summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--chipdrivers.h6
-rw-r--r--flash.h4
-rw-r--r--flashchips.c4
-rw-r--r--flashrom.c15
-rw-r--r--spi4ba.c265
-rw-r--r--spi4ba.h40
6 files changed, 330 insertions, 4 deletions
diff --git a/chipdrivers.h b/chipdrivers.h
index a3da865..20529d5 100644
--- a/chipdrivers.h
+++ b/chipdrivers.h
@@ -210,5 +210,11 @@ int spi_nbyte_read_4ba_ereg(struct flashctx *flash, unsigned int addr, uint8_t *
int spi_block_erase_20_4ba_ereg(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
int spi_block_erase_52_4ba_ereg(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
int spi_block_erase_d8_4ba_ereg(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
+int spi_byte_program_4ba_direct(struct flashctx *flash, unsigned int addr, uint8_t databyte);
+int spi_nbyte_program_4ba_direct(struct flashctx *flash, unsigned int addr, const uint8_t *bytes, unsigned int len);
+int spi_nbyte_read_4ba_direct(struct flashctx *flash, unsigned int addr, uint8_t *bytes, unsigned int len);
+int spi_block_erase_21_4ba_direct(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
+int spi_block_erase_5c_4ba_direct(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
+int spi_block_erase_dc_4ba_direct(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
#endif /* !__CHIPDRIVERS_H__ */
diff --git a/flash.h b/flash.h
index cc374b7..7f79387 100644
--- a/flash.h
+++ b/flash.h
@@ -127,6 +127,10 @@ enum write_granularity {
#define FEATURE_4BA_SUPPORT (1 << 10)
#define FEATURE_4BA_ONLY (1 << 11)
#define FEATURE_4BA_EXTENDED_ADDR_REG (1 << 12)
+#define FEATURE_4BA_DIRECT_READ (1 << 13)
+#define FEATURE_4BA_DIRECT_WRITE (1 << 14)
+#define FEATURE_4BA_ALL_ERASERS_DIRECT (1 << 15)
+#define FEATURE_4BA_ALL_DIRECT (FEATURE_4BA_DIRECT_READ | FEATURE_4BA_DIRECT_WRITE | FEATURE_4BA_ALL_ERASERS_DIRECT)
enum test_state {
OK = 0,
diff --git a/flashchips.c b/flashchips.c
index 21055e6..7cd12fa 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -14597,11 +14597,11 @@ const struct flashchip flashchips[] = {
/* supports SFDP */
/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
/* FOUR_BYTE_ADDR: supports 4-bytes addressing mode */
- .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_SUPPORT,
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_SUPPORT | FEATURE_4BA_DIRECT_READ,
.four_bytes_addr_funcs =
{
.enter_4ba = spi_enter_4ba_b7_we, /* enter 4-bytes addressing mode by CMD B7 + WREN */
- .read_nbyte = spi_nbyte_read_4ba, /* read from 4-bytes addressing mode */
+ .read_nbyte = spi_nbyte_read_4ba_direct, /* read directly from any mode, no need to enter 4ba */
.program_byte = spi_byte_program_4ba, /* write from 4-bytes addressing mode */
.program_nbyte = spi_nbyte_program_4ba /* write from 4-bytes addressing mode */
},
diff --git a/flashrom.c b/flashrom.c
index 79ddf76..6a6f5b6 100644
--- a/flashrom.c
+++ b/flashrom.c
@@ -2011,8 +2011,14 @@ int doit(struct flashctx *flash, int force, const char *filename, int read_it,
else if(flash->chip->feature_bits & FEATURE_4BA_EXTENDED_ADDR_REG) {
msg_cdbg("Using 4-bytes addressing with extended address register.\n");
}
- /* Go to 4-Bytes Addressing mode */
- else {
+ /* Go to 4-Bytes Addressing mode if selected
+ operation requires 4-Bytes Addressing mode
+ (no need if functions are direct-4BA) */
+ else if(((read_it || verify_it)
+ && (!(flash->chip->feature_bits & FEATURE_4BA_DIRECT_READ)))
+ || ((erase_it || write_it)
+ && ((flash->chip->feature_bits & FEATURE_4BA_ALL_DIRECT) != FEATURE_4BA_ALL_DIRECT))) {
+
if (!flash->chip->four_bytes_addr_funcs.enter_4ba) {
msg_cerr("No function for Enter 4-bytes addressing mode for this flash chip.\n"
"Please report to flashrom@flashrom.org\n");
@@ -2026,6 +2032,11 @@ int doit(struct flashctx *flash, int force, const char *filename, int read_it,
msg_cdbg("Switched to 4-bytes addressing mode.\n");
}
+ /* Do not switch to 4-Bytes Addressing mode if all instructions are direct-4BA
+ or if the flash chip is 4-Bytes Addressing Only and always in 4BA-mode */
+ else {
+ msg_cdbg2("No need to switch to 4-bytes addressing mode.\n");
+ }
}
if (read_it) {
diff --git a/spi4ba.c b/spi4ba.c
index db31cd2..6e1cc9b 100644
--- a/spi4ba.c
+++ b/spi4ba.c
@@ -653,3 +653,268 @@ int spi_block_erase_d8_4ba_ereg(struct flashctx *flash, unsigned int addr,
/* FIXME: Check the status register for errors. */
return 0;
}
+
+/* Program one flash byte with 4-bytes address from ANY mode (3-bytes or 4-bytes)
+ JEDEC_BYTE_PROGRAM_4BA (12h) instruction is new for 4-bytes addressing flash chips.
+ The presence of this instruction for an exact chip should be checked
+ by its datasheet or from SFDP 4-Bytes Address Instruction Table (JESD216B). */
+int spi_byte_program_4ba_direct(struct flashctx *flash, unsigned int addr,
+ uint8_t databyte)
+{
+ int result;
+ struct spi_command cmds[] = {
+ {
+ .writecnt = JEDEC_WREN_OUTSIZE,
+ .writearr = (const unsigned char[]){ JEDEC_WREN },
+ .readcnt = 0,
+ .readarr = NULL,
+ }, {
+ .writecnt = JEDEC_BYTE_PROGRAM_4BA_OUTSIZE,
+ .writearr = (const unsigned char[]){
+ JEDEC_BYTE_PROGRAM_4BA,
+ (addr >> 24) & 0xff,
+ (addr >> 16) & 0xff,
+ (addr >> 8) & 0xff,
+ (addr & 0xff),
+ databyte
+ },
+ .readcnt = 0,
+ .readarr = NULL,
+ }, {
+ .writecnt = 0,
+ .writearr = NULL,
+ .readcnt = 0,
+ .readarr = NULL,
+ }};
+
+ msg_trace("-> %s (0x%08X)\n", __func__, addr);
+
+ result = spi_send_multicommand(flash, cmds);
+ if (result) {
+ msg_cerr("%s failed during command execution at address 0x%x\n",
+ __func__, addr);
+ }
+ return result;
+}
+
+/* Program flash bytes with 4-bytes address from ANY mode (3-bytes or 4-bytes)
+ JEDEC_BYTE_PROGRAM_4BA (12h) instruction is new for 4-bytes addressing flash chips.
+ The presence of this instruction for an exact chip should be checked
+ by its datasheet or from SFDP 4-Bytes Address Instruction Table (JESD216B). */
+int spi_nbyte_program_4ba_direct(struct flashctx *flash, unsigned int addr,
+ const uint8_t *bytes, unsigned int len)
+{
+ int result;
+ unsigned char cmd[JEDEC_BYTE_PROGRAM_4BA_OUTSIZE - 1 + 256] = {
+ JEDEC_BYTE_PROGRAM_4BA,
+ (addr >> 24) & 0xff,
+ (addr >> 16) & 0xff,
+ (addr >> 8) & 0xff,
+ (addr >> 0) & 0xff
+ };
+ struct spi_command cmds[] = {
+ {
+ .writecnt = JEDEC_WREN_OUTSIZE,
+ .writearr = (const unsigned char[]){ JEDEC_WREN },
+ .readcnt = 0,
+ .readarr = NULL,
+ }, {
+ .writecnt = JEDEC_BYTE_PROGRAM_4BA_OUTSIZE - 1 + len,
+ .writearr = cmd,
+ .readcnt = 0,
+ .readarr = NULL,
+ }, {
+ .writecnt = 0,
+ .writearr = NULL,
+ .readcnt = 0,
+ .readarr = NULL,
+ }};
+
+ msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + len - 1);
+
+ if (!len) {
+ msg_cerr("%s called for zero-length write\n", __func__);
+ return 1;
+ }
+ if (len > 256) {
+ msg_cerr("%s called for too long a write\n", __func__);
+ return 1;
+ }
+
+ memcpy(&cmd[JEDEC_BYTE_PROGRAM_4BA_OUTSIZE - 1], bytes, len);
+
+ result = spi_send_multicommand(flash, cmds);
+ if (result) {
+ msg_cerr("%s failed during command execution at address 0x%x\n",
+ __func__, addr);
+ }
+ return result;
+}
+
+/* Read flash bytes with 4-bytes address from ANY mode (3-bytes or 4-bytes)
+ JEDEC_READ_4BA (13h) instruction is new for 4-bytes addressing flash chips.
+ The presence of this instruction for an exact chip should be checked
+ by its datasheet or from SFDP 4-Bytes Address Instruction Table (JESD216B). */
+int spi_nbyte_read_4ba_direct(struct flashctx *flash, unsigned int addr,
+ uint8_t *bytes, unsigned int len)
+{
+ const unsigned char cmd[JEDEC_READ_4BA_OUTSIZE] = {
+ JEDEC_READ_4BA,
+ (addr >> 24) & 0xff,
+ (addr >> 16) & 0xff,
+ (addr >> 8) & 0xff,
+ (addr >> 0) & 0xff
+ };
+
+ msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + len - 1);
+
+ /* Send Read */
+ return spi_send_command(flash, sizeof(cmd), len, cmd, bytes);
+}
+
+/* Erase 4 KB of flash with 4-bytes address from ANY mode (3-bytes or 4-bytes)
+ JEDEC_SE_4BA (21h) instruction is new for 4-bytes addressing flash chips.
+ The presence of this instruction for an exact chip should be checked
+ by its datasheet or from SFDP 4-Bytes Address Instruction Table (JESD216B). */
+int spi_block_erase_21_4ba_direct(struct flashctx *flash, unsigned int addr,
+ unsigned int blocklen)
+{
+ int result;
+ struct spi_command cmds[] = {
+ {
+ .writecnt = JEDEC_WREN_OUTSIZE,
+ .writearr = (const unsigned char[]){ JEDEC_WREN },
+ .readcnt = 0,
+ .readarr = NULL,
+ }, {
+ .writecnt = JEDEC_SE_4BA_OUTSIZE,
+ .writearr = (const unsigned char[]){
+ JEDEC_SE_4BA,
+ (addr >> 24) & 0xff,
+ (addr >> 16) & 0xff,
+ (addr >> 8) & 0xff,
+ (addr & 0xff)
+ },
+ .readcnt = 0,
+ .readarr = NULL,
+ }, {
+ .writecnt = 0,
+ .writearr = NULL,
+ .readcnt = 0,
+ .readarr = NULL,
+ }};
+
+ msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + blocklen - 1);
+
+ result = spi_send_multicommand(flash, cmds);
+ if (result) {
+ msg_cerr("%s failed during command execution at address 0x%x\n",
+ __func__, addr);
+ return result;
+ }
+ /* Wait until the Write-In-Progress bit is cleared.
+ * This usually takes 15-800 ms, so wait in 10 ms steps.
+ */
+ while (spi_read_status_register(flash) & SPI_SR_WIP)
+ programmer_delay(10 * 1000);
+ /* FIXME: Check the status register for errors. */
+ return 0;
+}
+
+/* Erase 32 KB of flash with 4-bytes address from ANY mode (3-bytes or 4-bytes)
+ JEDEC_BE_5C_4BA (5Ch) instruction is new for 4-bytes addressing flash chips.
+ The presence of this instruction for an exact chip should be checked
+ by its datasheet or from SFDP 4-Bytes Address Instruction Table (JESD216B). */
+int spi_block_erase_5c_4ba_direct(struct flashctx *flash, unsigned int addr,
+ unsigned int blocklen)
+{
+ int result;
+ struct spi_command cmds[] = {
+ {
+ .writecnt = JEDEC_WREN_OUTSIZE,
+ .writearr = (const unsigned char[]){ JEDEC_WREN },
+ .readcnt = 0,
+ .readarr = NULL,
+ }, {
+ .writecnt = JEDEC_BE_5C_4BA_OUTSIZE,
+ .writearr = (const unsigned char[]){
+ JEDEC_BE_5C_4BA,
+ (addr >> 24) & 0xff,
+ (addr >> 16) & 0xff,
+ (addr >> 8) & 0xff,
+ (addr & 0xff)
+ },
+ .readcnt = 0,
+ .readarr = NULL,
+ }, {
+ .writecnt = 0,
+ .writearr = NULL,
+ .readcnt = 0,
+ .readarr = NULL,
+ }};
+
+ msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + blocklen - 1);
+
+ result = spi_send_multicommand(flash, cmds);
+ if (result) {
+ msg_cerr("%s failed during command execution at address 0x%x\n",
+ __func__, addr);
+ return result;
+ }
+ /* Wait until the Write-In-Progress bit is cleared.
+ * This usually takes 100-4000 ms, so wait in 100 ms steps.
+ */
+ while (spi_read_status_register(flash) & SPI_SR_WIP)
+ programmer_delay(100 * 1000);
+ /* FIXME: Check the status register for errors. */
+ return 0;
+}
+
+/* Erase 64 KB of flash with 4-bytes address from ANY mode (3-bytes or 4-bytes)
+ JEDEC_BE_DC_4BA (DCh) instruction is new for 4-bytes addressing flash chips.
+ The presence of this instruction for an exact chip should be checked
+ by its datasheet or from SFDP 4-Bytes Address Instruction Table (JESD216B). */
+int spi_block_erase_dc_4ba_direct(struct flashctx *flash, unsigned int addr,
+ unsigned int blocklen)
+{
+ int result;
+ struct spi_command cmds[] = {
+ {
+ .writecnt = JEDEC_WREN_OUTSIZE,
+ .writearr = (const unsigned char[]){ JEDEC_WREN },
+ .readcnt = 0,
+ .readarr = NULL,
+ }, {
+ .writecnt = JEDEC_BE_DC_4BA_OUTSIZE,
+ .writearr = (const unsigned char[]){
+ JEDEC_BE_DC_4BA,
+ (addr >> 24) & 0xff,
+ (addr >> 16) & 0xff,
+ (addr >> 8) & 0xff,
+ (addr & 0xff)
+ },
+ .readcnt = 0,
+ .readarr = NULL,
+ }, {
+ .writecnt = 0,
+ .writearr = NULL,
+ .readcnt = 0,
+ .readarr = NULL,
+ }};
+
+ msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + blocklen - 1);
+
+ result = spi_send_multicommand(flash, cmds);
+ if (result) {
+ msg_cerr("%s failed during command execution at address 0x%x\n",
+ __func__, addr);
+ return result;
+ }
+ /* Wait until the Write-In-Progress bit is cleared.
+ * This usually takes 100-4000 ms, so wait in 100 ms steps.
+ */
+ while (spi_read_status_register(flash) & SPI_SR_WIP)
+ programmer_delay(100 * 1000);
+ /* FIXME: Check the status register for errors. */
+ return 0;
+}
diff --git a/spi4ba.h b/spi4ba.h
index f2e7bc5..8e500d1 100644
--- a/spi4ba.h
+++ b/spi4ba.h
@@ -46,6 +46,36 @@
#define JEDEC_READ_EXT_ADDR_REG_OUTSIZE 0x01
#define JEDEC_READ_EXT_ADDR_REG_INSIZE 0x01
+/* Read the memory with 4-byte address
+ From ANY mode (3-bytes or 4-bytes) it works with 4-byte address */
+#define JEDEC_READ_4BA 0x13
+#define JEDEC_READ_4BA_OUTSIZE 0x05
+/* JEDEC_READ_4BA_INSIZE : any length */
+
+/* Write memory byte with 4-byte address
+ From ANY mode (3-bytes or 4-bytes) it works with 4-byte address */
+#define JEDEC_BYTE_PROGRAM_4BA 0x12
+#define JEDEC_BYTE_PROGRAM_4BA_OUTSIZE 0x06
+#define JEDEC_BYTE_PROGRAM_4BA_INSIZE 0x00
+
+/* Sector Erase 0x21 (with 4-byte address), usually 4k size.
+ From ANY mode (3-bytes or 4-bytes) it works with 4-byte address */
+#define JEDEC_SE_4BA 0x21
+#define JEDEC_SE_4BA_OUTSIZE 0x05
+#define JEDEC_SE_4BA_INSIZE 0x00
+
+/* Block Erase 0x5C (with 4-byte address), usually 32k size.
+ From ANY mode (3-bytes or 4-bytes) it works with 4-byte address */
+#define JEDEC_BE_5C_4BA 0x5C
+#define JEDEC_BE_5C_4BA_OUTSIZE 0x05
+#define JEDEC_BE_5C_4BA_INSIZE 0x00
+
+/* Block Erase 0xDC (with 4-byte address), usually 64k size.
+ From ANY mode (3-bytes or 4-bytes) it works with 4-byte address */
+#define JEDEC_BE_DC_4BA 0xdc
+#define JEDEC_BE_DC_4BA_OUTSIZE 0x05
+#define JEDEC_BE_DC_4BA_INSIZE 0x00
+
/* enter 4-bytes addressing mode */
int spi_enter_4ba_b7(struct flashctx *flash);
int spi_enter_4ba_b7_we(struct flashctx *flash);
@@ -70,5 +100,15 @@ int spi_block_erase_20_4ba_ereg(struct flashctx *flash, unsigned int addr, unsig
int spi_block_erase_52_4ba_ereg(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
int spi_block_erase_d8_4ba_ereg(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
+/* read/write flash bytes with 4-bytes address from any mode (3-byte or 4-byte) */
+int spi_byte_program_4ba_direct(struct flashctx *flash, unsigned int addr, uint8_t databyte);
+int spi_nbyte_program_4ba_direct(struct flashctx *flash, unsigned int addr, const uint8_t *bytes, unsigned int len);
+int spi_nbyte_read_4ba_direct(struct flashctx *flash, unsigned int addr, uint8_t *bytes, unsigned int len);
+
+/* erase flash bytes with 4-bytes address from any mode (3-byte or 4-byte) */
+int spi_block_erase_21_4ba_direct(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
+int spi_block_erase_5c_4ba_direct(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
+int spi_block_erase_dc_4ba_direct(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
+
#endif /* __SPI_4BA_H__ */
OpenPOWER on IntegriCloud