload */
-/*This member must be a number between 0x0000 and 0xFFFF.
-This value is loaded in the WDG Counter when it starts counting.*/
-
-
-/* WDG Sequence */
-#define WDG_KeyValue1 0xA55A
-#define WDG_KeyValue2 0x5AA5
-
-/* Exported macro ------------------------------------------------------------*/
-
-
-/* Exported functions ------------------------------------------------------- */
-
-void WDG_DeInit(void);
-void WDG_Init(WDG_InitTypeDef* WDG_InitStruct);
-void WDG_StructInit(WDG_InitTypeDef* WDG_InitStruct);
-void WDG_Cmd(FunctionalState NewState);
-void WDG_ITConfig(FunctionalState NewState);
-u16 WDG_GetCounter(void);
-FlagStatus WDG_GetFlagStatus(void);
-void WDG_ClearFlag(void);
-ITStatus WDG_GetITStatus(void);
-void WDG_ClearITPendingBit(void);
-
-#endif /* __WDG_H */
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/include/91x_wiu.h b/uc_str912/prj_template91x/str91x_lib/include/91x_wiu.h deleted file mode 100644 index 8b0349c..0000000 --- a/uc_str912/prj_template91x/str91x_lib/include/91x_wiu.h +++ /dev/null @@ -1,99 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_wiu.h
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file contains all the functions prototypes for the
-* WIU software library.
-**********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-**********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*********************************************************************************/
-
-/* Define to prevent recursive inclusion ------------------------------------ */
-#ifndef __91x_WIU_H
-#define __91x_WIU_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_map.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* WIU Init structure type define */
-typedef struct
-{
- u8 WIU_Mode ;
- u8 WIU_TriggerEdge;
- u32 WIU_Line ;
-}WIU_InitTypeDef ;
-
-/* Exported constants --------------------------------------------------------*/
-/* Wake-up line triggering edge */
-#define WIU_FallingEdge 0x00
-#define WIU_RisingEdge 0x01
-
-/* Wake-up unit modes */
-#define WIU_Mode_WakeUp 0x01
-#define WIU_Mode_Interrupt 0x02
-#define WIU_Mode_WakeUpInterrupt 0x03
-#define WIU_Mode_SWInterrupt 0x04
-
-/* Wake-up lines*/
-#define WIU_Line0 0x0001
-#define WIU_Line1 (WIU_Line0<<1)
-#define WIU_Line2 (WIU_Line1<<1)
-#define WIU_Line3 (WIU_Line2<<1)
-#define WIU_Line4 (WIU_Line3<<1)
-#define WIU_Line5 (WIU_Line4<<1)
-#define WIU_Line6 (WIU_Line5<<1)
-#define WIU_Line7 (WIU_Line6<<1)
-#define WIU_Line8 (WIU_Line7<<1)
-#define WIU_Line9 (WIU_Line8<<1)
-#define WIU_Line10 (WIU_Line9<<1)
-#define WIU_Line11 (WIU_Line10<<1)
-#define WIU_Line12 (WIU_Line11<<1)
-#define WIU_Line13 (WIU_Line12<<1)
-#define WIU_Line14 (WIU_Line13<<1)
-#define WIU_Line15 (WIU_Line14<<1)
-#define WIU_Line16 (WIU_Line15<<1)
-#define WIU_Line17 (WIU_Line16<<1)
-#define WIU_Line18 (WIU_Line17<<1)
-#define WIU_Line19 (WIU_Line18<<1)
-#define WIU_Line20 (WIU_Line19<<1)
-#define WIU_Line21 (WIU_Line20<<1)
-#define WIU_Line22 (WIU_Line21<<1)
-#define WIU_Line23 (WIU_Line22<<1)
-#define WIU_Line24 (WIU_Line23<<1)
-#define WIU_Line25 (WIU_Line24<<1)
-#define WIU_Line26 (WIU_Line25<<1)
-#define WIU_Line27 (WIU_Line26<<1)
-#define WIU_Line28 (WIU_Line27<<1)
-#define WIU_Line29 (WIU_Line28<<1)
-#define WIU_Line30 (WIU_Line29<<1)
-#define WIU_Line31 (WIU_Line30<<1)
-
-/* Exported constants --------------------------------------------------------*/
-/* Module private variables --------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
-void WIU_DeInit(void);
-void WIU_StructInit(WIU_InitTypeDef* WIU_InitStruct);
-void WIU_Init(WIU_InitTypeDef* WIU_InitStruct);
-void WIU_GenerateSWInterrupt(u32 WIU_Line);
-FlagStatus WIU_GetFlagStatus(u32 WIU_Line);
-void WIU_ClearFlag(u32 WIU_Line);
-ITStatus WIU_GetITStatus(u32 WIU_Line);
-void WIU_ClearITPendingBit(u32 WIU_Line);
-
-#endif /* __91x_WIU_H */
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
-
diff --git a/uc_str912/prj_template91x/str91x_lib/src/91x_adc.c b/uc_str912/prj_template91x/str91x_lib/src/91x_adc.c deleted file mode 100644 index a6a07d3..0000000 --- a/uc_str912/prj_template91x/str91x_lib/src/91x_adc.c +++ /dev/null @@ -1,590 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_adc.c
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file provides all the ADC software functions.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
-* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-
-/* Standard include ----------------------------------------------------------*/
-#include "91x_adc.h"
-#include "91x_scu.h"
-/* Include of other module interface headers ---------------------------------*/
-/* Local includes ------------------------------------------------------------*/
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-
-/* ADC mask */
-#define ADC_FLAG_MASK 0x001F /* ADC Flag Mask */
-#define ADC_RESULT_MASK 0x03FF /* ADC Result Mask */
-#define ADC_SCAN_MODE_MASK 0x0020 /* ADC Sacn Mode Mask */
-#define ADC_STANDBY_MODE_MASK 0x0008 /* ADC Standby Mode Mask */
-#define ADC_CMD_MASK 0x0002 /* ADC Command Mask */
-#define ADC_CHANNEL_MASK 0xFE3F /* ADC Channel Select Mask */
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Interface functions -------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/*******************************************************************************
-* Function Name : ADC_DeInit
-* Description : Deinitialize the ADC module registers to their default reset
-* values
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void ADC_DeInit(void)
-{
- /* Reset the ADC registers values */
- SCU_APBPeriphReset(__ADC,ENABLE);
- SCU_APBPeriphReset(__ADC,DISABLE);
-}
-
-/*******************************************************************************
-* Function Name : ADC_Init
-* Description : Initializes ADC peripheral according to the specified
-* parameters in the ADC_InitTypeDef structure.
-* Input : ADC_InitStruct: pointer to a ADC_InitTypeDef structure that
-* contains the configuration information for the specified
-* ADC peripheral.
-* Output : None
-* Return : None
-*******************************************************************************/
-void ADC_Init(ADC_InitTypeDef* ADC_InitStruct)
-{
- /* Set the low threshold of the watchdog */
- ADC->LTR = ADC_InitStruct->ADC_WDG_Low_Threshold;
-
- /* Set the high threshold of the watchdog */
- ADC->HTR = ADC_InitStruct->ADC_WDG_High_Threshold;
-
-
- /* Channel 0 conversion mode */
- ADC->CCR &= 0xFFFC;
- ADC->CCR |= ADC_InitStruct->ADC_Channel_0_Mode;
-
- /* Channel 1 conversion mode */
- ADC->CCR &= 0xFFF3;
- ADC->CCR |= ADC_InitStruct->ADC_Channel_1_Mode << 0x2;
-
- /* Channel 2 conversion mode */
- ADC->CCR &= 0xFFCF;
- ADC->CCR |= ADC_InitStruct->ADC_Channel_2_Mode << 0x4;
-
- /* Channel 3 conversion mode */
- ADC->CCR &= 0xFF3F;
- ADC->CCR |= ADC_InitStruct->ADC_Channel_3_Mode << 0x6;
-
- /* Channel 4 conversion mode */
- ADC->CCR &= 0xFCFF;
- ADC->CCR |= ADC_InitStruct->ADC_Channel_4_Mode << 0x8;
-
- /* Channel 5 conversion mode */
- ADC->CCR &= 0xF3FF;
- ADC->CCR |= ADC_InitStruct->ADC_Channel_5_Mode << 0xA;
-
- /* Channel 6 conversion mode */
- ADC->CCR &= 0xCFFF;
- ADC->CCR |= ADC_InitStruct->ADC_Channel_6_Mode << 0xC;
-
- /* Channel 7 conversion mode */
- ADC->CCR &= 0x3FFF;
- ADC->CCR |= ADC_InitStruct->ADC_Channel_7_Mode << 0xE;
-
- /* Select the channel to be converted */
- ADC->CR &= ADC_CHANNEL_MASK;
- ADC->CR |= ADC_InitStruct->ADC_Select_Channel << 0x6;
-
- /* Enable/disable the scan mode */
- if (ADC_InitStruct->ADC_Scan_Mode == ENABLE)
- {
- /* Enable the scan mode */
- ADC->CR |= ADC_SCAN_MODE_MASK;
- }
- else
- {
- /* Disable the scan mode */
- ADC->CR &= ~ADC_SCAN_MODE_MASK;
- }
-
- /* Configure the conversion mode */
- if (ADC_InitStruct->ADC_Conversion_Mode == ADC_Continuous_Mode)
- {
- /* ADC continuous mode */
- ADC->CR |= ADC_Continuous_Mode;
- }
- else
- {
- /* ADC single mode */
- ADC->CR &= ADC_Single_Mode;
- }
-}
-
-/*******************************************************************************
-* Function Name : ADC_StructInit
-* Description : Fills each ADC_InitStruct member with its reset value.
-* Input : ADC_InitStruct : pointer to a ADC_InitTypeDef structure
-* which will be initialized.
-* Output : None
-* Return : None.
-*******************************************************************************/
-void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct)
-{
- ADC_InitStruct->ADC_WDG_High_Threshold = 0x0000;
- ADC_InitStruct->ADC_WDG_Low_Threshold = 0x0000;
- ADC_InitStruct->ADC_Channel_0_Mode = ADC_No_Conversion;
- ADC_InitStruct->ADC_Channel_1_Mode = ADC_No_Conversion;
- ADC_InitStruct->ADC_Channel_2_Mode = ADC_No_Conversion;
- ADC_InitStruct->ADC_Channel_3_Mode = ADC_No_Conversion;
- ADC_InitStruct->ADC_Channel_4_Mode = ADC_No_Conversion;
- ADC_InitStruct->ADC_Channel_5_Mode = ADC_No_Conversion;
- ADC_InitStruct->ADC_Channel_6_Mode = ADC_No_Conversion;
- ADC_InitStruct->ADC_Channel_7_Mode = ADC_No_Conversion;
- ADC_InitStruct->ADC_Select_Channel = ADC_Channel_0;
- ADC_InitStruct->ADC_Scan_Mode = DISABLE;
- ADC_InitStruct->ADC_Conversion_Mode = ADC_Single_Mode;
-}
-
-/*******************************************************************************
-* Function Name : ADC_PrescalerConfig
-* Description : This routine is used to configure the ADC prescaler value.
-* Input : ADC_Prescaler: specifies the prescaler value. This parameter
-* can be a value from 0x0 to 0xFF.
-* Output : None
-* Return : None
-*******************************************************************************/
-void ADC_PrescalerConfig(u8 ADC_Prescaler)
-{
- ADC->PRS &= 0xFF00;
- ADC->PRS |= ADC_Prescaler;
-
-}
-/*******************************************************************************
-* Function Name : ADC_GetPrescalerValue
-* Description : This routine is used to get the ADC prescaler value.
-* Input : None
-* Output : None
-* Return : The prescaler value.
-*******************************************************************************/
-u8 ADC_GetPrescalerValue(void)
-{
- return ADC->PRS & 0x00FF;
-}
-/*******************************************************************************
-* Function Name : ADC_GetFlagStatus
-* Description : Checks whether the specified ADC flag is set or not.
-* Input : ADC_Flag: flag to check.
-* This parameter can be one of the following values:
-* - ADC_FLAG_OV_CH_0: Conversion overflow status for
-* channel 0.
-* - ADC_FLAG_OV_CH_1: Conversion overflow status for
-* channel 1.
-* - ADC_FLAG_OV_CH_2: Conversion overflow status for
-* channel 2.
-* - ADC_FLAG_OV_CH_3: Conversion overflow status for
-* channel 3.
-* - ADC_FLAG_OV_CH_4: Conversion overflow status for
-* channel 4.
-* - ADC_FLAG_OV_CH_5: Conversion overflow status for
-* channel 5.
-* - ADC_FLAG_OV_CH_6: Conversion overflow status for
-* channel 6.
-* - ADC_FLAG_OV_CH_7: Conversion overflow status for
-* channel 7.
-* - ADC_FLAG_ECV: End of conversion status.
-* - ADC_FLAG_AWD: Analog watchdog status.
-* Output : None
-* Return : The NewState of the ADC_Flag (SET or RESET).
-*******************************************************************************/
-FlagStatus ADC_GetFlagStatus(u16 ADC_Flag)
-{
- u8 AdcReg = 0, FlagPos = 0;
-
- /* Get the ADC register index */
- AdcReg = ADC_Flag >> 5;
-
- /* Get the flag position */
- FlagPos = ADC_Flag & ADC_FLAG_MASK;
-
- if(AdcReg == 1) /* The flag to check is in CR register */
- {
- if((ADC->CR & (1<<FlagPos))!= RESET)
- {
- return SET;
- }
- else
- {
- return RESET;
- }
- }
- else if(AdcReg == 6) /* The flag to check is in DR0 register */
- {
- if((ADC->DR0 & (1<<FlagPos))!= RESET)
- {
- return SET;
- }
- else
- {
- return RESET;
- }
- }
- else if(AdcReg == 7) /* The flag to check is in DR1 register */
- {
- if((ADC->DR1 & (1<<FlagPos))!= RESET)
- {
- return SET;
- }
- else
- {
- return RESET;
- }
- }
- else if(AdcReg == 8) /* The flag to check is in DR2 register */
- {
- if((ADC->DR2 & (1<<FlagPos))!= RESET)
- {
- return SET;
- }
- else
- {
- return RESET;
- }
- }
- else if(AdcReg == 9) /* The flag to check is in DR3 register */
- {
- if((ADC->DR3 & (1<<FlagPos))!= RESET)
- {
- return SET;
- }
- else
- {
- return RESET;
- }
- }
-
- else if(AdcReg == 0xA) /* The flag to check is in DR4 register */
- {
- if((ADC->DR4 & (1<<FlagPos))!= RESET)
- {
- return SET;
- }
- else
- {
- return RESET;
- }
- }
- else if(AdcReg == 0xB) /* The flag to check is in DR5 register */
- {
- if((ADC->DR5 & (1<<FlagPos))!= RESET)
- {
- return SET;
- }
- else
- {
- return RESET;
- }
- }
- else if(AdcReg == 0xC) /* The flag to check is in DR6 register */
- {
- if((ADC->DR6 & (1<<FlagPos))!= RESET)
- {
- return SET;
- }
- else
- {
- return RESET;
- }
- }
- else /* (AdcReg == 0xD), The flag to check is in DR7 register */
- {
- if((ADC->DR7 & (1<<FlagPos))!= RESET)
- {
- return SET;
- }
- else
- {
- return RESET;
- }
- }
-}
-
-/*******************************************************************************
-* Function Name : ADC_ClearFlag
-* Description : Clears the ADC Flag passed as a parameter.
-* Input : ADC_Flag: flag to clear.
-* This parameter can be one of the following values:
-* - ADC_FLAG_ECV: End of conversion status.
-* - ADC_FLAG_AWD: Analog watchdog status.
-* Output : None
-* Return : None
-*******************************************************************************/
-void ADC_ClearFlag(u16 ADC_Flag)
-{
- /* Clear the correspondent flag */
- ADC->CR |= (1<<(ADC_Flag & ADC_FLAG_MASK));
-}
-
-/*******************************************************************************
-* Function Name : ADC_GetConversionValue
-* Description : Read the result of conversion from the appropriate data
-* register.
-* Input : ADC_Channel: the correspondent channel of the ADC peripheral.
-* This parameter can be one of the following values:
-* - ADC_Channel_0: ADC channel 0.
-* - ADC_Channel_1: ADC channel 1.
-* - ADC_Channel_2: ADC channel 2.
-* - ADC_Channel_3: ADC channel 3.
-* - ADC_Channel_4: ADC channel 4.
-* - ADC_Channel_5: ADC channel 5.
-* - ADC_Channel_6: ADC channel 6.
-* - ADC_Channel_7: ADC channel 7.
-* Output : None
-* Return : The result of the conversion for the specific channel.
-*******************************************************************************/
-u16 ADC_GetConversionValue(u16 ADC_Channel)
-{
- u16 ADC_Conversion_Value = 0;
-
- switch (ADC_Channel)
- {
- case (ADC_Channel_0):
- /* Get the conversion value of the channel 0 */
- ADC_Conversion_Value = ADC->DR0 & ADC_RESULT_MASK;
- break;
-
- case (ADC_Channel_1):
- /* Get the conversion value of the channel 1 */
- ADC_Conversion_Value = ADC->DR1 & ADC_RESULT_MASK;
- break;
-
- case (ADC_Channel_2):
- /* Get the conversion value of the channel 2 */
- ADC_Conversion_Value = ADC->DR2 & ADC_RESULT_MASK;
- break;
-
- case (ADC_Channel_3):
- /* Get the conversion value of the channel 3 */
- ADC_Conversion_Value = ADC->DR3 & ADC_RESULT_MASK;
- break;
-
- case (ADC_Channel_4):
- /* Get the conversion value of the channel 4 */
- ADC_Conversion_Value = ADC->DR4 & ADC_RESULT_MASK;
- break;
-
- case (ADC_Channel_5):
- /* Get the conversion value of the channel 5 */
- ADC_Conversion_Value = ADC->DR5 & ADC_RESULT_MASK;
- break;
-
- case (ADC_Channel_6):
- /* Get the conversion value of the channel 6 */
- ADC_Conversion_Value = ADC->DR6 & ADC_RESULT_MASK;
- break;
-
- case (ADC_Channel_7):
- /* Get the conversion value of the channel 7 */
- ADC_Conversion_Value = ADC->DR7 & ADC_RESULT_MASK;
- break;
-
- default:
- break;
- }
-
- return(ADC_Conversion_Value);
-}
-
-/*******************************************************************************
-* Function Name : ADC_GetAnalogWatchdogResult
-* Description : Return the result of the comparaison on the selected Analog
-* Watchdog.
-* Input : ADC_Channel: the correspondent channel of the ADC peripheral.
-* This parameter can be one of the following values:
-* - ADC_Channel_0: ADC channel 0.
-* - ADC_Channel_1: ADC channel 1.
-* - ADC_Channel_2: ADC channel 2.
-* - ADC_Channel_3: ADC channel 3.
-* - ADC_Channel_4: ADC channel 4.
-* - ADC_Channel_5: ADC channel 5.
-* - ADC_Channel_6: ADC channel 6.
-* - ADC_Channel_7: ADC channel 7.
-* Output : None
-* Return : The state of the comparision (SET or RESET).
-*******************************************************************************/
-FlagStatus ADC_GetAnalogWatchdogResult(u16 ADC_Channel)
-{
- if (ADC->CRR & (1<<ADC_Channel) != RESET)
- {
- return SET;
- }
- else
- {
- return RESET;
- }
-}
-
-/*******************************************************************************
-* Function Name : ADC_ClearAnalogWatchdogResult
-* Description : Clear the result of the comparaison on the selected Analog
-* Watchdog.
-* Input : ADC_Channel: the correspondent channel of the ADC peripheral.
-* This parameter can be one of the following values:
-* - ADC_Channel_0: ADC channel 0.
-* - ADC_Channel_1: ADC channel 1.
-* - ADC_Channel_2: ADC channel 2.
-* - ADC_Channel_3: ADC channel 3.
-* - ADC_Channel_4: ADC channel 4.
-* - ADC_Channel_5: ADC channel 5.
-* - ADC_Channel_6: ADC channel 6.
-* - ADC_Channel_7: ADC channel 7.
-* Output : None
-* Return : None
-*******************************************************************************/
-void ADC_ClearAnalogWatchdogResult(u16 ADC_Channel)
-{
- /* Clear the correspondent watchdog result */
- ADC->CRR = 1<<ADC_Channel;
-}
-
-/*******************************************************************************
-* Function Name : ADC_GetWatchdogThreshold
-* Description : Get the higher/lower thresholds values of the watchdog.
-* Input : ADC_Threshold: the lower or the higher threshold.
-* This parameter can be one of the following values:
-* - ADC_HigherThreshold: The higher threshold.
-* - ADC_LowerThreshold: The lower threshold.
-* Output : None
-* Return : The selected threshold value.
-*******************************************************************************/
-u16 ADC_GetWatchdogThreshold(ADC_ThresholdType ADC_Threshold)
-{
- u16 ADC_Threshold_Value = 0;
-
- switch (ADC_Threshold)
- {
- case ADC_LowThreshold:
- /* Get the low threshold of the watchdog */
- ADC_Threshold_Value = ADC->LTR;
- break;
-
- case ADC_HighThreshold:
- /* Get the high threshol of the watchdog */
- ADC_Threshold_Value = ADC->HTR;
- break;
-
- default:
- break;
- }
-
- return(ADC_Threshold_Value);
-}
-
-/*******************************************************************************
-* Function Name : ADC_ITConfig
-* Description : Enables or disables the specified ADC interrupts.
-* Input : - ADC_IT: specifies the ADC interrupts sources to be enabled
-* or disabled.
-* This parameter can be one of the following values:
-* - ADC_IT_EndOfConversion: End of conversion interrupt.
-* - ADC_IT_AnalogWDG: Analog watchdog interrupt.
-* - ADC_NewState: new state of the specified ADC interrupts.
-* (ADC_Newstate can be ENABLE or DISABLE).
-* Output : None
-* Return : None
-*******************************************************************************/
-void ADC_ITConfig(u16 ADC_IT, FunctionalState ADC_NewState)
-{
- if (ADC_NewState == ENABLE)
- {
- /* Enable the interrupt */
- ADC->CR |= ADC_IT;
- }
- else
- {
- /* Disable the interrupt */
- ADC->CR &= ~ADC_IT;
- }
-}
-
-/*******************************************************************************
-* Function Name : ADC_StandbyModeCmd
-* Description : Enable or disable the standby mode.
-* Input : ADC_NewState: new state of the ADC standby mode.
-* (ADC_Newstate can be ENABLE or DISABLE).
-* Output : None
-* Return : None
-*******************************************************************************/
-void ADC_StandbyModeCmd(FunctionalState ADC_NewState)
-{
- if (ADC_NewState == ENABLE)
- {
- /* Enable the standby mode */
- ADC->CR |= ADC_STANDBY_MODE_MASK;
- }
- else
- {
- /* Disable the standby mode */
- ADC->CR &= ~ADC_STANDBY_MODE_MASK;
- }
-}
-
-/*******************************************************************************
-* Function Name : ADC_Cmd
-* Description : Power on or put in reset mode the ADC peripheral.
-* Input : ADC_NewState: new state of the ADC peripheral.
-* (ADC_Newstate can be ENABLE or DISABLE).
-* Output : None
-* Return : None
-*******************************************************************************/
-void ADC_Cmd(FunctionalState ADC_NewState)
-{
- if (ADC_NewState == ENABLE)
- {
- /* Enable the ADC */
- ADC->CR |= ADC_CMD_MASK;
- }
- else
- {
- /* Disable the ADC */
- ADC->CR &= ~ADC_CMD_MASK;
- }
-}
-
-/*******************************************************************************
-* Function Name : ADC_ConversionCmd
-* Description : Start or stop the ADC conversion in the selected mode.
-* Input : ADC_Conversion: the conversion command.
-* This parameter can be one of the following values:
-* - ADC_Conversion_Start: Start the conversion.
-* - ADC_Conversion_Stop: Stop the Conversion.
-* Output : None
-* Return : None
-*******************************************************************************/
-void ADC_ConversionCmd(u16 ADC_Conversion)
-{
- if (ADC_Conversion == ADC_Conversion_Start)
- {
- /* Start the ADC conversion */
- ADC->CR |= ADC_Conversion_Start;
- }
- else
- {
- /* Stop the ADC conversion */
- ADC->CR &= ADC_Conversion_Stop;
- }
-}
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/src/91x_ahbapb.c b/uc_str912/prj_template91x/str91x_lib/src/91x_ahbapb.c deleted file mode 100644 index 41489ac..0000000 --- a/uc_str912/prj_template91x/str91x_lib/src/91x_ahbapb.c +++ /dev/null @@ -1,177 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_ahbapb.c
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file provides all the AHBAPB software functions.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_ahbapb.h"
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-#define AHBAPB_SplitCounter_Mask 0xFFE0FFFF
-#define AHBAPB_SetTimeOut_Mask 0xFFFFFFE0
-#define AHBAPB_Address_Mask 0xFEFFFFFF
-#define AHBAPB_FLAG_RW_Mask 0x01000000
-/*******************************************************************************
-* Function Name : AHBAPB_DeInit
-* Description : Deinitializes the AHBAPBx peripheral registers to their default
-* reset values.
-* Input : AHBAPBx: where x can be 0 or 1 to select the AHBAPB peripheral.
-* Output : None
-* Return : None
-*******************************************************************************/
-void AHBAPB_DeInit(AHBAPB_TypeDef* AHBAPBx)
-{
- AHBAPBx->BCR = 0x00000000;
- AHBAPBx->BSR = 0x00000000;
-}
-/*******************************************************************************
-* Function Name : AHBAPB_Init
-* Description : Initializes the AHBAPBx peripheral according to the specified
-* parameters in the AHBAPB_InitStruct .
-* Input :- AHBAPBx: where x can be 0 or 1 to select the AHBAPB peripheral.
-* - AHBAPB_InitStruct: pointer to a AHBAPB_InitTypeDef structure that
-* contains the configuration information for the specified AHBAPB
-* peripheral.
-* Output : None
-* Return : None
-*******************************************************************************/
-void AHBAPB_Init(AHBAPB_TypeDef* AHBAPBx, AHBAPB_InitTypeDef* AHBAPB_InitStruct)
-{
-
- if(AHBAPB_InitStruct->AHBAPB_Split == AHBAPB_Split_Enable)
- {
- /* Set SPLITEN bit;*/
- AHBAPBx->BCR |= AHBAPB_Split_Enable;
- /*Split_CNT bits[20:16]*/
- AHBAPBx->BCR &= AHBAPB_SplitCounter_Mask;
- AHBAPBx->BCR |= (AHBAPB_InitStruct->AHBAPB_SplitCounter)<<16;
- }
- else
- {
- /*/ Clear SPLITEN bit;*/
- AHBAPBx->BCR &= AHBAPB_Split_Disable;
- }
- /*APB Time out*/
- if(AHBAPB_InitStruct->AHBAPB_Error == AHBAPB_Error_Enable)
- {
- /* Set ERREN bit*/
- AHBAPBx->BCR |= AHBAPB_Error_Enable;
- /*Time ouit counter*/
- AHBAPBx->BCR &= AHBAPB_SetTimeOut_Mask;
- AHBAPBx->BCR |= AHBAPB_InitStruct->AHBAPB_SetTimeOut;
- }
- else
- {
- /* Clear ERREN bit*/
- AHBAPBx->BCR &= AHBAPB_Error_Disable;
- }
-}
-
-/*******************************************************************************
-* Function Name : AHBAPB_StructInit
-* Description : Initialize the AHBAPB Init Structure parameters
-* Input : AHBAPB_InitStruct : pointer to a AHBAPB_InitTypeDef structure
-* which will be initialized.
-* Output : None
-* Return : None
-*******************************************************************************/
-void AHBAPB_StructInit(AHBAPB_InitTypeDef* AHBAPB_InitStruct)
-{
- /* Reset AHBAPB init structure parameters values */
- AHBAPB_InitStruct->AHBAPB_Split = AHBAPB_Split_Enable;
- AHBAPB_InitStruct->AHBAPB_SplitCounter = 0xFF;
- AHBAPB_InitStruct->AHBAPB_Error = AHBAPB_Error_Enable;
- AHBAPB_InitStruct->AHBAPB_SetTimeOut = 0xFF;
-
-}
-
-/*******************************************************************************
-* Function Name : AHBAPB_GetFlagStatus
-* Description : Checks whether the specified AHBAPB flag is set or not.
-* Input : - AHBAPB: where x can be 0 or 1 to select the AHBAPB peripheral
-* - AHBAPB_FLAG: specifies the flag to check.
-* This parameter can be one of the following values:
-* - AHBAPB_FLAG_ERROR: error flag
-* - AHBAPB_FLAG_OUTM : Out of Memory flag
-* - AHBAPB_FLAG_APBT : APB Time-out flag
-* - AHBAPB_FLAG_RW : Access type flag
-* Output : None
-* Return : The new state of AHBAPB_FLAG (SET or RESET).
-*******************************************************************************/
-FlagStatus AHBAPB_GetFlagStatus(AHBAPB_TypeDef* AHBAPBx, u8 AHBAPB_FLAG)
-{
- if(AHBAPB_FLAG == AHBAPB_FLAG_RW)
- {
- if ((AHBAPBx->PAER & AHBAPB_FLAG_RW_Mask) == RESET)
- {
- return RESET;
- }
- else
- {
- return SET;
- }
- }
- else
- {
- if ((AHBAPBx->BSR & AHBAPB_FLAG) == RESET)
- {
- return RESET;
- }
- else
- {
- return SET;
- }
- }
-}
-/*******************************************************************************
-* Function Name : AHBAPB_ClearFlag
-* Description : Clears the AHBAPBx flags.
-* Input : - AHBAPB: where x can be 0 or 1 to select the AHBAPB peripheral
-* - AHBAPB_FLAG: flags to clear. This parameter one of the
-* following values:
-* - AHBAPB_FLAG_ERROR: error flag
-* - AHBAPB_FLAG_OUTM : Out of Memory flag
-* - AHBAPB_FLAG_APBT : APB Time-out flag
-* Output : None
-* Return : None
-*******************************************************************************/
-void AHBAPB_ClearFlag(AHBAPB_TypeDef* AHBAPBx, u8 AHBAPB_FLAG)
-{
- /* Clear the flag */
- AHBAPBx->BSR &= AHBAPB_FLAG;
-}
-/*******************************************************************************
-* Function Name : AHBAPB_GetPeriphAddrError
-* Description : Gets the AHBAPB error address peripherals.
-* Input : - AHBAPB: where x can be 0 or 1 to select the AHBAPB peripheral
-* Output : None
-* Return : The Peropheral address error
-*******************************************************************************/
-u32 AHBAPB_GetPeriphAddrError(AHBAPB_TypeDef* AHBAPBx)
-{
- u32 AHBAPB_Address = 0x00000000;
-
- /*Return Oeripheral address without RW bit*/
- AHBAPB_Address = (AHBAPBx->PAER)& AHBAPB_Address_Mask;
- return (AHBAPB_Address);
-}
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/src/91x_can.c b/uc_str912/prj_template91x/str91x_lib/src/91x_can.c deleted file mode 100644 index e560d03..0000000 --- a/uc_str912/prj_template91x/str91x_lib/src/91x_can.c +++ /dev/null @@ -1,768 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_can.c
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file provides all the CAN software functions.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_can.h"
-#include "91x_scu.h"
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/*----------------------------------------------------------------------------*/
-/* Macro Name : xxx_ID_MSK, xxx_ID_ARB */
-/* Description : Form the Mask and Arbitration registers value to filter */
-/* a range of identifiers or a fixed identifier, for standard*/
-/* and extended IDs */
-/*----------------------------------------------------------------------------*/
-#define RANGE_ID_MSK(range_start, range_end) (~((range_end) - (range_start)))
-#define RANGE_ID_ARB(range_start, range_end) ((range_start) & (range_end))
-
-#define FIXED_ID_MSK(id) RANGE_ID_MSK((id), (id))
-#define FIXED_ID_ARB(id) RANGE_ID_ARB((id), (id))
-
-#define STD_RANGE_ID_MSK(range_start, range_end) ((u16)((RANGE_ID_MSK((range_start), (range_end)) & 0x7FF) << 2))
-#define STD_RANGE_ID_ARB(range_start, range_end) ((u16)(RANGE_ID_ARB((range_start), (range_end)) << 2))
-
-#define STD_FIXED_ID_MSK(id) ((u16)((FIXED_ID_MSK(id) & 0x7FF) << 2))
-#define STD_FIXED_ID_ARB(id) ((u16)(FIXED_ID_ARB(id) << 2))
-
-#define EXT_RANGE_ID_MSK_L(range_start, range_end) ((u16)(RANGE_ID_MSK((range_start), (range_end)) >> 11))
-#define EXT_RANGE_ID_MSK_H(range_start, range_end) ((u16)(STD_RANGE_ID_MSK((range_start), (range_end)) | ((RANGE_ID_MSK((range_start), (range_end)) >> 27) & 0x03)))
-#define EXT_RANGE_ID_ARB_L(range_start, range_end) ((u16)(RANGE_ID_ARB((range_start), (range_end)) >> 11))
-#define EXT_RANGE_ID_ARB_H(range_start, range_end) ((u16)(STD_RANGE_ID_ARB((range_start), (range_end)) | ((RANGE_ID_ARB((range_start), (range_end)) >> 27) & 0x03)))
-
-#define EXT_FIXED_ID_MSK_L(id) ((u16)(FIXED_ID_MSK(id) >> 11))
-#define EXT_FIXED_ID_MSK_H(id) ((u16)(STD_FIXED_ID_MSK(id) | ((FIXED_ID_MSK(id) >> 27) & 0x03)))
-#define EXT_FIXED_ID_ARB_L(id) ((u16)(FIXED_ID_ARB(id) >> 11))
-#define EXT_FIXED_ID_ARB_H(id) ((u16)(STD_FIXED_ID_ARB(id) | ((FIXED_ID_ARB(id) >> 27) & 0x03)))
-
-/* macro to format the timing register value from the timing parameters*/
-#define CAN_TIMING(tseg1, tseg2, sjw, brp) ((((tseg2-1) & 0x07) << 12) | (((tseg1-1) & 0x0F) << 8) | (((sjw-1) & 0x03) << 6) | ((brp-1) & 0x3F))
-
-/* Private variables ---------------------------------------------------------*/
-/* array of pre-defined timing parameters for standard bitrates*/
-u16 CanTimings[] = { /* value bitrate NTQ TSEG1 TSEG2 SJW BRP */
- CAN_TIMING(11, 4, 4, 5), /* 0x3AC4 100 kbit/s 16 11 4 4 5 */
- CAN_TIMING(11, 4, 4, 4), /* 0x3AC3 125 kbit/s 16 11 4 4 4 */
- CAN_TIMING( 4, 3, 3, 4), /* 0x2383 250 kbit/s 8 4 3 3 4 */
- CAN_TIMING(13, 2, 1, 1), /* 0x1C00 500 kbit/s 16 13 2 1 1 */
- CAN_TIMING( 4, 3, 1, 1), /* 0x2300 1 Mbit/s 8 4 3 1 1 */
-};
-
-/* Private function prototypes -----------------------------------------------*/
-static u32 GetFreeIF(void);
-/* Private functions ---------------------------------------------------------*/
-
-/*******************************************************************************
-* Function Name : CAN_DeInit
-* Description : Deinitializes the CAN peripheral registers to their default
-* reset values.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void CAN_DeInit (void)
-{
- /* Reset the CAN registers values*/
-
- SCU_APBPeriphReset(__CAN,ENABLE); /*CAN peripheral is under Reset */
- SCU_APBPeriphReset(__CAN,DISABLE); /*CAN peripheral Reset off*/
-
-
-}
-
-/*******************************************************************************
-* Function Name : CAN_Init
-* Description : Initializes the CAN peripheral according to the specified
-* parameters in the CAN_InitStruct.
-* Input : CAN_InitStruct: pointer to a CAN_InitTypeDef structure that
-* contains the configuration information for the CAN peripheral.
-* Output : None
-* Return : None
-*******************************************************************************/
-void CAN_Init(CAN_InitTypeDef* CAN_InitStruct)
-{
- CAN_EnterInitMode(CAN_CR_CCE | CAN_InitStruct->CAN_ConfigParameters);
- CAN_SetBitrate(CAN_InitStruct->CAN_Bitrate);
- CAN_LeaveInitMode();
- CAN_LeaveTestMode();
-}
-
-/*******************************************************************************
-* Function Name : CAN_StructInit
-* Description : Fills each CAN_InitStruct member with its reset value.
-* Input : CAN_InitStruct : pointer to a CAN_InitTypeDef structure which
-* will be initialized.
-* Output : None
-* Return : None.
-*******************************************************************************/
-void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct)
-{
-/* Reset CAN init structure parameters values */
- CAN_InitStruct->CAN_ConfigParameters = 0x0;
- CAN_InitStruct->CAN_Bitrate = 0x2301;
-}
-
-/*******************************************************************************
-* Function Name : CAN_SetBitrate
-* Description : Setups a standard CAN bitrate.
-* Input : bitrate: specifies the bit rate.
-* Output : None
-* Return : None
-*******************************************************************************/
-void CAN_SetBitrate(u32 bitrate)
-{
- CAN->BTR = CanTimings[bitrate]; /* write the predefined timing value */
- CAN->BRPR = 0; /* clear the Extended Baud Rate Prescaler */
-}
-
-/*******************************************************************************
-* Function Name : CAN_SetTiming
-* Description : Setups the CAN timing with specific parameters
-* Input : - tseg1: specifies Time Segment before the sample point.
-* This parameter must be a number between 1 and 16.
-* - tseg2: Time Segment after the sample point. This parameter
-* must be a number between 1 and 8.
-* - sjw: Synchronisation Jump Width. This parameter must be
-* a number between 1 and 4.
-* - brp: Baud Rate Prescaler. This parameter must be a number
-* between 1 and 1024.
-* Output : None
-* Return : None
-*******************************************************************************/
-void CAN_SetTiming(u32 tseg1, u32 tseg2, u32 sjw, u32 brp)
-{
- CAN->BTR = CAN_TIMING(tseg1, tseg2, sjw, brp);
- CAN->BRPR = ((brp-1) >> 6) & 0x0F;
-}
-
-/*******************************************************************************
-* Function Name : GetFreeIF
-* Description : Searchs the first free message interface, starting from 0.
-* Input : None
-* Output : None
-* Return : A free message interface number (0 or 1) if found, else 2
-*******************************************************************************/
-static u32 GetFreeIF(void)
-{
- if ((CAN->sMsgObj[0].CRR & CAN_CRR_BUSY) == 0)
- return 0;
- else if ((CAN->sMsgObj[1].CRR & CAN_CRR_BUSY) == 0)
- return 1;
- else
- return 2;
-}
-
-/*******************************************************************************
-* Function Name : CAN_SetUnusedMsgObj
-* Description : Configures the message object as unused
-* Input : msgobj: specifies the Message object number, from 0 to 31.
-* Output : None
-* Return : An ErrorStatus enumuration value:
-* - SUCCESS: Interface to treat the message
-* - ERROR: No interface to treat the message
-*******************************************************************************/
-ErrorStatus CAN_SetUnusedMsgObj(u32 msgobj)
-{
- u32 msg_if=0;
-
- if ((msg_if = GetFreeIF()) == 2)
- {
- return ERROR;
- }
-
- CAN->sMsgObj[msg_if].CMR = CAN_CMR_WRRD
- | CAN_CMR_MASK
- | CAN_CMR_ARB
- | CAN_CMR_CONTROL
- | CAN_CMR_DATAA
- | CAN_CMR_DATAB;
-
- CAN->sMsgObj[msg_if].M1R = 0;
- CAN->sMsgObj[msg_if].M2R = 0;
-
- CAN->sMsgObj[msg_if].A1R = 0;
- CAN->sMsgObj[msg_if].A2R = 0;
-
- CAN->sMsgObj[msg_if].MCR = 0;
-
- CAN->sMsgObj[msg_if].DA1R = 0;
- CAN->sMsgObj[msg_if].DA2R = 0;
- CAN->sMsgObj[msg_if].DB1R = 0;
- CAN->sMsgObj[msg_if].DB2R = 0;
-
- CAN->sMsgObj[msg_if].CRR = 1 + msgobj;
-
- return SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : CAN_SetTxMsgObj
-* Description : Configures the message object as TX.
-* Input : - msgobj: specifies the Message object number, from 0 to 31.
-* - idType: specifies the identifier type of the frames that
-* will be transmitted using this message object.
-* This parameter can be one of the following values:
-* - CAN_STD_ID (standard ID, 11-bit)
-* - CAN_EXT_ID (extended ID, 29-bit)
-* Output : None
-* Return : An ErrorStatus enumuration value:
-* - SUCCESS: Interface to treat the message
-* - ERROR: No interface to treat the message
-*******************************************************************************/
-ErrorStatus CAN_SetTxMsgObj(u32 msgobj, u32 idType)
-{
- u32 msg_if=0;
-
- if ((msg_if = GetFreeIF()) == 2)
- {
- return ERROR;
- }
-
- CAN->sMsgObj[msg_if].CMR = CAN_CMR_WRRD
- | CAN_CMR_MASK
- | CAN_CMR_ARB
- | CAN_CMR_CONTROL
- | CAN_CMR_DATAA
- | CAN_CMR_DATAB;
-
- CAN->sMsgObj[msg_if].M1R = 0;
- CAN->sMsgObj[msg_if].A1R = 0;
-
- if (idType == CAN_STD_ID)
- {
- CAN->sMsgObj[msg_if].M2R = CAN_M2R_MDIR;
- CAN->sMsgObj[msg_if].A2R = CAN_A2R_MSGVAL | CAN_A2R_DIR;
- }
- else
- {
- CAN->sMsgObj[msg_if].M2R = CAN_M2R_MDIR | CAN_M2R_MXTD;
- CAN->sMsgObj[msg_if].A2R = CAN_A2R_MSGVAL | CAN_A2R_DIR | CAN_A2R_XTD;
- }
-
- CAN->sMsgObj[msg_if].MCR = CAN_MCR_TXIE | CAN_MCR_EOB;
-
- CAN->sMsgObj[msg_if].DA1R = 0;
- CAN->sMsgObj[msg_if].DA2R = 0;
- CAN->sMsgObj[msg_if].DB1R = 0;
- CAN->sMsgObj[msg_if].DB2R = 0;
-
- CAN->sMsgObj[msg_if].CRR = 1 + msgobj;
-
- return SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : CAN_SetRxMsgObj
-* Description : Configures the message object as RX.
-* Input : - msgobj: specifies the Message object number, from 0 to 31.
-* - idType: specifies the identifier type of the frames that
-* will be transmitted using this message object.
-* This parameter can be one of the following values:
-* - CAN_STD_ID (standard ID, 11-bit)
-* - CAN_EXT_ID (extended ID, 29-bit)
-* - idLow: specifies the low part of the identifier range used
-* for acceptance filtering.
-* - idHigh: specifies the high part of the identifier range
-* used for acceptance filtering.
-* - singleOrFifoLast: specifies the end-of-buffer indicator.
-* This parameter can be one of the following values:
-* - TRUE: for a single receive object or a FIFO receive
-* object that is the last one of the FIFO.
-* - FALSE: for a FIFO receive object that is not the
-* last one.
-* Output : None
-* Return : An ErrorStatus enumuration value:
-* - SUCCESS: Interface to treat the message
-* - ERROR: No interface to treat the message
-*******************************************************************************/
-ErrorStatus CAN_SetRxMsgObj(u32 msgobj, u32 idType, u32 idLow, u32 idHigh, bool singleOrFifoLast)
-{
- u32 msg_if=0;
-
- if ((msg_if = GetFreeIF()) == 2)
- {
- return ERROR;
- }
-
- CAN->sMsgObj[msg_if].CMR = CAN_CMR_WRRD
- | CAN_CMR_MASK
- | CAN_CMR_ARB
- | CAN_CMR_CONTROL
- | CAN_CMR_DATAA
- | CAN_CMR_DATAB;
-
- if (idType == CAN_STD_ID)
- {
- CAN->sMsgObj[msg_if].M1R = 0;
- CAN->sMsgObj[msg_if].M2R = STD_RANGE_ID_MSK(idLow, idHigh);
-
- CAN->sMsgObj[msg_if].A1R = 0;
- CAN->sMsgObj[msg_if].A2R = CAN_A2R_MSGVAL | STD_RANGE_ID_ARB(idLow, idHigh);
- }
- else
- {
- CAN->sMsgObj[msg_if].M1R = EXT_RANGE_ID_MSK_L(idLow, idHigh);
- CAN->sMsgObj[msg_if].M2R = CAN_M2R_MXTD | EXT_RANGE_ID_MSK_H(idLow, idHigh);
-
- CAN->sMsgObj[msg_if].A1R = EXT_RANGE_ID_ARB_L(idLow, idHigh);
- CAN->sMsgObj[msg_if].A2R = CAN_A2R_MSGVAL | CAN_A2R_XTD | EXT_RANGE_ID_ARB_H(idLow, idHigh);
- }
-
- CAN->sMsgObj[msg_if].MCR = CAN_MCR_RXIE | CAN_MCR_UMASK | (singleOrFifoLast ? CAN_MCR_EOB : 0);
-
- CAN->sMsgObj[msg_if].DA1R = 0;
- CAN->sMsgObj[msg_if].DA2R = 0;
- CAN->sMsgObj[msg_if].DB1R = 0;
- CAN->sMsgObj[msg_if].DB2R = 0;
-
- CAN->sMsgObj[msg_if].CRR = 1 + msgobj;
-
- return SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : CAN_InvalidateAllMsgObj
-* Description : Configures all the message objects as unused.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void CAN_InvalidateAllMsgObj(void)
-{
- u32 i=0;
- for (i = 0; i < 32; i++)
- CAN_SetUnusedMsgObj(i);
-}
-
-
-/*******************************************************************************
-* Function Name : CAN_ReleaseMessage
-* Description : Releases the message object
-* Input : - msgobj: specifies the Message object number, from 0 to 31.
-* Output : None
-* Return : An ErrorStatus enumuration value:
-* - SUCCESS: Interface to treat the message
-* - ERROR: No interface to treat the message
-*******************************************************************************/
-ErrorStatus CAN_ReleaseMessage(u32 msgobj)
-{
- u32 msg_if=0;
-
- if ((msg_if = GetFreeIF()) == 2)
- {
- return ERROR;
- }
-
- CAN->sMsgObj[msg_if].CMR = CAN_CMR_CLRINTPND | CAN_CMR_TXRQSTNEWDAT;
- CAN->sMsgObj[msg_if].CRR = 1 + msgobj;
-
- return SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : CAN_SendMessage
-* Description : Start transmission of a message
-* Input : - msgobj: specifies the Message object number, from 0 to 31.
-* : - pCanMsg: pointer to the message structure containing data
-* to transmit.
-* Output : None
-* Return : An ErrorStatus enumuration value:
-* - SUCCESS: Transmission OK
-* - ERROR: No transmission
-*******************************************************************************/
-ErrorStatus CAN_SendMessage(u32 msgobj, canmsg* pCanMsg)
-{
- if (CAN->sMsgObj[0].CRR & CAN_CRR_BUSY)
- {
- return ERROR;
- }
-
- CAN->SR &= ~CAN_SR_TXOK;
-
- /* read the Arbitration and Message Control*/
- CAN->sMsgObj[0].CMR = CAN_CMR_ARB | CAN_CMR_CONTROL;
-
- CAN->sMsgObj[0].CRR = 1 + msgobj;
-
- if (CAN->sMsgObj[0].CRR & CAN_CRR_BUSY)
- {
- return ERROR;
- }
-
- /* update the contents needed for transmission*/
- CAN->sMsgObj[0].CMR = CAN_CMR_WRRD
- | CAN_CMR_ARB
- | CAN_CMR_CONTROL
- | CAN_CMR_DATAA
- | CAN_CMR_DATAB;
-
- if ((CAN->sMsgObj[0].A2R & CAN_A2R_XTD) == 0)
- {
- /* standard ID*/
- CAN->sMsgObj[0].A1R = 0;
- CAN->sMsgObj[0].A2R = (CAN->sMsgObj[0].A2R & 0xE000) | STD_FIXED_ID_ARB(pCanMsg->Id);
- }
- else
- {
- /* extended ID*/
- CAN->sMsgObj[0].A1R = EXT_FIXED_ID_ARB_L(pCanMsg->Id);
- CAN->sMsgObj[0].A2R = (CAN->sMsgObj[0].A2R & 0xE000) | EXT_FIXED_ID_ARB_H(pCanMsg->Id);
- }
-
- CAN->sMsgObj[0].MCR = (CAN->sMsgObj[0].MCR & 0xFEF0) | CAN_MCR_NEWDAT | CAN_MCR_TXRQST | pCanMsg->Dlc;
-
- CAN->sMsgObj[0].DA1R = ((u16)pCanMsg->Data[1]<<8) | pCanMsg->Data[0];
- CAN->sMsgObj[0].DA2R = ((u16)pCanMsg->Data[3]<<8) | pCanMsg->Data[2];
- CAN->sMsgObj[0].DB1R = ((u16)pCanMsg->Data[5]<<8) | pCanMsg->Data[4];
- CAN->sMsgObj[0].DB2R = ((u16)pCanMsg->Data[7]<<8) | pCanMsg->Data[6];
-
- CAN->sMsgObj[0].CRR = 1 + msgobj;
-
- return SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : CAN_ReceiveMessage
-* Description : Gets the message, if received.
-* Input : - msgobj: specifies the Message object number, from 0 to 31.
-* - release: specifies the message release indicator.
-* This parameter can be one of the following values:
-* - TRUE: the message object is released when getting
-* the data.
-* - FALSE: the message object is not released.
-* - pCanMsg: pointer to the message structure where received
-* data is copied.
-* Output : None
-* Return : An ErrorStatus enumuration value:
-* - SUCCESS: Reception OK
-* - ERROR: No message pending
-*******************************************************************************/
-ErrorStatus CAN_ReceiveMessage(u32 msgobj, bool release, canmsg* pCanMsg)
-{
- if (!CAN_IsMessageWaiting(msgobj))
- {
- return ERROR;
- }
-
- CAN->SR &= ~CAN_SR_RXOK;
-
- /* read the message contents*/
- CAN->sMsgObj[1].CMR = CAN_CMR_MASK
- | CAN_CMR_ARB
- | CAN_CMR_CONTROL
- | CAN_CMR_CLRINTPND
- | (release ? CAN_CMR_TXRQSTNEWDAT : 0)
- | CAN_CMR_DATAA
- | CAN_CMR_DATAB;
-
- CAN->sMsgObj[1].CRR = 1 + msgobj;
-
- if (CAN->sMsgObj[1].CRR & CAN_CRR_BUSY)
- {
- return ERROR;
- }
-
- if ((CAN->sMsgObj[1].A2R & CAN_A2R_XTD) == 0)
- {
- /* standard ID*/
- pCanMsg->IdType = CAN_STD_ID;
- pCanMsg->Id = (CAN->sMsgObj[1].A2R >> 2) & 0x07FF;
- }
- else
- {
- /* extended ID*/
- pCanMsg->IdType = CAN_EXT_ID;
- pCanMsg->Id = ((CAN->sMsgObj[1].A2R >> 2) & 0x07FF);
- pCanMsg->Id |= ((u32)CAN->sMsgObj[1].A1R << 11);
- pCanMsg->Id |= (((u32)CAN->sMsgObj[1].A2R & 0x0003) << 27);
- }
-
- pCanMsg->Dlc = CAN->sMsgObj[1].MCR & 0x0F;
-
- pCanMsg->Data[0] = (u8) CAN->sMsgObj[1].DA1R;
- pCanMsg->Data[1] = (u8)(CAN->sMsgObj[1].DA1R >> 8);
- pCanMsg->Data[2] = (u8) CAN->sMsgObj[1].DA2R;
- pCanMsg->Data[3] = (u8)(CAN->sMsgObj[1].DA2R >> 8);
- pCanMsg->Data[4] = (u8) CAN->sMsgObj[1].DB1R;
- pCanMsg->Data[5] = (u8)(CAN->sMsgObj[1].DB1R >> 8);
- pCanMsg->Data[6] = (u8) CAN->sMsgObj[1].DB2R;
- pCanMsg->Data[7] = (u8)(CAN->sMsgObj[1].DB2R >> 8);
-
- return SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : CAN_WaitEndOfTx
-* Description : Waits until current transmission is finished.
-* Input : None
-* Output : None
-* Return : An ErrorStatus enumuration value:
-* - SUCCESS: Transmission ended
-* - ERROR: Transmission did not occur yet
-*******************************************************************************/
-ErrorStatus CAN_WaitEndOfTx(void)
-{
- if ((CAN->SR & CAN_SR_TXOK) == 0)
- {
- return ERROR;
- }
- CAN->SR &= ~CAN_SR_TXOK;
-
- return SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : CAN_BasicSendMessage
-* Description : Starts transmission of a message in BASIC mode. This mode
-* does not use the message RAM.
-* Input : pCanMsg: Pointer to the message structure containing data to
-* transmit.
-* Output : None
-* Return : An ErrorStatus enumuration value:
-* - SUCCESS: Transmission OK
-* - ERROR: No transmission
-*******************************************************************************/
-ErrorStatus CAN_BasicSendMessage(canmsg* pCanMsg)
-{
- /* clear NewDat bit in IF2 to detect next reception*/
- CAN->sMsgObj[1].MCR &= ~CAN_MCR_NEWDAT;
-
- CAN->SR &= ~CAN_SR_TXOK;
- CAN->sMsgObj[0].CMR = CAN_CMR_WRRD
- | CAN_CMR_ARB
- | CAN_CMR_CONTROL
- | CAN_CMR_DATAA
- | CAN_CMR_DATAB;
-
- if (pCanMsg->IdType == CAN_STD_ID)
- {
- /* standard ID*/
- CAN->sMsgObj[0].A1R = 0;
- CAN->sMsgObj[0].A2R = (CAN->sMsgObj[0].A2R & 0xE000) | STD_FIXED_ID_ARB(pCanMsg->Id);
- }
- else
- {
- /* extended ID*/
- CAN->sMsgObj[0].A1R = EXT_FIXED_ID_ARB_L(pCanMsg->Id);
- CAN->sMsgObj[0].A2R = ((CAN->sMsgObj[0].A2R) & 0xE000) | EXT_FIXED_ID_ARB_H(pCanMsg->Id);
- }
-
- CAN->sMsgObj[0].MCR = (CAN->sMsgObj[0].MCR & 0xFCF0) | pCanMsg->Dlc;
-
- CAN->sMsgObj[0].DA1R = ((u16)pCanMsg->Data[1]<<8) | pCanMsg->Data[0];
- CAN->sMsgObj[0].DA2R = ((u16)pCanMsg->Data[3]<<8) | pCanMsg->Data[2];
- CAN->sMsgObj[0].DB1R = ((u16)pCanMsg->Data[5]<<8) | pCanMsg->Data[4];
- CAN->sMsgObj[0].DB2R = ((u16)pCanMsg->Data[7]<<8) | pCanMsg->Data[6];
-
- /* request transmission*/
- if (CAN->sMsgObj[0].CRR == CAN_CRR_BUSY )
- {
- return ERROR;
- }
-
- return SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : CAN_BasicReceiveMessage
-* Description : Gets the message in BASIC mode, if received. This mode does
-* not use the message RAM.
-* Input : pCanMsg: pointer to the message structure where message is copied.
-* Output : None
-* Return : An ErrorStatus enumuration value:
-* - SUCCESS: Reception OK
-* - ERROR: No message pending
-*******************************************************************************/
-ErrorStatus CAN_BasicReceiveMessage(canmsg* pCanMsg)
-{
- if ((CAN->sMsgObj[1].MCR & CAN_MCR_NEWDAT) == 0)
- {
- return ERROR;
- }
-
- CAN->SR &= ~CAN_SR_RXOK;
-
- CAN->sMsgObj[1].CMR = CAN_CMR_ARB
- | CAN_CMR_CONTROL
- | CAN_CMR_DATAA
- | CAN_CMR_DATAB;
-
- if ((CAN->sMsgObj[1].A2R & CAN_A2R_XTD) == 0)
- {
- /* standard ID*/
- pCanMsg->IdType = CAN_STD_ID;
- pCanMsg->Id = (CAN->sMsgObj[1].A2R >> 2) & 0x07FF;
- }
- else
- {
- /* extended ID*/
- pCanMsg->IdType = CAN_EXT_ID;
- pCanMsg->Id = ((CAN->sMsgObj[1].A2R >> 2) & 0x07FF);
- pCanMsg->Id |= ((u32)CAN->sMsgObj[1].A1R << 11);
- pCanMsg->Id |= (((u32)CAN->sMsgObj[1].A2R & 0x0003) << 27);
- }
-
- pCanMsg->Dlc = CAN->sMsgObj[1].MCR & 0x0F;
-
- pCanMsg->Data[0] = (u8) CAN->sMsgObj[1].DA1R;
- pCanMsg->Data[1] = (u8)(CAN->sMsgObj[1].DA1R >> 8);
- pCanMsg->Data[2] = (u8) CAN->sMsgObj[1].DA2R;
- pCanMsg->Data[3] = (u8)(CAN->sMsgObj[1].DA2R >> 8);
- pCanMsg->Data[4] = (u8) CAN->sMsgObj[1].DB1R;
- pCanMsg->Data[5] = (u8)(CAN->sMsgObj[1].DB1R >> 8);
- pCanMsg->Data[6] = (u8) CAN->sMsgObj[1].DB2R;
- pCanMsg->Data[7] = (u8)(CAN->sMsgObj[1].DB2R >> 8);
-
- return SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : CAN_EnterInitMode
-* Description : Switchs the CAN into initialization mode. This function must
-* be used in conjunction with CAN_LeaveInitMode().
-* Input : InitMask: specifies the CAN configuration in normal mode.
-* Output : None
-* Return : None
-*******************************************************************************/
-void CAN_EnterInitMode(u8 InitMask)
-{
- CAN->CR = InitMask | CAN_CR_INIT;
- CAN->SR = 0; /* reset the status*/
-}
-
-/*******************************************************************************
-* Function Name : CAN_LeaveInitMode
-* Description : Leaves the initialization mode (switch into normal mode).
-* This function must be used in conjunction with CAN_EnterInitMode().
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void CAN_LeaveInitMode(void)
-{
- CAN->CR &= ~(CAN_CR_INIT | CAN_CR_CCE);
-}
-
-/*******************************************************************************
-* Function Name : CAN_EnterTestMode
-* Description : Switchs the CAN into test mode. This function must be used in
-* conjunction with CAN_LeaveTestMode().
-* Input : TestMask: specifies the configuration in test modes.
-* Output : None
-* Return : None
-*******************************************************************************/
-void CAN_EnterTestMode(u8 TestMask)
-{
- CAN->CR |= CAN_CR_TEST;
- CAN->TESTR |= TestMask;
-}
-
-/*******************************************************************************
-* Function Name : CAN_LeaveTestMode
-* Description : Leaves the current test mode (switch into normal mode).
-* This function must be used in conjunction with CAN_EnterTestMode().
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void CAN_LeaveTestMode(void)
-{
- CAN->CR |= CAN_CR_TEST;
- CAN->TESTR &= ~(CAN_TESTR_LBACK | CAN_TESTR_SILENT | CAN_TESTR_BASIC);
- CAN->CR &= ~CAN_CR_TEST;
-}
-
-/*******************************************************************************
-* Function Name : CAN_ReleaseTxMessage
-* Description : Releases the transmit message object.
-* Input : - msgobj: specifies the Message object number, from 0 to 31.
-* Output : None
-* Return : None
-*******************************************************************************/
-void CAN_ReleaseTxMessage(u32 msgobj)
-{
- CAN->sMsgObj[0].CMR = CAN_CMR_CLRINTPND | CAN_CMR_TXRQSTNEWDAT;
- CAN->sMsgObj[0].CRR = 1 + msgobj;
-}
-
-/*******************************************************************************
-* Function Name : CAN_ReleaseRxMessage
-* Description : Releases the receive message object.
-* Input : - msgobj: specifies the Message object number, from 0 to 31.
-* Output : None
-* Return : None
-*******************************************************************************/
-void CAN_ReleaseRxMessage(u32 msgobj)
-{
- CAN->sMsgObj[1].CMR = CAN_CMR_CLRINTPND | CAN_CMR_TXRQSTNEWDAT;
- CAN->sMsgObj[1].CRR = 1 + msgobj;
-}
-
-/*******************************************************************************
-* Function Name : CAN_IsMessageWaiting
-* Description : Tests the waiting status of a received message.
-* Input : - msgobj: specifies the Message object number, from 0 to 31.
-* Output : None
-* Return : A non-zero value if the corresponding message object has
-* received a message waiting to be copied, else 0.
-*******************************************************************************/
-u32 CAN_IsMessageWaiting(u32 msgobj)
-{
- return (msgobj < 16 ? CAN->ND1R & (1 << msgobj) : CAN->ND2R & (1 << (msgobj-16)));
-}
-
-/*******************************************************************************
-* Function Name : CAN_IsTransmitRequested
-* Description : Tests the request status of a transmitted message.
-* Input : - msgobj: specifies the Message object number, from 0 to 31.
-* Output : None
-* Return : A non-zero value if the corresponding message is requested
-* to transmit, else 0.
-*******************************************************************************/
-u32 CAN_IsTransmitRequested(u32 msgobj)
-{
- return (msgobj < 16 ? CAN->TXR1R & (1 << msgobj) : CAN->TXR2R & (1 << (msgobj-16)));
-}
-
-/*******************************************************************************
-* Function Name : CAN_IsInterruptPending
-* Description : Tests the interrupt status of a message object.
-* Input : - msgobj: specifies the Message object number, from 0 to 31.
-* Output : None
-* Return : A non-zero value if the corresponding message has an
-* interrupt pending, else 0.
-*******************************************************************************/
-u32 CAN_IsInterruptPending(u32 msgobj)
-{
- return (msgobj < 16 ? CAN->IP1R & (1 << msgobj) : CAN->IP2R & (1 << (msgobj-16)));
-}
-
-/*******************************************************************************
-* Function Name : CAN_IsObjectValid
-* Description : Tests the validity of a message object (ready to use).
-* Input : - msgobj: specifies the Message object number, from 0 to 31.
-* Output : None
-* Return : A non-zero value if the corresponding message object is
-* valid, else 0.
-*******************************************************************************/
-u32 CAN_IsObjectValid(u32 msgobj)
-{
- return (msgobj < 16 ? CAN->MV1R & (1 << msgobj) : CAN->MV2R & (1 << (msgobj-16)));
-}
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/src/91x_dma.c b/uc_str912/prj_template91x/str91x_lib/src/91x_dma.c deleted file mode 100644 index db6ad6e..0000000 --- a/uc_str912/prj_template91x/str91x_lib/src/91x_dma.c +++ /dev/null @@ -1,1125 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_dma.c
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file provides all the DMA software functions
-* needed to access all DMA registers.
-********************************************************************************
-* History:v 1.0
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Includes ------------------------------------------------------------------*/
-
-# include"91x_dma.h"
-# include"91x_scu.h"
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-
-
-/* DMA Masks "used" only in this module */
-
-#define DMA_Width_DES_MASK 0xFF1FFFFF
-#define DMA_Width_SRC_MASK 0xFFE3FFFF
-#define DMA_Bst_DES_MASK 0xFFFC7FFF
-#define DMA_Bst_SRC_MASK 0xFFFF8FFF
-#define DMA_FlowCntrl_Mask 0xFFFFC7FF
-#define DMA_TrsfSisze_Mask 0xFFFFF000
-#define SRC_Mask 0xFFFFFFE1
-#define DES_Mask 0xFFFFFC3F
-#define DMA_TCIE 0x80000000
-#define DMA_ChannelDESInc 0x08000000
-#define DMA_ChannelSRCInc 0x04000000
-#define DMA_BufferChannel 0x20000000
-#define DMA_HaltChannel 0x00040000
-#define DMA_LockChannel 0x00010000
-#define DMA_CacheChannel 0x40000000
-#define DMA_ChannelActive 0x00020000
-#define DMA_Enable 0x00000001
-#define DMA_ChannelEnable 0x00000001
-
-
-
-
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/*******************************************************************************
-* Function Name : DMA_ITMaskConfig
-* Description : Enables or disables the specified DMA_Channelx Mask interrupt.
-* Input :
-* -DMA_Channelx: where x can be 0,1,2,3,4,5,6,or 7 to select the DMA Channel.
-* -DMA_ITMask: specifies the DMA interrupt mask source to be enabled or disabled.
-* This parameter can be:
-* - DMA_ITMask_IE (Interrupt error mask).
-* - DMA_ITMask_ITC (Terminal count interrupt mask).
-* - DMA_ITMask_ALL ( All interrupts mask)
-*
-* -NewState: new state of the specified DMA_Channelx mask interrupt.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None.
-* Return : None.
-*******************************************************************************/
-
-
-void DMA_ITMaskConfig(DMA_Channel_TypeDef * DMA_Channelx, u16 DMA_ITMask , FunctionalState NewState)
-
-{
- if (NewState==ENABLE) /* Mask the Interrupt */
- {
- DMA_Channelx-> CCNF |= DMA_ITMask ;
- }
-
- else /* Disable the Interrupt Mask*/
- {
- DMA_Channelx-> CCNF &= ~ DMA_ITMask ;
- }
-}
-
-
-
-
-
-/*******************************************************************************
-* Function Name : DMA_ITConfig
-* Description : Enables or disables the DMA_Channelx Terminal Count interrupt.
-* Input :
-* -DMA_Channelx: where x can be 0,1,2,3,4,5,6,or 7 to select the DMA Channel.
-* -NewState: new state of the specified DMA_Channelx mask interrupt.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None.
-* Return : None.
-*******************************************************************************/
-
-
-void DMA_ITConfig(DMA_Channel_TypeDef * DMA_Channelx, FunctionalState NewState)
-
-{
- if (NewState==ENABLE) /* Enable the Terminal Count Interrupt */
- {
- DMA_Channelx->CC |= DMA_TCIE ;
- }
-
- else /* Disable the Terminal Count Interrupt */
- {
- DMA_Channelx-> CC &= ~ DMA_TCIE ;
- }
-}
-
-
-/********************************************************************************
-* Function Name : DMA_SyncConfig
-* Description : Enables or disables synchronization logic for the corresponding DMA Request Signal.
-* Input :
-* -SRCReq:specifies the DMA Request Source.
-* This parameter can be:
-* -DMA_USB_RX_Mask
-* -DMA_USB_TX_Mask
-* -DMA_TIM0_Mask
-* -DMA_TIM1_Mask
-* -DMA_UART0_RX_Mask
-* -DMA_UART0_TX_Mask
-* -DMA_UART1_RX_Mask
-* -DMA_UART1_TX_Mask
-* -DMA_External_Req0_Mask
-* -DMA_External_Req1_Mask
-* -DMA_I2C0_Mask
-* -DMA_I2C1_Mask
-* -DMA_SSP0_RX_Mask
-* -DMA_SSP0_TX_Mask
-* -DMA_SSP1_RX_Mask
-* -DMA_SSP1_TX_Mask
-*
-* -NewState: new state of the specified DMA_Channelx mask interrupt.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None.
-* Return : None.
-*******************************************************************************/
-
-
-void DMA_SyncConfig(u16 SRCReq, FunctionalState NewState)
-
-{
- if (NewState==ENABLE) /* Enable the synchronization logic for the corresponding DMA Request Signal */
- {
-
- DMA->SYNR &= ~ SRCReq ;
-
- }
-
- else /* Disable the synchronization logic for the corresponding DMA Request Signal. */
- {
- DMA->SYNR |= SRCReq ;
-
- }
-}
-
-
-/********************************************************************************
-* Function Name : DMA_SetSReq
-* Description : Set the DMA to generate a Single transfer request for the corresponding DMA Request Source.
-* Input :
-* -SRCReq:specifies the DMA Request Source.
-* This parameter can be:
-* -DMA_USB_RX_Mask
-* -DMA_USB_TX_Mask
-* -DMA_TIM0_Mask
-* -DMA_TIM1_Mask
-* -DMA_UART0_RX_Mask
-* -DMA_UART0_TX_Mask
-* -DMA_UART1_RX_Mask
-* -DMA_UART1_TX_Mask
-* -DMA_External_Req0_Mask
-* -DMA_External_Req1_Mask
-* -DMA_I2C0_Mask
-* -DMA_I2C1_Mask
-* -DMA_SSP0_RX_Mask
-* -DMA_SSP0_TX_Mask
-* -DMA_SSP1_RX_Mask
-* -DMA_SSP1_TX_Mask
-*
-* Output : None.
-* Return : None.
-*******************************************************************************/
-
-
-void DMA_SetSReq(u16 SRCReq)
-
-{ /* Set the DMA to generate a Single transfer request for the corresponding DMA Request Source */
- DMA->SSRR |= SRCReq ;
-}
-
-
-
-
-/********************************************************************************
-* Function Name : DMA_SetLSReq
-* Description : Set the DMA to generate a Last Single transfer request for the corresponding DMA Request Source.
-* Input :
-* -SRCReq:specifies the DMA Request Source.
-* This parameter can be:
-* -DMA_USB_RX_Mask
-* -DMA_USB_TX_Mask
-* -DMA_TIM0_Mask
-* -DMA_TIM1_Mask
-* -DMA_UART0_RX_Mask
-* -DMA_UART0_TX_Mask
-* -DMA_UART1_RX_Mask
-* -DMA_UART1_TX_Mask
-* -DMA_External_Req0_Mask
-* -DMA_External_Req1_Mask
-* -DMA_I2C0_Mask
-* -DMA_I2C1_Mask
-* -DMA_SSP0_RX_Mask
-* -DMA_SSP0_TX_Mask
-* -DMA_SSP1_RX_Mask
-* -DMA_SSP1_TX_Mask
-* Output : None.
-* Return : None.
-*******************************************************************************/
-
-void DMA_SetLSReq(u16 SRCReq )
-{ /* Set the DMA to generate a Last Single transfer request for the corresponding DMA Request Source */
- DMA->SLSRR |= SRCReq ;
-}
-
-
-/********************************************************************************
-* Function Name : DMA_SetBReq
-* Description : Set the DMA to generate a Burst transfer request for the corresponding DMA Request Source.
-* Input :
-* -SRCReq:specifies the DMA Request Source.
-* This parameter can be:
-* -DMA_USB_RX_Mask
-* -DMA_USB_TX_Mask
-* -DMA_TIM0_Mask
-* -DMA_TIM1_Mask
-* -DMA_UART0_RX_Mask
-* -DMA_UART0_TX_Mask
-* -DMA_UART1_RX_Mask
-* -DMA_UART1_TX_Mask
-* -DMA_External_Req0_Mask
-* -DMA_External_Req1_Mask
-* -DMA_I2C0_Mask
-* -DMA_I2C1_Mask
-* -DMA_SSP0_RX_Mask
-* -DMA_SSP0_TX_Mask
-* -DMA_SSP1_RX_Mask
-* -DMA_SSP1_TX_Mask
-* Output : None.
-* Return : None.
-*******************************************************************************/
-
-
-void DMA_SetBReq(u16 SRCReq)
-
-{ /* Set the DMA to generate a Burst transfer request for the corresponding DMA Request Source */
- DMA->SBRR |= SRCReq ;
-}
-
-
-
-/********************************************************************************
-* Function Name : DMA_SetLBReq
-* Description : Set the DMA to generate a Last Burst transfer request for the corresponding DMA Request Source.
-* Input :
-* -SRCReq:specifies the DMA Request Source.
-* This parameter can be:
-* -DMA_USB_RX_Mask
-* -DMA_USB_TX_Mask
-* -DMA_TIM0_Mask
-* -DMA_TIM1_Mask
-* -DMA_UART0_RX_Mask
-* -DMA_UART0_TX_Mask
-* -DMA_UART1_RX_Mask
-* -DMA_UART1_TX_Mask
-* -DMA_External_Req0_Mask
-* -DMA_External_Req1_Mask
-* -DMA_I2C0_Mask
-* -DMA_I2C1_Mask
-* -DMA_SSP0_RX_Mask
-* -DMA_SSP0_TX_Mask
-* -DMA_SSP1_RX_Mask
-* -DMA_SSP1_TX_Mask
-* Output : None.
-* Return : None.
-*******************************************************************************/
-
-
-void DMA_SetLBReq(u16 SRCReq)
-
-{ /* Set the DMA to generate a Last Burst transfer request for the corresponding DMA Request Source */
- DMA->SLBRR |= SRCReq ;
-}
-
-
-/********************************************************************************
-* Function Name : DMA_GetSReq
-* Description : Check for a specific source if it request a Single transfer .
-* Input :
-* Input :
-* -SRCReq:specifies the DMA Request Source.
-* This parameter can be:
-* -DMA_USB_RX_Mask
-* -DMA_USB_TX_Mask
-* -DMA_TIM0_Mask
-* -DMA_TIM1_Mask
-* -DMA_UART0_RX_Mask
-* -DMA_UART0_TX_Mask
-* -DMA_UART1_RX_Mask
-* -DMA_UART1_TX_Mask
-* -DMA_External_Req0_Mask
-* -DMA_External_Req1_Mask
-* -DMA_I2C0_Mask
-* -DMA_I2C1_Mask
-* -DMA_SSP0_RX_Mask
-* -DMA_SSP0_TX_Mask
-* -DMA_SSP1_RX_Mask
-* -DMA_SSP1_TX_Mask
-* Output : None.
-* Return : SET or RESET.
-*******************************************************************************/
-
-
-FlagStatus DMA_GetSReq(u16 SRCReq)
-
-{ /* Check for a specific source if it request a Single transfer . */
- if ( (DMA->SSRR & SRCReq )!= RESET )
- {
- return SET;
- }
-
- else
- {
- return RESET;
- }
-}
-
-
-/********************************************************************************
-* Function Name : DMA_GetLSReq
-* Description : Check for a specific source if it request a Last Single transfer .
-* Input :
-* -SRCReq:specifies the DMA Request Source.
-* This parameter can be:
-* -DMA_USB_RX_Mask
-* -DMA_USB_TX_Mask
-* -DMA_TIM0_Mask
-* -DMA_TIM1_Mask
-* -DMA_UART0_RX_Mask
-* -DMA_UART0_TX_Mask
-* -DMA_UART1_RX_Mask
-* -DMA_UART1_TX_Mask
-* -DMA_External_Req0_Mask
-* -DMA_External_Req1_Mask
-* -DMA_I2C0_Mask
-* -DMA_I2C1_Mask
-* -DMA_SSP0_RX_Mask
-* -DMA_SSP0_TX_Mask
-* -DMA_SSP1_RX_Mask
-* -DMA_SSP1_TX_Mask
-* Output : None.
-* Return : SET or RESET.
-*******************************************************************************/
-
-
-FlagStatus DMA_GetLSReq(u16 SRCReq)
-
-{ /* Check for a specific source if it request a Last Single transfer . */
- if ( (DMA->SLSRR & SRCReq)!= RESET )
- {
- return SET;
- }
-
- else
- {
- return RESET;
- }
-}
-
-/********************************************************************************
-* Function Name : DMA_GetBReq
-* Description : Check for a specific source if it request a Burst transfer .
-* Input :
-* -SRCReq:specifies the DMA Request Source.
-* This parameter can be:
-* -DMA_USB_RX_Mask
-* -DMA_USB_TX_Mask
-* -DMA_TIM0_Mask
-* -DMA_TIM1_Mask
-* -DMA_UART0_RX_Mask
-* -DMA_UART0_TX_Mask
-* -DMA_UART1_RX_Mask
-* -DMA_UART1_TX_Mask
-* -DMA_External_Req0_Mask
-* -DMA_External_Req1_Mask
-* -DMA_I2C0_Mask
-* -DMA_I2C1_Mask
-* -DMA_SSP0_RX_Mask
-* -DMA_SSP0_TX_Mask
-* -DMA_SSP1_RX_Mask
-* -DMA_SSP1_TX_Mask
-* Output : None.
-* Return : SET or RESET.
-*******************************************************************************/
-
-
-FlagStatus DMA_GetBReq(u16 SRCReq)
-
-{ /* Check for a specific source if it request a Burst transfer . */
- if (( DMA->SBRR & SRCReq ) != RESET )
- {
- return SET;
- }
-
- else
- {
- return RESET;
- }
-}
-
-/********************************************************************************
-* Function Name : DMA_GetLSReq
-* Description : Check for a specific source if it request a Last Burst transfer .
-* Input :
-* Input :
-* - SRCReq:specifies the DMA Request Source.
-* This parameter can be:
-* -DMA_USB_RX_Mask
-* -DMA_USB_TX_Mask
-* -DMA_TIM0_Mask
-* -DMA_TIM1_Mask
-* -DMA_UART0_RX_Mask
-* -DMA_UART0_TX_Mask
-* -DMA_UART1_RX_Mask
-* -DMA_UART1_TX_Mask
-* -DMA_External_Req0_Mask
-* -DMA_External_Req1_Mask
-* -DMA_I2C0_Mask
-* -DMA_I2C1_Mask
-* -DMA_SSP0_RX_Mask
-* -DMA_SSP0_TX_Mask
-* -DMA_SSP1_RX_Mask
-* -DMA_SSP1_TX_Mask
-* Output : None.
-* Return : SET or RESET.
-*******************************************************************************/
-
-
-FlagStatus DMA_GetLBReq(u16 SRCReq)
-
-{ /* Check for a specific source if it request a Last Burst transfer . */
- if ( ( DMA->SLBRR & SRCReq ) != RESET )
- {
- return SET;
- }
-
- else
- {
- return RESET;
- }
-}
-
-
-
-/*******************************************************************************
-* Function Name : DMA_ChannelHalt
-* Description : Enables DMA requests or ignore extra source DMA requests for
- the specified channel.
-* Input :
- -DMA_Channelx: where x can be 0,1,2,3,4,5,6,or 7 to select the DMA Channel.
- -NewState: new state of the specified DMA_Channelx mask interrupt.
- This parameter can be: ENABLE or DISABLE.
-* Output : None.
-* Return : None.
-*******************************************************************************/
-
-
-void DMA_ChannelHalt(DMA_Channel_TypeDef * DMA_Channelx, FunctionalState NewState)
-
-{
- if (NewState==ENABLE) /* Enables DMA requests */
-
- {
- DMA_Channelx->CCNF |= DMA_HaltChannel ;
- }
-
- else /* Ignore extra source DMA request */
- {
- DMA_Channelx->CCNF &= ~ DMA_HaltChannel ;
- }
-}
-
-
-/*******************************************************************************
-* Function Name : DMA_ChannelLockTrsf
-* Description : Enables or disables the Locked Transfers Feature for the specified DMA_Channelx
-* Input :
-* -DMA_Channelx: where x can be 0,1,2,3,4,5,6,or 7 to select the DMA Channel.
-* -NewState: new state of the specified DMA_Channelx mask interrupt.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None.
-* Return : None.
-*******************************************************************************/
-
-
-void DMA_ChannelLockTrsf(DMA_Channel_TypeDef * DMA_Channelx, FunctionalState NewState)
-
-{
- if (NewState==ENABLE) /* Locked transfers enabled on channel x */
-
- {
- DMA_Channelx->CCNF |= DMA_LockChannel ;
- }
-
- else /* Locked transfers disabled on channel xt */
- {
- DMA_Channelx->CCNF &= ~ DMA_LockChannel;
- }
-}
-
-
-/*******************************************************************************
-* Function Name : DMA_ChannelCache
-* Description : Enables or disables the cacheability Feature for the specified DMA_Channelx
-* Input :
-* -DMA_Channelx: where x can be 0,1,2,3,4,5,6,or 7 to select the DMA Channel.
-* -NewState: new state of the specified DMA_Channelx mask interrupt.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None.
-* Return : None.
-*******************************************************************************/
-
-
-void DMA_ChannelCache (DMA_Channel_TypeDef * DMA_Channelx, FunctionalState NewState)
-
-{
- if (NewState==ENABLE) /* Cacheability Feature enabled on channelx */
-
- {
- DMA_Channelx->CC |= DMA_CacheChannel ;
- }
-
- else /* Cacheability Feature disabled on channelx */
- {
- DMA_Channelx->CC &= ~ DMA_CacheChannel ;
- }
-}
-
-
-/*******************************************************************************
-* Function Name : DMA_ChannelBuffering
-* Description : Enables or disables the Buffering Feature for the specified DMA_Channelx
-* Input :
-* -DMA_Channelx: where x can be 0,1,2,3,4,5,6,or 7 to select the DMA Channel.
-* -NewState: new state of the specified DMA_Channelx mask interrupt.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None.
-* Return : None.
-*******************************************************************************/
-
-
-void DMA_ChannelBuffering (DMA_Channel_TypeDef * DMA_Channelx, FunctionalState NewState)
-
-{
- if (NewState==ENABLE) /* Cacheability Feature enabled on channel x */
-
- {
- DMA_Channelx->CC |= DMA_BufferChannel ;
- }
-
- else /* Cacheability Feature disabled on channel xt */
- {
- DMA_Channelx->CC &= ~ DMA_BufferChannel ;
- }
-}
-
-/*******************************************************************************
-* Function Name : MA_ChannelProt0Mod
-* Description : Sets The User or Privileged mode for the specified DMA_Channelx
-* Input :
-* -DMA_Channelx: where x can be 0,1,2,3,4,5,6,or 7 to select the DMA Channel.
-* -Prot0Mode: Specifies the Privileged mode Or the User mode.
-* This parameter can be:
-* - DMA_PrevilegedMode
-* - DMA_UserMode
-*
-*
-* Output : None.
-* Return : None.
-*******************************************************************************/
-
-
-void DMA_ChannelProt0Mode (DMA_Channel_TypeDef * DMA_Channelx, u32 Prot0Mode)
-
-{
- if (Prot0Mode==DMA_PrevilegedMode) /* Privileged mode */
- {
- DMA_Channelx->CC |= DMA_PrevilegedMode ;
- }
-
- else /* User mode */
- {
- DMA_Channelx->CC &= DMA_UserMode ;
- }
-}
-
-
-
-
-
-/*******************************************************************************
-* Function Name : DMA_ChannelSRCIncConfig
-* Description : Enables or disables the Source address incrementation after each transfer for
-* the specified DMA_Channelx
-* Input :
-* -DMA_Channelx: where x can be 0,1,2,3,4,5,6,or 7 to select the DMA Channel.
-* -NewState: new state of the specified DMA_Channelx mask interrupt.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None.
-* Return : None.
-*******************************************************************************/
-
-
-void DMA_ChannelSRCIncConfig (DMA_Channel_TypeDef * DMA_Channelx, FunctionalState NewState)
-
-{
- if (NewState==ENABLE) /* The Source address is incremented after each transfer */
-
- {
- DMA_Channelx->CC |= DMA_ChannelSRCInc ;
- }
-
- else /* The Source address is not incremented after each Transfer */
- {
- DMA_Channelx->CC &= ~ DMA_ChannelSRCInc ;
- }
-}
-
-
-/*******************************************************************************
-* Function Name : DMA_ChannelDESIncConfig
-* Description : Enables or disables the Destination address incrementation after each transfer for
-* the specified DMA_Channelx
-* Input :
-* -DMA_Channelx: where x can be 0,1,2,3,4,5,6,or 7 to select the DMA Channel.
-* -NewState: new state of the specified DMA_Channelx mask interrupt.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None.
-* Return : None.
-*******************************************************************************/
-
-
-void DMA_ChannelDESIncConfig (DMA_Channel_TypeDef * DMA_Channelx, FunctionalState NewState)
-
-{
- if (NewState==ENABLE) /* The Destination address is incremented after each transfer */
-
- {
- DMA_Channelx->CC |= DMA_ChannelDESInc ;
- }
-
- else /* The Destination address is not incremented after each Transfer */
- {
- DMA_Channelx->CC &= ~ DMA_ChannelDESInc ;
- }
-}
-
-
-
-/********************************************************************************
-* Function Name : DMA_GetChannelStatus
-* Description : Checks the status of DMA channelx ( Enabled or Disabled).
-* - ChannelIndx:specifies the DMA Channel to be checked.
-* This parameter can be:
-* - Channel0
-* - Channel1
-* - Channel2
-* - Channel3
-* - Channel4
-* - Channel5
-* - Channel6
-* - Channel7
-* Output : None.
-*
-* Return : SET or RESET.
-*******************************************************************************/
-
-
-FlagStatus DMA_GetChannelStatus(u8 ChannelIndx )
-
-{
-
- if ( ( DMA->ENCSR & (1 << ChannelIndx )) != RESET )
- {
- return SET; /* Channelx Enabled */
- }
-
- else
-
- {
-
- return RESET; /* Channelx Disabled */
-
- }
-
-}
-
-
-
-/********************************************************************************
-* Function Name : DMA_GetITStatus
-* Description : Checks the status of Terminal Count and Error interrupts request after and before Masking.
-* Input :
-* - ChannelIndx:specifies the DMA Channel to be checked.
-* This parameter can be:
-* - Channel0
-* - Channel1
-* - Channel2
-* - Channel3
-* - Channel4
-* - Channel5
-* - Channel6
-* - Channel7
-*
-*. - DMA_ITReq: specifies the DMA interrupt request status to be checked.
-* This parameter can be:
-*
-* - DMA_IS
-* - DMA_TCS
-* - DMA_ES
-* - DMA_TCRS
-* - DMA_ERS.
-*
-* Output : None.
-*
-* Return : SET or RESET.
-*******************************************************************************/
-
-
-ITStatus DMA_GetITStatus(u8 ChannelIndx,u8 DMA_ITReq)
-
-{
- u32 DMAReg = 0;
-
- switch(DMA_ITReq)
-
- {
-
- case (DMA_IS): /*The status of the interrupts after masking : logical or of all Interrupts after Masking*/
- DMAReg = DMA->ISR;
- break;
-
-
-
- case (DMA_TCS): /* The status of the Terminal count request after masking */
- DMAReg = DMA->TCISR;
- break;
-
-
- case (DMA_ES): /* The status of the error request after masking */
- DMAReg = DMA->EISR;
- break;
-
-
- case (DMA_TCRS): /* Indicates if the DMA channel is requesting a transfer complete (terminal count Interrupt) prior to masking or Not. */
- DMAReg = DMA->TCRISR;
- break;
-
- case (DMA_ERS): /* Indicates if the DMA channel is requesting an Error Interrupt prior to masking or Not. */
- DMAReg = DMA->ERISR;
- break;
-
-
- }
-
- if((DMAReg &(1 << ChannelIndx )) != RESET )
-
- {
- return SET;
- }
-
- else
-
- {
-
- return RESET;
-
-
- }
-
-}
-
-
-/********************************************************************************
-* Function Name : DMA_ClearIT
-* Description : Clears The Interrupt pending bits for termnal count or Error interrupts for a specified DMA Channel.
-* - ChannelIndx:specifies the DMA Channel to be checked.
-* This parameter can be:
-* - Channel0
-* - Channel1
-* - Channel2
-* - Channel3
-* - Channel4
-* - Channel5
-* - Channel6
-* - Channel7
-* - DMA_ITClr : Specifies the DMA interrupt pending to be cleared.
-*. This parameter can be:
-* - DMA_TCC
-* - DMA_EC.
-*
-* Output : None.
-
-* Return : SET or RESET.
-*******************************************************************************/
-
-
-void DMA_ClearIT(u8 ChannelIndx,u8 DMA_ITClr)
-
-{
-
-
- switch(DMA_ITClr)
-
- {
-
- case (DMA_TCC): /* Clear The status of the Terminal count interrupt on the corresponding channel.*/
- DMA->TCICR |=(1 << ChannelIndx );
- break;
-
-
-
- case (DMA_EC): /* Clear The status of the error interrupt on the corresponding channel.*/
- DMA->EICR |=(1 << ChannelIndx );
- break;
-
-
-
- }
-
-
-
-}
-
-
-/*******************************************************************************
-* Function Name : DMA_Cmd(FunctionalState NewState)
-* Description : Enables or disables the DMA peripheral.
-*
-* Input :
-* -NewState: new state of the DMA.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None.
-* Return : None.
-*******************************************************************************/
-
-
-void DMA_Cmd(FunctionalState NewState)
-
-{
- if (NewState==ENABLE) /* ENABLE the DMA peripheral */
-
- {
- DMA-> CNFR |= DMA_Enable ;
- }
-
- else /* DISABLE the DMA peripheral */
- {
- DMA-> CNFR &= ~ DMA_Enable ;
- }
-}
-
-
-
-/*******************************************************************************
-* Function Name : DMA_ChannelCmd
-* Description : Enables or disables the specified DMA_Channelx
-*
-* Input :
-* -DMA_Channelx: where x can be 0,1,2,3,4,5,6,or 7 to select the DMA Channel.
-* -NewState: new state of the specified DMA_Channelx mask interrupt.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None.
-* Return : None.
-*******************************************************************************/
-
-
-void DMA_ChannelCmd (DMA_Channel_TypeDef *DMA_Channelx,FunctionalState NewState)
-
-{
- if (NewState==ENABLE) /* Enable The Channelx */
-
- {
- DMA_Channelx->CCNF |= DMA_ChannelEnable ;
- }
-
- else /* Disable The Channelx */
- {
- DMA_Channelx-> CCNF &= ~ DMA_ChannelEnable ;
- }
-}
-
-
-
-/********************************************************************************
-* Function Name : DMA_GetChannelActiveStatus
-* Description : Checks The DMA_Channelx FIFO if it has data or not.
-* Input :
-* -DMA_Channelx: where x can be 0,1,2,3,4,5,6,or 7 to select the DMA Channel.
-*
-*
-* Output : None.
-*
-* Return : SET or RESET.
-*******************************************************************************/
-
-
-FlagStatus DMA_GetChannelActiveStatus( DMA_Channel_TypeDef * DMA_Channelx )
-
-{
-
- if ( ( DMA_Channelx->CCNF & DMA_ChannelActive) != RESET )
- {
- return SET; /* The DMA_Channelx FIFO has data */
- }
-
- else
-
- {
-
- return RESET; /* No data in the DMA_Channelx FIFO */
-
-
- }
-
-}
-
-
-/********************************************************************************
-* Function Name : DMA_DeInit
-* Description : Initializes the DMA peripheral registers to their default reset values.
-*
-*
-* Input : None
-*
-* Output : None.
-*
-* Called Functions:
-*
-* - SCU_AHBPeriphReset: Function defined in the System clock Unit "scu.c".
-*
-*
-* Return : None
-*******************************************************************************/
-
-
-void DMA_DeInit(void)
-
-{
-
- SCU_AHBPeriphReset(__DMA, ENABLE); /*DMA peripheral is under Reset " Reset on"*/
- SCU_AHBPeriphReset(__DMA, DISABLE); /*DMA peripheral Reset off*/
-}
-
-
-
-/********************************************************************************
-* Function Name : DMA_StructInit
-* Description : Fills each DMA_InitStruct member with its reset value.
-* Input :
-* -DMA_InitStruct: pointer to a DMA_InitTypeDef structure which will be initialized.
-*
-* Output : None.
-*
-* Return : None
-*******************************************************************************/
-
-
-void DMA_StructInit(DMA_InitTypeDef * DMA_InitStruct)
-
-{
-
- /* Initialize The current source address */
- DMA_InitStruct-> DMA_Channel_SrcAdd =0x0000000;
-
-
- /* Initialize The current Destination address */
- DMA_InitStruct->DMA_Channel_DesAdd=0x00000000;
-
-
-
- /* Initialize The Linked List Items */
- DMA_InitStruct->DMA_Channel_LLstItm=0x00000000 ;
-
-
-
- /* Initialize The Destination width */
- DMA_InitStruct->DMA_Channel_DesWidth= DMA_DesWidth_Byte;
-
-
-
- /* Initialize The source width */
- DMA_InitStruct->DMA_Channel_SrcWidth= DMA_SrcWidth_Byte;
-
-
- /* Initialize The Burst Size for the Destination */
- DMA_InitStruct->DMA_Channel_DesBstSize= DMA_DesBst_1Data; /* 1 Data "one Data can be byte, halfword or word depending on the Destination width */
-
-
-
- /* Initialize The Burst Size for the Source*/
- DMA_InitStruct->DMA_Channel_SrcBstSize= DMA_SrcBst_1Data; /* 1 Data "one Data can be byte, halfword or word depending on the source width */
-
- /* Initialize The Flow control and transfer type for the DMA transfer */
- DMA_InitStruct->DMA_Channel_FlowCntrl=DMA_FlowCntrlt0_DMA; /* memory to memory transfer with DMA as flow controller */
-
-
- /* Initialize The Transfer Size */
- DMA_InitStruct->DMA_Channel_TrsfSize =0x00;
-
-
-
- /* Initialize the DMA source request peripheral :"This field is ignored if the source of the transfer is from memory" */
- DMA_InitStruct->DMA_Channel_Src =0x00;
-
-
-
- /* Initialize the DMA Destination request peripheral :"This field is ignored if the destination of the transfer is to memory.*/
-
- DMA_InitStruct->DMA_Channel_Des=0x00;
-
-
-}
-
-
-
-
-/********************************************************************************
-* Function Name : DMA_Init
-* Description : Initializes the DMA_Channelx according to the specified parameters
-* in the DMA_InitStruct .
-*
-* Input :
-* -DMA_Channelx: where x can be 0,1,2,3,4,5,6,or 7 to select the DMA Channel.
-* -DMA_InitStruct: pointer to a DMA_InitTypeDef structure
-* ( Structure Config to be load in DMA Registers). .
-*
-* Output : None.
-*
-* Return : None
-*******************************************************************************/
-
-
-void DMA_Init(DMA_Channel_TypeDef * DMA_Channelx, DMA_InitTypeDef * DMA_InitStruct)
-
-{
-
-
-
- /* Select the DMA source peripheral request */
- DMA_Channelx->CCNF &= SRC_Mask;
- DMA_Channelx->CCNF |= DMA_InitStruct->DMA_Channel_Src;
-
-
- /* Select the flow controller and the transfer type */
- DMA_Channelx->CCNF &= DMA_FlowCntrl_Mask;
- DMA_Channelx->CCNF |=DMA_InitStruct->DMA_Channel_FlowCntrl;
-
-
- /* Select the DMA Destination peripheral request*/
- DMA_Channelx->CCNF &= DES_Mask;
- DMA_Channelx->CCNF |= DMA_InitStruct->DMA_Channel_Des;
-
- /* Set the source address */
- DMA_Channelx->SRC = DMA_InitStruct-> DMA_Channel_SrcAdd ;
-
-
- /* Set the destination address */
-
- DMA_Channelx->DES = DMA_InitStruct->DMA_Channel_DesAdd ;
-
-
-
- /* Set the linked list Items address */
- DMA_Channelx->LLI = DMA_InitStruct->DMA_Channel_LLstItm ;
-
-
- /* Set The Destination width */
- DMA_Channelx->CC &= DMA_Width_DES_MASK;
- DMA_Channelx->CC |= DMA_InitStruct->DMA_Channel_DesWidth;
-
-
- /* Set The Source width */
- DMA_Channelx->CC &= DMA_Width_SRC_MASK;
- DMA_Channelx->CC |= DMA_InitStruct->DMA_Channel_SrcWidth;
-
- /* Set The Burst Size for the Destination */
- DMA_Channelx->CC &= DMA_Bst_DES_MASK;
- DMA_Channelx->CC |= DMA_InitStruct->DMA_Channel_DesBstSize;
-
- /* Set The Burst Size for the Source */
- DMA_Channelx->CC &= DMA_Bst_SRC_MASK;
- DMA_Channelx->CC |=DMA_InitStruct->DMA_Channel_SrcBstSize;
-
-
- /* Initialize The Transfer Size for the Source */
- DMA_Channelx->CC &= DMA_TrsfSisze_Mask;
- DMA_Channelx->CC |= DMA_InitStruct->DMA_Channel_TrsfSize;
-
-
-}
-
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/src/91x_emi.c b/uc_str912/prj_template91x/str91x_lib/src/91x_emi.c deleted file mode 100644 index deadae8..0000000 --- a/uc_str912/prj_template91x/str91x_lib/src/91x_emi.c +++ /dev/null @@ -1,167 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_emi.c
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file provides all the EMI software functions.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_emi.h"
-#include "91x_scu.h"
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-
-/* These constant variables are used as masks to handle the EMI registers. */
-
-#define EMI_PageModeRead_TL_Mask 0xFFFFF3FF
-#define EMI_PageModeRead_Sel_Mask 0xFFFFFEFF
-#define EMI_MemWidth_Mask 0xFFFFFFCF
-#define EMI_WriteProtect_Mask 0xFFFFFEF7
-
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Registers reset value */
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/******************************************************************************
-* Function Name : EMI_DeInit
-* Description : Deinitializes the EMI peripheral registers to their default
-* reset values.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-
-void EMI_DeInit(void)
-{
-
- SCU_AHBPeriphReset(__EMI, ENABLE); /* EMI peripheral under Reset */
- SCU_AHBPeriphReset(__EMI,DISABLE ); /* EMI not under Reset */
-
-}
-
-/*******************************************************************************
-* Function Name : EMI_StructInit
-* Description : Fills the EMI_InitTypeDef structure member with its reset
-* value.
-* Input : EMI_InitStruct : pointer to a EMI_InitTypeDef structure
-* which will be initialized.
-* Output : None
-* Return : None
-*******************************************************************************/
-
-void EMI_StructInit( EMI_InitTypeDef *EMI_InitStruct)
-{
-
- /* Number of bus turnaround cycles added between read and write accesses.*/
- /*This member can be 0x01,0x02,0x03, ....0xF (Reset value:0xF "15 cycles"*/
-
- EMI_InitStruct->EMI_Bank_IDCY =0xF;
-
-
- /* Number of wait states for read accesses*/
- /*This member can be: 0x01,0x02,0x03, ....0x1F (Reset value:0x1F "31 cycles"*/
-
- EMI_InitStruct->EMI_Bank_WSTRD =0x1F;
-
-
- /* Number of wait states for write accesses*/
- /*This member can be: 0x01,0x02,0x03, ....0x1F (Reset value:0x1F "31 cycles"*/
-
- EMI_InitStruct->EMI_Bank_WSTWR =0x1F;
-
- /*Output enable assertion delay from chip select assertion*/
- /*This member can be: 0x01,0x02,0x03, ....0xF (Reset value:0x01 "1 cycle"*/
-
- EMI_InitStruct->EMI_Bank_WSTROEN =0x01;
-
-
- /*Write enable assertion delay from chip select assertion*/
- /*This member can be: 0x01,0x02,0x03, ....0xF (Reset value:0x00 "0 cycle"*/
-
- EMI_InitStruct->EMI_Bank_WSTWEN =0x00;
-
-
- /*This member Controls the memory width*/
- /*This member can be :"EMI_Width_Byte" = 8 bits width or "EMI_Width_HalfWord" = 16 bits width*/
-
- EMI_InitStruct->EMI_Bank_MemWidth = EMI_Width_Byte;
-
-
- /*Write protection feature */
- /*This member can be :"EMI_Bank_NonWriteProtect" = No write protection or "EMI_Bank_WriteProtect" = bank is write protected*/
-
- EMI_InitStruct-> EMI_Bank_WriteProtection= EMI_Bank_NonWriteProtect;
-
-
- /* page transfer length for page mode read */
- /*This member can be :"EMI_4Data" = 4 transfers burst or "EMI_8Data" = 8 transfers burst*/
-
- EMI_InitStruct->EMI_PageModeRead_TransferLength= EMI_4Data;
-
- /*Select or deselect the page mode read*/
- /*This member can be :"EMI_NormalMode" =Normal Mode or "EMI_PageModeRead" = Page Mode Read*/
-
- EMI_InitStruct->EMI_PageModeRead_Selection = EMI_NormalMode;
-
-
-}
-
-/*******************************************************************************
-* Function Name : EMI_Init
-* Description : Initializes EMI peripheral according to the specified
-* parameters in the EMI_InitStruct.
-
-* Input : EMI_Bankx:where x can be 0,1,2 or 3 to select the EMI Bank.
- EMI_InitStruct: pointer to a EMI_InitTypeDef structure
- ( Structure Config to be loaded in EMI Registers). .
-
-* Output : None
-* Return : None
-*******************************************************************************/
-
-void EMI_Init( EMI_Bank_TypeDef* EMI_Bankx, EMI_InitTypeDef* EMI_InitStruct)
-
-{
-
- EMI_Bankx->ICR = EMI_InitStruct-> EMI_Bank_IDCY ;
-
- EMI_Bankx->RCR = EMI_InitStruct->EMI_Bank_WSTRD ;
-
- EMI_Bankx->WCR = EMI_InitStruct->EMI_Bank_WSTWR ;
-
- EMI_Bankx->OECR = EMI_InitStruct->EMI_Bank_WSTROEN;
-
- EMI_Bankx->WECR = EMI_InitStruct->EMI_Bank_WSTWEN ;
-
- EMI_Bankx->BCR &= EMI_MemWidth_Mask;
- EMI_Bankx->BCR |= EMI_InitStruct->EMI_Bank_MemWidth;
-
- EMI_Bankx->BCR &= EMI_WriteProtect_Mask;
- EMI_Bankx->BCR |= EMI_InitStruct->EMI_Bank_WriteProtection;
-
- EMI_Bankx->BCR &= EMI_PageModeRead_TL_Mask;
- EMI_Bankx->BCR |= EMI_InitStruct->EMI_PageModeRead_TransferLength;
-
- EMI_Bankx->BCR &= EMI_PageModeRead_Sel_Mask;
- EMI_Bankx->BCR |= EMI_InitStruct->EMI_PageModeRead_Selection;
-
-
-}
-
-
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/src/91x_fmi.c b/uc_str912/prj_template91x/str91x_lib/src/91x_fmi.c deleted file mode 100644 index fb558ad..0000000 --- a/uc_str912/prj_template91x/str91x_lib/src/91x_fmi.c +++ /dev/null @@ -1,519 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_fmi.c
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file provides all the FMI software functions.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
-* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-
-/* Standard include ----------------------------------------------------------*/
-#include "91x_fmi.h"
-
-/* Include of other module interface headers ---------------------------------*/
-/* Local includes ------------------------------------------------------------*/
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-
-#define TIMEOUT 0xFFFFFF /* Timeout value */
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Interface functions -------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-
-/*******************************************************************************
-* Function Name : FMI_BankRemapConfig
-* Description : Configure the addresses and sizes of bank 0 and bank 1.
-* Input1 : FMI_BootBankSize: specifies the boot bank size.
-* This parameter can be one of the following values:
-* - 0x0: 32KBytes.
-* - 0x1: 64KBytes.
-* - 0x2: 128KBytes.
-* - 0x3: 256KBytes.
-* - 0x4: 512KBytes.
-* ....
-* - 0xB: 64MBytes.
-* Input2 : FMI_NonBootBankSize: specifies the non boot bank size.
-* This parameter can be one of the following values:
-* - 0x0: 8KBytes.
-* - 0x1: 16KBytes.
-* - 0x2: 32KBytes.
-* - 0x3: 64KBytes.
-* ....
-* - 0xD: 64MBytes.
-* Input3 : FMI_BootBankAddress: specifies the address of the boot bank.
-* Input4 : FMI_NonBootBankAddress: specifies the address of the non
-* boot bank.
-* Output : None
-* Return : None
-*******************************************************************************/
-void FMI_BankRemapConfig(u8 FMI_BootBankSize, u8 FMI_NonBootBankSize, \
- u32 FMI_BootBankAddress, u32 FMI_NonBootBankAddress)
-{
- FMI->BBSR = FMI_BootBankSize;
- FMI->NBBSR = FMI_NonBootBankSize;
- FMI->BBADR = (FMI_BootBankAddress >> 2);
- FMI->NBBADR = (FMI_NonBootBankAddress >> 2);
- FMI->CR |= 0x18; /* Enable bank 1 */
-}
-
-/*******************************************************************************
-* Function Name : FMI_Config
-* Description : Configure the FMI.
-* Input1 : FMI_ReadWaitState: specifies the needed read wait states.
-* This parameter can be one of the following values:
-* - FMI_READ_WAIT_STATE_1: One read wait state.
-* - FMI_READ_WAIT_STATE_2: Two read wait states.
-* - FMI_READ_WAIT_STATE_3: Three read wait states.
-* Input2 : FMI_WriteWaitState: specifies the needed write wait states.
-* This parameter can be one of the following values:
-* - FMI_WRITE_WAIT_STATE_1: One write wait state.
-* - FMI_WRITE_WAIT_STATE_2: Two write wait states.
-* Input3 : FMI_PWD: specifies the power down mode status.
-* This parameter can be one of the following values:
-* - FMI_PWD_ENABLE: Enable the PWD.
-* - FMI_PWD_DISABLE: Disable the PWD.
-* Input4 : FMI_LVDEN: specifies the low voltage detector status.
-* This parameter can be one of the following values:
-* - FMI_LVD_ENABLE: Enable the LVD.
-* - FMI_LVD_DISABLE: Disable the LVD.
-* Input5 : FMI_FreqRange: specifies the working frequency range.
-* This parameter can be one of the following values:
-* - FMI_FREQ_LOW: Low working frequency (up to 66MHz).
-* - FMI_FREQ_HIGH: High working frequency (above 66MHz) .
-* Output : None
-* Return : None
-*******************************************************************************/
-void FMI_Config(u16 FMI_ReadWaitState, u32 FMI_WriteWaitState, u16 FMI_PWD,\
- u16 FMI_LVDEN, u16 FMI_FreqRange)
-{
- /* Configure the write wait state value */
- if (FMI_WriteWaitState == FMI_WRITE_WAIT_STATE_1)
- {
- FMI->CR |= FMI_WRITE_WAIT_STATE_1;
- }
- else
- {
- FMI->CR &= FMI_WRITE_WAIT_STATE_0;
- }
-
- /* Write a write flash configuration register command */
- *(vu16 *)FMI_BANK_1 = 0x60;
-
- /* Configure the flash configuration register */
- *(vu16 *)(FMI_BANK_1|FMI_ReadWaitState|FMI_PWD|FMI_LVDEN|FMI_FreqRange) = 0x03;
-}
-
-/*******************************************************************************
-* Function Name : FMI_EraseSector
-* Description : Erase the needed sector.
-* Input : FMI_Sector: specifies the sector to be erased.
-* This parameter can be one of the following values:
-* - FMI_B0S0: FMI bank 0 sector 0.
-* - FMI_B0S1: FMI bank 0 sector 1.
-* - FMI_B0S2: FMI bank 0 sector 2.
-* - FMI_B0S3: FMI bank 0 sector 3.
-* - FMI_B0S4: FMI bank 0 sector 4.
-* - FMI_B0S5: FMI bank 0 sector 5.
-* - FMI_B0S6: FMI bank 0 sector 6.
-* - FMI_B0S7: FMI bank 0 sector 7.
-* - FMI_B1S0: FMI bank 1 sector 0.
-* - FMI_B1S1: FMI bank 1 sector 1.
-* - FMI_B1S2: FMI bank 1 sector 2.
-* - FMI_B1S3: FMI bank 1 sector 3.
-* Output : None
-* Return : None
-*******************************************************************************/
-void FMI_EraseSector(vu32 FMI_Sector)
-{
- /* Write an erase set-up command to the sector */
- *(vu16 *)FMI_Sector = 0x20;
-
- /* Write an erase confirm command to the sector */
- *(vu16 *)FMI_Sector = 0xD0;
-}
-
-/*******************************************************************************
-* Function Name : FMI_EraseBank
-* Description : Erase the needed bank.
-* Input : FMI_Bank: specifies the bank to be erased.
-* This parameter can be one of the following values:
-* - FMI_BANK_0: FMI bank 0.
-* - FMI_BANK_1: FMI bank 1.
-* Output : None
-* Return : None
-*******************************************************************************/
-void FMI_EraseBank(vu32 FMI_Bank)
-{
- /* Write a bank erase set-up command to the bank */
- *(vu16 *)FMI_Bank = 0x80;
-
- /* Write an erase confirm command to the sector */
- *(vu16 *)FMI_Bank = 0xD0;
-}
-
-/*******************************************************************************
-* Function Name : FMI_WriteHalfWord
-* Description : Write a halfword to the needed Flash memory address.
-* Input 1 : FMI_Address: specifies the address offset where the data will
-* be written.
-* Input 2 : FMI_Data: the needed data.
-* Output : None
-* Return : None
-*******************************************************************************/
-void FMI_WriteHalfWord(u32 FMI_Address, u16 FMI_Data)
-{
- /* Write a program command to the sector to be written */
- *(vu16 *)(FMI_Address & 0xFFFFFFFC) = 0x40;
-
- /* Write the halfword to the destination address */
- *(vu16 *)FMI_Address = FMI_Data;
-}
-
-/*******************************************************************************
-* Function Name : FMI_WriteOTPHalfWord
-* Description : Write a halfword to the needed OTP sector address.
-* Input 1 : FMI_OTPHWAddress: specifies the halfword address offset
-* where the data will be written.
-* This parameter can be one of the following values:
-* - FMI_OTP_LOW_HALFWORD_0: OTP Low halfword 0.
-* - FMI_OTP_HIGH_HALFWORD_0: OTP High halfword 0.
-* - FMI_OTP_LOW_HALFWORD_1: OTP Low halfword 1.
-* - FMI_OTP_HIGH_HALFWORD_1: OTP High halfword 1.
-* - FMI_OTP_LOW_HALFWORD_2: OTP Low halfword 2.
-* - FMI_OTP_HIGH_HALFWORD_2: OTP High halfword 2.
-* - FMI_OTP_LOW_HALFWORD_3: OTP Low halfword 3.
-* - FMI_OTP_HIGH_HALFWORD_3: OTP High halfword 3.
-* - FMI_OTP_LOW_HALFWORD_4: OTP Low halfword 4.
-* - FMI_OTP_HIGH_HALFWORD_4: OTP High halfword 4.
-* - FMI_OTP_LOW_HALFWORD_5: OTP Low halfword 5.
-* - FMI_OTP_HIGH_HALFWORD_5: OTP High halfword 5.
-* - FMI_OTP_LOW_HALFWORD_6: OTP Low halfword 6.
-* - FMI_OTP_HIGH_HALFWORD_6: OTP High halfword 6.
-* - FMI_OTP_LOW_HALFWORD_7: OTP Low halfword 7.
-* - FMI_OTP_HIGH_HALFWORD_7: OTP High halfword 7.
-* Input 2 : FMI_OTPData: The needed OTP data.
-* Output : None
-* Return : None
-*******************************************************************************/
-void FMI_WriteOTPHalfWord(u8 FMI_OTPHWAddress, u16 FMI_OTPData)
-{
- /* Write a write OTP command to the needed address */
- *(vu16 *)(FMI_BANK_1) = 0xC0;
-
- /* Write the halfword to the destination address */
- *(vu16 *)(FMI_BANK_1 + FMI_OTPHWAddress) = FMI_OTPData;
-}
-
-/*******************************************************************************
-* Function Name : FMI_ReadWord
-* Description : Read the correspondent data.
-* Input : FMI_Address: specifies the needed address.
-* Output : None
-* Return : The data contained in the specified address.
-*******************************************************************************/
-u32 FMI_ReadWord(u32 FMI_Address)
-{
- return(*(u32*)FMI_Address);
-}
-
-/*******************************************************************************
-* Function Name : FMI_ReadOTPData
-* Description : Read data from the OTP sector.
-* Input : FMI_OTPAddress: specifies the address of the data to be read.
-* This parameter can be one of the following values:
-* - FMI_OTP_WORD_0: FMI bank 0 sector 0.
-* - FMI_OTP_WORD_1: FMI bank 0 sector 1.
-* - FMI_OTP_WORD_2: FMI bank 0 sector 2.
-* - FMI_OTP_WORD_3: FMI bank 0 sector 3.
-* - FMI_OTP_WORD_4: FMI bank 0 sector 4.
-* - FMI_OTP_WORD_5: FMI bank 0 sector 5.
-* - FMI_OTP_WORD_6: FMI bank 0 sector 6.
-* - FMI_OTP_WORD_7: FMI bank 0 sector 7.
-* Output : None
-* Return : The needed OTP words.
-*******************************************************************************/
-u32 FMI_ReadOTPData(u8 FMI_OTPAddress)
-{
- u32 OTP_Data = 0x0;
- /* write a read OTP sector command */
- *(vu16 *)(FMI_BANK_1) = 0x98;
-
- /* Read the correspondent data */
- OTP_Data = (*(vu32*)(FMI_BANK_1 + FMI_OTPAddress));
-
- /* Write a read array command */
- *(vu16 *)(FMI_BANK_1) = 0xFF;
-
- return OTP_Data;
-}
-
-/*******************************************************************************
-* Function Name : FMI_GetFlagStatus
-* Description : Check whether the specified FMI flag is set or not.
-* Input1 : FMI_Flag: flag to check.
-* This parameter can be one of the following values:
-* - FMI_FLAG_SPS: Sector Protection Status Flag.
-* - FMI_FLAG_PSS: Program Suspend Status Flag.
-* - FMI_FLAG_PS: Program Status Flag.
-* - FMI_FLAG_ES: Erase Status Flag.
-* - FMI_FLAG_ESS: Erase Suspend Status Flag.
-* - FMI_FLAG_PECS: FPEC Status Flag.
-* Input2 : FMI_Bank: specifies the needed bank.
-* This parameter can be one of the following values:
-* - FMI_BANK_0: FMI bank 0.
-* - FMI_BANK_1: FMI bank 1.
-* Output : None
-* Return : None
-*******************************************************************************/
-FlagStatus FMI_GetFlagStatus(u8 FMI_Flag, vu32 FMI_Bank)
-{
- u16 FMI_Status_Register = 0;
-
- /* Write a read status register command */
- *(vu16 *)FMI_Bank = 0x70;
-
- /* Wait until operation completion */
- while(!((*(vu16 *)FMI_Bank) & 0x80));
-
- /* Read the status register */
- FMI_Status_Register = *(vu16 *)FMI_Bank;
-
- /* Write a read array command */
- *(vu16 *)FMI_Bank = 0xFF;
-
- if((FMI_Status_Register & FMI_Flag) != RESET)
- {
- return SET;
- }
- else
- {
- return RESET;
- }
-}
-
-/*******************************************************************************
-* Function Name : FMI_GetReadWaitStateValue
-* Description : Get the current Read wait state value.
-* Input : None
-* Output : None
-* Return : The current read wait states value.
-*******************************************************************************/
-u16 FMI_GetReadWaitStateValue(void)
-{
- u16 FMI_Configuration_Register = 0;
- /* Write a read flash configuration register command */
- *(vu16 *)FMI_BANK_1 = 0x90;
-
- /* Read the flash configuration register */
- FMI_Configuration_Register = *(vu16 *)(FMI_BANK_1 + 0x14);
-
- /* Write a read array command */
- *(vu16 *)FMI_BANK_1 = 0xFF;
-
- FMI_Configuration_Register = ((FMI_Configuration_Register>>11) + 1) & 0x3;
-
- /* Return the wait states value */
- return FMI_Configuration_Register;
-}
-
-/*******************************************************************************
-* Function Name : FMI_GetWriteWaitStateValue
-* Description : Get the current write wait state value.
-* Input : None
-* Output : None
-* Return : The current write wait states value.
-*******************************************************************************/
-u16 FMI_GetWriteWaitStateValue(void)
-{
- return ((u16)((FMI->CR & 0x100) >> 8));
-}
-
-/*******************************************************************************
-* Function Name : FMI_SuspendEnable
-* Description : Suspend command enable.
-* Input : FMI_Bank: specifies the bank to be suspended.
-* This parameter can be one of the following values:
-* - FMI_BANK_0: FMI bank 0.
-* - FMI_BANK_1: FMI bank 1.
-* Output : None
-* Return : None
-*******************************************************************************/
-void FMI_SuspendEnable(vu32 FMI_Bank)
-{
- /* Write a suspend command to the bank */
- *(vu16 *)FMI_Bank = 0xB0;
-}
-
-/*******************************************************************************
-* Function Name : FMI_ResumeEnable
-* Description : Resume the suspended command.
-* Input : FMI_Bank: specifies the suspended bank.
-* This parameter can be one of the following values:
-* - FMI_BANK_0: FMI bank 0.
-* - FMI_BANK_1: FMI bank 1.
-* Output : None
-* Return : None
-*******************************************************************************/
-void FMI_ResumeEnable(vu32 FMI_Bank)
-{
- /* Write a resume command to the bank */
- *(vu16 *)FMI_Bank = 0xD0;
-}
-
-/*******************************************************************************
-* Function Name : FMI_ClearFlag
-* Description : Clear the FMI Flags on the correspondent bank.
-* Input : FMI_Bank: specifies the needed bank.
-* This parameter can be one of the following values:
-* - FMI_BANK_0: FMI bank 0.
-* - FMI_BANK_1: FMI bank 1.
-* Output : None
-* Return : None
-*******************************************************************************/
-void FMI_ClearFlag(vu32 FMI_Bank)
-{
- /* Write a clear status register command */
- *(vu16 *)FMI_Bank = 0x50;
-}
-
-/*******************************************************************************
-* Function Name : FMI_WriteProtectionCmd
-* Description : Enable or disable the write protection for the needed sector.
-* Input1 : FMI_Sector: specifies the sector to be protected or
-* unprotected.
-* This parameter can be one of the following values:
-* - FMI_B0S0: FMI bank 0 sector 0.
-* - FMI_B0S1: FMI bank 0 sector 1.
-* - FMI_B0S2: FMI bank 0 sector 2.
-* - FMI_B0S3: FMI bank 0 sector 3.
-* - FMI_B0S4: FMI bank 0 sector 4.
-* - FMI_B0S5: FMI bank 0 sector 5.
-* - FMI_B0S6: FMI bank 0 sector 6.
-* - FMI_B0S7: FMI bank 0 sector 7.
-* - FMI_B1S0: FMI bank 1 sector 0.
-* - FMI_B1S1: FMI bank 1 sector 1.
-* - FMI_B1S2: FMI bank 1 sector 2.
-* - FMI_B1S3: FMI bank 1 sector 3.
-* Input2 : FMI_NewState: specifies the protection status.
-* This parameter can be one of the following values:
-* - ENABLE: Enable the protection.
-* - DISABLE: Disable the protection.
-* Output : None
-* Return : None
-*******************************************************************************/
-void FMI_WriteProtectionCmd(vu32 FMI_Sector, FunctionalState FMI_NewState)
-{
- if (FMI_NewState == ENABLE)
- {
- *(vu16*)FMI_Sector = 0x60;
- *(vu16*)FMI_Sector = 0x01;
- *(vu16*)FMI_Sector = 0xFF;
- }
- else /* DISABLE */
- {
- *(vu16*)FMI_Sector = 0x60;
- *(vu16*)FMI_Sector = 0xD0;
- *(vu16*)FMI_Sector = 0xFF;
- }
-}
-
-/*******************************************************************************
-* Function Name : FMI_GetWriteProtectionStatus
-* Description : Get the write protection status for the needed sector.
-* Input : FMI_Sector_Mask: specifies the needed sector mask.
-* This parameter can be one of the following values:
-* - FMI_B0S0_MASK: FMI bank 0 sector 0.
-* - FMI_B0S1_MASK: FMI bank 0 sector 1.
-* - FMI_B0S2_MASK: FMI bank 0 sector 2.
-* - FMI_B0S3_MASK: FMI bank 0 sector 3.
-* - FMI_B0S4_MASK: FMI bank 0 sector 4.
-* - FMI_B0S5_MASK: FMI bank 0 sector 5.
-* - FMI_B0S6_MASK: FMI bank 0 sector 6.
-* - FMI_B0S7_MASK: FMI bank 0 sector 7.
-* - FMI_B1S0_MASK: FMI bank 1 sector 0.
-* - FMI_B1S1_MASK: FMI bank 1 sector 1.
-* - FMI_B1S2_MASK: FMI bank 1 sector 2.
-* - FMI_B1S3_MASK: FMI bank 1 sector 3.
-* Output : None
-* Return : The Protection Status of the needed sector.
-* - RESET: The needed sector is not write protected.
-* - SET : The needed sector is write protected.
-*******************************************************************************/
-FlagStatus FMI_GetWriteProtectionStatus(u32 FMI_Sector_Mask)
-{
- u16 Protection_Level_1_Register = 0;
- /* Write a read flash protection level 1 register command */
- *(vu16 *)FMI_BANK_1 = 0x90;
-
- /* Read the flash protection level 1 register */
- Protection_Level_1_Register = *(vu16 *)(FMI_BANK_1 + 0x10);
-
- /* Write a read array command */
- *(vu16 *)FMI_BANK_1 = 0xFF;
-
- if (Protection_Level_1_Register &= FMI_Sector_Mask)
- {
- return SET;
- }
- else
- {
- return RESET;
- }
-}
-
-/*******************************************************************************
-* Function Name : FMI_WaitForLastOperation
-* Description : Wait until the last operation (Write halfword, Write OTP
-* halfword, Erase sector and Erase bank) completion.
-* Input : FMI_Bank: specifies the bank where the operation is on going.
-* This parameter can be one of the following values:
-* - FMI_BANK_0: FMI bank 0.
-* - FMI_BANK_1: FMI bank 1.
-* Output : None
-* Return : The timeout status.
-* This parameter can be one of the following values:
-* - FMI_TIME_OUT_ERROR: Timeout error occurred.
-* - FMI_NO_TIME_OUT_ERROR: No timeout error.
-*******************************************************************************/
-u8 FMI_WaitForLastOperation(vu32 FMI_Bank)
-{
- u32 Time_Out = 0;
-
- /* Write a read status register command */
- *(vu16 *)(FMI_Bank) = 0x70;
-
- /* Wait until operation compeletion */
- while((!((*(vu16 *)FMI_Bank) & 0x80))&&(Time_Out < TIMEOUT ))
- {
- Time_Out ++; /* Time Out */
- }
-
- /* Write a read array command */
- *(vu16 *)FMI_Bank = 0xFF;
-
- if (Time_Out == TIMEOUT)
- {
- return FMI_TIME_OUT_ERROR;
- }
- else
- {
- return FMI_NO_TIME_OUT_ERROR;
- }
-}
-
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/src/91x_gpio.c b/uc_str912/prj_template91x/str91x_lib/src/91x_gpio.c deleted file mode 100644 index f2d0941..0000000 --- a/uc_str912/prj_template91x/str91x_lib/src/91x_gpio.c +++ /dev/null @@ -1,407 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_gpio.c
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file provides all the GPIO software functions.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_gpio.h"
-#include "91x_scu.h"
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
- static u8 GPIO_GetGPIONumber(GPIO_TypeDef* GPIOx);
-
-/* Private functions ---------------------------------------------------------*/
-
-/*******************************************************************************
-* Function Name : GPIO_DeInit
-* Description : Deinitializes the GPIOx peripheral registers to their default
-* reset values.
-* Input : GPIOx: where x can be (0..9) to select the GPIO peripheral.
-* Output : None
-* Return : None
-*******************************************************************************/
-void GPIO_DeInit(GPIO_TypeDef* GPIOx)
-{
-
- /* Reset the GPIO registers values */
- if(GPIOx == GPIO0)
- {
- SCU_APBPeriphReset(__GPIO0,ENABLE);
- SCU_APBPeriphReset(__GPIO0,DISABLE);
- SCU->GPIOTYPE[0x00] = 0x0000 ;
- SCU->GPIOOUT[0x00] = 0x0000;
- SCU->GPIOIN[0x00] = 0x0000;
- }
-
- if(GPIOx == GPIO1)
- {
- SCU_APBPeriphReset(__GPIO1,ENABLE);
- SCU_APBPeriphReset(__GPIO1,DISABLE);
- SCU->GPIOTYPE[0x01] = 0x0000 ;
- SCU->GPIOOUT[0x01] = 0x0000;
- SCU->GPIOIN[0x01] = 0x0000;
- }
-
- if(GPIOx == GPIO2)
- {
- SCU_APBPeriphReset(__GPIO2,ENABLE);
- SCU_APBPeriphReset(__GPIO2,DISABLE);
- SCU->GPIOTYPE[0x02] = 0x0000 ;
- SCU->GPIOOUT[0x02] = 0x0000;
- SCU->GPIOIN[0x02] = 0x0000;
- }
-
- if(GPIOx == GPIO3)
- {
- SCU_APBPeriphReset(__GPIO3,ENABLE);
- SCU_APBPeriphReset(__GPIO3,DISABLE);
- SCU->GPIOTYPE[0x03] = 0x0000 ;
- SCU->GPIOOUT[0x03] = 0x0000;
- SCU->GPIOIN[0x03] = 0x0000;
- }
-
- if(GPIOx == GPIO4)
- {
- SCU_APBPeriphReset(__GPIO4,ENABLE);
- SCU_APBPeriphReset(__GPIO4,DISABLE);
- SCU->GPIOTYPE[0x04] = 0x0000 ;
- SCU->GPIOOUT[0x04] = 0x0000;
- SCU->GPIOIN[0x04] = 0x0000;
- SCU->GPIOANA = 0x00;
- }
-
- if(GPIOx == GPIO5)
- {
- SCU_APBPeriphReset(__GPIO5,ENABLE);
- SCU_APBPeriphReset(__GPIO5,DISABLE);
- SCU->GPIOTYPE[0x05] = 0x0000 ;
- SCU->GPIOOUT[0x05] = 0x0000;
- SCU->GPIOIN[0x05] = 0x0000;
- }
-
- if(GPIOx == GPIO6)
- {
- SCU_APBPeriphReset(__GPIO6,ENABLE);
- SCU_APBPeriphReset(__GPIO6,DISABLE);
- SCU->GPIOTYPE[0x06] = 0x0000 ;
- SCU->GPIOOUT[0x06] = 0x0000;
- SCU->GPIOIN[0x06] = 0x0000;
- }
-
- if(GPIOx == GPIO7)
- {
- SCU_APBPeriphReset(__GPIO7,ENABLE);
- SCU_APBPeriphReset(__GPIO7,DISABLE);
- SCU->GPIOOUT[0x07] = 0xAAAA;
- SCU->GPIOOUT[0x07] = 0x0000;
- SCU->GPIOIN[0x07] = 0x0000;
- }
-
- if(GPIOx == GPIO8)
- {
- SCU_APBPeriphReset(__GPIO8,ENABLE);
- SCU_APBPeriphReset(__GPIO8,DISABLE);
- SCU->GPIOEMI = 0x00;
- }
-
- if(GPIOx == GPIO9)
- {
- SCU_APBPeriphReset(__GPIO9,ENABLE);
- SCU_APBPeriphReset(__GPIO9,DISABLE);
- SCU->GPIOEMI = 0x00;
- }
-}
-/*******************************************************************************
-* Function Name : GPIO_Init
-* Description : Initializes the GPIOx peripheral according to the specified
-* parameters in the GPIO_InitStruct .
-* Input :- GPIOx: where x can be (0..9) to select the GPIO peripheral.
-* - GPIO_InitStruct: pointer to a GPIO_InitTypeDef structure that
-* contains the configuration information for the specified GPIO
-* peripheral.
-* Output : None
-* Return : None
-*******************************************************************************/
-void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct)
-{
- /* Select pin direction */
- u8 PinNumber = 0;
- u8 Counter = 0;
- u8 GPIO_Number = 0;
-
- GPIO_Number = GPIO_GetGPIONumber(GPIOx);
-
-
- if(GPIO_InitStruct->GPIO_Direction == GPIO_PinOutput)
- {
- GPIOx->DDR |= GPIO_InitStruct->GPIO_Pin;
- }
- else
- {
- GPIOx->DDR &= ~GPIO_InitStruct->GPIO_Pin;
- }
-
- for (Counter = 0; Counter < 8;Counter++)
- {
- /*Search pin number*/
- PinNumber = (GPIO_InitStruct->GPIO_Pin & (1 <<Counter));
- if((PinNumber >> Counter) == 1)
- {
- /*Output ALternate 0*/
- SCU->GPIOOUT[GPIO_Number] &= ~(0x3 <<(Counter *2));
- if(GPIO_InitStruct->GPIO_Alternate == GPIO_OutputAlt1)
- {
- /*Output ALternate 1*/
- SCU->GPIOOUT[GPIO_Number] |= 1 << (Counter *2);
- }
- if(GPIO_InitStruct->GPIO_Alternate == GPIO_OutputAlt2)
- {
- /*Output ALternate 2*/
- SCU->GPIOOUT[GPIO_Number] |= 0x2 << (Counter *2);
- }
- if(GPIO_InitStruct->GPIO_Alternate == GPIO_OutputAlt3)
- {
- /*Output ALternate 3*/
- SCU->GPIOOUT[GPIO_Number] |= 0x3 << (Counter *2);
- }
-
- /*Type configuration: PushPull or Open Collector*/
- SCU->GPIOTYPE[GPIO_Number] &= ~(0x1 << Counter) ;
- if(GPIO_InitStruct->GPIO_Type == GPIO_Type_OpenCollector)
- {
- /*Open Drain configuration*/
- SCU->GPIOTYPE[GPIO_Number] |= 0x1 << Counter;
- }
-
- /*IP Connected disable*/
- SCU->GPIOIN[GPIO_Number] &= ~(0x1 << Counter) ;
- if(GPIO_InitStruct->GPIO_IPConnected == GPIO_IPConnected_Enable)
- {
- /*IP Connected enable*/
- SCU->GPIOIN[GPIO_Number] |= 0x1 << Counter;
- }
- }
- }
-}
-
-/*******************************************************************************
-* Function Name : GPIO_StructInit
-* Description : Initialize the GPIO Init Structure parameters
-* Input : GPIO_InitStruct : pointer to a GPIO_InitTypeDef structure
-* which will be initialized.
-* Output : None
-* Return : None
-*******************************************************************************/
-void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct)
-{
- /* Reset GPIO init structure parameters values */
- GPIO_InitStruct->GPIO_Pin = GPIO_Pin_All;
- GPIO_InitStruct->GPIO_Direction = GPIO_PinInput;
- GPIO_InitStruct->GPIO_Type = GPIO_Type_PushPull;
- GPIO_InitStruct->GPIO_IPConnected = GPIO_IPConnected_Disable;
- GPIO_InitStruct->GPIO_Alternate = GPIO_InputAlt1;
-}
-
-/*******************************************************************************
-* Function Name : GPIO_ReadBit
-* Description : Reads the specified port pin
-* Input : - GPIOx: where x can be (0..9) to select the GPIO peripheral.
-* : - GPIO_Pin: the Pin number. This parameter can be GPIO_Pin_x
-* where x can be (0..7).
-* Output : None
-* Return : The port pin value
-*******************************************************************************/
-u8 GPIO_ReadBit(GPIO_TypeDef* GPIOx, u8 GPIO_Pin)
-{
- if ((((GPIOx->DR[GPIO_Pin<<2])) & GPIO_Pin) != Bit_RESET )
- {
- return Bit_SET;
- }
- else
- {
- return Bit_RESET;
- }
-}
-
-/*******************************************************************************
-* Function Name : GPIO_Read
-* Description : Reads the specified GPIO data port
-* Input : - GPIOx: where x can be (0..9) to select the GPIO peripheral.
-* Output : None
-* Return : GPIO data port word value.
-*******************************************************************************/
-u8 GPIO_Read(GPIO_TypeDef* GPIOx)
-{
- return (GPIOx->DR[0x3FC]);
-}
-
-/*******************************************************************************
-* Function Name : GPIO_WriteBit
-* Description : Sets or clears the selected data port bit.
-* Input : - GPIOx: where x can be (0..9) to select the GPIO peripheral.
-* - GPIO_Pin: the Pin number. This parameter can be GPIO_Pin_x
-* where x can be (0..7).
-* - BitVal: this parameter specifies the value to be written
-* to the selected bit.
-* BitVal must be one of the BitAction enum values:
-* - Bit_RESET: to clear the port pin
-* - Bit_SET: to set the port pin
-* Output : None
-* Return : None
-*******************************************************************************/
-void GPIO_WriteBit(GPIO_TypeDef* GPIOx, u8 GPIO_Pin, BitAction BitVal)
-{
- if(BitVal == Bit_SET)
- {
- GPIOx->DR[GPIO_Pin <<2] = GPIO_Pin;
- }
- else
- {
- GPIOx->DR[GPIO_Pin <<2] = 0x00;
- }
-}
-
-/*******************************************************************************
-* Function Name : GPIO_Write
-* Description : Writes the passed value in the selected data GPIOx port
-* register.
-* Input :- GPIOx: where x can be (0..9) to select the GPIO peripheral.
-* - PortVal: the value to be written to the data port register.
-* Output : None
-* Return : None
-*******************************************************************************/
-void GPIO_Write(GPIO_TypeDef* GPIOx, u8 PortVal)
-{
- GPIOx->DR[0x3FC] = PortVal;
-}
-
-/*******************************************************************************
-* Function Name : GPIO_EMIConfig
-* Description : Enables or disables GPIO 8 and 9 in EMI mode.
-* Input : - NewState: new state of the EMI.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None
-* Return : None
-*******************************************************************************/
-void GPIO_EMIConfig(FunctionalState NewState)
-{
- if(NewState == ENABLE)
- {
- SCU->GPIOEMI = 0x01;
- }
- else
- {
- SCU->GPIOEMI = 0x00;
- }
-}
-
-/*******************************************************************************
-* Function Name : GPIO_ANAPinConfig
-* Description : Enables or disables pins from GPIO 4 in Analogue mode.
-* Input :- GPIO_ANAChannel: selects the ADC channel pin.
-* This parameter can be one of the following values:
-* GPIO_ANAChannel0
-* GPIO_ANAChannel1
-* GPIO_ANAChannel2
-* GPIO_ANAChannel3
-* GPIO_ANAChannel4
-* GPIO_ANAChannel5
-* GPIO_ANAChannel6
-* GPIO_ANAChannel7
-* GPIO_ANAChannelALL
-* - NewState: new state of the port pin.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None
-* Return : None
-*******************************************************************************/
-void GPIO_ANAPinConfig(u8 GPIO_ANAChannel, FunctionalState NewState)
-{
-
- if(NewState == ENABLE)
- {
- if(GPIO_ANAChannel == GPIO_ANAChannelALL)
- {
- SCU->GPIOOUT[4] = 0x0000;
- SCU->GPIOIN[4] = 0x00;
- }
- else
- {
- SCU->GPIOOUT[4] &= ~(0x3<<(GPIO_ANAChannel-1));
- SCU->GPIOIN[4] &= ~GPIO_ANAChannel;
- }
- SCU->GPIOANA |= GPIO_ANAChannel;
-
- }
- else
- {
- SCU->GPIOANA &= ~GPIO_ANAChannel;
- }
-}
-
-/*******************************************************************************
-* Function Name : GPIO_GetGPIONumber
-* Description : searche the GPIO number.
-* Input : GPIOx: where x can be (0..9) to select the GPIO peripheral.
-* Output : None
-* Return : GPIO number
-*******************************************************************************/
-u8 GPIO_GetGPIONumber(GPIO_TypeDef* GPIOx)
-{
-
- if(GPIOx == GPIO1)
- {
- return 1;
- }
- if(GPIOx == GPIO2)
- {
- return 2;
- }
- if(GPIOx == GPIO3)
- {
- return 3;
- }
- if(GPIOx == GPIO4)
- {
- return 4;
- }
- if(GPIOx == GPIO5)
- {
- return 5;
- }
- if(GPIOx == GPIO6)
- {
- return 6;
- }
- if(GPIOx == GPIO7)
- {
- return 7;
- }
- if(GPIOx == GPIO8)
- {
- return 8;
- }
- if(GPIOx == GPIO9)
- {
- return 9;
- }
- return 0;
-}
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/src/91x_i2c.c b/uc_str912/prj_template91x/str91x_lib/src/91x_i2c.c deleted file mode 100644 index 9f15adb..0000000 --- a/uc_str912/prj_template91x/str91x_lib/src/91x_i2c.c +++ /dev/null @@ -1,616 +0,0 @@ -/******************** (C) COPYRIGHT 2005 STMicroelectronics ********************
-* File Name : 91x_i2c.c
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file provides all the I2C software functions.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_i2c.h"
-#include "91x_scu.h"
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-
-/* I2C IT enable */
-#define I2C_IT_Enable 0x01
-#define I2C_IT_Disable 0xFE
-
-/* I2C Peripheral Enable/Disable */
-#define I2C_PE_Set 0x20
-#define I2C_PE_Reset 0xDF
-
-/* Address direction bit */
-#define I2C_ADD0_Set 0x01
-#define I2C_ADD0_Reset 0xFE
-
-/* I2C START Enable/Disable */
-#define I2C_Start_Enable 0x08
-#define I2C_Start_Disable 0xF7
-
-/* I2C STOP Enable/Disable */
-#define I2C_Stop_Enable 0x02
-#define I2C_Stop_Disable 0xFD
-
-/* I2C Masks */
-#define I2C_Frequency_Mask 0x1F
-#define I2C_AddressHigh_Mask 0xF9
-#define I2C_OwnAddress_Mask 0x0300
-#define I2C_StandardMode_Mask 0x7f
-#define I2C_FastMode_Mask 0x80
-#define I2C_Event_Mask 0x3FFF
-#define I2C_HeaderSet_Mask 0xF1
-#define I2C_HeaderReset_Mask 0xFE
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/*******************************************************************************
-* Function Name : I2C_DeInit
-* Description : Deinitializes the I2C peripheral registers to their default
-* reset values.
-* Input :- I2Cx: I2C peripheral can be:
-* - I2C0
-* - I2C1
-* Output : None
-* Return : None
-*******************************************************************************/
-void I2C_DeInit(I2C_TypeDef* I2Cx)
-{
- if (I2Cx == I2C0)
- {
- /* Reset the I2C0 registers values */
- SCU_APBPeriphReset(__I2C0, ENABLE);
- SCU_APBPeriphReset(__I2C0, DISABLE);
- }
- if (I2Cx == I2C1)
- {
- /* Reset the I2C1 registers values */
- SCU_APBPeriphReset(__I2C1, ENABLE);
- SCU_APBPeriphReset(__I2C1, DISABLE);
- }
-}
-
-/*******************************************************************************
-* Function Name : I2C_Init
-* Description : Initializes the I2C peripheral according to the specified
-* parameters in the I2C_InitTypeDef structure.
-* Input :- I2Cx: I2C peripheral can be:
-* - I2C0
-* - I2C1
-*
-* - I2C_InitStruct: pointer to an I2C_InitTypeDef structure that
-* contains the configuration information for the specified I2C
-* peripheral.
-* Output : None
-* Return : None
-*******************************************************************************/
-void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct)
-{
- u16 wResult = 0x0F;
- u32 dPCLK = 25000000;
-
- /* Get PCLK frequency value */
- dPCLK = SCU_GetPCLKFreqValue()*1000;
- /* Disable I2C peripheral to set FR[2:0] bits */
- I2C_Cmd (I2Cx, DISABLE);
- /* Clear frequency FR[2:0] bits */
- I2Cx->OAR2 &= I2C_Frequency_Mask;
- /* Set frequency bits depending on PCLK value */
- if ((dPCLK <1667000) & (dPCLK > 10000000))
- I2Cx->OAR2 |= 0x20;
- else if (dPCLK < 26670000)
- I2Cx->OAR2 |= 0x40;
- else if (dPCLK < 40000000)
- I2Cx->OAR2 |= 0x60;
- else if (dPCLK < 53330000)
- I2Cx->OAR2 |= 0x80;
- else if (dPCLK < 66000000)
- I2Cx->OAR2 |= 0xA0;
- else if (dPCLK < 80000000)
- I2Cx->OAR2 |= 0xC0;
- else if (dPCLK < 100000000)
- I2Cx->OAR2 |= 0xE0;
- I2C_Cmd (I2Cx, ENABLE);
-
- /* Configure general call */
- if (I2C_InitStruct->I2C_GeneralCall == I2C_GeneralCall_Enable)
- {
- /* Enable general call */
- I2Cx->CR |= I2C_GeneralCall_Enable;
- }
- else
- {
- /* Disable general call */
- I2Cx->CR &= I2C_GeneralCall_Disable;
- }
- /* Configure acknowledgement */
- if (I2C_InitStruct->I2C_Ack == I2C_Ack_Enable)
- {
- /* Enable acknowledgement */
- I2Cx->CR |= I2C_Ack_Enable;
- }
- else
- {
- /* Disable acknowledgement */
- I2Cx->CR &= I2C_Ack_Disable;
- }
-
- /* Configure LSB own address */
- I2Cx->OAR1 = I2C_InitStruct->I2C_OwnAddress;
- /* Clear MSB own address ADD[9:8] bits */
- I2Cx->OAR2 &= I2C_AddressHigh_Mask;
- /* Set MSB own address value */
- I2Cx->OAR2 |= (I2C_InitStruct->I2C_OwnAddress & I2C_OwnAddress_Mask)>>7;
-
- /* Configure speed in standard mode */
- if (I2C_InitStruct->I2C_CLKSpeed <= 100000)
- {
- /* Standard mode speed calculate */
- wResult = ((dPCLK/I2C_InitStruct->I2C_CLKSpeed)-7)/2;
- /* Set speed value and clear FM/SM bit for standard mode in LSB clock divider */
- I2Cx->CCR = wResult & I2C_StandardMode_Mask;
- }
- /* Configure speed in fast mode */
- else if (I2C_InitStruct->I2C_CLKSpeed <= 400000)
- {
- /* Fast mode speed calculate */
- wResult = ((dPCLK/I2C_InitStruct->I2C_CLKSpeed)-9)/3;
- /* Set speed value and set FM/SM bit for fast mode in LSB clock divider */
- I2Cx->CCR = wResult | I2C_FastMode_Mask;
- }
- /* Set speed in MSB clock divider */
- I2Cx->ECCR = wResult >>7;
-}
-
-/*******************************************************************************
-* Function Name : I2C_StructInit
-* Description : Initialize the I2C Init Structure parameters
-* Input : - I2C_InitStruct: pointer to an I2C_InitTypeDef structure
- which will be initialized.
-* Output : None
-* Return : None.
-*******************************************************************************/
-void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct)
-{
- /* Initialize the I2C_CLKSpeed member */
- I2C_InitStruct->I2C_CLKSpeed = 5000;
-
- /* Initialize the I2C_OwnAddress member */
- I2C_InitStruct->I2C_OwnAddress = 0x0;
-
- /* Initialize the I2C_GeneralCall member */
- I2C_InitStruct->I2C_GeneralCall = I2C_GeneralCall_Disable;
-
- /* Initialize the I2C_Ack member */
- I2C_InitStruct->I2C_Ack = I2C_Ack_Disable;
-}
-
-/*******************************************************************************
-* Function Name : I2C_Cmd
-* Description : Enables or disables the specified I2C peripheral.
-* Input :- I2Cx: I2C peripheral can be:
-* - I2C0
-* - I2C1
-* - NewState: new state of the I2C peripheral. This parameter
-* can be: ENABLE or DISABLE.
-* Output : None
-* Return : None.
-*******************************************************************************/
-void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
-{
- if (NewState == ENABLE)
- {
- /* Enable the I2C peripheral by setting twice the PE bit on the CR register */
- I2Cx->CR |= I2C_PE_Set;
- I2Cx->CR |= I2C_PE_Set;
- }
- else
- {
- /* Disable the I2C peripheral */
- I2Cx->CR &= I2C_PE_Reset;
- }
-}
-
-/*******************************************************************************
-* Function Name : I2C_GenerateSTART
-* Description : Generates I2C communication START condition.
-* Input :- I2Cx: I2C peripheral can be:
-* - I2C0
-* - I2C1
-*
-* - NewState: new state of the Start condition. This parameter
-* can be: ENABLE or DISABLE.
-* Output : None
-* Return : None.
-*******************************************************************************/
-void I2C_GenerateStart(I2C_TypeDef* I2Cx, FunctionalState NewState)
-{
- if (NewState == ENABLE)
- {
- /* Generate a START condition */
- I2Cx->CR |= I2C_Start_Enable;
- }
- else
- {
- /* Disable the START condition generation */
- I2Cx->CR &= I2C_Start_Disable;
- }
-}
-
-/*******************************************************************************
-* Function Name : I2C_GenerateSTOP
-* Description : Generates I2C communication STOP condition.
-* Input :- I2Cx: I2C peripheral can be:
-* - I2C0
-* - I2C1
-*
-* - NewState: new state of the Stop condition. This parameter
-* can be: ENABLE or DISABLE.
-* Output : None
-* Return : None.
-*******************************************************************************/
-void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState)
-{
- if (NewState == ENABLE)
- {
- /* Generate a SIOP condition */
- I2Cx->CR |= I2C_Stop_Enable;
- }
- else
- {
- /* Disable the STOP condition generation */
- I2Cx->CR &= I2C_Stop_Disable;
- }
-}
-
-/*******************************************************************************
-* Function Name : I2C_AcknowledgeConfig
-* Description : Enables or disables I2C acknowledge feature.
-* Input :- I2Cx: I2C peripheral can be:
-* - I2C0
-* - I2C1
-* - NewState: new state of the Acknowledgement. This parameter
-* can be: ENABLE or DISABLE.
-* Output : None
-* Return : None.
-*******************************************************************************/
-void I2C_AcknowledgeConfig(I2C_TypeDef *I2Cx, FunctionalState NewState)
-{
- if (NewState == ENABLE)
- {
- /* Enable the acknowledgement */
- I2Cx->CR |= I2C_Ack_Enable;
- }
- else
- {
- /* Disable the acknowledgement */
- I2Cx->CR &= I2C_Ack_Disable;
- }
-}
-
-/*******************************************************************************
-* Function Name : I2C_ITConfig
-* Description : Enables or disables I2C interrupt feature.
-* Input :- I2Cx: I2C peripheral can be:
-* - I2C0
-* - I2C1
-* - NewState: new state of the specified I2C interrupt.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None
-* Return : None.
-*******************************************************************************/
-void I2C_ITConfig(I2C_TypeDef *I2Cx, FunctionalState NewState)
-{
- if (NewState == ENABLE)
- {
- /* Enable the I2C interrupt */
- I2Cx->CR |= I2C_IT_Enable;
- }
- else
- {
- /* Disable the I2C interrupt */
- I2Cx->CR &= I2C_IT_Disable;
- }
-}
-
-/*******************************************************************************
-* Function Name : I2C_ReadRegister
-* Description : Reads any I2C register and returns its value.
-* Input :- I2Cx: I2C peripheral can be:
-* - I2C0
-* - I2C1
-* - I2C_Register: the I2C register to be read. This parameter
-* can be one of the following values:
-* - I2C_CR: CR register.
-* - I2C_SR1: SR1 register.
-* - I2C_SR2: SR2 register.
-* - I2C_CCR: CCR register.
-* - I2C_OAR1: OAR1 register.
-* - I2C_OAR2: OAR2 register.
-* - I2C_DR: DR register.
-* - I2C_ECCR: ECCR register.
-* Output : None
-* Return : The value of the register passed as parameter
-*******************************************************************************/
-u8 I2C_ReadRegister(I2C_TypeDef* I2Cx, u8 I2C_Register)
-{
- /* Return the selected register value */
- if (I2Cx == I2C0)
- {
- return (*(u8 *)(I2C0_BASE + I2C_Register));
- }
- if (I2Cx == I2C1)
- {
- return (*(u8 *)(I2C1_BASE + I2C_Register));
- }
- return 0;
-}
-
-/*******************************************************************************
-* Function Name : I2C_GetFlagStatus
-* Description : Checks whether the specified I2C flag is set or not.
-* Input :- I2Cx: I2C peripheral can be:
-* - I2C0
-* - I2C1
-* - I2C_FLAG: flag to check. This parameter can be one of the
-* following values:
-* - I2C_FLAG_SB: Start bit flag
-* - I2C_FLAG_M_SL: Master/Slave flag
-* - I2C_FLAG_ADSL: Adress matched flag
-* - I2C_FLAG_BTF: Byte transfer finished flag
-* - I2C_FLAG_BUSY: Bus busy flag
-* - I2C_FLAG_TRA: Transmitter/Receiver flag
-* - I2C_FLAG_ADD10: 10-bit addressing in Master mode flag
-* - I2C_FLAG_EVF: Event flag
-* - I2C_FLAG_GCAL: General call flag
-* - I2C_FLAG_BERR: Bus error flag
-* - I2C_FLAG_ARLO: Arbitration lost flag
-* - I2C_FLAG_STOPF: Stop detection flag
-* - I2C_FLAG_AF: Acknowledge failure flag
-* - I2C_FLAG_ENDAD: End of address transmission flag
-* - I2C_FLAG_ACK: Acknowledge enable flag
-* Output : None
-* Return : The NewState of the I2C_Flag (SET or RESET).
-*******************************************************************************/
-FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, u16 I2C_FLAG)
-{
- u16 wFlag1=0, wFlag2=0, wTmp=0;
-
- wFlag1 = I2Cx->SR2;
- wFlag1 = wFlag1<<8;
- wFlag2 = I2Cx->CR & 0x04;
-
- /* Get all the I2C flags in a unique register*/
- wTmp = (((I2Cx->SR1 | (wFlag1)) & I2C_Event_Mask) | (wFlag2<<12));
-
- /* Check the status of the specified I2C flag */
- if((wTmp & I2C_FLAG) != RESET)
- {
- /* Return SET if I2C_FLAG is set */
- return SET;
- }
- else
- {
- /* Return RESET if I2C_FLAG is reset */
- return RESET;
- }
-}
-
-/*******************************************************************************
-* Function Name : I2C_ClearFlag
-* Description : Clears the I2C Flag passed as a parameter
-* Input :- I2Cx: I2C peripheral can be:
-* - I2C0
-* - I2C1
-* - I2C_FLAG: flag to check. This parameter can be one of the
-* following values:
-* - I2C_FLAG_SB: Start bit flag
-* - I2C_FLAG_M_SL: Master/Slave flag
-* - I2C_FLAG_ADSL: Adress matched flag
-* - I2C_FLAG_BTF: Byte transfer finished flag
-* - I2C_FLAG_BUSY: Bus busy flag
-* - I2C_FLAG_TRA: Transmitter/Receiver flag
-* - I2C_FLAG_ADD10: 10-bit addressing in Master mode flag
-* - I2C_FLAG_EVF: Event flag
-* - I2C_FLAG_GCAL: General call flag
-* - I2C_FLAG_BERR: Bus error flag
-* - I2C_FLAG_ARLO: Arbitration lost flag
-* - I2C_FLAG_STOPF: Stop detection flag
-* - I2C_FLAG_AF: Acknowledge failure flag
-* - I2C_FLAG_ENDAD: End of address transmission flag
-* - I2C_FLAG_ACK: Acknowledge enable flag
-* - parameter needed in the case that the flag to be cleared
-* need a write in one register
-* Output : None
-* Return : None.
-*******************************************************************************/
-void I2C_ClearFlag(I2C_TypeDef* I2Cx, u16 I2C_FLAG, ...)
-{
- u8 bTmp = (u8)*((u32 *) & I2C_FLAG + sizeof(I2C_FLAG));
-
- /* flags that need a read of the SR2 register to be cleared */
- if ((I2C_FLAG==I2C_FLAG_ADD10) || (I2C_FLAG==I2C_FLAG_EVF) || (I2C_FLAG==I2C_FLAG_BERR) || (I2C_FLAG==I2C_FLAG_ARLO) |
- (I2C_FLAG==I2C_FLAG_STOPF) ||(I2C_FLAG==I2C_FLAG_AF) || (I2C_FLAG==I2C_FLAG_ENDAD))
- {
- /* Read the SR2 register */
- I2Cx->SR2;
-
- /* Two flags need a second step to be cleared */
- switch (I2C_FLAG)
- {
- case I2C_FLAG_ADD10:
- /* Send the MSB 10bit address passed as second parameter */
- I2Cx->DR = bTmp;
- break;
- case I2C_FLAG_ENDAD:
- /* Write to the I2C_CR register by setting PE bit */
- I2Cx->CR |= I2C_PE_Set;
- break;
- }
- }
-
- /* flags that need a read of the SR1 register to be cleared */
- else if (I2C_FLAG==I2C_FLAG_SB || I2C_FLAG==I2C_FLAG_ADSL || I2C_FLAG==I2C_FLAG_BTF || I2C_FLAG==I2C_FLAG_TRA)
- {
- /* Read the SR1 register */
- (void)I2Cx->SR1;
-
- /* three flags need a second step to be cleared */
- if (I2C_FLAG == I2C_FLAG_SB)
- {
- /* Send the address byte passed as second parameter */
- I2Cx->DR = bTmp;
- }
- else if (I2C_FLAG==I2C_FLAG_BTF || I2C_FLAG==I2C_FLAG_TRA)
- {
- /* return the received byte in the variable passed as second parameter */
- bTmp=I2Cx->DR;
- }
- }
-
- /* flags that need to disable the I2C interface */
- else if ( I2C_FLAG==I2C_FLAG_M_SL || I2C_FLAG==I2C_FLAG_GCAL)
- {
- I2C_Cmd(I2Cx, DISABLE);
- I2C_Cmd(I2Cx, ENABLE);
- }
-}
-
-/*******************************************************************************
-* Function Name : I2C_Send7bitAddress
-* Description : Transmits the address byte to select the slave device.
-* Input :- I2Cx: I2C peripheral can be:
-* - I2C0
-* - I2C1
-* - Address: specifies the slave address which will be transmitted
-* - Direction: specifies whether the I2C device will be a
-* Transmitter or a Receiver. This parameter can be one of the
-* following values
-* - I2C_MODE_TRANSMITTER: Transmitter mode
-* - I2C_MODE_RECEIVER: Receiver mode
-* Output : None
-* Return : None.
-*******************************************************************************/
-void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, u8 Address, u8 Direction)
-{
- /* Test on the direction to define the read/write bit */
- if (Direction == I2C_MODE_RECEIVER)
- {
- /* Set the address bit0 for read */
- Address |= I2C_ADD0_Set;
- }
- else
- {
- /* Reset the address bit0 for write */
- Address &= I2C_ADD0_Reset;
- }
- /* Send the address */
- I2Cx->DR = Address;
-}
-
-/*******************************************************************************
-* Function Name : I2C_SendData
-* Description : Send a data byte.
-* Input :- I2Cx: I2C peripheral can be:
-* - I2C0
-* - I2C1
-* - bData : the byte to be sent
-* Output : None
-* Return : None.
-*******************************************************************************/
-void I2C_SendData(I2C_TypeDef* I2Cx, u8 bData)
-{
- /* Write in the DR register the byte to be sent */
- I2Cx->DR = bData;
-}
-
-/*******************************************************************************
-* Function Name : I2C_ReceiveData
-* Description : Read the received byte.
-* Input : - I2Cx: I2C peripheral can be:
-* - I2C0
-* - I2C1
-* Output : None
-* Return : The received byte
-*******************************************************************************/
-u8 I2C_ReceiveData(I2C_TypeDef* I2Cx)
-{
- /* Return from the DR register the received byte */
- return I2Cx->DR;
-}
-
-/*******************************************************************************
-* Function Name : I2C_GetLastEvent
-* Description : Get the Last happened I2C Event.
-* Input :- I2Cx: I2C peripheral can be:
-* - I2C0
-* - I2C1
-* Output : None
-* Return : The Last happened Event.
-*******************************************************************************/
-u16 I2C_GetLastEvent(I2C_TypeDef* I2Cx)
-{
- u16 wFlag1=0, wLastEvent=0;
- wFlag1 = I2Cx->SR2;
- wFlag1 = wFlag1<<8;
- /* Get the last event value from I2C status register */
- wLastEvent = (((I2Cx->SR1 | (wFlag1)) & I2C_Event_Mask));
- /* Return the last event */
- return wLastEvent;
-}
-
-/*******************************************************************************
-* Function Name : I2C_CheckEvent
-* Description : Checks whether the Last I2C Event is equal to the one passed
-* as parameter.
-* Input :- I2Cx: I2C peripheral can be:
-* - I2C0
-* - I2C1
-* - I2C_EVENT: the event to check. This parameter can be one of
-* the following values:
-* - I2C_EVENT_SLAVE_ADDRESS_MATCHED
-* - I2C_EVENT_SLAVE_BYTE_RECEIVED
-* - I2C_EVENT_SLAVE_BYTE_TRANSMITTED
-* - I2C_EVENT_MASTER_MODE_SELECT
-* - I2C_EVENT_MASTER_MODE_SELECTED
-* - I2C_EVENT_MASTER_BYTE_RECEIVED
-* - I2C_EVENT_MASTER_BYTE_TRANSMITTED
-* - I2C_EVENT_MASTER_MODE_ADDRESS10
-* - I2C_EVENT_SLAVE_STOP_DETECTED
-* - I2C_EVENT_SLAVE_ACK_FAILURE
-* Output : None
-* Return : An ErrorStatus enumuration value:
-* - SUCCESS: Last event is equal to the I2C_Event
-* - ERROR: Last event is different from the I2C_Event
-*******************************************************************************/
-ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx,u16 I2C_EVENT)
-{
- u16 wLastEvent = I2C_GetLastEvent(I2Cx);
-
- /* Check whther the last event is equal to I2C_EVENT */
- if (wLastEvent == I2C_EVENT)
- {
- /* Return SUCCESS when last event is equal to I2C_EVENT */
- return SUCCESS;
- }
- else
- {
- /* Return ERROR when last event is different from I2C_EVENT */
- return ERROR;
- }
-}
-
-/******************* (C) COPYRIGHT 2005 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/src/91x_lib.c b/uc_str912/prj_template91x/str91x_lib/src/91x_lib.c deleted file mode 100644 index 3fab413..0000000 --- a/uc_str912/prj_template91x/str91x_lib/src/91x_lib.c +++ /dev/null @@ -1,281 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_lib.c
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file provides all peripherals pointers
- : initialization.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
-* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-#define EXT
-
-/* Standard include ----------------------------------------------------------*/
-#include "91x_map.h"
-
-/* Include of other module interface headers ---------------------------------*/
-/* Local includes ------------------------------------------------------------*/
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Interface functions -------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-#ifdef LIBDEBUG
-
-/*******************************************************************************
-* Function Name : debug
-* Description : this function initialize peripherals pointers
-* Input : no one
-* Output : no one
-* Return : no one
-*******************************************************************************/
-void libdebug(void)
-{
-
-
-/************************* DMA *************************/
-
-#ifdef _DMA
- DMA = (DMA_TypeDef *)DMA_BASE;
-#endif /* _DMA */
-
-/************************* DMA *************************/
-
-
-#ifdef _DMA_Channel0
- DMA_Channel0= (DMA_Channel_TypeDef *)DMA_Channel0_BASE;
-#endif /* _DMA_Channel0 */
-
-#ifdef _DMA_Channel1
- DMA_Channel1= (DMA_Channel_TypeDef *)DMA_Channel1_BASE;
-#endif /* _DMA_Channel1 */
-
-#ifdef _DMA_Channel2
- DMA_Channel2 = (DMA_Channel_TypeDef *)DMA_Channel2_BASE;
-#endif /* _DMA_Channel2 */
-
-#ifdef _DMA_Channel3
- DMA_Channel3 = (DMA_Channel_TypeDef *)DMA_Channel3_BASE;
-#endif /* _DMA_Channel3 */
-
-#ifdef _DMA_Channel4
- DMA_Channel4 = (DMA_Channel_TypeDef *)DMA_Channel4_BASE;
-#endif /* _DMA_Channel4 */
-
-#ifdef _DMA_Channel5
- DMA_Channel5= (DMA_Channel_TypeDef *)DMA_Channel5_BASE;
-#endif /* _DMA_Channel5*/
-
-
-#ifdef _DMA_Channel6
- DMA_Channel6 = (DMA_Channel_TypeDef *)DMA_Channel6_BASE;
-#endif /* _DMA_Channel6 */
-
-#ifdef _DMA_Channel7
- DMA_Channel7 = (DMA_Channel_TypeDef *)DMA_Channel7_BASE;
-#endif /* _DMA_Channel7 */
-
-
-
- /************************* EMI *************************/
-
-#ifdef _EMI_Bank0
- EMI_Bank0= (EMI_Bank_TypeDef *)EMI_Bank0_BASE;
-#endif /* _EMI_Bank0 */
-
-#ifdef _EMI_Bank1
- EMI_Bank1= (EMI_Bank_TypeDef *)EMI_Bank1_BASE;
-#endif /* _EMI_Bank1 */
-
-#ifdef _EMI_Bank2
- EMI_Bank2 = (EMI_Bank_TypeDef *)EMI_Bank2_BASE;
-#endif /* _EMI_Bank2 */
-
-#ifdef _EMI_Bank3
- EMI_Bank3 = (EMI_Bank_TypeDef *)EMI_Bank3_BASE;
- #endif /* _EMI_Bank3 */
-
-
-
-/************************* AHBAPB *************************/
-
-#ifdef _AHBAPB0
- AHBAPB0 = (AHBAPB_TypeDef *)AHBAPB0_BASE;
-#endif /* _AHBAPB0 */
-
-#ifdef _AHBAPB1
- AHBAPB1 = (AHBAPB_TypeDef *)AHBAPB1_BASE;
-#endif /*_AHBAPB1 */
-
-
-
-/************************* FMI *************************/
-
-#ifdef _FMI
- FMI = (FMI_TypeDef *)FMI_BASE;
-#endif /* _FMI */
-
-/************************* VIC *************************/
-
-#ifdef _VIC0
- VIC0 = (VIC_TypeDef *)VIC0_BASE;
-#endif /* _VIC0 */
-
-#ifdef _VIC1
- VIC1 = (VIC_TypeDef *)VIC1_BASE;
-#endif /* _VIC1 */
-
-/************************* WIU *************************/
-
-#ifdef _WIU
- WIU = (WIU_TypeDef *)WIU_BASE;
-#endif /* _WIU */
-
-/************************* TIM *************************/
-
-#ifdef _TIM0
- TIM0 = (TIM_TypeDef *)TIM0_BASE;
-#endif /* _TIM0 */
-
-#ifdef _TIM1
- TIM1 = (TIM_TypeDef *)TIM1_BASE;
-#endif /* _TIM1 */
-
-#ifdef _TIM2
- TIM2 = (TIM_TypeDef *)TIM2_BASE;
-#endif /* _TIM2 */
-
-#ifdef _TIM3
- TIM3 = (TIM_TypeDef *)TIM3_BASE;
-#endif /* _TIM3 */
-
-/************************* GPIO ************************/
-
-#ifdef _GPIO0
- GPIO0 = (GPIO_TypeDef *)GPIO0_BASE;
-#endif /* _GPIO0 */
-
-#ifdef _GPIO1
- GPIO1 = (GPIO_TypeDef *)GPIO1_BASE;
-#endif /* _GPIO1 */
-
-#ifdef _GPIO2
- GPIO2 = (GPIO_TypeDef *)GPIO2_BASE;
-#endif /* _GPIO2 */
-
-#ifdef _GPIO3
- GPIO3 = (GPIO_TypeDef *)GPIO3_BASE;
-#endif /* _GPIO3 */
-
-#ifdef _GPIO4
- GPIO4 = (GPIO_TypeDef *)GPIO4_BASE;
-#endif /* _GPIO4 */
-
-#ifdef _GPIO5
- GPIO5 = (GPIO_TypeDef *)GPIO5_BASE;
-#endif /* _GPIO5 */
-
-#ifdef _GPIO6
- GPIO6 = (GPIO_TypeDef *)GPIO6_BASE;
-#endif /* _GPIO6 */
-
-#ifdef _GPIO7
- GPIO7 = (GPIO_TypeDef *)GPIO7_BASE;
-#endif /* _GPIO7 */
-
-#ifdef _GPIO8
- GPIO8 = (GPIO_TypeDef *)GPIO8_BASE;
-#endif /* _GPIO8 */
-
-#ifdef _GPIO9
- GPIO9 = (GPIO_TypeDef *)GPIO9_BASE;
-#endif /* _GPIO9 */
-
-/************************* RTC *************************/
-
-#ifdef _RTC
- RTC = (RTC_TypeDef *)RTC_BASE;
-#endif /* _RTC */
-
-/************************* PRCCU ***********************/
-
-#ifdef _SCU
- SCU = (SCU_TypeDef *)SCU_BASE;
-#endif /* _PRCCU */
-
-/************************** MC *************************/
-
-#ifdef _MC
- MC = (MC_TypeDef *)MC_BASE;
-#endif /* _MC */
-
-/************************* UART ************************/
-
-#ifdef _UART0
- UART0 = (UART_TypeDef *)UART0_BASE;
-#endif /* _UART0 */
-
-#ifdef _UART1
- UART1 = (UART_TypeDef *)UART1_BASE;
-#endif /* _UART1 */
-
-#ifdef _UART2
- UART2 = (UART_TypeDef *)UART2_BASE;
-#endif /* _UART2 */
-
-/************************* SSP *************************/
-
-#ifdef _SSP0
- SSP0 = (SSP_TypeDef *)SSP0_BASE;
-#endif /* _SSP0 */
-
-#ifdef _SSP1
- SSP1 = (SSP_TypeDef *)SSP1_BASE;
-#endif /* _SSP1 */
-
-/************************* CAN *************************/
-
-#ifdef _CAN
- CAN = (CAN_TypeDef *)CAN_BASE;
-#endif /* _CAN */
-
-/************************* ADC *************************/
-
-#ifdef _ADC
- ADC = (ADC_TypeDef *)ADC_BASE;
-#endif /* _ADC */
-
-/************************* WDG *************************/
-
-#ifdef _WDG
- WDG = (WDG_TypeDef *)WDG_BASE;
-#endif /* _WDG */
-
-/************************* I2C *************************/
-
-#ifdef _I2C0
- I2C0 = (I2C_TypeDef *)I2C0_BASE;
-#endif /* _I2C0 */
-
-#ifdef _I2C1
- I2C1 = (I2C_TypeDef *)I2C1_BASE;
-#endif /* _I2C1 */
-/********************** ENET **************************/
-#ifdef _ENET
- ENET_MAC = (ENET_MAC_TypeDef *)ENET_MAC_BASE;
- ENET_DMA = (ENET_DMA_TypeDef *)ENET_DMA_BASE;
-#endif /* _ENET */
-}
-#endif /* LIBDEBUG */
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/src/91x_mc.c b/uc_str912/prj_template91x/str91x_lib/src/91x_mc.c deleted file mode 100644 index d3ca96a..0000000 --- a/uc_str912/prj_template91x/str91x_lib/src/91x_mc.c +++ /dev/null @@ -1,932 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_mc.c
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file provides all the MC software functions.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_mc.h"
-#include "91x_scu.h"
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-
-#define MC_ODCS_Set 0x0001
-#define MC_ODCS_Reset 0x00FE
-
-#define MC_CMS_Set 0x0004
-#define MC_CMS_Reset 0x00FB
-
-#define MC_CPC_Set 0x0008
-#define MC_CTC_Set 0x0010
-
-#define MC_PCE_Set 0x0020
-#define MC_PCE_Reset 0xFFDF
-
-#define MC_TCE_Set 0x0040
-#define MC_TCE_Reset 0x00BF
-
-#define MC_DTE_Set 0x0080
-#define MC_DTE_Reset 0x007F
-
-#define MC_TCB_Set 0x0004
-#define MC_TCB_Reset 0x00FB
-
-#define MC_STC_Set 0x0008
-
-#define MC_TES_Set 0x0010
-#define MC_TES_Reset 0x00EF
-
-#define MC_CCPT_Set 0x0020
-#define MC_CCPT_Reset 0x005F
-
-#define MC_DISEST_Set 0x0040
-#define MC_DISEST_Reset 0x003F
-
-#define MC_DTS_Set 0x0001
-#define MC_DTS_Reset 0x00FE
-
-#define MC_SDT_Set 0x0002
-
-#define MC_C0SE_Set 0x0004
-#define MC_C0SE_Reset 0x00FB
-
-#define MC_CUSE_Set 0x0008
-#define MC_CUSE_Reset 0x00F7
-
-#define MC_CVSE_Set 0x0010
-#define MC_CVSE_Reset 0x00EF
-
-#define MC_CWSE_Set 0x0020
-#define MC_CWSE_Reset 0x00D0
-
-#define MC_RSE_Set 0x0040
-#define MC_RSE_Reset 0x00BF
-
-#define MC_GPI_Set 0x0080
-#define MC_GPI_Reset 0x007F
-
-#define MC_PUH_Set 0x0020
-#define MC_PUH_Reset 0x005F
-#define MC_PUL_Set 0x0010
-#define MC_PUL_Reset 0x006F
-
-#define MC_PVH_Set 0x0008
-#define MC_PVH_Reset 0x0077
-#define MC_PVL_Set 0x0004
-#define MC_PVL_Reset 0x007B
-
-#define MC_PWH_Set 0x0002
-#define MC_PWH_Reset 0x007D
-#define MC_PWL_Set 0x0001
-#define MC_PWL_Reset 0x007E
-
-#define MC_ODS_Set 0x0040
-#define MC_ODS_Reset 0xFF3F
-
-#define MC_ESC_Clear 0x4321
-
-#define MC_PCR1_TIN_MASK 0xFFFC
-#define MC_OPR_Mask 0x0040
-#define MC_UDCS_Mask 0x0002
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/******************************************************************************
-* Function Name : MC_DeInit
-* Description : Deinitializes MC peripheral registers to their default reset
-* values.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void MC_DeInit(void)
-{
- /* MC peripheral is under Reset */
- SCU_APBPeriphReset(__MC, ENABLE);
-
- /* MC peripheral Reset off */
- SCU_APBPeriphReset(__MC, DISABLE);
-}
-
-/*******************************************************************************
-* Function Name : MC_Init
-* Description : Initializes the MC peripheral according to the specified
-* parameters in the MC_InitStruct .
-* Input : IMC_InitStruct: pointer to a MC_InitTypeDef structure that
-* contains the configuration information for the MC peripheral.
-* Output : None
-* Return : None
-*******************************************************************************/
-void MC_Init(MC_InitTypeDef* MC_InitStruct)
-{
- /* Select the operating Mode */
- if(MC_InitStruct->MC_OperatingMode == MC_SoftwareOperating_Mode)
- {
- /* Select the Data transfer Mode */
- MC->PCR2 |= MC_DTS_Set;
-
- /* Enable the registers Software Data Transfer */
- MC->PCR2 |= MC_C0SE_Set | MC_CUSE_Set | MC_CVSE_Set | MC_CWSE_Set
- |MC_RSE_Set;
-
- }
- else
- {
- /* Select the Data transfer Mode */
- MC->PCR2 &= MC_DTS_Reset;
-
- /* Disable the registers Software Data Transfer */
- MC->PCR2 &= MC_C0SE_Reset | MC_CUSE_Reset | MC_CVSE_Reset | MC_CWSE_Reset
- |MC_RSE_Reset;
- }
-
- /* Select the MC PWM counter Mode */
- if(MC_InitStruct->MC_PWMMode == MC_PWMZeroCentered_Mode)
- {
- MC->PCR0 |= MC_CMS_Set;
- }
- else
- {
- MC->PCR0 &= MC_CMS_Reset;
- }
-
- /* Set the MC PWM counter Prescaler */
- MC->CPRS = MC_InitStruct->MC_Prescaler;
-
- /* Set the MC PWM Period */
- MC->CMP0 = MC_InitStruct->MC_Period;
-
- /* Set the MC PWM Repetition counter */
- MC->REP = MC_InitStruct->MC_RepetitionCounter;
-
- /* Set the Tacho Compare value */
- MC->TCMP = MC_InitStruct->MC_TachoPeriod;
-
- /* Set the Tacho Prescaler value */
- MC->TPRS = MC_InitStruct->MC_TachoPrescaler;
-
- /* Set the MC Tacho Input Polarity */
- MC->PCR1 = (MC->PCR1 & MC_PCR1_TIN_MASK) | MC_InitStruct->MC_TachoPolarity;
-
- /* Set the MC PWM Forced State */
- MC->OPR |= MC_ODS_Set;
- MC->OPR = (MC->OPR & MC_OPR_Mask) | MC_InitStruct->MC_ForcedPWMState;
-
- /* Select the Tacho Mode */
- if(MC_InitStruct->MC_TachoMode == MC_TachoOneShot_Mode)
- {
- MC->PCR1 |= MC_TCB_Set;
- }
- else
- {
- MC->PCR1 &= MC_TCB_Reset;
- }
-
- /* Select the Tacho Event Mode */
- if(MC_InitStruct->MC_TachoEvent_Mode == MC_TachoEvent_Software_Mode)
- {
- MC->PCR1 |= MC_TES_Set;
- }
- else
- {
- MC->PCR1 &= MC_TES_Reset;
- }
-
- /* Enable or disable the emergency input */
- if(MC_InitStruct->MC_Emergency == MC_Emergency_Enable)
- {
- MC->PCR1 &= MC_DISEST_Reset;
- }
- else
- {
- MC->PCR1 |= MC_DISEST_Set;
- }
-
-/* Select the complementary Mode */
- if(MC_InitStruct->MC_Complementary == MC_Complementary_Enable)
- {
- MC->DTG = MC_InitStruct->MC_DeadTime;
- MC->PCR0 |= MC_ODCS_Set;
- }
- else
- {
- MC->PCR0 &= MC_ODCS_Reset;
- }
-
- /* Tacho Mode selection */
- if(MC_InitStruct->MC_TachoMode == MC_TachoOneShot_Mode)
- {
- MC->PCR1 |= MC_TCB_Set;
- }
- else
- {
- MC->PCR1 &= MC_TCB_Reset;
- }
-
- switch(MC_InitStruct->MC_Channel)
- {
- /* Channel U configuration */
- case MC_Channel_U:
- {
- MC->CMPU = MC_InitStruct->MC_PulseU;
-
- if(MC_InitStruct->MC_PolarityUL == MC_Polarity_Inverted)
- {
- MC->PSR |= MC_PUL_Set;
- }
- else
- {
- MC->PSR &= MC_PUL_Reset;
- }
- if(MC_InitStruct->MC_PolarityUH == MC_Polarity_Inverted)
- {
- MC->PSR |= MC_PUH_Set;
- }
- else
- {
- MC->PSR &= MC_PUH_Reset;
- }
- break;
- }
-
- /* Channel V configuration */
- case MC_Channel_V:
- {
- MC->CMPV = MC_InitStruct->MC_PulseV;
-
- if(MC_InitStruct->MC_PolarityVL == MC_Polarity_Inverted)
- {
- MC->PSR |= MC_PVL_Set;
- }
- else
- {
- MC->PSR &= MC_PVL_Reset;
- }
- if(MC_InitStruct->MC_PolarityVH == MC_Polarity_Inverted)
- {
- MC->PSR |= MC_PVH_Set;
- }
- else
- {
- MC->PSR &= MC_PVH_Reset;
- }
- break;
- }
-
- /* Channel W configuration */
- case MC_Channel_W:
- {
- MC->CMPW = MC_InitStruct->MC_PulseW;
-
- if(MC_InitStruct->MC_PolarityWL == MC_Polarity_Inverted)
- {
- MC->PSR |= MC_PWL_Set;
- }
- else
- {
- MC->PSR &= MC_PWL_Reset;
- }
- if(MC_InitStruct->MC_PolarityWH == MC_Polarity_Inverted)
- {
- MC->PSR |= MC_PWH_Set;
- }
- else
- {
- MC->PSR &= MC_PWH_Reset;
- }
- break;
- }
- /* All Channel Configuration */
- case MC_Channel_ALL:
- {
- MC->CMPU = MC_InitStruct->MC_PulseU;
- MC->CMPV = MC_InitStruct->MC_PulseV;
- MC->CMPW = MC_InitStruct->MC_PulseW;
-
- if(MC_InitStruct->MC_PolarityUL == MC_Polarity_Inverted)
- {
- MC->PSR |= MC_PUL_Set;
- }
- else
- {
- MC->PSR &= MC_PUL_Reset;
- }
- if(MC_InitStruct->MC_PolarityUH == MC_Polarity_Inverted)
- {
- MC->PSR |= MC_PUH_Set;
- }
- else
- {
- MC->PSR &= MC_PUH_Reset;
- }
-
- if(MC_InitStruct->MC_PolarityVL == MC_Polarity_Inverted)
- {
- MC->PSR |= MC_PVL_Set;
- }
- else
- {
- MC->PSR &= MC_PVL_Reset;
- }
- if(MC_InitStruct->MC_PolarityVH == MC_Polarity_Inverted)
- {
- MC->PSR |= MC_PVH_Set;
- }
- else
- {
- MC->PSR &= MC_PVH_Reset;
- }
-
- if(MC_InitStruct->MC_PolarityWL == MC_Polarity_Inverted)
- {
- MC->PSR |= MC_PWL_Set;
- }
- else
- {
- MC->PSR &= MC_PWL_Reset;
- }
- if(MC_InitStruct->MC_PolarityWH == MC_Polarity_Inverted)
- {
- MC->PSR |= MC_PWH_Set;
- }
- else
- {
- MC->PSR &= MC_PWH_Reset;
- }
- }
- default:
- break;
- }
-}
-
-/*******************************************************************************
-* Function Name : MC_StructInit
-* Description : Fills each MC_InitStruct member with its default value.
-* Input : MC_InitStruct : pointer to a MC_InitTypeDef structure which
-* will be initialized.
-* Output : None
-* Return : None.
-*******************************************************************************/
-void MC_StructInit(MC_InitTypeDef* MC_InitStruct)
-{
- MC_InitStruct->MC_OperatingMode = MC_HardwareOperating_Mode;
- MC_InitStruct->MC_TachoMode = MC_TachoContinuous_Mode;
- MC_InitStruct->MC_TachoEvent_Mode = MC_TachoEvent_Hardware_Mode;
- MC_InitStruct->MC_Prescaler = 0x00;
- MC_InitStruct->MC_TachoPrescaler = 0x0000;
- MC_InitStruct->MC_PWMMode = MC_PWMClassical_Mode;
- MC_InitStruct->MC_Complementary = MC_Complementary_Enable;
- MC_InitStruct->MC_Emergency = MC_Emergency_Disable;
- MC_InitStruct->MC_ForcedPWMState = 0x003F;
- MC_InitStruct->MC_Period = 0x0000;
- MC_InitStruct->MC_TachoPeriod = 0x00FF;
- MC_InitStruct->MC_Channel = MC_Channel_ALL;
- MC_InitStruct->MC_PulseU = 0x0000;
- MC_InitStruct->MC_PulseV = 0x0000;
- MC_InitStruct->MC_PulseW = 0x0000;
- MC_InitStruct->MC_PolarityUL = MC_Polarity_NonInverted;
- MC_InitStruct->MC_PolarityUH = MC_Polarity_NonInverted;
- MC_InitStruct->MC_PolarityVL = MC_Polarity_NonInverted;
- MC_InitStruct->MC_PolarityVH = MC_Polarity_NonInverted;
- MC_InitStruct->MC_PolarityWL = MC_Polarity_NonInverted;
- MC_InitStruct->MC_PolarityWH = MC_Polarity_NonInverted;
- MC_InitStruct->MC_TachoPolarity = MC_TachoEventEdge_RisingFalling;
- MC_InitStruct->MC_DeadTime = 0x003F;
- MC_InitStruct->MC_RepetitionCounter = 0x0000;
-}
-
-/*******************************************************************************
-* Function Name : MC_Cmd
-* Description : Enables or disables the MC peripheral.
-* Input : Newstate: new state of the MC peripheral.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None
-* Return : None
-*******************************************************************************/
-void MC_Cmd(FunctionalState NewState)
-{
- if(NewState == ENABLE)
- {
- /* Enable the PWM counter */
- MC->PCR0 |= MC_PCE_Set;
-
- /* Enable the Tacho counter */
- MC->PCR0 |= MC_TCE_Set;
-
- /* Enable the Dead Time counter */
- MC->PCR0 |= MC_DTE_Set;
- }
- else
- {
- /* Disable the PWM counter */
- MC->PCR0 &= MC_PCE_Reset;
-
- /* Disable the Tacho counter */
- MC->PCR0 &= MC_TCE_Reset;
-
- /* Disable the Dead counter */
- MC->PCR0 &= MC_DTE_Reset;
- }
-}
-
-/*******************************************************************************
-* Function Name : MC_ClearPWMCounter
-* Description : Clears the MC PWM counter.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void MC_ClearPWMCounter(void)
-{
-/* Clear the PWM counter */
- MC->PCR0 |= MC_CPC_Set;
-}
-
-/*******************************************************************************
-* Function Name : MC_ClearTachoCounter
-* Description : Clears the MC Tacho counter.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void MC_ClearTachoCounter(void)
-{
-/* Clear the Tacho counter */
- MC->PCR0 |= MC_CTC_Set;
-}
-
-/*******************************************************************************
-* Function Name : MC_CtrlPWMOutputs
-* Description : Enables or disables MC peripheral Main Outputs.
-* Input : Newstate: new state of the MC peripheral Main Outputs.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None
-* Return : None
-*******************************************************************************/
-void MC_CtrlPWMOutputs(FunctionalState Newstate)
-{
- if(Newstate == ENABLE)
- {
- /* Enable the dead time generator data */
- MC->OPR &= MC_ODS_Reset;
- }
- else
- {
- /* Enable the default state data */
- MC->OPR |= MC_ODS_Set;
- }
-}
-
-/*******************************************************************************
-* Function Name : MC_ITConfig
-* Description : Enables or disables the MC interrupts.
-* Input : - MC_IT: specifies the MC interrupts sources to be enabled
-* or disabled.
-* This parameter can be any combination of the following values:
-* - MC_IT_CMPW: Compare W Interrupt.
-* - MC_IT_CMPV: Compare V Interrupt.
-* - MC_IT_CMPU: Compare U Interrupt.
-* - MC_IT_ZPC: Zero of PWM counter Interrupt.
-* - MC_IT_ADT: Automatic Data Transfer Interrupt.
-* - MC_IT_OTC: Overflow of Tacho counter Interrupt.
-* - MC_IT_CPT: Capture of Tacho counter Interrupt.
-* - MC_IT_CM0: Compare 0 Interrupt.
-* - Newstate: new state of IMC interrupts.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None
-* Return : None
-*******************************************************************************/
-void MC_ITConfig(u16 MC_IT, FunctionalState NewState)
-{
- if(NewState == ENABLE)
- {
- /* Enable the specific interrupt source */
- MC->IMR |= MC_IT;
-
- /* Enable the global peripheral interrupt sources */
- MC->PCR2 |= MC_GPI_Set;
- }
- else
- {
- /* Disable the specific interrupt source */
- MC->IMR &= ~MC_IT;
-
- /* Disable the global peripheral interrupt sources */
- MC->PCR2 &= MC_GPI_Reset;
- }
-}
-
-/*******************************************************************************
-* Function Name : MC_SetPrescaler
-* Description : Sets the MC prescaler value.
-* Input : MC_Prescaler: MC prescaler new value.
-* Output : None
-* Return : None
-*******************************************************************************/
-void MC_SetPrescaler(u8 MC_Prescaler)
-{
-/* Set the Prescaler Register value */
- MC->CPRS = MC_Prescaler;
-}
-
-/*******************************************************************************
-* Function Name : MC_SetPeriod
-* Description : Sets the MC period value.
-* Input : MC_Period: MC period new value.
-* Output : None
-* Return : None
-*******************************************************************************/
-void MC_SetPeriod(u16 MC_Period)
-{
-/* Set the Period Register value */
- MC->CMP0 = MC_Period;
-}
-
-/*******************************************************************************
-* Function Name : MC_SetPulseU
-* Description : Sets the MC pulse U value.
-* Input : MC_PulseU: MC pulse U new value.
-* Output : None
-* Return : None
-*******************************************************************************/
-void MC_SetPulseU(u16 MC_PulseU)
-{
-/* Set the Pulse U Register value */
- MC->CMPU = MC_PulseU;
-}
-
-/*******************************************************************************
-* Function Name : MC_SetPulseV
-* Description : Sets the MC pulse V value.
-* Input : MC_PulseV: MC pulse V new value.
-* Output : None
-* Return : None
-*******************************************************************************/
-void MC_SetPulseV(u16 MC_PulseV)
-{
-/* Set the Pulse V Register value */
- MC->CMPV = MC_PulseV;
-}
-
-/*******************************************************************************
-* Function Name : MC_SetPulseW
-* Description : Sets the MC pulse W value.
-* Input : MC_PulseW: MC pulse W new value.
-* Output : None
-* Return : None
-*******************************************************************************/
-void MC_SetPulseW(u16 MC_PulseW)
-{
-/* Set the Pulse W Register value */
- MC->CMPW = MC_PulseW;
-}
-
-/*******************************************************************************
-* Function Name : MC_PWMModeConfig
-* Description : Selects the MC PWM counter Mode.
-* Input : MC_PWMMode: MC PWM counter Mode.
-* Output : None
-* Return : None
-*******************************************************************************/
-void MC_PWMModeConfig(u16 MC_PWMMode)
-{
- /* Select the MC PWM counter Mode */
- if(MC_PWMMode == MC_PWMZeroCentered_Mode)
- {
- MC->PCR0 |= MC_CMS_Set;
- }
- else
- {
- MC->PCR0 &= MC_CMS_Reset;
- }
-}
-
-/*******************************************************************************
-* Function Name : MC_SetDeadTime
-* Description : Sets the MC dead time value.
-* Input : MC_DeadTime: MC dead time new value.
-* Output : None
-* Return : None
-*******************************************************************************/
-void MC_SetDeadTime(u16 MC_DeadTime)
-{
-/* Set the dead time Register value */
- MC->DTG = MC_DeadTime;
-}
-
-/*******************************************************************************
-* Function Name : MC_SetTachoCompare
-* Description : Sets the MC Tacho Compare Register value.
-* Input : MC_Compare: MC Tacho compare new value.
-* Output : None
-* Return : None
-*******************************************************************************/
-void MC_SetTachoCompare(u8 MC_Compare)
-{
- /* Sets the Tacho Compare Register value */
- MC->TCMP = MC_Compare;
-}
-/*******************************************************************************
-* Function Name : MC_EmergencyCmd
-* Description : Enables or disables the MC emergency feauture.
-* Input : Newstate: new state of the MC peripheral Emergency.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None
-* Return : None
-*******************************************************************************/
-void MC_EmergencyCmd(FunctionalState NewState)
-{
- if(NewState == ENABLE)
- {
- /* Reset the DISEST Bit in the PCR1 Register to enable the emergency stop input */
- MC->PCR1 &= MC_DISEST_Reset;
- }
- else
- {
- /* Set the DISEST Bit in the PCR1 Register to disable the emergency stop input */
- MC->PCR1 |= MC_DISEST_Reset;
- }
-}
-
-/*******************************************************************************
-* Function Name : MC_EmergencyClear
-* Description : Clears the MC Emergency Register.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void MC_EmergencyClear(void)
-{
-/* Force PWM outputs in safe state (All OFF) */
- MC->OPR |= MC_ODS_Set;
-
-/* Clear EST bit */
- MC->ESC = MC_ESC_Clear;
-
-/* Re-enable protection */
- MC->ESC = 0;
-
-/* Enables the Outputs */
- MC->OPR &= MC_ODS_Reset;
-}
-
-/*******************************************************************************
-* Function Name : MC_GetPeriod
-* Description : Gets the MC period value.
-* Input : None
-* Output : None
-* Return : MC period value.
-*******************************************************************************/
-u16 MC_GetPeriod(void)
-{
-/* Return the PWM signal period value */
- return MC->CMP0;
-}
-
-/*******************************************************************************
-* Function Name : MC_GetPulseU
-* Description : Gets the MC pulse U value.
-* Input : None
-* Output : None
-* Return : MC pulse U value.
-*******************************************************************************/
-u16 MC_GetPulseU(void)
-{
-/* Return the PWM pulse U Register value */
- return MC->CMPU;
-}
-
-/*******************************************************************************
-* Function Name : MC_GetPulseV
-* Description : Gets the MC pulse V value.
-* Input : None
-* Output : None
-* Return : MC pulse V value.
-*******************************************************************************/
-u16 MC_GetPulseV(void)
-{
-/* Return the PWM pulse V Register value */
- return MC->CMPV;
-}
-
-/*******************************************************************************
-* Function Name : MC_GetPulseW
-* Description : Gets the MC pulse W value.
-* Input : None
-* Output : None
-* Return : MC pulse W value.
-*******************************************************************************/
-u16 MC_GetPulseW(void)
-{
-/* Return the PWM pulse W Register value */
- return MC->CMPW;
-}
-
-/*******************************************************************************
-* Function Name : MC_GetTachoCapture
-* Description : Gets the MC Tacho period value.
-* Input : None
-* Output : None
-* Return : MC Tacho capture value.
-*******************************************************************************/
-u16 MC_GetTachoCapture(void)
-{
-/* Return the Tacho Capture Register value */
- return MC->TCPT;
-}
-
-/*******************************************************************************
-* Function Name : MC_ClearOnTachoCapture
-* Description : Enables or disables the the Clear on capture of tacho counter.
-* Input : Newstate: new state of the CCPT bit.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None
-* Return : None
-*******************************************************************************/
-void MC_ClearOnTachoCapture(FunctionalState NewState)
-{
- if(NewState == ENABLE)
- {
- /* Enable the Clear on capture of tacho counter */
- MC->PCR1 |= MC_CCPT_Set;
- }
- else
- {
- /* Disable the Clear on capture of tacho counter */
- MC->PCR1 &= MC_CCPT_Reset;
- }
-}
-/*******************************************************************************
-* Function Name : MC_ForceDataTransfer
-* Description : Sets the MC Outputs default states.
-* Input : MC_ForcedData: MC outputs new states.
-* Output : None
-* Return : None
-*******************************************************************************/
-void MC_ForceDataTransfer(u8 MC_ForcedData)
-{
- /* Set the MC PWM Forced State */
- MC->OPR |= MC_ODS_Set;
- MC->OPR = (MC->OPR & MC_OPR_Mask) | MC_ForcedData;
-}
-
-/*******************************************************************************
-* Function Name : MC_PreloadConfig
-* Description : Enables the Software Data Transfer.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void MC_SoftwarePreloadConfig(void)
-{
- /* Set the SDT: Software Data Transfer bit */
- MC->PCR2 |= MC_SDT_Set;
-}
-
-/*******************************************************************************
-* Function Name : MC_SoftwareTachoCapture
-* Description : Enables the Software Tacho Capture.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void MC_SoftwareTachoCapture(void)
-{
- /* Set the STC: Software Tacho Capture bit */
- MC->PCR1 |= MC_STC_Set;
-}
-
-/*******************************************************************************
-* Function Name : MC_GetCountingStatus
-* Description : Checks whether the PWM Counter is counting Up or Down.
-* Input : None
-* Output : None
-* Return : The new state of the PWM Counter(DOWN or UP).
-*******************************************************************************/
-CountingStatus MC_GetCountingStatus(void)
-{
- if((MC->PCR0 & MC_UDCS_Mask) != DOWN)
- {
- return UP;
- }
- else
- {
- return DOWN;
- }
-}
-
-/*******************************************************************************
-* Function Name : MC_GetFlagStatus
-* Description : Checks whether the specified MC flag is set or not.
-* Input : MC_FLAG: specifies the flag to check.
-* This parameter can be one of the following values:
-* - MC_FLAG_CMPW: Compare W Flag.
-* - MC_FLAG_CMPV: Compare V Flag.
-* - MC_FLAG_CMPU: Compare U Flag.
-* - MC_FLAG_ZPC: Zero of PWM counter Flag.
-* - MC_FLAG_ADT: Automatic Data Transfer Flag.
-* - MC_FLAG_OTC: Overflow of Tacho counter Flag.
-* - MC_FLAG_CPT: Capture of Tacho counter Flag.
-* - MC_FLAG_CM0: Compare 0 Flag.
-* - MC_FLAG_EST: Emergency Stop Flag.
-* Output : None
-* Return : The new state of the MC_FLAG(SET or RESET).
-*******************************************************************************/
-FlagStatus MC_GetFlagStatus(u16 MC_FLAG)
-{
- if((MC->IPR & MC_FLAG) != RESET)
- {
- return SET;
- }
- else
- {
- return RESET;
- }
-}
-
-/*******************************************************************************
-* Function Name : MC_ClearFlag
-* Description : Clears the MC’s pending flags.
-* Input : MC_FLAG: specifies the flag to clear.
-* This parameter can be any combination of the following values:
-* - MC_FLAG_CMPW: Compare W Flag.
-* - MC_FLAG_CMPV: Compare V Flag.
-* - MC_FLAG_CMPU: Compare U Flag.
-* - MC_FLAG_ZPC: Zero of PWM counter Flag.
-* - MC_FLAG_ADT: Automatic Data Transfer Flag.
-* - MC_FLAG_OTC: Overflow of Tacho counter Flag.
-* - MC_FLAG_CPT: Capture of Tacho counter Flag.
-* - MC_FLAG_CM0: Compare 0 Flag.
-* Output : None
-* Return : None
-*******************************************************************************/
-void MC_ClearFlag(u16 MC_FLAG)
-{
-/* Clear the corresponding Flag */
- MC->IPR &= ~MC_FLAG;
-}
-
-/*******************************************************************************
-* Function Name : MC_GetITStatus
-* Description : Checks whether the MC interrupt has occurred or not.
-* Input : MC_IT: specifies the MC interrupt source to check.
-* This parameter can be one of the following values:
-* - MC_IT_CMPW: Compare W Interrupt.
-* - MC_IT_CMPV: Compare V Interrupt.
-* - MC_IT_CMPU: Compare U Interrupt.
-* - MC_IT_ZPC: Zero of PWM counter Interrupt.
-* - MC_IT_ADT: Automatic Data Transfer Interrupt.
-* - MC_IT_OTC: Overflow of Tacho counter Interrupt.
-* - MC_IT_CPT: Capture of Tacho counter Interrupt.
-* - MC_IT_CM0: Compare 0 Interrupt.
-* Output : None
-* Return : The new state of the MC_IT(SET or RESET).
-*******************************************************************************/
-ITStatus MC_GetITStatus(u16 MC_IT)
-{
- if((MC->IPR & MC_IT) && (MC->IMR & MC_IT))
- {
- return SET;
- }
- else
- {
- return RESET;
- }
-}
-
-/*******************************************************************************
-* Function Name : MC_ClearITPendingBit
-* Description : Clears the IMC's interrupt pending bits.
-* Input : MC_IT: specifies the pending bit to clear.
-* This parameter can be any combination of the following values:
-* - MC_IT_CMPW: Compare W Interrupt.
-* - MC_IT_CMPV: Compare V Interrupt.
-* - MC_IT_CMPU: Compare U Interrupt.
-* - MC_IT_ZPC: Zero of PWM counter Interrupt.
-* - MC_IT_ADT: Automatic Data Transfer Interrupt.
-* - MC_IT_OTC: Overflow of Tacho counter Interrupt.
-* - MC_IT_CPT: Capture of Tacho counter Interrupt.
-* - MC_IT_CM0: Compare 0 Interrupt.
-* Output : None
-* Return : None
-*******************************************************************************/
-void MC_ClearITPendingBit(u16 MC_IT)
-{
-/* Clear the corresponding interrupt pending bit */
- MC->IPR &= ~MC_IT;
-}
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/src/91x_rtc.c b/uc_str912/prj_template91x/str91x_lib/src/91x_rtc.c deleted file mode 100644 index 2d0751b..0000000 --- a/uc_str912/prj_template91x/str91x_lib/src/91x_rtc.c +++ /dev/null @@ -1,400 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_rtc.c
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file provides the RTC library software functions
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
-* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_rtc.h"
-#include "91x_scu.h"
-
-/* Include of other module interface headers ---------------------------------*/
-/* Local includes ------------------------------------------------------------*/
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-u8 BYTEToBCD2(u8 value);
-u16 WORDToBCD3(u16 value);
-u8 BCD2ToBYTE(u8 value);
-u16 BCD3ToBYTE(u16 value);
-/* Interface functions -------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/*******************************************************************************
-* Function Name : BYTEToBCD2
-* Description : Converts a 2 digit decimal to BCD format
-* Input : None
-* Output : None
-* Return : Converted byte
-*******************************************************************************/
-u8 BYTEToBCD2(u8 value)
-{
- u8 bcdhigh = 0;
- while (value >= 10)
- {
- bcdhigh++;
- value -= 10;
- }
- return (bcdhigh << 4) | value;
-}
-/*******************************************************************************
-* Function Name : WORDToBCD3
-* Description : Converts a 3 digit decimal to BCD format
-* Input : None
-* Output : None
-* Return : Converted word
-*******************************************************************************/
-u16 WORDToBCD3(u16 value)
-{
- u16 bcdhigh = 0;
- while (value >= 100)
- {
- bcdhigh++;
- value -= 100;
- }
- bcdhigh <<= 4;
- while (value >= 10)
- {
- bcdhigh++;
- value -= 10;
- }
- return (bcdhigh << 4) | value;
-}
-
-/*******************************************************************************
-* Function Name : BCD3ToWORD
-* Description : convert from 3 digit BCD to Binary
-* Input : None
-* Output : None
-* Return : Converted word
-*******************************************************************************/
-u16 BCD3ToWORD(u16 value)
-{
- return (u16)((((value&0xF00)>>8)*100) + (((value&0x0F0)>>4)*10) + (value&0x0F));
-}
-
-/*******************************************************************************
-* Function Name : BCD2ToBYTE
-* Description : convert from 2 digit BCD to Binary
-* Input : None
-* Output : None
-* Return : Converted word
-*******************************************************************************/
-u8 BCD2ToBYTE(u8 value)
-{
- u32 tmp;
- tmp= ((value&0xF0)>>4)*10;
- return (u8)(tmp+ (value&0x0F));
-}
-
-/*******************************************************************************
-* Function Name : RTC_DeInit
-* Description : Resets the RTC peripheral registers
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void RTC_DeInit(void)
-{
- SCU_APBPeriphReset(__RTC,ENABLE);
- SCU_APBPeriphReset(__RTC,DISABLE);
-}
-
-/*******************************************************************************
-* Function Name : RTC_SetDate
-* Description : Sets the Date register
-* Input : struct of type RTC_DATE
-* Output : None
-* Return : None
-*******************************************************************************/
-void RTC_SetDate(RTC_DATE Date)
-{
- u32 tmp = 0;
-
- RTC->CR |=0x80; /*Enable write operation in DTR register*/
- RTC->DTR = 0;
- tmp = BYTEToBCD2(Date.century);
- RTC->DTR|=tmp<<24;
- tmp = BYTEToBCD2(Date.year);
- RTC->DTR|=tmp<<16;
- tmp = BYTEToBCD2(Date.month);
- RTC->DTR|=tmp<<8;
- tmp = BYTEToBCD2(Date.weekday);
- RTC->DTR|=tmp;
- RTC->TR &=0xFFFFFF;
- tmp = BYTEToBCD2(Date.day);
- RTC->TR|=tmp<<24;
- RTC->CR &=~0x80; /*Disable write operation in DTR register*/
-}
-/*******************************************************************************
-* Function Name : RTC_SetTime
-* Description : Sets the Time register
-* Input : struct of type RTC_TIME
-* Output : None
-* Return : None
-*******************************************************************************/
-void RTC_SetTime(RTC_TIME Time)
-{
- u32 tmp = 0;
-
- RTC->CR |=0x80; /*Enable write operation in TR register*/
- RTC->TR &= 0xFF000000;
- tmp = BYTEToBCD2(Time.hours);
- RTC->TR|=tmp<<16;
- tmp = BYTEToBCD2(Time.minutes);
- RTC->TR|=tmp<<8;
- tmp = BYTEToBCD2(Time.seconds);
- RTC->TR|=tmp;
- RTC->MILR = 0;
- RTC->MILR |= WORDToBCD3(Time.milliseconds);
- RTC->CR &=~0x80; /*Disable write operation in TR register*/
-}
-/*******************************************************************************
-* Function Name : RTC_SetAlarm
-* Description : Sets the Alarm register
-* Input : Struct of type RTC_ALARM
-* Output : Date
-* Return : None
-*******************************************************************************/
-void RTC_SetAlarm(RTC_ALARM Alarm)
-{
- u32 tmp = 0;
-
- RTC->CR |=0x80; /*Enable write operation in ATR register*/
- RTC->ATR = 0;
- tmp = BYTEToBCD2(Alarm.day);
- RTC->ATR|=tmp<<24;
- tmp = BYTEToBCD2(Alarm.hours);
- RTC->ATR|=tmp<<16;
- tmp = BYTEToBCD2(Alarm.minutes);
- RTC->ATR|=tmp<<8;
- tmp = BYTEToBCD2(Alarm.seconds);
- RTC->ATR|=tmp;
- RTC->CR &=~0x80; /*Disable write operation in ATR register*/
-}
-
-/*******************************************************************************
-* Function Name : RTC_GetDate
-* Description : Gets RTC date in BCD coded or BINARY code
-* Input : -Format: BCD or BINARY
-* -Date: pointer to structure of type RTC_DATE to be filled by function
-* Output : None
-* Return : None
-*******************************************************************************/
-void RTC_GetDate(u8 Format, RTC_DATE * Date)
-{
- Date->century = (u8)((RTC->DTR&0xFF000000)>>24);
- Date->year = (u8)((RTC->DTR&0x00FF0000)>>16);
- Date->month = (u8)((RTC->DTR&0x00001F00)>>8);
- Date->day = (u8)((RTC->TR&0x3F000000)>>24);
- Date->weekday = (u8)(RTC->DTR&0xF);
- if (Format == BINARY)
- {
- Date->century = BCD2ToBYTE(Date->century);
- Date->year = BCD2ToBYTE(Date->year);
- Date->month = BCD2ToBYTE(Date->month);
- Date->day = BCD2ToBYTE(Date->day);
- Date->weekday = BCD2ToBYTE(Date->weekday);
- }
-}
-
-/*******************************************************************************
-* Function Name : RTC_GetTime
-* Description : Gets TIME in BCD coded or BINARY code
-* Input : -Format: BCD or BINARY
-* -Time : pointer to structure of type RTC_TIME to be filled by function
-* Output : Time
-* Return : None
-*******************************************************************************/
-void RTC_GetTime(u8 Format, RTC_TIME * Time)
-{
-
- Time->hours = (u8)((RTC->TR&0x003F0000)>>16);
- Time->minutes = (u8)((RTC->TR&0x00007F00)>>8);
- Time->seconds = (u8)(RTC->TR&0x7F);
- Time->milliseconds =(u16)(RTC->MILR&0xFFF);
- if (Format == BINARY)
- {
- Time->hours = BCD2ToBYTE(Time->hours);
- Time->minutes = BCD2ToBYTE(Time->minutes);
- Time->seconds = BCD2ToBYTE(Time->seconds);
- Time->milliseconds = BCD3ToWORD(Time->milliseconds);
- }
-}
-
-
-/*******************************************************************************
-* Function Name : RTC_GetAlarm
-* Description : Gets the RTC Alarm in BCD or BINARY code
-* Input : -Format: BCD or BINARY
-* -Alarm : pointer to structure of type RTC_ALARM to be filled by function
-* Output : Alarm
-* Return : None
-*******************************************************************************/
-void RTC_GetAlarm(u8 Format,RTC_ALARM * Alarm)
-{
- Alarm->day = (u8)((RTC->ATR&0x3F000000)>>24);
- Alarm->hours = (u8)((RTC->ATR&0x003F0000)>>16);
- Alarm->minutes = (u8)((RTC->ATR&0x00007F00)>>8);
- Alarm->seconds = (u8)((RTC->ATR)&0x7F);
- if (Format == BINARY)
- {
- Alarm->day = BCD2ToBYTE(Alarm->day);
- Alarm->hours = BCD2ToBYTE(Alarm->hours);
- Alarm->minutes = BCD2ToBYTE(Alarm->minutes);
- Alarm->seconds = BCD2ToBYTE(Alarm->seconds);
- }
-}
-
-/*******************************************************************************
-* Function Name : RTC_TamperConfig
-* Description : configures the Tamper mode and tamper polarity
-* Input : -TamperMode: RTC_TamperMode_Edge or RTC_TamperMode_Level
-* -TamperPol : RTC_TamperPol_Low or RTC_TamperMode_High
-* Output : None
-* Return : None
-*******************************************************************************/
-void RTC_TamperConfig(u32 TamperMode, u32 TamperPol)
-{
- RTC->CR&=RTC_TamperMode_Edge;
- if (TamperMode!=RTC_TamperMode_Edge)
- RTC->CR|=RTC_TamperMode_Level;
-
- RTC->CR&=RTC_TamperPol_Low;
- if (TamperPol!=RTC_TamperPol_Low)
- RTC->CR|=RTC_TamperPol_High;
-}
-
-/*******************************************************************************
-* Function Name : RTC_TamperCmd
-* Description : Enable or Disable Tamper
-* Input : NewState: ENABLE or DISABLE
-* Output : None
-* Return : None
-*******************************************************************************/
-void RTC_TamperCmd(FunctionalState NewState)
-{
- RTC->CR&=0xFFFFFFFE;
- if (NewState==ENABLE)
- RTC->CR|=0x1;
-}
-
-/*******************************************************************************
-* Function Name : RTC_AlarmCmd
-* Description : Enable or Disable Alarm
-* Input : NewState: ENABLE or DISABLE
-* Output : None
-* Return : None
-*******************************************************************************/
-void RTC_AlarmCmd(FunctionalState NewState)
-{
- RTC->CR&=~0x100000;
- if (NewState==ENABLE)
- RTC->CR|=0x100000;
-}
-
-/*******************************************************************************
-* Function Name : RTC_CalibClockCmd
-* Description : Enable or Disable RTC Calibration Clock Output
-* Input : NewState: ENABLE or DISABLE
-* Output : None
-* Return : None
-*******************************************************************************/
-void RTC_CalibClockCmd(FunctionalState NewState)
-{
- RTC->CR&=~0x40;
- if (NewState ==ENABLE)
- RTC->CR|=0x40;
-}
-
-/*******************************************************************************
-* Function Name : SRAMBattPowerCmd
-* Description : Enable or Disable SRAM backup Power by VBATT
-* Input : NewState : ENABLE or DISABLE
-* Output : None
-* Return : None
-*******************************************************************************/
-void RTC_SRAMBattPowerCmd(FunctionalState NewState)
-{
- RTC->CR&=~0x8;
- if (NewState ==ENABLE)
- RTC->CR|=0x8;
-}
-
-/*******************************************************************************
-* Function Name : RTC_PeridicIntConfig
-* Description : Select a Periodic CLock
-* Input : PeriodicClock
-* Output : None
-* Return : None
-* Note : When PeriodicClock = RTC_Per_DISABLE the Periodic clock generation
-* will be disabled.
-*******************************************************************************/
-void RTC_PeriodicIntConfig(u32 PeriodicClock)
-{
- RTC->CR &=~0xF0000;
- RTC->CR|=PeriodicClock;
-}
-
-/*******************************************************************************
-* Function Name : RTC_ITConfig
-* Description : Enable or Disable an interrupt
-* Input : -RTC_IT : RTC interrupt
-* -Newstate: Enable or Disable
-* Output : None
-* Return : None
-*******************************************************************************/
-void RTC_ITConfig(u32 RTC_IT, FunctionalState NewState)
-{
- RTC->CR&=~RTC_IT;
- if (NewState==ENABLE)
- RTC->CR|=RTC_IT;
-}
-
-/*******************************************************************************
-* Function Name : RTC_GetFlagStatus
-* Description : Gets a RTC flag status
-* Input : RTC_FLAG
-* Output : None
-* Return : FlagStatus :SET or RESET
-*******************************************************************************/
-FlagStatus RTC_GetFlagStatus(u32 RTC_FLAG)
-{
- if (RTC->SR&RTC_FLAG) return SET;
- else return RESET;
-}
-
-/*******************************************************************************
-* Function Name : RTC_ClearFlag
-* Description : Clears a RTC flag
-* Input : RTC_FLAG
-* Output : None
-* Return : None
-* Note : Before clearing the RTC Periodic Flag you need to disable the
-* Periodic interrupt generation, to do this use function
-* RTC_PeriodicIntConfig(RTC_Per_DISABLE)
-*******************************************************************************/
-void RTC_ClearFlag(u32 RTC_FLAG)
-{
- vu32 tmp=0;
- if (RTC_FLAG == RTC_FLAG_Per) tmp=RTC->SR;
- else if (RTC_FLAG == RTC_FLAG_Alarm) RTC->CR&=~0x100000;
- else if (RTC_FLAG == RTC_FLAG_Tamper) RTC->CR&=~0x1;
-}
-
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/src/91x_scu.c b/uc_str912/prj_template91x/str91x_lib/src/91x_scu.c deleted file mode 100644 index 21116b2..0000000 --- a/uc_str912/prj_template91x/str91x_lib/src/91x_scu.c +++ /dev/null @@ -1,661 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_scu.c
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file provides the SCU library software functions
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
-* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_scu.h"
-
-/* Include of other module interface headers ---------------------------------*/
-/* Local includes ------------------------------------------------------------*/
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-#define SCU_PLLEN 0x80000
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Interface functions -------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/*******************************************************************************
-* Function Name : SCU_MCLKSourceConfig
-* Description : Configures the MCLK source clock
-* Input : MCLK_Source = SCU_MCLK_OSC, SCU_MCLK_PLL or SCU_MCLK_RTC
-* Output : None
-* Return : ErrorStatus: SUCCESS or ERROR
-* Note : this function returns ERROR if trying to select the PLL as
-* clock source while the PLL is disabled or not locked.
-*******************************************************************************/
-ErrorStatus SCU_MCLKSourceConfig(u32 MCLK_Source)
-{
- u32 CLKCNTR_Value;
-
- CLKCNTR_Value = SCU->CLKCNTR; /*get CLKCNTR register value*/
- CLKCNTR_Value &=~0x3; /*clear field MCLKSEL*/
- if (MCLK_Source == SCU_MCLK_PLL) /*PLL selected as clock source*/
- {
- /*check if PLL enabled & locked*/
- if (!((SCU->PLLCONF&SCU_PLLEN)&&(SCU->SYSSTATUS&SCU_FLAG_LOCK)))
- return ERROR;
- }
- else CLKCNTR_Value |=MCLK_Source; /*OSC or RTC selected as clock source*/
- SCU->CLKCNTR = CLKCNTR_Value; /*Update CLKCNTR register value*/
- return SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : SCU_PLLFactorsConfig
-* Description : Sets the PLL factors
-* Input : PLLN, PLLM and PLLP
-* Output : None
-* Return : ErrorStatus: ERROR or SUCCESS
-* Notes : -The PLL factors must respect the PLL specification requirements
-* -The function returns ERROR if trying to change PLL
-* factors while PLL is selected as Main Clock source (MCLK)
-* -This function disables the PLL, to enable the PLL use
-* function" SCU_PLLCmd(ENABLE)" after setting the PLL factors
-******************************************************************************/
-ErrorStatus SCU_PLLFactorsConfig(u8 PLLN, u8 PLLM, u8 PLLP)
-{
- if (SCU_PLLCmd(DISABLE)==SUCCESS) /*Disable PLL*/
- {
- SCU->PLLCONF =0; /*clear PLLCONF register*/
- SCU->PLLCONF |=(PLLN<<8); /*update PLLN field*/
- SCU->PLLCONF |=PLLM; /*update PLLM field*/
- SCU->PLLCONF |=PLLP<<16; /*update PLLP field*/
- return SUCCESS;
- }
- return ERROR;
-}
-
-/*******************************************************************************
-* Function Name : SCU_PLLCmd
-* Description : Enable or Disable the PLL
-* Input : NewState = ENABLE or DISABLE
-* Output : None
-* Return : ErrorStatus: SUCCESS or ERROR
-* Note : -The function returns ERROR if:
-* *trying to disable the PLL while it is selected as the MCLK
-* *trying to enable the PLL while it is already enabled and
-* locked
-*******************************************************************************/
-ErrorStatus SCU_PLLCmd(FunctionalState NewState)
-{
- vu32 i;
- if (NewState==ENABLE)
- {
- if (!((SCU->PLLCONF&SCU_PLLEN)&&(SCU->SYSSTATUS&SCU_FLAG_LOCK)))
- {
- SCU->SYSSTATUS|=SCU_FLAG_LOCK; /*clear LOCK bit*/
- SCU->PLLCONF |=SCU_PLLEN; /*PLL Enable*/
- while(!SCU->SYSSTATUS&SCU_FLAG_LOCK); /*Wait PLL to lock*/
- return SUCCESS;
- }
- else return ERROR;
- }
- else /*NewState = DISABLE*/
- {
- if(SCU->CLKCNTR&0x3) /*check if PLL not sys CLK*/
- {
- for(i=10;i>0;i--); /*delay before PLL disabling*/
- SCU->PLLCONF &=~SCU_PLLEN; /*PLL Disable*/
- return SUCCESS;
- }
- else return ERROR;
- }
-}
-
-/*******************************************************************************
-* Function Name : SCU_RCLKDivisorConfig
-* Description : Sets the RCLK divisor value
-* Input : RCLK_Divisor
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_RCLKDivisorConfig(u32 RCLK_Divisor)
-{
- SCU->CLKCNTR &=SCU_RCLK_Div1; /*clear RCLKDIV[2:0] field*/
- if (RCLK_Divisor!=SCU_RCLK_Div1)
- SCU->CLKCNTR |= RCLK_Divisor; /*update field with RCLK divisor*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_HCLKDivisorConfig
-* Description : Sets the HCLK divisor value
-* Input : HCLK_Divisor
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_HCLKDivisorConfig(u32 HCLK_Divisor)
-{
- SCU->CLKCNTR &=SCU_HCLK_Div1; /*clear AHBDIV[1:0] field*/
- if (HCLK_Divisor!=SCU_HCLK_Div1)
- SCU->CLKCNTR |= HCLK_Divisor; /*update field with HCLK divisor*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_PCLKDivisorConfig
-* Description : Sets the PCLK divisor value
-* Input : PCLK_Divisor
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_PCLKDivisorConfig(u32 PCLK_Divisor)
-{
- SCU->CLKCNTR &=SCU_PCLK_Div1; /*clear APBDIV[1:0] field*/
- if (PCLK_Divisor!=SCU_PCLK_Div1)
- SCU->CLKCNTR |= PCLK_Divisor; /*update field with PCLK Divisor*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_APBPeriphClockConfig
-* Description : Enable the clock for an APB peripheral
-* Input : -APBPerip : APB peripherals(__RTC, __ADC ,...)
-* -NewState : ENABLE or DISABLE
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_APBPeriphClockConfig(u32 APBPeriph, FunctionalState NewState)
-{
- if (NewState==ENABLE) /*Enable clock for APB peripheral*/
- SCU->PCGR1 |=APBPeriph;
- else
- SCU->PCGR1 &=~APBPeriph; /*Disable clock for APB peripheral*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_AHBPeriphClockConfig
-* Description : Enable the clock for an AHB peripheral
-* Input : -AHBPerip: AHB peripherals(__USB, __DMA,...)
-* -NewState : ENABLE or DISABLE
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_AHBPeriphClockConfig(u32 AHBPeriph, FunctionalState NewState)
-{
- if (NewState==ENABLE) /*Enable clock for AHB peripheral*/
- SCU->PCGRO |=AHBPeriph;
- else
- SCU->PCGRO &=~AHBPeriph; /*Disable clock for AHB peripheral*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_APBPeriphReset
-* Description : Assert or deassert Reset on APB peripheral
-* Input : -APBPeriph: APB peripherals(__RTC, __ADC,...)
- -NewState : ENABLE or DISABLE
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_APBPeriphReset(u32 APBPeriph, FunctionalState NewState)
-{
- if (NewState==DISABLE) /*APB peripheral not held in Reset*/
- SCU->PRR1 |=APBPeriph;
- else
- SCU->PRR1 &=~APBPeriph; /*APB peripheral held in Reset*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_AHBPeriphReset
-* Description : Assert or deassert Reset on AHB peripheral
-* Input : -AHBPeriph: AHB peripherals(__USB, __DMA,...)
- -NewState : ENABLE or DISABLE
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_AHBPeriphReset(u32 AHBPeriph, FunctionalState NewState)
-{
- if (NewState==DISABLE)
- SCU->PRR0 |=AHBPeriph; /*AHB peripheral not held in Reset*/
- else
- SCU->PRR0 &=~AHBPeriph; /*AHB peripheral held in Reset*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_APBPeriphIdleConfig
-* Description : Enable or Disable Periph Clock during Idle mode
-* Input : -APBPeriph: APB peripherals(__RTC, __ADC,...)
- -NewState : ENABLE or DISABLE
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_APBPeriphIdleConfig(u32 APBPeriph, FunctionalState NewState)
-{
- if (NewState==ENABLE)
- SCU->MGR1 |=APBPeriph; /*APB peripheral clock enabled during Idle mode*/
- else
- SCU->MGR1 &=~APBPeriph; /*APB peripheral clock disabled during Idle mode*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_AHBPeriphIdleConfig
-* Description : Enable or Disable Periph Clock during Idle mode
-* Input : -AHBPeriph: AHB peripherals(__USB, __DMA,...)
- -NewState : ENABLE or DISABLE
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_AHBPeriphIdleConfig(u32 AHBPeriph, FunctionalState NewState)
-{
- if (NewState==ENABLE)
- SCU->MGR0 |=AHBPeriph; /*AHB peripheral clock enabled during Idle mode*/
- else
- SCU->MGR0 &=~AHBPeriph; /*AHB peripheral clock disabled during Idle mode*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_APBPeriphDebugConfig
-* Description : Enable or Disable Periph Clock during ARM debug state
-* Input : -APBPeriph: APB peripherals(__RTC, __ADC,...)
- -NewState : ENABLE or DISABLE
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_APBPeriphDebugConfig(u32 APBPeriph, FunctionalState NewState)
-{
- if (NewState==ENABLE)
- SCU->PECGR1 |=APBPeriph; /*APB peripheral clock enabled during ARM debug state*/
- else
- SCU->PECGR1 &=~APBPeriph; /*APB peripheral clock disabled during ARM debug state*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_AHBPeriphDebugConfig
-* Description : Enable or Disable Periph Clock during ARM debug state
-* Input : -AHBPeriph: AHB peripherals(__USB, __DMA,...)
- -NewState : ENABLE or DISABLE
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_AHBPeriphDebugConfig(u32 AHBPeriph, FunctionalState NewState)
-{
- if (NewState==ENABLE)
- SCU->PECGR0 |=AHBPeriph; /*AHB peripheral clock enabled during ARM debug state*/
- else
- SCU->PECGR0 &=~AHBPeriph; /*AHB peripheral clock disabled during ARM debug state*/
-}
-/*******************************************************************************
-* Function Name : SCU_BRCLKDivisorConfig
-* Description : Sets the BRCLK divisor value
-* Input : BRCLK_Divisor
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_BRCLKDivisorConfig(u32 BRCLK_Divisor)
-{
- SCU->CLKCNTR &=SCU_BRCLK_Div1; /*Clear BRSEL bit*/
- if (BRCLK_Divisor!=SCU_BRCLK_Div1)
- SCU->CLKCNTR |= SCU_BRCLK_Div2; /*set bit BRSEL*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_TIMCLKSourceConfig
-* Description : Sets the TIMx clock source
-* Input : - TIMx : SCU_TIM01 or SCU_TIM23
-* - TIMCLK_Source = SCU_TIMCLK_EXT or SCU_TIMCLK_INT
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_TIMCLKSourceConfig(u8 TIMx, u32 TIMCLK_Source)
-{
- if (TIMx== SCU_TIM01) /*TIM01 clock source configuration*/
- {
- SCU->CLKCNTR &=0xFFFFDFFF;
- if (TIMCLK_Source == SCU_TIMCLK_EXT)
- SCU->CLKCNTR |=0x2000;
- }
- else
- {
- SCU->CLKCNTR &=0xFFFFBFFF; /*TIM23 clock source configuration*/
- if (TIMCLK_Source == SCU_TIMCLK_EXT)
- SCU->CLKCNTR |=0x4000;
- }
-}
-
-/*******************************************************************************
-* Function Name : SCU_TIMPresConfig
-* Description : Sets the TIMx Prescaler Value
-* Input : - TIMx : SCU_TIM01 or SCU_TIM23
-* - Prescaler (16 bit value)
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_TIMPresConfig(u8 TIMx, u16 Prescaler)
-{
- if (TIMx==SCU_TIM01) /*TIM01 Prescaler configuration*/
- SCU->SCR1 = Prescaler&0xFFFF;
- else
- SCU->SCR2 = Prescaler&0xFFFF; /*TIM23 Prescaler configuration*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_USBCLKConfig
-* Description : Configures the clock source for the 48MHz USBCLK
-* Input : USBCLK_Source: SCU_USBCLK_MCLK,SCU_USBCLK_MCLK2 or SCU_USBCLK_EXT
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_USBCLKConfig(u32 USBCLK_Source)
-{
- SCU->CLKCNTR &=SCU_USBCLK_MCLK; /*clear USBSEL[1:0] field*/
- if (USBCLK_Source!=SCU_USBCLK_MCLK)
- SCU->CLKCNTR |= USBCLK_Source; /*update field with USBCLK_Source*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_PHYCLKConfig
-* Description : Enable or Disable PHY clock output
-* Input : NewState : ENABLE or DISABLE
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_PHYCLKConfig(FunctionalState NewState)
-{
- if (NewState==ENABLE)
- SCU->CLKCNTR |= 0x1000; /*enable MIIPHY clock*/
- else
- SCU->CLKCNTR &=~0x1000; /*disable MIIPHY clock*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_FMICLKDivisorConfig
-* Description : Set the FMI clock divisor
-* Input : FMICLK_Divisor: SCU_FMICLK_Div1 or SCU_FMICLK_DIV2
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_FMICLKDivisorConfig(u32 FMICLK_Divisor)
-{
- SCU->CLKCNTR &=SCU_FMICLK_Div1; /*FMICLK = RCLK*/
- if (FMICLK_Divisor!=SCU_FMICLK_Div1)
- SCU->CLKCNTR |=SCU_FMICLK_Div2; /*FMICLK = RCLK/2 */
-}
-
-/*******************************************************************************
-* Function Name : SCU_EMIBCLKDivisorConfig
-* Description : Set the EMI Bus clock divisor: EMIBCLK = HCLK or HCLK/2
-* Input : SCU_EMICLK: SCU_EMIBCLK_Div1 , SCU_EMIBCLK_Div2
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_EMIBCLKDivisorConfig(u32 SCU_EMIBCLK)
-{
- SCU->CLKCNTR &=SCU_EMIBCLK_Div1; /*EMIBCLK = HCLK */
- if (SCU_EMIBCLK!=SCU_EMIBCLK_Div1)
- SCU->CLKCNTR |= SCU_EMIBCLK_Div2; /*EMIBCLK = HCLK/2 */
-}
-
-/*******************************************************************************
-* Function Name : SCU_EMIModeConfig
-* Description : Configure the EMI as Multiplexed or Demultiplexed
-* Input : SCU_EMIMODE : SCU_EMI_MUX or SCU_EMI_DEMUX
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_EMIModeConfig(u32 SCU_EMIMODE)
-{
- SCU->SCR0 &=SCU_EMI_MUX; /*EMI mode = Multiplexed*/
- if (SCU_EMIMODE!=SCU_EMI_MUX)
- SCU->SCR0 |= SCU_EMI_DEMUX; /*EMI mode = Demultiplexed*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_EMIALEConfig
-* Description : Configure the ALE signal (length & polarity)
-* Input : -SCU_EMIALE_LEN : SCU_EMIALE_LEN1 or SCU_EMIALE_LEN2
-* -SCU_EMIALE_POL : SCU_EMIALE_POLLow or SCU_EMI_POLHigh
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_EMIALEConfig(u32 SCU_EMIALE_LEN, u32 SCU_EMIALE_POL)
-{
- /*Configure EMI ALE Length*/
- SCU->SCR0 &=SCU_EMIALE_LEN1;
- if (SCU_EMIALE_LEN!=SCU_EMIALE_LEN1)
- SCU->SCR0 |= SCU_EMIALE_LEN2;
-
- /*Configure EMI ALE POL*/
- SCU->SCR0 &=SCU_EMIALE_POLLow;
- if (SCU_EMIALE_POL!=SCU_EMIALE_POLLow)
- SCU->SCR0 |= SCU_EMIALE_POLHigh;
-}
-
-/*******************************************************************************
-* Function Name : SCU_ITConfig
-* Description : ENBALE or DISABLE an SCU interrupt
-* Input : -SCU_IT: interrupt mask
-* -NewState: ENABLE or DISABLE
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_ITConfig(u32 SCU_IT, FunctionalState NewState)
-{
- if (NewState==ENABLE)
- SCU->ITCMSK&=~SCU_IT; /*IT enable */
- else
- SCU->ITCMSK|=SCU_IT; /*IT disable( mask)*/
-}
-
-/*******************************************************************************
-* Function Name : SCU_GetFlagStatus
-* Description : Returns flag status
-* Input : SCU_Flag
-* Output : NONE
-* Return : SET or RESET
-*******************************************************************************/
-FlagStatus SCU_GetFlagStatus(u32 SCU_Flag)
-{
- if (SCU->SYSSTATUS&SCU_Flag)
- return SET;
- else return RESET;
-}
-
-/*******************************************************************************
-* Function Name : SCU_ClearFlag
-* Description : Clears a SYSTATUS Flag
-* Input : SCU_Flag
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_ClearFlag(u32 SCU_Flag)
-{
- SCU->SYSSTATUS = SCU_Flag;
-}
-/*******************************************************************************
-* Function Name : SCU_GetPLLfreqValue
-* Description : Gets the current PLL frequency
-* Input : None
-* Output : None
-* Return : PLL frequency (KHz)
-*******************************************************************************/
-u32 SCU_GetPLLFreqValue(void)
-{
- u8 PLL_M;
- u8 PLL_N;
- u8 PLL_P;
-
- PLL_M = SCU->PLLCONF&0xFF;
- PLL_N = (SCU->PLLCONF&0xFF00)>>8;
- PLL_P = (SCU->PLLCONF&0x70000)>>16;
-
- if ((PLL_M>0)&&(PLL_N>0))
- return (u32)(((_Main_Crystal*2)*PLL_N)/(PLL_M<<PLL_P));
-
- else return 0;
-}
-/*******************************************************************************
-* Function Name : SCU_GetMCLKFreqValue
-* Description : Gets the current MCLK frequency
-* Input : None
-* Output : None
-* Return : MCLK frequency (KHz)
-*******************************************************************************/
-u32 SCU_GetMCLKFreqValue(void)
-{
- if ((SCU->CLKCNTR&0x3) == 0x2) return (u32)(_Main_Crystal);
- if ((SCU->CLKCNTR&0x3) == 0x1) return (u32)(32);
- else return (SCU_GetPLLFreqValue());
-}
-
-/*******************************************************************************
-* Function Name : SCU_GetRCLKFreqValue
-* Description : Gets the current RCLK frequency
-* Input : None
-* Output : None
-* Return : RCLK frequency (KHz)
-*******************************************************************************/
-u32 SCU_GetRCLKFreqValue(void)
-{
- u8 RCLK_Div;
- RCLK_Div = (SCU->CLKCNTR&0x1C)>>2;
- if (RCLK_Div==0x5) RCLK_Div=10;
- return (u32)(SCU_GetMCLKFreqValue() >>RCLK_Div);
-}
-
-/*******************************************************************************
-* Function Name : SCU_GetHCLKFreqValue
-* Description : Gets the current PCLK frequency
-* Input : None
-* Output : None
-* Return : HCLK frequency (KHz)
-*******************************************************************************/
-u32 SCU_GetHCLKFreqValue(void)
-{
- u8 HCLK_Div;
- HCLK_Div = (SCU->CLKCNTR&0x60)>>5;
- return (u32)(SCU_GetRCLKFreqValue() >>HCLK_Div);
-}
-
-/*******************************************************************************
-* Function Name : SCU_GetPCLKFreqValue
-* Description : Gets the current HCLK frequency
-* Input : None
-* Output : None
-* Return : PCLK frequency (KHz)
-*******************************************************************************/
-u32 SCU_GetPCLKFreqValue(void)
-{
- u8 PCLK_Div;
- PCLK_Div = (SCU->CLKCNTR&0x180)>>7;
- return (u32)(SCU_GetRCLKFreqValue() >>PCLK_Div);
-}
-
-/*******************************************************************************
-* Function Name : SCU_WakeUpLineConfig
-* Description : Configures an External interrupt as WakeUp line
-* Input : EXTint : 0 -> 31
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_WakeUpLineConfig(u8 EXTint)
-{
- if (EXTint < 8)
- {
- SCU->WKUPSEL&=~0x7;
- SCU->WKUPSEL|=EXTint;
- }
- else if (EXTint<16)
- {
- SCU->WKUPSEL&=~0x38;
- SCU->WKUPSEL|=(EXTint-8)<<3;
- }
- else if (EXTint<24)
- {
- SCU->WKUPSEL&=~0x1C0;
- SCU->WKUPSEL|=(EXTint-16)<<6;
- }
- else
- {
- SCU->WKUPSEL&=~0xE00;
- SCU->WKUPSEL|=(EXTint-24)<<9;
- }
-}
-
-/*******************************************************************************
-* Function Name : SCU_SpecIntRunModeConfig
-* Description : Enables or Disables the Special Run mode
-* Input : newstate = ENABLE or DISABLE
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_SpecIntRunModeConfig(FunctionalState NewState)
-{
- if (NewState == ENABLE)
- SCU->PWRMNG |=0x8;
- else
- SCU->PWRMNG &=~0x8;
-}
-/*******************************************************************************
-* Function Name : SCU_EnterIdleMode
-* Description : Enters in Idle mode
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_EnterIdleMode(void)
-{
- SCU->PWRMNG |=0x1;
-}
-/*******************************************************************************
-* Function Name : SCU_EnterSleepMode
-* Description : Enters in Sleep mode
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_EnterSleepMode(void)
-{
- SCU->PWRMNG |=0x2;
-}
-
-/*******************************************************************************
-* Function Name : SCU_UARTIrDAConfig
-* Description : Enable or Disable the Irda mode for UARTx
-* Input : - UARTx :x=0,1 or 2
-* - UART_IrDA_Mode : SCU_UARTMode_IrDA or SCU_UARTMode_UART
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_UARTIrDASelect(UART_TypeDef * UARTx, u8 UART_IrDA_Mode)
-{
- if (UART_IrDA_Mode == SCU_UARTMode_IrDA)
- {
- if (UARTx== UART0) SCU->SCR0 |=0x400;
- else if (UARTx==UART1) SCU->SCR0 |=0x800;
- else SCU->SCR0 |=0x1000;
- }
- else
- {
- if (UARTx== UART0) SCU->SCR0 &=~0x400;
- else if (UARTx==UART1) SCU->SCR0 &=~0x800;
- else SCU->SCR0 &=~0x1000;
- }
-}
-/*******************************************************************************
-* Function Name : SCU_PFQBCCmd
-* Description : Enable or Disable PFQBC
-* Input : NewState : ENABLE or DISABLE
-* Output : None
-* Return : None
-*******************************************************************************/
-void SCU_PFQBCCmd(FunctionalState NewState)
-{
- if (NewState==ENABLE)
- SCU->SCR0 |=0x1;
- else SCU->SCR0 &=~0x1;
-}
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/src/91x_ssp.c b/uc_str912/prj_template91x/str91x_lib/src/91x_ssp.c deleted file mode 100644 index 06bf30c..0000000 --- a/uc_str912/prj_template91x/str91x_lib/src/91x_ssp.c +++ /dev/null @@ -1,469 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_ssp.c
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file provides all the SSP software functions.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_ssp.h"
-#include "91x_scu.h"
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-
-/* SSP peripheral Enable */
-#define SSP_Enable 0x0002
-#define SSP_Disable 0xFFFD
-
-/* SSP Loop Back Mode Enable */
-#define SSP_LoopBackMode_Enable 0x0001
-#define SSP_LoopBackMode_Disable 0xFFFE
-
-/* SSP Flag Mask */
-#define SSP_Flag_Mask 0x001F
-
-/* SSP DMA transmit/ receive enable/disable Masks */
-#define SSP_DMA_TransmitEnable 0x0002
-#define SSP_DMA_TransmitDisable 0xFFFD
-#define SSP_DMA_ReceiveEnable 0x0001
-#define SSP_DMA_ReceiveDisable 0xFFFE
-
-/* SSP Masks */
-#define SSP_FrameFormat_Mask 0xFFCF
-#define SSP_DataSize_Mask 0xFFF0
-#define SSP_ClockRate_Mask 0x00FF
-#define SSP_ClockPrescaler_Mask 0xFF00
-
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/*******************************************************************************
-* Function Name : SSP_DeInit
-* Description : Deinitializes the SSPx peripheral registers to their default
-* reset values.
-* Input : SSPx: where x can be 0 or 1 to select the SSP peripheral.
-* Output : None
-* Return : None
-*******************************************************************************/
-void SSP_DeInit(SSP_TypeDef* SSPx)
-{
- if(SSPx == SSP0)
- {
- /* Reset the SSP0 registers values*/
- SCU_APBPeriphReset(__SSP0,ENABLE);
- SCU_APBPeriphReset(__SSP0,DISABLE);
- }
- else if (SSPx == SSP1)
- {
- /* Reset the SSP1 registers values*/
- SCU_APBPeriphReset(__SSP1,ENABLE);
- SCU_APBPeriphReset(__SSP1,DISABLE);
- }
-}
-
-/*******************************************************************************
-* Function Name : SSP_Init
-* Description : Initializes the SSPx peripheral according to the specified
-* parameters in the SSP_InitTypeDef structure.
-* Input : - SSPx: where x can be 0 or 1 to select the SSP peripheral.
-* - SSP_InitStruct: pointer to a SSP_InitTypeDef structure that
-* contains the configuration information for the specified SSP
-* peripheral.
-* Output : None
-* Return : None
-*******************************************************************************/
-void SSP_Init(SSP_TypeDef* SSPx, SSP_InitTypeDef* SSP_InitStruct)
-{
- if(SSP_InitStruct->SSP_FrameFormat == SSP_FrameFormat_Motorola)
- {
- /* Set the Motorola frame format */
- SSPx->CR0 &= SSP_FrameFormat_Motorola;
- /* Configure the Clock polarity */
- if(SSP_InitStruct->SSP_CPOL == SSP_CPOL_High)
- {
- /* SCK is held high when no data is being transfered */
- SSPx->CR0 |= SSP_CPOL_High;
- }
- else
- {
- /* SCK is held low when no data is being transfered */
- SSPx->CR0 &= SSP_CPOL_Low;
- }
- /* Configure the Clock Phase */
- if(SSP_InitStruct->SSP_CPHA == SSP_CPHA_2Edge)
- {
- /* Data captured on second clock edge */
- SSPx->CR0 |= SSP_CPHA_2Edge;
- }
- else
- {
- /* Data captured on first clock edge */
- SSPx->CR0 &= SSP_CPHA_1Edge;
- }
- }
- /* Configure the Frame format */
- else
- {
- /* Clear the FRF[1:0] bits */
- SSPx->CR0 &= SSP_FrameFormat_Mask;
- /* Set the TI frame format */
- SSPx->CR0 |= SSP_InitStruct->SSP_FrameFormat;
- }
- /* Configure the Mode */
- if(SSP_InitStruct->SSP_Mode == SSP_Mode_Slave)
- {
- /* Set the slave mode */
- SSPx->CR1 |= SSP_Mode_Slave;
- /* Configure the Slave output */
- if(SSP_InitStruct->SSP_SlaveOutput == SSP_SlaveOutput_Disable)
- {
- /* Slave output disabled */
- SSPx->CR1 |= SSP_SlaveOutput_Disable;
- }
- else
- {
- /* Slave output enabled */
- SSPx->CR1 &= SSP_SlaveOutput_Enable;
- }
- }
- else
- {
- /* Set the master mode */
- SSPx->CR1 &= SSP_Mode_Master;
- /* Clear clock rate SCR[7:0] bits */
- SSPx->CR0 &= SSP_ClockRate_Mask;
- /* Set the serial clock rate */
- SSPx->CR0 |= (SSP_InitStruct->SSP_ClockRate<<8);
- /* Clear clock prescaler CPSDVSR[7:0] bits */
- SSPx->PR &= SSP_ClockPrescaler_Mask;
- /* Set the serial clock prescaler */
- SSPx->PR |= SSP_InitStruct->SSP_ClockPrescaler;
- }
-
- /* Clear data size DSS[3:0] bits */
- SSPx->CR0 &= SSP_DataSize_Mask;
- /* Set the data size */
- SSPx->CR0 |= SSP_InitStruct->SSP_DataSize;
-}
-/*******************************************************************************
-* Function Name : SSP_StructInit
-* Description : Fills in a SSP_InitTypeDef structure with the reset value of
-* each parameter.
-* Input : SSP_InitStruct : pointer to a SSP_InitTypeDef structure
- which will be initialized.
-* Output : None
-* Return : None
-*******************************************************************************/
-void SSP_StructInit(SSP_InitTypeDef* SSP_InitStruct)
-{
- /* Initialize the SSP_FrameFormat member */
- SSP_InitStruct->SSP_FrameFormat = SSP_FrameFormat_Motorola;
-
- /* Initialize the SSP_Mode member */
- SSP_InitStruct->SSP_Mode = SSP_Mode_Master;
-
- /* Initialize the SSP_CPOL member */
- SSP_InitStruct->SSP_CPOL = SSP_CPOL_Low;
-
- /* Initialize the SSP_CPHA member */
- SSP_InitStruct->SSP_CPHA = SSP_CPHA_1Edge;
-
- /* Initialize the SSP_DataSize member */
- SSP_InitStruct->SSP_DataSize = SSP_DataSize_8b;
-
- /* Initialize the SSP_SlaveOutput member */
- SSP_InitStruct->SSP_SlaveOutput = SSP_SlaveOutput_Enable;
-
- /* Initialize the SSP_ClockRate member */
- SSP_InitStruct->SSP_ClockRate = 0;
-
- /* Initialize the SSP_ClockPrescaler member */
- SSP_InitStruct->SSP_ClockPrescaler = 0;
-}
-
-/*******************************************************************************
-* Function Name : SSP_Cmd
-* Description : Enables or disables the specified SSP peripheral.
-* Input : - SSPx: where x can be 0 or 1 to select the SSP peripheral.
-* - NewState: new state of the SSPx peripheral. This parameter
-* can be: ENABLE or DISABLE.
-* Output : None
-* Return : None
-*******************************************************************************/
-void SSP_Cmd(SSP_TypeDef* SSPx, FunctionalState NewState)
-{
- if(NewState == ENABLE)
- {
- /* Enable the SSP peripheral */
- SSPx->CR1 |= SSP_Enable;
- }
- else
- {
- /* Disable the SSP peripheral */
- SSPx->CR1 &= SSP_Disable;
- }
-}
-
-/*******************************************************************************
-* Function Name : SSP_ITConfig
-* Description : Enables or disables the specified SSP interrupts.
-* Input : - SSPx: where x can be 0 or 1 to select the SSP peripheral.
-* - SSP_IT: specifies the SSP interrupts sources to be enabled
-* or disabled. This parameter can be any combination of the
-* following values:
-* - SSP_IT_TxFifo: Transmit FIFO half empty or less interrupt
-* - SSP_IT_RxFifo: Receive FIFO half full or less interrupt
-* - SSP_IT_RxTimeOut: Receive timeout interrupt
-* - SSP_IT_RxOverrun: Receive overrun interrupt
-* - NewState: new state of the specified SSP interrupts.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None
-* Return : None
-*******************************************************************************/
-void SSP_ITConfig(SSP_TypeDef* SSPx, u16 SSP_IT, FunctionalState NewState)
-{
- if(NewState == ENABLE)
- {
- /* Enable the selected SSP interrupts */
- SSPx->IMSCR |= SSP_IT;
- }
- else
- {
- /* Disable the selected SSP interrupts */
- SSPx->IMSCR &= ~SSP_IT;
- }
-}
-
-/*******************************************************************************
-* Function Name : SSP_DMACmd
-* Description : Configures the SSP0 DMA interface.
-* Input : - SSPx: where x can be 0 or 1 to select the SSP peripheral.
-* - SSP_DMATransfert : specifies the DMA transfert to be
-* enabled or disabled. This parameter can be one of the
-* following values:
-* - SSP_DMA_Transmit: transmit Fifo DMA transfert
-* - SSP_DMA_Receive : receive Fifo DMA transfert
-* - NewState: new state of the DMA transfert.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None
-* Return : None
-*******************************************************************************/
-void SSP_DMACmd(SSP_TypeDef* SSPx, u16 SSP_DMATransfert, FunctionalState NewState)
-{
- if(NewState == ENABLE)
- {
- if(SSP_DMATransfert == SSP_DMA_Transmit)
- {
- /* Enable DMA for the transmit FIFO */
- SSPx->DMACR |= SSP_DMA_TransmitEnable;
- }
- else
- {
- /* Enable DMA for the receive FIFO */
- SSPx->DMACR |= SSP_DMA_ReceiveEnable;
- }
- }
- else
- {
- if(SSP_DMATransfert == SSP_DMA_Transmit)
- {
- /* Disable DMA for the transmit FIFO */
- SSPx->DMACR &= SSP_DMA_TransmitDisable;
- }
- else
- {
- /* Disable DMA for the receive FIFO */
- SSPx->DMACR &= SSP_DMA_ReceiveDisable;
- }
- }
-}
-
-/*******************************************************************************
-* Function Name : SSP_SendData.
-* Description : Transmits a Data through the SSP peripheral.
-* Input : - SSPx: where x can be 0 or 1 to select the SSP peripheral.
-* - Data : Data to be transmitted.
-* Output : None
-* Return : None
-*******************************************************************************/
-void SSP_SendData(SSP_TypeDef* SSPx, u16 Data)
-{
- /* Write in the DR register the data to be sent */
- SSPx->DR = Data;
-}
-
-/*******************************************************************************
-* Function Name : SSP_ReceiveData.
-* Description : Returns the most recent received data by the SSP peripheral.
-* Input : SSPx: where x can be 0 or 1 to select the SSP peripheral.
-* Output : None
-* Return : The value of the received data.
-*******************************************************************************/
-u16 SSP_ReceiveData(SSP_TypeDef* SSPx)
-{
- /* Return the data in the DR register */
- return SSPx->DR;
-}
-
-/*******************************************************************************
-* Function Name : SSP_LoopBackMode
-* Description : Enable or disable the Loop back mode for the selected SSPx peripheral.
-* Input : - SSPx: where x can be 0 or 1 to select the SSP peripheral.
-* - NewState: new state of the Loop Back mode.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None
-* Return : None.
-*******************************************************************************/
-void SSP_LoopBackMode(SSP_TypeDef* SSPx, FunctionalState NewState)
-{
- if(NewState == ENABLE)
- {
- /* Enable loop back mode */
- SSPx->CR1 |= SSP_LoopBackMode_Enable;
- }
- else
- {
- /* Disable loop back mode */
- SSPx->CR1 &= SSP_LoopBackMode_Disable;
- }
-}
-
-
-
-/*******************************************************************************
-* Function Name : SSP_GetFlagStatus
-* Description : Checks whether the specified SSP flag is set or not.
-* Input : - SSPx: where x can be 0 or 1 to select the SSP peripheral.
-* - SSP_FLAG: flag to check. This parameter can be one of the
-* following values:
-* - SSP_FLAG_Busy: busy flag
-* - SSP_FLAG_RxFifoFull: Receive FIFO full flag
-* - SSP_FLAG_RxFifoNotEmpty: Receive FIFO not empty flag
-* - SSP_FLAG_TxFifoNotFull: Transmit FIFO not full flag
-* - SSP_FLAG_TxFifoEmpty: Transmit FIFO empty flag
-* - SSP_FLAG_TxFifo: Transmit FIFO half empty or less flag
-* - SSP_FLAG_RxFifo: Receive FIFO half full or less flag
-* - SSP_FLAG_RxTimeOut: Receive timeout flag
-* - SSP_FLAG_RxOverrun: Receive overrun flag
-* Output : None
-* Return : The new state of SSP_Flag (SET or RESET).
-*******************************************************************************/
-FlagStatus SSP_GetFlagStatus(SSP_TypeDef* SSPx, u16 SSP_FLAG)
-{
- u32 SSPReg = 0, FlagPos = 0;
- u32 StatusReg = 0;
-
- /* Get the SSP register index */
- SSPReg = SSP_FLAG >> 5;
-
- /* Get the flag position */
- FlagPos = SSP_FLAG & SSP_Flag_Mask;
-
- /* Find the register of the flag to check */
- if(SSPReg == 1)
- {
- /* The flag to check is in SR register */
- StatusReg = SSPx->SR;
- }
- else if (SSPReg == 2)
- {
- /* The flag to check is in RISR register */
- StatusReg = SSPx->RISR;
- }
-
- /* Check the status of the specified SSP flag */
- if((StatusReg & (1 << FlagPos)) != RESET)
- {
- /* Return SET if the SSP flag is set */
- return SET;
- }
- else
- {
- /* Return RESET if the SSP flag is reset */
- return RESET;
- }
-}
-
-/*******************************************************************************
-* Function Name : SSP_ClearFlag
-* Description : Clears the SSPx flags.
-* Input : - SSPx: where x can be 0 or 1 to select the SSP peripheral.
-* - SSP_FLAG: flags to clear. This parameter one of the
-* following values:
-* - SSP_FLAG_RxTimeOut: Receive timeout flag
-* - SSP_FLAG_RxOverrun: Receive overrun flag
-* Output : None
-* Return : None
-*******************************************************************************/
-void SSP_ClearFlag(SSP_TypeDef* SSPx, u16 SSP_FLAG)
-{
- u8 FlagPos = 0;
-
- /* Get the flag position */
- FlagPos = SSP_FLAG & SSP_Flag_Mask;
-
- /* Clear the selected SSP flag */
- SSPx->ICR = (1 << FlagPos);
-}
-
-/*******************************************************************************
-* Function Name : SSP_GetITStatus
-* Description : Checks whether the specified SSP interrupt flag is set or not.
-* Input : - SSPx: where x can be 0 or 1 to select the SSP peripheral.
-* - SSP_IT: interrupt flag to check. This parameter can be one
-* of the following values:
-* - SSP_IT_TxFifo: Transmit FIFO half empty or less interrupt
-* - SSP_IT_RxFifo: Receive FIFO half full or less interrupt
-* - SSP_IT_RxTimeOut: Receive timeout interrupt
-* - SSP_IT_RxOverrun: Receive overrun interrupt
-* Output : None
-* Return : The new state of SSP_IT flag (SET or RESET).
-*******************************************************************************/
-ITStatus SSP_GetITStatus(SSP_TypeDef* SSPx, u16 SSP_IT)
-{
- /* Check the status of the specified interrupt flag */
- if((SSPx->MISR & SSP_IT) != RESET)
- {
- /* Return SET if the SSP interrupt flag is set */
- return SET;
- }
- else
- {
- /* Return RESET if SSP interrupt flag is reset */
- return RESET;
- }
-}
-
-/*******************************************************************************
-* Function Name : SSP_ClearITPendingBit
-* Description : Clears the pending interrupt flags.
-* Input : - SSPx: where x can be 0 or 1 to select the SSP peripheral.
-* - SSP_IT: interrupts pending bits to clear. This parameter
-* can be any combination of the following values:
-* - SSP_IT_RxTimeOut: Receive timeout interrupt
-* - SSP_IT_RxOverrun: Receive overrun interrupt
-* Output : None
-* Return : None
-*******************************************************************************/
-void SSP_ClearITPendingBit(SSP_TypeDef* SSPx, u16 SSP_IT)
-{
- /* Clear the selected SSP interrupts pending bits */
- SSPx->ICR = SSP_IT;
-}
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
-
diff --git a/uc_str912/prj_template91x/str91x_lib/src/91x_tim.c b/uc_str912/prj_template91x/str91x_lib/src/91x_tim.c deleted file mode 100644 index 7957168..0000000 --- a/uc_str912/prj_template91x/str91x_lib/src/91x_tim.c +++ /dev/null @@ -1,694 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_tim.c
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file provides all the TIM software functions.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
-* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_tim.h"
-
-/* Include of other module interface headers ---------------------------------*/
-/* Local includes ------------------------------------------------------------*/
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-
-/* TIM Bits Masks */
-
-#define TIM_PWM_MASK 0x0010
-#define TIM_OPM_MASK 0x0020
-#define TIM_OC1_ENABLE_MASK 0x0040
-#define TIM_OC1_DISABLE_MASK 0xFFBF
-#define TIM_OC2_ENABLE_MASK 0x0080
-#define TIM_OC2_DISABLE_MASK 0xFF7F
-
-#define TIM_OLVL1_SET_MASK 0x0100
-#define TIM_OLVL1_RESET_MASK 0xFEFF
-
-#define TIM_OLVL2_SET_MASK 0x0200
-#define TIM_OLVL2_RESET_MASK 0xFDFF
-
-#define TIM_ENABLE_MASK 0x8000
-#define TIM_DISABLE_MASK 0x7FFF
-
-#define TIM_DMA_CLEAR_MASK 0xCFFF
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Interface functions -------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/*******************************************************************************
-* Function Name : TIM_DeInit
-* Description : Initializes TIM peripheral control and registers to their
-* : default reset values.
-* Input : TIMx: where x can be from 0 to 3 to select the TIM
-* peripheral.
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM_DeInit(TIM_TypeDef *TIMx)
-{
- if((TIMx == TIM0)||(TIMx == TIM1))
- {
- SCU_APBPeriphReset(__TIM01, DISABLE); /* TIM0 & TIM1 Reset's off */
- }
- else
- {
- SCU_APBPeriphReset(__TIM23, DISABLE); /* TIM2 & TIM3 Reset's off */
- }
-
- /* Set all the TIMx registers to thier default values */
- TIMx->OC1R = 0x8000;
- TIMx->OC2R = 0x8000;
- TIMx->CR1 = 0x0;
- TIMx->CR2 = 0x1;
- TIMx->CNTR = 0x1234;
- TIMx->SR = 0x0;
-}
-
-/*******************************************************************************
-* Function Name : TIM_StructInit
-* Description : Fills in a TIM_InitTypeDef structure with the reset value of
-* each parameter.
-* Input : TIM_InitStruct : pointer to a TIM_InitTypeDef structure
- which will be initialized.
-* Output : None
-* Return : None.
-*******************************************************************************/
-void TIM_StructInit(TIM_InitTypeDef *TIM_InitStruct)
-{
- TIM_InitStruct->TIM_Mode = 0x0000;
- TIM_InitStruct->TIM_OC1_Modes = 0x0000;
- TIM_InitStruct->TIM_OC2_Modes = 0x0000;
- TIM_InitStruct->TIM_Clock_Source = 0x0000;
- TIM_InitStruct->TIM_Clock_Edge = 0x0000;
- TIM_InitStruct->TIM_OPM_INPUT_Edge = 0x0000;
- TIM_InitStruct->TIM_ICAP1_Edge = 0x0000;
- TIM_InitStruct->TIM_ICAP2_Edge = 0x0000;
- TIM_InitStruct->TIM_Prescaler = 0x0000;
- TIM_InitStruct->TIM_Pulse_Level_1 = 0x0000;
- TIM_InitStruct->TIM_Pulse_Level_2 = 0x0000;
- TIM_InitStruct->TIM_Period_Level = 0x0000;
- TIM_InitStruct->TIM_Pulse_Length_1 = 0x0000;
- TIM_InitStruct->TIM_Pulse_Length_2 = 0x0000;
- TIM_InitStruct->TIM_Full_Period = 0x0000;
-}
-
-/*******************************************************************************
-* Function Name : TIM_Init
-* Description : Initializes TIM peripheral according to the specified
-* parameters in the TIM_InitTypeDef structure.
-* Input1 : TIMx: where x can be from 0 to 3 to select the TIM
-* peripheral.
-* Input2 : TIM_InitStruct: pointer to a TIM_InitTypeDef structure that
-* contains the configuration information for the specified
-* TIM peripheral.
-* Output : None
-* Return : None
-*******************************************************************************/
-
-void TIM_Init(TIM_TypeDef *TIMx, TIM_InitTypeDef *TIM_InitStruct)
-{
-/***************************** Clock configuration ****************************/
-
- if (TIM_InitStruct->TIM_Clock_Source == TIM_CLK_APB)
- {
- /* APB clock */
- TIMx->CR1 &= TIM_CLK_APB;
- }
- else
- {
- /* External/SCU clock */
- TIMx->CR1 |= TIM_CLK_EXTERNAL;
- if (TIM_InitStruct->TIM_Clock_Edge == TIM_CLK_EDGE_RISING)
- {
- /* Clock rising edge */
- TIMx->CR1 |= TIM_CLK_EDGE_RISING;
- }
- else
- {
- /* Clock falling edge */
- TIMx->CR1 &= TIM_CLK_EDGE_FALLING;
- }
- }
-
-/************************** Prescaler configuration ***************************/
-
- TIMx->CR2 =( TIMx->CR2 & 0xFF00 )|TIM_InitStruct->TIM_Prescaler ;
-
-/********************************** TIM Modes *********************************/
-
- switch ( TIM_InitStruct->TIM_Mode)
- {
-/******************************* PWM Input mode *******************************/
-
- case TIM_PWMI:
-
- /* Set the PWMI Bit */
- TIMx->CR1 |= TIM_PWMI;
-
- /* Set the first edge Level */
- if ( TIM_InitStruct->TIM_ICAP1_Edge == TIM_ICAP1_EDGE_RISING)
- {
- TIMx->CR1 |= TIM_ICAP1_EDGE_RISING;
- }
- else
- {
- TIMx->CR1 &= TIM_ICAP1_EDGE_FALLING;
- }
-
- /* Set the Second edge Level ( Opposite of the first level ) */
- if ( TIM_InitStruct->TIM_ICAP1_Edge == TIM_ICAP1_EDGE_RISING)
- {
- TIMx->CR1 &= TIM_ICAP2_EDGE_FALLING;
- }
- else
- {
- TIMx->CR1 |= TIM_ICAP2_EDGE_RISING;
- }
-
- break;
-
-/************************** Output compare channel 1 **************************/
-
- case TIM_OCM_CHANNEL_1:
-
- if (TIM_InitStruct->TIM_Pulse_Level_1 == TIM_HIGH)
- {
- TIMx->CR1 |= TIM_OLVL1_SET_MASK;
- }
- else
- {
- TIMx->CR1 &= TIM_OLVL1_RESET_MASK;
- }
-
- TIMx->OC1R = TIM_InitStruct->TIM_Pulse_Length_1;
-
- if (TIM_InitStruct->TIM_OC1_Modes == TIM_TIMING)
- {
- TIMx->CR1 &= TIM_OC1_DISABLE_MASK;
- }
- else
- {
- TIMx->CR1 |= TIM_OC1_ENABLE_MASK;
- }
-
- break;
-
-/************************** Output compare channel 2 **************************/
-
- case TIM_OCM_CHANNEL_2:
-
- if (TIM_InitStruct->TIM_Pulse_Level_2 == TIM_HIGH)
- {
- TIMx->CR1 |= TIM_OLVL2_SET_MASK;
- }
- else
- {
- TIMx->CR1 &= TIM_OLVL2_RESET_MASK;
- }
-
- TIMx->OC2R = TIM_InitStruct->TIM_Pulse_Length_2;
-
- if (TIM_InitStruct->TIM_OC2_Modes == TIM_TIMING)
- {
- TIMx->CR1 &= TIM_OC2_DISABLE_MASK;
- }
- else
- {
- TIMx->CR1 |= TIM_OC2_ENABLE_MASK;
- }
-
- break;
-
-/************************ Output compare channel 1 & 2 ************************/
-
- case TIM_OCM_CHANNEL_12:
-
- TIMx->OC2R = TIM_InitStruct->TIM_Pulse_Length_2;
- TIMx->OC1R = TIM_InitStruct->TIM_Pulse_Length_1;
-
- if (TIM_InitStruct->TIM_OC2_Modes == TIM_TIMING)
- {
- TIMx->CR1 &= TIM_OC2_DISABLE_MASK;
- }
- else
- {
- TIMx->CR1 |= TIM_OC2_ENABLE_MASK;
- }
-
- if (TIM_InitStruct->TIM_OC1_Modes == TIM_TIMING)
- {
- TIMx->CR1 &= TIM_OC1_DISABLE_MASK;
- }
- else
- {
- TIMx->CR1 |= TIM_OC1_ENABLE_MASK;
- }
-
- if (TIM_InitStruct->TIM_Pulse_Level_1 == TIM_HIGH)
- {
- TIMx->CR1 |= TIM_OLVL1_SET_MASK;
- }
- else
- {
- TIMx->CR1 &= TIM_OLVL1_RESET_MASK;
- }
-
- if (TIM_InitStruct->TIM_Pulse_Level_2 == TIM_HIGH)
- {
- TIMx->CR1 |= TIM_OLVL2_SET_MASK;
- }
- else
- {
- TIMx->CR1 &= TIM_OLVL2_RESET_MASK;
- }
-
- break;
-
-/********************************** PWM mode **********************************/
-
- case TIM_PWM:
-
- /* Set the Level During the pulse */
- if ( TIM_InitStruct->TIM_Pulse_Level_1 == TIM_HIGH)
- {
- TIMx->CR1 |= TIM_OLVL2_SET_MASK;
- }
- else
- {
- TIMx->CR1 &= TIM_OLVL2_RESET_MASK;
- }
-
- /* Set the Level after the pulse */
- if (TIM_InitStruct->TIM_Period_Level == TIM_HIGH)
- {
- TIMx->CR1 |= TIM_OLVL1_SET_MASK;
- }
- else
- {
- TIMx->CR1 &= TIM_OLVL1_RESET_MASK;
- }
-
- /* Set the OCAE */
- TIMx->CR1 |= TIM_OC1_ENABLE_MASK;
-
- /* Set the PWM Bit */
- TIMx->CR1 |= TIM_PWM_MASK;
-
- /* Set the Duty Cycle value */
- if ( TIM_InitStruct->TIM_Pulse_Length_1 < 5 )
- {
- TIM_InitStruct->TIM_Pulse_Length_1 = 4;
- }
-
- TIMx->OC1R = TIM_InitStruct->TIM_Pulse_Length_1 - 4;
-
- /* Set the Full Period */
- TIMx->OC2R = TIM_InitStruct->TIM_Full_Period - 4;
-
- break;
-
-/******************************* One pulse mode *******************************/
-
- case TIM_OPM:
-
- /* Set the Level During the pulse */
- if (TIM_InitStruct->TIM_Pulse_Level_1 == TIM_HIGH)
- {
- TIMx->CR1 |= TIM_OLVL2_SET_MASK;
- }
-
- /* Set the Level after the pulse */
- if (TIM_InitStruct->TIM_Period_Level == TIM_HIGH)
- {
- TIMx->CR1 |= TIM_OLVL1_SET_MASK;
- }
-
- /* Set the Activation Edge on the ICAP 1 */
- if (TIM_InitStruct->TIM_OPM_INPUT_Edge == TIM_OPM_EDGE_RISING)
- {
- TIMx->CR1 |= TIM_OPM_EDGE_RISING;
- }
-
- /* Set the Output Compare Function */
- TIMx->CR1 |= TIM_OC1_ENABLE_MASK;
-
- /* Set the One pulse mode */
- TIMx->CR1 |= TIM_OPM_MASK;
-
- /* Set the Pulse length */
- TIMx->OC1R = TIM_InitStruct->TIM_Pulse_Length_1;
-
- break;
-
-/*************************** Input capture channel 1 **************************/
-
- case TIM_ICAP_CHANNEL_1:
-
- if (TIM_InitStruct->TIM_ICAP1_Edge == TIM_ICAP1_EDGE_RISING)
- {
- TIMx->CR1 |= TIM_ICAP1_EDGE_RISING;
- }
- else
- {
- TIMx->CR1 &= TIM_ICAP1_EDGE_FALLING;
- }
-
- break;
-
-/*************************** Input capture channel 2 **************************/
-
- case TIM_ICAP_CHANNEL_2:
-
- if (TIM_InitStruct->TIM_ICAP2_Edge == TIM_ICAP2_EDGE_RISING)
- {
- TIMx->CR1 |= TIM_ICAP2_EDGE_RISING;
- }
- else
- {
- TIMx->CR1 &= TIM_ICAP2_EDGE_FALLING;
- }
-
- break;
-
-/************************* Input capture channel 1 & 2 ************************/
-
- case TIM_ICAP_CHANNEL_12:
- if (TIM_InitStruct->TIM_ICAP2_Edge == TIM_ICAP2_EDGE_RISING)
- {
- TIMx->CR1 |= TIM_ICAP2_EDGE_RISING;
- }
- else
- {
- TIMx->CR1 &= TIM_ICAP2_EDGE_FALLING;
- }
-
- if (TIM_InitStruct->TIM_ICAP1_Edge == TIM_ICAP1_EDGE_RISING)
- {
- TIMx->CR1 |= TIM_ICAP1_EDGE_RISING;
- }
- else
- {
- TIMx->CR1 &= TIM_ICAP1_EDGE_FALLING;
- }
-
- break;
-
- default:
- break;
- }
-}
-
-/*******************************************************************************
-* Function Name : TIM_CounterCmd
-* Description : Enables or disables TIMx Counter peripheral.
-* Input1 : TIMx: where x can be from 0 to 3 to select the TIM
-* peripheral.
-* Input2 : TIM_operation: specifies the new state of the TIMx Counter.
-* This parameter can be one of the following values:
-* - TIM_START: Start the timer counter.
-* - TIM_STOP : Stop the timer counter.
-* - TIM_CLEAR: Clear the timer counter.
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM_CounterCmd(TIM_TypeDef *TIMx, TIM_CounterOperations TIM_operation)
-{
- switch (TIM_operation)
- {
- case TIM_START:
- TIMx->CR1 |= TIM_ENABLE_MASK;
- break;
-
- case TIM_STOP:
- TIMx->CR1 &= TIM_DISABLE_MASK;
- break;
-
- case TIM_CLEAR:
- TIMx->CNTR = 0x1234;
- break;
-
- default:
- break;
- }
-}
-
-/*******************************************************************************
-* Function Name : TIM_PrescalerConfig
-* Description : This routine is used to configure the TIMx prescaler value
-* (when using the APB clock).
-* Input1 : TIMx: where x can be from 0 to 3 to select the TIM
-* peripheral.
-* Input2 : TIM_Prescaler: specifies the prescaler value. This parameter
-* can be a value from 0x0 to 0xFF.
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM_PrescalerConfig(TIM_TypeDef *TIMx, u8 TIM_Prescaler)
-{
- TIMx->CR2 &= 0xFF00;
- TIMx->CR2 |= TIM_Prescaler;
-
-}
-/*******************************************************************************
-* Function Name : TIM_GetPrescalerValue
-* Description : This routine is used to get the TIMx prescaler value
-* (when using the APB clock).
-* Input : TIMx: where x can be from 0 to 3 to select the TIM
-* peripheral.
-* Output : None
-* Return : The prescaler value.
-*******************************************************************************/
-u8 TIM_GetPrescalerValue(TIM_TypeDef *TIMx)
-{
- return TIMx->CR2 & 0x00FF;
-}
-
-/*******************************************************************************
-* Function Name : TIM_GetCounterValue
-* Description : This routine is used to get the TIMx counter value.
-* Input : TIMx: where x can be from 0 to 3 to select the TIM
-* peripheral.
-* Output : None
-* Return : The counter value.
-*******************************************************************************/
-u16 TIM_GetCounterValue(TIM_TypeDef *TIMx)
-{
- return TIMx->CNTR;
-}
-
-/*******************************************************************************
-* Function Name : TIM_GetICAP1Value
-* Description : This routine is used to get the Input Capture 1 value.
-* Input : TIMx: where x can be from 0 to 3 to select the TIM
-* peripheral.
-* Output : None
-* Return : The Input Capture 1 value.
-*******************************************************************************/
-u16 TIM_GetICAP1Value(TIM_TypeDef *TIMx)
-{
- return TIMx->IC1R;
-}
-
-/*******************************************************************************
-* Function Name : TIM_GetICAP2Value
-* Description : This routine is used to get the Input Capture 2 value.
-* Input : TIMx: where x can be from 0 to 3 to select the TIM
-* peripheral.
-* Output : None
-* Return : The Input Capture 2 value.
-*******************************************************************************/
-u16 TIM_GetICAP2Value(TIM_TypeDef *TIMx)
-{
- return TIMx->IC2R;
-}
-
-/*******************************************************************************
-* Function Name : TIM_SetPulse
-* Description : This routine is used to set the pulse value.
-* Input1 : TIMx: where x can be from 0 to 3 to select the TIM
-* peripheral.
-* Input2 : TIM_Channel: specifies the needed channel.
-* This parameter can be one of the following values:
-* - TIM_PWM_OC1_Channel: PWM/Output Compare 1 Channel
-* - TIM_OC2_Channel : Output Compare 2 Channel
-* Input3 : TIM_Pulse: specifies the new pulse value.
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM_SetPulse(TIM_TypeDef *TIMx,u16 TIM_Channel ,u16 TIM_Pulse)
-{
- if (TIM_Channel == TIM_PWM_OC1_Channel)
- {
- TIMx->OC1R = TIM_Pulse;
- }
- else
- {
- TIMx->OC2R = TIM_Pulse;
- }
-}
-/*******************************************************************************
-* Function Name : TIM_GetFlagStatus
-* Description : Checks whether the specified TIMx flag is set or not.
-* Input1 : TIMx: where x can be from 0 to 3 to select the TIM
-* peripheral.
-* Input2 : TIM_Flag: specifies the flag to check.
-* This parameter can be one of the following values:
-* - TIM_FLAG_IC1: Input Capture Channel 1 Flag
-* - TIM_FLAG_IC2: Input Capture Channel 2 Flag
-* - TIM_FLAG_TO : Timer Overflow Flag
-* - TIM_FLAG_OC1: Output Compare Channel 1 Flag
-* - TIM_FLAG_OC2: Output Compare Channel 2 Flag
-* Output : None
-* Return : The NewState of the TIM_Flag (SET or RESET).
-*******************************************************************************/
-FlagStatus TIM_GetFlagStatus(TIM_TypeDef *TIMx, u16 TIM_Flag)
-{
- if((TIMx->SR & TIM_Flag) == RESET)
- {
- return RESET;
- }
- else
- {
- return SET;
- }
-}
-
-/*******************************************************************************
-* Function Name : TIM_ClearFlag
-* Description : Clears the TIM Flag passed as a parameter.
-* Input1 : TIMx: where x can be from 0 to 3 to select the TIM
-* peripheral.
-* Input2 : TIM_Flag: specifies the flag to clear.
-* This parameter can be one of the following values:
-* - TIM_FLAG_IC1: Input Capture Channel 1 Flag
-* - TIM_FLAG_IC2: Input Capture Channel 2 Flag
-* - TIM_FLAG_TO : Timer Overflow Flag
-* - TIM_FLAG_OC1: Output Compare Channel 1 Flag
-* - TIM_FLAG_OC2: Output Compare Channel 2 Flag
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM_ClearFlag(TIM_TypeDef *TIMx, u16 TIM_Flag)
-{
- /* Clear TIM_Flag */
- TIMx->SR &= ~TIM_Flag;
-}
-
-/*******************************************************************************
-* Function Name : TIM_GetPWMIPulse
-* Description : This routine is used to get the Pulse value in PWMI Mode.
-* Input : TIMx: where x can be from 0 to 3 to select the TIM
-* peripheral.
-* Output : None
-* Return : The pulse value.
-*******************************************************************************/
-u16 TIM_GetPWMIPulse(TIM_TypeDef *TIMx)
-{
- return TIMx->IC2R;
-}
-
-/*******************************************************************************
-* Function Name : TIM_GetPWMIPeriod
-* Description : This routine is used to get the Period value in PWMI Mode.
-* Input : TIMx: where x can be from 0 to 3 to select the TIM
-* peripheral.
-* Output : None
-* Return : The period value.
-*******************************************************************************/
-u16 TIM_GetPWMIPeriod(TIM_TypeDef *TIMx)
-{
- return TIMx->IC1R;
-}
-
-/*******************************************************************************
-* Function Name : TIM_ITConfig
-* Description : Configures the Timer interrupt source.
-* Input1 : TIMx: where x can be from 0 to 3 to select the TIM
-* peripheral.
-* Input2 : TIM_IT: specifies the TIM interrupt source to be enabled.
-* This parameter can be one of the following values:
-* - TIM_IT_IC1: Input Capture 1 Interrupt source.
-* - TIM_IT_OC1: Output Compare 1 Interrupt source.
-* - TIM_IT_TO : Timer Overflow Interrupt source.
-* - TIM_IT_IC2: Input Capture 2 Interrupt source.
-* - TIM_IT_OC2: Output Compare 2 Interrupt source.
-* Input3 : TIM_Newstate: specifies the new state of the TIMx IT.
-* This parameter can be one of the following values:
-* - ENABLE : Enable the needed interrupt.
-* - DISABLE: Disable the needed interrupt.
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM_ITConfig(TIM_TypeDef *TIMx, u16 TIM_IT, FunctionalState TIM_Newstate)
-{
- if(TIM_Newstate == ENABLE)
- {
- TIMx->CR2 = (TIMx->CR2 & 0x00FF) | TIM_IT;
- }
- else
- {
- TIMx->CR2 &= ~TIM_IT;
- }
-}
-
-/*******************************************************************************
-* Function Name : TIM_DMAConfig
-* Description : Configures the Timer DMA source.
-* Input1 : TIMx: where x can be from 0 to 3 to select the TIM
-* peripheral.
-* Input2 : TIM_DMA_Souces: specifies the TIM DMA source to be selected.
-* This parameter can be one of the following values:
-* - TIM_DMA_IC1: Input Capture 1 DMA source.
-* - TIM_DMA_OCA1 Output Compare 1 DMA source.
-* - TIM_DMA_TO: Timer Overflow DMA source.
-* - TIM_DMA_IC2: Input Capture 2 DMA source.
-* - TIM_DMA_OC2: Output Compare 2 DMA source.
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM_DMAConfig(TIM_TypeDef *TIMx, u16 TIM_DMA_Sources)
-{
- /* Reset the DMAS[1:0] bits */
- TIMx->CR1 &= TIM_DMA_CLEAR_MASK;
- /* Set the DMAS[1:0] bits according to TIM_DMA_Sources parameter */
- TIMx->CR1 |= TIM_DMA_Sources;
-}
-
-/*******************************************************************************
-* Function Name : TIM_DMACmd
-* Description : Enables or disables TIMx DMA peripheral.
-* Input1 : TIMx: where x can be from 0 to 3 to select the TIM
-* peripheral.
-* Input2 : TIM_Newstate: new state of the TIMx DMA peripheral
-* This parameter can be one of the following values:
-* - ENABLE : Enable the TIMx DMA.
-* - DISABLE: Disable the TIMx DMA.
-* Output : None
-* Return : None
-*******************************************************************************/
-void TIM_DMACmd(TIM_TypeDef *TIMx, FunctionalState TIM_Newstate)
-{
- if (TIM_Newstate == ENABLE)
- {
- TIMx->CR2 |= TIM_DMA_ENABLE;
- }
- else
- {
- TIMx->CR2 &= TIM_DMA_DISABLE;
- }
-}
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/src/91x_uart.c b/uc_str912/prj_template91x/str91x_lib/src/91x_uart.c deleted file mode 100644 index 3c87216..0000000 --- a/uc_str912/prj_template91x/str91x_lib/src/91x_uart.c +++ /dev/null @@ -1,658 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_uart.c
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file provides all the UART software functions.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_uart.h"
-#include "91x_scu.h"
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* UART IrDA Mask */
-#define UART_IrDA_Disable_Mask 0xFFFD /* IrDA Disable Mask */
-#define UART_IrDA_Enable_Mask 0x0002 /* IrDA Enable Mask */
-#define IrDA_LowPower_Enable_Mask 0x0004 /*IrDA lower power mode enable*/
-#define IrDA_LowPower_Disable_Mask 0xFFFB /*IrDA lower power mode enable*/
-
-/* UART Mask */
-#define UART_Enable_Mask 0x0001 /* UART Enable Mask */
-#define UART_Disable_Mask 0xFFFE /* UART Disable Mask */
-
-/* UART LoopBack */
-#define UART_LoopBack_Disable_Mask 0xFF7F /* LoopBack Disable Mask */
-#define UART_LoopBack_Enable_Mask 0x0080 /* LoopBack Enable Mask */
-
-#define UART_WordLength_Mask 0xFF9F /* UART Word Length Mask */
-#define UART_Parity_Mask 0xFF79 /* UART Parity Mask */
-#define UART_HardwareFlowControl_Mask 0x3FFF /* UART Hardware Flow Control Mask */
-#define UART_TxRxFIFOLevel_Mask 0xFFC0 /* UART Tx Rx FIFO Level Mask */
-#define UART_BreakChar_Mask 0x0001 /* UART Break Character send Mask*/
-#define UART_FLAG_Mask 0x1F /* UART Flag Mask */
-#define UART_Mode_Mask 0xFCFF /* UART Mode Mask */
-#define UART_RTS_LowLevel_Mask 0x0800 /* RTS signal is low */
-#define UART_RTS_HighLevel_Mask 0xF7FF /* RTS signal is High */
-#define UART_DTR_LowLevel_Mask 0x0400 /* DTR signal is low */
-#define UART_DTR_HighLevel_Mask 0xFBFF /* DTR signal is High */
-#define UART_ClearFlag_Mask 0xAA /* Clear Flag Mask */
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
- /*******************************************************************************
-* Function Name : UART_DeInit
-* Description : Deinitializes the UARTx peripheral registers
-* to their default reset values.
-* Input : UARTx: where x can be 0,1 or 2 to select the UART peripheral.
-* Output : None
-* Return : None
-*******************************************************************************/
-void UART_DeInit(UART_TypeDef* UARTx)
-{
- /* Reset the UARTx registers values */
- if(UARTx == UART0)
- {
- SCU_APBPeriphReset(__UART0,ENABLE);
- SCU_APBPeriphReset(__UART0,DISABLE);
- }
- else if(UARTx == UART1)
- {
- SCU_APBPeriphReset(__UART1,ENABLE);
- SCU_APBPeriphReset(__UART1,DISABLE);
- }
- else if(UARTx == UART2)
- {
- SCU_APBPeriphReset(__UART2,ENABLE);
- SCU_APBPeriphReset(__UART2,DISABLE);
- }
-}
-
-/*******************************************************************************
-* Function Name : UART_Init
-* Description : Initializes the UARTx peripheral according to the specified
-* parameters in the UART_InitStruct .
-* Input : - UARTx: where x can be 0,1or 2 to select the UART peripheral.
-* - UART_InitStruct: pointer to a UART_InitTypeDef structure
-* that contains the configuration information for the
-* specified UART peripheral.
-* Output : None
-* Return : None
-*******************************************************************************/
-void UART_Init(UART_TypeDef* UARTx, UART_InitTypeDef* UART_InitStruct)
-{
-
- u64 UART_MainClock = 0;
- u32 IntegerDivider = 0;
- u32 FractionalDivider = 0;
-
- /* Clear the LCR[6:5] bits */
- UARTx->LCR &= UART_WordLength_Mask;
- /* Set the LCR[6:5] bits according to UART_WordLength value */
- UARTx->LCR |= UART_InitStruct->UART_WordLength;
-
- /* Choose Stop Bits */
- if(UART_InitStruct->UART_StopBits == UART_StopBits_2)
- {
- /* 2 Stop Bit */
- UARTx->LCR |= UART_StopBits_2;
- }
- else
- {
- /* One Stop Bits */
- UARTx->LCR &= UART_StopBits_1;
- }
-
- /* Configure the Parity */
- /* Clear the LCR[7]and LCR[2:1] bits */
- UARTx->LCR &= UART_Parity_Mask;
- /* Set the LCR[7]and LCR[2:1] bits according to UART_Parity value */
- UARTx->LCR |= UART_InitStruct->UART_Parity;
-
- /* Configure the BaudRate */
- UART_MainClock = (SCU_GetMCLKFreqValue())*1000;
- if((SCU->CLKCNTR & 0x200) != 0x200)
- {
- UART_MainClock = UART_MainClock/2;
- }
- /* Determine the integer part */
- IntegerDivider = ((100) * (UART_MainClock) / (16 * (UART_InitStruct->UART_BaudRate)));
- UARTx->IBRD = IntegerDivider / 100;
-
- /* Determine the fractional part */
- FractionalDivider = IntegerDivider - (100 * (UARTx->IBRD));
- UARTx->FBRD = ((((FractionalDivider * 64) + 50) / 100));
-
- /* Choose the Hardware Flow Control */
- /* Clear the CR[15:14] bits */
- UARTx->CR &= UART_HardwareFlowControl_Mask;
- /* Set the CR[15:14] bits according to UART_HardwareFlowControl value */
- UARTx->CR |= UART_InitStruct->UART_HardwareFlowControl;
-
- /* Configure the UART mode */
- /* Clear the CR[9:8] bits */
- UARTx->CR &= UART_Mode_Mask;
- /* Set the CR[9:8] bits according to UART_Mode value */
- UARTx->CR |= UART_InitStruct->UART_Mode;
-
- /* Enable or disable the FIFOs */
- /* Set the FIFOs Levels */
- if(UART_InitStruct->UART_FIFO == UART_FIFO_Enable)
- {
- /* Enable the FIFOs */
- UARTx->LCR |= UART_FIFO_Enable;
-
- /* Clear TXIFLSEL and RXIFLSEL bits */
- UARTx->IFLS &= UART_TxRxFIFOLevel_Mask;
-
- /* Set RXIFLSEL bits according to UART_RxFIFOLevel value */
- UARTx->IFLS |= (UART_InitStruct->UART_RxFIFOLevel << 3);
-
- /* Set TXIFLSEL bits according to UART_TxFIFOLevel value */
- UARTx->IFLS |= UART_InitStruct->UART_TxFIFOLevel;
- }
- else
- {
- /* Disable the FIFOs */
- UARTx->LCR &= UART_FIFO_Disable;
- }
-}
-
-/*******************************************************************************
-* Function Name : UART_StructInit
-* Description : Fills each UART_InitStruct member with its reset value.
-* Input : UART_InitStruct: pointer to a UART_InitTypeDef structure which
-* will be initialized.
-* Output : None
-* Return : None
-*******************************************************************************/
-void UART_StructInit(UART_InitTypeDef* UART_InitStruct)
-{
- /* Reset the UART_InitStruct members */
- UART_InitStruct->UART_WordLength = UART_WordLength_8D;
- UART_InitStruct->UART_StopBits = UART_StopBits_1;
- UART_InitStruct->UART_Parity = UART_Parity_Odd ;
- UART_InitStruct->UART_BaudRate = 9600;
- UART_InitStruct->UART_HardwareFlowControl = UART_HardwareFlowControl_None;
- UART_InitStruct->UART_Mode = UART_Mode_Tx_Rx;
- UART_InitStruct->UART_FIFO = UART_FIFO_Enable;
- UART_InitStruct->UART_TxFIFOLevel = UART_FIFOLevel_1_2;
- UART_InitStruct->UART_RxFIFOLevel = UART_FIFOLevel_1_2;
-}
-
-/*******************************************************************************
-* Function Name : UART_Cmd
-* Description : Enables or disables the specified UART peripheral.
-* Input : - UARTx: where x can be 0,1 or 2 to select the UART peripheral
-* - NewState: new state of the UARTx peripheral.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None
-* Return : None
-*******************************************************************************/
-void UART_Cmd(UART_TypeDef* UARTx, FunctionalState NewState)
-{
- if (NewState == ENABLE)
- {
- /* Enable the selected UART by setting the UARTEN bit in the CR register */
- UARTx->CR |= UART_Enable_Mask;
- }
- else
- {
- /* Disable the selected UART by clearing the UARTEN bit in the CR register */
- UARTx->CR &= UART_Disable_Mask;
- }
-}
-
-/*******************************************************************************
-* Function Name : UART_ITConfig
-* Description : Enables or disables the specified UART interrupts.
-* Input : - UARTx: where x can be 0,1 or 2 to select the UART peripheral
-* - UART_IT: specifies the UART interrupts sources to be
-* enabled or disabled. This parameter can be any combination
-* of the following values:
-* - UART_IT_OverrunError: Overrun Error interrupt
-* - UART_IT_BreakError: Break Error interrupt
-* - UART_IT_ParityError: Parity Error interrupt
-* - UART_IT_FrameError: Frame Error interrupt
-* - UART_IT_ReceiveTimeOut: Receive Time Out interrupt
-* - UART_IT_Transmit: Transmit interrupt
-* - UART_IT_Receive: Receive interrupt
-* - UART_IT_DSR: DSR interrupt
-* - UART_IT_DCD: DCD interrupt
-* - UART_IT_CTS: CTS interrupt
-* - UART_IT_RI: RI interrupt
-* - NewState: new state of the UARTx peripheral.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None
-* Return : None
-*******************************************************************************/
-void UART_ITConfig(UART_TypeDef* UARTx, u16 UART_IT, FunctionalState NewState)
-{
- if(NewState == ENABLE)
- {
- /* Enables the selected interrupts */
- UARTx->IMSC |= UART_IT;
- }
- else
- {
- /* Disables the selected interrupts */
- UARTx->IMSC &= ~UART_IT;
- }
-}
-
-/*******************************************************************************
-* Function Name : UART_DMAConfig
-* Description : Configures the UARTx’s DMA interface.
-* Input : - UARTx: where x can be 1 or 2 to select the UART peripheral
-* - UART_DMAOnError: specifies the DMA on error request.
-* This parameter can be:
-* - UART_DMAOnError_Enable: DMA receive request enabled
-* when the UART error interrupt is asserted.
-* - UART_DMAOnError_Disable: DMA receive request disabled
-* when the UART error interrupt is asserted.
-* Output : None
-* Return : None
-*******************************************************************************/
-void UART_DMAConfig(UART_TypeDef* UARTx, u16 UART_DMAOnError)
-{
- if(UART_DMAOnError == UART_DMAOnError_Enable)
- {
- UARTx->DMACR &= UART_DMAOnError_Enable;
- }
- else
- {
- UARTx->DMACR |= UART_DMAOnError_Disable;
- }
-}
-
-/*******************************************************************************
-* Function Name : UART_DMACmd
-* Description : Enables or disables the UARTx’s DMA interface.
-* Input : - UARTx: where x can be 1 or 2 to select the UART peripheral
-* - UART_DMAReq: enables or disables the request of DMA from UART.
-* This parameter can be:
-* - UART_DMAReq_Tx: Transmit DMA Enable
-* - UART_DMAReq_Rx: Receive DMA Enable
-* - NewState: new state of the UARTx peripheral.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None
-* Return : None
-*******************************************************************************/
-void UART_DMACmd(UART_TypeDef* UARTx, u8 UART_DMAReq, FunctionalState NewState)
-{
- if(UART_DMAReq == UART_DMAReq_Tx)
- {
- if(NewState == ENABLE)
- {
- UARTx->DMACR |= UART_DMAReq_Tx;
- }
- else
- {
- UARTx->DMACR &= ~UART_DMAReq_Tx;
- }
- }
-
- if(UART_DMAReq == UART_DMAReq_Rx)
- {
- if(NewState == ENABLE)
- {
- UARTx->DMACR |= UART_DMAReq_Rx;
- }
- else
- {
- UARTx->DMACR &= ~UART_DMAReq_Rx;
- }
- }
-}
-
-/*******************************************************************************
-* Function Name : UART_LoopBackConfig
-* Description : Enables or disables the LoopBack mode.
-* Input : - UARTx: where x can be 0,1 or 2 to select the UART peripheral
-* - NewState: new state of the UARTx peripheral.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None
-* Return : None
-*******************************************************************************/
-void UART_LoopBackConfig(UART_TypeDef* UARTx, FunctionalState NewState)
-{
- if (NewState == ENABLE)
- {
- /* Enable the LoopBack mode of the specified UART */
- UARTx->CR |= UART_LoopBack_Enable_Mask;
- }
- else
- {
- /* Disable the LoopBack mode of the specified UART */
- UARTx->CR &= UART_LoopBack_Disable_Mask;
- }
-}
-
-/*******************************************************************************
-* Function Name : UART_GetFlagStatus
-* Description : Checks whether the specified UART flag is set or not.
-* Input : - UARTx: where x can be 0,1 or 2 to select the UART peripheral
-* - UART_FLAG: specifies the flag to check.
-* This parameter can be one of the following values:
-* - UART_FLAG_OverrunError: Overrun error flag
-* - UART_FLAG_Break: break error flag
-* - UART_FLAG_ParityError: parity error flag
-* - UART_FLAG_FrameError: frame error flag
-* - UART_FLAG_RI: RI flag
-* - UART_FLAG_TxFIFOEmpty: Transmit FIFO Empty flag
-* - UART_FLAG_RxFIFOFull: Receive FIFO Full flag
-* - UART_FLAG_TxFIFOFull: Transmit FIFO Full flag
-* - UART_FLAG_RxFIFOEmpty: Receive FIFO Empty flag
-* - UART_FLAG_Busy: UART Busy flag
-* - UART_FLAG_CTS: CTS flag
-* - UART_FLAG_DCD: DCD flag
-* - UART_FLAG_DSR: DSR flag
-* - UART_RawIT_OverrunError: Overrun Error interrupt flag
-* - UART_RawIT_BreakError: Break Error interrupt flag
-* - UART_RawIT_ParityError: Parity Error interrupt flag
-* - UART_RawIT_FrameError: Frame Error interrupt flag
-* - UART_RawIT_ReceiveTimeOut: ReceiveTimeOut interrupt flag
-* - UART_RawIT_Transmit: Transmit interrupt flag
-* - UART_RawIT_Receive: Receive interrupt flag
-* - UART_RawIT_DSR: DSR interrupt flag
-* - UART_RawIT_DCD: DCD interrupt flag
-* - UART_RawIT_CTS: CTS interrupt flag
-* - UART_RawIT_RI: RI interrupt flag
-* Output : None
-* Return : The new state of UART_FLAG (SET or RESET).
-*******************************************************************************/
-FlagStatus UART_GetFlagStatus(UART_TypeDef* UARTx, u16 UART_FLAG)
-{
-
- u32 UARTReg = 0, FlagPos = 0;
- u32 StatusReg = 0;
-
- /* Get the UART register index */
- UARTReg = UART_FLAG >> 5;
-
- /* Get the flag position */
- FlagPos = UART_FLAG & UART_FLAG_Mask;
-
- if(UARTReg == 1) /* The flag to check is in RSR register */
- {
- StatusReg = UARTx->RSECR;
- }
- else if (UARTReg == 2) /* The flag to check is in FR register */
- {
- StatusReg = UARTx->FR;
- }
- else if(UARTReg == 3) /* The flag to check is in RIS register */
- {
- StatusReg = UARTx->RIS;
- }
-
- if((StatusReg & (1 << FlagPos))!= RESET)
- {
- return SET;
- }
- else
- {
- return RESET;
- }
-}
-
-/*******************************************************************************
-* Function Name : UART_ClearFlag
-* Description : Clears the UARTx’s flags(Frame, Parity, Break, Overrun error).
-* Input : - UARTx: where x can be 0,1or 2 to select the UART peripheral.
-* Output : None
-* Return : None
-*******************************************************************************/
-void UART_ClearFlag(UART_TypeDef* UARTx)
-{
- /* Clear the flag */
- UARTx->RSECR = UART_ClearFlag_Mask;
-}
-
-/*******************************************************************************
-* Function Name : UART_GetITStatus
-* Description : Checks whether the specified UART interrupt has occured or not.
-* Input : - UARTx: where x can be 0,1or 2 to select the UART peripheral.
-* - UART_IT: specifies the interrupt pending bit to be checked.
-* This parameter can be one of the following values:
-* - UART_IT_OverrunError: Overrun Error interrupt
-* - UART_IT_BreakError: Break Error interrupt
-* - UART_IT_ParityError: Parity Error interrupt
-* - UART_IT_FrameError: Frame Error interrupt
-* - UART_IT_ReceiveTimeOut: Receive Time Out interrupt
-* - UART_IT_Transmit: Transmit interrupt
-* - UART_IT_Receive: Receive interrupt
-* - UART_IT_DSR: DSR interrupt
-* - UART_IT_DCD: DCD interrupt
-* - UART_IT_CTS: CTS interrupt
-* - UART_IT_RI: RI interrupt
-* Output : None
-* Return : The new state of UART_IT (SET or RESET).
-*******************************************************************************/
-ITStatus UART_GetITStatus(UART_TypeDef* UARTx, u16 UART_IT)
-{
- if((UARTx->MIS & UART_IT) != RESET)
- {
- return SET;
- }
- else
- {
- return RESET;
- }
-}
-
-/*******************************************************************************
-* Function Name : UART_ClearITPendingBit
-* Description : Clears the UARTx’s interrupt pending bits.
-* Input : - UARTx: where x can be 0,1or 2 to select the UART peripheral.
-* - UART_IT: specifies the interrupt pending bit to clear.
-* More than one interrupt can be cleared using the “|” operator.
-* This parameter can be:
-* - UART_IT_OverrunError: Overrun Error interrupt
-* - UART_IT_BreakError: Break Error interrupt
-* - UART_IT_ParityError: Parity Error interrupt
-* - UART_IT_FrameError: Frame Error interrupt
-* - UART_IT_ReceiveTimeOut: Receive Time Out interrupt
-* - UART_IT_Transmit: Transmit interrupt
-* - UART_IT_Receive: Receive interrupt
-* - UART_IT_DSR: DSR interrupt
-* - UART_IT_DCD: DCD interrupt
-* - UART_IT_CTS: CTS interrupt
-* - UART_IT_RI: RI interrupt
-* Output : None
-* Return : None
-*******************************************************************************/
-void UART_ClearITPendingBit(UART_TypeDef* UARTx, u16 UART_IT)
-{
- /* Clear the specified interrupt */
- UARTx->ICR = UART_IT;
-}
-
-/*******************************************************************************
-* Function Name : UART_IrDALowPowerConfig
-* Description : Sets the IrDA low power mode
-* Input : - IrDAx: where x can be 0,1 or 2 to select the UART/IrDA peripheral.
-* - NewState: new state of the UARTIrDA peripheral.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None
-* Return : None
-*******************************************************************************/
-void UART_IrDALowPowerConfig(u8 IrDAx, FunctionalState NewState)
-{
- UART_TypeDef* UARTx;
-
- switch(IrDAx)
- {
- case IrDA0: UARTx = UART0;
- break;
- case IrDA1: UARTx = UART1;
- break;
- case IrDA2: UARTx = UART2;
- break;
- }
-
- if (NewState == ENABLE)
- {
- UARTx->CR |= IrDA_LowPower_Enable_Mask;
- }
- else
- {
- UARTx->CR &= IrDA_LowPower_Disable_Mask;
- }
-}
-
-/*******************************************************************************
-* Function Name : UART_IrDASetCounter
-* Description : Sets the IrDA counter divisor value.
-* Input : - UARTx: where x can be 0,1 or 2 to select the UART/IrDA peripheral.
-* - IrDA_Counter: IrDA counter divisor new value n low power mode(Hz).
-* Output : None
-* Return : None
-*******************************************************************************/
-void UART_IrDASetCounter(u8 IrDAx, u32 IrDA_Counter)
-{
- UART_TypeDef* UARTx;
- u32 APBClock;
- switch(IrDAx)
- {
- case IrDA0: UARTx = UART0;
- break;
- case IrDA1: UARTx = UART1;
- break;
- case IrDA2: UARTx = UART2;
- break;
- }
- /* Get the APB frequency */
- APBClock = (SCU_GetPCLKFreqValue())*1000;
- /* Determine the Counter Divisor part */
- UARTx->ILPR = (((APBClock*10) / ( IrDA_Counter)) + 5 )/10;
- }
-
-/*******************************************************************************
-* Function Name : UART_IrDACmd
-* Description : Enables or disables the UARTx’s IrDA interface.
-* Input : - IrDAx: where x can be 0,1 or 2 to select the UART/IrDA peripheral
-* - NewState: new state of the UARTx peripheral.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None
-* Return : None
-*******************************************************************************/
-void UART_IrDACmd(u8 IrDAx, FunctionalState NewState)
-{
- UART_TypeDef* UARTx;
-
- switch(IrDAx)
- {
- case IrDA0: UARTx = UART0;
- break;
- case IrDA1: UARTx = UART1;
- break;
- case IrDA2: UARTx = UART2;
- break;
- }
- if(NewState == ENABLE)
- {
- /* Enable the IrDA mode of the specified UART */
- UARTx->CR |= UART_IrDA_Enable_Mask;
- }
- else
- {
- /* Disable the IrDA mode of the specified UART */
- UARTx->CR &= UART_IrDA_Disable_Mask;
- }
-}
-
-/*******************************************************************************
-* Function Name : UART_SendData
-* Description : Transmits signle Byte of data through the UARTx peripheral.
-* Input : - UARTx: where x can be 0,1 or 2 to select the UART peripheral.
-* - Data: the byte to transmit
-* Output : None
-* Return : None
-*******************************************************************************/
-void UART_SendData(UART_TypeDef* UARTx, u8 Data)
-{
- /* Transmit one byte */
- UARTx->DR = Data;
-}
-
-/*******************************************************************************
-* Function Name : UART_ReceiveData
-* Description : Returns the most recent received Byte by the UARTx peripheral.
-* Input : UARTx: where x can be 0,1 or 2 to select the UART peripheral.
-* Output : None
-* Return : The received data
-*******************************************************************************/
-u8 UART_ReceiveData(UART_TypeDef* UARTx)
-{
- /* Receive one byte */
- return ((u8)UARTx->DR);
-}
-
-/*******************************************************************************
-* Function Name : UART_SendBreak
-* Description : Transmits break characters.
-* Input : UARTx: where x can be 0,1 or 2 to select the UART peripheral.
-* Output : None
-* Return : None
-*******************************************************************************/
-void UART_SendBreak(UART_TypeDef* UARTx)
-{
- /* Send break characters */
- UARTx->LCR |= UART_BreakChar_Mask;
-}
-
-/*******************************************************************************
-* Function Name : UART_RTSConfig
-* Description : Sets or Resets the RTS signal
-* Input : - LevelState: new state of the RTS signal for UART0 only.
-* This parameter can be: LowLevel or HighLevel
-* Output : None
-* Return : None
-*******************************************************************************/
-void UART_RTSConfig(UART_LevelTypeDef LevelState)
-{
- if(LevelState == LowLevel)
- {
- UART0->CR |= UART_RTS_LowLevel_Mask;
- }
- else
- {
- UART0->CR &= UART_RTS_HighLevel_Mask;
- }
-}
-
-/*******************************************************************************
-* Function Name : UART_DTRConfig
-* Description : Sets or Resets the DTR signal for UART0 only
-* Input : - LevelState: new state of the DTR signal.
-* This parameter can be: LowLevel or HighLevel
-* Output : None
-* Return : None
-*******************************************************************************/
-void UART_DTRConfig(UART_LevelTypeDef LevelState)
-{
- if(LevelState == LowLevel)
- {
- UART0->CR |= UART_DTR_LowLevel_Mask;
- }
- else
- {
- UART0->CR &= UART_DTR_HighLevel_Mask;
- }
-}
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/src/91x_vic.c b/uc_str912/prj_template91x/str91x_lib/src/91x_vic.c deleted file mode 100644 index fecb890..0000000 --- a/uc_str912/prj_template91x/str91x_lib/src/91x_vic.c +++ /dev/null @@ -1,830 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_vic.c
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file provides all the VIC software functions.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS
-* A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-
-/* Standard include ----------------------------------------------------------*/
-#include "91x_vic.h"
-
-/* Include of other module interface headers ---------------------------------*/
-/* Local includes ------------------------------------------------------------*/
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-
-#define VIC_REGISTER_NUMBER 16
-#define VIC_PROTECTION_ENABLE_MASK 0x1
-#define VIC_PROTECTION_DISABLE_MASK 0xFFFFFFFE
-#define VIC_VECTOR_ENABLE_MASK 0x20
-#define VIC_IT_SOURCE_MASK 0xFFFFFFE0
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-
-static void VIC_ITModeConfig(u16 VIC_Source, VIC_ITLineMode VIC_LineMode);
-static void VIC_ISRVectAddConfig(u16 VIC_Source, u16 VIC_Priority, \
- void (*VIC_VectAddress)(void));
-static void VIC_VectEnableConfig(u16 VIC_Source, u16 VIC_Priority);
-static void VIC_ITSourceConfig(u16 VIC_Source, u16 VIC_Priority);
-
-/* Interface functions -------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/*******************************************************************************
-* Function Name : VIC_DeInit
-* Description : Deinitialize the VIC module registers to their default reset
-* values.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void VIC_DeInit(void)
-{
- SCU_AHBPeriphReset(__VIC, ENABLE); /* VIC peripheral is under Reset */
- SCU_AHBPeriphReset(__VIC, DISABLE); /* VIC peripheral Reset off */
-}
-
-/*******************************************************************************
-* Function Name : VIC_GetIRQStatus
-* Description : Get the status of interrupts after IRQ masking.
-* Input : VIC_Source: specifies the number of the source line.
-* This parameter can be one of the following values:
-* - WDG_ITLine : VIC source 0
-* - SW_ITLine : VIC source 1
-* - ARMRX_ITLine : VIC source 2
-* - ARMTX_ITLine : VIC source 3
-* - TIM0_ITLine : VIC source 4
-* - TIM1_ITLine : VIC source 5
-* - TIM2_ITLine : VIC source 6
-* - TIM3_ITLine : VIC source 7
-* - USBHP_ITLine : VIC source 8
-* - USBLP_ITLine : VIC source 9
-* - SCU_ITLine : VIC source 10
-* - ENET_ITLine : VIC source 11
-* - DMA_ITLine : VIC source 12
-* - CAN_ITLine : VIC source 13
-* - MC_ITLine : VIC source 14
-* - ADC_ITLine : VIC source 15
-* - UART0_ITLine : VIC source 16
-* - UART1_ITLine : VIC source 17
-* - UART2_ITLine : VIC source 18
-* - I2C0_ITLine : VIC source 19
-* - I2C1_ITLine : VIC source 20
-* - SSP0_ITLine : VIC source 21
-* - SSP1_ITLine : VIC source 22
-* - LVD_ITLine : VIC source 23
-* - RTC_ITLine : VIC source 24
-* - WIU_ITLine : VIC source 25
-* - EXTIT0_ITLine: VIC source 26
-* - EXTIT1_ITLine: VIC source 27
-* - EXTIT2_ITLine: VIC source 28
-* - EXTIT3_ITLine: VIC source 29
-* - USBWU_ITLine : VIC source 30
-* - PFQBC_ITLine : VIC source 31
-* Output : None
-* Return : The status of the IRQ interrupt after masking (SET or RESET).
-*******************************************************************************/
-FlagStatus VIC_GetIRQStatus(u16 VIC_Source)
-{
- u32 VIC_Mask = 1;
- if (VIC_Source < VIC_REGISTER_NUMBER)
- {
- if ((VIC0->ISR | VIC_Mask << VIC_Source) != RESET)
- return SET;
- else
- return RESET;
- }
- else
- {
- if ((VIC1->ISR | VIC_Mask << (VIC_Source - VIC_REGISTER_NUMBER)) != RESET)
- return SET;
- else
- return RESET;
- }
-}
-
-/*******************************************************************************
-* Function Name : VIC_GetFIQStatus
-* Description : Get the status of interrupts after FIQ masking
-* Input : VIC_Source: specifies the number of the source line.
-* This parameter can be one of the following values:
-* - WDG_ITLine : VIC source 0
-* - SW_ITLine : VIC source 1
-* - ARMRX_ITLine : VIC source 2
-* - ARMTX_ITLine : VIC source 3
-* - TIM0_ITLine : VIC source 4
-* - TIM1_ITLine : VIC source 5
-* - TIM2_ITLine : VIC source 6
-* - TIM3_ITLine : VIC source 7
-* - USBHP_ITLine : VIC source 8
-* - USBLP_ITLine : VIC source 9
-* - SCU_ITLine : VIC source 10
-* - ENET_ITLine : VIC source 11
-* - DMA_ITLine : VIC source 12
-* - CAN_ITLine : VIC source 13
-* - MC_ITLine : VIC source 14
-* - ADC_ITLine : VIC source 15
-* - UART0_ITLine : VIC source 16
-* - UART1_ITLine : VIC source 17
-* - UART2_ITLine : VIC source 18
-* - I2C0_ITLine : VIC source 19
-* - I2C1_ITLine : VIC source 20
-* - SSP0_ITLine : VIC source 21
-* - SSP1_ITLine : VIC source 22
-* - LVD_ITLine : VIC source 23
-* - RTC_ITLine : VIC source 24
-* - WIU_ITLine : VIC source 25
-* - EXTIT0_ITLine: VIC source 26
-* - EXTIT1_ITLine: VIC source 27
-* - EXTIT2_ITLine: VIC source 28
-* - EXTIT3_ITLine: VIC source 29
-* - USBWU_ITLine : VIC source 30
-* - PFQBC_ITLine : VIC source 31
-* Output : None
-* Return : The status of the FIQ interrupt after masking (SET or RESET)
-*******************************************************************************/
-FlagStatus VIC_GetFIQStatus(u16 VIC_Source)
-{
- u32 VIC_Mask = 1;
- if (VIC_Source < VIC_REGISTER_NUMBER)
- {
- if ((VIC0->RINTSR | VIC_Mask << VIC_Source) != RESET)
- return SET;
- else
- return RESET;
- }
- else
- {
- if ((VIC1->RINTSR | VIC_Mask << (VIC_Source - VIC_REGISTER_NUMBER)) != RESET)
- return SET;
- else
- return RESET;
- }
-}
-
-/*******************************************************************************
-* Function Name : VIC_GetSourceITStatus
-* Description : Get the status of the source interrupts before masking.
-* Input : VIC_Source: specifies the number of the source line.
-* This parameter can be one of the following values:
-* - WDG_ITLine : VIC source 0
-* - SW_ITLine : VIC source 1
-* - ARMRX_ITLine : VIC source 2
-* - ARMTX_ITLine : VIC source 3
-* - TIM0_ITLine : VIC source 4
-* - TIM1_ITLine : VIC source 5
-* - TIM2_ITLine : VIC source 6
-* - TIM3_ITLine : VIC source 7
-* - USBHP_ITLine : VIC source 8
-* - USBLP_ITLine : VIC source 9
-* - SCU_ITLine : VIC source 10
-* - ENET_ITLine : VIC source 11
-* - DMA_ITLine : VIC source 12
-* - CAN_ITLine : VIC source 13
-* - MC_ITLine : VIC source 14
-* - ADC_ITLine : VIC source 15
-* - UART0_ITLine : VIC source 16
-* - UART1_ITLine : VIC source 17
-* - UART2_ITLine : VIC source 18
-* - I2C0_ITLine : VIC source 19
-* - I2C1_ITLine : VIC source 20
-* - SSP0_ITLine : VIC source 21
-* - SSP1_ITLine : VIC source 22
-* - LVD_ITLine : VIC source 23
-* - RTC_ITLine : VIC source 24
-* - WIU_ITLine : VIC source 25
-* - EXTIT0_ITLine: VIC source 26
-* - EXTIT1_ITLine: VIC source 27
-* - EXTIT2_ITLine: VIC source 28
-* - EXTIT3_ITLine: VIC source 29
-* - USBWU_ITLine : VIC source 30
-* - PFQBC_ITLine : VIC source 31
-* Output : None
-* Return : The status of the source interrupt before masking
-*******************************************************************************/
-FlagStatus VIC_GetSourceITStatus(u16 VIC_Source)
-{
- u32 VIC_Mask = 1;
- if (VIC_Source < VIC_REGISTER_NUMBER)
- {
- if ((VIC0->FSR | VIC_Mask << VIC_Source) != RESET)
- return SET;
- else
- return RESET;
- }
- else
- {
- if ((VIC1->FSR | VIC_Mask << (VIC_Source - VIC_REGISTER_NUMBER)) != RESET)
- return SET;
- else
- return RESET;
- }
-}
-
-/*******************************************************************************
-* Function Name : VIC_ITModeConfig
-* Description : Select the type of interrupt (IRQ or FIQ)
-* Input1 : VIC_Source: specifies the number of the source line.
-* This parameter can be one of the following values:
-* - WDG_ITLine : VIC source 0
-* - SW_ITLine : VIC source 1
-* - ARMRX_ITLine : VIC source 2
-* - ARMTX_ITLine : VIC source 3
-* - TIM0_ITLine : VIC source 4
-* - TIM1_ITLine : VIC source 5
-* - TIM2_ITLine : VIC source 6
-* - TIM3_ITLine : VIC source 7
-* - USBHP_ITLine : VIC source 8
-* - USBLP_ITLine : VIC source 9
-* - SCU_ITLine : VIC source 10
-* - ENET_ITLine : VIC source 11
-* - DMA_ITLine : VIC source 12
-* - CAN_ITLine : VIC source 13
-* - MC_ITLine : VIC source 14
-* - ADC_ITLine : VIC source 15
-* - UART0_ITLine : VIC source 16
-* - UART1_ITLine : VIC source 17
-* - UART2_ITLine : VIC source 18
-* - I2C0_ITLine : VIC source 19
-* - I2C1_ITLine : VIC source 20
-* - SSP0_ITLine : VIC source 21
-* - SSP1_ITLine : VIC source 22
-* - LVD_ITLine : VIC source 23
-* - RTC_ITLine : VIC source 24
-* - WIU_ITLine : VIC source 25
-* - EXTIT0_ITLine: VIC source 26
-* - EXTIT1_ITLine: VIC source 27
-* - EXTIT2_ITLine: VIC source 28
-* - EXTIT3_ITLine: VIC source 29
-* - USBWU_ITLine : VIC source 30
-* - PFQBC_ITLine : VIC source 31
-* Input2 : VIC_LineMode :specifies the type of interrupt of the source
-* line. This parameter can be one of the following values:
-* - VIC_IRQ: the correspondent line is configured as IRQ.
-* - VIC_FIQ: the correspondent line is configured as FIQ.
-* Output : None
-* Return : None
-*******************************************************************************/
-static void VIC_ITModeConfig(u16 VIC_Source, VIC_ITLineMode VIC_LineMode)
-{
- u32 VIC_Mask = 1;
-
- if (VIC_Source < VIC_REGISTER_NUMBER) /* VIC0 */
- {
- if (VIC_LineMode == VIC_IRQ)
- VIC0->INTSR &= ~(VIC_Mask << VIC_Source);
- else /* VIC_LineMode == VIC_FIQ */
- VIC0->INTSR |= (VIC_Mask << VIC_Source);
- }
- else /* VIC1 */
- {
- if (VIC_LineMode == VIC_IRQ)
- VIC1->INTSR &= ~(VIC_Mask << (VIC_Source - VIC_REGISTER_NUMBER));
- else /* VIC_LineMode == VIC_FIQ */
- VIC1->INTSR |= (VIC_Mask << (VIC_Source - VIC_REGISTER_NUMBER));
- }
-}
-
-/*******************************************************************************
-* Function Name : VIC_ITCmd
-* Description : Enable or disable the interrupt request lines.
-* Input1 : VIC_Source: specifies the number of the source line.
-* This parameter can be one of the following values:
-* - WDG_ITLine : VIC source 0
-* - SW_ITLine : VIC source 1
-* - ARMRX_ITLine : VIC source 2
-* - ARMTX_ITLine : VIC source 3
-* - TIM0_ITLine : VIC source 4
-* - TIM1_ITLine : VIC source 5
-* - TIM2_ITLine : VIC source 6
-* - TIM3_ITLine : VIC source 7
-* - USBHP_ITLine : VIC source 8
-* - USBLP_ITLine : VIC source 9
-* - SCU_ITLine : VIC source 10
-* - ENET_ITLine : VIC source 11
-* - DMA_ITLine : VIC source 12
-* - CAN_ITLine : VIC source 13
-* - MC_ITLine : VIC source 14
-* - ADC_ITLine : VIC source 15
-* - UART0_ITLine : VIC source 16
-* - UART1_ITLine : VIC source 17
-* - UART2_ITLine : VIC source 18
-* - I2C0_ITLine : VIC source 19
-* - I2C1_ITLine : VIC source 20
-* - SSP0_ITLine : VIC source 21
-* - SSP1_ITLine : VIC source 22
-* - LVD_ITLine : VIC source 23
-* - RTC_ITLine : VIC source 24
-* - WIU_ITLine : VIC source 25
-* - EXTIT0_ITLine: VIC source 26
-* - EXTIT1_ITLine: VIC source 27
-* - EXTIT2_ITLine: VIC source 28
-* - EXTIT3_ITLine: VIC source 29
-* - USBWU_ITLine : VIC source 30
-* - PFQBC_ITLine : VIC source 31
-* Input2 : FMI_NewState: specifies the line status.
-* This parameter can be one of the following values:
-* - ENABLE: The line is enabled.
-* - DISABLE: The line is disabled.
-* Output : None
-* Return : None
-*******************************************************************************/
-void VIC_ITCmd(u16 VIC_Source, FunctionalState VIC_NewState)
-{
- u32 VIC_Mask = 1;
-
- if (VIC_NewState == ENABLE)
- {
- if (VIC_Source < VIC_REGISTER_NUMBER) /* VIC0 */
- VIC0->INTER |= (VIC_Mask << VIC_Source);
- else /* VIC1 */
- VIC1->INTER |= (VIC_Mask << (VIC_Source - VIC_REGISTER_NUMBER));
- }
- else /* VIC_NewState == DISABLE */
- {
- if (VIC_Source < VIC_REGISTER_NUMBER) /* VIC0 */
- VIC0->INTECR |= (VIC_Mask << VIC_Source);
- else /* VIC1 */
- VIC1->INTECR |= (VIC_Mask << (VIC_Source - VIC_REGISTER_NUMBER));
- }
-}
-
-/*******************************************************************************
-* Function Name : VIC_SWITCmd
-* Description : Generate a software interrupt for the specific source
-* interrupt.
-* Input1 : VIC_Source: specifies the number of the source line.
-* This parameter can be one of the following values:
-* - WDG_ITLine : VIC source 0
-* - SW_ITLine : VIC source 1
-* - ARMRX_ITLine : VIC source 2
-* - ARMTX_ITLine : VIC source 3
-* - TIM0_ITLine : VIC source 4
-* - TIM1_ITLine : VIC source 5
-* - TIM2_ITLine : VIC source 6
-* - TIM3_ITLine : VIC source 7
-* - USBHP_ITLine : VIC source 8
-* - USBLP_ITLine : VIC source 9
-* - SCU_ITLine : VIC source 10
-* - ENET_ITLine : VIC source 11
-* - DMA_ITLine : VIC source 12
-* - CAN_ITLine : VIC source 13
-* - MC_ITLine : VIC source 14
-* - ADC_ITLine : VIC source 15
-* - UART0_ITLine : VIC source 16
-* - UART1_ITLine : VIC source 17
-* - UART2_ITLine : VIC source 18
-* - I2C0_ITLine : VIC source 19
-* - I2C1_ITLine : VIC source 20
-* - SSP0_ITLine : VIC source 21
-* - SSP1_ITLine : VIC source 22
-* - LVD_ITLine : VIC source 23
-* - RTC_ITLine : VIC source 24
-* - WIU_ITLine : VIC source 25
-* - EXTIT0_ITLine: VIC source 26
-* - EXTIT1_ITLine: VIC source 27
-* - EXTIT2_ITLine: VIC source 28
-* - EXTIT3_ITLine: VIC source 29
-* - USBWU_ITLine : VIC source 30
-* - PFQBC_ITLine : VIC source 31
-* Input2 : FMI_NewState: specifies the software interrupt status.
-* This parameter can be one of the following values:
-* - ENABLE: The software interrupt is enabled.
-* - DISABLE: The software interrupt is disabled.
-* Output : None
-* Return : None
-*******************************************************************************/
-void VIC_SWITCmd(u16 VIC_Source, FunctionalState VIC_NewState)
-{
- u32 VIC_Mask = 1;
-
- if (VIC_NewState == ENABLE)
- {
- if (VIC_Source < VIC_REGISTER_NUMBER) /* VIC0 */
- VIC0->SWINTR |= (VIC_Mask << VIC_Source);
- else /* VIC1 */
- VIC1->SWINTR |= (VIC_Mask << (VIC_Source - VIC_REGISTER_NUMBER));
- }
- else /* VIC_NewState == DISABLE */
- {
- if (VIC_Source < VIC_REGISTER_NUMBER) /* VIC0 */
- VIC0->SWINTCR = (VIC_Mask << VIC_Source);
- else /* VIC1 */
- VIC1->SWINTCR = (VIC_Mask << (VIC_Source - VIC_REGISTER_NUMBER));
- }
-}
-
-/*******************************************************************************
-* Function Name : VIC_ProtectionCmd
-* Description : Enable or Disable the register access protection.
-* Input : FMI_NewState: specifies the protection status.
-* This parameter can be one of the following values:
-* - ENABLE: The protection is enabled.
-* - DISABLE: The protection is disabled.
-* Output : None
-* Return : None
-*******************************************************************************/
-void VIC_ProtectionCmd(FunctionalState VIC_NewState)
-{
- if (VIC_NewState == ENABLE)
- {
- VIC0->PER |= VIC_PROTECTION_ENABLE_MASK;
- VIC1->PER |= VIC_PROTECTION_ENABLE_MASK;
- }
- else
- {
- VIC0->PER &= VIC_PROTECTION_DISABLE_MASK;
- VIC1->PER &= VIC_PROTECTION_DISABLE_MASK;
- }
-}
-
-/*******************************************************************************
-* Function Name : VIC_GetCurrentISRAdd
-* Description : Get the address of the current active ISR.
-* Input : VICx: specifies the VIC peripheral
-* This parameter can be one of the following values:
-* - VIC0: To select VIC0.
-* - VIC1: To select VIC1.
-* Output : None
-* Return : The Address of the active ISR.
-*******************************************************************************/
-u32 VIC_GetCurrentISRAdd(VIC_TypeDef* VICx)
-{
- return VICx->VAR;
-}
-
-/*******************************************************************************
-* Function Name : VIC_ISRVectAddConfig
-* Description : Configuration of the ISR vector address.
-* Input1 : VIC_Source: specifies the number of the source line.
-* This parameter can be one of the following values:
-* - WDG_ITLine : VIC source 0
-* - SW_ITLine : VIC source 1
-* - ARMRX_ITLine : VIC source 2
-* - ARMTX_ITLine : VIC source 3
-* - TIM0_ITLine : VIC source 4
-* - TIM1_ITLine : VIC source 5
-* - TIM2_ITLine : VIC source 6
-* - TIM3_ITLine : VIC source 7
-* - USBHP_ITLine : VIC source 8
-* - USBLP_ITLine : VIC source 9
-* - SCU_ITLine : VIC source 10
-* - ENET_ITLine : VIC source 11
-* - DMA_ITLine : VIC source 12
-* - CAN_ITLine : VIC source 13
-* - MC_ITLine : VIC source 14
-* - ADC_ITLine : VIC source 15
-* - UART0_ITLine : VIC source 16
-* - UART1_ITLine : VIC source 17
-* - UART2_ITLine : VIC source 18
-* - I2C0_ITLine : VIC source 19
-* - I2C1_ITLine : VIC source 20
-* - SSP0_ITLine : VIC source 21
-* - SSP1_ITLine : VIC source 22
-* - LVD_ITLine : VIC source 23
-* - RTC_ITLine : VIC source 24
-* - WIU_ITLine : VIC source 25
-* - EXTIT0_ITLine: VIC source 26
-* - EXTIT1_ITLine: VIC source 27
-* - EXTIT2_ITLine: VIC source 28
-* - EXTIT3_ITLine: VIC source 29
-* - USBWU_ITLine : VIC source 30
-* - PFQBC_ITLine : VIC source 31
-* Input2 : VIC_Priority: specifies the priority of the interrupt.
-* It can be a value from 0 to 15. 0 is the highest priority.
-* Input3 : void (*VIC_VectAddress)(void): specifies the ISR vector
-* address pointer.
-* Output : None
-* Return : None
-*******************************************************************************/
-static void VIC_ISRVectAddConfig(u16 VIC_Source, u16 VIC_Priority, \
- void (*VIC_VectAddress)(void))
-{
- if (VIC_Source < VIC_REGISTER_NUMBER) /* VIC0 */
- VIC0->VAiR[VIC_Priority] = (u32)VIC_VectAddress;
- else /* VIC1 */
- VIC1->VAiR[VIC_Priority] = (u32)VIC_VectAddress;
-}
-
-/*******************************************************************************
-* Function Name : VIC_GetISRVectAdd
-* Description : Get the ISR vector address of the correspondent line.
-* Input : VIC_Source: specifies the number of the source line.
-* This parameter can be one of the following values:
-* - WDG_ITLine : VIC source 0
-* - SW_ITLine : VIC source 1
-* - ARMRX_ITLine : VIC source 2
-* - ARMTX_ITLine : VIC source 3
-* - TIM0_ITLine : VIC source 4
-* - TIM1_ITLine : VIC source 5
-* - TIM2_ITLine : VIC source 6
-* - TIM3_ITLine : VIC source 7
-* - USBHP_ITLine : VIC source 8
-* - USBLP_ITLine : VIC source 9
-* - SCU_ITLine : VIC source 10
-* - ENET_ITLine : VIC source 11
-* - DMA_ITLine : VIC source 12
-* - CAN_ITLine : VIC source 13
-* - MC_ITLine : VIC source 14
-* - ADC_ITLine : VIC source 15
-* - UART0_ITLine : VIC source 16
-* - UART1_ITLine : VIC source 17
-* - UART2_ITLine : VIC source 18
-* - I2C0_ITLine : VIC source 19
-* - I2C1_ITLine : VIC source 20
-* - SSP0_ITLine : VIC source 21
-* - SSP1_ITLine : VIC source 22
-* - LVD_ITLine : VIC source 23
-* - RTC_ITLine : VIC source 24
-* - WIU_ITLine : VIC source 25
-* - EXTIT0_ITLine: VIC source 26
-* - EXTIT1_ITLine: VIC source 27
-* - EXTIT2_ITLine: VIC source 28
-* - EXTIT3_ITLine: VIC source 29
-* - USBWU_ITLine : VIC source 30
-* - PFQBC_ITLine : VIC source 31
-* Output : None
-* Return : The correspondent ISR vector address.
-*******************************************************************************/
-u32 VIC_GetISRVectAdd(u16 VIC_Source)
-{
- if (VIC_Source < VIC_REGISTER_NUMBER) /* VIC0 */
- return VIC0->VAiR[VIC_Source];
- else /* VIC1 */
- return VIC1->VAiR[VIC_Source - VIC_REGISTER_NUMBER];
-}
-
-/*******************************************************************************
-* Function Name : VIC_VectEnableConfig
-* Description : Enable the vector interrupt.
-* Input1 : VIC_Source: specifies the number of the source line.
-* This parameter can be one of the following values:
-* - WDG_ITLine : VIC source 0
-* - SW_ITLine : VIC source 1
-* - ARMRX_ITLine : VIC source 2
-* - ARMTX_ITLine : VIC source 3
-* - TIM0_ITLine : VIC source 4
-* - TIM1_ITLine : VIC source 5
-* - TIM2_ITLine : VIC source 6
-* - TIM3_ITLine : VIC source 7
-* - USBHP_ITLine : VIC source 8
-* - USBLP_ITLine : VIC source 9
-* - SCU_ITLine : VIC source 10
-* - ENET_ITLine : VIC source 11
-* - DMA_ITLine : VIC source 12
-* - CAN_ITLine : VIC source 13
-* - MC_ITLine : VIC source 14
-* - ADC_ITLine : VIC source 15
-* - UART0_ITLine : VIC source 16
-* - UART1_ITLine : VIC source 17
-* - UART2_ITLine : VIC source 18
-* - I2C0_ITLine : VIC source 19
-* - I2C1_ITLine : VIC source 20
-* - SSP0_ITLine : VIC source 21
-* - SSP1_ITLine : VIC source 22
-* - LVD_ITLine : VIC source 23
-* - RTC_ITLine : VIC source 24
-* - WIU_ITLine : VIC source 25
-* - EXTIT0_ITLine: VIC source 26
-* - EXTIT1_ITLine: VIC source 27
-* - EXTIT2_ITLine: VIC source 28
-* - EXTIT3_ITLine: VIC source 29
-* - USBWU_ITLine : VIC source 30
-* - PFQBC_ITLine : VIC source 31
-* Input2 : VIC_Priority: specifies the priority of the interrupt.
-* It can be a value from 0 to 15. 0 is the highest priority.
-* Output : None
-* Return : None
-*******************************************************************************/
-static void VIC_VectEnableConfig(u16 VIC_Source, u16 VIC_Priority)
-{
- if (VIC_Source < VIC_REGISTER_NUMBER) /* VIC0 */
- VIC0->VCiR[VIC_Priority] |= VIC_VECTOR_ENABLE_MASK;
- else /* VIC1 */
- VIC1->VCiR[VIC_Priority] |= VIC_VECTOR_ENABLE_MASK;
-}
-
-/*******************************************************************************
-* Function Name : VIC_ITSourceConfig
-* Description : Select the interrupt source.
-* Input1 : VIC_Source: specifies the number of the source line.
-* This parameter can be one of the following values:
-* - WDG_ITLine : VIC source 0
-* - SW_ITLine : VIC source 1
-* - ARMRX_ITLine : VIC source 2
-* - ARMTX_ITLine : VIC source 3
-* - TIM0_ITLine : VIC source 4
-* - TIM1_ITLine : VIC source 5
-* - TIM2_ITLine : VIC source 6
-* - TIM3_ITLine : VIC source 7
-* - USBHP_ITLine : VIC source 8
-* - USBLP_ITLine : VIC source 9
-* - SCU_ITLine : VIC source 10
-* - ENET_ITLine : VIC source 11
-* - DMA_ITLine : VIC source 12
-* - CAN_ITLine : VIC source 13
-* - MC_ITLine : VIC source 14
-* - ADC_ITLine : VIC source 15
-* - UART0_ITLine : VIC source 16
-* - UART1_ITLine : VIC source 17
-* - UART2_ITLine : VIC source 18
-* - I2C0_ITLine : VIC source 19
-* - I2C1_ITLine : VIC source 20
-* - SSP0_ITLine : VIC source 21
-* - SSP1_ITLine : VIC source 22
-* - LVD_ITLine : VIC source 23
-* - RTC_ITLine : VIC source 24
-* - WIU_ITLine : VIC source 25
-* - EXTIT0_ITLine: VIC source 26
-* - EXTIT1_ITLine: VIC source 27
-* - EXTIT2_ITLine: VIC source 28
-* - EXTIT3_ITLine: VIC source 29
-* - USBWU_ITLine : VIC source 30
-* - PFQBC_ITLine : VIC source 31
-* Input2 : VIC_Priority: specifies the priority of the interrupt.
-* It can be a value from 0 to 15. 0 is the highest priority.
-* Output : None
-* Return : None
-*******************************************************************************/
-static void VIC_ITSourceConfig(u16 VIC_Source, u16 VIC_Priority)
-{
- if (VIC_Source < VIC_REGISTER_NUMBER) /* VIC0 */
- {
- VIC0->VCiR[VIC_Priority] &= VIC_IT_SOURCE_MASK;
- VIC0->VCiR[VIC_Priority] |= VIC_Source;
- }
- else /* VIC1 */
- {
- VIC1->VCiR[VIC_Priority] &= VIC_IT_SOURCE_MASK;
- VIC1->VCiR[VIC_Priority] |= VIC_Source - VIC_REGISTER_NUMBER;
- }
-}
-
-/*******************************************************************************
-* Function Name : VIC_Config
-* Description : Configure the ISR, the line, the mode and the priority for
-* each interrupt source line.
-* Input1 : VIC_Source: specifies the number of the source line.
-* This parameter can be one of the following values:
-* - WDG_ITLine : VIC source 0
-* - SW_ITLine : VIC source 1
-* - ARMRX_ITLine : VIC source 2
-* - ARMTX_ITLine : VIC source 3
-* - TIM0_ITLine : VIC source 4
-* - TIM1_ITLine : VIC source 5
-* - TIM2_ITLine : VIC source 6
-* - TIM3_ITLine : VIC source 7
-* - USBHP_ITLine : VIC source 8
-* - USBLP_ITLine : VIC source 9
-* - SCU_ITLine : VIC source 10
-* - ENET_ITLine : VIC source 11
-* - DMA_ITLine : VIC source 12
-* - CAN_ITLine : VIC source 13
-* - MC_ITLine : VIC source 14
-* - ADC_ITLine : VIC source 15
-* - UART0_ITLine : VIC source 16
-* - UART1_ITLine : VIC source 17
-* - UART2_ITLine : VIC source 18
-* - I2C0_ITLine : VIC source 19
-* - I2C1_ITLine : VIC source 20
-* - SSP0_ITLine : VIC source 21
-* - SSP1_ITLine : VIC source 22
-* - LVD_ITLine : VIC source 23
-* - RTC_ITLine : VIC source 24
-* - WIU_ITLine : VIC source 25
-* - EXTIT0_ITLine: VIC source 26
-* - EXTIT1_ITLine: VIC source 27
-* - EXTIT2_ITLine: VIC source 28
-* - EXTIT3_ITLine: VIC source 29
-* - USBWU_ITLine : VIC source 30
-* - PFQBC_ITLine : VIC source 31
-* Input2 : VIC_LineMode :specifies the type of interrupt of the source
-* line. This parameter can be one of the following values:
-* - VIC_IRQ: the correspondent line is configured as IRQ.
-* - VIC_FIQ: the correspondent line is configured as FIQ.
-* Input3 : VIC_Priority: specifies the priority of the interrupt.
-* It can be a value from 0 to 15. 0 is the highest priority.
-* Output : None
-* Return : None
-*******************************************************************************/
-void VIC_Config(u16 VIC_Source, VIC_ITLineMode VIC_LineMode, u8 VIC_Priority)
-{
- switch (VIC_Source)
- {
- case 0: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, WDG_IRQHandler);
- break;
-
- case 1: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, SW_IRQHandler);
- break;
-
- case 2: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, ARMRX_IRQHandler);
- break;
-
- case 3: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, ARMTX_IRQHandler);
- break;
-
- case 4: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, TIM0_IRQHandler);
- break;
-
- case 5: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, TIM1_IRQHandler);
- break;
-
- case 6: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, TIM2_IRQHandler);
- break;
-
- case 7: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, TIM3_IRQHandler);
- break;
-
- case 8: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, USBHP_IRQHandler);
- break;
-
- case 9: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, USBLP_IRQHandler);
- break;
-
- case 10: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, SCU_IRQHandler);
- break;
-
- case 11: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, ENET_IRQHandler);
- break;
-
- case 12: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, DMA_IRQHandler);
- break;
-
- case 13: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, CAN_IRQHandler);
- break;
-
- case 14: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, MC_IRQHandler);
- break;
-
- case 15: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, ADC_IRQHandler);
- break;
-
- case 16: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, UART0_IRQHandler);
- break;
-
- case 17: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, UART1_IRQHandler);
- break;
-
- case 18: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, UART2_IRQHandler);
- break;
-
- case 19: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, I2C0_IRQHandler);
- break;
-
- case 20: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, I2C1_IRQHandler);
- break;
-
- case 21: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, SSP0_IRQHandler);
- break;
-
- case 22: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, SSP1_IRQHandler);
- break;
-
- case 23: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, LVD_IRQHandler);
- break;
-
- case 24: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, RTC_IRQHandler);
- break;
-
- case 25: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, WIU_IRQHandler);
- break;
-
- case 26: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, EXTIT0_IRQHandler);
- break;
-
- case 27: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, EXTIT1_IRQHandler);
- break;
-
- case 28: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, EXTIT2_IRQHandler);
- break;
-
- case 29: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, EXTIT3_IRQHandler);
- break;
-
- case 30: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, USBWU_IRQHandler);
- break;
-
- case 31: VIC_ISRVectAddConfig(VIC_Source, VIC_Priority, PFQBC_IRQHandler);
- break;
-
- default: break;
- }
- VIC_ITModeConfig(VIC_Source, VIC_LineMode);
- VIC_VectEnableConfig(VIC_Source, VIC_Priority);
- VIC_ITSourceConfig(VIC_Source, VIC_Priority);
-}
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/src/91x_wdg.c b/uc_str912/prj_template91x/str91x_lib/src/91x_wdg.c deleted file mode 100644 index f933635..0000000 --- a/uc_str912/prj_template91x/str91x_lib/src/91x_wdg.c +++ /dev/null @@ -1,277 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_wdg.c
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file provides all the WDG software functions.
-********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Includes ------------------------------------------------------------------*/
-#include "91x_wdg.h"
-#include "91x_scu.h"
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-
-
-/* WDG End of Count interrupt Flag */
-#define WDG_FLAG_EC 0x0001
-
-
-/* WDG End of Count interrupt request */
-#define WDG_IT_EC 0x0001
-
-
-
-/* WDG Start/Stop counter */
-#define WDG_Counter_Start 0x0002
-#define WDG_Counter_Stop 0xFFFD
-
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Registers reset value */
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/******************************************************************************
-* Function Name : WDG_DeInit
-* Description : Deinitializes the WDG peripheral registers to their default
-* reset values.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void WDG_DeInit(void)
-{
-
- SCU_APBPeriphReset(__WDG, ENABLE); /*WDG peripheral under Reset */
- SCU_APBPeriphReset(__WDG, DISABLE); /*WDG peripheral Reset off*/
-
-}
-
-/*******************************************************************************
-* Function Name : WDG_StructInit
-* Description : Fills the WDG_InitTypeDef structure member with its reset
-* value.
-* Input : WDG_InitStruct : pointer to a WDG_InitTypeDef structure
-* which will be initialized.
-* Output : None
-* Return : None
-*******************************************************************************/
-void WDG_StructInit(WDG_InitTypeDef *WDG_InitStruct)
-{
- /* Select the Watchdog running mode*/
- WDG_InitStruct->WDG_Mode = WDG_Mode_Timer;
-
- /* Select the source clock */
- WDG_InitStruct-> WDG_ClockSource = WDG_ClockSource_Apb;
-
- /* Initialize Prescaler */
- WDG_InitStruct->WDG_Prescaler =0xFF;
-
- /* Initialize Preload */
- WDG_InitStruct->WDG_Preload =0xFFFF;
-
-
-}
-
-/*******************************************************************************
-* Function Name : WDG_Init
-* Description : Initializes WDG peripheral according to the specified
-* parameters in the WDG_InitStruct.
-* Input : WDG_InitStruct: pointer to a WDG_InitTypeDef structure that
-* contains the configuration information for the WDG peripheral.
-* Output : None
-* Return : None
-*******************************************************************************/
-void WDG_Init(WDG_InitTypeDef* WDG_InitStruct)
-{
-
-
- if(WDG_InitStruct->WDG_ClockSource == WDG_ClockSource_Apb)
- {
- /* Select The APB clock as clock source */
- WDG->CR &= WDG_ClockSource_Apb;
- }
-
- else
- {
- /* Select the RTC clock as source */
- WDG->CR |= WDG_ClockSource_Rtc ;
- }
-
-
- /* Configure WDG Prescaler register value */
- WDG->PR = WDG_InitStruct->WDG_Prescaler;
-
- /* Configure WDG Pre-load register value */
- WDG->VR = WDG_InitStruct->WDG_Preload ;
-
-
- if(WDG_InitStruct->WDG_Mode == WDG_Mode_Timer)
- {
- /* Select Timer mode */
- WDG->CR &= WDG_Mode_Timer;
- }
- else
- {
- /* Select WDG mode */
- WDG->CR |= WDG_Mode_Wdg ;
- }
-
-
-}
-
-/*******************************************************************************
-* Function Name : WDG_Cmd
-* Description : Enables or disables the WDG peripheral.
-* Input : NewState: new state of the WDG peripheral (Newstate can be
-* ENABLE or DISABLE)
-* Output : None
-* Return : None
-*******************************************************************************/
-void WDG_Cmd(FunctionalState NewState )
-{
- if((WDG->CR & WDG_Mode_Wdg) == 0)
- {
- /* Timer mode */
- if(NewState == ENABLE)
- {
- /* Start timer by setting SC bit in Control register */
- WDG->CR |= WDG_Counter_Start;
- }
- else
- {
- /* Stop timer by clearning SC bit in Control register */
- WDG->CR &= WDG_Counter_Stop;
- }
- }
- else
- {
- /* Watchdog mode */
- if(NewState == ENABLE)
- {
- WDG->KR = WDG_KeyValue1;
- WDG->KR = WDG_KeyValue2;
- }
- }
-}
-
-/*******************************************************************************
-* Function Name : WDG_ITConfig
-* Description : Enables or disables the WDG End of Count(EC) interrupt.
-* Input : Newstate: new state of the End of Count(EC) WDG interrupt.
-* This parameter can be: ENABLE or DISABLE.
-* Output : None
-* Return : None
-*******************************************************************************/
-void WDG_ITConfig(FunctionalState NewState)
-{
- if(NewState == ENABLE)
- {
- /* Enable the End of Count interrupt */
- WDG->MR |= WDG_IT_EC;
- }
- else
- {
- /* Disable the End of Count interrupt */
- WDG->MR &= ~WDG_IT_EC;
- }
-}
-
-/*******************************************************************************
-* Function Name : WDG_GetCounter
-* Description : Gets the WDG’s current counter value.
-* Input : None
-* Output : None
-* Return : The WDG current counter value
-*******************************************************************************/
-u16 WDG_GetCounter(void)
-{
- return WDG->CNT;
-}
-
-
-
-
-/*******************************************************************************
-* Function Name : WDG_GetITStatus
-* Description : Checks whether the WDG End of Count(EC) interrupt is occured or not.
-* Input : None
-* Output : None
-* Return : The new state of WDG_IT (SET or RESET).
-*******************************************************************************/
-ITStatus WDG_GetITStatus(void)
-{
- if(((WDG->SR & WDG_IT_EC) != RESET )&&((WDG->MR & WDG_IT_EC) != RESET ))
- {
- return SET;
- }
- else
- {
- return RESET;
- }
-}
-
-/*******************************************************************************
-* Function Name : WDG_ClearITPendingBit
-* Description : Clears the WDG's End of Count(EC) interrupt pending bit.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void WDG_ClearITPendingBit(void)
-{
- /* Clear the EC pending bit */
- WDG->SR &= ~WDG_IT_EC;
-
-}
-
-/*******************************************************************************
-* Function Name : WDG_ClearFlag
-* Description : Clears the WDG's End of Count(EC) Flag.
-* Input : None
-* Output : None
-* Return : None
-*******************************************************************************/
-void WDG_ClearFlag(void)
-{
- /* Clear the EC Flag */
-
- WDG->SR &= ~WDG_FLAG_EC;
-
-}
-
-
-/*******************************************************************************
-* Function Name : WDG_GetFlagStatus
-* Description : Checks whether the WDG End of Count(EC) flag is set or not.
-* Input : None
-* Output : None
-* Return : The new state of the WDG_FLAG (SET or RESET).
-*******************************************************************************/
-FlagStatus WDG_GetFlagStatus(void)
-{
- if((WDG->SR & WDG_FLAG_EC) != RESET )
- {
- return SET;
- }
- else
- {
- return RESET;
- }
-}
-
-
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
diff --git a/uc_str912/prj_template91x/str91x_lib/src/91x_wiu.c b/uc_str912/prj_template91x/str91x_lib/src/91x_wiu.c deleted file mode 100644 index 3154a3c..0000000 --- a/uc_str912/prj_template91x/str91x_lib/src/91x_wiu.c +++ /dev/null @@ -1,190 +0,0 @@ -/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
-* File Name : 91x_wiu.c
-* Author : MCD Application Team
-* Date First Issued : 05/18/2006 : Version 1.0
-* Description : This file provides all the WIU software functions.
-**********************************************************************************
-* History:
-* 05/24/2006 : Version 1.1
-* 05/18/2006 : Version 1.0
-**********************************************************************************
-* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH
-* CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT
-* OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
-* OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
-* CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*********************************************************************************/
-
-/* Standard include ----------------------------------------------------------*/
-#include "91x_wiu.h"
-#include "91x_scu.h"
-
-/* Include of other module interface headers ---------------------------------*/
-/* Local includes ------------------------------------------------------------*/
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Interface functions -------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/******************************************************************************
-* Function Name : WIU_Init
-* Description : Initializes the WIU unit according to the specified parameters
-* in the WIU_InitTypeDef structure.
-* Input : WIU_InitStruct: pointer to a WIU_InitTypeDef structure that
-* contains the configuration information for the WIU peripheral.
-* Output : None
-* Return : None
-******************************************************************************/
-void WIU_Init(WIU_InitTypeDef* WIU_InitStruct)
-{
- /* select the Wake-up line to be used */
- WIU->MR |= WIU_InitStruct->WIU_Line;
-
- /* configure the triggering edge */
- if(WIU_InitStruct->WIU_TriggerEdge == WIU_RisingEdge)
- {
- /* trigger on rising edge */
- WIU->TR |= WIU_InitStruct->WIU_Line;
- }
- else
- {
- /* trigger on falling edge */
- WIU->TR &= ~WIU_InitStruct->WIU_Line;
- }
-
- if(WIU_InitStruct->WIU_Mode == WIU_Mode_SWInterrupt)
- {
- /* enable interrupt mode */
- WIU->CTRL |= WIU_Mode_Interrupt;
-
- /* set the corresponding WUINT bit*/
- WIU->INTR |= WIU_InitStruct->WIU_Line;
- }
- else
- {
- /* configure the WIU mode */
- WIU->CTRL |= WIU_InitStruct->WIU_Mode;
- }
-}
-
-/******************************************************************************
-* Function Name : WIU_DeInit
-* Description : Deinitializes the WIU registers to their default reset values.
-* Input : None
-* Output : None
-* Return : None
-******************************************************************************/
-void WIU_DeInit(void)
-{
- /* initialize the WIU registers to their reset value */
- SCU_APBPeriphReset(__WIU, ENABLE);
- SCU_APBPeriphReset(__WIU, DISABLE);
-}
-
-/******************************************************************************
-* Function Name : WIU_StructInit
-* Description : Fills in a WIU_InitTypeDef structure with the reset value of
-* each parameter.
-* Input : WIU_InitStruct : pointer to a WIU_InitTypeDef structure
-* which will be initialized.
-* Output : None
-* Return : None
-******************************************************************************/
-void WIU_StructInit(WIU_InitTypeDef* WIU_InitStruct)
-{
- /* initialize the WIU_InitStruct fields to their reset values */
- WIU_InitStruct->WIU_Mode = 0x0 ;
- WIU_InitStruct->WIU_Line = 0x0 ;
- WIU_InitStruct->WIU_TriggerEdge = WIU_FallingEdge ;
-}
-
-
-/*******************************************************************************
-* Function Name : WIU_GenerateSWInterrupt
-* Description : Generates a Software interrupt.
-* Input : - WIU_Line: specifies the WIU lines to be enabled or
-* disabled. This parameter can be:
-* - WIU_Linex: External interrupt line x where x(0..31)
-* Output : None
-* Return : None
-*******************************************************************************/
-void WIU_GenerateSWInterrupt(u32 WIU_Line)
-{
- WIU->INTR |= WIU_Line;
-}
-
-/*******************************************************************************
-* Function Name : WIU_GetFlagStatus
-* Description : Checks whether the specified WIU line flag is set or not.
-* Input : - WIU_Line: specifies the WIU lines flag to check.
-* This parameter can be:
-* - WIU_Linex: External interrupt line x where x(0..31)
-* Output : None
-* Return : The new state of WIU_Line (SET or RESET).
-*******************************************************************************/
-FlagStatus WIU_GetFlagStatus(u32 WIU_Line)
-{
- if((WIU->PR & WIU_Line) != RESET)
- {
- return SET;
- }
- else
- {
- return RESET;
- }
-}
-
-/*******************************************************************************
-* Function Name : WIU_ClearFlag
-* Description : Clears the WIU’s line pending flags.
-* Input : - WIU_Line: specifies the WIU lines flags to clear.
-* This parameter can be:
-* - WIU_Linex: External interrupt line x where x(0..31)
-* Output : None
-* Return : None
-*******************************************************************************/
-void WIU_ClearFlag(u32 WIU_Line)
-{
- WIU->PR = WIU_Line;
-}
-
-/*******************************************************************************
-* Function Name : WIU_GetITStatus
-* Description : Checks whether the specified WIU line is asserted or not.
-* Input : - WIU_Line: specifies the WIU lines to check.
-* This parameter can be:
-* - WIU_Linex: External interrupt line x where x(0..31)
-* Output : None
-* Return : The new state of WIU_Line (SET or RESET).
-*******************************************************************************/
-ITStatus WIU_GetITStatus(u32 WIU_Line)
-{
- if(((WIU->PR & WIU_Line) != RESET)&& ((WIU->MR & WIU_Line) != RESET))
- {
- return SET;
- }
- else
- {
- return RESET;
- }
-}
-
-/*******************************************************************************
-* Function Name : WIU_ClearITPendingBit
-* Description : Clears the WIU’s line pending bits.
-* Input : - WIU_Line: specifies the WIU lines to clear.
-* This parameter can be:
-* - WIU_Linex: External interrupt line x where x(0..31)
-* Output : None
-* Return : None
-*******************************************************************************/
-void WIU_ClearITPendingBit(u32 WIU_Line)
-{
- WIU->PR = WIU_Line;
-}
-
-
-/******************* (C) COPYRIGHT 2006 STMicroelectronics *****END OF FILE****/
|
