diff options
author | Ronald G. Minnich <rminnich@gmail.com> | 2004-09-30 22:50:13 +0000 |
---|---|---|
committer | Ronald G. Minnich <rminnich@gmail.com> | 2004-09-30 22:50:13 +0000 |
commit | ed9f18d545ffa6e4604eacbf1ce8c68913378ab8 (patch) | |
tree | 52e76e7243b59076c73592f94e29b57fe0610e07 /src/northbridge/intel/i855pm | |
parent | a4779e80c3e54e6e6c31169908803065b4ef68b2 (diff) | |
download | coreboot-staging-ed9f18d545ffa6e4604eacbf1ce8c68913378ab8.zip coreboot-staging-ed9f18d545ffa6e4604eacbf1ce8c68913378ab8.tar.gz |
mods for i855pm that don't seem too wrong. ha!
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1653 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/northbridge/intel/i855pm')
-rw-r--r-- | src/northbridge/intel/i855pm/raminit.c | 268 |
1 files changed, 123 insertions, 145 deletions
diff --git a/src/northbridge/intel/i855pm/raminit.c b/src/northbridge/intel/i855pm/raminit.c index cd103d5..b95bf48 100644 --- a/src/northbridge/intel/i855pm/raminit.c +++ b/src/northbridge/intel/i855pm/raminit.c @@ -2,6 +2,20 @@ /* This was originally for the e7500, modified for i855pm */ +/* the 855pm uses only + * memory type (must be ddr) + * number of row addresses, not counting bank addresses + * number of column addresses + * number of so-dimm banks + * ecc, no ecc + * refresh rate/type + * number banks on each device + * + * that's it. No other bytes are used. + * these are bytes + * 2, 3, 4, 5, 11, 12 17 + */ + /* converted to C 6/2004 yhlu */ #define DEBUG_RAM_CONFIG 1 @@ -152,7 +166,7 @@ static const long register_values[] = { * granularity. */ /* Conservatively say each row has 32MB of ram, we will fix this up later */ - 0x60, 0x00000000, (0x01 << 0) | (0x02 << 8) | (0x03 << 16) | (0x04 << 24), + 0x40, 0x00000000, (0x01 << 0) | (0x02 << 8) | (0x03 << 16) | (0x04 << 24), /* DRA - DRAM Row Attribute Register * 0x70 Row 0,1 * 0x71 Row 2,3 @@ -175,85 +189,68 @@ static const long register_values[] = { (((0<<3)|(0<<0))<<28), */ /* DRT - DRAM Time Register - * 0x78 - * [31:31] Additional CKE to CS Clock for Read/Write - * [30:30] Additional CKE to CS clock for Precharge/Activate - * [29:29] Back to Back Write-Read Turn Around - * Intel recommends set to 1 + * 0x60 + * [31:31] tWTR -- MBZ + * [30:30] tWR 0 is 2, 1 is 3 clocks + * [29:28] back to back write-read commands spacing + * different rows + * 00 4, 01 3, 10 2, 11 reserved * - * [28:28] Back to Back Read-Write Turn Around - * Intel recommends 0 for CL 2.5 and 1 for CL 2 + * [27:26] same or different + * CL + .5x BL + TA(RD-WR) - DQSS + * wow that's hard! + * 00 7, 01 6, 10 5, 11 4 + * 00 4, 01 3, 10 2, 11 reserved * - * [27:27] Back to Back Read Turn Around - * Intel recommends 1 for all configs - * - * [26:24] Read Delay (tRD) - * 000 == 9 clocks - * 001 == 8 clocks - * 010 == 7 clocks - * 011 == 6 clocks - * 100 == 5 clocks - * 101 == 4 clocks - * 110 == 3 clocks - * Others == Reserved - * [23:20] Reserved - * [19:19] No Wake for DDR page closes - * 0 is default - * [18:16] Page Close Counter - * 000 == infinite - * 010 == 8-15 clocks - * 011 == 16-31 clocks - * 100 == 64-127 clocks - * 101 == 128-255 clocks - * 110 == 192-383 clocks - * 111 == 255-510 clocks + * [25:25] Back to Back Read-read spacing + * .5xBL + TA(RD-RD) + * 0 4 , 1 3 + * + * [24:15] Reserved + * + * [14:12] Refresh cycle time + * 000 14, 001 13, 010 12, 011 11, 100 10, 101 9, 110 8, 111 7 * - * [15:12] Reserved - * [11:11] DQS Slave DLL Dynamic Management - * power saving, when set to 1, slave DLLS disabled - * we'll leave it at 0 for now + * [11:11] tRAS, max + * 0 120 us, 1 reserved + * * [10:09] Active to Precharge (tRAS) - * 00 == 7 clocks - * 01 == 6 clocks - * 10 == 5 clocks - * 11 == Reserved - * [08:06] Reserved - * [05:04] Cas Latency (tCL) + * 00 == 8 clocks + * 01 == 7 clocks + * 10 == 6 clocks + * 11 == 5 clocks + * [08:07] Reserved + * [06:05] Cas Latency (tCL) * 00 == 2.5 Clocks * 01 == 2.0 Clocks (default) - * 10 == 1.5 Clocks + * 10 == Reserved * 11 == Reserved - * [03:03] Reserved - * [02:02] Ras# to Cas# Delay (tRCD) - * 0 == 3 DRAM Clocks - * 1 == 2 DRAM Clocks - * [01:01] Reserved - * [00:00] DRAM RAS# to Precharge (tRP) - * 0 == 3 DRAM Clocks - * 1 == 2 DRAM Clocks + * [04:04] Reserved + * [03:02] Ras# to Cas# Delay (tRCD) + * 00 == 4 DRAM Clocks + * 01 == 3 DRAM Clocks + * 10 == 2 DRAM Clocks + * 11 == reserved + * [01:00] DRAM RAS# to Precharge (tRP) + * 00 == 4 DRAM Clocks + * 01 == 3 DRAM Clocks + * 10 == 2 DRAM Clocks + * 11 == reserved */ -#define DRT_CAS_2_5 (0<<4) -#define DRT_CAS_2_0 (1<<4) -#define DRT_CAS_1_5 (2<<4) -#define DRT_CAS_MASK (3<<4) +#define DRT_CAS_2_5 (0<<5) +#define DRT_CAS_2_0 (1<<5) +#define DRT_CAS_MASK (3<<5) #if CAS_LATENCY == CAS_2_5 #define DRT_CL DRT_CAS_2_5 #elif CAS_LATENCY == CAS_2_0 #define DRT_CL DRT_CAS_2_0 -#elif CAS_LATENCY == CAS_1_5 -#define DRT_CL DRT_CAS_1_5 #endif - /* Most unaggressive settings possible */ - /* clear bits 26:24,18:16,11,10:9,5:4,2:2,0 */ - /* ~ (7<<26)|(7<<18)|(1<<11)|(3<<10)|(3<<5)|(1<<2)|1 */ -// 0x78, 0xc0fff8c4, (1<<29)|(1<<28)|(1<<27)|(2<<24)|(2<<9)|DRT_CL|(1<<3)|(1<<1)|(1<<0), -// 0x78, 0xc0f8f8c0, (1<<29)|(1<<28)|(1<<27)|(1<<24)|(1<<16)|(2<<9)|DRT_CL|(1<<3)|(3<<1)|(1<<0), -// 0x78, 0xc0f8f9c0, (1<<29)|(1<<28)|(1<<27)|(1<<24)|(1<<16)|(2<<9)|DRT_CL|(1<<3)|(3<<1)|(1<<0), - 0x78, ~((7<<26)|(7<<18)|(1<<11)|(3<<10)|(3<<5)|(1<<2)|1), - (1<<29)|(1<<28)|(9<<26)|(0<<18)|(0<<11)|(0<<10)|(0<<5)|(0<<2)|(0<<0), + /* bios is 0x2a004425 */ + /* default hardware is 18004425 */ + /* no setting for now */ /* FDHC - Fixed DRAM Hole Control * 0x97 @@ -332,11 +329,7 @@ static const long register_values[] = { * [03:01] Reserved * [00:00] DRAM type --hardwired to 1 to indicate DDR */ -// .long 0x7c, 0xffcefcff, (1<<22)|(2 << 20)|(1 << 16)| (0 << 8), -// .long 0x7c, 0xff8cfcff, (1<<22)|(2 << 20)|(1 << 17)|(1 << 16)| (0 << 8), -// .long 0x7c, 0xff80fcff, (1<<22)|(2 << 20)|(1 << 18)|(1 << 17)|(1 << 16)| (0 << 8), -// 0x7c, 0xff82fcff, (1<<22)|(2 << 20)|(1 << 18)|(1 << 16)| (0 << 8), - 0x7c, 0xff82f8ff, (1<<22)|(2 << 20)|(1 << 18)|(1 << 16)| (0 << 8), + 0x70, 0xdf0f6c7f, 0, }; @@ -501,7 +494,7 @@ static void ram_set_d0f0_regs(const struct mem_controller *ctrl) { #endif } static void sdram_set_registers(const struct mem_controller *ctrl){ - ram_set_rcomp_regs(ctrl); + // ram_set_rcomp_regs(ctrl); ram_set_d0f0_regs(ctrl); } @@ -771,7 +764,7 @@ hw_err: */ static long spd_set_row_attributes(const struct mem_controller *ctrl, long dimm_mask) { int i; - uint32_t dword=0; + uint16_t word=0x7777; int value; @@ -803,14 +796,17 @@ static long spd_set_row_attributes(const struct mem_controller *ctrl, long dimm_ print_err("unsupported page size\r\n"); } - /* double because I have 2 channels */ - sz.side1++; - /* Convert to the format needed for the DRA register */ + /* subtract 3 (there are 8 bytes) + * then subtract 11 + * (since 12 bit size should map to a value of 1) + * so subtract 14 total + */ sz.side1-=14; /* Place in the %ebp the dra place holder */ //i - dword |= sz.side1<<(i<<3); + word &= ~(7<<i); + word |= sz.side1<<(i<<3); /* Test to see if the second side is present */ @@ -821,47 +817,20 @@ static long spd_set_row_attributes(const struct mem_controller *ctrl, long dimm_ print_err("unsupported page size\r\n"); } - /* double because I have 2 channels */ - sz.side2++; - /* Convert to the format needed for the DRA register */ sz.side2-=14; /* Place in the %ebp the dra place holder */ //i - dword |= sz.side2<<((i<<3) + 4 ); + word &= ~(7<<i); + word |= sz.side2<<((i<<3) + 4 ); } } - - /* Now add the SDRAM chip width to the DRA */ - struct dimm_width wd; - wd = sdram_spd_get_width(ctrl->channel0[i]); - -#if DEBUG_RAM_CONFIG - print_debug("width ="); - print_debug_hex32(wd.side1); - print_debug(" "); - print_debug_hex32(wd.side2); - print_debug("\r\n"); -#endif - - if(wd.side1 == 0) continue; - if(wd.side1 == 4) { - /* Enable an x4 device */ - dword |= 0x08 << (i<<3); - } - - if(wd.side2 == 0) continue; - if(wd.side2 == 4) { - /* Enable an x4 device */ - dword |= 0x08 << ((i<<3 ) + 4); - } - /* go to the next DIMM */ } /* Write the new row attributes register */ - pci_write_config32(ctrl->d0, 0x70, dword); + pci_write_config32(ctrl->d0, 0x50, word); return dimm_mask; @@ -1122,9 +1091,9 @@ static const uint32_t refresh_rate_index[] = { * 7.8us -> 7.8us * 31.3s -> 15.6us * 62.5us -> 15.6us - * 125us -> 64us + * 125us -> 15.6us */ - 1, 0xff, 2, 1, 1, 3 + 1, 0xff, 2, 1, 1, 1 }; #define MAX_SPD_REFRESH_RATE 5 @@ -1135,9 +1104,19 @@ static long spd_set_dram_controller_mode (const struct mem_controller *ctrl, lon int value; uint32_t ecx; uint32_t edx; + /* on this chipset we only do refresh "slow" or "fast" for now */ + /* we start out assuming "slow" (15.6 microseconds) */ + uint32_t refrate = 1; /* better than 7.8 */ /* Read the inititial state */ - dword = pci_read_config32(ctrl->d0, 0x7c); + dword = pci_read_config32(ctrl->d0, 0x70); + // WTF? + //dword |= 0x10000; +#if 0 // DEBUG_RAM_CONFIG + print_debug("spd_detect_dimms: 0x70.l is:"); + print_debug_hex32(dword); + print_debug("\r\n"); +#endif #if 0 /* Test if ECC cmos option is enabled */ @@ -1165,8 +1144,17 @@ static long spd_set_dram_controller_mode (const struct mem_controller *ctrl, lon value = spd_read_byte(ctrl->channel0[i], 11); /* SDRAM type */ if(value < 0) continue; if(value !=2 ) { +#if DEBUG_RAM_CONFIG + print_debug("spd_detect_dimms:\r\n"); +#endif /* Clear the ecc enable */ dword &= ~(3 << 20); +#if 0 &&DEBUG_RAM_CONFIG + print_debug("spd_detect_dimms: no ecc so set:"); + print_debug_hex32(dword); + print_debug("\r\n"); +#endif + } value = spd_read_byte(ctrl->channel0[i], 12); /* SDRAM refresh rate */ if(value < 0 ) continue; @@ -1174,34 +1162,36 @@ static long spd_set_dram_controller_mode (const struct mem_controller *ctrl, lon if(value > MAX_SPD_REFRESH_RATE) { print_err("unsupported refresh rate\r\n");} // if(value == 0xff) { print_err("unsupported refresh rate\r\n");} - ecx = refresh_rate_index[value]; - - /* Isolate the old refresh rate setting */ - /* Load the refresh rate ranks */ - edx = refresh_rate_rank[(dword >> 8) & 3]<<8; - edx |= refresh_rate_rank[ecx] & 0xff; - - /* See if the new refresh rate is more conservative than the old - * refresh rate setting. (Lower ranks are more conservative) - */ - if((edx & 0xff)< ((edx >> 8) & 0xff) ) { - /* Clear the old refresh rate */ - dword &= ~(3<<8); - /* Move in the new refresh rate */ - dword |= (ecx<<8); - } - +#if DEBUG_RAM_CONFIG + print_debug("spd_detect_dimms: ref rate index:"); + print_debug_hex8(value); + print_debug("\r\n"); +#endif + if (value == 2) /* have to go faster */ + refrate = 2; +#if 0 &&DEBUG_RAM_CONFIG + print_debug("spd_detect_dimms: dword is now w/refresh:"); + print_debug_hex32(dword); + print_debug("\r\n"); +#endif + /* no applicability here but there are similar things + * we'll try later. + */ +#if 0 value = spd_read_byte(ctrl->channel0[i], 33); /* Address and command hold time after clock */ if(value < 0) continue; if(value >= 0xa0) { /* At 133Mhz this constant should be 0x75 */ dword &= ~(1<<16); /* Use two clock cyles instead of one */ } +#endif /* go to the next DIMM */ } + /* set the refrate now */ + dword |= (refrate << 7); /* Now write the controller mode */ - pci_write_config32(ctrl->d0, 0x7c, dword); + pci_write_config32(ctrl->d0, 0x70, dword); return dimm_mask; @@ -1396,14 +1386,15 @@ static long spd_set_dram_timing(const struct mem_controller *ctrl, long dimm_mas int value; /* Read the inititial state */ - dword = pci_read_config32(ctrl->d0, 0x78); + dword = pci_read_config32(ctrl->d0, 0x60); #if 0 # Intel clears top bit here, should we? # No the default is on and for normal timming it should be on. Tom Z andl $0x7f, %esi #endif - + +HERE. WHat's the frequency kenneth? for(i = 0; i < DIMM_SOCKETS; i++) { if (!(dimm_mask & (1 << i))) { continue; @@ -1485,7 +1476,7 @@ static long spd_set_dram_timing(const struct mem_controller *ctrl, long dimm_mas dword |= (1<<29); } - pci_write_config32(ctrl->d0, 0x78, dword); + pci_write_config32(ctrl->d0, 0x60, dword); return dimm_mask; @@ -1512,23 +1503,7 @@ static unsigned int spd_detect_dimms(const struct mem_controller *ctrl) dimm_mask |= (1 << i); } } -#if 0 - device = ctrl->channel1[i]; - if (device) { - byte = spd_read_byte(ctrl->channel1[i], 2); - if (byte == 7) { - dimm_mask |= (1 << (i + DIMM_SOCKETS)); - } - } -#endif } -#if 1 - i = (dimm_mask>>DIMM_SOCKETS); - if(i != (dimm_mask & ( (1<<DIMM_SOCKETS) - 1) ) ) { - die("now we only support dual channel\r\n"); - } - -#endif return dimm_mask; } @@ -1661,12 +1636,15 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) { print_debug(spd_pre_set); #endif dimm_mask = spd_set_row_attributes(ctrl,dimm_mask); + if (dimm_mask < 0) goto hw_spd_err; dimm_mask = spd_set_dram_controller_mode(ctrl,dimm_mask); + if (dimm_mask < 0) goto hw_spd_err; dimm_mask = spd_set_cas_latency(ctrl,dimm_mask); + dump_pci_device(PCI_DEV(0,0,1)); if (dimm_mask < 0) goto hw_spd_err; dimm_mask = spd_set_dram_timing(ctrl,dimm_mask); |