diff options
author | Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> | 2008-12-29 09:35:00 +0000 |
---|---|---|
committer | Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> | 2008-12-29 09:35:00 +0000 |
commit | 1d7db86b6baae440a01e8def0b6e7e97b4adea2a (patch) | |
tree | 280a648c50a7c1224e73131dcbeaea963418471a /src/southbridge | |
parent | 098d590d423a38fecaf8a4f1034b4f1710632ca0 (diff) | |
download | coreboot-staging-1d7db86b6baae440a01e8def0b6e7e97b4adea2a.zip coreboot-staging-1d7db86b6baae440a01e8def0b6e7e97b4adea2a.tar.gz |
The SB600 RPR documentation does not mention what to do if SATA_BAR0+6
is no longer 0xA0 or 0xB0. It simply assumes that will never happen.
My 500 GB Seagate Barracuda ST3500820AS triggers that corner case on the
first init after poweron.
The current code hangs forever with my drive. Fix this by rerunning the
init sequence after SATA_BAR0+6 is no longer 0xA0 or 0xB0.
Add support for SATA port 2-4 (Primary Slave, Secondary Master,
Secondary Slave).
If only the 2nd SATA port is connected and the hardware acts strangely
(contrary to documentation), it will print the error message below and
continue anyway. The official AMD asm code behaves the same way.
SATA port 0 status = 0
No Primary Master SATA drive on Slot0
SATA port 1 status = 23
0x6=7f, 0x7=7f
drive no longer selected after 0 ms, retrying init
[8 repetitions]
0x6=7f, 0x7=7f
drive no longer selected after 0 ms, retrying init
Primary Slave device is not ready after 10 tries
Activate and improve debug messages for SPEW log level.
Fix some comments.
New log messages look like this:
PCI: 00:12.0 init
sata_bar0=3020
sata_bar1=3060
sata_bar2=3030
sata_bar3=3070
sata_bar4=3000
sata_bar5=fc309000
SATA port 0 status = 23
0x6=a0, 0x7=80
drive detection not yet completed, waiting...
0x6=a0, 0x7=80
drive detection not yet completed, waiting...
[... 281 repetitions ...]
0x6=0, 0x7=50
drive no longer selected after 2820 ms, retrying init
drive detection done after 0 ms
Primary Master device is ready after 2 tries
SATA port 1 status = 23
drive detection done after 0 ms
Primary Slave device is ready after 1 tries
SATA port 2 status = 0
No Secondary Master SATA drive on Slot2
SATA port 3 status = 0
No Secondary Slave SATA drive on Slot3
With this patch, my Asus M2A-VM boots into Linux without problems.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Zheng Bao <zheng.bao@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3845 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/southbridge')
-rw-r--r-- | src/southbridge/amd/sb600/sb600_sata.c | 86 |
1 files changed, 60 insertions, 26 deletions
diff --git a/src/southbridge/amd/sb600/sb600_sata.c b/src/southbridge/amd/sb600/sb600_sata.c index 5b3c500..970af07 100644 --- a/src/southbridge/amd/sb600/sb600_sata.c +++ b/src/southbridge/amd/sb600/sb600_sata.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2008 Advanced Micro Devices, Inc. + * Copyright (C) 2008 Carl-Daniel Hailfinger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -26,6 +27,33 @@ #include <arch/io.h> #include "sb600.h" +int sata_drive_detect(int portnum, u16 iobar) +{ + u8 byte, byte2; + int i = 0; + outb(0xA0 + 0x10 * (portnum % 2), iobar + 0x6); + while (byte = inb(iobar + 0x6), byte2 = inb(iobar + 0x7), + (byte != (0xA0 + 0x10 * (portnum % 2))) || + ((byte2 & 0x88) != 0)) { + printk_spew("0x6=%x, 0x7=%x\n", byte, byte2); + if (byte != (0xA0 + 0x10 * (portnum % 2))) { + /* This will happen at the first iteration of this loop + * if the first SATA port is unpopulated and the + * second SATA port is poulated. + */ + printk_debug("drive no longer selected after %i ms, " + "retrying init\n", i * 10); + return 1; + } else + printk_spew("drive detection not yet completed, " + "waiting...\n"); + mdelay(10); + i++; + } + printk_spew("drive detection done after %i ms\n", i * 10); + return 0; +} + static void sata_init(struct device *dev) { u8 byte; @@ -33,6 +61,7 @@ static void sata_init(struct device *dev) u32 dword; u8 *sata_bar5; u16 sata_bar0, sata_bar1, sata_bar2, sata_bar3, sata_bar4; + int i, j; struct southbridge_ati_sb600_config *conf; conf = dev->chip_info; @@ -62,12 +91,12 @@ static void sata_init(struct device *dev) sata_bar3 = pci_read_config16(dev, 0x1C) & ~0x7; sata_bar4 = pci_read_config16(dev, 0x20) & ~0x7; - /* printk_debug("sata_bar0=%x\n", sata_bar0); */ /* 3030 */ - /* printk_debug("sata_bar1=%x\n", sata_bar1); */ /* 3070 */ - /* printk_debug("sata_bar2=%x\n", sata_bar2); */ /* 3040 */ - /* printk_debug("sata_bar3=%x\n", sata_bar3); */ /* 3080 */ - /* printk_debug("sata_bar4=%x\n", sata_bar4); */ /* 3000 */ - /* printk_debug("sata_bar5=%x\n", sata_bar5); */ /* e0309000 */ + printk_spew("sata_bar0=%x\n", sata_bar0); /* 3030 */ + printk_spew("sata_bar1=%x\n", sata_bar1); /* 3070 */ + printk_spew("sata_bar2=%x\n", sata_bar2); /* 3040 */ + printk_spew("sata_bar3=%x\n", sata_bar3); /* 3080 */ + printk_spew("sata_bar4=%x\n", sata_bar4); /* 3000 */ + printk_spew("sata_bar5=%x\n", sata_bar5); /* e0309000 */ /* Program the 2C to 0x43801002 */ dword = 0x43801002; @@ -131,31 +160,36 @@ static void sata_init(struct device *dev) dword |= 1 << 25; pci_write_config32(dev, 0x40, dword); - /* Enable the I/O ,MM ,BusMaster access for SATA */ + /* Enable the I/O, MM, BusMaster access for SATA */ byte = pci_read_config8(dev, 0x4); byte |= 7 << 0; pci_write_config8(dev, 0x4, byte); - /* RPR6.6 SATA drive detection. Currently we detect Primary Master Device only */ - /* Use BAR5+0x1A8,BAR0+0x6 for Primary Slave */ - /* Use BAR5+0x228,BAR0+0x6 for Secondary Master */ - /* Use BAR5+0x2A8,BAR0+0x6 for Secondary Slave */ - - byte = readb(sata_bar5 + 0x128); - /* printk_debug("byte=%x\n", byte); */ - byte &= 0xF; - if (byte == 0x3) { - outb(0xA0, sata_bar0 + 0x6); - while ((inb(sata_bar0 + 0x6) != 0xA0) - || ((inb(sata_bar0 + 0x7) & 0x88) != 0)) { - mdelay(10); - /* printk_debug("0x6=%x,0x7=%x\n", inb(sata_bar0 + 0x6), - inb(sata_bar0 + 0x7)); */ - printk_debug("drive detection fail,trying...\n"); + /* RPR6.6 SATA drive detection. */ + /* Use BAR5+0x128,BAR0 for Primary Slave */ + /* Use BAR5+0x1A8,BAR0 for Primary Slave */ + /* Use BAR5+0x228,BAR2 for Secondary Master */ + /* Use BAR5+0x2A8,BAR2 for Secondary Slave */ + + for (i = 0; i < 4; i++) { + byte = readb(sata_bar5 + 0x128 + 0x80 * i); + printk_spew("SATA port %i status = %x\n", i, byte); + byte &= 0xF; + if (byte == 0x3) { + for (j = 0; j < 10; j++) { + if (!sata_drive_detect(i, ((i / 2) == 0) ? sata_bar0 : sata_bar2)) + break; + } + printk_debug("%s %s device is %sready after %i tries\n", + (i / 2) ? "Secondary" : "Primary", + (i % 2 ) ? "Slave" : "Master", + (j == 10) ? "not " : "", + (j == 10) ? j : j + 1); + } else { + printk_debug("No %s %s SATA drive on Slot%i\n", + (i / 2) ? "Secondary" : "Primary", + (i % 2 ) ? "Slave" : "Master", i); } - printk_debug("Primary master device is ready\n"); - } else { - printk_debug("No Primary master SATA drive on Slot0\n"); } /* Below is CIM InitSataLateFar */ |