Add initial support for the ASpeed 2050 and the ASUS KGPE-D16

Thermal management is functional but expects all fans to be attached

Known issues:
 * BMC has been observed spontaneously rebooting after ~7-8 hours uptime
   with no logs and no console output.
 * While kcs has been implemented, the IPMI daemon is only functional
   enough to report chassis status.

1 files changed, 64 insertions, 0 deletions

diff --git a/meta-raptor/meta-asus/README b/meta-raptor/meta-asus/README
new file mode 100644
index 0000000..949936b
--- /dev/null
+++ b/meta-raptor/meta-asus/README
@@ -0,0 +1,64 @@
+This README file contains information on the contents of the
+asus layer.
+
+Please see the corresponding sections below for details.
+
+
+Dependencies
+============
+
+This layer depends on:
+
+  URI: git://git.openembedded.org/bitbake
+  branch: master
+
+  URI: git://git.openembedded.org/openembedded-core
+  layers: meta
+  branch: master
+
+  URI: git://git.yoctoproject.org/xxxx
+  layers: xxxx
+  branch: master
+
+
+Patches
+=======
+
+Please submit any patches against the asus layer to the
+xxxx mailing list (xxxx@zzzz.org) and cc: the maintainer:
+
+Maintainer: XXX YYYYYY <xxx.yyyyyy@zzzzz.com>
+
+
+Table of Contents
+=================
+
+  I. Adding the asus layer to your build
+ II. Misc
+
+
+I. Adding the asus layer to your build
+=================================================
+
+--- replace with specific instructions for the asus layer ---
+
+In order to use this layer, you need to make the build system aware of
+it.
+
+Assuming the asus layer exists at the top-level of your
+yocto build tree, you can add it to the build system by adding the
+location of the asus layer to bblayers.conf, along with any
+other layers needed. e.g.:
+
+  BBLAYERS ?= " \
+    /path/to/yocto/meta \
+    /path/to/yocto/meta-yocto \
+    /path/to/yocto/meta-yocto-bsp \
+    /path/to/yocto/meta-asus \
+    "
+
+
+II. Misc
+========
+
+--- replace with specific information about the asus layer ---