summaryrefslogtreecommitdiffstats
path: root/src/cpu/amd
diff options
context:
space:
mode:
Diffstat (limited to 'src/cpu/amd')
-rw-r--r--src/cpu/amd/car/post_cache_as_ram.c4
-rw-r--r--src/cpu/amd/dualcore/amd_sibling.c4
-rw-r--r--src/cpu/amd/geode_gx2/cpubug.c6
-rw-r--r--src/cpu/amd/geode_gx2/cpureginit.c4
-rw-r--r--src/cpu/amd/geode_lx/cpubug.c2
-rw-r--r--src/cpu/amd/model_10xxx/defaults.h2
-rw-r--r--src/cpu/amd/model_10xxx/fidvid.c6
-rw-r--r--src/cpu/amd/model_10xxx/init_cpus.c2
-rw-r--r--src/cpu/amd/model_fxx/fidvid.c4
-rw-r--r--src/cpu/amd/model_fxx/model_fxx_init.c2
-rw-r--r--src/cpu/amd/model_fxx/powernow_acpi.c6
-rw-r--r--src/cpu/amd/mtrr/amd_mtrr.c4
-rw-r--r--src/cpu/amd/quadcore/amd_sibling.c4
13 files changed, 25 insertions, 25 deletions
diff --git a/src/cpu/amd/car/post_cache_as_ram.c b/src/cpu/amd/car/post_cache_as_ram.c
index 68e7c09..18c278e 100644
--- a/src/cpu/amd/car/post_cache_as_ram.c
+++ b/src/cpu/amd/car/post_cache_as_ram.c
@@ -88,7 +88,7 @@ static void post_cache_as_ram(void)
#endif
#if 1
{
- /* Check value of esp to verify if we have enough rom for stack in Cache as RAM */
+ /* Check value of esp to verify if we have enough room for stack in Cache as RAM */
unsigned v_esp;
__asm__ volatile (
"movl %%esp, %0\n\t"
@@ -123,7 +123,7 @@ static void post_cache_as_ram(void)
/* set new esp */ /* before CONFIG_RAMBASE */
"subl %0, %%esp\n\t"
::"a"( (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE)- (CONFIG_RAMTOP) )
- /* discard all registers (eax is used for %0), so gcc redo everything
+ /* discard all registers (eax is used for %0), so gcc redoes everything
after the stack is moved */
: "cc", "memory", "%ebx", "%ecx", "%edx", "%esi", "%edi", "%ebp"
);
diff --git a/src/cpu/amd/dualcore/amd_sibling.c b/src/cpu/amd/dualcore/amd_sibling.c
index 13b9e37..b3df0a3 100644
--- a/src/cpu/amd/dualcore/amd_sibling.c
+++ b/src/cpu/amd/dualcore/amd_sibling.c
@@ -91,10 +91,10 @@ unsigned get_apicid_base(unsigned ioapic_num)
}
#endif
- //contruct apicid_base
+ //Construct apicid_base
if((!disable_siblings) && (siblings>0) ) {
- /* for 8 way dual core, we will used up apicid 16:16, actualy 16 is not allowed by current kernel
+ /* for 8 way dual core, we will used up apicid 16:16, actually 16 is not allowed by current kernel
and the kernel will try to get one that is small than 16 to make io apic work.
I don't know when the kernel can support 256 apic id. (APIC_EXT_ID is enabled) */
diff --git a/src/cpu/amd/geode_gx2/cpubug.c b/src/cpu/amd/geode_gx2/cpubug.c
index 54d7e0e..eddc924 100644
--- a/src/cpu/amd/geode_gx2/cpubug.c
+++ b/src/cpu/amd/geode_gx2/cpubug.c
@@ -163,7 +163,7 @@ static void eng2900(void)
* clocks when CPU is snooped. Because setting XSTATE to 0
* overrides any other XSTATE action, the code will always
* stall for 4 GeodeLink clocks after a snoop request goes
- * away even if it occured a clock or two later than a
+ * away even if it occurred a clock or two later than a
* different snoop; the stall signal will never 'glitch high'
* for only one or two CPU clocks with this code.
*/
@@ -201,7 +201,7 @@ static void eng2900(void)
msr.lo = 0x30000;
wrmsr(MSR_GLCP + 0x0073, msr);
- /* Writing action number 5: STALL_CPU_PIPE when exitting idle
+ /* Writing action number 5: STALL_CPU_PIPE when exiting idle
state or not in idle state */
msr.hi = 0;
msr.lo = 0x00430000;
@@ -293,7 +293,7 @@ static void bug118339(void)
*
* PBZ 3659:
* The MC reordered transactions incorrectly and breaks coherency.
- * Disable reording and take a potential performance hit.
+ * Disable reordering and take a potential performance hit.
* This is safe to do here and not in MC init since there is nothing
* to maintain coherency with and the cache is not enabled yet.
*/
diff --git a/src/cpu/amd/geode_gx2/cpureginit.c b/src/cpu/amd/geode_gx2/cpureginit.c
index 0fc852d..e0ecd62 100644
--- a/src/cpu/amd/geode_gx2/cpureginit.c
+++ b/src/cpu/amd/geode_gx2/cpureginit.c
@@ -15,7 +15,7 @@ void cpuRegInit (void)
/* Set up GLCP to grab BTM data. */
msrnum = GLCP_DBGOUT; /* GLCP_DBGOUT MSR */
msr.hi = 0x0;
- msr.lo = 0x08; /* reset value (SCOPE_SEL = 0) causes FIFO toshift out, */
+ msr.lo = 0x08; /* reset value (SCOPE_SEL = 0) causes FIFO to shift out, */
wrmsr(msrnum, msr); /* exchange it to anything else to prevent this */
/* Turn off debug clock */
@@ -119,7 +119,7 @@ void cpuRegInit (void)
wrmsr(msrnum, msr);
}
-/* FPU impercise exceptions bit */
+/* FPU imprecise exceptions bit */
{
msrnum = CPU_FPU_MSR_MODE;
msr = rdmsr(msrnum);
diff --git a/src/cpu/amd/geode_lx/cpubug.c b/src/cpu/amd/geode_lx/cpubug.c
index 4110454..ebadec7 100644
--- a/src/cpu/amd/geode_lx/cpubug.c
+++ b/src/cpu/amd/geode_lx/cpubug.c
@@ -67,7 +67,7 @@ static void pcideadlock(void)
/***/
/** PBZ 3659:*/
/** The MC reordered transactions incorrectly and breaks coherency.*/
-/** Disable reording and take a potential performance hit.*/
+/** Disable reordering and take a potential performance hit.*/
/** This is safe to do here and not in MC init since there is nothing*/
/** to maintain coherency with and the cache is not enabled yet.*/
/***/
diff --git a/src/cpu/amd/model_10xxx/defaults.h b/src/cpu/amd/model_10xxx/defaults.h
index f7b8b2f..3d33dda 100644
--- a/src/cpu/amd/model_10xxx/defaults.h
+++ b/src/cpu/amd/model_10xxx/defaults.h
@@ -54,7 +54,7 @@ static const struct {
{ DC_CFG, AMD_DR_Bx, AMD_PTYPE_SVR,
0x00000000, 0x00000000,
- 0x00000000, 0x00000C00 }, /* Errata 326 */
+ 0x00000000, 0x00000C00 }, /* Erratum 326 */
{ NB_CFG, AMD_FAM10_ALL, AMD_PTYPE_DC | AMD_PTYPE_MC,
0x00000000, 1 << 22,
diff --git a/src/cpu/amd/model_10xxx/fidvid.c b/src/cpu/amd/model_10xxx/fidvid.c
index ebe44dd..4297c90 100644
--- a/src/cpu/amd/model_10xxx/fidvid.c
+++ b/src/cpu/amd/model_10xxx/fidvid.c
@@ -68,7 +68,7 @@ Fam10 Bios and Kernel Development Guide #31116, rev 3.48, April 22, 2010
9.- TODO Requires information on current delivery capability
(depends on mainboard and maybe power supply ?). One might use a config
- option with the maximum number of Ampers that the board can deliver to CPU.
+ option with the maximum number of Amperes that the board can deliver to CPU.
10.- [Multiprocessor] TODO 2.4.2.12
[Uniprocessor] FIXME ? We call setPStateMaxVal() in init_fidvid_stage2,
@@ -79,7 +79,7 @@ Fam10 Bios and Kernel Development Guide #31116, rev 3.48, April 22, 2010
11.- finalPstateChange() from init_fidvid_Stage2 (BKDG says just "may", anyway)
12.- generate ACPI for p-states. FIXME
- Needs more assesment. There's some kind of fixed support that
+ Needs more assessment. There's some kind of fixed support that
does not seem to depend on CPU revision or actual MSRC001_00[68:64]
as BKDG apparently requires.
http://www.coreboot.org/ACPI#CPU_Power_Management
@@ -935,7 +935,7 @@ static void fixPsNbVidAfterWR(u32 newNbVid, u8 NbVidUpdatedAll,u8 pviMode)
static void finalPstateChange(void)
{
- /* Enble P0 on all cores for best performance.
+ /* Enable P0 on all cores for best performance.
* Linux can slow them down later if need be.
* It is safe since they will be in C1 halt
* most of the time anyway.
diff --git a/src/cpu/amd/model_10xxx/init_cpus.c b/src/cpu/amd/model_10xxx/init_cpus.c
index 3d5ddcf..eb047b8 100644
--- a/src/cpu/amd/model_10xxx/init_cpus.c
+++ b/src/cpu/amd/model_10xxx/init_cpus.c
@@ -424,7 +424,7 @@ static void start_node(u8 node)
/**
* static void setup_remote_node(u32 node)
*
- * Copy the BSP Adress Map to each AP.
+ * Copy the BSP Address Map to each AP.
*/
static void setup_remote_node(u8 node)
{
diff --git a/src/cpu/amd/model_fxx/fidvid.c b/src/cpu/amd/model_fxx/fidvid.c
index 06ff636..e68611b 100644
--- a/src/cpu/amd/model_fxx/fidvid.c
+++ b/src/cpu/amd/model_fxx/fidvid.c
@@ -496,7 +496,7 @@ static void init_fidvid_bsp_stage2(unsigned ap_apicid, void *gp)
continue;
if ((readback & 0xff) == 2) {
timeout = 0;
- break; /* target ap is stage 2, it's FID has beed set */
+ break; /* target ap is stage 2, its FID has been set */
}
}
@@ -603,7 +603,7 @@ static void init_fidvid_bsp(unsigned bsp_apicid)
/* For all APs ( We know the APIC ID of all AP even the APIC ID is lifted)
* send signal to the AP it could change it's fid/vid */
- /* remote read singnal from AP that AP is done */
+ /* remote read signal from AP that AP is done */
fv.common_fidvid &= 0xffff00;
diff --git a/src/cpu/amd/model_fxx/model_fxx_init.c b/src/cpu/amd/model_fxx/model_fxx_init.c
index a18b982..42c6f95 100644
--- a/src/cpu/amd/model_fxx/model_fxx_init.c
+++ b/src/cpu/amd/model_fxx/model_fxx_init.c
@@ -509,7 +509,7 @@ static void model_fxx_init(device_t dev)
id = get_node_core_id(read_nb_cfg_54()); // pre e0 nb_cfg_54 can not be set
- /* Is this a bad location? In particular can another node prefecth
+ /* Is this a bad location? In particular can another node prefetch
* data from this node before we have initialized it?
*/
if (id.coreid == 0)
diff --git a/src/cpu/amd/model_fxx/powernow_acpi.c b/src/cpu/amd/model_fxx/powernow_acpi.c
index 820d426..af1e24b 100644
--- a/src/cpu/amd/model_fxx/powernow_acpi.c
+++ b/src/cpu/amd/model_fxx/powernow_acpi.c
@@ -75,7 +75,7 @@ static int write_pstates_for_core(u8 pstate_num, u16 *pstate_feq, u8 *pstate_vid
#if CONFIG_K8_REV_F_SUPPORT
/*
-* Details about this algorithm , refert to BDKG 10.5.1
+* Details about this algorithm , refer to BDKG 10.5.1
* Two parts are included, the another is the DSDT reconstruction process
*/
@@ -202,7 +202,7 @@ static int pstates_algorithm(u32 pcontrol_blk, u8 plen, u8 onlyBSP)
goto write_pstates;
}
- /* Get the multipier of the fid frequency */
+ /* Get the multiplier of the fid frequency */
/*
* Fid multiplier is always 100 revF and revG.
*/
@@ -316,7 +316,7 @@ static int pstates_algorithm(u32 pcontrol_blk, u8 plen, u8 onlyBSP)
Pstate_num++;
}
- /* Constuct P[Min] State */
+ /* Construct P[Min] State */
if (Max_fid == 0x2A && Max_vid != 0x0) {
Pstate_fid[Pstate_num] = 0x2;
Pstate_feq[Pstate_num] =
diff --git a/src/cpu/amd/mtrr/amd_mtrr.c b/src/cpu/amd/mtrr/amd_mtrr.c
index 2f3e6e3..033ec53 100644
--- a/src/cpu/amd/mtrr/amd_mtrr.c
+++ b/src/cpu/amd/mtrr/amd_mtrr.c
@@ -128,10 +128,10 @@ void amd_setup_mtrrs(void)
}
/* Now that I have mapped what is memory and what is not
- * Setup the mtrrs so we can cache the memory.
+ * Set up the mtrrs so we can cache the memory.
*/
- // Rev. F K8 supports has SYSCFG_MSR_TOM2WB and dont need
+ // Rev. F K8 supports has SYSCFG_MSR_TOM2WB and doesn't need
// variable MTRR to span memory above 4GB
// Lower revisions K8 need variable MTRR over 4GB
x86_setup_var_mtrrs(address_bits, has_tom2wb ? 0 : 1);
diff --git a/src/cpu/amd/quadcore/amd_sibling.c b/src/cpu/amd/quadcore/amd_sibling.c
index e0d173d..d653a85 100644
--- a/src/cpu/amd/quadcore/amd_sibling.c
+++ b/src/cpu/amd/quadcore/amd_sibling.c
@@ -95,10 +95,10 @@ u32 get_apicid_base(u32 ioapic_num)
nb_cfg_54 = read_nb_cfg_54();
- //contruct apicid_base
+ //Construct apicid_base
if((!disable_siblings) && (siblings>0) ) {
- /* for 8 way dual core, we will used up apicid 16:16, actualy
+ /* for 8 way dual core, we will used up apicid 16:16, actually
16 is not allowed by current kernel and the kernel will try
to get one that is small than 16 to make io apic work. I don't
know when the kernel can support 256 apic id.
OpenPOWER on IntegriCloud