diff options
Diffstat (limited to 'src/superio')
-rw-r--r-- | src/superio/winbond/w83627dhg/acpi/superio.asl | 196 |
1 files changed, 196 insertions, 0 deletions
diff --git a/src/superio/winbond/w83627dhg/acpi/superio.asl b/src/superio/winbond/w83627dhg/acpi/superio.asl new file mode 100644 index 0000000..417d6fe --- /dev/null +++ b/src/superio/winbond/w83627dhg/acpi/superio.asl @@ -0,0 +1,196 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Christoph Grenz <christophg+cb@grenz-bonn.de> + * Copyright (C) 2013 secunet Security Networks AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * Include this file into a mainboard's DSDT _SB device tree and it will + * expose the W83627DHG SuperIO and some of its functionality. + * + * It allows the change of IO ports, IRQs and DMA settings on logical + * devices, disabling and reenabling logical devices and controlling power + * saving mode on logical devices or the whole chip. + * + * LDN State + * 0x0 FDC Not implemented + * 0x1 PP Not implemented + * 0x2 UARTA Implemented, partially tested + * 0x3 UARTB UART only, partially tested + * 0x5 KBC Implemented, untested + * 0x6 SPI Not implemented + * 0x7 GPIO6 Not implemented + * 0x8 WDT0&PLED Not implemented + * 0x9 GPIO2-5 Not implemented + * 0xa ACPI Not implemented + * 0xb HWM Resources, PM only + * 0xc PECI&SST Not implemented + * + * Controllable through preprocessor defines: + * SUPERIO_DEV Device identifier for this SIO (e.g. SIO0) + * SUPERIO_PNP_BASE I/o address of the first PnP configuration register + * W83627DHG_SHOW_UARTA If defined, UARTA will be exposed. + * W83627DHG_SHOW_UARTB If defined, UARTB will be exposed. + * W83627DHG_SHOW_KBC If defined, the KBC will be exposed. + * W83627DHG_SHOW_PS2M If defined, PS/2 mouse support will be exposed. + * W83627DHG_SHOW_HWMON If defined, the hardware monitor will be exposed. + */ + +#undef SUPERIO_CHIP_NAME +#define SUPERIO_CHIP_NAME W83627DHG +#include <superio/acpi/pnp.asl> + +Device(SUPERIO_DEV) { + Name (_HID, EisaId("PNP0A05")) + Name (_STR, Unicode("Winbond W83627DHG Super I/O")) + Name (_UID, SUPERIO_UID(SUPERIO_DEV,)) + + /* Mutex for accesses to the configuration ports */ + Mutex(CRMX, 1) + + /* SuperIO configuration ports */ + OperationRegion (CREG, SystemIO, SUPERIO_PNP_BASE, 0x02) + Field (CREG, ByteAcc, NoLock, Preserve) + { + PNP_ADDR_REG, 8, + PNP_DATA_REG, 8 + } + IndexField (ADDR, DATA, ByteAcc, NoLock, Preserve) + { + Offset (0x07), + PNP_LOGICAL_DEVICE, 8, /* Logical device selector */ + + Offset (0x22), + FDPW, 1, /* FDC Power Down */ + , 2, + PRPW, 1, /* PRT Power Down */ + UAPW, 1, /* UART A Power Down */ + UBPW, 1, /* UART B Power Down */ + HWPW, 1, /* HWM Power Down */ + Offset (0x23), + IPD, 1, /* Immediate Chip Power Down */ + + Offset (0x30), + PNP_DEVICE_ACTIVE, 1, /* Logical device activation */ + + Offset (0x60), + PNP_IO0_HIGH_BYTE, 8, /* First I/O port base - high byte */ + PNP_IO0_LOW_BYTE, 8, /* First I/O port base - low byte */ + Offset (0x62), + PNP_IO1_HIGH_BYTE, 8, /* Second I/O port base - high byte */ + PNP_IO1_LOW_BYTE, 8, /* Second I/O port base - low byte */ + + Offset (0x70), + PNP_IRQ0, 8, /* First IRQ */ + Offset (0x72), + PNP_IRQ1, 8, /* Second IRQ */ + + Offset (0x74), + PNP_DMA0, 8, /* DMA */ + } + + Method (_CRS) + { + /* Announce the used i/o ports to the OS */ + Return (ResourceTemplate () { + IO (Decode16, SUPERIO_PNP_BASE, SUPERIO_PNP_BASE, 0x01, 0x02) + }) + } + + #undef PNP_ENTER_MAGIC_1ST + #undef PNP_ENTER_MAGIC_2ND + #undef PNP_ENTER_MAGIC_3RD + #undef PNP_EXIT_MAGIC_1ST + #define PNP_ENTER_MAGIC_1ST 0x87 + #define PNP_ENTER_MAGIC_2ND 0x87 + #define PNP_EXIT_MAGIC_1ST 0xaa + #include <superio/acpi/pnp_config.asl> + + /* PM: indicate IPD (Immediate Power Down) bit state as D0/D2 */ + Method (_PSC) { + ENTER_CONFIG_MODE (PNP_NO_LDN_CHANGE) + Store (IPD, Local0) + EXIT_CONFIG_MODE () + If (Local0) { Return (2) } + Else { Return (0) } + } + + /* PM: Switch to D0 by setting IPD low */ + Method (_PS0) { + ENTER_CONFIG_MODE (PNP_NO_LDN_CHANGE) + Store (Zero, IPD) + EXIT_CONFIG_MODE () + } + + /* PM: Switch to D2 by setting IPD high */ + Method (_PS2) { + ENTER_CONFIG_MODE (PNP_NO_LDN_CHANGE) + Store (One, IPD) + EXIT_CONFIG_MODE () + } + +#ifdef W83627DHG_SHOW_UARTA + #undef SUPERIO_UART_LDN + #undef SUPERIO_UART_DDN + #undef SUPERIO_UART_PM_REG + #undef SUPERIO_UART_PM_LDN + #define SUPERIO_UART_LDN 2 + #define SUPERIO_UART_PM_REG UAPW + #define SUPERIO_UART_PM_LDN PNP_NO_LDN_CHANGE + #include <superio/acpi/pnp_uart.asl> +#endif + +#ifdef W83627DHG_SHOW_UARTB + #undef SUPERIO_UART_LDN + #undef SUPERIO_UART_DDN + #undef SUPERIO_UART_PM_REG + #undef SUPERIO_UART_PM_LDN + #define SUPERIO_UART_LDN 3 + #define SUPERIO_UART_PM_REG UBPW + #define SUPERIO_UART_PM_LDN PNP_NO_LDN_CHANGE + #include <superio/acpi/pnp_uart.asl> +#endif + +#ifdef W83627DHG_SHOW_KBC + #undef SUPERIO_KBC_LDN + #undef SUPERIO_KBC_PS2M + #undef SUPERIO_KBC_PS2LDN + #define SUPERIO_KBC_LDN 5 +#ifdef W83627DHG_SHOW_PS2M + #define SUPERIO_KBC_PS2M 1 +#endif + #include <superio/acpi/pnp_kbc.asl> +#endif + +#ifdef W83627DHG_SHOW_HWMON + #undef SUPERIO_PNP_LDN + #undef SUPERIO_PNP_DDN + #undef SUPERIO_PNP_PM_REG + #undef SUPERIO_PNP_PM_LDN + #undef SUPERIO_PNP_IO0 + #undef SUPERIO_PNP_IO1 + #undef SUPERIO_PNP_IRQ0 + #undef SUPERIO_PNP_IRQ1 + #undef SUPERIO_PNP_DMA + #define SUPERIO_PNP_LDN 11 + #define SUPERIO_PNP_PM_REG HWPW + #define SUPERIO_PNP_PM_LDN PNP_NO_LDN_CHANGE + #define SUPERIO_PNP_IO0 0x08, 0x08 + #define SUPERIO_PNP_IRQ0 1 + #include <superio/acpi/pnp_generic.asl> +#endif +} |