summaryrefslogtreecommitdiffstats
path: root/spi4ba.c
diff options
context:
space:
mode:
Diffstat (limited to 'spi4ba.c')
-rw-r--r--spi4ba.c265
1 files changed, 265 insertions, 0 deletions
diff --git a/spi4ba.c b/spi4ba.c
index db31cd2..6e1cc9b 100644
--- a/spi4ba.c
+++ b/spi4ba.c
@@ -653,3 +653,268 @@ int spi_block_erase_d8_4ba_ereg(struct flashctx *flash, unsigned int addr,
/* FIXME: Check the status register for errors. */
return 0;
}
+
+/* Program one flash byte with 4-bytes address from ANY mode (3-bytes or 4-bytes)
+ JEDEC_BYTE_PROGRAM_4BA (12h) instruction is new for 4-bytes addressing flash chips.
+ The presence of this instruction for an exact chip should be checked
+ by its datasheet or from SFDP 4-Bytes Address Instruction Table (JESD216B). */
+int spi_byte_program_4ba_direct(struct flashctx *flash, unsigned int addr,
+ uint8_t databyte)
+{
+ int result;
+ struct spi_command cmds[] = {
+ {
+ .writecnt = JEDEC_WREN_OUTSIZE,
+ .writearr = (const unsigned char[]){ JEDEC_WREN },
+ .readcnt = 0,
+ .readarr = NULL,
+ }, {
+ .writecnt = JEDEC_BYTE_PROGRAM_4BA_OUTSIZE,
+ .writearr = (const unsigned char[]){
+ JEDEC_BYTE_PROGRAM_4BA,
+ (addr >> 24) & 0xff,
+ (addr >> 16) & 0xff,
+ (addr >> 8) & 0xff,
+ (addr & 0xff),
+ databyte
+ },
+ .readcnt = 0,
+ .readarr = NULL,
+ }, {
+ .writecnt = 0,
+ .writearr = NULL,
+ .readcnt = 0,
+ .readarr = NULL,
+ }};
+
+ msg_trace("-> %s (0x%08X)\n", __func__, addr);
+
+ result = spi_send_multicommand(flash, cmds);
+ if (result) {
+ msg_cerr("%s failed during command execution at address 0x%x\n",
+ __func__, addr);
+ }
+ return result;
+}
+
+/* Program flash bytes with 4-bytes address from ANY mode (3-bytes or 4-bytes)
+ JEDEC_BYTE_PROGRAM_4BA (12h) instruction is new for 4-bytes addressing flash chips.
+ The presence of this instruction for an exact chip should be checked
+ by its datasheet or from SFDP 4-Bytes Address Instruction Table (JESD216B). */
+int spi_nbyte_program_4ba_direct(struct flashctx *flash, unsigned int addr,
+ const uint8_t *bytes, unsigned int len)
+{
+ int result;
+ unsigned char cmd[JEDEC_BYTE_PROGRAM_4BA_OUTSIZE - 1 + 256] = {
+ JEDEC_BYTE_PROGRAM_4BA,
+ (addr >> 24) & 0xff,
+ (addr >> 16) & 0xff,
+ (addr >> 8) & 0xff,
+ (addr >> 0) & 0xff
+ };
+ struct spi_command cmds[] = {
+ {
+ .writecnt = JEDEC_WREN_OUTSIZE,
+ .writearr = (const unsigned char[]){ JEDEC_WREN },
+ .readcnt = 0,
+ .readarr = NULL,
+ }, {
+ .writecnt = JEDEC_BYTE_PROGRAM_4BA_OUTSIZE - 1 + len,
+ .writearr = cmd,
+ .readcnt = 0,
+ .readarr = NULL,
+ }, {
+ .writecnt = 0,
+ .writearr = NULL,
+ .readcnt = 0,
+ .readarr = NULL,
+ }};
+
+ msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + len - 1);
+
+ if (!len) {
+ msg_cerr("%s called for zero-length write\n", __func__);
+ return 1;
+ }
+ if (len > 256) {
+ msg_cerr("%s called for too long a write\n", __func__);
+ return 1;
+ }
+
+ memcpy(&cmd[JEDEC_BYTE_PROGRAM_4BA_OUTSIZE - 1], bytes, len);
+
+ result = spi_send_multicommand(flash, cmds);
+ if (result) {
+ msg_cerr("%s failed during command execution at address 0x%x\n",
+ __func__, addr);
+ }
+ return result;
+}
+
+/* Read flash bytes with 4-bytes address from ANY mode (3-bytes or 4-bytes)
+ JEDEC_READ_4BA (13h) instruction is new for 4-bytes addressing flash chips.
+ The presence of this instruction for an exact chip should be checked
+ by its datasheet or from SFDP 4-Bytes Address Instruction Table (JESD216B). */
+int spi_nbyte_read_4ba_direct(struct flashctx *flash, unsigned int addr,
+ uint8_t *bytes, unsigned int len)
+{
+ const unsigned char cmd[JEDEC_READ_4BA_OUTSIZE] = {
+ JEDEC_READ_4BA,
+ (addr >> 24) & 0xff,
+ (addr >> 16) & 0xff,
+ (addr >> 8) & 0xff,
+ (addr >> 0) & 0xff
+ };
+
+ msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + len - 1);
+
+ /* Send Read */
+ return spi_send_command(flash, sizeof(cmd), len, cmd, bytes);
+}
+
+/* Erase 4 KB of flash with 4-bytes address from ANY mode (3-bytes or 4-bytes)
+ JEDEC_SE_4BA (21h) instruction is new for 4-bytes addressing flash chips.
+ The presence of this instruction for an exact chip should be checked
+ by its datasheet or from SFDP 4-Bytes Address Instruction Table (JESD216B). */
+int spi_block_erase_21_4ba_direct(struct flashctx *flash, unsigned int addr,
+ unsigned int blocklen)
+{
+ int result;
+ struct spi_command cmds[] = {
+ {
+ .writecnt = JEDEC_WREN_OUTSIZE,
+ .writearr = (const unsigned char[]){ JEDEC_WREN },
+ .readcnt = 0,
+ .readarr = NULL,
+ }, {
+ .writecnt = JEDEC_SE_4BA_OUTSIZE,
+ .writearr = (const unsigned char[]){
+ JEDEC_SE_4BA,
+ (addr >> 24) & 0xff,
+ (addr >> 16) & 0xff,
+ (addr >> 8) & 0xff,
+ (addr & 0xff)
+ },
+ .readcnt = 0,
+ .readarr = NULL,
+ }, {
+ .writecnt = 0,
+ .writearr = NULL,
+ .readcnt = 0,
+ .readarr = NULL,
+ }};
+
+ msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + blocklen - 1);
+
+ result = spi_send_multicommand(flash, cmds);
+ if (result) {
+ msg_cerr("%s failed during command execution at address 0x%x\n",
+ __func__, addr);
+ return result;
+ }
+ /* Wait until the Write-In-Progress bit is cleared.
+ * This usually takes 15-800 ms, so wait in 10 ms steps.
+ */
+ while (spi_read_status_register(flash) & SPI_SR_WIP)
+ programmer_delay(10 * 1000);
+ /* FIXME: Check the status register for errors. */
+ return 0;
+}
+
+/* Erase 32 KB of flash with 4-bytes address from ANY mode (3-bytes or 4-bytes)
+ JEDEC_BE_5C_4BA (5Ch) instruction is new for 4-bytes addressing flash chips.
+ The presence of this instruction for an exact chip should be checked
+ by its datasheet or from SFDP 4-Bytes Address Instruction Table (JESD216B). */
+int spi_block_erase_5c_4ba_direct(struct flashctx *flash, unsigned int addr,
+ unsigned int blocklen)
+{
+ int result;
+ struct spi_command cmds[] = {
+ {
+ .writecnt = JEDEC_WREN_OUTSIZE,
+ .writearr = (const unsigned char[]){ JEDEC_WREN },
+ .readcnt = 0,
+ .readarr = NULL,
+ }, {
+ .writecnt = JEDEC_BE_5C_4BA_OUTSIZE,
+ .writearr = (const unsigned char[]){
+ JEDEC_BE_5C_4BA,
+ (addr >> 24) & 0xff,
+ (addr >> 16) & 0xff,
+ (addr >> 8) & 0xff,
+ (addr & 0xff)
+ },
+ .readcnt = 0,
+ .readarr = NULL,
+ }, {
+ .writecnt = 0,
+ .writearr = NULL,
+ .readcnt = 0,
+ .readarr = NULL,
+ }};
+
+ msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + blocklen - 1);
+
+ result = spi_send_multicommand(flash, cmds);
+ if (result) {
+ msg_cerr("%s failed during command execution at address 0x%x\n",
+ __func__, addr);
+ return result;
+ }
+ /* Wait until the Write-In-Progress bit is cleared.
+ * This usually takes 100-4000 ms, so wait in 100 ms steps.
+ */
+ while (spi_read_status_register(flash) & SPI_SR_WIP)
+ programmer_delay(100 * 1000);
+ /* FIXME: Check the status register for errors. */
+ return 0;
+}
+
+/* Erase 64 KB of flash with 4-bytes address from ANY mode (3-bytes or 4-bytes)
+ JEDEC_BE_DC_4BA (DCh) instruction is new for 4-bytes addressing flash chips.
+ The presence of this instruction for an exact chip should be checked
+ by its datasheet or from SFDP 4-Bytes Address Instruction Table (JESD216B). */
+int spi_block_erase_dc_4ba_direct(struct flashctx *flash, unsigned int addr,
+ unsigned int blocklen)
+{
+ int result;
+ struct spi_command cmds[] = {
+ {
+ .writecnt = JEDEC_WREN_OUTSIZE,
+ .writearr = (const unsigned char[]){ JEDEC_WREN },
+ .readcnt = 0,
+ .readarr = NULL,
+ }, {
+ .writecnt = JEDEC_BE_DC_4BA_OUTSIZE,
+ .writearr = (const unsigned char[]){
+ JEDEC_BE_DC_4BA,
+ (addr >> 24) & 0xff,
+ (addr >> 16) & 0xff,
+ (addr >> 8) & 0xff,
+ (addr & 0xff)
+ },
+ .readcnt = 0,
+ .readarr = NULL,
+ }, {
+ .writecnt = 0,
+ .writearr = NULL,
+ .readcnt = 0,
+ .readarr = NULL,
+ }};
+
+ msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + blocklen - 1);
+
+ result = spi_send_multicommand(flash, cmds);
+ if (result) {
+ msg_cerr("%s failed during command execution at address 0x%x\n",
+ __func__, addr);
+ return result;
+ }
+ /* Wait until the Write-In-Progress bit is cleared.
+ * This usually takes 100-4000 ms, so wait in 100 ms steps.
+ */
+ while (spi_read_status_register(flash) & SPI_SR_WIP)
+ programmer_delay(100 * 1000);
+ /* FIXME: Check the status register for errors. */
+ return 0;
+}
OpenPOWER on IntegriCloud