diff options
author | Elia Yehuda <z4ziggy@gmail.com> | 2008-11-21 17:14:40 +0000 |
---|---|---|
committer | Uwe Hermann <uwe@hermann-uwe.de> | 2008-11-21 17:14:40 +0000 |
commit | d24fe7e80ede60847afaa2ae30692b072ea06eda (patch) | |
tree | 51bf0082424ac42d16dda34739e2ea815348e639 /src/northbridge/intel | |
parent | 4cf5ecf39d58751cbddbbeb3133886acaecc9550 (diff) | |
download | coreboot-staging-d24fe7e80ede60847afaa2ae30692b072ea06eda.zip coreboot-staging-d24fe7e80ede60847afaa2ae30692b072ea06eda.tar.gz |
i810: Add support for multiple DIMMs, both single-sided and double-sided,
as well as most (all?) combinations thereof.
Drop some unused code, the unused row_offset variable, and obsolete comments.
Also, fix a typo (thanks to Stefan Reinauer for noticing).
This is tested on the MSI MS-6178 with a number of different DIMM
combinations and so far all of them worked fine.
Signed-off-by: Elia Yehuda <z4ziggy@gmail.com>
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3765 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/northbridge/intel')
-rw-r--r-- | src/northbridge/intel/i82810/raminit.c | 186 |
1 files changed, 103 insertions, 83 deletions
diff --git a/src/northbridge/intel/i82810/raminit.c b/src/northbridge/intel/i82810/raminit.c index ecfa7c3..0b3e965 100644 --- a/src/northbridge/intel/i82810/raminit.c +++ b/src/northbridge/intel/i82810/raminit.c @@ -1,8 +1,9 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de> + * Copyright (C) 2007-2008 Uwe Hermann <uwe@hermann-uwe.de> * Copyright (C) 2007 Corey Osgood <corey@slightlyhackish.com> + * Copyright (C) 2008 Elia Yehuda <z4ziggy@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -55,6 +56,22 @@ Macros and definitions. #define RAM_COMMAND_MRS 0x6 /* Mode register set */ #define RAM_COMMAND_CBR 0x7 /* CBR */ +/* + * Table which returns the RAM size in MB when fed the DRP[7:4] or [3:0] value. + * Note that 2 is a value which the DRP should never be programmed to. + * Some size values appear twice, due to single-sided vs dual-sided banks. + */ +static const u16 translate_i82810_to_mb[] = { +/* DRP 0 1 (2) 3 4 5 6 7 8 9 A B C D E F */ +/* MB */0, 8, 0, 16, 16, 24, 32, 32, 48, 64, 64, 96, 128, 128, 192, 256, +}; + +/* Size of bank#0 for dual-sided DIMMs */ +static const u8 translate_i82810_to_bank[] = { +/* DRP 0 1 (2) 3 4 5 6 7 8 9 A B C D E F */ +/* MB */0, 0, 0, 8, 0, 16, 16, 0, 32, 32, 0, 64, 64, 0, 128, 128, +}; + /*----------------------------------------------------------------------------- SDRAM configuration functions. -----------------------------------------------------------------------------*/ @@ -62,35 +79,87 @@ SDRAM configuration functions. /** * Send the specified RAM command to all DIMMs. * - * @param TODO - * @param TODO + * @param The RAM command to send to the DIMM(s). */ -static void do_ram_command(uint32_t command, uint32_t addr_offset, - uint32_t row_offset) +static void do_ram_command(u8 command) { - uint8_t reg; - - /* TODO: Support for multiple DIMMs. */ + u32 addr, addr_offset; + u16 dimm_size, dimm_start, dimm_bank; + u8 reg8, drp; + int i, caslatency; /* Configure the RAM command. */ - reg = pci_read_config8(PCI_DEV(0, 0, 0), DRAMT); - reg &= 0x1f; /* Clear bits 7-5. */ - reg |= command << 5; - pci_write_config8(PCI_DEV(0, 0, 0), DRAMT, reg); - - /* RAM_COMMAND_NORMAL affects only the memory controller and - doesn't need to be "sent" to the DIMMs. */ - /* if (command == RAM_COMMAND_NORMAL) return; */ - - PRINT_DEBUG(" Sending RAM command 0x"); - PRINT_DEBUG_HEX8(reg); - PRINT_DEBUG(" to 0x"); - PRINT_DEBUG_HEX32(0 + addr_offset); // FIXME - PRINT_DEBUG("\r\n"); - - /* Read from (DIMM start address + addr_offset). */ - read32(0 + addr_offset); //first offset is always 0 - read32(row_offset + addr_offset); + reg8 = pci_read_config8(PCI_DEV(0, 0, 0), DRAMT); + reg8 &= 0x1f; /* Clear bits 7-5. */ + reg8 |= command << 5; + pci_write_config8(PCI_DEV(0, 0, 0), DRAMT, reg8); + + /* + * RAM_COMMAND_NORMAL affects only the memory controller and + * doesn't need to be "sent" to the DIMMs. + */ + if (command == RAM_COMMAND_NORMAL) + return; + + dimm_start = 0; + for (i = 0; i < DIMM_SOCKETS; i++) { + /* + * Calculate the address offset where we need to "send" the + * DIMM command to. For most commands the offset is 0, only + * RAM_COMMAND_MRS needs special values, see below. + * The final address offset bits depend on three things: + * + * (1) Some hardcoded values specified in the datasheet. + * (2) Which CAS latency we will use/set. This is the SMAA[4] + * bit, which is 1 for CL3, and 0 for CL2. The bitstring + * so far has the form '00000001X1010', X being SMAA[4]. + * (3) The DIMM to which we want to send the command. For + * DIMM0 no special handling is needed, but for DIMM1 we + * must invert the four bits SMAA[7:4] (see datasheet). + * + * Finally, the bitstring has to be shifted 3 bits to the left. + * See i810 datasheet pages 43, 85, and 86 for details. + */ + addr_offset = 0; + caslatency = 3; /* TODO: Dynamically get CAS latency later. */ + if (i == 0 && command == RAM_COMMAND_MRS && caslatency == 3) + addr_offset = 0x1d0; /* DIMM0, CL3, 0000111010000 */ + if (i == 1 && command == RAM_COMMAND_MRS && caslatency == 3) + addr_offset = 0x650; /* DIMM1, CL3, 0011001010000 */ + if (i == 0 && command == RAM_COMMAND_MRS && caslatency == 2) + addr_offset = 0x150; /* DIMM0, CL2, 0000101010000 */ + if (i == 1 && command == RAM_COMMAND_MRS && caslatency == 2) + addr_offset = 0x1a0; /* DIMM1, CL2, 0000110100000 */ + + drp = pci_read_config8(PCI_DEV(0, 0, 0), DRP); + drp = (drp >> (i * 4)) & 0x0f; + + dimm_size = translate_i82810_to_mb[drp]; + addr = (dimm_start * 1024 * 1024) + addr_offset; + if (dimm_size) { + PRINT_DEBUG(" Sending RAM command 0x"); + PRINT_DEBUG_HEX8(reg8); + PRINT_DEBUG(" to 0x"); + PRINT_DEBUG_HEX32(addr); + PRINT_DEBUG("\r\n"); + + read32(addr); + } + + dimm_bank = translate_i82810_to_bank[drp]; + addr = ((dimm_start + dimm_bank) * 1024 * 1024) + addr_offset; + if (dimm_bank) { + PRINT_DEBUG(" Sending RAM command 0x"); + PRINT_DEBUG_HEX8(reg8); + PRINT_DEBUG(" to 0x"); + PRINT_DEBUG_HEX32(addr); + PRINT_DEBUG("\r\n"); + + read32(addr); + } + + dimm_start += dimm_size; + } } /*----------------------------------------------------------------------------- @@ -100,7 +169,7 @@ DIMM-independant configuration functions. /* * Set DRP - DRAM Row Population Register (Device 0). */ -static void spd_set_dram_size(uint32_t row_offset) +static void spd_set_dram_size(void) { /* The variables drp and dimm_size have to be ints since all the * SMBus-related functions return ints, and its just easier this way. @@ -137,36 +206,6 @@ static void spd_set_dram_size(uint32_t row_offset) dimm_size = 32; } - /* Set the row offset, in KBytes (should this be - * Kbits?). Note that this offset is the start of the - * next row. - */ - row_offset = (dimm_size * 4 * 1024); - - /* This is the way I was doing this, it's provided - * mainly as an alternative to the "new" way. - */ - -#if 0 - /* 8MB */ - if (dimm_size == 0x2) - dimm_size = 0x1; - /* 16MB */ - else if (dimm_size == 0x4) - dimm_size = 0x4; - /* 32MB */ - else if (dimm_size == 0x8) - dimm_size = 0x7; - /* 64 MB */ - else if (dimm_size == 0x10) - dimm_size = 0xa; - /* 128 MB */ - else if (dimm_size == 0x20) - dimm_size = 0xd; - else - print_debug("Ram Size not supported\r\n"); -#endif - /* This array is provided in raminit.h, because it got * extremely messy. The above way is cleaner, but * doesn't support any asymetrical/odd configurations. @@ -212,7 +251,7 @@ static void set_dram_timing(void) /* * TODO: BUFF_SC needs to be set according to the DRAM tech (x8, x16, - * or x32), but the datasheet doesn't list all the detaisl. Currently, it + * or x32), but the datasheet doesn't list all the details. Currently, it * needs to be pulled from the output of 'lspci -xxx Rx92'. * * Common results (tested on actual hardware) are: @@ -246,9 +285,6 @@ static void set_dram_buffer_strength(void) Public interface. -----------------------------------------------------------------------------*/ -/** - * TODO. - */ static void sdram_set_registers(void) { unsigned long val; @@ -292,16 +328,10 @@ static void sdram_set_registers(void) //pci_write_config8(PCI_DEV(0, 0, 0), MISSC2, val); } -/** - * TODO. - */ static void sdram_set_spd_registers(void) { - /* spd_set_dram_size() moved into sdram_enable() to prevent having - * to pass a variable between here and there. - */ + spd_set_dram_size(); set_dram_buffer_strength(); - set_dram_timing(); } @@ -312,41 +342,31 @@ static void sdram_enable(void) { int i; - /* Todo: this will currently work with either one dual sided or two - * single sided DIMMs. Needs to work with 2 dual sided DIMMs in the - * long run. - */ - uint32_t row_offset; - - spd_set_dram_size(row_offset); - /* 1. Apply NOP. */ PRINT_DEBUG("RAM Enable 1: Apply NOP\r\n"); - do_ram_command(RAM_COMMAND_NOP, 0, row_offset); + do_ram_command(RAM_COMMAND_NOP); udelay(200); /* 2. Precharge all. Wait tRP. */ PRINT_DEBUG("RAM Enable 2: Precharge all\r\n"); - do_ram_command(RAM_COMMAND_PRECHARGE, 0, row_offset); + do_ram_command(RAM_COMMAND_PRECHARGE); udelay(1); /* 3. Perform 8 refresh cycles. Wait tRC each time. */ PRINT_DEBUG("RAM Enable 3: CBR\r\n"); - do_ram_command(RAM_COMMAND_CBR, 0, row_offset); for (i = 0; i < 8; i++) { - read32(0); - read32(row_offset); + do_ram_command(RAM_COMMAND_CBR); udelay(1); } /* 4. Mode register set. Wait two memory cycles. */ PRINT_DEBUG("RAM Enable 4: Mode register set\r\n"); - do_ram_command(RAM_COMMAND_MRS, 0x1d0, row_offset); + do_ram_command(RAM_COMMAND_MRS); udelay(2); /* 5. Normal operation (enables refresh) */ PRINT_DEBUG("RAM Enable 5: Normal operation\r\n"); - do_ram_command(RAM_COMMAND_NORMAL, 0, row_offset); + do_ram_command(RAM_COMMAND_NORMAL); udelay(1); PRINT_DEBUG("Northbridge following SDRAM init:\r\n"); |