Add support for Intel Sandybridge CPU (northbridge part)

Change-Id: I06228ecf9cac931ad34e32871d5a4f2a4857b2ac
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/854
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>

1 files changed, 98 insertions, 0 deletions

diff --git a/src/northbridge/intel/sandybridge/pei_data.h b/src/northbridge/intel/sandybridge/pei_data.h
new file mode 100644
index 0000000..cda08b2
--- /dev/null
+++ b/src/northbridge/intel/sandybridge/pei_data.h
@@ -0,0 +1,98 @@
+/*
+ * coreboot UEFI PEI wrapper
+ *
+ * Copyright (c) 2011, Google Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Google Inc. nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL GOOGLE INC BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef PEI_DATA_H
+#define PEI_DATA_H
+
+#define PEI_VERSION 1
+struct pei_data
+{
+	uint32_t pei_version;
+	uint32_t mchbar;
+	uint32_t dmibar;
+	uint32_t epbar;
+	uint32_t pciexbar;
+	uint16_t smbusbar;
+	uint32_t wdbbar;
+	uint32_t wdbsize;
+	uint32_t hpet_address;
+	uint32_t rcba;
+	uint32_t pmbase;
+	uint32_t gpiobase;
+	uint32_t thermalbase;
+	uint32_t system_type; // 0 Mobile, 1 Desktop/Server
+	uint32_t tseg_size;
+	uint8_t spd_addresses[4];
+	uint8_t ts_addresses[4];
+	int boot_mode;
+	int ec_present;
+	// 0 = leave channel enabled
+	// 1 = disable dimm 0 on channel
+	// 2 = disable dimm 1 on channel
+	// 3 = disable dimm 0+1 on channel
+	int dimm_channel0_disabled;
+	int dimm_channel1_disabled;
+	/* Seed values saved in CMOS */
+	uint32_t scrambler_seed;
+	uint32_t scrambler_seed_s3;
+	/* Data read from flash and passed into MRC */
+	unsigned char *mrc_input;
+	unsigned int mrc_input_len;
+	/* Data from MRC that should be saved to flash */
+	unsigned char *mrc_output;
+	unsigned int mrc_output_len;
+	/*
+	 * Max frequency DDR3 could be ran at. Could be one of four values:
+	 * 800, 1067, 1333, 1600
+	 */
+	uint32_t max_ddr3_freq;
+	/*
+	 * USB Port Configuration:
+	 *  [0] = enable
+	 *  [1] = overcurrent pin
+	 *  [2] = length
+	 *
+	 * Port Length
+	 *  MOBILE:
+	 *   < 0x050 = Setting 1 (back panel, 1-5in, lowest tx amplitude)
+	 *   < 0x140 = Setting 2 (back panel, 5-14in, highest tx amplitude)
+	 *  DESKTOP:
+	 *   < 0x080 = Setting 1 (front/back panel, <8in, lowest tx amplitude)
+	 *   < 0x130 = Setting 2 (back panel, 8-13in, higher tx amplitude)
+	 *   < 0x150 = Setting 3 (back panel, 13-15in, higest tx amplitude)
+	 */
+	uint16_t usb_port_config[16][3];
+	/* SPD data array for onboard RAM. Specify address 0xf0,
+	 * 0xf1, 0xf2, 0xf3 to index one of the 4 slots in
+	 * spd_address for a given "DIMM".
+	 */
+	uint8_t spd_data[4][256];
+} __attribute__((packed));
+
+#endif