diff options
Diffstat (limited to 'arch/arm/cpu/armv7')
144 files changed, 32401 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile new file mode 100644 index 0000000..7a8c2d0 --- /dev/null +++ b/arch/arm/cpu/armv7/Makefile @@ -0,0 +1,55 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(CPU).o + +START := start.o + +COBJS += cache_v7.o + +COBJS += cpu.o +COBJS += syslib.o + +ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI814X),) +SOBJS += lowlevel_init.o +endif + +SRCS := $(START:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/am33xx/Makefile b/arch/arm/cpu/armv7/am33xx/Makefile new file mode 100644 index 0000000..c97e30d --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/Makefile @@ -0,0 +1,50 @@ +# +# Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed "as is" WITHOUT ANY WARRANTY of any +# kind, whether express or implied; without even the implied warranty +# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS-$(CONFIG_AM33XX) += clock_am33xx.o +COBJS-$(CONFIG_TI814X) += clock_ti814x.o +COBJS += sys_info.o +COBJS += mem.o +COBJS += ddr.o +COBJS += emif4.o +COBJS += board.o +COBJS += mux.o +COBJS-$(CONFIG_NAND_OMAP_GPMC) += elm.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(COBJS-y) $(SOBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c new file mode 100644 index 0000000..b935a29 --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -0,0 +1,191 @@ +/* + * board.c + * + * Common board functions for AM33XX based boards + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <errno.h> +#include <spl.h> +#include <asm/arch/cpu.h> +#include <asm/arch/hardware.h> +#include <asm/arch/omap.h> +#include <asm/arch/ddr_defs.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mem.h> +#include <asm/arch/mmc_host_def.h> +#include <asm/arch/sys_proto.h> +#include <asm/io.h> +#include <asm/emif.h> +#include <asm/gpio.h> +#include <i2c.h> +#include <miiphy.h> +#include <cpsw.h> +#include <asm/errno.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/usb/musb.h> +#include <asm/omap_musb.h> + +DECLARE_GLOBAL_DATA_PTR; + +static const struct gpio_bank gpio_bank_am33xx[4] = { + { (void *)AM33XX_GPIO0_BASE, METHOD_GPIO_24XX }, + { (void *)AM33XX_GPIO1_BASE, METHOD_GPIO_24XX }, + { (void *)AM33XX_GPIO2_BASE, METHOD_GPIO_24XX }, + { (void *)AM33XX_GPIO3_BASE, METHOD_GPIO_24XX }, +}; + +const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx; + +#if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD) +int cpu_mmc_init(bd_t *bis) +{ + int ret; + + ret = omap_mmc_init(0, 0, 0, -1, -1); + if (ret) + return ret; + + return omap_mmc_init(1, 0, 0, -1, -1); +} +#endif + +void setup_clocks_for_console(void) +{ + /* Not yet implemented */ + return; +} + +/* AM33XX has two MUSB controllers which can be host or gadget */ +#if (defined(CONFIG_MUSB_GADGET) || defined(CONFIG_MUSB_HOST)) && \ + (defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1)) +static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + +/* USB 2.0 PHY Control */ +#define CM_PHY_PWRDN (1 << 0) +#define CM_PHY_OTG_PWRDN (1 << 1) +#define OTGVDET_EN (1 << 19) +#define OTGSESSENDEN (1 << 20) + +static void am33xx_usb_set_phy_power(u8 on, u32 *reg_addr) +{ + if (on) { + clrsetbits_le32(reg_addr, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN, + OTGVDET_EN | OTGSESSENDEN); + } else { + clrsetbits_le32(reg_addr, 0, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN); + } +} + +static struct musb_hdrc_config musb_config = { + .multipoint = 1, + .dyn_fifo = 1, + .num_eps = 16, + .ram_bits = 12, +}; + +#ifdef CONFIG_AM335X_USB0 +static void am33xx_otg0_set_phy_power(u8 on) +{ + am33xx_usb_set_phy_power(on, &cdev->usb_ctrl0); +} + +struct omap_musb_board_data otg0_board_data = { + .set_phy_power = am33xx_otg0_set_phy_power, +}; + +static struct musb_hdrc_platform_data otg0_plat = { + .mode = CONFIG_AM335X_USB0_MODE, + .config = &musb_config, + .power = 50, + .platform_ops = &musb_dsps_ops, + .board_data = &otg0_board_data, +}; +#endif + +#ifdef CONFIG_AM335X_USB1 +static void am33xx_otg1_set_phy_power(u8 on) +{ + am33xx_usb_set_phy_power(on, &cdev->usb_ctrl1); +} + +struct omap_musb_board_data otg1_board_data = { + .set_phy_power = am33xx_otg1_set_phy_power, +}; + +static struct musb_hdrc_platform_data otg1_plat = { + .mode = CONFIG_AM335X_USB1_MODE, + .config = &musb_config, + .power = 50, + .platform_ops = &musb_dsps_ops, + .board_data = &otg1_board_data, +}; +#endif +#endif + +int arch_misc_init(void) +{ +#ifdef CONFIG_AM335X_USB0 + musb_register(&otg0_plat, &otg0_board_data, + (void *)USB0_OTG_BASE); +#endif +#ifdef CONFIG_AM335X_USB1 + musb_register(&otg1_plat, &otg1_board_data, + (void *)USB1_OTG_BASE); +#endif + return 0; +} + +#ifdef CONFIG_SPL_BUILD +void rtc32k_enable(void) +{ + struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE; + + /* + * Unlock the RTC's registers. For more details please see the + * RTC_SS section of the TRM. In order to unlock we need to + * write these specific values (keys) in this order. + */ + writel(0x83e70b13, &rtc->kick0r); + writel(0x95a4f1e0, &rtc->kick1r); + + /* Enable the RTC 32K OSC by setting bits 3 and 6. */ + writel((1 << 3) | (1 << 6), &rtc->osc); +} + +#define UART_RESET (0x1 << 1) +#define UART_CLK_RUNNING_MASK 0x1 +#define UART_SMART_IDLE_EN (0x1 << 0x3) + +void uart_soft_reset(void) +{ + struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE; + u32 regval; + + regval = readl(&uart_base->uartsyscfg); + regval |= UART_RESET; + writel(regval, &uart_base->uartsyscfg); + while ((readl(&uart_base->uartsyssts) & + UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK) + ; + + /* Disable smart idle */ + regval = readl(&uart_base->uartsyscfg); + regval |= UART_SMART_IDLE_EN; + writel(regval, &uart_base->uartsyscfg); +} +#endif diff --git a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c new file mode 100644 index 0000000..9c4d0b4 --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c @@ -0,0 +1,413 @@ +/* + * clock_am33xx.c + * + * clocks for AM33XX based boards + * + * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <asm/arch/cpu.h> +#include <asm/arch/clock.h> +#include <asm/arch/hardware.h> +#include <asm/io.h> + +#define PRCM_MOD_EN 0x2 +#define PRCM_FORCE_WAKEUP 0x2 +#define PRCM_FUNCTL 0x0 + +#define PRCM_EMIF_CLK_ACTIVITY BIT(2) +#define PRCM_L3_GCLK_ACTIVITY BIT(4) + +#define PLL_BYPASS_MODE 0x4 +#define ST_MN_BYPASS 0x00000100 +#define ST_DPLL_CLK 0x00000001 +#define CLK_SEL_MASK 0x7ffff +#define CLK_DIV_MASK 0x1f +#define CLK_DIV2_MASK 0x7f +#define CLK_SEL_SHIFT 0x8 +#define CLK_MODE_SEL 0x7 +#define CLK_MODE_MASK 0xfffffff8 +#define CLK_DIV_SEL 0xFFFFFFE0 +#define CPGMAC0_IDLE 0x30000 +#define DPLL_CLKDCOLDO_GATE_CTRL 0x300 + +#define OSC (V_OSCK/1000000) + +#define MPUPLL_M CONFIG_SYS_MPUCLK +#define MPUPLL_N (OSC-1) +#define MPUPLL_M2 1 + +/* Core PLL Fdll = 1 GHZ, */ +#define COREPLL_M 1000 +#define COREPLL_N (OSC-1) + +#define COREPLL_M4 10 /* CORE_CLKOUTM4 = 200 MHZ */ +#define COREPLL_M5 8 /* CORE_CLKOUTM5 = 250 MHZ */ +#define COREPLL_M6 4 /* CORE_CLKOUTM6 = 500 MHZ */ + +/* + * USB PHY clock is 960 MHZ. Since, this comes directly from Fdll, Fdll + * frequency needs to be set to 960 MHZ. Hence, + * For clkout = 192 MHZ, Fdll = 960 MHZ, divider values are given below + */ +#define PERPLL_M 960 +#define PERPLL_N (OSC-1) +#define PERPLL_M2 5 + +/* DDR Freq is 266 MHZ for now */ +/* Set Fdll = 400 MHZ , Fdll = M * 2 * CLKINP/ N + 1; clkout = Fdll /(2 * M2) */ +#define DDRPLL_M 266 +#define DDRPLL_N (OSC-1) +#define DDRPLL_M2 1 + +const struct cm_perpll *cmper = (struct cm_perpll *)CM_PER; +const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP; +const struct cm_dpll *cmdpll = (struct cm_dpll *)CM_DPLL; +const struct cm_rtc *cmrtc = (struct cm_rtc *)CM_RTC; + +static void enable_interface_clocks(void) +{ + /* Enable all the Interconnect Modules */ + writel(PRCM_MOD_EN, &cmper->l3clkctrl); + while (readl(&cmper->l3clkctrl) != PRCM_MOD_EN) + ; + + writel(PRCM_MOD_EN, &cmper->l4lsclkctrl); + while (readl(&cmper->l4lsclkctrl) != PRCM_MOD_EN) + ; + + writel(PRCM_MOD_EN, &cmper->l4fwclkctrl); + while (readl(&cmper->l4fwclkctrl) != PRCM_MOD_EN) + ; + + writel(PRCM_MOD_EN, &cmwkup->wkl4wkclkctrl); + while (readl(&cmwkup->wkl4wkclkctrl) != PRCM_MOD_EN) + ; + + writel(PRCM_MOD_EN, &cmper->l3instrclkctrl); + while (readl(&cmper->l3instrclkctrl) != PRCM_MOD_EN) + ; + + writel(PRCM_MOD_EN, &cmper->l4hsclkctrl); + while (readl(&cmper->l4hsclkctrl) != PRCM_MOD_EN) + ; + + writel(PRCM_MOD_EN, &cmwkup->wkgpio0clkctrl); + while (readl(&cmwkup->wkgpio0clkctrl) != PRCM_MOD_EN) + ; +} + +/* + * Force power domain wake up transition + * Ensure that the corresponding interface clock is active before + * using the peripheral + */ +static void power_domain_wkup_transition(void) +{ + writel(PRCM_FORCE_WAKEUP, &cmper->l3clkstctrl); + writel(PRCM_FORCE_WAKEUP, &cmper->l4lsclkstctrl); + writel(PRCM_FORCE_WAKEUP, &cmwkup->wkclkstctrl); + writel(PRCM_FORCE_WAKEUP, &cmper->l4fwclkstctrl); + writel(PRCM_FORCE_WAKEUP, &cmper->l3sclkstctrl); +} + +/* + * Enable the peripheral clock for required peripherals + */ +static void enable_per_clocks(void) +{ + /* Enable the control module though RBL would have done it*/ + writel(PRCM_MOD_EN, &cmwkup->wkctrlclkctrl); + while (readl(&cmwkup->wkctrlclkctrl) != PRCM_MOD_EN) + ; + + /* Enable the module clock */ + writel(PRCM_MOD_EN, &cmper->timer2clkctrl); + while (readl(&cmper->timer2clkctrl) != PRCM_MOD_EN) + ; + + /* Select the Master osc 24 MHZ as Timer2 clock source */ + writel(0x1, &cmdpll->clktimer2clk); + + /* UART0 */ + writel(PRCM_MOD_EN, &cmwkup->wkup_uart0ctrl); + while (readl(&cmwkup->wkup_uart0ctrl) != PRCM_MOD_EN) + ; + + /* UART1 */ +#ifdef CONFIG_SERIAL2 + writel(PRCM_MOD_EN, &cmper->uart1clkctrl); + while (readl(&cmper->uart1clkctrl) != PRCM_MOD_EN) + ; +#endif /* CONFIG_SERIAL2 */ + + /* UART2 */ +#ifdef CONFIG_SERIAL3 + writel(PRCM_MOD_EN, &cmper->uart2clkctrl); + while (readl(&cmper->uart2clkctrl) != PRCM_MOD_EN) + ; +#endif /* CONFIG_SERIAL3 */ + + /* UART3 */ +#ifdef CONFIG_SERIAL4 + writel(PRCM_MOD_EN, &cmper->uart3clkctrl); + while (readl(&cmper->uart3clkctrl) != PRCM_MOD_EN) + ; +#endif /* CONFIG_SERIAL4 */ + + /* UART4 */ +#ifdef CONFIG_SERIAL5 + writel(PRCM_MOD_EN, &cmper->uart4clkctrl); + while (readl(&cmper->uart4clkctrl) != PRCM_MOD_EN) + ; +#endif /* CONFIG_SERIAL5 */ + + /* UART5 */ +#ifdef CONFIG_SERIAL6 + writel(PRCM_MOD_EN, &cmper->uart5clkctrl); + while (readl(&cmper->uart5clkctrl) != PRCM_MOD_EN) + ; +#endif /* CONFIG_SERIAL6 */ + + /* GPMC */ + writel(PRCM_MOD_EN, &cmper->gpmcclkctrl); + while (readl(&cmper->gpmcclkctrl) != PRCM_MOD_EN) + ; + + /* ELM */ + writel(PRCM_MOD_EN, &cmper->elmclkctrl); + while (readl(&cmper->elmclkctrl) != PRCM_MOD_EN) + ; + + /* MMC0*/ + writel(PRCM_MOD_EN, &cmper->mmc0clkctrl); + while (readl(&cmper->mmc0clkctrl) != PRCM_MOD_EN) + ; + + /* MMC1 */ + writel(PRCM_MOD_EN, &cmper->mmc1clkctrl); + while (readl(&cmper->mmc1clkctrl) != PRCM_MOD_EN) + ; + + /* i2c0 */ + writel(PRCM_MOD_EN, &cmwkup->wkup_i2c0ctrl); + while (readl(&cmwkup->wkup_i2c0ctrl) != PRCM_MOD_EN) + ; + + /* gpio1 module */ + writel(PRCM_MOD_EN, &cmper->gpio1clkctrl); + while (readl(&cmper->gpio1clkctrl) != PRCM_MOD_EN) + ; + + /* gpio2 module */ + writel(PRCM_MOD_EN, &cmper->gpio2clkctrl); + while (readl(&cmper->gpio2clkctrl) != PRCM_MOD_EN) + ; + + /* gpio3 module */ + writel(PRCM_MOD_EN, &cmper->gpio3clkctrl); + while (readl(&cmper->gpio3clkctrl) != PRCM_MOD_EN) + ; + + /* i2c1 */ + writel(PRCM_MOD_EN, &cmper->i2c1clkctrl); + while (readl(&cmper->i2c1clkctrl) != PRCM_MOD_EN) + ; + + /* Ethernet */ + writel(PRCM_MOD_EN, &cmper->cpgmac0clkctrl); + while ((readl(&cmper->cpgmac0clkctrl) & CPGMAC0_IDLE) != PRCM_FUNCTL) + ; + + /* spi0 */ + writel(PRCM_MOD_EN, &cmper->spi0clkctrl); + while (readl(&cmper->spi0clkctrl) != PRCM_MOD_EN) + ; + + /* RTC */ + writel(PRCM_MOD_EN, &cmrtc->rtcclkctrl); + while (readl(&cmrtc->rtcclkctrl) != PRCM_MOD_EN) + ; + + /* MUSB */ + writel(PRCM_MOD_EN, &cmper->usb0clkctrl); + while (readl(&cmper->usb0clkctrl) != PRCM_MOD_EN) + ; +} + +void mpu_pll_config_val(int mpull_m) +{ + u32 clkmode, clksel, div_m2; + + clkmode = readl(&cmwkup->clkmoddpllmpu); + clksel = readl(&cmwkup->clkseldpllmpu); + div_m2 = readl(&cmwkup->divm2dpllmpu); + + /* Set the PLL to bypass Mode */ + writel(PLL_BYPASS_MODE, &cmwkup->clkmoddpllmpu); + while (readl(&cmwkup->idlestdpllmpu) != ST_MN_BYPASS) + ; + + clksel = clksel & (~CLK_SEL_MASK); + clksel = clksel | ((mpull_m << CLK_SEL_SHIFT) | MPUPLL_N); + writel(clksel, &cmwkup->clkseldpllmpu); + + div_m2 = div_m2 & ~CLK_DIV_MASK; + div_m2 = div_m2 | MPUPLL_M2; + writel(div_m2, &cmwkup->divm2dpllmpu); + + clkmode = clkmode | CLK_MODE_SEL; + writel(clkmode, &cmwkup->clkmoddpllmpu); + + while (readl(&cmwkup->idlestdpllmpu) != ST_DPLL_CLK) + ; +} + +static void mpu_pll_config(void) +{ + mpu_pll_config_val(CONFIG_SYS_MPUCLK); +} + +static void core_pll_config(void) +{ + u32 clkmode, clksel, div_m4, div_m5, div_m6; + + clkmode = readl(&cmwkup->clkmoddpllcore); + clksel = readl(&cmwkup->clkseldpllcore); + div_m4 = readl(&cmwkup->divm4dpllcore); + div_m5 = readl(&cmwkup->divm5dpllcore); + div_m6 = readl(&cmwkup->divm6dpllcore); + + /* Set the PLL to bypass Mode */ + writel(PLL_BYPASS_MODE, &cmwkup->clkmoddpllcore); + + while (readl(&cmwkup->idlestdpllcore) != ST_MN_BYPASS) + ; + + clksel = clksel & (~CLK_SEL_MASK); + clksel = clksel | ((COREPLL_M << CLK_SEL_SHIFT) | COREPLL_N); + writel(clksel, &cmwkup->clkseldpllcore); + + div_m4 = div_m4 & ~CLK_DIV_MASK; + div_m4 = div_m4 | COREPLL_M4; + writel(div_m4, &cmwkup->divm4dpllcore); + + div_m5 = div_m5 & ~CLK_DIV_MASK; + div_m5 = div_m5 | COREPLL_M5; + writel(div_m5, &cmwkup->divm5dpllcore); + + div_m6 = div_m6 & ~CLK_DIV_MASK; + div_m6 = div_m6 | COREPLL_M6; + writel(div_m6, &cmwkup->divm6dpllcore); + + clkmode = clkmode | CLK_MODE_SEL; + writel(clkmode, &cmwkup->clkmoddpllcore); + + while (readl(&cmwkup->idlestdpllcore) != ST_DPLL_CLK) + ; +} + +static void per_pll_config(void) +{ + u32 clkmode, clksel, div_m2; + + clkmode = readl(&cmwkup->clkmoddpllper); + clksel = readl(&cmwkup->clkseldpllper); + div_m2 = readl(&cmwkup->divm2dpllper); + + /* Set the PLL to bypass Mode */ + writel(PLL_BYPASS_MODE, &cmwkup->clkmoddpllper); + + while (readl(&cmwkup->idlestdpllper) != ST_MN_BYPASS) + ; + + clksel = clksel & (~CLK_SEL_MASK); + clksel = clksel | ((PERPLL_M << CLK_SEL_SHIFT) | PERPLL_N); + writel(clksel, &cmwkup->clkseldpllper); + + div_m2 = div_m2 & ~CLK_DIV2_MASK; + div_m2 = div_m2 | PERPLL_M2; + writel(div_m2, &cmwkup->divm2dpllper); + + clkmode = clkmode | CLK_MODE_SEL; + writel(clkmode, &cmwkup->clkmoddpllper); + + while (readl(&cmwkup->idlestdpllper) != ST_DPLL_CLK) + ; + + writel(DPLL_CLKDCOLDO_GATE_CTRL, &cmwkup->clkdcoldodpllper); +} + +void ddr_pll_config(unsigned int ddrpll_m) +{ + u32 clkmode, clksel, div_m2; + + clkmode = readl(&cmwkup->clkmoddpllddr); + clksel = readl(&cmwkup->clkseldpllddr); + div_m2 = readl(&cmwkup->divm2dpllddr); + + /* Set the PLL to bypass Mode */ + clkmode = (clkmode & CLK_MODE_MASK) | PLL_BYPASS_MODE; + writel(clkmode, &cmwkup->clkmoddpllddr); + + /* Wait till bypass mode is enabled */ + while ((readl(&cmwkup->idlestdpllddr) & ST_MN_BYPASS) + != ST_MN_BYPASS) + ; + + clksel = clksel & (~CLK_SEL_MASK); + clksel = clksel | ((ddrpll_m << CLK_SEL_SHIFT) | DDRPLL_N); + writel(clksel, &cmwkup->clkseldpllddr); + + div_m2 = div_m2 & CLK_DIV_SEL; + div_m2 = div_m2 | DDRPLL_M2; + writel(div_m2, &cmwkup->divm2dpllddr); + + clkmode = (clkmode & CLK_MODE_MASK) | CLK_MODE_SEL; + writel(clkmode, &cmwkup->clkmoddpllddr); + + /* Wait till dpll is locked */ + while ((readl(&cmwkup->idlestdpllddr) & ST_DPLL_CLK) != ST_DPLL_CLK) + ; +} + +void enable_emif_clocks(void) +{ + /* Enable the EMIF_FW Functional clock */ + writel(PRCM_MOD_EN, &cmper->emiffwclkctrl); + /* Enable EMIF0 Clock */ + writel(PRCM_MOD_EN, &cmper->emifclkctrl); + /* Poll if module is functional */ + while ((readl(&cmper->emifclkctrl)) != PRCM_MOD_EN) + ; +} + +/* + * Configure the PLL/PRCM for necessary peripherals + */ +void pll_init() +{ + mpu_pll_config(); + core_pll_config(); + per_pll_config(); + + /* Enable the required interconnect clocks */ + enable_interface_clocks(); + + /* Power domain wake up transition */ + power_domain_wkup_transition(); + + /* Enable the required peripherals */ + enable_per_clocks(); +} diff --git a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c new file mode 100644 index 0000000..8b2878d --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c @@ -0,0 +1,505 @@ +/* + * clock_ti814x.c + * + * Clocks for TI814X based boards + * + * Copyright (C) 2013, Texas Instruments, Incorporated + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <asm/arch/cpu.h> +#include <asm/arch/clock.h> +#include <asm/arch/hardware.h> +#include <asm/io.h> + +/* PRCM */ +#define PRCM_MOD_EN 0x2 + +/* CLK_SRC */ +#define OSC_SRC0 0 +#define OSC_SRC1 1 + +#define L3_OSC_SRC OSC_SRC0 + +#define OSC_0_FREQ 20 + +#define DCO_HS2_MIN 500 +#define DCO_HS2_MAX 1000 +#define DCO_HS1_MIN 1000 +#define DCO_HS1_MAX 2000 + +#define SELFREQDCO_HS2 0x00000801 +#define SELFREQDCO_HS1 0x00001001 + +#define MPU_N 0x1 +#define MPU_M 0x3C +#define MPU_M2 1 +#define MPU_CLKCTRL 0x1 + +#define L3_N 19 +#define L3_M 880 +#define L3_M2 4 +#define L3_CLKCTRL 0x801 + +#define DDR_N 19 +#define DDR_M 666 +#define DDR_M2 2 +#define DDR_CLKCTRL 0x801 + +/* ADPLLJ register values */ +#define ADPLLJ_CLKCTRL_HS2 0x00000801 /* HS2 mode, TINT2 = 1 */ +#define ADPLLJ_CLKCTRL_HS1 0x00001001 /* HS1 mode, TINT2 = 1 */ +#define ADPLLJ_CLKCTRL_CLKDCOLDOEN (1 << 29) +#define ADPLLJ_CLKCTRL_IDLE (1 << 23) +#define ADPLLJ_CLKCTRL_CLKOUTEN (1 << 20) +#define ADPLLJ_CLKCTRL_CLKOUTLDOEN (1 << 19) +#define ADPLLJ_CLKCTRL_CLKDCOLDOPWDNZ (1 << 17) +#define ADPLLJ_CLKCTRL_LPMODE (1 << 12) +#define ADPLLJ_CLKCTRL_DRIFTGUARDIAN (1 << 11) +#define ADPLLJ_CLKCTRL_REGM4XEN (1 << 10) +#define ADPLLJ_CLKCTRL_TINITZ (1 << 0) +#define ADPLLJ_CLKCTRL_CLKDCO (ADPLLJ_CLKCTRL_CLKDCOLDOEN | \ + ADPLLJ_CLKCTRL_CLKOUTEN | \ + ADPLLJ_CLKCTRL_CLKOUTLDOEN | \ + ADPLLJ_CLKCTRL_CLKDCOLDOPWDNZ) + +#define ADPLLJ_STATUS_PHASELOCK (1 << 10) +#define ADPLLJ_STATUS_FREQLOCK (1 << 9) +#define ADPLLJ_STATUS_PHSFRQLOCK (ADPLLJ_STATUS_PHASELOCK | \ + ADPLLJ_STATUS_FREQLOCK) +#define ADPLLJ_STATUS_BYPASSACK (1 << 8) +#define ADPLLJ_STATUS_BYPASS (1 << 0) +#define ADPLLJ_STATUS_BYPASSANDACK (ADPLLJ_STATUS_BYPASSACK | \ + ADPLLJ_STATUS_BYPASS) + +#define ADPLLJ_TENABLE_ENB (1 << 0) +#define ADPLLJ_TENABLEDIV_ENB (1 << 0) + +#define ADPLLJ_M2NDIV_M2SHIFT 16 + +#define MPU_PLL_BASE (PLL_SUBSYS_BASE + 0x048) +#define L3_PLL_BASE (PLL_SUBSYS_BASE + 0x110) +#define DDR_PLL_BASE (PLL_SUBSYS_BASE + 0x290) + +struct ad_pll { + unsigned int pwrctrl; + unsigned int clkctrl; + unsigned int tenable; + unsigned int tenablediv; + unsigned int m2ndiv; + unsigned int mn2div; + unsigned int fracdiv; + unsigned int bwctrl; + unsigned int fracctrl; + unsigned int status; + unsigned int m3div; + unsigned int rampctrl; +}; + +#define OSC_SRC_CTRL (PLL_SUBSYS_BASE + 0x2C0) + +/* PRCM */ +#define ENET_CLKCTRL_CMPL 0x30000 + +#define CM_DEFAULT_BASE (PRCM_BASE + 0x0500) + +struct cm_def { + unsigned int resv0[2]; + unsigned int l3fastclkstctrl; + unsigned int resv1[1]; + unsigned int pciclkstctrl; + unsigned int resv2[1]; + unsigned int ducaticlkstctrl; + unsigned int resv3[1]; + unsigned int emif0clkctrl; + unsigned int emif1clkctrl; + unsigned int dmmclkctrl; + unsigned int fwclkctrl; + unsigned int resv4[10]; + unsigned int usbclkctrl; + unsigned int resv5[1]; + unsigned int sataclkctrl; + unsigned int resv6[4]; + unsigned int ducaticlkctrl; + unsigned int pciclkctrl; +}; + +#define CM_ALWON_BASE (PRCM_BASE + 0x1400) + +struct cm_alwon { + unsigned int l3slowclkstctrl; + unsigned int ethclkstctrl; + unsigned int l3medclkstctrl; + unsigned int mmu_clkstctrl; + unsigned int mmucfg_clkstctrl; + unsigned int ocmc0clkstctrl; + unsigned int vcpclkstctrl; + unsigned int mpuclkstctrl; + unsigned int sysclk4clkstctrl; + unsigned int sysclk5clkstctrl; + unsigned int sysclk6clkstctrl; + unsigned int rtcclkstctrl; + unsigned int l3fastclkstctrl; + unsigned int resv0[67]; + unsigned int mcasp0clkctrl; + unsigned int mcasp1clkctrl; + unsigned int mcasp2clkctrl; + unsigned int mcbspclkctrl; + unsigned int uart0clkctrl; + unsigned int uart1clkctrl; + unsigned int uart2clkctrl; + unsigned int gpio0clkctrl; + unsigned int gpio1clkctrl; + unsigned int i2c0clkctrl; + unsigned int i2c1clkctrl; + unsigned int mcasp345clkctrl; + unsigned int atlclkctrl; + unsigned int mlbclkctrl; + unsigned int pataclkctrl; + unsigned int resv1[1]; + unsigned int uart3clkctrl; + unsigned int uart4clkctrl; + unsigned int uart5clkctrl; + unsigned int wdtimerclkctrl; + unsigned int spiclkctrl; + unsigned int mailboxclkctrl; + unsigned int spinboxclkctrl; + unsigned int mmudataclkctrl; + unsigned int resv2[2]; + unsigned int mmucfgclkctrl; + unsigned int resv3[2]; + unsigned int ocmc0clkctrl; + unsigned int vcpclkctrl; + unsigned int resv4[2]; + unsigned int controlclkctrl; + unsigned int resv5[2]; + unsigned int gpmcclkctrl; + unsigned int ethernet0clkctrl; + unsigned int ethernet1clkctrl; + unsigned int mpuclkctrl; + unsigned int debugssclkctrl; + unsigned int l3clkctrl; + unsigned int l4hsclkctrl; + unsigned int l4lsclkctrl; + unsigned int rtcclkctrl; + unsigned int tpccclkctrl; + unsigned int tptc0clkctrl; + unsigned int tptc1clkctrl; + unsigned int tptc2clkctrl; + unsigned int tptc3clkctrl; + unsigned int resv7[4]; + unsigned int dcan01clkctrl; + unsigned int mmchs0clkctrl; + unsigned int mmchs1clkctrl; + unsigned int mmchs2clkctrl; + unsigned int custefuseclkctrl; +}; + +#define SATA_PLL_BASE (CTRL_BASE + 0x0720) + +struct sata_pll { + unsigned int pllcfg0; + unsigned int pllcfg1; + unsigned int pllcfg2; + unsigned int pllcfg3; + unsigned int pllcfg4; + unsigned int pllstatus; + unsigned int rxstatus; + unsigned int txstatus; + unsigned int testcfg; +}; + +#define SEL_IN_FREQ (0x1 << 31) +#define DIGCLRZ (0x1 << 30) +#define ENDIGLDO (0x1 << 4) +#define APLL_CP_CURR (0x1 << 3) +#define ENBGSC_REF (0x1 << 2) +#define ENPLLLDO (0x1 << 1) +#define ENPLL (0x1 << 0) + +#define SATA_PLLCFG0_1 (SEL_IN_FREQ | ENBGSC_REF) +#define SATA_PLLCFG0_2 (SEL_IN_FREQ | ENDIGLDO | ENBGSC_REF) +#define SATA_PLLCFG0_3 (SEL_IN_FREQ | ENDIGLDO | ENBGSC_REF | ENPLLLDO) +#define SATA_PLLCFG0_4 (SEL_IN_FREQ | DIGCLRZ | ENDIGLDO | ENBGSC_REF | \ + ENPLLLDO | ENPLL) + +#define PLL_LOCK (0x1 << 0) + +#define ENSATAMODE (0x1 << 31) +#define PLLREFSEL (0x1 << 30) +#define MDIVINT (0x4b << 18) +#define EN_CLKAUX (0x1 << 5) +#define EN_CLK125M (0x1 << 4) +#define EN_CLK100M (0x1 << 3) +#define EN_CLK50M (0x1 << 2) + +#define SATA_PLLCFG1 (ENSATAMODE | \ + PLLREFSEL | \ + MDIVINT | \ + EN_CLKAUX | \ + EN_CLK125M | \ + EN_CLK100M | \ + EN_CLK50M) + +#define DIGLDO_EN_CAPLESSMODE (0x1 << 22) +#define PLLDO_EN_LDO_STABLE (0x1 << 11) +#define PLLDO_EN_BUF_CUR (0x1 << 7) +#define PLLDO_EN_LP (0x1 << 6) +#define PLLDO_CTRL_TRIM_1_4V (0x10 << 1) + +#define SATA_PLLCFG3 (DIGLDO_EN_CAPLESSMODE | \ + PLLDO_EN_LDO_STABLE | \ + PLLDO_EN_BUF_CUR | \ + PLLDO_EN_LP | \ + PLLDO_CTRL_TRIM_1_4V) + +const struct cm_alwon *cmalwon = (struct cm_alwon *)CM_ALWON_BASE; +const struct cm_def *cmdef = (struct cm_def *)CM_DEFAULT_BASE; +const struct sata_pll *spll = (struct sata_pll *)SATA_PLL_BASE; + +/* + * Enable the peripheral clock for required peripherals + */ +static void enable_per_clocks(void) +{ + /* UART0 */ + writel(PRCM_MOD_EN, &cmalwon->uart0clkctrl); + while (readl(&cmalwon->uart0clkctrl) != PRCM_MOD_EN) + ; + + /* HSMMC1 */ + writel(PRCM_MOD_EN, &cmalwon->mmchs1clkctrl); + while (readl(&cmalwon->mmchs1clkctrl) != PRCM_MOD_EN) + ; + + /* Ethernet */ + writel(PRCM_MOD_EN, &cmalwon->ethclkstctrl); + writel(PRCM_MOD_EN, &cmalwon->ethernet0clkctrl); + while ((readl(&cmalwon->ethernet0clkctrl) & ENET_CLKCTRL_CMPL) != 0) + ; + writel(PRCM_MOD_EN, &cmalwon->ethernet1clkctrl); + while ((readl(&cmalwon->ethernet1clkctrl) & ENET_CLKCTRL_CMPL) != 0) + ; +} + +/* + * select the HS1 or HS2 for DCO Freq + * return : CLKCTRL + */ +static u32 pll_dco_freq_sel(u32 clkout_dco) +{ + if (clkout_dco >= DCO_HS2_MIN && clkout_dco < DCO_HS2_MAX) + return SELFREQDCO_HS2; + else if (clkout_dco >= DCO_HS1_MIN && clkout_dco < DCO_HS1_MAX) + return SELFREQDCO_HS1; + else + return -1; +} + +/* + * select the sigma delta config + * return: sigma delta val + */ +static u32 pll_sigma_delta_val(u32 clkout_dco) +{ + u32 sig_val = 0; + float frac_div; + + frac_div = (float) clkout_dco / 250; + frac_div = frac_div + 0.90; + sig_val = (int)frac_div; + sig_val = sig_val << 24; + + return sig_val; +} + +/* + * configure individual ADPLLJ + */ +static void pll_config(u32 base, u32 n, u32 m, u32 m2, + u32 clkctrl_val, int adpllj) +{ + const struct ad_pll *adpll = (struct ad_pll *)base; + u32 m2nval, mn2val, read_clkctrl = 0, clkout_dco = 0; + u32 sig_val = 0, hs_mod = 0; + + m2nval = (m2 << ADPLLJ_M2NDIV_M2SHIFT) | n; + mn2val = m; + + /* calculate clkout_dco */ + clkout_dco = ((OSC_0_FREQ / (n+1)) * m); + + /* sigma delta & Hs mode selection skip for ADPLLS*/ + if (adpllj) { + sig_val = pll_sigma_delta_val(clkout_dco); + hs_mod = pll_dco_freq_sel(clkout_dco); + } + + /* by-pass pll */ + read_clkctrl = readl(&adpll->clkctrl); + writel((read_clkctrl | ADPLLJ_CLKCTRL_IDLE), &adpll->clkctrl); + while ((readl(&adpll->status) & ADPLLJ_STATUS_BYPASSANDACK) + != ADPLLJ_STATUS_BYPASSANDACK) + ; + + /* clear TINITZ */ + read_clkctrl = readl(&adpll->clkctrl); + writel((read_clkctrl & ~ADPLLJ_CLKCTRL_TINITZ), &adpll->clkctrl); + + /* + * ref_clk = 20/(n + 1); + * clkout_dco = ref_clk * m; + * clk_out = clkout_dco/m2; + */ + read_clkctrl = readl(&adpll->clkctrl) & + ~(ADPLLJ_CLKCTRL_LPMODE | + ADPLLJ_CLKCTRL_DRIFTGUARDIAN | + ADPLLJ_CLKCTRL_REGM4XEN); + writel(m2nval, &adpll->m2ndiv); + writel(mn2val, &adpll->mn2div); + + /* Skip for modena(ADPLLS) */ + if (adpllj) { + writel(sig_val, &adpll->fracdiv); + writel((read_clkctrl | hs_mod), &adpll->clkctrl); + } + + /* Load M2, N2 dividers of ADPLL */ + writel(ADPLLJ_TENABLEDIV_ENB, &adpll->tenablediv); + writel(~ADPLLJ_TENABLEDIV_ENB, &adpll->tenablediv); + + /* Load M, N dividers of ADPLL */ + writel(ADPLLJ_TENABLE_ENB, &adpll->tenable); + writel(~ADPLLJ_TENABLE_ENB, &adpll->tenable); + + /* Configure CLKDCOLDOEN,CLKOUTLDOEN,CLKOUT Enable BITS */ + read_clkctrl = readl(&adpll->clkctrl) & ~ADPLLJ_CLKCTRL_CLKDCO; + if (adpllj) + writel((read_clkctrl | ADPLLJ_CLKCTRL_CLKDCO), + &adpll->clkctrl); + + /* Enable TINTZ and disable IDLE(PLL in Active & Locked Mode */ + read_clkctrl = readl(&adpll->clkctrl) & ~ADPLLJ_CLKCTRL_IDLE; + writel((read_clkctrl | ADPLLJ_CLKCTRL_TINITZ), &adpll->clkctrl); + + /* Wait for phase and freq lock */ + while ((readl(&adpll->status) & ADPLLJ_STATUS_PHSFRQLOCK) != + ADPLLJ_STATUS_PHSFRQLOCK) + ; +} + +static void unlock_pll_control_mmr(void) +{ + /* TRM 2.10.1.4 and 3.2.7-3.2.11 */ + writel(0x1EDA4C3D, 0x481C5040); + writel(0x2FF1AC2B, 0x48140060); + writel(0xF757FDC0, 0x48140064); + writel(0xE2BC3A6D, 0x48140068); + writel(0x1EBF131D, 0x4814006c); + writel(0x6F361E05, 0x48140070); +} + +static void mpu_pll_config(void) +{ + pll_config(MPU_PLL_BASE, MPU_N, MPU_M, MPU_M2, MPU_CLKCTRL, 0); +} + +static void l3_pll_config(void) +{ + u32 l3_osc_src, rd_osc_src = 0; + + l3_osc_src = L3_OSC_SRC; + rd_osc_src = readl(OSC_SRC_CTRL); + + if (OSC_SRC0 == l3_osc_src) + writel((rd_osc_src & 0xfffffffe)|0x0, OSC_SRC_CTRL); + else + writel((rd_osc_src & 0xfffffffe)|0x1, OSC_SRC_CTRL); + + pll_config(L3_PLL_BASE, L3_N, L3_M, L3_M2, L3_CLKCTRL, 1); +} + +void ddr_pll_config(unsigned int ddrpll_m) +{ + pll_config(DDR_PLL_BASE, DDR_N, DDR_M, DDR_M2, DDR_CLKCTRL, 1); +} + +void sata_pll_config(void) +{ + /* + * This sequence for configuring the SATA PLL + * resident in the control module is documented + * in TI8148 TRM section 21.3.1 + */ + writel(SATA_PLLCFG1, &spll->pllcfg1); + udelay(50); + + writel(SATA_PLLCFG3, &spll->pllcfg3); + udelay(50); + + writel(SATA_PLLCFG0_1, &spll->pllcfg0); + udelay(50); + + writel(SATA_PLLCFG0_2, &spll->pllcfg0); + udelay(50); + + writel(SATA_PLLCFG0_3, &spll->pllcfg0); + udelay(50); + + writel(SATA_PLLCFG0_4, &spll->pllcfg0); + udelay(50); + + while (((readl(&spll->pllstatus) & PLL_LOCK) == 0)) + ; +} + +void enable_emif_clocks(void) {}; + +void enable_dmm_clocks(void) +{ + writel(PRCM_MOD_EN, &cmdef->fwclkctrl); + writel(PRCM_MOD_EN, &cmdef->l3fastclkstctrl); + writel(PRCM_MOD_EN, &cmdef->emif0clkctrl); + while ((readl(&cmdef->emif0clkctrl)) != PRCM_MOD_EN) + ; + writel(PRCM_MOD_EN, &cmdef->emif1clkctrl); + while ((readl(&cmdef->emif1clkctrl)) != PRCM_MOD_EN) + ; + while ((readl(&cmdef->l3fastclkstctrl) & 0x300) != 0x300) + ; + writel(PRCM_MOD_EN, &cmdef->dmmclkctrl); + while ((readl(&cmdef->dmmclkctrl)) != PRCM_MOD_EN) + ; + writel(PRCM_MOD_EN, &cmalwon->l3slowclkstctrl); + while ((readl(&cmalwon->l3slowclkstctrl) & 0x2100) != 0x2100) + ; +} + +/* + * Configure the PLL/PRCM for necessary peripherals + */ +void pll_init() +{ + unlock_pll_control_mmr(); + + /* Enable the control module */ + writel(PRCM_MOD_EN, &cmalwon->controlclkctrl); + + /* Configure PLLs */ + mpu_pll_config(); + l3_pll_config(); + sata_pll_config(); + + /* Enable the required peripherals */ + enable_per_clocks(); +} diff --git a/arch/arm/cpu/armv7/am33xx/config.mk b/arch/arm/cpu/armv7/am33xx/config.mk new file mode 100644 index 0000000..babf0eb --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/config.mk @@ -0,0 +1,19 @@ +# +# Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed "as is" WITHOUT ANY WARRANTY of any +# kind, whether express or implied; without even the implied warranty +# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +ifdef CONFIG_SPL_BUILD +ALL-y += $(OBJTREE)/MLO +ALL-$(CONFIG_SPL_SPI_SUPPORT) += $(OBJTREE)/MLO.byteswap +else +ALL-y += $(obj)u-boot.img +endif diff --git a/arch/arm/cpu/armv7/am33xx/ddr.c b/arch/arm/cpu/armv7/am33xx/ddr.c new file mode 100644 index 0000000..d1e2fd3 --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/ddr.c @@ -0,0 +1,147 @@ +/* + * DDR Configuration for AM33xx devices. + * + * Copyright (C) 2011 Texas Instruments Incorporated - +http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <asm/arch/cpu.h> +#include <asm/arch/ddr_defs.h> +#include <asm/arch/sys_proto.h> +#include <asm/io.h> +#include <asm/emif.h> + +/** + * Base address for EMIF instances + */ +static struct emif_reg_struct *emif_reg[2] = { + (struct emif_reg_struct *)EMIF4_0_CFG_BASE, + (struct emif_reg_struct *)EMIF4_1_CFG_BASE}; + +/** + * Base addresses for DDR PHY cmd/data regs + */ +static struct ddr_cmd_regs *ddr_cmd_reg[2] = { + (struct ddr_cmd_regs *)DDR_PHY_CMD_ADDR, + (struct ddr_cmd_regs *)DDR_PHY_CMD_ADDR2}; + +static struct ddr_data_regs *ddr_data_reg[2] = { + (struct ddr_data_regs *)DDR_PHY_DATA_ADDR, + (struct ddr_data_regs *)DDR_PHY_DATA_ADDR2}; + +/** + * Base address for ddr io control instances + */ +static struct ddr_cmdtctrl *ioctrl_reg = { + (struct ddr_cmdtctrl *)DDR_CONTROL_BASE_ADDR}; + +/** + * Configure SDRAM + */ +void config_sdram(const struct emif_regs *regs, int nr) +{ + if (regs->zq_config) { + /* + * A value of 0x2800 for the REF CTRL will give us + * about 570us for a delay, which will be long enough + * to configure things. + */ + writel(0x2800, &emif_reg[nr]->emif_sdram_ref_ctrl); + writel(regs->zq_config, &emif_reg[nr]->emif_zq_config); + writel(regs->sdram_config, &cstat->secure_emif_sdram_config); + writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config); + writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl); + writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl_shdw); + } + writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl); + writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl_shdw); + writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config); +} + +/** + * Set SDRAM timings + */ +void set_sdram_timings(const struct emif_regs *regs, int nr) +{ + writel(regs->sdram_tim1, &emif_reg[nr]->emif_sdram_tim_1); + writel(regs->sdram_tim1, &emif_reg[nr]->emif_sdram_tim_1_shdw); + writel(regs->sdram_tim2, &emif_reg[nr]->emif_sdram_tim_2); + writel(regs->sdram_tim2, &emif_reg[nr]->emif_sdram_tim_2_shdw); + writel(regs->sdram_tim3, &emif_reg[nr]->emif_sdram_tim_3); + writel(regs->sdram_tim3, &emif_reg[nr]->emif_sdram_tim_3_shdw); +} + +/** + * Configure DDR PHY + */ +void config_ddr_phy(const struct emif_regs *regs, int nr) +{ + writel(regs->emif_ddr_phy_ctlr_1, + &emif_reg[nr]->emif_ddr_phy_ctrl_1); + writel(regs->emif_ddr_phy_ctlr_1, + &emif_reg[nr]->emif_ddr_phy_ctrl_1_shdw); +} + +/** + * Configure DDR CMD control registers + */ +void config_cmd_ctrl(const struct cmd_control *cmd, int nr) +{ + writel(cmd->cmd0csratio, &ddr_cmd_reg[nr]->cm0csratio); + writel(cmd->cmd0dldiff, &ddr_cmd_reg[nr]->cm0dldiff); + writel(cmd->cmd0iclkout, &ddr_cmd_reg[nr]->cm0iclkout); + + writel(cmd->cmd1csratio, &ddr_cmd_reg[nr]->cm1csratio); + writel(cmd->cmd1dldiff, &ddr_cmd_reg[nr]->cm1dldiff); + writel(cmd->cmd1iclkout, &ddr_cmd_reg[nr]->cm1iclkout); + + writel(cmd->cmd2csratio, &ddr_cmd_reg[nr]->cm2csratio); + writel(cmd->cmd2dldiff, &ddr_cmd_reg[nr]->cm2dldiff); + writel(cmd->cmd2iclkout, &ddr_cmd_reg[nr]->cm2iclkout); +} + +/** + * Configure DDR DATA registers + */ +void config_ddr_data(const struct ddr_data *data, int nr) +{ + int i; + + for (i = 0; i < DDR_DATA_REGS_NR; i++) { + writel(data->datardsratio0, + &(ddr_data_reg[nr]+i)->dt0rdsratio0); + writel(data->datawdsratio0, + &(ddr_data_reg[nr]+i)->dt0wdsratio0); + writel(data->datawiratio0, + &(ddr_data_reg[nr]+i)->dt0wiratio0); + writel(data->datagiratio0, + &(ddr_data_reg[nr]+i)->dt0giratio0); + writel(data->datafwsratio0, + &(ddr_data_reg[nr]+i)->dt0fwsratio0); + writel(data->datawrsratio0, + &(ddr_data_reg[nr]+i)->dt0wrsratio0); + writel(data->datauserank0delay, + &(ddr_data_reg[nr]+i)->dt0rdelays0); + writel(data->datadldiff0, + &(ddr_data_reg[nr]+i)->dt0dldiff0); + } +} + +void config_io_ctrl(unsigned long val) +{ + writel(val, &ioctrl_reg->cm0ioctl); + writel(val, &ioctrl_reg->cm1ioctl); + writel(val, &ioctrl_reg->cm2ioctl); + writel(val, &ioctrl_reg->dt0ioctl); + writel(val, &ioctrl_reg->dt1ioctl); +} diff --git a/arch/arm/cpu/armv7/am33xx/elm.c b/arch/arm/cpu/armv7/am33xx/elm.c new file mode 100644 index 0000000..41df612 --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/elm.c @@ -0,0 +1,212 @@ +/* + * (C) Copyright 2010-2011 Texas Instruments, <www.ti.com> + * Mansoor Ahamed <mansoor.ahamed@ti.com> + * + * BCH Error Location Module (ELM) support. + * + * NOTE: + * 1. Supports only continuous mode. Dont see need for page mode in uboot + * 2. Supports only syndrome polynomial 0. i.e. poly local variable is + * always set to ELM_DEFAULT_POLY. Dont see need for other polynomial + * sets in uboot + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/cpu.h> +#include <asm/omap_gpmc.h> +#include <asm/arch/elm.h> + +#define ELM_DEFAULT_POLY (0) + +struct elm *elm_cfg; + +/** + * elm_load_syndromes - Load BCH syndromes based on nibble selection + * @syndrome: BCH syndrome + * @nibbles: + * @poly: Syndrome Polynomial set to use + * + * Load BCH syndromes based on nibble selection + */ +static void elm_load_syndromes(u8 *syndrome, u32 nibbles, u8 poly) +{ + u32 *ptr; + u32 val; + + /* reg 0 */ + ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[0]; + val = syndrome[0] | (syndrome[1] << 8) | (syndrome[2] << 16) | + (syndrome[3] << 24); + writel(val, ptr); + /* reg 1 */ + ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[1]; + val = syndrome[4] | (syndrome[5] << 8) | (syndrome[6] << 16) | + (syndrome[7] << 24); + writel(val, ptr); + + /* BCH 8-bit with 26 nibbles (4*8=32) */ + if (nibbles > 13) { + /* reg 2 */ + ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[2]; + val = syndrome[8] | (syndrome[9] << 8) | (syndrome[10] << 16) | + (syndrome[11] << 24); + writel(val, ptr); + /* reg 3 */ + ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[3]; + val = syndrome[12] | (syndrome[13] << 8) | + (syndrome[14] << 16) | (syndrome[15] << 24); + writel(val, ptr); + } + + /* BCH 16-bit with 52 nibbles (7*8=56) */ + if (nibbles > 26) { + /* reg 4 */ + ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[4]; + val = syndrome[16] | (syndrome[17] << 8) | + (syndrome[18] << 16) | (syndrome[19] << 24); + writel(val, ptr); + + /* reg 5 */ + ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[5]; + val = syndrome[20] | (syndrome[21] << 8) | + (syndrome[22] << 16) | (syndrome[23] << 24); + writel(val, ptr); + + /* reg 6 */ + ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6]; + val = syndrome[24] | (syndrome[25] << 8) | + (syndrome[26] << 16) | (syndrome[27] << 24); + writel(val, ptr); + } +} + +/** + * elm_check_errors - Check for BCH errors and return error locations + * @syndrome: BCH syndrome + * @nibbles: + * @error_count: Returns number of errrors in the syndrome + * @error_locations: Returns error locations (in decimal) in this array + * + * Check the provided syndrome for BCH errors and return error count + * and locations in the array passed. Returns -1 if error is not correctable, + * else returns 0 + */ +int elm_check_error(u8 *syndrome, u32 nibbles, u32 *error_count, + u32 *error_locations) +{ + u8 poly = ELM_DEFAULT_POLY; + s8 i; + u32 location_status; + + elm_load_syndromes(syndrome, nibbles, poly); + + /* start processing */ + writel((readl(&elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6]) + | ELM_SYNDROME_FRAGMENT_6_SYNDROME_VALID), + &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6]); + + /* wait for processing to complete */ + while ((readl(&elm_cfg->irqstatus) & (0x1 << poly)) != 0x1) + ; + /* clear status */ + writel((readl(&elm_cfg->irqstatus) | (0x1 << poly)), + &elm_cfg->irqstatus); + + /* check if correctable */ + location_status = readl(&elm_cfg->error_location[poly].location_status); + if (!(location_status & ELM_LOCATION_STATUS_ECC_CORRECTABLE_MASK)) + return -1; + + /* get error count */ + *error_count = readl(&elm_cfg->error_location[poly].location_status) & + ELM_LOCATION_STATUS_ECC_NB_ERRORS_MASK; + + for (i = 0; i < *error_count; i++) { + error_locations[i] = + readl(&elm_cfg->error_location[poly].error_location_x[i]); + } + + return 0; +} + + +/** + * elm_config - Configure ELM module + * @level: 4 / 8 / 16 bit BCH + * + * Configure ELM module based on BCH level. + * Set mode as continuous mode. + * Currently we are using only syndrome 0 and syndromes 1 to 6 are not used. + * Also, the mode is set only for syndrome 0 + */ +int elm_config(enum bch_level level) +{ + u32 val; + u8 poly = ELM_DEFAULT_POLY; + u32 buffer_size = 0x7FF; + + /* config size and level */ + val = (u32)(level) & ELM_LOCATION_CONFIG_ECC_BCH_LEVEL_MASK; + val |= ((buffer_size << ELM_LOCATION_CONFIG_ECC_SIZE_POS) & + ELM_LOCATION_CONFIG_ECC_SIZE_MASK); + writel(val, &elm_cfg->location_config); + + /* config continous mode */ + /* enable interrupt generation for syndrome polynomial set */ + writel((readl(&elm_cfg->irqenable) | (0x1 << poly)), + &elm_cfg->irqenable); + /* set continuous mode for the syndrome polynomial set */ + writel((readl(&elm_cfg->page_ctrl) & ~(0x1 << poly)), + &elm_cfg->page_ctrl); + + return 0; +} + +/** + * elm_reset - Do a soft reset of ELM + * + * Perform a soft reset of ELM and return after reset is done. + */ +void elm_reset(void) +{ + /* initiate reset */ + writel((readl(&elm_cfg->sysconfig) | ELM_SYSCONFIG_SOFTRESET), + &elm_cfg->sysconfig); + + /* wait for reset complete and normal operation */ + while ((readl(&elm_cfg->sysstatus) & ELM_SYSSTATUS_RESETDONE) != + ELM_SYSSTATUS_RESETDONE) + ; +} + +/** + * elm_init - Initialize ELM module + * + * Initialize ELM support. Currently it does only base address init + * and ELM reset. + */ +void elm_init(void) +{ + elm_cfg = (struct elm *)ELM_BASE; + elm_reset(); +} diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c new file mode 100644 index 0000000..aa84e96 --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/emif4.c @@ -0,0 +1,108 @@ +/* + * emif4.c + * + * AM33XX emif4 configuration file + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <asm/arch/cpu.h> +#include <asm/arch/ddr_defs.h> +#include <asm/arch/hardware.h> +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> +#include <asm/io.h> +#include <asm/emif.h> + +DECLARE_GLOBAL_DATA_PTR; + +int dram_init(void) +{ + /* dram_init must store complete ramsize in gd->ram_size */ + gd->ram_size = get_ram_size( + (void *)CONFIG_SYS_SDRAM_BASE, + CONFIG_MAX_RAM_BANK_SIZE); + return 0; +} + +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; + gd->bd->bi_dram[0].size = gd->ram_size; +} + + +#ifdef CONFIG_SPL_BUILD +static struct dmm_lisa_map_regs *hw_lisa_map_regs = + (struct dmm_lisa_map_regs *)DMM_BASE; +static struct vtp_reg *vtpreg[2] = { + (struct vtp_reg *)VTP0_CTRL_ADDR, + (struct vtp_reg *)VTP1_CTRL_ADDR}; +#ifdef CONFIG_AM33XX +static struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR; +#endif + +void config_dmm(const struct dmm_lisa_map_regs *regs) +{ + enable_dmm_clocks(); + + writel(0, &hw_lisa_map_regs->dmm_lisa_map_3); + writel(0, &hw_lisa_map_regs->dmm_lisa_map_2); + writel(0, &hw_lisa_map_regs->dmm_lisa_map_1); + writel(0, &hw_lisa_map_regs->dmm_lisa_map_0); + + writel(regs->dmm_lisa_map_3, &hw_lisa_map_regs->dmm_lisa_map_3); + writel(regs->dmm_lisa_map_2, &hw_lisa_map_regs->dmm_lisa_map_2); + writel(regs->dmm_lisa_map_1, &hw_lisa_map_regs->dmm_lisa_map_1); + writel(regs->dmm_lisa_map_0, &hw_lisa_map_regs->dmm_lisa_map_0); +} + +static void config_vtp(int nr) +{ + writel(readl(&vtpreg[nr]->vtp0ctrlreg) | VTP_CTRL_ENABLE, + &vtpreg[nr]->vtp0ctrlreg); + writel(readl(&vtpreg[nr]->vtp0ctrlreg) & (~VTP_CTRL_START_EN), + &vtpreg[nr]->vtp0ctrlreg); + writel(readl(&vtpreg[nr]->vtp0ctrlreg) | VTP_CTRL_START_EN, + &vtpreg[nr]->vtp0ctrlreg); + + /* Poll for READY */ + while ((readl(&vtpreg[nr]->vtp0ctrlreg) & VTP_CTRL_READY) != + VTP_CTRL_READY) + ; +} + +void config_ddr(unsigned int pll, unsigned int ioctrl, + const struct ddr_data *data, const struct cmd_control *ctrl, + const struct emif_regs *regs, int nr) +{ + enable_emif_clocks(); + ddr_pll_config(pll); + config_vtp(nr); + config_cmd_ctrl(ctrl, nr); + + config_ddr_data(data, nr); +#ifdef CONFIG_AM33XX + config_io_ctrl(ioctrl); + + /* Set CKE to be controlled by EMIF/DDR PHY */ + writel(DDR_CKE_CTRL_NORMAL, &ddrctrl->ddrckectrl); +#endif + + /* Program EMIF instance */ + config_ddr_phy(regs, nr); + set_sdram_timings(regs, nr); + config_sdram(regs, nr); +} +#endif diff --git a/arch/arm/cpu/armv7/am33xx/mem.c b/arch/arm/cpu/armv7/am33xx/mem.c new file mode 100644 index 0000000..b86b0de --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/mem.c @@ -0,0 +1,101 @@ +/* + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Author : + * Mansoor Ahamed <mansoor.ahamed@ti.com> + * + * Initial Code from: + * Manikandan Pillai <mani.pillai@ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/mem.h> +#include <asm/arch/sys_proto.h> +#include <command.h> + +struct gpmc *gpmc_cfg; + +#if defined(CONFIG_CMD_NAND) +static const u32 gpmc_m_nand[GPMC_MAX_REG] = { + M_NAND_GPMC_CONFIG1, + M_NAND_GPMC_CONFIG2, + M_NAND_GPMC_CONFIG3, + M_NAND_GPMC_CONFIG4, + M_NAND_GPMC_CONFIG5, + M_NAND_GPMC_CONFIG6, 0 +}; +#endif + + +void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base, + u32 size) +{ + writel(0, &cs->config7); + sdelay(1000); + /* Delay for settling */ + writel(gpmc_config[0], &cs->config1); + writel(gpmc_config[1], &cs->config2); + writel(gpmc_config[2], &cs->config3); + writel(gpmc_config[3], &cs->config4); + writel(gpmc_config[4], &cs->config5); + writel(gpmc_config[5], &cs->config6); + /* Enable the config */ + writel((((size & 0xF) << 8) | ((base >> 24) & 0x3F) | + (1 << 6)), &cs->config7); + sdelay(2000); +} + +/***************************************************** + * gpmc_init(): init gpmc bus + * Init GPMC for x16, MuxMode (SDRAM in x32). + * This code can only be executed from SRAM or SDRAM. + *****************************************************/ +void gpmc_init(void) +{ + /* putting a blanket check on GPMC based on ZeBu for now */ + gpmc_cfg = (struct gpmc *)GPMC_BASE; + +#ifdef CONFIG_CMD_NAND + const u32 *gpmc_config = NULL; + u32 base = 0; + u32 size = 0; +#endif + /* global settings */ + writel(0x00000008, &gpmc_cfg->sysconfig); + writel(0x00000100, &gpmc_cfg->irqstatus); + writel(0x00000100, &gpmc_cfg->irqenable); + writel(0x00000012, &gpmc_cfg->config); + /* + * Disable the GPMC0 config set by ROM code + */ + writel(0, &gpmc_cfg->cs[0].config7); + sdelay(1000); + +#ifdef CONFIG_CMD_NAND + gpmc_config = gpmc_m_nand; + + base = PISMO1_NAND_BASE; + size = PISMO1_NAND_SIZE; + enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size); +#endif +} diff --git a/arch/arm/cpu/armv7/am33xx/mux.c b/arch/arm/cpu/armv7/am33xx/mux.c new file mode 100644 index 0000000..2ded472 --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/mux.c @@ -0,0 +1,33 @@ +/* + * mux.c + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <asm/arch/mux.h> +#include <asm/arch/hardware.h> +#include <asm/io.h> + +/* + * Configure the pin mux for the module + */ +void configure_module_pin_mux(struct module_pin_mux *mod_pin_mux) +{ + int i; + + if (!mod_pin_mux) + return; + + for (i = 0; mod_pin_mux[i].reg_offset != -1; i++) + MUX_CFG(mod_pin_mux[i].val, mod_pin_mux[i].reg_offset); +} diff --git a/arch/arm/cpu/armv7/am33xx/sys_info.c b/arch/arm/cpu/armv7/am33xx/sys_info.c new file mode 100644 index 0000000..ac049ac --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/sys_info.c @@ -0,0 +1,129 @@ +/* + * sys_info.c + * + * System information functions + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * Derived from Beagle Board and 3430 SDP code by + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/cpu.h> +#include <asm/arch/clock.h> + +struct ctrl_stat *cstat = (struct ctrl_stat *)CTRL_BASE; + +/** + * get_cpu_rev(void) - extract rev info + */ +u32 get_cpu_rev(void) +{ + u32 id; + u32 rev; + + id = readl(DEVICE_ID); + rev = (id >> 28) & 0xff; + + return rev; +} + +/** + * get_cpu_type(void) - extract cpu info + */ +u32 get_cpu_type(void) +{ + u32 id = 0; + u32 partnum; + + id = readl(DEVICE_ID); + partnum = (id >> 12) & 0xffff; + + return partnum; +} + +/** + * get_board_rev() - setup to pass kernel board revision information + * returns:(bit[0-3] sub version, higher bit[7-4] is higher version) + */ +u32 get_board_rev(void) +{ + return BOARD_REV_ID; +} + +/** + * get_device_type(): tell if GP/HS/EMU/TST + */ +u32 get_device_type(void) +{ + int mode; + mode = readl(&cstat->statusreg) & (DEVICE_MASK); + return mode >>= 8; +} + +/** + * get_sysboot_value(void) - return SYS_BOOT[4:0] + */ +u32 get_sysboot_value(void) +{ + int mode; + mode = readl(&cstat->statusreg) & (SYSBOOT_MASK); + return mode; +} + +#ifdef CONFIG_DISPLAY_CPUINFO +/** + * Print CPU information + */ +int print_cpuinfo(void) +{ + char *cpu_s, *sec_s; + + switch (get_cpu_type()) { + case AM335X: + cpu_s = "AM335X"; + break; + case TI81XX: + cpu_s = "TI81XX"; + break; + default: + cpu_s = "Unknown cpu type"; + break; + } + + switch (get_device_type()) { + case TST_DEVICE: + sec_s = "TST"; + break; + case EMU_DEVICE: + sec_s = "EMU"; + break; + case HS_DEVICE: + sec_s = "HS"; + break; + case GP_DEVICE: + sec_s = "GP"; + break; + default: + sec_s = "?"; + } + + printf("%s-%s rev %d\n", cpu_s, sec_s, get_cpu_rev()); + + return 0; +} +#endif /* CONFIG_DISPLAY_CPUINFO */ diff --git a/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds b/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds new file mode 100644 index 0000000..b6a929f --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds @@ -0,0 +1,67 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * Aneesh V <aneesh@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\ + LENGTH = CONFIG_SPL_MAX_SIZE } +MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \ + LENGTH = CONFIG_SPL_BSS_MAX_SIZE } + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + .text : + { + __start = .; + arch/arm/cpu/armv7/start.o (.text) + *(.text*) + } >.sram + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram + + . = ALIGN(4); + .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram + + .u_boot_list : { + KEEP(*(SORT(.u_boot_list*))); + } >.sram + + . = ALIGN(4); + __image_copy_end = .; + _end = .; + + .bss : + { + . = ALIGN(4); + __bss_start = .; + *(.bss*) + . = ALIGN(4); + __bss_end = .; + } >.sdram +} diff --git a/arch/arm/cpu/armv7/at91/Makefile b/arch/arm/cpu/armv7/at91/Makefile new file mode 100644 index 0000000..040c67d --- /dev/null +++ b/arch/arm/cpu/armv7/at91/Makefile @@ -0,0 +1,52 @@ +# +# (C) Copyright 2000-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2013 +# Bo Shen <voice.shen@atmel.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS-$(CONFIG_SAMA5D3) += sama5d3_devices.o +COBJS-y += clock.o +COBJS-y += cpu.o +COBJS-y += reset.o +COBJS-y += timer.o + +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/at91/clock.c b/arch/arm/cpu/armv7/at91/clock.c new file mode 100644 index 0000000..624b52c --- /dev/null +++ b/arch/arm/cpu/armv7/at91/clock.c @@ -0,0 +1,125 @@ +/* + * [origin: Linux kernel linux/arch/arm/mach-at91/clock.c] + * + * Copyright (C) 2005 David Brownell + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * Copyright (C) 2013 Bo Shen <voice.shen@atmel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/clk.h> + +#if !defined(CONFIG_AT91FAMILY) +# error You need to define CONFIG_AT91FAMILY in your board config! +#endif + +DECLARE_GLOBAL_DATA_PTR; + +static unsigned long at91_css_to_rate(unsigned long css) +{ + switch (css) { + case AT91_PMC_MCKR_CSS_SLOW: + return CONFIG_SYS_AT91_SLOW_CLOCK; + case AT91_PMC_MCKR_CSS_MAIN: + return gd->arch.main_clk_rate_hz; + case AT91_PMC_MCKR_CSS_PLLA: + return gd->arch.plla_rate_hz; + } + + return 0; +} + +static u32 at91_pll_rate(u32 freq, u32 reg) +{ + unsigned mul, div; + + div = reg & 0xff; + mul = (reg >> 18) & 0x7f; + if (div && mul) { + freq /= div; + freq *= mul + 1; + } else { + freq = 0; + } + + return freq; +} + +int at91_clock_init(unsigned long main_clock) +{ + unsigned freq, mckr; + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; +#ifndef CONFIG_SYS_AT91_MAIN_CLOCK + unsigned tmp; + /* + * When the bootloader initialized the main oscillator correctly, + * there's no problem using the cycle counter. But if it didn't, + * or when using oscillator bypass mode, we must be told the speed + * of the main clock. + */ + if (!main_clock) { + do { + tmp = readl(&pmc->mcfr); + } while (!(tmp & AT91_PMC_MCFR_MAINRDY)); + tmp &= AT91_PMC_MCFR_MAINF_MASK; + main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16); + } +#endif + gd->arch.main_clk_rate_hz = main_clock; + + /* report if PLLA is more than mildly overclocked */ + gd->arch.plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar)); + + /* + * MCK and CPU derive from one of those primary clocks. + * For now, assume this parentage won't change. + */ + mckr = readl(&pmc->mckr); + + /* plla divisor by 2 */ + if (mckr & (1 << 12)) + gd->arch.plla_rate_hz >>= 1; + + gd->arch.mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK); + freq = gd->arch.mck_rate_hz; + + /* prescale */ + freq >>= mckr & AT91_PMC_MCKR_PRES_MASK; + + switch (mckr & AT91_PMC_MCKR_MDIV_MASK) { + case AT91_PMC_MCKR_MDIV_2: + gd->arch.mck_rate_hz = freq / 2; + break; + case AT91_PMC_MCKR_MDIV_3: + gd->arch.mck_rate_hz = freq / 3; + break; + case AT91_PMC_MCKR_MDIV_4: + gd->arch.mck_rate_hz = freq / 4; + break; + default: + break; + } + + gd->arch.cpu_clk_rate_hz = freq; + + return 0; +} + +void at91_periph_clk_enable(int id) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + if (id > 31) + writel(1 << (id - 32), &pmc->pcer1); + else + writel(1 << id, &pmc->pcer); +} diff --git a/arch/arm/cpu/armv7/at91/cpu.c b/arch/arm/cpu/armv7/at91/cpu.c new file mode 100644 index 0000000..3df6143 --- /dev/null +++ b/arch/arm/cpu/armv7/at91/cpu.c @@ -0,0 +1,90 @@ +/* + * (C) Copyright 2010 + * Reinhard Meyer, reinhard.meyer@emk-elektronik.de + * (C) Copyright 2009 + * Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * (C) Copyright 2013 + * Bo Shen <voice.shen@atmel.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/at91_dbu.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_pit.h> +#include <asm/arch/at91_gpbr.h> +#include <asm/arch/clk.h> + +#ifndef CONFIG_SYS_AT91_MAIN_CLOCK +#define CONFIG_SYS_AT91_MAIN_CLOCK 0 +#endif + +int arch_cpu_init(void) +{ + return at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK); +} + +void arch_preboot_os(void) +{ + ulong cpiv; + at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT; + + cpiv = AT91_PIT_MR_PIV_MASK(readl(&pit->piir)); + + /* + * Disable PITC + * Add 0x1000 to current counter to stop it faster + * without waiting for wrapping back to 0 + */ + writel(cpiv + 0x1000, &pit->mr); +} + +#if defined(CONFIG_DISPLAY_CPUINFO) +int print_cpuinfo(void) +{ + char buf[32]; + + printf("CPU: %s\n", get_cpu_name()); + printf("Crystal frequency: %8s MHz\n", + strmhz(buf, get_main_clk_rate())); + printf("CPU clock : %8s MHz\n", + strmhz(buf, get_cpu_clk_rate())); + printf("Master clock : %8s MHz\n", + strmhz(buf, get_mck_clk_rate())); + + return 0; +} +#endif + +void enable_caches(void) +{ +} + +unsigned int get_chip_id(void) +{ + return readl(ATMEL_BASE_DBGU + AT91_DBU_CIDR) & ~AT91_DBU_CIDR_MASK; +} + +unsigned int get_extension_chip_id(void) +{ + return readl(ATMEL_BASE_DBGU + AT91_DBU_EXID); +} diff --git a/arch/arm/cpu/armv7/at91/reset.c b/arch/arm/cpu/armv7/at91/reset.c new file mode 100644 index 0000000..b9f83d9 --- /dev/null +++ b/arch/arm/cpu/armv7/at91/reset.c @@ -0,0 +1,47 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian@popies.net> + * Lead Tech Design <www.leadtechdesign.com> + * + * (C) Copyright 2013 + * Bo Shen <voice.shen@atmel.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/at91_rstc.h> + +/* Reset the cpu by telling the reset controller to do so */ +void reset_cpu(ulong ignored) +{ + at91_rstc_t *rstc = (at91_rstc_t *)ATMEL_BASE_RSTC; + + writel(AT91_RSTC_KEY + | AT91_RSTC_CR_PROCRST /* Processor Reset */ + | AT91_RSTC_CR_PERRST /* Peripheral Reset */ +#ifdef CONFIG_AT91RESET_EXTRST + | AT91_RSTC_CR_EXTRST /* External Reset (assert nRST pin) */ +#endif + , &rstc->cr); + /* never reached */ + do { } while (1); +} diff --git a/arch/arm/cpu/armv7/at91/sama5d3_devices.c b/arch/arm/cpu/armv7/at91/sama5d3_devices.c new file mode 100644 index 0000000..acf8b43 --- /dev/null +++ b/arch/arm/cpu/armv7/at91/sama5d3_devices.c @@ -0,0 +1,196 @@ +/* + * Copyright (C) 2012-2013 Atmel Corporation + * Bo Shen <voice.shen@atmel.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/sama5d3.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/clk.h> +#include <asm/arch/gpio.h> +#include <asm/io.h> + +unsigned int has_emac() +{ + return cpu_is_sama5d31() || cpu_is_sama5d35(); +} + +unsigned int has_gmac() +{ + return !cpu_is_sama5d31(); +} + +unsigned int has_lcdc() +{ + return !cpu_is_sama5d35(); +} + +char *get_cpu_name() +{ + unsigned int extension_id = get_extension_chip_id(); + + if (cpu_is_sama5d3()) + switch (extension_id) { + case ARCH_EXID_SAMA5D31: + return "SAMA5D31"; + case ARCH_EXID_SAMA5D33: + return "SAMA5D33"; + case ARCH_EXID_SAMA5D34: + return "SAMA5D34"; + case ARCH_EXID_SAMA5D35: + return "SAMA5D35"; + default: + return "Unknown CPU type"; + } + else + return "Unknown CPU type"; +} + +void at91_serial0_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTD, 18, 1); /* TXD0 */ + at91_set_a_periph(AT91_PIO_PORTD, 17, 0); /* RXD0 */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_USART0); +} + +void at91_serial1_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTB, 29, 1); /* TXD1 */ + at91_set_a_periph(AT91_PIO_PORTB, 28, 0); /* RXD1 */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_USART1); +} + +void at91_serial2_hw_init(void) +{ + at91_set_b_periph(AT91_PIO_PORTE, 26, 1); /* TXD2 */ + at91_set_b_periph(AT91_PIO_PORTE, 25, 0); /* RXD2 */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_USART2); +} + +void at91_seriald_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTB, 31, 1); /* DTXD */ + at91_set_a_periph(AT91_PIO_PORTB, 30, 0); /* DRXD */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_SYS); +} + +#if defined(CONFIG_ATMEL_SPI) +void at91_spi0_hw_init(unsigned long cs_mask) +{ + at91_set_a_periph(AT91_PIO_PORTD, 10, 0); /* SPI0_MISO */ + at91_set_a_periph(AT91_PIO_PORTD, 11, 0); /* SPI0_MOSI */ + at91_set_a_periph(AT91_PIO_PORTD, 12, 0); /* SPI0_SPCK */ + + if (cs_mask & (1 << 0)) + at91_set_pio_output(AT91_PIO_PORTD, 13, 1); + if (cs_mask & (1 << 1)) + at91_set_pio_output(AT91_PIO_PORTD, 14, 1); + if (cs_mask & (1 << 2)) + at91_set_pio_output(AT91_PIO_PORTD, 15, 1); + if (cs_mask & (1 << 3)) + at91_set_pio_output(AT91_PIO_PORTD, 16, 1); + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_SPI0); +} +#endif + +#ifdef CONFIG_GENERIC_ATMEL_MCI +void at91_mci_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTD, 0, 0); /* MCI0 CMD */ + at91_set_a_periph(AT91_PIO_PORTD, 1, 0); /* MCI0 DA0 */ + at91_set_a_periph(AT91_PIO_PORTD, 2, 0); /* MCI0 DA1 */ + at91_set_a_periph(AT91_PIO_PORTD, 3, 0); /* MCI0 DA2 */ + at91_set_a_periph(AT91_PIO_PORTD, 4, 0); /* MCI0 DA3 */ +#ifdef CONFIG_ATMEL_MCI_8BIT + at91_set_a_periph(AT91_PIO_PORTD, 5, 0); /* MCI0 DA4 */ + at91_set_a_periph(AT91_PIO_PORTD, 6, 0); /* MCI0 DA5 */ + at91_set_a_periph(AT91_PIO_PORTD, 7, 0); /* MCI0 DA6 */ + at91_set_a_periph(AT91_PIO_PORTD, 8, 0); /* MCI0 DA7 */ +#endif + at91_set_a_periph(AT91_PIO_PORTD, 9, 0); /* MCI0 CLK */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_MCI0); +} +#endif + +#ifdef CONFIG_MACB +void at91_macb_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* ETXCK_EREFCK */ + at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* ERXDV */ + at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* ERX0 */ + at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* ERX1 */ + at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* ERXER */ + at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* ETXEN */ + at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* ETX0 */ + at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* ETX1 */ + at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* EMDIO */ + at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* EMDC */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_EMAC); +} +#endif + +#ifdef CONFIG_LCD +void at91_lcd_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */ + at91_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */ + at91_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */ + at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */ + at91_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */ + at91_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */ + + /* The lower 16-bit of LCD only available on Port A */ + at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */ + at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */ + at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */ + at91_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */ + at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */ + at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */ + at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */ + at91_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */ + at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD8 */ + at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD9 */ + at91_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */ + at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */ + at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */ + at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */ + at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */ + at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_LCDC); +} +#endif diff --git a/arch/arm/cpu/armv7/at91/timer.c b/arch/arm/cpu/armv7/at91/timer.c new file mode 100644 index 0000000..b3a450f --- /dev/null +++ b/arch/arm/cpu/armv7/at91/timer.c @@ -0,0 +1,139 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian@popies.net> + * Lead Tech Design <www.leadtechdesign.com> + * + * (C) Copyright 2013 + * Bo Shen <voice.shen@atmel.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/at91_pit.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/clk.h> +#include <div64.h> + +#if !defined(CONFIG_AT91FAMILY) +# error You need to define CONFIG_AT91FAMILY in your board config! +#endif + +DECLARE_GLOBAL_DATA_PTR; + +/* + * We're using the SAMA5D3x PITC in 32 bit mode, by + * setting the 20 bit counter period to its maximum (0xfffff). + * (See the relevant data sheets to understand that this really works) + * + * We do also mimic the typical powerpc way of incrementing + * two 32 bit registers called tbl and tbu. + * + * Those registers increment at 1/16 the main clock rate. + */ + +#define TIMER_LOAD_VAL 0xfffff + +static inline unsigned long long tick_to_time(unsigned long long tick) +{ + tick *= CONFIG_SYS_HZ; + do_div(tick, gd->arch.timer_rate_hz); + + return tick; +} + +static inline unsigned long long usec_to_tick(unsigned long long usec) +{ + usec *= gd->arch.timer_rate_hz; + do_div(usec, 1000000); + + return usec; +} + +/* + * Use the PITC in full 32 bit incrementing mode + */ +int timer_init(void) +{ + at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT; + + /* Enable PITC Clock */ + at91_periph_clk_enable(ATMEL_ID_SYS); + + /* Enable PITC */ + writel(TIMER_LOAD_VAL | AT91_PIT_MR_EN , &pit->mr); + + gd->arch.timer_rate_hz = gd->arch.mck_rate_hz / 16; + gd->arch.tbu = 0; + gd->arch.tbl = 0; + + return 0; +} + +/* + * Get the current 64 bit timer tick count + */ +unsigned long long get_ticks(void) +{ + at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT; + + ulong now = readl(&pit->piir); + + /* increment tbu if tbl has rolled over */ + if (now < gd->arch.tbl) + gd->arch.tbu++; + gd->arch.tbl = now; + return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl; +} + +void __udelay(unsigned long usec) +{ + unsigned long long start; + ulong tmo; + + start = get_ticks(); /* get current timestamp */ + tmo = usec_to_tick(usec); /* convert usecs to ticks */ + while ((get_ticks() - start) < tmo) + ; /* loop till time has passed */ +} + +/* + * get_timer(base) can be used to check for timeouts or + * to measure elasped time relative to an event: + * + * ulong start_time = get_timer(0) sets start_time to the current + * time value. + * get_timer(start_time) returns the time elapsed since then. + * + * The time is used in CONFIG_SYS_HZ units! + */ +ulong get_timer(ulong base) +{ + return tick_to_time(get_ticks()) - base; +} + +/* + * Return the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + return gd->arch.timer_rate_hz; +} diff --git a/arch/arm/cpu/armv7/cache_v7.c b/arch/arm/cpu/armv7/cache_v7.c new file mode 100644 index 0000000..8748c14 --- /dev/null +++ b/arch/arm/cpu/armv7/cache_v7.c @@ -0,0 +1,410 @@ +/* + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * Aneesh V <aneesh@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <linux/types.h> +#include <common.h> +#include <asm/armv7.h> +#include <asm/utils.h> + +#define ARMV7_DCACHE_INVAL_ALL 1 +#define ARMV7_DCACHE_CLEAN_INVAL_ALL 2 +#define ARMV7_DCACHE_INVAL_RANGE 3 +#define ARMV7_DCACHE_CLEAN_INVAL_RANGE 4 + +#ifndef CONFIG_SYS_DCACHE_OFF +/* + * Write the level and type you want to Cache Size Selection Register(CSSELR) + * to get size details from Current Cache Size ID Register(CCSIDR) + */ +static void set_csselr(u32 level, u32 type) +{ u32 csselr = level << 1 | type; + + /* Write to Cache Size Selection Register(CSSELR) */ + asm volatile ("mcr p15, 2, %0, c0, c0, 0" : : "r" (csselr)); +} + +static u32 get_ccsidr(void) +{ + u32 ccsidr; + + /* Read current CP15 Cache Size ID Register */ + asm volatile ("mrc p15, 1, %0, c0, c0, 0" : "=r" (ccsidr)); + return ccsidr; +} + +static u32 get_clidr(void) +{ + u32 clidr; + + /* Read current CP15 Cache Level ID Register */ + asm volatile ("mrc p15,1,%0,c0,c0,1" : "=r" (clidr)); + return clidr; +} + +static void v7_inval_dcache_level_setway(u32 level, u32 num_sets, + u32 num_ways, u32 way_shift, + u32 log2_line_len) +{ + int way, set, setway; + + /* + * For optimal assembly code: + * a. count down + * b. have bigger loop inside + */ + for (way = num_ways - 1; way >= 0 ; way--) { + for (set = num_sets - 1; set >= 0; set--) { + setway = (level << 1) | (set << log2_line_len) | + (way << way_shift); + /* Invalidate data/unified cache line by set/way */ + asm volatile (" mcr p15, 0, %0, c7, c6, 2" + : : "r" (setway)); + } + } + /* DSB to make sure the operation is complete */ + CP15DSB; +} + +static void v7_clean_inval_dcache_level_setway(u32 level, u32 num_sets, + u32 num_ways, u32 way_shift, + u32 log2_line_len) +{ + int way, set, setway; + + /* + * For optimal assembly code: + * a. count down + * b. have bigger loop inside + */ + for (way = num_ways - 1; way >= 0 ; way--) { + for (set = num_sets - 1; set >= 0; set--) { + setway = (level << 1) | (set << log2_line_len) | + (way << way_shift); + /* + * Clean & Invalidate data/unified + * cache line by set/way + */ + asm volatile (" mcr p15, 0, %0, c7, c14, 2" + : : "r" (setway)); + } + } + /* DSB to make sure the operation is complete */ + CP15DSB; +} + +static void v7_maint_dcache_level_setway(u32 level, u32 operation) +{ + u32 ccsidr; + u32 num_sets, num_ways, log2_line_len, log2_num_ways; + u32 way_shift; + + set_csselr(level, ARMV7_CSSELR_IND_DATA_UNIFIED); + + ccsidr = get_ccsidr(); + + log2_line_len = ((ccsidr & CCSIDR_LINE_SIZE_MASK) >> + CCSIDR_LINE_SIZE_OFFSET) + 2; + /* Converting from words to bytes */ + log2_line_len += 2; + + num_ways = ((ccsidr & CCSIDR_ASSOCIATIVITY_MASK) >> + CCSIDR_ASSOCIATIVITY_OFFSET) + 1; + num_sets = ((ccsidr & CCSIDR_NUM_SETS_MASK) >> + CCSIDR_NUM_SETS_OFFSET) + 1; + /* + * According to ARMv7 ARM number of sets and number of ways need + * not be a power of 2 + */ + log2_num_ways = log_2_n_round_up(num_ways); + + way_shift = (32 - log2_num_ways); + if (operation == ARMV7_DCACHE_INVAL_ALL) { + v7_inval_dcache_level_setway(level, num_sets, num_ways, + way_shift, log2_line_len); + } else if (operation == ARMV7_DCACHE_CLEAN_INVAL_ALL) { + v7_clean_inval_dcache_level_setway(level, num_sets, num_ways, + way_shift, log2_line_len); + } +} + +static void v7_maint_dcache_all(u32 operation) +{ + u32 level, cache_type, level_start_bit = 0; + + u32 clidr = get_clidr(); + + for (level = 0; level < 7; level++) { + cache_type = (clidr >> level_start_bit) & 0x7; + if ((cache_type == ARMV7_CLIDR_CTYPE_DATA_ONLY) || + (cache_type == ARMV7_CLIDR_CTYPE_INSTRUCTION_DATA) || + (cache_type == ARMV7_CLIDR_CTYPE_UNIFIED)) + v7_maint_dcache_level_setway(level, operation); + level_start_bit += 3; + } +} + +static void v7_dcache_clean_inval_range(u32 start, + u32 stop, u32 line_len) +{ + u32 mva; + + /* Align start to cache line boundary */ + start &= ~(line_len - 1); + for (mva = start; mva < stop; mva = mva + line_len) { + /* DCCIMVAC - Clean & Invalidate data cache by MVA to PoC */ + asm volatile ("mcr p15, 0, %0, c7, c14, 1" : : "r" (mva)); + } +} + +static void v7_dcache_inval_range(u32 start, u32 stop, u32 line_len) +{ + u32 mva; + + /* + * If start address is not aligned to cache-line do not + * invalidate the first cache-line + */ + if (start & (line_len - 1)) { + printf("ERROR: %s - start address is not aligned - 0x%08x\n", + __func__, start); + /* move to next cache line */ + start = (start + line_len - 1) & ~(line_len - 1); + } + + /* + * If stop address is not aligned to cache-line do not + * invalidate the last cache-line + */ + if (stop & (line_len - 1)) { + printf("ERROR: %s - stop address is not aligned - 0x%08x\n", + __func__, stop); + /* align to the beginning of this cache line */ + stop &= ~(line_len - 1); + } + + for (mva = start; mva < stop; mva = mva + line_len) { + /* DCIMVAC - Invalidate data cache by MVA to PoC */ + asm volatile ("mcr p15, 0, %0, c7, c6, 1" : : "r" (mva)); + } +} + +static void v7_dcache_maint_range(u32 start, u32 stop, u32 range_op) +{ + u32 line_len, ccsidr; + + ccsidr = get_ccsidr(); + line_len = ((ccsidr & CCSIDR_LINE_SIZE_MASK) >> + CCSIDR_LINE_SIZE_OFFSET) + 2; + /* Converting from words to bytes */ + line_len += 2; + /* converting from log2(linelen) to linelen */ + line_len = 1 << line_len; + + switch (range_op) { + case ARMV7_DCACHE_CLEAN_INVAL_RANGE: + v7_dcache_clean_inval_range(start, stop, line_len); + break; + case ARMV7_DCACHE_INVAL_RANGE: + v7_dcache_inval_range(start, stop, line_len); + break; + } + + /* DSB to make sure the operation is complete */ + CP15DSB; +} + +/* Invalidate TLB */ +static void v7_inval_tlb(void) +{ + /* Invalidate entire unified TLB */ + asm volatile ("mcr p15, 0, %0, c8, c7, 0" : : "r" (0)); + /* Invalidate entire data TLB */ + asm volatile ("mcr p15, 0, %0, c8, c6, 0" : : "r" (0)); + /* Invalidate entire instruction TLB */ + asm volatile ("mcr p15, 0, %0, c8, c5, 0" : : "r" (0)); + /* Full system DSB - make sure that the invalidation is complete */ + CP15DSB; + /* Full system ISB - make sure the instruction stream sees it */ + CP15ISB; +} + +void invalidate_dcache_all(void) +{ + v7_maint_dcache_all(ARMV7_DCACHE_INVAL_ALL); + + v7_outer_cache_inval_all(); +} + +/* + * Performs a clean & invalidation of the entire data cache + * at all levels + */ +void flush_dcache_all(void) +{ + v7_maint_dcache_all(ARMV7_DCACHE_CLEAN_INVAL_ALL); + + v7_outer_cache_flush_all(); +} + +/* + * Invalidates range in all levels of D-cache/unified cache used: + * Affects the range [start, stop - 1] + */ +void invalidate_dcache_range(unsigned long start, unsigned long stop) +{ + + v7_dcache_maint_range(start, stop, ARMV7_DCACHE_INVAL_RANGE); + + v7_outer_cache_inval_range(start, stop); +} + +/* + * Flush range(clean & invalidate) from all levels of D-cache/unified + * cache used: + * Affects the range [start, stop - 1] + */ +void flush_dcache_range(unsigned long start, unsigned long stop) +{ + v7_dcache_maint_range(start, stop, ARMV7_DCACHE_CLEAN_INVAL_RANGE); + + v7_outer_cache_flush_range(start, stop); +} + +void arm_init_before_mmu(void) +{ + v7_outer_cache_enable(); + invalidate_dcache_all(); + v7_inval_tlb(); +} + +void mmu_page_table_flush(unsigned long start, unsigned long stop) +{ + flush_dcache_range(start, stop); + v7_inval_tlb(); +} + +/* + * Flush range from all levels of d-cache/unified-cache used: + * Affects the range [start, start + size - 1] + */ +void flush_cache(unsigned long start, unsigned long size) +{ + flush_dcache_range(start, start + size); +} +#else /* #ifndef CONFIG_SYS_DCACHE_OFF */ +void invalidate_dcache_all(void) +{ +} + +void flush_dcache_all(void) +{ +} + +void invalidate_dcache_range(unsigned long start, unsigned long stop) +{ +} + +void flush_dcache_range(unsigned long start, unsigned long stop) +{ +} + +void arm_init_before_mmu(void) +{ +} + +void flush_cache(unsigned long start, unsigned long size) +{ +} + +void mmu_page_table_flush(unsigned long start, unsigned long stop) +{ +} + +void arm_init_domains(void) +{ +} +#endif /* #ifndef CONFIG_SYS_DCACHE_OFF */ + +#ifndef CONFIG_SYS_ICACHE_OFF +/* Invalidate entire I-cache and branch predictor array */ +void invalidate_icache_all(void) +{ + /* + * Invalidate all instruction caches to PoU. + * Also flushes branch target cache. + */ + asm volatile ("mcr p15, 0, %0, c7, c5, 0" : : "r" (0)); + + /* Invalidate entire branch predictor array */ + asm volatile ("mcr p15, 0, %0, c7, c5, 6" : : "r" (0)); + + /* Full system DSB - make sure that the invalidation is complete */ + CP15DSB; + + /* ISB - make sure the instruction stream sees it */ + CP15ISB; +} +#else +void invalidate_icache_all(void) +{ +} +#endif + +/* + * Stub implementations for outer cache operations + */ +void __v7_outer_cache_enable(void) +{ +} +void v7_outer_cache_enable(void) + __attribute__((weak, alias("__v7_outer_cache_enable"))); + +void __v7_outer_cache_disable(void) +{ +} +void v7_outer_cache_disable(void) + __attribute__((weak, alias("__v7_outer_cache_disable"))); + +void __v7_outer_cache_flush_all(void) +{ +} +void v7_outer_cache_flush_all(void) + __attribute__((weak, alias("__v7_outer_cache_flush_all"))); + +void __v7_outer_cache_inval_all(void) +{ +} +void v7_outer_cache_inval_all(void) + __attribute__((weak, alias("__v7_outer_cache_inval_all"))); + +void __v7_outer_cache_flush_range(u32 start, u32 end) +{ +} +void v7_outer_cache_flush_range(u32 start, u32 end) + __attribute__((weak, alias("__v7_outer_cache_flush_range"))); + +void __v7_outer_cache_inval_range(u32 start, u32 end) +{ +} +void v7_outer_cache_inval_range(u32 start, u32 end) + __attribute__((weak, alias("__v7_outer_cache_inval_range"))); diff --git a/arch/arm/cpu/armv7/config.mk b/arch/arm/cpu/armv7/config.mk new file mode 100644 index 0000000..56b8053 --- /dev/null +++ b/arch/arm/cpu/armv7/config.mk @@ -0,0 +1,50 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float + +# If armv7-a is not supported by GCC fall-back to armv5, which is +# supported by more tool-chains +PF_CPPFLAGS_ARMV7 := $(call cc-option, -march=armv7-a, -march=armv5) +PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_ARMV7) + +# ========================================================================= +# +# Supply options according to compiler version +# +# ========================================================================= +PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) +PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT) + +# SEE README.arm-unaligned-accesses +PF_NO_UNALIGNED := $(call cc-option, -mno-unaligned-access,) +PLATFORM_NO_UNALIGNED := $(PF_NO_UNALIGNED) + +ifneq ($(CONFIG_IMX_CONFIG),) +ifdef CONFIG_SPL +ifdef CONFIG_SPL_BUILD +ALL-y += $(OBJTREE)/SPL +endif +else +ALL-y += $(obj)u-boot.imx +endif +endif diff --git a/arch/arm/cpu/armv7/cpu.c b/arch/arm/cpu/armv7/cpu.c new file mode 100644 index 0000000..39a8023 --- /dev/null +++ b/arch/arm/cpu/armv7/cpu.c @@ -0,0 +1,86 @@ +/* + * (C) Copyright 2008 Texas Insturments + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * CPU specific code + */ + +#include <common.h> +#include <command.h> +#include <asm/system.h> +#include <asm/cache.h> +#include <asm/armv7.h> +#include <linux/compiler.h> + +void __weak cpu_cache_initialization(void){} + +int cleanup_before_linux(void) +{ + /* + * this function is called just before we call linux + * it prepares the processor for linux + * + * we turn off caches etc ... + */ +#ifndef CONFIG_SPL_BUILD + disable_interrupts(); +#endif + + /* + * Turn off I-cache and invalidate it + */ + icache_disable(); + invalidate_icache_all(); + + /* + * turn off D-cache + * dcache_disable() in turn flushes the d-cache and disables MMU + */ + dcache_disable(); + v7_outer_cache_disable(); + + /* + * After D-cache is flushed and before it is disabled there may + * be some new valid entries brought into the cache. We are sure + * that these lines are not dirty and will not affect our execution. + * (because unwinding the call-stack and setting a bit in CP15 SCTRL + * is all we did during this. We have not pushed anything on to the + * stack. Neither have we affected any static data) + * So just invalidate the entire d-cache again to avoid coherency + * problems for kernel + */ + invalidate_dcache_all(); + + /* + * Some CPU need more cache attention before starting the kernel. + */ + cpu_cache_initialization(); + + return 0; +} diff --git a/arch/arm/cpu/armv7/exynos/Makefile b/arch/arm/cpu/armv7/exynos/Makefile new file mode 100644 index 0000000..4661155 --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/Makefile @@ -0,0 +1,51 @@ +# +# Copyright (C) 2009 Samsung Electronics +# Minkyu Kang <mk7.kang@samsung.com> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS-y += clock.o power.o soc.o system.o pinmux.o tzpc.o + +ifdef CONFIG_SPL_BUILD +COBJS-$(CONFIG_EXYNOS5) += clock_init_exynos5.o +COBJS-$(CONFIG_EXYNOS5) += dmc_common.o dmc_init_ddr3.o +COBJS-$(CONFIG_EXYNOS4210)+= dmc_init_exynos4.o clock_init_exynos4.o +COBJS-y += spl_boot.o +COBJS-y += lowlevel_init.o +endif + +COBJS := $(COBJS-y) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c new file mode 100644 index 0000000..5a5cfa1 --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/clock.c @@ -0,0 +1,1455 @@ +/* + * Copyright (C) 2010 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/clk.h> +#include <asm/arch/periph.h> + +#define PLL_DIV_1024 1024 +#define PLL_DIV_65535 65535 +#define PLL_DIV_65536 65536 + +/* * + * This structure is to store the src bit, div bit and prediv bit + * positions of the peripheral clocks of the src and div registers + */ +struct clk_bit_info { + int8_t src_bit; + int8_t div_bit; + int8_t prediv_bit; +}; + +/* src_bit div_bit prediv_bit */ +static struct clk_bit_info clk_bit_info[PERIPH_ID_COUNT] = { + {0, 0, -1}, + {4, 4, -1}, + {8, 8, -1}, + {12, 12, -1}, + {0, 0, 8}, + {4, 16, 24}, + {8, 0, 8}, + {12, 16, 24}, + {-1, -1, -1}, + {16, 0, 8}, + {20, 16, 24}, + {24, 0, 8}, + {0, 0, 4}, + {4, 12, 16}, + {-1, -1, -1}, + {-1, -1, -1}, + {-1, 24, 0}, + {-1, 24, 0}, + {-1, 24, 0}, + {-1, 24, 0}, + {-1, 24, 0}, + {-1, 24, 0}, + {-1, 24, 0}, + {-1, 24, 0}, + {24, 0, -1}, + {24, 0, -1}, + {24, 0, -1}, + {24, 0, -1}, + {24, 0, -1}, +}; + +/* Epll Clock division values to achive different frequency output */ +static struct set_epll_con_val exynos5_epll_div[] = { + { 192000000, 0, 48, 3, 1, 0 }, + { 180000000, 0, 45, 3, 1, 0 }, + { 73728000, 1, 73, 3, 3, 47710 }, + { 67737600, 1, 90, 4, 3, 20762 }, + { 49152000, 0, 49, 3, 3, 9961 }, + { 45158400, 0, 45, 3, 3, 10381 }, + { 180633600, 0, 45, 3, 1, 10381 } +}; + +/* exynos: return pll clock frequency */ +static int exynos_get_pll_clk(int pllreg, unsigned int r, unsigned int k) +{ + unsigned long m, p, s = 0, mask, fout; + unsigned int div; + unsigned int freq; + /* + * APLL_CON: MIDV [25:16] + * MPLL_CON: MIDV [25:16] + * EPLL_CON: MIDV [24:16] + * VPLL_CON: MIDV [24:16] + * BPLL_CON: MIDV [25:16]: Exynos5 + */ + if (pllreg == APLL || pllreg == MPLL || pllreg == BPLL) + mask = 0x3ff; + else + mask = 0x1ff; + + m = (r >> 16) & mask; + + /* PDIV [13:8] */ + p = (r >> 8) & 0x3f; + /* SDIV [2:0] */ + s = r & 0x7; + + freq = CONFIG_SYS_CLK_FREQ; + + if (pllreg == EPLL) { + k = k & 0xffff; + /* FOUT = (MDIV + K / 65536) * FIN / (PDIV * 2^SDIV) */ + fout = (m + k / PLL_DIV_65536) * (freq / (p * (1 << s))); + } else if (pllreg == VPLL) { + k = k & 0xfff; + + /* + * Exynos4210 + * FOUT = (MDIV + K / 1024) * FIN / (PDIV * 2^SDIV) + * + * Exynos4412 + * FOUT = (MDIV + K / 65535) * FIN / (PDIV * 2^SDIV) + * + * Exynos5250 + * FOUT = (MDIV + K / 65536) * FIN / (PDIV * 2^SDIV) + */ + if (proid_is_exynos4210()) + div = PLL_DIV_1024; + else if (proid_is_exynos4412()) + div = PLL_DIV_65535; + else if (proid_is_exynos5250()) + div = PLL_DIV_65536; + else + return 0; + + fout = (m + k / div) * (freq / (p * (1 << s))); + } else { + /* + * Exynos4412 / Exynos5250 + * FOUT = MDIV * FIN / (PDIV * 2^SDIV) + * + * Exynos4210 + * FOUT = MDIV * FIN / (PDIV * 2^(SDIV-1)) + */ + if (proid_is_exynos4210()) + fout = m * (freq / (p * (1 << (s - 1)))); + else + fout = m * (freq / (p * (1 << s))); + } + return fout; +} + +/* exynos4: return pll clock frequency */ +static unsigned long exynos4_get_pll_clk(int pllreg) +{ + struct exynos4_clock *clk = + (struct exynos4_clock *)samsung_get_base_clock(); + unsigned long r, k = 0; + + switch (pllreg) { + case APLL: + r = readl(&clk->apll_con0); + break; + case MPLL: + r = readl(&clk->mpll_con0); + break; + case EPLL: + r = readl(&clk->epll_con0); + k = readl(&clk->epll_con1); + break; + case VPLL: + r = readl(&clk->vpll_con0); + k = readl(&clk->vpll_con1); + break; + default: + printf("Unsupported PLL (%d)\n", pllreg); + return 0; + } + + return exynos_get_pll_clk(pllreg, r, k); +} + +/* exynos4x12: return pll clock frequency */ +static unsigned long exynos4x12_get_pll_clk(int pllreg) +{ + struct exynos4x12_clock *clk = + (struct exynos4x12_clock *)samsung_get_base_clock(); + unsigned long r, k = 0; + + switch (pllreg) { + case APLL: + r = readl(&clk->apll_con0); + break; + case MPLL: + r = readl(&clk->mpll_con0); + break; + case EPLL: + r = readl(&clk->epll_con0); + k = readl(&clk->epll_con1); + break; + case VPLL: + r = readl(&clk->vpll_con0); + k = readl(&clk->vpll_con1); + break; + default: + printf("Unsupported PLL (%d)\n", pllreg); + return 0; + } + + return exynos_get_pll_clk(pllreg, r, k); +} + +/* exynos5: return pll clock frequency */ +static unsigned long exynos5_get_pll_clk(int pllreg) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + unsigned long r, k = 0, fout; + unsigned int pll_div2_sel, fout_sel; + + switch (pllreg) { + case APLL: + r = readl(&clk->apll_con0); + break; + case MPLL: + r = readl(&clk->mpll_con0); + break; + case EPLL: + r = readl(&clk->epll_con0); + k = readl(&clk->epll_con1); + break; + case VPLL: + r = readl(&clk->vpll_con0); + k = readl(&clk->vpll_con1); + break; + case BPLL: + r = readl(&clk->bpll_con0); + break; + default: + printf("Unsupported PLL (%d)\n", pllreg); + return 0; + } + + fout = exynos_get_pll_clk(pllreg, r, k); + + /* According to the user manual, in EVT1 MPLL and BPLL always gives + * 1.6GHz clock, so divide by 2 to get 800MHz MPLL clock.*/ + if (pllreg == MPLL || pllreg == BPLL) { + pll_div2_sel = readl(&clk->pll_div2_sel); + + switch (pllreg) { + case MPLL: + fout_sel = (pll_div2_sel >> MPLL_FOUT_SEL_SHIFT) + & MPLL_FOUT_SEL_MASK; + break; + case BPLL: + fout_sel = (pll_div2_sel >> BPLL_FOUT_SEL_SHIFT) + & BPLL_FOUT_SEL_MASK; + break; + default: + fout_sel = -1; + break; + } + + if (fout_sel == 0) + fout /= 2; + } + + return fout; +} + +static unsigned long exynos5_get_periph_rate(int peripheral) +{ + struct clk_bit_info *bit_info = &clk_bit_info[peripheral]; + unsigned long sclk, sub_clk; + unsigned int src, div, sub_div; + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + + switch (peripheral) { + case PERIPH_ID_UART0: + case PERIPH_ID_UART1: + case PERIPH_ID_UART2: + case PERIPH_ID_UART3: + src = readl(&clk->src_peric0); + div = readl(&clk->div_peric0); + break; + case PERIPH_ID_PWM0: + case PERIPH_ID_PWM1: + case PERIPH_ID_PWM2: + case PERIPH_ID_PWM3: + case PERIPH_ID_PWM4: + src = readl(&clk->src_peric0); + div = readl(&clk->div_peric3); + break; + case PERIPH_ID_SPI0: + case PERIPH_ID_SPI1: + src = readl(&clk->src_peric1); + div = readl(&clk->div_peric1); + break; + case PERIPH_ID_SPI2: + src = readl(&clk->src_peric1); + div = readl(&clk->div_peric2); + break; + case PERIPH_ID_SPI3: + case PERIPH_ID_SPI4: + src = readl(&clk->sclk_src_isp); + div = readl(&clk->sclk_div_isp); + break; + case PERIPH_ID_SDMMC0: + case PERIPH_ID_SDMMC1: + case PERIPH_ID_SDMMC2: + case PERIPH_ID_SDMMC3: + src = readl(&clk->src_fsys); + div = readl(&clk->div_fsys1); + break; + case PERIPH_ID_I2C0: + case PERIPH_ID_I2C1: + case PERIPH_ID_I2C2: + case PERIPH_ID_I2C3: + case PERIPH_ID_I2C4: + case PERIPH_ID_I2C5: + case PERIPH_ID_I2C6: + case PERIPH_ID_I2C7: + sclk = exynos5_get_pll_clk(MPLL); + sub_div = ((readl(&clk->div_top1) >> bit_info->div_bit) + & 0x7) + 1; + div = ((readl(&clk->div_top0) >> bit_info->prediv_bit) + & 0x7) + 1; + return (sclk / sub_div) / div; + default: + debug("%s: invalid peripheral %d", __func__, peripheral); + return -1; + }; + + src = (src >> bit_info->src_bit) & 0xf; + + switch (src) { + case EXYNOS_SRC_MPLL: + sclk = exynos5_get_pll_clk(MPLL); + break; + case EXYNOS_SRC_EPLL: + sclk = exynos5_get_pll_clk(EPLL); + break; + case EXYNOS_SRC_VPLL: + sclk = exynos5_get_pll_clk(VPLL); + break; + default: + return 0; + } + + /* Ratio clock division for this peripheral */ + sub_div = (div >> bit_info->div_bit) & 0xf; + sub_clk = sclk / (sub_div + 1); + + /* Pre-ratio clock division for SDMMC0 and 2 */ + if (peripheral == PERIPH_ID_SDMMC0 || peripheral == PERIPH_ID_SDMMC2) { + div = (div >> bit_info->prediv_bit) & 0xff; + return sub_clk / (div + 1); + } + + return sub_clk; +} + +unsigned long clock_get_periph_rate(int peripheral) +{ + if (cpu_is_exynos5()) + return exynos5_get_periph_rate(peripheral); + else + return 0; +} + +/* exynos4: return ARM clock frequency */ +static unsigned long exynos4_get_arm_clk(void) +{ + struct exynos4_clock *clk = + (struct exynos4_clock *)samsung_get_base_clock(); + unsigned long div; + unsigned long armclk; + unsigned int core_ratio; + unsigned int core2_ratio; + + div = readl(&clk->div_cpu0); + + /* CORE_RATIO: [2:0], CORE2_RATIO: [30:28] */ + core_ratio = (div >> 0) & 0x7; + core2_ratio = (div >> 28) & 0x7; + + armclk = get_pll_clk(APLL) / (core_ratio + 1); + armclk /= (core2_ratio + 1); + + return armclk; +} + +/* exynos4x12: return ARM clock frequency */ +static unsigned long exynos4x12_get_arm_clk(void) +{ + struct exynos4x12_clock *clk = + (struct exynos4x12_clock *)samsung_get_base_clock(); + unsigned long div; + unsigned long armclk; + unsigned int core_ratio; + unsigned int core2_ratio; + + div = readl(&clk->div_cpu0); + + /* CORE_RATIO: [2:0], CORE2_RATIO: [30:28] */ + core_ratio = (div >> 0) & 0x7; + core2_ratio = (div >> 28) & 0x7; + + armclk = get_pll_clk(APLL) / (core_ratio + 1); + armclk /= (core2_ratio + 1); + + return armclk; +} + +/* exynos5: return ARM clock frequency */ +static unsigned long exynos5_get_arm_clk(void) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + unsigned long div; + unsigned long armclk; + unsigned int arm_ratio; + unsigned int arm2_ratio; + + div = readl(&clk->div_cpu0); + + /* ARM_RATIO: [2:0], ARM2_RATIO: [30:28] */ + arm_ratio = (div >> 0) & 0x7; + arm2_ratio = (div >> 28) & 0x7; + + armclk = get_pll_clk(APLL) / (arm_ratio + 1); + armclk /= (arm2_ratio + 1); + + return armclk; +} + +/* exynos4: return pwm clock frequency */ +static unsigned long exynos4_get_pwm_clk(void) +{ + struct exynos4_clock *clk = + (struct exynos4_clock *)samsung_get_base_clock(); + unsigned long pclk, sclk; + unsigned int sel; + unsigned int ratio; + + if (s5p_get_cpu_rev() == 0) { + /* + * CLK_SRC_PERIL0 + * PWM_SEL [27:24] + */ + sel = readl(&clk->src_peril0); + sel = (sel >> 24) & 0xf; + + if (sel == 0x6) + sclk = get_pll_clk(MPLL); + else if (sel == 0x7) + sclk = get_pll_clk(EPLL); + else if (sel == 0x8) + sclk = get_pll_clk(VPLL); + else + return 0; + + /* + * CLK_DIV_PERIL3 + * PWM_RATIO [3:0] + */ + ratio = readl(&clk->div_peril3); + ratio = ratio & 0xf; + } else if (s5p_get_cpu_rev() == 1) { + sclk = get_pll_clk(MPLL); + ratio = 8; + } else + return 0; + + pclk = sclk / (ratio + 1); + + return pclk; +} + +/* exynos4x12: return pwm clock frequency */ +static unsigned long exynos4x12_get_pwm_clk(void) +{ + unsigned long pclk, sclk; + unsigned int ratio; + + sclk = get_pll_clk(MPLL); + ratio = 8; + + pclk = sclk / (ratio + 1); + + return pclk; +} + +/* exynos4: return uart clock frequency */ +static unsigned long exynos4_get_uart_clk(int dev_index) +{ + struct exynos4_clock *clk = + (struct exynos4_clock *)samsung_get_base_clock(); + unsigned long uclk, sclk; + unsigned int sel; + unsigned int ratio; + + /* + * CLK_SRC_PERIL0 + * UART0_SEL [3:0] + * UART1_SEL [7:4] + * UART2_SEL [8:11] + * UART3_SEL [12:15] + * UART4_SEL [16:19] + * UART5_SEL [23:20] + */ + sel = readl(&clk->src_peril0); + sel = (sel >> (dev_index << 2)) & 0xf; + + if (sel == 0x6) + sclk = get_pll_clk(MPLL); + else if (sel == 0x7) + sclk = get_pll_clk(EPLL); + else if (sel == 0x8) + sclk = get_pll_clk(VPLL); + else + return 0; + + /* + * CLK_DIV_PERIL0 + * UART0_RATIO [3:0] + * UART1_RATIO [7:4] + * UART2_RATIO [8:11] + * UART3_RATIO [12:15] + * UART4_RATIO [16:19] + * UART5_RATIO [23:20] + */ + ratio = readl(&clk->div_peril0); + ratio = (ratio >> (dev_index << 2)) & 0xf; + + uclk = sclk / (ratio + 1); + + return uclk; +} + +/* exynos4x12: return uart clock frequency */ +static unsigned long exynos4x12_get_uart_clk(int dev_index) +{ + struct exynos4x12_clock *clk = + (struct exynos4x12_clock *)samsung_get_base_clock(); + unsigned long uclk, sclk; + unsigned int sel; + unsigned int ratio; + + /* + * CLK_SRC_PERIL0 + * UART0_SEL [3:0] + * UART1_SEL [7:4] + * UART2_SEL [8:11] + * UART3_SEL [12:15] + * UART4_SEL [16:19] + */ + sel = readl(&clk->src_peril0); + sel = (sel >> (dev_index << 2)) & 0xf; + + if (sel == 0x6) + sclk = get_pll_clk(MPLL); + else if (sel == 0x7) + sclk = get_pll_clk(EPLL); + else if (sel == 0x8) + sclk = get_pll_clk(VPLL); + else + return 0; + + /* + * CLK_DIV_PERIL0 + * UART0_RATIO [3:0] + * UART1_RATIO [7:4] + * UART2_RATIO [8:11] + * UART3_RATIO [12:15] + * UART4_RATIO [16:19] + */ + ratio = readl(&clk->div_peril0); + ratio = (ratio >> (dev_index << 2)) & 0xf; + + uclk = sclk / (ratio + 1); + + return uclk; +} + +/* exynos5: return uart clock frequency */ +static unsigned long exynos5_get_uart_clk(int dev_index) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + unsigned long uclk, sclk; + unsigned int sel; + unsigned int ratio; + + /* + * CLK_SRC_PERIC0 + * UART0_SEL [3:0] + * UART1_SEL [7:4] + * UART2_SEL [8:11] + * UART3_SEL [12:15] + * UART4_SEL [16:19] + * UART5_SEL [23:20] + */ + sel = readl(&clk->src_peric0); + sel = (sel >> (dev_index << 2)) & 0xf; + + if (sel == 0x6) + sclk = get_pll_clk(MPLL); + else if (sel == 0x7) + sclk = get_pll_clk(EPLL); + else if (sel == 0x8) + sclk = get_pll_clk(VPLL); + else + return 0; + + /* + * CLK_DIV_PERIC0 + * UART0_RATIO [3:0] + * UART1_RATIO [7:4] + * UART2_RATIO [8:11] + * UART3_RATIO [12:15] + * UART4_RATIO [16:19] + * UART5_RATIO [23:20] + */ + ratio = readl(&clk->div_peric0); + ratio = (ratio >> (dev_index << 2)) & 0xf; + + uclk = sclk / (ratio + 1); + + return uclk; +} + +static unsigned long exynos4_get_mmc_clk(int dev_index) +{ + struct exynos4_clock *clk = + (struct exynos4_clock *)samsung_get_base_clock(); + unsigned long uclk, sclk; + unsigned int sel, ratio, pre_ratio; + int shift = 0; + + sel = readl(&clk->src_fsys); + sel = (sel >> (dev_index << 2)) & 0xf; + + if (sel == 0x6) + sclk = get_pll_clk(MPLL); + else if (sel == 0x7) + sclk = get_pll_clk(EPLL); + else if (sel == 0x8) + sclk = get_pll_clk(VPLL); + else + return 0; + + switch (dev_index) { + case 0: + case 1: + ratio = readl(&clk->div_fsys1); + pre_ratio = readl(&clk->div_fsys1); + break; + case 2: + case 3: + ratio = readl(&clk->div_fsys2); + pre_ratio = readl(&clk->div_fsys2); + break; + case 4: + ratio = readl(&clk->div_fsys3); + pre_ratio = readl(&clk->div_fsys3); + break; + default: + return 0; + } + + if (dev_index == 1 || dev_index == 3) + shift = 16; + + ratio = (ratio >> shift) & 0xf; + pre_ratio = (pre_ratio >> (shift + 8)) & 0xff; + uclk = (sclk / (ratio + 1)) / (pre_ratio + 1); + + return uclk; +} + +static unsigned long exynos5_get_mmc_clk(int dev_index) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + unsigned long uclk, sclk; + unsigned int sel, ratio, pre_ratio; + int shift = 0; + + sel = readl(&clk->src_fsys); + sel = (sel >> (dev_index << 2)) & 0xf; + + if (sel == 0x6) + sclk = get_pll_clk(MPLL); + else if (sel == 0x7) + sclk = get_pll_clk(EPLL); + else if (sel == 0x8) + sclk = get_pll_clk(VPLL); + else + return 0; + + switch (dev_index) { + case 0: + case 1: + ratio = readl(&clk->div_fsys1); + pre_ratio = readl(&clk->div_fsys1); + break; + case 2: + case 3: + ratio = readl(&clk->div_fsys2); + pre_ratio = readl(&clk->div_fsys2); + break; + default: + return 0; + } + + if (dev_index == 1 || dev_index == 3) + shift = 16; + + ratio = (ratio >> shift) & 0xf; + pre_ratio = (pre_ratio >> (shift + 8)) & 0xff; + uclk = (sclk / (ratio + 1)) / (pre_ratio + 1); + + return uclk; +} + +/* exynos4: set the mmc clock */ +static void exynos4_set_mmc_clk(int dev_index, unsigned int div) +{ + struct exynos4_clock *clk = + (struct exynos4_clock *)samsung_get_base_clock(); + unsigned int addr; + unsigned int val; + + /* + * CLK_DIV_FSYS1 + * MMC0_PRE_RATIO [15:8], MMC1_PRE_RATIO [31:24] + * CLK_DIV_FSYS2 + * MMC2_PRE_RATIO [15:8], MMC3_PRE_RATIO [31:24] + * CLK_DIV_FSYS3 + * MMC4_PRE_RATIO [15:8] + */ + if (dev_index < 2) { + addr = (unsigned int)&clk->div_fsys1; + } else if (dev_index == 4) { + addr = (unsigned int)&clk->div_fsys3; + dev_index -= 4; + } else { + addr = (unsigned int)&clk->div_fsys2; + dev_index -= 2; + } + + val = readl(addr); + val &= ~(0xff << ((dev_index << 4) + 8)); + val |= (div & 0xff) << ((dev_index << 4) + 8); + writel(val, addr); +} + +/* exynos4x12: set the mmc clock */ +static void exynos4x12_set_mmc_clk(int dev_index, unsigned int div) +{ + struct exynos4x12_clock *clk = + (struct exynos4x12_clock *)samsung_get_base_clock(); + unsigned int addr; + unsigned int val; + + /* + * CLK_DIV_FSYS1 + * MMC0_PRE_RATIO [15:8], MMC1_PRE_RATIO [31:24] + * CLK_DIV_FSYS2 + * MMC2_PRE_RATIO [15:8], MMC3_PRE_RATIO [31:24] + */ + if (dev_index < 2) { + addr = (unsigned int)&clk->div_fsys1; + } else { + addr = (unsigned int)&clk->div_fsys2; + dev_index -= 2; + } + + val = readl(addr); + val &= ~(0xff << ((dev_index << 4) + 8)); + val |= (div & 0xff) << ((dev_index << 4) + 8); + writel(val, addr); +} + +/* exynos5: set the mmc clock */ +static void exynos5_set_mmc_clk(int dev_index, unsigned int div) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + unsigned int addr; + unsigned int val; + + /* + * CLK_DIV_FSYS1 + * MMC0_PRE_RATIO [15:8], MMC1_PRE_RATIO [31:24] + * CLK_DIV_FSYS2 + * MMC2_PRE_RATIO [15:8], MMC3_PRE_RATIO [31:24] + */ + if (dev_index < 2) { + addr = (unsigned int)&clk->div_fsys1; + } else { + addr = (unsigned int)&clk->div_fsys2; + dev_index -= 2; + } + + val = readl(addr); + val &= ~(0xff << ((dev_index << 4) + 8)); + val |= (div & 0xff) << ((dev_index << 4) + 8); + writel(val, addr); +} + +/* get_lcd_clk: return lcd clock frequency */ +static unsigned long exynos4_get_lcd_clk(void) +{ + struct exynos4_clock *clk = + (struct exynos4_clock *)samsung_get_base_clock(); + unsigned long pclk, sclk; + unsigned int sel; + unsigned int ratio; + + /* + * CLK_SRC_LCD0 + * FIMD0_SEL [3:0] + */ + sel = readl(&clk->src_lcd0); + sel = sel & 0xf; + + /* + * 0x6: SCLK_MPLL + * 0x7: SCLK_EPLL + * 0x8: SCLK_VPLL + */ + if (sel == 0x6) + sclk = get_pll_clk(MPLL); + else if (sel == 0x7) + sclk = get_pll_clk(EPLL); + else if (sel == 0x8) + sclk = get_pll_clk(VPLL); + else + return 0; + + /* + * CLK_DIV_LCD0 + * FIMD0_RATIO [3:0] + */ + ratio = readl(&clk->div_lcd0); + ratio = ratio & 0xf; + + pclk = sclk / (ratio + 1); + + return pclk; +} + +/* get_lcd_clk: return lcd clock frequency */ +static unsigned long exynos5_get_lcd_clk(void) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + unsigned long pclk, sclk; + unsigned int sel; + unsigned int ratio; + + /* + * CLK_SRC_LCD0 + * FIMD0_SEL [3:0] + */ + sel = readl(&clk->src_disp1_0); + sel = sel & 0xf; + + /* + * 0x6: SCLK_MPLL + * 0x7: SCLK_EPLL + * 0x8: SCLK_VPLL + */ + if (sel == 0x6) + sclk = get_pll_clk(MPLL); + else if (sel == 0x7) + sclk = get_pll_clk(EPLL); + else if (sel == 0x8) + sclk = get_pll_clk(VPLL); + else + return 0; + + /* + * CLK_DIV_LCD0 + * FIMD0_RATIO [3:0] + */ + ratio = readl(&clk->div_disp1_0); + ratio = ratio & 0xf; + + pclk = sclk / (ratio + 1); + + return pclk; +} + +void exynos4_set_lcd_clk(void) +{ + struct exynos4_clock *clk = + (struct exynos4_clock *)samsung_get_base_clock(); + unsigned int cfg = 0; + + /* + * CLK_GATE_BLOCK + * CLK_CAM [0] + * CLK_TV [1] + * CLK_MFC [2] + * CLK_G3D [3] + * CLK_LCD0 [4] + * CLK_LCD1 [5] + * CLK_GPS [7] + */ + cfg = readl(&clk->gate_block); + cfg |= 1 << 4; + writel(cfg, &clk->gate_block); + + /* + * CLK_SRC_LCD0 + * FIMD0_SEL [3:0] + * MDNIE0_SEL [7:4] + * MDNIE_PWM0_SEL [8:11] + * MIPI0_SEL [12:15] + * set lcd0 src clock 0x6: SCLK_MPLL + */ + cfg = readl(&clk->src_lcd0); + cfg &= ~(0xf); + cfg |= 0x6; + writel(cfg, &clk->src_lcd0); + + /* + * CLK_GATE_IP_LCD0 + * CLK_FIMD0 [0] + * CLK_MIE0 [1] + * CLK_MDNIE0 [2] + * CLK_DSIM0 [3] + * CLK_SMMUFIMD0 [4] + * CLK_PPMULCD0 [5] + * Gating all clocks for FIMD0 + */ + cfg = readl(&clk->gate_ip_lcd0); + cfg |= 1 << 0; + writel(cfg, &clk->gate_ip_lcd0); + + /* + * CLK_DIV_LCD0 + * FIMD0_RATIO [3:0] + * MDNIE0_RATIO [7:4] + * MDNIE_PWM0_RATIO [11:8] + * MDNIE_PWM_PRE_RATIO [15:12] + * MIPI0_RATIO [19:16] + * MIPI0_PRE_RATIO [23:20] + * set fimd ratio + */ + cfg &= ~(0xf); + cfg |= 0x1; + writel(cfg, &clk->div_lcd0); +} + +void exynos5_set_lcd_clk(void) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + unsigned int cfg = 0; + + /* + * CLK_GATE_BLOCK + * CLK_CAM [0] + * CLK_TV [1] + * CLK_MFC [2] + * CLK_G3D [3] + * CLK_LCD0 [4] + * CLK_LCD1 [5] + * CLK_GPS [7] + */ + cfg = readl(&clk->gate_block); + cfg |= 1 << 4; + writel(cfg, &clk->gate_block); + + /* + * CLK_SRC_LCD0 + * FIMD0_SEL [3:0] + * MDNIE0_SEL [7:4] + * MDNIE_PWM0_SEL [8:11] + * MIPI0_SEL [12:15] + * set lcd0 src clock 0x6: SCLK_MPLL + */ + cfg = readl(&clk->src_disp1_0); + cfg &= ~(0xf); + cfg |= 0x6; + writel(cfg, &clk->src_disp1_0); + + /* + * CLK_GATE_IP_LCD0 + * CLK_FIMD0 [0] + * CLK_MIE0 [1] + * CLK_MDNIE0 [2] + * CLK_DSIM0 [3] + * CLK_SMMUFIMD0 [4] + * CLK_PPMULCD0 [5] + * Gating all clocks for FIMD0 + */ + cfg = readl(&clk->gate_ip_disp1); + cfg |= 1 << 0; + writel(cfg, &clk->gate_ip_disp1); + + /* + * CLK_DIV_LCD0 + * FIMD0_RATIO [3:0] + * MDNIE0_RATIO [7:4] + * MDNIE_PWM0_RATIO [11:8] + * MDNIE_PWM_PRE_RATIO [15:12] + * MIPI0_RATIO [19:16] + * MIPI0_PRE_RATIO [23:20] + * set fimd ratio + */ + cfg &= ~(0xf); + cfg |= 0x0; + writel(cfg, &clk->div_disp1_0); +} + +void exynos4_set_mipi_clk(void) +{ + struct exynos4_clock *clk = + (struct exynos4_clock *)samsung_get_base_clock(); + unsigned int cfg = 0; + + /* + * CLK_SRC_LCD0 + * FIMD0_SEL [3:0] + * MDNIE0_SEL [7:4] + * MDNIE_PWM0_SEL [8:11] + * MIPI0_SEL [12:15] + * set mipi0 src clock 0x6: SCLK_MPLL + */ + cfg = readl(&clk->src_lcd0); + cfg &= ~(0xf << 12); + cfg |= (0x6 << 12); + writel(cfg, &clk->src_lcd0); + + /* + * CLK_SRC_MASK_LCD0 + * FIMD0_MASK [0] + * MDNIE0_MASK [4] + * MDNIE_PWM0_MASK [8] + * MIPI0_MASK [12] + * set src mask mipi0 0x1: Unmask + */ + cfg = readl(&clk->src_mask_lcd0); + cfg |= (0x1 << 12); + writel(cfg, &clk->src_mask_lcd0); + + /* + * CLK_GATE_IP_LCD0 + * CLK_FIMD0 [0] + * CLK_MIE0 [1] + * CLK_MDNIE0 [2] + * CLK_DSIM0 [3] + * CLK_SMMUFIMD0 [4] + * CLK_PPMULCD0 [5] + * Gating all clocks for MIPI0 + */ + cfg = readl(&clk->gate_ip_lcd0); + cfg |= 1 << 3; + writel(cfg, &clk->gate_ip_lcd0); + + /* + * CLK_DIV_LCD0 + * FIMD0_RATIO [3:0] + * MDNIE0_RATIO [7:4] + * MDNIE_PWM0_RATIO [11:8] + * MDNIE_PWM_PRE_RATIO [15:12] + * MIPI0_RATIO [19:16] + * MIPI0_PRE_RATIO [23:20] + * set mipi ratio + */ + cfg &= ~(0xf << 16); + cfg |= (0x1 << 16); + writel(cfg, &clk->div_lcd0); +} + +/* + * I2C + * + * exynos5: obtaining the I2C clock + */ +static unsigned long exynos5_get_i2c_clk(void) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + unsigned long aclk_66, aclk_66_pre, sclk; + unsigned int ratio; + + sclk = get_pll_clk(MPLL); + + ratio = (readl(&clk->div_top1)) >> 24; + ratio &= 0x7; + aclk_66_pre = sclk / (ratio + 1); + ratio = readl(&clk->div_top0); + ratio &= 0x7; + aclk_66 = aclk_66_pre / (ratio + 1); + return aclk_66; +} + +int exynos5_set_epll_clk(unsigned long rate) +{ + unsigned int epll_con, epll_con_k; + unsigned int i; + unsigned int lockcnt; + unsigned int start; + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + + epll_con = readl(&clk->epll_con0); + epll_con &= ~((EPLL_CON0_LOCK_DET_EN_MASK << + EPLL_CON0_LOCK_DET_EN_SHIFT) | + EPLL_CON0_MDIV_MASK << EPLL_CON0_MDIV_SHIFT | + EPLL_CON0_PDIV_MASK << EPLL_CON0_PDIV_SHIFT | + EPLL_CON0_SDIV_MASK << EPLL_CON0_SDIV_SHIFT); + + for (i = 0; i < ARRAY_SIZE(exynos5_epll_div); i++) { + if (exynos5_epll_div[i].freq_out == rate) + break; + } + + if (i == ARRAY_SIZE(exynos5_epll_div)) + return -1; + + epll_con_k = exynos5_epll_div[i].k_dsm << 0; + epll_con |= exynos5_epll_div[i].en_lock_det << + EPLL_CON0_LOCK_DET_EN_SHIFT; + epll_con |= exynos5_epll_div[i].m_div << EPLL_CON0_MDIV_SHIFT; + epll_con |= exynos5_epll_div[i].p_div << EPLL_CON0_PDIV_SHIFT; + epll_con |= exynos5_epll_div[i].s_div << EPLL_CON0_SDIV_SHIFT; + + /* + * Required period ( in cycles) to genarate a stable clock output. + * The maximum clock time can be up to 3000 * PDIV cycles of PLLs + * frequency input (as per spec) + */ + lockcnt = 3000 * exynos5_epll_div[i].p_div; + + writel(lockcnt, &clk->epll_lock); + writel(epll_con, &clk->epll_con0); + writel(epll_con_k, &clk->epll_con1); + + start = get_timer(0); + + while (!(readl(&clk->epll_con0) & + (0x1 << EXYNOS5_EPLLCON0_LOCKED_SHIFT))) { + if (get_timer(start) > TIMEOUT_EPLL_LOCK) { + debug("%s: Timeout waiting for EPLL lock\n", __func__); + return -1; + } + } + return 0; +} + +void exynos5_set_i2s_clk_source(void) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + + clrsetbits_le32(&clk->src_peric1, AUDIO1_SEL_MASK, + (CLK_SRC_SCLK_EPLL)); +} + +int exynos5_set_i2s_clk_prescaler(unsigned int src_frq, + unsigned int dst_frq) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + unsigned int div; + + if ((dst_frq == 0) || (src_frq == 0)) { + debug("%s: Invalid requency input for prescaler\n", __func__); + debug("src frq = %d des frq = %d ", src_frq, dst_frq); + return -1; + } + + div = (src_frq / dst_frq); + if (div > AUDIO_1_RATIO_MASK) { + debug("%s: Frequency ratio is out of range\n", __func__); + debug("src frq = %d des frq = %d ", src_frq, dst_frq); + return -1; + } + clrsetbits_le32(&clk->div_peric4, AUDIO_1_RATIO_MASK, + (div & AUDIO_1_RATIO_MASK)); + return 0; +} + +/** + * Linearly searches for the most accurate main and fine stage clock scalars + * (divisors) for a specified target frequency and scalar bit sizes by checking + * all multiples of main_scalar_bits values. Will always return scalars up to or + * slower than target. + * + * @param main_scalar_bits Number of main scalar bits, must be > 0 and < 32 + * @param fine_scalar_bits Number of fine scalar bits, must be > 0 and < 32 + * @param input_freq Clock frequency to be scaled in Hz + * @param target_freq Desired clock frequency in Hz + * @param best_fine_scalar Pointer to store the fine stage divisor + * + * @return best_main_scalar Main scalar for desired frequency or -1 if none + * found + */ +static int clock_calc_best_scalar(unsigned int main_scaler_bits, + unsigned int fine_scalar_bits, unsigned int input_rate, + unsigned int target_rate, unsigned int *best_fine_scalar) +{ + int i; + int best_main_scalar = -1; + unsigned int best_error = target_rate; + const unsigned int cap = (1 << fine_scalar_bits) - 1; + const unsigned int loops = 1 << main_scaler_bits; + + debug("Input Rate is %u, Target is %u, Cap is %u\n", input_rate, + target_rate, cap); + + assert(best_fine_scalar != NULL); + assert(main_scaler_bits <= fine_scalar_bits); + + *best_fine_scalar = 1; + + if (input_rate == 0 || target_rate == 0) + return -1; + + if (target_rate >= input_rate) + return 1; + + for (i = 1; i <= loops; i++) { + const unsigned int effective_div = max(min(input_rate / i / + target_rate, cap), 1); + const unsigned int effective_rate = input_rate / i / + effective_div; + const int error = target_rate - effective_rate; + + debug("%d|effdiv:%u, effrate:%u, error:%d\n", i, effective_div, + effective_rate, error); + + if (error >= 0 && error <= best_error) { + best_error = error; + best_main_scalar = i; + *best_fine_scalar = effective_div; + } + } + + return best_main_scalar; +} + +static int exynos5_set_spi_clk(enum periph_id periph_id, + unsigned int rate) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + int main; + unsigned int fine; + unsigned shift, pre_shift; + unsigned mask = 0xff; + u32 *reg; + + main = clock_calc_best_scalar(4, 8, 400000000, rate, &fine); + if (main < 0) { + debug("%s: Cannot set clock rate for periph %d", + __func__, periph_id); + return -1; + } + main = main - 1; + fine = fine - 1; + + switch (periph_id) { + case PERIPH_ID_SPI0: + reg = &clk->div_peric1; + shift = 0; + pre_shift = 8; + break; + case PERIPH_ID_SPI1: + reg = &clk->div_peric1; + shift = 16; + pre_shift = 24; + break; + case PERIPH_ID_SPI2: + reg = &clk->div_peric2; + shift = 0; + pre_shift = 8; + break; + case PERIPH_ID_SPI3: + reg = &clk->sclk_div_isp; + shift = 0; + pre_shift = 4; + break; + case PERIPH_ID_SPI4: + reg = &clk->sclk_div_isp; + shift = 12; + pre_shift = 16; + break; + default: + debug("%s: Unsupported peripheral ID %d\n", __func__, + periph_id); + return -1; + } + clrsetbits_le32(reg, mask << shift, (main & mask) << shift); + clrsetbits_le32(reg, mask << pre_shift, (fine & mask) << pre_shift); + + return 0; +} + +static unsigned long exynos4_get_i2c_clk(void) +{ + struct exynos4_clock *clk = + (struct exynos4_clock *)samsung_get_base_clock(); + unsigned long sclk, aclk_100; + unsigned int ratio; + + sclk = get_pll_clk(APLL); + + ratio = (readl(&clk->div_top)) >> 4; + ratio &= 0xf; + aclk_100 = sclk / (ratio + 1); + return aclk_100; +} + +unsigned long get_pll_clk(int pllreg) +{ + if (cpu_is_exynos5()) + return exynos5_get_pll_clk(pllreg); + else { + if (proid_is_exynos4412()) + return exynos4x12_get_pll_clk(pllreg); + return exynos4_get_pll_clk(pllreg); + } +} + +unsigned long get_arm_clk(void) +{ + if (cpu_is_exynos5()) + return exynos5_get_arm_clk(); + else { + if (proid_is_exynos4412()) + return exynos4x12_get_arm_clk(); + return exynos4_get_arm_clk(); + } +} + +unsigned long get_i2c_clk(void) +{ + if (cpu_is_exynos5()) { + return exynos5_get_i2c_clk(); + } else if (cpu_is_exynos4()) { + return exynos4_get_i2c_clk(); + } else { + debug("I2C clock is not set for this CPU\n"); + return 0; + } +} + +unsigned long get_pwm_clk(void) +{ + if (cpu_is_exynos5()) + return clock_get_periph_rate(PERIPH_ID_PWM0); + else { + if (proid_is_exynos4412()) + return exynos4x12_get_pwm_clk(); + return exynos4_get_pwm_clk(); + } +} + +unsigned long get_uart_clk(int dev_index) +{ + if (cpu_is_exynos5()) + return exynos5_get_uart_clk(dev_index); + else { + if (proid_is_exynos4412()) + return exynos4x12_get_uart_clk(dev_index); + return exynos4_get_uart_clk(dev_index); + } +} + +unsigned long get_mmc_clk(int dev_index) +{ + if (cpu_is_exynos5()) + return exynos5_get_mmc_clk(dev_index); + else + return exynos4_get_mmc_clk(dev_index); +} + +void set_mmc_clk(int dev_index, unsigned int div) +{ + if (cpu_is_exynos5()) + exynos5_set_mmc_clk(dev_index, div); + else { + if (proid_is_exynos4412()) + exynos4x12_set_mmc_clk(dev_index, div); + exynos4_set_mmc_clk(dev_index, div); + } +} + +unsigned long get_lcd_clk(void) +{ + if (cpu_is_exynos4()) + return exynos4_get_lcd_clk(); + else + return exynos5_get_lcd_clk(); +} + +void set_lcd_clk(void) +{ + if (cpu_is_exynos4()) + exynos4_set_lcd_clk(); + else + exynos5_set_lcd_clk(); +} + +void set_mipi_clk(void) +{ + if (cpu_is_exynos4()) + exynos4_set_mipi_clk(); +} + +int set_spi_clk(int periph_id, unsigned int rate) +{ + if (cpu_is_exynos5()) + return exynos5_set_spi_clk(periph_id, rate); + else + return 0; +} + +int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq) +{ + + if (cpu_is_exynos5()) + return exynos5_set_i2s_clk_prescaler(src_frq, dst_frq); + else + return 0; +} + +void set_i2s_clk_source(void) +{ + if (cpu_is_exynos5()) + exynos5_set_i2s_clk_source(); +} + +int set_epll_clk(unsigned long rate) +{ + if (cpu_is_exynos5()) + return exynos5_set_epll_clk(rate); + else + return 0; +} diff --git a/arch/arm/cpu/armv7/exynos/clock_init.h b/arch/arm/cpu/armv7/exynos/clock_init.h new file mode 100644 index 0000000..20a1d47 --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/clock_init.h @@ -0,0 +1,154 @@ +/* + * Clock initialization routines + * + * Copyright (c) 2011 The Chromium OS Authors. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __EXYNOS_CLOCK_INIT_H +#define __EXYNOS_CLOCK_INIT_H + +enum { + MEM_TIMINGS_MSR_COUNT = 4, +}; + +/* These are the ratio's for configuring ARM clock */ +struct arm_clk_ratios { + unsigned arm_freq_mhz; /* Frequency of ARM core in MHz */ + + unsigned apll_mdiv; + unsigned apll_pdiv; + unsigned apll_sdiv; + + unsigned arm2_ratio; + unsigned apll_ratio; + unsigned pclk_dbg_ratio; + unsigned atb_ratio; + unsigned periph_ratio; + unsigned acp_ratio; + unsigned cpud_ratio; + unsigned arm_ratio; +}; + +/* These are the memory timings for a particular memory type and speed */ +struct mem_timings { + enum mem_manuf mem_manuf; /* Memory manufacturer */ + enum ddr_mode mem_type; /* Memory type */ + unsigned frequency_mhz; /* Frequency of memory in MHz */ + + /* Here follow the timing parameters for the selected memory */ + unsigned apll_mdiv; + unsigned apll_pdiv; + unsigned apll_sdiv; + unsigned mpll_mdiv; + unsigned mpll_pdiv; + unsigned mpll_sdiv; + unsigned cpll_mdiv; + unsigned cpll_pdiv; + unsigned cpll_sdiv; + unsigned gpll_mdiv; + unsigned gpll_pdiv; + unsigned gpll_sdiv; + unsigned epll_mdiv; + unsigned epll_pdiv; + unsigned epll_sdiv; + unsigned vpll_mdiv; + unsigned vpll_pdiv; + unsigned vpll_sdiv; + unsigned bpll_mdiv; + unsigned bpll_pdiv; + unsigned bpll_sdiv; + unsigned pclk_cdrex_ratio; + unsigned direct_cmd_msr[MEM_TIMINGS_MSR_COUNT]; + + unsigned timing_ref; + unsigned timing_row; + unsigned timing_data; + unsigned timing_power; + + /* DQS, DQ, DEBUG offsets */ + unsigned phy0_dqs; + unsigned phy1_dqs; + unsigned phy0_dq; + unsigned phy1_dq; + unsigned phy0_tFS; + unsigned phy1_tFS; + unsigned phy0_pulld_dqs; + unsigned phy1_pulld_dqs; + + unsigned lpddr3_ctrl_phy_reset; + unsigned ctrl_start_point; + unsigned ctrl_inc; + unsigned ctrl_start; + unsigned ctrl_dll_on; + unsigned ctrl_ref; + + unsigned ctrl_force; + unsigned ctrl_rdlat; + unsigned ctrl_bstlen; + + unsigned fp_resync; + unsigned iv_size; + unsigned dfi_init_start; + unsigned aref_en; + + unsigned rd_fetch; + + unsigned zq_mode_dds; + unsigned zq_mode_term; + unsigned zq_mode_noterm; /* 1 to allow termination disable */ + + unsigned memcontrol; + unsigned memconfig; + + unsigned membaseconfig0; + unsigned membaseconfig1; + unsigned prechconfig_tp_cnt; + unsigned dpwrdn_cyc; + unsigned dsref_cyc; + unsigned concontrol; + /* Channel and Chip Selection */ + uint8_t dmc_channels; /* number of memory channels */ + uint8_t chips_per_channel; /* number of chips per channel */ + uint8_t chips_to_configure; /* number of chips to configure */ + uint8_t send_zq_init; /* 1 to send this command */ + unsigned impedance; /* drive strength impedeance */ + uint8_t gate_leveling_enable; /* check gate leveling is enabled */ +}; + +/** + * Get the correct memory timings for our selected memory type and speed. + * + * This function can be called from SPL or the main U-Boot. + * + * @return pointer to the memory timings that we should use + */ +struct mem_timings *clock_get_mem_timings(void); + +/* + * Initialize clock for the device + */ +void system_clock_init(void); + +/* + * Set clock divisor value for booting from EMMC. + */ +void emmc_boot_clk_div_set(void); +#endif diff --git a/arch/arm/cpu/armv7/exynos/clock_init_exynos4.c b/arch/arm/cpu/armv7/exynos/clock_init_exynos4.c new file mode 100644 index 0000000..3161090 --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/clock_init_exynos4.c @@ -0,0 +1,95 @@ +/* + * Clock Initialization for board based on EXYNOS4210 + * + * Copyright (C) 2013 Samsung Electronics + * Rajeshwari Shinde <rajeshwari.s@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <config.h> +#include <version.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/clk.h> +#include <asm/arch/clock.h> +#include "common_setup.h" +#include "exynos4_setup.h" + +/* + * system_clock_init: Initialize core clock and bus clock. + * void system_clock_init(void) + */ +void system_clock_init(void) +{ + struct exynos4_clock *clk = + (struct exynos4_clock *)samsung_get_base_clock(); + + writel(CLK_SRC_CPU_VAL, &clk->src_cpu); + + sdelay(0x10000); + + writel(CLK_SRC_TOP0_VAL, &clk->src_top0); + writel(CLK_SRC_TOP1_VAL, &clk->src_top1); + writel(CLK_SRC_DMC_VAL, &clk->src_dmc); + writel(CLK_SRC_LEFTBUS_VAL, &clk->src_leftbus); + writel(CLK_SRC_RIGHTBUS_VAL, &clk->src_rightbus); + writel(CLK_SRC_FSYS_VAL, &clk->src_fsys); + writel(CLK_SRC_PERIL0_VAL, &clk->src_peril0); + writel(CLK_SRC_CAM_VAL, &clk->src_cam); + writel(CLK_SRC_MFC_VAL, &clk->src_mfc); + writel(CLK_SRC_G3D_VAL, &clk->src_g3d); + writel(CLK_SRC_LCD0_VAL, &clk->src_lcd0); + + sdelay(0x10000); + + writel(CLK_DIV_CPU0_VAL, &clk->div_cpu0); + writel(CLK_DIV_CPU1_VAL, &clk->div_cpu1); + writel(CLK_DIV_DMC0_VAL, &clk->div_dmc0); + writel(CLK_DIV_DMC1_VAL, &clk->div_dmc1); + writel(CLK_DIV_LEFTBUS_VAL, &clk->div_leftbus); + writel(CLK_DIV_RIGHTBUS_VAL, &clk->div_rightbus); + writel(CLK_DIV_TOP_VAL, &clk->div_top); + writel(CLK_DIV_FSYS1_VAL, &clk->div_fsys1); + writel(CLK_DIV_FSYS2_VAL, &clk->div_fsys2); + writel(CLK_DIV_FSYS3_VAL, &clk->div_fsys3); + writel(CLK_DIV_PERIL0_VAL, &clk->div_peril0); + writel(CLK_DIV_CAM_VAL, &clk->div_cam); + writel(CLK_DIV_MFC_VAL, &clk->div_mfc); + writel(CLK_DIV_G3D_VAL, &clk->div_g3d); + writel(CLK_DIV_LCD0_VAL, &clk->div_lcd0); + + /* Set PLL locktime */ + writel(PLL_LOCKTIME, &clk->apll_lock); + writel(PLL_LOCKTIME, &clk->mpll_lock); + writel(PLL_LOCKTIME, &clk->epll_lock); + writel(PLL_LOCKTIME, &clk->vpll_lock); + + writel(APLL_CON1_VAL, &clk->apll_con1); + writel(APLL_CON0_VAL, &clk->apll_con0); + writel(MPLL_CON1_VAL, &clk->mpll_con1); + writel(MPLL_CON0_VAL, &clk->mpll_con0); + writel(EPLL_CON1_VAL, &clk->epll_con1); + writel(EPLL_CON0_VAL, &clk->epll_con0); + writel(VPLL_CON1_VAL, &clk->vpll_con1); + writel(VPLL_CON0_VAL, &clk->vpll_con0); + + sdelay(0x30000); +} diff --git a/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c b/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c new file mode 100644 index 0000000..0f9c572 --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c @@ -0,0 +1,684 @@ +/* + * Clock setup for SMDK5250 board based on EXYNOS5 + * + * Copyright (C) 2012 Samsung Electronics + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <config.h> +#include <asm/io.h> +#include <asm/arch/clk.h> +#include <asm/arch/clock.h> +#include <asm/arch/spl.h> +#include <asm/arch/dwmmc.h> + +#include "clock_init.h" +#include "common_setup.h" +#include "exynos5_setup.h" + +#define FSYS1_MMC0_DIV_MASK 0xff0f +#define FSYS1_MMC0_DIV_VAL 0x0701 + +DECLARE_GLOBAL_DATA_PTR; + +struct arm_clk_ratios arm_clk_ratios[] = { + { + .arm_freq_mhz = 600, + + .apll_mdiv = 0xc8, + .apll_pdiv = 0x4, + .apll_sdiv = 0x1, + + .arm2_ratio = 0x0, + .apll_ratio = 0x1, + .pclk_dbg_ratio = 0x1, + .atb_ratio = 0x2, + .periph_ratio = 0x7, + .acp_ratio = 0x7, + .cpud_ratio = 0x1, + .arm_ratio = 0x0, + }, { + .arm_freq_mhz = 800, + + .apll_mdiv = 0x64, + .apll_pdiv = 0x3, + .apll_sdiv = 0x0, + + .arm2_ratio = 0x0, + .apll_ratio = 0x1, + .pclk_dbg_ratio = 0x1, + .atb_ratio = 0x3, + .periph_ratio = 0x7, + .acp_ratio = 0x7, + .cpud_ratio = 0x2, + .arm_ratio = 0x0, + }, { + .arm_freq_mhz = 1000, + + .apll_mdiv = 0x7d, + .apll_pdiv = 0x3, + .apll_sdiv = 0x0, + + .arm2_ratio = 0x0, + .apll_ratio = 0x1, + .pclk_dbg_ratio = 0x1, + .atb_ratio = 0x4, + .periph_ratio = 0x7, + .acp_ratio = 0x7, + .cpud_ratio = 0x2, + .arm_ratio = 0x0, + }, { + .arm_freq_mhz = 1200, + + .apll_mdiv = 0x96, + .apll_pdiv = 0x3, + .apll_sdiv = 0x0, + + .arm2_ratio = 0x0, + .apll_ratio = 0x3, + .pclk_dbg_ratio = 0x1, + .atb_ratio = 0x5, + .periph_ratio = 0x7, + .acp_ratio = 0x7, + .cpud_ratio = 0x3, + .arm_ratio = 0x0, + }, { + .arm_freq_mhz = 1400, + + .apll_mdiv = 0xaf, + .apll_pdiv = 0x3, + .apll_sdiv = 0x0, + + .arm2_ratio = 0x0, + .apll_ratio = 0x3, + .pclk_dbg_ratio = 0x1, + .atb_ratio = 0x6, + .periph_ratio = 0x7, + .acp_ratio = 0x7, + .cpud_ratio = 0x3, + .arm_ratio = 0x0, + }, { + .arm_freq_mhz = 1700, + + .apll_mdiv = 0x1a9, + .apll_pdiv = 0x6, + .apll_sdiv = 0x0, + + .arm2_ratio = 0x0, + .apll_ratio = 0x3, + .pclk_dbg_ratio = 0x1, + .atb_ratio = 0x6, + .periph_ratio = 0x7, + .acp_ratio = 0x7, + .cpud_ratio = 0x3, + .arm_ratio = 0x0, + } +}; +struct mem_timings mem_timings[] = { + { + .mem_manuf = MEM_MANUF_ELPIDA, + .mem_type = DDR_MODE_DDR3, + .frequency_mhz = 800, + .mpll_mdiv = 0xc8, + .mpll_pdiv = 0x3, + .mpll_sdiv = 0x0, + .cpll_mdiv = 0xde, + .cpll_pdiv = 0x4, + .cpll_sdiv = 0x2, + .gpll_mdiv = 0x215, + .gpll_pdiv = 0xc, + .gpll_sdiv = 0x1, + .epll_mdiv = 0x60, + .epll_pdiv = 0x3, + .epll_sdiv = 0x3, + .vpll_mdiv = 0x96, + .vpll_pdiv = 0x3, + .vpll_sdiv = 0x2, + + .bpll_mdiv = 0x64, + .bpll_pdiv = 0x3, + .bpll_sdiv = 0x0, + .pclk_cdrex_ratio = 0x5, + .direct_cmd_msr = { + 0x00020018, 0x00030000, 0x00010042, 0x00000d70 + }, + .timing_ref = 0x000000bb, + .timing_row = 0x8c36650e, + .timing_data = 0x3630580b, + .timing_power = 0x41000a44, + .phy0_dqs = 0x08080808, + .phy1_dqs = 0x08080808, + .phy0_dq = 0x08080808, + .phy1_dq = 0x08080808, + .phy0_tFS = 0x4, + .phy1_tFS = 0x4, + .phy0_pulld_dqs = 0xf, + .phy1_pulld_dqs = 0xf, + + .lpddr3_ctrl_phy_reset = 0x1, + .ctrl_start_point = 0x10, + .ctrl_inc = 0x10, + .ctrl_start = 0x1, + .ctrl_dll_on = 0x1, + .ctrl_ref = 0x8, + + .ctrl_force = 0x1a, + .ctrl_rdlat = 0x0b, + .ctrl_bstlen = 0x08, + + .fp_resync = 0x8, + .iv_size = 0x7, + .dfi_init_start = 1, + .aref_en = 1, + + .rd_fetch = 0x3, + + .zq_mode_dds = 0x7, + .zq_mode_term = 0x1, + .zq_mode_noterm = 0, + + /* + * Dynamic Clock: Always Running + * Memory Burst length: 8 + * Number of chips: 1 + * Memory Bus width: 32 bit + * Memory Type: DDR3 + * Additional Latancy for PLL: 0 Cycle + */ + .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE | + DMC_MEMCONTROL_DPWRDN_DISABLE | + DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE | + DMC_MEMCONTROL_TP_DISABLE | + DMC_MEMCONTROL_DSREF_ENABLE | + DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) | + DMC_MEMCONTROL_MEM_TYPE_DDR3 | + DMC_MEMCONTROL_MEM_WIDTH_32BIT | + DMC_MEMCONTROL_NUM_CHIP_1 | + DMC_MEMCONTROL_BL_8 | + DMC_MEMCONTROL_PZQ_DISABLE | + DMC_MEMCONTROL_MRR_BYTE_7_0, + .memconfig = DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED | + DMC_MEMCONFIGX_CHIP_COL_10 | + DMC_MEMCONFIGX_CHIP_ROW_15 | + DMC_MEMCONFIGX_CHIP_BANK_8, + .membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40), + .membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80), + .prechconfig_tp_cnt = 0xff, + .dpwrdn_cyc = 0xff, + .dsref_cyc = 0xffff, + .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE | + DMC_CONCONTROL_TIMEOUT_LEVEL0 | + DMC_CONCONTROL_RD_FETCH_DISABLE | + DMC_CONCONTROL_EMPTY_DISABLE | + DMC_CONCONTROL_AREF_EN_DISABLE | + DMC_CONCONTROL_IO_PD_CON_DISABLE, + .dmc_channels = 2, + .chips_per_channel = 2, + .chips_to_configure = 1, + .send_zq_init = 1, + .impedance = IMP_OUTPUT_DRV_30_OHM, + .gate_leveling_enable = 0, + }, { + .mem_manuf = MEM_MANUF_SAMSUNG, + .mem_type = DDR_MODE_DDR3, + .frequency_mhz = 800, + .mpll_mdiv = 0xc8, + .mpll_pdiv = 0x3, + .mpll_sdiv = 0x0, + .cpll_mdiv = 0xde, + .cpll_pdiv = 0x4, + .cpll_sdiv = 0x2, + .gpll_mdiv = 0x215, + .gpll_pdiv = 0xc, + .gpll_sdiv = 0x1, + .epll_mdiv = 0x60, + .epll_pdiv = 0x3, + .epll_sdiv = 0x3, + .vpll_mdiv = 0x96, + .vpll_pdiv = 0x3, + .vpll_sdiv = 0x2, + + .bpll_mdiv = 0x64, + .bpll_pdiv = 0x3, + .bpll_sdiv = 0x0, + .pclk_cdrex_ratio = 0x5, + .direct_cmd_msr = { + 0x00020018, 0x00030000, 0x00010000, 0x00000d70 + }, + .timing_ref = 0x000000bb, + .timing_row = 0x8c36650e, + .timing_data = 0x3630580b, + .timing_power = 0x41000a44, + .phy0_dqs = 0x08080808, + .phy1_dqs = 0x08080808, + .phy0_dq = 0x08080808, + .phy1_dq = 0x08080808, + .phy0_tFS = 0x8, + .phy1_tFS = 0x8, + .phy0_pulld_dqs = 0xf, + .phy1_pulld_dqs = 0xf, + + .lpddr3_ctrl_phy_reset = 0x1, + .ctrl_start_point = 0x10, + .ctrl_inc = 0x10, + .ctrl_start = 0x1, + .ctrl_dll_on = 0x1, + .ctrl_ref = 0x8, + + .ctrl_force = 0x1a, + .ctrl_rdlat = 0x0b, + .ctrl_bstlen = 0x08, + + .fp_resync = 0x8, + .iv_size = 0x7, + .dfi_init_start = 1, + .aref_en = 1, + + .rd_fetch = 0x3, + + .zq_mode_dds = 0x5, + .zq_mode_term = 0x1, + .zq_mode_noterm = 1, + + /* + * Dynamic Clock: Always Running + * Memory Burst length: 8 + * Number of chips: 1 + * Memory Bus width: 32 bit + * Memory Type: DDR3 + * Additional Latancy for PLL: 0 Cycle + */ + .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE | + DMC_MEMCONTROL_DPWRDN_DISABLE | + DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE | + DMC_MEMCONTROL_TP_DISABLE | + DMC_MEMCONTROL_DSREF_ENABLE | + DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) | + DMC_MEMCONTROL_MEM_TYPE_DDR3 | + DMC_MEMCONTROL_MEM_WIDTH_32BIT | + DMC_MEMCONTROL_NUM_CHIP_1 | + DMC_MEMCONTROL_BL_8 | + DMC_MEMCONTROL_PZQ_DISABLE | + DMC_MEMCONTROL_MRR_BYTE_7_0, + .memconfig = DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED | + DMC_MEMCONFIGX_CHIP_COL_10 | + DMC_MEMCONFIGX_CHIP_ROW_15 | + DMC_MEMCONFIGX_CHIP_BANK_8, + .membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40), + .membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80), + .prechconfig_tp_cnt = 0xff, + .dpwrdn_cyc = 0xff, + .dsref_cyc = 0xffff, + .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE | + DMC_CONCONTROL_TIMEOUT_LEVEL0 | + DMC_CONCONTROL_RD_FETCH_DISABLE | + DMC_CONCONTROL_EMPTY_DISABLE | + DMC_CONCONTROL_AREF_EN_DISABLE | + DMC_CONCONTROL_IO_PD_CON_DISABLE, + .dmc_channels = 2, + .chips_per_channel = 2, + .chips_to_configure = 1, + .send_zq_init = 1, + .impedance = IMP_OUTPUT_DRV_40_OHM, + .gate_leveling_enable = 1, + } +}; + +/** + * Get the required memory type and speed (SPL version). + * + * In SPL we have no device tree, so we use the machine parameters + * + * @param mem_type Returns memory type + * @param frequency_mhz Returns memory speed in MHz + * @param arm_freq Returns ARM clock speed in MHz + * @param mem_manuf Return Memory Manufacturer name + */ +static void clock_get_mem_selection(enum ddr_mode *mem_type, + unsigned *frequency_mhz, unsigned *arm_freq, + enum mem_manuf *mem_manuf) +{ + struct spl_machine_param *params; + + params = spl_get_machine_params(); + *mem_type = params->mem_type; + *frequency_mhz = params->frequency_mhz; + *arm_freq = params->arm_freq_mhz; + *mem_manuf = params->mem_manuf; +} + +/* Get the ratios for setting ARM clock */ +struct arm_clk_ratios *get_arm_ratios(void) +{ + struct arm_clk_ratios *arm_ratio; + enum ddr_mode mem_type; + enum mem_manuf mem_manuf; + unsigned frequency_mhz, arm_freq; + int i; + + clock_get_mem_selection(&mem_type, &frequency_mhz, + &arm_freq, &mem_manuf); + + for (i = 0, arm_ratio = arm_clk_ratios; i < ARRAY_SIZE(arm_clk_ratios); + i++, arm_ratio++) { + if (arm_ratio->arm_freq_mhz == arm_freq) + return arm_ratio; + } + + /* will hang if failed to find clock ratio */ + while (1) + ; + + return NULL; +} + +struct mem_timings *clock_get_mem_timings(void) +{ + struct mem_timings *mem; + enum ddr_mode mem_type; + enum mem_manuf mem_manuf; + unsigned frequency_mhz, arm_freq; + int i; + + clock_get_mem_selection(&mem_type, &frequency_mhz, + &arm_freq, &mem_manuf); + for (i = 0, mem = mem_timings; i < ARRAY_SIZE(mem_timings); + i++, mem++) { + if (mem->mem_type == mem_type && + mem->frequency_mhz == frequency_mhz && + mem->mem_manuf == mem_manuf) + return mem; + } + + /* will hang if failed to find memory timings */ + while (1) + ; + + return NULL; +} + +void system_clock_init() +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + struct mem_timings *mem; + struct arm_clk_ratios *arm_clk_ratio; + u32 val, tmp; + + mem = clock_get_mem_timings(); + arm_clk_ratio = get_arm_ratios(); + + clrbits_le32(&clk->src_cpu, MUX_APLL_SEL_MASK); + do { + val = readl(&clk->mux_stat_cpu); + } while ((val | MUX_APLL_SEL_MASK) != val); + + clrbits_le32(&clk->src_core1, MUX_MPLL_SEL_MASK); + do { + val = readl(&clk->mux_stat_core1); + } while ((val | MUX_MPLL_SEL_MASK) != val); + + clrbits_le32(&clk->src_top2, MUX_CPLL_SEL_MASK); + clrbits_le32(&clk->src_top2, MUX_EPLL_SEL_MASK); + clrbits_le32(&clk->src_top2, MUX_VPLL_SEL_MASK); + clrbits_le32(&clk->src_top2, MUX_GPLL_SEL_MASK); + tmp = MUX_CPLL_SEL_MASK | MUX_EPLL_SEL_MASK | MUX_VPLL_SEL_MASK + | MUX_GPLL_SEL_MASK; + do { + val = readl(&clk->mux_stat_top2); + } while ((val | tmp) != val); + + clrbits_le32(&clk->src_cdrex, MUX_BPLL_SEL_MASK); + do { + val = readl(&clk->mux_stat_cdrex); + } while ((val | MUX_BPLL_SEL_MASK) != val); + + /* PLL locktime */ + writel(APLL_LOCK_VAL, &clk->apll_lock); + + writel(MPLL_LOCK_VAL, &clk->mpll_lock); + + writel(BPLL_LOCK_VAL, &clk->bpll_lock); + + writel(CPLL_LOCK_VAL, &clk->cpll_lock); + + writel(GPLL_LOCK_VAL, &clk->gpll_lock); + + writel(EPLL_LOCK_VAL, &clk->epll_lock); + + writel(VPLL_LOCK_VAL, &clk->vpll_lock); + + writel(CLK_REG_DISABLE, &clk->pll_div2_sel); + + writel(MUX_HPM_SEL_MASK, &clk->src_cpu); + do { + val = readl(&clk->mux_stat_cpu); + } while ((val | HPM_SEL_SCLK_MPLL) != val); + + val = arm_clk_ratio->arm2_ratio << 28 + | arm_clk_ratio->apll_ratio << 24 + | arm_clk_ratio->pclk_dbg_ratio << 20 + | arm_clk_ratio->atb_ratio << 16 + | arm_clk_ratio->periph_ratio << 12 + | arm_clk_ratio->acp_ratio << 8 + | arm_clk_ratio->cpud_ratio << 4 + | arm_clk_ratio->arm_ratio; + writel(val, &clk->div_cpu0); + do { + val = readl(&clk->div_stat_cpu0); + } while (0 != val); + + writel(CLK_DIV_CPU1_VAL, &clk->div_cpu1); + do { + val = readl(&clk->div_stat_cpu1); + } while (0 != val); + + /* Set APLL */ + writel(APLL_CON1_VAL, &clk->apll_con1); + val = set_pll(arm_clk_ratio->apll_mdiv, arm_clk_ratio->apll_pdiv, + arm_clk_ratio->apll_sdiv); + writel(val, &clk->apll_con0); + while ((readl(&clk->apll_con0) & APLL_CON0_LOCKED) == 0) + ; + + /* Set MPLL */ + writel(MPLL_CON1_VAL, &clk->mpll_con1); + val = set_pll(mem->mpll_mdiv, mem->mpll_pdiv, mem->mpll_sdiv); + writel(val, &clk->mpll_con0); + while ((readl(&clk->mpll_con0) & MPLL_CON0_LOCKED) == 0) + ; + + /* Set BPLL */ + writel(BPLL_CON1_VAL, &clk->bpll_con1); + val = set_pll(mem->bpll_mdiv, mem->bpll_pdiv, mem->bpll_sdiv); + writel(val, &clk->bpll_con0); + while ((readl(&clk->bpll_con0) & BPLL_CON0_LOCKED) == 0) + ; + + /* Set CPLL */ + writel(CPLL_CON1_VAL, &clk->cpll_con1); + val = set_pll(mem->cpll_mdiv, mem->cpll_pdiv, mem->cpll_sdiv); + writel(val, &clk->cpll_con0); + while ((readl(&clk->cpll_con0) & CPLL_CON0_LOCKED) == 0) + ; + + /* Set GPLL */ + writel(GPLL_CON1_VAL, &clk->gpll_con1); + val = set_pll(mem->gpll_mdiv, mem->gpll_pdiv, mem->gpll_sdiv); + writel(val, &clk->gpll_con0); + while ((readl(&clk->gpll_con0) & GPLL_CON0_LOCKED) == 0) + ; + + /* Set EPLL */ + writel(EPLL_CON2_VAL, &clk->epll_con2); + writel(EPLL_CON1_VAL, &clk->epll_con1); + val = set_pll(mem->epll_mdiv, mem->epll_pdiv, mem->epll_sdiv); + writel(val, &clk->epll_con0); + while ((readl(&clk->epll_con0) & EPLL_CON0_LOCKED) == 0) + ; + + /* Set VPLL */ + writel(VPLL_CON2_VAL, &clk->vpll_con2); + writel(VPLL_CON1_VAL, &clk->vpll_con1); + val = set_pll(mem->vpll_mdiv, mem->vpll_pdiv, mem->vpll_sdiv); + writel(val, &clk->vpll_con0); + while ((readl(&clk->vpll_con0) & VPLL_CON0_LOCKED) == 0) + ; + + writel(CLK_SRC_CORE0_VAL, &clk->src_core0); + writel(CLK_DIV_CORE0_VAL, &clk->div_core0); + while (readl(&clk->div_stat_core0) != 0) + ; + + writel(CLK_DIV_CORE1_VAL, &clk->div_core1); + while (readl(&clk->div_stat_core1) != 0) + ; + + writel(CLK_DIV_SYSRGT_VAL, &clk->div_sysrgt); + while (readl(&clk->div_stat_sysrgt) != 0) + ; + + writel(CLK_DIV_ACP_VAL, &clk->div_acp); + while (readl(&clk->div_stat_acp) != 0) + ; + + writel(CLK_DIV_SYSLFT_VAL, &clk->div_syslft); + while (readl(&clk->div_stat_syslft) != 0) + ; + + writel(CLK_SRC_TOP0_VAL, &clk->src_top0); + writel(CLK_SRC_TOP1_VAL, &clk->src_top1); + writel(TOP2_VAL, &clk->src_top2); + writel(CLK_SRC_TOP3_VAL, &clk->src_top3); + + writel(CLK_DIV_TOP0_VAL, &clk->div_top0); + while (readl(&clk->div_stat_top0)) + ; + + writel(CLK_DIV_TOP1_VAL, &clk->div_top1); + while (readl(&clk->div_stat_top1)) + ; + + writel(CLK_SRC_LEX_VAL, &clk->src_lex); + while (1) { + val = readl(&clk->mux_stat_lex); + if (val == (val | 1)) + break; + } + + writel(CLK_DIV_LEX_VAL, &clk->div_lex); + while (readl(&clk->div_stat_lex)) + ; + + writel(CLK_DIV_R0X_VAL, &clk->div_r0x); + while (readl(&clk->div_stat_r0x)) + ; + + writel(CLK_DIV_R0X_VAL, &clk->div_r0x); + while (readl(&clk->div_stat_r0x)) + ; + + writel(CLK_DIV_R1X_VAL, &clk->div_r1x); + while (readl(&clk->div_stat_r1x)) + ; + + writel(CLK_REG_DISABLE, &clk->src_cdrex); + + writel(CLK_DIV_CDREX_VAL, &clk->div_cdrex); + while (readl(&clk->div_stat_cdrex)) + ; + + val = readl(&clk->src_cpu); + val |= CLK_SRC_CPU_VAL; + writel(val, &clk->src_cpu); + + val = readl(&clk->src_top2); + val |= CLK_SRC_TOP2_VAL; + writel(val, &clk->src_top2); + + val = readl(&clk->src_core1); + val |= CLK_SRC_CORE1_VAL; + writel(val, &clk->src_core1); + + writel(CLK_SRC_FSYS0_VAL, &clk->src_fsys); + writel(CLK_DIV_FSYS0_VAL, &clk->div_fsys0); + while (readl(&clk->div_stat_fsys0)) + ; + + writel(CLK_REG_DISABLE, &clk->clkout_cmu_cpu); + writel(CLK_REG_DISABLE, &clk->clkout_cmu_core); + writel(CLK_REG_DISABLE, &clk->clkout_cmu_acp); + writel(CLK_REG_DISABLE, &clk->clkout_cmu_top); + writel(CLK_REG_DISABLE, &clk->clkout_cmu_lex); + writel(CLK_REG_DISABLE, &clk->clkout_cmu_r0x); + writel(CLK_REG_DISABLE, &clk->clkout_cmu_r1x); + writel(CLK_REG_DISABLE, &clk->clkout_cmu_cdrex); + + writel(CLK_SRC_PERIC0_VAL, &clk->src_peric0); + writel(CLK_DIV_PERIC0_VAL, &clk->div_peric0); + + writel(CLK_SRC_PERIC1_VAL, &clk->src_peric1); + writel(CLK_DIV_PERIC1_VAL, &clk->div_peric1); + writel(CLK_DIV_PERIC2_VAL, &clk->div_peric2); + writel(CLK_DIV_PERIC3_VAL, &clk->div_peric3); + + writel(SCLK_SRC_ISP_VAL, &clk->sclk_src_isp); + writel(SCLK_DIV_ISP_VAL, &clk->sclk_div_isp); + writel(CLK_DIV_ISP0_VAL, &clk->div_isp0); + writel(CLK_DIV_ISP1_VAL, &clk->div_isp1); + writel(CLK_DIV_ISP2_VAL, &clk->div_isp2); + + /* FIMD1 SRC CLK SELECTION */ + writel(CLK_SRC_DISP1_0_VAL, &clk->src_disp1_0); + + val = MMC2_PRE_RATIO_VAL << MMC2_PRE_RATIO_OFFSET + | MMC2_RATIO_VAL << MMC2_RATIO_OFFSET + | MMC3_PRE_RATIO_VAL << MMC3_PRE_RATIO_OFFSET + | MMC3_RATIO_VAL << MMC3_RATIO_OFFSET; + writel(val, &clk->div_fsys2); +} + +void clock_init_dp_clock(void) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + + /* DP clock enable */ + setbits_le32(&clk->gate_ip_disp1, CLK_GATE_DP1_ALLOW); + + /* We run DP at 267 Mhz */ + setbits_le32(&clk->div_disp1_0, CLK_DIV_DISP1_0_FIMD1); +} + +/* + * Set clock divisor value for booting from EMMC. + * Set DWMMC channel-0 clk div to operate mmc0 device at 50MHz. + */ +void emmc_boot_clk_div_set(void) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + unsigned int div_mmc; + + div_mmc = readl((unsigned int) &clk->div_fsys1) & ~FSYS1_MMC0_DIV_MASK; + div_mmc |= FSYS1_MMC0_DIV_VAL; + writel(div_mmc, (unsigned int) &clk->div_fsys1); +} diff --git a/arch/arm/cpu/armv7/exynos/common_setup.h b/arch/arm/cpu/armv7/exynos/common_setup.h new file mode 100644 index 0000000..e6318c0 --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/common_setup.h @@ -0,0 +1,45 @@ +/* + * Common APIs for EXYNOS based board + * + * Copyright (C) 2013 Samsung Electronics + * Rajeshwari Shinde <rajeshwari.s@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define DMC_OFFSET 0x10000 + +/* + * Memory initialization + * + * @param reset Reset PHY during initialization. + */ +void mem_ctrl_init(int reset); + + /* System Clock initialization */ +void system_clock_init(void); + +/* + * Init subsystems according to the reset status + * + * @return 0 for a normal boot, non-zero for a resume + */ +int do_lowlevel_init(void); + +void sdelay(unsigned long); diff --git a/arch/arm/cpu/armv7/exynos/dmc_common.c b/arch/arm/cpu/armv7/exynos/dmc_common.c new file mode 100644 index 0000000..645f57e --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/dmc_common.c @@ -0,0 +1,200 @@ +/* + * Mem setup common file for different types of DDR present on SMDK5250 boards. + * + * Copyright (C) 2012 Samsung Electronics + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/spl.h> + +#include "clock_init.h" +#include "common_setup.h" +#include "exynos5_setup.h" + +#define ZQ_INIT_TIMEOUT 10000 + +int dmc_config_zq(struct mem_timings *mem, + struct exynos5_phy_control *phy0_ctrl, + struct exynos5_phy_control *phy1_ctrl) +{ + unsigned long val = 0; + int i; + + /* + * ZQ Calibration: + * Select Driver Strength, + * long calibration for manual calibration + */ + val = PHY_CON16_RESET_VAL; + val |= mem->zq_mode_dds << PHY_CON16_ZQ_MODE_DDS_SHIFT; + val |= mem->zq_mode_term << PHY_CON16_ZQ_MODE_TERM_SHIFT; + val |= ZQ_CLK_DIV_EN; + writel(val, &phy0_ctrl->phy_con16); + writel(val, &phy1_ctrl->phy_con16); + + /* Disable termination */ + if (mem->zq_mode_noterm) + val |= PHY_CON16_ZQ_MODE_NOTERM_MASK; + writel(val, &phy0_ctrl->phy_con16); + writel(val, &phy1_ctrl->phy_con16); + + /* ZQ_MANUAL_START: Enable */ + val |= ZQ_MANUAL_STR; + writel(val, &phy0_ctrl->phy_con16); + writel(val, &phy1_ctrl->phy_con16); + + /* ZQ_MANUAL_START: Disable */ + val &= ~ZQ_MANUAL_STR; + + /* + * Since we are manaully calibrating the ZQ values, + * we are looping for the ZQ_init to complete. + */ + i = ZQ_INIT_TIMEOUT; + while ((readl(&phy0_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) { + sdelay(100); + i--; + } + if (!i) + return -1; + writel(val, &phy0_ctrl->phy_con16); + + i = ZQ_INIT_TIMEOUT; + while ((readl(&phy1_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) { + sdelay(100); + i--; + } + if (!i) + return -1; + writel(val, &phy1_ctrl->phy_con16); + + return 0; +} + +void update_reset_dll(struct exynos5_dmc *dmc, enum ddr_mode mode) +{ + unsigned long val; + + if (mode == DDR_MODE_DDR3) { + val = MEM_TERM_EN | PHY_TERM_EN | DMC_CTRL_SHGATE; + writel(val, &dmc->phycontrol0); + } + + /* Update DLL Information: Force DLL Resyncronization */ + val = readl(&dmc->phycontrol0); + val |= FP_RSYNC; + writel(val, &dmc->phycontrol0); + + /* Reset Force DLL Resyncronization */ + val = readl(&dmc->phycontrol0); + val &= ~FP_RSYNC; + writel(val, &dmc->phycontrol0); +} + +void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc) +{ + int channel, chip; + + for (channel = 0; channel < mem->dmc_channels; channel++) { + unsigned long mask; + + mask = channel << DIRECT_CMD_CHANNEL_SHIFT; + for (chip = 0; chip < mem->chips_to_configure; chip++) { + int i; + + mask |= chip << DIRECT_CMD_CHIP_SHIFT; + + /* Sending NOP command */ + writel(DIRECT_CMD_NOP | mask, &dmc->directcmd); + + /* + * TODO(alim.akhtar@samsung.com): Do we need these + * delays? This one and the next were not there for + * DDR3. + */ + sdelay(0x10000); + + /* Sending EMRS/MRS commands */ + for (i = 0; i < MEM_TIMINGS_MSR_COUNT; i++) { + writel(mem->direct_cmd_msr[i] | mask, + &dmc->directcmd); + sdelay(0x10000); + } + + if (mem->send_zq_init) { + /* Sending ZQINIT command */ + writel(DIRECT_CMD_ZQINIT | mask, + &dmc->directcmd); + + sdelay(10000); + } + } + } +} + +void dmc_config_prech(struct mem_timings *mem, struct exynos5_dmc *dmc) +{ + int channel, chip; + + for (channel = 0; channel < mem->dmc_channels; channel++) { + unsigned long mask; + + mask = channel << DIRECT_CMD_CHANNEL_SHIFT; + for (chip = 0; chip < mem->chips_per_channel; chip++) { + mask |= chip << DIRECT_CMD_CHIP_SHIFT; + + /* PALL (all banks precharge) CMD */ + writel(DIRECT_CMD_PALL | mask, &dmc->directcmd); + sdelay(0x10000); + } + } +} + +void dmc_config_memory(struct mem_timings *mem, struct exynos5_dmc *dmc) +{ + writel(mem->memconfig, &dmc->memconfig0); + writel(mem->memconfig, &dmc->memconfig1); + writel(DMC_MEMBASECONFIG0_VAL, &dmc->membaseconfig0); + writel(DMC_MEMBASECONFIG1_VAL, &dmc->membaseconfig1); +} + +void mem_ctrl_init(int reset) +{ + struct spl_machine_param *param = spl_get_machine_params(); + struct mem_timings *mem; + int ret; + + mem = clock_get_mem_timings(); + + /* If there are any other memory variant, add their init call below */ + if (param->mem_type == DDR_MODE_DDR3) { + ret = ddr3_mem_ctrl_init(mem, param->mem_iv_size, reset); + if (ret) { + /* will hang if failed to init memory control */ + while (1) + ; + } + } else { + /* will hang if unknow memory type */ + while (1) + ; + } +} diff --git a/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c new file mode 100644 index 0000000..e03d74b --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c @@ -0,0 +1,233 @@ +/* + * DDR3 mem setup file for SMDK5250 board based on EXYNOS5 + * + * Copyright (C) 2012 Samsung Electronics + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/cpu.h> +#include <asm/arch/dmc.h> +#include "common_setup.h" +#include "exynos5_setup.h" +#include "clock_init.h" + +#define RDLVL_COMPLETE_TIMEOUT 10000 + +static void reset_phy_ctrl(void) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + + writel(DDR3PHY_CTRL_PHY_RESET_OFF, &clk->lpddr3phy_ctrl); + writel(DDR3PHY_CTRL_PHY_RESET, &clk->lpddr3phy_ctrl); +} + +int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size, + int reset) +{ + unsigned int val; + struct exynos5_phy_control *phy0_ctrl, *phy1_ctrl; + struct exynos5_dmc *dmc; + int i; + + phy0_ctrl = (struct exynos5_phy_control *)samsung_get_base_dmc_phy(); + phy1_ctrl = (struct exynos5_phy_control *)(samsung_get_base_dmc_phy() + + DMC_OFFSET); + dmc = (struct exynos5_dmc *)samsung_get_base_dmc_ctrl(); + + if (reset) + reset_phy_ctrl(); + + /* Set Impedance Output Driver */ + val = (mem->impedance << CA_CK_DRVR_DS_OFFSET) | + (mem->impedance << CA_CKE_DRVR_DS_OFFSET) | + (mem->impedance << CA_CS_DRVR_DS_OFFSET) | + (mem->impedance << CA_ADR_DRVR_DS_OFFSET); + writel(val, &phy0_ctrl->phy_con39); + writel(val, &phy1_ctrl->phy_con39); + + /* Set Read Latency and Burst Length for PHY0 and PHY1 */ + val = (mem->ctrl_bstlen << PHY_CON42_CTRL_BSTLEN_SHIFT) | + (mem->ctrl_rdlat << PHY_CON42_CTRL_RDLAT_SHIFT); + writel(val, &phy0_ctrl->phy_con42); + writel(val, &phy1_ctrl->phy_con42); + + /* ZQ Calibration */ + if (dmc_config_zq(mem, phy0_ctrl, phy1_ctrl)) + return SETUP_ERR_ZQ_CALIBRATION_FAILURE; + + /* DQ Signal */ + writel(mem->phy0_pulld_dqs, &phy0_ctrl->phy_con14); + writel(mem->phy1_pulld_dqs, &phy1_ctrl->phy_con14); + + writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT) + | (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT), + &dmc->concontrol); + + update_reset_dll(dmc, DDR_MODE_DDR3); + + /* DQS Signal */ + writel(mem->phy0_dqs, &phy0_ctrl->phy_con4); + writel(mem->phy1_dqs, &phy1_ctrl->phy_con4); + + writel(mem->phy0_dq, &phy0_ctrl->phy_con6); + writel(mem->phy1_dq, &phy1_ctrl->phy_con6); + + writel(mem->phy0_tFS, &phy0_ctrl->phy_con10); + writel(mem->phy1_tFS, &phy1_ctrl->phy_con10); + + val = (mem->ctrl_start_point << PHY_CON12_CTRL_START_POINT_SHIFT) | + (mem->ctrl_inc << PHY_CON12_CTRL_INC_SHIFT) | + (mem->ctrl_dll_on << PHY_CON12_CTRL_DLL_ON_SHIFT) | + (mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT); + writel(val, &phy0_ctrl->phy_con12); + writel(val, &phy1_ctrl->phy_con12); + + /* Start DLL locking */ + writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT), + &phy0_ctrl->phy_con12); + writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT), + &phy1_ctrl->phy_con12); + + update_reset_dll(dmc, DDR_MODE_DDR3); + + writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT), + &dmc->concontrol); + + /* Memory Channel Inteleaving Size */ + writel(mem->iv_size, &dmc->ivcontrol); + + writel(mem->memconfig, &dmc->memconfig0); + writel(mem->memconfig, &dmc->memconfig1); + writel(mem->membaseconfig0, &dmc->membaseconfig0); + writel(mem->membaseconfig1, &dmc->membaseconfig1); + + /* Precharge Configuration */ + writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT, + &dmc->prechconfig); + + /* Power Down mode Configuration */ + writel(mem->dpwrdn_cyc << PWRDNCONFIG_DPWRDN_CYC_SHIFT | + mem->dsref_cyc << PWRDNCONFIG_DSREF_CYC_SHIFT, + &dmc->pwrdnconfig); + + /* TimingRow, TimingData, TimingPower and Timingaref + * values as per Memory AC parameters + */ + writel(mem->timing_ref, &dmc->timingref); + writel(mem->timing_row, &dmc->timingrow); + writel(mem->timing_data, &dmc->timingdata); + writel(mem->timing_power, &dmc->timingpower); + + /* Send PALL command */ + dmc_config_prech(mem, dmc); + + /* Send NOP, MRS and ZQINIT commands */ + dmc_config_mrs(mem, dmc); + + if (mem->gate_leveling_enable) { + val = PHY_CON0_RESET_VAL; + val |= P0_CMD_EN; + writel(val, &phy0_ctrl->phy_con0); + writel(val, &phy1_ctrl->phy_con0); + + val = PHY_CON2_RESET_VAL; + val |= INIT_DESKEW_EN; + writel(val, &phy0_ctrl->phy_con2); + writel(val, &phy1_ctrl->phy_con2); + + val = PHY_CON0_RESET_VAL; + val |= P0_CMD_EN; + val |= BYTE_RDLVL_EN; + writel(val, &phy0_ctrl->phy_con0); + writel(val, &phy1_ctrl->phy_con0); + + val = (mem->ctrl_start_point << + PHY_CON12_CTRL_START_POINT_SHIFT) | + (mem->ctrl_inc << PHY_CON12_CTRL_INC_SHIFT) | + (mem->ctrl_force << PHY_CON12_CTRL_FORCE_SHIFT) | + (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT) | + (mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT); + writel(val, &phy0_ctrl->phy_con12); + writel(val, &phy1_ctrl->phy_con12); + + val = PHY_CON2_RESET_VAL; + val |= INIT_DESKEW_EN; + val |= RDLVL_GATE_EN; + writel(val, &phy0_ctrl->phy_con2); + writel(val, &phy1_ctrl->phy_con2); + + val = PHY_CON0_RESET_VAL; + val |= P0_CMD_EN; + val |= BYTE_RDLVL_EN; + val |= CTRL_SHGATE; + writel(val, &phy0_ctrl->phy_con0); + writel(val, &phy1_ctrl->phy_con0); + + val = PHY_CON1_RESET_VAL; + val &= ~(CTRL_GATEDURADJ_MASK); + writel(val, &phy0_ctrl->phy_con1); + writel(val, &phy1_ctrl->phy_con1); + + writel(CTRL_RDLVL_GATE_ENABLE, &dmc->rdlvl_config); + i = RDLVL_COMPLETE_TIMEOUT; + while ((readl(&dmc->phystatus) & + (RDLVL_COMPLETE_CHO | RDLVL_COMPLETE_CH1)) != + (RDLVL_COMPLETE_CHO | RDLVL_COMPLETE_CH1) && i > 0) { + /* + * TODO(waihong): Comment on how long this take to + * timeout + */ + sdelay(100); + i--; + } + if (!i) + return SETUP_ERR_RDLV_COMPLETE_TIMEOUT; + writel(CTRL_RDLVL_GATE_DISABLE, &dmc->rdlvl_config); + + writel(0, &phy0_ctrl->phy_con14); + writel(0, &phy1_ctrl->phy_con14); + + val = (mem->ctrl_start_point << + PHY_CON12_CTRL_START_POINT_SHIFT) | + (mem->ctrl_inc << PHY_CON12_CTRL_INC_SHIFT) | + (mem->ctrl_force << PHY_CON12_CTRL_FORCE_SHIFT) | + (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT) | + (mem->ctrl_dll_on << PHY_CON12_CTRL_DLL_ON_SHIFT) | + (mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT); + writel(val, &phy0_ctrl->phy_con12); + writel(val, &phy1_ctrl->phy_con12); + + update_reset_dll(dmc, DDR_MODE_DDR3); + } + + /* Send PALL command */ + dmc_config_prech(mem, dmc); + + writel(mem->memcontrol, &dmc->memcontrol); + + /* Set DMC Concontrol and enable auto-refresh counter */ + writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT) + | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT), &dmc->concontrol); + return 0; +} diff --git a/arch/arm/cpu/armv7/exynos/dmc_init_exynos4.c b/arch/arm/cpu/armv7/exynos/dmc_init_exynos4.c new file mode 100644 index 0000000..ecddc72 --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/dmc_init_exynos4.c @@ -0,0 +1,213 @@ +/* + * Memory setup for board based on EXYNOS4210 + * + * Copyright (C) 2013 Samsung Electronics + * Rajeshwari Shinde <rajeshwari.s@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/dmc.h> +#include "common_setup.h" +#include "exynos4_setup.h" + +struct mem_timings mem = { + .direct_cmd_msr = { + DIRECT_CMD1, DIRECT_CMD2, DIRECT_CMD3, DIRECT_CMD4 + }, + .timingref = TIMINGREF_VAL, + .timingrow = TIMINGROW_VAL, + .timingdata = TIMINGDATA_VAL, + .timingpower = TIMINGPOWER_VAL, + .zqcontrol = ZQ_CONTROL_VAL, + .control0 = CONTROL0_VAL, + .control1 = CONTROL1_VAL, + .control2 = CONTROL2_VAL, + .concontrol = CONCONTROL_VAL, + .prechconfig = PRECHCONFIG, + .memcontrol = MEMCONTROL_VAL, + .memconfig0 = MEMCONFIG0_VAL, + .memconfig1 = MEMCONFIG1_VAL, + .dll_resync = FORCE_DLL_RESYNC, + .dll_on = DLL_CONTROL_ON, +}; +static void phy_control_reset(int ctrl_no, struct exynos4_dmc *dmc) +{ + if (ctrl_no) { + writel((mem.control1 | (1 << mem.dll_resync)), + &dmc->phycontrol1); + writel((mem.control1 | (0 << mem.dll_resync)), + &dmc->phycontrol1); + } else { + writel((mem.control0 | (0 << mem.dll_on)), + &dmc->phycontrol0); + writel((mem.control0 | (1 << mem.dll_on)), + &dmc->phycontrol0); + } +} + +static void dmc_config_mrs(struct exynos4_dmc *dmc, int chip) +{ + int i; + unsigned long mask = 0; + + if (chip) + mask = DIRECT_CMD_CHIP1_SHIFT; + + for (i = 0; i < MEM_TIMINGS_MSR_COUNT; i++) { + writel(mem.direct_cmd_msr[i] | mask, + &dmc->directcmd); + } +} + +static void dmc_init(struct exynos4_dmc *dmc) +{ + /* + * DLL Parameter Setting: + * Termination: Enable R/W + * Phase Delay for DQS Cleaning: 180' Shift + */ + writel(mem.control1, &dmc->phycontrol1); + + /* + * ZQ Calibration + * Termination: Disable + * Auto Calibration Start: Enable + */ + writel(mem.zqcontrol, &dmc->phyzqcontrol); + sdelay(0x100000); + + /* + * Update DLL Information: + * Force DLL Resyncronization + */ + phy_control_reset(1, dmc); + phy_control_reset(0, dmc); + + /* Set DLL Parameters */ + writel(mem.control1, &dmc->phycontrol1); + + /* DLL Start */ + writel((mem.control0 | CTRL_START | CTRL_DLL_ON), &dmc->phycontrol0); + + writel(mem.control2, &dmc->phycontrol2); + + /* Set Clock Ratio of Bus clock to Memory Clock */ + writel(mem.concontrol, &dmc->concontrol); + + /* + * Memor Burst length: 8 + * Number of chips: 2 + * Memory Bus width: 32 bit + * Memory Type: DDR3 + * Additional Latancy for PLL: 1 Cycle + */ + writel(mem.memcontrol, &dmc->memcontrol); + + writel(mem.memconfig0, &dmc->memconfig0); + writel(mem.memconfig1, &dmc->memconfig1); + + /* Config Precharge Policy */ + writel(mem.prechconfig, &dmc->prechconfig); + /* + * TimingAref, TimingRow, TimingData, TimingPower Setting: + * Values as per Memory AC Parameters + */ + writel(mem.timingref, &dmc->timingref); + writel(mem.timingrow, &dmc->timingrow); + writel(mem.timingdata, &dmc->timingdata); + writel(mem.timingpower, &dmc->timingpower); + + /* Chip0: NOP Command: Assert and Hold CKE to high level */ + writel(DIRECT_CMD_NOP, &dmc->directcmd); + sdelay(0x100000); + + /* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */ + dmc_config_mrs(dmc, 0); + sdelay(0x100000); + + /* Chip0: ZQINIT */ + writel(DIRECT_CMD_ZQ, &dmc->directcmd); + sdelay(0x100000); + + writel((DIRECT_CMD_NOP | DIRECT_CMD_CHIP1_SHIFT), &dmc->directcmd); + sdelay(0x100000); + + /* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */ + dmc_config_mrs(dmc, 1); + sdelay(0x100000); + + /* Chip1: ZQINIT */ + writel((DIRECT_CMD_ZQ | DIRECT_CMD_CHIP1_SHIFT), &dmc->directcmd); + sdelay(0x100000); + + phy_control_reset(1, dmc); + sdelay(0x100000); + + /* turn on DREX0, DREX1 */ + writel((mem.concontrol | AREF_EN), &dmc->concontrol); +} + +void mem_ctrl_init(int reset) +{ + struct exynos4_dmc *dmc; + + /* + * Async bridge configuration at CPU_core: + * 1: half_sync + * 0: full_sync + */ + writel(1, ASYNC_CONFIG); +#ifdef CONFIG_ORIGEN + /* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0x7 */ + writel(APB_SFR_INTERLEAVE_CONF_VAL, EXYNOS4_MIU_BASE + + APB_SFR_INTERLEAVE_CONF_OFFSET); + /* Update MIU Configuration */ + writel(APB_SFR_ARBRITATION_CONF_VAL, EXYNOS4_MIU_BASE + + APB_SFR_ARBRITATION_CONF_OFFSET); +#else + writel(APB_SFR_INTERLEAVE_CONF_VAL, EXYNOS4_MIU_BASE + + APB_SFR_INTERLEAVE_CONF_OFFSET); + writel(INTERLEAVE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE + + ABP_SFR_INTERLEAVE_ADDRMAP_START_OFFSET); + writel(INTERLEAVE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE + + ABP_SFR_INTERLEAVE_ADDRMAP_END_OFFSET); + writel(INTERLEAVE_ADDR_MAP_EN, EXYNOS4_MIU_BASE + + ABP_SFR_SLV_ADDRMAP_CONF_OFFSET); +#ifdef CONFIG_MIU_LINEAR + writel(SLAVE0_SINGLE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE + + ABP_SFR_SLV0_SINGLE_ADDRMAP_START_OFFSET); + writel(SLAVE0_SINGLE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE + + ABP_SFR_SLV0_SINGLE_ADDRMAP_END_OFFSET); + writel(SLAVE1_SINGLE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE + + ABP_SFR_SLV1_SINGLE_ADDRMAP_START_OFFSET); + writel(SLAVE1_SINGLE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE + + ABP_SFR_SLV1_SINGLE_ADDRMAP_END_OFFSET); + writel(APB_SFR_SLV_ADDR_MAP_CONF_VAL, EXYNOS4_MIU_BASE + + ABP_SFR_SLV_ADDRMAP_CONF_OFFSET); +#endif +#endif + /* DREX0 */ + dmc = (struct exynos4_dmc *)samsung_get_base_dmc_ctrl(); + dmc_init(dmc); + dmc = (struct exynos4_dmc *)(samsung_get_base_dmc_ctrl() + + DMC_OFFSET); + dmc_init(dmc); +} diff --git a/arch/arm/cpu/armv7/exynos/exynos4_setup.h b/arch/arm/cpu/armv7/exynos/exynos4_setup.h new file mode 100644 index 0000000..6d25058 --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/exynos4_setup.h @@ -0,0 +1,594 @@ +/* + * Machine Specific Values for EXYNOS4012 based board + * + * Copyright (C) 2011 Samsung Electronics + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ORIGEN_SETUP_H +#define _ORIGEN_SETUP_H + +#include <config.h> +#include <version.h> +#include <asm/arch/cpu.h> + +#ifdef CONFIG_CLK_800_330_165 +#define DRAM_CLK_330 +#endif +#ifdef CONFIG_CLK_1000_200_200 +#define DRAM_CLK_200 +#endif +#ifdef CONFIG_CLK_1000_330_165 +#define DRAM_CLK_330 +#endif +#ifdef CONFIG_CLK_1000_400_200 +#define DRAM_CLK_400 +#endif + +/* Bus Configuration Register Address */ +#define ASYNC_CONFIG 0x10010350 + +/* CLK_SRC_CPU */ +#define MUX_HPM_SEL_MOUTAPLL 0x0 +#define MUX_HPM_SEL_SCLKMPLL 0x1 +#define MUX_CORE_SEL_MOUTAPLL 0x0 +#define MUX_CORE_SEL_SCLKMPLL 0x1 +#define MUX_MPLL_SEL_FILPLL 0x0 +#define MUX_MPLL_SEL_MOUTMPLLFOUT 0x1 +#define MUX_APLL_SEL_FILPLL 0x0 +#define MUX_APLL_SEL_MOUTMPLLFOUT 0x1 +#define CLK_SRC_CPU_VAL ((MUX_HPM_SEL_MOUTAPLL << 20) \ + | (MUX_CORE_SEL_MOUTAPLL << 16) \ + | (MUX_MPLL_SEL_MOUTMPLLFOUT << 8)\ + | (MUX_APLL_SEL_MOUTMPLLFOUT << 0)) + +/* CLK_DIV_CPU0 */ +#define APLL_RATIO 0x0 +#define PCLK_DBG_RATIO 0x1 +#define ATB_RATIO 0x3 +#define PERIPH_RATIO 0x3 +#define COREM1_RATIO 0x7 +#define COREM0_RATIO 0x3 +#define CORE_RATIO 0x0 +#define CLK_DIV_CPU0_VAL ((APLL_RATIO << 24) \ + | (PCLK_DBG_RATIO << 20) \ + | (ATB_RATIO << 16) \ + | (PERIPH_RATIO << 12) \ + | (COREM1_RATIO << 8) \ + | (COREM0_RATIO << 4) \ + | (CORE_RATIO << 0)) + +/* CLK_DIV_CPU1 */ +#define HPM_RATIO 0x0 +#define COPY_RATIO 0x3 +#define CLK_DIV_CPU1_VAL ((HPM_RATIO << 4) | (COPY_RATIO)) + +/* CLK_SRC_DMC */ +#define MUX_PWI_SEL_XXTI 0x0 +#define MUX_PWI_SEL_XUSBXTI 0x1 +#define MUX_PWI_SEL_SCLK_HDMI24M 0x2 +#define MUX_PWI_SEL_SCLK_USBPHY0 0x3 +#define MUX_PWI_SEL_SCLK_USBPHY1 0x4 +#define MUX_PWI_SEL_SCLK_HDMIPHY 0x5 +#define MUX_PWI_SEL_SCLKMPLL 0x6 +#define MUX_PWI_SEL_SCLKEPLL 0x7 +#define MUX_PWI_SEL_SCLKVPLL 0x8 +#define MUX_DPHY_SEL_SCLKMPLL 0x0 +#define MUX_DPHY_SEL_SCLKAPLL 0x1 +#define MUX_DMC_BUS_SEL_SCLKMPLL 0x0 +#define MUX_DMC_BUS_SEL_SCLKAPLL 0x1 +#define CLK_SRC_DMC_VAL ((MUX_PWI_SEL_XUSBXTI << 16) \ + | (MUX_DPHY_SEL_SCLKMPLL << 8) \ + | (MUX_DMC_BUS_SEL_SCLKMPLL << 4)) + +/* CLK_DIV_DMC0 */ +#define CORE_TIMERS_RATIO 0x1 +#define COPY2_RATIO 0x3 +#define DMCP_RATIO 0x1 +#define DMCD_RATIO 0x1 +#define DMC_RATIO 0x1 +#define DPHY_RATIO 0x1 +#define ACP_PCLK_RATIO 0x1 +#define ACP_RATIO 0x3 +#define CLK_DIV_DMC0_VAL ((CORE_TIMERS_RATIO << 28) \ + | (COPY2_RATIO << 24) \ + | (DMCP_RATIO << 20) \ + | (DMCD_RATIO << 16) \ + | (DMC_RATIO << 12) \ + | (DPHY_RATIO << 8) \ + | (ACP_PCLK_RATIO << 4) \ + | (ACP_RATIO << 0)) + +/* CLK_DIV_DMC1 */ +#define DPM_RATIO 0x1 +#define DVSEM_RATIO 0x1 +#define PWI_RATIO 0x1 +#define CLK_DIV_DMC1_VAL ((DPM_RATIO << 24) \ + | (DVSEM_RATIO << 16) \ + | (PWI_RATIO << 8)) + +/* CLK_SRC_TOP0 */ +#define MUX_ONENAND_SEL_ACLK_133 0x0 +#define MUX_ONENAND_SEL_ACLK_160 0x1 +#define MUX_ACLK_133_SEL_SCLKMPLL 0x0 +#define MUX_ACLK_133_SEL_SCLKAPLL 0x1 +#define MUX_ACLK_160_SEL_SCLKMPLL 0x0 +#define MUX_ACLK_160_SEL_SCLKAPLL 0x1 +#define MUX_ACLK_100_SEL_SCLKMPLL 0x0 +#define MUX_ACLK_100_SEL_SCLKAPLL 0x1 +#define MUX_ACLK_200_SEL_SCLKMPLL 0x0 +#define MUX_ACLK_200_SEL_SCLKAPLL 0x1 +#define MUX_VPLL_SEL_FINPLL 0x0 +#define MUX_VPLL_SEL_FOUTVPLL 0x1 +#define MUX_EPLL_SEL_FINPLL 0x0 +#define MUX_EPLL_SEL_FOUTEPLL 0x1 +#define MUX_ONENAND_1_SEL_MOUTONENAND 0x0 +#define MUX_ONENAND_1_SEL_SCLKVPLL 0x1 +#define CLK_SRC_TOP0_VAL ((MUX_ONENAND_SEL_ACLK_133 << 28) \ + | (MUX_ACLK_133_SEL_SCLKMPLL << 24) \ + | (MUX_ACLK_160_SEL_SCLKMPLL << 20) \ + | (MUX_ACLK_100_SEL_SCLKMPLL << 16) \ + | (MUX_ACLK_200_SEL_SCLKMPLL << 12) \ + | (MUX_VPLL_SEL_FINPLL << 8) \ + | (MUX_EPLL_SEL_FINPLL << 4)\ + | (MUX_ONENAND_1_SEL_MOUTONENAND << 0)) + +/* CLK_SRC_TOP1 */ +#define VPLLSRC_SEL_FINPLL 0x0 +#define VPLLSRC_SEL_SCLKHDMI24M 0x1 +#define CLK_SRC_TOP1_VAL (VPLLSRC_SEL_FINPLL) + +/* CLK_DIV_TOP */ +#define ONENAND_RATIO 0x0 +#define ACLK_133_RATIO 0x5 +#define ACLK_160_RATIO 0x4 +#define ACLK_100_RATIO 0x7 +#define ACLK_200_RATIO 0x3 +#define CLK_DIV_TOP_VAL ((ONENAND_RATIO << 16) \ + | (ACLK_133_RATIO << 12)\ + | (ACLK_160_RATIO << 8) \ + | (ACLK_100_RATIO << 4) \ + | (ACLK_200_RATIO << 0)) + +/* CLK_SRC_LEFTBUS */ +#define MUX_GDL_SEL_SCLKMPLL 0x0 +#define MUX_GDL_SEL_SCLKAPLL 0x1 +#define CLK_SRC_LEFTBUS_VAL (MUX_GDL_SEL_SCLKMPLL) + +/* CLK_DIV_LEFTBUS */ +#define GPL_RATIO 0x1 +#define GDL_RATIO 0x3 +#define CLK_DIV_LEFTBUS_VAL ((GPL_RATIO << 4) | (GDL_RATIO)) + +/* CLK_SRC_RIGHTBUS */ +#define MUX_GDR_SEL_SCLKMPLL 0x0 +#define MUX_GDR_SEL_SCLKAPLL 0x1 +#define CLK_SRC_RIGHTBUS_VAL (MUX_GDR_SEL_SCLKMPLL) + +/* CLK_DIV_RIGHTBUS */ +#define GPR_RATIO 0x1 +#define GDR_RATIO 0x3 +#define CLK_DIV_RIGHTBUS_VAL ((GPR_RATIO << 4) | (GDR_RATIO)) + +/* CLK_SRS_FSYS: 6 = SCLKMPLL */ +#define SATA_SEL_SCLKMPLL 0 +#define SATA_SEL_SCLKAPLL 1 + +#define MMC_SEL_XXTI 0 +#define MMC_SEL_XUSBXTI 1 +#define MMC_SEL_SCLK_HDMI24M 2 +#define MMC_SEL_SCLK_USBPHY0 3 +#define MMC_SEL_SCLK_USBPHY1 4 +#define MMC_SEL_SCLK_HDMIPHY 5 +#define MMC_SEL_SCLKMPLL 6 +#define MMC_SEL_SCLKEPLL 7 +#define MMC_SEL_SCLKVPLL 8 + +#define MMCC0_SEL MMC_SEL_SCLKMPLL +#define MMCC1_SEL MMC_SEL_SCLKMPLL +#define MMCC2_SEL MMC_SEL_SCLKMPLL +#define MMCC3_SEL MMC_SEL_SCLKMPLL +#define MMCC4_SEL MMC_SEL_SCLKMPLL +#define CLK_SRC_FSYS_VAL ((SATA_SEL_SCLKMPLL << 24) \ + | (MMCC4_SEL << 16) \ + | (MMCC3_SEL << 12) \ + | (MMCC2_SEL << 8) \ + | (MMCC1_SEL << 4) \ + | (MMCC0_SEL << 0)) + +/* SCLK_MMC[0-4] = MOUTMMC[0-4]/(MMC[0-4]_RATIO + 1)/(MMC[0-4]_PRE_RATIO +1) */ +/* CLK_DIV_FSYS1 */ +#define MMC0_RATIO 0xF +#define MMC0_PRE_RATIO 0x0 +#define MMC1_RATIO 0xF +#define MMC1_PRE_RATIO 0x0 +#define CLK_DIV_FSYS1_VAL ((MMC1_PRE_RATIO << 24) \ + | (MMC1_RATIO << 16) \ + | (MMC0_PRE_RATIO << 8) \ + | (MMC0_RATIO << 0)) + +/* CLK_DIV_FSYS2 */ +#define MMC2_RATIO 0xF +#define MMC2_PRE_RATIO 0x0 +#define MMC3_RATIO 0xF +#define MMC3_PRE_RATIO 0x0 +#define CLK_DIV_FSYS2_VAL ((MMC3_PRE_RATIO << 24) \ + | (MMC3_RATIO << 16) \ + | (MMC2_PRE_RATIO << 8) \ + | (MMC2_RATIO << 0)) + +/* CLK_DIV_FSYS3 */ +#define MMC4_RATIO 0xF +#define MMC4_PRE_RATIO 0x0 +#define CLK_DIV_FSYS3_VAL ((MMC4_PRE_RATIO << 8) \ + | (MMC4_RATIO << 0)) + +/* CLK_SRC_PERIL0 */ +#define UART_SEL_XXTI 0 +#define UART_SEL_XUSBXTI 1 +#define UART_SEL_SCLK_HDMI24M 2 +#define UART_SEL_SCLK_USBPHY0 3 +#define UART_SEL_SCLK_USBPHY1 4 +#define UART_SEL_SCLK_HDMIPHY 5 +#define UART_SEL_SCLKMPLL 6 +#define UART_SEL_SCLKEPLL 7 +#define UART_SEL_SCLKVPLL 8 + +#define UART0_SEL UART_SEL_SCLKMPLL +#define UART1_SEL UART_SEL_SCLKMPLL +#define UART2_SEL UART_SEL_SCLKMPLL +#define UART3_SEL UART_SEL_SCLKMPLL +#define UART4_SEL UART_SEL_SCLKMPLL +#define CLK_SRC_PERIL0_VAL ((UART4_SEL << 16) \ + | (UART3_SEL << 12) \ + | (UART2_SEL << 8) \ + | (UART1_SEL << 4) \ + | (UART0_SEL << 0)) + +/* SCLK_UART[0-4] = MOUTUART[0-4]/(UART[0-4]_RATIO + 1) */ +/* CLK_DIV_PERIL0 */ +#define UART0_RATIO 7 +#define UART1_RATIO 7 +#define UART2_RATIO 7 +#define UART3_RATIO 7 +#define UART4_RATIO 7 +#define CLK_DIV_PERIL0_VAL ((UART4_RATIO << 16) \ + | (UART3_RATIO << 12) \ + | (UART2_RATIO << 8) \ + | (UART1_RATIO << 4) \ + | (UART0_RATIO << 0)) + +/* Clock Source CAM/FIMC */ +/* CLK_SRC_CAM */ +#define CAM0_SEL_XUSBXTI 1 +#define CAM1_SEL_XUSBXTI 1 +#define CSIS0_SEL_XUSBXTI 1 +#define CSIS1_SEL_XUSBXTI 1 + +#define FIMC_SEL_SCLKMPLL 6 +#define FIMC0_LCLK_SEL FIMC_SEL_SCLKMPLL +#define FIMC1_LCLK_SEL FIMC_SEL_SCLKMPLL +#define FIMC2_LCLK_SEL FIMC_SEL_SCLKMPLL +#define FIMC3_LCLK_SEL FIMC_SEL_SCLKMPLL + +#define CLK_SRC_CAM_VAL ((CSIS1_SEL_XUSBXTI << 28) \ + | (CSIS0_SEL_XUSBXTI << 24) \ + | (CAM1_SEL_XUSBXTI << 20) \ + | (CAM0_SEL_XUSBXTI << 16) \ + | (FIMC3_LCLK_SEL << 12) \ + | (FIMC2_LCLK_SEL << 8) \ + | (FIMC1_LCLK_SEL << 4) \ + | (FIMC0_LCLK_SEL << 0)) + +/* SCLK CAM */ +/* CLK_DIV_CAM */ +#define FIMC0_LCLK_RATIO 4 +#define FIMC1_LCLK_RATIO 4 +#define FIMC2_LCLK_RATIO 4 +#define FIMC3_LCLK_RATIO 4 +#define CLK_DIV_CAM_VAL ((FIMC3_LCLK_RATIO << 12) \ + | (FIMC2_LCLK_RATIO << 8) \ + | (FIMC1_LCLK_RATIO << 4) \ + | (FIMC0_LCLK_RATIO << 0)) + +/* SCLK MFC */ +/* CLK_SRC_MFC */ +#define MFC_SEL_MPLL 0 +#define MOUTMFC_0 0 +#define MFC_SEL MOUTMFC_0 +#define MFC_0_SEL MFC_SEL_MPLL +#define CLK_SRC_MFC_VAL ((MFC_SEL << 8) | (MFC_0_SEL)) + + +/* CLK_DIV_MFC */ +#define MFC_RATIO 3 +#define CLK_DIV_MFC_VAL (MFC_RATIO) + +/* SCLK G3D */ +/* CLK_SRC_G3D */ +#define G3D_SEL_MPLL 0 +#define MOUTG3D_0 0 +#define G3D_SEL MOUTG3D_0 +#define G3D_0_SEL G3D_SEL_MPLL +#define CLK_SRC_G3D_VAL ((G3D_SEL << 8) | (G3D_0_SEL)) + +/* CLK_DIV_G3D */ +#define G3D_RATIO 1 +#define CLK_DIV_G3D_VAL (G3D_RATIO) + +/* SCLK LCD0 */ +/* CLK_SRC_LCD0 */ +#define FIMD_SEL_SCLKMPLL 6 +#define MDNIE0_SEL_XUSBXTI 1 +#define MDNIE_PWM0_SEL_XUSBXTI 1 +#define MIPI0_SEL_XUSBXTI 1 +#define CLK_SRC_LCD0_VAL ((MIPI0_SEL_XUSBXTI << 12) \ + | (MDNIE_PWM0_SEL_XUSBXTI << 8) \ + | (MDNIE0_SEL_XUSBXTI << 4) \ + | (FIMD_SEL_SCLKMPLL << 0)) + +/* CLK_DIV_LCD0 */ +#define FIMD0_RATIO 4 +#define CLK_DIV_LCD0_VAL (FIMD0_RATIO) + +/* Required period to generate a stable clock output */ +/* PLL_LOCK_TIME */ +#define PLL_LOCKTIME 0x1C20 + +/* PLL Values */ +#define DISABLE 0 +#define ENABLE 1 +#define SET_PLL(mdiv, pdiv, sdiv) ((ENABLE << 31)\ + | (mdiv << 16) \ + | (pdiv << 8) \ + | (sdiv << 0)) + +/* APLL_CON0 */ +#define APLL_MDIV 0xFA +#define APLL_PDIV 0x6 +#define APLL_SDIV 0x1 +#define APLL_CON0_VAL SET_PLL(APLL_MDIV, APLL_PDIV, APLL_SDIV) + +/* APLL_CON1 */ +#define APLL_AFC_ENB 0x1 +#define APLL_AFC 0xC +#define APLL_CON1_VAL ((APLL_AFC_ENB << 31) | (APLL_AFC << 0)) + +/* MPLL_CON0 */ +#define MPLL_MDIV 0xC8 +#define MPLL_PDIV 0x6 +#define MPLL_SDIV 0x1 +#define MPLL_CON0_VAL SET_PLL(MPLL_MDIV, MPLL_PDIV, MPLL_SDIV) + +/* MPLL_CON1 */ +#define MPLL_AFC_ENB 0x0 +#define MPLL_AFC 0x1C +#define MPLL_CON1_VAL ((MPLL_AFC_ENB << 31) | (MPLL_AFC << 0)) + +/* EPLL_CON0 */ +#define EPLL_MDIV 0x30 +#define EPLL_PDIV 0x3 +#define EPLL_SDIV 0x2 +#define EPLL_CON0_VAL SET_PLL(EPLL_MDIV, EPLL_PDIV, EPLL_SDIV) + +/* EPLL_CON1 */ +#define EPLL_K 0x0 +#define EPLL_CON1_VAL (EPLL_K >> 0) + +/* VPLL_CON0 */ +#define VPLL_MDIV 0x35 +#define VPLL_PDIV 0x3 +#define VPLL_SDIV 0x2 +#define VPLL_CON0_VAL SET_PLL(VPLL_MDIV, VPLL_PDIV, VPLL_SDIV) + +/* VPLL_CON1 */ +#define VPLL_SSCG_EN DISABLE +#define VPLL_SEL_PF_DN_SPREAD 0x0 +#define VPLL_MRR 0x11 +#define VPLL_MFR 0x0 +#define VPLL_K 0x400 +#define VPLL_CON1_VAL ((VPLL_SSCG_EN << 31)\ + | (VPLL_SEL_PF_DN_SPREAD << 29) \ + | (VPLL_MRR << 24) \ + | (VPLL_MFR << 16) \ + | (VPLL_K << 0)) + +/* DMC */ +#define DIRECT_CMD_NOP 0x07000000 +#define DIRECT_CMD_ZQ 0x0a000000 +#define DIRECT_CMD_CHIP1_SHIFT (1 << 20) +#define MEM_TIMINGS_MSR_COUNT 4 +#define CTRL_START (1 << 0) +#define CTRL_DLL_ON (1 << 1) +#define AREF_EN (1 << 5) +#define DRV_TYPE (1 << 6) + +struct mem_timings { + unsigned direct_cmd_msr[MEM_TIMINGS_MSR_COUNT]; + unsigned timingref; + unsigned timingrow; + unsigned timingdata; + unsigned timingpower; + unsigned zqcontrol; + unsigned control0; + unsigned control1; + unsigned control2; + unsigned concontrol; + unsigned prechconfig; + unsigned memcontrol; + unsigned memconfig0; + unsigned memconfig1; + unsigned dll_resync; + unsigned dll_on; +}; + +/* MIU */ +/* MIU Config Register Offsets*/ +#define APB_SFR_INTERLEAVE_CONF_OFFSET 0x400 +#define APB_SFR_ARBRITATION_CONF_OFFSET 0xC00 +#define ABP_SFR_SLV_ADDRMAP_CONF_OFFSET 0x800 +#define ABP_SFR_INTERLEAVE_ADDRMAP_START_OFFSET 0x808 +#define ABP_SFR_INTERLEAVE_ADDRMAP_END_OFFSET 0x810 +#define ABP_SFR_SLV0_SINGLE_ADDRMAP_START_OFFSET 0x818 +#define ABP_SFR_SLV0_SINGLE_ADDRMAP_END_OFFSET 0x820 +#define ABP_SFR_SLV1_SINGLE_ADDRMAP_START_OFFSET 0x828 +#define ABP_SFR_SLV1_SINGLE_ADDRMAP_END_OFFSET 0x830 + +#ifdef CONFIG_ORIGEN +/* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0x7 */ +#define APB_SFR_INTERLEAVE_CONF_VAL 0x20001507 +#define APB_SFR_ARBRITATION_CONF_VAL 0x00000001 +#endif + +#define INTERLEAVE_ADDR_MAP_START_ADDR 0x40000000 +#define INTERLEAVE_ADDR_MAP_END_ADDR 0xbfffffff +#define INTERLEAVE_ADDR_MAP_EN 0x00000001 + +#ifdef CONFIG_MIU_1BIT_INTERLEAVED +/* Interleave_bit0: 0xC*/ +#define APB_SFR_INTERLEAVE_CONF_VAL 0x0000000c +#endif +#ifdef CONFIG_MIU_2BIT_INTERLEAVED +/* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0xc */ +#define APB_SFR_INTERLEAVE_CONF_VAL 0x2000150c +#endif +#define SLAVE0_SINGLE_ADDR_MAP_START_ADDR 0x40000000 +#define SLAVE0_SINGLE_ADDR_MAP_END_ADDR 0x7fffffff +#define SLAVE1_SINGLE_ADDR_MAP_START_ADDR 0x80000000 +#define SLAVE1_SINGLE_ADDR_MAP_END_ADDR 0xbfffffff +/* Enable SME0 and SME1*/ +#define APB_SFR_SLV_ADDR_MAP_CONF_VAL 0x00000006 + +#define FORCE_DLL_RESYNC 3 +#define DLL_CONTROL_ON 1 + +#define DIRECT_CMD1 0x00020000 +#define DIRECT_CMD2 0x00030000 +#define DIRECT_CMD3 0x00010002 +#define DIRECT_CMD4 0x00000328 + +#define CTRL_ZQ_MODE_NOTERM (0x1 << 0) +#define CTRL_ZQ_START (0x1 << 1) +#define CTRL_ZQ_DIV (0 << 4) +#define CTRL_ZQ_MODE_DDS (0x7 << 8) +#define CTRL_ZQ_MODE_TERM (0x2 << 11) +#define CTRL_ZQ_FORCE_IMPN (0x5 << 14) +#define CTRL_ZQ_FORCE_IMPP (0x6 << 17) +#define CTRL_DCC (0xE38 << 20) +#define ZQ_CONTROL_VAL (CTRL_ZQ_MODE_NOTERM | CTRL_ZQ_START\ + | CTRL_ZQ_DIV | CTRL_ZQ_MODE_DDS\ + | CTRL_ZQ_MODE_TERM | CTRL_ZQ_FORCE_IMPN\ + | CTRL_ZQ_FORCE_IMPP | CTRL_DCC) + +#define ASYNC (0 << 0) +#define CLK_RATIO (1 << 1) +#define DIV_PIPE (1 << 3) +#define AWR_ON (1 << 4) +#define AREF_DISABLE (0 << 5) +#define DRV_TYPE_DISABLE (0 << 6) +#define CHIP0_NOT_EMPTY (0 << 8) +#define CHIP1_NOT_EMPTY (0 << 9) +#define DQ_SWAP_DISABLE (0 << 10) +#define QOS_FAST_DISABLE (0 << 11) +#define RD_FETCH (0x3 << 12) +#define TIMEOUT_LEVEL0 (0xFFF << 16) +#define CONCONTROL_VAL (ASYNC | CLK_RATIO | DIV_PIPE | AWR_ON\ + | AREF_DISABLE | DRV_TYPE_DISABLE\ + | CHIP0_NOT_EMPTY | CHIP1_NOT_EMPTY\ + | DQ_SWAP_DISABLE | QOS_FAST_DISABLE\ + | RD_FETCH | TIMEOUT_LEVEL0) + +#define CLK_STOP_DISABLE (0 << 1) +#define DPWRDN_DISABLE (0 << 2) +#define DPWRDN_TYPE (0 << 3) +#define TP_DISABLE (0 << 4) +#define DSREF_DIABLE (0 << 5) +#define ADD_LAT_PALL (1 << 6) +#define MEM_TYPE_DDR3 (0x6 << 8) +#define MEM_WIDTH_32 (0x2 << 12) +#define NUM_CHIP_2 (1 << 16) +#define BL_8 (0x3 << 20) +#define MEMCONTROL_VAL (CLK_STOP_DISABLE | DPWRDN_DISABLE\ + | DPWRDN_TYPE | TP_DISABLE | DSREF_DIABLE\ + | ADD_LAT_PALL | MEM_TYPE_DDR3 | MEM_WIDTH_32\ + | NUM_CHIP_2 | BL_8) + + +#define CHIP_BANK_8 (0x3 << 0) +#define CHIP_ROW_14 (0x2 << 4) +#define CHIP_COL_10 (0x3 << 8) +#define CHIP_MAP_INTERLEAVED (1 << 12) +#define CHIP_MASK (0xe0 << 16) +#ifdef CONFIG_MIU_LINEAR +#define CHIP0_BASE (0x40 << 24) +#define CHIP1_BASE (0x60 << 24) +#else +#define CHIP0_BASE (0x20 << 24) +#define CHIP1_BASE (0x40 << 24) +#endif +#define MEMCONFIG0_VAL (CHIP_BANK_8 | CHIP_ROW_14 | CHIP_COL_10\ + | CHIP_MAP_INTERLEAVED | CHIP_MASK | CHIP0_BASE) +#define MEMCONFIG1_VAL (CHIP_BANK_8 | CHIP_ROW_14 | CHIP_COL_10\ + | CHIP_MAP_INTERLEAVED | CHIP_MASK | CHIP1_BASE) + +#define TP_CNT (0xff << 24) +#define PRECHCONFIG TP_CNT + +#define CTRL_OFF (0 << 0) +#define CTRL_DLL_OFF (0 << 1) +#define CTRL_HALF (0 << 2) +#define CTRL_DFDQS (1 << 3) +#define DQS_DELAY (0 << 4) +#define CTRL_START_POINT (0x10 << 8) +#define CTRL_INC (0x10 << 16) +#define CTRL_FORCE (0x71 << 24) +#define CONTROL0_VAL (CTRL_OFF | CTRL_DLL_OFF | CTRL_HALF\ + | CTRL_DFDQS | DQS_DELAY | CTRL_START_POINT\ + | CTRL_INC | CTRL_FORCE) + +#define CTRL_SHIFTC (0x6 << 0) +#define CTRL_REF (8 << 4) +#define CTRL_SHGATE (1 << 29) +#define TERM_READ_EN (1 << 30) +#define TERM_WRITE_EN (1 << 31) +#define CONTROL1_VAL (CTRL_SHIFTC | CTRL_REF | CTRL_SHGATE\ + | TERM_READ_EN | TERM_WRITE_EN) + +#define CONTROL2_VAL 0x00000000 + +#ifdef CONFIG_ORIGEN +#define TIMINGREF_VAL 0x000000BB +#define TIMINGROW_VAL 0x4046654f +#define TIMINGDATA_VAL 0x46400506 +#define TIMINGPOWER_VAL 0x52000A3C +#else +#define TIMINGREF_VAL 0x000000BC +#ifdef DRAM_CLK_330 +#define TIMINGROW_VAL 0x3545548d +#define TIMINGDATA_VAL 0x45430506 +#define TIMINGPOWER_VAL 0x4439033c +#endif +#ifdef DRAM_CLK_400 +#define TIMINGROW_VAL 0x45430506 +#define TIMINGDATA_VAL 0x56500506 +#define TIMINGPOWER_VAL 0x5444033d +#endif +#endif +#endif diff --git a/arch/arm/cpu/armv7/exynos/exynos5_setup.h b/arch/arm/cpu/armv7/exynos/exynos5_setup.h new file mode 100644 index 0000000..8f36c16 --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/exynos5_setup.h @@ -0,0 +1,567 @@ +/* + * Machine Specific Values for SMDK5250 board based on EXYNOS5 + * + * Copyright (C) 2012 Samsung Electronics + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SMDK5250_SETUP_H +#define _SMDK5250_SETUP_H + +#include <config.h> +#include <asm/arch/dmc.h> + +/* APLL_CON1 */ +#define APLL_CON1_VAL (0x00203800) + +/* MPLL_CON1 */ +#define MPLL_CON1_VAL (0x00203800) + +/* CPLL_CON1 */ +#define CPLL_CON1_VAL (0x00203800) + +/* GPLL_CON1 */ +#define GPLL_CON1_VAL (0x00203800) + +/* EPLL_CON1, CON2 */ +#define EPLL_CON1_VAL 0x00000000 +#define EPLL_CON2_VAL 0x00000080 + +/* VPLL_CON1, CON2 */ +#define VPLL_CON1_VAL 0x00000000 +#define VPLL_CON2_VAL 0x00000080 + +/* BPLL_CON1 */ +#define BPLL_CON1_VAL 0x00203800 + +/* Set PLL */ +#define set_pll(mdiv, pdiv, sdiv) (1<<31 | mdiv<<16 | pdiv<<8 | sdiv) + +/* CLK_SRC_CPU */ +/* 0 = MOUTAPLL, 1 = SCLKMPLL */ +#define MUX_HPM_SEL 0 +#define MUX_CPU_SEL 0 +#define MUX_APLL_SEL 1 + +#define CLK_SRC_CPU_VAL ((MUX_HPM_SEL << 20) \ + | (MUX_CPU_SEL << 16) \ + | (MUX_APLL_SEL)) + +/* MEMCONTROL register bit fields */ +#define DMC_MEMCONTROL_CLK_STOP_DISABLE (0 << 0) +#define DMC_MEMCONTROL_DPWRDN_DISABLE (0 << 1) +#define DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE (0 << 2) +#define DMC_MEMCONTROL_TP_DISABLE (0 << 4) +#define DMC_MEMCONTROL_DSREF_DISABLE (0 << 5) +#define DMC_MEMCONTROL_DSREF_ENABLE (1 << 5) +#define DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(x) (x << 6) + +#define DMC_MEMCONTROL_MEM_TYPE_LPDDR3 (7 << 8) +#define DMC_MEMCONTROL_MEM_TYPE_DDR3 (6 << 8) +#define DMC_MEMCONTROL_MEM_TYPE_LPDDR2 (5 << 8) + +#define DMC_MEMCONTROL_MEM_WIDTH_32BIT (2 << 12) + +#define DMC_MEMCONTROL_NUM_CHIP_1 (0 << 16) +#define DMC_MEMCONTROL_NUM_CHIP_2 (1 << 16) + +#define DMC_MEMCONTROL_BL_8 (3 << 20) +#define DMC_MEMCONTROL_BL_4 (2 << 20) + +#define DMC_MEMCONTROL_PZQ_DISABLE (0 << 24) + +#define DMC_MEMCONTROL_MRR_BYTE_7_0 (0 << 25) +#define DMC_MEMCONTROL_MRR_BYTE_15_8 (1 << 25) +#define DMC_MEMCONTROL_MRR_BYTE_23_16 (2 << 25) +#define DMC_MEMCONTROL_MRR_BYTE_31_24 (3 << 25) + +/* MEMCONFIG0 register bit fields */ +#define DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED (1 << 12) +#define DMC_MEMCONFIGX_CHIP_COL_10 (3 << 8) +#define DMC_MEMCONFIGX_CHIP_ROW_14 (2 << 4) +#define DMC_MEMCONFIGX_CHIP_ROW_15 (3 << 4) +#define DMC_MEMCONFIGX_CHIP_BANK_8 (3 << 0) + +#define DMC_MEMBASECONFIGX_CHIP_BASE(x) (x << 16) +#define DMC_MEMBASECONFIGX_CHIP_MASK(x) (x << 0) +#define DMC_MEMBASECONFIG_VAL(x) ( \ + DMC_MEMBASECONFIGX_CHIP_BASE(x) | \ + DMC_MEMBASECONFIGX_CHIP_MASK(0x780) \ +) + +#define DMC_MEMBASECONFIG0_VAL DMC_MEMBASECONFIG_VAL(0x40) +#define DMC_MEMBASECONFIG1_VAL DMC_MEMBASECONFIG_VAL(0x80) + +#define DMC_PRECHCONFIG_VAL 0xFF000000 +#define DMC_PWRDNCONFIG_VAL 0xFFFF00FF + +#define DMC_CONCONTROL_RESET_VAL 0x0FFF0000 +#define DFI_INIT_START (1 << 28) +#define EMPTY (1 << 8) +#define AREF_EN (1 << 5) + +#define DFI_INIT_COMPLETE_CHO (1 << 2) +#define DFI_INIT_COMPLETE_CH1 (1 << 3) + +#define RDLVL_COMPLETE_CHO (1 << 14) +#define RDLVL_COMPLETE_CH1 (1 << 15) + +#define CLK_STOP_EN (1 << 0) +#define DPWRDN_EN (1 << 1) +#define DSREF_EN (1 << 5) + +/* COJCONTROL register bit fields */ +#define DMC_CONCONTROL_IO_PD_CON_DISABLE (0 << 3) +#define DMC_CONCONTROL_AREF_EN_DISABLE (0 << 5) +#define DMC_CONCONTROL_EMPTY_DISABLE (0 << 8) +#define DMC_CONCONTROL_EMPTY_ENABLE (1 << 8) +#define DMC_CONCONTROL_RD_FETCH_DISABLE (0x0 << 12) +#define DMC_CONCONTROL_TIMEOUT_LEVEL0 (0xFFF << 16) +#define DMC_CONCONTROL_DFI_INIT_START_DISABLE (0 << 28) + +/* CLK_DIV_CPU0_VAL */ +#define CLK_DIV_CPU0_VAL ((ARM2_RATIO << 28) \ + | (APLL_RATIO << 24) \ + | (PCLK_DBG_RATIO << 20) \ + | (ATB_RATIO << 16) \ + | (PERIPH_RATIO << 12) \ + | (ACP_RATIO << 8) \ + | (CPUD_RATIO << 4) \ + | (ARM_RATIO)) + + +/* CLK_FSYS */ +#define CLK_SRC_FSYS0_VAL 0x66666 +#define CLK_DIV_FSYS0_VAL 0x0BB00000 + +/* CLK_DIV_CPU1 */ +#define HPM_RATIO 0x2 +#define COPY_RATIO 0x0 + +/* CLK_DIV_CPU1 = 0x00000003 */ +#define CLK_DIV_CPU1_VAL ((HPM_RATIO << 4) \ + | (COPY_RATIO)) + +/* CLK_SRC_CORE0 */ +#define CLK_SRC_CORE0_VAL 0x00000000 + +/* CLK_SRC_CORE1 */ +#define CLK_SRC_CORE1_VAL 0x100 + +/* CLK_DIV_CORE0 */ +#define CLK_DIV_CORE0_VAL 0x00120000 + +/* CLK_DIV_CORE1 */ +#define CLK_DIV_CORE1_VAL 0x07070700 + +/* CLK_DIV_SYSRGT */ +#define CLK_DIV_SYSRGT_VAL 0x00000111 + +/* CLK_DIV_ACP */ +#define CLK_DIV_ACP_VAL 0x12 + +/* CLK_DIV_SYSLFT */ +#define CLK_DIV_SYSLFT_VAL 0x00000311 + +/* CLK_SRC_CDREX */ +#define CLK_SRC_CDREX_VAL 0x1 + +/* CLK_DIV_CDREX */ +#define MCLK_CDREX2_RATIO 0x0 +#define ACLK_EFCON_RATIO 0x1 +#define MCLK_DPHY_RATIO 0x1 +#define MCLK_CDREX_RATIO 0x1 +#define ACLK_C2C_200_RATIO 0x1 +#define C2C_CLK_400_RATIO 0x1 +#define PCLK_CDREX_RATIO 0x1 +#define ACLK_CDREX_RATIO 0x1 + +#define CLK_DIV_CDREX_VAL ((MCLK_DPHY_RATIO << 24) \ + | (C2C_CLK_400_RATIO << 6) \ + | (PCLK_CDREX_RATIO << 4) \ + | (ACLK_CDREX_RATIO)) + +/* CLK_SRC_TOP0 */ +#define MUX_ACLK_300_GSCL_SEL 0x0 +#define MUX_ACLK_300_GSCL_MID_SEL 0x0 +#define MUX_ACLK_400_G3D_MID_SEL 0x0 +#define MUX_ACLK_333_SEL 0x0 +#define MUX_ACLK_300_DISP1_SEL 0x0 +#define MUX_ACLK_300_DISP1_MID_SEL 0x0 +#define MUX_ACLK_200_SEL 0x0 +#define MUX_ACLK_166_SEL 0x0 +#define CLK_SRC_TOP0_VAL ((MUX_ACLK_300_GSCL_SEL << 25) \ + | (MUX_ACLK_300_GSCL_MID_SEL << 24) \ + | (MUX_ACLK_400_G3D_MID_SEL << 20) \ + | (MUX_ACLK_333_SEL << 16) \ + | (MUX_ACLK_300_DISP1_SEL << 15) \ + | (MUX_ACLK_300_DISP1_MID_SEL << 14) \ + | (MUX_ACLK_200_SEL << 12) \ + | (MUX_ACLK_166_SEL << 8)) + +/* CLK_SRC_TOP1 */ +#define MUX_ACLK_400_G3D_SEL 0x1 +#define MUX_ACLK_400_ISP_SEL 0x0 +#define MUX_ACLK_400_IOP_SEL 0x0 +#define MUX_ACLK_MIPI_HSI_TXBASE_SEL 0x0 +#define MUX_ACLK_300_GSCL_MID1_SEL 0x0 +#define MUX_ACLK_300_DISP1_MID1_SEL 0x0 +#define CLK_SRC_TOP1_VAL ((MUX_ACLK_400_G3D_SEL << 28) \ + |(MUX_ACLK_400_ISP_SEL << 24) \ + |(MUX_ACLK_400_IOP_SEL << 20) \ + |(MUX_ACLK_MIPI_HSI_TXBASE_SEL << 16) \ + |(MUX_ACLK_300_GSCL_MID1_SEL << 12) \ + |(MUX_ACLK_300_DISP1_MID1_SEL << 8)) + +/* CLK_SRC_TOP2 */ +#define MUX_GPLL_SEL 0x1 +#define MUX_BPLL_USER_SEL 0x0 +#define MUX_MPLL_USER_SEL 0x0 +#define MUX_VPLL_SEL 0x1 +#define MUX_EPLL_SEL 0x1 +#define MUX_CPLL_SEL 0x1 +#define VPLLSRC_SEL 0x0 +#define CLK_SRC_TOP2_VAL ((MUX_GPLL_SEL << 28) \ + | (MUX_BPLL_USER_SEL << 24) \ + | (MUX_MPLL_USER_SEL << 20) \ + | (MUX_VPLL_SEL << 16) \ + | (MUX_EPLL_SEL << 12) \ + | (MUX_CPLL_SEL << 8) \ + | (VPLLSRC_SEL)) +/* CLK_SRC_TOP3 */ +#define MUX_ACLK_333_SUB_SEL 0x1 +#define MUX_ACLK_400_SUB_SEL 0x1 +#define MUX_ACLK_266_ISP_SUB_SEL 0x1 +#define MUX_ACLK_266_GPS_SUB_SEL 0x0 +#define MUX_ACLK_300_GSCL_SUB_SEL 0x1 +#define MUX_ACLK_266_GSCL_SUB_SEL 0x1 +#define MUX_ACLK_300_DISP1_SUB_SEL 0x1 +#define MUX_ACLK_200_DISP1_SUB_SEL 0x1 +#define CLK_SRC_TOP3_VAL ((MUX_ACLK_333_SUB_SEL << 24) \ + | (MUX_ACLK_400_SUB_SEL << 20) \ + | (MUX_ACLK_266_ISP_SUB_SEL << 16) \ + | (MUX_ACLK_266_GPS_SUB_SEL << 12) \ + | (MUX_ACLK_300_GSCL_SUB_SEL << 10) \ + | (MUX_ACLK_266_GSCL_SUB_SEL << 8) \ + | (MUX_ACLK_300_DISP1_SUB_SEL << 6) \ + | (MUX_ACLK_200_DISP1_SUB_SEL << 4)) + +/* CLK_DIV_TOP0 */ +#define ACLK_300_DISP1_RATIO 0x2 +#define ACLK_400_G3D_RATIO 0x0 +#define ACLK_333_RATIO 0x0 +#define ACLK_266_RATIO 0x2 +#define ACLK_200_RATIO 0x3 +#define ACLK_166_RATIO 0x1 +#define ACLK_133_RATIO 0x1 +#define ACLK_66_RATIO 0x5 + +#define CLK_DIV_TOP0_VAL ((ACLK_300_DISP1_RATIO << 28) \ + | (ACLK_400_G3D_RATIO << 24) \ + | (ACLK_333_RATIO << 20) \ + | (ACLK_266_RATIO << 16) \ + | (ACLK_200_RATIO << 12) \ + | (ACLK_166_RATIO << 8) \ + | (ACLK_133_RATIO << 4) \ + | (ACLK_66_RATIO)) + +/* CLK_DIV_TOP1 */ +#define ACLK_MIPI_HSI_TX_BASE_RATIO 0x3 +#define ACLK_66_PRE_RATIO 0x1 +#define ACLK_400_ISP_RATIO 0x1 +#define ACLK_400_IOP_RATIO 0x1 +#define ACLK_300_GSCL_RATIO 0x2 + +#define CLK_DIV_TOP1_VAL ((ACLK_MIPI_HSI_TX_BASE_RATIO << 28) \ + | (ACLK_66_PRE_RATIO << 24) \ + | (ACLK_400_ISP_RATIO << 20) \ + | (ACLK_400_IOP_RATIO << 16) \ + | (ACLK_300_GSCL_RATIO << 12)) + +/* APLL_LOCK */ +#define APLL_LOCK_VAL (0x546) +/* MPLL_LOCK */ +#define MPLL_LOCK_VAL (0x546) +/* CPLL_LOCK */ +#define CPLL_LOCK_VAL (0x546) +/* GPLL_LOCK */ +#define GPLL_LOCK_VAL (0x546) +/* EPLL_LOCK */ +#define EPLL_LOCK_VAL (0x3A98) +/* VPLL_LOCK */ +#define VPLL_LOCK_VAL (0x3A98) +/* BPLL_LOCK */ +#define BPLL_LOCK_VAL (0x546) + +#define MUX_APLL_SEL_MASK (1 << 0) +#define MUX_MPLL_SEL_MASK (1 << 8) +#define MPLL_SEL_MOUT_MPLLFOUT (2 << 8) +#define MUX_CPLL_SEL_MASK (1 << 8) +#define MUX_EPLL_SEL_MASK (1 << 12) +#define MUX_VPLL_SEL_MASK (1 << 16) +#define MUX_GPLL_SEL_MASK (1 << 28) +#define MUX_BPLL_SEL_MASK (1 << 0) +#define MUX_HPM_SEL_MASK (1 << 20) +#define HPM_SEL_SCLK_MPLL (1 << 21) +#define APLL_CON0_LOCKED (1 << 29) +#define MPLL_CON0_LOCKED (1 << 29) +#define BPLL_CON0_LOCKED (1 << 29) +#define CPLL_CON0_LOCKED (1 << 29) +#define EPLL_CON0_LOCKED (1 << 29) +#define GPLL_CON0_LOCKED (1 << 29) +#define VPLL_CON0_LOCKED (1 << 29) +#define CLK_REG_DISABLE 0x0 +#define TOP2_VAL 0x0110000 + +/* CLK_SRC_PERIC0 */ +#define PWM_SEL 6 +#define UART3_SEL 6 +#define UART2_SEL 6 +#define UART1_SEL 6 +#define UART0_SEL 6 +/* SRC_CLOCK = SCLK_MPLL */ +#define CLK_SRC_PERIC0_VAL ((PWM_SEL << 24) \ + | (UART3_SEL << 12) \ + | (UART2_SEL << 8) \ + | (UART1_SEL << 4) \ + | (UART0_SEL)) + +/* CLK_SRC_PERIC1 */ +/* SRC_CLOCK = SCLK_MPLL */ +#define SPI0_SEL 6 +#define SPI1_SEL 6 +#define SPI2_SEL 6 +#define CLK_SRC_PERIC1_VAL ((SPI2_SEL << 24) \ + | (SPI1_SEL << 20) \ + | (SPI0_SEL << 16)) + +/* SCLK_SRC_ISP - set SPI0/1 to 6 = SCLK_MPLL_USER */ +#define SPI0_ISP_SEL 6 +#define SPI1_ISP_SEL 6 +#define SCLK_SRC_ISP_VAL (SPI1_ISP_SEL << 4) \ + | (SPI0_ISP_SEL << 0) + +/* SCLK_DIV_ISP - set SPI0/1 to 0xf = divide by 16 */ +#define SPI0_ISP_RATIO 0xf +#define SPI1_ISP_RATIO 0xf +#define SCLK_DIV_ISP_VAL (SPI1_ISP_RATIO << 12) \ + | (SPI0_ISP_RATIO << 0) + +/* CLK_DIV_PERIL0 */ +#define UART5_RATIO 7 +#define UART4_RATIO 7 +#define UART3_RATIO 7 +#define UART2_RATIO 7 +#define UART1_RATIO 7 +#define UART0_RATIO 7 + +#define CLK_DIV_PERIC0_VAL ((UART3_RATIO << 12) \ + | (UART2_RATIO << 8) \ + | (UART1_RATIO << 4) \ + | (UART0_RATIO)) +/* CLK_DIV_PERIC1 */ +#define SPI1_RATIO 0x7 +#define SPI0_RATIO 0xf +#define SPI1_SUB_RATIO 0x0 +#define SPI0_SUB_RATIO 0x0 +#define CLK_DIV_PERIC1_VAL ((SPI1_SUB_RATIO << 24) \ + | ((SPI1_RATIO << 16) \ + | (SPI0_SUB_RATIO << 8) \ + | (SPI0_RATIO << 0))) + +/* CLK_DIV_PERIC2 */ +#define SPI2_RATIO 0xf +#define SPI2_SUB_RATIO 0x0 +#define CLK_DIV_PERIC2_VAL ((SPI2_SUB_RATIO << 8) \ + | (SPI2_RATIO << 0)) + +/* CLK_DIV_PERIC3 */ +#define PWM_RATIO 8 +#define CLK_DIV_PERIC3_VAL (PWM_RATIO << 0) + +/* CLK_DIV_FSYS2 */ +#define MMC2_RATIO_MASK 0xf +#define MMC2_RATIO_VAL 0x3 +#define MMC2_RATIO_OFFSET 0 + +#define MMC2_PRE_RATIO_MASK 0xff +#define MMC2_PRE_RATIO_VAL 0x9 +#define MMC2_PRE_RATIO_OFFSET 8 + +#define MMC3_RATIO_MASK 0xf +#define MMC3_RATIO_VAL 0x1 +#define MMC3_RATIO_OFFSET 16 + +#define MMC3_PRE_RATIO_MASK 0xff +#define MMC3_PRE_RATIO_VAL 0x0 +#define MMC3_PRE_RATIO_OFFSET 24 + +/* CLK_SRC_LEX */ +#define CLK_SRC_LEX_VAL 0x0 + +/* CLK_DIV_LEX */ +#define CLK_DIV_LEX_VAL 0x10 + +/* CLK_DIV_R0X */ +#define CLK_DIV_R0X_VAL 0x10 + +/* CLK_DIV_L0X */ +#define CLK_DIV_R1X_VAL 0x10 + +/* CLK_DIV_ISP0 */ +#define CLK_DIV_ISP0_VAL 0x31 + +/* CLK_DIV_ISP1 */ +#define CLK_DIV_ISP1_VAL 0x0 + +/* CLK_DIV_ISP2 */ +#define CLK_DIV_ISP2_VAL 0x1 + +/* CLK_SRC_DISP1_0 */ +#define CLK_SRC_DISP1_0_VAL 0x6 + +/* + * DIV_DISP1_0 + * For DP, divisor should be 2 + */ +#define CLK_DIV_DISP1_0_FIMD1 (2 << 0) + +/* CLK_GATE_IP_DISP1 */ +#define CLK_GATE_DP1_ALLOW (1 << 4) + +#define DDR3PHY_CTRL_PHY_RESET (1 << 0) +#define DDR3PHY_CTRL_PHY_RESET_OFF (0 << 0) + +#define PHY_CON0_RESET_VAL 0x17020a40 +#define P0_CMD_EN (1 << 14) +#define BYTE_RDLVL_EN (1 << 13) +#define CTRL_SHGATE (1 << 8) + +#define PHY_CON1_RESET_VAL 0x09210100 +#define CTRL_GATEDURADJ_MASK (0xf << 20) + +#define PHY_CON2_RESET_VAL 0x00010004 +#define INIT_DESKEW_EN (1 << 6) +#define RDLVL_GATE_EN (1 << 24) + +/*ZQ Configurations */ +#define PHY_CON16_RESET_VAL 0x08000304 + +#define ZQ_CLK_DIV_EN (1 << 18) +#define ZQ_MANUAL_STR (1 << 1) +#define ZQ_DONE (1 << 0) + +#define CTRL_RDLVL_GATE_ENABLE 1 +#define CTRL_RDLVL_GATE_DISABLE 1 + +/* Direct Command */ +#define DIRECT_CMD_NOP 0x07000000 +#define DIRECT_CMD_PALL 0x01000000 +#define DIRECT_CMD_ZQINIT 0x0a000000 +#define DIRECT_CMD_CHANNEL_SHIFT 28 +#define DIRECT_CMD_CHIP_SHIFT 20 + +/* DMC PHY Control0 register */ +#define PHY_CONTROL0_RESET_VAL 0x0 +#define MEM_TERM_EN (1 << 31) /* Termination enable for memory */ +#define PHY_TERM_EN (1 << 30) /* Termination enable for PHY */ +#define DMC_CTRL_SHGATE (1 << 29) /* Duration of DQS gating signal */ +#define FP_RSYNC (1 << 3) /* Force DLL resyncronization */ + +/* Driver strength for CK, CKE, CS & CA */ +#define IMP_OUTPUT_DRV_40_OHM 0x5 +#define IMP_OUTPUT_DRV_30_OHM 0x7 +#define CA_CK_DRVR_DS_OFFSET 9 +#define CA_CKE_DRVR_DS_OFFSET 6 +#define CA_CS_DRVR_DS_OFFSET 3 +#define CA_ADR_DRVR_DS_OFFSET 0 + +#define PHY_CON42_CTRL_BSTLEN_SHIFT 8 +#define PHY_CON42_CTRL_RDLAT_SHIFT 0 + +struct mem_timings; + +/* Errors that we can encourter in low-level setup */ +enum { + SETUP_ERR_OK, + SETUP_ERR_RDLV_COMPLETE_TIMEOUT = -1, + SETUP_ERR_ZQ_CALIBRATION_FAILURE = -2, +}; + +/* + * Memory variant specific initialization code + * + * @param mem Memory timings for this memory type. + * @param mem_iv_size Memory interleaving size is a configurable parameter + * which the DMC uses to decide how to split a memory + * chunk into smaller chunks to support concurrent + * accesses; may vary across boards. + * @param reset Reset DDR PHY during initialization. + * @return 0 if ok, SETUP_ERR_... if there is a problem + */ +int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size, + int reset); + +/* + * Configure ZQ I/O interface + * + * @param mem Memory timings for this memory type. + * @param phy0_ctrl Pointer to struct containing PHY0 control reg + * @param phy1_ctrl Pointer to struct containing PHY1 control reg + * @return 0 if ok, -1 on error + */ +int dmc_config_zq(struct mem_timings *mem, + struct exynos5_phy_control *phy0_ctrl, + struct exynos5_phy_control *phy1_ctrl); + +/* + * Send NOP and MRS/EMRS Direct commands + * + * @param mem Memory timings for this memory type. + * @param dmc Pointer to struct of DMC registers + */ +void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc); + +/* + * Send PALL Direct commands + * + * @param mem Memory timings for this memory type. + * @param dmc Pointer to struct of DMC registers + */ +void dmc_config_prech(struct mem_timings *mem, struct exynos5_dmc *dmc); + +/* + * Configure the memconfig and membaseconfig registers + * + * @param mem Memory timings for this memory type. + * @param exynos5_dmc Pointer to struct of DMC registers + */ +void dmc_config_memory(struct mem_timings *mem, struct exynos5_dmc *dmc); + +/* + * Reset the DLL. This function is common between DDR3 and LPDDR2. + * However, the reset value is different. So we are passing a flag + * ddr_mode to distinguish between LPDDR2 and DDR3. + * + * @param exynos5_dmc Pointer to struct of DMC registers + * @param ddr_mode Type of DDR memory + */ +void update_reset_dll(struct exynos5_dmc *, enum ddr_mode); +#endif diff --git a/arch/arm/cpu/armv7/exynos/lowlevel_init.c b/arch/arm/cpu/armv7/exynos/lowlevel_init.c new file mode 100644 index 0000000..11fe5b8 --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/lowlevel_init.c @@ -0,0 +1,73 @@ +/* + * Lowlevel setup for EXYNOS5 based board + * + * Copyright (C) 2013 Samsung Electronics + * Rajeshwari Shinde <rajeshwari.s@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <config.h> +#include <asm/arch/cpu.h> +#include <asm/arch/dmc.h> +#include <asm/arch/power.h> +#include <asm/arch/tzpc.h> +#include <asm/arch/periph.h> +#include <asm/arch/pinmux.h> +#include "common_setup.h" + +/* These are the things we can do during low-level init */ +enum { + DO_WAKEUP = 1 << 0, + DO_CLOCKS = 1 << 1, + DO_MEM_RESET = 1 << 2, + DO_UART = 1 << 3, +}; + +int do_lowlevel_init(void) +{ + uint32_t reset_status; + int actions = 0; + + arch_cpu_init(); + + reset_status = get_reset_status(); + + switch (reset_status) { + case S5P_CHECK_SLEEP: + actions = DO_CLOCKS | DO_WAKEUP; + break; + case S5P_CHECK_DIDLE: + case S5P_CHECK_LPA: + actions = DO_WAKEUP; + break; + default: + /* This is a normal boot (not a wake from sleep) */ + actions = DO_CLOCKS | DO_MEM_RESET; + } + + if (actions & DO_CLOCKS) { + system_clock_init(); + mem_ctrl_init(actions & DO_MEM_RESET); + tzpc_init(); + } + + return actions & DO_WAKEUP; +} diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c new file mode 100644 index 0000000..2042062 --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -0,0 +1,518 @@ +/* + * Copyright (c) 2012 Samsung Electronics. + * Abhilash Kesavan <a.kesavan@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <fdtdec.h> +#include <asm/arch/gpio.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/sromc.h> + +static void exynos5_uart_config(int peripheral) +{ + struct exynos5_gpio_part1 *gpio1 = + (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); + struct s5p_gpio_bank *bank; + int i, start, count; + + switch (peripheral) { + case PERIPH_ID_UART0: + bank = &gpio1->a0; + start = 0; + count = 4; + break; + case PERIPH_ID_UART1: + bank = &gpio1->d0; + start = 0; + count = 4; + break; + case PERIPH_ID_UART2: + bank = &gpio1->a1; + start = 0; + count = 4; + break; + case PERIPH_ID_UART3: + bank = &gpio1->a1; + start = 4; + count = 2; + break; + } + for (i = start; i < start + count; i++) { + s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE); + s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2)); + } +} + +static int exynos5_mmc_config(int peripheral, int flags) +{ + struct exynos5_gpio_part1 *gpio1 = + (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); + struct s5p_gpio_bank *bank, *bank_ext; + int i, start = 0, gpio_func = 0; + + switch (peripheral) { + case PERIPH_ID_SDMMC0: + bank = &gpio1->c0; + bank_ext = &gpio1->c1; + start = 0; + gpio_func = GPIO_FUNC(0x2); + break; + case PERIPH_ID_SDMMC1: + bank = &gpio1->c2; + bank_ext = NULL; + break; + case PERIPH_ID_SDMMC2: + bank = &gpio1->c3; + bank_ext = &gpio1->c4; + start = 3; + gpio_func = GPIO_FUNC(0x3); + break; + case PERIPH_ID_SDMMC3: + bank = &gpio1->c4; + bank_ext = NULL; + break; + } + if ((flags & PINMUX_FLAG_8BIT_MODE) && !bank_ext) { + debug("SDMMC device %d does not support 8bit mode", + peripheral); + return -1; + } + if (flags & PINMUX_FLAG_8BIT_MODE) { + for (i = start; i <= (start + 3); i++) { + s5p_gpio_cfg_pin(bank_ext, i, gpio_func); + s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_UP); + s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X); + } + } + for (i = 0; i < 2; i++) { + s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2)); + s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE); + s5p_gpio_set_drv(bank, i, GPIO_DRV_4X); + } + for (i = 3; i <= 6; i++) { + s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2)); + s5p_gpio_set_pull(bank, i, GPIO_PULL_UP); + s5p_gpio_set_drv(bank, i, GPIO_DRV_4X); + } + + return 0; +} + +static void exynos5_sromc_config(int flags) +{ + struct exynos5_gpio_part1 *gpio1 = + (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); + int i; + + /* + * SROM:CS1 and EBI + * + * GPY0[0] SROM_CSn[0] + * GPY0[1] SROM_CSn[1](2) + * GPY0[2] SROM_CSn[2] + * GPY0[3] SROM_CSn[3] + * GPY0[4] EBI_OEn(2) + * GPY0[5] EBI_EEn(2) + * + * GPY1[0] EBI_BEn[0](2) + * GPY1[1] EBI_BEn[1](2) + * GPY1[2] SROM_WAIT(2) + * GPY1[3] EBI_DATA_RDn(2) + */ + s5p_gpio_cfg_pin(&gpio1->y0, (flags & PINMUX_FLAG_BANK), + GPIO_FUNC(2)); + s5p_gpio_cfg_pin(&gpio1->y0, 4, GPIO_FUNC(2)); + s5p_gpio_cfg_pin(&gpio1->y0, 5, GPIO_FUNC(2)); + + for (i = 0; i < 4; i++) + s5p_gpio_cfg_pin(&gpio1->y1, i, GPIO_FUNC(2)); + + /* + * EBI: 8 Addrss Lines + * + * GPY3[0] EBI_ADDR[0](2) + * GPY3[1] EBI_ADDR[1](2) + * GPY3[2] EBI_ADDR[2](2) + * GPY3[3] EBI_ADDR[3](2) + * GPY3[4] EBI_ADDR[4](2) + * GPY3[5] EBI_ADDR[5](2) + * GPY3[6] EBI_ADDR[6](2) + * GPY3[7] EBI_ADDR[7](2) + * + * EBI: 16 Data Lines + * + * GPY5[0] EBI_DATA[0](2) + * GPY5[1] EBI_DATA[1](2) + * GPY5[2] EBI_DATA[2](2) + * GPY5[3] EBI_DATA[3](2) + * GPY5[4] EBI_DATA[4](2) + * GPY5[5] EBI_DATA[5](2) + * GPY5[6] EBI_DATA[6](2) + * GPY5[7] EBI_DATA[7](2) + * + * GPY6[0] EBI_DATA[8](2) + * GPY6[1] EBI_DATA[9](2) + * GPY6[2] EBI_DATA[10](2) + * GPY6[3] EBI_DATA[11](2) + * GPY6[4] EBI_DATA[12](2) + * GPY6[5] EBI_DATA[13](2) + * GPY6[6] EBI_DATA[14](2) + * GPY6[7] EBI_DATA[15](2) + */ + for (i = 0; i < 8; i++) { + s5p_gpio_cfg_pin(&gpio1->y3, i, GPIO_FUNC(2)); + s5p_gpio_set_pull(&gpio1->y3, i, GPIO_PULL_UP); + + s5p_gpio_cfg_pin(&gpio1->y5, i, GPIO_FUNC(2)); + s5p_gpio_set_pull(&gpio1->y5, i, GPIO_PULL_UP); + + s5p_gpio_cfg_pin(&gpio1->y6, i, GPIO_FUNC(2)); + s5p_gpio_set_pull(&gpio1->y6, i, GPIO_PULL_UP); + } +} + +static void exynos5_i2c_config(int peripheral, int flags) +{ + + struct exynos5_gpio_part1 *gpio1 = + (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); + + switch (peripheral) { + case PERIPH_ID_I2C0: + s5p_gpio_cfg_pin(&gpio1->b3, 0, GPIO_FUNC(0x2)); + s5p_gpio_cfg_pin(&gpio1->b3, 1, GPIO_FUNC(0x2)); + break; + case PERIPH_ID_I2C1: + s5p_gpio_cfg_pin(&gpio1->b3, 2, GPIO_FUNC(0x2)); + s5p_gpio_cfg_pin(&gpio1->b3, 3, GPIO_FUNC(0x2)); + break; + case PERIPH_ID_I2C2: + s5p_gpio_cfg_pin(&gpio1->a0, 6, GPIO_FUNC(0x3)); + s5p_gpio_cfg_pin(&gpio1->a0, 7, GPIO_FUNC(0x3)); + break; + case PERIPH_ID_I2C3: + s5p_gpio_cfg_pin(&gpio1->a1, 2, GPIO_FUNC(0x3)); + s5p_gpio_cfg_pin(&gpio1->a1, 3, GPIO_FUNC(0x3)); + break; + case PERIPH_ID_I2C4: + s5p_gpio_cfg_pin(&gpio1->a2, 0, GPIO_FUNC(0x3)); + s5p_gpio_cfg_pin(&gpio1->a2, 1, GPIO_FUNC(0x3)); + break; + case PERIPH_ID_I2C5: + s5p_gpio_cfg_pin(&gpio1->a2, 2, GPIO_FUNC(0x3)); + s5p_gpio_cfg_pin(&gpio1->a2, 3, GPIO_FUNC(0x3)); + break; + case PERIPH_ID_I2C6: + s5p_gpio_cfg_pin(&gpio1->b1, 3, GPIO_FUNC(0x4)); + s5p_gpio_cfg_pin(&gpio1->b1, 4, GPIO_FUNC(0x4)); + break; + case PERIPH_ID_I2C7: + s5p_gpio_cfg_pin(&gpio1->b2, 2, GPIO_FUNC(0x3)); + s5p_gpio_cfg_pin(&gpio1->b2, 3, GPIO_FUNC(0x3)); + break; + } +} + +static void exynos5_i2s_config(int peripheral) +{ + int i; + struct exynos5_gpio_part1 *gpio1 = + (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); + + for (i = 0; i < 5; i++) + s5p_gpio_cfg_pin(&gpio1->b0, i, GPIO_FUNC(0x02)); +} + +void exynos5_spi_config(int peripheral) +{ + int cfg = 0, pin = 0, i; + struct s5p_gpio_bank *bank = NULL; + struct exynos5_gpio_part1 *gpio1 = + (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); + struct exynos5_gpio_part2 *gpio2 = + (struct exynos5_gpio_part2 *) samsung_get_base_gpio_part2(); + + switch (peripheral) { + case PERIPH_ID_SPI0: + bank = &gpio1->a2; + cfg = GPIO_FUNC(0x2); + pin = 0; + break; + case PERIPH_ID_SPI1: + bank = &gpio1->a2; + cfg = GPIO_FUNC(0x2); + pin = 4; + break; + case PERIPH_ID_SPI2: + bank = &gpio1->b1; + cfg = GPIO_FUNC(0x5); + pin = 1; + break; + case PERIPH_ID_SPI3: + bank = &gpio2->f1; + cfg = GPIO_FUNC(0x2); + pin = 0; + break; + case PERIPH_ID_SPI4: + for (i = 0; i < 2; i++) { + s5p_gpio_cfg_pin(&gpio2->f0, i + 2, GPIO_FUNC(0x4)); + s5p_gpio_cfg_pin(&gpio2->e0, i + 4, GPIO_FUNC(0x4)); + } + break; + } + if (peripheral != PERIPH_ID_SPI4) { + for (i = pin; i < pin + 4; i++) + s5p_gpio_cfg_pin(bank, i, cfg); + } +} + +static int exynos5_pinmux_config(int peripheral, int flags) +{ + switch (peripheral) { + case PERIPH_ID_UART0: + case PERIPH_ID_UART1: + case PERIPH_ID_UART2: + case PERIPH_ID_UART3: + exynos5_uart_config(peripheral); + break; + case PERIPH_ID_SDMMC0: + case PERIPH_ID_SDMMC1: + case PERIPH_ID_SDMMC2: + case PERIPH_ID_SDMMC3: + return exynos5_mmc_config(peripheral, flags); + case PERIPH_ID_SROMC: + exynos5_sromc_config(flags); + break; + case PERIPH_ID_I2C0: + case PERIPH_ID_I2C1: + case PERIPH_ID_I2C2: + case PERIPH_ID_I2C3: + case PERIPH_ID_I2C4: + case PERIPH_ID_I2C5: + case PERIPH_ID_I2C6: + case PERIPH_ID_I2C7: + exynos5_i2c_config(peripheral, flags); + break; + case PERIPH_ID_I2S1: + exynos5_i2s_config(peripheral); + break; + case PERIPH_ID_SPI0: + case PERIPH_ID_SPI1: + case PERIPH_ID_SPI2: + case PERIPH_ID_SPI3: + case PERIPH_ID_SPI4: + exynos5_spi_config(peripheral); + break; + default: + debug("%s: invalid peripheral %d", __func__, peripheral); + return -1; + } + + return 0; +} + +static void exynos4_i2c_config(int peripheral, int flags) +{ + struct exynos4_gpio_part1 *gpio1 = + (struct exynos4_gpio_part1 *) samsung_get_base_gpio_part1(); + + switch (peripheral) { + case PERIPH_ID_I2C0: + s5p_gpio_cfg_pin(&gpio1->d1, 0, GPIO_FUNC(0x2)); + s5p_gpio_cfg_pin(&gpio1->d1, 1, GPIO_FUNC(0x2)); + break; + case PERIPH_ID_I2C1: + s5p_gpio_cfg_pin(&gpio1->d1, 2, GPIO_FUNC(0x2)); + s5p_gpio_cfg_pin(&gpio1->d1, 3, GPIO_FUNC(0x2)); + break; + case PERIPH_ID_I2C2: + s5p_gpio_cfg_pin(&gpio1->a0, 6, GPIO_FUNC(0x3)); + s5p_gpio_cfg_pin(&gpio1->a0, 7, GPIO_FUNC(0x3)); + break; + case PERIPH_ID_I2C3: + s5p_gpio_cfg_pin(&gpio1->a1, 2, GPIO_FUNC(0x3)); + s5p_gpio_cfg_pin(&gpio1->a1, 3, GPIO_FUNC(0x3)); + break; + case PERIPH_ID_I2C4: + s5p_gpio_cfg_pin(&gpio1->b, 2, GPIO_FUNC(0x3)); + s5p_gpio_cfg_pin(&gpio1->b, 3, GPIO_FUNC(0x3)); + break; + case PERIPH_ID_I2C5: + s5p_gpio_cfg_pin(&gpio1->b, 6, GPIO_FUNC(0x3)); + s5p_gpio_cfg_pin(&gpio1->b, 7, GPIO_FUNC(0x3)); + break; + case PERIPH_ID_I2C6: + s5p_gpio_cfg_pin(&gpio1->c1, 3, GPIO_FUNC(0x4)); + s5p_gpio_cfg_pin(&gpio1->c1, 4, GPIO_FUNC(0x4)); + break; + case PERIPH_ID_I2C7: + s5p_gpio_cfg_pin(&gpio1->d0, 2, GPIO_FUNC(0x3)); + s5p_gpio_cfg_pin(&gpio1->d0, 3, GPIO_FUNC(0x3)); + break; + } +} + +static int exynos4_mmc_config(int peripheral, int flags) +{ + struct exynos4_gpio_part2 *gpio2 = + (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2(); + struct s5p_gpio_bank *bank, *bank_ext; + int i; + + switch (peripheral) { + case PERIPH_ID_SDMMC0: + bank = &gpio2->k0; + bank_ext = &gpio2->k1; + break; + case PERIPH_ID_SDMMC2: + bank = &gpio2->k2; + bank_ext = &gpio2->k3; + break; + default: + return -1; + } + for (i = 0; i < 7; i++) { + if (i == 2) + continue; + s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2)); + s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE); + s5p_gpio_set_drv(bank, i, GPIO_DRV_4X); + } + if (flags & PINMUX_FLAG_8BIT_MODE) { + for (i = 3; i < 7; i++) { + s5p_gpio_cfg_pin(bank_ext, i, GPIO_FUNC(0x3)); + s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_NONE); + s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X); + } + } + + return 0; +} + +static void exynos4_uart_config(int peripheral) +{ + struct exynos4_gpio_part1 *gpio1 = + (struct exynos4_gpio_part1 *)samsung_get_base_gpio_part1(); + struct s5p_gpio_bank *bank; + int i, start, count; + + switch (peripheral) { + case PERIPH_ID_UART0: + bank = &gpio1->a0; + start = 0; + count = 4; + break; + case PERIPH_ID_UART1: + bank = &gpio1->a0; + start = 4; + count = 4; + break; + case PERIPH_ID_UART2: + bank = &gpio1->a1; + start = 0; + count = 4; + break; + case PERIPH_ID_UART3: + bank = &gpio1->a1; + start = 4; + count = 2; + break; + } + for (i = start; i < start + count; i++) { + s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE); + s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2)); + } +} +static int exynos4_pinmux_config(int peripheral, int flags) +{ + switch (peripheral) { + case PERIPH_ID_UART0: + case PERIPH_ID_UART1: + case PERIPH_ID_UART2: + case PERIPH_ID_UART3: + exynos4_uart_config(peripheral); + break; + case PERIPH_ID_I2C0: + case PERIPH_ID_I2C1: + case PERIPH_ID_I2C2: + case PERIPH_ID_I2C3: + case PERIPH_ID_I2C4: + case PERIPH_ID_I2C5: + case PERIPH_ID_I2C6: + case PERIPH_ID_I2C7: + exynos4_i2c_config(peripheral, flags); + break; + case PERIPH_ID_SDMMC0: + case PERIPH_ID_SDMMC2: + return exynos4_mmc_config(peripheral, flags); + case PERIPH_ID_SDMMC1: + case PERIPH_ID_SDMMC3: + case PERIPH_ID_SDMMC4: + printf("SDMMC device %d not implemented\n", peripheral); + return -1; + default: + debug("%s: invalid peripheral %d", __func__, peripheral); + return -1; + } + + return 0; +} + +int exynos_pinmux_config(int peripheral, int flags) +{ + if (cpu_is_exynos5()) + return exynos5_pinmux_config(peripheral, flags); + else if (cpu_is_exynos4()) + return exynos4_pinmux_config(peripheral, flags); + else { + debug("pinmux functionality not supported\n"); + return -1; + } +} + +#ifdef CONFIG_OF_CONTROL +static int exynos5_pinmux_decode_periph_id(const void *blob, int node) +{ + int err; + u32 cell[3]; + + err = fdtdec_get_int_array(blob, node, "interrupts", cell, + ARRAY_SIZE(cell)); + if (err) + return PERIPH_ID_NONE; + + /* check for invalid peripheral id */ + if ((PERIPH_ID_SDMMC4 > cell[1]) || (cell[1] < PERIPH_ID_UART0)) + return cell[1]; + + debug(" invalid peripheral id\n"); + return PERIPH_ID_NONE; +} + +int pinmux_decode_periph_id(const void *blob, int node) +{ + if (cpu_is_exynos5()) + return exynos5_pinmux_decode_periph_id(blob, node); + else + return PERIPH_ID_NONE; +} +#endif diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c new file mode 100644 index 0000000..5d3bda2 --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/power.c @@ -0,0 +1,192 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * Donghwa Lee <dh09.lee@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/power.h> + +static void exynos4_mipi_phy_control(unsigned int dev_index, + unsigned int enable) +{ + struct exynos4_power *pmu = + (struct exynos4_power *)samsung_get_base_power(); + unsigned int addr, cfg = 0; + + if (dev_index == 0) + addr = (unsigned int)&pmu->mipi_phy0_control; + else + addr = (unsigned int)&pmu->mipi_phy1_control; + + + cfg = readl(addr); + if (enable) + cfg |= (EXYNOS_MIPI_PHY_MRESETN | EXYNOS_MIPI_PHY_ENABLE); + else + cfg &= ~(EXYNOS_MIPI_PHY_MRESETN | EXYNOS_MIPI_PHY_ENABLE); + + writel(cfg, addr); +} + +void set_mipi_phy_ctrl(unsigned int dev_index, unsigned int enable) +{ + if (cpu_is_exynos4()) + exynos4_mipi_phy_control(dev_index, enable); +} + +void exynos5_set_usbhost_phy_ctrl(unsigned int enable) +{ + struct exynos5_power *power = + (struct exynos5_power *)samsung_get_base_power(); + + if (enable) { + /* Enabling USBHOST_PHY */ + setbits_le32(&power->usbhost_phy_control, + POWER_USB_HOST_PHY_CTRL_EN); + } else { + /* Disabling USBHOST_PHY */ + clrbits_le32(&power->usbhost_phy_control, + POWER_USB_HOST_PHY_CTRL_EN); + } +} + +void set_usbhost_phy_ctrl(unsigned int enable) +{ + if (cpu_is_exynos5()) + exynos5_set_usbhost_phy_ctrl(enable); +} + +static void exynos5_dp_phy_control(unsigned int enable) +{ + unsigned int cfg; + struct exynos5_power *power = + (struct exynos5_power *)samsung_get_base_power(); + + cfg = readl(&power->dptx_phy_control); + if (enable) + cfg |= EXYNOS_DP_PHY_ENABLE; + else + cfg &= ~EXYNOS_DP_PHY_ENABLE; + + writel(cfg, &power->dptx_phy_control); +} + +void set_dp_phy_ctrl(unsigned int enable) +{ + if (cpu_is_exynos5()) + exynos5_dp_phy_control(enable); +} + +static void exynos5_set_ps_hold_ctrl(void) +{ + struct exynos5_power *power = + (struct exynos5_power *)samsung_get_base_power(); + + /* Set PS-Hold high */ + setbits_le32(&power->ps_hold_control, + EXYNOS_PS_HOLD_CONTROL_DATA_HIGH); +} + +void set_ps_hold_ctrl(void) +{ + if (cpu_is_exynos5()) + exynos5_set_ps_hold_ctrl(); +} + + +static void exynos5_set_xclkout(void) +{ + struct exynos5_power *power = + (struct exynos5_power *)samsung_get_base_power(); + + /* use xxti for xclk out */ + clrsetbits_le32(&power->pmu_debug, PMU_DEBUG_CLKOUT_SEL_MASK, + PMU_DEBUG_XXTI); +} + +void set_xclkout(void) +{ + if (cpu_is_exynos5()) + exynos5_set_xclkout(); +} + +/* Enables hardware tripping to power off the system when TMU fails */ +void set_hw_thermal_trip(void) +{ + if (cpu_is_exynos5()) { + struct exynos5_power *power = + (struct exynos5_power *)samsung_get_base_power(); + + /* PS_HOLD_CONTROL register ENABLE_HW_TRIP bit*/ + setbits_le32(&power->ps_hold_control, POWER_ENABLE_HW_TRIP); + } +} + +static uint32_t exynos5_get_reset_status(void) +{ + struct exynos5_power *power = + (struct exynos5_power *)samsung_get_base_power(); + + return power->inform1; +} + +static uint32_t exynos4_get_reset_status(void) +{ + struct exynos4_power *power = + (struct exynos4_power *)samsung_get_base_power(); + + return power->inform1; +} + +uint32_t get_reset_status(void) +{ + if (cpu_is_exynos5()) + return exynos5_get_reset_status(); + else + return exynos4_get_reset_status(); +} + +static void exynos5_power_exit_wakeup(void) +{ + struct exynos5_power *power = + (struct exynos5_power *)samsung_get_base_power(); + typedef void (*resume_func)(void); + + ((resume_func)power->inform0)(); +} + +static void exynos4_power_exit_wakeup(void) +{ + struct exynos4_power *power = + (struct exynos4_power *)samsung_get_base_power(); + typedef void (*resume_func)(void); + + ((resume_func)power->inform0)(); +} + +void power_exit_wakeup(void) +{ + if (cpu_is_exynos5()) + exynos5_power_exit_wakeup(); + else + exynos4_power_exit_wakeup(); +} diff --git a/arch/arm/cpu/armv7/exynos/soc.c b/arch/arm/cpu/armv7/exynos/soc.c new file mode 100644 index 0000000..e948e4c --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/soc.c @@ -0,0 +1,74 @@ +/* + * Copyright (c) 2010 Samsung Electronics. + * Minkyu Kang <mk7.kang@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/system.h> + +enum l2_cache_params { + CACHE_TAG_RAM_SETUP = (1 << 9), + CACHE_DATA_RAM_SETUP = (1 << 5), + CACHE_TAG_RAM_LATENCY = (2 << 6), + CACHE_DATA_RAM_LATENCY = (2 << 0) +}; + +void reset_cpu(ulong addr) +{ + writel(0x1, samsung_get_base_swreset()); +} + +#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{ + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +} +#endif + +#ifndef CONFIG_SYS_L2CACHE_OFF +/* + * Set L2 cache parameters + */ +static void exynos5_set_l2cache_params(void) +{ + unsigned int val = 0; + + asm volatile("mrc p15, 1, %0, c9, c0, 2\n" : "=r"(val)); + + val |= CACHE_TAG_RAM_SETUP | + CACHE_DATA_RAM_SETUP | + CACHE_TAG_RAM_LATENCY | + CACHE_DATA_RAM_LATENCY; + + asm volatile("mcr p15, 1, %0, c9, c0, 2\n" : : "r"(val)); +} + +/* + * Sets L2 cache related parameters before enabling data cache + */ +void v7_outer_cache_enable(void) +{ + if (cpu_is_exynos5()) + exynos5_set_l2cache_params(); +} +#endif diff --git a/arch/arm/cpu/armv7/exynos/spl_boot.c b/arch/arm/cpu/armv7/exynos/spl_boot.c new file mode 100644 index 0000000..6e8dd3b --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/spl_boot.c @@ -0,0 +1,203 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include<common.h> +#include<config.h> + +#include <asm/arch/clock.h> +#include <asm/arch/clk.h> +#include <asm/arch/dmc.h> +#include <asm/arch/power.h> +#include <asm/arch/spl.h> + +#include "common_setup.h" +#include "clock_init.h" + +DECLARE_GLOBAL_DATA_PTR; +#define OM_STAT (0x1f << 1) + +/* Index into irom ptr table */ +enum index { + MMC_INDEX, + EMMC44_INDEX, + EMMC44_END_INDEX, + SPI_INDEX, + USB_INDEX, +}; + +/* IROM Function Pointers Table */ +u32 irom_ptr_table[] = { + [MMC_INDEX] = 0x02020030, /* iROM Function Pointer-SDMMC boot */ + [EMMC44_INDEX] = 0x02020044, /* iROM Function Pointer-EMMC4.4 boot*/ + [EMMC44_END_INDEX] = 0x02020048,/* iROM Function Pointer + -EMMC4.4 end boot operation */ + [SPI_INDEX] = 0x02020058, /* iROM Function Pointer-SPI boot */ + [USB_INDEX] = 0x02020070, /* iROM Function Pointer-USB boot*/ + }; + +void *get_irom_func(int index) +{ + return (void *)*(u32 *)irom_ptr_table[index]; +} + +#ifdef CONFIG_USB_BOOTING +/* + * Set/clear program flow prediction and return the previous state. + */ +static int config_branch_prediction(int set_cr_z) +{ + unsigned int cr; + + /* System Control Register: 11th bit Z Branch prediction enable */ + cr = get_cr(); + set_cr(set_cr_z ? cr | CR_Z : cr & ~CR_Z); + + return cr & CR_Z; +} +#endif + +/* +* Copy U-boot from mmc to RAM: +* COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains +* Pointer to API (Data transfer from mmc to ram) +*/ +void copy_uboot_to_ram(void) +{ + enum boot_mode bootmode = BOOT_MODE_OM; + + u32 (*copy_bl2)(u32 offset, u32 nblock, u32 dst) = NULL; + u32 offset = 0, size = 0; +#ifdef CONFIG_SUPPORT_EMMC_BOOT + u32 (*copy_bl2_from_emmc)(u32 nblock, u32 dst); + void (*end_bootop_from_emmc)(void); +#endif +#ifdef CONFIG_USB_BOOTING + u32 (*usb_copy)(void); + int is_cr_z_set; + unsigned int sec_boot_check; + + /* Read iRAM location to check for secondary USB boot mode */ + sec_boot_check = readl(EXYNOS_IRAM_SECONDARY_BASE); + if (sec_boot_check == EXYNOS_USB_SECONDARY_BOOT) + bootmode = BOOT_MODE_USB; +#endif + + if (bootmode == BOOT_MODE_OM) + bootmode = readl(samsung_get_base_power()) & OM_STAT; + + switch (bootmode) { +#ifdef CONFIG_SPI_BOOTING + case BOOT_MODE_SERIAL: + offset = SPI_FLASH_UBOOT_POS; + size = CONFIG_BL2_SIZE; + copy_bl2 = get_irom_func(SPI_INDEX); + break; +#endif + case BOOT_MODE_MMC: + offset = BL2_START_OFFSET; + size = BL2_SIZE_BLOC_COUNT; + copy_bl2 = get_irom_func(MMC_INDEX); + break; +#ifdef CONFIG_SUPPORT_EMMC_BOOT + case BOOT_MODE_EMMC: + /* Set the FSYS1 clock divisor value for EMMC boot */ + emmc_boot_clk_div_set(); + + copy_bl2_from_emmc = get_irom_func(EMMC44_INDEX); + end_bootop_from_emmc = get_irom_func(EMMC44_END_INDEX); + + copy_bl2_from_emmc(BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE); + end_bootop_from_emmc(); + break; +#endif +#ifdef CONFIG_USB_BOOTING + case BOOT_MODE_USB: + /* + * iROM needs program flow prediction to be disabled + * before copy from USB device to RAM + */ + is_cr_z_set = config_branch_prediction(0); + usb_copy = get_irom_func(USB_INDEX); + usb_copy(); + config_branch_prediction(is_cr_z_set); + break; +#endif + default: + break; + } + + if (copy_bl2) + copy_bl2(offset, size, CONFIG_SYS_TEXT_BASE); +} + +void memzero(void *s, size_t n) +{ + char *ptr = s; + size_t i; + + for (i = 0; i < n; i++) + *ptr++ = '\0'; +} + +/** + * Set up the U-Boot global_data pointer + * + * This sets the address of the global data, and sets up basic values. + * + * @param gdp Value to give to gd + */ +static void setup_global_data(gd_t *gdp) +{ + gd = gdp; + memzero((void *)gd, sizeof(gd_t)); + gd->flags |= GD_FLG_RELOC; + gd->baudrate = CONFIG_BAUDRATE; + gd->have_console = 1; +} + +void board_init_f(unsigned long bootflag) +{ + __aligned(8) gd_t local_gd; + __attribute__((noreturn)) void (*uboot)(void); + + setup_global_data(&local_gd); + + if (do_lowlevel_init()) + power_exit_wakeup(); + + copy_uboot_to_ram(); + + /* Jump to U-Boot image */ + uboot = (void *)CONFIG_SYS_TEXT_BASE; + (*uboot)(); + /* Never returns Here */ +} + +/* Place Holders */ +void board_init_r(gd_t *id, ulong dest_addr) +{ + /* Function attribute is no-return */ + /* This Function never executes */ + while (1) + ; +} +void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) {} diff --git a/arch/arm/cpu/armv7/exynos/system.c b/arch/arm/cpu/armv7/exynos/system.c new file mode 100644 index 0000000..8424c57 --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/system.c @@ -0,0 +1,87 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * Donghwa Lee <dh09.lee@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/system.h> + +static void exynos5_set_usbhost_mode(unsigned int mode) +{ + struct exynos5_sysreg *sysreg = + (struct exynos5_sysreg *)samsung_get_base_sysreg(); + + /* Setting USB20PHY_CONFIG register to USB 2.0 HOST link */ + if (mode == USB20_PHY_CFG_HOST_LINK_EN) { + setbits_le32(&sysreg->usb20phy_cfg, + USB20_PHY_CFG_HOST_LINK_EN); + } else { + clrbits_le32(&sysreg->usb20phy_cfg, + USB20_PHY_CFG_HOST_LINK_EN); + } +} + +void set_usbhost_mode(unsigned int mode) +{ + if (cpu_is_exynos5()) + exynos5_set_usbhost_mode(mode); +} + +static void exynos4_set_system_display(void) +{ + struct exynos4_sysreg *sysreg = + (struct exynos4_sysreg *)samsung_get_base_sysreg(); + unsigned int cfg = 0; + + /* + * system register path set + * 0: MIE/MDNIE + * 1: FIMD Bypass + */ + cfg = readl(&sysreg->display_ctrl); + cfg |= (1 << 1); + writel(cfg, &sysreg->display_ctrl); +} + +static void exynos5_set_system_display(void) +{ + struct exynos5_sysreg *sysreg = + (struct exynos5_sysreg *)samsung_get_base_sysreg(); + unsigned int cfg = 0; + + /* + * system register path set + * 0: MIE/MDNIE + * 1: FIMD Bypass + */ + cfg = readl(&sysreg->disp1blk_cfg); + cfg |= (1 << 15); + writel(cfg, &sysreg->disp1blk_cfg); +} + +void set_system_display_ctrl(void) +{ + if (cpu_is_exynos4()) + exynos4_set_system_display(); + else + exynos5_set_system_display(); +} diff --git a/arch/arm/cpu/armv7/exynos/tzpc.c b/arch/arm/cpu/armv7/exynos/tzpc.c new file mode 100644 index 0000000..f5e8e9c --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/tzpc.c @@ -0,0 +1,57 @@ +/* + * Lowlevel setup for SMDK5250 board based on S5PC520 + * + * Copyright (C) 2012 Samsung Electronics + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/tzpc.h> +#include <asm/io.h> + +/* Setting TZPC[TrustZone Protection Controller] */ +void tzpc_init(void) +{ + struct exynos_tzpc *tzpc; + unsigned int addr, start = 0, end = 0; + + start = samsung_get_base_tzpc(); + + if (cpu_is_exynos5()) + end = start + ((EXYNOS5_NR_TZPC_BANKS - 1) * TZPC_BASE_OFFSET); + else if (cpu_is_exynos4()) + end = start + ((EXYNOS4_NR_TZPC_BANKS - 1) * TZPC_BASE_OFFSET); + + for (addr = start; addr <= end; addr += TZPC_BASE_OFFSET) { + tzpc = (struct exynos_tzpc *)addr; + + if (addr == start) + writel(R0SIZE, &tzpc->r0size); + + writel(DECPROTXSET, &tzpc->decprot0set); + writel(DECPROTXSET, &tzpc->decprot1set); + + if (cpu_is_exynos5() && (addr == end)) + break; + + writel(DECPROTXSET, &tzpc->decprot2set); + writel(DECPROTXSET, &tzpc->decprot3set); + } +} diff --git a/arch/arm/cpu/armv7/highbank/Makefile b/arch/arm/cpu/armv7/highbank/Makefile new file mode 100644 index 0000000..76faeb0 --- /dev/null +++ b/arch/arm/cpu/armv7/highbank/Makefile @@ -0,0 +1,46 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS := timer.o +SOBJS := + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/highbank/timer.c b/arch/arm/cpu/armv7/highbank/timer.c new file mode 100644 index 0000000..0f985e2 --- /dev/null +++ b/arch/arm/cpu/armv7/highbank/timer.c @@ -0,0 +1,128 @@ +/* + * Copyright 2010-2011 Calxeda, Inc. + * + * Based on arm926ejs/mx27/timer.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <common.h> +#include <div64.h> +#include <linux/types.h> /* for size_t */ +#include <linux/stddef.h> /* for NULL */ +#include <asm/io.h> +#include <asm/arch-armv7/systimer.h> + +#undef SYSTIMER_BASE +#define SYSTIMER_BASE 0xFFF34000 /* Timer 0 and 1 base */ +#define SYSTIMER_RATE 150000000 + +static ulong timestamp; +static ulong lastinc; +static struct systimer *systimer_base = (struct systimer *)SYSTIMER_BASE; + +/* + * Start the timer + */ +int timer_init(void) +{ + /* + * Setup timer0 + */ + writel(SYSTIMER_RELOAD, &systimer_base->timer0load); + writel(SYSTIMER_RELOAD, &systimer_base->timer0value); + writel(SYSTIMER_EN | SYSTIMER_32BIT, &systimer_base->timer0control); + + reset_timer_masked(); + + return 0; + +} + +#define TICK_PER_TIME ((SYSTIMER_RATE + CONFIG_SYS_HZ / 2) / CONFIG_SYS_HZ) +#define NS_PER_TICK (1000000000 / SYSTIMER_RATE) + +static inline unsigned long long tick_to_time(unsigned long long tick) +{ + do_div(tick, TICK_PER_TIME); + return tick; +} + +static inline unsigned long long time_to_tick(unsigned long long time) +{ + return time * TICK_PER_TIME; +} + +static inline unsigned long long us_to_tick(unsigned long long us) +{ + unsigned long long tick = us * 1000; + tick += NS_PER_TICK - 1; + do_div(tick, NS_PER_TICK); + return tick; +} + +unsigned long long get_ticks(void) +{ + ulong now = ~readl(&systimer_base->timer0value); + + if (now >= lastinc) /* normal mode (non roll) */ + /* move stamp forward with absolut diff ticks */ + timestamp += (now - lastinc); + else /* we have rollover of incrementer */ + timestamp += (0xFFFFFFFF - lastinc) + now; + lastinc = now; + return timestamp; +} + +/* + * Delay x useconds AND preserve advance timstamp value + * assumes timer is ticking at 1 msec + */ +void __udelay(ulong usec) +{ + unsigned long long tmp; + ulong tmo; + + tmo = us_to_tick(usec); + tmp = get_ticks() + tmo; /* get current timestamp */ + + while (get_ticks() < tmp) /* loop till event */ + /*NOP*/; +} + +ulong get_timer(ulong base) +{ + return get_timer_masked() - base; +} + +void reset_timer_masked(void) +{ + lastinc = ~readl(&systimer_base->timer0value); + timestamp = 0; +} + +void reset_timer(void) +{ + reset_timer_masked(); +} + +ulong get_timer_masked(void) +{ + return tick_to_time(get_ticks()); +} + +ulong get_tbclk(void) +{ + return CONFIG_SYS_HZ; +} diff --git a/arch/arm/cpu/armv7/lowlevel_init.S b/arch/arm/cpu/armv7/lowlevel_init.S new file mode 100644 index 0000000..0a15aa4 --- /dev/null +++ b/arch/arm/cpu/armv7/lowlevel_init.S @@ -0,0 +1,57 @@ +/* + * A lowlevel_init function that sets up the stack to call a C function to + * perform further init. + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Author : + * Aneesh V <aneesh@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm-offsets.h> +#include <config.h> +#include <linux/linkage.h> + +ENTRY(lowlevel_init) + /* + * Setup a temporary stack + */ + ldr sp, =CONFIG_SYS_INIT_SP_ADDR + bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ +#ifdef CONFIG_SPL_BUILD + ldr r8, =gdata +#else + sub sp, #GD_SIZE + bic sp, sp, #7 + mov r8, sp +#endif + /* + * Save the old lr(passed in ip) and the current lr to stack + */ + push {ip, lr} + + /* + * go setup pll, mux, memory + */ + bl s_init + pop {ip, pc} +ENDPROC(lowlevel_init) diff --git a/arch/arm/cpu/armv7/mx5/Makefile b/arch/arm/cpu/armv7/mx5/Makefile new file mode 100644 index 0000000..e05fae9 --- /dev/null +++ b/arch/arm/cpu/armv7/mx5/Makefile @@ -0,0 +1,48 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2009 Freescale Semiconductor, Inc. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS = soc.o clock.o +SOBJS = lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/mx5/asm-offsets.c b/arch/arm/cpu/armv7/mx5/asm-offsets.c new file mode 100644 index 0000000..f972498 --- /dev/null +++ b/arch/arm/cpu/armv7/mx5/asm-offsets.c @@ -0,0 +1,76 @@ +/* + * Adapted from Linux v2.6.36 kernel: arch/powerpc/kernel/asm-offsets.c + * + * This program is used to generate definitions needed by + * assembly language modules. + * + * We use the technique used in the OSF Mach kernel code: + * generate asm statements containing #defines, + * compile this file to assembler, and then extract the + * #defines from the assembly-language output. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <common.h> +#include <asm/arch/imx-regs.h> + +#include <linux/kbuild.h> + +int main(void) +{ + + /* Round up to make sure size gives nice stack alignment */ + DEFINE(CLKCTL_CCMR, offsetof(struct clkctl, ccr)); + DEFINE(CLKCTL_CCDR, offsetof(struct clkctl, ccdr)); + DEFINE(CLKCTL_CSR, offsetof(struct clkctl, csr)); + DEFINE(CLKCTL_CCSR, offsetof(struct clkctl, ccsr)); + DEFINE(CLKCTL_CACRR, offsetof(struct clkctl, cacrr)); + DEFINE(CLKCTL_CBCDR, offsetof(struct clkctl, cbcdr)); + DEFINE(CLKCTL_CBCMR, offsetof(struct clkctl, cbcmr)); + DEFINE(CLKCTL_CSCMR1, offsetof(struct clkctl, cscmr1)); + DEFINE(CLKCTL_CSCMR2, offsetof(struct clkctl, cscmr2)); + DEFINE(CLKCTL_CSCDR1, offsetof(struct clkctl, cscdr1)); + DEFINE(CLKCTL_CS1CDR, offsetof(struct clkctl, cs1cdr)); + DEFINE(CLKCTL_CS2CDR, offsetof(struct clkctl, cs2cdr)); + DEFINE(CLKCTL_CDCDR, offsetof(struct clkctl, cdcdr)); + DEFINE(CLKCTL_CHSCCDR, offsetof(struct clkctl, chsccdr)); + DEFINE(CLKCTL_CSCDR2, offsetof(struct clkctl, cscdr2)); + DEFINE(CLKCTL_CSCDR3, offsetof(struct clkctl, cscdr3)); + DEFINE(CLKCTL_CSCDR4, offsetof(struct clkctl, cscdr4)); + DEFINE(CLKCTL_CWDR, offsetof(struct clkctl, cwdr)); + DEFINE(CLKCTL_CDHIPR, offsetof(struct clkctl, cdhipr)); + DEFINE(CLKCTL_CDCR, offsetof(struct clkctl, cdcr)); + DEFINE(CLKCTL_CTOR, offsetof(struct clkctl, ctor)); + DEFINE(CLKCTL_CLPCR, offsetof(struct clkctl, clpcr)); + DEFINE(CLKCTL_CISR, offsetof(struct clkctl, cisr)); + DEFINE(CLKCTL_CIMR, offsetof(struct clkctl, cimr)); + DEFINE(CLKCTL_CCOSR, offsetof(struct clkctl, ccosr)); + DEFINE(CLKCTL_CGPR, offsetof(struct clkctl, cgpr)); + DEFINE(CLKCTL_CCGR0, offsetof(struct clkctl, ccgr0)); + DEFINE(CLKCTL_CCGR1, offsetof(struct clkctl, ccgr1)); + DEFINE(CLKCTL_CCGR2, offsetof(struct clkctl, ccgr2)); + DEFINE(CLKCTL_CCGR3, offsetof(struct clkctl, ccgr3)); + DEFINE(CLKCTL_CCGR4, offsetof(struct clkctl, ccgr4)); + DEFINE(CLKCTL_CCGR5, offsetof(struct clkctl, ccgr5)); + DEFINE(CLKCTL_CCGR6, offsetof(struct clkctl, ccgr6)); + DEFINE(CLKCTL_CMEOR, offsetof(struct clkctl, cmeor)); +#if defined(CONFIG_MX53) + DEFINE(CLKCTL_CCGR7, offsetof(struct clkctl, ccgr7)); +#endif + + /* DPLL */ + DEFINE(PLL_DP_CTL, offsetof(struct dpll, dp_ctl)); + DEFINE(PLL_DP_CONFIG, offsetof(struct dpll, dp_config)); + DEFINE(PLL_DP_OP, offsetof(struct dpll, dp_op)); + DEFINE(PLL_DP_MFD, offsetof(struct dpll, dp_mfd)); + DEFINE(PLL_DP_MFN, offsetof(struct dpll, dp_mfn)); + DEFINE(PLL_DP_HFS_OP, offsetof(struct dpll, dp_hfs_op)); + DEFINE(PLL_DP_HFS_MFD, offsetof(struct dpll, dp_hfs_mfd)); + DEFINE(PLL_DP_HFS_MFN, offsetof(struct dpll, dp_hfs_mfn)); + + return 0; +} diff --git a/arch/arm/cpu/armv7/mx5/clock.c b/arch/arm/cpu/armv7/mx5/clock.c new file mode 100644 index 0000000..431756e --- /dev/null +++ b/arch/arm/cpu/armv7/mx5/clock.c @@ -0,0 +1,953 @@ +/* + * (C) Copyright 2007 + * Sascha Hauer, Pengutronix + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/clock.h> +#include <div64.h> +#include <asm/arch/sys_proto.h> + +enum pll_clocks { + PLL1_CLOCK = 0, + PLL2_CLOCK, + PLL3_CLOCK, +#ifdef CONFIG_MX53 + PLL4_CLOCK, +#endif + PLL_CLOCKS, +}; + +struct mxc_pll_reg *mxc_plls[PLL_CLOCKS] = { + [PLL1_CLOCK] = (struct mxc_pll_reg *)PLL1_BASE_ADDR, + [PLL2_CLOCK] = (struct mxc_pll_reg *)PLL2_BASE_ADDR, + [PLL3_CLOCK] = (struct mxc_pll_reg *)PLL3_BASE_ADDR, +#ifdef CONFIG_MX53 + [PLL4_CLOCK] = (struct mxc_pll_reg *)PLL4_BASE_ADDR, +#endif +}; + +#define AHB_CLK_ROOT 133333333 +#define SZ_DEC_1M 1000000 +#define PLL_PD_MAX 16 /* Actual pd+1 */ +#define PLL_MFI_MAX 15 +#define PLL_MFI_MIN 5 +#define ARM_DIV_MAX 8 +#define IPG_DIV_MAX 4 +#define AHB_DIV_MAX 8 +#define EMI_DIV_MAX 8 +#define NFC_DIV_MAX 8 + +#define MX5_CBCMR 0x00015154 +#define MX5_CBCDR 0x02888945 + +struct fixed_pll_mfd { + u32 ref_clk_hz; + u32 mfd; +}; + +const struct fixed_pll_mfd fixed_mfd[] = { + {MXC_HCLK, 24 * 16}, +}; + +struct pll_param { + u32 pd; + u32 mfi; + u32 mfn; + u32 mfd; +}; + +#define PLL_FREQ_MAX(ref_clk) (4 * (ref_clk) * PLL_MFI_MAX) +#define PLL_FREQ_MIN(ref_clk) \ + ((2 * (ref_clk) * (PLL_MFI_MIN - 1)) / PLL_PD_MAX) +#define MAX_DDR_CLK 420000000 +#define NFC_CLK_MAX 34000000 + +struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE; + +void set_usboh3_clk(void) +{ + clrsetbits_le32(&mxc_ccm->cscmr1, + MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK, + MXC_CCM_CSCMR1_USBOH3_CLK_SEL(1)); + clrsetbits_le32(&mxc_ccm->cscdr1, + MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK | + MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK, + MXC_CCM_CSCDR1_USBOH3_CLK_PRED(4) | + MXC_CCM_CSCDR1_USBOH3_CLK_PODF(1)); +} + +void enable_usboh3_clk(unsigned char enable) +{ + unsigned int cg = enable ? MXC_CCM_CCGR_CG_ON : MXC_CCM_CCGR_CG_OFF; + + clrsetbits_le32(&mxc_ccm->CCGR2, + MXC_CCM_CCGR2_USBOH3_60M(MXC_CCM_CCGR_CG_MASK), + MXC_CCM_CCGR2_USBOH3_60M(cg)); +} + +#ifdef CONFIG_I2C_MXC +/* i2c_num can be from 0, to 1 for i.MX51 and 2 for i.MX53 */ +int enable_i2c_clk(unsigned char enable, unsigned i2c_num) +{ + u32 mask; + +#if defined(CONFIG_MX51) + if (i2c_num > 1) +#elif defined(CONFIG_MX53) + if (i2c_num > 2) +#endif + return -EINVAL; + mask = MXC_CCM_CCGR_CG_MASK << + (MXC_CCM_CCGR1_I2C1_OFFSET + (i2c_num << 1)); + if (enable) + setbits_le32(&mxc_ccm->CCGR1, mask); + else + clrbits_le32(&mxc_ccm->CCGR1, mask); + return 0; +} +#endif + +void set_usb_phy_clk(void) +{ + clrbits_le32(&mxc_ccm->cscmr1, MXC_CCM_CSCMR1_USB_PHY_CLK_SEL); +} + +#if defined(CONFIG_MX51) +void enable_usb_phy1_clk(unsigned char enable) +{ + unsigned int cg = enable ? MXC_CCM_CCGR_CG_ON : MXC_CCM_CCGR_CG_OFF; + + clrsetbits_le32(&mxc_ccm->CCGR2, + MXC_CCM_CCGR2_USB_PHY(MXC_CCM_CCGR_CG_MASK), + MXC_CCM_CCGR2_USB_PHY(cg)); +} + +void enable_usb_phy2_clk(unsigned char enable) +{ + /* i.MX51 has a single USB PHY clock, so do nothing here. */ +} +#elif defined(CONFIG_MX53) +void enable_usb_phy1_clk(unsigned char enable) +{ + unsigned int cg = enable ? MXC_CCM_CCGR_CG_ON : MXC_CCM_CCGR_CG_OFF; + + clrsetbits_le32(&mxc_ccm->CCGR4, + MXC_CCM_CCGR4_USB_PHY1(MXC_CCM_CCGR_CG_MASK), + MXC_CCM_CCGR4_USB_PHY1(cg)); +} + +void enable_usb_phy2_clk(unsigned char enable) +{ + unsigned int cg = enable ? MXC_CCM_CCGR_CG_ON : MXC_CCM_CCGR_CG_OFF; + + clrsetbits_le32(&mxc_ccm->CCGR4, + MXC_CCM_CCGR4_USB_PHY2(MXC_CCM_CCGR_CG_MASK), + MXC_CCM_CCGR4_USB_PHY2(cg)); +} +#endif + +/* + * Calculate the frequency of PLLn. + */ +static uint32_t decode_pll(struct mxc_pll_reg *pll, uint32_t infreq) +{ + uint32_t ctrl, op, mfd, mfn, mfi, pdf, ret; + uint64_t refclk, temp; + int32_t mfn_abs; + + ctrl = readl(&pll->ctrl); + + if (ctrl & MXC_DPLLC_CTL_HFSM) { + mfn = readl(&pll->hfs_mfn); + mfd = readl(&pll->hfs_mfd); + op = readl(&pll->hfs_op); + } else { + mfn = readl(&pll->mfn); + mfd = readl(&pll->mfd); + op = readl(&pll->op); + } + + mfd &= MXC_DPLLC_MFD_MFD_MASK; + mfn &= MXC_DPLLC_MFN_MFN_MASK; + pdf = op & MXC_DPLLC_OP_PDF_MASK; + mfi = MXC_DPLLC_OP_MFI_RD(op); + + /* 21.2.3 */ + if (mfi < 5) + mfi = 5; + + /* Sign extend */ + if (mfn >= 0x04000000) { + mfn |= 0xfc000000; + mfn_abs = -mfn; + } else + mfn_abs = mfn; + + refclk = infreq * 2; + if (ctrl & MXC_DPLLC_CTL_DPDCK0_2_EN) + refclk *= 2; + + do_div(refclk, pdf + 1); + temp = refclk * mfn_abs; + do_div(temp, mfd + 1); + ret = refclk * mfi; + + if ((int)mfn < 0) + ret -= temp; + else + ret += temp; + + return ret; +} + +#ifdef CONFIG_MX51 +/* + * This function returns the Frequency Pre-Multiplier clock. + */ +static u32 get_fpm(void) +{ + u32 mult; + u32 ccr = readl(&mxc_ccm->ccr); + + if (ccr & MXC_CCM_CCR_FPM_MULT) + mult = 1024; + else + mult = 512; + + return MXC_CLK32 * mult; +} +#endif + +/* + * This function returns the low power audio clock. + */ +static u32 get_lp_apm(void) +{ + u32 ret_val = 0; + u32 ccsr = readl(&mxc_ccm->ccsr); + + if (ccsr & MXC_CCM_CCSR_LP_APM) +#if defined(CONFIG_MX51) + ret_val = get_fpm(); +#elif defined(CONFIG_MX53) + ret_val = decode_pll(mxc_plls[PLL4_CLOCK], MXC_HCLK); +#endif + else + ret_val = MXC_HCLK; + + return ret_val; +} + +/* + * Get mcu main rate + */ +u32 get_mcu_main_clk(void) +{ + u32 reg, freq; + + reg = MXC_CCM_CACRR_ARM_PODF_RD(readl(&mxc_ccm->cacrr)); + freq = decode_pll(mxc_plls[PLL1_CLOCK], MXC_HCLK); + return freq / (reg + 1); +} + +/* + * Get the rate of peripheral's root clock. + */ +u32 get_periph_clk(void) +{ + u32 reg; + + reg = readl(&mxc_ccm->cbcdr); + if (!(reg & MXC_CCM_CBCDR_PERIPH_CLK_SEL)) + return decode_pll(mxc_plls[PLL2_CLOCK], MXC_HCLK); + reg = readl(&mxc_ccm->cbcmr); + switch (MXC_CCM_CBCMR_PERIPH_CLK_SEL_RD(reg)) { + case 0: + return decode_pll(mxc_plls[PLL1_CLOCK], MXC_HCLK); + case 1: + return decode_pll(mxc_plls[PLL3_CLOCK], MXC_HCLK); + case 2: + return get_lp_apm(); + default: + return 0; + } + /* NOTREACHED */ +} + +/* + * Get the rate of ipg clock. + */ +static u32 get_ipg_clk(void) +{ + uint32_t freq, reg, div; + + freq = get_ahb_clk(); + + reg = readl(&mxc_ccm->cbcdr); + div = MXC_CCM_CBCDR_IPG_PODF_RD(reg) + 1; + + return freq / div; +} + +/* + * Get the rate of ipg_per clock. + */ +static u32 get_ipg_per_clk(void) +{ + u32 freq, pred1, pred2, podf; + + if (readl(&mxc_ccm->cbcmr) & MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL) + return get_ipg_clk(); + + if (readl(&mxc_ccm->cbcmr) & MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL) + freq = get_lp_apm(); + else + freq = get_periph_clk(); + podf = readl(&mxc_ccm->cbcdr); + pred1 = MXC_CCM_CBCDR_PERCLK_PRED1_RD(podf); + pred2 = MXC_CCM_CBCDR_PERCLK_PRED2_RD(podf); + podf = MXC_CCM_CBCDR_PERCLK_PODF_RD(podf); + return freq / ((pred1 + 1) * (pred2 + 1) * (podf + 1)); +} + +/* Get the output clock rate of a standard PLL MUX for peripherals. */ +static u32 get_standard_pll_sel_clk(u32 clk_sel) +{ + u32 freq = 0; + + switch (clk_sel & 0x3) { + case 0: + freq = decode_pll(mxc_plls[PLL1_CLOCK], MXC_HCLK); + break; + case 1: + freq = decode_pll(mxc_plls[PLL2_CLOCK], MXC_HCLK); + break; + case 2: + freq = decode_pll(mxc_plls[PLL3_CLOCK], MXC_HCLK); + break; + case 3: + freq = get_lp_apm(); + break; + } + + return freq; +} + +/* + * Get the rate of uart clk. + */ +static u32 get_uart_clk(void) +{ + unsigned int clk_sel, freq, reg, pred, podf; + + reg = readl(&mxc_ccm->cscmr1); + clk_sel = MXC_CCM_CSCMR1_UART_CLK_SEL_RD(reg); + freq = get_standard_pll_sel_clk(clk_sel); + + reg = readl(&mxc_ccm->cscdr1); + pred = MXC_CCM_CSCDR1_UART_CLK_PRED_RD(reg); + podf = MXC_CCM_CSCDR1_UART_CLK_PODF_RD(reg); + freq /= (pred + 1) * (podf + 1); + + return freq; +} + +/* + * get cspi clock rate. + */ +static u32 imx_get_cspiclk(void) +{ + u32 ret_val = 0, pdf, pre_pdf, clk_sel, freq; + u32 cscmr1 = readl(&mxc_ccm->cscmr1); + u32 cscdr2 = readl(&mxc_ccm->cscdr2); + + pre_pdf = MXC_CCM_CSCDR2_CSPI_CLK_PRED_RD(cscdr2); + pdf = MXC_CCM_CSCDR2_CSPI_CLK_PODF_RD(cscdr2); + clk_sel = MXC_CCM_CSCMR1_CSPI_CLK_SEL_RD(cscmr1); + freq = get_standard_pll_sel_clk(clk_sel); + ret_val = freq / ((pre_pdf + 1) * (pdf + 1)); + return ret_val; +} + +/* + * get esdhc clock rate. + */ +static u32 get_esdhc_clk(u32 port) +{ + u32 clk_sel = 0, pred = 0, podf = 0, freq = 0; + u32 cscmr1 = readl(&mxc_ccm->cscmr1); + u32 cscdr1 = readl(&mxc_ccm->cscdr1); + + switch (port) { + case 0: + clk_sel = MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_RD(cscmr1); + pred = MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_RD(cscdr1); + podf = MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_RD(cscdr1); + break; + case 1: + clk_sel = MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_RD(cscmr1); + pred = MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_RD(cscdr1); + podf = MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_RD(cscdr1); + break; + case 2: + if (cscmr1 & MXC_CCM_CSCMR1_ESDHC3_CLK_SEL) + return get_esdhc_clk(1); + else + return get_esdhc_clk(0); + case 3: + if (cscmr1 & MXC_CCM_CSCMR1_ESDHC4_CLK_SEL) + return get_esdhc_clk(1); + else + return get_esdhc_clk(0); + default: + break; + } + + freq = get_standard_pll_sel_clk(clk_sel) / ((pred + 1) * (podf + 1)); + return freq; +} + +static u32 get_axi_a_clk(void) +{ + u32 cbcdr = readl(&mxc_ccm->cbcdr); + u32 pdf = MXC_CCM_CBCDR_AXI_A_PODF_RD(cbcdr); + + return get_periph_clk() / (pdf + 1); +} + +static u32 get_axi_b_clk(void) +{ + u32 cbcdr = readl(&mxc_ccm->cbcdr); + u32 pdf = MXC_CCM_CBCDR_AXI_B_PODF_RD(cbcdr); + + return get_periph_clk() / (pdf + 1); +} + +static u32 get_emi_slow_clk(void) +{ + u32 cbcdr = readl(&mxc_ccm->cbcdr); + u32 emi_clk_sel = cbcdr & MXC_CCM_CBCDR_EMI_CLK_SEL; + u32 pdf = MXC_CCM_CBCDR_EMI_PODF_RD(cbcdr); + + if (emi_clk_sel) + return get_ahb_clk() / (pdf + 1); + + return get_periph_clk() / (pdf + 1); +} + +static u32 get_ddr_clk(void) +{ + u32 ret_val = 0; + u32 cbcmr = readl(&mxc_ccm->cbcmr); + u32 ddr_clk_sel = MXC_CCM_CBCMR_DDR_CLK_SEL_RD(cbcmr); +#ifdef CONFIG_MX51 + u32 cbcdr = readl(&mxc_ccm->cbcdr); + if (cbcdr & MXC_CCM_CBCDR_DDR_HIFREQ_SEL) { + u32 ddr_clk_podf = MXC_CCM_CBCDR_DDR_PODF_RD(cbcdr); + + ret_val = decode_pll(mxc_plls[PLL1_CLOCK], MXC_HCLK); + ret_val /= ddr_clk_podf + 1; + + return ret_val; + } +#endif + switch (ddr_clk_sel) { + case 0: + ret_val = get_axi_a_clk(); + break; + case 1: + ret_val = get_axi_b_clk(); + break; + case 2: + ret_val = get_emi_slow_clk(); + break; + case 3: + ret_val = get_ahb_clk(); + break; + default: + break; + } + + return ret_val; +} + +/* + * The API of get mxc clocks. + */ +unsigned int mxc_get_clock(enum mxc_clock clk) +{ + switch (clk) { + case MXC_ARM_CLK: + return get_mcu_main_clk(); + case MXC_AHB_CLK: + return get_ahb_clk(); + case MXC_IPG_CLK: + return get_ipg_clk(); + case MXC_IPG_PERCLK: + case MXC_I2C_CLK: + return get_ipg_per_clk(); + case MXC_UART_CLK: + return get_uart_clk(); + case MXC_CSPI_CLK: + return imx_get_cspiclk(); + case MXC_ESDHC_CLK: + return get_esdhc_clk(0); + case MXC_ESDHC2_CLK: + return get_esdhc_clk(1); + case MXC_ESDHC3_CLK: + return get_esdhc_clk(2); + case MXC_ESDHC4_CLK: + return get_esdhc_clk(3); + case MXC_FEC_CLK: + return get_ipg_clk(); + case MXC_SATA_CLK: + return get_ahb_clk(); + case MXC_DDR_CLK: + return get_ddr_clk(); + default: + break; + } + return -EINVAL; +} + +u32 imx_get_uartclk(void) +{ + return get_uart_clk(); +} + +u32 imx_get_fecclk(void) +{ + return get_ipg_clk(); +} + +static int gcd(int m, int n) +{ + int t; + while (m > 0) { + if (n > m) { + t = m; + m = n; + n = t; + } /* swap */ + m -= n; + } + return n; +} + +/* + * This is to calculate various parameters based on reference clock and + * targeted clock based on the equation: + * t_clk = 2*ref_freq*(mfi + mfn/(mfd+1))/(pd+1) + * This calculation is based on a fixed MFD value for simplicity. + */ +static int calc_pll_params(u32 ref, u32 target, struct pll_param *pll) +{ + u64 pd, mfi = 1, mfn, mfd, t1; + u32 n_target = target; + u32 n_ref = ref, i; + + /* + * Make sure targeted freq is in the valid range. + * Otherwise the following calculation might be wrong!!! + */ + if (n_target < PLL_FREQ_MIN(ref) || + n_target > PLL_FREQ_MAX(ref)) { + printf("Targeted peripheral clock should be" + "within [%d - %d]\n", + PLL_FREQ_MIN(ref) / SZ_DEC_1M, + PLL_FREQ_MAX(ref) / SZ_DEC_1M); + return -EINVAL; + } + + for (i = 0; i < ARRAY_SIZE(fixed_mfd); i++) { + if (fixed_mfd[i].ref_clk_hz == ref) { + mfd = fixed_mfd[i].mfd; + break; + } + } + + if (i == ARRAY_SIZE(fixed_mfd)) + return -EINVAL; + + /* Use n_target and n_ref to avoid overflow */ + for (pd = 1; pd <= PLL_PD_MAX; pd++) { + t1 = n_target * pd; + do_div(t1, (4 * n_ref)); + mfi = t1; + if (mfi > PLL_MFI_MAX) + return -EINVAL; + else if (mfi < 5) + continue; + break; + } + /* + * Now got pd and mfi already + * + * mfn = (((n_target * pd) / 4 - n_ref * mfi) * mfd) / n_ref; + */ + t1 = n_target * pd; + do_div(t1, 4); + t1 -= n_ref * mfi; + t1 *= mfd; + do_div(t1, n_ref); + mfn = t1; + debug("ref=%d, target=%d, pd=%d," "mfi=%d,mfn=%d, mfd=%d\n", + ref, n_target, (u32)pd, (u32)mfi, (u32)mfn, (u32)mfd); + i = 1; + if (mfn != 0) + i = gcd(mfd, mfn); + pll->pd = (u32)pd; + pll->mfi = (u32)mfi; + do_div(mfn, i); + pll->mfn = (u32)mfn; + do_div(mfd, i); + pll->mfd = (u32)mfd; + + return 0; +} + +#define calc_div(tgt_clk, src_clk, limit) ({ \ + u32 v = 0; \ + if (((src_clk) % (tgt_clk)) <= 100) \ + v = (src_clk) / (tgt_clk); \ + else \ + v = ((src_clk) / (tgt_clk)) + 1;\ + if (v > limit) \ + v = limit; \ + (v - 1); \ + }) + +#define CHANGE_PLL_SETTINGS(pll, pd, fi, fn, fd) \ + { \ + writel(0x1232, &pll->ctrl); \ + writel(0x2, &pll->config); \ + writel((((pd) - 1) << 0) | ((fi) << 4), \ + &pll->op); \ + writel(fn, &(pll->mfn)); \ + writel((fd) - 1, &pll->mfd); \ + writel((((pd) - 1) << 0) | ((fi) << 4), \ + &pll->hfs_op); \ + writel(fn, &pll->hfs_mfn); \ + writel((fd) - 1, &pll->hfs_mfd); \ + writel(0x1232, &pll->ctrl); \ + while (!readl(&pll->ctrl) & 0x1) \ + ;\ + } + +static int config_pll_clk(enum pll_clocks index, struct pll_param *pll_param) +{ + u32 ccsr = readl(&mxc_ccm->ccsr); + struct mxc_pll_reg *pll = mxc_plls[index]; + + switch (index) { + case PLL1_CLOCK: + /* Switch ARM to PLL2 clock */ + writel(ccsr | MXC_CCM_CCSR_PLL1_SW_CLK_SEL, + &mxc_ccm->ccsr); + CHANGE_PLL_SETTINGS(pll, pll_param->pd, + pll_param->mfi, pll_param->mfn, + pll_param->mfd); + /* Switch back */ + writel(ccsr & ~MXC_CCM_CCSR_PLL1_SW_CLK_SEL, + &mxc_ccm->ccsr); + break; + case PLL2_CLOCK: + /* Switch to pll2 bypass clock */ + writel(ccsr | MXC_CCM_CCSR_PLL2_SW_CLK_SEL, + &mxc_ccm->ccsr); + CHANGE_PLL_SETTINGS(pll, pll_param->pd, + pll_param->mfi, pll_param->mfn, + pll_param->mfd); + /* Switch back */ + writel(ccsr & ~MXC_CCM_CCSR_PLL2_SW_CLK_SEL, + &mxc_ccm->ccsr); + break; + case PLL3_CLOCK: + /* Switch to pll3 bypass clock */ + writel(ccsr | MXC_CCM_CCSR_PLL3_SW_CLK_SEL, + &mxc_ccm->ccsr); + CHANGE_PLL_SETTINGS(pll, pll_param->pd, + pll_param->mfi, pll_param->mfn, + pll_param->mfd); + /* Switch back */ + writel(ccsr & ~MXC_CCM_CCSR_PLL3_SW_CLK_SEL, + &mxc_ccm->ccsr); + break; +#ifdef CONFIG_MX53 + case PLL4_CLOCK: + /* Switch to pll4 bypass clock */ + writel(ccsr | MXC_CCM_CCSR_PLL4_SW_CLK_SEL, + &mxc_ccm->ccsr); + CHANGE_PLL_SETTINGS(pll, pll_param->pd, + pll_param->mfi, pll_param->mfn, + pll_param->mfd); + /* Switch back */ + writel(ccsr & ~MXC_CCM_CCSR_PLL4_SW_CLK_SEL, + &mxc_ccm->ccsr); + break; +#endif + default: + return -EINVAL; + } + + return 0; +} + +/* Config CPU clock */ +static int config_core_clk(u32 ref, u32 freq) +{ + int ret = 0; + struct pll_param pll_param; + + memset(&pll_param, 0, sizeof(struct pll_param)); + + /* The case that periph uses PLL1 is not considered here */ + ret = calc_pll_params(ref, freq, &pll_param); + if (ret != 0) { + printf("Error:Can't find pll parameters: %d\n", ret); + return ret; + } + + return config_pll_clk(PLL1_CLOCK, &pll_param); +} + +static int config_nfc_clk(u32 nfc_clk) +{ + u32 parent_rate = get_emi_slow_clk(); + u32 div; + + if (nfc_clk == 0) + return -EINVAL; + div = parent_rate / nfc_clk; + if (div == 0) + div++; + if (parent_rate / div > NFC_CLK_MAX) + div++; + clrsetbits_le32(&mxc_ccm->cbcdr, + MXC_CCM_CBCDR_NFC_PODF_MASK, + MXC_CCM_CBCDR_NFC_PODF(div - 1)); + while (readl(&mxc_ccm->cdhipr) != 0) + ; + return 0; +} + +void enable_nfc_clk(unsigned char enable) +{ + unsigned int cg = enable ? MXC_CCM_CCGR_CG_ON : MXC_CCM_CCGR_CG_OFF; + + clrsetbits_le32(&mxc_ccm->CCGR5, + MXC_CCM_CCGR5_EMI_ENFC(MXC_CCM_CCGR_CG_MASK), + MXC_CCM_CCGR5_EMI_ENFC(cg)); +} + +/* Config main_bus_clock for periphs */ +static int config_periph_clk(u32 ref, u32 freq) +{ + int ret = 0; + struct pll_param pll_param; + + memset(&pll_param, 0, sizeof(struct pll_param)); + + if (readl(&mxc_ccm->cbcdr) & MXC_CCM_CBCDR_PERIPH_CLK_SEL) { + ret = calc_pll_params(ref, freq, &pll_param); + if (ret != 0) { + printf("Error:Can't find pll parameters: %d\n", + ret); + return ret; + } + switch (MXC_CCM_CBCMR_PERIPH_CLK_SEL_RD( + readl(&mxc_ccm->cbcmr))) { + case 0: + return config_pll_clk(PLL1_CLOCK, &pll_param); + break; + case 1: + return config_pll_clk(PLL3_CLOCK, &pll_param); + break; + default: + return -EINVAL; + } + } + + return 0; +} + +static int config_ddr_clk(u32 emi_clk) +{ + u32 clk_src; + s32 shift = 0, clk_sel, div = 1; + u32 cbcmr = readl(&mxc_ccm->cbcmr); + + if (emi_clk > MAX_DDR_CLK) { + printf("Warning:DDR clock should not exceed %d MHz\n", + MAX_DDR_CLK / SZ_DEC_1M); + emi_clk = MAX_DDR_CLK; + } + + clk_src = get_periph_clk(); + /* Find DDR clock input */ + clk_sel = MXC_CCM_CBCMR_DDR_CLK_SEL_RD(cbcmr); + switch (clk_sel) { + case 0: + shift = 16; + break; + case 1: + shift = 19; + break; + case 2: + shift = 22; + break; + case 3: + shift = 10; + break; + default: + return -EINVAL; + } + + if ((clk_src % emi_clk) < 10000000) + div = clk_src / emi_clk; + else + div = (clk_src / emi_clk) + 1; + if (div > 8) + div = 8; + + clrsetbits_le32(&mxc_ccm->cbcdr, 0x7 << shift, (div - 1) << shift); + while (readl(&mxc_ccm->cdhipr) != 0) + ; + writel(0x0, &mxc_ccm->ccdr); + + return 0; +} + +/* + * This function assumes the expected core clock has to be changed by + * modifying the PLL. This is NOT true always but for most of the times, + * it is. So it assumes the PLL output freq is the same as the expected + * core clock (presc=1) unless the core clock is less than PLL_FREQ_MIN. + * In the latter case, it will try to increase the presc value until + * (presc*core_clk) is greater than PLL_FREQ_MIN. It then makes call to + * calc_pll_params() and obtains the values of PD, MFI,MFN, MFD based + * on the targeted PLL and reference input clock to the PLL. Lastly, + * it sets the register based on these values along with the dividers. + * Note 1) There is no value checking for the passed-in divider values + * so the caller has to make sure those values are sensible. + * 2) Also adjust the NFC divider such that the NFC clock doesn't + * exceed NFC_CLK_MAX. + * 3) IPU HSP clock is independent of AHB clock. Even it can go up to + * 177MHz for higher voltage, this function fixes the max to 133MHz. + * 4) This function should not have allowed diag_printf() calls since + * the serial driver has been stoped. But leave then here to allow + * easy debugging by NOT calling the cyg_hal_plf_serial_stop(). + */ +int mxc_set_clock(u32 ref, u32 freq, enum mxc_clock clk) +{ + freq *= SZ_DEC_1M; + + switch (clk) { + case MXC_ARM_CLK: + if (config_core_clk(ref, freq)) + return -EINVAL; + break; + case MXC_PERIPH_CLK: + if (config_periph_clk(ref, freq)) + return -EINVAL; + break; + case MXC_DDR_CLK: + if (config_ddr_clk(freq)) + return -EINVAL; + break; + case MXC_NFC_CLK: + if (config_nfc_clk(freq)) + return -EINVAL; + break; + default: + printf("Warning:Unsupported or invalid clock type\n"); + } + + return 0; +} + +#ifdef CONFIG_MX53 +/* + * The clock for the external interface can be set to use internal clock + * if fuse bank 4, row 3, bit 2 is set. + * This is an undocumented feature and it was confirmed by Freescale's support: + * Fuses (but not pins) may be used to configure SATA clocks. + * Particularly the i.MX53 Fuse_Map contains the next information + * about configuring SATA clocks : SATA_ALT_REF_CLK[1:0] (offset 0x180C) + * '00' - 100MHz (External) + * '01' - 50MHz (External) + * '10' - 120MHz, internal (USB PHY) + * '11' - Reserved +*/ +void mxc_set_sata_internal_clock(void) +{ + u32 *tmp_base = + (u32 *)(IIM_BASE_ADDR + 0x180c); + + set_usb_phy_clk(); + + clrsetbits_le32(tmp_base, 0x6, 0x4); +} +#endif + +/* + * Dump some core clockes. + */ +int do_mx5_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + u32 freq; + + freq = decode_pll(mxc_plls[PLL1_CLOCK], MXC_HCLK); + printf("PLL1 %8d MHz\n", freq / 1000000); + freq = decode_pll(mxc_plls[PLL2_CLOCK], MXC_HCLK); + printf("PLL2 %8d MHz\n", freq / 1000000); + freq = decode_pll(mxc_plls[PLL3_CLOCK], MXC_HCLK); + printf("PLL3 %8d MHz\n", freq / 1000000); +#ifdef CONFIG_MX53 + freq = decode_pll(mxc_plls[PLL4_CLOCK], MXC_HCLK); + printf("PLL4 %8d MHz\n", freq / 1000000); +#endif + + printf("\n"); + printf("AHB %8d kHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000); + printf("IPG %8d kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000); + printf("IPG PERCLK %8d kHz\n", mxc_get_clock(MXC_IPG_PERCLK) / 1000); + printf("DDR %8d kHz\n", mxc_get_clock(MXC_DDR_CLK) / 1000); +#ifdef CONFIG_MXC_SPI + printf("CSPI %8d kHz\n", mxc_get_clock(MXC_CSPI_CLK) / 1000); +#endif + return 0; +} + +/***************************************************/ + +U_BOOT_CMD( + clocks, CONFIG_SYS_MAXARGS, 1, do_mx5_showclocks, + "display clocks", + "" +); diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S new file mode 100644 index 0000000..dfce0ca --- /dev/null +++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S @@ -0,0 +1,442 @@ +/* + * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/imx-regs.h> +#include <generated/asm-offsets.h> +#include <linux/linkage.h> + +.section ".text.init", "x" + +.macro init_arm_erratum + /* ARM erratum ID #468414 */ + mrc 15, 0, r1, c1, c0, 1 + orr r1, r1, #(1 << 5) /* enable L1NEON bit */ + mcr 15, 0, r1, c1, c0, 1 +.endm + +/* + * L2CC Cache setup/invalidation/disable + */ +.macro init_l2cc + /* explicitly disable L2 cache */ + mrc 15, 0, r0, c1, c0, 1 + bic r0, r0, #0x2 + mcr 15, 0, r0, c1, c0, 1 + + /* reconfigure L2 cache aux control reg */ + ldr r0, =0xC0 | /* tag RAM */ \ + 0x4 | /* data RAM */ \ + 1 << 24 | /* disable write allocate delay */ \ + 1 << 23 | /* disable write allocate combine */ \ + 1 << 22 /* disable write allocate */ + +#if defined(CONFIG_MX51) + ldr r3, [r4, #ROM_SI_REV] + cmp r3, #0x10 + + /* disable write combine for TO 2 and lower revs */ + orrls r0, r0, #1 << 25 +#endif + + mcr 15, 1, r0, c9, c0, 2 +.endm /* init_l2cc */ + +/* AIPS setup - Only setup MPROTx registers. + * The PACR default values are good.*/ +.macro init_aips + /* + * Set all MPROTx to be non-bufferable, trusted for R/W, + * not forced to user-mode. + */ + ldr r0, =AIPS1_BASE_ADDR + ldr r1, =0x77777777 + str r1, [r0, #0x0] + str r1, [r0, #0x4] + ldr r0, =AIPS2_BASE_ADDR + str r1, [r0, #0x0] + str r1, [r0, #0x4] + /* + * Clear the on and off peripheral modules Supervisor Protect bit + * for SDMA to access them. Did not change the AIPS control registers + * (offset 0x20) access type + */ +.endm /* init_aips */ + +/* M4IF setup */ +.macro init_m4if +#ifdef CONFIG_MX51 + /* VPU and IPU given higher priority (0x4) + * IPU accesses with ID=0x1 given highest priority (=0xA) + */ + ldr r0, =M4IF_BASE_ADDR + + ldr r1, =0x00000203 + str r1, [r0, #0x40] + + str r4, [r0, #0x44] + + ldr r1, =0x00120125 + str r1, [r0, #0x9C] + + ldr r1, =0x001901A3 + str r1, [r0, #0x48] + +#endif +.endm /* init_m4if */ + +.macro setup_pll pll, freq + ldr r0, =\pll + adr r2, W_DP_\freq + bl setup_pll_func +.endm + +#define W_DP_OP 0 +#define W_DP_MFD 4 +#define W_DP_MFN 8 + +setup_pll_func: + ldr r1, =0x00001232 + str r1, [r0, #PLL_DP_CTL] /* Set DPLL ON (set UPEN bit): BRMO=1 */ + mov r1, #0x2 + str r1, [r0, #PLL_DP_CONFIG] /* Enable auto-restart AREN bit */ + + ldr r1, [r2, #W_DP_OP] + str r1, [r0, #PLL_DP_OP] + str r1, [r0, #PLL_DP_HFS_OP] + + ldr r1, [r2, #W_DP_MFD] + str r1, [r0, #PLL_DP_MFD] + str r1, [r0, #PLL_DP_HFS_MFD] + + ldr r1, [r2, #W_DP_MFN] + str r1, [r0, #PLL_DP_MFN] + str r1, [r0, #PLL_DP_HFS_MFN] + + ldr r1, =0x00001232 + str r1, [r0, #PLL_DP_CTL] +1: ldr r1, [r0, #PLL_DP_CTL] + ands r1, r1, #0x1 + beq 1b + + /* r10 saved upper lr */ + mov pc, lr + +.macro setup_pll_errata pll, freq + ldr r2, =\pll + str r4, [r2, #PLL_DP_CONFIG] /* Disable auto-restart AREN bit */ + ldr r1, =0x00001236 + str r1, [r2, #PLL_DP_CTL] /* Restart PLL with PLM=1 */ +1: ldr r1, [r2, #PLL_DP_CTL] /* Wait for lock */ + ands r1, r1, #0x1 + beq 1b + + ldr r5, \freq + str r5, [r2, #PLL_DP_MFN] /* Modify MFN value */ + str r5, [r2, #PLL_DP_HFS_MFN] + + mov r1, #0x1 + str r1, [r2, #PLL_DP_CONFIG] /* Reload MFN value */ + +2: ldr r1, [r2, #PLL_DP_CONFIG] + tst r1, #1 + bne 2b + + ldr r1, =100 /* Wait at least 4 us */ +3: subs r1, r1, #1 + bge 3b + + mov r1, #0x2 + str r1, [r2, #PLL_DP_CONFIG] /* Enable auto-restart AREN bit */ +.endm + +.macro init_clock +#if defined (CONFIG_MX51) + ldr r0, =CCM_BASE_ADDR + + /* Gate of clocks to the peripherals first */ + ldr r1, =0x3FFFFFFF + str r1, [r0, #CLKCTL_CCGR0] + str r4, [r0, #CLKCTL_CCGR1] + str r4, [r0, #CLKCTL_CCGR2] + str r4, [r0, #CLKCTL_CCGR3] + + ldr r1, =0x00030000 + str r1, [r0, #CLKCTL_CCGR4] + ldr r1, =0x00FFF030 + str r1, [r0, #CLKCTL_CCGR5] + ldr r1, =0x00000300 + str r1, [r0, #CLKCTL_CCGR6] + + /* Disable IPU and HSC dividers */ + mov r1, #0x60000 + str r1, [r0, #CLKCTL_CCDR] + + /* Make sure to switch the DDR away from PLL 1 */ + ldr r1, =0x19239145 + str r1, [r0, #CLKCTL_CBCDR] + /* make sure divider effective */ +1: ldr r1, [r0, #CLKCTL_CDHIPR] + cmp r1, #0x0 + bne 1b + + /* Switch ARM to step clock */ + mov r1, #0x4 + str r1, [r0, #CLKCTL_CCSR] + +#if defined(CONFIG_MX51_PLL_ERRATA) + setup_pll PLL1_BASE_ADDR, 864 + setup_pll_errata PLL1_BASE_ADDR, W_DP_MFN_800_DIT +#else + setup_pll PLL1_BASE_ADDR, 800 +#endif + + setup_pll PLL3_BASE_ADDR, 665 + + /* Switch peripheral to PLL 3 */ + ldr r0, =CCM_BASE_ADDR + ldr r1, =0x000010C0 | CONFIG_SYS_DDR_CLKSEL + str r1, [r0, #CLKCTL_CBCMR] + ldr r1, =0x13239145 + str r1, [r0, #CLKCTL_CBCDR] + setup_pll PLL2_BASE_ADDR, 665 + + /* Switch peripheral to PLL2 */ + ldr r0, =CCM_BASE_ADDR + ldr r1, =0x19239145 + str r1, [r0, #CLKCTL_CBCDR] + ldr r1, =0x000020C0 | CONFIG_SYS_DDR_CLKSEL + str r1, [r0, #CLKCTL_CBCMR] + + setup_pll PLL3_BASE_ADDR, 216 + + /* Set the platform clock dividers */ + ldr r0, =ARM_BASE_ADDR + ldr r1, =0x00000725 + str r1, [r0, #0x14] + + ldr r0, =CCM_BASE_ADDR + + /* Run 3.0 at Full speed, for other TO's wait till we increase VDDGP */ + ldr r3, [r4, #ROM_SI_REV] + cmp r3, #0x10 + movls r1, #0x1 + movhi r1, #0 + + str r1, [r0, #CLKCTL_CACRR] + + /* Switch ARM back to PLL 1 */ + str r4, [r0, #CLKCTL_CCSR] + + /* setup the rest */ + /* Use lp_apm (24MHz) source for perclk */ + ldr r1, =0x000020C2 | CONFIG_SYS_DDR_CLKSEL + str r1, [r0, #CLKCTL_CBCMR] + /* ddr clock from PLL 1, all perclk dividers are 1 since using 24MHz */ + ldr r1, =CONFIG_SYS_CLKTL_CBCDR + str r1, [r0, #CLKCTL_CBCDR] + + /* Restore the default values in the Gate registers */ + ldr r1, =0xFFFFFFFF + str r1, [r0, #CLKCTL_CCGR0] + str r1, [r0, #CLKCTL_CCGR1] + str r1, [r0, #CLKCTL_CCGR2] + str r1, [r0, #CLKCTL_CCGR3] + str r1, [r0, #CLKCTL_CCGR4] + str r1, [r0, #CLKCTL_CCGR5] + str r1, [r0, #CLKCTL_CCGR6] + + /* Use PLL 2 for UART's, get 66.5MHz from it */ + ldr r1, =0xA5A2A020 + str r1, [r0, #CLKCTL_CSCMR1] + ldr r1, =0x00C30321 + str r1, [r0, #CLKCTL_CSCDR1] + /* make sure divider effective */ +1: ldr r1, [r0, #CLKCTL_CDHIPR] + cmp r1, #0x0 + bne 1b + + str r4, [r0, #CLKCTL_CCDR] + + /* for cko - for ARM div by 8 */ + mov r1, #0x000A0000 + add r1, r1, #0x00000F0 + str r1, [r0, #CLKCTL_CCOSR] +#else /* CONFIG_MX53 */ + ldr r0, =CCM_BASE_ADDR + + /* Gate of clocks to the peripherals first */ + ldr r1, =0x3FFFFFFF + str r1, [r0, #CLKCTL_CCGR0] + str r4, [r0, #CLKCTL_CCGR1] + str r4, [r0, #CLKCTL_CCGR2] + str r4, [r0, #CLKCTL_CCGR3] + str r4, [r0, #CLKCTL_CCGR7] + ldr r1, =0x00030000 + str r1, [r0, #CLKCTL_CCGR4] + ldr r1, =0x00FFF030 + str r1, [r0, #CLKCTL_CCGR5] + ldr r1, =0x0F00030F + str r1, [r0, #CLKCTL_CCGR6] + + /* Switch ARM to step clock */ + mov r1, #0x4 + str r1, [r0, #CLKCTL_CCSR] + + setup_pll PLL1_BASE_ADDR, 800 + + setup_pll PLL3_BASE_ADDR, 400 + + /* Switch peripheral to PLL3 */ + ldr r0, =CCM_BASE_ADDR + ldr r1, =0x00015154 + str r1, [r0, #CLKCTL_CBCMR] + ldr r1, =0x02898945 + str r1, [r0, #CLKCTL_CBCDR] + /* make sure change is effective */ +1: ldr r1, [r0, #CLKCTL_CDHIPR] + cmp r1, #0x0 + bne 1b + + setup_pll PLL2_BASE_ADDR, 400 + + /* Switch peripheral to PLL2 */ + ldr r0, =CCM_BASE_ADDR + ldr r1, =0x00888945 + str r1, [r0, #CLKCTL_CBCDR] + + ldr r1, =0x00016154 + str r1, [r0, #CLKCTL_CBCMR] + + /*change uart clk parent to pll2*/ + ldr r1, [r0, #CLKCTL_CSCMR1] + and r1, r1, #0xfcffffff + orr r1, r1, #0x01000000 + str r1, [r0, #CLKCTL_CSCMR1] + + /* make sure change is effective */ +1: ldr r1, [r0, #CLKCTL_CDHIPR] + cmp r1, #0x0 + bne 1b + + setup_pll PLL3_BASE_ADDR, 216 + + setup_pll PLL4_BASE_ADDR, 455 + + /* Set the platform clock dividers */ + ldr r0, =ARM_BASE_ADDR + ldr r1, =0x00000124 + str r1, [r0, #0x14] + + ldr r0, =CCM_BASE_ADDR + mov r1, #0 + str r1, [r0, #CLKCTL_CACRR] + + /* Switch ARM back to PLL 1. */ + mov r1, #0x0 + str r1, [r0, #CLKCTL_CCSR] + + /* make uart div=6 */ + ldr r1, [r0, #CLKCTL_CSCDR1] + and r1, r1, #0xffffffc0 + orr r1, r1, #0x0a + str r1, [r0, #CLKCTL_CSCDR1] + + /* Restore the default values in the Gate registers */ + ldr r1, =0xFFFFFFFF + str r1, [r0, #CLKCTL_CCGR0] + str r1, [r0, #CLKCTL_CCGR1] + str r1, [r0, #CLKCTL_CCGR2] + str r1, [r0, #CLKCTL_CCGR3] + str r1, [r0, #CLKCTL_CCGR4] + str r1, [r0, #CLKCTL_CCGR5] + str r1, [r0, #CLKCTL_CCGR6] + str r1, [r0, #CLKCTL_CCGR7] + + mov r1, #0x00000 + str r1, [r0, #CLKCTL_CCDR] + + /* for cko - for ARM div by 8 */ + mov r1, #0x000A0000 + add r1, r1, #0x00000F0 + str r1, [r0, #CLKCTL_CCOSR] + +#endif /* CONFIG_MX53 */ +.endm + +.macro setup_wdog + ldr r0, =WDOG1_BASE_ADDR + mov r1, #0x30 + strh r1, [r0] +.endm + +ENTRY(lowlevel_init) + mov r10, lr + mov r4, #0 /* Fix R4 to 0 */ + +#if defined(CONFIG_SYS_MAIN_PWR_ON) + ldr r0, =GPIO1_BASE_ADDR + ldr r1, [r0, #0x0] + orr r1, r1, #1 << 23 + str r1, [r0, #0x0] + ldr r1, [r0, #0x4] + orr r1, r1, #1 << 23 + str r1, [r0, #0x4] +#endif + + init_arm_erratum + + init_l2cc + + init_aips + + init_m4if + + init_clock + + mov pc, r10 +ENDPROC(lowlevel_init) + +/* Board level setting value */ +#if defined(CONFIG_MX51_PLL_ERRATA) +W_DP_864: .word DP_OP_864 + .word DP_MFD_864 + .word DP_MFN_864 +W_DP_MFN_800_DIT: .word DP_MFN_800_DIT +#else +W_DP_800: .word DP_OP_800 + .word DP_MFD_800 + .word DP_MFN_800 +#endif +#if defined(CONFIG_MX51) +W_DP_665: .word DP_OP_665 + .word DP_MFD_665 + .word DP_MFN_665 +#endif +W_DP_216: .word DP_OP_216 + .word DP_MFD_216 + .word DP_MFN_216 +W_DP_400: .word DP_OP_400 + .word DP_MFD_400 + .word DP_MFN_400 +W_DP_455: .word DP_OP_455 + .word DP_MFD_455 + .word DP_MFN_455 diff --git a/arch/arm/cpu/armv7/mx5/soc.c b/arch/arm/cpu/armv7/mx5/soc.c new file mode 100644 index 0000000..3d50a5d --- /dev/null +++ b/arch/arm/cpu/armv7/mx5/soc.c @@ -0,0 +1,163 @@ +/* + * (C) Copyright 2007 + * Sascha Hauer, Pengutronix + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> + +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/imx-common/boot_mode.h> + +#if !(defined(CONFIG_MX51) || defined(CONFIG_MX53)) +#error "CPU_TYPE not defined" +#endif + +u32 get_cpu_rev(void) +{ +#ifdef CONFIG_MX51 + int system_rev = 0x51000; +#else + int system_rev = 0x53000; +#endif + int reg = __raw_readl(ROM_SI_REV); + +#if defined(CONFIG_MX51) + switch (reg) { + case 0x02: + system_rev |= CHIP_REV_1_1; + break; + case 0x10: + if ((__raw_readl(GPIO1_BASE_ADDR + 0x0) & (0x1 << 22)) == 0) + system_rev |= CHIP_REV_2_5; + else + system_rev |= CHIP_REV_2_0; + break; + case 0x20: + system_rev |= CHIP_REV_3_0; + break; + default: + system_rev |= CHIP_REV_1_0; + break; + } +#else + if (reg < 0x20) + system_rev |= CHIP_REV_1_0; + else + system_rev |= reg; +#endif + return system_rev; +} + +#ifdef CONFIG_REVISION_TAG +u32 __weak get_board_rev(void) +{ + return get_cpu_rev(); +} +#endif + +#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{ + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +} +#endif + +#if defined(CONFIG_FEC_MXC) +void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) +{ + int i; + struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE; + struct fuse_bank *bank = &iim->bank[1]; + struct fuse_bank1_regs *fuse = + (struct fuse_bank1_regs *)bank->fuse_regs; + + for (i = 0; i < 6; i++) + mac[i] = readl(&fuse->mac_addr[i]) & 0xff; +} +#endif + +void set_chipselect_size(int const cs_size) +{ + unsigned int reg; + struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; + reg = readl(&iomuxc_regs->gpr1); + + switch (cs_size) { + case CS0_128: + reg &= ~0x7; /* CS0=128MB, CS1=0, CS2=0, CS3=0 */ + reg |= 0x5; + break; + case CS0_64M_CS1_64M: + reg &= ~0x3F; /* CS0=64MB, CS1=64MB, CS2=0, CS3=0 */ + reg |= 0x1B; + break; + case CS0_64M_CS1_32M_CS2_32M: + reg &= ~0x1FF; /* CS0=64MB, CS1=32MB, CS2=32MB, CS3=0 */ + reg |= 0x4B; + break; + case CS0_32M_CS1_32M_CS2_32M_CS3_32M: + reg &= ~0xFFF; /* CS0=32MB, CS1=32MB, CS2=32MB, CS3=32MB */ + reg |= 0x249; + break; + default: + printf("Unknown chip select size: %d\n", cs_size); + break; + } + + writel(reg, &iomuxc_regs->gpr1); +} + +#ifdef CONFIG_MX53 +void boot_mode_apply(unsigned cfg_val) +{ + writel(cfg_val, &((struct srtc_regs *)SRTC_BASE_ADDR)->lpgr); +} +/* + * cfg_val will be used for + * Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0] + * + * If bit 28 of LPGR is set upon watchdog reset, + * bits[25:0] of LPGR will move to SBMR. + */ +const struct boot_mode soc_boot_modes[] = { + {"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)}, + /* usb or serial download */ + {"usb", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x13)}, + {"sata", MAKE_CFGVAL(0x28, 0x00, 0x00, 0x12)}, + {"escpi1:0", MAKE_CFGVAL(0x38, 0x20, 0x00, 0x12)}, + {"escpi1:1", MAKE_CFGVAL(0x38, 0x20, 0x04, 0x12)}, + {"escpi1:2", MAKE_CFGVAL(0x38, 0x20, 0x08, 0x12)}, + {"escpi1:3", MAKE_CFGVAL(0x38, 0x20, 0x0c, 0x12)}, + /* 4 bit bus width */ + {"esdhc1", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x12)}, + {"esdhc2", MAKE_CFGVAL(0x40, 0x20, 0x08, 0x12)}, + {"esdhc3", MAKE_CFGVAL(0x40, 0x20, 0x10, 0x12)}, + {"esdhc4", MAKE_CFGVAL(0x40, 0x20, 0x18, 0x12)}, + {NULL, 0}, +}; +#endif diff --git a/arch/arm/cpu/armv7/mx6/Makefile b/arch/arm/cpu/armv7/mx6/Makefile new file mode 100644 index 0000000..4f9ca68 --- /dev/null +++ b/arch/arm/cpu/armv7/mx6/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2011 Freescale Semiconductor, Inc. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS = soc.o clock.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c new file mode 100644 index 0000000..3c0d908 --- /dev/null +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -0,0 +1,477 @@ +/* + * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> + +enum pll_clocks { + PLL_SYS, /* System PLL */ + PLL_BUS, /* System Bus PLL*/ + PLL_USBOTG, /* OTG USB PLL */ + PLL_ENET, /* ENET PLL */ +}; + +struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + +#ifdef CONFIG_MXC_OCOTP +void enable_ocotp_clk(unsigned char enable) +{ + u32 reg; + + reg = __raw_readl(&imx_ccm->CCGR2); + if (enable) + reg |= MXC_CCM_CCGR2_OCOTP_CTRL_MASK; + else + reg &= ~MXC_CCM_CCGR2_OCOTP_CTRL_MASK; + __raw_writel(reg, &imx_ccm->CCGR2); +} +#endif + +void enable_usboh3_clk(unsigned char enable) +{ + u32 reg; + + reg = __raw_readl(&imx_ccm->CCGR6); + if (enable) + reg |= MXC_CCM_CCGR6_USBOH3_MASK; + else + reg &= ~(MXC_CCM_CCGR6_USBOH3_MASK); + __raw_writel(reg, &imx_ccm->CCGR6); + +} + +#ifdef CONFIG_I2C_MXC +/* i2c_num can be from 0 - 2 */ +int enable_i2c_clk(unsigned char enable, unsigned i2c_num) +{ + u32 reg; + u32 mask; + + if (i2c_num > 2) + return -EINVAL; + + mask = MXC_CCM_CCGR_CG_MASK + << (MXC_CCM_CCGR2_I2C1_SERIAL_OFFSET + (i2c_num << 1)); + reg = __raw_readl(&imx_ccm->CCGR2); + if (enable) + reg |= mask; + else + reg &= ~mask; + __raw_writel(reg, &imx_ccm->CCGR2); + return 0; +} +#endif + +static u32 decode_pll(enum pll_clocks pll, u32 infreq) +{ + u32 div; + + switch (pll) { + case PLL_SYS: + div = __raw_readl(&imx_ccm->analog_pll_sys); + div &= BM_ANADIG_PLL_SYS_DIV_SELECT; + + return infreq * (div >> 1); + case PLL_BUS: + div = __raw_readl(&imx_ccm->analog_pll_528); + div &= BM_ANADIG_PLL_528_DIV_SELECT; + + return infreq * (20 + (div << 1)); + case PLL_USBOTG: + div = __raw_readl(&imx_ccm->analog_usb1_pll_480_ctrl); + div &= BM_ANADIG_USB1_PLL_480_CTRL_DIV_SELECT; + + return infreq * (20 + (div << 1)); + case PLL_ENET: + div = __raw_readl(&imx_ccm->analog_pll_enet); + div &= BM_ANADIG_PLL_ENET_DIV_SELECT; + + return (div == 3 ? 125000000 : 25000000 * (div << 1)); + default: + return 0; + } + /* NOTREACHED */ +} + +static u32 get_mcu_main_clk(void) +{ + u32 reg, freq; + + reg = __raw_readl(&imx_ccm->cacrr); + reg &= MXC_CCM_CACRR_ARM_PODF_MASK; + reg >>= MXC_CCM_CACRR_ARM_PODF_OFFSET; + freq = decode_pll(PLL_SYS, MXC_HCLK); + + return freq / (reg + 1); +} + +u32 get_periph_clk(void) +{ + u32 reg, freq = 0; + + reg = __raw_readl(&imx_ccm->cbcdr); + if (reg & MXC_CCM_CBCDR_PERIPH_CLK_SEL) { + reg = __raw_readl(&imx_ccm->cbcmr); + reg &= MXC_CCM_CBCMR_PERIPH_CLK2_SEL_MASK; + reg >>= MXC_CCM_CBCMR_PERIPH_CLK2_SEL_OFFSET; + + switch (reg) { + case 0: + freq = decode_pll(PLL_USBOTG, MXC_HCLK); + break; + case 1: + case 2: + freq = MXC_HCLK; + break; + default: + break; + } + } else { + reg = __raw_readl(&imx_ccm->cbcmr); + reg &= MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_MASK; + reg >>= MXC_CCM_CBCMR_PRE_PERIPH_CLK_SEL_OFFSET; + + switch (reg) { + case 0: + freq = decode_pll(PLL_BUS, MXC_HCLK); + break; + case 1: + freq = PLL2_PFD2_FREQ; + break; + case 2: + freq = PLL2_PFD0_FREQ; + break; + case 3: + freq = PLL2_PFD2_DIV_FREQ; + break; + default: + break; + } + } + + return freq; +} + +static u32 get_ipg_clk(void) +{ + u32 reg, ipg_podf; + + reg = __raw_readl(&imx_ccm->cbcdr); + reg &= MXC_CCM_CBCDR_IPG_PODF_MASK; + ipg_podf = reg >> MXC_CCM_CBCDR_IPG_PODF_OFFSET; + + return get_ahb_clk() / (ipg_podf + 1); +} + +static u32 get_ipg_per_clk(void) +{ + u32 reg, perclk_podf; + + reg = __raw_readl(&imx_ccm->cscmr1); + perclk_podf = reg & MXC_CCM_CSCMR1_PERCLK_PODF_MASK; + + return get_ipg_clk() / (perclk_podf + 1); +} + +static u32 get_uart_clk(void) +{ + u32 reg, uart_podf; + u32 freq = PLL3_80M; + reg = __raw_readl(&imx_ccm->cscdr1); +#ifdef CONFIG_MX6SL + if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL) + freq = MXC_HCLK; +#endif + reg &= MXC_CCM_CSCDR1_UART_CLK_PODF_MASK; + uart_podf = reg >> MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET; + + return freq / (uart_podf + 1); +} + +static u32 get_cspi_clk(void) +{ + u32 reg, cspi_podf; + + reg = __raw_readl(&imx_ccm->cscdr2); + reg &= MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK; + cspi_podf = reg >> MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET; + + return PLL3_60M / (cspi_podf + 1); +} + +static u32 get_axi_clk(void) +{ + u32 root_freq, axi_podf; + u32 cbcdr = __raw_readl(&imx_ccm->cbcdr); + + axi_podf = cbcdr & MXC_CCM_CBCDR_AXI_PODF_MASK; + axi_podf >>= MXC_CCM_CBCDR_AXI_PODF_OFFSET; + + if (cbcdr & MXC_CCM_CBCDR_AXI_SEL) { + if (cbcdr & MXC_CCM_CBCDR_AXI_ALT_SEL) + root_freq = PLL2_PFD2_FREQ; + else + root_freq = PLL3_PFD1_FREQ; + } else + root_freq = get_periph_clk(); + + return root_freq / (axi_podf + 1); +} + +static u32 get_emi_slow_clk(void) +{ + u32 emi_clk_sel, emi_slow_pof, cscmr1, root_freq = 0; + + cscmr1 = __raw_readl(&imx_ccm->cscmr1); + emi_clk_sel = cscmr1 & MXC_CCM_CSCMR1_ACLK_EMI_SLOW_MASK; + emi_clk_sel >>= MXC_CCM_CSCMR1_ACLK_EMI_SLOW_OFFSET; + emi_slow_pof = cscmr1 & MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_MASK; + emi_slow_pof >>= MXC_CCM_CSCMR1_ACLK_EMI_PODF_OFFSET; + + switch (emi_clk_sel) { + case 0: + root_freq = get_axi_clk(); + break; + case 1: + root_freq = decode_pll(PLL_USBOTG, MXC_HCLK); + break; + case 2: + root_freq = PLL2_PFD2_FREQ; + break; + case 3: + root_freq = PLL2_PFD0_FREQ; + break; + } + + return root_freq / (emi_slow_pof + 1); +} + +#ifdef CONFIG_MX6SL +static u32 get_mmdc_ch0_clk(void) +{ + u32 cbcmr = __raw_readl(&imx_ccm->cbcmr); + u32 cbcdr = __raw_readl(&imx_ccm->cbcdr); + u32 freq, podf; + + podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH1_PODF_MASK) \ + >> MXC_CCM_CBCDR_MMDC_CH1_PODF_OFFSET; + + switch ((cbcmr & MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_MASK) >> + MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_OFFSET) { + case 0: + freq = decode_pll(PLL_BUS, MXC_HCLK); + break; + case 1: + freq = PLL2_PFD2_FREQ; + break; + case 2: + freq = PLL2_PFD0_FREQ; + break; + case 3: + freq = PLL2_PFD2_DIV_FREQ; + } + + return freq / (podf + 1); + +} +#else +static u32 get_mmdc_ch0_clk(void) +{ + u32 cbcdr = __raw_readl(&imx_ccm->cbcdr); + u32 mmdc_ch0_podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH0_PODF_MASK) >> + MXC_CCM_CBCDR_MMDC_CH0_PODF_OFFSET; + + return get_periph_clk() / (mmdc_ch0_podf + 1); +} +#endif + +static u32 get_usdhc_clk(u32 port) +{ + u32 root_freq = 0, usdhc_podf = 0, clk_sel = 0; + u32 cscmr1 = __raw_readl(&imx_ccm->cscmr1); + u32 cscdr1 = __raw_readl(&imx_ccm->cscdr1); + + switch (port) { + case 0: + usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC1_PODF_MASK) >> + MXC_CCM_CSCDR1_USDHC1_PODF_OFFSET; + clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC1_CLK_SEL; + + break; + case 1: + usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC2_PODF_MASK) >> + MXC_CCM_CSCDR1_USDHC2_PODF_OFFSET; + clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC2_CLK_SEL; + + break; + case 2: + usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC3_PODF_MASK) >> + MXC_CCM_CSCDR1_USDHC3_PODF_OFFSET; + clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC3_CLK_SEL; + + break; + case 3: + usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC4_PODF_MASK) >> + MXC_CCM_CSCDR1_USDHC4_PODF_OFFSET; + clk_sel = cscmr1 & MXC_CCM_CSCMR1_USDHC4_CLK_SEL; + + break; + default: + break; + } + + if (clk_sel) + root_freq = PLL2_PFD0_FREQ; + else + root_freq = PLL2_PFD2_FREQ; + + return root_freq / (usdhc_podf + 1); +} + +u32 imx_get_uartclk(void) +{ + return get_uart_clk(); +} + +u32 imx_get_fecclk(void) +{ + return decode_pll(PLL_ENET, MXC_HCLK); +} + +int enable_sata_clock(void) +{ + u32 reg = 0; + s32 timeout = 100000; + struct mxc_ccm_reg *const imx_ccm + = (struct mxc_ccm_reg *) CCM_BASE_ADDR; + + /* Enable sata clock */ + reg = readl(&imx_ccm->CCGR5); /* CCGR5 */ + reg |= MXC_CCM_CCGR5_SATA_MASK; + writel(reg, &imx_ccm->CCGR5); + + /* Enable PLLs */ + reg = readl(&imx_ccm->analog_pll_enet); + reg &= ~BM_ANADIG_PLL_SYS_POWERDOWN; + writel(reg, &imx_ccm->analog_pll_enet); + reg |= BM_ANADIG_PLL_SYS_ENABLE; + while (timeout--) { + if (readl(&imx_ccm->analog_pll_enet) & BM_ANADIG_PLL_SYS_LOCK) + break; + } + if (timeout <= 0) + return -EIO; + reg &= ~BM_ANADIG_PLL_SYS_BYPASS; + writel(reg, &imx_ccm->analog_pll_enet); + reg |= BM_ANADIG_PLL_ENET_ENABLE_SATA; + writel(reg, &imx_ccm->analog_pll_enet); + + return 0 ; +} + +unsigned int mxc_get_clock(enum mxc_clock clk) +{ + switch (clk) { + case MXC_ARM_CLK: + return get_mcu_main_clk(); + case MXC_PER_CLK: + return get_periph_clk(); + case MXC_AHB_CLK: + return get_ahb_clk(); + case MXC_IPG_CLK: + return get_ipg_clk(); + case MXC_IPG_PERCLK: + case MXC_I2C_CLK: + return get_ipg_per_clk(); + case MXC_UART_CLK: + return get_uart_clk(); + case MXC_CSPI_CLK: + return get_cspi_clk(); + case MXC_AXI_CLK: + return get_axi_clk(); + case MXC_EMI_SLOW_CLK: + return get_emi_slow_clk(); + case MXC_DDR_CLK: + return get_mmdc_ch0_clk(); + case MXC_ESDHC_CLK: + return get_usdhc_clk(0); + case MXC_ESDHC2_CLK: + return get_usdhc_clk(1); + case MXC_ESDHC3_CLK: + return get_usdhc_clk(2); + case MXC_ESDHC4_CLK: + return get_usdhc_clk(3); + case MXC_SATA_CLK: + return get_ahb_clk(); + default: + break; + } + + return -1; +} + +/* + * Dump some core clockes. + */ +int do_mx6_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + u32 freq; + freq = decode_pll(PLL_SYS, MXC_HCLK); + printf("PLL_SYS %8d MHz\n", freq / 1000000); + freq = decode_pll(PLL_BUS, MXC_HCLK); + printf("PLL_BUS %8d MHz\n", freq / 1000000); + freq = decode_pll(PLL_USBOTG, MXC_HCLK); + printf("PLL_OTG %8d MHz\n", freq / 1000000); + freq = decode_pll(PLL_ENET, MXC_HCLK); + printf("PLL_NET %8d MHz\n", freq / 1000000); + + printf("\n"); + printf("IPG %8d kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000); + printf("UART %8d kHz\n", mxc_get_clock(MXC_UART_CLK) / 1000); +#ifdef CONFIG_MXC_SPI + printf("CSPI %8d kHz\n", mxc_get_clock(MXC_CSPI_CLK) / 1000); +#endif + printf("AHB %8d kHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000); + printf("AXI %8d kHz\n", mxc_get_clock(MXC_AXI_CLK) / 1000); + printf("DDR %8d kHz\n", mxc_get_clock(MXC_DDR_CLK) / 1000); + printf("USDHC1 %8d kHz\n", mxc_get_clock(MXC_ESDHC_CLK) / 1000); + printf("USDHC2 %8d kHz\n", mxc_get_clock(MXC_ESDHC2_CLK) / 1000); + printf("USDHC3 %8d kHz\n", mxc_get_clock(MXC_ESDHC3_CLK) / 1000); + printf("USDHC4 %8d kHz\n", mxc_get_clock(MXC_ESDHC4_CLK) / 1000); + printf("EMI SLOW %8d kHz\n", mxc_get_clock(MXC_EMI_SLOW_CLK) / 1000); + printf("IPG PERCLK %8d kHz\n", mxc_get_clock(MXC_IPG_PERCLK) / 1000); + + return 0; +} + +/***************************************************/ + +U_BOOT_CMD( + clocks, CONFIG_SYS_MAXARGS, 1, do_mx6_showclocks, + "display clocks", + "" +); diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c new file mode 100644 index 0000000..fc436fb --- /dev/null +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -0,0 +1,230 @@ +/* + * (C) Copyright 2007 + * Sascha Hauer, Pengutronix + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> +#include <asm/imx-common/boot_mode.h> +#include <asm/imx-common/dma.h> +#include <stdbool.h> + +struct scu_regs { + u32 ctrl; + u32 config; + u32 status; + u32 invalidate; + u32 fpga_rev; +}; + +u32 get_cpu_rev(void) +{ + struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; + u32 reg = readl(&anatop->digprog_sololite); + u32 type = ((reg >> 16) & 0xff); + + if (type != MXC_CPU_MX6SL) { + reg = readl(&anatop->digprog); + type = ((reg >> 16) & 0xff); + if (type == MXC_CPU_MX6DL) { + struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR; + u32 cfg = readl(&scu->config) & 3; + + if (!cfg) + type = MXC_CPU_MX6SOLO; + } + } + reg &= 0xff; /* mx6 silicon revision */ + return (type << 12) | (reg + 0x10); +} + +#ifdef CONFIG_REVISION_TAG +u32 __weak get_board_rev(void) +{ + u32 cpurev = get_cpu_rev(); + u32 type = ((cpurev >> 12) & 0xff); + if (type == MXC_CPU_MX6SOLO) + cpurev = (MXC_CPU_MX6DL) << 12 | (cpurev & 0xFFF); + + return cpurev; +} +#endif + +void init_aips(void) +{ + struct aipstz_regs *aips1, *aips2; + + aips1 = (struct aipstz_regs *)AIPS1_BASE_ADDR; + aips2 = (struct aipstz_regs *)AIPS2_BASE_ADDR; + + /* + * Set all MPROTx to be non-bufferable, trusted for R/W, + * not forced to user-mode. + */ + writel(0x77777777, &aips1->mprot0); + writel(0x77777777, &aips1->mprot1); + writel(0x77777777, &aips2->mprot0); + writel(0x77777777, &aips2->mprot1); + + /* + * Set all OPACRx to be non-bufferable, not require + * supervisor privilege level for access,allow for + * write access and untrusted master access. + */ + writel(0x00000000, &aips1->opacr0); + writel(0x00000000, &aips1->opacr1); + writel(0x00000000, &aips1->opacr2); + writel(0x00000000, &aips1->opacr3); + writel(0x00000000, &aips1->opacr4); + writel(0x00000000, &aips2->opacr0); + writel(0x00000000, &aips2->opacr1); + writel(0x00000000, &aips2->opacr2); + writel(0x00000000, &aips2->opacr3); + writel(0x00000000, &aips2->opacr4); +} + +/* + * Set the VDDSOC + * + * Mask out the REG_CORE[22:18] bits (REG2_TRIG) and set + * them to the specified millivolt level. + * Possible values are from 0.725V to 1.450V in steps of + * 0.025V (25mV). + */ +void set_vddsoc(u32 mv) +{ + struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; + u32 val, reg = readl(&anatop->reg_core); + + if (mv < 725) + val = 0x00; /* Power gated off */ + else if (mv > 1450) + val = 0x1F; /* Power FET switched full on. No regulation */ + else + val = (mv - 700) / 25; + + /* + * Mask out the REG_CORE[22:18] bits (REG2_TRIG) + * and set them to the calculated value (0.7V + val * 0.25V) + */ + reg = (reg & ~(0x1F << 18)) | (val << 18); + writel(reg, &anatop->reg_core); +} + +static void imx_set_wdog_powerdown(bool enable) +{ + struct wdog_regs *wdog1 = (struct wdog_regs *)WDOG1_BASE_ADDR; + struct wdog_regs *wdog2 = (struct wdog_regs *)WDOG2_BASE_ADDR; + + /* Write to the PDE (Power Down Enable) bit */ + writew(enable, &wdog1->wmcr); + writew(enable, &wdog2->wmcr); +} + +int arch_cpu_init(void) +{ + init_aips(); + + set_vddsoc(1200); /* Set VDDSOC to 1.2V */ + + imx_set_wdog_powerdown(false); /* Disable PDE bit of WMCR register */ + +#ifdef CONFIG_APBH_DMA + /* Start APBH DMA */ + mxs_dma_init(); +#endif + + return 0; +} + +#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{ + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +} +#endif + +#if defined(CONFIG_FEC_MXC) +void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) +{ + struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; + struct fuse_bank *bank = &ocotp->bank[4]; + struct fuse_bank4_regs *fuse = + (struct fuse_bank4_regs *)bank->fuse_regs; + + u32 value = readl(&fuse->mac_addr_high); + mac[0] = (value >> 8); + mac[1] = value ; + + value = readl(&fuse->mac_addr_low); + mac[2] = value >> 24 ; + mac[3] = value >> 16 ; + mac[4] = value >> 8 ; + mac[5] = value ; + +} +#endif + +void boot_mode_apply(unsigned cfg_val) +{ + unsigned reg; + struct src *psrc = (struct src *)SRC_BASE_ADDR; + writel(cfg_val, &psrc->gpr9); + reg = readl(&psrc->gpr10); + if (cfg_val) + reg |= 1 << 28; + else + reg &= ~(1 << 28); + writel(reg, &psrc->gpr10); +} +/* + * cfg_val will be used for + * Boot_cfg4[7:0]:Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0] + * After reset, if GPR10[28] is 1, ROM will copy GPR9[25:0] + * to SBMR1, which will determine the boot device. + */ +const struct boot_mode soc_boot_modes[] = { + {"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)}, + /* reserved value should start rom usb */ + {"usb", MAKE_CFGVAL(0x01, 0x00, 0x00, 0x00)}, + {"sata", MAKE_CFGVAL(0x20, 0x00, 0x00, 0x00)}, + {"escpi1:0", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x08)}, + {"escpi1:1", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x18)}, + {"escpi1:2", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x28)}, + {"escpi1:3", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x38)}, + /* 4 bit bus width */ + {"esdhc1", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)}, + {"esdhc2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)}, + {"esdhc3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)}, + {"esdhc4", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)}, + {NULL, 0}, +}; + +void s_init(void) +{ +} diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile new file mode 100644 index 0000000..c4b9809 --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/Makefile @@ -0,0 +1,66 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)libomap-common.o + +COBJS := reset.o +COBJS += timer.o +COBJS += utils.o + +ifneq ($(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),) +COBJS += hwinit-common.o +COBJS += clocks-common.o +COBJS += emif-common.o +COBJS += vc.o +COBJS += abb.o +endif + +ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),) +COBJS += boot-common.o +SOBJS += lowlevel_init.o +endif + +ifndef CONFIG_SPL_BUILD +ifneq ($(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),) +COBJS += mem-common.o +endif +endif + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/omap-common/abb.c b/arch/arm/cpu/armv7/omap-common/abb.c new file mode 100644 index 0000000..87d1fb8 --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/abb.c @@ -0,0 +1,137 @@ +/* + * + * Adaptive Body Bias programming sequence for OMAP family + * + * (C) Copyright 2013 + * Texas Instruments, <www.ti.com> + * + * Andrii Tseglytskyi <andrii.tseglytskyi@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/omap_common.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> + +__weak s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb) +{ + return -1; +} + +static void abb_setup_timings(u32 setup) +{ + u32 sys_rate, sr2_cnt, clk_cycles; + + /* + * SR2_WTCNT_VALUE is the settling time for the ABB ldo after a + * transition and must be programmed with the correct time at boot. + * The value programmed into the register is the number of SYS_CLK + * clock cycles that match a given wall time profiled for the ldo. + * This value depends on: + * settling time of ldo in micro-seconds (varies per OMAP family), + * of clock cycles per SYS_CLK period (varies per OMAP family), + * the SYS_CLK frequency in MHz (varies per board) + * The formula is: + * + * ldo settling time (in micro-seconds) + * SR2_WTCNT_VALUE = ------------------------------------------ + * (# system clock cycles) * (sys_clk period) + * + * Put another way: + * + * SR2_WTCNT_VALUE = settling time / (# SYS_CLK cycles / SYS_CLK rate)) + * + * To avoid dividing by zero multiply both "# clock cycles" and + * "settling time" by 10 such that the final result is the one we want. + */ + + /* calculate SR2_WTCNT_VALUE */ + sys_rate = DIV_ROUND(V_OSCK, 1000000); + clk_cycles = DIV_ROUND(OMAP_ABB_CLOCK_CYCLES * 10, sys_rate); + sr2_cnt = DIV_ROUND(OMAP_ABB_SETTLING_TIME * 10, clk_cycles); + + setbits_le32(setup, + sr2_cnt << (ffs(OMAP_ABB_SETUP_SR2_WTCNT_VALUE_MASK) - 1)); +} + +void abb_setup(u32 fuse, u32 ldovbb, u32 setup, u32 control, + u32 txdone, u32 txdone_mask, u32 opp) +{ + u32 abb_type_mask, opp_sel_mask; + + /* sanity check */ + if (!setup || !control || !txdone) + return; + + /* setup ABB only in case of Fast or Slow OPP */ + switch (opp) { + case OMAP_ABB_FAST_OPP: + abb_type_mask = OMAP_ABB_SETUP_ACTIVE_FBB_SEL_MASK; + opp_sel_mask = OMAP_ABB_CONTROL_FAST_OPP_SEL_MASK; + break; + case OMAP_ABB_SLOW_OPP: + abb_type_mask = OMAP_ABB_SETUP_ACTIVE_RBB_SEL_MASK; + opp_sel_mask = OMAP_ABB_CONTROL_SLOW_OPP_SEL_MASK; + break; + default: + return; + } + + /* + * For some OMAP silicons additional setup for LDOVBB register is + * required. This is determined by data retrieved from corresponding + * OPP EFUSE register. Data, which is retrieved from EFUSE - is + * ABB enable/disable flag and VSET value, which must be copied + * to LDOVBB register. If function call fails - return quietly, + * it means no ABB is required for such silicon. + * + * For silicons, which don't require LDOVBB setup "fuse" and + * "ldovbb" offsets are not defined. ABB will be initialized in + * the common way for them. + */ + if (fuse && ldovbb) { + if (abb_setup_ldovbb(fuse, ldovbb)) + return; + } + + /* clear ABB registers */ + writel(0, setup); + writel(0, control); + + /* configure timings, based on oscillator value */ + abb_setup_timings(setup); + + /* clear pending interrupts before setup */ + setbits_le32(txdone, txdone_mask); + + /* select ABB type */ + setbits_le32(setup, abb_type_mask | OMAP_ABB_SETUP_SR2EN_MASK); + + /* initiate ABB ldo change */ + setbits_le32(control, opp_sel_mask | OMAP_ABB_CONTROL_OPP_CHANGE_MASK); + + /* wait until transition complete */ + if (!wait_on_value(txdone_mask, txdone_mask, (void *)txdone, LDELAY)) + puts("Error: ABB txdone is not set\n"); + + /* clear ABB tranxdone */ + setbits_le32(txdone, txdone_mask); +} diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c new file mode 100644 index 0000000..76ae1b6 --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/boot-common.c @@ -0,0 +1,112 @@ +/* + * boot-common.c + * + * Common bootmode functions for omap based boards + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <spl.h> +#include <asm/omap_common.h> +#include <asm/arch/omap.h> +#include <asm/arch/mmc_host_def.h> +#include <asm/arch/sys_proto.h> + +DECLARE_GLOBAL_DATA_PTR; + +void save_omap_boot_params(void) +{ + u32 rom_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS); + u8 boot_device; + u32 dev_desc, dev_data; + + if ((rom_params < NON_SECURE_SRAM_START) || + (rom_params > NON_SECURE_SRAM_END)) + return; + + /* + * rom_params can be type casted to omap_boot_parameters and + * used. But it not correct to assume that romcode structure + * encoding would be same as u-boot. So use the defined offsets. + */ + gd->arch.omap_boot_params.omap_bootdevice = boot_device = + *((u8 *)(rom_params + BOOT_DEVICE_OFFSET)); + + gd->arch.omap_boot_params.ch_flags = + *((u8 *)(rom_params + CH_FLAGS_OFFSET)); + + if ((boot_device >= MMC_BOOT_DEVICES_START) && + (boot_device <= MMC_BOOT_DEVICES_END)) { +#if !defined(CONFIG_AM33XX) && !defined(CONFIG_TI81XX) + if ((omap_hw_init_context() == + OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)) { + gd->arch.omap_boot_params.omap_bootmode = + *((u8 *)(rom_params + BOOT_MODE_OFFSET)); + } else +#endif + { + dev_desc = *((u32 *)(rom_params + DEV_DESC_PTR_OFFSET)); + dev_data = *((u32 *)(dev_desc + DEV_DATA_PTR_OFFSET)); + gd->arch.omap_boot_params.omap_bootmode = + *((u32 *)(dev_data + BOOT_MODE_OFFSET)); + } + } +} + +#ifdef CONFIG_SPL_BUILD +u32 spl_boot_device(void) +{ + return (u32) (gd->arch.omap_boot_params.omap_bootdevice); +} + +u32 spl_boot_mode(void) +{ + return gd->arch.omap_boot_params.omap_bootmode; +} + +void spl_board_init(void) +{ +#ifdef CONFIG_SPL_NAND_SUPPORT + gpmc_init(); +#endif +#if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT) + arch_misc_init(); +#endif +} + +int board_mmc_init(bd_t *bis) +{ + switch (spl_boot_device()) { + case BOOT_DEVICE_MMC1: + omap_mmc_init(0, 0, 0, -1, -1); + break; + case BOOT_DEVICE_MMC2: + case BOOT_DEVICE_MMC2_2: + omap_mmc_init(1, 0, 0, -1, -1); + break; + } + return 0; +} + +void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) +{ + typedef void __noreturn (*image_entry_noargs_t)(u32 *); + image_entry_noargs_t image_entry = + (image_entry_noargs_t) spl_image->entry_point; + + debug("image entry point: 0x%X\n", spl_image->entry_point); + /* Pass the saved boot_params from rom code */ + image_entry((u32 *)&gd->arch.omap_boot_params); +} +#endif diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c new file mode 100644 index 0000000..ef23127 --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c @@ -0,0 +1,790 @@ +/* + * + * Clock initialization for OMAP4 + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Aneesh V <aneesh@ti.com> + * + * Based on previous work by: + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * Rajendra Nayak <rnayak@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <i2c.h> +#include <asm/omap_common.h> +#include <asm/gpio.h> +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> +#include <asm/utils.h> +#include <asm/omap_gpio.h> +#include <asm/emif.h> + +#ifndef CONFIG_SPL_BUILD +/* + * printing to console doesn't work unless + * this code is executed from SPL + */ +#define printf(fmt, args...) +#define puts(s) +#endif + +const u32 sys_clk_array[8] = { + 12000000, /* 12 MHz */ + 20000000, /* 20 MHz */ + 16800000, /* 16.8 MHz */ + 19200000, /* 19.2 MHz */ + 26000000, /* 26 MHz */ + 27000000, /* 27 MHz */ + 38400000, /* 38.4 MHz */ +}; + +static inline u32 __get_sys_clk_index(void) +{ + s8 ind; + /* + * For ES1 the ROM code calibration of sys clock is not reliable + * due to hw issue. So, use hard-coded value. If this value is not + * correct for any board over-ride this function in board file + * From ES2.0 onwards you will get this information from + * CM_SYS_CLKSEL + */ + if (omap_revision() == OMAP4430_ES1_0) + ind = OMAP_SYS_CLK_IND_38_4_MHZ; + else { + /* SYS_CLKSEL - 1 to match the dpll param array indices */ + ind = (readl((*prcm)->cm_sys_clksel) & + CM_SYS_CLKSEL_SYS_CLKSEL_MASK) - 1; + } + return ind; +} + +u32 get_sys_clk_index(void) + __attribute__ ((weak, alias("__get_sys_clk_index"))); + +u32 get_sys_clk_freq(void) +{ + u8 index = get_sys_clk_index(); + return sys_clk_array[index]; +} + +void setup_post_dividers(u32 const base, const struct dpll_params *params) +{ + struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; + + /* Setup post-dividers */ + if (params->m2 >= 0) + writel(params->m2, &dpll_regs->cm_div_m2_dpll); + if (params->m3 >= 0) + writel(params->m3, &dpll_regs->cm_div_m3_dpll); + if (params->m4_h11 >= 0) + writel(params->m4_h11, &dpll_regs->cm_div_m4_h11_dpll); + if (params->m5_h12 >= 0) + writel(params->m5_h12, &dpll_regs->cm_div_m5_h12_dpll); + if (params->m6_h13 >= 0) + writel(params->m6_h13, &dpll_regs->cm_div_m6_h13_dpll); + if (params->m7_h14 >= 0) + writel(params->m7_h14, &dpll_regs->cm_div_m7_h14_dpll); + if (params->h21 >= 0) + writel(params->h21, &dpll_regs->cm_div_h21_dpll); + if (params->h22 >= 0) + writel(params->h22, &dpll_regs->cm_div_h22_dpll); + if (params->h23 >= 0) + writel(params->h23, &dpll_regs->cm_div_h23_dpll); + if (params->h24 >= 0) + writel(params->h24, &dpll_regs->cm_div_h24_dpll); +} + +static inline void do_bypass_dpll(u32 const base) +{ + struct dpll_regs *dpll_regs = (struct dpll_regs *)base; + + clrsetbits_le32(&dpll_regs->cm_clkmode_dpll, + CM_CLKMODE_DPLL_DPLL_EN_MASK, + DPLL_EN_FAST_RELOCK_BYPASS << + CM_CLKMODE_DPLL_EN_SHIFT); +} + +static inline void wait_for_bypass(u32 const base) +{ + struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; + + if (!wait_on_value(ST_DPLL_CLK_MASK, 0, &dpll_regs->cm_idlest_dpll, + LDELAY)) { + printf("Bypassing DPLL failed %x\n", base); + } +} + +static inline void do_lock_dpll(u32 const base) +{ + struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; + + clrsetbits_le32(&dpll_regs->cm_clkmode_dpll, + CM_CLKMODE_DPLL_DPLL_EN_MASK, + DPLL_EN_LOCK << CM_CLKMODE_DPLL_EN_SHIFT); +} + +static inline void wait_for_lock(u32 const base) +{ + struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; + + if (!wait_on_value(ST_DPLL_CLK_MASK, ST_DPLL_CLK_MASK, + &dpll_regs->cm_idlest_dpll, LDELAY)) { + printf("DPLL locking failed for %x\n", base); + hang(); + } +} + +inline u32 check_for_lock(u32 const base) +{ + struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; + u32 lock = readl(&dpll_regs->cm_idlest_dpll) & ST_DPLL_CLK_MASK; + + return lock; +} + +const struct dpll_params *get_mpu_dpll_params(struct dplls const *dpll_data) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->mpu[sysclk_ind]; +} + +const struct dpll_params *get_core_dpll_params(struct dplls const *dpll_data) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->core[sysclk_ind]; +} + +const struct dpll_params *get_per_dpll_params(struct dplls const *dpll_data) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->per[sysclk_ind]; +} + +const struct dpll_params *get_iva_dpll_params(struct dplls const *dpll_data) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->iva[sysclk_ind]; +} + +const struct dpll_params *get_usb_dpll_params(struct dplls const *dpll_data) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->usb[sysclk_ind]; +} + +const struct dpll_params *get_abe_dpll_params(struct dplls const *dpll_data) +{ +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->abe[sysclk_ind]; +#else + return dpll_data->abe; +#endif +} + +static const struct dpll_params *get_ddr_dpll_params + (struct dplls const *dpll_data) +{ + u32 sysclk_ind = get_sys_clk_index(); + + if (!dpll_data->ddr) + return NULL; + return &dpll_data->ddr[sysclk_ind]; +} + +static void do_setup_dpll(u32 const base, const struct dpll_params *params, + u8 lock, char *dpll) +{ + u32 temp, M, N; + struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; + + if (!params) + return; + + temp = readl(&dpll_regs->cm_clksel_dpll); + + if (check_for_lock(base)) { + /* + * The Dpll has already been locked by rom code using CH. + * Check if M,N are matching with Ideal nominal opp values. + * If matches, skip the rest otherwise relock. + */ + M = (temp & CM_CLKSEL_DPLL_M_MASK) >> CM_CLKSEL_DPLL_M_SHIFT; + N = (temp & CM_CLKSEL_DPLL_N_MASK) >> CM_CLKSEL_DPLL_N_SHIFT; + if ((M != (params->m)) || (N != (params->n))) { + debug("\n %s Dpll locked, but not for ideal M = %d," + "N = %d values, current values are M = %d," + "N= %d" , dpll, params->m, params->n, + M, N); + } else { + /* Dpll locked with ideal values for nominal opps. */ + debug("\n %s Dpll already locked with ideal" + "nominal opp values", dpll); + goto setup_post_dividers; + } + } + + bypass_dpll(base); + + /* Set M & N */ + temp &= ~CM_CLKSEL_DPLL_M_MASK; + temp |= (params->m << CM_CLKSEL_DPLL_M_SHIFT) & CM_CLKSEL_DPLL_M_MASK; + + temp &= ~CM_CLKSEL_DPLL_N_MASK; + temp |= (params->n << CM_CLKSEL_DPLL_N_SHIFT) & CM_CLKSEL_DPLL_N_MASK; + + writel(temp, &dpll_regs->cm_clksel_dpll); + + /* Lock */ + if (lock) + do_lock_dpll(base); + +setup_post_dividers: + setup_post_dividers(base, params); + + /* Wait till the DPLL locks */ + if (lock) + wait_for_lock(base); +} + +u32 omap_ddr_clk(void) +{ + u32 ddr_clk, sys_clk_khz, omap_rev, divider; + const struct dpll_params *core_dpll_params; + + omap_rev = omap_revision(); + sys_clk_khz = get_sys_clk_freq() / 1000; + + core_dpll_params = get_core_dpll_params(*dplls_data); + + debug("sys_clk %d\n ", sys_clk_khz * 1000); + + /* Find Core DPLL locked frequency first */ + ddr_clk = sys_clk_khz * 2 * core_dpll_params->m / + (core_dpll_params->n + 1); + + if (omap_rev < OMAP5430_ES1_0) { + /* + * DDR frequency is PHY_ROOT_CLK/2 + * PHY_ROOT_CLK = Fdpll/2/M2 + */ + divider = 4; + } else { + /* + * DDR frequency is PHY_ROOT_CLK + * PHY_ROOT_CLK = Fdpll/2/M2 + */ + divider = 2; + } + + ddr_clk = ddr_clk / divider / core_dpll_params->m2; + ddr_clk *= 1000; /* convert to Hz */ + debug("ddr_clk %d\n ", ddr_clk); + + return ddr_clk; +} + +/* + * Lock MPU dpll + * + * Resulting MPU frequencies: + * 4430 ES1.0 : 600 MHz + * 4430 ES2.x : 792 MHz (OPP Turbo) + * 4460 : 920 MHz (OPP Turbo) - DCC disabled + */ +void configure_mpu_dpll(void) +{ + const struct dpll_params *params; + struct dpll_regs *mpu_dpll_regs; + u32 omap_rev; + omap_rev = omap_revision(); + + /* + * DCC and clock divider settings for 4460. + * DCC is required, if more than a certain frequency is required. + * For, 4460 > 1GHZ. + * 5430 > 1.4GHZ. + */ + if ((omap_rev >= OMAP4460_ES1_0) && (omap_rev < OMAP5430_ES1_0)) { + mpu_dpll_regs = + (struct dpll_regs *)((*prcm)->cm_clkmode_dpll_mpu); + bypass_dpll((*prcm)->cm_clkmode_dpll_mpu); + clrbits_le32((*prcm)->cm_mpu_mpu_clkctrl, + MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK); + setbits_le32((*prcm)->cm_mpu_mpu_clkctrl, + MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK); + clrbits_le32(&mpu_dpll_regs->cm_clksel_dpll, + CM_CLKSEL_DCC_EN_MASK); + } + + params = get_mpu_dpll_params(*dplls_data); + + do_setup_dpll((*prcm)->cm_clkmode_dpll_mpu, params, DPLL_LOCK, "mpu"); + debug("MPU DPLL locked\n"); +} + +#ifdef CONFIG_USB_EHCI_OMAP +static void setup_usb_dpll(void) +{ + const struct dpll_params *params; + u32 sys_clk_khz, sd_div, num, den; + + sys_clk_khz = get_sys_clk_freq() / 1000; + /* + * USB: + * USB dpll is J-type. Need to set DPLL_SD_DIV for jitter correction + * DPLL_SD_DIV = CEILING ([DPLL_MULT/(DPLL_DIV+1)]* CLKINP / 250) + * - where CLKINP is sys_clk in MHz + * Use CLKINP in KHz and adjust the denominator accordingly so + * that we have enough accuracy and at the same time no overflow + */ + params = get_usb_dpll_params(*dplls_data); + num = params->m * sys_clk_khz; + den = (params->n + 1) * 250 * 1000; + num += den - 1; + sd_div = num / den; + clrsetbits_le32((*prcm)->cm_clksel_dpll_usb, + CM_CLKSEL_DPLL_DPLL_SD_DIV_MASK, + sd_div << CM_CLKSEL_DPLL_DPLL_SD_DIV_SHIFT); + + /* Now setup the dpll with the regular function */ + do_setup_dpll((*prcm)->cm_clkmode_dpll_usb, params, DPLL_LOCK, "usb"); +} +#endif + +static void setup_dplls(void) +{ + u32 temp; + const struct dpll_params *params; + + debug("setup_dplls\n"); + + /* CORE dpll */ + params = get_core_dpll_params(*dplls_data); /* default - safest */ + /* + * Do not lock the core DPLL now. Just set it up. + * Core DPLL will be locked after setting up EMIF + * using the FREQ_UPDATE method(freq_update_core()) + */ + if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2) + do_setup_dpll((*prcm)->cm_clkmode_dpll_core, params, + DPLL_NO_LOCK, "core"); + else + do_setup_dpll((*prcm)->cm_clkmode_dpll_core, params, + DPLL_LOCK, "core"); + /* Set the ratios for CORE_CLK, L3_CLK, L4_CLK */ + temp = (CLKSEL_CORE_X2_DIV_1 << CLKSEL_CORE_SHIFT) | + (CLKSEL_L3_CORE_DIV_2 << CLKSEL_L3_SHIFT) | + (CLKSEL_L4_L3_DIV_2 << CLKSEL_L4_SHIFT); + writel(temp, (*prcm)->cm_clksel_core); + debug("Core DPLL configured\n"); + + /* lock PER dpll */ + params = get_per_dpll_params(*dplls_data); + do_setup_dpll((*prcm)->cm_clkmode_dpll_per, + params, DPLL_LOCK, "per"); + debug("PER DPLL locked\n"); + + /* MPU dpll */ + configure_mpu_dpll(); + +#ifdef CONFIG_USB_EHCI_OMAP + setup_usb_dpll(); +#endif + params = get_ddr_dpll_params(*dplls_data); + do_setup_dpll((*prcm)->cm_clkmode_dpll_ddrphy, + params, DPLL_LOCK, "ddr"); +} + +#ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL +static void setup_non_essential_dplls(void) +{ + u32 abe_ref_clk; + const struct dpll_params *params; + + /* IVA */ + clrsetbits_le32((*prcm)->cm_bypclk_dpll_iva, + CM_BYPCLK_DPLL_IVA_CLKSEL_MASK, DPLL_IVA_CLKSEL_CORE_X2_DIV_2); + + params = get_iva_dpll_params(*dplls_data); + do_setup_dpll((*prcm)->cm_clkmode_dpll_iva, params, DPLL_LOCK, "iva"); + + /* Configure ABE dpll */ + params = get_abe_dpll_params(*dplls_data); +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK; + + if (omap_revision() == DRA752_ES1_0) + /* Select the sys clk for dpll_abe */ + clrsetbits_le32((*prcm)->cm_abe_pll_sys_clksel, + CM_CLKSEL_ABE_PLL_SYS_CLKSEL_MASK, + CM_ABE_PLL_SYS_CLKSEL_SYSCLK2); +#else + abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK; + /* + * We need to enable some additional options to achieve + * 196.608MHz from 32768 Hz + */ + setbits_le32((*prcm)->cm_clkmode_dpll_abe, + CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK| + CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK| + CM_CLKMODE_DPLL_LPMODE_EN_MASK| + CM_CLKMODE_DPLL_REGM4XEN_MASK); + /* Spend 4 REFCLK cycles at each stage */ + clrsetbits_le32((*prcm)->cm_clkmode_dpll_abe, + CM_CLKMODE_DPLL_RAMP_RATE_MASK, + 1 << CM_CLKMODE_DPLL_RAMP_RATE_SHIFT); +#endif + + /* Select the right reference clk */ + clrsetbits_le32((*prcm)->cm_abe_pll_ref_clksel, + CM_ABE_PLL_REF_CLKSEL_CLKSEL_MASK, + abe_ref_clk << CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT); + /* Lock the dpll */ + do_setup_dpll((*prcm)->cm_clkmode_dpll_abe, params, DPLL_LOCK, "abe"); +} +#endif + +u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic) +{ + u32 offset_code; + + volt_offset -= pmic->base_offset; + + offset_code = (volt_offset + pmic->step - 1) / pmic->step; + + /* + * Offset codes 1-6 all give the base voltage in Palmas + * Offset code 0 switches OFF the SMPS + */ + return offset_code + pmic->start_code; +} + +void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic) +{ + u32 offset_code; + u32 offset = volt_mv; + int ret = 0; + + if (!volt_mv) + return; + + pmic->pmic_bus_init(); + /* See if we can first get the GPIO if needed */ + if (pmic->gpio_en) + ret = gpio_request(pmic->gpio, "PMIC_GPIO"); + + if (ret < 0) { + printf("%s: gpio %d request failed %d\n", __func__, + pmic->gpio, ret); + return; + } + + /* Pull the GPIO low to select SET0 register, while we program SET1 */ + if (pmic->gpio_en) + gpio_direction_output(pmic->gpio, 0); + + /* convert to uV for better accuracy in the calculations */ + offset *= 1000; + + offset_code = get_offset_code(offset, pmic); + + debug("do_scale_vcore: volt - %d offset_code - 0x%x\n", volt_mv, + offset_code); + + if (pmic->pmic_write(pmic->i2c_slave_addr, vcore_reg, offset_code)) + printf("Scaling voltage failed for 0x%x\n", vcore_reg); + + if (pmic->gpio_en) + gpio_direction_output(pmic->gpio, 1); +} + +static u32 optimize_vcore_voltage(struct volts const *v) +{ + u32 val; + if (!v->value) + return 0; + if (!v->efuse.reg) + return v->value; + + switch (v->efuse.reg_bits) { + case 16: + val = readw(v->efuse.reg); + break; + case 32: + val = readl(v->efuse.reg); + break; + default: + printf("Error: efuse 0x%08x bits=%d unknown\n", + v->efuse.reg, v->efuse.reg_bits); + return v->value; + } + + if (!val) { + printf("Error: efuse 0x%08x bits=%d val=0, using %d\n", + v->efuse.reg, v->efuse.reg_bits, v->value); + return v->value; + } + + debug("%s:efuse 0x%08x bits=%d Vnom=%d, using efuse value %d\n", + __func__, v->efuse.reg, v->efuse.reg_bits, v->value, val); + return val; +} + +/* + * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva + * We set the maximum voltages allowed here because Smart-Reflex is not + * enabled in bootloader. Voltage initialization in the kernel will set + * these to the nominal values after enabling Smart-Reflex + */ +void scale_vcores(struct vcores_data const *vcores) +{ + u32 val; + + val = optimize_vcore_voltage(&vcores->core); + do_scale_vcore(vcores->core.addr, val, vcores->core.pmic); + + val = optimize_vcore_voltage(&vcores->mpu); + do_scale_vcore(vcores->mpu.addr, val, vcores->mpu.pmic); + + /* Configure MPU ABB LDO after scale */ + abb_setup((*ctrl)->control_std_fuse_opp_vdd_mpu_2, + (*ctrl)->control_wkup_ldovbb_mpu_voltage_ctrl, + (*prcm)->prm_abbldo_mpu_setup, + (*prcm)->prm_abbldo_mpu_ctrl, + (*prcm)->prm_irqstatus_mpu_2, + OMAP_ABB_MPU_TXDONE_MASK, + OMAP_ABB_FAST_OPP); + + val = optimize_vcore_voltage(&vcores->mm); + do_scale_vcore(vcores->mm.addr, val, vcores->mm.pmic); + + val = optimize_vcore_voltage(&vcores->gpu); + do_scale_vcore(vcores->gpu.addr, val, vcores->gpu.pmic); + + val = optimize_vcore_voltage(&vcores->eve); + do_scale_vcore(vcores->eve.addr, val, vcores->eve.pmic); + + val = optimize_vcore_voltage(&vcores->iva); + do_scale_vcore(vcores->iva.addr, val, vcores->iva.pmic); + + if (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3) { + /* Configure LDO SRAM "magic" bits */ + writel(2, (*prcm)->prm_sldo_core_setup); + writel(2, (*prcm)->prm_sldo_mpu_setup); + writel(2, (*prcm)->prm_sldo_mm_setup); + } +} + +static inline void enable_clock_domain(u32 const clkctrl_reg, u32 enable_mode) +{ + clrsetbits_le32(clkctrl_reg, CD_CLKCTRL_CLKTRCTRL_MASK, + enable_mode << CD_CLKCTRL_CLKTRCTRL_SHIFT); + debug("Enable clock domain - %x\n", clkctrl_reg); +} + +static inline void wait_for_clk_enable(u32 clkctrl_addr) +{ + u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED; + u32 bound = LDELAY; + + while ((idlest == MODULE_CLKCTRL_IDLEST_DISABLED) || + (idlest == MODULE_CLKCTRL_IDLEST_TRANSITIONING)) { + + clkctrl = readl(clkctrl_addr); + idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >> + MODULE_CLKCTRL_IDLEST_SHIFT; + if (--bound == 0) { + printf("Clock enable failed for 0x%x idlest 0x%x\n", + clkctrl_addr, clkctrl); + return; + } + } +} + +static inline void enable_clock_module(u32 const clkctrl_addr, u32 enable_mode, + u32 wait_for_enable) +{ + clrsetbits_le32(clkctrl_addr, MODULE_CLKCTRL_MODULEMODE_MASK, + enable_mode << MODULE_CLKCTRL_MODULEMODE_SHIFT); + debug("Enable clock module - %x\n", clkctrl_addr); + if (wait_for_enable) + wait_for_clk_enable(clkctrl_addr); +} + +void freq_update_core(void) +{ + u32 freq_config1 = 0; + const struct dpll_params *core_dpll_params; + u32 omap_rev = omap_revision(); + + core_dpll_params = get_core_dpll_params(*dplls_data); + /* Put EMIF clock domain in sw wakeup mode */ + enable_clock_domain((*prcm)->cm_memif_clkstctrl, + CD_CLKCTRL_CLKTRCTRL_SW_WKUP); + wait_for_clk_enable((*prcm)->cm_memif_emif_1_clkctrl); + wait_for_clk_enable((*prcm)->cm_memif_emif_2_clkctrl); + + freq_config1 = SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK | + SHADOW_FREQ_CONFIG1_DLL_RESET_MASK; + + freq_config1 |= (DPLL_EN_LOCK << SHADOW_FREQ_CONFIG1_DPLL_EN_SHIFT) & + SHADOW_FREQ_CONFIG1_DPLL_EN_MASK; + + freq_config1 |= (core_dpll_params->m2 << + SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT) & + SHADOW_FREQ_CONFIG1_M2_DIV_MASK; + + writel(freq_config1, (*prcm)->cm_shadow_freq_config1); + if (!wait_on_value(SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK, 0, + (u32 *) (*prcm)->cm_shadow_freq_config1, LDELAY)) { + puts("FREQ UPDATE procedure failed!!"); + hang(); + } + + /* + * Putting EMIF in HW_AUTO is seen to be causing issues with + * EMIF clocks and the master DLL. Keep EMIF in SW_WKUP + * in OMAP5430 ES1.0 silicon + */ + if (omap_rev != OMAP5430_ES1_0) { + /* Put EMIF clock domain back in hw auto mode */ + enable_clock_domain((*prcm)->cm_memif_clkstctrl, + CD_CLKCTRL_CLKTRCTRL_HW_AUTO); + wait_for_clk_enable((*prcm)->cm_memif_emif_1_clkctrl); + wait_for_clk_enable((*prcm)->cm_memif_emif_2_clkctrl); + } +} + +void bypass_dpll(u32 const base) +{ + do_bypass_dpll(base); + wait_for_bypass(base); +} + +void lock_dpll(u32 const base) +{ + do_lock_dpll(base); + wait_for_lock(base); +} + +void setup_clocks_for_console(void) +{ + /* Do not add any spl_debug prints in this function */ + clrsetbits_le32((*prcm)->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, + CD_CLKCTRL_CLKTRCTRL_SW_WKUP << + CD_CLKCTRL_CLKTRCTRL_SHIFT); + + /* Enable all UARTs - console will be on one of them */ + clrsetbits_le32((*prcm)->cm_l4per_uart1_clkctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << + MODULE_CLKCTRL_MODULEMODE_SHIFT); + + clrsetbits_le32((*prcm)->cm_l4per_uart2_clkctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << + MODULE_CLKCTRL_MODULEMODE_SHIFT); + + clrsetbits_le32((*prcm)->cm_l4per_uart3_clkctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << + MODULE_CLKCTRL_MODULEMODE_SHIFT); + + clrsetbits_le32((*prcm)->cm_l4per_uart4_clkctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << + MODULE_CLKCTRL_MODULEMODE_SHIFT); + + clrsetbits_le32((*prcm)->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, + CD_CLKCTRL_CLKTRCTRL_HW_AUTO << + CD_CLKCTRL_CLKTRCTRL_SHIFT); +} + +void do_enable_clocks(u32 const *clk_domains, + u32 const *clk_modules_hw_auto, + u32 const *clk_modules_explicit_en, + u8 wait_for_enable) +{ + u32 i, max = 100; + + /* Put the clock domains in SW_WKUP mode */ + for (i = 0; (i < max) && clk_domains[i]; i++) { + enable_clock_domain(clk_domains[i], + CD_CLKCTRL_CLKTRCTRL_SW_WKUP); + } + + /* Clock modules that need to be put in HW_AUTO */ + for (i = 0; (i < max) && clk_modules_hw_auto[i]; i++) { + enable_clock_module(clk_modules_hw_auto[i], + MODULE_CLKCTRL_MODULEMODE_HW_AUTO, + wait_for_enable); + }; + + /* Clock modules that need to be put in SW_EXPLICIT_EN mode */ + for (i = 0; (i < max) && clk_modules_explicit_en[i]; i++) { + enable_clock_module(clk_modules_explicit_en[i], + MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN, + wait_for_enable); + }; + + /* Put the clock domains in HW_AUTO mode now */ + for (i = 0; (i < max) && clk_domains[i]; i++) { + enable_clock_domain(clk_domains[i], + CD_CLKCTRL_CLKTRCTRL_HW_AUTO); + } +} + +void prcm_init(void) +{ + switch (omap_hw_init_context()) { + case OMAP_INIT_CONTEXT_SPL: + case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR: + case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH: + enable_basic_clocks(); + timer_init(); + scale_vcores(*omap_vcores); + setup_dplls(); +#ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL + setup_non_essential_dplls(); + enable_non_essential_clocks(); +#endif + setup_warmreset_time(); + break; + default: + break; + } + + if (OMAP_INIT_CONTEXT_SPL != omap_hw_init_context()) + enable_basic_uboot_clocks(); +} + +void gpi2c_init(void) +{ + static int gpi2c = 1; + + if (gpi2c) { + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + gpi2c = 0; + } +} diff --git a/arch/arm/cpu/armv7/omap-common/config.mk b/arch/arm/cpu/armv7/omap-common/config.mk new file mode 100644 index 0000000..217fc14 --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# Make ARMv5 to allow more compilers to work, even though its v7a. +PLATFORM_CPPFLAGS += -march=armv5 diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c new file mode 100644 index 0000000..9ede3f5 --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/emif-common.c @@ -0,0 +1,1339 @@ +/* + * EMIF programming + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Aneesh V <aneesh@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/emif.h> +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> +#include <asm/omap_common.h> +#include <asm/utils.h> +#include <linux/compiler.h> + +static int emif1_enabled = -1, emif2_enabled = -1; + +void set_lpmode_selfrefresh(u32 base) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + u32 reg; + + reg = readl(&emif->emif_pwr_mgmt_ctrl); + reg &= ~EMIF_REG_LP_MODE_MASK; + reg |= LP_MODE_SELF_REFRESH << EMIF_REG_LP_MODE_SHIFT; + reg &= ~EMIF_REG_SR_TIM_MASK; + writel(reg, &emif->emif_pwr_mgmt_ctrl); + + /* dummy read for the new SR_TIM to be loaded */ + readl(&emif->emif_pwr_mgmt_ctrl); +} + +void force_emif_self_refresh() +{ + set_lpmode_selfrefresh(EMIF1_BASE); + set_lpmode_selfrefresh(EMIF2_BASE); +} + +inline u32 emif_num(u32 base) +{ + if (base == EMIF1_BASE) + return 1; + else if (base == EMIF2_BASE) + return 2; + else + return 0; +} + +/* + * Get SDRAM type connected to EMIF. + * Assuming similar SDRAM parts are connected to both EMIF's + * which is typically the case. So it is sufficient to get + * SDRAM type from EMIF1. + */ +u32 emif_sdram_type() +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE; + + return (readl(&emif->emif_sdram_config) & + EMIF_REG_SDRAM_TYPE_MASK) >> EMIF_REG_SDRAM_TYPE_SHIFT; +} + +static inline u32 get_mr(u32 base, u32 cs, u32 mr_addr) +{ + u32 mr; + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + mr_addr |= cs << EMIF_REG_CS_SHIFT; + writel(mr_addr, &emif->emif_lpddr2_mode_reg_cfg); + if (omap_revision() == OMAP4430_ES2_0) + mr = readl(&emif->emif_lpddr2_mode_reg_data_es2); + else + mr = readl(&emif->emif_lpddr2_mode_reg_data); + debug("get_mr: EMIF%d cs %d mr %08x val 0x%x\n", emif_num(base), + cs, mr_addr, mr); + if (((mr & 0x0000ff00) >> 8) == (mr & 0xff) && + ((mr & 0x00ff0000) >> 16) == (mr & 0xff) && + ((mr & 0xff000000) >> 24) == (mr & 0xff)) + return mr & 0xff; + else + return mr; +} + +static inline void set_mr(u32 base, u32 cs, u32 mr_addr, u32 mr_val) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + mr_addr |= cs << EMIF_REG_CS_SHIFT; + writel(mr_addr, &emif->emif_lpddr2_mode_reg_cfg); + writel(mr_val, &emif->emif_lpddr2_mode_reg_data); +} + +void emif_reset_phy(u32 base) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + u32 iodft; + + iodft = readl(&emif->emif_iodft_tlgc); + iodft |= EMIF_REG_RESET_PHY_MASK; + writel(iodft, &emif->emif_iodft_tlgc); +} + +static void do_lpddr2_init(u32 base, u32 cs) +{ + u32 mr_addr; + const struct lpddr2_mr_regs *mr_regs; + + get_lpddr2_mr_regs(&mr_regs); + /* Wait till device auto initialization is complete */ + while (get_mr(base, cs, LPDDR2_MR0) & LPDDR2_MR0_DAI_MASK) + ; + set_mr(base, cs, LPDDR2_MR10, mr_regs->mr10); + /* + * tZQINIT = 1 us + * Enough loops assuming a maximum of 2GHz + */ + + sdelay(2000); + + set_mr(base, cs, LPDDR2_MR1, mr_regs->mr1); + set_mr(base, cs, LPDDR2_MR16, mr_regs->mr16); + + /* + * Enable refresh along with writing MR2 + * Encoding of RL in MR2 is (RL - 2) + */ + mr_addr = LPDDR2_MR2 | EMIF_REG_REFRESH_EN_MASK; + set_mr(base, cs, mr_addr, mr_regs->mr2); + + if (mr_regs->mr3 > 0) + set_mr(base, cs, LPDDR2_MR3, mr_regs->mr3); +} + +static void lpddr2_init(u32 base, const struct emif_regs *regs) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + /* Not NVM */ + clrbits_le32(&emif->emif_lpddr2_nvm_config, EMIF_REG_CS1NVMEN_MASK); + + /* + * Keep REG_INITREF_DIS = 1 to prevent re-initialization of SDRAM + * when EMIF_SDRAM_CONFIG register is written + */ + setbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_MASK); + + /* + * Set the SDRAM_CONFIG and PHY_CTRL for the + * un-locked frequency & default RL + */ + writel(regs->sdram_config_init, &emif->emif_sdram_config); + writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1); + + do_ext_phy_settings(base, regs); + + do_lpddr2_init(base, CS0); + if (regs->sdram_config & EMIF_REG_EBANK_MASK) + do_lpddr2_init(base, CS1); + + writel(regs->sdram_config, &emif->emif_sdram_config); + writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1); + + /* Enable refresh now */ + clrbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_MASK); + + } + +__weak void do_ext_phy_settings(u32 base, const struct emif_regs *regs) +{ +} + +void emif_update_timings(u32 base, const struct emif_regs *regs) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl_shdw); + writel(regs->sdram_tim1, &emif->emif_sdram_tim_1_shdw); + writel(regs->sdram_tim2, &emif->emif_sdram_tim_2_shdw); + writel(regs->sdram_tim3, &emif->emif_sdram_tim_3_shdw); + if (omap_revision() == OMAP4430_ES1_0) { + /* ES1 bug EMIF should be in force idle during freq_update */ + writel(0, &emif->emif_pwr_mgmt_ctrl); + } else { + writel(EMIF_PWR_MGMT_CTRL, &emif->emif_pwr_mgmt_ctrl); + writel(EMIF_PWR_MGMT_CTRL_SHDW, &emif->emif_pwr_mgmt_ctrl_shdw); + } + writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl_shdw); + writel(regs->zq_config, &emif->emif_zq_config); + writel(regs->temp_alert_config, &emif->emif_temp_alert_config); + writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw); + + if ((omap_revision() >= OMAP5430_ES1_0) || + (omap_revision() == DRA752_ES1_0)) { + writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0, + &emif->emif_l3_config); + } else if (omap_revision() >= OMAP4460_ES1_0) { + writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0, + &emif->emif_l3_config); + } else { + writel(EMIF_L3_CONFIG_VAL_SYS_10_LL_0, + &emif->emif_l3_config); + } +} + +static void ddr3_leveling(u32 base, const struct emif_regs *regs) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + /* keep sdram in self-refresh */ + writel(((LP_MODE_SELF_REFRESH << EMIF_REG_LP_MODE_SHIFT) + & EMIF_REG_LP_MODE_MASK), &emif->emif_pwr_mgmt_ctrl); + __udelay(130); + + /* + * Set invert_clkout (if activated)--DDR_PHYCTRL_1 + * Invert clock adds an additional half cycle delay on the command + * interface. The additional half cycle, is usually meant to enable + * leveling in the situation that DQS is later than CK on the board.It + * also helps provide some additional margin for leveling. + */ + writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1); + writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw); + __udelay(130); + + writel(((LP_MODE_DISABLE << EMIF_REG_LP_MODE_SHIFT) + & EMIF_REG_LP_MODE_MASK), &emif->emif_pwr_mgmt_ctrl); + + /* Launch Full leveling */ + writel(DDR3_FULL_LVL, &emif->emif_rd_wr_lvl_ctl); + + /* Wait till full leveling is complete */ + readl(&emif->emif_rd_wr_lvl_ctl); + __udelay(130); + + /* Read data eye leveling no of samples */ + config_data_eye_leveling_samples(base); + + /* Launch 8 incremental WR_LVL- to compensate for PHY limitation */ + writel(0x2 << EMIF_REG_WRLVLINC_INT_SHIFT, &emif->emif_rd_wr_lvl_ctl); + __udelay(130); + + /* Launch Incremental leveling */ + writel(DDR3_INC_LVL, &emif->emif_rd_wr_lvl_ctl); + __udelay(130); +} + +static void ddr3_sw_leveling(u32 base, const struct emif_regs *regs) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1); + writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw); + config_data_eye_leveling_samples(base); + + writel(regs->emif_rd_wr_lvl_ctl, &emif->emif_rd_wr_lvl_ctl); + writel(regs->sdram_config, &emif->emif_sdram_config); +} + +static void ddr3_init(u32 base, const struct emif_regs *regs) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + /* + * Set SDRAM_CONFIG and PHY control registers to locked frequency + * and RL =7. As the default values of the Mode Registers are not + * defined, contents of mode Registers must be fully initialized. + * H/W takes care of this initialization + */ + writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config); + writel(regs->sdram_config_init, &emif->emif_sdram_config); + + writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1); + + /* Update timing registers */ + writel(regs->sdram_tim1, &emif->emif_sdram_tim_1); + writel(regs->sdram_tim2, &emif->emif_sdram_tim_2); + writel(regs->sdram_tim3, &emif->emif_sdram_tim_3); + + writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl); + writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl); + + do_ext_phy_settings(base, regs); + + /* enable leveling */ + writel(regs->emif_rd_wr_lvl_rmp_ctl, &emif->emif_rd_wr_lvl_rmp_ctl); + + if (omap_revision() == DRA752_ES1_0) + ddr3_sw_leveling(base, regs); + else + ddr3_leveling(base, regs); +} + +#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS +#define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg)) + +/* + * Organization and refresh requirements for LPDDR2 devices of different + * types and densities. Derived from JESD209-2 section 2.4 + */ +const struct lpddr2_addressing addressing_table[] = { + /* Banks tREFIx10 rowx32,rowx16 colx32,colx16 density */ + {BANKS4, T_REFI_15_6, {ROW_12, ROW_12}, {COL_7, COL_8} },/*64M */ + {BANKS4, T_REFI_15_6, {ROW_12, ROW_12}, {COL_8, COL_9} },/*128M */ + {BANKS4, T_REFI_7_8, {ROW_13, ROW_13}, {COL_8, COL_9} },/*256M */ + {BANKS4, T_REFI_7_8, {ROW_13, ROW_13}, {COL_9, COL_10} },/*512M */ + {BANKS8, T_REFI_7_8, {ROW_13, ROW_13}, {COL_9, COL_10} },/*1GS4 */ + {BANKS8, T_REFI_3_9, {ROW_14, ROW_14}, {COL_9, COL_10} },/*2GS4 */ + {BANKS8, T_REFI_3_9, {ROW_14, ROW_14}, {COL_10, COL_11} },/*4G */ + {BANKS8, T_REFI_3_9, {ROW_15, ROW_15}, {COL_10, COL_11} },/*8G */ + {BANKS4, T_REFI_7_8, {ROW_14, ROW_14}, {COL_9, COL_10} },/*1GS2 */ + {BANKS4, T_REFI_3_9, {ROW_15, ROW_15}, {COL_9, COL_10} },/*2GS2 */ +}; + +static const u32 lpddr2_density_2_size_in_mbytes[] = { + 8, /* 64Mb */ + 16, /* 128Mb */ + 32, /* 256Mb */ + 64, /* 512Mb */ + 128, /* 1Gb */ + 256, /* 2Gb */ + 512, /* 4Gb */ + 1024, /* 8Gb */ + 2048, /* 16Gb */ + 4096 /* 32Gb */ +}; + +/* + * Calculate the period of DDR clock from frequency value and set the + * denominator and numerator in global variables for easy access later + */ +static void set_ddr_clk_period(u32 freq) +{ + /* + * period = 1/freq + * period_in_ns = 10^9/freq + */ + *T_num = 1000000000; + *T_den = freq; + cancel_out(T_num, T_den, 200); + +} + +/* + * Convert time in nano seconds to number of cycles of DDR clock + */ +static inline u32 ns_2_cycles(u32 ns) +{ + return ((ns * (*T_den)) + (*T_num) - 1) / (*T_num); +} + +/* + * ns_2_cycles with the difference that the time passed is 2 times the actual + * value(to avoid fractions). The cycles returned is for the original value of + * the timing parameter + */ +static inline u32 ns_x2_2_cycles(u32 ns) +{ + return ((ns * (*T_den)) + (*T_num) * 2 - 1) / ((*T_num) * 2); +} + +/* + * Find addressing table index based on the device's type(S2 or S4) and + * density + */ +s8 addressing_table_index(u8 type, u8 density, u8 width) +{ + u8 index; + if ((density > LPDDR2_DENSITY_8Gb) || (width == LPDDR2_IO_WIDTH_8)) + return -1; + + /* + * Look at the way ADDR_TABLE_INDEX* values have been defined + * in emif.h compared to LPDDR2_DENSITY_* values + * The table is layed out in the increasing order of density + * (ignoring type). The exceptions 1GS2 and 2GS2 have been placed + * at the end + */ + if ((type == LPDDR2_TYPE_S2) && (density == LPDDR2_DENSITY_1Gb)) + index = ADDR_TABLE_INDEX1GS2; + else if ((type == LPDDR2_TYPE_S2) && (density == LPDDR2_DENSITY_2Gb)) + index = ADDR_TABLE_INDEX2GS2; + else + index = density; + + debug("emif: addressing table index %d\n", index); + + return index; +} + +/* + * Find the the right timing table from the array of timing + * tables of the device using DDR clock frequency + */ +static const struct lpddr2_ac_timings *get_timings_table(const struct + lpddr2_ac_timings const *const *device_timings, + u32 freq) +{ + u32 i, temp, freq_nearest; + const struct lpddr2_ac_timings *timings = 0; + + emif_assert(freq <= MAX_LPDDR2_FREQ); + emif_assert(device_timings); + + /* + * Start with the maximum allowed frequency - that is always safe + */ + freq_nearest = MAX_LPDDR2_FREQ; + /* + * Find the timings table that has the max frequency value: + * i. Above or equal to the DDR frequency - safe + * ii. The lowest that satisfies condition (i) - optimal + */ + for (i = 0; (i < MAX_NUM_SPEEDBINS) && device_timings[i]; i++) { + temp = device_timings[i]->max_freq; + if ((temp >= freq) && (temp <= freq_nearest)) { + freq_nearest = temp; + timings = device_timings[i]; + } + } + debug("emif: timings table: %d\n", freq_nearest); + return timings; +} + +/* + * Finds the value of emif_sdram_config_reg + * All parameters are programmed based on the device on CS0. + * If there is a device on CS1, it will be same as that on CS0 or + * it will be NVM. We don't support NVM yet. + * If cs1_device pointer is NULL it is assumed that there is no device + * on CS1 + */ +static u32 get_sdram_config_reg(const struct lpddr2_device_details *cs0_device, + const struct lpddr2_device_details *cs1_device, + const struct lpddr2_addressing *addressing, + u8 RL) +{ + u32 config_reg = 0; + + config_reg |= (cs0_device->type + 4) << EMIF_REG_SDRAM_TYPE_SHIFT; + config_reg |= EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING << + EMIF_REG_IBANK_POS_SHIFT; + + config_reg |= cs0_device->io_width << EMIF_REG_NARROW_MODE_SHIFT; + + config_reg |= RL << EMIF_REG_CL_SHIFT; + + config_reg |= addressing->row_sz[cs0_device->io_width] << + EMIF_REG_ROWSIZE_SHIFT; + + config_reg |= addressing->num_banks << EMIF_REG_IBANK_SHIFT; + + config_reg |= (cs1_device ? EBANK_CS1_EN : EBANK_CS1_DIS) << + EMIF_REG_EBANK_SHIFT; + + config_reg |= addressing->col_sz[cs0_device->io_width] << + EMIF_REG_PAGESIZE_SHIFT; + + return config_reg; +} + +static u32 get_sdram_ref_ctrl(u32 freq, + const struct lpddr2_addressing *addressing) +{ + u32 ref_ctrl = 0, val = 0, freq_khz; + freq_khz = freq / 1000; + /* + * refresh rate to be set is 'tREFI * freq in MHz + * division by 10000 to account for khz and x10 in t_REFI_us_x10 + */ + val = addressing->t_REFI_us_x10 * freq_khz / 10000; + ref_ctrl |= val << EMIF_REG_REFRESH_RATE_SHIFT; + + return ref_ctrl; +} + +static u32 get_sdram_tim_1_reg(const struct lpddr2_ac_timings *timings, + const struct lpddr2_min_tck *min_tck, + const struct lpddr2_addressing *addressing) +{ + u32 tim1 = 0, val = 0; + val = max(min_tck->tWTR, ns_x2_2_cycles(timings->tWTRx2)) - 1; + tim1 |= val << EMIF_REG_T_WTR_SHIFT; + + if (addressing->num_banks == BANKS8) + val = (timings->tFAW * (*T_den) + 4 * (*T_num) - 1) / + (4 * (*T_num)) - 1; + else + val = max(min_tck->tRRD, ns_2_cycles(timings->tRRD)) - 1; + + tim1 |= val << EMIF_REG_T_RRD_SHIFT; + + val = ns_2_cycles(timings->tRASmin + timings->tRPab) - 1; + tim1 |= val << EMIF_REG_T_RC_SHIFT; + + val = max(min_tck->tRAS_MIN, ns_2_cycles(timings->tRASmin)) - 1; + tim1 |= val << EMIF_REG_T_RAS_SHIFT; + + val = max(min_tck->tWR, ns_2_cycles(timings->tWR)) - 1; + tim1 |= val << EMIF_REG_T_WR_SHIFT; + + val = max(min_tck->tRCD, ns_2_cycles(timings->tRCD)) - 1; + tim1 |= val << EMIF_REG_T_RCD_SHIFT; + + val = max(min_tck->tRP_AB, ns_2_cycles(timings->tRPab)) - 1; + tim1 |= val << EMIF_REG_T_RP_SHIFT; + + return tim1; +} + +static u32 get_sdram_tim_2_reg(const struct lpddr2_ac_timings *timings, + const struct lpddr2_min_tck *min_tck) +{ + u32 tim2 = 0, val = 0; + val = max(min_tck->tCKE, timings->tCKE) - 1; + tim2 |= val << EMIF_REG_T_CKE_SHIFT; + + val = max(min_tck->tRTP, ns_x2_2_cycles(timings->tRTPx2)) - 1; + tim2 |= val << EMIF_REG_T_RTP_SHIFT; + + /* + * tXSRD = tRFCab + 10 ns. XSRD and XSNR should have the + * same value + */ + val = ns_2_cycles(timings->tXSR) - 1; + tim2 |= val << EMIF_REG_T_XSRD_SHIFT; + tim2 |= val << EMIF_REG_T_XSNR_SHIFT; + + val = max(min_tck->tXP, ns_x2_2_cycles(timings->tXPx2)) - 1; + tim2 |= val << EMIF_REG_T_XP_SHIFT; + + return tim2; +} + +static u32 get_sdram_tim_3_reg(const struct lpddr2_ac_timings *timings, + const struct lpddr2_min_tck *min_tck, + const struct lpddr2_addressing *addressing) +{ + u32 tim3 = 0, val = 0; + val = min(timings->tRASmax * 10 / addressing->t_REFI_us_x10 - 1, 0xF); + tim3 |= val << EMIF_REG_T_RAS_MAX_SHIFT; + + val = ns_2_cycles(timings->tRFCab) - 1; + tim3 |= val << EMIF_REG_T_RFC_SHIFT; + + val = ns_x2_2_cycles(timings->tDQSCKMAXx2) - 1; + tim3 |= val << EMIF_REG_T_TDQSCKMAX_SHIFT; + + val = ns_2_cycles(timings->tZQCS) - 1; + tim3 |= val << EMIF_REG_ZQ_ZQCS_SHIFT; + + val = max(min_tck->tCKESR, ns_2_cycles(timings->tCKESR)) - 1; + tim3 |= val << EMIF_REG_T_CKESR_SHIFT; + + return tim3; +} + +static u32 get_zq_config_reg(const struct lpddr2_device_details *cs1_device, + const struct lpddr2_addressing *addressing, + u8 volt_ramp) +{ + u32 zq = 0, val = 0; + if (volt_ramp) + val = + EMIF_ZQCS_INTERVAL_DVFS_IN_US * 10 / + addressing->t_REFI_us_x10; + else + val = + EMIF_ZQCS_INTERVAL_NORMAL_IN_US * 10 / + addressing->t_REFI_us_x10; + zq |= val << EMIF_REG_ZQ_REFINTERVAL_SHIFT; + + zq |= (REG_ZQ_ZQCL_MULT - 1) << EMIF_REG_ZQ_ZQCL_MULT_SHIFT; + + zq |= (REG_ZQ_ZQINIT_MULT - 1) << EMIF_REG_ZQ_ZQINIT_MULT_SHIFT; + + zq |= REG_ZQ_SFEXITEN_ENABLE << EMIF_REG_ZQ_SFEXITEN_SHIFT; + + /* + * Assuming that two chipselects have a single calibration resistor + * If there are indeed two calibration resistors, then this flag should + * be enabled to take advantage of dual calibration feature. + * This data should ideally come from board files. But considering + * that none of the boards today have calibration resistors per CS, + * it would be an unnecessary overhead. + */ + zq |= REG_ZQ_DUALCALEN_DISABLE << EMIF_REG_ZQ_DUALCALEN_SHIFT; + + zq |= REG_ZQ_CS0EN_ENABLE << EMIF_REG_ZQ_CS0EN_SHIFT; + + zq |= (cs1_device ? 1 : 0) << EMIF_REG_ZQ_CS1EN_SHIFT; + + return zq; +} + +static u32 get_temp_alert_config(const struct lpddr2_device_details *cs1_device, + const struct lpddr2_addressing *addressing, + u8 is_derated) +{ + u32 alert = 0, interval; + interval = + TEMP_ALERT_POLL_INTERVAL_MS * 10000 / addressing->t_REFI_us_x10; + if (is_derated) + interval *= 4; + alert |= interval << EMIF_REG_TA_REFINTERVAL_SHIFT; + + alert |= TEMP_ALERT_CONFIG_DEVCT_1 << EMIF_REG_TA_DEVCNT_SHIFT; + + alert |= TEMP_ALERT_CONFIG_DEVWDT_32 << EMIF_REG_TA_DEVWDT_SHIFT; + + alert |= 1 << EMIF_REG_TA_SFEXITEN_SHIFT; + + alert |= 1 << EMIF_REG_TA_CS0EN_SHIFT; + + alert |= (cs1_device ? 1 : 0) << EMIF_REG_TA_CS1EN_SHIFT; + + return alert; +} + +static u32 get_read_idle_ctrl_reg(u8 volt_ramp) +{ + u32 idle = 0, val = 0; + if (volt_ramp) + val = ns_2_cycles(READ_IDLE_INTERVAL_DVFS) / 64 - 1; + else + /*Maximum value in normal conditions - suggested by hw team */ + val = 0x1FF; + idle |= val << EMIF_REG_READ_IDLE_INTERVAL_SHIFT; + + idle |= EMIF_REG_READ_IDLE_LEN_VAL << EMIF_REG_READ_IDLE_LEN_SHIFT; + + return idle; +} + +static u32 get_ddr_phy_ctrl_1(u32 freq, u8 RL) +{ + u32 phy = 0, val = 0; + + phy |= (RL + 2) << EMIF_REG_READ_LATENCY_SHIFT; + + if (freq <= 100000000) + val = EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS; + else if (freq <= 200000000) + val = EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ; + else + val = EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ; + phy |= val << EMIF_REG_DLL_SLAVE_DLY_CTRL_SHIFT; + + /* Other fields are constant magic values. Hardcode them together */ + phy |= EMIF_DDR_PHY_CTRL_1_BASE_VAL << + EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHIFT; + + return phy; +} + +static u32 get_emif_mem_size(u32 base) +{ + u32 size_mbytes = 0, temp; + struct emif_device_details dev_details; + struct lpddr2_device_details cs0_dev_details, cs1_dev_details; + u32 emif_nr = emif_num(base); + + emif_reset_phy(base); + dev_details.cs0_device_details = emif_get_device_details(emif_nr, CS0, + &cs0_dev_details); + dev_details.cs1_device_details = emif_get_device_details(emif_nr, CS1, + &cs1_dev_details); + emif_reset_phy(base); + + if (dev_details.cs0_device_details) { + temp = dev_details.cs0_device_details->density; + size_mbytes += lpddr2_density_2_size_in_mbytes[temp]; + } + + if (dev_details.cs1_device_details) { + temp = dev_details.cs1_device_details->density; + size_mbytes += lpddr2_density_2_size_in_mbytes[temp]; + } + /* convert to bytes */ + return size_mbytes << 20; +} + +/* Gets the encoding corresponding to a given DMM section size */ +u32 get_dmm_section_size_map(u32 section_size) +{ + /* + * Section size mapping: + * 0x0: 16-MiB section + * 0x1: 32-MiB section + * 0x2: 64-MiB section + * 0x3: 128-MiB section + * 0x4: 256-MiB section + * 0x5: 512-MiB section + * 0x6: 1-GiB section + * 0x7: 2-GiB section + */ + section_size >>= 24; /* divide by 16 MB */ + return log_2_n_round_down(section_size); +} + +static void emif_calculate_regs( + const struct emif_device_details *emif_dev_details, + u32 freq, struct emif_regs *regs) +{ + u32 temp, sys_freq; + const struct lpddr2_addressing *addressing; + const struct lpddr2_ac_timings *timings; + const struct lpddr2_min_tck *min_tck; + const struct lpddr2_device_details *cs0_dev_details = + emif_dev_details->cs0_device_details; + const struct lpddr2_device_details *cs1_dev_details = + emif_dev_details->cs1_device_details; + const struct lpddr2_device_timings *cs0_dev_timings = + emif_dev_details->cs0_device_timings; + + emif_assert(emif_dev_details); + emif_assert(regs); + /* + * You can not have a device on CS1 without one on CS0 + * So configuring EMIF without a device on CS0 doesn't + * make sense + */ + emif_assert(cs0_dev_details); + emif_assert(cs0_dev_details->type != LPDDR2_TYPE_NVM); + /* + * If there is a device on CS1 it should be same type as CS0 + * (or NVM. But NVM is not supported in this driver yet) + */ + emif_assert((cs1_dev_details == NULL) || + (cs1_dev_details->type == LPDDR2_TYPE_NVM) || + (cs0_dev_details->type == cs1_dev_details->type)); + emif_assert(freq <= MAX_LPDDR2_FREQ); + + set_ddr_clk_period(freq); + + /* + * The device on CS0 is used for all timing calculations + * There is only one set of registers for timings per EMIF. So, if the + * second CS(CS1) has a device, it should have the same timings as the + * device on CS0 + */ + timings = get_timings_table(cs0_dev_timings->ac_timings, freq); + emif_assert(timings); + min_tck = cs0_dev_timings->min_tck; + + temp = addressing_table_index(cs0_dev_details->type, + cs0_dev_details->density, + cs0_dev_details->io_width); + + emif_assert((temp >= 0)); + addressing = &(addressing_table[temp]); + emif_assert(addressing); + + sys_freq = get_sys_clk_freq(); + + regs->sdram_config_init = get_sdram_config_reg(cs0_dev_details, + cs1_dev_details, + addressing, RL_BOOT); + + regs->sdram_config = get_sdram_config_reg(cs0_dev_details, + cs1_dev_details, + addressing, RL_FINAL); + + regs->ref_ctrl = get_sdram_ref_ctrl(freq, addressing); + + regs->sdram_tim1 = get_sdram_tim_1_reg(timings, min_tck, addressing); + + regs->sdram_tim2 = get_sdram_tim_2_reg(timings, min_tck); + + regs->sdram_tim3 = get_sdram_tim_3_reg(timings, min_tck, addressing); + + regs->read_idle_ctrl = get_read_idle_ctrl_reg(LPDDR2_VOLTAGE_STABLE); + + regs->temp_alert_config = + get_temp_alert_config(cs1_dev_details, addressing, 0); + + regs->zq_config = get_zq_config_reg(cs1_dev_details, addressing, + LPDDR2_VOLTAGE_STABLE); + + regs->emif_ddr_phy_ctlr_1_init = + get_ddr_phy_ctrl_1(sys_freq / 2, RL_BOOT); + + regs->emif_ddr_phy_ctlr_1 = + get_ddr_phy_ctrl_1(freq, RL_FINAL); + + regs->freq = freq; + + print_timing_reg(regs->sdram_config_init); + print_timing_reg(regs->sdram_config); + print_timing_reg(regs->ref_ctrl); + print_timing_reg(regs->sdram_tim1); + print_timing_reg(regs->sdram_tim2); + print_timing_reg(regs->sdram_tim3); + print_timing_reg(regs->read_idle_ctrl); + print_timing_reg(regs->temp_alert_config); + print_timing_reg(regs->zq_config); + print_timing_reg(regs->emif_ddr_phy_ctlr_1); + print_timing_reg(regs->emif_ddr_phy_ctlr_1_init); +} +#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */ + +#ifdef CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION +const char *get_lpddr2_type(u8 type_id) +{ + switch (type_id) { + case LPDDR2_TYPE_S4: + return "LPDDR2-S4"; + case LPDDR2_TYPE_S2: + return "LPDDR2-S2"; + default: + return NULL; + } +} + +const char *get_lpddr2_io_width(u8 width_id) +{ + switch (width_id) { + case LPDDR2_IO_WIDTH_8: + return "x8"; + case LPDDR2_IO_WIDTH_16: + return "x16"; + case LPDDR2_IO_WIDTH_32: + return "x32"; + default: + return NULL; + } +} + +const char *get_lpddr2_manufacturer(u32 manufacturer) +{ + switch (manufacturer) { + case LPDDR2_MANUFACTURER_SAMSUNG: + return "Samsung"; + case LPDDR2_MANUFACTURER_QIMONDA: + return "Qimonda"; + case LPDDR2_MANUFACTURER_ELPIDA: + return "Elpida"; + case LPDDR2_MANUFACTURER_ETRON: + return "Etron"; + case LPDDR2_MANUFACTURER_NANYA: + return "Nanya"; + case LPDDR2_MANUFACTURER_HYNIX: + return "Hynix"; + case LPDDR2_MANUFACTURER_MOSEL: + return "Mosel"; + case LPDDR2_MANUFACTURER_WINBOND: + return "Winbond"; + case LPDDR2_MANUFACTURER_ESMT: + return "ESMT"; + case LPDDR2_MANUFACTURER_SPANSION: + return "Spansion"; + case LPDDR2_MANUFACTURER_SST: + return "SST"; + case LPDDR2_MANUFACTURER_ZMOS: + return "ZMOS"; + case LPDDR2_MANUFACTURER_INTEL: + return "Intel"; + case LPDDR2_MANUFACTURER_NUMONYX: + return "Numonyx"; + case LPDDR2_MANUFACTURER_MICRON: + return "Micron"; + default: + return NULL; + } +} + +static void display_sdram_details(u32 emif_nr, u32 cs, + struct lpddr2_device_details *device) +{ + const char *mfg_str; + const char *type_str; + char density_str[10]; + u32 density; + + debug("EMIF%d CS%d\t", emif_nr, cs); + + if (!device) { + debug("None\n"); + return; + } + + mfg_str = get_lpddr2_manufacturer(device->manufacturer); + type_str = get_lpddr2_type(device->type); + + density = lpddr2_density_2_size_in_mbytes[device->density]; + if ((density / 1024 * 1024) == density) { + density /= 1024; + sprintf(density_str, "%d GB", density); + } else + sprintf(density_str, "%d MB", density); + if (mfg_str && type_str) + debug("%s\t\t%s\t%s\n", mfg_str, type_str, density_str); +} + +static u8 is_lpddr2_sdram_present(u32 base, u32 cs, + struct lpddr2_device_details *lpddr2_device) +{ + u32 mr = 0, temp; + + mr = get_mr(base, cs, LPDDR2_MR0); + if (mr > 0xFF) { + /* Mode register value bigger than 8 bit */ + return 0; + } + + temp = (mr & LPDDR2_MR0_DI_MASK) >> LPDDR2_MR0_DI_SHIFT; + if (temp) { + /* Not SDRAM */ + return 0; + } + temp = (mr & LPDDR2_MR0_DNVI_MASK) >> LPDDR2_MR0_DNVI_SHIFT; + + if (temp) { + /* DNV supported - But DNV is only supported for NVM */ + return 0; + } + + mr = get_mr(base, cs, LPDDR2_MR4); + if (mr > 0xFF) { + /* Mode register value bigger than 8 bit */ + return 0; + } + + mr = get_mr(base, cs, LPDDR2_MR5); + if (mr > 0xFF) { + /* Mode register value bigger than 8 bit */ + return 0; + } + + if (!get_lpddr2_manufacturer(mr)) { + /* Manufacturer not identified */ + return 0; + } + lpddr2_device->manufacturer = mr; + + mr = get_mr(base, cs, LPDDR2_MR6); + if (mr >= 0xFF) { + /* Mode register value bigger than 8 bit */ + return 0; + } + + mr = get_mr(base, cs, LPDDR2_MR7); + if (mr >= 0xFF) { + /* Mode register value bigger than 8 bit */ + return 0; + } + + mr = get_mr(base, cs, LPDDR2_MR8); + if (mr >= 0xFF) { + /* Mode register value bigger than 8 bit */ + return 0; + } + + temp = (mr & MR8_TYPE_MASK) >> MR8_TYPE_SHIFT; + if (!get_lpddr2_type(temp)) { + /* Not SDRAM */ + return 0; + } + lpddr2_device->type = temp; + + temp = (mr & MR8_DENSITY_MASK) >> MR8_DENSITY_SHIFT; + if (temp > LPDDR2_DENSITY_32Gb) { + /* Density not supported */ + return 0; + } + lpddr2_device->density = temp; + + temp = (mr & MR8_IO_WIDTH_MASK) >> MR8_IO_WIDTH_SHIFT; + if (!get_lpddr2_io_width(temp)) { + /* IO width unsupported value */ + return 0; + } + lpddr2_device->io_width = temp; + + /* + * If all the above tests pass we should + * have a device on this chip-select + */ + return 1; +} + +struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs, + struct lpddr2_device_details *lpddr2_dev_details) +{ + u32 phy; + u32 base = (emif_nr == 1) ? EMIF1_BASE : EMIF2_BASE; + + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + if (!lpddr2_dev_details) + return NULL; + + /* Do the minimum init for mode register accesses */ + if (!(running_from_sdram() || warm_reset())) { + phy = get_ddr_phy_ctrl_1(get_sys_clk_freq() / 2, RL_BOOT); + writel(phy, &emif->emif_ddr_phy_ctrl_1); + } + + if (!(is_lpddr2_sdram_present(base, cs, lpddr2_dev_details))) + return NULL; + + display_sdram_details(emif_num(base), cs, lpddr2_dev_details); + + return lpddr2_dev_details; +} +#endif /* CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION */ + +static void do_sdram_init(u32 base) +{ + const struct emif_regs *regs; + u32 in_sdram, emif_nr; + + debug(">>do_sdram_init() %x\n", base); + + in_sdram = running_from_sdram(); + emif_nr = (base == EMIF1_BASE) ? 1 : 2; + +#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS + emif_get_reg_dump(emif_nr, ®s); + if (!regs) { + debug("EMIF: reg dump not provided\n"); + return; + } +#else + /* + * The user has not provided the register values. We need to + * calculate it based on the timings and the DDR frequency + */ + struct emif_device_details dev_details; + struct emif_regs calculated_regs; + + /* + * Get device details: + * - Discovered if CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION is set + * - Obtained from user otherwise + */ + struct lpddr2_device_details cs0_dev_details, cs1_dev_details; + emif_reset_phy(base); + dev_details.cs0_device_details = emif_get_device_details(emif_nr, CS0, + &cs0_dev_details); + dev_details.cs1_device_details = emif_get_device_details(emif_nr, CS1, + &cs1_dev_details); + emif_reset_phy(base); + + /* Return if no devices on this EMIF */ + if (!dev_details.cs0_device_details && + !dev_details.cs1_device_details) { + return; + } + + /* + * Get device timings: + * - Default timings specified by JESD209-2 if + * CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS is set + * - Obtained from user otherwise + */ + emif_get_device_timings(emif_nr, &dev_details.cs0_device_timings, + &dev_details.cs1_device_timings); + + /* Calculate the register values */ + emif_calculate_regs(&dev_details, omap_ddr_clk(), &calculated_regs); + regs = &calculated_regs; +#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */ + + /* + * Initializing the LPDDR2 device can not happen from SDRAM. + * Changing the timing registers in EMIF can happen(going from one + * OPP to another) + */ + if (!(in_sdram || warm_reset())) { + if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2) + lpddr2_init(base, regs); + else + ddr3_init(base, regs); + } + if (warm_reset() && (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3)) { + set_lpmode_selfrefresh(base); + emif_reset_phy(base); + if (omap_revision() == DRA752_ES1_0) + ddr3_sw_leveling(base, regs); + else + ddr3_leveling(base, regs); + } + + /* Write to the shadow registers */ + emif_update_timings(base, regs); + + debug("<<do_sdram_init() %x\n", base); +} + +void emif_post_init_config(u32 base) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + u32 omap_rev = omap_revision(); + + /* reset phy on ES2.0 */ + if (omap_rev == OMAP4430_ES2_0) + emif_reset_phy(base); + + /* Put EMIF back in smart idle on ES1.0 */ + if (omap_rev == OMAP4430_ES1_0) + writel(0x80000000, &emif->emif_pwr_mgmt_ctrl); +} + +void dmm_init(u32 base) +{ + const struct dmm_lisa_map_regs *lisa_map_regs; + u32 i, section, valid; + +#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS + emif_get_dmm_regs(&lisa_map_regs); +#else + u32 emif1_size, emif2_size, mapped_size, section_map = 0; + u32 section_cnt, sys_addr; + struct dmm_lisa_map_regs lis_map_regs_calculated = {0}; + + mapped_size = 0; + section_cnt = 3; + sys_addr = CONFIG_SYS_SDRAM_BASE; + emif1_size = get_emif_mem_size(EMIF1_BASE); + emif2_size = get_emif_mem_size(EMIF2_BASE); + debug("emif1_size 0x%x emif2_size 0x%x\n", emif1_size, emif2_size); + + if (!emif1_size && !emif2_size) + return; + + /* symmetric interleaved section */ + if (emif1_size && emif2_size) { + mapped_size = min(emif1_size, emif2_size); + section_map = DMM_LISA_MAP_INTERLEAVED_BASE_VAL; + section_map |= 0 << EMIF_SDRC_ADDR_SHIFT; + /* only MSB */ + section_map |= (sys_addr >> 24) << + EMIF_SYS_ADDR_SHIFT; + section_map |= get_dmm_section_size_map(mapped_size * 2) + << EMIF_SYS_SIZE_SHIFT; + lis_map_regs_calculated.dmm_lisa_map_3 = section_map; + emif1_size -= mapped_size; + emif2_size -= mapped_size; + sys_addr += (mapped_size * 2); + section_cnt--; + } + + /* + * Single EMIF section(we can have a maximum of 1 single EMIF + * section- either EMIF1 or EMIF2 or none, but not both) + */ + if (emif1_size) { + section_map = DMM_LISA_MAP_EMIF1_ONLY_BASE_VAL; + section_map |= get_dmm_section_size_map(emif1_size) + << EMIF_SYS_SIZE_SHIFT; + /* only MSB */ + section_map |= (mapped_size >> 24) << + EMIF_SDRC_ADDR_SHIFT; + /* only MSB */ + section_map |= (sys_addr >> 24) << EMIF_SYS_ADDR_SHIFT; + section_cnt--; + } + if (emif2_size) { + section_map = DMM_LISA_MAP_EMIF2_ONLY_BASE_VAL; + section_map |= get_dmm_section_size_map(emif2_size) << + EMIF_SYS_SIZE_SHIFT; + /* only MSB */ + section_map |= mapped_size >> 24 << EMIF_SDRC_ADDR_SHIFT; + /* only MSB */ + section_map |= sys_addr >> 24 << EMIF_SYS_ADDR_SHIFT; + section_cnt--; + } + + if (section_cnt == 2) { + /* Only 1 section - either symmetric or single EMIF */ + lis_map_regs_calculated.dmm_lisa_map_3 = section_map; + lis_map_regs_calculated.dmm_lisa_map_2 = 0; + lis_map_regs_calculated.dmm_lisa_map_1 = 0; + } else { + /* 2 sections - 1 symmetric, 1 single EMIF */ + lis_map_regs_calculated.dmm_lisa_map_2 = section_map; + lis_map_regs_calculated.dmm_lisa_map_1 = 0; + } + + /* TRAP for invalid TILER mappings in section 0 */ + lis_map_regs_calculated.dmm_lisa_map_0 = DMM_LISA_MAP_0_INVAL_ADDR_TRAP; + + if (omap_revision() >= OMAP4460_ES1_0) + lis_map_regs_calculated.is_ma_present = 1; + + lisa_map_regs = &lis_map_regs_calculated; +#endif + struct dmm_lisa_map_regs *hw_lisa_map_regs = + (struct dmm_lisa_map_regs *)base; + + writel(0, &hw_lisa_map_regs->dmm_lisa_map_3); + writel(0, &hw_lisa_map_regs->dmm_lisa_map_2); + writel(0, &hw_lisa_map_regs->dmm_lisa_map_1); + writel(0, &hw_lisa_map_regs->dmm_lisa_map_0); + + writel(lisa_map_regs->dmm_lisa_map_3, + &hw_lisa_map_regs->dmm_lisa_map_3); + writel(lisa_map_regs->dmm_lisa_map_2, + &hw_lisa_map_regs->dmm_lisa_map_2); + writel(lisa_map_regs->dmm_lisa_map_1, + &hw_lisa_map_regs->dmm_lisa_map_1); + writel(lisa_map_regs->dmm_lisa_map_0, + &hw_lisa_map_regs->dmm_lisa_map_0); + + if (lisa_map_regs->is_ma_present) { + hw_lisa_map_regs = + (struct dmm_lisa_map_regs *)MA_BASE; + + writel(lisa_map_regs->dmm_lisa_map_3, + &hw_lisa_map_regs->dmm_lisa_map_3); + writel(lisa_map_regs->dmm_lisa_map_2, + &hw_lisa_map_regs->dmm_lisa_map_2); + writel(lisa_map_regs->dmm_lisa_map_1, + &hw_lisa_map_regs->dmm_lisa_map_1); + writel(lisa_map_regs->dmm_lisa_map_0, + &hw_lisa_map_regs->dmm_lisa_map_0); + } + + /* + * EMIF should be configured only when + * memory is mapped on it. Using emif1_enabled + * and emif2_enabled variables for this. + */ + emif1_enabled = 0; + emif2_enabled = 0; + for (i = 0; i < 4; i++) { + section = __raw_readl(DMM_BASE + i*4); + valid = (section & EMIF_SDRC_MAP_MASK) >> + (EMIF_SDRC_MAP_SHIFT); + if (valid == 3) { + emif1_enabled = 1; + emif2_enabled = 1; + break; + } else if (valid == 1) { + emif1_enabled = 1; + } else if (valid == 2) { + emif2_enabled = 1; + } + } + +} + +/* + * SDRAM initialization: + * SDRAM initialization has two parts: + * 1. Configuring the SDRAM device + * 2. Update the AC timings related parameters in the EMIF module + * (1) should be done only once and should not be done while we are + * running from SDRAM. + * (2) can and should be done more than once if OPP changes. + * Particularly, this may be needed when we boot without SPL and + * and using Configuration Header(CH). ROM code supports only at 50% OPP + * at boot (low power boot). So u-boot has to switch to OPP100 and update + * the frequency. So, + * Doing (1) and (2) makes sense - first time initialization + * Doing (2) and not (1) makes sense - OPP change (when using CH) + * Doing (1) and not (2) doen't make sense + * See do_sdram_init() for the details + */ +void sdram_init(void) +{ + u32 in_sdram, size_prog, size_detect; + u32 sdram_type = emif_sdram_type(); + + debug(">>sdram_init()\n"); + + if (omap_hw_init_context() == OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL) + return; + + in_sdram = running_from_sdram(); + debug("in_sdram = %d\n", in_sdram); + + if (!in_sdram) { + if ((sdram_type == EMIF_SDRAM_TYPE_LPDDR2) && !warm_reset()) + bypass_dpll((*prcm)->cm_clkmode_dpll_core); + else if (sdram_type == EMIF_SDRAM_TYPE_DDR3) + writel(CM_DLL_CTRL_NO_OVERRIDE, (*prcm)->cm_dll_ctrl); + } + + if (!in_sdram) + dmm_init(DMM_BASE); + + if (emif1_enabled) + do_sdram_init(EMIF1_BASE); + + if (emif2_enabled) + do_sdram_init(EMIF2_BASE); + + if (!(in_sdram || warm_reset())) { + if (emif1_enabled) + emif_post_init_config(EMIF1_BASE); + if (emif2_enabled) + emif_post_init_config(EMIF2_BASE); + } + + /* for the shadow registers to take effect */ + if (sdram_type == EMIF_SDRAM_TYPE_LPDDR2) + freq_update_core(); + + /* Do some testing after the init */ + if (!in_sdram) { + size_prog = omap_sdram_size(); + size_prog = log_2_n_round_down(size_prog); + size_prog = (1 << size_prog); + + size_detect = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, + size_prog); + /* Compare with the size programmed */ + if (size_detect != size_prog) { + printf("SDRAM: identified size not same as expected" + " size identified: %x expected: %x\n", + size_detect, + size_prog); + } else + debug("get_ram_size() successful"); + } + + debug("<<sdram_init()\n"); +} diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c new file mode 100644 index 0000000..5df116e --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c @@ -0,0 +1,318 @@ +/* + * + * Common functions for OMAP4/5 based boards + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Author : + * Aneesh V <aneesh@ti.com> + * Steve Sakoman <steve@sakoman.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <spl.h> +#include <asm/arch/sys_proto.h> +#include <asm/sizes.h> +#include <asm/emif.h> +#include <asm/omap_common.h> +#include <linux/compiler.h> +#include <asm/cache.h> +#include <asm/system.h> + +#define ARMV7_DCACHE_WRITEBACK 0xe +#define ARMV7_DOMAIN_CLIENT 1 +#define ARMV7_DOMAIN_MASK (0x3 << 0) + +DECLARE_GLOBAL_DATA_PTR; + +void do_set_mux(u32 base, struct pad_conf_entry const *array, int size) +{ + int i; + struct pad_conf_entry *pad = (struct pad_conf_entry *) array; + + for (i = 0; i < size; i++, pad++) + writew(pad->val, base + pad->offset); +} + +static void set_mux_conf_regs(void) +{ + switch (omap_hw_init_context()) { + case OMAP_INIT_CONTEXT_SPL: + set_muxconf_regs_essential(); + break; + case OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL: +#ifdef CONFIG_SYS_ENABLE_PADS_ALL + set_muxconf_regs_non_essential(); +#endif + break; + case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR: + case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH: + set_muxconf_regs_essential(); +#ifdef CONFIG_SYS_ENABLE_PADS_ALL + set_muxconf_regs_non_essential(); +#endif + break; + } +} + +u32 cortex_rev(void) +{ + + unsigned int rev; + + /* Read Main ID Register (MIDR) */ + asm ("mrc p15, 0, %0, c0, c0, 0" : "=r" (rev)); + + return rev; +} + +static void omap_rev_string(void) +{ + u32 omap_rev = omap_revision(); + u32 soc_variant = (omap_rev & 0xF0000000) >> 28; + u32 omap_variant = (omap_rev & 0xFFFF0000) >> 16; + u32 major_rev = (omap_rev & 0x00000F00) >> 8; + u32 minor_rev = (omap_rev & 0x000000F0) >> 4; + + if (soc_variant) + printf("OMAP"); + else + printf("DRA"); + printf("%x ES%x.%x\n", omap_variant, major_rev, + minor_rev); +} + +#ifdef CONFIG_SPL_BUILD +void spl_display_print(void) +{ + omap_rev_string(); +} +#endif + +void __weak srcomp_enable(void) +{ +} + +#ifdef CONFIG_ARCH_CPU_INIT +/* + * SOC specific cpu init + */ +int arch_cpu_init(void) +{ + save_omap_boot_params(); + return 0; +} +#endif /* CONFIG_ARCH_CPU_INIT */ + +/* + * Routine: s_init + * Description: Does early system init of watchdog, muxing, andclocks + * Watchdog disable is done always. For the rest what gets done + * depends on the boot mode in which this function is executed + * 1. s_init of SPL running from SRAM + * 2. s_init of U-Boot running from FLASH + * 3. s_init of U-Boot loaded to SDRAM by SPL + * 4. s_init of U-Boot loaded to SDRAM by ROM code using the + * Configuration Header feature + * Please have a look at the respective functions to see what gets + * done in each of these cases + * This function is called with SRAM stack. + */ +void s_init(void) +{ + /* + * Save the boot parameters passed from romcode. + * We cannot delay the saving further than this, + * to prevent overwrites. + */ +#ifdef CONFIG_SPL_BUILD + save_omap_boot_params(); +#endif + init_omap_revision(); + hw_data_init(); + +#ifdef CONFIG_SPL_BUILD + if (warm_reset() && (omap_revision() <= OMAP5430_ES1_0)) + force_emif_self_refresh(); +#endif + watchdog_init(); + set_mux_conf_regs(); +#ifdef CONFIG_SPL_BUILD + srcomp_enable(); + setup_clocks_for_console(); + + gd = &gdata; + + preloader_console_init(); + do_io_settings(); +#endif + prcm_init(); +#ifdef CONFIG_SPL_BUILD + /* For regular u-boot sdram_init() is called from dram_init() */ + sdram_init(); +#endif +} + +/* + * Routine: wait_for_command_complete + * Description: Wait for posting to finish on watchdog + */ +void wait_for_command_complete(struct watchdog *wd_base) +{ + int pending = 1; + do { + pending = readl(&wd_base->wwps); + } while (pending); +} + +/* + * Routine: watchdog_init + * Description: Shut down watch dogs + */ +void watchdog_init(void) +{ + struct watchdog *wd2_base = (struct watchdog *)WDT2_BASE; + + writel(WD_UNLOCK1, &wd2_base->wspr); + wait_for_command_complete(wd2_base); + writel(WD_UNLOCK2, &wd2_base->wspr); +} + + +/* + * This function finds the SDRAM size available in the system + * based on DMM section configurations + * This is needed because the size of memory installed may be + * different on different versions of the board + */ +u32 omap_sdram_size(void) +{ + u32 section, i, valid; + u64 sdram_start = 0, sdram_end = 0, addr, + size, total_size = 0, trap_size = 0; + + for (i = 0; i < 4; i++) { + section = __raw_readl(DMM_BASE + i*4); + valid = (section & EMIF_SDRC_ADDRSPC_MASK) >> + (EMIF_SDRC_ADDRSPC_SHIFT); + addr = section & EMIF_SYS_ADDR_MASK; + + /* See if the address is valid */ + if ((addr >= DRAM_ADDR_SPACE_START) && + (addr < DRAM_ADDR_SPACE_END)) { + size = ((section & EMIF_SYS_SIZE_MASK) >> + EMIF_SYS_SIZE_SHIFT); + size = 1 << size; + size *= SZ_16M; + + if (valid != DMM_SDRC_ADDR_SPC_INVALID) { + if (!sdram_start || (addr < sdram_start)) + sdram_start = addr; + if (!sdram_end || ((addr + size) > sdram_end)) + sdram_end = addr + size; + } else { + trap_size = size; + } + + } + + } + total_size = (sdram_end - sdram_start) - (trap_size); + + return total_size; +} + + +/* + * Routine: dram_init + * Description: sets uboots idea of sdram size + */ +int dram_init(void) +{ + sdram_init(); + gd->ram_size = omap_sdram_size(); + return 0; +} + +/* + * Print board information + */ +int checkboard(void) +{ + puts(sysinfo.board_string); + return 0; +} + +/* + * get_device_type(): tell if GP/HS/EMU/TST + */ +u32 get_device_type(void) +{ + return (readl((*ctrl)->control_status) & + (DEVICE_TYPE_MASK)) >> DEVICE_TYPE_SHIFT; +} + +/* + * Print CPU information + */ +int print_cpuinfo(void) +{ + puts("CPU : "); + omap_rev_string(); + + return 0; +} +#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{ + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +} + +void dram_bank_mmu_setup(int bank) +{ + bd_t *bd = gd->bd; + int i; + + u32 start = bd->bi_dram[bank].start >> 20; + u32 size = bd->bi_dram[bank].size >> 20; + u32 end = start + size; + + debug("%s: bank: %d\n", __func__, bank); + for (i = start; i < end; i++) + set_section_dcache(i, ARMV7_DCACHE_WRITEBACK); + +} + +void arm_init_domains(void) +{ + u32 reg; + + reg = get_dacr(); + /* + * Set DOMAIN to client access so that all permissions + * set in pagetables are validated by the mmu. + */ + reg &= ~ARMV7_DOMAIN_MASK; + reg |= ARMV7_DOMAIN_CLIENT; + set_dacr(reg); +} +#endif diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S new file mode 100644 index 0000000..c489536 --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S @@ -0,0 +1,48 @@ +/* + * Board specific setup info + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Author : + * Aneesh V <aneesh@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/omap.h> +#include <asm/omap_common.h> +#include <asm/arch/spl.h> +#include <linux/linkage.h> + +ENTRY(save_boot_params) + ldr r1, =OMAP_SRAM_SCRATCH_BOOT_PARAMS + str r0, [r1] + bx lr +ENDPROC(save_boot_params) + +ENTRY(set_pl310_ctrl_reg) + PUSH {r4-r11, lr} @ save registers - ROM code may pollute + @ our registers + LDR r12, =0x102 @ Set PL310 control register - value in R0 + .word 0xe1600070 @ SMC #0 - hand assembled because -march=armv5 + @ call ROM Code API to set control register + POP {r4-r11, pc} +ENDPROC(set_pl310_ctrl_reg) diff --git a/arch/arm/cpu/armv7/omap-common/mem-common.c b/arch/arm/cpu/armv7/omap-common/mem-common.c new file mode 100644 index 0000000..878f0e3 --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/mem-common.c @@ -0,0 +1,45 @@ +/* + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Steve Sakoman <steve@sakoman.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/arch/cpu.h> +#include <asm/arch/sys_proto.h> + +struct gpmc *gpmc_cfg; + +/***************************************************** + * gpmc_init(): init gpmc bus + * This code can only be executed from SRAM or SDRAM. + *****************************************************/ +void gpmc_init(void) +{ + gpmc_cfg = (struct gpmc *)GPMC_BASE; + + /* global settings */ + writel(0, &gpmc_cfg->irqenable); /* isr's sources masked */ + writel(0, &gpmc_cfg->timeout_control);/* timeout disable */ + + /* + * Disable the GPMC0 config set by ROM code + * It conflicts with our MPDB (both at 0x08000000) + */ + writel(0, &gpmc_cfg->cs[0].config7); +} diff --git a/arch/arm/cpu/armv7/omap-common/reset.c b/arch/arm/cpu/armv7/omap-common/reset.c new file mode 100644 index 0000000..57ea9d9 --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/reset.c @@ -0,0 +1,45 @@ +/* + * + * Common layer for reset related functionality of OMAP based socs. + * + * (C) Copyright 2012 + * Texas Instruments, <www.ti.com> + * + * Sricharan R <r.sricharan@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <config.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <linux/compiler.h> + +void __weak reset_cpu(unsigned long ignored) +{ + writel(PRM_RSTCTRL_RESET, PRM_RSTCTRL); +} + +u32 __weak warm_reset(void) +{ + return (readl(PRM_RSTST) & PRM_RSTST_WARM_RESET_MASK); +} + +void __weak setup_warmreset_time(void) +{ +} diff --git a/arch/arm/cpu/armv7/omap-common/timer.c b/arch/arm/cpu/armv7/omap-common/timer.c new file mode 100644 index 0000000..5926a5a --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/timer.c @@ -0,0 +1,124 @@ +/* + * (C) Copyright 2008 + * Texas Instruments + * + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Moahmmed Khasim <khasim@ti.com> + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * Alex Zuepke <azu@sysgo.de> + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/clock.h> + +DECLARE_GLOBAL_DATA_PTR; + +static struct gptimer *timer_base = (struct gptimer *)CONFIG_SYS_TIMERBASE; + +/* + * Nothing really to do with interrupts, just starts up a counter. + */ + +#define TIMER_CLOCK (V_SCLK / (2 << CONFIG_SYS_PTV)) +#define TIMER_OVERFLOW_VAL 0xffffffff +#define TIMER_LOAD_VAL 0 + +int timer_init(void) +{ + /* start the counter ticking up, reload value on overflow */ + writel(TIMER_LOAD_VAL, &timer_base->tldr); + /* enable timer */ + writel((CONFIG_SYS_PTV << 2) | TCLR_PRE | TCLR_AR | TCLR_ST, + &timer_base->tclr); + + /* reset time, capture current incrementer value time */ + gd->arch.lastinc = readl(&timer_base->tcrr) / + (TIMER_CLOCK / CONFIG_SYS_HZ); + gd->arch.tbl = 0; /* start "advancing" time stamp from 0 */ + + return 0; +} + +/* + * timer without interrupts + */ +ulong get_timer(ulong base) +{ + return get_timer_masked() - base; +} + +/* delay x useconds */ +void __udelay(unsigned long usec) +{ + long tmo = usec * (TIMER_CLOCK / 1000) / 1000; + unsigned long now, last = readl(&timer_base->tcrr); + + while (tmo > 0) { + now = readl(&timer_base->tcrr); + if (last > now) /* count up timer overflow */ + tmo -= TIMER_OVERFLOW_VAL - last + now + 1; + else + tmo -= now - last; + last = now; + } +} + +ulong get_timer_masked(void) +{ + /* current tick value */ + ulong now = readl(&timer_base->tcrr) / (TIMER_CLOCK / CONFIG_SYS_HZ); + + if (now >= gd->arch.lastinc) { /* normal mode (non roll) */ + /* move stamp fordward with absoulte diff ticks */ + gd->arch.tbl += (now - gd->arch.lastinc); + } else { /* we have rollover of incrementer */ + gd->arch.tbl += ((TIMER_LOAD_VAL / (TIMER_CLOCK / + CONFIG_SYS_HZ)) - gd->arch.lastinc) + now; + } + gd->arch.lastinc = now; + return gd->arch.tbl; +} + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + return CONFIG_SYS_HZ; +} diff --git a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds new file mode 100644 index 0000000..bd218c0 --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds @@ -0,0 +1,63 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * Aneesh V <aneesh@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\ + LENGTH = CONFIG_SPL_MAX_SIZE } +MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \ + LENGTH = CONFIG_SPL_BSS_MAX_SIZE } + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + .text : + { + __start = .; + arch/arm/cpu/armv7/start.o (.text*) + *(.text*) + } >.sram + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram + + . = ALIGN(4); + .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram + + . = ALIGN(4); + __image_copy_end = .; + _end = .; + + .bss : + { + . = ALIGN(4); + __bss_start = .; + *(.bss*) + . = ALIGN(4); + __bss_end = .; + } >.sdram +} diff --git a/arch/arm/cpu/armv7/omap-common/utils.c b/arch/arm/cpu/armv7/omap-common/utils.c new file mode 100644 index 0000000..ea935da --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/utils.c @@ -0,0 +1,57 @@ +/* + * Copyright 2011 Linaro Limited + * Aneesh V <aneesh@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +static void do_cancel_out(u32 *num, u32 *den, u32 factor) +{ + while (1) { + if (((*num)/factor*factor == (*num)) && + ((*den)/factor*factor == (*den))) { + (*num) /= factor; + (*den) /= factor; + } else + break; + } +} + +/* + * Cancel out the denominator and numerator of a fraction + * to get smaller numerator and denominator. + */ +void cancel_out(u32 *num, u32 *den, u32 den_limit) +{ + do_cancel_out(num, den, 2); + do_cancel_out(num, den, 3); + do_cancel_out(num, den, 5); + do_cancel_out(num, den, 7); + do_cancel_out(num, den, 11); + do_cancel_out(num, den, 13); + do_cancel_out(num, den, 17); + while ((*den) > den_limit) { + *num /= 2; + /* + * Round up the denominator so that the final fraction + * (num/den) is always <= the desired value + */ + *den = (*den + 1) / 2; + } +} diff --git a/arch/arm/cpu/armv7/omap-common/vc.c b/arch/arm/cpu/armv7/omap-common/vc.c new file mode 100644 index 0000000..a68f1d1 --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/vc.c @@ -0,0 +1,151 @@ +/* + * Voltage Controller implementation for OMAP + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Nishanth Menon + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <asm/omap_common.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/clock.h> + +/* + * Define Master code if there are multiple masters on the I2C_SR bus. + * Normally not required + */ +#ifndef CONFIG_OMAP_VC_I2C_HS_MCODE +#define CONFIG_OMAP_VC_I2C_HS_MCODE 0x0 +#endif + +/* Register defines and masks for VC IP Block */ +/* PRM_VC_CFG_I2C_MODE */ +#define PRM_VC_CFG_I2C_MODE_DFILTEREN_BIT (0x1 << 6) +#define PRM_VC_CFG_I2C_MODE_SRMODEEN_BIT (0x1 << 4) +#define PRM_VC_CFG_I2C_MODE_HSMODEEN_BIT (0x1 << 3) +#define PRM_VC_CFG_I2C_MODE_HSMCODE_SHIFT 0x0 +#define PRM_VC_CFG_I2C_MODE_HSMCODE_MASK 0x3 + +/* PRM_VC_CFG_I2C_CLK */ +#define PRM_VC_CFG_I2C_CLK_HSCLL_SHIFT 24 +#define PRM_VC_CFG_I2C_CLK_HSCLL_MASK 0xFF +#define PRM_VC_CFG_I2C_CLK_HSCLH_SHIFT 16 +#define PRM_VC_CFG_I2C_CLK_HSCLH_MASK 0xFF +#define PRM_VC_CFG_I2C_CLK_SCLH_SHIFT 0 +#define PRM_VC_CFG_I2C_CLK_SCLH_MASK 0xFF +#define PRM_VC_CFG_I2C_CLK_SCLL_SHIFT 8 +#define PRM_VC_CFG_I2C_CLK_SCLL_MASK (0xFF << 8) + +/* PRM_VC_VAL_BYPASS */ +#define PRM_VC_VAL_BYPASS_VALID_BIT (0x1 << 24) +#define PRM_VC_VAL_BYPASS_SLAVEADDR_SHIFT 0 +#define PRM_VC_VAL_BYPASS_SLAVEADDR_MASK 0x7F +#define PRM_VC_VAL_BYPASS_REGADDR_SHIFT 8 +#define PRM_VC_VAL_BYPASS_REGADDR_MASK 0xFF +#define PRM_VC_VAL_BYPASS_DATA_SHIFT 16 +#define PRM_VC_VAL_BYPASS_DATA_MASK 0xFF + +/** + * omap_vc_init() - Initialization for Voltage controller + * @speed_khz: I2C buspeed in KHz + */ +static void omap_vc_init(u16 speed_khz) +{ + u32 val; + u32 sys_clk_khz, cycles_hi, cycles_low; + + sys_clk_khz = get_sys_clk_freq() / 1000; + + if (speed_khz > 400) { + puts("higher speed requested - throttle to 400Khz\n"); + speed_khz = 400; + } + + /* + * Setup the dedicated I2C controller for Voltage Control + * I2C clk - high period 40% low period 60% + */ + speed_khz /= 10; + cycles_hi = sys_clk_khz * 4 / speed_khz; + cycles_low = sys_clk_khz * 6 / speed_khz; + /* values to be set in register - less by 5 & 7 respectively */ + cycles_hi -= 5; + cycles_low -= 7; + val = (cycles_hi << PRM_VC_CFG_I2C_CLK_SCLH_SHIFT) | + (cycles_low << PRM_VC_CFG_I2C_CLK_SCLL_SHIFT); + writel(val, (*prcm)->prm_vc_cfg_i2c_clk); + + val = CONFIG_OMAP_VC_I2C_HS_MCODE << + PRM_VC_CFG_I2C_MODE_HSMCODE_SHIFT; + /* No HS mode for now */ + val &= ~PRM_VC_CFG_I2C_MODE_HSMODEEN_BIT; + writel(val, (*prcm)->prm_vc_cfg_i2c_mode); +} + +/** + * omap_vc_bypass_send_value() - Send a data using VC Bypass command + * @sa: 7 bit I2C slave address of the PMIC + * @reg_addr: I2C register address(8 bit) address in PMIC + * @reg_data: what 8 bit data to write + */ +int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data) +{ + /* + * Unfortunately we need to loop here instead of a defined time + * use arbitary large value + */ + u32 timeout = 0xFFFF; + u32 reg_val; + + sa &= PRM_VC_VAL_BYPASS_SLAVEADDR_MASK; + reg_addr &= PRM_VC_VAL_BYPASS_REGADDR_MASK; + reg_data &= PRM_VC_VAL_BYPASS_DATA_MASK; + + /* program VC to send data */ + reg_val = sa << PRM_VC_VAL_BYPASS_SLAVEADDR_SHIFT | + reg_addr << PRM_VC_VAL_BYPASS_REGADDR_SHIFT | + reg_data << PRM_VC_VAL_BYPASS_DATA_SHIFT; + writel(reg_val, (*prcm)->prm_vc_val_bypass); + + /* Signal VC to send data */ + writel(reg_val | PRM_VC_VAL_BYPASS_VALID_BIT, + (*prcm)->prm_vc_val_bypass); + + /* Wait on VC to complete transmission */ + do { + reg_val = readl((*prcm)->prm_vc_val_bypass) & + PRM_VC_VAL_BYPASS_VALID_BIT; + if (!reg_val) + break; + + sdelay(100); + } while (--timeout); + + /* Optional: cleanup PRM_IRQSTATUS_Ax */ + /* In case we can do something about it in future.. */ + if (!timeout) + return -1; + + /* All good.. */ + return 0; +} + +void sri2c_init(void) +{ + static int sri2c = 1; + + if (sri2c) { + omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ); + sri2c = 0; + } + return; +} diff --git a/arch/arm/cpu/armv7/omap3/Makefile b/arch/arm/cpu/armv7/omap3/Makefile new file mode 100644 index 0000000..de167ee --- /dev/null +++ b/arch/arm/cpu/armv7/omap3/Makefile @@ -0,0 +1,58 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +SOBJS := lowlevel_init.o + +COBJS += board.o +COBJS += clock.o +COBJS += mem.o +COBJS += sys_info.o +ifdef CONFIG_SPL_BUILD +COBJS-$(CONFIG_SPL_OMAP3_ID_NAND) += spl_id_nand.o +endif + +COBJS-$(CONFIG_DRIVER_TI_EMAC) += emac.o +COBJS-$(CONFIG_EMIF4) += emif4.o +COBJS-$(CONFIG_SDRC) += sdrc.o +COBJS-$(CONFIG_USB_MUSB_AM35X) += am35x_musb.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(COBJS-y) $(SOBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/omap3/am35x_musb.c b/arch/arm/cpu/armv7/omap3/am35x_musb.c new file mode 100644 index 0000000..7183c4f --- /dev/null +++ b/arch/arm/cpu/armv7/omap3/am35x_musb.c @@ -0,0 +1,75 @@ +/* + * This file configures the internal USB PHY in AM35X. + * + * Copyright (C) 2012 Ilya Yanok <ilya.yanok@gmail.com> + * + * Based on omap_phy_internal.c code from Linux by + * Hema HK <hemahk@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + * + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/am35x_def.h> + +void am35x_musb_reset(void) +{ + /* Reset the musb interface */ + clrsetbits_le32(&am35x_scm_general_regs->ip_sw_reset, + 0, USBOTGSS_SW_RST); + clrsetbits_le32(&am35x_scm_general_regs->ip_sw_reset, + USBOTGSS_SW_RST, 0); +} + +void am35x_musb_phy_power(u8 on) +{ + unsigned long start = get_timer(0); + + if (on) { + /* + * Start the on-chip PHY and its PLL. + */ + clrsetbits_le32(&am35x_scm_general_regs->devconf2, + CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN, + CONF2_PHY_PLLON); + + debug("Waiting for PHY clock good...\n"); + while (!(readl(&am35x_scm_general_regs->devconf2) + & CONF2_PHYCLKGD)) { + + if (get_timer(start) > CONFIG_SYS_HZ / 10) { + printf("musb PHY clock good timed out\n"); + break; + } + } + } else { + /* + * Power down the on-chip PHY. + */ + clrsetbits_le32(&am35x_scm_general_regs->devconf2, + CONF2_PHY_PLLON, + CONF2_PHYPWRDN | CONF2_OTGPWRDN); + } +} + +void am35x_musb_clear_irq(void) +{ + clrsetbits_le32(&am35x_scm_general_regs->lvl_intr_clr, + 0, USBOTGSS_INT_CLR); + readl(&am35x_scm_general_regs->lvl_intr_clr); +} + diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c new file mode 100644 index 0000000..b72fadc --- /dev/null +++ b/arch/arm/cpu/armv7/omap3/board.c @@ -0,0 +1,504 @@ +/* + * + * Common board functions for OMAP3 based boards. + * + * (C) Copyright 2004-2008 + * Texas Instruments, <www.ti.com> + * + * Author : + * Sunil Kumar <sunilsaini05@gmail.com> + * Shashi Ranjan <shashiranjanmca05@gmail.com> + * + * Derived from Beagle Board and 3430 SDP code by + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mem.h> +#include <asm/cache.h> +#include <asm/armv7.h> +#include <asm/arch/gpio.h> +#include <asm/omap_common.h> +#include <asm/arch/mmc_host_def.h> +#include <i2c.h> +#include <linux/compiler.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* Declarations */ +extern omap3_sysinfo sysinfo; +static void omap3_setup_aux_cr(void); +#ifndef CONFIG_SYS_L2CACHE_OFF +static void omap3_invalidate_l2_cache_secure(void); +#endif + +static const struct gpio_bank gpio_bank_34xx[6] = { + { (void *)OMAP34XX_GPIO1_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP34XX_GPIO2_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP34XX_GPIO3_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP34XX_GPIO4_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP34XX_GPIO5_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP34XX_GPIO6_BASE, METHOD_GPIO_24XX }, +}; + +const struct gpio_bank *const omap_gpio_bank = gpio_bank_34xx; + +#ifdef CONFIG_SPL_BUILD +/* +* We use static variables because global data is not ready yet. +* Initialized data is available in SPL right from the beginning. +* We would not typically need to save these parameters in regular +* U-Boot. This is needed only in SPL at the moment. +*/ +u32 omap3_boot_device = BOOT_DEVICE_NAND; + +/* auto boot mode detection is not possible for OMAP3 - hard code */ +u32 spl_boot_mode(void) +{ + switch (spl_boot_device()) { + case BOOT_DEVICE_MMC2: + return MMCSD_MODE_RAW; + case BOOT_DEVICE_MMC1: + return MMCSD_MODE_FAT; + break; + default: + puts("spl: ERROR: unknown device - can't select boot mode\n"); + hang(); + } +} + +u32 spl_boot_device(void) +{ + return omap3_boot_device; +} + +int board_mmc_init(bd_t *bis) +{ + switch (spl_boot_device()) { + case BOOT_DEVICE_MMC1: + omap_mmc_init(0, 0, 0, -1, -1); + break; + case BOOT_DEVICE_MMC2: + case BOOT_DEVICE_MMC2_2: + omap_mmc_init(1, 0, 0, -1, -1); + break; + } + return 0; +} + +void spl_board_init(void) +{ +#if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT) + gpmc_init(); +#endif +#ifdef CONFIG_SPL_I2C_SUPPORT + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); +#endif +} +#endif /* CONFIG_SPL_BUILD */ + + +/****************************************************************************** + * Routine: secure_unlock + * Description: Setup security registers for access + * (GP Device only) + *****************************************************************************/ +void secure_unlock_mem(void) +{ + struct pm *pm_rt_ape_base = (struct pm *)PM_RT_APE_BASE_ADDR_ARM; + struct pm *pm_gpmc_base = (struct pm *)PM_GPMC_BASE_ADDR_ARM; + struct pm *pm_ocm_ram_base = (struct pm *)PM_OCM_RAM_BASE_ADDR_ARM; + struct pm *pm_iva2_base = (struct pm *)PM_IVA2_BASE_ADDR_ARM; + struct sms *sms_base = (struct sms *)OMAP34XX_SMS_BASE; + + /* Protection Module Register Target APE (PM_RT) */ + writel(UNLOCK_1, &pm_rt_ape_base->req_info_permission_1); + writel(UNLOCK_1, &pm_rt_ape_base->read_permission_0); + writel(UNLOCK_1, &pm_rt_ape_base->wirte_permission_0); + writel(UNLOCK_2, &pm_rt_ape_base->addr_match_1); + + writel(UNLOCK_3, &pm_gpmc_base->req_info_permission_0); + writel(UNLOCK_3, &pm_gpmc_base->read_permission_0); + writel(UNLOCK_3, &pm_gpmc_base->wirte_permission_0); + + writel(UNLOCK_3, &pm_ocm_ram_base->req_info_permission_0); + writel(UNLOCK_3, &pm_ocm_ram_base->read_permission_0); + writel(UNLOCK_3, &pm_ocm_ram_base->wirte_permission_0); + writel(UNLOCK_2, &pm_ocm_ram_base->addr_match_2); + + /* IVA Changes */ + writel(UNLOCK_3, &pm_iva2_base->req_info_permission_0); + writel(UNLOCK_3, &pm_iva2_base->read_permission_0); + writel(UNLOCK_3, &pm_iva2_base->wirte_permission_0); + + /* SDRC region 0 public */ + writel(UNLOCK_1, &sms_base->rg_att0); +} + +/****************************************************************************** + * Routine: secureworld_exit() + * Description: If chip is EMU and boot type is external + * configure secure registers and exit secure world + * general use. + *****************************************************************************/ +void secureworld_exit() +{ + unsigned long i; + + /* configure non-secure access control register */ + __asm__ __volatile__("mrc p15, 0, %0, c1, c1, 2":"=r"(i)); + /* enabling co-processor CP10 and CP11 accesses in NS world */ + __asm__ __volatile__("orr %0, %0, #0xC00":"=r"(i)); + /* + * allow allocation of locked TLBs and L2 lines in NS world + * allow use of PLE registers in NS world also + */ + __asm__ __volatile__("orr %0, %0, #0x70000":"=r"(i)); + __asm__ __volatile__("mcr p15, 0, %0, c1, c1, 2":"=r"(i)); + + /* Enable ASA in ACR register */ + __asm__ __volatile__("mrc p15, 0, %0, c1, c0, 1":"=r"(i)); + __asm__ __volatile__("orr %0, %0, #0x10":"=r"(i)); + __asm__ __volatile__("mcr p15, 0, %0, c1, c0, 1":"=r"(i)); + + /* Exiting secure world */ + __asm__ __volatile__("mrc p15, 0, %0, c1, c1, 0":"=r"(i)); + __asm__ __volatile__("orr %0, %0, #0x31":"=r"(i)); + __asm__ __volatile__("mcr p15, 0, %0, c1, c1, 0":"=r"(i)); +} + +/****************************************************************************** + * Routine: try_unlock_sram() + * Description: If chip is GP/EMU(special) type, unlock the SRAM for + * general use. + *****************************************************************************/ +void try_unlock_memory() +{ + int mode; + int in_sdram = is_running_in_sdram(); + + /* + * if GP device unlock device SRAM for general use + * secure code breaks for Secure/Emulation device - HS/E/T + */ + mode = get_device_type(); + if (mode == GP_DEVICE) + secure_unlock_mem(); + + /* + * If device is EMU and boot is XIP external booting + * Unlock firewalls and disable L2 and put chip + * out of secure world + * + * Assuming memories are unlocked by the demon who put us in SDRAM + */ + if ((mode <= EMU_DEVICE) && (get_boot_type() == 0x1F) + && (!in_sdram)) { + secure_unlock_mem(); + secureworld_exit(); + } + + return; +} + +/****************************************************************************** + * Routine: s_init + * Description: Does early system init of muxing and clocks. + * - Called path is with SRAM stack. + *****************************************************************************/ +void s_init(void) +{ + int in_sdram = is_running_in_sdram(); + + watchdog_init(); + + try_unlock_memory(); + + /* Errata workarounds */ + omap3_setup_aux_cr(); + +#ifndef CONFIG_SYS_L2CACHE_OFF + /* Invalidate L2-cache from secure mode */ + omap3_invalidate_l2_cache_secure(); +#endif + + set_muxconf_regs(); + sdelay(100); + + prcm_init(); + + per_clocks_enable(); + +#ifdef CONFIG_USB_EHCI_OMAP + ehci_clocks_enable(); +#endif + +#ifdef CONFIG_SPL_BUILD + gd = &gdata; + + preloader_console_init(); + + timer_init(); +#endif + + if (!in_sdram) + mem_init(); +} + +/* + * Routine: misc_init_r + * Description: A basic misc_init_r that just displays the die ID + */ +int __weak misc_init_r(void) +{ + dieid_num_r(); + + return 0; +} + +/****************************************************************************** + * Routine: wait_for_command_complete + * Description: Wait for posting to finish on watchdog + *****************************************************************************/ +void wait_for_command_complete(struct watchdog *wd_base) +{ + int pending = 1; + do { + pending = readl(&wd_base->wwps); + } while (pending); +} + +/****************************************************************************** + * Routine: watchdog_init + * Description: Shut down watch dogs + *****************************************************************************/ +void watchdog_init(void) +{ + struct watchdog *wd2_base = (struct watchdog *)WD2_BASE; + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + + /* + * There are 3 watch dogs WD1=Secure, WD2=MPU, WD3=IVA. WD1 is + * either taken care of by ROM (HS/EMU) or not accessible (GP). + * We need to take care of WD2-MPU or take a PRCM reset. WD3 + * should not be running and does not generate a PRCM reset. + */ + + sr32(&prcm_base->fclken_wkup, 5, 1, 1); + sr32(&prcm_base->iclken_wkup, 5, 1, 1); + wait_on_value(ST_WDT2, 0x20, &prcm_base->idlest_wkup, 5); + + writel(WD_UNLOCK1, &wd2_base->wspr); + wait_for_command_complete(wd2_base); + writel(WD_UNLOCK2, &wd2_base->wspr); +} + +/****************************************************************************** + * Dummy function to handle errors for EABI incompatibility + *****************************************************************************/ +void abort(void) +{ +} + +#if defined(CONFIG_NAND_OMAP_GPMC) & !defined(CONFIG_SPL_BUILD) +/****************************************************************************** + * OMAP3 specific command to switch between NAND HW and SW ecc + *****************************************************************************/ +static int do_switch_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) +{ + if (argc < 2 || argc > 3) + goto usage; + + if (strncmp(argv[1], "hw", 2) == 0) { + if (argc == 2) { + omap_nand_switch_ecc(1, 1); + } else { + if (strncmp(argv[2], "hamming", 7) == 0) + omap_nand_switch_ecc(1, 1); + else if (strncmp(argv[2], "bch8", 4) == 0) + omap_nand_switch_ecc(1, 8); + else + goto usage; + } + } else if (strncmp(argv[1], "sw", 2) == 0) { + omap_nand_switch_ecc(0, 0); + } else { + goto usage; + } + + return 0; + +usage: + printf ("Usage: nandecc %s\n", cmdtp->usage); + return 1; +} + +U_BOOT_CMD( + nandecc, 3, 1, do_switch_ecc, + "switch OMAP3 NAND ECC calculation algorithm", + "hw [hamming|bch8] - Switch between NAND hardware 1-bit hamming and" + " 8-bit BCH\n" + " ecc calculation (second parameter may" + " be omitted).\n" + "nandecc sw - Switch to NAND software ecc algorithm." +); + +#endif /* CONFIG_NAND_OMAP_GPMC & !CONFIG_SPL_BUILD */ + +#ifdef CONFIG_DISPLAY_BOARDINFO +/** + * Print board information + */ +int checkboard (void) +{ + char *mem_s ; + + if (is_mem_sdr()) + mem_s = "mSDR"; + else + mem_s = "LPDDR"; + + printf("%s + %s/%s\n", sysinfo.board_string, mem_s, + sysinfo.nand_string); + + return 0; +} +#endif /* CONFIG_DISPLAY_BOARDINFO */ + +static void omap3_emu_romcode_call(u32 service_id, u32 *parameters) +{ + u32 i, num_params = *parameters; + u32 *sram_scratch_space = (u32 *)OMAP3_PUBLIC_SRAM_SCRATCH_AREA; + + /* + * copy the parameters to an un-cached area to avoid coherency + * issues + */ + for (i = 0; i < num_params; i++) { + __raw_writel(*parameters, sram_scratch_space); + parameters++; + sram_scratch_space++; + } + + /* Now make the PPA call */ + do_omap3_emu_romcode_call(service_id, OMAP3_PUBLIC_SRAM_SCRATCH_AREA); +} + +static void omap3_update_aux_cr_secure(u32 set_bits, u32 clear_bits) +{ + u32 acr; + + /* Read ACR */ + asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr)); + acr &= ~clear_bits; + acr |= set_bits; + + if (get_device_type() == GP_DEVICE) { + omap3_gp_romcode_call(OMAP3_GP_ROMCODE_API_WRITE_ACR, + acr); + } else { + struct emu_hal_params emu_romcode_params; + emu_romcode_params.num_params = 1; + emu_romcode_params.param1 = acr; + omap3_emu_romcode_call(OMAP3_EMU_HAL_API_WRITE_ACR, + (u32 *)&emu_romcode_params); + } +} + +static void omap3_setup_aux_cr(void) +{ + /* Workaround for Cortex-A8 errata: #454179 #430973 + * Set "IBE" bit + * Set "Disable Branch Size Mispredicts" bit + * Workaround for erratum #621766 + * Enable L1NEON bit + * ACR |= (IBE | DBSM | L1NEON) => ACR |= 0xE0 + */ + omap3_update_aux_cr_secure(0xE0, 0); +} + +#ifndef CONFIG_SYS_L2CACHE_OFF +static void omap3_update_aux_cr(u32 set_bits, u32 clear_bits) +{ + u32 acr; + + /* Read ACR */ + asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr)); + acr &= ~clear_bits; + acr |= set_bits; + + /* Write ACR - affects non-secure banked bits */ + asm volatile ("mcr p15, 0, %0, c1, c0, 1" : : "r" (acr)); +} + +/* Invalidate the entire L2 cache from secure mode */ +static void omap3_invalidate_l2_cache_secure(void) +{ + if (get_device_type() == GP_DEVICE) { + omap3_gp_romcode_call(OMAP3_GP_ROMCODE_API_L2_INVAL, + 0); + } else { + struct emu_hal_params emu_romcode_params; + emu_romcode_params.num_params = 1; + emu_romcode_params.param1 = 0; + omap3_emu_romcode_call(OMAP3_EMU_HAL_API_L2_INVAL, + (u32 *)&emu_romcode_params); + } +} + +void v7_outer_cache_enable(void) +{ + /* Set L2EN */ + omap3_update_aux_cr_secure(0x2, 0); + + /* + * On some revisions L2EN bit is banked on some revisions it's not + * No harm in setting both banked bits(in fact this is required + * by an erratum) + */ + omap3_update_aux_cr(0x2, 0); +} + +void omap3_outer_cache_disable(void) +{ + /* Clear L2EN */ + omap3_update_aux_cr_secure(0, 0x2); + + /* + * On some revisions L2EN bit is banked on some revisions it's not + * No harm in clearing both banked bits(in fact this is required + * by an erratum) + */ + omap3_update_aux_cr(0, 0x2); +} +#endif /* !CONFIG_SYS_L2CACHE_OFF */ + +#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{ + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +} +#endif /* !CONFIG_SYS_DCACHE_OFF */ diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c new file mode 100644 index 0000000..81cc859 --- /dev/null +++ b/arch/arm/cpu/armv7/omap3/clock.c @@ -0,0 +1,734 @@ +/* + * (C) Copyright 2008 + * Texas Instruments, <www.ti.com> + * + * Author : + * Manikandan Pillai <mani.pillai@ti.com> + * + * Derived from Beagle Board and OMAP3 SDP code by + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/clocks_omap3.h> +#include <asm/arch/mem.h> +#include <asm/arch/sys_proto.h> +#include <environment.h> +#include <command.h> + +/****************************************************************************** + * get_sys_clk_speed() - determine reference oscillator speed + * based on known 32kHz clock and gptimer. + *****************************************************************************/ +u32 get_osc_clk_speed(void) +{ + u32 start, cstart, cend, cdiff, cdiv, val; + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + struct prm *prm_base = (struct prm *)PRM_BASE; + struct gptimer *gpt1_base = (struct gptimer *)OMAP34XX_GPT1; + struct s32ktimer *s32k_base = (struct s32ktimer *)SYNC_32KTIMER_BASE; + + val = readl(&prm_base->clksrc_ctrl); + + if (val & SYSCLKDIV_2) + cdiv = 2; + else + cdiv = 1; + + /* enable timer2 */ + val = readl(&prcm_base->clksel_wkup) | CLKSEL_GPT1; + + /* select sys_clk for GPT1 */ + writel(val, &prcm_base->clksel_wkup); + + /* Enable I and F Clocks for GPT1 */ + val = readl(&prcm_base->iclken_wkup) | EN_GPT1 | EN_32KSYNC; + writel(val, &prcm_base->iclken_wkup); + + val = readl(&prcm_base->fclken_wkup) | EN_GPT1; + writel(val, &prcm_base->fclken_wkup); + + writel(0, &gpt1_base->tldr); /* start counting at 0 */ + writel(GPT_EN, &gpt1_base->tclr); /* enable clock */ + + /* enable 32kHz source, determine sys_clk via gauging */ + + /* start time in 20 cycles */ + start = 20 + readl(&s32k_base->s32k_cr); + + /* dead loop till start time */ + while (readl(&s32k_base->s32k_cr) < start); + + /* get start sys_clk count */ + cstart = readl(&gpt1_base->tcrr); + + /* wait for 40 cycles */ + while (readl(&s32k_base->s32k_cr) < (start + 20)) ; + cend = readl(&gpt1_base->tcrr); /* get end sys_clk count */ + cdiff = cend - cstart; /* get elapsed ticks */ + cdiff *= cdiv; + + /* based on number of ticks assign speed */ + if (cdiff > 19000) + return S38_4M; + else if (cdiff > 15200) + return S26M; + else if (cdiff > 13000) + return S24M; + else if (cdiff > 9000) + return S19_2M; + else if (cdiff > 7600) + return S13M; + else + return S12M; +} + +/****************************************************************************** + * get_sys_clkin_sel() - returns the sys_clkin_sel field value based on + * input oscillator clock frequency. + *****************************************************************************/ +void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel) +{ + switch(osc_clk) { + case S38_4M: + *sys_clkin_sel = 4; + break; + case S26M: + *sys_clkin_sel = 3; + break; + case S19_2M: + *sys_clkin_sel = 2; + break; + case S13M: + *sys_clkin_sel = 1; + break; + case S12M: + default: + *sys_clkin_sel = 0; + } +} + +/* + * OMAP34XX/35XX specific functions + */ + +static void dpll3_init_34xx(u32 sil_index, u32 clk_index) +{ + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + dpll_param *ptr = (dpll_param *) get_core_dpll_param(); + void (*f_lock_pll) (u32, u32, u32, u32); + int xip_safe, p0, p1, p2, p3; + + xip_safe = is_running_in_sram(); + + /* Moving to the right sysclk and ES rev base */ + ptr = ptr + (3 * clk_index) + sil_index; + + if (xip_safe) { + /* + * CORE DPLL + * sr32(CM_CLKSEL2_EMU) set override to work when asleep + */ + sr32(&prcm_base->clken_pll, 0, 3, PLL_FAST_RELOCK_BYPASS); + wait_on_value(ST_CORE_CLK, 0, &prcm_base->idlest_ckgen, + LDELAY); + + /* + * For OMAP3 ES1.0 Errata 1.50, default value directly doesn't + * work. write another value and then default value. + */ + + /* CM_CLKSEL1_EMU[DIV_DPLL3] */ + sr32(&prcm_base->clksel1_emu, 16, 5, (CORE_M3X2 + 1)) ; + sr32(&prcm_base->clksel1_emu, 16, 5, CORE_M3X2); + + /* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */ + sr32(&prcm_base->clksel1_pll, 27, 5, ptr->m2); + + /* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */ + sr32(&prcm_base->clksel1_pll, 16, 11, ptr->m); + + /* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */ + sr32(&prcm_base->clksel1_pll, 8, 7, ptr->n); + + /* Source is the CM_96M_FCLK: CM_CLKSEL1_PLL[6] */ + sr32(&prcm_base->clksel1_pll, 6, 1, 0); + + /* SSI */ + sr32(&prcm_base->clksel_core, 8, 4, CORE_SSI_DIV); + /* FSUSB */ + sr32(&prcm_base->clksel_core, 4, 2, CORE_FUSB_DIV); + /* L4 */ + sr32(&prcm_base->clksel_core, 2, 2, CORE_L4_DIV); + /* L3 */ + sr32(&prcm_base->clksel_core, 0, 2, CORE_L3_DIV); + /* GFX */ + sr32(&prcm_base->clksel_gfx, 0, 3, GFX_DIV); + /* RESET MGR */ + sr32(&prcm_base->clksel_wkup, 1, 2, WKUP_RSM); + /* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */ + sr32(&prcm_base->clken_pll, 4, 4, ptr->fsel); + /* LOCK MODE */ + sr32(&prcm_base->clken_pll, 0, 3, PLL_LOCK); + + wait_on_value(ST_CORE_CLK, 1, &prcm_base->idlest_ckgen, + LDELAY); + } else if (is_running_in_flash()) { + /* + * if running from flash, jump to small relocated code + * area in SRAM. + */ + f_lock_pll = (void *) ((u32) &_end_vect - (u32) &_start + + SRAM_VECT_CODE); + + p0 = readl(&prcm_base->clken_pll); + sr32(&p0, 0, 3, PLL_FAST_RELOCK_BYPASS); + /* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */ + sr32(&p0, 4, 4, ptr->fsel); + + p1 = readl(&prcm_base->clksel1_pll); + /* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */ + sr32(&p1, 27, 5, ptr->m2); + /* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */ + sr32(&p1, 16, 11, ptr->m); + /* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */ + sr32(&p1, 8, 7, ptr->n); + /* Source is the CM_96M_FCLK: CM_CLKSEL1_PLL[6] */ + sr32(&p1, 6, 1, 0); + + p2 = readl(&prcm_base->clksel_core); + /* SSI */ + sr32(&p2, 8, 4, CORE_SSI_DIV); + /* FSUSB */ + sr32(&p2, 4, 2, CORE_FUSB_DIV); + /* L4 */ + sr32(&p2, 2, 2, CORE_L4_DIV); + /* L3 */ + sr32(&p2, 0, 2, CORE_L3_DIV); + + p3 = (u32)&prcm_base->idlest_ckgen; + + (*f_lock_pll) (p0, p1, p2, p3); + } +} + +static void dpll4_init_34xx(u32 sil_index, u32 clk_index) +{ + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + dpll_param *ptr = (dpll_param *) get_per_dpll_param(); + + /* Moving it to the right sysclk base */ + ptr = ptr + clk_index; + + /* EN_PERIPH_DPLL: CM_CLKEN_PLL[16:18] */ + sr32(&prcm_base->clken_pll, 16, 3, PLL_STOP); + wait_on_value(ST_PERIPH_CLK, 0, &prcm_base->idlest_ckgen, LDELAY); + + /* + * Errata 1.50 Workaround for OMAP3 ES1.0 only + * If using default divisors, write default divisor + 1 + * and then the actual divisor value + */ + /* M6 */ + sr32(&prcm_base->clksel1_emu, 24, 5, (PER_M6X2 + 1)); + sr32(&prcm_base->clksel1_emu, 24, 5, PER_M6X2); + /* M5 */ + sr32(&prcm_base->clksel_cam, 0, 5, (PER_M5X2 + 1)); + sr32(&prcm_base->clksel_cam, 0, 5, PER_M5X2); + /* M4 */ + sr32(&prcm_base->clksel_dss, 0, 5, (PER_M4X2 + 1)); + sr32(&prcm_base->clksel_dss, 0, 5, PER_M4X2); + /* M3 */ + sr32(&prcm_base->clksel_dss, 8, 5, (PER_M3X2 + 1)); + sr32(&prcm_base->clksel_dss, 8, 5, PER_M3X2); + /* M2 (DIV_96M): CM_CLKSEL3_PLL[0:4] */ + sr32(&prcm_base->clksel3_pll, 0, 5, (ptr->m2 + 1)); + sr32(&prcm_base->clksel3_pll, 0, 5, ptr->m2); + /* Workaround end */ + + /* M (PERIPH_DPLL_MULT): CM_CLKSEL2_PLL[8:18] */ + sr32(&prcm_base->clksel2_pll, 8, 11, ptr->m); + + /* N (PERIPH_DPLL_DIV): CM_CLKSEL2_PLL[0:6] */ + sr32(&prcm_base->clksel2_pll, 0, 7, ptr->n); + + /* FREQSEL (PERIPH_DPLL_FREQSEL): CM_CLKEN_PLL[20:23] */ + sr32(&prcm_base->clken_pll, 20, 4, ptr->fsel); + + /* LOCK MODE (EN_PERIPH_DPLL): CM_CLKEN_PLL[16:18] */ + sr32(&prcm_base->clken_pll, 16, 3, PLL_LOCK); + wait_on_value(ST_PERIPH_CLK, 2, &prcm_base->idlest_ckgen, LDELAY); +} + +static void dpll5_init_34xx(u32 sil_index, u32 clk_index) +{ + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + dpll_param *ptr = (dpll_param *) get_per2_dpll_param(); + + /* Moving it to the right sysclk base */ + ptr = ptr + clk_index; + + /* PER2 DPLL (DPLL5) */ + sr32(&prcm_base->clken2_pll, 0, 3, PLL_STOP); + wait_on_value(1, 0, &prcm_base->idlest2_ckgen, LDELAY); + sr32(&prcm_base->clksel5_pll, 0, 5, ptr->m2); /* set M2 (usbtll_fck) */ + sr32(&prcm_base->clksel4_pll, 8, 11, ptr->m); /* set m (11-bit multiplier) */ + sr32(&prcm_base->clksel4_pll, 0, 7, ptr->n); /* set n (7-bit divider)*/ + sr32(&prcm_base->clken_pll, 4, 4, ptr->fsel); /* FREQSEL */ + sr32(&prcm_base->clken2_pll, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(1, 1, &prcm_base->idlest2_ckgen, LDELAY); +} + +static void mpu_init_34xx(u32 sil_index, u32 clk_index) +{ + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + dpll_param *ptr = (dpll_param *) get_mpu_dpll_param(); + + /* Moving to the right sysclk and ES rev base */ + ptr = ptr + (3 * clk_index) + sil_index; + + /* MPU DPLL (unlocked already) */ + + /* M2 (MPU_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_MPU[0:4] */ + sr32(&prcm_base->clksel2_pll_mpu, 0, 5, ptr->m2); + + /* M (MPU_DPLL_MULT) : CM_CLKSEL2_PLL_MPU[8:18] */ + sr32(&prcm_base->clksel1_pll_mpu, 8, 11, ptr->m); + + /* N (MPU_DPLL_DIV) : CM_CLKSEL2_PLL_MPU[0:6] */ + sr32(&prcm_base->clksel1_pll_mpu, 0, 7, ptr->n); + + /* FREQSEL (MPU_DPLL_FREQSEL) : CM_CLKEN_PLL_MPU[4:7] */ + sr32(&prcm_base->clken_pll_mpu, 4, 4, ptr->fsel); +} + +static void iva_init_34xx(u32 sil_index, u32 clk_index) +{ + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + dpll_param *ptr = (dpll_param *) get_iva_dpll_param(); + + /* Moving to the right sysclk and ES rev base */ + ptr = ptr + (3 * clk_index) + sil_index; + + /* IVA DPLL */ + /* EN_IVA2_DPLL : CM_CLKEN_PLL_IVA2[0:2] */ + sr32(&prcm_base->clken_pll_iva2, 0, 3, PLL_STOP); + wait_on_value(ST_IVA2_CLK, 0, &prcm_base->idlest_pll_iva2, LDELAY); + + /* M2 (IVA2_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_IVA2[0:4] */ + sr32(&prcm_base->clksel2_pll_iva2, 0, 5, ptr->m2); + + /* M (IVA2_DPLL_MULT) : CM_CLKSEL1_PLL_IVA2[8:18] */ + sr32(&prcm_base->clksel1_pll_iva2, 8, 11, ptr->m); + + /* N (IVA2_DPLL_DIV) : CM_CLKSEL1_PLL_IVA2[0:6] */ + sr32(&prcm_base->clksel1_pll_iva2, 0, 7, ptr->n); + + /* FREQSEL (IVA2_DPLL_FREQSEL) : CM_CLKEN_PLL_IVA2[4:7] */ + sr32(&prcm_base->clken_pll_iva2, 4, 4, ptr->fsel); + + /* LOCK MODE (EN_IVA2_DPLL) : CM_CLKEN_PLL_IVA2[0:2] */ + sr32(&prcm_base->clken_pll_iva2, 0, 3, PLL_LOCK); + + wait_on_value(ST_IVA2_CLK, 1, &prcm_base->idlest_pll_iva2, LDELAY); +} + +/* + * OMAP3630 specific functions + */ + +static void dpll3_init_36xx(u32 sil_index, u32 clk_index) +{ + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + dpll_param *ptr = (dpll_param *) get_36x_core_dpll_param(); + void (*f_lock_pll) (u32, u32, u32, u32); + int xip_safe, p0, p1, p2, p3; + + xip_safe = is_running_in_sram(); + + /* Moving it to the right sysclk base */ + ptr += clk_index; + + if (xip_safe) { + /* CORE DPLL */ + + /* Select relock bypass: CM_CLKEN_PLL[0:2] */ + sr32(&prcm_base->clken_pll, 0, 3, PLL_FAST_RELOCK_BYPASS); + wait_on_value(ST_CORE_CLK, 0, &prcm_base->idlest_ckgen, + LDELAY); + + /* CM_CLKSEL1_EMU[DIV_DPLL3] */ + sr32(&prcm_base->clksel1_emu, 16, 5, CORE_M3X2); + + /* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */ + sr32(&prcm_base->clksel1_pll, 27, 5, ptr->m2); + + /* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */ + sr32(&prcm_base->clksel1_pll, 16, 11, ptr->m); + + /* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */ + sr32(&prcm_base->clksel1_pll, 8, 7, ptr->n); + + /* Source is the CM_96M_FCLK: CM_CLKSEL1_PLL[6] */ + sr32(&prcm_base->clksel1_pll, 6, 1, 0); + + /* SSI */ + sr32(&prcm_base->clksel_core, 8, 4, CORE_SSI_DIV); + /* FSUSB */ + sr32(&prcm_base->clksel_core, 4, 2, CORE_FUSB_DIV); + /* L4 */ + sr32(&prcm_base->clksel_core, 2, 2, CORE_L4_DIV); + /* L3 */ + sr32(&prcm_base->clksel_core, 0, 2, CORE_L3_DIV); + /* GFX */ + sr32(&prcm_base->clksel_gfx, 0, 3, GFX_DIV_36X); + /* RESET MGR */ + sr32(&prcm_base->clksel_wkup, 1, 2, WKUP_RSM); + /* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */ + sr32(&prcm_base->clken_pll, 4, 4, ptr->fsel); + /* LOCK MODE */ + sr32(&prcm_base->clken_pll, 0, 3, PLL_LOCK); + + wait_on_value(ST_CORE_CLK, 1, &prcm_base->idlest_ckgen, + LDELAY); + } else if (is_running_in_flash()) { + /* + * if running from flash, jump to small relocated code + * area in SRAM. + */ + f_lock_pll = (void *) ((u32) &_end_vect - (u32) &_start + + SRAM_VECT_CODE); + + p0 = readl(&prcm_base->clken_pll); + sr32(&p0, 0, 3, PLL_FAST_RELOCK_BYPASS); + /* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */ + sr32(&p0, 4, 4, ptr->fsel); + + p1 = readl(&prcm_base->clksel1_pll); + /* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */ + sr32(&p1, 27, 5, ptr->m2); + /* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */ + sr32(&p1, 16, 11, ptr->m); + /* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */ + sr32(&p1, 8, 7, ptr->n); + /* Source is the CM_96M_FCLK: CM_CLKSEL1_PLL[6] */ + sr32(&p1, 6, 1, 0); + + p2 = readl(&prcm_base->clksel_core); + /* SSI */ + sr32(&p2, 8, 4, CORE_SSI_DIV); + /* FSUSB */ + sr32(&p2, 4, 2, CORE_FUSB_DIV); + /* L4 */ + sr32(&p2, 2, 2, CORE_L4_DIV); + /* L3 */ + sr32(&p2, 0, 2, CORE_L3_DIV); + + p3 = (u32)&prcm_base->idlest_ckgen; + + (*f_lock_pll) (p0, p1, p2, p3); + } +} + +static void dpll4_init_36xx(u32 sil_index, u32 clk_index) +{ + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + struct dpll_per_36x_param *ptr; + + ptr = (struct dpll_per_36x_param *)get_36x_per_dpll_param(); + + /* Moving it to the right sysclk base */ + ptr += clk_index; + + /* EN_PERIPH_DPLL: CM_CLKEN_PLL[16:18] */ + sr32(&prcm_base->clken_pll, 16, 3, PLL_STOP); + wait_on_value(ST_PERIPH_CLK, 0, &prcm_base->idlest_ckgen, LDELAY); + + /* M6 (DIV_DPLL4): CM_CLKSEL1_EMU[24:29] */ + sr32(&prcm_base->clksel1_emu, 24, 6, ptr->m6); + + /* M5 (CLKSEL_CAM): CM_CLKSEL1_EMU[0:5] */ + sr32(&prcm_base->clksel_cam, 0, 6, ptr->m5); + + /* M4 (CLKSEL_DSS1): CM_CLKSEL_DSS[0:5] */ + sr32(&prcm_base->clksel_dss, 0, 6, ptr->m4); + + /* M3 (CLKSEL_DSS1): CM_CLKSEL_DSS[8:13] */ + sr32(&prcm_base->clksel_dss, 8, 6, ptr->m3); + + /* M2 (DIV_96M): CM_CLKSEL3_PLL[0:4] */ + sr32(&prcm_base->clksel3_pll, 0, 5, ptr->m2); + + /* M (PERIPH_DPLL_MULT): CM_CLKSEL2_PLL[8:19] */ + sr32(&prcm_base->clksel2_pll, 8, 12, ptr->m); + + /* N (PERIPH_DPLL_DIV): CM_CLKSEL2_PLL[0:6] */ + sr32(&prcm_base->clksel2_pll, 0, 7, ptr->n); + + /* M2DIV (CLKSEL_96M): CM_CLKSEL_CORE[12:13] */ + sr32(&prcm_base->clksel_core, 12, 2, ptr->m2div); + + /* LOCK MODE (EN_PERIPH_DPLL): CM_CLKEN_PLL[16:18] */ + sr32(&prcm_base->clken_pll, 16, 3, PLL_LOCK); + wait_on_value(ST_PERIPH_CLK, 2, &prcm_base->idlest_ckgen, LDELAY); +} + +static void mpu_init_36xx(u32 sil_index, u32 clk_index) +{ + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + dpll_param *ptr = (dpll_param *) get_36x_mpu_dpll_param(); + + /* Moving to the right sysclk */ + ptr += clk_index; + + /* MPU DPLL (unlocked already */ + + /* M2 (MPU_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_MPU[0:4] */ + sr32(&prcm_base->clksel2_pll_mpu, 0, 5, ptr->m2); + + /* M (MPU_DPLL_MULT) : CM_CLKSEL2_PLL_MPU[8:18] */ + sr32(&prcm_base->clksel1_pll_mpu, 8, 11, ptr->m); + + /* N (MPU_DPLL_DIV) : CM_CLKSEL2_PLL_MPU[0:6] */ + sr32(&prcm_base->clksel1_pll_mpu, 0, 7, ptr->n); +} + +static void iva_init_36xx(u32 sil_index, u32 clk_index) +{ + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + dpll_param *ptr = (dpll_param *)get_36x_iva_dpll_param(); + + /* Moving to the right sysclk */ + ptr += clk_index; + + /* IVA DPLL */ + /* EN_IVA2_DPLL : CM_CLKEN_PLL_IVA2[0:2] */ + sr32(&prcm_base->clken_pll_iva2, 0, 3, PLL_STOP); + wait_on_value(ST_IVA2_CLK, 0, &prcm_base->idlest_pll_iva2, LDELAY); + + /* M2 (IVA2_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_IVA2[0:4] */ + sr32(&prcm_base->clksel2_pll_iva2, 0, 5, ptr->m2); + + /* M (IVA2_DPLL_MULT) : CM_CLKSEL1_PLL_IVA2[8:18] */ + sr32(&prcm_base->clksel1_pll_iva2, 8, 11, ptr->m); + + /* N (IVA2_DPLL_DIV) : CM_CLKSEL1_PLL_IVA2[0:6] */ + sr32(&prcm_base->clksel1_pll_iva2, 0, 7, ptr->n); + + /* LOCK (MODE (EN_IVA2_DPLL) : CM_CLKEN_PLL_IVA2[0:2] */ + sr32(&prcm_base->clken_pll_iva2, 0, 3, PLL_LOCK); + + wait_on_value(ST_IVA2_CLK, 1, &prcm_base->idlest_pll_iva2, LDELAY); +} + +/****************************************************************************** + * prcm_init() - inits clocks for PRCM as defined in clocks.h + * called from SRAM, or Flash (using temp SRAM stack). + *****************************************************************************/ +void prcm_init(void) +{ + u32 osc_clk = 0, sys_clkin_sel; + u32 clk_index, sil_index = 0; + struct prm *prm_base = (struct prm *)PRM_BASE; + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + + /* + * Gauge the input clock speed and find out the sys_clkin_sel + * value corresponding to the input clock. + */ + osc_clk = get_osc_clk_speed(); + get_sys_clkin_sel(osc_clk, &sys_clkin_sel); + + /* set input crystal speed */ + sr32(&prm_base->clksel, 0, 3, sys_clkin_sel); + + /* If the input clock is greater than 19.2M always divide/2 */ + if (sys_clkin_sel > 2) { + /* input clock divider */ + sr32(&prm_base->clksrc_ctrl, 6, 2, 2); + clk_index = sys_clkin_sel / 2; + } else { + /* input clock divider */ + sr32(&prm_base->clksrc_ctrl, 6, 2, 1); + clk_index = sys_clkin_sel; + } + + if (get_cpu_family() == CPU_OMAP36XX) { + /* + * In warm reset conditions on OMAP36xx/AM/DM37xx + * the rom code incorrectly sets the DPLL4 clock + * input divider to /6.5. Section 3.5.3.3.3.2.1 of + * the AM/DM37x TRM explains that the /6.5 divider + * is used only when the input clock is 13MHz. + * + * If the part is in this cpu family *and* the input + * clock *is not* 13 MHz, then reset the DPLL4 clock + * input divider to /1 as it should never set to /6.5 + * in this case. + */ + if (sys_clkin_sel != 1) /* 13 MHz */ + /* Bit 8: DPLL4_CLKINP_DIV */ + sr32(&prm_base->clksrc_ctrl, 8, 1, 0); + + /* Unlock MPU DPLL (slows things down, and needed later) */ + sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOW_POWER_BYPASS); + wait_on_value(ST_MPU_CLK, 0, &prcm_base->idlest_pll_mpu, + LDELAY); + + dpll3_init_36xx(0, clk_index); + dpll4_init_36xx(0, clk_index); + dpll5_init_34xx(0, clk_index); + iva_init_36xx(0, clk_index); + mpu_init_36xx(0, clk_index); + + /* Lock MPU DPLL to set frequency */ + sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOCK); + wait_on_value(ST_MPU_CLK, 1, &prcm_base->idlest_pll_mpu, + LDELAY); + } else { + /* + * The DPLL tables are defined according to sysclk value and + * silicon revision. The clk_index value will be used to get + * the values for that input sysclk from the DPLL param table + * and sil_index will get the values for that SysClk for the + * appropriate silicon rev. + */ + if (((get_cpu_family() == CPU_OMAP34XX) + && (get_cpu_rev() >= CPU_3XX_ES20)) || + (get_cpu_family() == CPU_AM35XX)) + sil_index = 1; + + /* Unlock MPU DPLL (slows things down, and needed later) */ + sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOW_POWER_BYPASS); + wait_on_value(ST_MPU_CLK, 0, &prcm_base->idlest_pll_mpu, + LDELAY); + + dpll3_init_34xx(sil_index, clk_index); + dpll4_init_34xx(sil_index, clk_index); + dpll5_init_34xx(sil_index, clk_index); + if (get_cpu_family() != CPU_AM35XX) + iva_init_34xx(sil_index, clk_index); + + mpu_init_34xx(sil_index, clk_index); + + /* Lock MPU DPLL to set frequency */ + sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOCK); + wait_on_value(ST_MPU_CLK, 1, &prcm_base->idlest_pll_mpu, + LDELAY); + } + + /* Set up GPTimers to sys_clk source only */ + sr32(&prcm_base->clksel_per, 0, 8, 0xff); + sr32(&prcm_base->clksel_wkup, 0, 1, 1); + + sdelay(5000); +} + +/* + * Enable usb ehci uhh, tll clocks + */ +void ehci_clocks_enable(void) +{ + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + + /* Enable USBHOST_L3_ICLK (USBHOST_MICLK) */ + sr32(&prcm_base->iclken_usbhost, 0, 1, 1); + /* + * Enable USBHOST_48M_FCLK (USBHOST_FCLK1) + * and USBHOST_120M_FCLK (USBHOST_FCLK2) + */ + sr32(&prcm_base->fclken_usbhost, 0, 2, 3); + /* Enable USBTTL_ICLK */ + sr32(&prcm_base->iclken3_core, 2, 1, 1); + /* Enable USBTTL_FCLK */ + sr32(&prcm_base->fclken3_core, 2, 1, 1); +} + +/****************************************************************************** + * peripheral_enable() - Enable the clks & power for perifs (GPT2, UART1,...) + *****************************************************************************/ +void per_clocks_enable(void) +{ + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + + /* Enable GP2 timer. */ + sr32(&prcm_base->clksel_per, 0, 1, 0x1); /* GPT2 = sys clk */ + sr32(&prcm_base->iclken_per, 3, 1, 0x1); /* ICKen GPT2 */ + sr32(&prcm_base->fclken_per, 3, 1, 0x1); /* FCKen GPT2 */ + +#ifdef CONFIG_SYS_NS16550 + /* Enable UART1 clocks */ + sr32(&prcm_base->fclken1_core, 13, 1, 0x1); + sr32(&prcm_base->iclken1_core, 13, 1, 0x1); + + /* UART 3 Clocks */ + sr32(&prcm_base->fclken_per, 11, 1, 0x1); + sr32(&prcm_base->iclken_per, 11, 1, 0x1); +#endif + +#ifdef CONFIG_OMAP3_GPIO_2 + sr32(&prcm_base->fclken_per, 13, 1, 1); + sr32(&prcm_base->iclken_per, 13, 1, 1); +#endif +#ifdef CONFIG_OMAP3_GPIO_3 + sr32(&prcm_base->fclken_per, 14, 1, 1); + sr32(&prcm_base->iclken_per, 14, 1, 1); +#endif +#ifdef CONFIG_OMAP3_GPIO_4 + sr32(&prcm_base->fclken_per, 15, 1, 1); + sr32(&prcm_base->iclken_per, 15, 1, 1); +#endif +#ifdef CONFIG_OMAP3_GPIO_5 + sr32(&prcm_base->fclken_per, 16, 1, 1); + sr32(&prcm_base->iclken_per, 16, 1, 1); +#endif +#ifdef CONFIG_OMAP3_GPIO_6 + sr32(&prcm_base->fclken_per, 17, 1, 1); + sr32(&prcm_base->iclken_per, 17, 1, 1); +#endif + +#ifdef CONFIG_DRIVER_OMAP34XX_I2C + /* Turn on all 3 I2C clocks */ + sr32(&prcm_base->fclken1_core, 15, 3, 0x7); + sr32(&prcm_base->iclken1_core, 15, 3, 0x7); /* I2C1,2,3 = on */ +#endif + /* Enable the ICLK for 32K Sync Timer as its used in udelay */ + sr32(&prcm_base->iclken_wkup, 2, 1, 0x1); + + if (get_cpu_family() != CPU_AM35XX) + sr32(&prcm_base->fclken_iva2, 0, 32, FCK_IVA2_ON); + + sr32(&prcm_base->fclken1_core, 0, 32, FCK_CORE1_ON); + sr32(&prcm_base->iclken1_core, 0, 32, ICK_CORE1_ON); + sr32(&prcm_base->iclken2_core, 0, 32, ICK_CORE2_ON); + sr32(&prcm_base->fclken_wkup, 0, 32, FCK_WKUP_ON); + sr32(&prcm_base->iclken_wkup, 0, 32, ICK_WKUP_ON); + sr32(&prcm_base->fclken_dss, 0, 32, FCK_DSS_ON); + sr32(&prcm_base->iclken_dss, 0, 32, ICK_DSS_ON); + if (get_cpu_family() != CPU_AM35XX) { + sr32(&prcm_base->fclken_cam, 0, 32, FCK_CAM_ON); + sr32(&prcm_base->iclken_cam, 0, 32, ICK_CAM_ON); + } + sr32(&prcm_base->fclken_per, 0, 32, FCK_PER_ON); + sr32(&prcm_base->iclken_per, 0, 32, ICK_PER_ON); + + sdelay(1000); +} diff --git a/arch/arm/cpu/armv7/omap3/config.mk b/arch/arm/cpu/armv7/omap3/config.mk new file mode 100644 index 0000000..b34fa64 --- /dev/null +++ b/arch/arm/cpu/armv7/omap3/config.mk @@ -0,0 +1,30 @@ +# +# Copyright 2011 Linaro Limited +# See file CREDITS for list of people who contributed to this +# project. +# +# (C) Copyright 2010 +# Texas Instruments, <www.ti.com> +# +# Aneesh V <aneesh@ti.com> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +ifdef CONFIG_SPL_BUILD +ALL-y += $(OBJTREE)/MLO +else +ALL-y += $(obj)u-boot.img +endif diff --git a/arch/arm/cpu/armv7/omap3/emac.c b/arch/arm/cpu/armv7/omap3/emac.c new file mode 100644 index 0000000..14667f1 --- /dev/null +++ b/arch/arm/cpu/armv7/omap3/emac.c @@ -0,0 +1,44 @@ +/* + * + * DaVinci EMAC initialization. + * + * (C) Copyright 2011, Ilya Yanok, Emcraft Systems + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include <common.h> +#include <netdev.h> +#include <asm/io.h> +#include <asm/arch/am35x_def.h> + +/* + * Initializes on-chip ethernet controllers. + * to override, implement board_eth_init() + */ +int cpu_eth_init(bd_t *bis) +{ + u32 reset; + + /* ensure that the module is out of reset */ + reset = readl(&am35x_scm_general_regs->ip_sw_reset); + reset &= ~CPGMACSS_SW_RST; + writel(reset, &am35x_scm_general_regs->ip_sw_reset); + + return davinci_emac_initialize(); +} diff --git a/arch/arm/cpu/armv7/omap3/emif4.c b/arch/arm/cpu/armv7/omap3/emif4.c new file mode 100644 index 0000000..3085637 --- /dev/null +++ b/arch/arm/cpu/armv7/omap3/emif4.c @@ -0,0 +1,178 @@ +/* + * Author : + * Vaibhav Hiremath <hvaibhav@ti.com> + * + * Based on mem.c and sdrc.c + * + * Copyright (C) 2010 + * Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mem.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/emif4.h> + +DECLARE_GLOBAL_DATA_PTR; +extern omap3_sysinfo sysinfo; + +static emif4_t *emif4_base = (emif4_t *)OMAP34XX_SDRC_BASE; + +/* + * is_mem_sdr - + * - Return 1 if mem type in use is SDR + */ +u32 is_mem_sdr(void) +{ + return 0; +} + +/* + * get_sdr_cs_size - + * - Get size of chip select 0/1 + */ +u32 get_sdr_cs_size(u32 cs) +{ + u32 size = 0; + + /* TODO: Calculate the size based on EMIF4 configuration */ + if (cs == CS0) + size = CONFIG_SYS_CS0_SIZE; + + return size; +} + +/* + * get_sdr_cs_offset - + * - Get offset of cs from cs0 start + */ +u32 get_sdr_cs_offset(u32 cs) +{ + u32 offset = 0; + + return offset; +} + +/* + * do_emif4_init - + * - Init the emif4 module for DDR access + * - Early init routines, called from flash or SRAM. + */ +void do_emif4_init(void) +{ + unsigned int regval; + /* Set the DDR PHY parameters in PHY ctrl registers */ + regval = (EMIF4_DDR1_READ_LAT | EMIF4_DDR1_PWRDN_DIS | + EMIF4_DDR1_EXT_STRB_DIS); + writel(regval, &emif4_base->ddr_phyctrl1); + writel(regval, &emif4_base->ddr_phyctrl1_shdw); + writel(0, &emif4_base->ddr_phyctrl2); + + /* Reset the DDR PHY and wait till completed */ + regval = readl(&emif4_base->sdram_iodft_tlgc); + regval |= (1<<10); + writel(regval, &emif4_base->sdram_iodft_tlgc); + /*Wait till that bit clears*/ + while ((readl(&emif4_base->sdram_iodft_tlgc) & (1<<10)) == 0x1); + /*Re-verify the DDR PHY status*/ + while ((readl(&emif4_base->sdram_sts) & (1<<2)) == 0x0); + + regval |= (1<<0); + writel(regval, &emif4_base->sdram_iodft_tlgc); + /* Set SDR timing registers */ + regval = (EMIF4_TIM1_T_WTR | EMIF4_TIM1_T_RRD | + EMIF4_TIM1_T_RC | EMIF4_TIM1_T_RAS | + EMIF4_TIM1_T_WR | EMIF4_TIM1_T_RCD | + EMIF4_TIM1_T_RP); + writel(regval, &emif4_base->sdram_time1); + writel(regval, &emif4_base->sdram_time1_shdw); + + regval = (EMIF4_TIM2_T_CKE | EMIF4_TIM2_T_RTP | + EMIF4_TIM2_T_XSRD | EMIF4_TIM2_T_XSNR | + EMIF4_TIM2_T_ODT | EMIF4_TIM2_T_XP); + writel(regval, &emif4_base->sdram_time2); + writel(regval, &emif4_base->sdram_time2_shdw); + + regval = (EMIF4_TIM3_T_RAS_MAX | EMIF4_TIM3_T_RFC); + writel(regval, &emif4_base->sdram_time3); + writel(regval, &emif4_base->sdram_time3_shdw); + + /* Set the PWR control register */ + regval = (EMIF4_PWR_PM_TIM | EMIF4_PWR_LP_MODE | + EMIF4_PWR_DPD_DIS | EMIF4_PWR_IDLE_MODE); + writel(regval, &emif4_base->sdram_pwr_mgmt); + writel(regval, &emif4_base->sdram_pwr_mgmt_shdw); + + /* Set the DDR refresh rate control register */ + regval = (EMIF4_REFRESH_RATE | EMIF4_INITREF_DIS); + writel(regval, &emif4_base->sdram_refresh_ctrl); + writel(regval, &emif4_base->sdram_refresh_ctrl_shdw); + + /* set the SDRAM configuration register */ + regval = (EMIF4_CFG_PGSIZE | EMIF4_CFG_EBANK | + EMIF4_CFG_IBANK | EMIF4_CFG_ROWSIZE | + EMIF4_CFG_CL | EMIF4_CFG_NARROW_MD | + EMIF4_CFG_SDR_DRV | EMIF4_CFG_DDR_DIS_DLL | + EMIF4_CFG_DDR2_DDQS | EMIF4_CFG_DDR_TERM | + EMIF4_CFG_IBANK_POS | EMIF4_CFG_SDRAM_TYP); + writel(regval, &emif4_base->sdram_config); +} + +/* + * dram_init - + * - Sets uboots idea of sdram size + */ +int dram_init(void) +{ + unsigned int size0 = 0, size1 = 0; + + size0 = get_sdr_cs_size(CS0); + /* + * If a second bank of DDR is attached to CS1 this is + * where it can be started. Early init code will init + * memory on CS0. + */ + if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED)) + size1 = get_sdr_cs_size(CS1); + + gd->ram_size = size0 + size1; + return 0; +} + +void dram_init_banksize (void) +{ + unsigned int size0 = 0, size1 = 0; + + size0 = get_sdr_cs_size(CS0); + size1 = get_sdr_cs_size(CS1); + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = size0; + gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1); + gd->bd->bi_dram[1].size = size1; +} + +/* + * mem_init() - + * - Initialize memory subsystem + */ +void mem_init(void) +{ + do_emif4_init(); +} diff --git a/arch/arm/cpu/armv7/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S new file mode 100644 index 0000000..eacfef8 --- /dev/null +++ b/arch/arm/cpu/armv7/omap3/lowlevel_init.S @@ -0,0 +1,501 @@ +/* + * Board specific setup info + * + * (C) Copyright 2008 + * Texas Instruments, <www.ti.com> + * + * Initial Code by: + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include <asm/arch/mem.h> +#include <asm/arch/clocks_omap3.h> +#include <linux/linkage.h> + +_TEXT_BASE: + .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */ + +#ifdef CONFIG_SPL_BUILD +ENTRY(save_boot_params) + ldr r4, =omap3_boot_device + ldr r5, [r0, #0x4] + and r5, r5, #0xff + str r5, [r4] + bx lr +ENDPROC(save_boot_params) +#endif + +ENTRY(omap3_gp_romcode_call) + PUSH {r4-r12, lr} @ Save all registers from ROM code! + MOV r12, r0 @ Copy the Service ID in R12 + MOV r0, r1 @ Copy parameter to R0 + mcr p15, 0, r0, c7, c10, 4 @ DSB + mcr p15, 0, r0, c7, c10, 5 @ DMB + .word 0xe1600070 @ SMC #0 to enter monitor - hand assembled + @ because we use -march=armv5 + POP {r4-r12, pc} +ENDPROC(omap3_gp_romcode_call) + +/* + * Funtion for making PPA HAL API calls in secure devices + * Input: + * R0 - Service ID + * R1 - paramer list + */ +ENTRY(do_omap3_emu_romcode_call) + PUSH {r4-r12, lr} @ Save all registers from ROM code! + MOV r12, r0 @ Copy the Secure Service ID in R12 + MOV r3, r1 @ Copy the pointer to va_list in R3 + MOV r1, #0 @ Process ID - 0 + MOV r2, #OMAP3_EMU_HAL_START_HAL_CRITICAL @ Copy the pointer + @ to va_list in R3 + MOV r6, #0xFF @ Indicate new Task call + mcr p15, 0, r0, c7, c10, 4 @ DSB + mcr p15, 0, r0, c7, c10, 5 @ DMB + .word 0xe1600071 @ SMC #1 to call PPA service - hand assembled + @ because we use -march=armv5 + POP {r4-r12, pc} +ENDPROC(do_omap3_emu_romcode_call) + +#if !defined(CONFIG_SYS_NAND_BOOT) && !defined(CONFIG_SYS_NAND_BOOT) +/************************************************************************** + * cpy_clk_code: relocates clock code into SRAM where its safer to execute + * R1 = SRAM destination address. + *************************************************************************/ +ENTRY(cpy_clk_code) + /* Copy DPLL code into SRAM */ + adr r0, go_to_speed /* get addr of clock setting code */ + mov r2, #384 /* r2 size to copy (div by 32 bytes) */ + mov r1, r1 /* r1 <- dest address (passed in) */ + add r2, r2, r0 /* r2 <- source end address */ +next2: + ldmia r0!, {r3 - r10} /* copy from source address [r0] */ + stmia r1!, {r3 - r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end address [r2] */ + bne next2 + mov pc, lr /* back to caller */ +ENDPROC(cpy_clk_code) + +/* *************************************************************************** + * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed + * -executed from SRAM. + * R0 = CM_CLKEN_PLL-bypass value + * R1 = CM_CLKSEL1_PLL-m, n, and divider values + * R2 = CM_CLKSEL_CORE-divider values + * R3 = CM_IDLEST_CKGEN - addr dpll lock wait + * + * Note: If core unlocks/relocks and SDRAM is running fast already it gets + * confused. A reset of the controller gets it back. Taking away its + * L3 when its not in self refresh seems bad for it. Normally, this + * code runs from flash before SDR is init so that should be ok. + ****************************************************************************/ +ENTRY(go_to_speed) + stmfd sp!, {r4 - r6} + + /* move into fast relock bypass */ + ldr r4, pll_ctl_add + str r0, [r4] +wait1: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + beq wait1 /* if lock, loop */ + + /* set new dpll dividers _after_ in bypass */ + ldr r5, pll_div_add1 + str r1, [r5] /* set m, n, m2 */ + ldr r5, pll_div_add2 + str r2, [r5] /* set l3/l4/.. dividers*/ + ldr r5, pll_div_add3 /* wkup */ + ldr r2, pll_div_val3 /* rsm val */ + str r2, [r5] + ldr r5, pll_div_add4 /* gfx */ + ldr r2, pll_div_val4 + str r2, [r5] + ldr r5, pll_div_add5 /* emu */ + ldr r2, pll_div_val5 + str r2, [r5] + + /* now prepare GPMC (flash) for new dpll speed */ + /* flash needs to be stable when we jump back to it */ + ldr r5, flash_cfg3_addr + ldr r2, flash_cfg3_val + str r2, [r5] + ldr r5, flash_cfg4_addr + ldr r2, flash_cfg4_val + str r2, [r5] + ldr r5, flash_cfg5_addr + ldr r2, flash_cfg5_val + str r2, [r5] + ldr r5, flash_cfg1_addr + ldr r2, [r5] + orr r2, r2, #0x3 /* up gpmc divider */ + str r2, [r5] + + /* lock DPLL3 and wait a bit */ + orr r0, r0, #0x7 /* set up for lock mode */ + str r0, [r4] /* lock */ + nop /* ARM slow at this point working at sys_clk */ + nop + nop + nop +wait2: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + bne wait2 /* if lock, loop */ + nop + nop + nop + nop + ldmfd sp!, {r4 - r6} + mov pc, lr /* back to caller, locked */ +ENDPROC(go_to_speed) + +_go_to_speed: .word go_to_speed + +/* these constants need to be close for PIC code */ +/* The Nor has to be in the Flash Base CS0 for this condition to happen */ +flash_cfg1_addr: + .word (GPMC_CONFIG_CS0_BASE + GPMC_CONFIG1) +flash_cfg3_addr: + .word (GPMC_CONFIG_CS0_BASE + GPMC_CONFIG3) +flash_cfg3_val: + .word STNOR_GPMC_CONFIG3 +flash_cfg4_addr: + .word (GPMC_CONFIG_CS0_BASE + GPMC_CONFIG4) +flash_cfg4_val: + .word STNOR_GPMC_CONFIG4 +flash_cfg5_val: + .word STNOR_GPMC_CONFIG5 +flash_cfg5_addr: + .word (GPMC_CONFIG_CS0_BASE + GPMC_CONFIG5) +pll_ctl_add: + .word CM_CLKEN_PLL +pll_div_add1: + .word CM_CLKSEL1_PLL +pll_div_add2: + .word CM_CLKSEL_CORE +pll_div_add3: + .word CM_CLKSEL_WKUP +pll_div_val3: + .word (WKUP_RSM << 1) +pll_div_add4: + .word CM_CLKSEL_GFX +pll_div_val4: + .word (GFX_DIV << 0) +pll_div_add5: + .word CM_CLKSEL1_EMU +pll_div_val5: + .word CLSEL1_EMU_VAL + +#endif + +ENTRY(lowlevel_init) + ldr sp, SRAM_STACK + str ip, [sp] /* stash ip register */ + mov ip, lr /* save link reg across call */ +#if !defined(CONFIG_SYS_NAND_BOOT) && !defined(CONFIG_SYS_ONENAND_BOOT) +/* + * No need to copy/exec the clock code - DPLL adjust already done + * in NAND/oneNAND Boot. + */ + ldr r1, =SRAM_CLK_CODE + bl cpy_clk_code +#endif /* NAND Boot */ + mov lr, ip /* restore link reg */ + ldr ip, [sp] /* restore save ip */ + /* tail-call s_init to setup pll, mux, memory */ + b s_init + +ENDPROC(lowlevel_init) + + /* the literal pools origin */ + .ltorg + +REG_CONTROL_STATUS: + .word CONTROL_STATUS +SRAM_STACK: + .word LOW_LEVEL_SRAM_STACK + +/* DPLL(1-4) PARAM TABLES */ + +/* + * Each of the tables has M, N, FREQSEL, M2 values defined for nominal + * OPP (1.2V). The fields are defined according to dpll_param struct (clock.c). + * The values are defined for all possible sysclk and for ES1 and ES2. + */ + +mpu_dpll_param: +/* 12MHz */ +/* ES1 */ +.word MPU_M_12_ES1, MPU_N_12_ES1, MPU_FSEL_12_ES1, MPU_M2_12_ES1 +/* ES2 */ +.word MPU_M_12_ES2, MPU_N_12_ES2, MPU_FSEL_12_ES2, MPU_M2_ES2 +/* 3410 */ +.word MPU_M_12, MPU_N_12, MPU_FSEL_12, MPU_M2_12 + +/* 13MHz */ +/* ES1 */ +.word MPU_M_13_ES1, MPU_N_13_ES1, MPU_FSEL_13_ES1, MPU_M2_13_ES1 +/* ES2 */ +.word MPU_M_13_ES2, MPU_N_13_ES2, MPU_FSEL_13_ES2, MPU_M2_13_ES2 +/* 3410 */ +.word MPU_M_13, MPU_N_13, MPU_FSEL_13, MPU_M2_13 + +/* 19.2MHz */ +/* ES1 */ +.word MPU_M_19P2_ES1, MPU_N_19P2_ES1, MPU_FSEL_19P2_ES1, MPU_M2_19P2_ES1 +/* ES2 */ +.word MPU_M_19P2_ES2, MPU_N_19P2_ES2, MPU_FSEL_19P2_ES2, MPU_M2_19P2_ES2 +/* 3410 */ +.word MPU_M_19P2, MPU_N_19P2, MPU_FSEL_19P2, MPU_M2_19P2 + +/* 26MHz */ +/* ES1 */ +.word MPU_M_26_ES1, MPU_N_26_ES1, MPU_FSEL_26_ES1, MPU_M2_26_ES1 +/* ES2 */ +.word MPU_M_26_ES2, MPU_N_26_ES2, MPU_FSEL_26_ES2, MPU_M2_26_ES2 +/* 3410 */ +.word MPU_M_26, MPU_N_26, MPU_FSEL_26, MPU_M2_26 + +/* 38.4MHz */ +/* ES1 */ +.word MPU_M_38P4_ES1, MPU_N_38P4_ES1, MPU_FSEL_38P4_ES1, MPU_M2_38P4_ES1 +/* ES2 */ +.word MPU_M_38P4_ES2, MPU_N_38P4_ES2, MPU_FSEL_38P4_ES2, MPU_M2_38P4_ES2 +/* 3410 */ +.word MPU_M_38P4, MPU_N_38P4, MPU_FSEL_38P4, MPU_M2_38P4 + + +.globl get_mpu_dpll_param +get_mpu_dpll_param: + adr r0, mpu_dpll_param + mov pc, lr + +iva_dpll_param: +/* 12MHz */ +/* ES1 */ +.word IVA_M_12_ES1, IVA_N_12_ES1, IVA_FSEL_12_ES1, IVA_M2_12_ES1 +/* ES2 */ +.word IVA_M_12_ES2, IVA_N_12_ES2, IVA_FSEL_12_ES2, IVA_M2_12_ES2 +/* 3410 */ +.word IVA_M_12, IVA_N_12, IVA_FSEL_12, IVA_M2_12 + +/* 13MHz */ +/* ES1 */ +.word IVA_M_13_ES1, IVA_N_13_ES1, IVA_FSEL_13_ES1, IVA_M2_13_ES1 +/* ES2 */ +.word IVA_M_13_ES2, IVA_N_13_ES2, IVA_FSEL_13_ES2, IVA_M2_13_ES2 +/* 3410 */ +.word IVA_M_13, IVA_N_13, IVA_FSEL_13, IVA_M2_13 + +/* 19.2MHz */ +/* ES1 */ +.word IVA_M_19P2_ES1, IVA_N_19P2_ES1, IVA_FSEL_19P2_ES1, IVA_M2_19P2_ES1 +/* ES2 */ +.word IVA_M_19P2_ES2, IVA_N_19P2_ES2, IVA_FSEL_19P2_ES2, IVA_M2_19P2_ES2 +/* 3410 */ +.word IVA_M_19P2, IVA_N_19P2, IVA_FSEL_19P2, IVA_M2_19P2 + +/* 26MHz */ +/* ES1 */ +.word IVA_M_26_ES1, IVA_N_26_ES1, IVA_FSEL_26_ES1, IVA_M2_26_ES1 +/* ES2 */ +.word IVA_M_26_ES2, IVA_N_26_ES2, IVA_FSEL_26_ES2, IVA_M2_26_ES2 +/* 3410 */ +.word IVA_M_26, IVA_N_26, IVA_FSEL_26, IVA_M2_26 + +/* 38.4MHz */ +/* ES1 */ +.word IVA_M_38P4_ES1, IVA_N_38P4_ES1, IVA_FSEL_38P4_ES1, IVA_M2_38P4_ES1 +/* ES2 */ +.word IVA_M_38P4_ES2, IVA_N_38P4_ES2, IVA_FSEL_38P4_ES2, IVA_M2_38P4_ES2 +/* 3410 */ +.word IVA_M_38P4, IVA_N_38P4, IVA_FSEL_38P4, IVA_M2_38P4 + + +.globl get_iva_dpll_param +get_iva_dpll_param: + adr r0, iva_dpll_param + mov pc, lr + +/* Core DPLL targets for L3 at 166 & L133 */ +core_dpll_param: +/* 12MHz */ +/* ES1 */ +.word CORE_M_12_ES1, CORE_N_12_ES1, CORE_FSL_12_ES1, CORE_M2_12_ES1 +/* ES2 */ +.word CORE_M_12, CORE_N_12, CORE_FSEL_12, CORE_M2_12 +/* 3410 */ +.word CORE_M_12, CORE_N_12, CORE_FSEL_12, CORE_M2_12 + +/* 13MHz */ +/* ES1 */ +.word CORE_M_13_ES1, CORE_N_13_ES1, CORE_FSL_13_ES1, CORE_M2_13_ES1 +/* ES2 */ +.word CORE_M_13, CORE_N_13, CORE_FSEL_13, CORE_M2_13 +/* 3410 */ +.word CORE_M_13, CORE_N_13, CORE_FSEL_13, CORE_M2_13 + +/* 19.2MHz */ +/* ES1 */ +.word CORE_M_19P2_ES1, CORE_N_19P2_ES1, CORE_FSL_19P2_ES1, CORE_M2_19P2_ES1 +/* ES2 */ +.word CORE_M_19P2, CORE_N_19P2, CORE_FSEL_19P2, CORE_M2_19P2 +/* 3410 */ +.word CORE_M_19P2, CORE_N_19P2, CORE_FSEL_19P2, CORE_M2_19P2 + +/* 26MHz */ +/* ES1 */ +.word CORE_M_26_ES1, CORE_N_26_ES1, CORE_FSL_26_ES1, CORE_M2_26_ES1 +/* ES2 */ +.word CORE_M_26, CORE_N_26, CORE_FSEL_26, CORE_M2_26 +/* 3410 */ +.word CORE_M_26, CORE_N_26, CORE_FSEL_26, CORE_M2_26 + +/* 38.4MHz */ +/* ES1 */ +.word CORE_M_38P4_ES1, CORE_N_38P4_ES1, CORE_FSL_38P4_ES1, CORE_M2_38P4_ES1 +/* ES2 */ +.word CORE_M_38P4, CORE_N_38P4, CORE_FSEL_38P4, CORE_M2_38P4 +/* 3410 */ +.word CORE_M_38P4, CORE_N_38P4, CORE_FSEL_38P4, CORE_M2_38P4 + +.globl get_core_dpll_param +get_core_dpll_param: + adr r0, core_dpll_param + mov pc, lr + +/* PER DPLL values are same for both ES1 and ES2 */ +per_dpll_param: +/* 12MHz */ +.word PER_M_12, PER_N_12, PER_FSEL_12, PER_M2_12 + +/* 13MHz */ +.word PER_M_13, PER_N_13, PER_FSEL_13, PER_M2_13 + +/* 19.2MHz */ +.word PER_M_19P2, PER_N_19P2, PER_FSEL_19P2, PER_M2_19P2 + +/* 26MHz */ +.word PER_M_26, PER_N_26, PER_FSEL_26, PER_M2_26 + +/* 38.4MHz */ +.word PER_M_38P4, PER_N_38P4, PER_FSEL_38P4, PER_M2_38P4 + +.globl get_per_dpll_param +get_per_dpll_param: + adr r0, per_dpll_param + mov pc, lr + +/* PER2 DPLL values */ +per2_dpll_param: +/* 12MHz */ +.word PER2_M_12, PER2_N_12, PER2_FSEL_12, PER2_M2_12 + +/* 13MHz */ +.word PER2_M_13, PER2_N_13, PER2_FSEL_13, PER2_M2_13 + +/* 19.2MHz */ +.word PER2_M_19P2, PER2_N_19P2, PER2_FSEL_19P2, PER2_M2_19P2 + +/* 26MHz */ +.word PER2_M_26, PER2_N_26, PER2_FSEL_26, PER2_M2_26 + +/* 38.4MHz */ +.word PER2_M_38P4, PER2_N_38P4, PER2_FSEL_38P4, PER2_M2_38P4 + +.globl get_per2_dpll_param +get_per2_dpll_param: + adr r0, per2_dpll_param + mov pc, lr + +/* + * Tables for 36XX/37XX devices + * + */ +mpu_36x_dpll_param: +/* 12MHz */ +.word 50, 0, 0, 1 +/* 13MHz */ +.word 600, 12, 0, 1 +/* 19.2MHz */ +.word 125, 3, 0, 1 +/* 26MHz */ +.word 300, 12, 0, 1 +/* 38.4MHz */ +.word 125, 7, 0, 1 + +iva_36x_dpll_param: +/* 12MHz */ +.word 130, 2, 0, 1 +/* 13MHz */ +.word 20, 0, 0, 1 +/* 19.2MHz */ +.word 325, 11, 0, 1 +/* 26MHz */ +.word 10, 0, 0, 1 +/* 38.4MHz */ +.word 325, 23, 0, 1 + +core_36x_dpll_param: +/* 12MHz */ +.word 100, 2, 0, 1 +/* 13MHz */ +.word 400, 12, 0, 1 +/* 19.2MHz */ +.word 375, 17, 0, 1 +/* 26MHz */ +.word 200, 12, 0, 1 +/* 38.4MHz */ +.word 375, 35, 0, 1 + +per_36x_dpll_param: +/* SYSCLK M N M2 M3 M4 M5 M6 m2DIV */ +.word 12000, 360, 4, 9, 16, 5, 4, 3, 1 +.word 13000, 864, 12, 9, 16, 9, 4, 3, 1 +.word 19200, 360, 7, 9, 16, 5, 4, 3, 1 +.word 26000, 432, 12, 9, 16, 9, 4, 3, 1 +.word 38400, 360, 15, 9, 16, 5, 4, 3, 1 + +ENTRY(get_36x_mpu_dpll_param) + adr r0, mpu_36x_dpll_param + mov pc, lr +ENDPROC(get_36x_mpu_dpll_param) + +ENTRY(get_36x_iva_dpll_param) + adr r0, iva_36x_dpll_param + mov pc, lr +ENDPROC(get_36x_iva_dpll_param) + +ENTRY(get_36x_core_dpll_param) + adr r0, core_36x_dpll_param + mov pc, lr +ENDPROC(get_36x_core_dpll_param) + +ENTRY(get_36x_per_dpll_param) + adr r0, per_36x_dpll_param + mov pc, lr +ENDPROC(get_36x_per_dpll_param) diff --git a/arch/arm/cpu/armv7/omap3/mem.c b/arch/arm/cpu/armv7/omap3/mem.c new file mode 100644 index 0000000..d04a5a1 --- /dev/null +++ b/arch/arm/cpu/armv7/omap3/mem.c @@ -0,0 +1,152 @@ +/* + * (C) Copyright 2008 + * Texas Instruments, <www.ti.com> + * + * Author : + * Manikandan Pillai <mani.pillai@ti.com> + * + * Initial Code from: + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mem.h> +#include <asm/arch/sys_proto.h> +#include <command.h> + +struct gpmc *gpmc_cfg; + +#if defined(CONFIG_CMD_NAND) +static const u32 gpmc_m_nand[GPMC_MAX_REG] = { + M_NAND_GPMC_CONFIG1, + M_NAND_GPMC_CONFIG2, + M_NAND_GPMC_CONFIG3, + M_NAND_GPMC_CONFIG4, + M_NAND_GPMC_CONFIG5, + M_NAND_GPMC_CONFIG6, 0 +}; +#endif /* CONFIG_CMD_NAND */ + +#if defined(CONFIG_CMD_ONENAND) +static const u32 gpmc_onenand[GPMC_MAX_REG] = { + ONENAND_GPMC_CONFIG1, + ONENAND_GPMC_CONFIG2, + ONENAND_GPMC_CONFIG3, + ONENAND_GPMC_CONFIG4, + ONENAND_GPMC_CONFIG5, + ONENAND_GPMC_CONFIG6, 0 +}; +#endif /* CONFIG_CMD_ONENAND */ + +/******************************************************** + * mem_ok() - test used to see if timings are correct + * for a part. Helps in guessing which part + * we are currently using. + *******************************************************/ +u32 mem_ok(u32 cs) +{ + u32 val1, val2, addr; + u32 pattern = 0x12345678; + + addr = OMAP34XX_SDRC_CS0 + get_sdr_cs_offset(cs); + + writel(0x0, addr + 0x400); /* clear pos A */ + writel(pattern, addr); /* pattern to pos B */ + writel(0x0, addr + 4); /* remove pattern off the bus */ + val1 = readl(addr + 0x400); /* get pos A value */ + val2 = readl(addr); /* get val2 */ + writel(0x0, addr + 0x400); /* clear pos A */ + + if ((val1 != 0) || (val2 != pattern)) /* see if pos A val changed */ + return 0; + else + return 1; +} + +void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base, + u32 size) +{ + writel(0, &cs->config7); + sdelay(1000); + /* Delay for settling */ + writel(gpmc_config[0], &cs->config1); + writel(gpmc_config[1], &cs->config2); + writel(gpmc_config[2], &cs->config3); + writel(gpmc_config[3], &cs->config4); + writel(gpmc_config[4], &cs->config5); + writel(gpmc_config[5], &cs->config6); + + /* + * Enable the config. size is the CS size and goes in + * bits 11:8. We set bit 6 to enable this CS and the base + * address goes into bits 5:0. + */ + writel((size << 8) | (GPMC_CS_ENABLE << 6) | + ((base >> 24) & GPMC_BASEADDR_MASK), + &cs->config7); + sdelay(2000); +} + +/***************************************************** + * gpmc_init(): init gpmc bus + * Init GPMC for x16, MuxMode (SDRAM in x32). + * This code can only be executed from SRAM or SDRAM. + *****************************************************/ +void gpmc_init(void) +{ + /* putting a blanket check on GPMC based on ZeBu for now */ + gpmc_cfg = (struct gpmc *)GPMC_BASE; +#if defined(CONFIG_CMD_NAND) || defined(CONFIG_CMD_ONENAND) + const u32 *gpmc_config = NULL; + u32 base = 0; + u32 size = 0; +#endif + u32 config = 0; + + /* global settings */ + writel(0, &gpmc_cfg->irqenable); /* isr's sources masked */ + writel(0, &gpmc_cfg->timeout_control);/* timeout disable */ + + config = readl(&gpmc_cfg->config); + config &= (~0xf00); + writel(config, &gpmc_cfg->config); + + /* + * Disable the GPMC0 config set by ROM code + * It conflicts with our MPDB (both at 0x08000000) + */ + writel(0, &gpmc_cfg->cs[0].config7); + sdelay(1000); + +#if defined(CONFIG_CMD_NAND) /* CS 0 */ + gpmc_config = gpmc_m_nand; + + base = PISMO1_NAND_BASE; + size = PISMO1_NAND_SIZE; + enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size); +#endif + +#if defined(CONFIG_CMD_ONENAND) + gpmc_config = gpmc_onenand; + base = PISMO1_ONEN_BASE; + size = PISMO1_ONEN_SIZE; + enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size); +#endif +} diff --git a/arch/arm/cpu/armv7/omap3/sdrc.c b/arch/arm/cpu/armv7/omap3/sdrc.c new file mode 100644 index 0000000..e32bf11 --- /dev/null +++ b/arch/arm/cpu/armv7/omap3/sdrc.c @@ -0,0 +1,250 @@ +/* + * Functions related to OMAP3 SDRC. + * + * This file has been created after exctracting and consolidating + * the SDRC related content from mem.c and board.c, also created + * generic init function (mem_init). + * + * Copyright (C) 2004-2010 + * Texas Instruments Incorporated - http://www.ti.com/ + * + * Copyright (C) 2011 + * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de> + * + * Author : + * Vaibhav Hiremath <hvaibhav@ti.com> + * + * Original implementation by (mem.c, board.c) : + * Sunil Kumar <sunilsaini05@gmail.com> + * Shashi Ranjan <shashiranjanmca05@gmail.com> + * Manikandan Pillai <mani.pillai@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mem.h> +#include <asm/arch/sys_proto.h> + +DECLARE_GLOBAL_DATA_PTR; +extern omap3_sysinfo sysinfo; + +static struct sdrc *sdrc_base = (struct sdrc *)OMAP34XX_SDRC_BASE; + +/* + * is_mem_sdr - + * - Return 1 if mem type in use is SDR + */ +u32 is_mem_sdr(void) +{ + if (readl(&sdrc_base->cs[CS0].mr) == SDRC_MR_0_SDR) + return 1; + return 0; +} + +/* + * make_cs1_contiguous - + * - When we have CS1 populated we want to have it mapped after cs0 to allow + * command line mem=xyz use all memory with out discontinuous support + * compiled in. We could do it in the ATAG, but there really is two banks... + */ +void make_cs1_contiguous(void) +{ + u32 size, a_add_low, a_add_high; + + size = get_sdr_cs_size(CS0); + size >>= 25; /* divide by 32 MiB to find size to offset CS1 */ + a_add_high = (size & 3) << 8; /* set up low field */ + a_add_low = (size & 0x3C) >> 2; /* set up high field */ + writel((a_add_high | a_add_low), &sdrc_base->cs_cfg); + +} + + +/* + * get_sdr_cs_size - + * - Get size of chip select 0/1 + */ +u32 get_sdr_cs_size(u32 cs) +{ + u32 size; + + /* get ram size field */ + size = readl(&sdrc_base->cs[cs].mcfg) >> 8; + size &= 0x3FF; /* remove unwanted bits */ + size <<= 21; /* multiply by 2 MiB to find size in MB */ + return size; +} + +/* + * get_sdr_cs_offset - + * - Get offset of cs from cs0 start + */ +u32 get_sdr_cs_offset(u32 cs) +{ + u32 offset; + + if (!cs) + return 0; + + offset = readl(&sdrc_base->cs_cfg); + offset = (offset & 15) << 27 | (offset & 0x300) << 17; + + return offset; +} + +/* + * write_sdrc_timings - + * - Takes CS and associated timings and initalize SDRAM + * - Test CS to make sure it's OK for use + */ +static void write_sdrc_timings(u32 cs, struct sdrc_actim *sdrc_actim_base, + struct board_sdrc_timings *timings) +{ + /* Setup timings we got from the board. */ + writel(timings->mcfg, &sdrc_base->cs[cs].mcfg); + writel(timings->ctrla, &sdrc_actim_base->ctrla); + writel(timings->ctrlb, &sdrc_actim_base->ctrlb); + writel(timings->rfr_ctrl, &sdrc_base->cs[cs].rfr_ctrl); + writel(CMD_NOP, &sdrc_base->cs[cs].manual); + writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual); + writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual); + writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual); + writel(timings->mr, &sdrc_base->cs[cs].mr); + + /* + * Test ram in this bank + * Disable if bad or not present + */ + if (!mem_ok(cs)) + writel(0, &sdrc_base->cs[cs].mcfg); +} + +/* + * do_sdrc_init - + * - Code called once in C-Stack only context for CS0 and with early being + * true and a possible 2nd time depending on memory configuration from + * stack+global context. + */ +void do_sdrc_init(u32 cs, u32 early) +{ + struct sdrc_actim *sdrc_actim_base0, *sdrc_actim_base1; + struct board_sdrc_timings timings; + + sdrc_actim_base0 = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE; + sdrc_actim_base1 = (struct sdrc_actim *)SDRC_ACTIM_CTRL1_BASE; + + /* + * When called in the early context this may be SPL and we will + * need to set all of the timings. This ends up being board + * specific so we call a helper function to take care of this + * for us. Otherwise, to be safe, we need to copy the settings + * from the first bank to the second. We will setup CS0, + * then set cs_cfg to the appropriate value then try and + * setup CS1. + */ +#ifdef CONFIG_SPL_BUILD + get_board_mem_timings(&timings); +#endif + if (early) { + /* reset sdrc controller */ + writel(SOFTRESET, &sdrc_base->sysconfig); + wait_on_value(RESETDONE, RESETDONE, &sdrc_base->status, + 12000000); + writel(0, &sdrc_base->sysconfig); + + /* setup sdrc to ball mux */ + writel(SDRC_SHARING, &sdrc_base->sharing); + + /* Disable Power Down of CKE because of 1 CKE on combo part */ + writel(WAKEUPPROC | SRFRONRESET | PAGEPOLICY_HIGH, + &sdrc_base->power); + + writel(ENADLL | DLLPHASE_90, &sdrc_base->dlla_ctrl); + sdelay(0x20000); +#ifdef CONFIG_SPL_BUILD + write_sdrc_timings(CS0, sdrc_actim_base0, &timings); + make_cs1_contiguous(); + write_sdrc_timings(CS1, sdrc_actim_base1, &timings); +#endif + + } + + /* + * If we aren't using SPL we have been loaded by some + * other means which may not have correctly initialized + * both CS0 and CS1 (such as some older versions of x-loader) + * so we may be asked now to setup CS1. + */ + if (cs == CS1) { + timings.mcfg = readl(&sdrc_base->cs[CS0].mcfg), + timings.rfr_ctrl = readl(&sdrc_base->cs[CS0].rfr_ctrl); + timings.ctrla = readl(&sdrc_actim_base0->ctrla); + timings.ctrlb = readl(&sdrc_actim_base0->ctrlb); + timings.mr = readl(&sdrc_base->cs[CS0].mr); + write_sdrc_timings(cs, sdrc_actim_base1, &timings); + } +} + +/* + * dram_init - + * - Sets uboots idea of sdram size + */ +int dram_init(void) +{ + unsigned int size0 = 0, size1 = 0; + + size0 = get_sdr_cs_size(CS0); + /* + * We always need to have cs_cfg point at where the second + * bank would be, if present. Failure to do so can lead to + * strange situations where memory isn't detected and + * configured correctly. CS0 will already have been setup + * at this point. + */ + make_cs1_contiguous(); + do_sdrc_init(CS1, NOT_EARLY); + size1 = get_sdr_cs_size(CS1); + + gd->ram_size = size0 + size1; + + return 0; +} + +void dram_init_banksize (void) +{ + unsigned int size0 = 0, size1 = 0; + + size0 = get_sdr_cs_size(CS0); + size1 = get_sdr_cs_size(CS1); + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = size0; + gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1); + gd->bd->bi_dram[1].size = size1; +} + +/* + * mem_init - + * - Init the sdrc chip, + * - Selects CS0 and CS1, + */ +void mem_init(void) +{ + /* only init up first bank here */ + do_sdrc_init(CS0, EARLY_INIT); +} diff --git a/arch/arm/cpu/armv7/omap3/spl_id_nand.c b/arch/arm/cpu/armv7/omap3/spl_id_nand.c new file mode 100644 index 0000000..0871fc9 --- /dev/null +++ b/arch/arm/cpu/armv7/omap3/spl_id_nand.c @@ -0,0 +1,87 @@ +/* + * (C) Copyright 2011 + * Texas Instruments, <www.ti.com> + * + * Author : + * Tom Rini <trini@ti.com> + * + * Initial Code from: + * Richard Woodruff <r-woodruff2@ti.com> + * Jian Zhang <jzhang@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <linux/mtd/nand.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mem.h> + +static struct gpmc *gpmc_config = (struct gpmc *)GPMC_BASE; + +/* nand_command: Send a flash command to the flash chip */ +static void nand_command(u8 command) +{ + writeb(command, &gpmc_config->cs[0].nand_cmd); + + if (command == NAND_CMD_RESET) { + unsigned char ret_val; + writeb(NAND_CMD_STATUS, &gpmc_config->cs[0].nand_cmd); + do { + /* Wait until ready */ + ret_val = readl(&gpmc_config->cs[0].nand_dat); + } while ((ret_val & NAND_STATUS_READY) != NAND_STATUS_READY); + } +} + +/* + * Many boards will want to know the results of the NAND_CMD_READID command + * in order to decide what to do about DDR initialization. This function + * allows us to do that very early and to pass those results back to the + * board so it can make whatever decisions need to be made. + */ +void identify_nand_chip(int *mfr, int *id) +{ + /* Make sure that we have setup GPMC for NAND correctly. */ + writel(M_NAND_GPMC_CONFIG1, &gpmc_config->cs[0].config1); + writel(M_NAND_GPMC_CONFIG2, &gpmc_config->cs[0].config2); + writel(M_NAND_GPMC_CONFIG3, &gpmc_config->cs[0].config3); + writel(M_NAND_GPMC_CONFIG4, &gpmc_config->cs[0].config4); + writel(M_NAND_GPMC_CONFIG5, &gpmc_config->cs[0].config5); + writel(M_NAND_GPMC_CONFIG6, &gpmc_config->cs[0].config6); + + /* + * Enable the config. The CS size goes in bits 11:8. We set + * bit 6 to enable the CS and the base address goes into bits 5:0. + */ + writel((GPMC_SIZE_128M << 8) | (GPMC_CS_ENABLE << 6) | + ((NAND_BASE >> 24) & GPMC_BASEADDR_MASK), + &gpmc_config->cs[0].config7); + + sdelay(2000); + + /* Issue a RESET and then READID */ + nand_command(NAND_CMD_RESET); + nand_command(NAND_CMD_READID); + + /* Set the address to read to 0x0 */ + writeb(0x0, &gpmc_config->cs[0].nand_adr); + + /* Read off the manufacturer and device id. */ + *mfr = readb(&gpmc_config->cs[0].nand_dat); + *id = readb(&gpmc_config->cs[0].nand_dat); +} diff --git a/arch/arm/cpu/armv7/omap3/sys_info.c b/arch/arm/cpu/armv7/omap3/sys_info.c new file mode 100644 index 0000000..08a63d2 --- /dev/null +++ b/arch/arm/cpu/armv7/omap3/sys_info.c @@ -0,0 +1,368 @@ +/* + * (C) Copyright 2008 + * Texas Instruments, <www.ti.com> + * + * Author : + * Manikandan Pillai <mani.pillai@ti.com> + * + * Derived from Beagle Board and 3430 SDP code by + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mem.h> /* get mem tables */ +#include <asm/arch/sys_proto.h> +#include <i2c.h> +#include <linux/compiler.h> + +extern omap3_sysinfo sysinfo; +static struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; + +#ifdef CONFIG_DISPLAY_CPUINFO +static char *rev_s[CPU_3XX_MAX_REV] = { + "1.0", + "2.0", + "2.1", + "3.0", + "3.1", + "UNKNOWN", + "UNKNOWN", + "3.1.2"}; + +/* this is the revision table for 37xx CPUs */ +static char *rev_s_37xx[CPU_37XX_MAX_REV] = { + "1.0", + "1.1", + "1.2"}; +#endif /* CONFIG_DISPLAY_CPUINFO */ + +/***************************************************************** + * dieid_num_r(void) - read and set die ID + *****************************************************************/ +void dieid_num_r(void) +{ + struct ctrl_id *id_base = (struct ctrl_id *)OMAP34XX_ID_L4_IO_BASE; + char *uid_s, die_id[34]; + u32 id[4]; + + memset(die_id, 0, sizeof(die_id)); + + uid_s = getenv("dieid#"); + + if (uid_s == NULL) { + id[3] = readl(&id_base->die_id_0); + id[2] = readl(&id_base->die_id_1); + id[1] = readl(&id_base->die_id_2); + id[0] = readl(&id_base->die_id_3); + sprintf(die_id, "%08x%08x%08x%08x", id[0], id[1], id[2], id[3]); + setenv("dieid#", die_id); + uid_s = die_id; + } + + printf("Die ID #%s\n", uid_s); +} + +/****************************************** + * get_cpu_type(void) - extract cpu info + ******************************************/ +u32 get_cpu_type(void) +{ + return readl(&ctrl_base->ctrl_omap_stat); +} + +/****************************************** + * get_cpu_id(void) - extract cpu id + * returns 0 for ES1.0, cpuid otherwise + ******************************************/ +u32 get_cpu_id(void) +{ + struct ctrl_id *id_base; + u32 cpuid = 0; + + /* + * On ES1.0 the IDCODE register is not exposed on L4 + * so using CPU ID to differentiate between ES1.0 and > ES1.0. + */ + __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r"(cpuid)); + if ((cpuid & 0xf) == 0x0) { + return 0; + } else { + /* Decode the IDs on > ES1.0 */ + id_base = (struct ctrl_id *) OMAP34XX_ID_L4_IO_BASE; + + cpuid = readl(&id_base->idcode); + } + + return cpuid; +} + +/****************************************** + * get_cpu_family(void) - extract cpu info + ******************************************/ +u32 get_cpu_family(void) +{ + u16 hawkeye; + u32 cpu_family; + u32 cpuid = get_cpu_id(); + + if (cpuid == 0) + return CPU_OMAP34XX; + + hawkeye = (cpuid >> HAWKEYE_SHIFT) & 0xffff; + switch (hawkeye) { + case HAWKEYE_OMAP34XX: + cpu_family = CPU_OMAP34XX; + break; + case HAWKEYE_AM35XX: + cpu_family = CPU_AM35XX; + break; + case HAWKEYE_OMAP36XX: + cpu_family = CPU_OMAP36XX; + break; + default: + cpu_family = CPU_OMAP34XX; + } + + return cpu_family; +} + +/****************************************** + * get_cpu_rev(void) - extract version info + ******************************************/ +u32 get_cpu_rev(void) +{ + u32 cpuid = get_cpu_id(); + + if (cpuid == 0) + return CPU_3XX_ES10; + else + return (cpuid >> CPU_3XX_ID_SHIFT) & 0xf; +} + +/***************************************************************** + * get_sku_id(void) - read sku_id to get info on max clock rate + *****************************************************************/ +u32 get_sku_id(void) +{ + struct ctrl_id *id_base = (struct ctrl_id *)OMAP34XX_ID_L4_IO_BASE; + return readl(&id_base->sku_id) & SKUID_CLK_MASK; +} + +/*************************************************************************** + * get_gpmc0_base() - Return current address hardware will be + * fetching from. The below effectively gives what is correct, its a bit + * mis-leading compared to the TRM. For the most general case the mask + * needs to be also taken into account this does work in practice. + * - for u-boot we currently map: + * -- 0 to nothing, + * -- 4 to flash + * -- 8 to enent + * -- c to wifi + ****************************************************************************/ +u32 get_gpmc0_base(void) +{ + u32 b; + + b = readl(&gpmc_cfg->cs[0].config7); + b &= 0x1F; /* keep base [5:0] */ + b = b << 24; /* ret 0x0b000000 */ + return b; +} + +/******************************************************************* + * get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand) + *******************************************************************/ +u32 get_gpmc0_width(void) +{ + return WIDTH_16BIT; +} + +/************************************************************************* + * get_board_rev() - setup to pass kernel board revision information + * returns:(bit[0-3] sub version, higher bit[7-4] is higher version) + *************************************************************************/ +u32 __weak get_board_rev(void) +{ + return 0x20; +} + +/******************************************************** + * get_base(); get upper addr of current execution + *******************************************************/ +u32 get_base(void) +{ + u32 val; + + __asm__ __volatile__("mov %0, pc \n":"=r"(val)::"memory"); + val &= 0xF0000000; + val >>= 28; + return val; +} + +/******************************************************** + * is_running_in_flash() - tell if currently running in + * FLASH. + *******************************************************/ +u32 is_running_in_flash(void) +{ + if (get_base() < 4) + return 1; /* in FLASH */ + + return 0; /* running in SRAM or SDRAM */ +} + +/******************************************************** + * is_running_in_sram() - tell if currently running in + * SRAM. + *******************************************************/ +u32 is_running_in_sram(void) +{ + if (get_base() == 4) + return 1; /* in SRAM */ + + return 0; /* running in FLASH or SDRAM */ +} + +/******************************************************** + * is_running_in_sdram() - tell if currently running in + * SDRAM. + *******************************************************/ +u32 is_running_in_sdram(void) +{ + if (get_base() > 4) + return 1; /* in SDRAM */ + + return 0; /* running in SRAM or FLASH */ +} + +/*************************************************************** + * get_boot_type() - Is this an XIP type device or a stream one + * bits 4-0 specify type. Bit 5 says mem/perif + ***************************************************************/ +u32 get_boot_type(void) +{ + return (readl(&ctrl_base->status) & SYSBOOT_MASK); +} + +/************************************************************* + * get_device_type(): tell if GP/HS/EMU/TST + *************************************************************/ +u32 get_device_type(void) +{ + return ((readl(&ctrl_base->status) & (DEVICE_MASK)) >> 8); +} + +#ifdef CONFIG_DISPLAY_CPUINFO +/** + * Print CPU information + */ +int print_cpuinfo (void) +{ + char *cpu_family_s, *cpu_s, *sec_s, *max_clk; + + switch (get_cpu_family()) { + case CPU_OMAP34XX: + cpu_family_s = "OMAP"; + switch (get_cpu_type()) { + case OMAP3503: + cpu_s = "3503"; + break; + case OMAP3515: + cpu_s = "3515"; + break; + case OMAP3525: + cpu_s = "3525"; + break; + case OMAP3530: + cpu_s = "3530"; + break; + default: + cpu_s = "35XX"; + break; + } + if ((get_cpu_rev() >= CPU_3XX_ES31) && + (get_sku_id() == SKUID_CLK_720MHZ)) + max_clk = "720 MHz"; + else + max_clk = "600 MHz"; + + break; + case CPU_AM35XX: + cpu_family_s = "AM"; + switch (get_cpu_type()) { + case AM3505: + cpu_s = "3505"; + break; + case AM3517: + cpu_s = "3517"; + break; + default: + cpu_s = "35XX"; + break; + } + max_clk = "600 Mhz"; + break; + case CPU_OMAP36XX: + cpu_family_s = "OMAP"; + switch (get_cpu_type()) { + case OMAP3730: + cpu_s = "3630/3730"; + break; + default: + cpu_s = "36XX/37XX"; + break; + } + max_clk = "1 Ghz"; + break; + default: + cpu_family_s = "OMAP"; + cpu_s = "35XX"; + max_clk = "600 Mhz"; + } + + switch (get_device_type()) { + case TST_DEVICE: + sec_s = "TST"; + break; + case EMU_DEVICE: + sec_s = "EMU"; + break; + case HS_DEVICE: + sec_s = "HS"; + break; + case GP_DEVICE: + sec_s = "GP"; + break; + default: + sec_s = "?"; + } + + if (CPU_OMAP36XX == get_cpu_family()) + printf("%s%s-%s ES%s, CPU-OPP2, L3-165MHz, Max CPU Clock %s\n", + cpu_family_s, cpu_s, sec_s, + rev_s_37xx[get_cpu_rev()], max_clk); + else + printf("%s%s-%s ES%s, CPU-OPP2, L3-165MHz, Max CPU Clock %s\n", + cpu_family_s, cpu_s, sec_s, + rev_s[get_cpu_rev()], max_clk); + + return 0; +} +#endif /* CONFIG_DISPLAY_CPUINFO */ diff --git a/arch/arm/cpu/armv7/omap4/Makefile b/arch/arm/cpu/armv7/omap4/Makefile new file mode 100644 index 0000000..40808d1 --- /dev/null +++ b/arch/arm/cpu/armv7/omap4/Makefile @@ -0,0 +1,49 @@ +# +# (C) Copyright 2000-2010 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS += sdram_elpida.o +COBJS += hwinit.o +COBJS += emif.o +COBJS += prcm-regs.o +COBJS += hw_data.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/omap4/config.mk b/arch/arm/cpu/armv7/omap4/config.mk new file mode 100644 index 0000000..b34fa64 --- /dev/null +++ b/arch/arm/cpu/armv7/omap4/config.mk @@ -0,0 +1,30 @@ +# +# Copyright 2011 Linaro Limited +# See file CREDITS for list of people who contributed to this +# project. +# +# (C) Copyright 2010 +# Texas Instruments, <www.ti.com> +# +# Aneesh V <aneesh@ti.com> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +ifdef CONFIG_SPL_BUILD +ALL-y += $(OBJTREE)/MLO +else +ALL-y += $(obj)u-boot.img +endif diff --git a/arch/arm/cpu/armv7/omap4/emif.c b/arch/arm/cpu/armv7/omap4/emif.c new file mode 100644 index 0000000..0ddf35f --- /dev/null +++ b/arch/arm/cpu/armv7/omap4/emif.c @@ -0,0 +1,128 @@ +/* + * EMIF programming + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Aneesh V <aneesh@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/emif.h> +#include <asm/arch/sys_proto.h> +#include <asm/utils.h> + +#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS +u32 *const T_num = (u32 *)OMAP_SRAM_SCRATCH_EMIF_T_NUM; +u32 *const T_den = (u32 *)OMAP_SRAM_SCRATCH_EMIF_T_DEN; +#endif + +#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS +/* Base AC Timing values specified by JESD209-2 for 400MHz operation */ +static const struct lpddr2_ac_timings timings_jedec_400_mhz = { + .max_freq = 400000000, + .RL = 6, + .tRPab = 21, + .tRCD = 18, + .tWR = 15, + .tRASmin = 42, + .tRRD = 10, + .tWTRx2 = 15, + .tXSR = 140, + .tXPx2 = 15, + .tRFCab = 130, + .tRTPx2 = 15, + .tCKE = 3, + .tCKESR = 15, + .tZQCS = 90, + .tZQCL = 360, + .tZQINIT = 1000, + .tDQSCKMAXx2 = 11, + .tRASmax = 70, + .tFAW = 50 +}; + +/* Base AC Timing values specified by JESD209-2 for 200 MHz operation */ +static const struct lpddr2_ac_timings timings_jedec_200_mhz = { + .max_freq = 200000000, + .RL = 3, + .tRPab = 21, + .tRCD = 18, + .tWR = 15, + .tRASmin = 42, + .tRRD = 10, + .tWTRx2 = 20, + .tXSR = 140, + .tXPx2 = 15, + .tRFCab = 130, + .tRTPx2 = 15, + .tCKE = 3, + .tCKESR = 15, + .tZQCS = 90, + .tZQCL = 360, + .tZQINIT = 1000, + .tDQSCKMAXx2 = 11, + .tRASmax = 70, + .tFAW = 50 +}; + +/* + * Min tCK values specified by JESD209-2 + * Min tCK specifies the minimum duration of some AC timing parameters in terms + * of the number of cycles. If the calculated number of cycles based on the + * absolute time value is less than the min tCK value, min tCK value should + * be used instead. This typically happens at low frequencies. + */ +static const struct lpddr2_min_tck min_tck_jedec = { + .tRL = 3, + .tRP_AB = 3, + .tRCD = 3, + .tWR = 3, + .tRAS_MIN = 3, + .tRRD = 2, + .tWTR = 2, + .tXP = 2, + .tRTP = 2, + .tCKE = 3, + .tCKESR = 3, + .tFAW = 8 +}; + +static const struct lpddr2_ac_timings const* + jedec_ac_timings[MAX_NUM_SPEEDBINS] = { + &timings_jedec_200_mhz, + &timings_jedec_400_mhz +}; + +static const struct lpddr2_device_timings jedec_default_timings = { + .ac_timings = jedec_ac_timings, + .min_tck = &min_tck_jedec +}; + +void emif_get_device_timings(u32 emif_nr, + const struct lpddr2_device_timings **cs0_device_timings, + const struct lpddr2_device_timings **cs1_device_timings) +{ + /* Assume Identical devices on EMIF1 & EMIF2 */ + *cs0_device_timings = &jedec_default_timings; + *cs1_device_timings = &jedec_default_timings; +} +#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */ diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c new file mode 100644 index 0000000..b97cad4 --- /dev/null +++ b/arch/arm/cpu/armv7/omap4/hw_data.c @@ -0,0 +1,500 @@ +/* + * + * HW data initialization for OMAP4 + * + * (C) Copyright 2013 + * Texas Instruments, <www.ti.com> + * + * Sricharan R <r.sricharan@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/arch/omap.h> +#include <asm/arch/sys_proto.h> +#include <asm/omap_common.h> +#include <asm/arch/clock.h> +#include <asm/omap_gpio.h> +#include <asm/io.h> + +struct prcm_regs const **prcm = + (struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR; +struct dplls const **dplls_data = + (struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR; +struct vcores_data const **omap_vcores = + (struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR; +struct omap_sys_ctrl_regs const **ctrl = + (struct omap_sys_ctrl_regs const **)OMAP_SRAM_SCRATCH_SYS_CTRL; + +/* + * The M & N values in the following tables are created using the + * following tool: + * tools/omap/clocks_get_m_n.c + * Please use this tool for creating the table for any new frequency. + */ + +/* + * dpll locked at 1400 MHz MPU clk at 700 MHz(OPP100) - DCC OFF + * OMAP4460 OPP_NOM frequency + */ +static const struct dpll_params mpu_dpll_params_1400mhz[NUM_SYS_CLKS] = { + {175, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {700, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {125, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {401, 10, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {350, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {700, 26, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {638, 34, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* + * dpll locked at 1600 MHz - MPU clk at 800 MHz(OPP Turbo 4430) + * OMAP4430 OPP_TURBO frequency + */ +static const struct dpll_params mpu_dpll_params_1600mhz[NUM_SYS_CLKS] = { + {200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {800, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {619, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {125, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {400, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {800, 26, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {125, 5, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* + * dpll locked at 1200 MHz - MPU clk at 600 MHz + * OMAP4430 OPP_NOM frequency + */ +static const struct dpll_params mpu_dpll_params_1200mhz[NUM_SYS_CLKS] = { + {50, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {600, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {250, 6, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {125, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {300, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {200, 8, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {125, 7, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* OMAP4460 OPP_NOM frequency */ +static const struct dpll_params core_dpll_params_1600mhz[NUM_SYS_CLKS] = { + {200, 2, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 12 MHz */ + {800, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 13 MHz */ + {619, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 16.8 MHz */ + {125, 2, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 19.2 MHz */ + {400, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 26 MHz */ + {800, 26, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 27 MHz */ + {125, 5, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* OMAP4430 ES1 OPP_NOM frequency */ +static const struct dpll_params core_dpll_params_es1_1524mhz[NUM_SYS_CLKS] = { + {127, 1, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 12 MHz */ + {762, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 13 MHz */ + {635, 13, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 16.8 MHz */ + {635, 15, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 19.2 MHz */ + {381, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 26 MHz */ + {254, 8, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 27 MHz */ + {496, 24, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* OMAP4430 ES2.X OPP_NOM frequency */ +static const struct dpll_params + core_dpll_params_es2_1600mhz_ddr200mhz[NUM_SYS_CLKS] = { + {200, 2, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 12 MHz */ + {800, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 13 MHz */ + {619, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 16.8 MHz */ + {125, 2, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 19.2 MHz */ + {400, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 26 MHz */ + {800, 26, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 27 MHz */ + {125, 5, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params per_dpll_params_1536mhz[NUM_SYS_CLKS] = { + {64, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 12 MHz */ + {768, 12, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 13 MHz */ + {320, 6, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 16.8 MHz */ + {40, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 19.2 MHz */ + {384, 12, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 26 MHz */ + {256, 8, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 27 MHz */ + {20, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params iva_dpll_params_1862mhz[NUM_SYS_CLKS] = { + {931, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {931, 12, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {665, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {727, 14, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {931, 25, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {931, 26, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {291, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* ABE M & N values with sys_clk as source */ +static const struct dpll_params + abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = { + {49, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {68, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {35, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {46, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {34, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {29, 7, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {64, 24, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* ABE M & N values with 32K clock as source */ +static const struct dpll_params abe_dpll_params_32k_196608khz = { + 750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1 +}; + +static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = { + {80, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {960, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {400, 6, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {50, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {480, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {320, 8, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {25, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +struct dplls omap4430_dplls_es1 = { + .mpu = mpu_dpll_params_1200mhz, + .core = core_dpll_params_es1_1524mhz, + .per = per_dpll_params_1536mhz, + .iva = iva_dpll_params_1862mhz, +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + .abe = abe_dpll_params_sysclk_196608khz, +#else + .abe = &abe_dpll_params_32k_196608khz, +#endif + .usb = usb_dpll_params_1920mhz, + .ddr = NULL +}; + +struct dplls omap4430_dplls = { + .mpu = mpu_dpll_params_1200mhz, + .core = core_dpll_params_1600mhz, + .per = per_dpll_params_1536mhz, + .iva = iva_dpll_params_1862mhz, +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + .abe = abe_dpll_params_sysclk_196608khz, +#else + .abe = &abe_dpll_params_32k_196608khz, +#endif + .usb = usb_dpll_params_1920mhz, + .ddr = NULL +}; + +struct dplls omap4460_dplls = { + .mpu = mpu_dpll_params_1400mhz, + .core = core_dpll_params_1600mhz, + .per = per_dpll_params_1536mhz, + .iva = iva_dpll_params_1862mhz, +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + .abe = abe_dpll_params_sysclk_196608khz, +#else + .abe = &abe_dpll_params_32k_196608khz, +#endif + .usb = usb_dpll_params_1920mhz, + .ddr = NULL +}; + +struct pmic_data twl6030_4430es1 = { + .base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV, + .step = 12660, /* 12.66 mV represented in uV */ + /* The code starts at 1 not 0 */ + .start_code = 1, + .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR, + .pmic_bus_init = sri2c_init, + .pmic_write = omap_vc_bypass_send_value, +}; + +struct pmic_data twl6030 = { + .base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV, + .step = 12660, /* 12.66 mV represented in uV */ + /* The code starts at 1 not 0 */ + .start_code = 1, + .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR, + .pmic_bus_init = sri2c_init, + .pmic_write = omap_vc_bypass_send_value, +}; + +struct pmic_data tps62361 = { + .base_offset = TPS62361_BASE_VOLT_MV, + .step = 10000, /* 10 mV represented in uV */ + .start_code = 0, + .gpio = TPS62361_VSEL0_GPIO, + .gpio_en = 1, + .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR, + .pmic_bus_init = sri2c_init, + .pmic_write = omap_vc_bypass_send_value, +}; + +struct vcores_data omap4430_volts_es1 = { + .mpu.value = 1325, + .mpu.addr = SMPS_REG_ADDR_VCORE1, + .mpu.pmic = &twl6030_4430es1, + + .core.value = 1200, + .core.addr = SMPS_REG_ADDR_VCORE3, + .core.pmic = &twl6030_4430es1, + + .mm.value = 1200, + .mm.addr = SMPS_REG_ADDR_VCORE2, + .mm.pmic = &twl6030_4430es1, +}; + +struct vcores_data omap4430_volts = { + .mpu.value = 1325, + .mpu.addr = SMPS_REG_ADDR_VCORE1, + .mpu.pmic = &twl6030, + + .core.value = 1200, + .core.addr = SMPS_REG_ADDR_VCORE3, + .core.pmic = &twl6030, + + .mm.value = 1200, + .mm.addr = SMPS_REG_ADDR_VCORE2, + .mm.pmic = &twl6030, +}; + +struct vcores_data omap4460_volts = { + .mpu.value = 1203, + .mpu.addr = TPS62361_REG_ADDR_SET1, + .mpu.pmic = &tps62361, + + .core.value = 1200, + .core.addr = SMPS_REG_ADDR_VCORE1, + .core.pmic = &twl6030, + + .mm.value = 1200, + .mm.addr = SMPS_REG_ADDR_VCORE2, + .mm.pmic = &twl6030, +}; + +/* + * Enable essential clock domains, modules and + * do some additional special settings needed + */ +void enable_basic_clocks(void) +{ + u32 const clk_domains_essential[] = { + (*prcm)->cm_l4per_clkstctrl, + (*prcm)->cm_l3init_clkstctrl, + (*prcm)->cm_memif_clkstctrl, + (*prcm)->cm_l4cfg_clkstctrl, + 0 + }; + + u32 const clk_modules_hw_auto_essential[] = { + (*prcm)->cm_l3_gpmc_clkctrl, + (*prcm)->cm_memif_emif_1_clkctrl, + (*prcm)->cm_memif_emif_2_clkctrl, + (*prcm)->cm_l4cfg_l4_cfg_clkctrl, + (*prcm)->cm_wkup_gpio1_clkctrl, + (*prcm)->cm_l4per_gpio2_clkctrl, + (*prcm)->cm_l4per_gpio3_clkctrl, + (*prcm)->cm_l4per_gpio4_clkctrl, + (*prcm)->cm_l4per_gpio5_clkctrl, + (*prcm)->cm_l4per_gpio6_clkctrl, + 0 + }; + + u32 const clk_modules_explicit_en_essential[] = { + (*prcm)->cm_wkup_gptimer1_clkctrl, + (*prcm)->cm_l3init_hsmmc1_clkctrl, + (*prcm)->cm_l3init_hsmmc2_clkctrl, + (*prcm)->cm_l4per_gptimer2_clkctrl, + (*prcm)->cm_wkup_wdtimer2_clkctrl, + (*prcm)->cm_l4per_uart3_clkctrl, + 0 + }; + + /* Enable optional additional functional clock for GPIO4 */ + setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl, + GPIO4_CLKCTRL_OPTFCLKEN_MASK); + + /* Enable 96 MHz clock for MMC1 & MMC2 */ + setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl, + HSMMC_CLKCTRL_CLKSEL_MASK); + setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl, + HSMMC_CLKCTRL_CLKSEL_MASK); + + /* Select 32KHz clock as the source of GPTIMER1 */ + setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl, + GPTIMER1_CLKCTRL_CLKSEL_MASK); + + /* Enable optional 48M functional clock for USB PHY */ + setbits_le32((*prcm)->cm_l3init_usbphy_clkctrl, + USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK); + + do_enable_clocks(clk_domains_essential, + clk_modules_hw_auto_essential, + clk_modules_explicit_en_essential, + 1); +} + +void enable_basic_uboot_clocks(void) +{ + u32 const clk_domains_essential[] = { + 0 + }; + + u32 const clk_modules_hw_auto_essential[] = { + (*prcm)->cm_l3init_hsusbotg_clkctrl, + (*prcm)->cm_l3init_usbphy_clkctrl, + (*prcm)->cm_l3init_usbphy_clkctrl, + (*prcm)->cm_clksel_usb_60mhz, + (*prcm)->cm_l3init_hsusbtll_clkctrl, + 0 + }; + + u32 const clk_modules_explicit_en_essential[] = { + (*prcm)->cm_l4per_mcspi1_clkctrl, + (*prcm)->cm_l4per_i2c1_clkctrl, + (*prcm)->cm_l4per_i2c2_clkctrl, + (*prcm)->cm_l4per_i2c3_clkctrl, + (*prcm)->cm_l4per_i2c4_clkctrl, + (*prcm)->cm_l3init_hsusbhost_clkctrl, + 0 + }; + + do_enable_clocks(clk_domains_essential, + clk_modules_hw_auto_essential, + clk_modules_explicit_en_essential, + 1); +} + +/* + * Enable non-essential clock domains, modules and + * do some additional special settings needed + */ +void enable_non_essential_clocks(void) +{ + u32 const clk_domains_non_essential[] = { + (*prcm)->cm_mpu_m3_clkstctrl, + (*prcm)->cm_ivahd_clkstctrl, + (*prcm)->cm_dsp_clkstctrl, + (*prcm)->cm_dss_clkstctrl, + (*prcm)->cm_sgx_clkstctrl, + (*prcm)->cm1_abe_clkstctrl, + (*prcm)->cm_c2c_clkstctrl, + (*prcm)->cm_cam_clkstctrl, + (*prcm)->cm_dss_clkstctrl, + (*prcm)->cm_sdma_clkstctrl, + 0 + }; + + u32 const clk_modules_hw_auto_non_essential[] = { + (*prcm)->cm_l3instr_l3_3_clkctrl, + (*prcm)->cm_l3instr_l3_instr_clkctrl, + (*prcm)->cm_l3instr_intrconn_wp1_clkctrl, + (*prcm)->cm_l3init_hsi_clkctrl, + 0 + }; + + u32 const clk_modules_explicit_en_non_essential[] = { + (*prcm)->cm1_abe_aess_clkctrl, + (*prcm)->cm1_abe_pdm_clkctrl, + (*prcm)->cm1_abe_dmic_clkctrl, + (*prcm)->cm1_abe_mcasp_clkctrl, + (*prcm)->cm1_abe_mcbsp1_clkctrl, + (*prcm)->cm1_abe_mcbsp2_clkctrl, + (*prcm)->cm1_abe_mcbsp3_clkctrl, + (*prcm)->cm1_abe_slimbus_clkctrl, + (*prcm)->cm1_abe_timer5_clkctrl, + (*prcm)->cm1_abe_timer6_clkctrl, + (*prcm)->cm1_abe_timer7_clkctrl, + (*prcm)->cm1_abe_timer8_clkctrl, + (*prcm)->cm1_abe_wdt3_clkctrl, + (*prcm)->cm_l4per_gptimer9_clkctrl, + (*prcm)->cm_l4per_gptimer10_clkctrl, + (*prcm)->cm_l4per_gptimer11_clkctrl, + (*prcm)->cm_l4per_gptimer3_clkctrl, + (*prcm)->cm_l4per_gptimer4_clkctrl, + (*prcm)->cm_l4per_hdq1w_clkctrl, + (*prcm)->cm_l4per_mcbsp4_clkctrl, + (*prcm)->cm_l4per_mcspi2_clkctrl, + (*prcm)->cm_l4per_mcspi3_clkctrl, + (*prcm)->cm_l4per_mcspi4_clkctrl, + (*prcm)->cm_l4per_mmcsd3_clkctrl, + (*prcm)->cm_l4per_mmcsd4_clkctrl, + (*prcm)->cm_l4per_mmcsd5_clkctrl, + (*prcm)->cm_l4per_uart1_clkctrl, + (*prcm)->cm_l4per_uart2_clkctrl, + (*prcm)->cm_l4per_uart4_clkctrl, + (*prcm)->cm_wkup_keyboard_clkctrl, + (*prcm)->cm_wkup_wdtimer2_clkctrl, + (*prcm)->cm_cam_iss_clkctrl, + (*prcm)->cm_cam_fdif_clkctrl, + (*prcm)->cm_dss_dss_clkctrl, + (*prcm)->cm_sgx_sgx_clkctrl, + 0 + }; + + /* Enable optional functional clock for ISS */ + setbits_le32((*prcm)->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK); + + /* Enable all optional functional clocks of DSS */ + setbits_le32((*prcm)->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK); + + do_enable_clocks(clk_domains_non_essential, + clk_modules_hw_auto_non_essential, + clk_modules_explicit_en_non_essential, + 0); + + /* Put camera module in no sleep mode */ + clrsetbits_le32((*prcm)->cm_cam_clkstctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + CD_CLKCTRL_CLKTRCTRL_NO_SLEEP << + MODULE_CLKCTRL_MODULEMODE_SHIFT); +} + +void hw_data_init(void) +{ + u32 omap_rev = omap_revision(); + + (*prcm) = &omap4_prcm; + + switch (omap_rev) { + + case OMAP4430_ES1_0: + *dplls_data = &omap4430_dplls_es1; + *omap_vcores = &omap4430_volts_es1; + break; + + case OMAP4430_ES2_0: + case OMAP4430_ES2_1: + case OMAP4430_ES2_2: + case OMAP4430_ES2_3: + *dplls_data = &omap4430_dplls; + *omap_vcores = &omap4430_volts; + break; + + case OMAP4460_ES1_0: + case OMAP4460_ES1_1: + *dplls_data = &omap4460_dplls; + *omap_vcores = &omap4460_volts; + break; + + default: + printf("\n INVALID OMAP REVISION "); + } + + *ctrl = &omap4_ctrl; +} diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c new file mode 100644 index 0000000..81f5a48 --- /dev/null +++ b/arch/arm/cpu/armv7/omap4/hwinit.c @@ -0,0 +1,182 @@ +/* + * + * Common functions for OMAP4 based boards + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Author : + * Aneesh V <aneesh@ti.com> + * Steve Sakoman <steve@sakoman.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/armv7.h> +#include <asm/arch/cpu.h> +#include <asm/arch/sys_proto.h> +#include <asm/sizes.h> +#include <asm/emif.h> +#include <asm/arch/gpio.h> +#include <asm/omap_common.h> + +DECLARE_GLOBAL_DATA_PTR; + +u32 *const omap_si_rev = (u32 *)OMAP_SRAM_SCRATCH_OMAP_REV; + +static const struct gpio_bank gpio_bank_44xx[6] = { + { (void *)OMAP44XX_GPIO1_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP44XX_GPIO2_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP44XX_GPIO3_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP44XX_GPIO4_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP44XX_GPIO5_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP44XX_GPIO6_BASE, METHOD_GPIO_24XX }, +}; + +const struct gpio_bank *const omap_gpio_bank = gpio_bank_44xx; + +#ifdef CONFIG_SPL_BUILD +/* + * Some tuning of IOs for optimal power and performance + */ +void do_io_settings(void) +{ + u32 lpddr2io; + + u32 omap4_rev = omap_revision(); + + if (omap4_rev == OMAP4430_ES1_0) + lpddr2io = CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN; + else if (omap4_rev == OMAP4430_ES2_0) + lpddr2io = CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER; + else + lpddr2io = CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN; + + /* EMIF1 */ + writel(lpddr2io, (*ctrl)->control_lpddr2io1_0); + writel(lpddr2io, (*ctrl)->control_lpddr2io1_1); + /* No pull for GR10 as per hw team's recommendation */ + writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK, + (*ctrl)->control_lpddr2io1_2); + writel(CONTROL_LPDDR2IO_3_VAL, (*ctrl)->control_lpddr2io1_3); + + /* EMIF2 */ + writel(lpddr2io, (*ctrl)->control_lpddr2io2_0); + writel(lpddr2io, (*ctrl)->control_lpddr2io2_1); + /* No pull for GR10 as per hw team's recommendation */ + writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK, + (*ctrl)->control_lpddr2io2_2); + writel(CONTROL_LPDDR2IO_3_VAL, (*ctrl)->control_lpddr2io2_3); + + /* + * Some of these settings (TRIM values) come from eFuse and are + * in turn programmed in the eFuse at manufacturing time after + * calibration of the device. Do the software over-ride only if + * the device is not correctly trimmed + */ + if (!(readl((*ctrl)->control_std_fuse_opp_bgap) & 0xFFFF)) { + + writel(LDOSRAM_VOLT_CTRL_OVERRIDE, + (*ctrl)->control_ldosram_iva_voltage_ctrl); + + writel(LDOSRAM_VOLT_CTRL_OVERRIDE, + (*ctrl)->control_ldosram_mpu_voltage_ctrl); + + writel(LDOSRAM_VOLT_CTRL_OVERRIDE, + (*ctrl)->control_ldosram_core_voltage_ctrl); + } + + /* + * Over-ride the register + * i. unconditionally for all 4430 + * ii. only if un-trimmed for 4460 + */ + if (!readl((*ctrl)->control_efuse_1)) + writel(CONTROL_EFUSE_1_OVERRIDE, (*ctrl)->control_efuse_1); + + if ((omap4_rev < OMAP4460_ES1_0) || !readl((*ctrl)->control_efuse_2)) + writel(CONTROL_EFUSE_2_OVERRIDE, (*ctrl)->control_efuse_2); +} +#endif /* CONFIG_SPL_BUILD */ + +/* dummy fuction for omap4 */ +void config_data_eye_leveling_samples(u32 emif_base) +{ +} + +void init_omap_revision(void) +{ + /* + * For some of the ES2/ES1 boards ID_CODE is not reliable: + * Also, ES1 and ES2 have different ARM revisions + * So use ARM revision for identification + */ + unsigned int arm_rev = cortex_rev(); + + switch (arm_rev) { + case MIDR_CORTEX_A9_R0P1: + *omap_si_rev = OMAP4430_ES1_0; + break; + case MIDR_CORTEX_A9_R1P2: + switch (readl(CONTROL_ID_CODE)) { + case OMAP4_CONTROL_ID_CODE_ES2_0: + *omap_si_rev = OMAP4430_ES2_0; + break; + case OMAP4_CONTROL_ID_CODE_ES2_1: + *omap_si_rev = OMAP4430_ES2_1; + break; + case OMAP4_CONTROL_ID_CODE_ES2_2: + *omap_si_rev = OMAP4430_ES2_2; + break; + default: + *omap_si_rev = OMAP4430_ES2_0; + break; + } + break; + case MIDR_CORTEX_A9_R1P3: + *omap_si_rev = OMAP4430_ES2_3; + break; + case MIDR_CORTEX_A9_R2P10: + switch (readl(CONTROL_ID_CODE)) { + case OMAP4460_CONTROL_ID_CODE_ES1_1: + *omap_si_rev = OMAP4460_ES1_1; + break; + case OMAP4460_CONTROL_ID_CODE_ES1_0: + default: + *omap_si_rev = OMAP4460_ES1_0; + break; + } + break; + default: + *omap_si_rev = OMAP4430_SILICON_ID_INVALID; + break; + } +} + +#ifndef CONFIG_SYS_L2CACHE_OFF +void v7_outer_cache_enable(void) +{ + set_pl310_ctrl_reg(1); +} + +void v7_outer_cache_disable(void) +{ + set_pl310_ctrl_reg(0); +} +#endif /* !CONFIG_SYS_L2CACHE_OFF */ diff --git a/arch/arm/cpu/armv7/omap4/prcm-regs.c b/arch/arm/cpu/armv7/omap4/prcm-regs.c new file mode 100644 index 0000000..7e71ca0 --- /dev/null +++ b/arch/arm/cpu/armv7/omap4/prcm-regs.c @@ -0,0 +1,318 @@ +/* + * + * HW regs data for OMAP4 + * + * (C) Copyright 2013 + * Texas Instruments, <www.ti.com> + * + * Sricharan R <r.sricharan@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/omap_common.h> + +struct prcm_regs const omap4_prcm = { + /* cm1.ckgen */ + .cm_clksel_core = 0x4a004100, + .cm_clksel_abe = 0x4a004108, + .cm_dll_ctrl = 0x4a004110, + .cm_clkmode_dpll_core = 0x4a004120, + .cm_idlest_dpll_core = 0x4a004124, + .cm_autoidle_dpll_core = 0x4a004128, + .cm_clksel_dpll_core = 0x4a00412c, + .cm_div_m2_dpll_core = 0x4a004130, + .cm_div_m3_dpll_core = 0x4a004134, + .cm_div_m4_dpll_core = 0x4a004138, + .cm_div_m5_dpll_core = 0x4a00413c, + .cm_div_m6_dpll_core = 0x4a004140, + .cm_div_m7_dpll_core = 0x4a004144, + .cm_ssc_deltamstep_dpll_core = 0x4a004148, + .cm_ssc_modfreqdiv_dpll_core = 0x4a00414c, + .cm_emu_override_dpll_core = 0x4a004150, + .cm_clkmode_dpll_mpu = 0x4a004160, + .cm_idlest_dpll_mpu = 0x4a004164, + .cm_autoidle_dpll_mpu = 0x4a004168, + .cm_clksel_dpll_mpu = 0x4a00416c, + .cm_div_m2_dpll_mpu = 0x4a004170, + .cm_ssc_deltamstep_dpll_mpu = 0x4a004188, + .cm_ssc_modfreqdiv_dpll_mpu = 0x4a00418c, + .cm_bypclk_dpll_mpu = 0x4a00419c, + .cm_clkmode_dpll_iva = 0x4a0041a0, + .cm_idlest_dpll_iva = 0x4a0041a4, + .cm_autoidle_dpll_iva = 0x4a0041a8, + .cm_clksel_dpll_iva = 0x4a0041ac, + .cm_div_m4_dpll_iva = 0x4a0041b8, + .cm_div_m5_dpll_iva = 0x4a0041bc, + .cm_ssc_deltamstep_dpll_iva = 0x4a0041c8, + .cm_ssc_modfreqdiv_dpll_iva = 0x4a0041cc, + .cm_bypclk_dpll_iva = 0x4a0041dc, + .cm_clkmode_dpll_abe = 0x4a0041e0, + .cm_idlest_dpll_abe = 0x4a0041e4, + .cm_autoidle_dpll_abe = 0x4a0041e8, + .cm_clksel_dpll_abe = 0x4a0041ec, + .cm_div_m2_dpll_abe = 0x4a0041f0, + .cm_div_m3_dpll_abe = 0x4a0041f4, + .cm_ssc_deltamstep_dpll_abe = 0x4a004208, + .cm_ssc_modfreqdiv_dpll_abe = 0x4a00420c, + .cm_clkmode_dpll_ddrphy = 0x4a004220, + .cm_idlest_dpll_ddrphy = 0x4a004224, + .cm_autoidle_dpll_ddrphy = 0x4a004228, + .cm_clksel_dpll_ddrphy = 0x4a00422c, + .cm_div_m2_dpll_ddrphy = 0x4a004230, + .cm_div_m4_dpll_ddrphy = 0x4a004238, + .cm_div_m5_dpll_ddrphy = 0x4a00423c, + .cm_div_m6_dpll_ddrphy = 0x4a004240, + .cm_ssc_deltamstep_dpll_ddrphy = 0x4a004248, + .cm_shadow_freq_config1 = 0x4a004260, + .cm_mpu_mpu_clkctrl = 0x4a004320, + + /* cm1.dsp */ + .cm_dsp_clkstctrl = 0x4a004400, + .cm_dsp_dsp_clkctrl = 0x4a004420, + + /* cm1.abe */ + .cm1_abe_clkstctrl = 0x4a004500, + .cm1_abe_l4abe_clkctrl = 0x4a004520, + .cm1_abe_aess_clkctrl = 0x4a004528, + .cm1_abe_pdm_clkctrl = 0x4a004530, + .cm1_abe_dmic_clkctrl = 0x4a004538, + .cm1_abe_mcasp_clkctrl = 0x4a004540, + .cm1_abe_mcbsp1_clkctrl = 0x4a004548, + .cm1_abe_mcbsp2_clkctrl = 0x4a004550, + .cm1_abe_mcbsp3_clkctrl = 0x4a004558, + .cm1_abe_slimbus_clkctrl = 0x4a004560, + .cm1_abe_timer5_clkctrl = 0x4a004568, + .cm1_abe_timer6_clkctrl = 0x4a004570, + .cm1_abe_timer7_clkctrl = 0x4a004578, + .cm1_abe_timer8_clkctrl = 0x4a004580, + .cm1_abe_wdt3_clkctrl = 0x4a004588, + + /* cm2.ckgen */ + .cm_clksel_mpu_m3_iss_root = 0x4a008100, + .cm_clksel_usb_60mhz = 0x4a008104, + .cm_scale_fclk = 0x4a008108, + .cm_core_dvfs_perf1 = 0x4a008110, + .cm_core_dvfs_perf2 = 0x4a008114, + .cm_core_dvfs_perf3 = 0x4a008118, + .cm_core_dvfs_perf4 = 0x4a00811c, + .cm_core_dvfs_current = 0x4a008124, + .cm_iva_dvfs_perf_tesla = 0x4a008128, + .cm_iva_dvfs_perf_ivahd = 0x4a00812c, + .cm_iva_dvfs_perf_abe = 0x4a008130, + .cm_iva_dvfs_current = 0x4a008138, + .cm_clkmode_dpll_per = 0x4a008140, + .cm_idlest_dpll_per = 0x4a008144, + .cm_autoidle_dpll_per = 0x4a008148, + .cm_clksel_dpll_per = 0x4a00814c, + .cm_div_m2_dpll_per = 0x4a008150, + .cm_div_m3_dpll_per = 0x4a008154, + .cm_div_m4_dpll_per = 0x4a008158, + .cm_div_m5_dpll_per = 0x4a00815c, + .cm_div_m6_dpll_per = 0x4a008160, + .cm_div_m7_dpll_per = 0x4a008164, + .cm_ssc_deltamstep_dpll_per = 0x4a008168, + .cm_ssc_modfreqdiv_dpll_per = 0x4a00816c, + .cm_emu_override_dpll_per = 0x4a008170, + .cm_clkmode_dpll_usb = 0x4a008180, + .cm_idlest_dpll_usb = 0x4a008184, + .cm_autoidle_dpll_usb = 0x4a008188, + .cm_clksel_dpll_usb = 0x4a00818c, + .cm_div_m2_dpll_usb = 0x4a008190, + .cm_ssc_deltamstep_dpll_usb = 0x4a0081a8, + .cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac, + .cm_clkdcoldo_dpll_usb = 0x4a0081b4, + .cm_clkmode_dpll_unipro = 0x4a0081c0, + .cm_idlest_dpll_unipro = 0x4a0081c4, + .cm_autoidle_dpll_unipro = 0x4a0081c8, + .cm_clksel_dpll_unipro = 0x4a0081cc, + .cm_div_m2_dpll_unipro = 0x4a0081d0, + .cm_ssc_deltamstep_dpll_unipro = 0x4a0081e8, + .cm_ssc_modfreqdiv_dpll_unipro = 0x4a0081ec, + + /* cm2.core */ + .cm_l3_1_clkstctrl = 0x4a008700, + .cm_l3_1_dynamicdep = 0x4a008708, + .cm_l3_1_l3_1_clkctrl = 0x4a008720, + .cm_l3_2_clkstctrl = 0x4a008800, + .cm_l3_2_dynamicdep = 0x4a008808, + .cm_l3_2_l3_2_clkctrl = 0x4a008820, + .cm_l3_gpmc_clkctrl = 0x4a008828, + .cm_l3_2_ocmc_ram_clkctrl = 0x4a008830, + .cm_mpu_m3_clkstctrl = 0x4a008900, + .cm_mpu_m3_staticdep = 0x4a008904, + .cm_mpu_m3_dynamicdep = 0x4a008908, + .cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920, + .cm_sdma_clkstctrl = 0x4a008a00, + .cm_sdma_staticdep = 0x4a008a04, + .cm_sdma_dynamicdep = 0x4a008a08, + .cm_sdma_sdma_clkctrl = 0x4a008a20, + .cm_memif_clkstctrl = 0x4a008b00, + .cm_memif_dmm_clkctrl = 0x4a008b20, + .cm_memif_emif_fw_clkctrl = 0x4a008b28, + .cm_memif_emif_1_clkctrl = 0x4a008b30, + .cm_memif_emif_2_clkctrl = 0x4a008b38, + .cm_memif_dll_clkctrl = 0x4a008b40, + .cm_memif_emif_h1_clkctrl = 0x4a008b50, + .cm_memif_emif_h2_clkctrl = 0x4a008b58, + .cm_memif_dll_h_clkctrl = 0x4a008b60, + .cm_c2c_clkstctrl = 0x4a008c00, + .cm_c2c_staticdep = 0x4a008c04, + .cm_c2c_dynamicdep = 0x4a008c08, + .cm_c2c_sad2d_clkctrl = 0x4a008c20, + .cm_c2c_modem_icr_clkctrl = 0x4a008c28, + .cm_c2c_sad2d_fw_clkctrl = 0x4a008c30, + .cm_l4cfg_clkstctrl = 0x4a008d00, + .cm_l4cfg_dynamicdep = 0x4a008d08, + .cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20, + .cm_l4cfg_hw_sem_clkctrl = 0x4a008d28, + .cm_l4cfg_mailbox_clkctrl = 0x4a008d30, + .cm_l4cfg_sar_rom_clkctrl = 0x4a008d38, + .cm_l3instr_clkstctrl = 0x4a008e00, + .cm_l3instr_l3_3_clkctrl = 0x4a008e20, + .cm_l3instr_l3_instr_clkctrl = 0x4a008e28, + .cm_l3instr_intrconn_wp1_clkct = 0x4a008e40, + .cm_ivahd_clkstctrl = 0x4a008f00, + + /* cm2.ivahd */ + .cm_ivahd_ivahd_clkctrl = 0x4a008f20, + .cm_ivahd_sl2_clkctrl = 0x4a008f28, + + /* cm2.cam */ + .cm_cam_clkstctrl = 0x4a009000, + .cm_cam_iss_clkctrl = 0x4a009020, + .cm_cam_fdif_clkctrl = 0x4a009028, + + /* cm2.dss */ + .cm_dss_clkstctrl = 0x4a009100, + .cm_dss_dss_clkctrl = 0x4a009120, + + /* cm2.sgx */ + .cm_sgx_clkstctrl = 0x4a009200, + .cm_sgx_sgx_clkctrl = 0x4a009220, + + /* cm2.l3init */ + .cm_l3init_clkstctrl = 0x4a009300, + .cm_l3init_hsmmc1_clkctrl = 0x4a009328, + .cm_l3init_hsmmc2_clkctrl = 0x4a009330, + .cm_l3init_hsi_clkctrl = 0x4a009338, + .cm_l3init_hsusbhost_clkctrl = 0x4a009358, + .cm_l3init_hsusbotg_clkctrl = 0x4a009360, + .cm_l3init_hsusbtll_clkctrl = 0x4a009368, + .cm_l3init_p1500_clkctrl = 0x4a009378, + .cm_l3init_fsusb_clkctrl = 0x4a0093d0, + .cm_l3init_usbphy_clkctrl = 0x4a0093e0, + + /* cm2.l4per */ + .cm_l4per_clkstctrl = 0x4a009400, + .cm_l4per_dynamicdep = 0x4a009408, + .cm_l4per_adc_clkctrl = 0x4a009420, + .cm_l4per_gptimer10_clkctrl = 0x4a009428, + .cm_l4per_gptimer11_clkctrl = 0x4a009430, + .cm_l4per_gptimer2_clkctrl = 0x4a009438, + .cm_l4per_gptimer3_clkctrl = 0x4a009440, + .cm_l4per_gptimer4_clkctrl = 0x4a009448, + .cm_l4per_gptimer9_clkctrl = 0x4a009450, + .cm_l4per_elm_clkctrl = 0x4a009458, + .cm_l4per_gpio2_clkctrl = 0x4a009460, + .cm_l4per_gpio3_clkctrl = 0x4a009468, + .cm_l4per_gpio4_clkctrl = 0x4a009470, + .cm_l4per_gpio5_clkctrl = 0x4a009478, + .cm_l4per_gpio6_clkctrl = 0x4a009480, + .cm_l4per_hdq1w_clkctrl = 0x4a009488, + .cm_l4per_hecc1_clkctrl = 0x4a009490, + .cm_l4per_hecc2_clkctrl = 0x4a009498, + .cm_l4per_i2c1_clkctrl = 0x4a0094a0, + .cm_l4per_i2c2_clkctrl = 0x4a0094a8, + .cm_l4per_i2c3_clkctrl = 0x4a0094b0, + .cm_l4per_i2c4_clkctrl = 0x4a0094b8, + .cm_l4per_l4per_clkctrl = 0x4a0094c0, + .cm_l4per_mcasp2_clkctrl = 0x4a0094d0, + .cm_l4per_mcasp3_clkctrl = 0x4a0094d8, + .cm_l4per_mcbsp4_clkctrl = 0x4a0094e0, + .cm_l4per_mgate_clkctrl = 0x4a0094e8, + .cm_l4per_mcspi1_clkctrl = 0x4a0094f0, + .cm_l4per_mcspi2_clkctrl = 0x4a0094f8, + .cm_l4per_mcspi3_clkctrl = 0x4a009500, + .cm_l4per_mcspi4_clkctrl = 0x4a009508, + .cm_l4per_mmcsd3_clkctrl = 0x4a009520, + .cm_l4per_mmcsd4_clkctrl = 0x4a009528, + .cm_l4per_msprohg_clkctrl = 0x4a009530, + .cm_l4per_slimbus2_clkctrl = 0x4a009538, + .cm_l4per_uart1_clkctrl = 0x4a009540, + .cm_l4per_uart2_clkctrl = 0x4a009548, + .cm_l4per_uart3_clkctrl = 0x4a009550, + .cm_l4per_uart4_clkctrl = 0x4a009558, + .cm_l4per_mmcsd5_clkctrl = 0x4a009560, + .cm_l4per_i2c5_clkctrl = 0x4a009568, + .cm_l4sec_clkstctrl = 0x4a009580, + .cm_l4sec_staticdep = 0x4a009584, + .cm_l4sec_dynamicdep = 0x4a009588, + .cm_l4sec_aes1_clkctrl = 0x4a0095a0, + .cm_l4sec_aes2_clkctrl = 0x4a0095a8, + .cm_l4sec_des3des_clkctrl = 0x4a0095b0, + .cm_l4sec_pkaeip29_clkctrl = 0x4a0095b8, + .cm_l4sec_rng_clkctrl = 0x4a0095c0, + .cm_l4sec_sha2md51_clkctrl = 0x4a0095c8, + .cm_l4sec_cryptodma_clkctrl = 0x4a0095d8, + + /* l4 wkup regs */ + .cm_abe_pll_ref_clksel = 0x4a30610c, + .cm_sys_clksel = 0x4a306110, + .cm_wkup_clkstctrl = 0x4a307800, + .cm_wkup_l4wkup_clkctrl = 0x4a307820, + .cm_wkup_wdtimer1_clkctrl = 0x4a307828, + .cm_wkup_wdtimer2_clkctrl = 0x4a307830, + .cm_wkup_gpio1_clkctrl = 0x4a307838, + .cm_wkup_gptimer1_clkctrl = 0x4a307840, + .cm_wkup_gptimer12_clkctrl = 0x4a307848, + .cm_wkup_synctimer_clkctrl = 0x4a307850, + .cm_wkup_usim_clkctrl = 0x4a307858, + .cm_wkup_sarram_clkctrl = 0x4a307860, + .cm_wkup_keyboard_clkctrl = 0x4a307878, + .cm_wkup_rtc_clkctrl = 0x4a307880, + .cm_wkup_bandgap_clkctrl = 0x4a307888, + .prm_vc_val_bypass = 0x4a307ba0, + .prm_vc_cfg_channel = 0x4a307ba4, + .prm_vc_cfg_i2c_mode = 0x4a307ba8, + .prm_vc_cfg_i2c_clk = 0x4a307bac, +}; + +struct omap_sys_ctrl_regs const omap4_ctrl = { + .control_id_code = 0x4A002204, + .control_std_fuse_opp_bgap = 0x4a002260, + .control_status = 0x4a0022c4, + .control_ldosram_iva_voltage_ctrl = 0x4A002320, + .control_ldosram_mpu_voltage_ctrl = 0x4A002324, + .control_ldosram_core_voltage_ctrl = 0x4A002328, + .control_usbotghs_ctrl = 0x4A00233C, + .control_padconf_core_base = 0x4A100000, + .control_pbiaslite = 0x4A100600, + .control_lpddr2io1_0 = 0x4A100638, + .control_lpddr2io1_1 = 0x4A10063C, + .control_lpddr2io1_2 = 0x4A100640, + .control_lpddr2io1_3 = 0x4A100644, + .control_lpddr2io2_0 = 0x4A100648, + .control_lpddr2io2_1 = 0x4A10064C, + .control_lpddr2io2_2 = 0x4A100650, + .control_lpddr2io2_3 = 0x4A100654, + .control_efuse_1 = 0x4A100700, + .control_efuse_2 = 0x4A100704, + .control_padconf_wkup_base = 0x4A31E000, +}; diff --git a/arch/arm/cpu/armv7/omap4/sdram_elpida.c b/arch/arm/cpu/armv7/omap4/sdram_elpida.c new file mode 100644 index 0000000..20fc552 --- /dev/null +++ b/arch/arm/cpu/armv7/omap4/sdram_elpida.c @@ -0,0 +1,308 @@ +/* + * Timing and Organization details of the Elpida parts used in OMAP4 + * SDPs and Panda + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Aneesh V <aneesh@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/emif.h> +#include <asm/arch/sys_proto.h> + +/* + * This file provides details of the LPDDR2 SDRAM parts used on OMAP4430 + * SDP and Panda. Since the parts used and geometry are identical for + * SDP and Panda for a given OMAP4 revision, this information is kept + * here instead of being in board directory. However the key functions + * exported are weakly linked so that they can be over-ridden in the board + * directory if there is a OMAP4 board in the future that uses a different + * memory device or geometry. + * + * For any new board with different memory devices over-ride one or more + * of the following functions as per the CONFIG flags you intend to enable: + * - emif_get_reg_dump() + * - emif_get_dmm_regs() + * - emif_get_device_details() + * - emif_get_device_timings() + */ + +#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS + +static const struct emif_regs emif_regs_elpida_200_mhz_2cs = { + .sdram_config_init = 0x80000eb9, + .sdram_config = 0x80001ab9, + .ref_ctrl = 0x0000030c, + .sdram_tim1 = 0x08648311, + .sdram_tim2 = 0x101b06ca, + .sdram_tim3 = 0x0048a19f, + .read_idle_ctrl = 0x000501ff, + .zq_config = 0x500b3214, + .temp_alert_config = 0xd8016893, + .emif_ddr_phy_ctlr_1_init = 0x049ffff5, + .emif_ddr_phy_ctlr_1 = 0x049ff808 +}; + +static const struct emif_regs emif_regs_elpida_380_mhz_1cs = { + .sdram_config_init = 0x80000eb1, + .sdram_config = 0x80001ab1, + .ref_ctrl = 0x000005cd, + .sdram_tim1 = 0x10cb0622, + .sdram_tim2 = 0x20350d52, + .sdram_tim3 = 0x00b1431f, + .read_idle_ctrl = 0x000501ff, + .zq_config = 0x500b3214, + .temp_alert_config = 0x58016893, + .emif_ddr_phy_ctlr_1_init = 0x049ffff5, + .emif_ddr_phy_ctlr_1 = 0x049ff418 +}; + +const struct emif_regs emif_regs_elpida_400_mhz_2cs = { + .sdram_config_init = 0x80000eb9, + .sdram_config = 0x80001ab9, + .ref_ctrl = 0x00000618, + .sdram_tim1 = 0x10eb0662, + .sdram_tim2 = 0x20370dd2, + .sdram_tim3 = 0x00b1c33f, + .read_idle_ctrl = 0x000501ff, + .zq_config = 0xd00b3214, + .temp_alert_config = 0xd8016893, + .emif_ddr_phy_ctlr_1_init = 0x049ffff5, + .emif_ddr_phy_ctlr_1 = 0x049ff418 +}; + +const struct dmm_lisa_map_regs lisa_map_2G_x_1_x_2 = { + .dmm_lisa_map_0 = 0xFF020100, + .dmm_lisa_map_1 = 0, + .dmm_lisa_map_2 = 0, + .dmm_lisa_map_3 = 0x80540300, + .is_ma_present = 0x0 +}; + +const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2 = { + .dmm_lisa_map_0 = 0xFF020100, + .dmm_lisa_map_1 = 0, + .dmm_lisa_map_2 = 0, + .dmm_lisa_map_3 = 0x80640300, + .is_ma_present = 0x0 +}; + +const struct dmm_lisa_map_regs ma_lisa_map_2G_x_2_x_2 = { + .dmm_lisa_map_0 = 0xFF020100, + .dmm_lisa_map_1 = 0, + .dmm_lisa_map_2 = 0, + .dmm_lisa_map_3 = 0x80640300, + .is_ma_present = 0x1 +}; + +static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs) +{ + u32 omap4_rev = omap_revision(); + + /* Same devices and geometry on both EMIFs */ + if (omap4_rev == OMAP4430_ES1_0) + *regs = &emif_regs_elpida_380_mhz_1cs; + else if (omap4_rev == OMAP4430_ES2_0) + *regs = &emif_regs_elpida_200_mhz_2cs; + else + *regs = &emif_regs_elpida_400_mhz_2cs; +} +void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs) + __attribute__((weak, alias("emif_get_reg_dump_sdp"))); + +static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs + **dmm_lisa_regs) +{ + u32 omap_rev = omap_revision(); + + if (omap_rev == OMAP4430_ES1_0) + *dmm_lisa_regs = &lisa_map_2G_x_1_x_2; + else if (omap_rev < OMAP4460_ES1_0) + *dmm_lisa_regs = &lisa_map_2G_x_2_x_2; + else + *dmm_lisa_regs = &ma_lisa_map_2G_x_2_x_2; +} + +void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs) + __attribute__((weak, alias("emif_get_dmm_regs_sdp"))); + +#else + +static const struct lpddr2_device_details elpida_2G_S4_details = { + .type = LPDDR2_TYPE_S4, + .density = LPDDR2_DENSITY_2Gb, + .io_width = LPDDR2_IO_WIDTH_32, + .manufacturer = LPDDR2_MANUFACTURER_ELPIDA +}; + +struct lpddr2_device_details *emif_get_device_details_sdp(u32 emif_nr, u8 cs, + struct lpddr2_device_details *lpddr2_dev_details) +{ + u32 omap_rev = omap_revision(); + + /* EMIF1 & EMIF2 have identical configuration */ + if ((omap_rev == OMAP4430_ES1_0) && (cs == CS1)) { + /* Nothing connected on CS1 for ES1.0 */ + return NULL; + } else { + /* In all other cases Elpida 2G device */ + *lpddr2_dev_details = elpida_2G_S4_details; + return lpddr2_dev_details; + } +} + +struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs, + struct lpddr2_device_details *lpddr2_dev_details) + __attribute__((weak, alias("emif_get_device_details_sdp"))); + +#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */ + +#ifndef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS +static const struct lpddr2_ac_timings timings_elpida_400_mhz = { + .max_freq = 400000000, + .RL = 6, + .tRPab = 21, + .tRCD = 18, + .tWR = 15, + .tRASmin = 42, + .tRRD = 10, + .tWTRx2 = 15, + .tXSR = 140, + .tXPx2 = 15, + .tRFCab = 130, + .tRTPx2 = 15, + .tCKE = 3, + .tCKESR = 15, + .tZQCS = 90, + .tZQCL = 360, + .tZQINIT = 1000, + .tDQSCKMAXx2 = 11, + .tRASmax = 70, + .tFAW = 50 +}; + +static const struct lpddr2_ac_timings timings_elpida_333_mhz = { + .max_freq = 333000000, + .RL = 5, + .tRPab = 21, + .tRCD = 18, + .tWR = 15, + .tRASmin = 42, + .tRRD = 10, + .tWTRx2 = 15, + .tXSR = 140, + .tXPx2 = 15, + .tRFCab = 130, + .tRTPx2 = 15, + .tCKE = 3, + .tCKESR = 15, + .tZQCS = 90, + .tZQCL = 360, + .tZQINIT = 1000, + .tDQSCKMAXx2 = 11, + .tRASmax = 70, + .tFAW = 50 +}; + +static const struct lpddr2_ac_timings timings_elpida_200_mhz = { + .max_freq = 200000000, + .RL = 3, + .tRPab = 21, + .tRCD = 18, + .tWR = 15, + .tRASmin = 42, + .tRRD = 10, + .tWTRx2 = 20, + .tXSR = 140, + .tXPx2 = 15, + .tRFCab = 130, + .tRTPx2 = 15, + .tCKE = 3, + .tCKESR = 15, + .tZQCS = 90, + .tZQCL = 360, + .tZQINIT = 1000, + .tDQSCKMAXx2 = 11, + .tRASmax = 70, + .tFAW = 50 +}; + +static const struct lpddr2_min_tck min_tck_elpida = { + .tRL = 3, + .tRP_AB = 3, + .tRCD = 3, + .tWR = 3, + .tRAS_MIN = 3, + .tRRD = 2, + .tWTR = 2, + .tXP = 2, + .tRTP = 2, + .tCKE = 3, + .tCKESR = 3, + .tFAW = 8 +}; + +static const struct lpddr2_ac_timings *elpida_ac_timings[MAX_NUM_SPEEDBINS] = { + &timings_elpida_200_mhz, + &timings_elpida_333_mhz, + &timings_elpida_400_mhz +}; + +static const struct lpddr2_device_timings elpida_2G_S4_timings = { + .ac_timings = elpida_ac_timings, + .min_tck = &min_tck_elpida, +}; + +void emif_get_device_timings_sdp(u32 emif_nr, + const struct lpddr2_device_timings **cs0_device_timings, + const struct lpddr2_device_timings **cs1_device_timings) +{ + u32 omap_rev = omap_revision(); + + /* Identical devices on EMIF1 & EMIF2 */ + *cs0_device_timings = &elpida_2G_S4_timings; + + if (omap_rev == OMAP4430_ES1_0) + *cs1_device_timings = NULL; + else + *cs1_device_timings = &elpida_2G_S4_timings; +} + +void emif_get_device_timings(u32 emif_nr, + const struct lpddr2_device_timings **cs0_device_timings, + const struct lpddr2_device_timings **cs1_device_timings) + __attribute__((weak, alias("emif_get_device_timings_sdp"))); + +#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */ + +const struct lpddr2_mr_regs mr_regs = { + .mr1 = MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3, + .mr2 = 0x4, + .mr3 = -1, + .mr10 = MR10_ZQ_ZQINIT, + .mr16 = MR16_REF_FULL_ARRAY +}; + +void get_lpddr2_mr_regs(const struct lpddr2_mr_regs **regs) +{ + *regs = &mr_regs; +} diff --git a/arch/arm/cpu/armv7/omap5/Makefile b/arch/arm/cpu/armv7/omap5/Makefile new file mode 100644 index 0000000..6ff8dbb --- /dev/null +++ b/arch/arm/cpu/armv7/omap5/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2000-2010 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS += hwinit.o +COBJS += emif.o +COBJS += sdram.o +COBJS += prcm-regs.o +COBJS += hw_data.o +COBJS += abb.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/omap5/abb.c b/arch/arm/cpu/armv7/omap5/abb.c new file mode 100644 index 0000000..92470be --- /dev/null +++ b/arch/arm/cpu/armv7/omap5/abb.c @@ -0,0 +1,67 @@ +/* + * + * Adaptive Body Bias programming sequence for OMAP5 family + * + * (C) Copyright 2013 + * Texas Instruments, <www.ti.com> + * + * Andrii Tseglytskyi <andrii.tseglytskyi@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/omap_common.h> +#include <asm/io.h> + +/* + * Setup LDOVBB for OMAP5. + * On OMAP5+ some ABB settings are fused. They are handled + * in the following way: + * + * 1. corresponding EFUSE register contains ABB enable bit + * and VSET value + * 2. If ABB enable bit is set to 1, than ABB should be + * enabled, otherwise ABB should be disabled + * 3. If ABB is enabled, than VSET value should be copied + * to corresponding MUX control register + */ +s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb) +{ + u32 vset; + + /* + * ABB parameters must be properly fused + * otherwise ABB should be disabled + */ + vset = readl(fuse); + if (!(vset & OMAP5_ABB_FUSE_ENABLE_MASK)) + return -1; + + /* prepare VSET value for LDOVBB mux register */ + vset &= OMAP5_ABB_FUSE_VSET_MASK; + vset >>= ffs(OMAP5_ABB_FUSE_VSET_MASK) - 1; + vset <<= ffs(OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK) - 1; + vset |= OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK; + + /* setup LDOVBB using fused value */ + clrsetbits_le32(ldovbb, OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK, vset); + + return 0; +} diff --git a/arch/arm/cpu/armv7/omap5/config.mk b/arch/arm/cpu/armv7/omap5/config.mk new file mode 100644 index 0000000..639f699 --- /dev/null +++ b/arch/arm/cpu/armv7/omap5/config.mk @@ -0,0 +1,28 @@ +# +# Copyright 2011 Linaro Limited +# See file CREDITS for list of people who contributed to this +# project. +# +# Aneesh V <annesh@ti.com> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +ifdef CONFIG_SPL_BUILD +ALL-y += $(OBJTREE)/MLO +else +ALL-y += $(obj)u-boot.img +endif diff --git a/arch/arm/cpu/armv7/omap5/emif.c b/arch/arm/cpu/armv7/omap5/emif.c new file mode 100644 index 0000000..b4c1319 --- /dev/null +++ b/arch/arm/cpu/armv7/omap5/emif.c @@ -0,0 +1,104 @@ +/* + * EMIF programming + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Aneesh V <aneesh@ti.com> for OMAP4 + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/emif.h> +#include <asm/arch/sys_proto.h> +#include <asm/utils.h> + +#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS +#define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg)) +static u32 *const T_num = (u32 *)OMAP_SRAM_SCRATCH_EMIF_T_NUM; +static u32 *const T_den = (u32 *)OMAP_SRAM_SCRATCH_EMIF_T_DEN; +#endif + +#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS +/* Base AC Timing values specified by JESD209-2 for 532MHz operation */ +static const struct lpddr2_ac_timings timings_jedec_532_mhz = { + .max_freq = 532000000, + .RL = 8, + .tRPab = 21, + .tRCD = 18, + .tWR = 15, + .tRASmin = 42, + .tRRD = 10, + .tWTRx2 = 15, + .tXSR = 140, + .tXPx2 = 15, + .tRFCab = 130, + .tRTPx2 = 15, + .tCKE = 3, + .tCKESR = 15, + .tZQCS = 90, + .tZQCL = 360, + .tZQINIT = 1000, + .tDQSCKMAXx2 = 11, + .tRASmax = 70, + .tFAW = 50 +}; + +/* + * Min tCK values specified by JESD209-2 + * Min tCK specifies the minimum duration of some AC timing parameters in terms + * of the number of cycles. If the calculated number of cycles based on the + * absolute time value is less than the min tCK value, min tCK value should + * be used instead. This typically happens at low frequencies. + */ +static const struct lpddr2_min_tck min_tck_jedec = { + .tRL = 3, + .tRP_AB = 3, + .tRCD = 3, + .tWR = 3, + .tRAS_MIN = 3, + .tRRD = 2, + .tWTR = 2, + .tXP = 2, + .tRTP = 2, + .tCKE = 3, + .tCKESR = 3, + .tFAW = 8 +}; + +static const struct lpddr2_ac_timings const* + jedec_ac_timings[MAX_NUM_SPEEDBINS] = { + &timings_jedec_532_mhz +}; + +static const struct lpddr2_device_timings jedec_default_timings = { + .ac_timings = jedec_ac_timings, + .min_tck = &min_tck_jedec +}; + +void emif_get_device_timings(u32 emif_nr, + const struct lpddr2_device_timings **cs0_device_timings, + const struct lpddr2_device_timings **cs1_device_timings) +{ + /* Assume Identical devices on EMIF1 & EMIF2 */ + *cs0_device_timings = &jedec_default_timings; + *cs1_device_timings = NULL; +} +#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */ diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c new file mode 100644 index 0000000..07b1108 --- /dev/null +++ b/arch/arm/cpu/armv7/omap5/hw_data.c @@ -0,0 +1,674 @@ +/* + * + * HW data initialization for OMAP5 + * + * (C) Copyright 2013 + * Texas Instruments, <www.ti.com> + * + * Sricharan R <r.sricharan@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <palmas.h> +#include <asm/arch/omap.h> +#include <asm/arch/sys_proto.h> +#include <asm/omap_common.h> +#include <asm/arch/clock.h> +#include <asm/omap_gpio.h> +#include <asm/io.h> +#include <asm/emif.h> + +struct prcm_regs const **prcm = + (struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR; +struct dplls const **dplls_data = + (struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR; +struct vcores_data const **omap_vcores = + (struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR; +struct omap_sys_ctrl_regs const **ctrl = + (struct omap_sys_ctrl_regs const **)OMAP_SRAM_SCRATCH_SYS_CTRL; + +/* OPP HIGH FREQUENCY for ES2.0 */ +static const struct dpll_params mpu_dpll_params_1_5ghz[NUM_SYS_CLKS] = { + {125, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {625, 6, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {625, 7, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {750, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {625, 15, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* OPP NOM FREQUENCY for ES2.0, OPP HIGH for ES1.0 */ +static const struct dpll_params mpu_dpll_params_1100mhz[NUM_SYS_CLKS] = { + {275, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {1375, 20, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {1375, 23, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {550, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {1375, 47, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* OPP NOM FREQUENCY for ES1.0 */ +static const struct dpll_params mpu_dpll_params_800mhz[NUM_SYS_CLKS] = { + {200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {1000, 20, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {375, 8, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {400, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {375, 17, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* OPP LOW FREQUENCY for ES1.0 */ +static const struct dpll_params mpu_dpll_params_400mhz[NUM_SYS_CLKS] = { + {200, 2, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {1000, 20, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {375, 8, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {400, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {375, 17, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* OPP LOW FREQUENCY for ES2.0 */ +static const struct dpll_params mpu_dpll_params_499mhz[NUM_SYS_CLKS] = { + {499, 11, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {297, 9, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {493, 18, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {499, 25, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {493, 37, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params mpu_dpll_params_1ghz[NUM_SYS_CLKS] = { + {250, 2, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {500, 9, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */ + {119, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {625, 11, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {500, 12, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {625, 23, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ +}; + +static const struct dpll_params + core_dpll_params_2128mhz_ddr532[NUM_SYS_CLKS] = { + {266, 2, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {443, 6, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 16.8 MHz */ + {277, 4, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 19.2 MHz */ + {368, 8, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {277, 9, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params + core_dpll_params_2128mhz_ddr532_es2[NUM_SYS_CLKS] = { + {266, 2, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {443, 6, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 16.8 MHz */ + {277, 4, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 19.2 MHz */ + {368, 8, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {277, 9, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6} /* 38.4 MHz */ +}; + +static const struct dpll_params + core_dpll_params_2128mhz_dra7xx[NUM_SYS_CLKS] = { + {266, 2, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 12 MHz */ + {266, 4, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 20 MHz */ + {443, 6, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 16.8 MHz */ + {277, 4, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 19.2 MHz */ + {368, 8, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {277, 9, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 38.4 MHz */ +}; + +static const struct dpll_params + core_dpll_params_2128mhz_ddr266[NUM_SYS_CLKS] = { + {266, 2, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {443, 6, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 16.8 MHz */ + {277, 4, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 19.2 MHz */ + {368, 8, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {277, 9, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params + core_dpll_params_2128mhz_ddr266_es2[NUM_SYS_CLKS] = { + {266, 2, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {443, 6, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 16.8 MHz */ + {277, 4, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 19.2 MHz */ + {368, 8, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {277, 9, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12} /* 38.4 MHz */ +}; + +static const struct dpll_params per_dpll_params_768mhz[NUM_SYS_CLKS] = { + {32, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {160, 6, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 16.8 MHz */ + {20, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 19.2 MHz */ + {192, 12, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {10, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params per_dpll_params_768mhz_es2[NUM_SYS_CLKS] = { + {32, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {160, 6, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 16.8 MHz */ + {20, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 19.2 MHz */ + {192, 12, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {10, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params per_dpll_params_768mhz_dra7xx[NUM_SYS_CLKS] = { + {32, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 12 MHz */ + {96, 4, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 20 MHz */ + {160, 6, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 16.8 MHz */ + {20, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 19.2 MHz */ + {192, 12, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {10, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 38.4 MHz */ +}; + +static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = { + {1165, 11, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {208, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {182, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {224, 4, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {91, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params iva_dpll_params_2330mhz_dra7xx[NUM_SYS_CLKS] = { + {1165, 11, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {233, 3, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */ + {208, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {182, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {224, 4, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {91, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ +}; + +/* ABE M & N values with sys_clk as source */ +static const struct dpll_params + abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = { + {49, 5, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {35, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {46, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {34, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {64, 24, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* ABE M & N values with 32K clock as source */ +static const struct dpll_params abe_dpll_params_32k_196608khz = { + 750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1 +}; + +/* ABE M & N values with sysclk2(22.5792 MHz) as input */ +static const struct dpll_params + abe_dpll_params_sysclk2_361267khz[NUM_SYS_CLKS] = { + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {16, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ +}; + +static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = { + {400, 4, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {480, 9, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */ + {400, 6, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {400, 7, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {480, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {400, 15, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ +}; + +static const struct dpll_params ddr_dpll_params_2128mhz[NUM_SYS_CLKS] = { + {266, 2, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {266, 4, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */ + {190, 2, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {665, 11, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {532, 12, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {665, 23, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ +}; + +struct dplls omap5_dplls_es1 = { + .mpu = mpu_dpll_params_800mhz, + .core = core_dpll_params_2128mhz_ddr532, + .per = per_dpll_params_768mhz, + .iva = iva_dpll_params_2330mhz, +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + .abe = abe_dpll_params_sysclk_196608khz, +#else + .abe = &abe_dpll_params_32k_196608khz, +#endif + .usb = usb_dpll_params_1920mhz, + .ddr = NULL +}; + +struct dplls omap5_dplls_es2 = { + .mpu = mpu_dpll_params_1100mhz, + .core = core_dpll_params_2128mhz_ddr532_es2, + .per = per_dpll_params_768mhz_es2, + .iva = iva_dpll_params_2330mhz, +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + .abe = abe_dpll_params_sysclk_196608khz, +#else + .abe = &abe_dpll_params_32k_196608khz, +#endif + .usb = usb_dpll_params_1920mhz, + .ddr = NULL +}; + +struct dplls dra7xx_dplls = { + .mpu = mpu_dpll_params_1ghz, + .core = core_dpll_params_2128mhz_dra7xx, + .per = per_dpll_params_768mhz_dra7xx, + .abe = abe_dpll_params_sysclk2_361267khz, + .iva = iva_dpll_params_2330mhz_dra7xx, + .usb = usb_dpll_params_1920mhz, + .ddr = ddr_dpll_params_2128mhz, +}; + +struct pmic_data palmas = { + .base_offset = PALMAS_SMPS_BASE_VOLT_UV, + .step = 10000, /* 10 mV represented in uV */ + /* + * Offset codes 1-6 all give the base voltage in Palmas + * Offset code 0 switches OFF the SMPS + */ + .start_code = 6, + .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR, + .pmic_bus_init = sri2c_init, + .pmic_write = omap_vc_bypass_send_value, +}; + +struct pmic_data tps659038 = { + .base_offset = PALMAS_SMPS_BASE_VOLT_UV, + .step = 10000, /* 10 mV represented in uV */ + /* + * Offset codes 1-6 all give the base voltage in Palmas + * Offset code 0 switches OFF the SMPS + */ + .start_code = 6, + .i2c_slave_addr = TPS659038_I2C_SLAVE_ADDR, + .pmic_bus_init = gpi2c_init, + .pmic_write = palmas_i2c_write_u8, +}; + +struct vcores_data omap5430_volts = { + .mpu.value = VDD_MPU, + .mpu.addr = SMPS_REG_ADDR_12_MPU, + .mpu.pmic = &palmas, + + .core.value = VDD_CORE, + .core.addr = SMPS_REG_ADDR_8_CORE, + .core.pmic = &palmas, + + .mm.value = VDD_MM, + .mm.addr = SMPS_REG_ADDR_45_IVA, + .mm.pmic = &palmas, +}; + +struct vcores_data omap5430_volts_es2 = { + .mpu.value = VDD_MPU_ES2, + .mpu.addr = SMPS_REG_ADDR_12_MPU, + .mpu.pmic = &palmas, + + .core.value = VDD_CORE_ES2, + .core.addr = SMPS_REG_ADDR_8_CORE, + .core.pmic = &palmas, + + .mm.value = VDD_MM_ES2, + .mm.addr = SMPS_REG_ADDR_45_IVA, + .mm.pmic = &palmas, +}; + +struct vcores_data dra752_volts = { + .mpu.value = VDD_MPU_DRA752, + .mpu.efuse.reg = STD_FUSE_OPP_VMIN_MPU_NOM, + .mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .mpu.addr = TPS659038_REG_ADDR_SMPS12_MPU, + .mpu.pmic = &tps659038, + + .eve.value = VDD_EVE_DRA752, + .eve.efuse.reg = STD_FUSE_OPP_VMIN_DSPEVE_NOM, + .eve.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .eve.addr = TPS659038_REG_ADDR_SMPS45_EVE, + .eve.pmic = &tps659038, + + .gpu.value = VDD_GPU_DRA752, + .gpu.efuse.reg = STD_FUSE_OPP_VMIN_GPU_NOM, + .gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .gpu.addr = TPS659038_REG_ADDR_SMPS6_GPU, + .gpu.pmic = &tps659038, + + .core.value = VDD_CORE_DRA752, + .core.efuse.reg = STD_FUSE_OPP_VMIN_CORE_NOM, + .core.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .core.addr = TPS659038_REG_ADDR_SMPS7_CORE, + .core.pmic = &tps659038, + + .iva.value = VDD_IVA_DRA752, + .iva.efuse.reg = STD_FUSE_OPP_VMIN_IVA_NOM, + .iva.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .iva.addr = TPS659038_REG_ADDR_SMPS8_IVA, + .iva.pmic = &tps659038, +}; + +/* + * Enable essential clock domains, modules and + * do some additional special settings needed + */ +void enable_basic_clocks(void) +{ + u32 const clk_domains_essential[] = { + (*prcm)->cm_l4per_clkstctrl, + (*prcm)->cm_l3init_clkstctrl, + (*prcm)->cm_memif_clkstctrl, + (*prcm)->cm_l4cfg_clkstctrl, + 0 + }; + + u32 const clk_modules_hw_auto_essential[] = { + (*prcm)->cm_l3_gpmc_clkctrl, + (*prcm)->cm_memif_emif_1_clkctrl, + (*prcm)->cm_memif_emif_2_clkctrl, + (*prcm)->cm_l4cfg_l4_cfg_clkctrl, + (*prcm)->cm_wkup_gpio1_clkctrl, + (*prcm)->cm_l4per_gpio2_clkctrl, + (*prcm)->cm_l4per_gpio3_clkctrl, + (*prcm)->cm_l4per_gpio4_clkctrl, + (*prcm)->cm_l4per_gpio5_clkctrl, + (*prcm)->cm_l4per_gpio6_clkctrl, + (*prcm)->cm_l4per_gpio7_clkctrl, + (*prcm)->cm_l4per_gpio8_clkctrl, + 0 + }; + + u32 const clk_modules_explicit_en_essential[] = { + (*prcm)->cm_wkup_gptimer1_clkctrl, + (*prcm)->cm_l3init_hsmmc1_clkctrl, + (*prcm)->cm_l3init_hsmmc2_clkctrl, + (*prcm)->cm_l4per_gptimer2_clkctrl, + (*prcm)->cm_wkup_wdtimer2_clkctrl, + (*prcm)->cm_l4per_uart3_clkctrl, + (*prcm)->cm_l4per_i2c1_clkctrl, + 0 + }; + + /* Enable optional additional functional clock for GPIO4 */ + setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl, + GPIO4_CLKCTRL_OPTFCLKEN_MASK); + + /* Enable 96 MHz clock for MMC1 & MMC2 */ + setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl, + HSMMC_CLKCTRL_CLKSEL_MASK); + setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl, + HSMMC_CLKCTRL_CLKSEL_MASK); + + /* Set the correct clock dividers for mmc */ + setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl, + HSMMC_CLKCTRL_CLKSEL_DIV_MASK); + setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl, + HSMMC_CLKCTRL_CLKSEL_DIV_MASK); + + /* Select 32KHz clock as the source of GPTIMER1 */ + setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl, + GPTIMER1_CLKCTRL_CLKSEL_MASK); + + do_enable_clocks(clk_domains_essential, + clk_modules_hw_auto_essential, + clk_modules_explicit_en_essential, + 1); + + /* Enable SCRM OPT clocks for PER and CORE dpll */ + setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl, + OPTFCLKEN_SCRM_PER_MASK); + setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl, + OPTFCLKEN_SCRM_CORE_MASK); +} + +void enable_basic_uboot_clocks(void) +{ + u32 const clk_domains_essential[] = { + 0 + }; + + u32 const clk_modules_hw_auto_essential[] = { + (*prcm)->cm_l3init_hsusbtll_clkctrl, + 0 + }; + + u32 const clk_modules_explicit_en_essential[] = { + (*prcm)->cm_l4per_mcspi1_clkctrl, + (*prcm)->cm_l4per_i2c2_clkctrl, + (*prcm)->cm_l4per_i2c3_clkctrl, + (*prcm)->cm_l4per_i2c4_clkctrl, + (*prcm)->cm_l4per_i2c5_clkctrl, + (*prcm)->cm_l3init_hsusbhost_clkctrl, + (*prcm)->cm_l3init_fsusb_clkctrl, + 0 + }; + + do_enable_clocks(clk_domains_essential, + clk_modules_hw_auto_essential, + clk_modules_explicit_en_essential, + 1); +} + +/* + * Enable non-essential clock domains, modules and + * do some additional special settings needed + */ +void enable_non_essential_clocks(void) +{ + u32 const clk_domains_non_essential[] = { + (*prcm)->cm_mpu_m3_clkstctrl, + (*prcm)->cm_ivahd_clkstctrl, + (*prcm)->cm_dsp_clkstctrl, + (*prcm)->cm_dss_clkstctrl, + (*prcm)->cm_sgx_clkstctrl, + (*prcm)->cm1_abe_clkstctrl, + (*prcm)->cm_c2c_clkstctrl, + (*prcm)->cm_cam_clkstctrl, + (*prcm)->cm_dss_clkstctrl, + (*prcm)->cm_sdma_clkstctrl, + 0 + }; + + u32 const clk_modules_hw_auto_non_essential[] = { + (*prcm)->cm_mpu_m3_mpu_m3_clkctrl, + (*prcm)->cm_ivahd_ivahd_clkctrl, + (*prcm)->cm_ivahd_sl2_clkctrl, + (*prcm)->cm_dsp_dsp_clkctrl, + (*prcm)->cm_l3instr_l3_3_clkctrl, + (*prcm)->cm_l3instr_l3_instr_clkctrl, + (*prcm)->cm_l3instr_intrconn_wp1_clkctrl, + (*prcm)->cm_l3init_hsi_clkctrl, + (*prcm)->cm_l4per_hdq1w_clkctrl, + 0 + }; + + u32 const clk_modules_explicit_en_non_essential[] = { + (*prcm)->cm1_abe_aess_clkctrl, + (*prcm)->cm1_abe_pdm_clkctrl, + (*prcm)->cm1_abe_dmic_clkctrl, + (*prcm)->cm1_abe_mcasp_clkctrl, + (*prcm)->cm1_abe_mcbsp1_clkctrl, + (*prcm)->cm1_abe_mcbsp2_clkctrl, + (*prcm)->cm1_abe_mcbsp3_clkctrl, + (*prcm)->cm1_abe_slimbus_clkctrl, + (*prcm)->cm1_abe_timer5_clkctrl, + (*prcm)->cm1_abe_timer6_clkctrl, + (*prcm)->cm1_abe_timer7_clkctrl, + (*prcm)->cm1_abe_timer8_clkctrl, + (*prcm)->cm1_abe_wdt3_clkctrl, + (*prcm)->cm_l4per_gptimer9_clkctrl, + (*prcm)->cm_l4per_gptimer10_clkctrl, + (*prcm)->cm_l4per_gptimer11_clkctrl, + (*prcm)->cm_l4per_gptimer3_clkctrl, + (*prcm)->cm_l4per_gptimer4_clkctrl, + (*prcm)->cm_l4per_mcspi2_clkctrl, + (*prcm)->cm_l4per_mcspi3_clkctrl, + (*prcm)->cm_l4per_mcspi4_clkctrl, + (*prcm)->cm_l4per_mmcsd3_clkctrl, + (*prcm)->cm_l4per_mmcsd4_clkctrl, + (*prcm)->cm_l4per_mmcsd5_clkctrl, + (*prcm)->cm_l4per_uart1_clkctrl, + (*prcm)->cm_l4per_uart2_clkctrl, + (*prcm)->cm_l4per_uart4_clkctrl, + (*prcm)->cm_wkup_keyboard_clkctrl, + (*prcm)->cm_wkup_wdtimer2_clkctrl, + (*prcm)->cm_cam_iss_clkctrl, + (*prcm)->cm_cam_fdif_clkctrl, + (*prcm)->cm_dss_dss_clkctrl, + (*prcm)->cm_sgx_sgx_clkctrl, + 0 + }; + + /* Enable optional functional clock for ISS */ + setbits_le32((*prcm)->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK); + + /* Enable all optional functional clocks of DSS */ + setbits_le32((*prcm)->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK); + + do_enable_clocks(clk_domains_non_essential, + clk_modules_hw_auto_non_essential, + clk_modules_explicit_en_non_essential, + 0); + + /* Put camera module in no sleep mode */ + clrsetbits_le32((*prcm)->cm_cam_clkstctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + CD_CLKCTRL_CLKTRCTRL_NO_SLEEP << + MODULE_CLKCTRL_MODULEMODE_SHIFT); +} + +const struct ctrl_ioregs ioregs_omap5430 = { + .ctrl_ddrch = DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, + .ctrl_lpddr2ch = DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN, + .ctrl_ddrio_0 = DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL, + .ctrl_ddrio_1 = DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL, + .ctrl_ddrio_2 = DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL, +}; + +const struct ctrl_ioregs ioregs_omap5432_es1 = { + .ctrl_ddrch = DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, + .ctrl_lpddr2ch = 0x0, + .ctrl_ddr3ch = DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL, + .ctrl_ddrio_0 = DDR_IO_0_VREF_CELLS_DDR3_VALUE, + .ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE, + .ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE, + .ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES, +}; + +const struct ctrl_ioregs ioregs_omap5432_es2 = { + .ctrl_ddrch = DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2, + .ctrl_lpddr2ch = 0x0, + .ctrl_ddr3ch = DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2, + .ctrl_ddrio_0 = DDR_IO_0_VREF_CELLS_DDR3_VALUE_ES2, + .ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE_ES2, + .ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE_ES2, + .ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES, +}; + +const struct ctrl_ioregs ioregs_dra7xx_es1 = { + .ctrl_ddrch = 0x40404040, + .ctrl_lpddr2ch = 0x40404040, + .ctrl_ddr3ch = 0x80808080, + .ctrl_ddrio_0 = 0xbae8c631, + .ctrl_ddrio_1 = 0xb46318d8, + .ctrl_ddrio_2 = 0x84210000, + .ctrl_emif_sdram_config_ext = 0xb2c00000, + .ctrl_ddr_ctrl_ext_0 = 0xA2000000, +}; + +void hw_data_init(void) +{ + u32 omap_rev = omap_revision(); + + switch (omap_rev) { + + case OMAP5430_ES1_0: + case OMAP5432_ES1_0: + *prcm = &omap5_es1_prcm; + *dplls_data = &omap5_dplls_es1; + *omap_vcores = &omap5430_volts; + *ctrl = &omap5_ctrl; + break; + + case OMAP5430_ES2_0: + case OMAP5432_ES2_0: + *prcm = &omap5_es2_prcm; + *dplls_data = &omap5_dplls_es2; + *omap_vcores = &omap5430_volts_es2; + *ctrl = &omap5_ctrl; + break; + + case DRA752_ES1_0: + *prcm = &dra7xx_prcm; + *dplls_data = &dra7xx_dplls; + *omap_vcores = &dra752_volts; + *ctrl = &dra7xx_ctrl; + break; + + default: + printf("\n INVALID OMAP REVISION "); + } +} + +void get_ioregs(const struct ctrl_ioregs **regs) +{ + u32 omap_rev = omap_revision(); + + switch (omap_rev) { + case OMAP5430_ES1_0: + case OMAP5430_ES2_0: + *regs = &ioregs_omap5430; + break; + case OMAP5432_ES1_0: + *regs = &ioregs_omap5432_es1; + break; + case OMAP5432_ES2_0: + *regs = &ioregs_omap5432_es2; + break; + case DRA752_ES1_0: + *regs = &ioregs_dra7xx_es1; + break; + + default: + printf("\n INVALID OMAP REVISION "); + } +} diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c new file mode 100644 index 0000000..11ba36b --- /dev/null +++ b/arch/arm/cpu/armv7/omap5/hwinit.c @@ -0,0 +1,395 @@ +/* + * + * Functions for omap5 based boards. + * + * (C) Copyright 2011 + * Texas Instruments, <www.ti.com> + * + * Author : + * Aneesh V <aneesh@ti.com> + * Steve Sakoman <steve@sakoman.com> + * Sricharan <r.sricharan@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/armv7.h> +#include <asm/arch/cpu.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/clock.h> +#include <asm/sizes.h> +#include <asm/utils.h> +#include <asm/arch/gpio.h> +#include <asm/emif.h> +#include <asm/omap_common.h> + +DECLARE_GLOBAL_DATA_PTR; + +u32 *const omap_si_rev = (u32 *)OMAP_SRAM_SCRATCH_OMAP_REV; + +static struct gpio_bank gpio_bank_54xx[8] = { + { (void *)OMAP54XX_GPIO1_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP54XX_GPIO2_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP54XX_GPIO3_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP54XX_GPIO4_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP54XX_GPIO5_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP54XX_GPIO6_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP54XX_GPIO7_BASE, METHOD_GPIO_24XX }, + { (void *)OMAP54XX_GPIO8_BASE, METHOD_GPIO_24XX }, +}; + +const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx; + +#ifdef CONFIG_SPL_BUILD +/* LPDDR2 specific IO settings */ +static void io_settings_lpddr2(void) +{ + const struct ctrl_ioregs *ioregs; + + get_ioregs(&ioregs); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_1); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_1); + writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_0); + writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_1); + writel(ioregs->ctrl_ddrio_0, (*ctrl)->control_ddrio_0); + writel(ioregs->ctrl_ddrio_1, (*ctrl)->control_ddrio_1); + writel(ioregs->ctrl_ddrio_2, (*ctrl)->control_ddrio_2); +} + +/* DDR3 specific IO settings */ +static void io_settings_ddr3(void) +{ + u32 io_settings = 0; + const struct ctrl_ioregs *ioregs; + + get_ioregs(&ioregs); + writel(ioregs->ctrl_ddr3ch, (*ctrl)->control_ddr3ch1_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_1); + + writel(ioregs->ctrl_ddr3ch, (*ctrl)->control_ddr3ch2_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_1); + + writel(ioregs->ctrl_ddrio_0, (*ctrl)->control_ddrio_0); + writel(ioregs->ctrl_ddrio_1, (*ctrl)->control_ddrio_1); + writel(ioregs->ctrl_ddrio_2, (*ctrl)->control_ddrio_2); + + /* omap5432 does not use lpddr2 */ + writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_0); + writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_1); + + writel(ioregs->ctrl_emif_sdram_config_ext, + (*ctrl)->control_emif1_sdram_config_ext); + writel(ioregs->ctrl_emif_sdram_config_ext, + (*ctrl)->control_emif2_sdram_config_ext); + + if (is_omap54xx()) { + /* Disable DLL select */ + io_settings = (readl((*ctrl)->control_port_emif1_sdram_config) + & 0xFFEFFFFF); + writel(io_settings, + (*ctrl)->control_port_emif1_sdram_config); + + io_settings = (readl((*ctrl)->control_port_emif2_sdram_config) + & 0xFFEFFFFF); + writel(io_settings, + (*ctrl)->control_port_emif2_sdram_config); + } else { + writel(ioregs->ctrl_ddr_ctrl_ext_0, + (*ctrl)->control_ddr_control_ext_0); + } +} + +/* + * Some tuning of IOs for optimal power and performance + */ +void do_io_settings(void) +{ + u32 io_settings = 0, mask = 0; + + /* Impedance settings EMMC, C2C 1,2, hsi2 */ + mask = (ds_mask << 2) | (ds_mask << 8) | + (ds_mask << 16) | (ds_mask << 18); + io_settings = readl((*ctrl)->control_smart1io_padconf_0) & + (~mask); + io_settings |= (ds_60_ohm << 8) | (ds_45_ohm << 16) | + (ds_45_ohm << 18) | (ds_60_ohm << 2); + writel(io_settings, (*ctrl)->control_smart1io_padconf_0); + + /* Impedance settings Mcspi2 */ + mask = (ds_mask << 30); + io_settings = readl((*ctrl)->control_smart1io_padconf_1) & + (~mask); + io_settings |= (ds_60_ohm << 30); + writel(io_settings, (*ctrl)->control_smart1io_padconf_1); + + /* Impedance settings C2C 3,4 */ + mask = (ds_mask << 14) | (ds_mask << 16); + io_settings = readl((*ctrl)->control_smart1io_padconf_2) & + (~mask); + io_settings |= (ds_45_ohm << 14) | (ds_45_ohm << 16); + writel(io_settings, (*ctrl)->control_smart1io_padconf_2); + + /* Slew rate settings EMMC, C2C 1,2 */ + mask = (sc_mask << 8) | (sc_mask << 16) | (sc_mask << 18); + io_settings = readl((*ctrl)->control_smart2io_padconf_0) & + (~mask); + io_settings |= (sc_fast << 8) | (sc_na << 16) | (sc_na << 18); + writel(io_settings, (*ctrl)->control_smart2io_padconf_0); + + /* Slew rate settings hsi2, Mcspi2 */ + mask = (sc_mask << 24) | (sc_mask << 28); + io_settings = readl((*ctrl)->control_smart2io_padconf_1) & + (~mask); + io_settings |= (sc_fast << 28) | (sc_fast << 24); + writel(io_settings, (*ctrl)->control_smart2io_padconf_1); + + /* Slew rate settings C2C 3,4 */ + mask = (sc_mask << 16) | (sc_mask << 18); + io_settings = readl((*ctrl)->control_smart2io_padconf_2) & + (~mask); + io_settings |= (sc_na << 16) | (sc_na << 18); + writel(io_settings, (*ctrl)->control_smart2io_padconf_2); + + /* impedance and slew rate settings for usb */ + mask = (usb_i_mask << 29) | (usb_i_mask << 26) | (usb_i_mask << 23) | + (usb_i_mask << 20) | (usb_i_mask << 17) | (usb_i_mask << 14); + io_settings = readl((*ctrl)->control_smart3io_padconf_1) & + (~mask); + io_settings |= (ds_60_ohm << 29) | (ds_60_ohm << 26) | + (ds_60_ohm << 23) | (sc_fast << 20) | + (sc_fast << 17) | (sc_fast << 14); + writel(io_settings, (*ctrl)->control_smart3io_padconf_1); + + if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2) + io_settings_lpddr2(); + else + io_settings_ddr3(); + + /* Efuse settings */ + writel(EFUSE_1, (*ctrl)->control_efuse_1); + writel(EFUSE_2, (*ctrl)->control_efuse_2); + writel(EFUSE_3, (*ctrl)->control_efuse_3); + writel(EFUSE_4, (*ctrl)->control_efuse_4); +} + +static const struct srcomp_params srcomp_parameters[NUM_SYS_CLKS] = { + {0x45, 0x1}, /* 12 MHz */ + {-1, -1}, /* 13 MHz */ + {0x63, 0x2}, /* 16.8 MHz */ + {0x57, 0x2}, /* 19.2 MHz */ + {0x20, 0x1}, /* 26 MHz */ + {-1, -1}, /* 27 MHz */ + {0x41, 0x3} /* 38.4 MHz */ +}; + +void srcomp_enable(void) +{ + u32 srcomp_value, mul_factor, div_factor, clk_val, i; + u32 sysclk_ind = get_sys_clk_index(); + u32 omap_rev = omap_revision(); + + if (!is_omap54xx()) + return; + + mul_factor = srcomp_parameters[sysclk_ind].multiply_factor; + div_factor = srcomp_parameters[sysclk_ind].divide_factor; + + for (i = 0; i < 4; i++) { + srcomp_value = readl((*ctrl)->control_srcomp_north_side + i*4); + srcomp_value &= + ~(MULTIPLY_FACTOR_XS_MASK | DIVIDE_FACTOR_XS_MASK); + srcomp_value |= (mul_factor << MULTIPLY_FACTOR_XS_SHIFT) | + (div_factor << DIVIDE_FACTOR_XS_SHIFT); + writel(srcomp_value, (*ctrl)->control_srcomp_north_side + i*4); + } + + if ((omap_rev == OMAP5430_ES1_0) || (omap_rev == OMAP5432_ES1_0)) { + clk_val = readl((*prcm)->cm_coreaon_io_srcomp_clkctrl); + clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK; + writel(clk_val, (*prcm)->cm_coreaon_io_srcomp_clkctrl); + + for (i = 0; i < 4; i++) { + srcomp_value = + readl((*ctrl)->control_srcomp_north_side + i*4); + srcomp_value &= ~PWRDWN_XS_MASK; + writel(srcomp_value, + (*ctrl)->control_srcomp_north_side + i*4); + + while (((readl((*ctrl)->control_srcomp_north_side + i*4) + & SRCODE_READ_XS_MASK) >> + SRCODE_READ_XS_SHIFT) == 0) + ; + + srcomp_value = + readl((*ctrl)->control_srcomp_north_side + i*4); + srcomp_value &= ~OVERRIDE_XS_MASK; + writel(srcomp_value, + (*ctrl)->control_srcomp_north_side + i*4); + } + } else { + srcomp_value = readl((*ctrl)->control_srcomp_east_side_wkup); + srcomp_value &= ~(MULTIPLY_FACTOR_XS_MASK | + DIVIDE_FACTOR_XS_MASK); + srcomp_value |= (mul_factor << MULTIPLY_FACTOR_XS_SHIFT) | + (div_factor << DIVIDE_FACTOR_XS_SHIFT); + writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup); + + for (i = 0; i < 4; i++) { + srcomp_value = + readl((*ctrl)->control_srcomp_north_side + i*4); + srcomp_value |= SRCODE_OVERRIDE_SEL_XS_MASK; + writel(srcomp_value, + (*ctrl)->control_srcomp_north_side + i*4); + + srcomp_value = + readl((*ctrl)->control_srcomp_north_side + i*4); + srcomp_value &= ~OVERRIDE_XS_MASK; + writel(srcomp_value, + (*ctrl)->control_srcomp_north_side + i*4); + } + + srcomp_value = + readl((*ctrl)->control_srcomp_east_side_wkup); + srcomp_value |= SRCODE_OVERRIDE_SEL_XS_MASK; + writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup); + + srcomp_value = + readl((*ctrl)->control_srcomp_east_side_wkup); + srcomp_value &= ~OVERRIDE_XS_MASK; + writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup); + + clk_val = readl((*prcm)->cm_coreaon_io_srcomp_clkctrl); + clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK; + writel(clk_val, (*prcm)->cm_coreaon_io_srcomp_clkctrl); + + clk_val = readl((*prcm)->cm_wkupaon_io_srcomp_clkctrl); + clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK; + writel(clk_val, (*prcm)->cm_wkupaon_io_srcomp_clkctrl); + + for (i = 0; i < 4; i++) { + while (((readl((*ctrl)->control_srcomp_north_side + i*4) + & SRCODE_READ_XS_MASK) >> + SRCODE_READ_XS_SHIFT) == 0) + ; + + srcomp_value = + readl((*ctrl)->control_srcomp_north_side + i*4); + srcomp_value &= ~SRCODE_OVERRIDE_SEL_XS_MASK; + writel(srcomp_value, + (*ctrl)->control_srcomp_north_side + i*4); + } + + while (((readl((*ctrl)->control_srcomp_east_side_wkup) & + SRCODE_READ_XS_MASK) >> SRCODE_READ_XS_SHIFT) == 0) + ; + + srcomp_value = + readl((*ctrl)->control_srcomp_east_side_wkup); + srcomp_value &= ~SRCODE_OVERRIDE_SEL_XS_MASK; + writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup); + } +} +#endif + +void config_data_eye_leveling_samples(u32 emif_base) +{ + /*EMIF_SDRAM_CONFIG_EXT-Read data eye leveling no of samples =4*/ + if (emif_base == EMIF1_BASE) + writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES, + (*ctrl)->control_emif1_sdram_config_ext); + else if (emif_base == EMIF2_BASE) + writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES, + (*ctrl)->control_emif2_sdram_config_ext); +} + +void init_omap_revision(void) +{ + /* + * For some of the ES2/ES1 boards ID_CODE is not reliable: + * Also, ES1 and ES2 have different ARM revisions + * So use ARM revision for identification + */ + unsigned int rev = cortex_rev(); + + switch (readl(CONTROL_ID_CODE)) { + case OMAP5430_CONTROL_ID_CODE_ES1_0: + *omap_si_rev = OMAP5430_ES1_0; + if (rev == MIDR_CORTEX_A15_R2P2) + *omap_si_rev = OMAP5430_ES2_0; + break; + case OMAP5432_CONTROL_ID_CODE_ES1_0: + *omap_si_rev = OMAP5432_ES1_0; + if (rev == MIDR_CORTEX_A15_R2P2) + *omap_si_rev = OMAP5432_ES2_0; + break; + case OMAP5430_CONTROL_ID_CODE_ES2_0: + *omap_si_rev = OMAP5430_ES2_0; + break; + case OMAP5432_CONTROL_ID_CODE_ES2_0: + *omap_si_rev = OMAP5432_ES2_0; + break; + case DRA752_CONTROL_ID_CODE_ES1_0: + *omap_si_rev = DRA752_ES1_0; + break; + default: + *omap_si_rev = OMAP5430_SILICON_ID_INVALID; + } +} + +void reset_cpu(ulong ignored) +{ + u32 omap_rev = omap_revision(); + + /* + * WARM reset is not functional in case of OMAP5430 ES1.0 soc. + * So use cold reset in case instead. + */ + if (omap_rev == OMAP5430_ES1_0) + writel(PRM_RSTCTRL_RESET << 0x1, (*prcm)->prm_rstctrl); + else + writel(PRM_RSTCTRL_RESET, (*prcm)->prm_rstctrl); +} + +u32 warm_reset(void) +{ + return readl((*prcm)->prm_rstst) & PRM_RSTST_WARM_RESET_MASK; +} + +void setup_warmreset_time(void) +{ + u32 rst_time, rst_val; + +#ifndef CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC + rst_time = CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC; +#else + rst_time = CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC; +#endif + rst_time = usec_to_32k(rst_time) << RSTTIME1_SHIFT; + + if (rst_time > RSTTIME1_MASK) + rst_time = RSTTIME1_MASK; + + rst_val = readl((*prcm)->prm_rsttime) & ~RSTTIME1_MASK; + rst_val |= rst_time; + writel(rst_val, (*prcm)->prm_rsttime); +} diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c new file mode 100644 index 0000000..e839ff5 --- /dev/null +++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c @@ -0,0 +1,980 @@ +/* + * + * HW regs data for OMAP5 Soc + * + * (C) Copyright 2013 + * Texas Instruments, <www.ti.com> + * + * Sricharan R <r.sricharan@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/omap_common.h> + +struct prcm_regs const omap5_es1_prcm = { + /* cm1.ckgen */ + .cm_clksel_core = 0x4a004100, + .cm_clksel_abe = 0x4a004108, + .cm_dll_ctrl = 0x4a004110, + .cm_clkmode_dpll_core = 0x4a004120, + .cm_idlest_dpll_core = 0x4a004124, + .cm_autoidle_dpll_core = 0x4a004128, + .cm_clksel_dpll_core = 0x4a00412c, + .cm_div_m2_dpll_core = 0x4a004130, + .cm_div_m3_dpll_core = 0x4a004134, + .cm_div_h11_dpll_core = 0x4a004138, + .cm_div_h12_dpll_core = 0x4a00413c, + .cm_div_h13_dpll_core = 0x4a004140, + .cm_div_h14_dpll_core = 0x4a004144, + .cm_ssc_deltamstep_dpll_core = 0x4a004148, + .cm_ssc_modfreqdiv_dpll_core = 0x4a00414c, + .cm_emu_override_dpll_core = 0x4a004150, + .cm_div_h22_dpllcore = 0x4a004154, + .cm_div_h23_dpll_core = 0x4a004158, + .cm_clkmode_dpll_mpu = 0x4a004160, + .cm_idlest_dpll_mpu = 0x4a004164, + .cm_autoidle_dpll_mpu = 0x4a004168, + .cm_clksel_dpll_mpu = 0x4a00416c, + .cm_div_m2_dpll_mpu = 0x4a004170, + .cm_ssc_deltamstep_dpll_mpu = 0x4a004188, + .cm_ssc_modfreqdiv_dpll_mpu = 0x4a00418c, + .cm_bypclk_dpll_mpu = 0x4a00419c, + .cm_clkmode_dpll_iva = 0x4a0041a0, + .cm_idlest_dpll_iva = 0x4a0041a4, + .cm_autoidle_dpll_iva = 0x4a0041a8, + .cm_clksel_dpll_iva = 0x4a0041ac, + .cm_div_h11_dpll_iva = 0x4a0041b8, + .cm_div_h12_dpll_iva = 0x4a0041bc, + .cm_ssc_deltamstep_dpll_iva = 0x4a0041c8, + .cm_ssc_modfreqdiv_dpll_iva = 0x4a0041cc, + .cm_bypclk_dpll_iva = 0x4a0041dc, + .cm_clkmode_dpll_abe = 0x4a0041e0, + .cm_idlest_dpll_abe = 0x4a0041e4, + .cm_autoidle_dpll_abe = 0x4a0041e8, + .cm_clksel_dpll_abe = 0x4a0041ec, + .cm_div_m2_dpll_abe = 0x4a0041f0, + .cm_div_m3_dpll_abe = 0x4a0041f4, + .cm_ssc_deltamstep_dpll_abe = 0x4a004208, + .cm_ssc_modfreqdiv_dpll_abe = 0x4a00420c, + .cm_clkmode_dpll_ddrphy = 0x4a004220, + .cm_idlest_dpll_ddrphy = 0x4a004224, + .cm_autoidle_dpll_ddrphy = 0x4a004228, + .cm_clksel_dpll_ddrphy = 0x4a00422c, + .cm_div_m2_dpll_ddrphy = 0x4a004230, + .cm_div_h11_dpll_ddrphy = 0x4a004238, + .cm_div_h12_dpll_ddrphy = 0x4a00423c, + .cm_div_h13_dpll_ddrphy = 0x4a004240, + .cm_ssc_deltamstep_dpll_ddrphy = 0x4a004248, + .cm_shadow_freq_config1 = 0x4a004260, + .cm_mpu_mpu_clkctrl = 0x4a004320, + + /* cm1.dsp */ + .cm_dsp_clkstctrl = 0x4a004400, + .cm_dsp_dsp_clkctrl = 0x4a004420, + + /* cm1.abe */ + .cm1_abe_clkstctrl = 0x4a004500, + .cm1_abe_l4abe_clkctrl = 0x4a004520, + .cm1_abe_aess_clkctrl = 0x4a004528, + .cm1_abe_pdm_clkctrl = 0x4a004530, + .cm1_abe_dmic_clkctrl = 0x4a004538, + .cm1_abe_mcasp_clkctrl = 0x4a004540, + .cm1_abe_mcbsp1_clkctrl = 0x4a004548, + .cm1_abe_mcbsp2_clkctrl = 0x4a004550, + .cm1_abe_mcbsp3_clkctrl = 0x4a004558, + .cm1_abe_slimbus_clkctrl = 0x4a004560, + .cm1_abe_timer5_clkctrl = 0x4a004568, + .cm1_abe_timer6_clkctrl = 0x4a004570, + .cm1_abe_timer7_clkctrl = 0x4a004578, + .cm1_abe_timer8_clkctrl = 0x4a004580, + .cm1_abe_wdt3_clkctrl = 0x4a004588, + + /* cm2.ckgen */ + .cm_clksel_mpu_m3_iss_root = 0x4a008100, + .cm_clksel_usb_60mhz = 0x4a008104, + .cm_scale_fclk = 0x4a008108, + .cm_core_dvfs_perf1 = 0x4a008110, + .cm_core_dvfs_perf2 = 0x4a008114, + .cm_core_dvfs_perf3 = 0x4a008118, + .cm_core_dvfs_perf4 = 0x4a00811c, + .cm_core_dvfs_current = 0x4a008124, + .cm_iva_dvfs_perf_tesla = 0x4a008128, + .cm_iva_dvfs_perf_ivahd = 0x4a00812c, + .cm_iva_dvfs_perf_abe = 0x4a008130, + .cm_iva_dvfs_current = 0x4a008138, + .cm_clkmode_dpll_per = 0x4a008140, + .cm_idlest_dpll_per = 0x4a008144, + .cm_autoidle_dpll_per = 0x4a008148, + .cm_clksel_dpll_per = 0x4a00814c, + .cm_div_m2_dpll_per = 0x4a008150, + .cm_div_m3_dpll_per = 0x4a008154, + .cm_div_h11_dpll_per = 0x4a008158, + .cm_div_h12_dpll_per = 0x4a00815c, + .cm_div_h14_dpll_per = 0x4a008164, + .cm_ssc_deltamstep_dpll_per = 0x4a008168, + .cm_ssc_modfreqdiv_dpll_per = 0x4a00816c, + .cm_emu_override_dpll_per = 0x4a008170, + .cm_clkmode_dpll_usb = 0x4a008180, + .cm_idlest_dpll_usb = 0x4a008184, + .cm_autoidle_dpll_usb = 0x4a008188, + .cm_clksel_dpll_usb = 0x4a00818c, + .cm_div_m2_dpll_usb = 0x4a008190, + .cm_ssc_deltamstep_dpll_usb = 0x4a0081a8, + .cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac, + .cm_clkdcoldo_dpll_usb = 0x4a0081b4, + .cm_clkmode_dpll_unipro = 0x4a0081c0, + .cm_idlest_dpll_unipro = 0x4a0081c4, + .cm_autoidle_dpll_unipro = 0x4a0081c8, + .cm_clksel_dpll_unipro = 0x4a0081cc, + .cm_div_m2_dpll_unipro = 0x4a0081d0, + .cm_ssc_deltamstep_dpll_unipro = 0x4a0081e8, + .cm_ssc_modfreqdiv_dpll_unipro = 0x4a0081ec, + + /* cm2.core */ + .cm_coreaon_bandgap_clkctrl = 0x4a008648, + .cm_coreaon_io_srcomp_clkctrl = 0x4a008650, + .cm_l3_1_clkstctrl = 0x4a008700, + .cm_l3_1_dynamicdep = 0x4a008708, + .cm_l3_1_l3_1_clkctrl = 0x4a008720, + .cm_l3_2_clkstctrl = 0x4a008800, + .cm_l3_2_dynamicdep = 0x4a008808, + .cm_l3_2_l3_2_clkctrl = 0x4a008820, + .cm_l3_gpmc_clkctrl = 0x4a008828, + .cm_l3_2_ocmc_ram_clkctrl = 0x4a008830, + .cm_mpu_m3_clkstctrl = 0x4a008900, + .cm_mpu_m3_staticdep = 0x4a008904, + .cm_mpu_m3_dynamicdep = 0x4a008908, + .cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920, + .cm_sdma_clkstctrl = 0x4a008a00, + .cm_sdma_staticdep = 0x4a008a04, + .cm_sdma_dynamicdep = 0x4a008a08, + .cm_sdma_sdma_clkctrl = 0x4a008a20, + .cm_memif_clkstctrl = 0x4a008b00, + .cm_memif_dmm_clkctrl = 0x4a008b20, + .cm_memif_emif_fw_clkctrl = 0x4a008b28, + .cm_memif_emif_1_clkctrl = 0x4a008b30, + .cm_memif_emif_2_clkctrl = 0x4a008b38, + .cm_memif_dll_clkctrl = 0x4a008b40, + .cm_memif_emif_h1_clkctrl = 0x4a008b50, + .cm_memif_emif_h2_clkctrl = 0x4a008b58, + .cm_memif_dll_h_clkctrl = 0x4a008b60, + .cm_c2c_clkstctrl = 0x4a008c00, + .cm_c2c_staticdep = 0x4a008c04, + .cm_c2c_dynamicdep = 0x4a008c08, + .cm_c2c_sad2d_clkctrl = 0x4a008c20, + .cm_c2c_modem_icr_clkctrl = 0x4a008c28, + .cm_c2c_sad2d_fw_clkctrl = 0x4a008c30, + .cm_l4cfg_clkstctrl = 0x4a008d00, + .cm_l4cfg_dynamicdep = 0x4a008d08, + .cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20, + .cm_l4cfg_hw_sem_clkctrl = 0x4a008d28, + .cm_l4cfg_mailbox_clkctrl = 0x4a008d30, + .cm_l4cfg_sar_rom_clkctrl = 0x4a008d38, + .cm_l3instr_clkstctrl = 0x4a008e00, + .cm_l3instr_l3_3_clkctrl = 0x4a008e20, + .cm_l3instr_l3_instr_clkctrl = 0x4a008e28, + .cm_l3instr_intrconn_wp1_clkctrl = 0x4a008e40, + + /* cm2.ivahd */ + .cm_ivahd_clkstctrl = 0x4a008f00, + .cm_ivahd_ivahd_clkctrl = 0x4a008f20, + .cm_ivahd_sl2_clkctrl = 0x4a008f28, + + /* cm2.cam */ + .cm_cam_clkstctrl = 0x4a009000, + .cm_cam_iss_clkctrl = 0x4a009020, + .cm_cam_fdif_clkctrl = 0x4a009028, + + /* cm2.dss */ + .cm_dss_clkstctrl = 0x4a009100, + .cm_dss_dss_clkctrl = 0x4a009120, + + /* cm2.sgx */ + .cm_sgx_clkstctrl = 0x4a009200, + .cm_sgx_sgx_clkctrl = 0x4a009220, + + /* cm2.l3init */ + .cm_l3init_clkstctrl = 0x4a009300, + .cm_l3init_hsmmc1_clkctrl = 0x4a009328, + .cm_l3init_hsmmc2_clkctrl = 0x4a009330, + .cm_l3init_hsi_clkctrl = 0x4a009338, + .cm_l3init_hsusbhost_clkctrl = 0x4a009358, + .cm_l3init_hsusbotg_clkctrl = 0x4a009360, + .cm_l3init_hsusbtll_clkctrl = 0x4a009368, + .cm_l3init_p1500_clkctrl = 0x4a009378, + .cm_l3init_fsusb_clkctrl = 0x4a0093d0, + .cm_l3init_ocp2scp1_clkctrl = 0x4a0093e0, + + /* cm2.l4per */ + .cm_l4per_clkstctrl = 0x4a009400, + .cm_l4per_dynamicdep = 0x4a009408, + .cm_l4per_adc_clkctrl = 0x4a009420, + .cm_l4per_gptimer10_clkctrl = 0x4a009428, + .cm_l4per_gptimer11_clkctrl = 0x4a009430, + .cm_l4per_gptimer2_clkctrl = 0x4a009438, + .cm_l4per_gptimer3_clkctrl = 0x4a009440, + .cm_l4per_gptimer4_clkctrl = 0x4a009448, + .cm_l4per_gptimer9_clkctrl = 0x4a009450, + .cm_l4per_elm_clkctrl = 0x4a009458, + .cm_l4per_gpio2_clkctrl = 0x4a009460, + .cm_l4per_gpio3_clkctrl = 0x4a009468, + .cm_l4per_gpio4_clkctrl = 0x4a009470, + .cm_l4per_gpio5_clkctrl = 0x4a009478, + .cm_l4per_gpio6_clkctrl = 0x4a009480, + .cm_l4per_hdq1w_clkctrl = 0x4a009488, + .cm_l4per_hecc1_clkctrl = 0x4a009490, + .cm_l4per_hecc2_clkctrl = 0x4a009498, + .cm_l4per_i2c1_clkctrl = 0x4a0094a0, + .cm_l4per_i2c2_clkctrl = 0x4a0094a8, + .cm_l4per_i2c3_clkctrl = 0x4a0094b0, + .cm_l4per_i2c4_clkctrl = 0x4a0094b8, + .cm_l4per_l4per_clkctrl = 0x4a0094c0, + .cm_l4per_mcasp2_clkctrl = 0x4a0094d0, + .cm_l4per_mcasp3_clkctrl = 0x4a0094d8, + .cm_l4per_mgate_clkctrl = 0x4a0094e8, + .cm_l4per_mcspi1_clkctrl = 0x4a0094f0, + .cm_l4per_mcspi2_clkctrl = 0x4a0094f8, + .cm_l4per_mcspi3_clkctrl = 0x4a009500, + .cm_l4per_mcspi4_clkctrl = 0x4a009508, + .cm_l4per_gpio7_clkctrl = 0x4a009510, + .cm_l4per_gpio8_clkctrl = 0x4a009518, + .cm_l4per_mmcsd3_clkctrl = 0x4a009520, + .cm_l4per_mmcsd4_clkctrl = 0x4a009528, + .cm_l4per_msprohg_clkctrl = 0x4a009530, + .cm_l4per_slimbus2_clkctrl = 0x4a009538, + .cm_l4per_uart1_clkctrl = 0x4a009540, + .cm_l4per_uart2_clkctrl = 0x4a009548, + .cm_l4per_uart3_clkctrl = 0x4a009550, + .cm_l4per_uart4_clkctrl = 0x4a009558, + .cm_l4per_mmcsd5_clkctrl = 0x4a009560, + .cm_l4per_i2c5_clkctrl = 0x4a009568, + .cm_l4per_uart5_clkctrl = 0x4a009570, + .cm_l4per_uart6_clkctrl = 0x4a009578, + .cm_l4sec_clkstctrl = 0x4a009580, + .cm_l4sec_staticdep = 0x4a009584, + .cm_l4sec_dynamicdep = 0x4a009588, + .cm_l4sec_aes1_clkctrl = 0x4a0095a0, + .cm_l4sec_aes2_clkctrl = 0x4a0095a8, + .cm_l4sec_des3des_clkctrl = 0x4a0095b0, + .cm_l4sec_pkaeip29_clkctrl = 0x4a0095b8, + .cm_l4sec_rng_clkctrl = 0x4a0095c0, + .cm_l4sec_sha2md51_clkctrl = 0x4a0095c8, + .cm_l4sec_cryptodma_clkctrl = 0x4a0095d8, + + /* l4 wkup regs */ + .cm_abe_pll_ref_clksel = 0x4ae0610c, + .cm_sys_clksel = 0x4ae06110, + .cm_wkup_clkstctrl = 0x4ae07800, + .cm_wkup_l4wkup_clkctrl = 0x4ae07820, + .cm_wkup_wdtimer1_clkctrl = 0x4ae07828, + .cm_wkup_wdtimer2_clkctrl = 0x4ae07830, + .cm_wkup_gpio1_clkctrl = 0x4ae07838, + .cm_wkup_gptimer1_clkctrl = 0x4ae07840, + .cm_wkup_gptimer12_clkctrl = 0x4ae07848, + .cm_wkup_synctimer_clkctrl = 0x4ae07850, + .cm_wkup_usim_clkctrl = 0x4ae07858, + .cm_wkup_sarram_clkctrl = 0x4ae07860, + .cm_wkup_keyboard_clkctrl = 0x4ae07878, + .cm_wkup_rtc_clkctrl = 0x4ae07880, + .cm_wkup_bandgap_clkctrl = 0x4ae07888, + .cm_wkupaon_scrm_clkctrl = 0x4ae07890, + .cm_wkupaon_io_srcomp_clkctrl = 0x4ae07898, + .prm_rstctrl = 0x4ae07b00, + .prm_rstst = 0x4ae07b04, + .prm_rsttime = 0x4ae07b08, + .prm_vc_val_bypass = 0x4ae07ba0, + .prm_vc_cfg_i2c_mode = 0x4ae07bb4, + .prm_vc_cfg_i2c_clk = 0x4ae07bb8, + .prm_sldo_core_setup = 0x4ae07bc4, + .prm_sldo_core_ctrl = 0x4ae07bc8, + .prm_sldo_mpu_setup = 0x4ae07bcc, + .prm_sldo_mpu_ctrl = 0x4ae07bd0, + .prm_sldo_mm_setup = 0x4ae07bd4, + .prm_sldo_mm_ctrl = 0x4ae07bd8, + + /* SCRM stuff, used by some boards */ + .scrm_auxclk0 = 0x4ae0a310, + .scrm_auxclk1 = 0x4ae0a314, +}; + +struct omap_sys_ctrl_regs const omap5_ctrl = { + .control_status = 0x4A002134, + .control_std_fuse_opp_vdd_mpu_2 = 0x4A0021B4, + .control_padconf_core_base = 0x4A002800, + .control_paconf_global = 0x4A002DA0, + .control_paconf_mode = 0x4A002DA4, + .control_smart1io_padconf_0 = 0x4A002DA8, + .control_smart1io_padconf_1 = 0x4A002DAC, + .control_smart1io_padconf_2 = 0x4A002DB0, + .control_smart2io_padconf_0 = 0x4A002DB4, + .control_smart2io_padconf_1 = 0x4A002DB8, + .control_smart2io_padconf_2 = 0x4A002DBC, + .control_smart3io_padconf_0 = 0x4A002DC0, + .control_smart3io_padconf_1 = 0x4A002DC4, + .control_pbias = 0x4A002E00, + .control_i2c_0 = 0x4A002E04, + .control_camera_rx = 0x4A002E08, + .control_hdmi_tx_phy = 0x4A002E0C, + .control_uniportm = 0x4A002E10, + .control_dsiphy = 0x4A002E14, + .control_mcbsplp = 0x4A002E18, + .control_usb2phycore = 0x4A002E1C, + .control_hdmi_1 = 0x4A002E20, + .control_hsi = 0x4A002E24, + .control_ddr3ch1_0 = 0x4A002E30, + .control_ddr3ch2_0 = 0x4A002E34, + .control_ddrch1_0 = 0x4A002E38, + .control_ddrch1_1 = 0x4A002E3C, + .control_ddrch2_0 = 0x4A002E40, + .control_ddrch2_1 = 0x4A002E44, + .control_lpddr2ch1_0 = 0x4A002E48, + .control_lpddr2ch1_1 = 0x4A002E4C, + .control_ddrio_0 = 0x4A002E50, + .control_ddrio_1 = 0x4A002E54, + .control_ddrio_2 = 0x4A002E58, + .control_hyst_1 = 0x4A002E5C, + .control_usbb_hsic_control = 0x4A002E60, + .control_c2c = 0x4A002E64, + .control_core_control_spare_rw = 0x4A002E68, + .control_core_control_spare_r = 0x4A002E6C, + .control_core_control_spare_r_c0 = 0x4A002E70, + .control_srcomp_north_side = 0x4A002E74, + .control_srcomp_south_side = 0x4A002E78, + .control_srcomp_east_side = 0x4A002E7C, + .control_srcomp_west_side = 0x4A002E80, + .control_srcomp_code_latch = 0x4A002E84, + .control_port_emif1_sdram_config = 0x4AE0C110, + .control_port_emif1_lpddr2_nvm_config = 0x4AE0C114, + .control_port_emif2_sdram_config = 0x4AE0C118, + .control_emif1_sdram_config_ext = 0x4AE0C144, + .control_emif2_sdram_config_ext = 0x4AE0C148, + .control_wkup_ldovbb_mpu_voltage_ctrl = 0x4AE0C318, + .control_padconf_wkup_base = 0x4AE0C800, + .control_smart1nopmio_padconf_0 = 0x4AE0CDA0, + .control_smart1nopmio_padconf_1 = 0x4AE0CDA4, + .control_padconf_mode = 0x4AE0CDA8, + .control_xtal_oscillator = 0x4AE0CDAC, + .control_i2c_2 = 0x4AE0CDB0, + .control_ckobuffer = 0x4AE0CDB4, + .control_wkup_control_spare_rw = 0x4AE0CDB8, + .control_wkup_control_spare_r = 0x4AE0CDBC, + .control_wkup_control_spare_r_c0 = 0x4AE0CDC0, + .control_srcomp_east_side_wkup = 0x4AE0CDC4, + .control_efuse_1 = 0x4AE0CDC8, + .control_efuse_2 = 0x4AE0CDCC, + .control_efuse_3 = 0x4AE0CDD0, + .control_efuse_4 = 0x4AE0CDD4, + .control_efuse_5 = 0x4AE0CDD8, + .control_efuse_6 = 0x4AE0CDDC, + .control_efuse_7 = 0x4AE0CDE0, + .control_efuse_8 = 0x4AE0CDE4, + .control_efuse_9 = 0x4AE0CDE8, + .control_efuse_10 = 0x4AE0CDEC, + .control_efuse_11 = 0x4AE0CDF0, + .control_efuse_12 = 0x4AE0CDF4, + .control_efuse_13 = 0x4AE0CDF8, +}; + +struct omap_sys_ctrl_regs const dra7xx_ctrl = { + .control_status = 0x4A002134, + .control_core_mmr_lock1 = 0x4A002540, + .control_core_mmr_lock2 = 0x4A002544, + .control_core_mmr_lock3 = 0x4A002548, + .control_core_mmr_lock4 = 0x4A00254C, + .control_core_mmr_lock5 = 0x4A002550, + .control_core_control_io1 = 0x4A002554, + .control_core_control_io2 = 0x4A002558, + .control_paconf_global = 0x4A002DA0, + .control_paconf_mode = 0x4A002DA4, + .control_smart1io_padconf_0 = 0x4A002DA8, + .control_smart1io_padconf_1 = 0x4A002DAC, + .control_smart1io_padconf_2 = 0x4A002DB0, + .control_smart2io_padconf_0 = 0x4A002DB4, + .control_smart2io_padconf_1 = 0x4A002DB8, + .control_smart2io_padconf_2 = 0x4A002DBC, + .control_smart3io_padconf_0 = 0x4A002DC0, + .control_smart3io_padconf_1 = 0x4A002DC4, + .control_pbias = 0x4A002E00, + .control_i2c_0 = 0x4A002E04, + .control_camera_rx = 0x4A002E08, + .control_hdmi_tx_phy = 0x4A002E0C, + .control_uniportm = 0x4A002E10, + .control_dsiphy = 0x4A002E14, + .control_mcbsplp = 0x4A002E18, + .control_usb2phycore = 0x4A002E1C, + .control_hdmi_1 = 0x4A002E20, + .control_hsi = 0x4A002E24, + .control_ddr3ch1_0 = 0x4A002E30, + .control_ddr3ch2_0 = 0x4A002E34, + .control_ddrch1_0 = 0x4A002E38, + .control_ddrch1_1 = 0x4A002E3C, + .control_ddrch2_0 = 0x4A002E40, + .control_ddrch2_1 = 0x4A002E44, + .control_lpddr2ch1_0 = 0x4A002E48, + .control_lpddr2ch1_1 = 0x4A002E4C, + .control_ddrio_0 = 0x4A002E50, + .control_ddrio_1 = 0x4A002E54, + .control_ddrio_2 = 0x4A002E58, + .control_hyst_1 = 0x4A002E5C, + .control_usbb_hsic_control = 0x4A002E60, + .control_c2c = 0x4A002E64, + .control_core_control_spare_rw = 0x4A002E68, + .control_core_control_spare_r = 0x4A002E6C, + .control_core_control_spare_r_c0 = 0x4A002E70, + .control_srcomp_north_side = 0x4A002E74, + .control_srcomp_south_side = 0x4A002E78, + .control_srcomp_east_side = 0x4A002E7C, + .control_srcomp_west_side = 0x4A002E80, + .control_srcomp_code_latch = 0x4A002E84, + .control_ddr_control_ext_0 = 0x4A002E88, + .control_padconf_core_base = 0x4A003400, + .control_port_emif1_sdram_config = 0x4AE0C110, + .control_port_emif1_lpddr2_nvm_config = 0x4AE0C114, + .control_port_emif2_sdram_config = 0x4AE0C118, + .control_emif1_sdram_config_ext = 0x4AE0C144, + .control_emif2_sdram_config_ext = 0x4AE0C148, + .control_padconf_mode = 0x4AE0C5A0, + .control_xtal_oscillator = 0x4AE0C5A4, + .control_i2c_2 = 0x4AE0C5A8, + .control_ckobuffer = 0x4AE0C5AC, + .control_wkup_control_spare_rw = 0x4AE0C5B0, + .control_wkup_control_spare_r = 0x4AE0C5B4, + .control_wkup_control_spare_r_c0 = 0x4AE0C5B8, + .control_srcomp_east_side_wkup = 0x4AE0C5BC, + .control_efuse_1 = 0x4AE0C5C0, + .control_efuse_2 = 0x4AE0C5C4, + .control_efuse_3 = 0x4AE0C5C8, + .control_efuse_4 = 0x4AE0C5CC, + .control_efuse_13 = 0x4AE0C5F0, +}; + +struct prcm_regs const omap5_es2_prcm = { + /* cm1.ckgen */ + .cm_clksel_core = 0x4a004100, + .cm_clksel_abe = 0x4a004108, + .cm_dll_ctrl = 0x4a004110, + .cm_clkmode_dpll_core = 0x4a004120, + .cm_idlest_dpll_core = 0x4a004124, + .cm_autoidle_dpll_core = 0x4a004128, + .cm_clksel_dpll_core = 0x4a00412c, + .cm_div_m2_dpll_core = 0x4a004130, + .cm_div_m3_dpll_core = 0x4a004134, + .cm_div_h11_dpll_core = 0x4a004138, + .cm_div_h12_dpll_core = 0x4a00413c, + .cm_div_h13_dpll_core = 0x4a004140, + .cm_div_h14_dpll_core = 0x4a004144, + .cm_ssc_deltamstep_dpll_core = 0x4a004148, + .cm_ssc_modfreqdiv_dpll_core = 0x4a00414c, + .cm_div_h21_dpll_core = 0x4a004150, + .cm_div_h22_dpllcore = 0x4a004154, + .cm_div_h23_dpll_core = 0x4a004158, + .cm_div_h24_dpll_core = 0x4a00415c, + .cm_clkmode_dpll_mpu = 0x4a004160, + .cm_idlest_dpll_mpu = 0x4a004164, + .cm_autoidle_dpll_mpu = 0x4a004168, + .cm_clksel_dpll_mpu = 0x4a00416c, + .cm_div_m2_dpll_mpu = 0x4a004170, + .cm_ssc_deltamstep_dpll_mpu = 0x4a004188, + .cm_ssc_modfreqdiv_dpll_mpu = 0x4a00418c, + .cm_bypclk_dpll_mpu = 0x4a00419c, + .cm_clkmode_dpll_iva = 0x4a0041a0, + .cm_idlest_dpll_iva = 0x4a0041a4, + .cm_autoidle_dpll_iva = 0x4a0041a8, + .cm_clksel_dpll_iva = 0x4a0041ac, + .cm_div_h11_dpll_iva = 0x4a0041b8, + .cm_div_h12_dpll_iva = 0x4a0041bc, + .cm_ssc_deltamstep_dpll_iva = 0x4a0041c8, + .cm_ssc_modfreqdiv_dpll_iva = 0x4a0041cc, + .cm_bypclk_dpll_iva = 0x4a0041dc, + .cm_clkmode_dpll_abe = 0x4a0041e0, + .cm_idlest_dpll_abe = 0x4a0041e4, + .cm_autoidle_dpll_abe = 0x4a0041e8, + .cm_clksel_dpll_abe = 0x4a0041ec, + .cm_div_m2_dpll_abe = 0x4a0041f0, + .cm_div_m3_dpll_abe = 0x4a0041f4, + .cm_ssc_deltamstep_dpll_abe = 0x4a004208, + .cm_ssc_modfreqdiv_dpll_abe = 0x4a00420c, + .cm_clkmode_dpll_ddrphy = 0x4a004220, + .cm_idlest_dpll_ddrphy = 0x4a004224, + .cm_autoidle_dpll_ddrphy = 0x4a004228, + .cm_clksel_dpll_ddrphy = 0x4a00422c, + .cm_div_m2_dpll_ddrphy = 0x4a004230, + .cm_div_h11_dpll_ddrphy = 0x4a004238, + .cm_div_h12_dpll_ddrphy = 0x4a00423c, + .cm_div_h13_dpll_ddrphy = 0x4a004240, + .cm_ssc_deltamstep_dpll_ddrphy = 0x4a004248, + .cm_shadow_freq_config1 = 0x4a004260, + .cm_mpu_mpu_clkctrl = 0x4a004320, + + /* cm1.dsp */ + .cm_dsp_clkstctrl = 0x4a004400, + .cm_dsp_dsp_clkctrl = 0x4a004420, + + /* cm1.abe */ + .cm1_abe_clkstctrl = 0x4a004500, + .cm1_abe_l4abe_clkctrl = 0x4a004520, + .cm1_abe_aess_clkctrl = 0x4a004528, + .cm1_abe_pdm_clkctrl = 0x4a004530, + .cm1_abe_dmic_clkctrl = 0x4a004538, + .cm1_abe_mcasp_clkctrl = 0x4a004540, + .cm1_abe_mcbsp1_clkctrl = 0x4a004548, + .cm1_abe_mcbsp2_clkctrl = 0x4a004550, + .cm1_abe_mcbsp3_clkctrl = 0x4a004558, + .cm1_abe_slimbus_clkctrl = 0x4a004560, + .cm1_abe_timer5_clkctrl = 0x4a004568, + .cm1_abe_timer6_clkctrl = 0x4a004570, + .cm1_abe_timer7_clkctrl = 0x4a004578, + .cm1_abe_timer8_clkctrl = 0x4a004580, + .cm1_abe_wdt3_clkctrl = 0x4a004588, + + + + /* cm2.ckgen */ + .cm_clksel_mpu_m3_iss_root = 0x4a008100, + .cm_clksel_usb_60mhz = 0x4a008104, + .cm_scale_fclk = 0x4a008108, + .cm_core_dvfs_perf1 = 0x4a008110, + .cm_core_dvfs_perf2 = 0x4a008114, + .cm_core_dvfs_perf3 = 0x4a008118, + .cm_core_dvfs_perf4 = 0x4a00811c, + .cm_core_dvfs_current = 0x4a008124, + .cm_iva_dvfs_perf_tesla = 0x4a008128, + .cm_iva_dvfs_perf_ivahd = 0x4a00812c, + .cm_iva_dvfs_perf_abe = 0x4a008130, + .cm_iva_dvfs_current = 0x4a008138, + .cm_clkmode_dpll_per = 0x4a008140, + .cm_idlest_dpll_per = 0x4a008144, + .cm_autoidle_dpll_per = 0x4a008148, + .cm_clksel_dpll_per = 0x4a00814c, + .cm_div_m2_dpll_per = 0x4a008150, + .cm_div_m3_dpll_per = 0x4a008154, + .cm_div_h11_dpll_per = 0x4a008158, + .cm_div_h12_dpll_per = 0x4a00815c, + .cm_div_h13_dpll_per = 0x4a008160, + .cm_div_h14_dpll_per = 0x4a008164, + .cm_ssc_deltamstep_dpll_per = 0x4a008168, + .cm_ssc_modfreqdiv_dpll_per = 0x4a00816c, + .cm_emu_override_dpll_per = 0x4a008170, + .cm_clkmode_dpll_usb = 0x4a008180, + .cm_idlest_dpll_usb = 0x4a008184, + .cm_autoidle_dpll_usb = 0x4a008188, + .cm_clksel_dpll_usb = 0x4a00818c, + .cm_div_m2_dpll_usb = 0x4a008190, + .cm_ssc_deltamstep_dpll_usb = 0x4a0081a8, + .cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac, + .cm_clkdcoldo_dpll_usb = 0x4a0081b4, + .cm_clkmode_dpll_unipro = 0x4a0081c0, + .cm_idlest_dpll_unipro = 0x4a0081c4, + .cm_autoidle_dpll_unipro = 0x4a0081c8, + .cm_clksel_dpll_unipro = 0x4a0081cc, + .cm_div_m2_dpll_unipro = 0x4a0081d0, + .cm_ssc_deltamstep_dpll_unipro = 0x4a0081e8, + .cm_ssc_modfreqdiv_dpll_unipro = 0x4a0081ec, + .cm_coreaon_bandgap_clkctrl = 0x4a008648, + .cm_coreaon_io_srcomp_clkctrl = 0x4a008650, + + /* cm2.core */ + .cm_l3_1_clkstctrl = 0x4a008700, + .cm_l3_1_dynamicdep = 0x4a008708, + .cm_l3_1_l3_1_clkctrl = 0x4a008720, + .cm_l3_2_clkstctrl = 0x4a008800, + .cm_l3_2_dynamicdep = 0x4a008808, + .cm_l3_2_l3_2_clkctrl = 0x4a008820, + .cm_l3_gpmc_clkctrl = 0x4a008828, + .cm_l3_2_ocmc_ram_clkctrl = 0x4a008830, + .cm_mpu_m3_clkstctrl = 0x4a008900, + .cm_mpu_m3_staticdep = 0x4a008904, + .cm_mpu_m3_dynamicdep = 0x4a008908, + .cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920, + .cm_sdma_clkstctrl = 0x4a008a00, + .cm_sdma_staticdep = 0x4a008a04, + .cm_sdma_dynamicdep = 0x4a008a08, + .cm_sdma_sdma_clkctrl = 0x4a008a20, + .cm_memif_clkstctrl = 0x4a008b00, + .cm_memif_dmm_clkctrl = 0x4a008b20, + .cm_memif_emif_fw_clkctrl = 0x4a008b28, + .cm_memif_emif_1_clkctrl = 0x4a008b30, + .cm_memif_emif_2_clkctrl = 0x4a008b38, + .cm_memif_dll_clkctrl = 0x4a008b40, + .cm_memif_emif_h1_clkctrl = 0x4a008b50, + .cm_memif_emif_h2_clkctrl = 0x4a008b58, + .cm_memif_dll_h_clkctrl = 0x4a008b60, + .cm_c2c_clkstctrl = 0x4a008c00, + .cm_c2c_staticdep = 0x4a008c04, + .cm_c2c_dynamicdep = 0x4a008c08, + .cm_c2c_sad2d_clkctrl = 0x4a008c20, + .cm_c2c_modem_icr_clkctrl = 0x4a008c28, + .cm_c2c_sad2d_fw_clkctrl = 0x4a008c30, + .cm_l4cfg_clkstctrl = 0x4a008d00, + .cm_l4cfg_dynamicdep = 0x4a008d08, + .cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20, + .cm_l4cfg_hw_sem_clkctrl = 0x4a008d28, + .cm_l4cfg_mailbox_clkctrl = 0x4a008d30, + .cm_l4cfg_sar_rom_clkctrl = 0x4a008d38, + .cm_l3instr_clkstctrl = 0x4a008e00, + .cm_l3instr_l3_3_clkctrl = 0x4a008e20, + .cm_l3instr_l3_instr_clkctrl = 0x4a008e28, + .cm_l3instr_intrconn_wp1_clkctrl = 0x4a008e40, + .cm_l4per_clkstctrl = 0x4a009000, + .cm_l4per_dynamicdep = 0x4a009008, + .cm_l4per_adc_clkctrl = 0x4a009020, + .cm_l4per_gptimer10_clkctrl = 0x4a009028, + .cm_l4per_gptimer11_clkctrl = 0x4a009030, + .cm_l4per_gptimer2_clkctrl = 0x4a009038, + .cm_l4per_gptimer3_clkctrl = 0x4a009040, + .cm_l4per_gptimer4_clkctrl = 0x4a009048, + .cm_l4per_gptimer9_clkctrl = 0x4a009050, + .cm_l4per_elm_clkctrl = 0x4a009058, + .cm_l4per_gpio2_clkctrl = 0x4a009060, + .cm_l4per_gpio3_clkctrl = 0x4a009068, + .cm_l4per_gpio4_clkctrl = 0x4a009070, + .cm_l4per_gpio5_clkctrl = 0x4a009078, + .cm_l4per_gpio6_clkctrl = 0x4a009080, + .cm_l4per_hdq1w_clkctrl = 0x4a009088, + .cm_l4per_hecc1_clkctrl = 0x4a009090, + .cm_l4per_hecc2_clkctrl = 0x4a009098, + .cm_l4per_i2c1_clkctrl = 0x4a0090a0, + .cm_l4per_i2c2_clkctrl = 0x4a0090a8, + .cm_l4per_i2c3_clkctrl = 0x4a0090b0, + .cm_l4per_i2c4_clkctrl = 0x4a0090b8, + .cm_l4per_l4per_clkctrl = 0x4a0090c0, + .cm_l4per_mcasp2_clkctrl = 0x4a0090d0, + .cm_l4per_mcasp3_clkctrl = 0x4a0090d8, + .cm_l4per_mgate_clkctrl = 0x4a0090e8, + .cm_l4per_mcspi1_clkctrl = 0x4a0090f0, + .cm_l4per_mcspi2_clkctrl = 0x4a0090f8, + .cm_l4per_mcspi3_clkctrl = 0x4a009100, + .cm_l4per_mcspi4_clkctrl = 0x4a009108, + .cm_l4per_gpio7_clkctrl = 0x4a009110, + .cm_l4per_gpio8_clkctrl = 0x4a009118, + .cm_l4per_mmcsd3_clkctrl = 0x4a009120, + .cm_l4per_mmcsd4_clkctrl = 0x4a009128, + .cm_l4per_msprohg_clkctrl = 0x4a009130, + .cm_l4per_slimbus2_clkctrl = 0x4a009138, + .cm_l4per_uart1_clkctrl = 0x4a009140, + .cm_l4per_uart2_clkctrl = 0x4a009148, + .cm_l4per_uart3_clkctrl = 0x4a009150, + .cm_l4per_uart4_clkctrl = 0x4a009158, + .cm_l4per_mmcsd5_clkctrl = 0x4a009160, + .cm_l4per_i2c5_clkctrl = 0x4a009168, + .cm_l4per_uart5_clkctrl = 0x4a009170, + .cm_l4per_uart6_clkctrl = 0x4a009178, + .cm_l4sec_clkstctrl = 0x4a009180, + .cm_l4sec_staticdep = 0x4a009184, + .cm_l4sec_dynamicdep = 0x4a009188, + .cm_l4sec_aes1_clkctrl = 0x4a0091a0, + .cm_l4sec_aes2_clkctrl = 0x4a0091a8, + .cm_l4sec_des3des_clkctrl = 0x4a0091b0, + .cm_l4sec_pkaeip29_clkctrl = 0x4a0091b8, + .cm_l4sec_rng_clkctrl = 0x4a0091c0, + .cm_l4sec_sha2md51_clkctrl = 0x4a0091c8, + .cm_l4sec_cryptodma_clkctrl = 0x4a0091d8, + + /* cm2.ivahd */ + .cm_ivahd_clkstctrl = 0x4a009200, + .cm_ivahd_ivahd_clkctrl = 0x4a009220, + .cm_ivahd_sl2_clkctrl = 0x4a009228, + + /* cm2.cam */ + .cm_cam_clkstctrl = 0x4a009300, + .cm_cam_iss_clkctrl = 0x4a009320, + .cm_cam_fdif_clkctrl = 0x4a009328, + + /* cm2.dss */ + .cm_dss_clkstctrl = 0x4a009400, + .cm_dss_dss_clkctrl = 0x4a009420, + + /* cm2.sgx */ + .cm_sgx_clkstctrl = 0x4a009500, + .cm_sgx_sgx_clkctrl = 0x4a009520, + + /* cm2.l3init */ + .cm_l3init_clkstctrl = 0x4a009600, + + /* cm2.l3init */ + .cm_l3init_hsmmc1_clkctrl = 0x4a009628, + .cm_l3init_hsmmc2_clkctrl = 0x4a009630, + .cm_l3init_hsi_clkctrl = 0x4a009638, + .cm_l3init_hsusbhost_clkctrl = 0x4a009658, + .cm_l3init_hsusbotg_clkctrl = 0x4a009660, + .cm_l3init_hsusbtll_clkctrl = 0x4a009668, + .cm_l3init_p1500_clkctrl = 0x4a009678, + .cm_l3init_fsusb_clkctrl = 0x4a0096d0, + .cm_l3init_ocp2scp1_clkctrl = 0x4a0096e0, + + /* prm irqstatus regs */ + .prm_irqstatus_mpu_2 = 0x4ae06014, + + /* l4 wkup regs */ + .cm_abe_pll_ref_clksel = 0x4ae0610c, + .cm_sys_clksel = 0x4ae06110, + .cm_wkup_clkstctrl = 0x4ae07900, + .cm_wkup_l4wkup_clkctrl = 0x4ae07920, + .cm_wkup_wdtimer1_clkctrl = 0x4ae07928, + .cm_wkup_wdtimer2_clkctrl = 0x4ae07930, + .cm_wkup_gpio1_clkctrl = 0x4ae07938, + .cm_wkup_gptimer1_clkctrl = 0x4ae07940, + .cm_wkup_gptimer12_clkctrl = 0x4ae07948, + .cm_wkup_synctimer_clkctrl = 0x4ae07950, + .cm_wkup_usim_clkctrl = 0x4ae07958, + .cm_wkup_sarram_clkctrl = 0x4ae07960, + .cm_wkup_keyboard_clkctrl = 0x4ae07978, + .cm_wkup_rtc_clkctrl = 0x4ae07980, + .cm_wkup_bandgap_clkctrl = 0x4ae07988, + .cm_wkupaon_scrm_clkctrl = 0x4ae07990, + .cm_wkupaon_io_srcomp_clkctrl = 0x4ae07998, + .prm_rstctrl = 0x4ae07c00, + .prm_rstst = 0x4ae07c04, + .prm_rsttime = 0x4ae07c08, + .prm_vc_val_bypass = 0x4ae07ca0, + .prm_vc_cfg_i2c_mode = 0x4ae07cb4, + .prm_vc_cfg_i2c_clk = 0x4ae07cb8, + + .prm_sldo_core_setup = 0x4ae07cc4, + .prm_sldo_core_ctrl = 0x4ae07cc8, + .prm_sldo_mpu_setup = 0x4ae07ccc, + .prm_sldo_mpu_ctrl = 0x4ae07cd0, + .prm_sldo_mm_setup = 0x4ae07cd4, + .prm_sldo_mm_ctrl = 0x4ae07cd8, + .prm_abbldo_mpu_setup = 0x4ae07cdc, + .prm_abbldo_mpu_ctrl = 0x4ae07ce0, + + /* SCRM stuff, used by some boards */ + .scrm_auxclk0 = 0x4ae0a310, + .scrm_auxclk1 = 0x4ae0a314, +}; + +struct prcm_regs const dra7xx_prcm = { + /* cm1.ckgen */ + .cm_clksel_core = 0x4a005100, + .cm_clksel_abe = 0x4a005108, + .cm_dll_ctrl = 0x4a005110, + .cm_clkmode_dpll_core = 0x4a005120, + .cm_idlest_dpll_core = 0x4a005124, + .cm_autoidle_dpll_core = 0x4a005128, + .cm_clksel_dpll_core = 0x4a00512c, + .cm_div_m2_dpll_core = 0x4a005130, + .cm_div_m3_dpll_core = 0x4a005134, + .cm_div_h11_dpll_core = 0x4a005138, + .cm_div_h12_dpll_core = 0x4a00513c, + .cm_div_h13_dpll_core = 0x4a005140, + .cm_div_h14_dpll_core = 0x4a005144, + .cm_ssc_deltamstep_dpll_core = 0x4a005148, + .cm_ssc_modfreqdiv_dpll_core = 0x4a00514c, + .cm_div_h21_dpll_core = 0x4a005150, + .cm_div_h22_dpllcore = 0x4a005154, + .cm_div_h23_dpll_core = 0x4a005158, + .cm_div_h24_dpll_core = 0x4a00515c, + .cm_clkmode_dpll_mpu = 0x4a005160, + .cm_idlest_dpll_mpu = 0x4a005164, + .cm_autoidle_dpll_mpu = 0x4a005168, + .cm_clksel_dpll_mpu = 0x4a00516c, + .cm_div_m2_dpll_mpu = 0x4a005170, + .cm_ssc_deltamstep_dpll_mpu = 0x4a005188, + .cm_ssc_modfreqdiv_dpll_mpu = 0x4a00518c, + .cm_bypclk_dpll_mpu = 0x4a00519c, + .cm_clkmode_dpll_iva = 0x4a0051a0, + .cm_idlest_dpll_iva = 0x4a0051a4, + .cm_autoidle_dpll_iva = 0x4a0051a8, + .cm_clksel_dpll_iva = 0x4a0051ac, + .cm_ssc_deltamstep_dpll_iva = 0x4a0051c8, + .cm_ssc_modfreqdiv_dpll_iva = 0x4a0051cc, + .cm_bypclk_dpll_iva = 0x4a0051dc, + .cm_clkmode_dpll_abe = 0x4a0051e0, + .cm_idlest_dpll_abe = 0x4a0051e4, + .cm_autoidle_dpll_abe = 0x4a0051e8, + .cm_clksel_dpll_abe = 0x4a0051ec, + .cm_div_m2_dpll_abe = 0x4a0051f0, + .cm_div_m3_dpll_abe = 0x4a0051f4, + .cm_ssc_deltamstep_dpll_abe = 0x4a005208, + .cm_ssc_modfreqdiv_dpll_abe = 0x4a00520c, + .cm_clkmode_dpll_ddrphy = 0x4a005210, + .cm_idlest_dpll_ddrphy = 0x4a005214, + .cm_autoidle_dpll_ddrphy = 0x4a005218, + .cm_clksel_dpll_ddrphy = 0x4a00521c, + .cm_div_m2_dpll_ddrphy = 0x4a005220, + .cm_div_h11_dpll_ddrphy = 0x4a005228, + .cm_ssc_deltamstep_dpll_ddrphy = 0x4a00522c, + .cm_clkmode_dpll_dsp = 0x4a005234, + .cm_shadow_freq_config1 = 0x4a005260, + + /* cm1.mpu */ + .cm_mpu_mpu_clkctrl = 0x4a005320, + + /* cm1.dsp */ + .cm_dsp_clkstctrl = 0x4a005400, + .cm_dsp_dsp_clkctrl = 0x4a005420, + + /* cm2.ckgen */ + .cm_clksel_usb_60mhz = 0x4a008104, + .cm_clkmode_dpll_per = 0x4a008140, + .cm_idlest_dpll_per = 0x4a008144, + .cm_autoidle_dpll_per = 0x4a008148, + .cm_clksel_dpll_per = 0x4a00814c, + .cm_div_m2_dpll_per = 0x4a008150, + .cm_div_m3_dpll_per = 0x4a008154, + .cm_div_h11_dpll_per = 0x4a008158, + .cm_div_h12_dpll_per = 0x4a00815c, + .cm_div_h13_dpll_per = 0x4a008160, + .cm_div_h14_dpll_per = 0x4a008164, + .cm_ssc_deltamstep_dpll_per = 0x4a008168, + .cm_ssc_modfreqdiv_dpll_per = 0x4a00816c, + .cm_clkmode_dpll_usb = 0x4a008180, + .cm_idlest_dpll_usb = 0x4a008184, + .cm_autoidle_dpll_usb = 0x4a008188, + .cm_clksel_dpll_usb = 0x4a00818c, + .cm_div_m2_dpll_usb = 0x4a008190, + .cm_ssc_deltamstep_dpll_usb = 0x4a0081a8, + .cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac, + .cm_clkdcoldo_dpll_usb = 0x4a0081b4, + .cm_clkmode_dpll_pcie_ref = 0x4a008200, + .cm_clkmode_apll_pcie = 0x4a00821c, + .cm_idlest_apll_pcie = 0x4a008220, + .cm_div_m2_apll_pcie = 0x4a008224, + .cm_clkvcoldo_apll_pcie = 0x4a008228, + + /* cm2.core */ + .cm_l3_1_clkstctrl = 0x4a008700, + .cm_l3_1_dynamicdep = 0x4a008708, + .cm_l3_1_l3_1_clkctrl = 0x4a008720, + .cm_l3_gpmc_clkctrl = 0x4a008728, + .cm_mpu_m3_clkstctrl = 0x4a008900, + .cm_mpu_m3_staticdep = 0x4a008904, + .cm_mpu_m3_dynamicdep = 0x4a008908, + .cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920, + .cm_sdma_clkstctrl = 0x4a008a00, + .cm_sdma_staticdep = 0x4a008a04, + .cm_sdma_dynamicdep = 0x4a008a08, + .cm_sdma_sdma_clkctrl = 0x4a008a20, + .cm_memif_clkstctrl = 0x4a008b00, + .cm_memif_dmm_clkctrl = 0x4a008b20, + .cm_memif_emif_fw_clkctrl = 0x4a008b28, + .cm_memif_emif_1_clkctrl = 0x4a008b30, + .cm_memif_emif_2_clkctrl = 0x4a008b38, + .cm_memif_dll_clkctrl = 0x4a008b40, + .cm_l4cfg_clkstctrl = 0x4a008d00, + .cm_l4cfg_dynamicdep = 0x4a008d08, + .cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20, + .cm_l4cfg_hw_sem_clkctrl = 0x4a008d28, + .cm_l4cfg_mailbox_clkctrl = 0x4a008d30, + .cm_l4cfg_sar_rom_clkctrl = 0x4a008d38, + .cm_l3instr_clkstctrl = 0x4a008e00, + .cm_l3instr_l3_3_clkctrl = 0x4a008e20, + .cm_l3instr_l3_instr_clkctrl = 0x4a008e28, + .cm_l3instr_intrconn_wp1_clkctrl = 0x4a008e40, + + /* cm2.ivahd */ + .cm_ivahd_clkstctrl = 0x4a008f00, + .cm_ivahd_ivahd_clkctrl = 0x4a008f20, + .cm_ivahd_sl2_clkctrl = 0x4a008f28, + + /* cm2.cam */ + .cm_cam_clkstctrl = 0x4a009000, + .cm_cam_vip1_clkctrl = 0x4a009020, + .cm_cam_vip2_clkctrl = 0x4a009028, + .cm_cam_vip3_clkctrl = 0x4a009030, + .cm_cam_lvdsrx_clkctrl = 0x4a009038, + .cm_cam_csi1_clkctrl = 0x4a009040, + .cm_cam_csi2_clkctrl = 0x4a009048, + + /* cm2.dss */ + .cm_dss_clkstctrl = 0x4a009100, + .cm_dss_dss_clkctrl = 0x4a009120, + + /* cm2.sgx */ + .cm_sgx_clkstctrl = 0x4a009200, + .cm_sgx_sgx_clkctrl = 0x4a009220, + + /* cm2.l3init */ + .cm_l3init_clkstctrl = 0x4a009300, + + /* cm2.l3init */ + .cm_l3init_hsmmc1_clkctrl = 0x4a009328, + .cm_l3init_hsmmc2_clkctrl = 0x4a009330, + .cm_l3init_hsusbhost_clkctrl = 0x4a009340, + .cm_l3init_hsusbotg_clkctrl = 0x4a009348, + .cm_l3init_hsusbtll_clkctrl = 0x4a009350, + .cm_l3init_ocp2scp1_clkctrl = 0x4a0093e0, + + /* cm2.l4per */ + .cm_l4per_clkstctrl = 0x4a009700, + .cm_l4per_dynamicdep = 0x4a009708, + .cm_l4per_gptimer10_clkctrl = 0x4a009728, + .cm_l4per_gptimer11_clkctrl = 0x4a009730, + .cm_l4per_gptimer2_clkctrl = 0x4a009738, + .cm_l4per_gptimer3_clkctrl = 0x4a009740, + .cm_l4per_gptimer4_clkctrl = 0x4a009748, + .cm_l4per_gptimer9_clkctrl = 0x4a009750, + .cm_l4per_elm_clkctrl = 0x4a009758, + .cm_l4per_gpio2_clkctrl = 0x4a009760, + .cm_l4per_gpio3_clkctrl = 0x4a009768, + .cm_l4per_gpio4_clkctrl = 0x4a009770, + .cm_l4per_gpio5_clkctrl = 0x4a009778, + .cm_l4per_gpio6_clkctrl = 0x4a009780, + .cm_l4per_hdq1w_clkctrl = 0x4a009788, + .cm_l4per_i2c1_clkctrl = 0x4a0097a0, + .cm_l4per_i2c2_clkctrl = 0x4a0097a8, + .cm_l4per_i2c3_clkctrl = 0x4a0097b0, + .cm_l4per_i2c4_clkctrl = 0x4a0097b8, + .cm_l4per_l4per_clkctrl = 0x4a0097c0, + .cm_l4per_mcspi1_clkctrl = 0x4a0097f0, + .cm_l4per_mcspi2_clkctrl = 0x4a0097f8, + .cm_l4per_mcspi3_clkctrl = 0x4a009800, + .cm_l4per_mcspi4_clkctrl = 0x4a009808, + .cm_l4per_gpio7_clkctrl = 0x4a009810, + .cm_l4per_gpio8_clkctrl = 0x4a009818, + .cm_l4per_mmcsd3_clkctrl = 0x4a009820, + .cm_l4per_mmcsd4_clkctrl = 0x4a009828, + .cm_l4per_uart1_clkctrl = 0x4a009840, + .cm_l4per_uart2_clkctrl = 0x4a009848, + .cm_l4per_uart3_clkctrl = 0x4a009850, + .cm_l4per_uart4_clkctrl = 0x4a009858, + .cm_l4per_uart5_clkctrl = 0x4a009870, + .cm_l4sec_clkstctrl = 0x4a009880, + .cm_l4sec_staticdep = 0x4a009884, + .cm_l4sec_dynamicdep = 0x4a009888, + .cm_l4sec_aes1_clkctrl = 0x4a0098a0, + .cm_l4sec_aes2_clkctrl = 0x4a0098a8, + .cm_l4sec_des3des_clkctrl = 0x4a0098b0, + .cm_l4sec_rng_clkctrl = 0x4a0098c0, + .cm_l4sec_sha2md51_clkctrl = 0x4a0098c8, + .cm_l4sec_cryptodma_clkctrl = 0x4a0098d8, + + /* l4 wkup regs */ + .cm_abe_pll_ref_clksel = 0x4ae0610c, + .cm_sys_clksel = 0x4ae06110, + .cm_abe_pll_sys_clksel = 0x4ae06118, + .cm_wkup_clkstctrl = 0x4ae07800, + .cm_wkup_l4wkup_clkctrl = 0x4ae07820, + .cm_wkup_wdtimer1_clkctrl = 0x4ae07828, + .cm_wkup_wdtimer2_clkctrl = 0x4ae07830, + .cm_wkup_gpio1_clkctrl = 0x4ae07838, + .cm_wkup_gptimer1_clkctrl = 0x4ae07840, + .cm_wkup_gptimer12_clkctrl = 0x4ae07848, + .cm_wkup_sarram_clkctrl = 0x4ae07860, + .cm_wkup_keyboard_clkctrl = 0x4ae07878, + .cm_wkupaon_scrm_clkctrl = 0x4ae07890, + .prm_rstctrl = 0x4ae07d00, + .prm_rstst = 0x4ae07d04, + .prm_rsttime = 0x4ae07d08, + .prm_vc_val_bypass = 0x4ae07da0, + .prm_vc_cfg_i2c_mode = 0x4ae07db4, + .prm_vc_cfg_i2c_clk = 0x4ae07db8, +}; diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c new file mode 100644 index 0000000..1b445a6 --- /dev/null +++ b/arch/arm/cpu/armv7/omap5/sdram.c @@ -0,0 +1,578 @@ +/* + * Timing and Organization details of the ddr device parts used in OMAP5 + * EVM + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Aneesh V <aneesh@ti.com> + * Sricharan R <r.sricharan@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/emif.h> +#include <asm/arch/sys_proto.h> + +/* + * This file provides details of the LPDDR2 SDRAM parts used on OMAP5 + * EVM. Since the parts used and geometry are identical for + * evm for a given OMAP5 revision, this information is kept + * here instead of being in board directory. However the key functions + * exported are weakly linked so that they can be over-ridden in the board + * directory if there is a OMAP5 board in the future that uses a different + * memory device or geometry. + * + * For any new board with different memory devices over-ride one or more + * of the following functions as per the CONFIG flags you intend to enable: + * - emif_get_reg_dump() + * - emif_get_dmm_regs() + * - emif_get_device_details() + * - emif_get_device_timings() + */ + +#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS +const struct emif_regs emif_regs_532_mhz_2cs = { + .sdram_config_init = 0x80800EBA, + .sdram_config = 0x808022BA, + .ref_ctrl = 0x0000081A, + .sdram_tim1 = 0x772F6873, + .sdram_tim2 = 0x304a129a, + .sdram_tim3 = 0x02f7e45f, + .read_idle_ctrl = 0x00050000, + .zq_config = 0x000b3215, + .temp_alert_config = 0x08000a05, + .emif_ddr_phy_ctlr_1_init = 0x0E28420d, + .emif_ddr_phy_ctlr_1 = 0x0E28420d, + .emif_ddr_ext_phy_ctrl_1 = 0x04020080, + .emif_ddr_ext_phy_ctrl_2 = 0x28C518A3, + .emif_ddr_ext_phy_ctrl_3 = 0x518A3146, + .emif_ddr_ext_phy_ctrl_4 = 0x0014628C, + .emif_ddr_ext_phy_ctrl_5 = 0x04010040 +}; + +const struct emif_regs emif_regs_532_mhz_2cs_es2 = { + .sdram_config_init = 0x80800EBA, + .sdram_config = 0x808022BA, + .ref_ctrl = 0x0000081A, + .sdram_tim1 = 0x772F6873, + .sdram_tim2 = 0x304a129a, + .sdram_tim3 = 0x02f7e45f, + .read_idle_ctrl = 0x00050000, + .zq_config = 0x100b3215, + .temp_alert_config = 0x08000a05, + .emif_ddr_phy_ctlr_1_init = 0x0E30400d, + .emif_ddr_phy_ctlr_1 = 0x0E30400d, + .emif_ddr_ext_phy_ctrl_1 = 0x04020080, + .emif_ddr_ext_phy_ctrl_2 = 0x28C518A3, + .emif_ddr_ext_phy_ctrl_3 = 0x518A3146, + .emif_ddr_ext_phy_ctrl_4 = 0x0014628C, + .emif_ddr_ext_phy_ctrl_5 = 0xC330CC33, +}; + +const struct emif_regs emif_regs_266_mhz_2cs = { + .sdram_config_init = 0x80800EBA, + .sdram_config = 0x808022BA, + .ref_ctrl = 0x0000040D, + .sdram_tim1 = 0x2A86B419, + .sdram_tim2 = 0x1025094A, + .sdram_tim3 = 0x026BA22F, + .read_idle_ctrl = 0x00050000, + .zq_config = 0x000b3215, + .temp_alert_config = 0x08000a05, + .emif_ddr_phy_ctlr_1_init = 0x0E28420d, + .emif_ddr_phy_ctlr_1 = 0x0E28420d, + .emif_ddr_ext_phy_ctrl_1 = 0x04020080, + .emif_ddr_ext_phy_ctrl_2 = 0x0A414829, + .emif_ddr_ext_phy_ctrl_3 = 0x14829052, + .emif_ddr_ext_phy_ctrl_4 = 0x000520A4, + .emif_ddr_ext_phy_ctrl_5 = 0x04010040 +}; + +const struct emif_regs emif_regs_ddr3_532_mhz_1cs = { + .sdram_config_init = 0x61851B32, + .sdram_config = 0x61851B32, + .sdram_config2 = 0x0, + .ref_ctrl = 0x00001035, + .sdram_tim1 = 0xCCCF36B3, + .sdram_tim2 = 0x308F7FDA, + .sdram_tim3 = 0x027F88A8, + .read_idle_ctrl = 0x00050000, + .zq_config = 0x0007190B, + .temp_alert_config = 0x00000000, + .emif_ddr_phy_ctlr_1_init = 0x0020420A, + .emif_ddr_phy_ctlr_1 = 0x0024420A, + .emif_ddr_ext_phy_ctrl_1 = 0x04040100, + .emif_ddr_ext_phy_ctrl_2 = 0x00000000, + .emif_ddr_ext_phy_ctrl_3 = 0x00000000, + .emif_ddr_ext_phy_ctrl_4 = 0x00000000, + .emif_ddr_ext_phy_ctrl_5 = 0x04010040, + .emif_rd_wr_lvl_rmp_win = 0x00000000, + .emif_rd_wr_lvl_rmp_ctl = 0x80000000, + .emif_rd_wr_lvl_ctl = 0x00000000, + .emif_rd_wr_exec_thresh = 0x00000305 +}; + +const struct emif_regs emif_regs_ddr3_532_mhz_1cs_es2 = { + .sdram_config_init = 0x61851B32, + .sdram_config = 0x61851B32, + .sdram_config2 = 0x0, + .ref_ctrl = 0x00001035, + .sdram_tim1 = 0xCCCF36B3, + .sdram_tim2 = 0x308F7FDA, + .sdram_tim3 = 0x027F88A8, + .read_idle_ctrl = 0x00050000, + .zq_config = 0x1007190B, + .temp_alert_config = 0x00000000, + .emif_ddr_phy_ctlr_1_init = 0x0030400A, + .emif_ddr_phy_ctlr_1 = 0x0034400A, + .emif_ddr_ext_phy_ctrl_1 = 0x04040100, + .emif_ddr_ext_phy_ctrl_2 = 0x00000000, + .emif_ddr_ext_phy_ctrl_3 = 0x00000000, + .emif_ddr_ext_phy_ctrl_4 = 0x00000000, + .emif_ddr_ext_phy_ctrl_5 = 0x4350D435, + .emif_rd_wr_lvl_rmp_win = 0x00000000, + .emif_rd_wr_lvl_rmp_ctl = 0x80000000, + .emif_rd_wr_lvl_ctl = 0x00000000, + .emif_rd_wr_exec_thresh = 0x40000305 +}; + +const struct emif_regs emif_1_regs_ddr3_532_mhz_1cs_dra_es1 = { + .sdram_config_init = 0x61851ab2, + .sdram_config = 0x61851ab2, + .sdram_config2 = 0x08000000, + .ref_ctrl = 0x00001035, + .sdram_tim1 = 0xCCCF36B3, + .sdram_tim2 = 0x308F7FDA, + .sdram_tim3 = 0x027F88A8, + .read_idle_ctrl = 0x00050000, + .zq_config = 0x0007190B, + .temp_alert_config = 0x00000000, + .emif_ddr_phy_ctlr_1_init = 0x0E20400A, + .emif_ddr_phy_ctlr_1 = 0x0E24400A, + .emif_ddr_ext_phy_ctrl_1 = 0x04040100, + .emif_ddr_ext_phy_ctrl_2 = 0x009E009E, + .emif_ddr_ext_phy_ctrl_3 = 0x009E009E, + .emif_ddr_ext_phy_ctrl_4 = 0x009E009E, + .emif_ddr_ext_phy_ctrl_5 = 0x009E009E, + .emif_rd_wr_lvl_rmp_win = 0x00000000, + .emif_rd_wr_lvl_rmp_ctl = 0x80000000, + .emif_rd_wr_lvl_ctl = 0x00000000, + .emif_rd_wr_exec_thresh = 0x00000305 +}; + +const struct emif_regs emif_2_regs_ddr3_532_mhz_1cs_dra_es1 = { + .sdram_config_init = 0x61851B32, + .sdram_config = 0x61851B32, + .sdram_config2 = 0x08000000, + .ref_ctrl = 0x00001035, + .sdram_tim1 = 0xCCCF36B3, + .sdram_tim2 = 0x308F7FDA, + .sdram_tim3 = 0x027F88A8, + .read_idle_ctrl = 0x00050000, + .zq_config = 0x0007190B, + .temp_alert_config = 0x00000000, + .emif_ddr_phy_ctlr_1_init = 0x0020400A, + .emif_ddr_phy_ctlr_1 = 0x0E24400A, + .emif_ddr_ext_phy_ctrl_1 = 0x04040100, + .emif_ddr_ext_phy_ctrl_2 = 0x009D009D, + .emif_ddr_ext_phy_ctrl_3 = 0x009D009D, + .emif_ddr_ext_phy_ctrl_4 = 0x009D009D, + .emif_ddr_ext_phy_ctrl_5 = 0x009D009D, + .emif_rd_wr_lvl_rmp_win = 0x00000000, + .emif_rd_wr_lvl_rmp_ctl = 0x80000000, + .emif_rd_wr_lvl_ctl = 0x00000000, + .emif_rd_wr_exec_thresh = 0x00000305 +}; + +const struct dmm_lisa_map_regs lisa_map_4G_x_2_x_2 = { + .dmm_lisa_map_0 = 0x0, + .dmm_lisa_map_1 = 0x0, + .dmm_lisa_map_2 = 0x80740300, + .dmm_lisa_map_3 = 0xFF020100, + .is_ma_present = 0x1 +}; + +/* + * DRA752 EVM board has 1.5 GB of memory + * EMIF1 --> 2Gb * 2 = 512MB + * EMIF2 --> 2Gb * 4 = 1GB + * so mapping 1GB interleaved and 512MB non-interleaved + */ +const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2_2G_x_1_x_2 = { + .dmm_lisa_map_0 = 0x0, + .dmm_lisa_map_1 = 0x80640300, + .dmm_lisa_map_2 = 0xC0500220, + .dmm_lisa_map_3 = 0xFF020100, + .is_ma_present = 0x1 +}; + +/* + * DRA752 EVM EMIF1 ONLY CONFIGURATION + */ +const struct dmm_lisa_map_regs lisa_map_2G_x_1_x_2 = { + .dmm_lisa_map_0 = 0x0, + .dmm_lisa_map_1 = 0x0, + .dmm_lisa_map_2 = 0x80500100, + .dmm_lisa_map_3 = 0xFF020100, + .is_ma_present = 0x1 +}; + +/* + * DRA752 EVM EMIF2 ONLY CONFIGURATION + */ +const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2 = { + .dmm_lisa_map_0 = 0x0, + .dmm_lisa_map_1 = 0x0, + .dmm_lisa_map_2 = 0x80600200, + .dmm_lisa_map_3 = 0xFF020100, + .is_ma_present = 0x1 +}; + +static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs) +{ + switch (omap_revision()) { + case OMAP5430_ES1_0: + *regs = &emif_regs_532_mhz_2cs; + break; + case OMAP5432_ES1_0: + *regs = &emif_regs_ddr3_532_mhz_1cs; + break; + case OMAP5430_ES2_0: + *regs = &emif_regs_532_mhz_2cs_es2; + break; + case OMAP5432_ES2_0: + *regs = &emif_regs_ddr3_532_mhz_1cs_es2; + break; + case DRA752_ES1_0: + switch (emif_nr) { + case 1: + *regs = &emif_1_regs_ddr3_532_mhz_1cs_dra_es1; + break; + case 2: + *regs = &emif_2_regs_ddr3_532_mhz_1cs_dra_es1; + break; + } + break; + default: + *regs = &emif_1_regs_ddr3_532_mhz_1cs_dra_es1; + } +} + +void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs) + __attribute__((weak, alias("emif_get_reg_dump_sdp"))); + +static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs + **dmm_lisa_regs) +{ + switch (omap_revision()) { + case OMAP5430_ES1_0: + case OMAP5430_ES2_0: + case OMAP5432_ES1_0: + case OMAP5432_ES2_0: + *dmm_lisa_regs = &lisa_map_4G_x_2_x_2; + break; + case DRA752_ES1_0: + default: + *dmm_lisa_regs = &lisa_map_2G_x_2_x_2_2G_x_1_x_2; + } + +} + +void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs) + __attribute__((weak, alias("emif_get_dmm_regs_sdp"))); +#else + +static const struct lpddr2_device_details dev_4G_S4_details = { + .type = LPDDR2_TYPE_S4, + .density = LPDDR2_DENSITY_4Gb, + .io_width = LPDDR2_IO_WIDTH_32, + .manufacturer = LPDDR2_MANUFACTURER_SAMSUNG +}; + +static void emif_get_device_details_sdp(u32 emif_nr, + struct lpddr2_device_details *cs0_device_details, + struct lpddr2_device_details *cs1_device_details) +{ + /* EMIF1 & EMIF2 have identical configuration */ + *cs0_device_details = dev_4G_S4_details; + *cs1_device_details = dev_4G_S4_details; +} + +void emif_get_device_details(u32 emif_nr, + struct lpddr2_device_details *cs0_device_details, + struct lpddr2_device_details *cs1_device_details) + __attribute__((weak, alias("emif_get_device_details_sdp"))); + +#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */ + +const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = { + 0x01004010, + 0x00001004, + 0x04010040, + 0x01004010, + 0x00001004, + 0x00000000, + 0x00000000, + 0x00000000, + 0x80080080, + 0x00800800, + 0x08102040, + 0x00000001, + 0x540A8150, + 0xA81502a0, + 0x002A0540, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000077, + 0x0 +}; + +const u32 ddr3_ext_phy_ctrl_const_base_es1[EMIF_EXT_PHY_CTRL_CONST_REG] = { + 0x01004010, + 0x00001004, + 0x04010040, + 0x01004010, + 0x00001004, + 0x00000000, + 0x00000000, + 0x00000000, + 0x80080080, + 0x00800800, + 0x08102040, + 0x00000002, + 0x0, + 0x0, + 0x0, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000057, + 0x0 +}; + +const u32 ddr3_ext_phy_ctrl_const_base_es2[EMIF_EXT_PHY_CTRL_CONST_REG] = { + 0x50D4350D, + 0x00000D43, + 0x04010040, + 0x01004010, + 0x00001004, + 0x00000000, + 0x00000000, + 0x00000000, + 0x80080080, + 0x00800800, + 0x08102040, + 0x00000002, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000057, + 0x0 +}; + +const u32 +dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[EMIF_EXT_PHY_CTRL_CONST_REG] = { + 0x009E009E, + 0x002E002E, + 0x002E002E, + 0x002E002E, + 0x002E002E, + 0x002E002E, + 0x004D004D, + 0x004D004D, + 0x004D004D, + 0x004D004D, + 0x004D004D, + 0x004D004D, + 0x004D004D, + 0x004D004D, + 0x004D004D, + 0x004D004D, + 0x0, + 0x600020, + 0x40010080, + 0x8102040 +}; + +const u32 +dra_ddr3_ext_phy_ctrl_const_base_es1_emif2[EMIF_EXT_PHY_CTRL_CONST_REG] = { + 0x009D009D, + 0x002D002D, + 0x002D002D, + 0x002D002D, + 0x002D002D, + 0x002D002D, + 0x00570057, + 0x00570057, + 0x00570057, + 0x00570057, + 0x00570057, + 0x00570057, + 0x00570057, + 0x00570057, + 0x00570057, + 0x00570057, + 0x0, + 0x600020, + 0x40010080, + 0x8102040 +}; + +const struct lpddr2_mr_regs mr_regs = { + .mr1 = MR1_BL_8_BT_SEQ_WRAP_EN_NWR_8, + .mr2 = 0x6, + .mr3 = 0x1, + .mr10 = MR10_ZQ_ZQINIT, + .mr16 = MR16_REF_FULL_ARRAY +}; + +static void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr, const u32 **regs) +{ + switch (omap_revision()) { + case OMAP5430_ES1_0: + case OMAP5430_ES2_0: + *regs = ext_phy_ctrl_const_base; + break; + case OMAP5432_ES1_0: + *regs = ddr3_ext_phy_ctrl_const_base_es1; + break; + case OMAP5432_ES2_0: + *regs = ddr3_ext_phy_ctrl_const_base_es2; + break; + case DRA752_ES1_0: + if (emif_nr == 1) + *regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif1; + else + *regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif2; + break; + default: + *regs = ddr3_ext_phy_ctrl_const_base_es2; + + } +} + +void get_lpddr2_mr_regs(const struct lpddr2_mr_regs **regs) +{ + *regs = &mr_regs; +} + +void do_ext_phy_settings(u32 base, const struct emif_regs *regs) +{ + u32 *ext_phy_ctrl_base = 0; + u32 *emif_ext_phy_ctrl_base = 0; + u32 emif_nr; + const u32 *ext_phy_ctrl_const_regs; + u32 i = 0; + + emif_nr = (base == EMIF1_BASE) ? 1 : 2; + + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + ext_phy_ctrl_base = (u32 *) &(regs->emif_ddr_ext_phy_ctrl_1); + emif_ext_phy_ctrl_base = (u32 *) &(emif->emif_ddr_ext_phy_ctrl_1); + + /* Configure external phy control timing registers */ + for (i = 0; i < EMIF_EXT_PHY_CTRL_TIMING_REG; i++) { + writel(*ext_phy_ctrl_base, emif_ext_phy_ctrl_base++); + /* Update shadow registers */ + writel(*ext_phy_ctrl_base++, emif_ext_phy_ctrl_base++); + } + + /* + * external phy 6-24 registers do not change with + * ddr frequency + */ + emif_get_ext_phy_ctrl_const_regs(emif_nr, &ext_phy_ctrl_const_regs); + for (i = 0; i < EMIF_EXT_PHY_CTRL_CONST_REG; i++) { + writel(ext_phy_ctrl_const_regs[i], + emif_ext_phy_ctrl_base++); + /* Update shadow registers */ + writel(ext_phy_ctrl_const_regs[i], + emif_ext_phy_ctrl_base++); + } +} + +#ifndef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS +static const struct lpddr2_ac_timings timings_jedec_532_mhz = { + .max_freq = 532000000, + .RL = 8, + .tRPab = 21, + .tRCD = 18, + .tWR = 15, + .tRASmin = 42, + .tRRD = 10, + .tWTRx2 = 15, + .tXSR = 140, + .tXPx2 = 15, + .tRFCab = 130, + .tRTPx2 = 15, + .tCKE = 3, + .tCKESR = 15, + .tZQCS = 90, + .tZQCL = 360, + .tZQINIT = 1000, + .tDQSCKMAXx2 = 11, + .tRASmax = 70, + .tFAW = 50 +}; + +static const struct lpddr2_min_tck min_tck = { + .tRL = 3, + .tRP_AB = 3, + .tRCD = 3, + .tWR = 3, + .tRAS_MIN = 3, + .tRRD = 2, + .tWTR = 2, + .tXP = 2, + .tRTP = 2, + .tCKE = 3, + .tCKESR = 3, + .tFAW = 8 +}; + +static const struct lpddr2_ac_timings *ac_timings[MAX_NUM_SPEEDBINS] = { + &timings_jedec_532_mhz +}; + +static const struct lpddr2_device_timings dev_4G_S4_timings = { + .ac_timings = ac_timings, + .min_tck = &min_tck, +}; + +void emif_get_device_timings_sdp(u32 emif_nr, + const struct lpddr2_device_timings **cs0_device_timings, + const struct lpddr2_device_timings **cs1_device_timings) +{ + /* Identical devices on EMIF1 & EMIF2 */ + *cs0_device_timings = &dev_4G_S4_timings; + *cs1_device_timings = &dev_4G_S4_timings; +} + +void emif_get_device_timings(u32 emif_nr, + const struct lpddr2_device_timings **cs0_device_timings, + const struct lpddr2_device_timings **cs1_device_timings) + __attribute__((weak, alias("emif_get_device_timings_sdp"))); + +#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */ diff --git a/arch/arm/cpu/armv7/rmobile/Makefile b/arch/arm/cpu/armv7/rmobile/Makefile new file mode 100644 index 0000000..c8999bb --- /dev/null +++ b/arch/arm/cpu/armv7/rmobile/Makefile @@ -0,0 +1,65 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +SOBJS = lowlevel_init.o +COBJS-y += cpu_info.o +COBJS-y += emac.o + +COBJS-$(CONFIG_DISPLAY_BOARDINFO) += board.o +COBJS-$(CONFIG_GLOBAL_TIMER) += timer.o +COBJS-$(CONFIG_R8A7740) += cpu_info-r8a7740.o +COBJS-$(CONFIG_R8A7740) += pfc-r8a7740.o +COBJS-$(CONFIG_SH73A0) += cpu_info-sh73a0.o +COBJS-$(CONFIG_SH73A0) += pfc-sh73a0.o +COBJS_LN-$(CONFIG_TMU_TIMER) += sh_timer.o + +COBJS := $(COBJS-y) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) $(addprefix $(obj),$(COBJS_LN-y:.o=.c)) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS) $(COBJS_LN-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +# from arch/sh/lib/ directory +$(obj)sh_timer.c: + @rm -f $(obj)sh_timer.c + ln -s $(SRCTREE)/arch/sh/lib/time.c $(obj)sh_timer.c + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### + diff --git a/arch/arm/cpu/armv7/rmobile/board.c b/arch/arm/cpu/armv7/rmobile/board.c new file mode 100644 index 0000000..2622590 --- /dev/null +++ b/arch/arm/cpu/armv7/rmobile/board.c @@ -0,0 +1,31 @@ +/* + * (C) Copyright 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> + * (C) Copyright 2012 Renesas Solutions Corp. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> + +int checkboard(void) +{ + printf("Board: %s\n", sysinfo.board_string); + return 0; +} diff --git a/arch/arm/cpu/armv7/rmobile/config.mk b/arch/arm/cpu/armv7/rmobile/config.mk new file mode 100644 index 0000000..1da0227 --- /dev/null +++ b/arch/arm/cpu/armv7/rmobile/config.mk @@ -0,0 +1,26 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float + +# Make ARMv5 to allow more compilers to work, even though its v7a. +PLATFORM_CPPFLAGS += -march=armv5 diff --git a/arch/arm/cpu/armv7/rmobile/cpu_info-r8a7740.c b/arch/arm/cpu/armv7/rmobile/cpu_info-r8a7740.c new file mode 100644 index 0000000..2231402 --- /dev/null +++ b/arch/arm/cpu/armv7/rmobile/cpu_info-r8a7740.c @@ -0,0 +1,48 @@ +/* + * (C) Copyright 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> + * (C) Copyright 2012 Renesas Solutions Corp. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/io.h> + +u32 rmobile_get_cpu_type(void) +{ + u32 id; + u32 type; + struct r8a7740_hpb *hpb = (struct r8a7740_hpb *)HPB_BASE; + + id = readl(hpb->cccr); + type = (id >> 8) & 0xFF; + + return type; +} + +u32 rmobile_get_cpu_rev(void) +{ + u32 id; + u32 rev; + struct r8a7740_hpb *hpb = (struct r8a7740_hpb *)HPB_BASE; + + id = readl(hpb->cccr); + rev = (id >> 4) & 0xF; + + return rev; +} diff --git a/arch/arm/cpu/armv7/rmobile/cpu_info-sh73a0.c b/arch/arm/cpu/armv7/rmobile/cpu_info-sh73a0.c new file mode 100644 index 0000000..2e7ed49 --- /dev/null +++ b/arch/arm/cpu/armv7/rmobile/cpu_info-sh73a0.c @@ -0,0 +1,60 @@ +/* + * (C) Copyright 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> + * (C) Copyright 2012 Renesas Solutions Corp. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/io.h> + +u32 rmobile_get_cpu_type(void) +{ + u32 id; + u32 type; + struct sh73a0_hpb *hpb = (struct sh73a0_hpb *)HPB_BASE; + + id = readl(&hpb->cccr); + type = (id >> 8) & 0xFF; + + return type; +} + +u32 rmobile_get_cpu_rev_integer(void) +{ + u32 id; + u32 rev; + struct sh73a0_hpb *hpb = (struct sh73a0_hpb *)HPB_BASE; + + id = readl(&hpb->cccr); + rev = ((id >> 4) & 0xF) + 1; + + return rev; +} + +u32 rmobile_get_cpu_rev_fraction(void) +{ + u32 id; + u32 rev; + struct sh73a0_hpb *hpb = (struct sh73a0_hpb *)HPB_BASE; + + id = readl(&hpb->cccr); + rev = id & 0xF; + + return rev; +} diff --git a/arch/arm/cpu/armv7/rmobile/cpu_info.c b/arch/arm/cpu/armv7/rmobile/cpu_info.c new file mode 100644 index 0000000..0e2b82e --- /dev/null +++ b/arch/arm/cpu/armv7/rmobile/cpu_info.c @@ -0,0 +1,85 @@ +/* + * (C) Copyright 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> + * (C) Copyright 2012 Renesas Solutions Corp. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/io.h> + +#ifdef CONFIG_ARCH_CPU_INIT +int arch_cpu_init(void) +{ + icache_enable(); + return 0; +} +#endif + +#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{ + dcache_enable(); +} +#endif + +#ifdef CONFIG_DISPLAY_CPUINFO +static u32 __rmobile_get_cpu_type(void) +{ + return 0x0; +} +u32 rmobile_get_cpu_type(void) + __attribute__((weak, alias("__rmobile_get_cpu_type"))); + +static u32 __rmobile_get_cpu_rev_integer(void) +{ + return 0; +} +u32 rmobile_get_cpu_rev_integer(void) + __attribute__((weak, alias("__rmobile_get_cpu_rev_integer"))); + +static u32 __rmobile_get_cpu_rev_fraction(void) +{ + return 0; +} +u32 rmobile_get_cpu_rev_fraction(void) + __attribute__((weak, alias("__rmobile_get_cpu_rev_fraction"))); + +int print_cpuinfo(void) +{ + switch (rmobile_get_cpu_type()) { + case 0x37: + printf("CPU: Renesas Electronics SH73A0 rev %d.%d\n", + rmobile_get_cpu_rev_integer(), + rmobile_get_cpu_rev_fraction()); + break; + case 0x40: + printf("CPU: Renesas Electronics R8A7740 rev %d.%d\n", + rmobile_get_cpu_rev_integer(), + rmobile_get_cpu_rev_fraction()); + break; + + default: + printf("CPU: Renesas Electronics CPU rev %d.%d\n", + rmobile_get_cpu_rev_integer(), + rmobile_get_cpu_rev_fraction()); + break; + } + return 0; +} +#endif /* CONFIG_DISPLAY_CPUINFO */ diff --git a/arch/arm/cpu/armv7/rmobile/emac.c b/arch/arm/cpu/armv7/rmobile/emac.c new file mode 100644 index 0000000..da5269e --- /dev/null +++ b/arch/arm/cpu/armv7/rmobile/emac.c @@ -0,0 +1,36 @@ +/* + * RMOBILE EtherMAC initialization. + * + * Copyright (C) 2012 Renesas Solutions Corp. + * Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include <common.h> +#include <asm/errno.h> +#include <netdev.h> + +int cpu_eth_init(bd_t *bis) +{ + int ret = -ENODEV; +#ifdef CONFIG_SH_ETHER + ret = sh_eth_initialize(bis); +#endif + return ret; +} diff --git a/arch/arm/cpu/armv7/rmobile/lowlevel_init.S b/arch/arm/cpu/armv7/rmobile/lowlevel_init.S new file mode 100644 index 0000000..4fdca06 --- /dev/null +++ b/arch/arm/cpu/armv7/rmobile/lowlevel_init.S @@ -0,0 +1,88 @@ +/* + * Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.Iwamatsu.yj@renesas.com> + * Copyright (C) 2012 Renesas Solutions Corp. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <linux/linkage.h> + +ENTRY(lowlevel_init) + ldr r0, =MERAM_BASE + mov r1, #0x0 + str r1, [r0] + + mrc p15, 0, r0, c0, c0, 5 + ands r0, r0, #0xF + beq lowlevel_init__ + b wait_interrupt + + .pool + .align 4 + +wait_interrupt: +#ifdef ICCICR + ldr r1, =ICCICR + mov r2, #0x0 + str r2, [r1] + mov r2, #0xF0 + adds r1, r1, #4 /* ICCPMR */ + str r2, [r1] + ldr r1, =ICCICR + mov r2, #0x1 + str r2, [r1] +#endif + +wait_loop: + .long 0xE320F003 /* wfi */ + + ldr r2, [r1, #0xC] + str r2, [r1, #0x10] + + ldr r0, =MERAM_BASE + ldr r2, [r0] + cmp r2, #0 + movne pc, r2 + + b wait_loop + +wait_loop_end: + .pool + .align 4 + +lowlevel_init__: + + mov r0, #0x200000 + +loop0: + subs r0, r0, #1 + bne loop0 + + ldr sp, MERAM_STACK + b s_init + + .pool + .align 4 + +ENDPROC(lowlevel_init) + .ltorg + +MERAM_STACK: + .word LOW_LEVEL_MERAM_STACK diff --git a/arch/arm/cpu/armv7/rmobile/pfc-r8a7740.c b/arch/arm/cpu/armv7/rmobile/pfc-r8a7740.c new file mode 100644 index 0000000..5d42a68 --- /dev/null +++ b/arch/arm/cpu/armv7/rmobile/pfc-r8a7740.c @@ -0,0 +1,2612 @@ +/* + * R8A7740 processor support + * + * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2011 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the + * License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include <common.h> +#include <sh_pfc.h> +#include <asm/gpio.h> +#include <asm/arch/irqs.h> + +#define CPU_ALL_PORT(fn, pfx, sfx) \ + PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx), \ + PORT_10(fn, pfx##10, sfx), PORT_90(fn, pfx##1, sfx), \ + PORT_10(fn, pfx##20, sfx), \ + PORT_1(fn, pfx##210, sfx), PORT_1(fn, pfx##211, sfx) + +enum { + PINMUX_RESERVED = 0, + + /* PORT0_DATA -> PORT211_DATA */ + PINMUX_DATA_BEGIN, + PORT_ALL(DATA), + PINMUX_DATA_END, + + /* PORT0_IN -> PORT211_IN */ + PINMUX_INPUT_BEGIN, + PORT_ALL(IN), + PINMUX_INPUT_END, + + /* PORT0_IN_PU -> PORT211_IN_PU */ + PINMUX_INPUT_PULLUP_BEGIN, + PORT_ALL(IN_PU), + PINMUX_INPUT_PULLUP_END, + + /* PORT0_IN_PD -> PORT211_IN_PD */ + PINMUX_INPUT_PULLDOWN_BEGIN, + PORT_ALL(IN_PD), + PINMUX_INPUT_PULLDOWN_END, + + /* PORT0_OUT -> PORT211_OUT */ + PINMUX_OUTPUT_BEGIN, + PORT_ALL(OUT), + PINMUX_OUTPUT_END, + + PINMUX_FUNCTION_BEGIN, + PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT211_FN_IN */ + PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT211_FN_OUT */ + PORT_ALL(FN0), /* PORT0_FN0 -> PORT211_FN0 */ + PORT_ALL(FN1), /* PORT0_FN1 -> PORT211_FN1 */ + PORT_ALL(FN2), /* PORT0_FN2 -> PORT211_FN2 */ + PORT_ALL(FN3), /* PORT0_FN3 -> PORT211_FN3 */ + PORT_ALL(FN4), /* PORT0_FN4 -> PORT211_FN4 */ + PORT_ALL(FN5), /* PORT0_FN5 -> PORT211_FN5 */ + PORT_ALL(FN6), /* PORT0_FN6 -> PORT211_FN6 */ + PORT_ALL(FN7), /* PORT0_FN7 -> PORT211_FN7 */ + + MSEL1CR_31_0, MSEL1CR_31_1, + MSEL1CR_30_0, MSEL1CR_30_1, + MSEL1CR_29_0, MSEL1CR_29_1, + MSEL1CR_28_0, MSEL1CR_28_1, + MSEL1CR_27_0, MSEL1CR_27_1, + MSEL1CR_26_0, MSEL1CR_26_1, + MSEL1CR_16_0, MSEL1CR_16_1, + MSEL1CR_15_0, MSEL1CR_15_1, + MSEL1CR_14_0, MSEL1CR_14_1, + MSEL1CR_13_0, MSEL1CR_13_1, + MSEL1CR_12_0, MSEL1CR_12_1, + MSEL1CR_9_0, MSEL1CR_9_1, + MSEL1CR_7_0, MSEL1CR_7_1, + MSEL1CR_6_0, MSEL1CR_6_1, + MSEL1CR_5_0, MSEL1CR_5_1, + MSEL1CR_4_0, MSEL1CR_4_1, + MSEL1CR_3_0, MSEL1CR_3_1, + MSEL1CR_2_0, MSEL1CR_2_1, + MSEL1CR_0_0, MSEL1CR_0_1, + + MSEL3CR_15_0, MSEL3CR_15_1, /* Trace / Debug ? */ + MSEL3CR_6_0, MSEL3CR_6_1, + + MSEL4CR_19_0, MSEL4CR_19_1, + MSEL4CR_18_0, MSEL4CR_18_1, + MSEL4CR_15_0, MSEL4CR_15_1, + MSEL4CR_10_0, MSEL4CR_10_1, + MSEL4CR_6_0, MSEL4CR_6_1, + MSEL4CR_4_0, MSEL4CR_4_1, + MSEL4CR_1_0, MSEL4CR_1_1, + + MSEL5CR_31_0, MSEL5CR_31_1, /* irq/fiq output */ + MSEL5CR_30_0, MSEL5CR_30_1, + MSEL5CR_29_0, MSEL5CR_29_1, + MSEL5CR_27_0, MSEL5CR_27_1, + MSEL5CR_25_0, MSEL5CR_25_1, + MSEL5CR_23_0, MSEL5CR_23_1, + MSEL5CR_21_0, MSEL5CR_21_1, + MSEL5CR_19_0, MSEL5CR_19_1, + MSEL5CR_17_0, MSEL5CR_17_1, + MSEL5CR_15_0, MSEL5CR_15_1, + MSEL5CR_14_0, MSEL5CR_14_1, + MSEL5CR_13_0, MSEL5CR_13_1, + MSEL5CR_12_0, MSEL5CR_12_1, + MSEL5CR_11_0, MSEL5CR_11_1, + MSEL5CR_10_0, MSEL5CR_10_1, + MSEL5CR_8_0, MSEL5CR_8_1, + MSEL5CR_7_0, MSEL5CR_7_1, + MSEL5CR_6_0, MSEL5CR_6_1, + MSEL5CR_5_0, MSEL5CR_5_1, + MSEL5CR_4_0, MSEL5CR_4_1, + MSEL5CR_3_0, MSEL5CR_3_1, + MSEL5CR_2_0, MSEL5CR_2_1, + MSEL5CR_0_0, MSEL5CR_0_1, + PINMUX_FUNCTION_END, + + PINMUX_MARK_BEGIN, + + /* IRQ */ + IRQ0_PORT2_MARK, IRQ0_PORT13_MARK, + IRQ1_MARK, + IRQ2_PORT11_MARK, IRQ2_PORT12_MARK, + IRQ3_PORT10_MARK, IRQ3_PORT14_MARK, + IRQ4_PORT15_MARK, IRQ4_PORT172_MARK, + IRQ5_PORT0_MARK, IRQ5_PORT1_MARK, + IRQ6_PORT121_MARK, IRQ6_PORT173_MARK, + IRQ7_PORT120_MARK, IRQ7_PORT209_MARK, + IRQ8_MARK, + IRQ9_PORT118_MARK, IRQ9_PORT210_MARK, + IRQ10_MARK, + IRQ11_MARK, + IRQ12_PORT42_MARK, IRQ12_PORT97_MARK, + IRQ13_PORT64_MARK, IRQ13_PORT98_MARK, + IRQ14_PORT63_MARK, IRQ14_PORT99_MARK, + IRQ15_PORT62_MARK, IRQ15_PORT100_MARK, + IRQ16_PORT68_MARK, IRQ16_PORT211_MARK, + IRQ17_MARK, + IRQ18_MARK, + IRQ19_MARK, + IRQ20_MARK, + IRQ21_MARK, + IRQ22_MARK, + IRQ23_MARK, + IRQ24_MARK, + IRQ25_MARK, + IRQ26_PORT58_MARK, IRQ26_PORT81_MARK, + IRQ27_PORT57_MARK, IRQ27_PORT168_MARK, + IRQ28_PORT56_MARK, IRQ28_PORT169_MARK, + IRQ29_PORT50_MARK, IRQ29_PORT170_MARK, + IRQ30_PORT49_MARK, IRQ30_PORT171_MARK, + IRQ31_PORT41_MARK, IRQ31_PORT167_MARK, + + /* Function */ + + /* DBGT */ + DBGMDT2_MARK, DBGMDT1_MARK, DBGMDT0_MARK, + DBGMD10_MARK, DBGMD11_MARK, DBGMD20_MARK, + DBGMD21_MARK, + + /* FSI */ + FSIAISLD_PORT0_MARK, /* FSIAISLD Port 0/5 */ + FSIAISLD_PORT5_MARK, + FSIASPDIF_PORT9_MARK, /* FSIASPDIF Port 9/18 */ + FSIASPDIF_PORT18_MARK, + FSIAOSLD1_MARK, FSIAOSLD2_MARK, FSIAOLR_MARK, + FSIAOBT_MARK, FSIAOSLD_MARK, FSIAOMC_MARK, + FSIACK_MARK, FSIAILR_MARK, FSIAIBT_MARK, + + /* FMSI */ + FMSISLD_PORT1_MARK, /* FMSISLD Port 1/6 */ + FMSISLD_PORT6_MARK, + FMSIILR_MARK, FMSIIBT_MARK, FMSIOLR_MARK, FMSIOBT_MARK, + FMSICK_MARK, FMSOILR_MARK, FMSOIBT_MARK, FMSOOLR_MARK, + FMSOOBT_MARK, FMSOSLD_MARK, FMSOCK_MARK, + + /* SCIFA0 */ + SCIFA0_SCK_MARK, SCIFA0_CTS_MARK, SCIFA0_RTS_MARK, + SCIFA0_RXD_MARK, SCIFA0_TXD_MARK, + + /* SCIFA1 */ + SCIFA1_CTS_MARK, SCIFA1_SCK_MARK, SCIFA1_RXD_MARK, + SCIFA1_TXD_MARK, SCIFA1_RTS_MARK, + + /* SCIFA2 */ + SCIFA2_SCK_PORT22_MARK, /* SCIFA2_SCK Port 22/199 */ + SCIFA2_SCK_PORT199_MARK, + SCIFA2_RXD_MARK, SCIFA2_TXD_MARK, + SCIFA2_CTS_MARK, SCIFA2_RTS_MARK, + + /* SCIFA3 */ + SCIFA3_RTS_PORT105_MARK, /* MSEL5CR_8_0 */ + SCIFA3_SCK_PORT116_MARK, + SCIFA3_CTS_PORT117_MARK, + SCIFA3_RXD_PORT174_MARK, + SCIFA3_TXD_PORT175_MARK, + + SCIFA3_RTS_PORT161_MARK, /* MSEL5CR_8_1 */ + SCIFA3_SCK_PORT158_MARK, + SCIFA3_CTS_PORT162_MARK, + SCIFA3_RXD_PORT159_MARK, + SCIFA3_TXD_PORT160_MARK, + + /* SCIFA4 */ + SCIFA4_RXD_PORT12_MARK, /* MSEL5CR[12:11] = 00 */ + SCIFA4_TXD_PORT13_MARK, + + SCIFA4_RXD_PORT204_MARK, /* MSEL5CR[12:11] = 01 */ + SCIFA4_TXD_PORT203_MARK, + + SCIFA4_RXD_PORT94_MARK, /* MSEL5CR[12:11] = 10 */ + SCIFA4_TXD_PORT93_MARK, + + SCIFA4_SCK_PORT21_MARK, /* SCIFA4_SCK Port 21/205 */ + SCIFA4_SCK_PORT205_MARK, + + /* SCIFA5 */ + SCIFA5_TXD_PORT20_MARK, /* MSEL5CR[15:14] = 00 */ + SCIFA5_RXD_PORT10_MARK, + + SCIFA5_RXD_PORT207_MARK, /* MSEL5CR[15:14] = 01 */ + SCIFA5_TXD_PORT208_MARK, + + SCIFA5_TXD_PORT91_MARK, /* MSEL5CR[15:14] = 10 */ + SCIFA5_RXD_PORT92_MARK, + + SCIFA5_SCK_PORT23_MARK, /* SCIFA5_SCK Port 23/206 */ + SCIFA5_SCK_PORT206_MARK, + + /* SCIFA6 */ + SCIFA6_SCK_MARK, SCIFA6_RXD_MARK, SCIFA6_TXD_MARK, + + /* SCIFA7 */ + SCIFA7_TXD_MARK, SCIFA7_RXD_MARK, + + /* SCIFAB */ + SCIFB_SCK_PORT190_MARK, /* MSEL5CR_17_0 */ + SCIFB_RXD_PORT191_MARK, + SCIFB_TXD_PORT192_MARK, + SCIFB_RTS_PORT186_MARK, + SCIFB_CTS_PORT187_MARK, + + SCIFB_SCK_PORT2_MARK, /* MSEL5CR_17_1 */ + SCIFB_RXD_PORT3_MARK, + SCIFB_TXD_PORT4_MARK, + SCIFB_RTS_PORT172_MARK, + SCIFB_CTS_PORT173_MARK, + + /* LCD0 */ + LCDC0_SELECT_MARK, + + LCD0_D0_MARK, LCD0_D1_MARK, LCD0_D2_MARK, LCD0_D3_MARK, + LCD0_D4_MARK, LCD0_D5_MARK, LCD0_D6_MARK, LCD0_D7_MARK, + LCD0_D8_MARK, LCD0_D9_MARK, LCD0_D10_MARK, LCD0_D11_MARK, + LCD0_D12_MARK, LCD0_D13_MARK, LCD0_D14_MARK, LCD0_D15_MARK, + LCD0_D16_MARK, LCD0_D17_MARK, + LCD0_DON_MARK, LCD0_VCPWC_MARK, LCD0_VEPWC_MARK, + LCD0_DCK_MARK, LCD0_VSYN_MARK, /* for RGB */ + LCD0_HSYN_MARK, LCD0_DISP_MARK, /* for RGB */ + LCD0_WR_MARK, LCD0_RD_MARK, /* for SYS */ + LCD0_CS_MARK, LCD0_RS_MARK, /* for SYS */ + + LCD0_D21_PORT158_MARK, LCD0_D23_PORT159_MARK, /* MSEL5CR_6_1 */ + LCD0_D22_PORT160_MARK, LCD0_D20_PORT161_MARK, + LCD0_D19_PORT162_MARK, LCD0_D18_PORT163_MARK, + LCD0_LCLK_PORT165_MARK, + + LCD0_D18_PORT40_MARK, LCD0_D22_PORT0_MARK, /* MSEL5CR_6_0 */ + LCD0_D23_PORT1_MARK, LCD0_D21_PORT2_MARK, + LCD0_D20_PORT3_MARK, LCD0_D19_PORT4_MARK, + LCD0_LCLK_PORT102_MARK, + + /* LCD1 */ + LCDC1_SELECT_MARK, + + LCD1_D0_MARK, LCD1_D1_MARK, LCD1_D2_MARK, LCD1_D3_MARK, + LCD1_D4_MARK, LCD1_D5_MARK, LCD1_D6_MARK, LCD1_D7_MARK, + LCD1_D8_MARK, LCD1_D9_MARK, LCD1_D10_MARK, LCD1_D11_MARK, + LCD1_D12_MARK, LCD1_D13_MARK, LCD1_D14_MARK, LCD1_D15_MARK, + LCD1_D16_MARK, LCD1_D17_MARK, LCD1_D18_MARK, LCD1_D19_MARK, + LCD1_D20_MARK, LCD1_D21_MARK, LCD1_D22_MARK, LCD1_D23_MARK, + LCD1_DON_MARK, LCD1_VCPWC_MARK, + LCD1_LCLK_MARK, LCD1_VEPWC_MARK, + + LCD1_DCK_MARK, LCD1_VSYN_MARK, /* for RGB */ + LCD1_HSYN_MARK, LCD1_DISP_MARK, /* for RGB */ + LCD1_RS_MARK, LCD1_CS_MARK, /* for SYS */ + LCD1_RD_MARK, LCD1_WR_MARK, /* for SYS */ + + /* RSPI */ + RSPI_SSL0_A_MARK, RSPI_SSL1_A_MARK, RSPI_SSL2_A_MARK, + RSPI_SSL3_A_MARK, RSPI_CK_A_MARK, RSPI_MOSI_A_MARK, + RSPI_MISO_A_MARK, + + /* VIO CKO */ + VIO_CKO1_MARK, /* needs fixup */ + VIO_CKO2_MARK, + VIO_CKO_1_MARK, + VIO_CKO_MARK, + + /* VIO0 */ + VIO0_D0_MARK, VIO0_D1_MARK, VIO0_D2_MARK, VIO0_D3_MARK, + VIO0_D4_MARK, VIO0_D5_MARK, VIO0_D6_MARK, VIO0_D7_MARK, + VIO0_D8_MARK, VIO0_D9_MARK, VIO0_D10_MARK, VIO0_D11_MARK, + VIO0_D12_MARK, VIO0_VD_MARK, VIO0_HD_MARK, VIO0_CLK_MARK, + VIO0_FIELD_MARK, + + VIO0_D13_PORT26_MARK, /* MSEL5CR_27_0 */ + VIO0_D14_PORT25_MARK, + VIO0_D15_PORT24_MARK, + + VIO0_D13_PORT22_MARK, /* MSEL5CR_27_1 */ + VIO0_D14_PORT95_MARK, + VIO0_D15_PORT96_MARK, + + /* VIO1 */ + VIO1_D0_MARK, VIO1_D1_MARK, VIO1_D2_MARK, VIO1_D3_MARK, + VIO1_D4_MARK, VIO1_D5_MARK, VIO1_D6_MARK, VIO1_D7_MARK, + VIO1_VD_MARK, VIO1_HD_MARK, VIO1_CLK_MARK, VIO1_FIELD_MARK, + + /* TPU0 */ + TPU0TO0_MARK, TPU0TO1_MARK, TPU0TO3_MARK, + TPU0TO2_PORT66_MARK, /* TPU0TO2 Port 66/202 */ + TPU0TO2_PORT202_MARK, + + /* SSP1 0 */ + STP0_IPD0_MARK, STP0_IPD1_MARK, STP0_IPD2_MARK, STP0_IPD3_MARK, + STP0_IPD4_MARK, STP0_IPD5_MARK, STP0_IPD6_MARK, STP0_IPD7_MARK, + STP0_IPEN_MARK, STP0_IPCLK_MARK, STP0_IPSYNC_MARK, + + /* SSP1 1 */ + STP1_IPD1_MARK, STP1_IPD2_MARK, STP1_IPD3_MARK, STP1_IPD4_MARK, + STP1_IPD5_MARK, STP1_IPD6_MARK, STP1_IPD7_MARK, STP1_IPCLK_MARK, + STP1_IPSYNC_MARK, + + STP1_IPD0_PORT186_MARK, /* MSEL5CR_23_0 */ + STP1_IPEN_PORT187_MARK, + + STP1_IPD0_PORT194_MARK, /* MSEL5CR_23_1 */ + STP1_IPEN_PORT193_MARK, + + /* SIM */ + SIM_RST_MARK, SIM_CLK_MARK, + SIM_D_PORT22_MARK, /* SIM_D Port 22/199 */ + SIM_D_PORT199_MARK, + + /* SDHI0 */ + SDHI0_D0_MARK, SDHI0_D1_MARK, SDHI0_D2_MARK, SDHI0_D3_MARK, + SDHI0_CD_MARK, SDHI0_WP_MARK, SDHI0_CMD_MARK, SDHI0_CLK_MARK, + + /* SDHI1 */ + SDHI1_D0_MARK, SDHI1_D1_MARK, SDHI1_D2_MARK, SDHI1_D3_MARK, + SDHI1_CD_MARK, SDHI1_WP_MARK, SDHI1_CMD_MARK, SDHI1_CLK_MARK, + + /* SDHI2 */ + SDHI2_D0_MARK, SDHI2_D1_MARK, SDHI2_D2_MARK, SDHI2_D3_MARK, + SDHI2_CLK_MARK, SDHI2_CMD_MARK, + + SDHI2_CD_PORT24_MARK, /* MSEL5CR_19_0 */ + SDHI2_WP_PORT25_MARK, + + SDHI2_WP_PORT177_MARK, /* MSEL5CR_19_1 */ + SDHI2_CD_PORT202_MARK, + + /* MSIOF2 */ + MSIOF2_TXD_MARK, MSIOF2_RXD_MARK, MSIOF2_TSCK_MARK, + MSIOF2_SS2_MARK, MSIOF2_TSYNC_MARK, MSIOF2_SS1_MARK, + MSIOF2_MCK1_MARK, MSIOF2_MCK0_MARK, MSIOF2_RSYNC_MARK, + MSIOF2_RSCK_MARK, + + /* KEYSC */ + KEYIN4_MARK, KEYIN5_MARK, KEYIN6_MARK, KEYIN7_MARK, + KEYOUT0_MARK, KEYOUT1_MARK, KEYOUT2_MARK, KEYOUT3_MARK, + KEYOUT4_MARK, KEYOUT5_MARK, KEYOUT6_MARK, KEYOUT7_MARK, + + KEYIN0_PORT43_MARK, /* MSEL4CR_18_0 */ + KEYIN1_PORT44_MARK, + KEYIN2_PORT45_MARK, + KEYIN3_PORT46_MARK, + + KEYIN0_PORT58_MARK, /* MSEL4CR_18_1 */ + KEYIN1_PORT57_MARK, + KEYIN2_PORT56_MARK, + KEYIN3_PORT55_MARK, + + /* VOU */ + DV_D0_MARK, DV_D1_MARK, DV_D2_MARK, DV_D3_MARK, + DV_D4_MARK, DV_D5_MARK, DV_D6_MARK, DV_D7_MARK, + DV_D8_MARK, DV_D9_MARK, DV_D10_MARK, DV_D11_MARK, + DV_D12_MARK, DV_D13_MARK, DV_D14_MARK, DV_D15_MARK, + DV_CLK_MARK, DV_VSYNC_MARK, DV_HSYNC_MARK, + + /* MEMC */ + MEMC_AD0_MARK, MEMC_AD1_MARK, MEMC_AD2_MARK, MEMC_AD3_MARK, + MEMC_AD4_MARK, MEMC_AD5_MARK, MEMC_AD6_MARK, MEMC_AD7_MARK, + MEMC_AD8_MARK, MEMC_AD9_MARK, MEMC_AD10_MARK, MEMC_AD11_MARK, + MEMC_AD12_MARK, MEMC_AD13_MARK, MEMC_AD14_MARK, MEMC_AD15_MARK, + MEMC_CS0_MARK, MEMC_INT_MARK, MEMC_NWE_MARK, MEMC_NOE_MARK, + + MEMC_CS1_MARK, /* MSEL4CR_6_0 */ + MEMC_ADV_MARK, + MEMC_WAIT_MARK, + MEMC_BUSCLK_MARK, + + MEMC_A1_MARK, /* MSEL4CR_6_1 */ + MEMC_DREQ0_MARK, + MEMC_DREQ1_MARK, + MEMC_A0_MARK, + + /* MMC */ + MMC0_D0_PORT68_MARK, MMC0_D1_PORT69_MARK, MMC0_D2_PORT70_MARK, + MMC0_D3_PORT71_MARK, MMC0_D4_PORT72_MARK, MMC0_D5_PORT73_MARK, + MMC0_D6_PORT74_MARK, MMC0_D7_PORT75_MARK, MMC0_CLK_PORT66_MARK, + MMC0_CMD_PORT67_MARK, /* MSEL4CR_15_0 */ + + MMC1_D0_PORT149_MARK, MMC1_D1_PORT148_MARK, MMC1_D2_PORT147_MARK, + MMC1_D3_PORT146_MARK, MMC1_D4_PORT145_MARK, MMC1_D5_PORT144_MARK, + MMC1_D6_PORT143_MARK, MMC1_D7_PORT142_MARK, MMC1_CLK_PORT103_MARK, + MMC1_CMD_PORT104_MARK, /* MSEL4CR_15_1 */ + + /* MSIOF0 */ + MSIOF0_SS1_MARK, MSIOF0_SS2_MARK, MSIOF0_RXD_MARK, + MSIOF0_TXD_MARK, MSIOF0_MCK0_MARK, MSIOF0_MCK1_MARK, + MSIOF0_RSYNC_MARK, MSIOF0_RSCK_MARK, MSIOF0_TSCK_MARK, + MSIOF0_TSYNC_MARK, + + /* MSIOF1 */ + MSIOF1_RSCK_MARK, MSIOF1_RSYNC_MARK, + MSIOF1_MCK0_MARK, MSIOF1_MCK1_MARK, + + MSIOF1_SS2_PORT116_MARK, MSIOF1_SS1_PORT117_MARK, + MSIOF1_RXD_PORT118_MARK, MSIOF1_TXD_PORT119_MARK, + MSIOF1_TSYNC_PORT120_MARK, + MSIOF1_TSCK_PORT121_MARK, /* MSEL4CR_10_0 */ + + MSIOF1_SS1_PORT67_MARK, MSIOF1_TSCK_PORT72_MARK, + MSIOF1_TSYNC_PORT73_MARK, MSIOF1_TXD_PORT74_MARK, + MSIOF1_RXD_PORT75_MARK, + MSIOF1_SS2_PORT202_MARK, /* MSEL4CR_10_1 */ + + /* GPIO */ + GPO0_MARK, GPI0_MARK, GPO1_MARK, GPI1_MARK, + + /* USB0 */ + USB0_OCI_MARK, USB0_PPON_MARK, VBUS_MARK, + + /* USB1 */ + USB1_OCI_MARK, USB1_PPON_MARK, + + /* BBIF1 */ + BBIF1_RXD_MARK, BBIF1_TXD_MARK, BBIF1_TSYNC_MARK, + BBIF1_TSCK_MARK, BBIF1_RSCK_MARK, BBIF1_RSYNC_MARK, + BBIF1_FLOW_MARK, BBIF1_RX_FLOW_N_MARK, + + /* BBIF2 */ + BBIF2_TXD2_PORT5_MARK, /* MSEL5CR_0_0 */ + BBIF2_RXD2_PORT60_MARK, + BBIF2_TSYNC2_PORT6_MARK, + BBIF2_TSCK2_PORT59_MARK, + + BBIF2_RXD2_PORT90_MARK, /* MSEL5CR_0_1 */ + BBIF2_TXD2_PORT183_MARK, + BBIF2_TSCK2_PORT89_MARK, + BBIF2_TSYNC2_PORT184_MARK, + + /* BSC / FLCTL / PCMCIA */ + CS0_MARK, CS2_MARK, CS4_MARK, + CS5B_MARK, CS6A_MARK, + CS5A_PORT105_MARK, /* CS5A PORT 19/105 */ + CS5A_PORT19_MARK, + IOIS16_MARK, /* ? */ + + A0_MARK, A1_MARK, A2_MARK, A3_MARK, + A4_FOE_MARK, /* share with FLCTL */ + A5_FCDE_MARK, /* share with FLCTL */ + A6_MARK, A7_MARK, A8_MARK, A9_MARK, + A10_MARK, A11_MARK, A12_MARK, A13_MARK, + A14_MARK, A15_MARK, A16_MARK, A17_MARK, + A18_MARK, A19_MARK, A20_MARK, A21_MARK, + A22_MARK, A23_MARK, A24_MARK, A25_MARK, + A26_MARK, + + D0_NAF0_MARK, D1_NAF1_MARK, D2_NAF2_MARK, /* share with FLCTL */ + D3_NAF3_MARK, D4_NAF4_MARK, D5_NAF5_MARK, /* share with FLCTL */ + D6_NAF6_MARK, D7_NAF7_MARK, D8_NAF8_MARK, /* share with FLCTL */ + D9_NAF9_MARK, D10_NAF10_MARK, D11_NAF11_MARK, /* share with FLCTL */ + D12_NAF12_MARK, D13_NAF13_MARK, D14_NAF14_MARK, /* share with FLCTL */ + D15_NAF15_MARK, /* share with FLCTL */ + D16_MARK, D17_MARK, D18_MARK, D19_MARK, + D20_MARK, D21_MARK, D22_MARK, D23_MARK, + D24_MARK, D25_MARK, D26_MARK, D27_MARK, + D28_MARK, D29_MARK, D30_MARK, D31_MARK, + + WE0_FWE_MARK, /* share with FLCTL */ + WE1_MARK, + WE2_ICIORD_MARK, /* share with PCMCIA */ + WE3_ICIOWR_MARK, /* share with PCMCIA */ + CKO_MARK, BS_MARK, RDWR_MARK, + RD_FSC_MARK, /* share with FLCTL */ + WAIT_PORT177_MARK, /* WAIT Port 90/177 */ + WAIT_PORT90_MARK, + + FCE0_MARK, FCE1_MARK, FRB_MARK, /* FLCTL */ + + /* IRDA */ + IRDA_FIRSEL_MARK, IRDA_IN_MARK, IRDA_OUT_MARK, + + /* ATAPI */ + IDE_D0_MARK, IDE_D1_MARK, IDE_D2_MARK, IDE_D3_MARK, + IDE_D4_MARK, IDE_D5_MARK, IDE_D6_MARK, IDE_D7_MARK, + IDE_D8_MARK, IDE_D9_MARK, IDE_D10_MARK, IDE_D11_MARK, + IDE_D12_MARK, IDE_D13_MARK, IDE_D14_MARK, IDE_D15_MARK, + IDE_A0_MARK, IDE_A1_MARK, IDE_A2_MARK, IDE_CS0_MARK, + IDE_CS1_MARK, IDE_IOWR_MARK, IDE_IORD_MARK, IDE_IORDY_MARK, + IDE_INT_MARK, IDE_RST_MARK, IDE_DIRECTION_MARK, + IDE_EXBUF_ENB_MARK, IDE_IODACK_MARK, IDE_IODREQ_MARK, + + /* RMII */ + RMII_CRS_DV_MARK, RMII_RX_ER_MARK, RMII_RXD0_MARK, + RMII_RXD1_MARK, RMII_TX_EN_MARK, RMII_TXD0_MARK, + RMII_MDC_MARK, RMII_TXD1_MARK, RMII_MDIO_MARK, + RMII_REF50CK_MARK, /* for RMII */ + RMII_REF125CK_MARK, /* for GMII */ + + /* GEther */ + ET_TX_CLK_MARK, ET_TX_EN_MARK, ET_ETXD0_MARK, ET_ETXD1_MARK, + ET_ETXD2_MARK, ET_ETXD3_MARK, + ET_ETXD4_MARK, ET_ETXD5_MARK, /* for GEther */ + ET_ETXD6_MARK, ET_ETXD7_MARK, /* for GEther */ + ET_COL_MARK, ET_TX_ER_MARK, ET_RX_CLK_MARK, ET_RX_DV_MARK, + ET_ERXD0_MARK, ET_ERXD1_MARK, ET_ERXD2_MARK, ET_ERXD3_MARK, + ET_ERXD4_MARK, ET_ERXD5_MARK, /* for GEther */ + ET_ERXD6_MARK, ET_ERXD7_MARK, /* for GEther */ + ET_RX_ER_MARK, ET_CRS_MARK, ET_MDC_MARK, ET_MDIO_MARK, + ET_LINK_MARK, ET_PHY_INT_MARK, ET_WOL_MARK, ET_GTX_CLK_MARK, + + /* DMA0 */ + DREQ0_MARK, DACK0_MARK, + + /* DMA1 */ + DREQ1_MARK, DACK1_MARK, + + /* SYSC */ + RESETOUTS_MARK, RESETP_PULLUP_MARK, RESETP_PLAIN_MARK, + + /* IRREM */ + IROUT_MARK, + + /* SDENC */ + SDENC_CPG_MARK, SDENC_DV_CLKI_MARK, + + /* DEBUG */ + EDEBGREQ_PULLUP_MARK, /* for JTAG */ + EDEBGREQ_PULLDOWN_MARK, + + TRACEAUD_FROM_VIO_MARK, /* for TRACE/AUD */ + TRACEAUD_FROM_LCDC0_MARK, + TRACEAUD_FROM_MEMC_MARK, + + PINMUX_MARK_END, +}; + +static unsigned short pinmux_data[] = { + /* specify valid pin states for each pin in GPIO mode */ + + /* I/O and Pull U/D */ + PORT_DATA_IO_PD(0), PORT_DATA_IO_PD(1), + PORT_DATA_IO_PD(2), PORT_DATA_IO_PD(3), + PORT_DATA_IO_PD(4), PORT_DATA_IO_PD(5), + PORT_DATA_IO_PD(6), PORT_DATA_IO(7), + PORT_DATA_IO(8), PORT_DATA_IO(9), + + PORT_DATA_IO_PD(10), PORT_DATA_IO_PD(11), + PORT_DATA_IO_PD(12), PORT_DATA_IO_PU_PD(13), + PORT_DATA_IO_PD(14), PORT_DATA_IO_PD(15), + PORT_DATA_IO_PD(16), PORT_DATA_IO_PD(17), + PORT_DATA_IO(18), PORT_DATA_IO_PU(19), + + PORT_DATA_IO_PU_PD(20), PORT_DATA_IO_PD(21), + PORT_DATA_IO_PU_PD(22), PORT_DATA_IO(23), + PORT_DATA_IO_PU(24), PORT_DATA_IO_PU(25), + PORT_DATA_IO_PU(26), PORT_DATA_IO_PU(27), + PORT_DATA_IO_PU(28), PORT_DATA_IO_PU(29), + + PORT_DATA_IO_PU(30), PORT_DATA_IO_PD(31), + PORT_DATA_IO_PD(32), PORT_DATA_IO_PD(33), + PORT_DATA_IO_PD(34), PORT_DATA_IO_PU(35), + PORT_DATA_IO_PU(36), PORT_DATA_IO_PD(37), + PORT_DATA_IO_PU(38), PORT_DATA_IO_PD(39), + + PORT_DATA_IO_PU_PD(40), PORT_DATA_IO_PD(41), + PORT_DATA_IO_PD(42), PORT_DATA_IO_PU_PD(43), + PORT_DATA_IO_PU_PD(44), PORT_DATA_IO_PU_PD(45), + PORT_DATA_IO_PU_PD(46), PORT_DATA_IO_PU_PD(47), + PORT_DATA_IO_PU_PD(48), PORT_DATA_IO_PU_PD(49), + + PORT_DATA_IO_PU_PD(50), PORT_DATA_IO_PD(51), + PORT_DATA_IO_PD(52), PORT_DATA_IO_PD(53), + PORT_DATA_IO_PD(54), PORT_DATA_IO_PU_PD(55), + PORT_DATA_IO_PU_PD(56), PORT_DATA_IO_PU_PD(57), + PORT_DATA_IO_PU_PD(58), PORT_DATA_IO_PU_PD(59), + + PORT_DATA_IO_PU_PD(60), PORT_DATA_IO_PD(61), + PORT_DATA_IO_PD(62), PORT_DATA_IO_PD(63), + PORT_DATA_IO_PD(64), PORT_DATA_IO_PD(65), + PORT_DATA_IO_PU_PD(66), PORT_DATA_IO_PU_PD(67), + PORT_DATA_IO_PU_PD(68), PORT_DATA_IO_PU_PD(69), + + PORT_DATA_IO_PU_PD(70), PORT_DATA_IO_PU_PD(71), + PORT_DATA_IO_PU_PD(72), PORT_DATA_IO_PU_PD(73), + PORT_DATA_IO_PU_PD(74), PORT_DATA_IO_PU_PD(75), + PORT_DATA_IO_PU_PD(76), PORT_DATA_IO_PU_PD(77), + PORT_DATA_IO_PU_PD(78), PORT_DATA_IO_PU_PD(79), + + PORT_DATA_IO_PU_PD(80), PORT_DATA_IO_PU_PD(81), + PORT_DATA_IO(82), PORT_DATA_IO_PU_PD(83), + PORT_DATA_IO(84), PORT_DATA_IO_PD(85), + PORT_DATA_IO_PD(86), PORT_DATA_IO_PD(87), + PORT_DATA_IO_PD(88), PORT_DATA_IO_PD(89), + + PORT_DATA_IO_PD(90), PORT_DATA_IO_PU_PD(91), + PORT_DATA_IO_PU_PD(92), PORT_DATA_IO_PU_PD(93), + PORT_DATA_IO_PU_PD(94), PORT_DATA_IO_PU_PD(95), + PORT_DATA_IO_PU_PD(96), PORT_DATA_IO_PU_PD(97), + PORT_DATA_IO_PU_PD(98), PORT_DATA_IO_PU_PD(99), + + PORT_DATA_IO_PU_PD(100), PORT_DATA_IO(101), + PORT_DATA_IO_PU(102), PORT_DATA_IO_PU_PD(103), + PORT_DATA_IO_PU(104), PORT_DATA_IO_PU(105), + PORT_DATA_IO_PU_PD(106), PORT_DATA_IO(107), + PORT_DATA_IO(108), PORT_DATA_IO(109), + + PORT_DATA_IO(110), PORT_DATA_IO(111), + PORT_DATA_IO(112), PORT_DATA_IO(113), + PORT_DATA_IO_PU_PD(114), PORT_DATA_IO(115), + PORT_DATA_IO_PD(116), PORT_DATA_IO_PD(117), + PORT_DATA_IO_PD(118), PORT_DATA_IO_PD(119), + + PORT_DATA_IO_PD(120), PORT_DATA_IO_PD(121), + PORT_DATA_IO_PD(122), PORT_DATA_IO_PD(123), + PORT_DATA_IO_PD(124), PORT_DATA_IO(125), + PORT_DATA_IO(126), PORT_DATA_IO(127), + PORT_DATA_IO(128), PORT_DATA_IO(129), + + PORT_DATA_IO(130), PORT_DATA_IO(131), + PORT_DATA_IO(132), PORT_DATA_IO(133), + PORT_DATA_IO(134), PORT_DATA_IO(135), + PORT_DATA_IO(136), PORT_DATA_IO(137), + PORT_DATA_IO(138), PORT_DATA_IO(139), + + PORT_DATA_IO(140), PORT_DATA_IO(141), + PORT_DATA_IO_PU(142), PORT_DATA_IO_PU(143), + PORT_DATA_IO_PU(144), PORT_DATA_IO_PU(145), + PORT_DATA_IO_PU(146), PORT_DATA_IO_PU(147), + PORT_DATA_IO_PU(148), PORT_DATA_IO_PU(149), + + PORT_DATA_IO_PU(150), PORT_DATA_IO_PU(151), + PORT_DATA_IO_PU(152), PORT_DATA_IO_PU(153), + PORT_DATA_IO_PU(154), PORT_DATA_IO_PU(155), + PORT_DATA_IO_PU(156), PORT_DATA_IO_PU(157), + PORT_DATA_IO_PD(158), PORT_DATA_IO_PD(159), + + PORT_DATA_IO_PU_PD(160), PORT_DATA_IO_PD(161), + PORT_DATA_IO_PD(162), PORT_DATA_IO_PD(163), + PORT_DATA_IO_PD(164), PORT_DATA_IO_PD(165), + PORT_DATA_IO_PU(166), PORT_DATA_IO_PU(167), + PORT_DATA_IO_PU(168), PORT_DATA_IO_PU(169), + + PORT_DATA_IO_PU(170), PORT_DATA_IO_PU(171), + PORT_DATA_IO_PD(172), PORT_DATA_IO_PD(173), + PORT_DATA_IO_PD(174), PORT_DATA_IO_PD(175), + PORT_DATA_IO_PU(176), PORT_DATA_IO_PU_PD(177), + PORT_DATA_IO_PU(178), PORT_DATA_IO_PD(179), + + PORT_DATA_IO_PD(180), PORT_DATA_IO_PU(181), + PORT_DATA_IO_PU(182), PORT_DATA_IO(183), + PORT_DATA_IO_PD(184), PORT_DATA_IO_PD(185), + PORT_DATA_IO_PD(186), PORT_DATA_IO_PD(187), + PORT_DATA_IO_PD(188), PORT_DATA_IO_PD(189), + + PORT_DATA_IO_PD(190), PORT_DATA_IO_PD(191), + PORT_DATA_IO_PD(192), PORT_DATA_IO_PU_PD(193), + PORT_DATA_IO_PU_PD(194), PORT_DATA_IO_PD(195), + PORT_DATA_IO_PU_PD(196), PORT_DATA_IO_PD(197), + PORT_DATA_IO_PU_PD(198), PORT_DATA_IO_PU_PD(199), + + PORT_DATA_IO_PU_PD(200), PORT_DATA_IO_PU(201), + PORT_DATA_IO_PU_PD(202), PORT_DATA_IO(203), + PORT_DATA_IO_PU_PD(204), PORT_DATA_IO_PU_PD(205), + PORT_DATA_IO_PU_PD(206), PORT_DATA_IO_PU_PD(207), + PORT_DATA_IO_PU_PD(208), PORT_DATA_IO_PD(209), + + PORT_DATA_IO_PD(210), PORT_DATA_IO_PD(211), + + /* Port0 */ + PINMUX_DATA(DBGMDT2_MARK, PORT0_FN1), + PINMUX_DATA(FSIAISLD_PORT0_MARK, PORT0_FN2, MSEL5CR_3_0), + PINMUX_DATA(FSIAOSLD1_MARK, PORT0_FN3), + PINMUX_DATA(LCD0_D22_PORT0_MARK, PORT0_FN4, MSEL5CR_6_0), + PINMUX_DATA(SCIFA7_RXD_MARK, PORT0_FN6), + PINMUX_DATA(LCD1_D4_MARK, PORT0_FN7), + PINMUX_DATA(IRQ5_PORT0_MARK, PORT0_FN0, MSEL1CR_5_0), + + /* Port1 */ + PINMUX_DATA(DBGMDT1_MARK, PORT1_FN1), + PINMUX_DATA(FMSISLD_PORT1_MARK, PORT1_FN2, MSEL5CR_5_0), + PINMUX_DATA(FSIAOSLD2_MARK, PORT1_FN3), + PINMUX_DATA(LCD0_D23_PORT1_MARK, PORT1_FN4, MSEL5CR_6_0), + PINMUX_DATA(SCIFA7_TXD_MARK, PORT1_FN6), + PINMUX_DATA(LCD1_D3_MARK, PORT1_FN7), + PINMUX_DATA(IRQ5_PORT1_MARK, PORT1_FN0, MSEL1CR_5_1), + + /* Port2 */ + PINMUX_DATA(DBGMDT0_MARK, PORT2_FN1), + PINMUX_DATA(SCIFB_SCK_PORT2_MARK, PORT2_FN2, MSEL5CR_17_1), + PINMUX_DATA(LCD0_D21_PORT2_MARK, PORT2_FN4, MSEL5CR_6_0), + PINMUX_DATA(LCD1_D2_MARK, PORT2_FN7), + PINMUX_DATA(IRQ0_PORT2_MARK, PORT2_FN0, MSEL1CR_0_1), + + /* Port3 */ + PINMUX_DATA(DBGMD21_MARK, PORT3_FN1), + PINMUX_DATA(SCIFB_RXD_PORT3_MARK, PORT3_FN2, MSEL5CR_17_1), + PINMUX_DATA(LCD0_D20_PORT3_MARK, PORT3_FN4, MSEL5CR_6_0), + PINMUX_DATA(LCD1_D1_MARK, PORT3_FN7), + + /* Port4 */ + PINMUX_DATA(DBGMD20_MARK, PORT4_FN1), + PINMUX_DATA(SCIFB_TXD_PORT4_MARK, PORT4_FN2, MSEL5CR_17_1), + PINMUX_DATA(LCD0_D19_PORT4_MARK, PORT4_FN4, MSEL5CR_6_0), + PINMUX_DATA(LCD1_D0_MARK, PORT4_FN7), + + /* Port5 */ + PINMUX_DATA(DBGMD11_MARK, PORT5_FN1), + PINMUX_DATA(BBIF2_TXD2_PORT5_MARK, PORT5_FN2, MSEL5CR_0_0), + PINMUX_DATA(FSIAISLD_PORT5_MARK, PORT5_FN4, MSEL5CR_3_1), + PINMUX_DATA(RSPI_SSL0_A_MARK, PORT5_FN6), + PINMUX_DATA(LCD1_VCPWC_MARK, PORT5_FN7), + + /* Port6 */ + PINMUX_DATA(DBGMD10_MARK, PORT6_FN1), + PINMUX_DATA(BBIF2_TSYNC2_PORT6_MARK, PORT6_FN2, MSEL5CR_0_0), + PINMUX_DATA(FMSISLD_PORT6_MARK, PORT6_FN4, MSEL5CR_5_1), + PINMUX_DATA(RSPI_SSL1_A_MARK, PORT6_FN6), + PINMUX_DATA(LCD1_VEPWC_MARK, PORT6_FN7), + + /* Port7 */ + PINMUX_DATA(FSIAOLR_MARK, PORT7_FN1), + + /* Port8 */ + PINMUX_DATA(FSIAOBT_MARK, PORT8_FN1), + + /* Port9 */ + PINMUX_DATA(FSIAOSLD_MARK, PORT9_FN1), + PINMUX_DATA(FSIASPDIF_PORT9_MARK, PORT9_FN2, MSEL5CR_4_0), + + /* Port10 */ + PINMUX_DATA(FSIAOMC_MARK, PORT10_FN1), + PINMUX_DATA(SCIFA5_RXD_PORT10_MARK, PORT10_FN3, MSEL5CR_14_0, + MSEL5CR_15_0), + PINMUX_DATA(IRQ3_PORT10_MARK, PORT10_FN0, MSEL1CR_3_0), + + /* Port11 */ + PINMUX_DATA(FSIACK_MARK, PORT11_FN1), + PINMUX_DATA(IRQ2_PORT11_MARK, PORT11_FN0, MSEL1CR_2_0), + + /* Port12 */ + PINMUX_DATA(FSIAILR_MARK, PORT12_FN1), + PINMUX_DATA(SCIFA4_RXD_PORT12_MARK, PORT12_FN2, MSEL5CR_12_0, + MSEL5CR_11_0), + PINMUX_DATA(LCD1_RS_MARK, PORT12_FN6), + PINMUX_DATA(LCD1_DISP_MARK, PORT12_FN7), + PINMUX_DATA(IRQ2_PORT12_MARK, PORT12_FN0, MSEL1CR_2_1), + + /* Port13 */ + PINMUX_DATA(FSIAIBT_MARK, PORT13_FN1), + PINMUX_DATA(SCIFA4_TXD_PORT13_MARK, PORT13_FN2, MSEL5CR_12_0, + MSEL5CR_11_0), + PINMUX_DATA(LCD1_RD_MARK, PORT13_FN7), + PINMUX_DATA(IRQ0_PORT13_MARK, PORT13_FN0, MSEL1CR_0_0), + + /* Port14 */ + PINMUX_DATA(FMSOILR_MARK, PORT14_FN1), + PINMUX_DATA(FMSIILR_MARK, PORT14_FN2), + PINMUX_DATA(VIO_CKO1_MARK, PORT14_FN3), + PINMUX_DATA(LCD1_D23_MARK, PORT14_FN7), + PINMUX_DATA(IRQ3_PORT14_MARK, PORT14_FN0, MSEL1CR_3_1), + + /* Port15 */ + PINMUX_DATA(FMSOIBT_MARK, PORT15_FN1), + PINMUX_DATA(FMSIIBT_MARK, PORT15_FN2), + PINMUX_DATA(VIO_CKO2_MARK, PORT15_FN3), + PINMUX_DATA(LCD1_D22_MARK, PORT15_FN7), + PINMUX_DATA(IRQ4_PORT15_MARK, PORT15_FN0, MSEL1CR_4_0), + + /* Port16 */ + PINMUX_DATA(FMSOOLR_MARK, PORT16_FN1), + PINMUX_DATA(FMSIOLR_MARK, PORT16_FN2), + + /* Port17 */ + PINMUX_DATA(FMSOOBT_MARK, PORT17_FN1), + PINMUX_DATA(FMSIOBT_MARK, PORT17_FN2), + + /* Port18 */ + PINMUX_DATA(FMSOSLD_MARK, PORT18_FN1), + PINMUX_DATA(FSIASPDIF_PORT18_MARK, PORT18_FN2, MSEL5CR_4_1), + + /* Port19 */ + PINMUX_DATA(FMSICK_MARK, PORT19_FN1), + PINMUX_DATA(CS5A_PORT19_MARK, PORT19_FN7, MSEL5CR_2_1), + PINMUX_DATA(IRQ10_MARK, PORT19_FN0), + + /* Port20 */ + PINMUX_DATA(FMSOCK_MARK, PORT20_FN1), + PINMUX_DATA(SCIFA5_TXD_PORT20_MARK, PORT20_FN3, MSEL5CR_15_0, + MSEL5CR_14_0), + PINMUX_DATA(IRQ1_MARK, PORT20_FN0), + + /* Port21 */ + PINMUX_DATA(SCIFA1_CTS_MARK, PORT21_FN1), + PINMUX_DATA(SCIFA4_SCK_PORT21_MARK, PORT21_FN2, MSEL5CR_10_0), + PINMUX_DATA(TPU0TO1_MARK, PORT21_FN4), + PINMUX_DATA(VIO1_FIELD_MARK, PORT21_FN5), + PINMUX_DATA(STP0_IPD5_MARK, PORT21_FN6), + PINMUX_DATA(LCD1_D10_MARK, PORT21_FN7), + + /* Port22 */ + PINMUX_DATA(SCIFA2_SCK_PORT22_MARK, PORT22_FN1, MSEL5CR_7_0), + PINMUX_DATA(SIM_D_PORT22_MARK, PORT22_FN4, MSEL5CR_21_0), + PINMUX_DATA(VIO0_D13_PORT22_MARK, PORT22_FN7, MSEL5CR_27_1), + + /* Port23 */ + PINMUX_DATA(SCIFA1_RTS_MARK, PORT23_FN1), + PINMUX_DATA(SCIFA5_SCK_PORT23_MARK, PORT23_FN3, MSEL5CR_13_0), + PINMUX_DATA(TPU0TO0_MARK, PORT23_FN4), + PINMUX_DATA(VIO_CKO_1_MARK, PORT23_FN5), + PINMUX_DATA(STP0_IPD2_MARK, PORT23_FN6), + PINMUX_DATA(LCD1_D7_MARK, PORT23_FN7), + + /* Port24 */ + PINMUX_DATA(VIO0_D15_PORT24_MARK, PORT24_FN1, MSEL5CR_27_0), + PINMUX_DATA(VIO1_D7_MARK, PORT24_FN5), + PINMUX_DATA(SCIFA6_SCK_MARK, PORT24_FN6), + PINMUX_DATA(SDHI2_CD_PORT24_MARK, PORT24_FN7, MSEL5CR_19_0), + + /* Port25 */ + PINMUX_DATA(VIO0_D14_PORT25_MARK, PORT25_FN1, MSEL5CR_27_0), + PINMUX_DATA(VIO1_D6_MARK, PORT25_FN5), + PINMUX_DATA(SCIFA6_RXD_MARK, PORT25_FN6), + PINMUX_DATA(SDHI2_WP_PORT25_MARK, PORT25_FN7, MSEL5CR_19_0), + + /* Port26 */ + PINMUX_DATA(VIO0_D13_PORT26_MARK, PORT26_FN1, MSEL5CR_27_0), + PINMUX_DATA(VIO1_D5_MARK, PORT26_FN5), + PINMUX_DATA(SCIFA6_TXD_MARK, PORT26_FN6), + + /* Port27 - Port39 Function */ + PINMUX_DATA(VIO0_D7_MARK, PORT27_FN1), + PINMUX_DATA(VIO0_D6_MARK, PORT28_FN1), + PINMUX_DATA(VIO0_D5_MARK, PORT29_FN1), + PINMUX_DATA(VIO0_D4_MARK, PORT30_FN1), + PINMUX_DATA(VIO0_D3_MARK, PORT31_FN1), + PINMUX_DATA(VIO0_D2_MARK, PORT32_FN1), + PINMUX_DATA(VIO0_D1_MARK, PORT33_FN1), + PINMUX_DATA(VIO0_D0_MARK, PORT34_FN1), + PINMUX_DATA(VIO0_CLK_MARK, PORT35_FN1), + PINMUX_DATA(VIO_CKO_MARK, PORT36_FN1), + PINMUX_DATA(VIO0_HD_MARK, PORT37_FN1), + PINMUX_DATA(VIO0_FIELD_MARK, PORT38_FN1), + PINMUX_DATA(VIO0_VD_MARK, PORT39_FN1), + + /* Port38 IRQ */ + PINMUX_DATA(IRQ25_MARK, PORT38_FN0), + + /* Port40 */ + PINMUX_DATA(LCD0_D18_PORT40_MARK, PORT40_FN4, MSEL5CR_6_0), + PINMUX_DATA(RSPI_CK_A_MARK, PORT40_FN6), + PINMUX_DATA(LCD1_LCLK_MARK, PORT40_FN7), + + /* Port41 */ + PINMUX_DATA(LCD0_D17_MARK, PORT41_FN1), + PINMUX_DATA(MSIOF2_SS1_MARK, PORT41_FN2), + PINMUX_DATA(IRQ31_PORT41_MARK, PORT41_FN0, MSEL1CR_31_1), + + /* Port42 */ + PINMUX_DATA(LCD0_D16_MARK, PORT42_FN1), + PINMUX_DATA(MSIOF2_MCK1_MARK, PORT42_FN2), + PINMUX_DATA(IRQ12_PORT42_MARK, PORT42_FN0, MSEL1CR_12_1), + + /* Port43 */ + PINMUX_DATA(LCD0_D15_MARK, PORT43_FN1), + PINMUX_DATA(MSIOF2_MCK0_MARK, PORT43_FN2), + PINMUX_DATA(KEYIN0_PORT43_MARK, PORT43_FN3, MSEL4CR_18_0), + PINMUX_DATA(DV_D15_MARK, PORT43_FN6), + + /* Port44 */ + PINMUX_DATA(LCD0_D14_MARK, PORT44_FN1), + PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT44_FN2), + PINMUX_DATA(KEYIN1_PORT44_MARK, PORT44_FN3, MSEL4CR_18_0), + PINMUX_DATA(DV_D14_MARK, PORT44_FN6), + + /* Port45 */ + PINMUX_DATA(LCD0_D13_MARK, PORT45_FN1), + PINMUX_DATA(MSIOF2_RSCK_MARK, PORT45_FN2), + PINMUX_DATA(KEYIN2_PORT45_MARK, PORT45_FN3, MSEL4CR_18_0), + PINMUX_DATA(DV_D13_MARK, PORT45_FN6), + + /* Port46 */ + PINMUX_DATA(LCD0_D12_MARK, PORT46_FN1), + PINMUX_DATA(KEYIN3_PORT46_MARK, PORT46_FN3, MSEL4CR_18_0), + PINMUX_DATA(DV_D12_MARK, PORT46_FN6), + + /* Port47 */ + PINMUX_DATA(LCD0_D11_MARK, PORT47_FN1), + PINMUX_DATA(KEYIN4_MARK, PORT47_FN3), + PINMUX_DATA(DV_D11_MARK, PORT47_FN6), + + /* Port48 */ + PINMUX_DATA(LCD0_D10_MARK, PORT48_FN1), + PINMUX_DATA(KEYIN5_MARK, PORT48_FN3), + PINMUX_DATA(DV_D10_MARK, PORT48_FN6), + + /* Port49 */ + PINMUX_DATA(LCD0_D9_MARK, PORT49_FN1), + PINMUX_DATA(KEYIN6_MARK, PORT49_FN3), + PINMUX_DATA(DV_D9_MARK, PORT49_FN6), + PINMUX_DATA(IRQ30_PORT49_MARK, PORT49_FN0, MSEL1CR_30_1), + + /* Port50 */ + PINMUX_DATA(LCD0_D8_MARK, PORT50_FN1), + PINMUX_DATA(KEYIN7_MARK, PORT50_FN3), + PINMUX_DATA(DV_D8_MARK, PORT50_FN6), + PINMUX_DATA(IRQ29_PORT50_MARK, PORT50_FN0, MSEL1CR_29_1), + + /* Port51 */ + PINMUX_DATA(LCD0_D7_MARK, PORT51_FN1), + PINMUX_DATA(KEYOUT0_MARK, PORT51_FN3), + PINMUX_DATA(DV_D7_MARK, PORT51_FN6), + + /* Port52 */ + PINMUX_DATA(LCD0_D6_MARK, PORT52_FN1), + PINMUX_DATA(KEYOUT1_MARK, PORT52_FN3), + PINMUX_DATA(DV_D6_MARK, PORT52_FN6), + + /* Port53 */ + PINMUX_DATA(LCD0_D5_MARK, PORT53_FN1), + PINMUX_DATA(KEYOUT2_MARK, PORT53_FN3), + PINMUX_DATA(DV_D5_MARK, PORT53_FN6), + + /* Port54 */ + PINMUX_DATA(LCD0_D4_MARK, PORT54_FN1), + PINMUX_DATA(KEYOUT3_MARK, PORT54_FN3), + PINMUX_DATA(DV_D4_MARK, PORT54_FN6), + + /* Port55 */ + PINMUX_DATA(LCD0_D3_MARK, PORT55_FN1), + PINMUX_DATA(KEYOUT4_MARK, PORT55_FN3), + PINMUX_DATA(KEYIN3_PORT55_MARK, PORT55_FN4, MSEL4CR_18_1), + PINMUX_DATA(DV_D3_MARK, PORT55_FN6), + + /* Port56 */ + PINMUX_DATA(LCD0_D2_MARK, PORT56_FN1), + PINMUX_DATA(KEYOUT5_MARK, PORT56_FN3), + PINMUX_DATA(KEYIN2_PORT56_MARK, PORT56_FN4, MSEL4CR_18_1), + PINMUX_DATA(DV_D2_MARK, PORT56_FN6), + PINMUX_DATA(IRQ28_PORT56_MARK, PORT56_FN0, MSEL1CR_28_1), + + /* Port57 */ + PINMUX_DATA(LCD0_D1_MARK, PORT57_FN1), + PINMUX_DATA(KEYOUT6_MARK, PORT57_FN3), + PINMUX_DATA(KEYIN1_PORT57_MARK, PORT57_FN4, MSEL4CR_18_1), + PINMUX_DATA(DV_D1_MARK, PORT57_FN6), + PINMUX_DATA(IRQ27_PORT57_MARK, PORT57_FN0, MSEL1CR_27_1), + + /* Port58 */ + PINMUX_DATA(LCD0_D0_MARK, PORT58_FN1), + PINMUX_DATA(KEYOUT7_MARK, PORT58_FN3), + PINMUX_DATA(KEYIN0_PORT58_MARK, PORT58_FN4, MSEL4CR_18_1), + PINMUX_DATA(DV_D0_MARK, PORT58_FN6), + PINMUX_DATA(IRQ26_PORT58_MARK, PORT58_FN0, MSEL1CR_26_1), + + /* Port59 */ + PINMUX_DATA(LCD0_VCPWC_MARK, PORT59_FN1), + PINMUX_DATA(BBIF2_TSCK2_PORT59_MARK, PORT59_FN2, MSEL5CR_0_0), + PINMUX_DATA(RSPI_MOSI_A_MARK, PORT59_FN6), + + /* Port60 */ + PINMUX_DATA(LCD0_VEPWC_MARK, PORT60_FN1), + PINMUX_DATA(BBIF2_RXD2_PORT60_MARK, PORT60_FN2, MSEL5CR_0_0), + PINMUX_DATA(RSPI_MISO_A_MARK, PORT60_FN6), + + /* Port61 */ + PINMUX_DATA(LCD0_DON_MARK, PORT61_FN1), + PINMUX_DATA(MSIOF2_TXD_MARK, PORT61_FN2), + + /* Port62 */ + PINMUX_DATA(LCD0_DCK_MARK, PORT62_FN1), + PINMUX_DATA(LCD0_WR_MARK, PORT62_FN4), + PINMUX_DATA(DV_CLK_MARK, PORT62_FN6), + PINMUX_DATA(IRQ15_PORT62_MARK, PORT62_FN0, MSEL1CR_15_1), + + /* Port63 */ + PINMUX_DATA(LCD0_VSYN_MARK, PORT63_FN1), + PINMUX_DATA(DV_VSYNC_MARK, PORT63_FN6), + PINMUX_DATA(IRQ14_PORT63_MARK, PORT63_FN0, MSEL1CR_14_1), + + /* Port64 */ + PINMUX_DATA(LCD0_HSYN_MARK, PORT64_FN1), + PINMUX_DATA(LCD0_CS_MARK, PORT64_FN4), + PINMUX_DATA(DV_HSYNC_MARK, PORT64_FN6), + PINMUX_DATA(IRQ13_PORT64_MARK, PORT64_FN0, MSEL1CR_13_1), + + /* Port65 */ + PINMUX_DATA(LCD0_DISP_MARK, PORT65_FN1), + PINMUX_DATA(MSIOF2_TSCK_MARK, PORT65_FN2), + PINMUX_DATA(LCD0_RS_MARK, PORT65_FN4), + + /* Port66 */ + PINMUX_DATA(MEMC_INT_MARK, PORT66_FN1), + PINMUX_DATA(TPU0TO2_PORT66_MARK, PORT66_FN3, MSEL5CR_25_0), + PINMUX_DATA(MMC0_CLK_PORT66_MARK, PORT66_FN4, MSEL4CR_15_0), + PINMUX_DATA(SDHI1_CLK_MARK, PORT66_FN6), + + /* Port67 - Port73 Function1 */ + PINMUX_DATA(MEMC_CS0_MARK, PORT67_FN1), + PINMUX_DATA(MEMC_AD8_MARK, PORT68_FN1), + PINMUX_DATA(MEMC_AD9_MARK, PORT69_FN1), + PINMUX_DATA(MEMC_AD10_MARK, PORT70_FN1), + PINMUX_DATA(MEMC_AD11_MARK, PORT71_FN1), + PINMUX_DATA(MEMC_AD12_MARK, PORT72_FN1), + PINMUX_DATA(MEMC_AD13_MARK, PORT73_FN1), + + /* Port67 - Port73 Function2 */ + PINMUX_DATA(MSIOF1_SS1_PORT67_MARK, PORT67_FN2, MSEL4CR_10_1), + PINMUX_DATA(MSIOF1_RSCK_MARK, PORT68_FN2), + PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT69_FN2), + PINMUX_DATA(MSIOF1_MCK0_MARK, PORT70_FN2), + PINMUX_DATA(MSIOF1_MCK1_MARK, PORT71_FN2), + PINMUX_DATA(MSIOF1_TSCK_PORT72_MARK, PORT72_FN2, MSEL4CR_10_1), + PINMUX_DATA(MSIOF1_TSYNC_PORT73_MARK, PORT73_FN2, MSEL4CR_10_1), + + /* Port67 - Port73 Function4 */ + PINMUX_DATA(MMC0_CMD_PORT67_MARK, PORT67_FN4, MSEL4CR_15_0), + PINMUX_DATA(MMC0_D0_PORT68_MARK, PORT68_FN4, MSEL4CR_15_0), + PINMUX_DATA(MMC0_D1_PORT69_MARK, PORT69_FN4, MSEL4CR_15_0), + PINMUX_DATA(MMC0_D2_PORT70_MARK, PORT70_FN4, MSEL4CR_15_0), + PINMUX_DATA(MMC0_D3_PORT71_MARK, PORT71_FN4, MSEL4CR_15_0), + PINMUX_DATA(MMC0_D4_PORT72_MARK, PORT72_FN4, MSEL4CR_15_0), + PINMUX_DATA(MMC0_D5_PORT73_MARK, PORT73_FN4, MSEL4CR_15_0), + + /* Port67 - Port73 Function6 */ + PINMUX_DATA(SDHI1_CMD_MARK, PORT67_FN6), + PINMUX_DATA(SDHI1_D0_MARK, PORT68_FN6), + PINMUX_DATA(SDHI1_D1_MARK, PORT69_FN6), + PINMUX_DATA(SDHI1_D2_MARK, PORT70_FN6), + PINMUX_DATA(SDHI1_D3_MARK, PORT71_FN6), + PINMUX_DATA(SDHI1_CD_MARK, PORT72_FN6), + PINMUX_DATA(SDHI1_WP_MARK, PORT73_FN6), + + /* Port67 - Port71 IRQ */ + PINMUX_DATA(IRQ20_MARK, PORT67_FN0), + PINMUX_DATA(IRQ16_PORT68_MARK, PORT68_FN0, MSEL1CR_16_0), + PINMUX_DATA(IRQ17_MARK, PORT69_FN0), + PINMUX_DATA(IRQ18_MARK, PORT70_FN0), + PINMUX_DATA(IRQ19_MARK, PORT71_FN0), + + /* Port74 */ + PINMUX_DATA(MEMC_AD14_MARK, PORT74_FN1), + PINMUX_DATA(MSIOF1_TXD_PORT74_MARK, PORT74_FN2, MSEL4CR_10_1), + PINMUX_DATA(MMC0_D6_PORT74_MARK, PORT74_FN4, MSEL4CR_15_0), + PINMUX_DATA(STP1_IPD7_MARK, PORT74_FN6), + PINMUX_DATA(LCD1_D21_MARK, PORT74_FN7), + + /* Port75 */ + PINMUX_DATA(MEMC_AD15_MARK, PORT75_FN1), + PINMUX_DATA(MSIOF1_RXD_PORT75_MARK, PORT75_FN2, MSEL4CR_10_1), + PINMUX_DATA(MMC0_D7_PORT75_MARK, PORT75_FN4, MSEL4CR_15_0), + PINMUX_DATA(STP1_IPD6_MARK, PORT75_FN6), + PINMUX_DATA(LCD1_D20_MARK, PORT75_FN7), + + /* Port76 - Port80 Function */ + PINMUX_DATA(SDHI0_CMD_MARK, PORT76_FN1), + PINMUX_DATA(SDHI0_D0_MARK, PORT77_FN1), + PINMUX_DATA(SDHI0_D1_MARK, PORT78_FN1), + PINMUX_DATA(SDHI0_D2_MARK, PORT79_FN1), + PINMUX_DATA(SDHI0_D3_MARK, PORT80_FN1), + + /* Port81 */ + PINMUX_DATA(SDHI0_CD_MARK, PORT81_FN1), + PINMUX_DATA(IRQ26_PORT81_MARK, PORT81_FN0, MSEL1CR_26_0), + + /* Port82 - Port88 Function */ + PINMUX_DATA(SDHI0_CLK_MARK, PORT82_FN1), + PINMUX_DATA(SDHI0_WP_MARK, PORT83_FN1), + PINMUX_DATA(RESETOUTS_MARK, PORT84_FN1), + PINMUX_DATA(USB0_PPON_MARK, PORT85_FN1), + PINMUX_DATA(USB0_OCI_MARK, PORT86_FN1), + PINMUX_DATA(USB1_PPON_MARK, PORT87_FN1), + PINMUX_DATA(USB1_OCI_MARK, PORT88_FN1), + + /* Port89 */ + PINMUX_DATA(DREQ0_MARK, PORT89_FN1), + PINMUX_DATA(BBIF2_TSCK2_PORT89_MARK, PORT89_FN2, MSEL5CR_0_1), + PINMUX_DATA(RSPI_SSL3_A_MARK, PORT89_FN6), + + /* Port90 */ + PINMUX_DATA(DACK0_MARK, PORT90_FN1), + PINMUX_DATA(BBIF2_RXD2_PORT90_MARK, PORT90_FN2, MSEL5CR_0_1), + PINMUX_DATA(RSPI_SSL2_A_MARK, PORT90_FN6), + PINMUX_DATA(WAIT_PORT90_MARK, PORT90_FN7, MSEL5CR_2_1), + + /* Port91 */ + PINMUX_DATA(MEMC_AD0_MARK, PORT91_FN1), + PINMUX_DATA(BBIF1_RXD_MARK, PORT91_FN2), + PINMUX_DATA(SCIFA5_TXD_PORT91_MARK, PORT91_FN3, MSEL5CR_15_1, + MSEL5CR_14_0), + PINMUX_DATA(LCD1_D5_MARK, PORT91_FN7), + + /* Port92 */ + PINMUX_DATA(MEMC_AD1_MARK, PORT92_FN1), + PINMUX_DATA(BBIF1_TSYNC_MARK, PORT92_FN2), + PINMUX_DATA(SCIFA5_RXD_PORT92_MARK, PORT92_FN3, MSEL5CR_15_1, + MSEL5CR_14_0), + PINMUX_DATA(STP0_IPD1_MARK, PORT92_FN6), + PINMUX_DATA(LCD1_D6_MARK, PORT92_FN7), + + /* Port93 */ + PINMUX_DATA(MEMC_AD2_MARK, PORT93_FN1), + PINMUX_DATA(BBIF1_TSCK_MARK, PORT93_FN2), + PINMUX_DATA(SCIFA4_TXD_PORT93_MARK, PORT93_FN3, MSEL5CR_12_1, + MSEL5CR_11_0), + PINMUX_DATA(STP0_IPD3_MARK, PORT93_FN6), + PINMUX_DATA(LCD1_D8_MARK, PORT93_FN7), + + /* Port94 */ + PINMUX_DATA(MEMC_AD3_MARK, PORT94_FN1), + PINMUX_DATA(BBIF1_TXD_MARK, PORT94_FN2), + PINMUX_DATA(SCIFA4_RXD_PORT94_MARK, PORT94_FN3, MSEL5CR_12_1, + MSEL5CR_11_0), + PINMUX_DATA(STP0_IPD4_MARK, PORT94_FN6), + PINMUX_DATA(LCD1_D9_MARK, PORT94_FN7), + + /* Port95 */ + PINMUX_DATA(MEMC_CS1_MARK, PORT95_FN1, MSEL4CR_6_0), + PINMUX_DATA(MEMC_A1_MARK, PORT95_FN1, MSEL4CR_6_1), + + PINMUX_DATA(SCIFA2_CTS_MARK, PORT95_FN2), + PINMUX_DATA(SIM_RST_MARK, PORT95_FN4), + PINMUX_DATA(VIO0_D14_PORT95_MARK, PORT95_FN7, MSEL5CR_27_1), + PINMUX_DATA(IRQ22_MARK, PORT95_FN0), + + /* Port96 */ + PINMUX_DATA(MEMC_ADV_MARK, PORT96_FN1, MSEL4CR_6_0), + PINMUX_DATA(MEMC_DREQ0_MARK, PORT96_FN1, MSEL4CR_6_1), + + PINMUX_DATA(SCIFA2_RTS_MARK, PORT96_FN2), + PINMUX_DATA(SIM_CLK_MARK, PORT96_FN4), + PINMUX_DATA(VIO0_D15_PORT96_MARK, PORT96_FN7, MSEL5CR_27_1), + PINMUX_DATA(IRQ23_MARK, PORT96_FN0), + + /* Port97 */ + PINMUX_DATA(MEMC_AD4_MARK, PORT97_FN1), + PINMUX_DATA(BBIF1_RSCK_MARK, PORT97_FN2), + PINMUX_DATA(LCD1_CS_MARK, PORT97_FN6), + PINMUX_DATA(LCD1_HSYN_MARK, PORT97_FN7), + PINMUX_DATA(IRQ12_PORT97_MARK, PORT97_FN0, MSEL1CR_12_0), + + /* Port98 */ + PINMUX_DATA(MEMC_AD5_MARK, PORT98_FN1), + PINMUX_DATA(BBIF1_RSYNC_MARK, PORT98_FN2), + PINMUX_DATA(LCD1_VSYN_MARK, PORT98_FN7), + PINMUX_DATA(IRQ13_PORT98_MARK, PORT98_FN0, MSEL1CR_13_0), + + /* Port99 */ + PINMUX_DATA(MEMC_AD6_MARK, PORT99_FN1), + PINMUX_DATA(BBIF1_FLOW_MARK, PORT99_FN2), + PINMUX_DATA(LCD1_WR_MARK, PORT99_FN6), + PINMUX_DATA(LCD1_DCK_MARK, PORT99_FN7), + PINMUX_DATA(IRQ14_PORT99_MARK, PORT99_FN0, MSEL1CR_14_0), + + /* Port100 */ + PINMUX_DATA(MEMC_AD7_MARK, PORT100_FN1), + PINMUX_DATA(BBIF1_RX_FLOW_N_MARK, PORT100_FN2), + PINMUX_DATA(LCD1_DON_MARK, PORT100_FN7), + PINMUX_DATA(IRQ15_PORT100_MARK, PORT100_FN0, MSEL1CR_15_0), + + /* Port101 */ + PINMUX_DATA(FCE0_MARK, PORT101_FN1), + + /* Port102 */ + PINMUX_DATA(FRB_MARK, PORT102_FN1), + PINMUX_DATA(LCD0_LCLK_PORT102_MARK, PORT102_FN4, MSEL5CR_6_0), + + /* Port103 */ + PINMUX_DATA(CS5B_MARK, PORT103_FN1), + PINMUX_DATA(FCE1_MARK, PORT103_FN2), + PINMUX_DATA(MMC1_CLK_PORT103_MARK, PORT103_FN3, MSEL4CR_15_1), + + /* Port104 */ + PINMUX_DATA(CS6A_MARK, PORT104_FN1), + PINMUX_DATA(MMC1_CMD_PORT104_MARK, PORT104_FN3, MSEL4CR_15_1), + PINMUX_DATA(IRQ11_MARK, PORT104_FN0), + + /* Port105 */ + PINMUX_DATA(CS5A_PORT105_MARK, PORT105_FN1, MSEL5CR_2_0), + PINMUX_DATA(SCIFA3_RTS_PORT105_MARK, PORT105_FN4, MSEL5CR_8_0), + + /* Port106 */ + PINMUX_DATA(IOIS16_MARK, PORT106_FN1), + PINMUX_DATA(IDE_EXBUF_ENB_MARK, PORT106_FN6), + + /* Port107 - Port115 Function */ + PINMUX_DATA(WE3_ICIOWR_MARK, PORT107_FN1), + PINMUX_DATA(WE2_ICIORD_MARK, PORT108_FN1), + PINMUX_DATA(CS0_MARK, PORT109_FN1), + PINMUX_DATA(CS2_MARK, PORT110_FN1), + PINMUX_DATA(CS4_MARK, PORT111_FN1), + PINMUX_DATA(WE1_MARK, PORT112_FN1), + PINMUX_DATA(WE0_FWE_MARK, PORT113_FN1), + PINMUX_DATA(RDWR_MARK, PORT114_FN1), + PINMUX_DATA(RD_FSC_MARK, PORT115_FN1), + + /* Port116 */ + PINMUX_DATA(A25_MARK, PORT116_FN1), + PINMUX_DATA(MSIOF0_SS2_MARK, PORT116_FN2), + PINMUX_DATA(MSIOF1_SS2_PORT116_MARK, PORT116_FN3, MSEL4CR_10_0), + PINMUX_DATA(SCIFA3_SCK_PORT116_MARK, PORT116_FN4, MSEL5CR_8_0), + PINMUX_DATA(GPO1_MARK, PORT116_FN5), + + /* Port117 */ + PINMUX_DATA(A24_MARK, PORT117_FN1), + PINMUX_DATA(MSIOF0_SS1_MARK, PORT117_FN2), + PINMUX_DATA(MSIOF1_SS1_PORT117_MARK, PORT117_FN3, MSEL4CR_10_0), + PINMUX_DATA(SCIFA3_CTS_PORT117_MARK, PORT117_FN4, MSEL5CR_8_0), + PINMUX_DATA(GPO0_MARK, PORT117_FN5), + + /* Port118 */ + PINMUX_DATA(A23_MARK, PORT118_FN1), + PINMUX_DATA(MSIOF0_MCK1_MARK, PORT118_FN2), + PINMUX_DATA(MSIOF1_RXD_PORT118_MARK, PORT118_FN3, MSEL4CR_10_0), + PINMUX_DATA(GPI1_MARK, PORT118_FN5), + PINMUX_DATA(IRQ9_PORT118_MARK, PORT118_FN0, MSEL1CR_9_0), + + /* Port119 */ + PINMUX_DATA(A22_MARK, PORT119_FN1), + PINMUX_DATA(MSIOF0_MCK0_MARK, PORT119_FN2), + PINMUX_DATA(MSIOF1_TXD_PORT119_MARK, PORT119_FN3, MSEL4CR_10_0), + PINMUX_DATA(GPI0_MARK, PORT119_FN5), + PINMUX_DATA(IRQ8_MARK, PORT119_FN0), + + /* Port120 */ + PINMUX_DATA(A21_MARK, PORT120_FN1), + PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT120_FN2), + PINMUX_DATA(MSIOF1_TSYNC_PORT120_MARK, PORT120_FN3, MSEL4CR_10_0), + PINMUX_DATA(IRQ7_PORT120_MARK, PORT120_FN0, MSEL1CR_7_0), + + /* Port121 */ + PINMUX_DATA(A20_MARK, PORT121_FN1), + PINMUX_DATA(MSIOF0_RSCK_MARK, PORT121_FN2), + PINMUX_DATA(MSIOF1_TSCK_PORT121_MARK, PORT121_FN3, MSEL4CR_10_0), + PINMUX_DATA(IRQ6_PORT121_MARK, PORT121_FN0, MSEL1CR_6_0), + + /* Port122 */ + PINMUX_DATA(A19_MARK, PORT122_FN1), + PINMUX_DATA(MSIOF0_RXD_MARK, PORT122_FN2), + + /* Port123 */ + PINMUX_DATA(A18_MARK, PORT123_FN1), + PINMUX_DATA(MSIOF0_TSCK_MARK, PORT123_FN2), + + /* Port124 */ + PINMUX_DATA(A17_MARK, PORT124_FN1), + PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT124_FN2), + + /* Port125 - Port141 Function */ + PINMUX_DATA(A16_MARK, PORT125_FN1), + PINMUX_DATA(A15_MARK, PORT126_FN1), + PINMUX_DATA(A14_MARK, PORT127_FN1), + PINMUX_DATA(A13_MARK, PORT128_FN1), + PINMUX_DATA(A12_MARK, PORT129_FN1), + PINMUX_DATA(A11_MARK, PORT130_FN1), + PINMUX_DATA(A10_MARK, PORT131_FN1), + PINMUX_DATA(A9_MARK, PORT132_FN1), + PINMUX_DATA(A8_MARK, PORT133_FN1), + PINMUX_DATA(A7_MARK, PORT134_FN1), + PINMUX_DATA(A6_MARK, PORT135_FN1), + PINMUX_DATA(A5_FCDE_MARK, PORT136_FN1), + PINMUX_DATA(A4_FOE_MARK, PORT137_FN1), + PINMUX_DATA(A3_MARK, PORT138_FN1), + PINMUX_DATA(A2_MARK, PORT139_FN1), + PINMUX_DATA(A1_MARK, PORT140_FN1), + PINMUX_DATA(CKO_MARK, PORT141_FN1), + + /* Port142 - Port157 Function1 */ + PINMUX_DATA(D15_NAF15_MARK, PORT142_FN1), + PINMUX_DATA(D14_NAF14_MARK, PORT143_FN1), + PINMUX_DATA(D13_NAF13_MARK, PORT144_FN1), + PINMUX_DATA(D12_NAF12_MARK, PORT145_FN1), + PINMUX_DATA(D11_NAF11_MARK, PORT146_FN1), + PINMUX_DATA(D10_NAF10_MARK, PORT147_FN1), + PINMUX_DATA(D9_NAF9_MARK, PORT148_FN1), + PINMUX_DATA(D8_NAF8_MARK, PORT149_FN1), + PINMUX_DATA(D7_NAF7_MARK, PORT150_FN1), + PINMUX_DATA(D6_NAF6_MARK, PORT151_FN1), + PINMUX_DATA(D5_NAF5_MARK, PORT152_FN1), + PINMUX_DATA(D4_NAF4_MARK, PORT153_FN1), + PINMUX_DATA(D3_NAF3_MARK, PORT154_FN1), + PINMUX_DATA(D2_NAF2_MARK, PORT155_FN1), + PINMUX_DATA(D1_NAF1_MARK, PORT156_FN1), + PINMUX_DATA(D0_NAF0_MARK, PORT157_FN1), + + /* Port142 - Port149 Function3 */ + PINMUX_DATA(MMC1_D7_PORT142_MARK, PORT142_FN3, MSEL4CR_15_1), + PINMUX_DATA(MMC1_D6_PORT143_MARK, PORT143_FN3, MSEL4CR_15_1), + PINMUX_DATA(MMC1_D5_PORT144_MARK, PORT144_FN3, MSEL4CR_15_1), + PINMUX_DATA(MMC1_D4_PORT145_MARK, PORT145_FN3, MSEL4CR_15_1), + PINMUX_DATA(MMC1_D3_PORT146_MARK, PORT146_FN3, MSEL4CR_15_1), + PINMUX_DATA(MMC1_D2_PORT147_MARK, PORT147_FN3, MSEL4CR_15_1), + PINMUX_DATA(MMC1_D1_PORT148_MARK, PORT148_FN3, MSEL4CR_15_1), + PINMUX_DATA(MMC1_D0_PORT149_MARK, PORT149_FN3, MSEL4CR_15_1), + + /* Port158 */ + PINMUX_DATA(D31_MARK, PORT158_FN1), + PINMUX_DATA(SCIFA3_SCK_PORT158_MARK, PORT158_FN2, MSEL5CR_8_1), + PINMUX_DATA(RMII_REF125CK_MARK, PORT158_FN3), + PINMUX_DATA(LCD0_D21_PORT158_MARK, PORT158_FN4, MSEL5CR_6_1), + PINMUX_DATA(IRDA_FIRSEL_MARK, PORT158_FN5), + PINMUX_DATA(IDE_D15_MARK, PORT158_FN6), + + /* Port159 */ + PINMUX_DATA(D30_MARK, PORT159_FN1), + PINMUX_DATA(SCIFA3_RXD_PORT159_MARK, PORT159_FN2, MSEL5CR_8_1), + PINMUX_DATA(RMII_REF50CK_MARK, PORT159_FN3), + PINMUX_DATA(LCD0_D23_PORT159_MARK, PORT159_FN4, MSEL5CR_6_1), + PINMUX_DATA(IDE_D14_MARK, PORT159_FN6), + + /* Port160 */ + PINMUX_DATA(D29_MARK, PORT160_FN1), + PINMUX_DATA(SCIFA3_TXD_PORT160_MARK, PORT160_FN2, MSEL5CR_8_1), + PINMUX_DATA(LCD0_D22_PORT160_MARK, PORT160_FN4, MSEL5CR_6_1), + PINMUX_DATA(VIO1_HD_MARK, PORT160_FN5), + PINMUX_DATA(IDE_D13_MARK, PORT160_FN6), + + /* Port161 */ + PINMUX_DATA(D28_MARK, PORT161_FN1), + PINMUX_DATA(SCIFA3_RTS_PORT161_MARK, PORT161_FN2, MSEL5CR_8_1), + PINMUX_DATA(ET_RX_DV_MARK, PORT161_FN3), + PINMUX_DATA(LCD0_D20_PORT161_MARK, PORT161_FN4, MSEL5CR_6_1), + PINMUX_DATA(IRDA_IN_MARK, PORT161_FN5), + PINMUX_DATA(IDE_D12_MARK, PORT161_FN6), + + /* Port162 */ + PINMUX_DATA(D27_MARK, PORT162_FN1), + PINMUX_DATA(SCIFA3_CTS_PORT162_MARK, PORT162_FN2, MSEL5CR_8_1), + PINMUX_DATA(LCD0_D19_PORT162_MARK, PORT162_FN4, MSEL5CR_6_1), + PINMUX_DATA(IRDA_OUT_MARK, PORT162_FN5), + PINMUX_DATA(IDE_D11_MARK, PORT162_FN6), + + /* Port163 */ + PINMUX_DATA(D26_MARK, PORT163_FN1), + PINMUX_DATA(MSIOF2_SS2_MARK, PORT163_FN2), + PINMUX_DATA(ET_COL_MARK, PORT163_FN3), + PINMUX_DATA(LCD0_D18_PORT163_MARK, PORT163_FN4, MSEL5CR_6_1), + PINMUX_DATA(IROUT_MARK, PORT163_FN5), + PINMUX_DATA(IDE_D10_MARK, PORT163_FN6), + + /* Port164 */ + PINMUX_DATA(D25_MARK, PORT164_FN1), + PINMUX_DATA(MSIOF2_TSYNC_MARK, PORT164_FN2), + PINMUX_DATA(ET_PHY_INT_MARK, PORT164_FN3), + PINMUX_DATA(LCD0_RD_MARK, PORT164_FN4), + PINMUX_DATA(IDE_D9_MARK, PORT164_FN6), + + /* Port165 */ + PINMUX_DATA(D24_MARK, PORT165_FN1), + PINMUX_DATA(MSIOF2_RXD_MARK, PORT165_FN2), + PINMUX_DATA(LCD0_LCLK_PORT165_MARK, PORT165_FN4, MSEL5CR_6_1), + PINMUX_DATA(IDE_D8_MARK, PORT165_FN6), + + /* Port166 - Port171 Function1 */ + PINMUX_DATA(D21_MARK, PORT166_FN1), + PINMUX_DATA(D20_MARK, PORT167_FN1), + PINMUX_DATA(D19_MARK, PORT168_FN1), + PINMUX_DATA(D18_MARK, PORT169_FN1), + PINMUX_DATA(D17_MARK, PORT170_FN1), + PINMUX_DATA(D16_MARK, PORT171_FN1), + + /* Port166 - Port171 Function3 */ + PINMUX_DATA(ET_ETXD5_MARK, PORT166_FN3), + PINMUX_DATA(ET_ETXD4_MARK, PORT167_FN3), + PINMUX_DATA(ET_ETXD3_MARK, PORT168_FN3), + PINMUX_DATA(ET_ETXD2_MARK, PORT169_FN3), + PINMUX_DATA(ET_ETXD1_MARK, PORT170_FN3), + PINMUX_DATA(ET_ETXD0_MARK, PORT171_FN3), + + /* Port166 - Port171 Function6 */ + PINMUX_DATA(IDE_D5_MARK, PORT166_FN6), + PINMUX_DATA(IDE_D4_MARK, PORT167_FN6), + PINMUX_DATA(IDE_D3_MARK, PORT168_FN6), + PINMUX_DATA(IDE_D2_MARK, PORT169_FN6), + PINMUX_DATA(IDE_D1_MARK, PORT170_FN6), + PINMUX_DATA(IDE_D0_MARK, PORT171_FN6), + + /* Port167 - Port171 IRQ */ + PINMUX_DATA(IRQ31_PORT167_MARK, PORT167_FN0, MSEL1CR_31_0), + PINMUX_DATA(IRQ27_PORT168_MARK, PORT168_FN0, MSEL1CR_27_0), + PINMUX_DATA(IRQ28_PORT169_MARK, PORT169_FN0, MSEL1CR_28_0), + PINMUX_DATA(IRQ29_PORT170_MARK, PORT170_FN0, MSEL1CR_29_0), + PINMUX_DATA(IRQ30_PORT171_MARK, PORT171_FN0, MSEL1CR_30_0), + + /* Port172 */ + PINMUX_DATA(D23_MARK, PORT172_FN1), + PINMUX_DATA(SCIFB_RTS_PORT172_MARK, PORT172_FN2, MSEL5CR_17_1), + PINMUX_DATA(ET_ETXD7_MARK, PORT172_FN3), + PINMUX_DATA(IDE_D7_MARK, PORT172_FN6), + PINMUX_DATA(IRQ4_PORT172_MARK, PORT172_FN0, MSEL1CR_4_1), + + /* Port173 */ + PINMUX_DATA(D22_MARK, PORT173_FN1), + PINMUX_DATA(SCIFB_CTS_PORT173_MARK, PORT173_FN2, MSEL5CR_17_1), + PINMUX_DATA(ET_ETXD6_MARK, PORT173_FN3), + PINMUX_DATA(IDE_D6_MARK, PORT173_FN6), + PINMUX_DATA(IRQ6_PORT173_MARK, PORT173_FN0, MSEL1CR_6_1), + + /* Port174 */ + PINMUX_DATA(A26_MARK, PORT174_FN1), + PINMUX_DATA(MSIOF0_TXD_MARK, PORT174_FN2), + PINMUX_DATA(ET_RX_CLK_MARK, PORT174_FN3), + PINMUX_DATA(SCIFA3_RXD_PORT174_MARK, PORT174_FN4, MSEL5CR_8_0), + + /* Port175 */ + PINMUX_DATA(A0_MARK, PORT175_FN1), + PINMUX_DATA(BS_MARK, PORT175_FN2), + PINMUX_DATA(ET_WOL_MARK, PORT175_FN3), + PINMUX_DATA(SCIFA3_TXD_PORT175_MARK, PORT175_FN4, MSEL5CR_8_0), + + /* Port176 */ + PINMUX_DATA(ET_GTX_CLK_MARK, PORT176_FN3), + + /* Port177 */ + PINMUX_DATA(WAIT_PORT177_MARK, PORT177_FN1, MSEL5CR_2_0), + PINMUX_DATA(ET_LINK_MARK, PORT177_FN3), + PINMUX_DATA(IDE_IOWR_MARK, PORT177_FN6), + PINMUX_DATA(SDHI2_WP_PORT177_MARK, PORT177_FN7, MSEL5CR_19_1), + + /* Port178 */ + PINMUX_DATA(VIO0_D12_MARK, PORT178_FN1), + PINMUX_DATA(VIO1_D4_MARK, PORT178_FN5), + PINMUX_DATA(IDE_IORD_MARK, PORT178_FN6), + + /* Port179 */ + PINMUX_DATA(VIO0_D11_MARK, PORT179_FN1), + PINMUX_DATA(VIO1_D3_MARK, PORT179_FN5), + PINMUX_DATA(IDE_IORDY_MARK, PORT179_FN6), + + /* Port180 */ + PINMUX_DATA(VIO0_D10_MARK, PORT180_FN1), + PINMUX_DATA(TPU0TO3_MARK, PORT180_FN4), + PINMUX_DATA(VIO1_D2_MARK, PORT180_FN5), + PINMUX_DATA(IDE_INT_MARK, PORT180_FN6), + PINMUX_DATA(IRQ24_MARK, PORT180_FN0), + + /* Port181 */ + PINMUX_DATA(VIO0_D9_MARK, PORT181_FN1), + PINMUX_DATA(VIO1_D1_MARK, PORT181_FN5), + PINMUX_DATA(IDE_RST_MARK, PORT181_FN6), + + /* Port182 */ + PINMUX_DATA(VIO0_D8_MARK, PORT182_FN1), + PINMUX_DATA(VIO1_D0_MARK, PORT182_FN5), + PINMUX_DATA(IDE_DIRECTION_MARK, PORT182_FN6), + + /* Port183 */ + PINMUX_DATA(DREQ1_MARK, PORT183_FN1), + PINMUX_DATA(BBIF2_TXD2_PORT183_MARK, PORT183_FN2, MSEL5CR_0_1), + PINMUX_DATA(ET_TX_EN_MARK, PORT183_FN3), + + /* Port184 */ + PINMUX_DATA(DACK1_MARK, PORT184_FN1), + PINMUX_DATA(BBIF2_TSYNC2_PORT184_MARK, PORT184_FN2, MSEL5CR_0_1), + PINMUX_DATA(ET_TX_CLK_MARK, PORT184_FN3), + + /* Port185 - Port192 Function1 */ + PINMUX_DATA(SCIFA1_SCK_MARK, PORT185_FN1), + PINMUX_DATA(SCIFB_RTS_PORT186_MARK, PORT186_FN1, MSEL5CR_17_0), + PINMUX_DATA(SCIFB_CTS_PORT187_MARK, PORT187_FN1, MSEL5CR_17_0), + PINMUX_DATA(SCIFA0_SCK_MARK, PORT188_FN1), + PINMUX_DATA(SCIFB_SCK_PORT190_MARK, PORT190_FN1, MSEL5CR_17_0), + PINMUX_DATA(SCIFB_RXD_PORT191_MARK, PORT191_FN1, MSEL5CR_17_0), + PINMUX_DATA(SCIFB_TXD_PORT192_MARK, PORT192_FN1, MSEL5CR_17_0), + + /* Port185 - Port192 Function3 */ + PINMUX_DATA(ET_ERXD0_MARK, PORT185_FN3), + PINMUX_DATA(ET_ERXD1_MARK, PORT186_FN3), + PINMUX_DATA(ET_ERXD2_MARK, PORT187_FN3), + PINMUX_DATA(ET_ERXD3_MARK, PORT188_FN3), + PINMUX_DATA(ET_ERXD4_MARK, PORT189_FN3), + PINMUX_DATA(ET_ERXD5_MARK, PORT190_FN3), + PINMUX_DATA(ET_ERXD6_MARK, PORT191_FN3), + PINMUX_DATA(ET_ERXD7_MARK, PORT192_FN3), + + /* Port185 - Port192 Function6 */ + PINMUX_DATA(STP1_IPCLK_MARK, PORT185_FN6), + PINMUX_DATA(STP1_IPD0_PORT186_MARK, PORT186_FN6, MSEL5CR_23_0), + PINMUX_DATA(STP1_IPEN_PORT187_MARK, PORT187_FN6, MSEL5CR_23_0), + PINMUX_DATA(STP1_IPSYNC_MARK, PORT188_FN6), + PINMUX_DATA(STP0_IPCLK_MARK, PORT189_FN6), + PINMUX_DATA(STP0_IPD0_MARK, PORT190_FN6), + PINMUX_DATA(STP0_IPEN_MARK, PORT191_FN6), + PINMUX_DATA(STP0_IPSYNC_MARK, PORT192_FN6), + + /* Port193 */ + PINMUX_DATA(SCIFA0_CTS_MARK, PORT193_FN1), + PINMUX_DATA(RMII_CRS_DV_MARK, PORT193_FN3), + PINMUX_DATA(STP1_IPEN_PORT193_MARK, PORT193_FN6, MSEL5CR_23_1), + PINMUX_DATA(LCD1_D17_MARK, PORT193_FN7), + + /* Port194 */ + PINMUX_DATA(SCIFA0_RTS_MARK, PORT194_FN1), + PINMUX_DATA(RMII_RX_ER_MARK, PORT194_FN3), + PINMUX_DATA(STP1_IPD0_PORT194_MARK, PORT194_FN6, MSEL5CR_23_1), + PINMUX_DATA(LCD1_D16_MARK, PORT194_FN7), + + /* Port195 */ + PINMUX_DATA(SCIFA1_RXD_MARK, PORT195_FN1), + PINMUX_DATA(RMII_RXD0_MARK, PORT195_FN3), + PINMUX_DATA(STP1_IPD3_MARK, PORT195_FN6), + PINMUX_DATA(LCD1_D15_MARK, PORT195_FN7), + + /* Port196 */ + PINMUX_DATA(SCIFA1_TXD_MARK, PORT196_FN1), + PINMUX_DATA(RMII_RXD1_MARK, PORT196_FN3), + PINMUX_DATA(STP1_IPD2_MARK, PORT196_FN6), + PINMUX_DATA(LCD1_D14_MARK, PORT196_FN7), + + /* Port197 */ + PINMUX_DATA(SCIFA0_RXD_MARK, PORT197_FN1), + PINMUX_DATA(VIO1_CLK_MARK, PORT197_FN5), + PINMUX_DATA(STP1_IPD5_MARK, PORT197_FN6), + PINMUX_DATA(LCD1_D19_MARK, PORT197_FN7), + + /* Port198 */ + PINMUX_DATA(SCIFA0_TXD_MARK, PORT198_FN1), + PINMUX_DATA(VIO1_VD_MARK, PORT198_FN5), + PINMUX_DATA(STP1_IPD4_MARK, PORT198_FN6), + PINMUX_DATA(LCD1_D18_MARK, PORT198_FN7), + + /* Port199 */ + PINMUX_DATA(MEMC_NWE_MARK, PORT199_FN1), + PINMUX_DATA(SCIFA2_SCK_PORT199_MARK, PORT199_FN2, MSEL5CR_7_1), + PINMUX_DATA(RMII_TX_EN_MARK, PORT199_FN3), + PINMUX_DATA(SIM_D_PORT199_MARK, PORT199_FN4, MSEL5CR_21_1), + PINMUX_DATA(STP1_IPD1_MARK, PORT199_FN6), + PINMUX_DATA(LCD1_D13_MARK, PORT199_FN7), + + /* Port200 */ + PINMUX_DATA(MEMC_NOE_MARK, PORT200_FN1), + PINMUX_DATA(SCIFA2_RXD_MARK, PORT200_FN2), + PINMUX_DATA(RMII_TXD0_MARK, PORT200_FN3), + PINMUX_DATA(STP0_IPD7_MARK, PORT200_FN6), + PINMUX_DATA(LCD1_D12_MARK, PORT200_FN7), + + /* Port201 */ + PINMUX_DATA(MEMC_WAIT_MARK, PORT201_FN1, MSEL4CR_6_0), + PINMUX_DATA(MEMC_DREQ1_MARK, PORT201_FN1, MSEL4CR_6_1), + + PINMUX_DATA(SCIFA2_TXD_MARK, PORT201_FN2), + PINMUX_DATA(RMII_TXD1_MARK, PORT201_FN3), + PINMUX_DATA(STP0_IPD6_MARK, PORT201_FN6), + PINMUX_DATA(LCD1_D11_MARK, PORT201_FN7), + + /* Port202 */ + PINMUX_DATA(MEMC_BUSCLK_MARK, PORT202_FN1, MSEL4CR_6_0), + PINMUX_DATA(MEMC_A0_MARK, PORT202_FN1, MSEL4CR_6_1), + + PINMUX_DATA(MSIOF1_SS2_PORT202_MARK, PORT202_FN2, MSEL4CR_10_1), + PINMUX_DATA(RMII_MDC_MARK, PORT202_FN3), + PINMUX_DATA(TPU0TO2_PORT202_MARK, PORT202_FN4, MSEL5CR_25_1), + PINMUX_DATA(IDE_CS0_MARK, PORT202_FN6), + PINMUX_DATA(SDHI2_CD_PORT202_MARK, PORT202_FN7, MSEL5CR_19_1), + PINMUX_DATA(IRQ21_MARK, PORT202_FN0), + + /* Port203 - Port208 Function1 */ + PINMUX_DATA(SDHI2_CLK_MARK, PORT203_FN1), + PINMUX_DATA(SDHI2_CMD_MARK, PORT204_FN1), + PINMUX_DATA(SDHI2_D0_MARK, PORT205_FN1), + PINMUX_DATA(SDHI2_D1_MARK, PORT206_FN1), + PINMUX_DATA(SDHI2_D2_MARK, PORT207_FN1), + PINMUX_DATA(SDHI2_D3_MARK, PORT208_FN1), + + /* Port203 - Port208 Function3 */ + PINMUX_DATA(ET_TX_ER_MARK, PORT203_FN3), + PINMUX_DATA(ET_RX_ER_MARK, PORT204_FN3), + PINMUX_DATA(ET_CRS_MARK, PORT205_FN3), + PINMUX_DATA(ET_MDC_MARK, PORT206_FN3), + PINMUX_DATA(ET_MDIO_MARK, PORT207_FN3), + PINMUX_DATA(RMII_MDIO_MARK, PORT208_FN3), + + /* Port203 - Port208 Function6 */ + PINMUX_DATA(IDE_A2_MARK, PORT203_FN6), + PINMUX_DATA(IDE_A1_MARK, PORT204_FN6), + PINMUX_DATA(IDE_A0_MARK, PORT205_FN6), + PINMUX_DATA(IDE_IODACK_MARK, PORT206_FN6), + PINMUX_DATA(IDE_IODREQ_MARK, PORT207_FN6), + PINMUX_DATA(IDE_CS1_MARK, PORT208_FN6), + + /* Port203 - Port208 Function7 */ + PINMUX_DATA(SCIFA4_TXD_PORT203_MARK, PORT203_FN7, MSEL5CR_12_0, + MSEL5CR_11_1), + PINMUX_DATA(SCIFA4_RXD_PORT204_MARK, PORT204_FN7, MSEL5CR_12_0, + MSEL5CR_11_1), + PINMUX_DATA(SCIFA4_SCK_PORT205_MARK, PORT205_FN7, MSEL5CR_10_1), + PINMUX_DATA(SCIFA5_SCK_PORT206_MARK, PORT206_FN7, MSEL5CR_13_1), + PINMUX_DATA(SCIFA5_RXD_PORT207_MARK, PORT207_FN7, MSEL5CR_15_0, + MSEL5CR_14_1), + PINMUX_DATA(SCIFA5_TXD_PORT208_MARK, PORT208_FN7, MSEL5CR_15_0, + MSEL5CR_14_1), + + /* Port209 */ + PINMUX_DATA(VBUS_MARK, PORT209_FN1), + PINMUX_DATA(IRQ7_PORT209_MARK, PORT209_FN0, MSEL1CR_7_1), + + /* Port210 */ + PINMUX_DATA(IRQ9_PORT210_MARK, PORT210_FN0, MSEL1CR_9_1), + + /* Port211 */ + PINMUX_DATA(IRQ16_PORT211_MARK, PORT211_FN0, MSEL1CR_16_1), + + /* LCDC select */ + PINMUX_DATA(LCDC0_SELECT_MARK, MSEL3CR_6_0), + PINMUX_DATA(LCDC1_SELECT_MARK, MSEL3CR_6_1), + + /* SDENC */ + PINMUX_DATA(SDENC_CPG_MARK, MSEL4CR_19_0), + PINMUX_DATA(SDENC_DV_CLKI_MARK, MSEL4CR_19_1), + + /* SYSC */ + PINMUX_DATA(RESETP_PULLUP_MARK, MSEL4CR_4_0), + PINMUX_DATA(RESETP_PLAIN_MARK, MSEL4CR_4_1), + + /* DEBUG */ + PINMUX_DATA(EDEBGREQ_PULLDOWN_MARK, MSEL4CR_1_0), + PINMUX_DATA(EDEBGREQ_PULLUP_MARK, MSEL4CR_1_1), + + PINMUX_DATA(TRACEAUD_FROM_VIO_MARK, MSEL5CR_30_0, MSEL5CR_29_0), + PINMUX_DATA(TRACEAUD_FROM_LCDC0_MARK, MSEL5CR_30_0, MSEL5CR_29_1), + PINMUX_DATA(TRACEAUD_FROM_MEMC_MARK, MSEL5CR_30_1, MSEL5CR_29_0), +}; + +static struct pinmux_gpio pinmux_gpios[] = { + + /* PORT */ + GPIO_PORT_ALL(), + + /* IRQ */ + GPIO_FN(IRQ0_PORT2), GPIO_FN(IRQ0_PORT13), + GPIO_FN(IRQ1), + GPIO_FN(IRQ2_PORT11), GPIO_FN(IRQ2_PORT12), + GPIO_FN(IRQ3_PORT10), GPIO_FN(IRQ3_PORT14), + GPIO_FN(IRQ4_PORT15), GPIO_FN(IRQ4_PORT172), + GPIO_FN(IRQ5_PORT0), GPIO_FN(IRQ5_PORT1), + GPIO_FN(IRQ6_PORT121), GPIO_FN(IRQ6_PORT173), + GPIO_FN(IRQ7_PORT120), GPIO_FN(IRQ7_PORT209), + GPIO_FN(IRQ8), + GPIO_FN(IRQ9_PORT118), GPIO_FN(IRQ9_PORT210), + GPIO_FN(IRQ10), + GPIO_FN(IRQ11), + GPIO_FN(IRQ12_PORT42), GPIO_FN(IRQ12_PORT97), + GPIO_FN(IRQ13_PORT64), GPIO_FN(IRQ13_PORT98), + GPIO_FN(IRQ14_PORT63), GPIO_FN(IRQ14_PORT99), + GPIO_FN(IRQ15_PORT62), GPIO_FN(IRQ15_PORT100), + GPIO_FN(IRQ16_PORT68), GPIO_FN(IRQ16_PORT211), + GPIO_FN(IRQ17), + GPIO_FN(IRQ18), + GPIO_FN(IRQ19), + GPIO_FN(IRQ20), + GPIO_FN(IRQ21), + GPIO_FN(IRQ22), + GPIO_FN(IRQ23), + GPIO_FN(IRQ24), + GPIO_FN(IRQ25), + GPIO_FN(IRQ26_PORT58), GPIO_FN(IRQ26_PORT81), + GPIO_FN(IRQ27_PORT57), GPIO_FN(IRQ27_PORT168), + GPIO_FN(IRQ28_PORT56), GPIO_FN(IRQ28_PORT169), + GPIO_FN(IRQ29_PORT50), GPIO_FN(IRQ29_PORT170), + GPIO_FN(IRQ30_PORT49), GPIO_FN(IRQ30_PORT171), + GPIO_FN(IRQ31_PORT41), GPIO_FN(IRQ31_PORT167), + + /* Function */ + + /* DBGT */ + GPIO_FN(DBGMDT2), GPIO_FN(DBGMDT1), GPIO_FN(DBGMDT0), + GPIO_FN(DBGMD10), GPIO_FN(DBGMD11), GPIO_FN(DBGMD20), + GPIO_FN(DBGMD21), + + /* FSI */ + GPIO_FN(FSIAISLD_PORT0), /* FSIAISLD Port 0/5 */ + GPIO_FN(FSIAISLD_PORT5), + GPIO_FN(FSIASPDIF_PORT9), /* FSIASPDIF Port 9/18 */ + GPIO_FN(FSIASPDIF_PORT18), + GPIO_FN(FSIAOSLD1), GPIO_FN(FSIAOSLD2), GPIO_FN(FSIAOLR), + GPIO_FN(FSIAOBT), GPIO_FN(FSIAOSLD), GPIO_FN(FSIAOMC), + GPIO_FN(FSIACK), GPIO_FN(FSIAILR), GPIO_FN(FSIAIBT), + + /* FMSI */ + GPIO_FN(FMSISLD_PORT1), /* FMSISLD Port 1/6 */ + GPIO_FN(FMSISLD_PORT6), + GPIO_FN(FMSIILR), GPIO_FN(FMSIIBT), GPIO_FN(FMSIOLR), + GPIO_FN(FMSIOBT), GPIO_FN(FMSICK), GPIO_FN(FMSOILR), + GPIO_FN(FMSOIBT), GPIO_FN(FMSOOLR), GPIO_FN(FMSOOBT), + GPIO_FN(FMSOSLD), GPIO_FN(FMSOCK), + + /* SCIFA0 */ + GPIO_FN(SCIFA0_SCK), GPIO_FN(SCIFA0_CTS), GPIO_FN(SCIFA0_RTS), + GPIO_FN(SCIFA0_RXD), GPIO_FN(SCIFA0_TXD), + + /* SCIFA1 */ + GPIO_FN(SCIFA1_CTS), GPIO_FN(SCIFA1_SCK), + GPIO_FN(SCIFA1_RXD), GPIO_FN(SCIFA1_TXD), GPIO_FN(SCIFA1_RTS), + + /* SCIFA2 */ + GPIO_FN(SCIFA2_SCK_PORT22), /* SCIFA2_SCK Port 22/199 */ + GPIO_FN(SCIFA2_SCK_PORT199), + GPIO_FN(SCIFA2_RXD), GPIO_FN(SCIFA2_TXD), + GPIO_FN(SCIFA2_CTS), GPIO_FN(SCIFA2_RTS), + + /* SCIFA3 */ + GPIO_FN(SCIFA3_RTS_PORT105), /* MSEL5CR_8_0 */ + GPIO_FN(SCIFA3_SCK_PORT116), + GPIO_FN(SCIFA3_CTS_PORT117), + GPIO_FN(SCIFA3_RXD_PORT174), + GPIO_FN(SCIFA3_TXD_PORT175), + + GPIO_FN(SCIFA3_RTS_PORT161), /* MSEL5CR_8_1 */ + GPIO_FN(SCIFA3_SCK_PORT158), + GPIO_FN(SCIFA3_CTS_PORT162), + GPIO_FN(SCIFA3_RXD_PORT159), + GPIO_FN(SCIFA3_TXD_PORT160), + + /* SCIFA4 */ + GPIO_FN(SCIFA4_RXD_PORT12), /* MSEL5CR[12:11] = 00 */ + GPIO_FN(SCIFA4_TXD_PORT13), + + GPIO_FN(SCIFA4_RXD_PORT204), /* MSEL5CR[12:11] = 01 */ + GPIO_FN(SCIFA4_TXD_PORT203), + + GPIO_FN(SCIFA4_RXD_PORT94), /* MSEL5CR[12:11] = 10 */ + GPIO_FN(SCIFA4_TXD_PORT93), + + GPIO_FN(SCIFA4_SCK_PORT21), /* SCIFA4_SCK Port 21/205 */ + GPIO_FN(SCIFA4_SCK_PORT205), + + /* SCIFA5 */ + GPIO_FN(SCIFA5_TXD_PORT20), /* MSEL5CR[15:14] = 00 */ + GPIO_FN(SCIFA5_RXD_PORT10), + + GPIO_FN(SCIFA5_RXD_PORT207), /* MSEL5CR[15:14] = 01 */ + GPIO_FN(SCIFA5_TXD_PORT208), + + GPIO_FN(SCIFA5_TXD_PORT91), /* MSEL5CR[15:14] = 10 */ + GPIO_FN(SCIFA5_RXD_PORT92), + + GPIO_FN(SCIFA5_SCK_PORT23), /* SCIFA5_SCK Port 23/206 */ + GPIO_FN(SCIFA5_SCK_PORT206), + + /* SCIFA6 */ + GPIO_FN(SCIFA6_SCK), GPIO_FN(SCIFA6_RXD), GPIO_FN(SCIFA6_TXD), + + /* SCIFA7 */ + GPIO_FN(SCIFA7_TXD), GPIO_FN(SCIFA7_RXD), + + /* SCIFAB */ + GPIO_FN(SCIFB_SCK_PORT190), /* MSEL5CR_17_0 */ + GPIO_FN(SCIFB_RXD_PORT191), + GPIO_FN(SCIFB_TXD_PORT192), + GPIO_FN(SCIFB_RTS_PORT186), + GPIO_FN(SCIFB_CTS_PORT187), + + GPIO_FN(SCIFB_SCK_PORT2), /* MSEL5CR_17_1 */ + GPIO_FN(SCIFB_RXD_PORT3), + GPIO_FN(SCIFB_TXD_PORT4), + GPIO_FN(SCIFB_RTS_PORT172), + GPIO_FN(SCIFB_CTS_PORT173), + + /* LCD0 */ + GPIO_FN(LCD0_D0), GPIO_FN(LCD0_D1), GPIO_FN(LCD0_D2), + GPIO_FN(LCD0_D3), GPIO_FN(LCD0_D4), GPIO_FN(LCD0_D5), + GPIO_FN(LCD0_D6), GPIO_FN(LCD0_D7), GPIO_FN(LCD0_D8), + GPIO_FN(LCD0_D9), GPIO_FN(LCD0_D10), GPIO_FN(LCD0_D11), + GPIO_FN(LCD0_D12), GPIO_FN(LCD0_D13), GPIO_FN(LCD0_D14), + GPIO_FN(LCD0_D15), GPIO_FN(LCD0_D16), GPIO_FN(LCD0_D17), + GPIO_FN(LCD0_DON), GPIO_FN(LCD0_VCPWC), GPIO_FN(LCD0_VEPWC), + GPIO_FN(LCD0_DCK), GPIO_FN(LCD0_VSYN), + GPIO_FN(LCD0_HSYN), GPIO_FN(LCD0_DISP), + GPIO_FN(LCD0_WR), GPIO_FN(LCD0_RD), + GPIO_FN(LCD0_CS), GPIO_FN(LCD0_RS), + + GPIO_FN(LCD0_D18_PORT163), GPIO_FN(LCD0_D19_PORT162), + GPIO_FN(LCD0_D20_PORT161), GPIO_FN(LCD0_D21_PORT158), + GPIO_FN(LCD0_D22_PORT160), GPIO_FN(LCD0_D23_PORT159), + GPIO_FN(LCD0_LCLK_PORT165), /* MSEL5CR_6_1 */ + + GPIO_FN(LCD0_D18_PORT40), GPIO_FN(LCD0_D19_PORT4), + GPIO_FN(LCD0_D20_PORT3), GPIO_FN(LCD0_D21_PORT2), + GPIO_FN(LCD0_D22_PORT0), GPIO_FN(LCD0_D23_PORT1), + GPIO_FN(LCD0_LCLK_PORT102), /* MSEL5CR_6_0 */ + + /* LCD1 */ + GPIO_FN(LCD1_D0), GPIO_FN(LCD1_D1), GPIO_FN(LCD1_D2), + GPIO_FN(LCD1_D3), GPIO_FN(LCD1_D4), GPIO_FN(LCD1_D5), + GPIO_FN(LCD1_D6), GPIO_FN(LCD1_D7), GPIO_FN(LCD1_D8), + GPIO_FN(LCD1_D9), GPIO_FN(LCD1_D10), GPIO_FN(LCD1_D11), + GPIO_FN(LCD1_D12), GPIO_FN(LCD1_D13), GPIO_FN(LCD1_D14), + GPIO_FN(LCD1_D15), GPIO_FN(LCD1_D16), GPIO_FN(LCD1_D17), + GPIO_FN(LCD1_D18), GPIO_FN(LCD1_D19), GPIO_FN(LCD1_D20), + GPIO_FN(LCD1_D21), GPIO_FN(LCD1_D22), GPIO_FN(LCD1_D23), + GPIO_FN(LCD1_RS), GPIO_FN(LCD1_RD), GPIO_FN(LCD1_CS), + GPIO_FN(LCD1_WR), GPIO_FN(LCD1_DCK), GPIO_FN(LCD1_DON), + GPIO_FN(LCD1_VCPWC), GPIO_FN(LCD1_LCLK), GPIO_FN(LCD1_HSYN), + GPIO_FN(LCD1_VSYN), GPIO_FN(LCD1_VEPWC), GPIO_FN(LCD1_DISP), + + /* RSPI */ + GPIO_FN(RSPI_SSL0_A), GPIO_FN(RSPI_SSL1_A), GPIO_FN(RSPI_SSL2_A), + GPIO_FN(RSPI_SSL3_A), GPIO_FN(RSPI_CK_A), GPIO_FN(RSPI_MOSI_A), + GPIO_FN(RSPI_MISO_A), + + /* VIO CKO */ + GPIO_FN(VIO_CKO1), + GPIO_FN(VIO_CKO2), + GPIO_FN(VIO_CKO_1), + GPIO_FN(VIO_CKO), + + /* VIO0 */ + GPIO_FN(VIO0_D0), GPIO_FN(VIO0_D1), GPIO_FN(VIO0_D2), + GPIO_FN(VIO0_D3), GPIO_FN(VIO0_D4), GPIO_FN(VIO0_D5), + GPIO_FN(VIO0_D6), GPIO_FN(VIO0_D7), GPIO_FN(VIO0_D8), + GPIO_FN(VIO0_D9), GPIO_FN(VIO0_D10), GPIO_FN(VIO0_D11), + GPIO_FN(VIO0_D12), GPIO_FN(VIO0_VD), GPIO_FN(VIO0_HD), + GPIO_FN(VIO0_CLK), GPIO_FN(VIO0_FIELD), + + GPIO_FN(VIO0_D13_PORT26), /* MSEL5CR_27_0 */ + GPIO_FN(VIO0_D14_PORT25), + GPIO_FN(VIO0_D15_PORT24), + + GPIO_FN(VIO0_D13_PORT22), /* MSEL5CR_27_1 */ + GPIO_FN(VIO0_D14_PORT95), + GPIO_FN(VIO0_D15_PORT96), + + /* VIO1 */ + GPIO_FN(VIO1_D0), GPIO_FN(VIO1_D1), GPIO_FN(VIO1_D2), + GPIO_FN(VIO1_D3), GPIO_FN(VIO1_D4), GPIO_FN(VIO1_D5), + GPIO_FN(VIO1_D6), GPIO_FN(VIO1_D7), GPIO_FN(VIO1_VD), + GPIO_FN(VIO1_HD), GPIO_FN(VIO1_CLK), GPIO_FN(VIO1_FIELD), + + /* TPU0 */ + GPIO_FN(TPU0TO0), GPIO_FN(TPU0TO1), GPIO_FN(TPU0TO3), + GPIO_FN(TPU0TO2_PORT66), /* TPU0TO2 Port 66/202 */ + GPIO_FN(TPU0TO2_PORT202), + + /* SSP1 0 */ + GPIO_FN(STP0_IPD0), GPIO_FN(STP0_IPD1), GPIO_FN(STP0_IPD2), + GPIO_FN(STP0_IPD3), GPIO_FN(STP0_IPD4), GPIO_FN(STP0_IPD5), + GPIO_FN(STP0_IPD6), GPIO_FN(STP0_IPD7), GPIO_FN(STP0_IPEN), + GPIO_FN(STP0_IPCLK), GPIO_FN(STP0_IPSYNC), + + /* SSP1 1 */ + GPIO_FN(STP1_IPD1), GPIO_FN(STP1_IPD2), GPIO_FN(STP1_IPD3), + GPIO_FN(STP1_IPD4), GPIO_FN(STP1_IPD5), GPIO_FN(STP1_IPD6), + GPIO_FN(STP1_IPD7), GPIO_FN(STP1_IPCLK), GPIO_FN(STP1_IPSYNC), + + GPIO_FN(STP1_IPD0_PORT186), /* MSEL5CR_23_0 */ + GPIO_FN(STP1_IPEN_PORT187), + + GPIO_FN(STP1_IPD0_PORT194), /* MSEL5CR_23_1 */ + GPIO_FN(STP1_IPEN_PORT193), + + /* SIM */ + GPIO_FN(SIM_RST), GPIO_FN(SIM_CLK), + GPIO_FN(SIM_D_PORT22), /* SIM_D Port 22/199 */ + GPIO_FN(SIM_D_PORT199), + + /* SDHI0 */ + GPIO_FN(SDHI0_D0), GPIO_FN(SDHI0_D1), GPIO_FN(SDHI0_D2), + GPIO_FN(SDHI0_D3), GPIO_FN(SDHI0_CD), GPIO_FN(SDHI0_WP), + GPIO_FN(SDHI0_CMD), GPIO_FN(SDHI0_CLK), + + /* SDHI1 */ + GPIO_FN(SDHI1_D0), GPIO_FN(SDHI1_D1), GPIO_FN(SDHI1_D2), + GPIO_FN(SDHI1_D3), GPIO_FN(SDHI1_CD), GPIO_FN(SDHI1_WP), + GPIO_FN(SDHI1_CMD), GPIO_FN(SDHI1_CLK), + + /* SDHI2 */ + GPIO_FN(SDHI2_D0), GPIO_FN(SDHI2_D1), GPIO_FN(SDHI2_D2), + GPIO_FN(SDHI2_D3), GPIO_FN(SDHI2_CLK), GPIO_FN(SDHI2_CMD), + + GPIO_FN(SDHI2_CD_PORT24), /* MSEL5CR_19_0 */ + GPIO_FN(SDHI2_WP_PORT25), + + GPIO_FN(SDHI2_WP_PORT177), /* MSEL5CR_19_1 */ + GPIO_FN(SDHI2_CD_PORT202), + + /* MSIOF2 */ + GPIO_FN(MSIOF2_TXD), GPIO_FN(MSIOF2_RXD), GPIO_FN(MSIOF2_TSCK), + GPIO_FN(MSIOF2_SS2), GPIO_FN(MSIOF2_TSYNC), GPIO_FN(MSIOF2_SS1), + GPIO_FN(MSIOF2_MCK1), GPIO_FN(MSIOF2_MCK0), GPIO_FN(MSIOF2_RSYNC), + GPIO_FN(MSIOF2_RSCK), + + /* KEYSC */ + GPIO_FN(KEYIN4), GPIO_FN(KEYIN5), + GPIO_FN(KEYIN6), GPIO_FN(KEYIN7), + GPIO_FN(KEYOUT0), GPIO_FN(KEYOUT1), GPIO_FN(KEYOUT2), + GPIO_FN(KEYOUT3), GPIO_FN(KEYOUT4), GPIO_FN(KEYOUT5), + GPIO_FN(KEYOUT6), GPIO_FN(KEYOUT7), + + GPIO_FN(KEYIN0_PORT43), /* MSEL4CR_18_0 */ + GPIO_FN(KEYIN1_PORT44), + GPIO_FN(KEYIN2_PORT45), + GPIO_FN(KEYIN3_PORT46), + + GPIO_FN(KEYIN0_PORT58), /* MSEL4CR_18_1 */ + GPIO_FN(KEYIN1_PORT57), + GPIO_FN(KEYIN2_PORT56), + GPIO_FN(KEYIN3_PORT55), + + /* VOU */ + GPIO_FN(DV_D0), GPIO_FN(DV_D1), GPIO_FN(DV_D2), + GPIO_FN(DV_D3), GPIO_FN(DV_D4), GPIO_FN(DV_D5), + GPIO_FN(DV_D6), GPIO_FN(DV_D7), GPIO_FN(DV_D8), + GPIO_FN(DV_D9), GPIO_FN(DV_D10), GPIO_FN(DV_D11), + GPIO_FN(DV_D12), GPIO_FN(DV_D13), GPIO_FN(DV_D14), + GPIO_FN(DV_D15), GPIO_FN(DV_CLK), + GPIO_FN(DV_VSYNC), GPIO_FN(DV_HSYNC), + + /* MEMC */ + GPIO_FN(MEMC_AD0), GPIO_FN(MEMC_AD1), GPIO_FN(MEMC_AD2), + GPIO_FN(MEMC_AD3), GPIO_FN(MEMC_AD4), GPIO_FN(MEMC_AD5), + GPIO_FN(MEMC_AD6), GPIO_FN(MEMC_AD7), GPIO_FN(MEMC_AD8), + GPIO_FN(MEMC_AD9), GPIO_FN(MEMC_AD10), GPIO_FN(MEMC_AD11), + GPIO_FN(MEMC_AD12), GPIO_FN(MEMC_AD13), GPIO_FN(MEMC_AD14), + GPIO_FN(MEMC_AD15), GPIO_FN(MEMC_CS0), GPIO_FN(MEMC_INT), + GPIO_FN(MEMC_NWE), GPIO_FN(MEMC_NOE), GPIO_FN(MEMC_CS1), + GPIO_FN(MEMC_A1), GPIO_FN(MEMC_ADV), GPIO_FN(MEMC_DREQ0), + GPIO_FN(MEMC_WAIT), GPIO_FN(MEMC_DREQ1), GPIO_FN(MEMC_BUSCLK), + GPIO_FN(MEMC_A0), + + /* MMC */ + GPIO_FN(MMC0_D0_PORT68), GPIO_FN(MMC0_D1_PORT69), + GPIO_FN(MMC0_D2_PORT70), GPIO_FN(MMC0_D3_PORT71), + GPIO_FN(MMC0_D4_PORT72), GPIO_FN(MMC0_D5_PORT73), + GPIO_FN(MMC0_D6_PORT74), GPIO_FN(MMC0_D7_PORT75), + GPIO_FN(MMC0_CLK_PORT66), + GPIO_FN(MMC0_CMD_PORT67), /* MSEL4CR_15_0 */ + + GPIO_FN(MMC1_D0_PORT149), GPIO_FN(MMC1_D1_PORT148), + GPIO_FN(MMC1_D2_PORT147), GPIO_FN(MMC1_D3_PORT146), + GPIO_FN(MMC1_D4_PORT145), GPIO_FN(MMC1_D5_PORT144), + GPIO_FN(MMC1_D6_PORT143), GPIO_FN(MMC1_D7_PORT142), + GPIO_FN(MMC1_CLK_PORT103), + GPIO_FN(MMC1_CMD_PORT104), /* MSEL4CR_15_1 */ + + /* MSIOF0 */ + GPIO_FN(MSIOF0_SS1), GPIO_FN(MSIOF0_SS2), GPIO_FN(MSIOF0_RXD), + GPIO_FN(MSIOF0_TXD), GPIO_FN(MSIOF0_MCK0), GPIO_FN(MSIOF0_MCK1), + GPIO_FN(MSIOF0_RSYNC), GPIO_FN(MSIOF0_RSCK), GPIO_FN(MSIOF0_TSCK), + GPIO_FN(MSIOF0_TSYNC), + + /* MSIOF1 */ + GPIO_FN(MSIOF1_RSCK), GPIO_FN(MSIOF1_RSYNC), + GPIO_FN(MSIOF1_MCK0), GPIO_FN(MSIOF1_MCK1), + + GPIO_FN(MSIOF1_SS2_PORT116), GPIO_FN(MSIOF1_SS1_PORT117), + GPIO_FN(MSIOF1_RXD_PORT118), GPIO_FN(MSIOF1_TXD_PORT119), + GPIO_FN(MSIOF1_TSYNC_PORT120), + GPIO_FN(MSIOF1_TSCK_PORT121), /* MSEL4CR_10_0 */ + + GPIO_FN(MSIOF1_SS1_PORT67), GPIO_FN(MSIOF1_TSCK_PORT72), + GPIO_FN(MSIOF1_TSYNC_PORT73), GPIO_FN(MSIOF1_TXD_PORT74), + GPIO_FN(MSIOF1_RXD_PORT75), + GPIO_FN(MSIOF1_SS2_PORT202), /* MSEL4CR_10_1 */ + + /* GPIO */ + GPIO_FN(GPO0), GPIO_FN(GPI0), + GPIO_FN(GPO1), GPIO_FN(GPI1), + + /* USB0 */ + GPIO_FN(USB0_OCI), GPIO_FN(USB0_PPON), GPIO_FN(VBUS), + + /* USB1 */ + GPIO_FN(USB1_OCI), GPIO_FN(USB1_PPON), + + /* BBIF1 */ + GPIO_FN(BBIF1_RXD), GPIO_FN(BBIF1_TXD), GPIO_FN(BBIF1_TSYNC), + GPIO_FN(BBIF1_TSCK), GPIO_FN(BBIF1_RSCK), GPIO_FN(BBIF1_RSYNC), + GPIO_FN(BBIF1_FLOW), GPIO_FN(BBIF1_RX_FLOW_N), + + /* BBIF2 */ + GPIO_FN(BBIF2_TXD2_PORT5), /* MSEL5CR_0_0 */ + GPIO_FN(BBIF2_RXD2_PORT60), + GPIO_FN(BBIF2_TSYNC2_PORT6), + GPIO_FN(BBIF2_TSCK2_PORT59), + + GPIO_FN(BBIF2_RXD2_PORT90), /* MSEL5CR_0_1 */ + GPIO_FN(BBIF2_TXD2_PORT183), + GPIO_FN(BBIF2_TSCK2_PORT89), + GPIO_FN(BBIF2_TSYNC2_PORT184), + + /* BSC / FLCTL / PCMCIA */ + GPIO_FN(CS0), GPIO_FN(CS2), GPIO_FN(CS4), + GPIO_FN(CS5B), GPIO_FN(CS6A), + GPIO_FN(CS5A_PORT105), /* CS5A PORT 19/105 */ + GPIO_FN(CS5A_PORT19), + GPIO_FN(IOIS16), /* ? */ + + GPIO_FN(A0), GPIO_FN(A1), GPIO_FN(A2), GPIO_FN(A3), + GPIO_FN(A4_FOE), GPIO_FN(A5_FCDE), /* share with FLCTL */ + GPIO_FN(A6), GPIO_FN(A7), GPIO_FN(A8), GPIO_FN(A9), + GPIO_FN(A10), GPIO_FN(A11), GPIO_FN(A12), GPIO_FN(A13), + GPIO_FN(A14), GPIO_FN(A15), GPIO_FN(A16), GPIO_FN(A17), + GPIO_FN(A18), GPIO_FN(A19), GPIO_FN(A20), GPIO_FN(A21), + GPIO_FN(A22), GPIO_FN(A23), GPIO_FN(A24), GPIO_FN(A25), + GPIO_FN(A26), + + GPIO_FN(D0_NAF0), GPIO_FN(D1_NAF1), /* share with FLCTL */ + GPIO_FN(D2_NAF2), GPIO_FN(D3_NAF3), /* share with FLCTL */ + GPIO_FN(D4_NAF4), GPIO_FN(D5_NAF5), /* share with FLCTL */ + GPIO_FN(D6_NAF6), GPIO_FN(D7_NAF7), /* share with FLCTL */ + GPIO_FN(D8_NAF8), GPIO_FN(D9_NAF9), /* share with FLCTL */ + GPIO_FN(D10_NAF10), GPIO_FN(D11_NAF11), /* share with FLCTL */ + GPIO_FN(D12_NAF12), GPIO_FN(D13_NAF13), /* share with FLCTL */ + GPIO_FN(D14_NAF14), GPIO_FN(D15_NAF15), /* share with FLCTL */ + GPIO_FN(D16), GPIO_FN(D17), GPIO_FN(D18), GPIO_FN(D19), + GPIO_FN(D20), GPIO_FN(D21), GPIO_FN(D22), GPIO_FN(D23), + GPIO_FN(D24), GPIO_FN(D25), GPIO_FN(D26), GPIO_FN(D27), + GPIO_FN(D28), GPIO_FN(D29), GPIO_FN(D30), GPIO_FN(D31), + + GPIO_FN(WE0_FWE), /* share with FLCTL */ + GPIO_FN(WE1), + GPIO_FN(WE2_ICIORD), /* share with PCMCIA */ + GPIO_FN(WE3_ICIOWR), /* share with PCMCIA */ + GPIO_FN(CKO), GPIO_FN(BS), GPIO_FN(RDWR), + GPIO_FN(RD_FSC), /* share with FLCTL */ + GPIO_FN(WAIT_PORT177), /* WAIT Port 90/177 */ + GPIO_FN(WAIT_PORT90), + + GPIO_FN(FCE0), GPIO_FN(FCE1), GPIO_FN(FRB), /* FLCTL */ + + /* IRDA */ + GPIO_FN(IRDA_FIRSEL), GPIO_FN(IRDA_IN), GPIO_FN(IRDA_OUT), + + /* ATAPI */ + GPIO_FN(IDE_D0), GPIO_FN(IDE_D1), GPIO_FN(IDE_D2), + GPIO_FN(IDE_D3), GPIO_FN(IDE_D4), GPIO_FN(IDE_D5), + GPIO_FN(IDE_D6), GPIO_FN(IDE_D7), GPIO_FN(IDE_D8), + GPIO_FN(IDE_D9), GPIO_FN(IDE_D10), GPIO_FN(IDE_D11), + GPIO_FN(IDE_D12), GPIO_FN(IDE_D13), GPIO_FN(IDE_D14), + GPIO_FN(IDE_D15), GPIO_FN(IDE_A0), GPIO_FN(IDE_A1), + GPIO_FN(IDE_A2), GPIO_FN(IDE_CS0), GPIO_FN(IDE_CS1), + GPIO_FN(IDE_IOWR), GPIO_FN(IDE_IORD), GPIO_FN(IDE_IORDY), + GPIO_FN(IDE_INT), GPIO_FN(IDE_RST), GPIO_FN(IDE_DIRECTION), + GPIO_FN(IDE_EXBUF_ENB), GPIO_FN(IDE_IODACK), GPIO_FN(IDE_IODREQ), + + /* RMII */ + GPIO_FN(RMII_CRS_DV), GPIO_FN(RMII_RX_ER), GPIO_FN(RMII_RXD0), + GPIO_FN(RMII_RXD1), GPIO_FN(RMII_TX_EN), GPIO_FN(RMII_TXD0), + GPIO_FN(RMII_MDC), GPIO_FN(RMII_TXD1), GPIO_FN(RMII_MDIO), + GPIO_FN(RMII_REF50CK), GPIO_FN(RMII_REF125CK), /* for GMII */ + + /* GEther */ + GPIO_FN(ET_TX_CLK), GPIO_FN(ET_TX_EN), GPIO_FN(ET_ETXD0), + GPIO_FN(ET_ETXD1), GPIO_FN(ET_ETXD2), GPIO_FN(ET_ETXD3), + GPIO_FN(ET_ETXD4), GPIO_FN(ET_ETXD5), /* for GEther */ + GPIO_FN(ET_ETXD6), GPIO_FN(ET_ETXD7), /* for GEther */ + GPIO_FN(ET_COL), GPIO_FN(ET_TX_ER), GPIO_FN(ET_RX_CLK), + GPIO_FN(ET_RX_DV), GPIO_FN(ET_ERXD0), GPIO_FN(ET_ERXD1), + GPIO_FN(ET_ERXD2), GPIO_FN(ET_ERXD3), + GPIO_FN(ET_ERXD4), GPIO_FN(ET_ERXD5), /* for GEther */ + GPIO_FN(ET_ERXD6), GPIO_FN(ET_ERXD7), /* for GEther */ + GPIO_FN(ET_RX_ER), GPIO_FN(ET_CRS), GPIO_FN(ET_MDC), + GPIO_FN(ET_MDIO), GPIO_FN(ET_LINK), GPIO_FN(ET_PHY_INT), + GPIO_FN(ET_WOL), GPIO_FN(ET_GTX_CLK), + + /* DMA0 */ + GPIO_FN(DREQ0), GPIO_FN(DACK0), + + /* DMA1 */ + GPIO_FN(DREQ1), GPIO_FN(DACK1), + + /* SYSC */ + GPIO_FN(RESETOUTS), + + /* IRREM */ + GPIO_FN(IROUT), + + /* LCDC */ + GPIO_FN(LCDC0_SELECT), + GPIO_FN(LCDC1_SELECT), + + /* SDENC */ + GPIO_FN(SDENC_CPG), + GPIO_FN(SDENC_DV_CLKI), + + /* SYSC */ + GPIO_FN(RESETP_PULLUP), + GPIO_FN(RESETP_PLAIN), + + /* DEBUG */ + GPIO_FN(EDEBGREQ_PULLDOWN), + GPIO_FN(EDEBGREQ_PULLUP), + + GPIO_FN(TRACEAUD_FROM_VIO), + GPIO_FN(TRACEAUD_FROM_LCDC0), + GPIO_FN(TRACEAUD_FROM_MEMC), +}; + +static struct pinmux_cfg_reg pinmux_config_regs[] = { + PORTCR(0, 0xe6050000), /* PORT0CR */ + PORTCR(1, 0xe6050001), /* PORT1CR */ + PORTCR(2, 0xe6050002), /* PORT2CR */ + PORTCR(3, 0xe6050003), /* PORT3CR */ + PORTCR(4, 0xe6050004), /* PORT4CR */ + PORTCR(5, 0xe6050005), /* PORT5CR */ + PORTCR(6, 0xe6050006), /* PORT6CR */ + PORTCR(7, 0xe6050007), /* PORT7CR */ + PORTCR(8, 0xe6050008), /* PORT8CR */ + PORTCR(9, 0xe6050009), /* PORT9CR */ + PORTCR(10, 0xe605000a), /* PORT10CR */ + PORTCR(11, 0xe605000b), /* PORT11CR */ + PORTCR(12, 0xe605000c), /* PORT12CR */ + PORTCR(13, 0xe605000d), /* PORT13CR */ + PORTCR(14, 0xe605000e), /* PORT14CR */ + PORTCR(15, 0xe605000f), /* PORT15CR */ + PORTCR(16, 0xe6050010), /* PORT16CR */ + PORTCR(17, 0xe6050011), /* PORT17CR */ + PORTCR(18, 0xe6050012), /* PORT18CR */ + PORTCR(19, 0xe6050013), /* PORT19CR */ + PORTCR(20, 0xe6050014), /* PORT20CR */ + PORTCR(21, 0xe6050015), /* PORT21CR */ + PORTCR(22, 0xe6050016), /* PORT22CR */ + PORTCR(23, 0xe6050017), /* PORT23CR */ + PORTCR(24, 0xe6050018), /* PORT24CR */ + PORTCR(25, 0xe6050019), /* PORT25CR */ + PORTCR(26, 0xe605001a), /* PORT26CR */ + PORTCR(27, 0xe605001b), /* PORT27CR */ + PORTCR(28, 0xe605001c), /* PORT28CR */ + PORTCR(29, 0xe605001d), /* PORT29CR */ + PORTCR(30, 0xe605001e), /* PORT30CR */ + PORTCR(31, 0xe605001f), /* PORT31CR */ + PORTCR(32, 0xe6050020), /* PORT32CR */ + PORTCR(33, 0xe6050021), /* PORT33CR */ + PORTCR(34, 0xe6050022), /* PORT34CR */ + PORTCR(35, 0xe6050023), /* PORT35CR */ + PORTCR(36, 0xe6050024), /* PORT36CR */ + PORTCR(37, 0xe6050025), /* PORT37CR */ + PORTCR(38, 0xe6050026), /* PORT38CR */ + PORTCR(39, 0xe6050027), /* PORT39CR */ + PORTCR(40, 0xe6050028), /* PORT40CR */ + PORTCR(41, 0xe6050029), /* PORT41CR */ + PORTCR(42, 0xe605002a), /* PORT42CR */ + PORTCR(43, 0xe605002b), /* PORT43CR */ + PORTCR(44, 0xe605002c), /* PORT44CR */ + PORTCR(45, 0xe605002d), /* PORT45CR */ + PORTCR(46, 0xe605002e), /* PORT46CR */ + PORTCR(47, 0xe605002f), /* PORT47CR */ + PORTCR(48, 0xe6050030), /* PORT48CR */ + PORTCR(49, 0xe6050031), /* PORT49CR */ + PORTCR(50, 0xe6050032), /* PORT50CR */ + PORTCR(51, 0xe6050033), /* PORT51CR */ + PORTCR(52, 0xe6050034), /* PORT52CR */ + PORTCR(53, 0xe6050035), /* PORT53CR */ + PORTCR(54, 0xe6050036), /* PORT54CR */ + PORTCR(55, 0xe6050037), /* PORT55CR */ + PORTCR(56, 0xe6050038), /* PORT56CR */ + PORTCR(57, 0xe6050039), /* PORT57CR */ + PORTCR(58, 0xe605003a), /* PORT58CR */ + PORTCR(59, 0xe605003b), /* PORT59CR */ + PORTCR(60, 0xe605003c), /* PORT60CR */ + PORTCR(61, 0xe605003d), /* PORT61CR */ + PORTCR(62, 0xe605003e), /* PORT62CR */ + PORTCR(63, 0xe605003f), /* PORT63CR */ + PORTCR(64, 0xe6050040), /* PORT64CR */ + PORTCR(65, 0xe6050041), /* PORT65CR */ + PORTCR(66, 0xe6050042), /* PORT66CR */ + PORTCR(67, 0xe6050043), /* PORT67CR */ + PORTCR(68, 0xe6050044), /* PORT68CR */ + PORTCR(69, 0xe6050045), /* PORT69CR */ + PORTCR(70, 0xe6050046), /* PORT70CR */ + PORTCR(71, 0xe6050047), /* PORT71CR */ + PORTCR(72, 0xe6050048), /* PORT72CR */ + PORTCR(73, 0xe6050049), /* PORT73CR */ + PORTCR(74, 0xe605004a), /* PORT74CR */ + PORTCR(75, 0xe605004b), /* PORT75CR */ + PORTCR(76, 0xe605004c), /* PORT76CR */ + PORTCR(77, 0xe605004d), /* PORT77CR */ + PORTCR(78, 0xe605004e), /* PORT78CR */ + PORTCR(79, 0xe605004f), /* PORT79CR */ + PORTCR(80, 0xe6050050), /* PORT80CR */ + PORTCR(81, 0xe6050051), /* PORT81CR */ + PORTCR(82, 0xe6050052), /* PORT82CR */ + PORTCR(83, 0xe6050053), /* PORT83CR */ + + PORTCR(84, 0xe6051054), /* PORT84CR */ + PORTCR(85, 0xe6051055), /* PORT85CR */ + PORTCR(86, 0xe6051056), /* PORT86CR */ + PORTCR(87, 0xe6051057), /* PORT87CR */ + PORTCR(88, 0xe6051058), /* PORT88CR */ + PORTCR(89, 0xe6051059), /* PORT89CR */ + PORTCR(90, 0xe605105a), /* PORT90CR */ + PORTCR(91, 0xe605105b), /* PORT91CR */ + PORTCR(92, 0xe605105c), /* PORT92CR */ + PORTCR(93, 0xe605105d), /* PORT93CR */ + PORTCR(94, 0xe605105e), /* PORT94CR */ + PORTCR(95, 0xe605105f), /* PORT95CR */ + PORTCR(96, 0xe6051060), /* PORT96CR */ + PORTCR(97, 0xe6051061), /* PORT97CR */ + PORTCR(98, 0xe6051062), /* PORT98CR */ + PORTCR(99, 0xe6051063), /* PORT99CR */ + PORTCR(100, 0xe6051064), /* PORT100CR */ + PORTCR(101, 0xe6051065), /* PORT101CR */ + PORTCR(102, 0xe6051066), /* PORT102CR */ + PORTCR(103, 0xe6051067), /* PORT103CR */ + PORTCR(104, 0xe6051068), /* PORT104CR */ + PORTCR(105, 0xe6051069), /* PORT105CR */ + PORTCR(106, 0xe605106a), /* PORT106CR */ + PORTCR(107, 0xe605106b), /* PORT107CR */ + PORTCR(108, 0xe605106c), /* PORT108CR */ + PORTCR(109, 0xe605106d), /* PORT109CR */ + PORTCR(110, 0xe605106e), /* PORT110CR */ + PORTCR(111, 0xe605106f), /* PORT111CR */ + PORTCR(112, 0xe6051070), /* PORT112CR */ + PORTCR(113, 0xe6051071), /* PORT113CR */ + PORTCR(114, 0xe6051072), /* PORT114CR */ + + PORTCR(115, 0xe6052073), /* PORT115CR */ + PORTCR(116, 0xe6052074), /* PORT116CR */ + PORTCR(117, 0xe6052075), /* PORT117CR */ + PORTCR(118, 0xe6052076), /* PORT118CR */ + PORTCR(119, 0xe6052077), /* PORT119CR */ + PORTCR(120, 0xe6052078), /* PORT120CR */ + PORTCR(121, 0xe6052079), /* PORT121CR */ + PORTCR(122, 0xe605207a), /* PORT122CR */ + PORTCR(123, 0xe605207b), /* PORT123CR */ + PORTCR(124, 0xe605207c), /* PORT124CR */ + PORTCR(125, 0xe605207d), /* PORT125CR */ + PORTCR(126, 0xe605207e), /* PORT126CR */ + PORTCR(127, 0xe605207f), /* PORT127CR */ + PORTCR(128, 0xe6052080), /* PORT128CR */ + PORTCR(129, 0xe6052081), /* PORT129CR */ + PORTCR(130, 0xe6052082), /* PORT130CR */ + PORTCR(131, 0xe6052083), /* PORT131CR */ + PORTCR(132, 0xe6052084), /* PORT132CR */ + PORTCR(133, 0xe6052085), /* PORT133CR */ + PORTCR(134, 0xe6052086), /* PORT134CR */ + PORTCR(135, 0xe6052087), /* PORT135CR */ + PORTCR(136, 0xe6052088), /* PORT136CR */ + PORTCR(137, 0xe6052089), /* PORT137CR */ + PORTCR(138, 0xe605208a), /* PORT138CR */ + PORTCR(139, 0xe605208b), /* PORT139CR */ + PORTCR(140, 0xe605208c), /* PORT140CR */ + PORTCR(141, 0xe605208d), /* PORT141CR */ + PORTCR(142, 0xe605208e), /* PORT142CR */ + PORTCR(143, 0xe605208f), /* PORT143CR */ + PORTCR(144, 0xe6052090), /* PORT144CR */ + PORTCR(145, 0xe6052091), /* PORT145CR */ + PORTCR(146, 0xe6052092), /* PORT146CR */ + PORTCR(147, 0xe6052093), /* PORT147CR */ + PORTCR(148, 0xe6052094), /* PORT148CR */ + PORTCR(149, 0xe6052095), /* PORT149CR */ + PORTCR(150, 0xe6052096), /* PORT150CR */ + PORTCR(151, 0xe6052097), /* PORT151CR */ + PORTCR(152, 0xe6052098), /* PORT152CR */ + PORTCR(153, 0xe6052099), /* PORT153CR */ + PORTCR(154, 0xe605209a), /* PORT154CR */ + PORTCR(155, 0xe605209b), /* PORT155CR */ + PORTCR(156, 0xe605209c), /* PORT156CR */ + PORTCR(157, 0xe605209d), /* PORT157CR */ + PORTCR(158, 0xe605209e), /* PORT158CR */ + PORTCR(159, 0xe605209f), /* PORT159CR */ + PORTCR(160, 0xe60520a0), /* PORT160CR */ + PORTCR(161, 0xe60520a1), /* PORT161CR */ + PORTCR(162, 0xe60520a2), /* PORT162CR */ + PORTCR(163, 0xe60520a3), /* PORT163CR */ + PORTCR(164, 0xe60520a4), /* PORT164CR */ + PORTCR(165, 0xe60520a5), /* PORT165CR */ + PORTCR(166, 0xe60520a6), /* PORT166CR */ + PORTCR(167, 0xe60520a7), /* PORT167CR */ + PORTCR(168, 0xe60520a8), /* PORT168CR */ + PORTCR(169, 0xe60520a9), /* PORT169CR */ + PORTCR(170, 0xe60520aa), /* PORT170CR */ + PORTCR(171, 0xe60520ab), /* PORT171CR */ + PORTCR(172, 0xe60520ac), /* PORT172CR */ + PORTCR(173, 0xe60520ad), /* PORT173CR */ + PORTCR(174, 0xe60520ae), /* PORT174CR */ + PORTCR(175, 0xe60520af), /* PORT175CR */ + PORTCR(176, 0xe60520b0), /* PORT176CR */ + PORTCR(177, 0xe60520b1), /* PORT177CR */ + PORTCR(178, 0xe60520b2), /* PORT178CR */ + PORTCR(179, 0xe60520b3), /* PORT179CR */ + PORTCR(180, 0xe60520b4), /* PORT180CR */ + PORTCR(181, 0xe60520b5), /* PORT181CR */ + PORTCR(182, 0xe60520b6), /* PORT182CR */ + PORTCR(183, 0xe60520b7), /* PORT183CR */ + PORTCR(184, 0xe60520b8), /* PORT184CR */ + PORTCR(185, 0xe60520b9), /* PORT185CR */ + PORTCR(186, 0xe60520ba), /* PORT186CR */ + PORTCR(187, 0xe60520bb), /* PORT187CR */ + PORTCR(188, 0xe60520bc), /* PORT188CR */ + PORTCR(189, 0xe60520bd), /* PORT189CR */ + PORTCR(190, 0xe60520be), /* PORT190CR */ + PORTCR(191, 0xe60520bf), /* PORT191CR */ + PORTCR(192, 0xe60520c0), /* PORT192CR */ + PORTCR(193, 0xe60520c1), /* PORT193CR */ + PORTCR(194, 0xe60520c2), /* PORT194CR */ + PORTCR(195, 0xe60520c3), /* PORT195CR */ + PORTCR(196, 0xe60520c4), /* PORT196CR */ + PORTCR(197, 0xe60520c5), /* PORT197CR */ + PORTCR(198, 0xe60520c6), /* PORT198CR */ + PORTCR(199, 0xe60520c7), /* PORT199CR */ + PORTCR(200, 0xe60520c8), /* PORT200CR */ + PORTCR(201, 0xe60520c9), /* PORT201CR */ + PORTCR(202, 0xe60520ca), /* PORT202CR */ + PORTCR(203, 0xe60520cb), /* PORT203CR */ + PORTCR(204, 0xe60520cc), /* PORT204CR */ + PORTCR(205, 0xe60520cd), /* PORT205CR */ + PORTCR(206, 0xe60520ce), /* PORT206CR */ + PORTCR(207, 0xe60520cf), /* PORT207CR */ + PORTCR(208, 0xe60520d0), /* PORT208CR */ + PORTCR(209, 0xe60520d1), /* PORT209CR */ + + PORTCR(210, 0xe60530d2), /* PORT210CR */ + PORTCR(211, 0xe60530d3), /* PORT211CR */ + + { PINMUX_CFG_REG("MSEL1CR", 0xe605800c, 32, 1) { + MSEL1CR_31_0, MSEL1CR_31_1, + MSEL1CR_30_0, MSEL1CR_30_1, + MSEL1CR_29_0, MSEL1CR_29_1, + MSEL1CR_28_0, MSEL1CR_28_1, + MSEL1CR_27_0, MSEL1CR_27_1, + MSEL1CR_26_0, MSEL1CR_26_1, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + MSEL1CR_16_0, MSEL1CR_16_1, + MSEL1CR_15_0, MSEL1CR_15_1, + MSEL1CR_14_0, MSEL1CR_14_1, + MSEL1CR_13_0, MSEL1CR_13_1, + MSEL1CR_12_0, MSEL1CR_12_1, + 0, 0, 0, 0, + MSEL1CR_9_0, MSEL1CR_9_1, + 0, 0, + MSEL1CR_7_0, MSEL1CR_7_1, + MSEL1CR_6_0, MSEL1CR_6_1, + MSEL1CR_5_0, MSEL1CR_5_1, + MSEL1CR_4_0, MSEL1CR_4_1, + MSEL1CR_3_0, MSEL1CR_3_1, + MSEL1CR_2_0, MSEL1CR_2_1, + 0, 0, + MSEL1CR_0_0, MSEL1CR_0_1, + } + }, + { PINMUX_CFG_REG("MSEL3CR", 0xE6058020, 32, 1) { + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + MSEL3CR_15_0, MSEL3CR_15_1, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + MSEL3CR_6_0, MSEL3CR_6_1, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, + } + }, + { PINMUX_CFG_REG("MSEL4CR", 0xE6058024, 32, 1) { + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, + MSEL4CR_19_0, MSEL4CR_19_1, + MSEL4CR_18_0, MSEL4CR_18_1, + 0, 0, 0, 0, + MSEL4CR_15_0, MSEL4CR_15_1, + 0, 0, 0, 0, 0, 0, 0, 0, + MSEL4CR_10_0, MSEL4CR_10_1, + 0, 0, 0, 0, 0, 0, + MSEL4CR_6_0, MSEL4CR_6_1, + 0, 0, + MSEL4CR_4_0, MSEL4CR_4_1, + 0, 0, 0, 0, + MSEL4CR_1_0, MSEL4CR_1_1, + 0, 0, + } + }, + { PINMUX_CFG_REG("MSEL5CR", 0xE6058028, 32, 1) { + MSEL5CR_31_0, MSEL5CR_31_1, + MSEL5CR_30_0, MSEL5CR_30_1, + MSEL5CR_29_0, MSEL5CR_29_1, + 0, 0, + MSEL5CR_27_0, MSEL5CR_27_1, + 0, 0, + MSEL5CR_25_0, MSEL5CR_25_1, + 0, 0, + MSEL5CR_23_0, MSEL5CR_23_1, + 0, 0, + MSEL5CR_21_0, MSEL5CR_21_1, + 0, 0, + MSEL5CR_19_0, MSEL5CR_19_1, + 0, 0, + MSEL5CR_17_0, MSEL5CR_17_1, + 0, 0, + MSEL5CR_15_0, MSEL5CR_15_1, + MSEL5CR_14_0, MSEL5CR_14_1, + MSEL5CR_13_0, MSEL5CR_13_1, + MSEL5CR_12_0, MSEL5CR_12_1, + MSEL5CR_11_0, MSEL5CR_11_1, + MSEL5CR_10_0, MSEL5CR_10_1, + 0, 0, + MSEL5CR_8_0, MSEL5CR_8_1, + MSEL5CR_7_0, MSEL5CR_7_1, + MSEL5CR_6_0, MSEL5CR_6_1, + MSEL5CR_5_0, MSEL5CR_5_1, + MSEL5CR_4_0, MSEL5CR_4_1, + MSEL5CR_3_0, MSEL5CR_3_1, + MSEL5CR_2_0, MSEL5CR_2_1, + 0, 0, + MSEL5CR_0_0, MSEL5CR_0_1, + } + }, + { }, +}; + +static struct pinmux_data_reg pinmux_data_regs[] = { + { PINMUX_DATA_REG("PORTL031_000DR", 0xe6054800, 32) { + PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA, + PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA, + PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA, + PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA, + PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA, + PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA, + PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA, + PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA } + }, + { PINMUX_DATA_REG("PORTL063_032DR", 0xe6054804, 32) { + PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA, + PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA, + PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA, + PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA, + PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA, + PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA, + PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA, + PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA } + }, + { PINMUX_DATA_REG("PORTL095_064DR", 0xe6054808, 32) { + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA, + PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA, + PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA, + PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA, + PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA } + }, + { PINMUX_DATA_REG("PORTD095_064DR", 0xe6055808, 32) { + PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA, + PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA, + PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0 } + }, + { PINMUX_DATA_REG("PORTD127_096DR", 0xe605580c, 32) { + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, PORT114_DATA, PORT113_DATA, PORT112_DATA, + PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA, + PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA, + PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA, + PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA } + }, + { PINMUX_DATA_REG("PORTR127_096DR", 0xe605680C, 32) { + PORT127_DATA, PORT126_DATA, PORT125_DATA, PORT124_DATA, + PORT123_DATA, PORT122_DATA, PORT121_DATA, PORT120_DATA, + PORT119_DATA, PORT118_DATA, PORT117_DATA, PORT116_DATA, + PORT115_DATA, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0 } + }, + { PINMUX_DATA_REG("PORTR159_128DR", 0xe6056810, 32) { + PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA, + PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA, + PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA, + PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA, + PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA, + PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA, + PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA, + PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA } + }, + { PINMUX_DATA_REG("PORTR191_160DR", 0xe6056814, 32) { + PORT191_DATA, PORT190_DATA, PORT189_DATA, PORT188_DATA, + PORT187_DATA, PORT186_DATA, PORT185_DATA, PORT184_DATA, + PORT183_DATA, PORT182_DATA, PORT181_DATA, PORT180_DATA, + PORT179_DATA, PORT178_DATA, PORT177_DATA, PORT176_DATA, + PORT175_DATA, PORT174_DATA, PORT173_DATA, PORT172_DATA, + PORT171_DATA, PORT170_DATA, PORT169_DATA, PORT168_DATA, + PORT167_DATA, PORT166_DATA, PORT165_DATA, PORT164_DATA, + PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA } + }, + { PINMUX_DATA_REG("PORTR223_192DR", 0xe6056818, 32) { + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, PORT209_DATA, PORT208_DATA, + PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA, + PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA, + PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA, + PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA } + }, + { PINMUX_DATA_REG("PORTU223_192DR", 0xe6057818, 32) { + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + PORT211_DATA, PORT210_DATA, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0 } + }, + { }, +}; + +static struct pinmux_irq pinmux_irqs[] = { + PINMUX_IRQ(evt2irq(0x0200), PORT2_FN0, PORT13_FN0), /* IRQ0A */ + PINMUX_IRQ(evt2irq(0x0220), PORT20_FN0), /* IRQ1A */ + PINMUX_IRQ(evt2irq(0x0240), PORT11_FN0, PORT12_FN0), /* IRQ2A */ + PINMUX_IRQ(evt2irq(0x0260), PORT10_FN0, PORT14_FN0), /* IRQ3A */ + PINMUX_IRQ(evt2irq(0x0280), PORT15_FN0, PORT172_FN0), /* IRQ4A */ + PINMUX_IRQ(evt2irq(0x02A0), PORT0_FN0, PORT1_FN0), /* IRQ5A */ + PINMUX_IRQ(evt2irq(0x02C0), PORT121_FN0, PORT173_FN0), /* IRQ6A */ + PINMUX_IRQ(evt2irq(0x02E0), PORT120_FN0, PORT209_FN0), /* IRQ7A */ + PINMUX_IRQ(evt2irq(0x0300), PORT119_FN0), /* IRQ8A */ + PINMUX_IRQ(evt2irq(0x0320), PORT118_FN0, PORT210_FN0), /* IRQ9A */ + PINMUX_IRQ(evt2irq(0x0340), PORT19_FN0), /* IRQ10A */ + PINMUX_IRQ(evt2irq(0x0360), PORT104_FN0), /* IRQ11A */ + PINMUX_IRQ(evt2irq(0x0380), PORT42_FN0, PORT97_FN0), /* IRQ12A */ + PINMUX_IRQ(evt2irq(0x03A0), PORT64_FN0, PORT98_FN0), /* IRQ13A */ + PINMUX_IRQ(evt2irq(0x03C0), PORT63_FN0, PORT99_FN0), /* IRQ14A */ + PINMUX_IRQ(evt2irq(0x03E0), PORT62_FN0, PORT100_FN0), /* IRQ15A */ + PINMUX_IRQ(evt2irq(0x3200), PORT68_FN0, PORT211_FN0), /* IRQ16A */ + PINMUX_IRQ(evt2irq(0x3220), PORT69_FN0), /* IRQ17A */ + PINMUX_IRQ(evt2irq(0x3240), PORT70_FN0), /* IRQ18A */ + PINMUX_IRQ(evt2irq(0x3260), PORT71_FN0), /* IRQ19A */ + PINMUX_IRQ(evt2irq(0x3280), PORT67_FN0), /* IRQ20A */ + PINMUX_IRQ(evt2irq(0x32A0), PORT202_FN0), /* IRQ21A */ + PINMUX_IRQ(evt2irq(0x32C0), PORT95_FN0), /* IRQ22A */ + PINMUX_IRQ(evt2irq(0x32E0), PORT96_FN0), /* IRQ23A */ + PINMUX_IRQ(evt2irq(0x3300), PORT180_FN0), /* IRQ24A */ + PINMUX_IRQ(evt2irq(0x3320), PORT38_FN0), /* IRQ25A */ + PINMUX_IRQ(evt2irq(0x3340), PORT58_FN0, PORT81_FN0), /* IRQ26A */ + PINMUX_IRQ(evt2irq(0x3360), PORT57_FN0, PORT168_FN0), /* IRQ27A */ + PINMUX_IRQ(evt2irq(0x3380), PORT56_FN0, PORT169_FN0), /* IRQ28A */ + PINMUX_IRQ(evt2irq(0x33A0), PORT50_FN0, PORT170_FN0), /* IRQ29A */ + PINMUX_IRQ(evt2irq(0x33C0), PORT49_FN0, PORT171_FN0), /* IRQ30A */ + PINMUX_IRQ(evt2irq(0x33E0), PORT41_FN0, PORT167_FN0), /* IRQ31A */ +}; + +static struct pinmux_info r8a7740_pinmux_info = { + .name = "r8a7740_pfc", + .reserved_id = PINMUX_RESERVED, + .data = { PINMUX_DATA_BEGIN, + PINMUX_DATA_END }, + .input = { PINMUX_INPUT_BEGIN, + PINMUX_INPUT_END }, + .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, + PINMUX_INPUT_PULLUP_END }, + .input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, + PINMUX_INPUT_PULLDOWN_END }, + .output = { PINMUX_OUTPUT_BEGIN, + PINMUX_OUTPUT_END }, + .mark = { PINMUX_MARK_BEGIN, + PINMUX_MARK_END }, + .function = { PINMUX_FUNCTION_BEGIN, + PINMUX_FUNCTION_END }, + + .first_gpio = GPIO_PORT0, + .last_gpio = GPIO_FN_TRACEAUD_FROM_MEMC, + + .gpios = pinmux_gpios, + .cfg_regs = pinmux_config_regs, + .data_regs = pinmux_data_regs, + + .gpio_data = pinmux_data, + .gpio_data_size = ARRAY_SIZE(pinmux_data), + + .gpio_irq = pinmux_irqs, + .gpio_irq_size = ARRAY_SIZE(pinmux_irqs), +}; + +void r8a7740_pinmux_init(void) +{ + register_pinmux(&r8a7740_pinmux_info); +} diff --git a/arch/arm/cpu/armv7/rmobile/pfc-sh73a0.c b/arch/arm/cpu/armv7/rmobile/pfc-sh73a0.c new file mode 100644 index 0000000..55dab7c --- /dev/null +++ b/arch/arm/cpu/armv7/rmobile/pfc-sh73a0.c @@ -0,0 +1,2807 @@ +/* + * sh73a0 processor support - PFC hardware block + * + * Copyright (C) 2010 Renesas Solutions Corp. + * Copyright (C) 2010 NISHIMOTO Hiroki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the + * License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <common.h> +#include <sh_pfc.h> +#include <asm/arch/sh73a0-gpio.h> + +#define CPU_ALL_PORT(fn, pfx, sfx) \ + PORT_10(fn, pfx, sfx), PORT_10(fn, pfx##1, sfx), \ + PORT_10(fn, pfx##2, sfx), PORT_10(fn, pfx##3, sfx), \ + PORT_10(fn, pfx##4, sfx), PORT_10(fn, pfx##5, sfx), \ + PORT_10(fn, pfx##6, sfx), PORT_10(fn, pfx##7, sfx), \ + PORT_10(fn, pfx##8, sfx), PORT_10(fn, pfx##9, sfx), \ + PORT_10(fn, pfx##10, sfx), \ + PORT_1(fn, pfx##110, sfx), PORT_1(fn, pfx##111, sfx), \ + PORT_1(fn, pfx##112, sfx), PORT_1(fn, pfx##113, sfx), \ + PORT_1(fn, pfx##114, sfx), PORT_1(fn, pfx##115, sfx), \ + PORT_1(fn, pfx##116, sfx), PORT_1(fn, pfx##117, sfx), \ + PORT_1(fn, pfx##118, sfx), \ + PORT_1(fn, pfx##128, sfx), PORT_1(fn, pfx##129, sfx), \ + PORT_10(fn, pfx##13, sfx), PORT_10(fn, pfx##14, sfx), \ + PORT_10(fn, pfx##15, sfx), \ + PORT_1(fn, pfx##160, sfx), PORT_1(fn, pfx##161, sfx), \ + PORT_1(fn, pfx##162, sfx), PORT_1(fn, pfx##163, sfx), \ + PORT_1(fn, pfx##164, sfx), \ + PORT_1(fn, pfx##192, sfx), PORT_1(fn, pfx##193, sfx), \ + PORT_1(fn, pfx##194, sfx), PORT_1(fn, pfx##195, sfx), \ + PORT_1(fn, pfx##196, sfx), PORT_1(fn, pfx##197, sfx), \ + PORT_1(fn, pfx##198, sfx), PORT_1(fn, pfx##199, sfx), \ + PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx), \ + PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx), \ + PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx), \ + PORT_10(fn, pfx##26, sfx), PORT_10(fn, pfx##27, sfx), \ + PORT_1(fn, pfx##280, sfx), PORT_1(fn, pfx##281, sfx), \ + PORT_1(fn, pfx##282, sfx), \ + PORT_1(fn, pfx##288, sfx), PORT_1(fn, pfx##289, sfx), \ + PORT_10(fn, pfx##29, sfx), PORT_10(fn, pfx##30, sfx) + +enum { + PINMUX_RESERVED = 0, + + PINMUX_DATA_BEGIN, + PORT_ALL(DATA), /* PORT0_DATA -> PORT309_DATA */ + PINMUX_DATA_END, + + PINMUX_INPUT_BEGIN, + PORT_ALL(IN), /* PORT0_IN -> PORT309_IN */ + PINMUX_INPUT_END, + + PINMUX_INPUT_PULLUP_BEGIN, + PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT309_IN_PU */ + PINMUX_INPUT_PULLUP_END, + + PINMUX_INPUT_PULLDOWN_BEGIN, + PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT309_IN_PD */ + PINMUX_INPUT_PULLDOWN_END, + + PINMUX_OUTPUT_BEGIN, + PORT_ALL(OUT), /* PORT0_OUT -> PORT309_OUT */ + PINMUX_OUTPUT_END, + + PINMUX_FUNCTION_BEGIN, + PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT309_FN_IN */ + PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT309_FN_OUT */ + PORT_ALL(FN0), /* PORT0_FN0 -> PORT309_FN0 */ + PORT_ALL(FN1), /* PORT0_FN1 -> PORT309_FN1 */ + PORT_ALL(FN2), /* PORT0_FN2 -> PORT309_FN2 */ + PORT_ALL(FN3), /* PORT0_FN3 -> PORT309_FN3 */ + PORT_ALL(FN4), /* PORT0_FN4 -> PORT309_FN4 */ + PORT_ALL(FN5), /* PORT0_FN5 -> PORT309_FN5 */ + PORT_ALL(FN6), /* PORT0_FN6 -> PORT309_FN6 */ + PORT_ALL(FN7), /* PORT0_FN7 -> PORT309_FN7 */ + + MSEL2CR_MSEL19_0, MSEL2CR_MSEL19_1, + MSEL2CR_MSEL18_0, MSEL2CR_MSEL18_1, + MSEL2CR_MSEL17_0, MSEL2CR_MSEL17_1, + MSEL2CR_MSEL16_0, MSEL2CR_MSEL16_1, + MSEL2CR_MSEL14_0, MSEL2CR_MSEL14_1, + MSEL2CR_MSEL13_0, MSEL2CR_MSEL13_1, + MSEL2CR_MSEL12_0, MSEL2CR_MSEL12_1, + MSEL2CR_MSEL11_0, MSEL2CR_MSEL11_1, + MSEL2CR_MSEL10_0, MSEL2CR_MSEL10_1, + MSEL2CR_MSEL9_0, MSEL2CR_MSEL9_1, + MSEL2CR_MSEL8_0, MSEL2CR_MSEL8_1, + MSEL2CR_MSEL7_0, MSEL2CR_MSEL7_1, + MSEL2CR_MSEL6_0, MSEL2CR_MSEL6_1, + MSEL2CR_MSEL4_0, MSEL2CR_MSEL4_1, + MSEL2CR_MSEL5_0, MSEL2CR_MSEL5_1, + MSEL2CR_MSEL3_0, MSEL2CR_MSEL3_1, + MSEL2CR_MSEL2_0, MSEL2CR_MSEL2_1, + MSEL2CR_MSEL1_0, MSEL2CR_MSEL1_1, + MSEL2CR_MSEL0_0, MSEL2CR_MSEL0_1, + MSEL3CR_MSEL28_0, MSEL3CR_MSEL28_1, + MSEL3CR_MSEL15_0, MSEL3CR_MSEL15_1, + MSEL3CR_MSEL11_0, MSEL3CR_MSEL11_1, + MSEL3CR_MSEL9_0, MSEL3CR_MSEL9_1, + MSEL3CR_MSEL6_0, MSEL3CR_MSEL6_1, + MSEL3CR_MSEL2_0, MSEL3CR_MSEL2_1, + MSEL4CR_MSEL29_0, MSEL4CR_MSEL29_1, + MSEL4CR_MSEL27_0, MSEL4CR_MSEL27_1, + MSEL4CR_MSEL26_0, MSEL4CR_MSEL26_1, + MSEL4CR_MSEL22_0, MSEL4CR_MSEL22_1, + MSEL4CR_MSEL21_0, MSEL4CR_MSEL21_1, + MSEL4CR_MSEL20_0, MSEL4CR_MSEL20_1, + MSEL4CR_MSEL19_0, MSEL4CR_MSEL19_1, + MSEL4CR_MSEL15_0, MSEL4CR_MSEL15_1, + MSEL4CR_MSEL13_0, MSEL4CR_MSEL13_1, + MSEL4CR_MSEL12_0, MSEL4CR_MSEL12_1, + MSEL4CR_MSEL11_0, MSEL4CR_MSEL11_1, + MSEL4CR_MSEL10_0, MSEL4CR_MSEL10_1, + MSEL4CR_MSEL9_0, MSEL4CR_MSEL9_1, + MSEL4CR_MSEL8_0, MSEL4CR_MSEL8_1, + MSEL4CR_MSEL7_0, MSEL4CR_MSEL7_1, + MSEL4CR_MSEL4_0, MSEL4CR_MSEL4_1, + MSEL4CR_MSEL1_0, MSEL4CR_MSEL1_1, + PINMUX_FUNCTION_END, + + PINMUX_MARK_BEGIN, + /* Hardware manual Table 25-1 (Function 0-7) */ + VBUS_0_MARK, + GPI0_MARK, + GPI1_MARK, + GPI2_MARK, + GPI3_MARK, + GPI4_MARK, + GPI5_MARK, + GPI6_MARK, + GPI7_MARK, + SCIFA7_RXD_MARK, + SCIFA7_CTS__MARK, + GPO7_MARK, MFG0_OUT2_MARK, + GPO6_MARK, MFG1_OUT2_MARK, + GPO5_MARK, SCIFA0_SCK_MARK, FSICOSLDT3_MARK, PORT16_VIO_CKOR_MARK, + SCIFA0_TXD_MARK, + SCIFA7_TXD_MARK, + SCIFA7_RTS__MARK, PORT19_VIO_CKO2_MARK, + GPO0_MARK, + GPO1_MARK, + GPO2_MARK, STATUS0_MARK, + GPO3_MARK, STATUS1_MARK, + GPO4_MARK, STATUS2_MARK, + VINT_MARK, + TCKON_MARK, + XDVFS1_MARK, PORT27_I2C_SCL2_MARK, PORT27_I2C_SCL3_MARK, \ + MFG0_OUT1_MARK, PORT27_IROUT_MARK, + XDVFS2_MARK, PORT28_I2C_SDA2_MARK, PORT28_I2C_SDA3_MARK, \ + PORT28_TPU1TO1_MARK, + SIM_RST_MARK, PORT29_TPU1TO1_MARK, + SIM_CLK_MARK, PORT30_VIO_CKOR_MARK, + SIM_D_MARK, PORT31_IROUT_MARK, + SCIFA4_TXD_MARK, + SCIFA4_RXD_MARK, XWUP_MARK, + SCIFA4_RTS__MARK, + SCIFA4_CTS__MARK, + FSIBOBT_MARK, FSIBIBT_MARK, + FSIBOLR_MARK, FSIBILR_MARK, + FSIBOSLD_MARK, + FSIBISLD_MARK, + VACK_MARK, + XTAL1L_MARK, + SCIFA0_RTS__MARK, FSICOSLDT2_MARK, + SCIFA0_RXD_MARK, + SCIFA0_CTS__MARK, FSICOSLDT1_MARK, + FSICOBT_MARK, FSICIBT_MARK, FSIDOBT_MARK, FSIDIBT_MARK, + FSICOLR_MARK, FSICILR_MARK, FSIDOLR_MARK, FSIDILR_MARK, + FSICOSLD_MARK, PORT47_FSICSPDIF_MARK, + FSICISLD_MARK, FSIDISLD_MARK, + FSIACK_MARK, PORT49_IRDA_OUT_MARK, PORT49_IROUT_MARK, FSIAOMC_MARK, + FSIAOLR_MARK, BBIF2_TSYNC2_MARK, TPU2TO2_MARK, FSIAILR_MARK, + + FSIAOBT_MARK, BBIF2_TSCK2_MARK, TPU2TO3_MARK, FSIAIBT_MARK, + FSIAOSLD_MARK, BBIF2_TXD2_MARK, + FSIASPDIF_MARK, PORT53_IRDA_IN_MARK, TPU3TO3_MARK, FSIBSPDIF_MARK, \ + PORT53_FSICSPDIF_MARK, + FSIBCK_MARK, PORT54_IRDA_FIRSEL_MARK, TPU3TO2_MARK, FSIBOMC_MARK, \ + FSICCK_MARK, FSICOMC_MARK, + FSIAISLD_MARK, TPU0TO0_MARK, + A0_MARK, BS__MARK, + A12_MARK, PORT58_KEYOUT7_MARK, TPU4TO2_MARK, + A13_MARK, PORT59_KEYOUT6_MARK, TPU0TO1_MARK, + A14_MARK, KEYOUT5_MARK, + A15_MARK, KEYOUT4_MARK, + A16_MARK, KEYOUT3_MARK, MSIOF0_SS1_MARK, + A17_MARK, KEYOUT2_MARK, MSIOF0_TSYNC_MARK, + A18_MARK, KEYOUT1_MARK, MSIOF0_TSCK_MARK, + A19_MARK, KEYOUT0_MARK, MSIOF0_TXD_MARK, + A20_MARK, KEYIN0_MARK, MSIOF0_RSCK_MARK, + A21_MARK, KEYIN1_MARK, MSIOF0_RSYNC_MARK, + A22_MARK, KEYIN2_MARK, MSIOF0_MCK0_MARK, + A23_MARK, KEYIN3_MARK, MSIOF0_MCK1_MARK, + A24_MARK, KEYIN4_MARK, MSIOF0_RXD_MARK, + A25_MARK, KEYIN5_MARK, MSIOF0_SS2_MARK, + A26_MARK, KEYIN6_MARK, + KEYIN7_MARK, + D0_NAF0_MARK, + D1_NAF1_MARK, + D2_NAF2_MARK, + D3_NAF3_MARK, + D4_NAF4_MARK, + D5_NAF5_MARK, + D6_NAF6_MARK, + D7_NAF7_MARK, + D8_NAF8_MARK, + D9_NAF9_MARK, + D10_NAF10_MARK, + D11_NAF11_MARK, + D12_NAF12_MARK, + D13_NAF13_MARK, + D14_NAF14_MARK, + D15_NAF15_MARK, + CS4__MARK, + CS5A__MARK, PORT91_RDWR_MARK, + CS5B__MARK, FCE1__MARK, + CS6B__MARK, DACK0_MARK, + FCE0__MARK, CS6A__MARK, + WAIT__MARK, DREQ0_MARK, + RD__FSC_MARK, + WE0__FWE_MARK, RDWR_FWE_MARK, + WE1__MARK, + FRB_MARK, + CKO_MARK, + NBRSTOUT__MARK, + NBRST__MARK, + BBIF2_TXD_MARK, + BBIF2_RXD_MARK, + BBIF2_SYNC_MARK, + BBIF2_SCK_MARK, + SCIFA3_CTS__MARK, MFG3_IN2_MARK, + SCIFA3_RXD_MARK, MFG3_IN1_MARK, + BBIF1_SS2_MARK, SCIFA3_RTS__MARK, MFG3_OUT1_MARK, + SCIFA3_TXD_MARK, + HSI_RX_DATA_MARK, BBIF1_RXD_MARK, + HSI_TX_WAKE_MARK, BBIF1_TSCK_MARK, + HSI_TX_DATA_MARK, BBIF1_TSYNC_MARK, + HSI_TX_READY_MARK, BBIF1_TXD_MARK, + HSI_RX_READY_MARK, BBIF1_RSCK_MARK, PORT115_I2C_SCL2_MARK, \ + PORT115_I2C_SCL3_MARK, + HSI_RX_WAKE_MARK, BBIF1_RSYNC_MARK, PORT116_I2C_SDA2_MARK, \ + PORT116_I2C_SDA3_MARK, + HSI_RX_FLAG_MARK, BBIF1_SS1_MARK, BBIF1_FLOW_MARK, + HSI_TX_FLAG_MARK, + VIO_VD_MARK, PORT128_LCD2VSYN_MARK, VIO2_VD_MARK, LCD2D0_MARK, + + VIO_HD_MARK, PORT129_LCD2HSYN_MARK, PORT129_LCD2CS__MARK, \ + VIO2_HD_MARK, LCD2D1_MARK, + VIO_D0_MARK, PORT130_MSIOF2_RXD_MARK, LCD2D10_MARK, + VIO_D1_MARK, PORT131_KEYOUT6_MARK, PORT131_MSIOF2_SS1_MARK, \ + PORT131_KEYOUT11_MARK, LCD2D11_MARK, + VIO_D2_MARK, PORT132_KEYOUT7_MARK, PORT132_MSIOF2_SS2_MARK, \ + PORT132_KEYOUT10_MARK, LCD2D12_MARK, + VIO_D3_MARK, MSIOF2_TSYNC_MARK, LCD2D13_MARK, + VIO_D4_MARK, MSIOF2_TXD_MARK, LCD2D14_MARK, + VIO_D5_MARK, MSIOF2_TSCK_MARK, LCD2D15_MARK, + VIO_D6_MARK, PORT136_KEYOUT8_MARK, LCD2D16_MARK, + VIO_D7_MARK, PORT137_KEYOUT9_MARK, LCD2D17_MARK, + VIO_D8_MARK, PORT138_KEYOUT8_MARK, VIO2_D0_MARK, LCD2D6_MARK, + VIO_D9_MARK, PORT139_KEYOUT9_MARK, VIO2_D1_MARK, LCD2D7_MARK, + VIO_D10_MARK, TPU0TO2_MARK, VIO2_D2_MARK, LCD2D8_MARK, + VIO_D11_MARK, TPU0TO3_MARK, VIO2_D3_MARK, LCD2D9_MARK, + VIO_D12_MARK, PORT142_KEYOUT10_MARK, VIO2_D4_MARK, LCD2D2_MARK, + VIO_D13_MARK, PORT143_KEYOUT11_MARK, PORT143_KEYOUT6_MARK, \ + VIO2_D5_MARK, LCD2D3_MARK, + VIO_D14_MARK, PORT144_KEYOUT7_MARK, VIO2_D6_MARK, LCD2D4_MARK, + VIO_D15_MARK, TPU1TO3_MARK, PORT145_LCD2DISP_MARK, \ + PORT145_LCD2RS_MARK, VIO2_D7_MARK, LCD2D5_MARK, + VIO_CLK_MARK, LCD2DCK_MARK, PORT146_LCD2WR__MARK, VIO2_CLK_MARK, \ + LCD2D18_MARK, + VIO_FIELD_MARK, LCD2RD__MARK, VIO2_FIELD_MARK, LCD2D19_MARK, + VIO_CKO_MARK, + A27_MARK, PORT149_RDWR_MARK, MFG0_IN1_MARK, PORT149_KEYOUT9_MARK, + MFG0_IN2_MARK, + TS_SPSYNC3_MARK, MSIOF2_RSCK_MARK, + TS_SDAT3_MARK, MSIOF2_RSYNC_MARK, + TPU1TO2_MARK, TS_SDEN3_MARK, PORT153_MSIOF2_SS1_MARK, + SCIFA2_TXD1_MARK, MSIOF2_MCK0_MARK, + SCIFA2_RXD1_MARK, MSIOF2_MCK1_MARK, + SCIFA2_RTS1__MARK, PORT156_MSIOF2_SS2_MARK, + SCIFA2_CTS1__MARK, PORT157_MSIOF2_RXD_MARK, + DINT__MARK, SCIFA2_SCK1_MARK, TS_SCK3_MARK, + PORT159_SCIFB_SCK_MARK, PORT159_SCIFA5_SCK_MARK, NMI_MARK, + PORT160_SCIFB_TXD_MARK, PORT160_SCIFA5_TXD_MARK, + PORT161_SCIFB_CTS__MARK, PORT161_SCIFA5_CTS__MARK, + PORT162_SCIFB_RXD_MARK, PORT162_SCIFA5_RXD_MARK, + PORT163_SCIFB_RTS__MARK, PORT163_SCIFA5_RTS__MARK, TPU3TO0_MARK, + LCDD0_MARK, + LCDD1_MARK, PORT193_SCIFA5_CTS__MARK, BBIF2_TSYNC1_MARK, + LCDD2_MARK, PORT194_SCIFA5_RTS__MARK, BBIF2_TSCK1_MARK, + LCDD3_MARK, PORT195_SCIFA5_RXD_MARK, BBIF2_TXD1_MARK, + LCDD4_MARK, PORT196_SCIFA5_TXD_MARK, + LCDD5_MARK, PORT197_SCIFA5_SCK_MARK, MFG2_OUT2_MARK, TPU2TO1_MARK, + LCDD6_MARK, + LCDD7_MARK, TPU4TO1_MARK, MFG4_OUT2_MARK, + LCDD8_MARK, D16_MARK, + LCDD9_MARK, D17_MARK, + LCDD10_MARK, D18_MARK, + LCDD11_MARK, D19_MARK, + LCDD12_MARK, D20_MARK, + LCDD13_MARK, D21_MARK, + LCDD14_MARK, D22_MARK, + LCDD15_MARK, PORT207_MSIOF0L_SS1_MARK, D23_MARK, + LCDD16_MARK, PORT208_MSIOF0L_SS2_MARK, D24_MARK, + LCDD17_MARK, D25_MARK, + LCDD18_MARK, DREQ2_MARK, PORT210_MSIOF0L_SS1_MARK, D26_MARK, + LCDD19_MARK, PORT211_MSIOF0L_SS2_MARK, D27_MARK, + LCDD20_MARK, TS_SPSYNC1_MARK, MSIOF0L_MCK0_MARK, D28_MARK, + LCDD21_MARK, TS_SDAT1_MARK, MSIOF0L_MCK1_MARK, D29_MARK, + LCDD22_MARK, TS_SDEN1_MARK, MSIOF0L_RSCK_MARK, D30_MARK, + LCDD23_MARK, TS_SCK1_MARK, MSIOF0L_RSYNC_MARK, D31_MARK, + LCDDCK_MARK, LCDWR__MARK, + LCDRD__MARK, DACK2_MARK, PORT217_LCD2RS_MARK, MSIOF0L_TSYNC_MARK, \ + VIO2_FIELD3_MARK, PORT217_LCD2DISP_MARK, + LCDHSYN_MARK, LCDCS__MARK, LCDCS2__MARK, DACK3_MARK, \ + PORT218_VIO_CKOR_MARK, + LCDDISP_MARK, LCDRS_MARK, PORT219_LCD2WR__MARK, DREQ3_MARK, \ + MSIOF0L_TSCK_MARK, VIO2_CLK3_MARK, LCD2DCK_2_MARK, + LCDVSYN_MARK, LCDVSYN2_MARK, + LCDLCLK_MARK, DREQ1_MARK, PORT221_LCD2CS__MARK, PWEN_MARK, \ + MSIOF0L_RXD_MARK, VIO2_HD3_MARK, PORT221_LCD2HSYN_MARK, + LCDDON_MARK, LCDDON2_MARK, DACK1_MARK, OVCN_MARK, MSIOF0L_TXD_MARK, \ + VIO2_VD3_MARK, PORT222_LCD2VSYN_MARK, + + SCIFA1_TXD_MARK, OVCN2_MARK, + EXTLP_MARK, SCIFA1_SCK_MARK, PORT226_VIO_CKO2_MARK, + SCIFA1_RTS__MARK, IDIN_MARK, + SCIFA1_RXD_MARK, + SCIFA1_CTS__MARK, MFG1_IN1_MARK, + MSIOF1_TXD_MARK, SCIFA2_TXD2_MARK, + MSIOF1_TSYNC_MARK, SCIFA2_CTS2__MARK, + MSIOF1_TSCK_MARK, SCIFA2_SCK2_MARK, + MSIOF1_RXD_MARK, SCIFA2_RXD2_MARK, + MSIOF1_RSCK_MARK, SCIFA2_RTS2__MARK, VIO2_CLK2_MARK, LCD2D20_MARK, + MSIOF1_RSYNC_MARK, MFG1_IN2_MARK, VIO2_VD2_MARK, LCD2D21_MARK, + MSIOF1_MCK0_MARK, PORT236_I2C_SDA2_MARK, + MSIOF1_MCK1_MARK, PORT237_I2C_SCL2_MARK, + MSIOF1_SS1_MARK, VIO2_FIELD2_MARK, LCD2D22_MARK, + MSIOF1_SS2_MARK, VIO2_HD2_MARK, LCD2D23_MARK, + SCIFA6_TXD_MARK, + PORT241_IRDA_OUT_MARK, PORT241_IROUT_MARK, MFG4_OUT1_MARK, TPU4TO0_MARK, + PORT242_IRDA_IN_MARK, MFG4_IN2_MARK, + PORT243_IRDA_FIRSEL_MARK, PORT243_VIO_CKO2_MARK, + PORT244_SCIFA5_CTS__MARK, MFG2_IN1_MARK, PORT244_SCIFB_CTS__MARK, \ + MSIOF2R_RXD_MARK, + PORT245_SCIFA5_RTS__MARK, MFG2_IN2_MARK, PORT245_SCIFB_RTS__MARK, \ + MSIOF2R_TXD_MARK, + PORT246_SCIFA5_RXD_MARK, MFG1_OUT1_MARK, PORT246_SCIFB_RXD_MARK, \ + TPU1TO0_MARK, + PORT247_SCIFA5_TXD_MARK, MFG3_OUT2_MARK, PORT247_SCIFB_TXD_MARK, \ + TPU3TO1_MARK, + PORT248_SCIFA5_SCK_MARK, MFG2_OUT1_MARK, PORT248_SCIFB_SCK_MARK, \ + TPU2TO0_MARK, PORT248_I2C_SCL3_MARK, MSIOF2R_TSCK_MARK, + PORT249_IROUT_MARK, MFG4_IN1_MARK, PORT249_I2C_SDA3_MARK, \ + MSIOF2R_TSYNC_MARK, + SDHICLK0_MARK, + SDHICD0_MARK, + SDHID0_0_MARK, + SDHID0_1_MARK, + SDHID0_2_MARK, + SDHID0_3_MARK, + SDHICMD0_MARK, + SDHIWP0_MARK, + SDHICLK1_MARK, + SDHID1_0_MARK, TS_SPSYNC2_MARK, + SDHID1_1_MARK, TS_SDAT2_MARK, + SDHID1_2_MARK, TS_SDEN2_MARK, + SDHID1_3_MARK, TS_SCK2_MARK, + SDHICMD1_MARK, + SDHICLK2_MARK, + SDHID2_0_MARK, TS_SPSYNC4_MARK, + SDHID2_1_MARK, TS_SDAT4_MARK, + SDHID2_2_MARK, TS_SDEN4_MARK, + SDHID2_3_MARK, TS_SCK4_MARK, + SDHICMD2_MARK, + MMCCLK0_MARK, + MMCD0_0_MARK, + MMCD0_1_MARK, + MMCD0_2_MARK, + MMCD0_3_MARK, + MMCD0_4_MARK, TS_SPSYNC5_MARK, + MMCD0_5_MARK, TS_SDAT5_MARK, + MMCD0_6_MARK, TS_SDEN5_MARK, + MMCD0_7_MARK, TS_SCK5_MARK, + MMCCMD0_MARK, + RESETOUTS__MARK, EXTAL2OUT_MARK, + MCP_WAIT__MCP_FRB_MARK, + MCP_CKO_MARK, MMCCLK1_MARK, + MCP_D15_MCP_NAF15_MARK, + MCP_D14_MCP_NAF14_MARK, + MCP_D13_MCP_NAF13_MARK, + MCP_D12_MCP_NAF12_MARK, + MCP_D11_MCP_NAF11_MARK, + MCP_D10_MCP_NAF10_MARK, + MCP_D9_MCP_NAF9_MARK, + MCP_D8_MCP_NAF8_MARK, MMCCMD1_MARK, + MCP_D7_MCP_NAF7_MARK, MMCD1_7_MARK, + + MCP_D6_MCP_NAF6_MARK, MMCD1_6_MARK, + MCP_D5_MCP_NAF5_MARK, MMCD1_5_MARK, + MCP_D4_MCP_NAF4_MARK, MMCD1_4_MARK, + MCP_D3_MCP_NAF3_MARK, MMCD1_3_MARK, + MCP_D2_MCP_NAF2_MARK, MMCD1_2_MARK, + MCP_D1_MCP_NAF1_MARK, MMCD1_1_MARK, + MCP_D0_MCP_NAF0_MARK, MMCD1_0_MARK, + MCP_NBRSTOUT__MARK, + MCP_WE0__MCP_FWE_MARK, MCP_RDWR_MCP_FWE_MARK, + + /* MSEL2 special cases */ + TSIF2_TS_XX1_MARK, + TSIF2_TS_XX2_MARK, + TSIF2_TS_XX3_MARK, + TSIF2_TS_XX4_MARK, + TSIF2_TS_XX5_MARK, + TSIF1_TS_XX1_MARK, + TSIF1_TS_XX2_MARK, + TSIF1_TS_XX3_MARK, + TSIF1_TS_XX4_MARK, + TSIF1_TS_XX5_MARK, + TSIF0_TS_XX1_MARK, + TSIF0_TS_XX2_MARK, + TSIF0_TS_XX3_MARK, + TSIF0_TS_XX4_MARK, + TSIF0_TS_XX5_MARK, + MST1_TS_XX1_MARK, + MST1_TS_XX2_MARK, + MST1_TS_XX3_MARK, + MST1_TS_XX4_MARK, + MST1_TS_XX5_MARK, + MST0_TS_XX1_MARK, + MST0_TS_XX2_MARK, + MST0_TS_XX3_MARK, + MST0_TS_XX4_MARK, + MST0_TS_XX5_MARK, + + /* MSEL3 special cases */ + SDHI0_VCCQ_MC0_ON_MARK, + SDHI0_VCCQ_MC0_OFF_MARK, + DEBUG_MON_VIO_MARK, + DEBUG_MON_LCDD_MARK, + LCDC_LCDC0_MARK, + LCDC_LCDC1_MARK, + + /* MSEL4 special cases */ + IRQ9_MEM_INT_MARK, + IRQ9_MCP_INT_MARK, + A11_MARK, + KEYOUT8_MARK, + TPU4TO3_MARK, + RESETA_N_PU_ON_MARK, + RESETA_N_PU_OFF_MARK, + EDBGREQ_PD_MARK, + EDBGREQ_PU_MARK, + + /* Functions with pull-ups */ + KEYIN0_PU_MARK, + KEYIN1_PU_MARK, + KEYIN2_PU_MARK, + KEYIN3_PU_MARK, + KEYIN4_PU_MARK, + KEYIN5_PU_MARK, + KEYIN6_PU_MARK, + KEYIN7_PU_MARK, + SDHICD0_PU_MARK, + SDHID0_0_PU_MARK, + SDHID0_1_PU_MARK, + SDHID0_2_PU_MARK, + SDHID0_3_PU_MARK, + SDHICMD0_PU_MARK, + SDHIWP0_PU_MARK, + SDHID1_0_PU_MARK, + SDHID1_1_PU_MARK, + SDHID1_2_PU_MARK, + SDHID1_3_PU_MARK, + SDHICMD1_PU_MARK, + SDHID2_0_PU_MARK, + SDHID2_1_PU_MARK, + SDHID2_2_PU_MARK, + SDHID2_3_PU_MARK, + SDHICMD2_PU_MARK, + MMCCMD0_PU_MARK, + MMCCMD1_PU_MARK, + MMCD0_0_PU_MARK, + MMCD0_1_PU_MARK, + MMCD0_2_PU_MARK, + MMCD0_3_PU_MARK, + MMCD0_4_PU_MARK, + MMCD0_5_PU_MARK, + MMCD0_6_PU_MARK, + MMCD0_7_PU_MARK, + FSIBISLD_PU_MARK, + FSIACK_PU_MARK, + FSIAILR_PU_MARK, + FSIAIBT_PU_MARK, + FSIAISLD_PU_MARK, + + PINMUX_MARK_END, +}; + +static unsigned short pinmux_data[] = { + /* specify valid pin states for each pin in GPIO mode */ + + /* Table 25-1 (I/O and Pull U/D) */ + PORT_DATA_I_PD(0), + PORT_DATA_I_PU(1), + PORT_DATA_I_PU(2), + PORT_DATA_I_PU(3), + PORT_DATA_I_PU(4), + PORT_DATA_I_PU(5), + PORT_DATA_I_PU(6), + PORT_DATA_I_PU(7), + PORT_DATA_I_PU(8), + PORT_DATA_I_PD(9), + PORT_DATA_I_PD(10), + PORT_DATA_I_PU_PD(11), + PORT_DATA_IO_PU_PD(12), + PORT_DATA_IO_PU_PD(13), + PORT_DATA_IO_PU_PD(14), + PORT_DATA_IO_PU_PD(15), + PORT_DATA_IO_PD(16), + PORT_DATA_IO_PD(17), + PORT_DATA_IO_PU(18), + PORT_DATA_IO_PU(19), + PORT_DATA_O(20), + PORT_DATA_O(21), + PORT_DATA_O(22), + PORT_DATA_O(23), + PORT_DATA_O(24), + PORT_DATA_I_PD(25), + PORT_DATA_I_PD(26), + PORT_DATA_IO_PU(27), + PORT_DATA_IO_PU(28), + PORT_DATA_IO_PD(29), + PORT_DATA_IO_PD(30), + PORT_DATA_IO_PU(31), + PORT_DATA_IO_PD(32), + PORT_DATA_I_PU_PD(33), + PORT_DATA_IO_PD(34), + PORT_DATA_I_PU_PD(35), + PORT_DATA_IO_PD(36), + PORT_DATA_IO(37), + PORT_DATA_O(38), + PORT_DATA_I_PU(39), + PORT_DATA_I_PU_PD(40), + PORT_DATA_O(41), + PORT_DATA_IO_PD(42), + PORT_DATA_IO_PU_PD(43), + PORT_DATA_IO_PU_PD(44), + PORT_DATA_IO_PD(45), + PORT_DATA_IO_PD(46), + PORT_DATA_IO_PD(47), + PORT_DATA_I_PD(48), + PORT_DATA_IO_PU_PD(49), + PORT_DATA_IO_PD(50), + + PORT_DATA_IO_PD(51), + PORT_DATA_O(52), + PORT_DATA_IO_PU_PD(53), + PORT_DATA_IO_PU_PD(54), + PORT_DATA_IO_PD(55), + PORT_DATA_I_PU_PD(56), + PORT_DATA_IO(57), + PORT_DATA_IO(58), + PORT_DATA_IO(59), + PORT_DATA_IO(60), + PORT_DATA_IO(61), + PORT_DATA_IO_PD(62), + PORT_DATA_IO_PD(63), + PORT_DATA_IO_PU_PD(64), + PORT_DATA_IO_PD(65), + PORT_DATA_IO_PU_PD(66), + PORT_DATA_IO_PU_PD(67), + PORT_DATA_IO_PU_PD(68), + PORT_DATA_IO_PU_PD(69), + PORT_DATA_IO_PU_PD(70), + PORT_DATA_IO_PU_PD(71), + PORT_DATA_IO_PU_PD(72), + PORT_DATA_I_PU_PD(73), + PORT_DATA_IO_PU(74), + PORT_DATA_IO_PU(75), + PORT_DATA_IO_PU(76), + PORT_DATA_IO_PU(77), + PORT_DATA_IO_PU(78), + PORT_DATA_IO_PU(79), + PORT_DATA_IO_PU(80), + PORT_DATA_IO_PU(81), + PORT_DATA_IO_PU(82), + PORT_DATA_IO_PU(83), + PORT_DATA_IO_PU(84), + PORT_DATA_IO_PU(85), + PORT_DATA_IO_PU(86), + PORT_DATA_IO_PU(87), + PORT_DATA_IO_PU(88), + PORT_DATA_IO_PU(89), + PORT_DATA_O(90), + PORT_DATA_IO_PU(91), + PORT_DATA_O(92), + PORT_DATA_IO_PU(93), + PORT_DATA_O(94), + PORT_DATA_I_PU_PD(95), + PORT_DATA_IO(96), + PORT_DATA_IO(97), + PORT_DATA_IO(98), + PORT_DATA_I_PU(99), + PORT_DATA_O(100), + PORT_DATA_O(101), + PORT_DATA_I_PU(102), + PORT_DATA_IO_PD(103), + PORT_DATA_I_PU_PD(104), + PORT_DATA_I_PD(105), + PORT_DATA_I_PD(106), + PORT_DATA_I_PU_PD(107), + PORT_DATA_I_PU_PD(108), + PORT_DATA_IO_PD(109), + PORT_DATA_IO_PD(110), + PORT_DATA_IO_PU_PD(111), + PORT_DATA_IO_PU_PD(112), + PORT_DATA_IO_PU_PD(113), + PORT_DATA_IO_PD(114), + PORT_DATA_IO_PU(115), + PORT_DATA_IO_PU(116), + PORT_DATA_IO_PU_PD(117), + PORT_DATA_IO_PU_PD(118), + PORT_DATA_IO_PD(128), + + PORT_DATA_IO_PD(129), + PORT_DATA_IO_PU_PD(130), + PORT_DATA_IO_PD(131), + PORT_DATA_IO_PD(132), + PORT_DATA_IO_PD(133), + PORT_DATA_IO_PU_PD(134), + PORT_DATA_IO_PU_PD(135), + PORT_DATA_IO_PU_PD(136), + PORT_DATA_IO_PU_PD(137), + PORT_DATA_IO_PD(138), + PORT_DATA_IO_PD(139), + PORT_DATA_IO_PD(140), + PORT_DATA_IO_PD(141), + PORT_DATA_IO_PD(142), + PORT_DATA_IO_PD(143), + PORT_DATA_IO_PU_PD(144), + PORT_DATA_IO_PD(145), + PORT_DATA_IO_PU_PD(146), + PORT_DATA_IO_PU_PD(147), + PORT_DATA_IO_PU_PD(148), + PORT_DATA_IO_PU_PD(149), + PORT_DATA_I_PU_PD(150), + PORT_DATA_IO_PU_PD(151), + PORT_DATA_IO_PU_PD(152), + PORT_DATA_IO_PD(153), + PORT_DATA_IO_PD(154), + PORT_DATA_I_PU_PD(155), + PORT_DATA_IO_PU_PD(156), + PORT_DATA_I_PD(157), + PORT_DATA_IO_PD(158), + PORT_DATA_IO_PU_PD(159), + PORT_DATA_IO_PU_PD(160), + PORT_DATA_I_PU_PD(161), + PORT_DATA_I_PU_PD(162), + PORT_DATA_IO_PU_PD(163), + PORT_DATA_I_PU_PD(164), + PORT_DATA_IO_PD(192), + PORT_DATA_IO_PU_PD(193), + PORT_DATA_IO_PD(194), + PORT_DATA_IO_PU_PD(195), + PORT_DATA_IO_PD(196), + PORT_DATA_IO_PD(197), + PORT_DATA_IO_PD(198), + PORT_DATA_IO_PD(199), + PORT_DATA_IO_PU_PD(200), + PORT_DATA_IO_PU_PD(201), + PORT_DATA_IO_PU_PD(202), + PORT_DATA_IO_PU_PD(203), + PORT_DATA_IO_PU_PD(204), + PORT_DATA_IO_PU_PD(205), + PORT_DATA_IO_PU_PD(206), + PORT_DATA_IO_PD(207), + PORT_DATA_IO_PD(208), + PORT_DATA_IO_PD(209), + PORT_DATA_IO_PD(210), + PORT_DATA_IO_PD(211), + PORT_DATA_IO_PD(212), + PORT_DATA_IO_PD(213), + PORT_DATA_IO_PU_PD(214), + PORT_DATA_IO_PU_PD(215), + PORT_DATA_IO_PD(216), + PORT_DATA_IO_PD(217), + PORT_DATA_O(218), + PORT_DATA_IO_PD(219), + PORT_DATA_IO_PD(220), + PORT_DATA_IO_PU_PD(221), + PORT_DATA_IO_PU_PD(222), + PORT_DATA_I_PU_PD(223), + PORT_DATA_I_PU_PD(224), + + PORT_DATA_IO_PU_PD(225), + PORT_DATA_O(226), + PORT_DATA_IO_PU_PD(227), + PORT_DATA_I_PU_PD(228), + PORT_DATA_I_PD(229), + PORT_DATA_IO(230), + PORT_DATA_IO_PU_PD(231), + PORT_DATA_IO_PU_PD(232), + PORT_DATA_I_PU_PD(233), + PORT_DATA_IO_PU_PD(234), + PORT_DATA_IO_PU_PD(235), + PORT_DATA_IO_PU_PD(236), + PORT_DATA_IO_PD(237), + PORT_DATA_IO_PU_PD(238), + PORT_DATA_IO_PU_PD(239), + PORT_DATA_IO_PU_PD(240), + PORT_DATA_O(241), + PORT_DATA_I_PD(242), + PORT_DATA_IO_PU_PD(243), + PORT_DATA_IO_PU_PD(244), + PORT_DATA_IO_PU_PD(245), + PORT_DATA_IO_PU_PD(246), + PORT_DATA_IO_PU_PD(247), + PORT_DATA_IO_PU_PD(248), + PORT_DATA_IO_PU_PD(249), + PORT_DATA_IO_PU_PD(250), + PORT_DATA_IO_PU_PD(251), + PORT_DATA_IO_PU_PD(252), + PORT_DATA_IO_PU_PD(253), + PORT_DATA_IO_PU_PD(254), + PORT_DATA_IO_PU_PD(255), + PORT_DATA_IO_PU_PD(256), + PORT_DATA_IO_PU_PD(257), + PORT_DATA_IO_PU_PD(258), + PORT_DATA_IO_PU_PD(259), + PORT_DATA_IO_PU_PD(260), + PORT_DATA_IO_PU_PD(261), + PORT_DATA_IO_PU_PD(262), + PORT_DATA_IO_PU_PD(263), + PORT_DATA_IO_PU_PD(264), + PORT_DATA_IO_PU_PD(265), + PORT_DATA_IO_PU_PD(266), + PORT_DATA_IO_PU_PD(267), + PORT_DATA_IO_PU_PD(268), + PORT_DATA_IO_PU_PD(269), + PORT_DATA_IO_PU_PD(270), + PORT_DATA_IO_PU_PD(271), + PORT_DATA_IO_PU_PD(272), + PORT_DATA_IO_PU_PD(273), + PORT_DATA_IO_PU_PD(274), + PORT_DATA_IO_PU_PD(275), + PORT_DATA_IO_PU_PD(276), + PORT_DATA_IO_PU_PD(277), + PORT_DATA_IO_PU_PD(278), + PORT_DATA_IO_PU_PD(279), + PORT_DATA_IO_PU_PD(280), + PORT_DATA_O(281), + PORT_DATA_O(282), + PORT_DATA_I_PU(288), + PORT_DATA_IO_PU_PD(289), + PORT_DATA_IO_PU_PD(290), + PORT_DATA_IO_PU_PD(291), + PORT_DATA_IO_PU_PD(292), + PORT_DATA_IO_PU_PD(293), + PORT_DATA_IO_PU_PD(294), + PORT_DATA_IO_PU_PD(295), + PORT_DATA_IO_PU_PD(296), + PORT_DATA_IO_PU_PD(297), + PORT_DATA_IO_PU_PD(298), + + PORT_DATA_IO_PU_PD(299), + PORT_DATA_IO_PU_PD(300), + PORT_DATA_IO_PU_PD(301), + PORT_DATA_IO_PU_PD(302), + PORT_DATA_IO_PU_PD(303), + PORT_DATA_IO_PU_PD(304), + PORT_DATA_IO_PU_PD(305), + PORT_DATA_O(306), + PORT_DATA_O(307), + PORT_DATA_I_PU(308), + PORT_DATA_O(309), + + /* Table 25-1 (Function 0-7) */ + PINMUX_DATA(VBUS_0_MARK, PORT0_FN1), + PINMUX_DATA(GPI0_MARK, PORT1_FN1), + PINMUX_DATA(GPI1_MARK, PORT2_FN1), + PINMUX_DATA(GPI2_MARK, PORT3_FN1), + PINMUX_DATA(GPI3_MARK, PORT4_FN1), + PINMUX_DATA(GPI4_MARK, PORT5_FN1), + PINMUX_DATA(GPI5_MARK, PORT6_FN1), + PINMUX_DATA(GPI6_MARK, PORT7_FN1), + PINMUX_DATA(GPI7_MARK, PORT8_FN1), + PINMUX_DATA(SCIFA7_RXD_MARK, PORT12_FN2), + PINMUX_DATA(SCIFA7_CTS__MARK, PORT13_FN2), + PINMUX_DATA(GPO7_MARK, PORT14_FN1), \ + PINMUX_DATA(MFG0_OUT2_MARK, PORT14_FN4), + PINMUX_DATA(GPO6_MARK, PORT15_FN1), \ + PINMUX_DATA(MFG1_OUT2_MARK, PORT15_FN4), + PINMUX_DATA(GPO5_MARK, PORT16_FN1), \ + PINMUX_DATA(SCIFA0_SCK_MARK, PORT16_FN2), \ + PINMUX_DATA(FSICOSLDT3_MARK, PORT16_FN3), \ + PINMUX_DATA(PORT16_VIO_CKOR_MARK, PORT16_FN4), + PINMUX_DATA(SCIFA0_TXD_MARK, PORT17_FN2), + PINMUX_DATA(SCIFA7_TXD_MARK, PORT18_FN2), + PINMUX_DATA(SCIFA7_RTS__MARK, PORT19_FN2), \ + PINMUX_DATA(PORT19_VIO_CKO2_MARK, PORT19_FN3), + PINMUX_DATA(GPO0_MARK, PORT20_FN1), + PINMUX_DATA(GPO1_MARK, PORT21_FN1), + PINMUX_DATA(GPO2_MARK, PORT22_FN1), \ + PINMUX_DATA(STATUS0_MARK, PORT22_FN2), + PINMUX_DATA(GPO3_MARK, PORT23_FN1), \ + PINMUX_DATA(STATUS1_MARK, PORT23_FN2), + PINMUX_DATA(GPO4_MARK, PORT24_FN1), \ + PINMUX_DATA(STATUS2_MARK, PORT24_FN2), + PINMUX_DATA(VINT_MARK, PORT25_FN1), + PINMUX_DATA(TCKON_MARK, PORT26_FN1), + PINMUX_DATA(XDVFS1_MARK, PORT27_FN1), \ + PINMUX_DATA(PORT27_I2C_SCL2_MARK, PORT27_FN2, MSEL2CR_MSEL17_0, + MSEL2CR_MSEL16_1), \ + PINMUX_DATA(PORT27_I2C_SCL3_MARK, PORT27_FN3, MSEL2CR_MSEL19_0, + MSEL2CR_MSEL18_1), \ + PINMUX_DATA(MFG0_OUT1_MARK, PORT27_FN4), \ + PINMUX_DATA(PORT27_IROUT_MARK, PORT27_FN7), + PINMUX_DATA(XDVFS2_MARK, PORT28_FN1), \ + PINMUX_DATA(PORT28_I2C_SDA2_MARK, PORT28_FN2, MSEL2CR_MSEL17_0, + MSEL2CR_MSEL16_1), \ + PINMUX_DATA(PORT28_I2C_SDA3_MARK, PORT28_FN3, MSEL2CR_MSEL19_0, + MSEL2CR_MSEL18_1), \ + PINMUX_DATA(PORT28_TPU1TO1_MARK, PORT28_FN7), + PINMUX_DATA(SIM_RST_MARK, PORT29_FN1), \ + PINMUX_DATA(PORT29_TPU1TO1_MARK, PORT29_FN4), + PINMUX_DATA(SIM_CLK_MARK, PORT30_FN1), \ + PINMUX_DATA(PORT30_VIO_CKOR_MARK, PORT30_FN4), + PINMUX_DATA(SIM_D_MARK, PORT31_FN1), \ + PINMUX_DATA(PORT31_IROUT_MARK, PORT31_FN4), + PINMUX_DATA(SCIFA4_TXD_MARK, PORT32_FN2), + PINMUX_DATA(SCIFA4_RXD_MARK, PORT33_FN2), \ + PINMUX_DATA(XWUP_MARK, PORT33_FN3), + PINMUX_DATA(SCIFA4_RTS__MARK, PORT34_FN2), + PINMUX_DATA(SCIFA4_CTS__MARK, PORT35_FN2), + PINMUX_DATA(FSIBOBT_MARK, PORT36_FN1), \ + PINMUX_DATA(FSIBIBT_MARK, PORT36_FN2), + PINMUX_DATA(FSIBOLR_MARK, PORT37_FN1), \ + PINMUX_DATA(FSIBILR_MARK, PORT37_FN2), + PINMUX_DATA(FSIBOSLD_MARK, PORT38_FN1), + PINMUX_DATA(FSIBISLD_MARK, PORT39_FN1), + PINMUX_DATA(VACK_MARK, PORT40_FN1), + PINMUX_DATA(XTAL1L_MARK, PORT41_FN1), + PINMUX_DATA(SCIFA0_RTS__MARK, PORT42_FN2), \ + PINMUX_DATA(FSICOSLDT2_MARK, PORT42_FN3), + PINMUX_DATA(SCIFA0_RXD_MARK, PORT43_FN2), + PINMUX_DATA(SCIFA0_CTS__MARK, PORT44_FN2), \ + PINMUX_DATA(FSICOSLDT1_MARK, PORT44_FN3), + PINMUX_DATA(FSICOBT_MARK, PORT45_FN1), \ + PINMUX_DATA(FSICIBT_MARK, PORT45_FN2), \ + PINMUX_DATA(FSIDOBT_MARK, PORT45_FN3), \ + PINMUX_DATA(FSIDIBT_MARK, PORT45_FN4), + PINMUX_DATA(FSICOLR_MARK, PORT46_FN1), \ + PINMUX_DATA(FSICILR_MARK, PORT46_FN2), \ + PINMUX_DATA(FSIDOLR_MARK, PORT46_FN3), \ + PINMUX_DATA(FSIDILR_MARK, PORT46_FN4), + PINMUX_DATA(FSICOSLD_MARK, PORT47_FN1), \ + PINMUX_DATA(PORT47_FSICSPDIF_MARK, PORT47_FN2), + PINMUX_DATA(FSICISLD_MARK, PORT48_FN1), \ + PINMUX_DATA(FSIDISLD_MARK, PORT48_FN3), + PINMUX_DATA(FSIACK_MARK, PORT49_FN1), \ + PINMUX_DATA(PORT49_IRDA_OUT_MARK, PORT49_FN2, MSEL4CR_MSEL19_1), \ + PINMUX_DATA(PORT49_IROUT_MARK, PORT49_FN4), \ + PINMUX_DATA(FSIAOMC_MARK, PORT49_FN5), + PINMUX_DATA(FSIAOLR_MARK, PORT50_FN1), \ + PINMUX_DATA(BBIF2_TSYNC2_MARK, PORT50_FN2), \ + PINMUX_DATA(TPU2TO2_MARK, PORT50_FN3), \ + PINMUX_DATA(FSIAILR_MARK, PORT50_FN5), + + PINMUX_DATA(FSIAOBT_MARK, PORT51_FN1), \ + PINMUX_DATA(BBIF2_TSCK2_MARK, PORT51_FN2), \ + PINMUX_DATA(TPU2TO3_MARK, PORT51_FN3), \ + PINMUX_DATA(FSIAIBT_MARK, PORT51_FN5), + PINMUX_DATA(FSIAOSLD_MARK, PORT52_FN1), \ + PINMUX_DATA(BBIF2_TXD2_MARK, PORT52_FN2), + PINMUX_DATA(FSIASPDIF_MARK, PORT53_FN1), \ + PINMUX_DATA(PORT53_IRDA_IN_MARK, PORT53_FN2, MSEL4CR_MSEL19_1), \ + PINMUX_DATA(TPU3TO3_MARK, PORT53_FN3), \ + PINMUX_DATA(FSIBSPDIF_MARK, PORT53_FN5), \ + PINMUX_DATA(PORT53_FSICSPDIF_MARK, PORT53_FN6), + PINMUX_DATA(FSIBCK_MARK, PORT54_FN1), \ + PINMUX_DATA(PORT54_IRDA_FIRSEL_MARK, PORT54_FN2, MSEL4CR_MSEL19_1), \ + PINMUX_DATA(TPU3TO2_MARK, PORT54_FN3), \ + PINMUX_DATA(FSIBOMC_MARK, PORT54_FN5), \ + PINMUX_DATA(FSICCK_MARK, PORT54_FN6), \ + PINMUX_DATA(FSICOMC_MARK, PORT54_FN7), + PINMUX_DATA(FSIAISLD_MARK, PORT55_FN1), \ + PINMUX_DATA(TPU0TO0_MARK, PORT55_FN3), + PINMUX_DATA(A0_MARK, PORT57_FN1), \ + PINMUX_DATA(BS__MARK, PORT57_FN2), + PINMUX_DATA(A12_MARK, PORT58_FN1), \ + PINMUX_DATA(PORT58_KEYOUT7_MARK, PORT58_FN2), \ + PINMUX_DATA(TPU4TO2_MARK, PORT58_FN4), + PINMUX_DATA(A13_MARK, PORT59_FN1), \ + PINMUX_DATA(PORT59_KEYOUT6_MARK, PORT59_FN2), \ + PINMUX_DATA(TPU0TO1_MARK, PORT59_FN4), + PINMUX_DATA(A14_MARK, PORT60_FN1), \ + PINMUX_DATA(KEYOUT5_MARK, PORT60_FN2), + PINMUX_DATA(A15_MARK, PORT61_FN1), \ + PINMUX_DATA(KEYOUT4_MARK, PORT61_FN2), + PINMUX_DATA(A16_MARK, PORT62_FN1), \ + PINMUX_DATA(KEYOUT3_MARK, PORT62_FN2), \ + PINMUX_DATA(MSIOF0_SS1_MARK, PORT62_FN4, MSEL3CR_MSEL11_0), + PINMUX_DATA(A17_MARK, PORT63_FN1), \ + PINMUX_DATA(KEYOUT2_MARK, PORT63_FN2), \ + PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT63_FN4, MSEL3CR_MSEL11_0), + PINMUX_DATA(A18_MARK, PORT64_FN1), \ + PINMUX_DATA(KEYOUT1_MARK, PORT64_FN2), \ + PINMUX_DATA(MSIOF0_TSCK_MARK, PORT64_FN4, MSEL3CR_MSEL11_0), + PINMUX_DATA(A19_MARK, PORT65_FN1), \ + PINMUX_DATA(KEYOUT0_MARK, PORT65_FN2), \ + PINMUX_DATA(MSIOF0_TXD_MARK, PORT65_FN4, MSEL3CR_MSEL11_0), + PINMUX_DATA(A20_MARK, PORT66_FN1), \ + PINMUX_DATA(KEYIN0_MARK, PORT66_FN2), \ + PINMUX_DATA(MSIOF0_RSCK_MARK, PORT66_FN4, MSEL3CR_MSEL11_0), + PINMUX_DATA(A21_MARK, PORT67_FN1), \ + PINMUX_DATA(KEYIN1_MARK, PORT67_FN2), \ + PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT67_FN4, MSEL3CR_MSEL11_0), + PINMUX_DATA(A22_MARK, PORT68_FN1), \ + PINMUX_DATA(KEYIN2_MARK, PORT68_FN2), \ + PINMUX_DATA(MSIOF0_MCK0_MARK, PORT68_FN4, MSEL3CR_MSEL11_0), + PINMUX_DATA(A23_MARK, PORT69_FN1), \ + PINMUX_DATA(KEYIN3_MARK, PORT69_FN2), \ + PINMUX_DATA(MSIOF0_MCK1_MARK, PORT69_FN4, MSEL3CR_MSEL11_0), + PINMUX_DATA(A24_MARK, PORT70_FN1), \ + PINMUX_DATA(KEYIN4_MARK, PORT70_FN2), \ + PINMUX_DATA(MSIOF0_RXD_MARK, PORT70_FN4, MSEL3CR_MSEL11_0), + PINMUX_DATA(A25_MARK, PORT71_FN1), \ + PINMUX_DATA(KEYIN5_MARK, PORT71_FN2), \ + PINMUX_DATA(MSIOF0_SS2_MARK, PORT71_FN4, MSEL3CR_MSEL11_0), + PINMUX_DATA(A26_MARK, PORT72_FN1), \ + PINMUX_DATA(KEYIN6_MARK, PORT72_FN2), + PINMUX_DATA(KEYIN7_MARK, PORT73_FN2), + PINMUX_DATA(D0_NAF0_MARK, PORT74_FN1), + PINMUX_DATA(D1_NAF1_MARK, PORT75_FN1), + PINMUX_DATA(D2_NAF2_MARK, PORT76_FN1), + PINMUX_DATA(D3_NAF3_MARK, PORT77_FN1), + PINMUX_DATA(D4_NAF4_MARK, PORT78_FN1), + PINMUX_DATA(D5_NAF5_MARK, PORT79_FN1), + PINMUX_DATA(D6_NAF6_MARK, PORT80_FN1), + PINMUX_DATA(D7_NAF7_MARK, PORT81_FN1), + PINMUX_DATA(D8_NAF8_MARK, PORT82_FN1), + PINMUX_DATA(D9_NAF9_MARK, PORT83_FN1), + PINMUX_DATA(D10_NAF10_MARK, PORT84_FN1), + PINMUX_DATA(D11_NAF11_MARK, PORT85_FN1), + PINMUX_DATA(D12_NAF12_MARK, PORT86_FN1), + PINMUX_DATA(D13_NAF13_MARK, PORT87_FN1), + PINMUX_DATA(D14_NAF14_MARK, PORT88_FN1), + PINMUX_DATA(D15_NAF15_MARK, PORT89_FN1), + PINMUX_DATA(CS4__MARK, PORT90_FN1), + PINMUX_DATA(CS5A__MARK, PORT91_FN1), \ + PINMUX_DATA(PORT91_RDWR_MARK, PORT91_FN2), + PINMUX_DATA(CS5B__MARK, PORT92_FN1), \ + PINMUX_DATA(FCE1__MARK, PORT92_FN2), + PINMUX_DATA(CS6B__MARK, PORT93_FN1), \ + PINMUX_DATA(DACK0_MARK, PORT93_FN4), + PINMUX_DATA(FCE0__MARK, PORT94_FN1), \ + PINMUX_DATA(CS6A__MARK, PORT94_FN2), + PINMUX_DATA(WAIT__MARK, PORT95_FN1), \ + PINMUX_DATA(DREQ0_MARK, PORT95_FN2), + PINMUX_DATA(RD__FSC_MARK, PORT96_FN1), + PINMUX_DATA(WE0__FWE_MARK, PORT97_FN1), \ + PINMUX_DATA(RDWR_FWE_MARK, PORT97_FN2), + PINMUX_DATA(WE1__MARK, PORT98_FN1), + PINMUX_DATA(FRB_MARK, PORT99_FN1), + PINMUX_DATA(CKO_MARK, PORT100_FN1), + PINMUX_DATA(NBRSTOUT__MARK, PORT101_FN1), + PINMUX_DATA(NBRST__MARK, PORT102_FN1), + PINMUX_DATA(BBIF2_TXD_MARK, PORT103_FN3), + PINMUX_DATA(BBIF2_RXD_MARK, PORT104_FN3), + PINMUX_DATA(BBIF2_SYNC_MARK, PORT105_FN3), + PINMUX_DATA(BBIF2_SCK_MARK, PORT106_FN3), + PINMUX_DATA(SCIFA3_CTS__MARK, PORT107_FN3), \ + PINMUX_DATA(MFG3_IN2_MARK, PORT107_FN4), + PINMUX_DATA(SCIFA3_RXD_MARK, PORT108_FN3), \ + PINMUX_DATA(MFG3_IN1_MARK, PORT108_FN4), + PINMUX_DATA(BBIF1_SS2_MARK, PORT109_FN2), \ + PINMUX_DATA(SCIFA3_RTS__MARK, PORT109_FN3), \ + PINMUX_DATA(MFG3_OUT1_MARK, PORT109_FN4), + PINMUX_DATA(SCIFA3_TXD_MARK, PORT110_FN3), + PINMUX_DATA(HSI_RX_DATA_MARK, PORT111_FN1), \ + PINMUX_DATA(BBIF1_RXD_MARK, PORT111_FN3), + PINMUX_DATA(HSI_TX_WAKE_MARK, PORT112_FN1), \ + PINMUX_DATA(BBIF1_TSCK_MARK, PORT112_FN3), + PINMUX_DATA(HSI_TX_DATA_MARK, PORT113_FN1), \ + PINMUX_DATA(BBIF1_TSYNC_MARK, PORT113_FN3), + PINMUX_DATA(HSI_TX_READY_MARK, PORT114_FN1), \ + PINMUX_DATA(BBIF1_TXD_MARK, PORT114_FN3), + PINMUX_DATA(HSI_RX_READY_MARK, PORT115_FN1), \ + PINMUX_DATA(BBIF1_RSCK_MARK, PORT115_FN3), \ + PINMUX_DATA(PORT115_I2C_SCL2_MARK, PORT115_FN5, MSEL2CR_MSEL17_1), \ + PINMUX_DATA(PORT115_I2C_SCL3_MARK, PORT115_FN6, MSEL2CR_MSEL19_1), + PINMUX_DATA(HSI_RX_WAKE_MARK, PORT116_FN1), \ + PINMUX_DATA(BBIF1_RSYNC_MARK, PORT116_FN3), \ + PINMUX_DATA(PORT116_I2C_SDA2_MARK, PORT116_FN5, MSEL2CR_MSEL17_1), \ + PINMUX_DATA(PORT116_I2C_SDA3_MARK, PORT116_FN6, MSEL2CR_MSEL19_1), + PINMUX_DATA(HSI_RX_FLAG_MARK, PORT117_FN1), \ + PINMUX_DATA(BBIF1_SS1_MARK, PORT117_FN2), \ + PINMUX_DATA(BBIF1_FLOW_MARK, PORT117_FN3), + PINMUX_DATA(HSI_TX_FLAG_MARK, PORT118_FN1), + PINMUX_DATA(VIO_VD_MARK, PORT128_FN1), \ + PINMUX_DATA(PORT128_LCD2VSYN_MARK, PORT128_FN4, MSEL3CR_MSEL2_0), \ + PINMUX_DATA(VIO2_VD_MARK, PORT128_FN6, MSEL4CR_MSEL27_0), \ + PINMUX_DATA(LCD2D0_MARK, PORT128_FN7), + + PINMUX_DATA(VIO_HD_MARK, PORT129_FN1), \ + PINMUX_DATA(PORT129_LCD2HSYN_MARK, PORT129_FN4), \ + PINMUX_DATA(PORT129_LCD2CS__MARK, PORT129_FN5), \ + PINMUX_DATA(VIO2_HD_MARK, PORT129_FN6, MSEL4CR_MSEL27_0), \ + PINMUX_DATA(LCD2D1_MARK, PORT129_FN7), + PINMUX_DATA(VIO_D0_MARK, PORT130_FN1), \ + PINMUX_DATA(PORT130_MSIOF2_RXD_MARK, PORT130_FN3, MSEL4CR_MSEL11_0, + MSEL4CR_MSEL10_1), \ + PINMUX_DATA(LCD2D10_MARK, PORT130_FN7), + PINMUX_DATA(VIO_D1_MARK, PORT131_FN1), \ + PINMUX_DATA(PORT131_KEYOUT6_MARK, PORT131_FN2), \ + PINMUX_DATA(PORT131_MSIOF2_SS1_MARK, PORT131_FN3), \ + PINMUX_DATA(PORT131_KEYOUT11_MARK, PORT131_FN4), \ + PINMUX_DATA(LCD2D11_MARK, PORT131_FN7), + PINMUX_DATA(VIO_D2_MARK, PORT132_FN1), \ + PINMUX_DATA(PORT132_KEYOUT7_MARK, PORT132_FN2), \ + PINMUX_DATA(PORT132_MSIOF2_SS2_MARK, PORT132_FN3), \ + PINMUX_DATA(PORT132_KEYOUT10_MARK, PORT132_FN4), \ + PINMUX_DATA(LCD2D12_MARK, PORT132_FN7), + PINMUX_DATA(VIO_D3_MARK, PORT133_FN1), \ + PINMUX_DATA(MSIOF2_TSYNC_MARK, PORT133_FN3, MSEL4CR_MSEL11_0), \ + PINMUX_DATA(LCD2D13_MARK, PORT133_FN7), + PINMUX_DATA(VIO_D4_MARK, PORT134_FN1), \ + PINMUX_DATA(MSIOF2_TXD_MARK, PORT134_FN3, MSEL4CR_MSEL11_0), \ + PINMUX_DATA(LCD2D14_MARK, PORT134_FN7), + PINMUX_DATA(VIO_D5_MARK, PORT135_FN1), \ + PINMUX_DATA(MSIOF2_TSCK_MARK, PORT135_FN3, MSEL4CR_MSEL11_0), \ + PINMUX_DATA(LCD2D15_MARK, PORT135_FN7), + PINMUX_DATA(VIO_D6_MARK, PORT136_FN1), \ + PINMUX_DATA(PORT136_KEYOUT8_MARK, PORT136_FN2), \ + PINMUX_DATA(LCD2D16_MARK, PORT136_FN7), + PINMUX_DATA(VIO_D7_MARK, PORT137_FN1), \ + PINMUX_DATA(PORT137_KEYOUT9_MARK, PORT137_FN2), \ + PINMUX_DATA(LCD2D17_MARK, PORT137_FN7), + PINMUX_DATA(VIO_D8_MARK, PORT138_FN1), \ + PINMUX_DATA(PORT138_KEYOUT8_MARK, PORT138_FN2), \ + PINMUX_DATA(VIO2_D0_MARK, PORT138_FN6), \ + PINMUX_DATA(LCD2D6_MARK, PORT138_FN7), + PINMUX_DATA(VIO_D9_MARK, PORT139_FN1), \ + PINMUX_DATA(PORT139_KEYOUT9_MARK, PORT139_FN2), \ + PINMUX_DATA(VIO2_D1_MARK, PORT139_FN6), \ + PINMUX_DATA(LCD2D7_MARK, PORT139_FN7), + PINMUX_DATA(VIO_D10_MARK, PORT140_FN1), \ + PINMUX_DATA(TPU0TO2_MARK, PORT140_FN4), \ + PINMUX_DATA(VIO2_D2_MARK, PORT140_FN6), \ + PINMUX_DATA(LCD2D8_MARK, PORT140_FN7), + PINMUX_DATA(VIO_D11_MARK, PORT141_FN1), \ + PINMUX_DATA(TPU0TO3_MARK, PORT141_FN4), \ + PINMUX_DATA(VIO2_D3_MARK, PORT141_FN6), \ + PINMUX_DATA(LCD2D9_MARK, PORT141_FN7), + PINMUX_DATA(VIO_D12_MARK, PORT142_FN1), \ + PINMUX_DATA(PORT142_KEYOUT10_MARK, PORT142_FN2), \ + PINMUX_DATA(VIO2_D4_MARK, PORT142_FN6), \ + PINMUX_DATA(LCD2D2_MARK, PORT142_FN7), + PINMUX_DATA(VIO_D13_MARK, PORT143_FN1), \ + PINMUX_DATA(PORT143_KEYOUT11_MARK, PORT143_FN2), \ + PINMUX_DATA(PORT143_KEYOUT6_MARK, PORT143_FN3), \ + PINMUX_DATA(VIO2_D5_MARK, PORT143_FN6), \ + PINMUX_DATA(LCD2D3_MARK, PORT143_FN7), + PINMUX_DATA(VIO_D14_MARK, PORT144_FN1), \ + PINMUX_DATA(PORT144_KEYOUT7_MARK, PORT144_FN2), \ + PINMUX_DATA(VIO2_D6_MARK, PORT144_FN6), \ + PINMUX_DATA(LCD2D4_MARK, PORT144_FN7), + PINMUX_DATA(VIO_D15_MARK, PORT145_FN1), \ + PINMUX_DATA(TPU1TO3_MARK, PORT145_FN3), \ + PINMUX_DATA(PORT145_LCD2DISP_MARK, PORT145_FN4), \ + PINMUX_DATA(PORT145_LCD2RS_MARK, PORT145_FN5), \ + PINMUX_DATA(VIO2_D7_MARK, PORT145_FN6), \ + PINMUX_DATA(LCD2D5_MARK, PORT145_FN7), + PINMUX_DATA(VIO_CLK_MARK, PORT146_FN1), \ + PINMUX_DATA(LCD2DCK_MARK, PORT146_FN4), \ + PINMUX_DATA(PORT146_LCD2WR__MARK, PORT146_FN5), \ + PINMUX_DATA(VIO2_CLK_MARK, PORT146_FN6, MSEL4CR_MSEL27_0), \ + PINMUX_DATA(LCD2D18_MARK, PORT146_FN7), + PINMUX_DATA(VIO_FIELD_MARK, PORT147_FN1), \ + PINMUX_DATA(LCD2RD__MARK, PORT147_FN4), \ + PINMUX_DATA(VIO2_FIELD_MARK, PORT147_FN6, MSEL4CR_MSEL27_0), \ + PINMUX_DATA(LCD2D19_MARK, PORT147_FN7), + PINMUX_DATA(VIO_CKO_MARK, PORT148_FN1), + PINMUX_DATA(A27_MARK, PORT149_FN1), \ + PINMUX_DATA(PORT149_RDWR_MARK, PORT149_FN2), \ + PINMUX_DATA(MFG0_IN1_MARK, PORT149_FN3), \ + PINMUX_DATA(PORT149_KEYOUT9_MARK, PORT149_FN4), + PINMUX_DATA(MFG0_IN2_MARK, PORT150_FN3), + PINMUX_DATA(TS_SPSYNC3_MARK, PORT151_FN4), \ + PINMUX_DATA(MSIOF2_RSCK_MARK, PORT151_FN5), + PINMUX_DATA(TS_SDAT3_MARK, PORT152_FN4), \ + PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT152_FN5), + PINMUX_DATA(TPU1TO2_MARK, PORT153_FN3), \ + PINMUX_DATA(TS_SDEN3_MARK, PORT153_FN4), \ + PINMUX_DATA(PORT153_MSIOF2_SS1_MARK, PORT153_FN5), + PINMUX_DATA(SCIFA2_TXD1_MARK, PORT154_FN2, MSEL3CR_MSEL9_0), \ + PINMUX_DATA(MSIOF2_MCK0_MARK, PORT154_FN5), + PINMUX_DATA(SCIFA2_RXD1_MARK, PORT155_FN2, MSEL3CR_MSEL9_0), \ + PINMUX_DATA(MSIOF2_MCK1_MARK, PORT155_FN5), + PINMUX_DATA(SCIFA2_RTS1__MARK, PORT156_FN2, MSEL3CR_MSEL9_0), \ + PINMUX_DATA(PORT156_MSIOF2_SS2_MARK, PORT156_FN5), + PINMUX_DATA(SCIFA2_CTS1__MARK, PORT157_FN2, MSEL3CR_MSEL9_0), \ + PINMUX_DATA(PORT157_MSIOF2_RXD_MARK, PORT157_FN5, MSEL4CR_MSEL11_0, + MSEL4CR_MSEL10_0), + PINMUX_DATA(DINT__MARK, PORT158_FN1), \ + PINMUX_DATA(SCIFA2_SCK1_MARK, PORT158_FN2, MSEL3CR_MSEL9_0), \ + PINMUX_DATA(TS_SCK3_MARK, PORT158_FN4), + PINMUX_DATA(PORT159_SCIFB_SCK_MARK, PORT159_FN1, MSEL4CR_MSEL22_0), \ + PINMUX_DATA(PORT159_SCIFA5_SCK_MARK, PORT159_FN2, MSEL4CR_MSEL21_1), \ + PINMUX_DATA(NMI_MARK, PORT159_FN3), + PINMUX_DATA(PORT160_SCIFB_TXD_MARK, PORT160_FN1, MSEL4CR_MSEL22_0), \ + PINMUX_DATA(PORT160_SCIFA5_TXD_MARK, PORT160_FN2, MSEL4CR_MSEL21_1), + PINMUX_DATA(PORT161_SCIFB_CTS__MARK, PORT161_FN1, MSEL4CR_MSEL22_0), \ + PINMUX_DATA(PORT161_SCIFA5_CTS__MARK, PORT161_FN2, MSEL4CR_MSEL21_1), + PINMUX_DATA(PORT162_SCIFB_RXD_MARK, PORT162_FN1, MSEL4CR_MSEL22_0), \ + PINMUX_DATA(PORT162_SCIFA5_RXD_MARK, PORT162_FN2, MSEL4CR_MSEL21_1), + PINMUX_DATA(PORT163_SCIFB_RTS__MARK, PORT163_FN1, MSEL4CR_MSEL22_0), \ + PINMUX_DATA(PORT163_SCIFA5_RTS__MARK, PORT163_FN2, MSEL4CR_MSEL21_1), \ + PINMUX_DATA(TPU3TO0_MARK, PORT163_FN5), + PINMUX_DATA(LCDD0_MARK, PORT192_FN1), + PINMUX_DATA(LCDD1_MARK, PORT193_FN1), \ + PINMUX_DATA(PORT193_SCIFA5_CTS__MARK, PORT193_FN3, MSEL4CR_MSEL21_0, + MSEL4CR_MSEL20_1), \ + PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT193_FN5), + PINMUX_DATA(LCDD2_MARK, PORT194_FN1), \ + PINMUX_DATA(PORT194_SCIFA5_RTS__MARK, PORT194_FN3, MSEL4CR_MSEL21_0, + MSEL4CR_MSEL20_1), \ + PINMUX_DATA(BBIF2_TSCK1_MARK, PORT194_FN5), + PINMUX_DATA(LCDD3_MARK, PORT195_FN1), \ + PINMUX_DATA(PORT195_SCIFA5_RXD_MARK, PORT195_FN3, MSEL4CR_MSEL21_0, + MSEL4CR_MSEL20_1), \ + PINMUX_DATA(BBIF2_TXD1_MARK, PORT195_FN5), + PINMUX_DATA(LCDD4_MARK, PORT196_FN1), \ + PINMUX_DATA(PORT196_SCIFA5_TXD_MARK, PORT196_FN3, MSEL4CR_MSEL21_0, + MSEL4CR_MSEL20_1), + PINMUX_DATA(LCDD5_MARK, PORT197_FN1), \ + PINMUX_DATA(PORT197_SCIFA5_SCK_MARK, PORT197_FN3, MSEL4CR_MSEL21_0, + MSEL4CR_MSEL20_1), \ + PINMUX_DATA(MFG2_OUT2_MARK, PORT197_FN5), \ + PINMUX_DATA(TPU2TO1_MARK, PORT197_FN7), + PINMUX_DATA(LCDD6_MARK, PORT198_FN1), + PINMUX_DATA(LCDD7_MARK, PORT199_FN1), \ + PINMUX_DATA(TPU4TO1_MARK, PORT199_FN2), \ + PINMUX_DATA(MFG4_OUT2_MARK, PORT199_FN5), + PINMUX_DATA(LCDD8_MARK, PORT200_FN1), \ + PINMUX_DATA(D16_MARK, PORT200_FN6), + PINMUX_DATA(LCDD9_MARK, PORT201_FN1), \ + PINMUX_DATA(D17_MARK, PORT201_FN6), + PINMUX_DATA(LCDD10_MARK, PORT202_FN1), \ + PINMUX_DATA(D18_MARK, PORT202_FN6), + PINMUX_DATA(LCDD11_MARK, PORT203_FN1), \ + PINMUX_DATA(D19_MARK, PORT203_FN6), + PINMUX_DATA(LCDD12_MARK, PORT204_FN1), \ + PINMUX_DATA(D20_MARK, PORT204_FN6), + PINMUX_DATA(LCDD13_MARK, PORT205_FN1), \ + PINMUX_DATA(D21_MARK, PORT205_FN6), + PINMUX_DATA(LCDD14_MARK, PORT206_FN1), \ + PINMUX_DATA(D22_MARK, PORT206_FN6), + PINMUX_DATA(LCDD15_MARK, PORT207_FN1), \ + PINMUX_DATA(PORT207_MSIOF0L_SS1_MARK, PORT207_FN2, MSEL3CR_MSEL11_1), \ + PINMUX_DATA(D23_MARK, PORT207_FN6), + PINMUX_DATA(LCDD16_MARK, PORT208_FN1), \ + PINMUX_DATA(PORT208_MSIOF0L_SS2_MARK, PORT208_FN2, MSEL3CR_MSEL11_1), \ + PINMUX_DATA(D24_MARK, PORT208_FN6), + PINMUX_DATA(LCDD17_MARK, PORT209_FN1), \ + PINMUX_DATA(D25_MARK, PORT209_FN6), + PINMUX_DATA(LCDD18_MARK, PORT210_FN1), \ + PINMUX_DATA(DREQ2_MARK, PORT210_FN2), \ + PINMUX_DATA(PORT210_MSIOF0L_SS1_MARK, PORT210_FN5, MSEL3CR_MSEL11_1), \ + PINMUX_DATA(D26_MARK, PORT210_FN6), + PINMUX_DATA(LCDD19_MARK, PORT211_FN1), \ + PINMUX_DATA(PORT211_MSIOF0L_SS2_MARK, PORT211_FN5, MSEL3CR_MSEL11_1), \ + PINMUX_DATA(D27_MARK, PORT211_FN6), + PINMUX_DATA(LCDD20_MARK, PORT212_FN1), \ + PINMUX_DATA(TS_SPSYNC1_MARK, PORT212_FN2), \ + PINMUX_DATA(MSIOF0L_MCK0_MARK, PORT212_FN5, MSEL3CR_MSEL11_1), \ + PINMUX_DATA(D28_MARK, PORT212_FN6), + PINMUX_DATA(LCDD21_MARK, PORT213_FN1), \ + PINMUX_DATA(TS_SDAT1_MARK, PORT213_FN2), \ + PINMUX_DATA(MSIOF0L_MCK1_MARK, PORT213_FN5, MSEL3CR_MSEL11_1), \ + PINMUX_DATA(D29_MARK, PORT213_FN6), + PINMUX_DATA(LCDD22_MARK, PORT214_FN1), \ + PINMUX_DATA(TS_SDEN1_MARK, PORT214_FN2), \ + PINMUX_DATA(MSIOF0L_RSCK_MARK, PORT214_FN5, MSEL3CR_MSEL11_1), \ + PINMUX_DATA(D30_MARK, PORT214_FN6), + PINMUX_DATA(LCDD23_MARK, PORT215_FN1), \ + PINMUX_DATA(TS_SCK1_MARK, PORT215_FN2), \ + PINMUX_DATA(MSIOF0L_RSYNC_MARK, PORT215_FN5, MSEL3CR_MSEL11_1), \ + PINMUX_DATA(D31_MARK, PORT215_FN6), + PINMUX_DATA(LCDDCK_MARK, PORT216_FN1), \ + PINMUX_DATA(LCDWR__MARK, PORT216_FN2), + PINMUX_DATA(LCDRD__MARK, PORT217_FN1), \ + PINMUX_DATA(DACK2_MARK, PORT217_FN2), \ + PINMUX_DATA(PORT217_LCD2RS_MARK, PORT217_FN3), \ + PINMUX_DATA(MSIOF0L_TSYNC_MARK, PORT217_FN5, MSEL3CR_MSEL11_1), \ + PINMUX_DATA(VIO2_FIELD3_MARK, PORT217_FN6, MSEL4CR_MSEL27_1, + MSEL4CR_MSEL26_1), \ + PINMUX_DATA(PORT217_LCD2DISP_MARK, PORT217_FN7), + PINMUX_DATA(LCDHSYN_MARK, PORT218_FN1), \ + PINMUX_DATA(LCDCS__MARK, PORT218_FN2), \ + PINMUX_DATA(LCDCS2__MARK, PORT218_FN3), \ + PINMUX_DATA(DACK3_MARK, PORT218_FN4), \ + PINMUX_DATA(PORT218_VIO_CKOR_MARK, PORT218_FN5), + PINMUX_DATA(LCDDISP_MARK, PORT219_FN1), \ + PINMUX_DATA(LCDRS_MARK, PORT219_FN2), \ + PINMUX_DATA(PORT219_LCD2WR__MARK, PORT219_FN3), \ + PINMUX_DATA(DREQ3_MARK, PORT219_FN4), \ + PINMUX_DATA(MSIOF0L_TSCK_MARK, PORT219_FN5, MSEL3CR_MSEL11_1), \ + PINMUX_DATA(VIO2_CLK3_MARK, PORT219_FN6, MSEL4CR_MSEL27_1, + MSEL4CR_MSEL26_1), \ + PINMUX_DATA(LCD2DCK_2_MARK, PORT219_FN7), + PINMUX_DATA(LCDVSYN_MARK, PORT220_FN1), \ + PINMUX_DATA(LCDVSYN2_MARK, PORT220_FN2), + PINMUX_DATA(LCDLCLK_MARK, PORT221_FN1), \ + PINMUX_DATA(DREQ1_MARK, PORT221_FN2), \ + PINMUX_DATA(PORT221_LCD2CS__MARK, PORT221_FN3), \ + PINMUX_DATA(PWEN_MARK, PORT221_FN4), \ + PINMUX_DATA(MSIOF0L_RXD_MARK, PORT221_FN5, MSEL3CR_MSEL11_1), \ + PINMUX_DATA(VIO2_HD3_MARK, PORT221_FN6, MSEL4CR_MSEL27_1, + MSEL4CR_MSEL26_1), \ + PINMUX_DATA(PORT221_LCD2HSYN_MARK, PORT221_FN7), + PINMUX_DATA(LCDDON_MARK, PORT222_FN1), \ + PINMUX_DATA(LCDDON2_MARK, PORT222_FN2), \ + PINMUX_DATA(DACK1_MARK, PORT222_FN3), \ + PINMUX_DATA(OVCN_MARK, PORT222_FN4), \ + PINMUX_DATA(MSIOF0L_TXD_MARK, PORT222_FN5, MSEL3CR_MSEL11_1), \ + PINMUX_DATA(VIO2_VD3_MARK, PORT222_FN6, MSEL4CR_MSEL27_1, + MSEL4CR_MSEL26_1), \ + PINMUX_DATA(PORT222_LCD2VSYN_MARK, PORT222_FN7, MSEL3CR_MSEL2_1), + + PINMUX_DATA(SCIFA1_TXD_MARK, PORT225_FN2), \ + PINMUX_DATA(OVCN2_MARK, PORT225_FN4), + PINMUX_DATA(EXTLP_MARK, PORT226_FN1), \ + PINMUX_DATA(SCIFA1_SCK_MARK, PORT226_FN2), \ + PINMUX_DATA(PORT226_VIO_CKO2_MARK, PORT226_FN5), + PINMUX_DATA(SCIFA1_RTS__MARK, PORT227_FN2), \ + PINMUX_DATA(IDIN_MARK, PORT227_FN4), + PINMUX_DATA(SCIFA1_RXD_MARK, PORT228_FN2), + PINMUX_DATA(SCIFA1_CTS__MARK, PORT229_FN2), \ + PINMUX_DATA(MFG1_IN1_MARK, PORT229_FN3), + PINMUX_DATA(MSIOF1_TXD_MARK, PORT230_FN1), \ + PINMUX_DATA(SCIFA2_TXD2_MARK, PORT230_FN2, MSEL3CR_MSEL9_1), + PINMUX_DATA(MSIOF1_TSYNC_MARK, PORT231_FN1), \ + PINMUX_DATA(SCIFA2_CTS2__MARK, PORT231_FN2, MSEL3CR_MSEL9_1), + PINMUX_DATA(MSIOF1_TSCK_MARK, PORT232_FN1), \ + PINMUX_DATA(SCIFA2_SCK2_MARK, PORT232_FN2, MSEL3CR_MSEL9_1), + PINMUX_DATA(MSIOF1_RXD_MARK, PORT233_FN1), \ + PINMUX_DATA(SCIFA2_RXD2_MARK, PORT233_FN2, MSEL3CR_MSEL9_1), + PINMUX_DATA(MSIOF1_RSCK_MARK, PORT234_FN1), \ + PINMUX_DATA(SCIFA2_RTS2__MARK, PORT234_FN2, MSEL3CR_MSEL9_1), \ + PINMUX_DATA(VIO2_CLK2_MARK, PORT234_FN6, MSEL4CR_MSEL27_1, + MSEL4CR_MSEL26_0), \ + PINMUX_DATA(LCD2D20_MARK, PORT234_FN7), + PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT235_FN1), \ + PINMUX_DATA(MFG1_IN2_MARK, PORT235_FN3), \ + PINMUX_DATA(VIO2_VD2_MARK, PORT235_FN6, MSEL4CR_MSEL27_1, + MSEL4CR_MSEL26_0), \ + PINMUX_DATA(LCD2D21_MARK, PORT235_FN7), + PINMUX_DATA(MSIOF1_MCK0_MARK, PORT236_FN1), \ + PINMUX_DATA(PORT236_I2C_SDA2_MARK, PORT236_FN2, MSEL2CR_MSEL17_0, + MSEL2CR_MSEL16_0), + PINMUX_DATA(MSIOF1_MCK1_MARK, PORT237_FN1), \ + PINMUX_DATA(PORT237_I2C_SCL2_MARK, PORT237_FN2, MSEL2CR_MSEL17_0, + MSEL2CR_MSEL16_0), + PINMUX_DATA(MSIOF1_SS1_MARK, PORT238_FN1), \ + PINMUX_DATA(VIO2_FIELD2_MARK, PORT238_FN6, MSEL4CR_MSEL27_1, + MSEL4CR_MSEL26_0), \ + PINMUX_DATA(LCD2D22_MARK, PORT238_FN7), + PINMUX_DATA(MSIOF1_SS2_MARK, PORT239_FN1), \ + PINMUX_DATA(VIO2_HD2_MARK, PORT239_FN6, MSEL4CR_MSEL27_1, + MSEL4CR_MSEL26_0), \ + PINMUX_DATA(LCD2D23_MARK, PORT239_FN7), + PINMUX_DATA(SCIFA6_TXD_MARK, PORT240_FN1), + PINMUX_DATA(PORT241_IRDA_OUT_MARK, PORT241_FN1, MSEL4CR_MSEL19_0), \ + PINMUX_DATA(PORT241_IROUT_MARK, PORT241_FN2), \ + PINMUX_DATA(MFG4_OUT1_MARK, PORT241_FN3), \ + PINMUX_DATA(TPU4TO0_MARK, PORT241_FN4), + PINMUX_DATA(PORT242_IRDA_IN_MARK, PORT242_FN1, MSEL4CR_MSEL19_0), \ + PINMUX_DATA(MFG4_IN2_MARK, PORT242_FN3), + PINMUX_DATA(PORT243_IRDA_FIRSEL_MARK, PORT243_FN1, MSEL4CR_MSEL19_0), \ + PINMUX_DATA(PORT243_VIO_CKO2_MARK, PORT243_FN2), + PINMUX_DATA(PORT244_SCIFA5_CTS__MARK, PORT244_FN1, MSEL4CR_MSEL21_0, + MSEL4CR_MSEL20_0), \ + PINMUX_DATA(MFG2_IN1_MARK, PORT244_FN2), \ + PINMUX_DATA(PORT244_SCIFB_CTS__MARK, PORT244_FN3, MSEL4CR_MSEL22_1), \ + PINMUX_DATA(MSIOF2R_RXD_MARK, PORT244_FN7, MSEL4CR_MSEL11_1), + PINMUX_DATA(PORT245_SCIFA5_RTS__MARK, PORT245_FN1, MSEL4CR_MSEL21_0, + MSEL4CR_MSEL20_0), \ + PINMUX_DATA(MFG2_IN2_MARK, PORT245_FN2), \ + PINMUX_DATA(PORT245_SCIFB_RTS__MARK, PORT245_FN3, MSEL4CR_MSEL22_1), \ + PINMUX_DATA(MSIOF2R_TXD_MARK, PORT245_FN7, MSEL4CR_MSEL11_1), + PINMUX_DATA(PORT246_SCIFA5_RXD_MARK, PORT246_FN1, MSEL4CR_MSEL21_0, + MSEL4CR_MSEL20_0), \ + PINMUX_DATA(MFG1_OUT1_MARK, PORT246_FN2), \ + PINMUX_DATA(PORT246_SCIFB_RXD_MARK, PORT246_FN3, MSEL4CR_MSEL22_1), \ + PINMUX_DATA(TPU1TO0_MARK, PORT246_FN4), + PINMUX_DATA(PORT247_SCIFA5_TXD_MARK, PORT247_FN1, MSEL4CR_MSEL21_0, + MSEL4CR_MSEL20_0), \ + PINMUX_DATA(MFG3_OUT2_MARK, PORT247_FN2), \ + PINMUX_DATA(PORT247_SCIFB_TXD_MARK, PORT247_FN3, MSEL4CR_MSEL22_1), \ + PINMUX_DATA(TPU3TO1_MARK, PORT247_FN4), + PINMUX_DATA(PORT248_SCIFA5_SCK_MARK, PORT248_FN1, MSEL4CR_MSEL21_0, + MSEL4CR_MSEL20_0), \ + PINMUX_DATA(MFG2_OUT1_MARK, PORT248_FN2), \ + PINMUX_DATA(PORT248_SCIFB_SCK_MARK, PORT248_FN3, MSEL4CR_MSEL22_1), \ + PINMUX_DATA(TPU2TO0_MARK, PORT248_FN4), \ + PINMUX_DATA(PORT248_I2C_SCL3_MARK, PORT248_FN5, MSEL2CR_MSEL19_0, + MSEL2CR_MSEL18_0), \ + PINMUX_DATA(MSIOF2R_TSCK_MARK, PORT248_FN7, MSEL4CR_MSEL11_1), + PINMUX_DATA(PORT249_IROUT_MARK, PORT249_FN1), \ + PINMUX_DATA(MFG4_IN1_MARK, PORT249_FN2), \ + PINMUX_DATA(PORT249_I2C_SDA3_MARK, PORT249_FN5, MSEL2CR_MSEL19_0, + MSEL2CR_MSEL18_0), \ + PINMUX_DATA(MSIOF2R_TSYNC_MARK, PORT249_FN7, MSEL4CR_MSEL11_1), + PINMUX_DATA(SDHICLK0_MARK, PORT250_FN1), + PINMUX_DATA(SDHICD0_MARK, PORT251_FN1), + PINMUX_DATA(SDHID0_0_MARK, PORT252_FN1), + PINMUX_DATA(SDHID0_1_MARK, PORT253_FN1), + PINMUX_DATA(SDHID0_2_MARK, PORT254_FN1), + PINMUX_DATA(SDHID0_3_MARK, PORT255_FN1), + PINMUX_DATA(SDHICMD0_MARK, PORT256_FN1), + PINMUX_DATA(SDHIWP0_MARK, PORT257_FN1), + PINMUX_DATA(SDHICLK1_MARK, PORT258_FN1), + PINMUX_DATA(SDHID1_0_MARK, PORT259_FN1), \ + PINMUX_DATA(TS_SPSYNC2_MARK, PORT259_FN3), + PINMUX_DATA(SDHID1_1_MARK, PORT260_FN1), \ + PINMUX_DATA(TS_SDAT2_MARK, PORT260_FN3), + PINMUX_DATA(SDHID1_2_MARK, PORT261_FN1), \ + PINMUX_DATA(TS_SDEN2_MARK, PORT261_FN3), + PINMUX_DATA(SDHID1_3_MARK, PORT262_FN1), \ + PINMUX_DATA(TS_SCK2_MARK, PORT262_FN3), + PINMUX_DATA(SDHICMD1_MARK, PORT263_FN1), + PINMUX_DATA(SDHICLK2_MARK, PORT264_FN1), + PINMUX_DATA(SDHID2_0_MARK, PORT265_FN1), \ + PINMUX_DATA(TS_SPSYNC4_MARK, PORT265_FN3), + PINMUX_DATA(SDHID2_1_MARK, PORT266_FN1), \ + PINMUX_DATA(TS_SDAT4_MARK, PORT266_FN3), + PINMUX_DATA(SDHID2_2_MARK, PORT267_FN1), \ + PINMUX_DATA(TS_SDEN4_MARK, PORT267_FN3), + PINMUX_DATA(SDHID2_3_MARK, PORT268_FN1), \ + PINMUX_DATA(TS_SCK4_MARK, PORT268_FN3), + PINMUX_DATA(SDHICMD2_MARK, PORT269_FN1), + PINMUX_DATA(MMCCLK0_MARK, PORT270_FN1, MSEL4CR_MSEL15_0), + PINMUX_DATA(MMCD0_0_MARK, PORT271_FN1, PORT271_IN_PU, + MSEL4CR_MSEL15_0), + PINMUX_DATA(MMCD0_1_MARK, PORT272_FN1, PORT272_IN_PU, + MSEL4CR_MSEL15_0), + PINMUX_DATA(MMCD0_2_MARK, PORT273_FN1, PORT273_IN_PU, + MSEL4CR_MSEL15_0), + PINMUX_DATA(MMCD0_3_MARK, PORT274_FN1, PORT274_IN_PU, + MSEL4CR_MSEL15_0), + PINMUX_DATA(MMCD0_4_MARK, PORT275_FN1, PORT275_IN_PU, + MSEL4CR_MSEL15_0), \ + PINMUX_DATA(TS_SPSYNC5_MARK, PORT275_FN3), + PINMUX_DATA(MMCD0_5_MARK, PORT276_FN1, PORT276_IN_PU, + MSEL4CR_MSEL15_0), \ + PINMUX_DATA(TS_SDAT5_MARK, PORT276_FN3), + PINMUX_DATA(MMCD0_6_MARK, PORT277_FN1, PORT277_IN_PU, + MSEL4CR_MSEL15_0), \ + PINMUX_DATA(TS_SDEN5_MARK, PORT277_FN3), + PINMUX_DATA(MMCD0_7_MARK, PORT278_FN1, PORT278_IN_PU, + MSEL4CR_MSEL15_0), \ + PINMUX_DATA(TS_SCK5_MARK, PORT278_FN3), + PINMUX_DATA(MMCCMD0_MARK, PORT279_FN1, PORT279_IN_PU, + MSEL4CR_MSEL15_0), + PINMUX_DATA(RESETOUTS__MARK, PORT281_FN1), \ + PINMUX_DATA(EXTAL2OUT_MARK, PORT281_FN2), + PINMUX_DATA(MCP_WAIT__MCP_FRB_MARK, PORT288_FN1), + PINMUX_DATA(MCP_CKO_MARK, PORT289_FN1), \ + PINMUX_DATA(MMCCLK1_MARK, PORT289_FN2, MSEL4CR_MSEL15_1), + PINMUX_DATA(MCP_D15_MCP_NAF15_MARK, PORT290_FN1), + PINMUX_DATA(MCP_D14_MCP_NAF14_MARK, PORT291_FN1), + PINMUX_DATA(MCP_D13_MCP_NAF13_MARK, PORT292_FN1), + PINMUX_DATA(MCP_D12_MCP_NAF12_MARK, PORT293_FN1), + PINMUX_DATA(MCP_D11_MCP_NAF11_MARK, PORT294_FN1), + PINMUX_DATA(MCP_D10_MCP_NAF10_MARK, PORT295_FN1), + PINMUX_DATA(MCP_D9_MCP_NAF9_MARK, PORT296_FN1), + PINMUX_DATA(MCP_D8_MCP_NAF8_MARK, PORT297_FN1), \ + PINMUX_DATA(MMCCMD1_MARK, PORT297_FN2, MSEL4CR_MSEL15_1), + PINMUX_DATA(MCP_D7_MCP_NAF7_MARK, PORT298_FN1), \ + PINMUX_DATA(MMCD1_7_MARK, PORT298_FN2, MSEL4CR_MSEL15_1), + + PINMUX_DATA(MCP_D6_MCP_NAF6_MARK, PORT299_FN1), \ + PINMUX_DATA(MMCD1_6_MARK, PORT299_FN2, MSEL4CR_MSEL15_1), + PINMUX_DATA(MCP_D5_MCP_NAF5_MARK, PORT300_FN1), \ + PINMUX_DATA(MMCD1_5_MARK, PORT300_FN2, MSEL4CR_MSEL15_1), + PINMUX_DATA(MCP_D4_MCP_NAF4_MARK, PORT301_FN1), \ + PINMUX_DATA(MMCD1_4_MARK, PORT301_FN2, MSEL4CR_MSEL15_1), + PINMUX_DATA(MCP_D3_MCP_NAF3_MARK, PORT302_FN1), \ + PINMUX_DATA(MMCD1_3_MARK, PORT302_FN2, MSEL4CR_MSEL15_1), + PINMUX_DATA(MCP_D2_MCP_NAF2_MARK, PORT303_FN1), \ + PINMUX_DATA(MMCD1_2_MARK, PORT303_FN2, MSEL4CR_MSEL15_1), + PINMUX_DATA(MCP_D1_MCP_NAF1_MARK, PORT304_FN1), \ + PINMUX_DATA(MMCD1_1_MARK, PORT304_FN2, MSEL4CR_MSEL15_1), + PINMUX_DATA(MCP_D0_MCP_NAF0_MARK, PORT305_FN1), \ + PINMUX_DATA(MMCD1_0_MARK, PORT305_FN2, MSEL4CR_MSEL15_1), + PINMUX_DATA(MCP_NBRSTOUT__MARK, PORT306_FN1), + PINMUX_DATA(MCP_WE0__MCP_FWE_MARK, PORT309_FN1), \ + PINMUX_DATA(MCP_RDWR_MCP_FWE_MARK, PORT309_FN2), + + /* MSEL2 special cases */ + PINMUX_DATA(TSIF2_TS_XX1_MARK, MSEL2CR_MSEL14_0, MSEL2CR_MSEL13_0, + MSEL2CR_MSEL12_0), + PINMUX_DATA(TSIF2_TS_XX2_MARK, MSEL2CR_MSEL14_0, MSEL2CR_MSEL13_0, + MSEL2CR_MSEL12_1), + PINMUX_DATA(TSIF2_TS_XX3_MARK, MSEL2CR_MSEL14_0, MSEL2CR_MSEL13_1, + MSEL2CR_MSEL12_0), + PINMUX_DATA(TSIF2_TS_XX4_MARK, MSEL2CR_MSEL14_0, MSEL2CR_MSEL13_1, + MSEL2CR_MSEL12_1), + PINMUX_DATA(TSIF2_TS_XX5_MARK, MSEL2CR_MSEL14_1, MSEL2CR_MSEL13_0, + MSEL2CR_MSEL12_0), + PINMUX_DATA(TSIF1_TS_XX1_MARK, MSEL2CR_MSEL11_0, MSEL2CR_MSEL10_0, + MSEL2CR_MSEL9_0), + PINMUX_DATA(TSIF1_TS_XX2_MARK, MSEL2CR_MSEL11_0, MSEL2CR_MSEL10_0, + MSEL2CR_MSEL9_1), + PINMUX_DATA(TSIF1_TS_XX3_MARK, MSEL2CR_MSEL11_0, MSEL2CR_MSEL10_1, + MSEL2CR_MSEL9_0), + PINMUX_DATA(TSIF1_TS_XX4_MARK, MSEL2CR_MSEL11_0, MSEL2CR_MSEL10_1, + MSEL2CR_MSEL9_1), + PINMUX_DATA(TSIF1_TS_XX5_MARK, MSEL2CR_MSEL11_1, MSEL2CR_MSEL10_0, + MSEL2CR_MSEL9_0), + PINMUX_DATA(TSIF0_TS_XX1_MARK, MSEL2CR_MSEL8_0, MSEL2CR_MSEL7_0, + MSEL2CR_MSEL6_0), + PINMUX_DATA(TSIF0_TS_XX2_MARK, MSEL2CR_MSEL8_0, MSEL2CR_MSEL7_0, + MSEL2CR_MSEL6_1), + PINMUX_DATA(TSIF0_TS_XX3_MARK, MSEL2CR_MSEL8_0, MSEL2CR_MSEL7_1, + MSEL2CR_MSEL6_0), + PINMUX_DATA(TSIF0_TS_XX4_MARK, MSEL2CR_MSEL8_0, MSEL2CR_MSEL7_1, + MSEL2CR_MSEL6_1), + PINMUX_DATA(TSIF0_TS_XX5_MARK, MSEL2CR_MSEL8_1, MSEL2CR_MSEL7_0, + MSEL2CR_MSEL6_0), + PINMUX_DATA(MST1_TS_XX1_MARK, MSEL2CR_MSEL5_0, MSEL2CR_MSEL4_0, + MSEL2CR_MSEL3_0), + PINMUX_DATA(MST1_TS_XX2_MARK, MSEL2CR_MSEL5_0, MSEL2CR_MSEL4_0, + MSEL2CR_MSEL3_1), + PINMUX_DATA(MST1_TS_XX3_MARK, MSEL2CR_MSEL5_0, MSEL2CR_MSEL4_1, + MSEL2CR_MSEL3_0), + PINMUX_DATA(MST1_TS_XX4_MARK, MSEL2CR_MSEL5_0, MSEL2CR_MSEL4_1, + MSEL2CR_MSEL3_1), + PINMUX_DATA(MST1_TS_XX5_MARK, MSEL2CR_MSEL5_1, MSEL2CR_MSEL4_0, + MSEL2CR_MSEL3_0), + PINMUX_DATA(MST0_TS_XX1_MARK, MSEL2CR_MSEL2_0, MSEL2CR_MSEL1_0, + MSEL2CR_MSEL0_0), + PINMUX_DATA(MST0_TS_XX2_MARK, MSEL2CR_MSEL2_0, MSEL2CR_MSEL1_0, + MSEL2CR_MSEL0_1), + PINMUX_DATA(MST0_TS_XX3_MARK, MSEL2CR_MSEL2_0, MSEL2CR_MSEL1_1, + MSEL2CR_MSEL0_0), + PINMUX_DATA(MST0_TS_XX4_MARK, MSEL2CR_MSEL2_0, MSEL2CR_MSEL1_1, + MSEL2CR_MSEL0_1), + PINMUX_DATA(MST0_TS_XX5_MARK, MSEL2CR_MSEL2_1, MSEL2CR_MSEL1_0, + MSEL2CR_MSEL0_0), + + /* MSEL3 special cases */ + PINMUX_DATA(SDHI0_VCCQ_MC0_ON_MARK, MSEL3CR_MSEL28_1), + PINMUX_DATA(SDHI0_VCCQ_MC0_OFF_MARK, MSEL3CR_MSEL28_0), + PINMUX_DATA(DEBUG_MON_VIO_MARK, MSEL3CR_MSEL15_0), + PINMUX_DATA(DEBUG_MON_LCDD_MARK, MSEL3CR_MSEL15_1), + PINMUX_DATA(LCDC_LCDC0_MARK, MSEL3CR_MSEL6_0), + PINMUX_DATA(LCDC_LCDC1_MARK, MSEL3CR_MSEL6_1), + + /* MSEL4 special cases */ + PINMUX_DATA(IRQ9_MEM_INT_MARK, MSEL4CR_MSEL29_0), + PINMUX_DATA(IRQ9_MCP_INT_MARK, MSEL4CR_MSEL29_1), + PINMUX_DATA(A11_MARK, MSEL4CR_MSEL13_0, MSEL4CR_MSEL12_0), + PINMUX_DATA(KEYOUT8_MARK, MSEL4CR_MSEL13_0, MSEL4CR_MSEL12_1), + PINMUX_DATA(TPU4TO3_MARK, MSEL4CR_MSEL13_1, MSEL4CR_MSEL12_0), + PINMUX_DATA(RESETA_N_PU_ON_MARK, MSEL4CR_MSEL4_0), + PINMUX_DATA(RESETA_N_PU_OFF_MARK, MSEL4CR_MSEL4_1), + PINMUX_DATA(EDBGREQ_PD_MARK, MSEL4CR_MSEL1_0), + PINMUX_DATA(EDBGREQ_PU_MARK, MSEL4CR_MSEL1_1), + + /* Functions with pull-ups */ + PINMUX_DATA(KEYIN0_PU_MARK, PORT66_FN2, PORT66_IN_PU), + PINMUX_DATA(KEYIN1_PU_MARK, PORT67_FN2, PORT67_IN_PU), + PINMUX_DATA(KEYIN2_PU_MARK, PORT68_FN2, PORT68_IN_PU), + PINMUX_DATA(KEYIN3_PU_MARK, PORT69_FN2, PORT69_IN_PU), + PINMUX_DATA(KEYIN4_PU_MARK, PORT70_FN2, PORT70_IN_PU), + PINMUX_DATA(KEYIN5_PU_MARK, PORT71_FN2, PORT71_IN_PU), + PINMUX_DATA(KEYIN6_PU_MARK, PORT72_FN2, PORT72_IN_PU), + PINMUX_DATA(KEYIN7_PU_MARK, PORT73_FN2, PORT73_IN_PU), + + PINMUX_DATA(SDHICD0_PU_MARK, PORT251_FN1, PORT251_IN_PU), + PINMUX_DATA(SDHID0_0_PU_MARK, PORT252_FN1, PORT252_IN_PU), + PINMUX_DATA(SDHID0_1_PU_MARK, PORT253_FN1, PORT253_IN_PU), + PINMUX_DATA(SDHID0_2_PU_MARK, PORT254_FN1, PORT254_IN_PU), + PINMUX_DATA(SDHID0_3_PU_MARK, PORT255_FN1, PORT255_IN_PU), + PINMUX_DATA(SDHICMD0_PU_MARK, PORT256_FN1, PORT256_IN_PU), + PINMUX_DATA(SDHIWP0_PU_MARK, PORT257_FN1, PORT256_IN_PU), + PINMUX_DATA(SDHID1_0_PU_MARK, PORT259_FN1, PORT259_IN_PU), + PINMUX_DATA(SDHID1_1_PU_MARK, PORT260_FN1, PORT260_IN_PU), + PINMUX_DATA(SDHID1_2_PU_MARK, PORT261_FN1, PORT261_IN_PU), + PINMUX_DATA(SDHID1_3_PU_MARK, PORT262_FN1, PORT262_IN_PU), + PINMUX_DATA(SDHICMD1_PU_MARK, PORT263_FN1, PORT263_IN_PU), + PINMUX_DATA(SDHID2_0_PU_MARK, PORT265_FN1, PORT265_IN_PU), + PINMUX_DATA(SDHID2_1_PU_MARK, PORT266_FN1, PORT266_IN_PU), + PINMUX_DATA(SDHID2_2_PU_MARK, PORT267_FN1, PORT267_IN_PU), + PINMUX_DATA(SDHID2_3_PU_MARK, PORT268_FN1, PORT268_IN_PU), + PINMUX_DATA(SDHICMD2_PU_MARK, PORT269_FN1, PORT269_IN_PU), + + PINMUX_DATA(MMCCMD0_PU_MARK, PORT279_FN1, PORT279_IN_PU, + MSEL4CR_MSEL15_0), + PINMUX_DATA(MMCCMD1_PU_MARK, PORT297_FN2, PORT297_IN_PU, + MSEL4CR_MSEL15_1), + + PINMUX_DATA(MMCD0_0_PU_MARK, + PORT271_FN1, PORT271_IN_PU, MSEL4CR_MSEL15_0), + PINMUX_DATA(MMCD0_1_PU_MARK, + PORT272_FN1, PORT272_IN_PU, MSEL4CR_MSEL15_0), + PINMUX_DATA(MMCD0_2_PU_MARK, + PORT273_FN1, PORT273_IN_PU, MSEL4CR_MSEL15_0), + PINMUX_DATA(MMCD0_3_PU_MARK, + PORT274_FN1, PORT274_IN_PU, MSEL4CR_MSEL15_0), + PINMUX_DATA(MMCD0_4_PU_MARK, + PORT275_FN1, PORT275_IN_PU, MSEL4CR_MSEL15_0), + PINMUX_DATA(MMCD0_5_PU_MARK, + PORT276_FN1, PORT276_IN_PU, MSEL4CR_MSEL15_0), + PINMUX_DATA(MMCD0_6_PU_MARK, + PORT277_FN1, PORT277_IN_PU, MSEL4CR_MSEL15_0), + PINMUX_DATA(MMCD0_7_PU_MARK, + PORT278_FN1, PORT278_IN_PU, MSEL4CR_MSEL15_0), + + PINMUX_DATA(FSIBISLD_PU_MARK, PORT39_FN1, PORT39_IN_PU), + PINMUX_DATA(FSIACK_PU_MARK, PORT49_FN1, PORT49_IN_PU), + PINMUX_DATA(FSIAILR_PU_MARK, PORT50_FN5, PORT50_IN_PU), + PINMUX_DATA(FSIAIBT_PU_MARK, PORT51_FN5, PORT51_IN_PU), + PINMUX_DATA(FSIAISLD_PU_MARK, PORT55_FN1, PORT55_IN_PU), +}; + +static struct pinmux_gpio pinmux_gpios[] = { + GPIO_PORT_ALL(), + + /* Table 25-1 (Functions 0-7) */ + GPIO_FN(VBUS_0), + GPIO_FN(GPI0), + GPIO_FN(GPI1), + GPIO_FN(GPI2), + GPIO_FN(GPI3), + GPIO_FN(GPI4), + GPIO_FN(GPI5), + GPIO_FN(GPI6), + GPIO_FN(GPI7), + GPIO_FN(SCIFA7_RXD), + GPIO_FN(SCIFA7_CTS_), + GPIO_FN(GPO7), \ + GPIO_FN(MFG0_OUT2), + GPIO_FN(GPO6), \ + GPIO_FN(MFG1_OUT2), + GPIO_FN(GPO5), \ + GPIO_FN(SCIFA0_SCK), \ + GPIO_FN(FSICOSLDT3), \ + GPIO_FN(PORT16_VIO_CKOR), + GPIO_FN(SCIFA0_TXD), + GPIO_FN(SCIFA7_TXD), + GPIO_FN(SCIFA7_RTS_), \ + GPIO_FN(PORT19_VIO_CKO2), + GPIO_FN(GPO0), + GPIO_FN(GPO1), + GPIO_FN(GPO2), \ + GPIO_FN(STATUS0), + GPIO_FN(GPO3), \ + GPIO_FN(STATUS1), + GPIO_FN(GPO4), \ + GPIO_FN(STATUS2), + GPIO_FN(VINT), + GPIO_FN(TCKON), + GPIO_FN(XDVFS1), \ + GPIO_FN(PORT27_I2C_SCL2), \ + GPIO_FN(PORT27_I2C_SCL3), \ + GPIO_FN(MFG0_OUT1), \ + GPIO_FN(PORT27_IROUT), + GPIO_FN(XDVFS2), \ + GPIO_FN(PORT28_I2C_SDA2), \ + GPIO_FN(PORT28_I2C_SDA3), \ + GPIO_FN(PORT28_TPU1TO1), + GPIO_FN(SIM_RST), \ + GPIO_FN(PORT29_TPU1TO1), + GPIO_FN(SIM_CLK), \ + GPIO_FN(PORT30_VIO_CKOR), + GPIO_FN(SIM_D), \ + GPIO_FN(PORT31_IROUT), + GPIO_FN(SCIFA4_TXD), + GPIO_FN(SCIFA4_RXD), \ + GPIO_FN(XWUP), + GPIO_FN(SCIFA4_RTS_), + GPIO_FN(SCIFA4_CTS_), + GPIO_FN(FSIBOBT), \ + GPIO_FN(FSIBIBT), + GPIO_FN(FSIBOLR), \ + GPIO_FN(FSIBILR), + GPIO_FN(FSIBOSLD), + GPIO_FN(FSIBISLD), + GPIO_FN(VACK), + GPIO_FN(XTAL1L), + GPIO_FN(SCIFA0_RTS_), \ + GPIO_FN(FSICOSLDT2), + GPIO_FN(SCIFA0_RXD), + GPIO_FN(SCIFA0_CTS_), \ + GPIO_FN(FSICOSLDT1), + GPIO_FN(FSICOBT), \ + GPIO_FN(FSICIBT), \ + GPIO_FN(FSIDOBT), \ + GPIO_FN(FSIDIBT), + GPIO_FN(FSICOLR), \ + GPIO_FN(FSICILR), \ + GPIO_FN(FSIDOLR), \ + GPIO_FN(FSIDILR), + GPIO_FN(FSICOSLD), \ + GPIO_FN(PORT47_FSICSPDIF), + GPIO_FN(FSICISLD), \ + GPIO_FN(FSIDISLD), + GPIO_FN(FSIACK), \ + GPIO_FN(PORT49_IRDA_OUT), \ + GPIO_FN(PORT49_IROUT), \ + GPIO_FN(FSIAOMC), + GPIO_FN(FSIAOLR), \ + GPIO_FN(BBIF2_TSYNC2), \ + GPIO_FN(TPU2TO2), \ + GPIO_FN(FSIAILR), + + GPIO_FN(FSIAOBT), \ + GPIO_FN(BBIF2_TSCK2), \ + GPIO_FN(TPU2TO3), \ + GPIO_FN(FSIAIBT), + GPIO_FN(FSIAOSLD), \ + GPIO_FN(BBIF2_TXD2), + GPIO_FN(FSIASPDIF), \ + GPIO_FN(PORT53_IRDA_IN), \ + GPIO_FN(TPU3TO3), \ + GPIO_FN(FSIBSPDIF), \ + GPIO_FN(PORT53_FSICSPDIF), + GPIO_FN(FSIBCK), \ + GPIO_FN(PORT54_IRDA_FIRSEL), \ + GPIO_FN(TPU3TO2), \ + GPIO_FN(FSIBOMC), \ + GPIO_FN(FSICCK), \ + GPIO_FN(FSICOMC), + GPIO_FN(FSIAISLD), \ + GPIO_FN(TPU0TO0), + GPIO_FN(A0), \ + GPIO_FN(BS_), + GPIO_FN(A12), \ + GPIO_FN(PORT58_KEYOUT7), \ + GPIO_FN(TPU4TO2), + GPIO_FN(A13), \ + GPIO_FN(PORT59_KEYOUT6), \ + GPIO_FN(TPU0TO1), + GPIO_FN(A14), \ + GPIO_FN(KEYOUT5), + GPIO_FN(A15), \ + GPIO_FN(KEYOUT4), + GPIO_FN(A16), \ + GPIO_FN(KEYOUT3), \ + GPIO_FN(MSIOF0_SS1), + GPIO_FN(A17), \ + GPIO_FN(KEYOUT2), \ + GPIO_FN(MSIOF0_TSYNC), + GPIO_FN(A18), \ + GPIO_FN(KEYOUT1), \ + GPIO_FN(MSIOF0_TSCK), + GPIO_FN(A19), \ + GPIO_FN(KEYOUT0), \ + GPIO_FN(MSIOF0_TXD), + GPIO_FN(A20), \ + GPIO_FN(KEYIN0), \ + GPIO_FN(MSIOF0_RSCK), + GPIO_FN(A21), \ + GPIO_FN(KEYIN1), \ + GPIO_FN(MSIOF0_RSYNC), + GPIO_FN(A22), \ + GPIO_FN(KEYIN2), \ + GPIO_FN(MSIOF0_MCK0), + GPIO_FN(A23), \ + GPIO_FN(KEYIN3), \ + GPIO_FN(MSIOF0_MCK1), + GPIO_FN(A24), \ + GPIO_FN(KEYIN4), \ + GPIO_FN(MSIOF0_RXD), + GPIO_FN(A25), \ + GPIO_FN(KEYIN5), \ + GPIO_FN(MSIOF0_SS2), + GPIO_FN(A26), \ + GPIO_FN(KEYIN6), + GPIO_FN(KEYIN7), + GPIO_FN(D0_NAF0), + GPIO_FN(D1_NAF1), + GPIO_FN(D2_NAF2), + GPIO_FN(D3_NAF3), + GPIO_FN(D4_NAF4), + GPIO_FN(D5_NAF5), + GPIO_FN(D6_NAF6), + GPIO_FN(D7_NAF7), + GPIO_FN(D8_NAF8), + GPIO_FN(D9_NAF9), + GPIO_FN(D10_NAF10), + GPIO_FN(D11_NAF11), + GPIO_FN(D12_NAF12), + GPIO_FN(D13_NAF13), + GPIO_FN(D14_NAF14), + GPIO_FN(D15_NAF15), + GPIO_FN(CS4_), + GPIO_FN(CS5A_), \ + GPIO_FN(PORT91_RDWR), + GPIO_FN(CS5B_), \ + GPIO_FN(FCE1_), + GPIO_FN(CS6B_), \ + GPIO_FN(DACK0), + GPIO_FN(FCE0_), \ + GPIO_FN(CS6A_), + GPIO_FN(WAIT_), \ + GPIO_FN(DREQ0), + GPIO_FN(RD__FSC), + GPIO_FN(WE0__FWE), \ + GPIO_FN(RDWR_FWE), + GPIO_FN(WE1_), + GPIO_FN(FRB), + GPIO_FN(CKO), + GPIO_FN(NBRSTOUT_), + GPIO_FN(NBRST_), + GPIO_FN(BBIF2_TXD), + GPIO_FN(BBIF2_RXD), + GPIO_FN(BBIF2_SYNC), + GPIO_FN(BBIF2_SCK), + GPIO_FN(SCIFA3_CTS_), \ + GPIO_FN(MFG3_IN2), + GPIO_FN(SCIFA3_RXD), \ + GPIO_FN(MFG3_IN1), + GPIO_FN(BBIF1_SS2), \ + GPIO_FN(SCIFA3_RTS_), \ + GPIO_FN(MFG3_OUT1), + GPIO_FN(SCIFA3_TXD), + GPIO_FN(HSI_RX_DATA), \ + GPIO_FN(BBIF1_RXD), + GPIO_FN(HSI_TX_WAKE), \ + GPIO_FN(BBIF1_TSCK), + GPIO_FN(HSI_TX_DATA), \ + GPIO_FN(BBIF1_TSYNC), + GPIO_FN(HSI_TX_READY), \ + GPIO_FN(BBIF1_TXD), + GPIO_FN(HSI_RX_READY), \ + GPIO_FN(BBIF1_RSCK), \ + GPIO_FN(PORT115_I2C_SCL2), \ + GPIO_FN(PORT115_I2C_SCL3), + GPIO_FN(HSI_RX_WAKE), \ + GPIO_FN(BBIF1_RSYNC), \ + GPIO_FN(PORT116_I2C_SDA2), \ + GPIO_FN(PORT116_I2C_SDA3), + GPIO_FN(HSI_RX_FLAG), \ + GPIO_FN(BBIF1_SS1), \ + GPIO_FN(BBIF1_FLOW), + GPIO_FN(HSI_TX_FLAG), + GPIO_FN(VIO_VD), \ + GPIO_FN(PORT128_LCD2VSYN), \ + GPIO_FN(VIO2_VD), \ + GPIO_FN(LCD2D0), + + GPIO_FN(VIO_HD), \ + GPIO_FN(PORT129_LCD2HSYN), \ + GPIO_FN(PORT129_LCD2CS_), \ + GPIO_FN(VIO2_HD), \ + GPIO_FN(LCD2D1), + GPIO_FN(VIO_D0), \ + GPIO_FN(PORT130_MSIOF2_RXD), \ + GPIO_FN(LCD2D10), + GPIO_FN(VIO_D1), \ + GPIO_FN(PORT131_KEYOUT6), \ + GPIO_FN(PORT131_MSIOF2_SS1), \ + GPIO_FN(PORT131_KEYOUT11), \ + GPIO_FN(LCD2D11), + GPIO_FN(VIO_D2), \ + GPIO_FN(PORT132_KEYOUT7), \ + GPIO_FN(PORT132_MSIOF2_SS2), \ + GPIO_FN(PORT132_KEYOUT10), \ + GPIO_FN(LCD2D12), + GPIO_FN(VIO_D3), \ + GPIO_FN(MSIOF2_TSYNC), \ + GPIO_FN(LCD2D13), + GPIO_FN(VIO_D4), \ + GPIO_FN(MSIOF2_TXD), \ + GPIO_FN(LCD2D14), + GPIO_FN(VIO_D5), \ + GPIO_FN(MSIOF2_TSCK), \ + GPIO_FN(LCD2D15), + GPIO_FN(VIO_D6), \ + GPIO_FN(PORT136_KEYOUT8), \ + GPIO_FN(LCD2D16), + GPIO_FN(VIO_D7), \ + GPIO_FN(PORT137_KEYOUT9), \ + GPIO_FN(LCD2D17), + GPIO_FN(VIO_D8), \ + GPIO_FN(PORT138_KEYOUT8), \ + GPIO_FN(VIO2_D0), \ + GPIO_FN(LCD2D6), + GPIO_FN(VIO_D9), \ + GPIO_FN(PORT139_KEYOUT9), \ + GPIO_FN(VIO2_D1), \ + GPIO_FN(LCD2D7), + GPIO_FN(VIO_D10), \ + GPIO_FN(TPU0TO2), \ + GPIO_FN(VIO2_D2), \ + GPIO_FN(LCD2D8), + GPIO_FN(VIO_D11), \ + GPIO_FN(TPU0TO3), \ + GPIO_FN(VIO2_D3), \ + GPIO_FN(LCD2D9), + GPIO_FN(VIO_D12), \ + GPIO_FN(PORT142_KEYOUT10), \ + GPIO_FN(VIO2_D4), \ + GPIO_FN(LCD2D2), + GPIO_FN(VIO_D13), \ + GPIO_FN(PORT143_KEYOUT11), \ + GPIO_FN(PORT143_KEYOUT6), \ + GPIO_FN(VIO2_D5), \ + GPIO_FN(LCD2D3), + GPIO_FN(VIO_D14), \ + GPIO_FN(PORT144_KEYOUT7), \ + GPIO_FN(VIO2_D6), \ + GPIO_FN(LCD2D4), + GPIO_FN(VIO_D15), \ + GPIO_FN(TPU1TO3), \ + GPIO_FN(PORT145_LCD2DISP), \ + GPIO_FN(PORT145_LCD2RS), \ + GPIO_FN(VIO2_D7), \ + GPIO_FN(LCD2D5), + GPIO_FN(VIO_CLK), \ + GPIO_FN(LCD2DCK), \ + GPIO_FN(PORT146_LCD2WR_), \ + GPIO_FN(VIO2_CLK), \ + GPIO_FN(LCD2D18), + GPIO_FN(VIO_FIELD), \ + GPIO_FN(LCD2RD_), \ + GPIO_FN(VIO2_FIELD), \ + GPIO_FN(LCD2D19), + GPIO_FN(VIO_CKO), + GPIO_FN(A27), \ + GPIO_FN(PORT149_RDWR), \ + GPIO_FN(MFG0_IN1), \ + GPIO_FN(PORT149_KEYOUT9), + GPIO_FN(MFG0_IN2), + GPIO_FN(TS_SPSYNC3), \ + GPIO_FN(MSIOF2_RSCK), + GPIO_FN(TS_SDAT3), \ + GPIO_FN(MSIOF2_RSYNC), + GPIO_FN(TPU1TO2), \ + GPIO_FN(TS_SDEN3), \ + GPIO_FN(PORT153_MSIOF2_SS1), + GPIO_FN(SCIFA2_TXD1), \ + GPIO_FN(MSIOF2_MCK0), + GPIO_FN(SCIFA2_RXD1), \ + GPIO_FN(MSIOF2_MCK1), + GPIO_FN(SCIFA2_RTS1_), \ + GPIO_FN(PORT156_MSIOF2_SS2), + GPIO_FN(SCIFA2_CTS1_), \ + GPIO_FN(PORT157_MSIOF2_RXD), + GPIO_FN(DINT_), \ + GPIO_FN(SCIFA2_SCK1), \ + GPIO_FN(TS_SCK3), + GPIO_FN(PORT159_SCIFB_SCK), \ + GPIO_FN(PORT159_SCIFA5_SCK), \ + GPIO_FN(NMI), + GPIO_FN(PORT160_SCIFB_TXD), \ + GPIO_FN(PORT160_SCIFA5_TXD), + GPIO_FN(PORT161_SCIFB_CTS_), \ + GPIO_FN(PORT161_SCIFA5_CTS_), + GPIO_FN(PORT162_SCIFB_RXD), \ + GPIO_FN(PORT162_SCIFA5_RXD), + GPIO_FN(PORT163_SCIFB_RTS_), \ + GPIO_FN(PORT163_SCIFA5_RTS_), \ + GPIO_FN(TPU3TO0), + GPIO_FN(LCDD0), + GPIO_FN(LCDD1), \ + GPIO_FN(PORT193_SCIFA5_CTS_), \ + GPIO_FN(BBIF2_TSYNC1), + GPIO_FN(LCDD2), \ + GPIO_FN(PORT194_SCIFA5_RTS_), \ + GPIO_FN(BBIF2_TSCK1), + GPIO_FN(LCDD3), \ + GPIO_FN(PORT195_SCIFA5_RXD), \ + GPIO_FN(BBIF2_TXD1), + GPIO_FN(LCDD4), \ + GPIO_FN(PORT196_SCIFA5_TXD), + GPIO_FN(LCDD5), \ + GPIO_FN(PORT197_SCIFA5_SCK), \ + GPIO_FN(MFG2_OUT2), \ + GPIO_FN(TPU2TO1), + GPIO_FN(LCDD6), + GPIO_FN(LCDD7), \ + GPIO_FN(TPU4TO1), \ + GPIO_FN(MFG4_OUT2), + GPIO_FN(LCDD8), \ + GPIO_FN(D16), + GPIO_FN(LCDD9), \ + GPIO_FN(D17), + GPIO_FN(LCDD10), \ + GPIO_FN(D18), + GPIO_FN(LCDD11), \ + GPIO_FN(D19), + GPIO_FN(LCDD12), \ + GPIO_FN(D20), + GPIO_FN(LCDD13), \ + GPIO_FN(D21), + GPIO_FN(LCDD14), \ + GPIO_FN(D22), + GPIO_FN(LCDD15), \ + GPIO_FN(PORT207_MSIOF0L_SS1), \ + GPIO_FN(D23), + GPIO_FN(LCDD16), \ + GPIO_FN(PORT208_MSIOF0L_SS2), \ + GPIO_FN(D24), + GPIO_FN(LCDD17), \ + GPIO_FN(D25), + GPIO_FN(LCDD18), \ + GPIO_FN(DREQ2), \ + GPIO_FN(PORT210_MSIOF0L_SS1), \ + GPIO_FN(D26), + GPIO_FN(LCDD19), \ + GPIO_FN(PORT211_MSIOF0L_SS2), \ + GPIO_FN(D27), + GPIO_FN(LCDD20), \ + GPIO_FN(TS_SPSYNC1), \ + GPIO_FN(MSIOF0L_MCK0), \ + GPIO_FN(D28), + GPIO_FN(LCDD21), \ + GPIO_FN(TS_SDAT1), \ + GPIO_FN(MSIOF0L_MCK1), \ + GPIO_FN(D29), + GPIO_FN(LCDD22), \ + GPIO_FN(TS_SDEN1), \ + GPIO_FN(MSIOF0L_RSCK), \ + GPIO_FN(D30), + GPIO_FN(LCDD23), \ + GPIO_FN(TS_SCK1), \ + GPIO_FN(MSIOF0L_RSYNC), \ + GPIO_FN(D31), + GPIO_FN(LCDDCK), \ + GPIO_FN(LCDWR_), + GPIO_FN(LCDRD_), \ + GPIO_FN(DACK2), \ + GPIO_FN(PORT217_LCD2RS), \ + GPIO_FN(MSIOF0L_TSYNC), \ + GPIO_FN(VIO2_FIELD3), \ + GPIO_FN(PORT217_LCD2DISP), + GPIO_FN(LCDHSYN), \ + GPIO_FN(LCDCS_), \ + GPIO_FN(LCDCS2_), \ + GPIO_FN(DACK3), \ + GPIO_FN(PORT218_VIO_CKOR), + GPIO_FN(LCDDISP), \ + GPIO_FN(LCDRS), \ + GPIO_FN(PORT219_LCD2WR_), \ + GPIO_FN(DREQ3), \ + GPIO_FN(MSIOF0L_TSCK), \ + GPIO_FN(VIO2_CLK3), \ + GPIO_FN(LCD2DCK_2), + GPIO_FN(LCDVSYN), \ + GPIO_FN(LCDVSYN2), + GPIO_FN(LCDLCLK), \ + GPIO_FN(DREQ1), \ + GPIO_FN(PORT221_LCD2CS_), \ + GPIO_FN(PWEN), \ + GPIO_FN(MSIOF0L_RXD), \ + GPIO_FN(VIO2_HD3), \ + GPIO_FN(PORT221_LCD2HSYN), + GPIO_FN(LCDDON), \ + GPIO_FN(LCDDON2), \ + GPIO_FN(DACK1), \ + GPIO_FN(OVCN), \ + GPIO_FN(MSIOF0L_TXD), \ + GPIO_FN(VIO2_VD3), \ + GPIO_FN(PORT222_LCD2VSYN), + + GPIO_FN(SCIFA1_TXD), \ + GPIO_FN(OVCN2), + GPIO_FN(EXTLP), \ + GPIO_FN(SCIFA1_SCK), \ + GPIO_FN(PORT226_VIO_CKO2), + GPIO_FN(SCIFA1_RTS_), \ + GPIO_FN(IDIN), + GPIO_FN(SCIFA1_RXD), + GPIO_FN(SCIFA1_CTS_), \ + GPIO_FN(MFG1_IN1), + GPIO_FN(MSIOF1_TXD), \ + GPIO_FN(SCIFA2_TXD2), + GPIO_FN(MSIOF1_TSYNC), \ + GPIO_FN(SCIFA2_CTS2_), + GPIO_FN(MSIOF1_TSCK), \ + GPIO_FN(SCIFA2_SCK2), + GPIO_FN(MSIOF1_RXD), \ + GPIO_FN(SCIFA2_RXD2), + GPIO_FN(MSIOF1_RSCK), \ + GPIO_FN(SCIFA2_RTS2_), \ + GPIO_FN(VIO2_CLK2), \ + GPIO_FN(LCD2D20), + GPIO_FN(MSIOF1_RSYNC), \ + GPIO_FN(MFG1_IN2), \ + GPIO_FN(VIO2_VD2), \ + GPIO_FN(LCD2D21), + GPIO_FN(MSIOF1_MCK0), \ + GPIO_FN(PORT236_I2C_SDA2), + GPIO_FN(MSIOF1_MCK1), \ + GPIO_FN(PORT237_I2C_SCL2), + GPIO_FN(MSIOF1_SS1), \ + GPIO_FN(VIO2_FIELD2), \ + GPIO_FN(LCD2D22), + GPIO_FN(MSIOF1_SS2), \ + GPIO_FN(VIO2_HD2), \ + GPIO_FN(LCD2D23), + GPIO_FN(SCIFA6_TXD), + GPIO_FN(PORT241_IRDA_OUT), \ + GPIO_FN(PORT241_IROUT), \ + GPIO_FN(MFG4_OUT1), \ + GPIO_FN(TPU4TO0), + GPIO_FN(PORT242_IRDA_IN), \ + GPIO_FN(MFG4_IN2), + GPIO_FN(PORT243_IRDA_FIRSEL), \ + GPIO_FN(PORT243_VIO_CKO2), + GPIO_FN(PORT244_SCIFA5_CTS_), \ + GPIO_FN(MFG2_IN1), \ + GPIO_FN(PORT244_SCIFB_CTS_), \ + GPIO_FN(MSIOF2R_RXD), + GPIO_FN(PORT245_SCIFA5_RTS_), \ + GPIO_FN(MFG2_IN2), \ + GPIO_FN(PORT245_SCIFB_RTS_), \ + GPIO_FN(MSIOF2R_TXD), + GPIO_FN(PORT246_SCIFA5_RXD), \ + GPIO_FN(MFG1_OUT1), \ + GPIO_FN(PORT246_SCIFB_RXD), \ + GPIO_FN(TPU1TO0), + GPIO_FN(PORT247_SCIFA5_TXD), \ + GPIO_FN(MFG3_OUT2), \ + GPIO_FN(PORT247_SCIFB_TXD), \ + GPIO_FN(TPU3TO1), + GPIO_FN(PORT248_SCIFA5_SCK), \ + GPIO_FN(MFG2_OUT1), \ + GPIO_FN(PORT248_SCIFB_SCK), \ + GPIO_FN(TPU2TO0), \ + GPIO_FN(PORT248_I2C_SCL3), \ + GPIO_FN(MSIOF2R_TSCK), + GPIO_FN(PORT249_IROUT), \ + GPIO_FN(MFG4_IN1), \ + GPIO_FN(PORT249_I2C_SDA3), \ + GPIO_FN(MSIOF2R_TSYNC), + GPIO_FN(SDHICLK0), + GPIO_FN(SDHICD0), + GPIO_FN(SDHID0_0), + GPIO_FN(SDHID0_1), + GPIO_FN(SDHID0_2), + GPIO_FN(SDHID0_3), + GPIO_FN(SDHICMD0), + GPIO_FN(SDHIWP0), + GPIO_FN(SDHICLK1), + GPIO_FN(SDHID1_0), \ + GPIO_FN(TS_SPSYNC2), + GPIO_FN(SDHID1_1), \ + GPIO_FN(TS_SDAT2), + GPIO_FN(SDHID1_2), \ + GPIO_FN(TS_SDEN2), + GPIO_FN(SDHID1_3), \ + GPIO_FN(TS_SCK2), + GPIO_FN(SDHICMD1), + GPIO_FN(SDHICLK2), + GPIO_FN(SDHID2_0), \ + GPIO_FN(TS_SPSYNC4), + GPIO_FN(SDHID2_1), \ + GPIO_FN(TS_SDAT4), + GPIO_FN(SDHID2_2), \ + GPIO_FN(TS_SDEN4), + GPIO_FN(SDHID2_3), \ + GPIO_FN(TS_SCK4), + GPIO_FN(SDHICMD2), + GPIO_FN(MMCCLK0), + GPIO_FN(MMCD0_0), + GPIO_FN(MMCD0_1), + GPIO_FN(MMCD0_2), + GPIO_FN(MMCD0_3), + GPIO_FN(MMCD0_4), \ + GPIO_FN(TS_SPSYNC5), + GPIO_FN(MMCD0_5), \ + GPIO_FN(TS_SDAT5), + GPIO_FN(MMCD0_6), \ + GPIO_FN(TS_SDEN5), + GPIO_FN(MMCD0_7), \ + GPIO_FN(TS_SCK5), + GPIO_FN(MMCCMD0), + GPIO_FN(RESETOUTS_), \ + GPIO_FN(EXTAL2OUT), + GPIO_FN(MCP_WAIT__MCP_FRB), + GPIO_FN(MCP_CKO), \ + GPIO_FN(MMCCLK1), + GPIO_FN(MCP_D15_MCP_NAF15), + GPIO_FN(MCP_D14_MCP_NAF14), + GPIO_FN(MCP_D13_MCP_NAF13), + GPIO_FN(MCP_D12_MCP_NAF12), + GPIO_FN(MCP_D11_MCP_NAF11), + GPIO_FN(MCP_D10_MCP_NAF10), + GPIO_FN(MCP_D9_MCP_NAF9), + GPIO_FN(MCP_D8_MCP_NAF8), \ + GPIO_FN(MMCCMD1), + GPIO_FN(MCP_D7_MCP_NAF7), \ + GPIO_FN(MMCD1_7), + + GPIO_FN(MCP_D6_MCP_NAF6), \ + GPIO_FN(MMCD1_6), + GPIO_FN(MCP_D5_MCP_NAF5), \ + GPIO_FN(MMCD1_5), + GPIO_FN(MCP_D4_MCP_NAF4), \ + GPIO_FN(MMCD1_4), + GPIO_FN(MCP_D3_MCP_NAF3), \ + GPIO_FN(MMCD1_3), + GPIO_FN(MCP_D2_MCP_NAF2), \ + GPIO_FN(MMCD1_2), + GPIO_FN(MCP_D1_MCP_NAF1), \ + GPIO_FN(MMCD1_1), + GPIO_FN(MCP_D0_MCP_NAF0), \ + GPIO_FN(MMCD1_0), + GPIO_FN(MCP_NBRSTOUT_), + GPIO_FN(MCP_WE0__MCP_FWE), \ + GPIO_FN(MCP_RDWR_MCP_FWE), + + /* MSEL2 special cases */ + GPIO_FN(TSIF2_TS_XX1), + GPIO_FN(TSIF2_TS_XX2), + GPIO_FN(TSIF2_TS_XX3), + GPIO_FN(TSIF2_TS_XX4), + GPIO_FN(TSIF2_TS_XX5), + GPIO_FN(TSIF1_TS_XX1), + GPIO_FN(TSIF1_TS_XX2), + GPIO_FN(TSIF1_TS_XX3), + GPIO_FN(TSIF1_TS_XX4), + GPIO_FN(TSIF1_TS_XX5), + GPIO_FN(TSIF0_TS_XX1), + GPIO_FN(TSIF0_TS_XX2), + GPIO_FN(TSIF0_TS_XX3), + GPIO_FN(TSIF0_TS_XX4), + GPIO_FN(TSIF0_TS_XX5), + GPIO_FN(MST1_TS_XX1), + GPIO_FN(MST1_TS_XX2), + GPIO_FN(MST1_TS_XX3), + GPIO_FN(MST1_TS_XX4), + GPIO_FN(MST1_TS_XX5), + GPIO_FN(MST0_TS_XX1), + GPIO_FN(MST0_TS_XX2), + GPIO_FN(MST0_TS_XX3), + GPIO_FN(MST0_TS_XX4), + GPIO_FN(MST0_TS_XX5), + + /* MSEL3 special cases */ + GPIO_FN(SDHI0_VCCQ_MC0_ON), + GPIO_FN(SDHI0_VCCQ_MC0_OFF), + GPIO_FN(DEBUG_MON_VIO), + GPIO_FN(DEBUG_MON_LCDD), + GPIO_FN(LCDC_LCDC0), + GPIO_FN(LCDC_LCDC1), + + /* MSEL4 special cases */ + GPIO_FN(IRQ9_MEM_INT), + GPIO_FN(IRQ9_MCP_INT), + GPIO_FN(A11), + GPIO_FN(KEYOUT8), + GPIO_FN(TPU4TO3), + GPIO_FN(RESETA_N_PU_ON), + GPIO_FN(RESETA_N_PU_OFF), + GPIO_FN(EDBGREQ_PD), + GPIO_FN(EDBGREQ_PU), + + /* Functions with pull-ups */ + GPIO_FN(KEYIN0_PU), + GPIO_FN(KEYIN1_PU), + GPIO_FN(KEYIN2_PU), + GPIO_FN(KEYIN3_PU), + GPIO_FN(KEYIN4_PU), + GPIO_FN(KEYIN5_PU), + GPIO_FN(KEYIN6_PU), + GPIO_FN(KEYIN7_PU), + GPIO_FN(SDHICD0_PU), + GPIO_FN(SDHID0_0_PU), + GPIO_FN(SDHID0_1_PU), + GPIO_FN(SDHID0_2_PU), + GPIO_FN(SDHID0_3_PU), + GPIO_FN(SDHICMD0_PU), + GPIO_FN(SDHIWP0_PU), + GPIO_FN(SDHID1_0_PU), + GPIO_FN(SDHID1_1_PU), + GPIO_FN(SDHID1_2_PU), + GPIO_FN(SDHID1_3_PU), + GPIO_FN(SDHICMD1_PU), + GPIO_FN(SDHID2_0_PU), + GPIO_FN(SDHID2_1_PU), + GPIO_FN(SDHID2_2_PU), + GPIO_FN(SDHID2_3_PU), + GPIO_FN(SDHICMD2_PU), + GPIO_FN(MMCCMD0_PU), + GPIO_FN(MMCCMD1_PU), + GPIO_FN(MMCD0_0_PU), + GPIO_FN(MMCD0_1_PU), + GPIO_FN(MMCD0_2_PU), + GPIO_FN(MMCD0_3_PU), + GPIO_FN(MMCD0_4_PU), + GPIO_FN(MMCD0_5_PU), + GPIO_FN(MMCD0_6_PU), + GPIO_FN(MMCD0_7_PU), + GPIO_FN(FSIACK_PU), + GPIO_FN(FSIAILR_PU), + GPIO_FN(FSIAIBT_PU), + GPIO_FN(FSIAISLD_PU), +}; + +static struct pinmux_cfg_reg pinmux_config_regs[] = { + PORTCR(0, 0xe6050000), /* PORT0CR */ + PORTCR(1, 0xe6050001), /* PORT1CR */ + PORTCR(2, 0xe6050002), /* PORT2CR */ + PORTCR(3, 0xe6050003), /* PORT3CR */ + PORTCR(4, 0xe6050004), /* PORT4CR */ + PORTCR(5, 0xe6050005), /* PORT5CR */ + PORTCR(6, 0xe6050006), /* PORT6CR */ + PORTCR(7, 0xe6050007), /* PORT7CR */ + PORTCR(8, 0xe6050008), /* PORT8CR */ + PORTCR(9, 0xe6050009), /* PORT9CR */ + + PORTCR(10, 0xe605000a), /* PORT10CR */ + PORTCR(11, 0xe605000b), /* PORT11CR */ + PORTCR(12, 0xe605000c), /* PORT12CR */ + PORTCR(13, 0xe605000d), /* PORT13CR */ + PORTCR(14, 0xe605000e), /* PORT14CR */ + PORTCR(15, 0xe605000f), /* PORT15CR */ + PORTCR(16, 0xe6050010), /* PORT16CR */ + PORTCR(17, 0xe6050011), /* PORT17CR */ + PORTCR(18, 0xe6050012), /* PORT18CR */ + PORTCR(19, 0xe6050013), /* PORT19CR */ + + PORTCR(20, 0xe6050014), /* PORT20CR */ + PORTCR(21, 0xe6050015), /* PORT21CR */ + PORTCR(22, 0xe6050016), /* PORT22CR */ + PORTCR(23, 0xe6050017), /* PORT23CR */ + PORTCR(24, 0xe6050018), /* PORT24CR */ + PORTCR(25, 0xe6050019), /* PORT25CR */ + PORTCR(26, 0xe605001a), /* PORT26CR */ + PORTCR(27, 0xe605001b), /* PORT27CR */ + PORTCR(28, 0xe605001c), /* PORT28CR */ + PORTCR(29, 0xe605001d), /* PORT29CR */ + + PORTCR(30, 0xe605001e), /* PORT30CR */ + PORTCR(31, 0xe605001f), /* PORT31CR */ + PORTCR(32, 0xe6051020), /* PORT32CR */ + PORTCR(33, 0xe6051021), /* PORT33CR */ + PORTCR(34, 0xe6051022), /* PORT34CR */ + PORTCR(35, 0xe6051023), /* PORT35CR */ + PORTCR(36, 0xe6051024), /* PORT36CR */ + PORTCR(37, 0xe6051025), /* PORT37CR */ + PORTCR(38, 0xe6051026), /* PORT38CR */ + PORTCR(39, 0xe6051027), /* PORT39CR */ + + PORTCR(40, 0xe6051028), /* PORT40CR */ + PORTCR(41, 0xe6051029), /* PORT41CR */ + PORTCR(42, 0xe605102a), /* PORT42CR */ + PORTCR(43, 0xe605102b), /* PORT43CR */ + PORTCR(44, 0xe605102c), /* PORT44CR */ + PORTCR(45, 0xe605102d), /* PORT45CR */ + PORTCR(46, 0xe605102e), /* PORT46CR */ + PORTCR(47, 0xe605102f), /* PORT47CR */ + PORTCR(48, 0xe6051030), /* PORT48CR */ + PORTCR(49, 0xe6051031), /* PORT49CR */ + + PORTCR(50, 0xe6051032), /* PORT50CR */ + PORTCR(51, 0xe6051033), /* PORT51CR */ + PORTCR(52, 0xe6051034), /* PORT52CR */ + PORTCR(53, 0xe6051035), /* PORT53CR */ + PORTCR(54, 0xe6051036), /* PORT54CR */ + PORTCR(55, 0xe6051037), /* PORT55CR */ + PORTCR(56, 0xe6051038), /* PORT56CR */ + PORTCR(57, 0xe6051039), /* PORT57CR */ + PORTCR(58, 0xe605103a), /* PORT58CR */ + PORTCR(59, 0xe605103b), /* PORT59CR */ + + PORTCR(60, 0xe605103c), /* PORT60CR */ + PORTCR(61, 0xe605103d), /* PORT61CR */ + PORTCR(62, 0xe605103e), /* PORT62CR */ + PORTCR(63, 0xe605103f), /* PORT63CR */ + PORTCR(64, 0xe6051040), /* PORT64CR */ + PORTCR(65, 0xe6051041), /* PORT65CR */ + PORTCR(66, 0xe6051042), /* PORT66CR */ + PORTCR(67, 0xe6051043), /* PORT67CR */ + PORTCR(68, 0xe6051044), /* PORT68CR */ + PORTCR(69, 0xe6051045), /* PORT69CR */ + + PORTCR(70, 0xe6051046), /* PORT70CR */ + PORTCR(71, 0xe6051047), /* PORT71CR */ + PORTCR(72, 0xe6051048), /* PORT72CR */ + PORTCR(73, 0xe6051049), /* PORT73CR */ + PORTCR(74, 0xe605104a), /* PORT74CR */ + PORTCR(75, 0xe605104b), /* PORT75CR */ + PORTCR(76, 0xe605104c), /* PORT76CR */ + PORTCR(77, 0xe605104d), /* PORT77CR */ + PORTCR(78, 0xe605104e), /* PORT78CR */ + PORTCR(79, 0xe605104f), /* PORT79CR */ + + PORTCR(80, 0xe6051050), /* PORT80CR */ + PORTCR(81, 0xe6051051), /* PORT81CR */ + PORTCR(82, 0xe6051052), /* PORT82CR */ + PORTCR(83, 0xe6051053), /* PORT83CR */ + PORTCR(84, 0xe6051054), /* PORT84CR */ + PORTCR(85, 0xe6051055), /* PORT85CR */ + PORTCR(86, 0xe6051056), /* PORT86CR */ + PORTCR(87, 0xe6051057), /* PORT87CR */ + PORTCR(88, 0xe6051058), /* PORT88CR */ + PORTCR(89, 0xe6051059), /* PORT89CR */ + + PORTCR(90, 0xe605105a), /* PORT90CR */ + PORTCR(91, 0xe605105b), /* PORT91CR */ + PORTCR(92, 0xe605105c), /* PORT92CR */ + PORTCR(93, 0xe605105d), /* PORT93CR */ + PORTCR(94, 0xe605105e), /* PORT94CR */ + PORTCR(95, 0xe605105f), /* PORT95CR */ + PORTCR(96, 0xe6052060), /* PORT96CR */ + PORTCR(97, 0xe6052061), /* PORT97CR */ + PORTCR(98, 0xe6052062), /* PORT98CR */ + PORTCR(99, 0xe6052063), /* PORT99CR */ + + PORTCR(100, 0xe6052064), /* PORT100CR */ + PORTCR(101, 0xe6052065), /* PORT101CR */ + PORTCR(102, 0xe6052066), /* PORT102CR */ + PORTCR(103, 0xe6052067), /* PORT103CR */ + PORTCR(104, 0xe6052068), /* PORT104CR */ + PORTCR(105, 0xe6052069), /* PORT105CR */ + PORTCR(106, 0xe605206a), /* PORT106CR */ + PORTCR(107, 0xe605206b), /* PORT107CR */ + PORTCR(108, 0xe605206c), /* PORT108CR */ + PORTCR(109, 0xe605206d), /* PORT109CR */ + + PORTCR(110, 0xe605206e), /* PORT110CR */ + PORTCR(111, 0xe605206f), /* PORT111CR */ + PORTCR(112, 0xe6052070), /* PORT112CR */ + PORTCR(113, 0xe6052071), /* PORT113CR */ + PORTCR(114, 0xe6052072), /* PORT114CR */ + PORTCR(115, 0xe6052073), /* PORT115CR */ + PORTCR(116, 0xe6052074), /* PORT116CR */ + PORTCR(117, 0xe6052075), /* PORT117CR */ + PORTCR(118, 0xe6052076), /* PORT118CR */ + + PORTCR(128, 0xe6052080), /* PORT128CR */ + PORTCR(129, 0xe6052081), /* PORT129CR */ + + PORTCR(130, 0xe6052082), /* PORT130CR */ + PORTCR(131, 0xe6052083), /* PORT131CR */ + PORTCR(132, 0xe6052084), /* PORT132CR */ + PORTCR(133, 0xe6052085), /* PORT133CR */ + PORTCR(134, 0xe6052086), /* PORT134CR */ + PORTCR(135, 0xe6052087), /* PORT135CR */ + PORTCR(136, 0xe6052088), /* PORT136CR */ + PORTCR(137, 0xe6052089), /* PORT137CR */ + PORTCR(138, 0xe605208a), /* PORT138CR */ + PORTCR(139, 0xe605208b), /* PORT139CR */ + + PORTCR(140, 0xe605208c), /* PORT140CR */ + PORTCR(141, 0xe605208d), /* PORT141CR */ + PORTCR(142, 0xe605208e), /* PORT142CR */ + PORTCR(143, 0xe605208f), /* PORT143CR */ + PORTCR(144, 0xe6052090), /* PORT144CR */ + PORTCR(145, 0xe6052091), /* PORT145CR */ + PORTCR(146, 0xe6052092), /* PORT146CR */ + PORTCR(147, 0xe6052093), /* PORT147CR */ + PORTCR(148, 0xe6052094), /* PORT148CR */ + PORTCR(149, 0xe6052095), /* PORT149CR */ + + PORTCR(150, 0xe6052096), /* PORT150CR */ + PORTCR(151, 0xe6052097), /* PORT151CR */ + PORTCR(152, 0xe6052098), /* PORT152CR */ + PORTCR(153, 0xe6052099), /* PORT153CR */ + PORTCR(154, 0xe605209a), /* PORT154CR */ + PORTCR(155, 0xe605209b), /* PORT155CR */ + PORTCR(156, 0xe605209c), /* PORT156CR */ + PORTCR(157, 0xe605209d), /* PORT157CR */ + PORTCR(158, 0xe605209e), /* PORT158CR */ + PORTCR(159, 0xe605209f), /* PORT159CR */ + + PORTCR(160, 0xe60520a0), /* PORT160CR */ + PORTCR(161, 0xe60520a1), /* PORT161CR */ + PORTCR(162, 0xe60520a2), /* PORT162CR */ + PORTCR(163, 0xe60520a3), /* PORT163CR */ + PORTCR(164, 0xe60520a4), /* PORT164CR */ + + PORTCR(192, 0xe60520c0), /* PORT192CR */ + PORTCR(193, 0xe60520c1), /* PORT193CR */ + PORTCR(194, 0xe60520c2), /* PORT194CR */ + PORTCR(195, 0xe60520c3), /* PORT195CR */ + PORTCR(196, 0xe60520c4), /* PORT196CR */ + PORTCR(197, 0xe60520c5), /* PORT197CR */ + PORTCR(198, 0xe60520c6), /* PORT198CR */ + PORTCR(199, 0xe60520c7), /* PORT199CR */ + + PORTCR(200, 0xe60520c8), /* PORT200CR */ + PORTCR(201, 0xe60520c9), /* PORT201CR */ + PORTCR(202, 0xe60520ca), /* PORT202CR */ + PORTCR(203, 0xe60520cb), /* PORT203CR */ + PORTCR(204, 0xe60520cc), /* PORT204CR */ + PORTCR(205, 0xe60520cd), /* PORT205CR */ + PORTCR(206, 0xe60520ce), /* PORT206CR */ + PORTCR(207, 0xe60520cf), /* PORT207CR */ + PORTCR(208, 0xe60520d0), /* PORT208CR */ + PORTCR(209, 0xe60520d1), /* PORT209CR */ + + PORTCR(210, 0xe60520d2), /* PORT210CR */ + PORTCR(211, 0xe60520d3), /* PORT211CR */ + PORTCR(212, 0xe60520d4), /* PORT212CR */ + PORTCR(213, 0xe60520d5), /* PORT213CR */ + PORTCR(214, 0xe60520d6), /* PORT214CR */ + PORTCR(215, 0xe60520d7), /* PORT215CR */ + PORTCR(216, 0xe60520d8), /* PORT216CR */ + PORTCR(217, 0xe60520d9), /* PORT217CR */ + PORTCR(218, 0xe60520da), /* PORT218CR */ + PORTCR(219, 0xe60520db), /* PORT219CR */ + + PORTCR(220, 0xe60520dc), /* PORT220CR */ + PORTCR(221, 0xe60520dd), /* PORT221CR */ + PORTCR(222, 0xe60520de), /* PORT222CR */ + PORTCR(223, 0xe60520df), /* PORT223CR */ + PORTCR(224, 0xe60530e0), /* PORT224CR */ + PORTCR(225, 0xe60530e1), /* PORT225CR */ + PORTCR(226, 0xe60530e2), /* PORT226CR */ + PORTCR(227, 0xe60530e3), /* PORT227CR */ + PORTCR(228, 0xe60530e4), /* PORT228CR */ + PORTCR(229, 0xe60530e5), /* PORT229CR */ + + PORTCR(230, 0xe60530e6), /* PORT230CR */ + PORTCR(231, 0xe60530e7), /* PORT231CR */ + PORTCR(232, 0xe60530e8), /* PORT232CR */ + PORTCR(233, 0xe60530e9), /* PORT233CR */ + PORTCR(234, 0xe60530ea), /* PORT234CR */ + PORTCR(235, 0xe60530eb), /* PORT235CR */ + PORTCR(236, 0xe60530ec), /* PORT236CR */ + PORTCR(237, 0xe60530ed), /* PORT237CR */ + PORTCR(238, 0xe60530ee), /* PORT238CR */ + PORTCR(239, 0xe60530ef), /* PORT239CR */ + + PORTCR(240, 0xe60530f0), /* PORT240CR */ + PORTCR(241, 0xe60530f1), /* PORT241CR */ + PORTCR(242, 0xe60530f2), /* PORT242CR */ + PORTCR(243, 0xe60530f3), /* PORT243CR */ + PORTCR(244, 0xe60530f4), /* PORT244CR */ + PORTCR(245, 0xe60530f5), /* PORT245CR */ + PORTCR(246, 0xe60530f6), /* PORT246CR */ + PORTCR(247, 0xe60530f7), /* PORT247CR */ + PORTCR(248, 0xe60530f8), /* PORT248CR */ + PORTCR(249, 0xe60530f9), /* PORT249CR */ + + PORTCR(250, 0xe60530fa), /* PORT250CR */ + PORTCR(251, 0xe60530fb), /* PORT251CR */ + PORTCR(252, 0xe60530fc), /* PORT252CR */ + PORTCR(253, 0xe60530fd), /* PORT253CR */ + PORTCR(254, 0xe60530fe), /* PORT254CR */ + PORTCR(255, 0xe60530ff), /* PORT255CR */ + PORTCR(256, 0xe6053100), /* PORT256CR */ + PORTCR(257, 0xe6053101), /* PORT257CR */ + PORTCR(258, 0xe6053102), /* PORT258CR */ + PORTCR(259, 0xe6053103), /* PORT259CR */ + + PORTCR(260, 0xe6053104), /* PORT260CR */ + PORTCR(261, 0xe6053105), /* PORT261CR */ + PORTCR(262, 0xe6053106), /* PORT262CR */ + PORTCR(263, 0xe6053107), /* PORT263CR */ + PORTCR(264, 0xe6053108), /* PORT264CR */ + PORTCR(265, 0xe6053109), /* PORT265CR */ + PORTCR(266, 0xe605310a), /* PORT266CR */ + PORTCR(267, 0xe605310b), /* PORT267CR */ + PORTCR(268, 0xe605310c), /* PORT268CR */ + PORTCR(269, 0xe605310d), /* PORT269CR */ + + PORTCR(270, 0xe605310e), /* PORT270CR */ + PORTCR(271, 0xe605310f), /* PORT271CR */ + PORTCR(272, 0xe6053110), /* PORT272CR */ + PORTCR(273, 0xe6053111), /* PORT273CR */ + PORTCR(274, 0xe6053112), /* PORT274CR */ + PORTCR(275, 0xe6053113), /* PORT275CR */ + PORTCR(276, 0xe6053114), /* PORT276CR */ + PORTCR(277, 0xe6053115), /* PORT277CR */ + PORTCR(278, 0xe6053116), /* PORT278CR */ + PORTCR(279, 0xe6053117), /* PORT279CR */ + + PORTCR(280, 0xe6053118), /* PORT280CR */ + PORTCR(281, 0xe6053119), /* PORT281CR */ + PORTCR(282, 0xe605311a), /* PORT282CR */ + + PORTCR(288, 0xe6052120), /* PORT288CR */ + PORTCR(289, 0xe6052121), /* PORT289CR */ + + PORTCR(290, 0xe6052122), /* PORT290CR */ + PORTCR(291, 0xe6052123), /* PORT291CR */ + PORTCR(292, 0xe6052124), /* PORT292CR */ + PORTCR(293, 0xe6052125), /* PORT293CR */ + PORTCR(294, 0xe6052126), /* PORT294CR */ + PORTCR(295, 0xe6052127), /* PORT295CR */ + PORTCR(296, 0xe6052128), /* PORT296CR */ + PORTCR(297, 0xe6052129), /* PORT297CR */ + PORTCR(298, 0xe605212a), /* PORT298CR */ + PORTCR(299, 0xe605212b), /* PORT299CR */ + + PORTCR(300, 0xe605212c), /* PORT300CR */ + PORTCR(301, 0xe605212d), /* PORT301CR */ + PORTCR(302, 0xe605212e), /* PORT302CR */ + PORTCR(303, 0xe605212f), /* PORT303CR */ + PORTCR(304, 0xe6052130), /* PORT304CR */ + PORTCR(305, 0xe6052131), /* PORT305CR */ + PORTCR(306, 0xe6052132), /* PORT306CR */ + PORTCR(307, 0xe6052133), /* PORT307CR */ + PORTCR(308, 0xe6052134), /* PORT308CR */ + PORTCR(309, 0xe6052135), /* PORT309CR */ + + { PINMUX_CFG_REG("MSEL2CR", 0xe605801c, 32, 1) { + 0, 0, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + MSEL2CR_MSEL19_0, MSEL2CR_MSEL19_1, + MSEL2CR_MSEL18_0, MSEL2CR_MSEL18_1, + MSEL2CR_MSEL17_0, MSEL2CR_MSEL17_1, + MSEL2CR_MSEL16_0, MSEL2CR_MSEL16_1, + 0, 0, + MSEL2CR_MSEL14_0, MSEL2CR_MSEL14_1, + MSEL2CR_MSEL13_0, MSEL2CR_MSEL13_1, + MSEL2CR_MSEL12_0, MSEL2CR_MSEL12_1, + MSEL2CR_MSEL11_0, MSEL2CR_MSEL11_1, + MSEL2CR_MSEL10_0, MSEL2CR_MSEL10_1, + MSEL2CR_MSEL9_0, MSEL2CR_MSEL9_1, + MSEL2CR_MSEL8_0, MSEL2CR_MSEL8_1, + MSEL2CR_MSEL7_0, MSEL2CR_MSEL7_1, + MSEL2CR_MSEL6_0, MSEL2CR_MSEL6_1, + MSEL2CR_MSEL5_0, MSEL2CR_MSEL5_1, + MSEL2CR_MSEL4_0, MSEL2CR_MSEL4_1, + MSEL2CR_MSEL3_0, MSEL2CR_MSEL3_1, + MSEL2CR_MSEL2_0, MSEL2CR_MSEL2_1, + MSEL2CR_MSEL1_0, MSEL2CR_MSEL1_1, + MSEL2CR_MSEL0_0, MSEL2CR_MSEL0_1, + } + }, + { PINMUX_CFG_REG("MSEL3CR", 0xe6058020, 32, 1) { + 0, 0, + 0, 0, + 0, 0, + MSEL3CR_MSEL28_0, MSEL3CR_MSEL28_1, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + MSEL3CR_MSEL15_0, MSEL3CR_MSEL15_1, + 0, 0, + 0, 0, + 0, 0, + MSEL3CR_MSEL11_0, MSEL3CR_MSEL11_1, + 0, 0, + MSEL3CR_MSEL9_0, MSEL3CR_MSEL9_1, + 0, 0, + 0, 0, + MSEL3CR_MSEL6_0, MSEL3CR_MSEL6_1, + 0, 0, + 0, 0, + 0, 0, + MSEL3CR_MSEL2_0, MSEL3CR_MSEL2_1, + 0, 0, + 0, 0, + } + }, + { PINMUX_CFG_REG("MSEL4CR", 0xe6058024, 32, 1) { + 0, 0, + 0, 0, + MSEL4CR_MSEL29_0, MSEL4CR_MSEL29_1, + 0, 0, + MSEL4CR_MSEL27_0, MSEL4CR_MSEL27_1, + MSEL4CR_MSEL26_0, MSEL4CR_MSEL26_1, + 0, 0, + 0, 0, + 0, 0, + MSEL4CR_MSEL22_0, MSEL4CR_MSEL22_1, + MSEL4CR_MSEL21_0, MSEL4CR_MSEL21_1, + MSEL4CR_MSEL20_0, MSEL4CR_MSEL20_1, + MSEL4CR_MSEL19_0, MSEL4CR_MSEL19_1, + 0, 0, + 0, 0, + 0, 0, + MSEL4CR_MSEL15_0, MSEL4CR_MSEL15_1, + 0, 0, + MSEL4CR_MSEL13_0, MSEL4CR_MSEL13_1, + MSEL4CR_MSEL12_0, MSEL4CR_MSEL12_1, + MSEL4CR_MSEL11_0, MSEL4CR_MSEL11_1, + MSEL4CR_MSEL10_0, MSEL4CR_MSEL10_1, + MSEL4CR_MSEL9_0, MSEL4CR_MSEL9_1, + MSEL4CR_MSEL8_0, MSEL4CR_MSEL8_1, + MSEL4CR_MSEL7_0, MSEL4CR_MSEL7_1, + 0, 0, + 0, 0, + MSEL4CR_MSEL4_0, MSEL4CR_MSEL4_1, + 0, 0, + 0, 0, + MSEL4CR_MSEL1_0, MSEL4CR_MSEL1_1, + 0, 0, + } + }, + { }, +}; + +static struct pinmux_data_reg pinmux_data_regs[] = { + { PINMUX_DATA_REG("PORTL031_000DR", 0xe6054000, 32) { + PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA, + PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA, + PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA, + PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA, + PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA, + PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA, + PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA, + PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA } + }, + { PINMUX_DATA_REG("PORTD063_032DR", 0xe6055000, 32) { + PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA, + PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA, + PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA, + PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA, + PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA, + PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA, + PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA, + PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA } + }, + { PINMUX_DATA_REG("PORTD095_064DR", 0xe6055004, 32) { + PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA, + PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA, + PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA, + PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA, + PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA, + PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA, + PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA, + PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA } + }, + { PINMUX_DATA_REG("PORTR127_096DR", 0xe6056000, 32) { + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, PORT118_DATA, PORT117_DATA, PORT116_DATA, + PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA, + PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA, + PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA, + PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA, + PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA } + }, + { PINMUX_DATA_REG("PORTR159_128DR", 0xe6056004, 32) { + PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA, + PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA, + PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA, + PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA, + PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA, + PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA, + PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA, + PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA } + }, + { PINMUX_DATA_REG("PORTR191_160DR", 0xe6056008, 32) { + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, PORT164_DATA, + PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA } + }, + { PINMUX_DATA_REG("PORTR223_192DR", 0xe605600C, 32) { + PORT223_DATA, PORT222_DATA, PORT221_DATA, PORT220_DATA, + PORT219_DATA, PORT218_DATA, PORT217_DATA, PORT216_DATA, + PORT215_DATA, PORT214_DATA, PORT213_DATA, PORT212_DATA, + PORT211_DATA, PORT210_DATA, PORT209_DATA, PORT208_DATA, + PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA, + PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA, + PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA, + PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA } + }, + { PINMUX_DATA_REG("PORTU255_224DR", 0xe6057000, 32) { + PORT255_DATA, PORT254_DATA, PORT253_DATA, PORT252_DATA, + PORT251_DATA, PORT250_DATA, PORT249_DATA, PORT248_DATA, + PORT247_DATA, PORT246_DATA, PORT245_DATA, PORT244_DATA, + PORT243_DATA, PORT242_DATA, PORT241_DATA, PORT240_DATA, + PORT239_DATA, PORT238_DATA, PORT237_DATA, PORT236_DATA, + PORT235_DATA, PORT234_DATA, PORT233_DATA, PORT232_DATA, + PORT231_DATA, PORT230_DATA, PORT229_DATA, PORT228_DATA, + PORT227_DATA, PORT226_DATA, PORT225_DATA, PORT224_DATA } + }, + { PINMUX_DATA_REG("PORTU287_256DR", 0xe6057004, 32) { + 0, 0, 0, 0, + 0, PORT282_DATA, PORT281_DATA, PORT280_DATA, + PORT279_DATA, PORT278_DATA, PORT277_DATA, PORT276_DATA, + PORT275_DATA, PORT274_DATA, PORT273_DATA, PORT272_DATA, + PORT271_DATA, PORT270_DATA, PORT269_DATA, PORT268_DATA, + PORT267_DATA, PORT266_DATA, PORT265_DATA, PORT264_DATA, + PORT263_DATA, PORT262_DATA, PORT261_DATA, PORT260_DATA, + PORT259_DATA, PORT258_DATA, PORT257_DATA, PORT256_DATA } + }, + { PINMUX_DATA_REG("PORTR319_288DR", 0xe6056010, 32) { + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, PORT309_DATA, PORT308_DATA, + PORT307_DATA, PORT306_DATA, PORT305_DATA, PORT304_DATA, + PORT303_DATA, PORT302_DATA, PORT301_DATA, PORT300_DATA, + PORT299_DATA, PORT298_DATA, PORT297_DATA, PORT296_DATA, + PORT295_DATA, PORT294_DATA, PORT293_DATA, PORT292_DATA, + PORT291_DATA, PORT290_DATA, PORT289_DATA, PORT288_DATA } + }, + { }, +}; + +#if 0 +/* IRQ pins through INTCS with IRQ0->15 from 0x200 and IRQ16-31 from 0x3200 */ +#define EXT_IRQ16L(n) intcs_evt2irq(0x200 + ((n) << 5)) +#define EXT_IRQ16H(n) intcs_evt2irq(0x3200 + ((n - 16) << 5)) +#else +#define EXT_IRQ16L(n) (n) +#define EXT_IRQ16H(n) (n) +#endif + +static struct pinmux_irq pinmux_irqs[] = { + PINMUX_IRQ(EXT_IRQ16H(19), PORT9_FN0), + PINMUX_IRQ(EXT_IRQ16L(1), PORT10_FN0), + PINMUX_IRQ(EXT_IRQ16L(0), PORT11_FN0), + PINMUX_IRQ(EXT_IRQ16H(18), PORT13_FN0), + PINMUX_IRQ(EXT_IRQ16H(20), PORT14_FN0), + PINMUX_IRQ(EXT_IRQ16H(21), PORT15_FN0), + PINMUX_IRQ(EXT_IRQ16H(31), PORT26_FN0), + PINMUX_IRQ(EXT_IRQ16H(30), PORT27_FN0), + PINMUX_IRQ(EXT_IRQ16H(29), PORT28_FN0), + PINMUX_IRQ(EXT_IRQ16H(22), PORT40_FN0), + PINMUX_IRQ(EXT_IRQ16H(23), PORT53_FN0), + PINMUX_IRQ(EXT_IRQ16L(10), PORT54_FN0), + PINMUX_IRQ(EXT_IRQ16L(9), PORT56_FN0), + PINMUX_IRQ(EXT_IRQ16H(26), PORT115_FN0), + PINMUX_IRQ(EXT_IRQ16H(27), PORT116_FN0), + PINMUX_IRQ(EXT_IRQ16H(28), PORT117_FN0), + PINMUX_IRQ(EXT_IRQ16H(24), PORT118_FN0), + PINMUX_IRQ(EXT_IRQ16L(6), PORT147_FN0), + PINMUX_IRQ(EXT_IRQ16L(2), PORT149_FN0), + PINMUX_IRQ(EXT_IRQ16L(7), PORT150_FN0), + PINMUX_IRQ(EXT_IRQ16L(12), PORT156_FN0), + PINMUX_IRQ(EXT_IRQ16L(4), PORT159_FN0), + PINMUX_IRQ(EXT_IRQ16H(25), PORT164_FN0), + PINMUX_IRQ(EXT_IRQ16L(8), PORT223_FN0), + PINMUX_IRQ(EXT_IRQ16L(3), PORT224_FN0), + PINMUX_IRQ(EXT_IRQ16L(5), PORT227_FN0), + PINMUX_IRQ(EXT_IRQ16H(17), PORT234_FN0), + PINMUX_IRQ(EXT_IRQ16L(11), PORT238_FN0), + PINMUX_IRQ(EXT_IRQ16L(13), PORT239_FN0), + PINMUX_IRQ(EXT_IRQ16H(16), PORT249_FN0), + PINMUX_IRQ(EXT_IRQ16L(14), PORT251_FN0), + PINMUX_IRQ(EXT_IRQ16L(9), PORT308_FN0), +}; + +static struct pinmux_info sh73a0_pinmux_info = { + .name = "sh73a0_pfc", + .reserved_id = PINMUX_RESERVED, + .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END }, + .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END }, + .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END }, + .input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END }, + .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END }, + .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END }, + .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END }, + + .first_gpio = GPIO_PORT0, + .last_gpio = GPIO_FN_FSIAISLD_PU, + + .gpios = pinmux_gpios, + .cfg_regs = pinmux_config_regs, + .data_regs = pinmux_data_regs, + + .gpio_data = pinmux_data, + .gpio_data_size = ARRAY_SIZE(pinmux_data), + + .gpio_irq = pinmux_irqs, + .gpio_irq_size = ARRAY_SIZE(pinmux_irqs), +}; + +void sh73a0_pinmux_init(void) +{ + register_pinmux(&sh73a0_pinmux_info); +} diff --git a/arch/arm/cpu/armv7/rmobile/timer.c b/arch/arm/cpu/armv7/rmobile/timer.c new file mode 100644 index 0000000..37522dc --- /dev/null +++ b/arch/arm/cpu/armv7/rmobile/timer.c @@ -0,0 +1,97 @@ +/* + * (C) Copyright 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> + * (C) Copyright 2012 Renesas Solutions Corp. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch-armv7/globaltimer.h> +#include <asm/arch/rmobile.h> + +static struct globaltimer *global_timer = \ + (struct globaltimer *)GLOBAL_TIMER_BASE_ADDR; + +#define CLK2MHZ(clk) (clk / 1000 / 1000) +static u64 get_cpu_global_timer(void) +{ + u32 low, high; + u64 timer; + + u32 old = readl(&global_timer->cnt_h); + while (1) { + low = readl(&global_timer->cnt_l); + high = readl(&global_timer->cnt_h); + if (old == high) + break; + else + old = high; + } + + timer = high; + return (u64)((timer << 32) | low); +} + +static u64 get_time_us(void) +{ + u64 timer = get_cpu_global_timer(); + + timer = ((timer << 2) + (CLK2MHZ(CONFIG_SYS_CPU_CLK) >> 1)); + timer /= (u64)CLK2MHZ(CONFIG_SYS_CPU_CLK); + return timer; +} + +static ulong get_time_ms(void) +{ + return (ulong)(get_time_us() / 1000); +} + +int timer_init(void) +{ + writel(0x01, &global_timer->ctl); + return 0; +} + +void __udelay(unsigned long usec) +{ + u64 start, current; + u64 wait; + + start = get_cpu_global_timer(); + wait = (u64)((usec * CLK2MHZ(CONFIG_SYS_CPU_CLK)) >> 2); + do { + current = get_cpu_global_timer(); + } while ((current - start) < wait); +} + +ulong get_timer(ulong base) +{ + return get_time_ms() - base; +} + +unsigned long long get_ticks(void) +{ + return get_cpu_global_timer(); +} + +ulong get_tbclk(void) +{ + return (ulong)(CONFIG_SYS_CPU_CLK >> 2); +} diff --git a/arch/arm/cpu/armv7/s5p-common/Makefile b/arch/arm/cpu/armv7/s5p-common/Makefile new file mode 100644 index 0000000..0c38bd0 --- /dev/null +++ b/arch/arm/cpu/armv7/s5p-common/Makefile @@ -0,0 +1,50 @@ +# +# Copyright (C) 2009 Samsung Electronics +# Minkyu Kang <mk7.kang@samsung.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)libs5p-common.o + +COBJS-y += cpu_info.o +ifndef CONFIG_SPL_BUILD +COBJS-y += timer.o +COBJS-y += sromc.o +COBJS-$(CONFIG_PWM) += pwm.o +endif + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y) $(SOBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/s5p-common/cpu_info.c b/arch/arm/cpu/armv7/s5p-common/cpu_info.c new file mode 100644 index 0000000..1642733 --- /dev/null +++ b/arch/arm/cpu/armv7/s5p-common/cpu_info.c @@ -0,0 +1,57 @@ +/* + * Copyright (C) 2009 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clk.h> + +/* Default is s5pc100 */ +unsigned int s5p_cpu_id = 0xC100; +/* Default is EVT1 */ +unsigned int s5p_cpu_rev = 1; + +#ifdef CONFIG_ARCH_CPU_INIT +int arch_cpu_init(void) +{ + s5p_set_cpu_id(); + + return 0; +} +#endif + +u32 get_device_type(void) +{ + return s5p_cpu_id; +} + +#ifdef CONFIG_DISPLAY_CPUINFO +int print_cpuinfo(void) +{ + char buf[32]; + + printf("CPU:\t%s%X@%sMHz\n", + s5p_get_cpu_name(), s5p_cpu_id, + strmhz(buf, get_arm_clk())); + + return 0; +} +#endif diff --git a/arch/arm/cpu/armv7/s5p-common/pwm.c b/arch/arm/cpu/armv7/s5p-common/pwm.c new file mode 100644 index 0000000..6f401b8 --- /dev/null +++ b/arch/arm/cpu/armv7/s5p-common/pwm.c @@ -0,0 +1,187 @@ +/* + * Copyright (C) 2011 Samsung Electronics + * + * Donghwa Lee <dh09.lee@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <errno.h> +#include <pwm.h> +#include <asm/io.h> +#include <asm/arch/pwm.h> +#include <asm/arch/clk.h> + +int pwm_enable(int pwm_id) +{ + const struct s5p_timer *pwm = + (struct s5p_timer *)samsung_get_base_timer(); + unsigned long tcon; + + tcon = readl(&pwm->tcon); + tcon |= TCON_START(pwm_id); + + writel(tcon, &pwm->tcon); + + return 0; +} + +void pwm_disable(int pwm_id) +{ + const struct s5p_timer *pwm = + (struct s5p_timer *)samsung_get_base_timer(); + unsigned long tcon; + + tcon = readl(&pwm->tcon); + tcon &= ~TCON_START(pwm_id); + + writel(tcon, &pwm->tcon); +} + +static unsigned long pwm_calc_tin(int pwm_id, unsigned long freq) +{ + unsigned long tin_parent_rate; + unsigned int div; + + tin_parent_rate = get_pwm_clk(); + + for (div = 2; div <= 16; div *= 2) { + if ((tin_parent_rate / (div << 16)) < freq) + return tin_parent_rate / div; + } + + return tin_parent_rate / 16; +} + +#define NS_IN_SEC 1000000000UL + +int pwm_config(int pwm_id, int duty_ns, int period_ns) +{ + const struct s5p_timer *pwm = + (struct s5p_timer *)samsung_get_base_timer(); + unsigned int offset; + unsigned long tin_rate; + unsigned long tin_ns; + unsigned long frequency; + unsigned long tcon; + unsigned long tcnt; + unsigned long tcmp; + + /* + * We currently avoid using 64bit arithmetic by using the + * fact that anything faster than 1GHz is easily representable + * by 32bits. + */ + if (period_ns > NS_IN_SEC || duty_ns > NS_IN_SEC || period_ns == 0) + return -ERANGE; + + if (duty_ns > period_ns) + return -EINVAL; + + frequency = NS_IN_SEC / period_ns; + + /* Check to see if we are changing the clock rate of the PWM */ + tin_rate = pwm_calc_tin(pwm_id, frequency); + + tin_ns = NS_IN_SEC / tin_rate; + tcnt = period_ns / tin_ns; + + /* Note, counters count down */ + tcmp = duty_ns / tin_ns; + tcmp = tcnt - tcmp; + + /* Update the PWM register block. */ + offset = pwm_id * 3; + if (pwm_id < 4) { + writel(tcnt, &pwm->tcntb0 + offset); + writel(tcmp, &pwm->tcmpb0 + offset); + } + + tcon = readl(&pwm->tcon); + tcon |= TCON_UPDATE(pwm_id); + if (pwm_id < 4) + tcon |= TCON_AUTO_RELOAD(pwm_id); + else + tcon |= TCON4_AUTO_RELOAD; + writel(tcon, &pwm->tcon); + + tcon &= ~TCON_UPDATE(pwm_id); + writel(tcon, &pwm->tcon); + + return 0; +} + +int pwm_init(int pwm_id, int div, int invert) +{ + u32 val; + const struct s5p_timer *pwm = + (struct s5p_timer *)samsung_get_base_timer(); + unsigned long ticks_per_period; + unsigned int offset, prescaler; + + /* + * Timer Freq(HZ) = + * PWM_CLK / { (prescaler_value + 1) * (divider_value) } + */ + + val = readl(&pwm->tcfg0); + if (pwm_id < 2) { + prescaler = PRESCALER_0; + val &= ~0xff; + val |= (prescaler & 0xff); + } else { + prescaler = PRESCALER_1; + val &= ~(0xff << 8); + val |= (prescaler & 0xff) << 8; + } + writel(val, &pwm->tcfg0); + val = readl(&pwm->tcfg1); + val &= ~(0xf << MUX_DIV_SHIFT(pwm_id)); + val |= (div & 0xf) << MUX_DIV_SHIFT(pwm_id); + writel(val, &pwm->tcfg1); + + if (pwm_id == 4) { + /* + * TODO(sjg): Use this as a countdown timer for now. We count + * down from the maximum value to 0, then reset. + */ + ticks_per_period = -1UL; + } else { + const unsigned long pwm_hz = 1000; + unsigned long timer_rate_hz = get_pwm_clk() / + ((prescaler + 1) * (1 << div)); + + ticks_per_period = timer_rate_hz / pwm_hz; + } + + /* set count value */ + offset = pwm_id * 3; + + writel(ticks_per_period, &pwm->tcntb0 + offset); + + val = readl(&pwm->tcon) & ~(0xf << TCON_OFFSET(pwm_id)); + if (invert && (pwm_id < 4)) + val |= TCON_INVERTER(pwm_id); + writel(val, &pwm->tcon); + + pwm_enable(pwm_id); + + return 0; +} diff --git a/arch/arm/cpu/armv7/s5p-common/sromc.c b/arch/arm/cpu/armv7/s5p-common/sromc.c new file mode 100644 index 0000000..091e8d1 --- /dev/null +++ b/arch/arm/cpu/armv7/s5p-common/sromc.c @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2010 Samsung Electronics + * Naveen Krishna Ch <ch.naveen@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sromc.h> + +/* + * s5p_config_sromc() - select the proper SROMC Bank and configure the + * band width control and bank control registers + * srom_bank - SROM + * srom_bw_conf - SMC Band witdh reg configuration value + * srom_bc_conf - SMC Bank Control reg configuration value + */ +void s5p_config_sromc(u32 srom_bank, u32 srom_bw_conf, u32 srom_bc_conf) +{ + u32 tmp; + struct s5p_sromc *srom = + (struct s5p_sromc *)samsung_get_base_sromc(); + + /* Configure SMC_BW register to handle proper SROMC bank */ + tmp = srom->bw; + tmp &= ~(0xF << (srom_bank * 4)); + tmp |= srom_bw_conf; + srom->bw = tmp; + + /* Configure SMC_BC register */ + srom->bc[srom_bank] = srom_bc_conf; +} diff --git a/arch/arm/cpu/armv7/s5p-common/timer.c b/arch/arm/cpu/armv7/s5p-common/timer.c new file mode 100644 index 0000000..637593c --- /dev/null +++ b/arch/arm/cpu/armv7/s5p-common/timer.c @@ -0,0 +1,148 @@ +/* + * Copyright (C) 2009 Samsung Electronics + * Heungjun Kim <riverful.kim@samsung.com> + * Inki Dae <inki.dae@samsung.com> + * Minkyu Kang <mk7.kang@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <div64.h> +#include <asm/io.h> +#include <asm/arch/pwm.h> +#include <asm/arch/clk.h> +#include <pwm.h> + +DECLARE_GLOBAL_DATA_PTR; + +unsigned long get_current_tick(void); + +/* macro to read the 16 bit timer */ +static inline struct s5p_timer *s5p_get_base_timer(void) +{ + return (struct s5p_timer *)samsung_get_base_timer(); +} + +/** + * Read the countdown timer. + * + * This operates at 1MHz and counts downwards. It will wrap about every + * hour (2^32 microseconds). + * + * @return current value of timer + */ +static unsigned long timer_get_us_down(void) +{ + struct s5p_timer *const timer = s5p_get_base_timer(); + + return readl(&timer->tcnto4); +} + +int timer_init(void) +{ + /* PWM Timer 4 */ + pwm_init(4, MUX_DIV_4, 0); + pwm_config(4, 100000, 100000); + pwm_enable(4); + + /* Use this as the current monotonic time in us */ + gd->arch.timer_reset_value = 0; + + /* Use this as the last timer value we saw */ + gd->arch.lastinc = timer_get_us_down(); + reset_timer_masked(); + + return 0; +} + +/* + * timer without interrupts + */ +unsigned long get_timer(unsigned long base) +{ + unsigned long long time_ms; + + ulong now = timer_get_us_down(); + + /* + * Increment the time by the amount elapsed since the last read. + * The timer may have wrapped around, but it makes no difference to + * our arithmetic here. + */ + gd->arch.timer_reset_value += gd->arch.lastinc - now; + gd->arch.lastinc = now; + + /* Divide by 1000 to convert from us to ms */ + time_ms = gd->arch.timer_reset_value; + do_div(time_ms, 1000); + return time_ms - base; +} + +unsigned long __attribute__((no_instrument_function)) timer_get_us(void) +{ + static unsigned long base_time_us; + + struct s5p_timer *const timer = + (struct s5p_timer *)samsung_get_base_timer(); + unsigned long now_downward_us = readl(&timer->tcnto4); + + if (!base_time_us) + base_time_us = now_downward_us; + + /* Note that this timer counts downward. */ + return base_time_us - now_downward_us; +} + +/* delay x useconds */ +void __udelay(unsigned long usec) +{ + unsigned long count_value; + + count_value = timer_get_us_down(); + while ((int)(count_value - timer_get_us_down()) < (int)usec) + ; +} + +void reset_timer_masked(void) +{ + struct s5p_timer *const timer = s5p_get_base_timer(); + + /* reset time */ + gd->arch.lastinc = readl(&timer->tcnto4); + gd->arch.tbl = 0; +} + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +unsigned long get_tbclk(void) +{ + return CONFIG_SYS_HZ; +} diff --git a/arch/arm/cpu/armv7/s5pc1xx/Makefile b/arch/arm/cpu/armv7/s5pc1xx/Makefile new file mode 100644 index 0000000..d66314e --- /dev/null +++ b/arch/arm/cpu/armv7/s5pc1xx/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +SOBJS = cache.o +SOBJS += reset.o + +COBJS += clock.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/s5pc1xx/cache.S b/arch/arm/cpu/armv7/s5pc1xx/cache.S new file mode 100644 index 0000000..000192c --- /dev/null +++ b/arch/arm/cpu/armv7/s5pc1xx/cache.S @@ -0,0 +1,46 @@ +/* + * Copyright (C) 2009 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * + * based on arch/arm/cpu/armv7/omap3/cache.S + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +.align 5 + +#include <linux/linkage.h> + +#ifndef CONFIG_SYS_L2CACHE_OFF +ENTRY(v7_outer_cache_enable) + push {r0, r1, r2, lr} + mrc 15, 0, r3, cr1, cr0, 1 + orr r3, r3, #2 + mcr 15, 0, r3, cr1, cr0, 1 + pop {r1, r2, r3, pc} +ENDPROC(v7_outer_cache_enable) + +ENTRY(v7_outer_cache_disable) + push {r0, r1, r2, lr} + mrc 15, 0, r3, cr1, cr0, 1 + bic r3, r3, #2 + mcr 15, 0, r3, cr1, cr0, 1 + pop {r1, r2, r3, pc} +ENDPROC(v7_outer_cache_disable) +#endif diff --git a/arch/arm/cpu/armv7/s5pc1xx/clock.c b/arch/arm/cpu/armv7/s5pc1xx/clock.c new file mode 100644 index 0000000..1c87e8f --- /dev/null +++ b/arch/arm/cpu/armv7/s5pc1xx/clock.c @@ -0,0 +1,343 @@ +/* + * Copyright (C) 2009 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * Heungjun Kim <riverful.kim@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/clk.h> + +#define CLK_M 0 +#define CLK_D 1 +#define CLK_P 2 + +#ifndef CONFIG_SYS_CLK_FREQ_C100 +#define CONFIG_SYS_CLK_FREQ_C100 12000000 +#endif +#ifndef CONFIG_SYS_CLK_FREQ_C110 +#define CONFIG_SYS_CLK_FREQ_C110 24000000 +#endif + +/* s5pc110: return pll clock frequency */ +static unsigned long s5pc100_get_pll_clk(int pllreg) +{ + struct s5pc100_clock *clk = + (struct s5pc100_clock *)samsung_get_base_clock(); + unsigned long r, m, p, s, mask, fout; + unsigned int freq; + + switch (pllreg) { + case APLL: + r = readl(&clk->apll_con); + break; + case MPLL: + r = readl(&clk->mpll_con); + break; + case EPLL: + r = readl(&clk->epll_con); + break; + case HPLL: + r = readl(&clk->hpll_con); + break; + default: + printf("Unsupported PLL (%d)\n", pllreg); + return 0; + } + + /* + * APLL_CON: MIDV [25:16] + * MPLL_CON: MIDV [23:16] + * EPLL_CON: MIDV [23:16] + * HPLL_CON: MIDV [23:16] + */ + if (pllreg == APLL) + mask = 0x3ff; + else + mask = 0x0ff; + + m = (r >> 16) & mask; + + /* PDIV [13:8] */ + p = (r >> 8) & 0x3f; + /* SDIV [2:0] */ + s = r & 0x7; + + /* FOUT = MDIV * FIN / (PDIV * 2^SDIV) */ + freq = CONFIG_SYS_CLK_FREQ_C100; + fout = m * (freq / (p * (1 << s))); + + return fout; +} + +/* s5pc100: return pll clock frequency */ +static unsigned long s5pc110_get_pll_clk(int pllreg) +{ + struct s5pc110_clock *clk = + (struct s5pc110_clock *)samsung_get_base_clock(); + unsigned long r, m, p, s, mask, fout; + unsigned int freq; + + switch (pllreg) { + case APLL: + r = readl(&clk->apll_con); + break; + case MPLL: + r = readl(&clk->mpll_con); + break; + case EPLL: + r = readl(&clk->epll_con); + break; + case VPLL: + r = readl(&clk->vpll_con); + break; + default: + printf("Unsupported PLL (%d)\n", pllreg); + return 0; + } + + /* + * APLL_CON: MIDV [25:16] + * MPLL_CON: MIDV [25:16] + * EPLL_CON: MIDV [24:16] + * VPLL_CON: MIDV [24:16] + */ + if (pllreg == APLL || pllreg == MPLL) + mask = 0x3ff; + else + mask = 0x1ff; + + m = (r >> 16) & mask; + + /* PDIV [13:8] */ + p = (r >> 8) & 0x3f; + /* SDIV [2:0] */ + s = r & 0x7; + + freq = CONFIG_SYS_CLK_FREQ_C110; + if (pllreg == APLL) { + if (s < 1) + s = 1; + /* FOUT = MDIV * FIN / (PDIV * 2^(SDIV - 1)) */ + fout = m * (freq / (p * (1 << (s - 1)))); + } else + /* FOUT = MDIV * FIN / (PDIV * 2^SDIV) */ + fout = m * (freq / (p * (1 << s))); + + return fout; +} + +/* s5pc110: return ARM clock frequency */ +static unsigned long s5pc110_get_arm_clk(void) +{ + struct s5pc110_clock *clk = + (struct s5pc110_clock *)samsung_get_base_clock(); + unsigned long div; + unsigned long dout_apll, armclk; + unsigned int apll_ratio; + + div = readl(&clk->div0); + + /* APLL_RATIO: [2:0] */ + apll_ratio = div & 0x7; + + dout_apll = get_pll_clk(APLL) / (apll_ratio + 1); + armclk = dout_apll; + + return armclk; +} + +/* s5pc100: return ARM clock frequency */ +static unsigned long s5pc100_get_arm_clk(void) +{ + struct s5pc100_clock *clk = + (struct s5pc100_clock *)samsung_get_base_clock(); + unsigned long div; + unsigned long dout_apll, armclk; + unsigned int apll_ratio, arm_ratio; + + div = readl(&clk->div0); + + /* ARM_RATIO: [6:4] */ + arm_ratio = (div >> 4) & 0x7; + /* APLL_RATIO: [0] */ + apll_ratio = div & 0x1; + + dout_apll = get_pll_clk(APLL) / (apll_ratio + 1); + armclk = dout_apll / (arm_ratio + 1); + + return armclk; +} + +/* s5pc100: return HCLKD0 frequency */ +static unsigned long get_hclk(void) +{ + struct s5pc100_clock *clk = + (struct s5pc100_clock *)samsung_get_base_clock(); + unsigned long hclkd0; + uint div, d0_bus_ratio; + + div = readl(&clk->div0); + /* D0_BUS_RATIO: [10:8] */ + d0_bus_ratio = (div >> 8) & 0x7; + + hclkd0 = get_arm_clk() / (d0_bus_ratio + 1); + + return hclkd0; +} + +/* s5pc100: return PCLKD1 frequency */ +static unsigned long get_pclkd1(void) +{ + struct s5pc100_clock *clk = + (struct s5pc100_clock *)samsung_get_base_clock(); + unsigned long d1_bus, pclkd1; + uint div, d1_bus_ratio, pclkd1_ratio; + + div = readl(&clk->div0); + /* D1_BUS_RATIO: [14:12] */ + d1_bus_ratio = (div >> 12) & 0x7; + /* PCLKD1_RATIO: [18:16] */ + pclkd1_ratio = (div >> 16) & 0x7; + + /* ASYNC Mode */ + d1_bus = get_pll_clk(MPLL) / (d1_bus_ratio + 1); + pclkd1 = d1_bus / (pclkd1_ratio + 1); + + return pclkd1; +} + +/* s5pc110: return HCLKs frequency */ +static unsigned long get_hclk_sys(int dom) +{ + struct s5pc110_clock *clk = + (struct s5pc110_clock *)samsung_get_base_clock(); + unsigned long hclk; + unsigned int div; + unsigned int offset; + unsigned int hclk_sys_ratio; + + if (dom == CLK_M) + return get_hclk(); + + div = readl(&clk->div0); + + /* + * HCLK_MSYS_RATIO: [10:8] + * HCLK_DSYS_RATIO: [19:16] + * HCLK_PSYS_RATIO: [27:24] + */ + offset = 8 + (dom << 0x3); + + hclk_sys_ratio = (div >> offset) & 0xf; + + hclk = get_pll_clk(MPLL) / (hclk_sys_ratio + 1); + + return hclk; +} + +/* s5pc110: return PCLKs frequency */ +static unsigned long get_pclk_sys(int dom) +{ + struct s5pc110_clock *clk = + (struct s5pc110_clock *)samsung_get_base_clock(); + unsigned long pclk; + unsigned int div; + unsigned int offset; + unsigned int pclk_sys_ratio; + + div = readl(&clk->div0); + + /* + * PCLK_MSYS_RATIO: [14:12] + * PCLK_DSYS_RATIO: [22:20] + * PCLK_PSYS_RATIO: [30:28] + */ + offset = 12 + (dom << 0x3); + + pclk_sys_ratio = (div >> offset) & 0x7; + + pclk = get_hclk_sys(dom) / (pclk_sys_ratio + 1); + + return pclk; +} + +/* s5pc110: return peripheral clock frequency */ +static unsigned long s5pc110_get_pclk(void) +{ + return get_pclk_sys(CLK_P); +} + +/* s5pc100: return peripheral clock frequency */ +static unsigned long s5pc100_get_pclk(void) +{ + return get_pclkd1(); +} + +/* s5pc1xx: return uart clock frequency */ +static unsigned long s5pc1xx_get_uart_clk(int dev_index) +{ + if (cpu_is_s5pc110()) + return s5pc110_get_pclk(); + else + return s5pc100_get_pclk(); +} + +/* s5pc1xx: return pwm clock frequency */ +static unsigned long s5pc1xx_get_pwm_clk(void) +{ + if (cpu_is_s5pc110()) + return s5pc110_get_pclk(); + else + return s5pc100_get_pclk(); +} + +unsigned long get_pll_clk(int pllreg) +{ + if (cpu_is_s5pc110()) + return s5pc110_get_pll_clk(pllreg); + else + return s5pc100_get_pll_clk(pllreg); +} + +unsigned long get_arm_clk(void) +{ + if (cpu_is_s5pc110()) + return s5pc110_get_arm_clk(); + else + return s5pc100_get_arm_clk(); +} + +unsigned long get_pwm_clk(void) +{ + return s5pc1xx_get_pwm_clk(); +} + +unsigned long get_uart_clk(int dev_index) +{ + return s5pc1xx_get_uart_clk(dev_index); +} + +void set_mmc_clk(int dev_index, unsigned int div) +{ + /* Do NOTHING */ +} diff --git a/arch/arm/cpu/armv7/s5pc1xx/reset.S b/arch/arm/cpu/armv7/s5pc1xx/reset.S new file mode 100644 index 0000000..c7a41d0 --- /dev/null +++ b/arch/arm/cpu/armv7/s5pc1xx/reset.S @@ -0,0 +1,48 @@ +/* + * Copyright (c) 2009 Samsung Electronics. + * Minkyu Kang <mk7.kang@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/arch/cpu.h> +#include <linux/linkage.h> + +#define S5PC100_SWRESET 0xE0200000 +#define S5PC110_SWRESET 0xE0102000 + +ENTRY(reset_cpu) + ldr r1, =S5PC100_PRO_ID + ldr r2, [r1] + ldr r4, =0x00010000 + and r4, r2, r4 + cmp r4, #0 + bne 110f + /* S5PC100 */ + ldr r1, =S5PC100_SWRESET + ldr r2, =0xC100 + b 200f +110: /* S5PC110 */ + ldr r1, =S5PC110_SWRESET + mov r2, #1 +200: + str r2, [r1] +_loop_forever: + b _loop_forever +ENDPROC(reset_cpu) diff --git a/arch/arm/cpu/armv7/socfpga/Makefile b/arch/arm/cpu/armv7/socfpga/Makefile new file mode 100644 index 0000000..376a4bd --- /dev/null +++ b/arch/arm/cpu/armv7/socfpga/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# Copyright (C) 2012 Altera Corporation <www.altera.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +SOBJS := lowlevel_init.o +COBJS-y := misc.o timer.o +COBJS-$(CONFIG_SPL_BUILD) += spl.o + +COBJS := $(COBJS-y) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/socfpga/config.mk b/arch/arm/cpu/armv7/socfpga/config.mk new file mode 100644 index 0000000..b72ed1e --- /dev/null +++ b/arch/arm/cpu/armv7/socfpga/config.mk @@ -0,0 +1,16 @@ +# +# Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed "as is" WITHOUT ANY WARRANTY of any +# kind, whether express or implied; without even the implied warranty +# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +ifndef CONFIG_SPL_BUILD +ALL-y += $(obj)u-boot.img +endif diff --git a/arch/arm/cpu/armv7/socfpga/lowlevel_init.S b/arch/arm/cpu/armv7/socfpga/lowlevel_init.S new file mode 100644 index 0000000..001b37d --- /dev/null +++ b/arch/arm/cpu/armv7/socfpga/lowlevel_init.S @@ -0,0 +1,77 @@ +/* + * Copyright (C) 2012 Altera Corporation <www.altera.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <config.h> +#include <version.h> + +/* Save the parameter pass in by previous boot loader */ +.global save_boot_params +save_boot_params: + /* save the parameter here */ + + /* + * Setup stack for exception, which is located + * at the end of on-chip RAM. We don't expect exception prior to + * relocation and if that happens, we won't worry -- it will overide + * global data region as the code will goto reset. After relocation, + * this region won't be used by other part of program. + * Hence it is safe. + */ + ldr r0, =(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE) + ldr r1, =IRQ_STACK_START_IN + str r0, [r1] + + bx lr + + +/* Set up the platform, once the cpu has been initialized */ +.globl lowlevel_init +lowlevel_init: + + /* Remap */ +#ifdef CONFIG_SPL_BUILD + /* + * SPL : configure the remap (L3 NIC-301 GPV) + * so the on-chip RAM at lower memory instead ROM. + */ + ldr r0, =SOCFPGA_L3REGS_ADDRESS + mov r1, #0x19 + str r1, [r0] +#else + /* + * U-Boot : configure the remap (L3 NIC-301 GPV) + * so the SDRAM at lower memory instead on-chip RAM. + */ + ldr r0, =SOCFPGA_L3REGS_ADDRESS + mov r1, #0x2 + str r1, [r0] + + /* Private components security */ + + /* + * U-Boot : configure private timer, global timer and cpu + * component access as non secure for kernel stage (as required + * by kernel) + */ + mrc p15,4,r0,c15,c0,0 + add r1, r0, #0x54 + ldr r2, [r1] + orr r2, r2, #0xff + orr r2, r2, #0xf00 + str r2, [r1] +#endif /* #ifdef CONFIG_SPL_BUILD */ + mov pc, lr diff --git a/arch/arm/cpu/armv7/socfpga/misc.c b/arch/arm/cpu/armv7/socfpga/misc.c new file mode 100644 index 0000000..fa16424 --- /dev/null +++ b/arch/arm/cpu/armv7/socfpga/misc.c @@ -0,0 +1,54 @@ +/* + * Copyright (C) 2012 Altera Corporation <www.altera.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/reset_manager.h> + +DECLARE_GLOBAL_DATA_PTR; + +static const struct socfpga_reset_manager *reset_manager_base = + (void *)SOCFPGA_RSTMGR_ADDRESS; + +/* + * Write the reset manager register to cause reset + */ +void reset_cpu(ulong addr) +{ + /* request a warm reset */ + writel(RSTMGR_CTRL_SWWARMRSTREQ_LSB, &reset_manager_base->ctrl); + /* + * infinite loop here as watchdog will trigger and reset + * the processor + */ + while (1) + ; +} + +/* + * Release peripherals from reset based on handoff + */ +void reset_deassert_peripherals_handoff(void) +{ + writel(0, &reset_manager_base->per_mod_reset); +} + +int dram_init(void) +{ + gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); + return 0; +} diff --git a/arch/arm/cpu/armv7/socfpga/spl.c b/arch/arm/cpu/armv7/socfpga/spl.c new file mode 100644 index 0000000..84216eb --- /dev/null +++ b/arch/arm/cpu/armv7/socfpga/spl.c @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2012 Altera Corporation <www.altera.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/u-boot.h> +#include <asm/utils.h> +#include <version.h> +#include <image.h> +#include <asm/arch/reset_manager.h> +#include <spl.h> + +DECLARE_GLOBAL_DATA_PTR; + +u32 spl_boot_device(void) +{ + return BOOT_DEVICE_RAM; +} + +/* + * Board initialization after bss clearance + */ +void spl_board_init(void) +{ + /* de-assert reset for peripherals and bridges based on handoff */ + reset_deassert_peripherals_handoff(); + + /* enable console uart printing */ + preloader_console_init(); +} diff --git a/arch/arm/cpu/armv7/socfpga/timer.c b/arch/arm/cpu/armv7/socfpga/timer.c new file mode 100644 index 0000000..efa28c2 --- /dev/null +++ b/arch/arm/cpu/armv7/socfpga/timer.c @@ -0,0 +1,105 @@ +/* + * Copyright (C) 2012 Altera Corporation <www.altera.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/timer.h> + +DECLARE_GLOBAL_DATA_PTR; + +static const struct socfpga_timer *timer_base = (void *)CONFIG_SYS_TIMERBASE; + +/* + * Timer initialization + */ +int timer_init(void) +{ + writel(TIMER_LOAD_VAL, &timer_base->load_val); + writel(TIMER_LOAD_VAL, &timer_base->curr_val); + writel(readl(&timer_base->ctrl) | 0x3, &timer_base->ctrl); + return 0; +} + +static u32 read_timer(void) +{ + return readl(&timer_base->curr_val); +} + +/* + * Delay x useconds + */ +void __udelay(unsigned long usec) +{ + unsigned long now, last; + /* + * get the tmo value based on timer clock speed + * tmo = delay required / period of timer clock + */ + long tmo = usec * CONFIG_TIMER_CLOCK_KHZ / 1000; + + last = read_timer(); + while (tmo > 0) { + now = read_timer(); + if (last >= now) + /* normal mode (non roll) */ + tmo -= last - now; + else + /* we have overflow of the count down timer */ + tmo -= TIMER_LOAD_VAL - last + now; + last = now; + } +} + +/* + * Get the timer value + */ +ulong get_timer(ulong base) +{ + return get_timer_masked() - base; +} + +/* + * Timer : get the time difference + * Unit of tick is based on the CONFIG_SYS_HZ + */ +ulong get_timer_masked(void) +{ + /* current tick value */ + ulong now = read_timer() / (CONFIG_TIMER_CLOCK_KHZ/CONFIG_SYS_HZ); + if (gd->arch.lastinc >= now) { + /* normal mode (non roll) */ + /* move stamp forward with absolute diff ticks */ + gd->arch.tbl += gd->arch.lastinc - now; + } else { + /* we have overflow of the count down timer */ + gd->arch.tbl += TIMER_LOAD_VAL - gd->arch.lastinc + now; + } + gd->arch.lastinc = now; + return gd->arch.tbl; +} + +/* + * Reset the timer + */ +void reset_timer(void) +{ + /* capture current decrementer value time */ + gd->arch.lastinc = read_timer() / + (CONFIG_TIMER_CLOCK_KHZ / CONFIG_SYS_HZ); + /* start "advancing" time stamp from 0 */ + gd->arch.tbl = 0; +} diff --git a/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds b/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds new file mode 100644 index 0000000..15f8c01 --- /dev/null +++ b/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2012 Altera Corporation <www.altera.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +MEMORY { .sdram : ORIGIN = (0), LENGTH = (0xffffffff) } + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + arch/arm/cpu/armv7/start.o (.text*) + *(.text*) + } >.sdram + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } >.sdram + + . = ALIGN(4); + .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sdram + + . = ALIGN(4); + __image_copy_end = .; + _end = .; + + .bss : { + . = ALIGN(4); + __bss_start = .; + *(.bss*) + . = ALIGN(4); + __bss_end = .; + } >.sdram + + . = ALIGN(8); + __malloc_start = .; + . = . + CONFIG_SPL_MALLOC_SIZE; + __malloc_end = .; + + . = . + CONFIG_SPL_STACK_SIZE; + . = ALIGN(8); + __stack_start = .; +} diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S new file mode 100644 index 0000000..8e9cb19 --- /dev/null +++ b/arch/arm/cpu/armv7/start.S @@ -0,0 +1,471 @@ +/* + * armboot - Startup Code for OMAP3530/ARM Cortex CPU-core + * + * Copyright (c) 2004 Texas Instruments <r-woodruff2@ti.com> + * + * Copyright (c) 2001 Marius Gröger <mag@sysgo.de> + * Copyright (c) 2002 Alex Züpke <azu@sysgo.de> + * Copyright (c) 2002 Gary Jennejohn <garyj@denx.de> + * Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com> + * Copyright (c) 2003 Kshitij <kshitij@ti.com> + * Copyright (c) 2006-2008 Syed Mohammed Khasim <x0khasim@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm-offsets.h> +#include <config.h> +#include <version.h> +#include <asm/system.h> +#include <linux/linkage.h> + +.globl _start +_start: b reset + ldr pc, _undefined_instruction + ldr pc, _software_interrupt + ldr pc, _prefetch_abort + ldr pc, _data_abort + ldr pc, _not_used + ldr pc, _irq + ldr pc, _fiq +#ifdef CONFIG_SPL_BUILD +_undefined_instruction: .word _undefined_instruction +_software_interrupt: .word _software_interrupt +_prefetch_abort: .word _prefetch_abort +_data_abort: .word _data_abort +_not_used: .word _not_used +_irq: .word _irq +_fiq: .word _fiq +_pad: .word 0x12345678 /* now 16*4=64 */ +#else +_undefined_instruction: .word undefined_instruction +_software_interrupt: .word software_interrupt +_prefetch_abort: .word prefetch_abort +_data_abort: .word data_abort +_not_used: .word not_used +_irq: .word irq +_fiq: .word fiq +_pad: .word 0x12345678 /* now 16*4=64 */ +#endif /* CONFIG_SPL_BUILD */ + +.global _end_vect +_end_vect: + + .balignl 16,0xdeadbeef +/************************************************************************* + * + * Startup Code (reset vector) + * + * do important init only if we don't start from memory! + * setup Memory and board specific bits prior to relocation. + * relocate armboot to ram + * setup stack + * + *************************************************************************/ + +.globl _TEXT_BASE +_TEXT_BASE: +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) + .word CONFIG_SPL_TEXT_BASE +#else + .word CONFIG_SYS_TEXT_BASE +#endif + +/* + * These are defined in the board-specific linker script. + */ +.globl _bss_start_ofs +_bss_start_ofs: + .word __bss_start - _start + +.globl _bss_end_ofs +_bss_end_ofs: + .word __bss_end - _start + +.globl _end_ofs +_end_ofs: + .word _end - _start + +#ifdef CONFIG_USE_IRQ +/* IRQ stack memory (calculated at run-time) */ +.globl IRQ_STACK_START +IRQ_STACK_START: + .word 0x0badc0de + +/* IRQ stack memory (calculated at run-time) */ +.globl FIQ_STACK_START +FIQ_STACK_START: + .word 0x0badc0de +#endif + +/* IRQ stack memory (calculated at run-time) + 8 bytes */ +.globl IRQ_STACK_START_IN +IRQ_STACK_START_IN: + .word 0x0badc0de + +/* + * the actual reset code + */ + +reset: + bl save_boot_params + /* + * disable interrupts (FIQ and IRQ), also set the cpu to SVC32 mode, + * except if in HYP mode already + */ + mrs r0, cpsr + and r1, r0, #0x1f @ mask mode bits + teq r1, #0x1a @ test for HYP mode + bicne r0, r0, #0x1f @ clear all mode bits + orrne r0, r0, #0x13 @ set SVC mode + orr r0, r0, #0xc0 @ disable FIQ and IRQ + msr cpsr,r0 + +/* + * Setup vector: + * (OMAP4 spl TEXT_BASE is not 32 byte aligned. + * Continue to use ROM code vector only in OMAP4 spl) + */ +#if !(defined(CONFIG_OMAP44XX) && defined(CONFIG_SPL_BUILD)) + /* Set V=0 in CP15 SCTRL register - for VBAR to point to vector */ + mrc p15, 0, r0, c1, c0, 0 @ Read CP15 SCTRL Register + bic r0, #CR_V @ V = 0 + mcr p15, 0, r0, c1, c0, 0 @ Write CP15 SCTRL Register + + /* Set vector address in CP15 VBAR register */ + ldr r0, =_start + mcr p15, 0, r0, c12, c0, 0 @Set VBAR +#endif + + /* the mask ROM code should have PLL and others stable */ +#ifndef CONFIG_SKIP_LOWLEVEL_INIT + bl cpu_init_cp15 + bl cpu_init_crit +#endif + + bl _main + +/*------------------------------------------------------------------------------*/ + +ENTRY(c_runtime_cpu_setup) +/* + * If I-cache is enabled invalidate it + */ +#ifndef CONFIG_SYS_ICACHE_OFF + mcr p15, 0, r0, c7, c5, 0 @ invalidate icache + mcr p15, 0, r0, c7, c10, 4 @ DSB + mcr p15, 0, r0, c7, c5, 4 @ ISB +#endif +/* + * Move vector table + */ + /* Set vector address in CP15 VBAR register */ + ldr r0, =_start + mcr p15, 0, r0, c12, c0, 0 @Set VBAR + + bx lr + +ENDPROC(c_runtime_cpu_setup) + +/************************************************************************* + * + * void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) + * __attribute__((weak)); + * + * Stack pointer is not yet initialized at this moment + * Don't save anything to stack even if compiled with -O0 + * + *************************************************************************/ +ENTRY(save_boot_params) + bx lr @ back to my caller +ENDPROC(save_boot_params) + .weak save_boot_params + +/************************************************************************* + * + * cpu_init_cp15 + * + * Setup CP15 registers (cache, MMU, TLBs). The I-cache is turned on unless + * CONFIG_SYS_ICACHE_OFF is defined. + * + *************************************************************************/ +ENTRY(cpu_init_cp15) + /* + * Invalidate L1 I/D + */ + mov r0, #0 @ set up for MCR + mcr p15, 0, r0, c8, c7, 0 @ invalidate TLBs + mcr p15, 0, r0, c7, c5, 0 @ invalidate icache + mcr p15, 0, r0, c7, c5, 6 @ invalidate BP array + mcr p15, 0, r0, c7, c10, 4 @ DSB + mcr p15, 0, r0, c7, c5, 4 @ ISB + + /* + * disable MMU stuff and caches + */ + mrc p15, 0, r0, c1, c0, 0 + bic r0, r0, #0x00002000 @ clear bits 13 (--V-) + bic r0, r0, #0x00000007 @ clear bits 2:0 (-CAM) + orr r0, r0, #0x00000002 @ set bit 1 (--A-) Align + orr r0, r0, #0x00000800 @ set bit 11 (Z---) BTB +#ifdef CONFIG_SYS_ICACHE_OFF + bic r0, r0, #0x00001000 @ clear bit 12 (I) I-cache +#else + orr r0, r0, #0x00001000 @ set bit 12 (I) I-cache +#endif + mcr p15, 0, r0, c1, c0, 0 + +#ifdef CONFIG_ARM_ERRATA_716044 + mrc p15, 0, r0, c1, c0, 0 @ read system control register + orr r0, r0, #1 << 11 @ set bit #11 + mcr p15, 0, r0, c1, c0, 0 @ write system control register +#endif + +#ifdef CONFIG_ARM_ERRATA_742230 + mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register + orr r0, r0, #1 << 4 @ set bit #4 + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register +#endif + +#ifdef CONFIG_ARM_ERRATA_743622 + mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register + orr r0, r0, #1 << 6 @ set bit #6 + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register +#endif + +#ifdef CONFIG_ARM_ERRATA_751472 + mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register + orr r0, r0, #1 << 11 @ set bit #11 + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register +#endif + + mov pc, lr @ back to my caller +ENDPROC(cpu_init_cp15) + +#ifndef CONFIG_SKIP_LOWLEVEL_INIT +/************************************************************************* + * + * CPU_init_critical registers + * + * setup important registers + * setup memory timing + * + *************************************************************************/ +ENTRY(cpu_init_crit) + /* + * Jump to board specific initialization... + * The Mask ROM will have already initialized + * basic memory. Go here to bump up clock rate and handle + * wake up conditions. + */ + b lowlevel_init @ go setup pll,mux,memory +ENDPROC(cpu_init_crit) +#endif + +#ifndef CONFIG_SPL_BUILD +/* + ************************************************************************* + * + * Interrupt handling + * + ************************************************************************* + */ +@ +@ IRQ stack frame. +@ +#define S_FRAME_SIZE 72 + +#define S_OLD_R0 68 +#define S_PSR 64 +#define S_PC 60 +#define S_LR 56 +#define S_SP 52 + +#define S_IP 48 +#define S_FP 44 +#define S_R10 40 +#define S_R9 36 +#define S_R8 32 +#define S_R7 28 +#define S_R6 24 +#define S_R5 20 +#define S_R4 16 +#define S_R3 12 +#define S_R2 8 +#define S_R1 4 +#define S_R0 0 + +#define MODE_SVC 0x13 +#define I_BIT 0x80 + +/* + * use bad_save_user_regs for abort/prefetch/undef/swi ... + * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling + */ + + .macro bad_save_user_regs + sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current + @ user stack + stmia sp, {r0 - r12} @ Save user registers (now in + @ svc mode) r0-r12 + ldr r2, IRQ_STACK_START_IN @ set base 2 words into abort + @ stack + ldmia r2, {r2 - r3} @ get values for "aborted" pc + @ and cpsr (into parm regs) + add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack + + add r5, sp, #S_SP + mov r1, lr + stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr + mov r0, sp @ save current stack into r0 + @ (param register) + .endm + + .macro irq_save_user_regs + sub sp, sp, #S_FRAME_SIZE + stmia sp, {r0 - r12} @ Calling r0-r12 + add r8, sp, #S_PC @ !! R8 NEEDS to be saved !! + @ a reserved stack spot would + @ be good. + stmdb r8, {sp, lr}^ @ Calling SP, LR + str lr, [r8, #0] @ Save calling PC + mrs r6, spsr + str r6, [r8, #4] @ Save CPSR + str r0, [r8, #8] @ Save OLD_R0 + mov r0, sp + .endm + + .macro irq_restore_user_regs + ldmia sp, {r0 - lr}^ @ Calling r0 - lr + mov r0, r0 + ldr lr, [sp, #S_PC] @ Get PC + add sp, sp, #S_FRAME_SIZE + subs pc, lr, #4 @ return & move spsr_svc into + @ cpsr + .endm + + .macro get_bad_stack + ldr r13, IRQ_STACK_START_IN @ setup our mode stack (enter + @ in banked mode) + + str lr, [r13] @ save caller lr in position 0 + @ of saved stack + mrs lr, spsr @ get the spsr + str lr, [r13, #4] @ save spsr in position 1 of + @ saved stack + + mov r13, #MODE_SVC @ prepare SVC-Mode + @ msr spsr_c, r13 + msr spsr, r13 @ switch modes, make sure + @ moves will execute + mov lr, pc @ capture return pc + movs pc, lr @ jump to next instruction & + @ switch modes. + .endm + + .macro get_bad_stack_swi + sub r13, r13, #4 @ space on current stack for + @ scratch reg. + str r0, [r13] @ save R0's value. + ldr r0, IRQ_STACK_START_IN @ get data regions start + @ spots for abort stack + str lr, [r0] @ save caller lr in position 0 + @ of saved stack + mrs lr, spsr @ get the spsr + str lr, [r0, #4] @ save spsr in position 1 of + @ saved stack + ldr lr, [r0] @ restore lr + ldr r0, [r13] @ restore r0 + add r13, r13, #4 @ pop stack entry + .endm + + .macro get_irq_stack @ setup IRQ stack + ldr sp, IRQ_STACK_START + .endm + + .macro get_fiq_stack @ setup FIQ stack + ldr sp, FIQ_STACK_START + .endm + +/* + * exception handlers + */ + .align 5 +undefined_instruction: + get_bad_stack + bad_save_user_regs + bl do_undefined_instruction + + .align 5 +software_interrupt: + get_bad_stack_swi + bad_save_user_regs + bl do_software_interrupt + + .align 5 +prefetch_abort: + get_bad_stack + bad_save_user_regs + bl do_prefetch_abort + + .align 5 +data_abort: + get_bad_stack + bad_save_user_regs + bl do_data_abort + + .align 5 +not_used: + get_bad_stack + bad_save_user_regs + bl do_not_used + +#ifdef CONFIG_USE_IRQ + + .align 5 +irq: + get_irq_stack + irq_save_user_regs + bl do_irq + irq_restore_user_regs + + .align 5 +fiq: + get_fiq_stack + /* someone ought to write a more effective fiq_save_user_regs */ + irq_save_user_regs + bl do_fiq + irq_restore_user_regs + +#else + + .align 5 +irq: + get_bad_stack + bad_save_user_regs + bl do_irq + + .align 5 +fiq: + get_bad_stack + bad_save_user_regs + bl do_fiq + +#endif /* CONFIG_USE_IRQ */ +#endif /* CONFIG_SPL_BUILD */ diff --git a/arch/arm/cpu/armv7/syslib.c b/arch/arm/cpu/armv7/syslib.c new file mode 100644 index 0000000..84d17f0 --- /dev/null +++ b/arch/arm/cpu/armv7/syslib.c @@ -0,0 +1,69 @@ +/* + * (C) Copyright 2008 + * Texas Instruments, <www.ti.com> + * + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> + +/************************************************************ + * sdelay() - simple spin loop. Will be constant time as + * its generally used in bypass conditions only. This + * is necessary until timers are accessible. + * + * not inline to increase chances its in cache when called + *************************************************************/ +void sdelay(unsigned long loops) +{ + __asm__ volatile ("1:\n" "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0"(loops)); +} + +/***************************************************************** + * sr32 - clear & set a value in a bit range for a 32 bit address + *****************************************************************/ +void sr32(void *addr, u32 start_bit, u32 num_bits, u32 value) +{ + u32 tmp, msk = 0; + msk = 1 << num_bits; + --msk; + tmp = readl((u32)addr) & ~(msk << start_bit); + tmp |= value << start_bit; + writel(tmp, (u32)addr); +} + +/********************************************************************* + * wait_on_value() - common routine to allow waiting for changes in + * volatile regs. + *********************************************************************/ +u32 wait_on_value(u32 read_bit_mask, u32 match_value, void *read_addr, + u32 bound) +{ + u32 i = 0, val; + do { + ++i; + val = readl((u32)read_addr) & read_bit_mask; + if (val == match_value) + return 1; + if (i == bound) + return 0; + } while (1); +} diff --git a/arch/arm/cpu/armv7/tegra-common/Makefile b/arch/arm/cpu/armv7/tegra-common/Makefile new file mode 100644 index 0000000..f4961fa --- /dev/null +++ b/arch/arm/cpu/armv7/tegra-common/Makefile @@ -0,0 +1,48 @@ +# +# (C) Copyright 2010,2011 Nvidia Corporation. +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)libtegra-common.o + +COBJS-$(CONFIG_CMD_ENTERRCM) += cmd_enterrcm.o + +COBJS := $(COBJS-y) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/tegra-common/cmd_enterrcm.c b/arch/arm/cpu/armv7/tegra-common/cmd_enterrcm.c new file mode 100644 index 0000000..f74ddcb --- /dev/null +++ b/arch/arm/cpu/armv7/tegra-common/cmd_enterrcm.c @@ -0,0 +1,65 @@ +/* + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * + * Derived from code (arch/arm/lib/reset.c) that is: + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Alex Zuepke <azu@sysgo.de> + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * + * (C) Copyright 2004 + * DAVE Srl + * http://www.dave-tech.it + * http://www.wawnet.biz + * mailto:info@wawnet.biz + * + * (C) Copyright 2004 Texas Insturments + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <common.h> +#include <asm/arch/tegra.h> +#include <asm/arch-tegra/pmc.h> + +static int do_enterrcm(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; + + puts("Entering RCM...\n"); + udelay(50000); + + pmc->pmc_scratch0 = 2; + disable_interrupts(); + reset_cpu(0); + + return 0; +} + +U_BOOT_CMD( + enterrcm, 1, 0, do_enterrcm, + "reset Tegra and enter USB Recovery Mode", + "" +); diff --git a/arch/arm/cpu/armv7/tegra114/Makefile b/arch/arm/cpu/armv7/tegra114/Makefile new file mode 100644 index 0000000..eb98c8e --- /dev/null +++ b/arch/arm/cpu/armv7/tegra114/Makefile @@ -0,0 +1,40 @@ +# +# Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms and conditions of the GNU General Public License, +# version 2, as published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS := $(COBJS-y) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/tegra114/config.mk b/arch/arm/cpu/armv7/tegra114/config.mk new file mode 100644 index 0000000..cb1a19d --- /dev/null +++ b/arch/arm/cpu/armv7/tegra114/config.mk @@ -0,0 +1,19 @@ +# +# Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> +# +# This program is free software; you can redistribute it and/or modify it +# under the terms and conditions of the GNU General Public License, +# version 2, as published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# +CONFIG_ARCH_DEVICE_TREE := tegra114 diff --git a/arch/arm/cpu/armv7/tegra20/Makefile b/arch/arm/cpu/armv7/tegra20/Makefile new file mode 100644 index 0000000..c8a8504 --- /dev/null +++ b/arch/arm/cpu/armv7/tegra20/Makefile @@ -0,0 +1,49 @@ +# +# (C) Copyright 2010,2011 Nvidia Corporation. +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS-$(CONFIG_PWM_TEGRA) += pwm.o +COBJS-$(CONFIG_VIDEO_TEGRA) += display.o + +COBJS := $(COBJS-y) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/tegra20/config.mk b/arch/arm/cpu/armv7/tegra20/config.mk new file mode 100644 index 0000000..6432e75 --- /dev/null +++ b/arch/arm/cpu/armv7/tegra20/config.mk @@ -0,0 +1,26 @@ +# +# (C) Copyright 2010,2011 +# NVIDIA Corporation <www.nvidia.com> +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +CONFIG_ARCH_DEVICE_TREE := tegra20 diff --git a/arch/arm/cpu/armv7/tegra20/display.c b/arch/arm/cpu/armv7/tegra20/display.c new file mode 100644 index 0000000..031f9a8 --- /dev/null +++ b/arch/arm/cpu/armv7/tegra20/display.c @@ -0,0 +1,409 @@ +/* + * (C) Copyright 2010 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/tegra.h> +#include <asm/arch/display.h> +#include <asm/arch/dc.h> +#include <asm/arch-tegra/clk_rst.h> +#include <asm/arch-tegra/timer.h> + +static struct fdt_disp_config config; + +static void update_window(struct dc_ctlr *dc, struct disp_ctl_win *win) +{ + unsigned h_dda, v_dda; + unsigned long val; + + val = readl(&dc->cmd.disp_win_header); + val |= WINDOW_A_SELECT; + writel(val, &dc->cmd.disp_win_header); + + writel(win->fmt, &dc->win.color_depth); + + clrsetbits_le32(&dc->win.byte_swap, BYTE_SWAP_MASK, + BYTE_SWAP_NOSWAP << BYTE_SWAP_SHIFT); + + val = win->out_x << H_POSITION_SHIFT; + val |= win->out_y << V_POSITION_SHIFT; + writel(val, &dc->win.pos); + + val = win->out_w << H_SIZE_SHIFT; + val |= win->out_h << V_SIZE_SHIFT; + writel(val, &dc->win.size); + + val = (win->w * win->bpp / 8) << H_PRESCALED_SIZE_SHIFT; + val |= win->h << V_PRESCALED_SIZE_SHIFT; + writel(val, &dc->win.prescaled_size); + + writel(0, &dc->win.h_initial_dda); + writel(0, &dc->win.v_initial_dda); + + h_dda = (win->w * 0x1000) / max(win->out_w - 1, 1); + v_dda = (win->h * 0x1000) / max(win->out_h - 1, 1); + + val = h_dda << H_DDA_INC_SHIFT; + val |= v_dda << V_DDA_INC_SHIFT; + writel(val, &dc->win.dda_increment); + + writel(win->stride, &dc->win.line_stride); + writel(0, &dc->win.buf_stride); + + val = WIN_ENABLE; + if (win->bpp < 24) + val |= COLOR_EXPAND; + writel(val, &dc->win.win_opt); + + writel((unsigned long)win->phys_addr, &dc->winbuf.start_addr); + writel(win->x, &dc->winbuf.addr_h_offset); + writel(win->y, &dc->winbuf.addr_v_offset); + + writel(0xff00, &dc->win.blend_nokey); + writel(0xff00, &dc->win.blend_1win); + + val = GENERAL_ACT_REQ | WIN_A_ACT_REQ; + val |= GENERAL_UPDATE | WIN_A_UPDATE; + writel(val, &dc->cmd.state_ctrl); +} + +static void write_pair(struct fdt_disp_config *config, int item, u32 *reg) +{ + writel(config->horiz_timing[item] | + (config->vert_timing[item] << 16), reg); +} + +static int update_display_mode(struct dc_disp_reg *disp, + struct fdt_disp_config *config) +{ + unsigned long val; + unsigned long rate; + unsigned long div; + + writel(0x0, &disp->disp_timing_opt); + write_pair(config, FDT_LCD_TIMING_REF_TO_SYNC, &disp->ref_to_sync); + write_pair(config, FDT_LCD_TIMING_SYNC_WIDTH, &disp->sync_width); + write_pair(config, FDT_LCD_TIMING_BACK_PORCH, &disp->back_porch); + write_pair(config, FDT_LCD_TIMING_FRONT_PORCH, &disp->front_porch); + + writel(config->width | (config->height << 16), &disp->disp_active); + + val = DE_SELECT_ACTIVE << DE_SELECT_SHIFT; + val |= DE_CONTROL_NORMAL << DE_CONTROL_SHIFT; + writel(val, &disp->data_enable_opt); + + val = DATA_FORMAT_DF1P1C << DATA_FORMAT_SHIFT; + val |= DATA_ALIGNMENT_MSB << DATA_ALIGNMENT_SHIFT; + val |= DATA_ORDER_RED_BLUE << DATA_ORDER_SHIFT; + writel(val, &disp->disp_interface_ctrl); + + /* + * The pixel clock divider is in 7.1 format (where the bottom bit + * represents 0.5). Here we calculate the divider needed to get from + * the display clock (typically 600MHz) to the pixel clock. We round + * up or down as requried. + */ + rate = clock_get_periph_rate(PERIPH_ID_DISP1, CLOCK_ID_CGENERAL); + div = ((rate * 2 + config->pixel_clock / 2) / config->pixel_clock) - 2; + debug("Display clock %lu, divider %lu\n", rate, div); + + writel(0x00010001, &disp->shift_clk_opt); + + val = PIXEL_CLK_DIVIDER_PCD1 << PIXEL_CLK_DIVIDER_SHIFT; + val |= div << SHIFT_CLK_DIVIDER_SHIFT; + writel(val, &disp->disp_clk_ctrl); + + return 0; +} + +/* Start up the display and turn on power to PWMs */ +static void basic_init(struct dc_cmd_reg *cmd) +{ + u32 val; + + writel(0x00000100, &cmd->gen_incr_syncpt_ctrl); + writel(0x0000011a, &cmd->cont_syncpt_vsync); + writel(0x00000000, &cmd->int_type); + writel(0x00000000, &cmd->int_polarity); + writel(0x00000000, &cmd->int_mask); + writel(0x00000000, &cmd->int_enb); + + val = PW0_ENABLE | PW1_ENABLE | PW2_ENABLE; + val |= PW3_ENABLE | PW4_ENABLE | PM0_ENABLE; + val |= PM1_ENABLE; + writel(val, &cmd->disp_pow_ctrl); + + val = readl(&cmd->disp_cmd); + val |= CTRL_MODE_C_DISPLAY << CTRL_MODE_SHIFT; + writel(val, &cmd->disp_cmd); +} + +static void basic_init_timer(struct dc_disp_reg *disp) +{ + writel(0x00000020, &disp->mem_high_pri); + writel(0x00000001, &disp->mem_high_pri_timer); +} + +static const u32 rgb_enb_tab[PIN_REG_COUNT] = { + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, +}; + +static const u32 rgb_polarity_tab[PIN_REG_COUNT] = { + 0x00000000, + 0x01000000, + 0x00000000, + 0x00000000, +}; + +static const u32 rgb_data_tab[PIN_REG_COUNT] = { + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, +}; + +static const u32 rgb_sel_tab[PIN_OUTPUT_SEL_COUNT] = { + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00210222, + 0x00002200, + 0x00020000, +}; + +static void rgb_enable(struct dc_com_reg *com) +{ + int i; + + for (i = 0; i < PIN_REG_COUNT; i++) { + writel(rgb_enb_tab[i], &com->pin_output_enb[i]); + writel(rgb_polarity_tab[i], &com->pin_output_polarity[i]); + writel(rgb_data_tab[i], &com->pin_output_data[i]); + } + + for (i = 0; i < PIN_OUTPUT_SEL_COUNT; i++) + writel(rgb_sel_tab[i], &com->pin_output_sel[i]); +} + +int setup_window(struct disp_ctl_win *win, struct fdt_disp_config *config) +{ + win->x = 0; + win->y = 0; + win->w = config->width; + win->h = config->height; + win->out_x = 0; + win->out_y = 0; + win->out_w = config->width; + win->out_h = config->height; + win->phys_addr = config->frame_buffer; + win->stride = config->width * (1 << config->log2_bpp) / 8; + debug("%s: depth = %d\n", __func__, config->log2_bpp); + switch (config->log2_bpp) { + case 5: + case 24: + win->fmt = COLOR_DEPTH_R8G8B8A8; + win->bpp = 32; + break; + case 4: + win->fmt = COLOR_DEPTH_B5G6R5; + win->bpp = 16; + break; + + default: + debug("Unsupported LCD bit depth"); + return -1; + } + + return 0; +} + +struct fdt_disp_config *tegra_display_get_config(void) +{ + return config.valid ? &config : NULL; +} + +static void debug_timing(const char *name, unsigned int timing[]) +{ +#ifdef DEBUG + int i; + + debug("%s timing: ", name); + for (i = 0; i < FDT_LCD_TIMING_COUNT; i++) + debug("%d ", timing[i]); + debug("\n"); +#endif +} + +/** + * Decode panel information from the fdt, according to a standard binding + * + * @param blob fdt blob + * @param node offset of fdt node to read from + * @param config structure to store fdt config into + * @return 0 if ok, -ve on error + */ +static int tegra_decode_panel(const void *blob, int node, + struct fdt_disp_config *config) +{ + int front, back, ref; + + config->width = fdtdec_get_int(blob, node, "xres", -1); + config->height = fdtdec_get_int(blob, node, "yres", -1); + config->pixel_clock = fdtdec_get_int(blob, node, "clock", 0); + if (!config->pixel_clock || config->width == -1 || + config->height == -1) { + debug("%s: Pixel parameters missing\n", __func__); + return -FDT_ERR_NOTFOUND; + } + + back = fdtdec_get_int(blob, node, "left-margin", -1); + front = fdtdec_get_int(blob, node, "right-margin", -1); + ref = fdtdec_get_int(blob, node, "hsync-len", -1); + if ((back | front | ref) == -1) { + debug("%s: Horizontal parameters missing\n", __func__); + return -FDT_ERR_NOTFOUND; + } + + /* Use a ref-to-sync of 1 always, and take this from the front porch */ + config->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1; + config->horiz_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref; + config->horiz_timing[FDT_LCD_TIMING_BACK_PORCH] = back; + config->horiz_timing[FDT_LCD_TIMING_FRONT_PORCH] = front - + config->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC]; + debug_timing("horiz", config->horiz_timing); + + back = fdtdec_get_int(blob, node, "upper-margin", -1); + front = fdtdec_get_int(blob, node, "lower-margin", -1); + ref = fdtdec_get_int(blob, node, "vsync-len", -1); + if ((back | front | ref) == -1) { + debug("%s: Vertical parameters missing\n", __func__); + return -FDT_ERR_NOTFOUND; + } + + config->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1; + config->vert_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref; + config->vert_timing[FDT_LCD_TIMING_BACK_PORCH] = back; + config->vert_timing[FDT_LCD_TIMING_FRONT_PORCH] = front - + config->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC]; + debug_timing("vert", config->vert_timing); + + return 0; +} + +/** + * Decode the display controller information from the fdt. + * + * @param blob fdt blob + * @param config structure to store fdt config into + * @return 0 if ok, -ve on error + */ +static int tegra_display_decode_config(const void *blob, + struct fdt_disp_config *config) +{ + int node, rgb; + int bpp, bit; + + /* TODO: Support multiple controllers */ + node = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA20_DC); + if (node < 0) { + debug("%s: Cannot find display controller node in fdt\n", + __func__); + return node; + } + config->disp = (struct disp_ctlr *)fdtdec_get_addr(blob, node, "reg"); + if (!config->disp) { + debug("%s: No display controller address\n", __func__); + return -1; + } + + rgb = fdt_subnode_offset(blob, node, "rgb"); + + config->panel_node = fdtdec_lookup_phandle(blob, rgb, "nvidia,panel"); + if (!config->panel_node < 0) { + debug("%s: Cannot find panel information\n", __func__); + return -1; + } + + if (tegra_decode_panel(blob, config->panel_node, config)) { + debug("%s: Failed to decode panel information\n", __func__); + return -1; + } + + bpp = fdtdec_get_int(blob, config->panel_node, "nvidia,bits-per-pixel", + -1); + bit = ffs(bpp) - 1; + if (bpp == (1 << bit)) + config->log2_bpp = bit; + else + config->log2_bpp = bpp; + if (bpp == -1) { + debug("%s: Pixel bpp parameters missing\n", __func__); + return -FDT_ERR_NOTFOUND; + } + config->bpp = bpp; + + config->valid = 1; /* we have a valid configuration */ + + return 0; +} + +int tegra_display_probe(const void *blob, void *default_lcd_base) +{ + struct disp_ctl_win window; + struct dc_ctlr *dc; + + if (tegra_display_decode_config(blob, &config)) + return -1; + + config.frame_buffer = (u32)default_lcd_base; + + dc = (struct dc_ctlr *)config.disp; + + /* + * A header file for clock constants was NAKed upstream. + * TODO: Put this into the FDT and fdt_lcd struct when we have clock + * support there + */ + clock_start_periph_pll(PERIPH_ID_HOST1X, CLOCK_ID_PERIPH, + 144 * 1000000); + clock_start_periph_pll(PERIPH_ID_DISP1, CLOCK_ID_CGENERAL, + 600 * 1000000); + basic_init(&dc->cmd); + basic_init_timer(&dc->disp); + rgb_enable(&dc->com); + + if (config.pixel_clock) + update_display_mode(&dc->disp, &config); + + if (setup_window(&window, &config)) + return -1; + + update_window(dc, &window); + + return 0; +} diff --git a/arch/arm/cpu/armv7/tegra20/pwm.c b/arch/arm/cpu/armv7/tegra20/pwm.c new file mode 100644 index 0000000..b655c5c --- /dev/null +++ b/arch/arm/cpu/armv7/tegra20/pwm.c @@ -0,0 +1,101 @@ +/* + * Tegra2 pulse width frequency modulator definitions + * + * Copyright (c) 2011 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <fdtdec.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/pwm.h> + +struct pwm_info { + struct pwm_ctlr *pwm; /* Registers for our pwm controller */ + int pwm_node; /* PWM device tree node */ +} local; + +void pwm_enable(unsigned channel, int rate, int pulse_width, int freq_divider) +{ + u32 reg; + + assert(channel < PWM_NUM_CHANNELS); + + /* TODO: Can we use clock_adjust_periph_pll_div() here? */ + clock_start_periph_pll(PERIPH_ID_PWM, CLOCK_ID_SFROM32KHZ, rate); + + reg = PWM_ENABLE_MASK; + reg |= pulse_width << PWM_WIDTH_SHIFT; + reg |= freq_divider << PWM_DIVIDER_SHIFT; + writel(reg, &local.pwm[channel].control); + debug("%s: channel=%d, rate=%d\n", __func__, channel, rate); +} + +int pwm_request(const void *blob, int node, const char *prop_name) +{ + int pwm_node; + u32 data[3]; + + if (fdtdec_get_int_array(blob, node, prop_name, data, + ARRAY_SIZE(data))) { + debug("%s: Cannot decode PWM property '%s'\n", __func__, + prop_name); + return -1; + } + + pwm_node = fdt_node_offset_by_phandle(blob, data[0]); + if (pwm_node != local.pwm_node) { + debug("%s: PWM property '%s' phandle %d not recognised" + "- expecting %d\n", __func__, prop_name, data[0], + local.pwm_node); + return -1; + } + if (data[1] >= PWM_NUM_CHANNELS) { + debug("%s: PWM property '%s': invalid channel %u\n", __func__, + prop_name, data[1]); + return -1; + } + + /* + * TODO: We could maintain a list of requests, but it might not be + * worth it for U-Boot. + */ + return data[1]; +} + +int pwm_init(const void *blob) +{ + local.pwm_node = fdtdec_next_compatible(blob, 0, + COMPAT_NVIDIA_TEGRA20_PWM); + if (local.pwm_node < 0) { + debug("%s: Cannot find device tree node\n", __func__); + return -1; + } + + local.pwm = (struct pwm_ctlr *)fdtdec_get_addr(blob, local.pwm_node, + "reg"); + if (local.pwm == (struct pwm_ctlr *)FDT_ADDR_T_NONE) { + debug("%s: Cannot find pwm reg address\n", __func__); + return -1; + } + debug("Tegra PWM at %p, node %d\n", local.pwm, local.pwm_node); + + return 0; +} diff --git a/arch/arm/cpu/armv7/tegra30/Makefile b/arch/arm/cpu/armv7/tegra30/Makefile new file mode 100644 index 0000000..04adb52 --- /dev/null +++ b/arch/arm/cpu/armv7/tegra30/Makefile @@ -0,0 +1,40 @@ +# +# Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved. +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms and conditions of the GNU General Public License, +# version 2, as published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS := $(COBJS-y) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/tegra30/config.mk b/arch/arm/cpu/armv7/tegra30/config.mk new file mode 100644 index 0000000..719ca81 --- /dev/null +++ b/arch/arm/cpu/armv7/tegra30/config.mk @@ -0,0 +1,19 @@ +# +# Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved. +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> +# +# This program is free software; you can redistribute it and/or modify it +# under the terms and conditions of the GNU General Public License, +# version 2, as published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# +CONFIG_ARCH_DEVICE_TREE := tegra30 diff --git a/arch/arm/cpu/armv7/u8500/Makefile b/arch/arm/cpu/armv7/u8500/Makefile new file mode 100644 index 0000000..ce8af96 --- /dev/null +++ b/arch/arm/cpu/armv7/u8500/Makefile @@ -0,0 +1,46 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS = timer.o clock.o prcmu.o cpu.o +SOBJS = lowlevel.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/u8500/clock.c b/arch/arm/cpu/armv7/u8500/clock.c new file mode 100644 index 0000000..fcfd61a --- /dev/null +++ b/arch/arm/cpu/armv7/u8500/clock.c @@ -0,0 +1,90 @@ +/* + * (C) Copyright 2009 ST-Ericsson + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> + +DECLARE_GLOBAL_DATA_PTR; + +struct clkrst { + unsigned int pcken; + unsigned int pckdis; + unsigned int kcken; + unsigned int kckdis; +}; + +static unsigned int clkrst_base[] = { + U8500_CLKRST1_BASE, + U8500_CLKRST2_BASE, + U8500_CLKRST3_BASE, + 0, + U8500_CLKRST5_BASE, + U8500_CLKRST6_BASE, + U8500_CLKRST7_BASE, /* ED only */ +}; + +/* Turn on peripheral clock at PRCC level */ +void u8500_clock_enable(int periph, int cluster, int kern) +{ + struct clkrst *clkrst = (struct clkrst *) clkrst_base[periph - 1]; + + if (kern != -1) + writel(1 << kern, &clkrst->kcken); + + if (cluster != -1) + writel(1 << cluster, &clkrst->pcken); +} + +void db8500_clocks_init(void) +{ + /* + * Enable all clocks. This is u-boot, we can enable it all. There is no + * powersave in u-boot. + */ + + u8500_clock_enable(1, 9, -1); /* GPIO0 */ + u8500_clock_enable(2, 11, -1);/* GPIO1 */ + u8500_clock_enable(3, 8, -1); /* GPIO2 */ + u8500_clock_enable(5, 1, -1); /* GPIO3 */ + u8500_clock_enable(3, 6, 6); /* UART2 */ + u8500_clock_enable(3, 3, 3); /* I2C0 */ + u8500_clock_enable(1, 5, 5); /* SDI0 */ + u8500_clock_enable(2, 4, 2); /* SDI4 */ + u8500_clock_enable(6, 6, -1); /* MTU0 */ + u8500_clock_enable(3, 4, 4); /* SDI2 */ + + /* + * Enabling clocks for all devices which are AMBA devices in the + * kernel. Otherwise they will not get probe()'d because the + * peripheral ID register will not be powered. + */ + + /* XXX: some of these differ between ED/V1 */ + + u8500_clock_enable(1, 1, 1); /* UART1 */ + u8500_clock_enable(1, 0, 0); /* UART0 */ + u8500_clock_enable(3, 2, 2); /* SSP1 */ + u8500_clock_enable(3, 1, 1); /* SSP0 */ + u8500_clock_enable(2, 8, -1); /* SPI0 */ + u8500_clock_enable(2, 5, 3); /* MSP2 */ +} diff --git a/arch/arm/cpu/armv7/u8500/cpu.c b/arch/arm/cpu/armv7/u8500/cpu.c new file mode 100644 index 0000000..6f95c30 --- /dev/null +++ b/arch/arm/cpu/armv7/u8500/cpu.c @@ -0,0 +1,192 @@ +/* + * Copyright (C) 2012 Linaro Limited + * Mathieu Poirier <mathieu.poirier@linaro.org> + * + * Based on original code from Joakim Axelsson at ST-Ericsson + * (C) Copyright 2010 ST-Ericsson + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/prcmu.h> +#include <asm/arch/clock.h> +#include <asm/arch/hardware.h> + +#include <asm/arch/hardware.h> + +#define CPUID_DB8500V1 0x411fc091 +#define CPUID_DB8500V2 0x412fc091 +#define ASICID_DB8500V11 0x008500A1 + +#define CACHE_CONTR_BASE 0xA0412000 +/* Cache controller register offsets + * as found in ARM's technical reference manual + */ +#define CACHE_INVAL_BY_WAY (CACHE_CONTR_BASE + 0x77C) +#define CACHE_LOCKDOWN_BY_D (CACHE_CONTR_BASE + 0X900) +#define CACHE_LOCKDOWN_BY_I (CACHE_CONTR_BASE + 0X904) + +static unsigned int read_asicid(void); + +static inline unsigned int read_cpuid(void) +{ + unsigned int val; + + /* Main ID register (MIDR) */ + asm("mrc p15, 0, %0, c0, c0, 0" + : "=r" (val) + : + : "cc"); + + return val; +} + +static int cpu_is_u8500v11(void) +{ + return read_asicid() == ASICID_DB8500V11; +} + +static int cpu_is_u8500v2(void) +{ + return read_cpuid() == CPUID_DB8500V2; +} + +static unsigned int read_asicid(void) +{ + unsigned int *address; + + if (cpu_is_u8500v2()) + address = (void *) U8500_ASIC_ID_LOC_V2; + else + address = (void *) U8500_ASIC_ID_LOC_ED_V1; + + return readl(address); +} + +void cpu_cache_initialization(void) +{ + unsigned int value; + /* invalidate all cache entries */ + writel(0xFFFF, CACHE_INVAL_BY_WAY); + + /* ways are set to '0' when they are totally + * cleaned and invalidated + */ + do { + value = readl(CACHE_INVAL_BY_WAY); + } while (value & 0xFF); + + /* Invalidate register 9 D and I lockdown */ + writel(0xFF, CACHE_LOCKDOWN_BY_D); + writel(0xFF, CACHE_LOCKDOWN_BY_I); +} + +#ifdef CONFIG_ARCH_CPU_INIT +/* + * SOC specific cpu init + */ +int arch_cpu_init(void) +{ + db8500_prcmu_init(); + db8500_clocks_init(); + + return 0; +} +#endif /* CONFIG_ARCH_CPU_INIT */ + +#ifdef CONFIG_MMC + +int u8500_mmc_power_init(void) +{ + int ret; + int enable, voltage; + int ab8500_revision; + + if (!cpu_is_u8500v11() && !cpu_is_u8500v2()) + return 0; + + /* Get AB8500 revision */ + ret = ab8500_read(AB8500_MISC, AB8500_REV_REG); + if (ret < 0) + goto out; + + ab8500_revision = ret; + + /* + * On v1.1 HREF boards (HREF+), Vaux3 needs to be enabled for the SD + * card to work. This is done by enabling the regulators in the AB8500 + * via PRCMU I2C transactions. + * + * This code is derived from the handling of AB8500_LDO_VAUX3 in + * ab8500_ldo_enable() and ab8500_ldo_disable() in Linux. + * + * Turn off and delay is required to have it work across soft reboots. + */ + + /* Turn off (read-modify-write) */ + ret = ab8500_read(AB8500_REGU_CTRL2, + AB8500_REGU_VRF1VAUX3_REGU_REG); + if (ret < 0) + goto out; + + enable = ret; + + /* Turn off */ + ret = ab8500_write(AB8500_REGU_CTRL2, + AB8500_REGU_VRF1VAUX3_REGU_REG, + enable & ~LDO_VAUX3_ENABLE_MASK); + if (ret < 0) + goto out; + + udelay(10 * 1000); + + /* Set the voltage to 2.91 V or 2.9 V without overriding VRF1 value */ + ret = ab8500_read(AB8500_REGU_CTRL2, + AB8500_REGU_VRF1VAUX3_SEL_REG); + if (ret < 0) + goto out; + + voltage = ret; + + if (ab8500_revision < 0x20) { + voltage &= ~LDO_VAUX3_SEL_MASK; + voltage |= LDO_VAUX3_SEL_2V9; + } else { + voltage &= ~LDO_VAUX3_V2_SEL_MASK; + voltage |= LDO_VAUX3_V2_SEL_2V91; + } + + ret = ab8500_write(AB8500_REGU_CTRL2, + AB8500_REGU_VRF1VAUX3_SEL_REG, voltage); + if (ret < 0) + goto out; + + /* Turn on the supply */ + enable &= ~LDO_VAUX3_ENABLE_MASK; + enable |= LDO_VAUX3_ENABLE_VAL; + + ret = ab8500_write(AB8500_REGU_CTRL2, + AB8500_REGU_VRF1VAUX3_REGU_REG, enable); + +out: + return ret; +} +#endif /* CONFIG_MMC */ diff --git a/arch/arm/cpu/armv7/u8500/lowlevel.S b/arch/arm/cpu/armv7/u8500/lowlevel.S new file mode 100644 index 0000000..289cfb0 --- /dev/null +++ b/arch/arm/cpu/armv7/u8500/lowlevel.S @@ -0,0 +1,36 @@ +/* + * (C) Copyright 2011 ST-Ericsson + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <config.h> +#include <linux/linkage.h> + +ENTRY(lowlevel_init) + mov pc, lr +ENDPROC(lowlevel_init) + + .align 5 +ENTRY(reset_cpu) + ldr r0, =CFG_PRCMU_BASE + ldr r1, =0x1 + str r1, [r0, #0x228] +_loop_forever: + b _loop_forever +ENDPROC(reset_cpu) diff --git a/arch/arm/cpu/armv7/u8500/prcmu.c b/arch/arm/cpu/armv7/u8500/prcmu.c new file mode 100644 index 0000000..934428f --- /dev/null +++ b/arch/arm/cpu/armv7/u8500/prcmu.c @@ -0,0 +1,229 @@ +/* + * Copyright (C) 2009 ST-Ericsson SA + * + * Adapted from the Linux version: + * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + */ + +/* + * NOTE: This currently does not support the I2C workaround access method. + */ + +#include <common.h> +#include <config.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/types.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/prcmu.h> + +/* CPU mailbox registers */ +#define PRCMU_I2C_WRITE(slave) \ + (((slave) << 1) | I2CWRITE | (1 << 6)) +#define PRCMU_I2C_READ(slave) \ + (((slave) << 1) | I2CREAD | (1 << 6)) + +#define I2C_MBOX_BIT (1 << 5) + +static int prcmu_is_ready(void) +{ + int ready = readb(PRCM_XP70_CUR_PWR_STATE) == AP_EXECUTE; + if (!ready) + printf("PRCMU firmware not ready\n"); + return ready; +} + +static int wait_for_i2c_mbx_rdy(void) +{ + int timeout = 10000; + + if (readl(PRCM_ARM_IT1_VAL) & I2C_MBOX_BIT) { + printf("prcmu: warning i2c mailbox was not acked\n"); + /* clear mailbox 5 ack irq */ + writel(I2C_MBOX_BIT, PRCM_ARM_IT1_CLEAR); + } + + /* check any already on-going transaction */ + while ((readl(PRCM_MBOX_CPU_VAL) & I2C_MBOX_BIT) && timeout) + timeout--; + + if (timeout == 0) + return -1; + + return 0; +} + +static int wait_for_i2c_req_done(void) +{ + int timeout = 10000; + + /* Set an interrupt to XP70 */ + writel(I2C_MBOX_BIT, PRCM_MBOX_CPU_SET); + + /* wait for mailbox 5 (i2c) ack */ + while (!(readl(PRCM_ARM_IT1_VAL) & I2C_MBOX_BIT) && timeout) + timeout--; + + if (timeout == 0) + return -1; + + return 0; +} + +/** + * prcmu_i2c_read - PRCMU - 4500 communication using PRCMU I2C + * @reg: - db8500 register bank to be accessed + * @slave: - db8500 register to be accessed + * Returns: ACK_MB5 value containing the status + */ +int prcmu_i2c_read(u8 reg, u16 slave) +{ + uint8_t i2c_status; + uint8_t i2c_val; + int ret; + + if (!prcmu_is_ready()) + return -1; + + debug("\nprcmu_4500_i2c_read:bank=%x;reg=%x;\n", + reg, slave); + + ret = wait_for_i2c_mbx_rdy(); + if (ret) { + printf("prcmu_i2c_read: mailbox became not ready\n"); + return ret; + } + + /* prepare the data for mailbox 5 */ + writeb(PRCMU_I2C_READ(reg), PRCM_REQ_MB5_I2COPTYPE_REG); + writeb((1 << 3) | 0x0, PRCM_REQ_MB5_BIT_FIELDS); + writeb(slave, PRCM_REQ_MB5_I2CSLAVE); + writeb(0, PRCM_REQ_MB5_I2CVAL); + + ret = wait_for_i2c_req_done(); + if (ret) { + printf("prcmu_i2c_read: mailbox request timed out\n"); + return ret; + } + + /* retrieve values */ + debug("ack-mb5:transfer status = %x\n", + readb(PRCM_ACK_MB5_STATUS)); + debug("ack-mb5:reg bank = %x\n", readb(PRCM_ACK_MB5) >> 1); + debug("ack-mb5:slave_add = %x\n", + readb(PRCM_ACK_MB5_SLAVE)); + debug("ack-mb5:reg_val = %d\n", readb(PRCM_ACK_MB5_VAL)); + + i2c_status = readb(PRCM_ACK_MB5_STATUS); + i2c_val = readb(PRCM_ACK_MB5_VAL); + /* clear mailbox 5 ack irq */ + writel(I2C_MBOX_BIT, PRCM_ARM_IT1_CLEAR); + + if (i2c_status == I2C_RD_OK) + return i2c_val; + + printf("prcmu_i2c_read:read return status= %d\n", i2c_status); + return -1; +} + +/** + * prcmu_i2c_write - PRCMU-db8500 communication using PRCMU I2C + * @reg: - db8500 register bank to be accessed + * @slave: - db800 register to be written to + * @reg_data: - the data to write + * Returns: ACK_MB5 value containing the status + */ +int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data) +{ + uint8_t i2c_status; + int ret; + + if (!prcmu_is_ready()) + return -1; + + debug("\nprcmu_4500_i2c_write:bank=%x;reg=%x;\n", + reg, slave); + + ret = wait_for_i2c_mbx_rdy(); + if (ret) { + printf("prcmu_i2c_write: mailbox became not ready\n"); + return ret; + } + + /* prepare the data for mailbox 5 */ + writeb(PRCMU_I2C_WRITE(reg), PRCM_REQ_MB5_I2COPTYPE_REG); + writeb((1 << 3) | 0x0, PRCM_REQ_MB5_BIT_FIELDS); + writeb(slave, PRCM_REQ_MB5_I2CSLAVE); + writeb(reg_data, PRCM_REQ_MB5_I2CVAL); + + ret = wait_for_i2c_req_done(); + if (ret) { + printf("prcmu_i2c_write: mailbox request timed out\n"); + return ret; + } + + /* retrieve values */ + debug("ack-mb5:transfer status = %x\n", + readb(PRCM_ACK_MB5_STATUS)); + debug("ack-mb5:reg bank = %x\n", readb(PRCM_ACK_MB5) >> 1); + debug("ack-mb5:slave_add = %x\n", + readb(PRCM_ACK_MB5_SLAVE)); + debug("ack-mb5:reg_val = %d\n", readb(PRCM_ACK_MB5_VAL)); + + i2c_status = readb(PRCM_ACK_MB5_STATUS); + debug("\ni2c_status = %x\n", i2c_status); + /* clear mailbox 5 ack irq */ + writel(I2C_MBOX_BIT, PRCM_ARM_IT1_CLEAR); + + if (i2c_status == I2C_WR_OK) + return 0; + + printf("%s: i2c_status : 0x%x\n", __func__, i2c_status); + return -1; +} + +void u8500_prcmu_enable(u32 *reg) +{ + writel(readl(reg) | (1 << 8), reg); +} + +void db8500_prcmu_init(void) +{ + /* Enable timers */ + writel(1 << 17, PRCM_TCR); + + u8500_prcmu_enable((u32 *)PRCM_PER1CLK_MGT_REG); + u8500_prcmu_enable((u32 *)PRCM_PER2CLK_MGT_REG); + u8500_prcmu_enable((u32 *)PRCM_PER3CLK_MGT_REG); + /* PER4CLK does not exist */ + u8500_prcmu_enable((u32 *)PRCM_PER5CLK_MGT_REG); + u8500_prcmu_enable((u32 *)PRCM_PER6CLK_MGT_REG); + /* Only exists in ED but is always ok to write to */ + u8500_prcmu_enable((u32 *)PRCM_PER7CLK_MGT_REG); + + u8500_prcmu_enable((u32 *)PRCM_UARTCLK_MGT_REG); + u8500_prcmu_enable((u32 *)PRCM_I2CCLK_MGT_REG); + + u8500_prcmu_enable((u32 *)PRCM_SDMMCCLK_MGT_REG); + + /* Clean up the mailbox interrupts after pre-u-boot code. */ + writel(I2C_MBOX_BIT, PRCM_ARM_IT1_CLEAR); +} diff --git a/arch/arm/cpu/armv7/u8500/timer.c b/arch/arm/cpu/armv7/u8500/timer.c new file mode 100644 index 0000000..a4b88f3 --- /dev/null +++ b/arch/arm/cpu/armv7/u8500/timer.c @@ -0,0 +1,151 @@ +/* + * Copyright (C) 2010 Linaro Limited + * John Rigby <john.rigby@linaro.org> + * + * Based on original from Linux kernel source and + * internal ST-Ericsson U-Boot source. + * (C) Copyright 2009 Alessandro Rubini + * (C) Copyright 2010 ST-Ericsson + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * The MTU device has some interrupt control registers + * followed by 4 timers. + */ + +/* The timers */ +struct u8500_mtu_timer { + u32 lr; /* Load value */ + u32 cv; /* Current value */ + u32 cr; /* Control reg */ + u32 bglr; /* ??? */ +}; + +/* The MTU that contains the timers */ +struct u8500_mtu { + u32 imsc; /* Interrupt mask set/clear */ + u32 ris; /* Raw interrupt status */ + u32 mis; /* Masked interrupt status */ + u32 icr; /* Interrupt clear register */ + struct u8500_mtu_timer pt[4]; +}; + +/* bits for the control register */ +#define MTU_CR_ONESHOT 0x01 /* if 0 = wraps reloading from BGLR */ +#define MTU_CR_32BITS 0x02 + +#define MTU_CR_PRESCALE_1 0x00 +#define MTU_CR_PRESCALE_16 0x04 +#define MTU_CR_PRESCALE_256 0x08 +#define MTU_CR_PRESCALE_MASK 0x0c + +#define MTU_CR_PERIODIC 0x40 /* if 0 = free-running */ +#define MTU_CR_ENA 0x80 + +/* + * The MTU is clocked at 133 MHz by default. (V1 and later) + */ +#define TIMER_CLOCK (133 * 1000 * 1000 / 16) +#define COUNT_TO_USEC(x) ((x) * 16 / 133) +#define USEC_TO_COUNT(x) ((x) * 133 / 16) +#define TICKS_PER_HZ (TIMER_CLOCK / CONFIG_SYS_HZ) +#define TICKS_TO_HZ(x) ((x) / TICKS_PER_HZ) +#define TIMER_LOAD_VAL 0xffffffff + +/* + * MTU timer to use (from 0 to 3). + */ +#define MTU_TIMER 2 + +static struct u8500_mtu_timer *timer_base = + &((struct u8500_mtu *)U8500_MTU0_BASE_V1)->pt[MTU_TIMER]; + +/* macro to read the 32 bit timer: since it decrements, we invert read value */ +#define READ_TIMER() (~readl(&timer_base->cv)) + +/* Configure a free-running, auto-wrap counter with /16 prescaler */ +int timer_init(void) +{ + writel(MTU_CR_ENA | MTU_CR_PRESCALE_16 | MTU_CR_32BITS, + &timer_base->cr); + return 0; +} + +ulong get_timer_masked(void) +{ + /* current tick value */ + ulong now = TICKS_TO_HZ(READ_TIMER()); + + if (now >= gd->arch.lastinc) { /* normal (non rollover) */ + gd->arch.tbl += (now - gd->arch.lastinc); + } else { /* rollover */ + gd->arch.tbl += (TICKS_TO_HZ(TIMER_LOAD_VAL) - + gd->arch.lastinc) + now; + } + gd->arch.lastinc = now; + return gd->arch.tbl; +} + +/* Delay x useconds */ +void __udelay(ulong usec) +{ + long tmo = usec * (TIMER_CLOCK / 1000) / 1000; + ulong now, last = READ_TIMER(); + + while (tmo > 0) { + now = READ_TIMER(); + if (now > last) /* normal (non rollover) */ + tmo -= now - last; + else /* rollover */ + tmo -= TIMER_LOAD_VAL - last + now; + last = now; + } +} + +ulong get_timer(ulong base) +{ + return get_timer_masked() - base; +} + +/* + * Emulation of Power architecture long long timebase. + * + * TODO: Support gd->arch.tbu for real long long timebase. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +/* + * Emulation of Power architecture timebase. + * NB: Low resolution compared to Power tbclk. + */ +ulong get_tbclk(void) +{ + return CONFIG_SYS_HZ; +} diff --git a/arch/arm/cpu/armv7/vf610/Makefile b/arch/arm/cpu/armv7/vf610/Makefile new file mode 100644 index 0000000..9232cd4 --- /dev/null +++ b/arch/arm/cpu/armv7/vf610/Makefile @@ -0,0 +1,42 @@ +# +# Copyright 2013 Freescale Semiconductor, Inc. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS += generic.o +COBJS += timer.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/vf610/generic.c b/arch/arm/cpu/armv7/vf610/generic.c new file mode 100644 index 0000000..87f2a86 --- /dev/null +++ b/arch/arm/cpu/armv7/vf610/generic.c @@ -0,0 +1,324 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/clock.h> +#include <asm/arch/crm_regs.h> +#include <netdev.h> +#ifdef CONFIG_FSL_ESDHC +#include <fsl_esdhc.h> +#endif + +#ifdef CONFIG_FSL_ESDHC +DECLARE_GLOBAL_DATA_PTR; +#endif + +#ifdef CONFIG_MXC_OCOTP +void enable_ocotp_clk(unsigned char enable) +{ + struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR; + u32 reg; + + reg = readl(&ccm->ccgr6); + if (enable) + reg |= CCM_CCGR6_OCOTP_CTRL_MASK; + else + reg &= ~CCM_CCGR6_OCOTP_CTRL_MASK; + writel(reg, &ccm->ccgr6); +} +#endif + +static u32 get_mcu_main_clk(void) +{ + struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR; + u32 ccm_ccsr, ccm_cacrr, armclk_div; + u32 sysclk_sel, pll_pfd_sel = 0; + u32 freq = 0; + + ccm_ccsr = readl(&ccm->ccsr); + sysclk_sel = ccm_ccsr & CCM_CCSR_SYS_CLK_SEL_MASK; + sysclk_sel >>= CCM_CCSR_SYS_CLK_SEL_OFFSET; + + ccm_cacrr = readl(&ccm->cacrr); + armclk_div = ccm_cacrr & CCM_CACRR_ARM_CLK_DIV_MASK; + armclk_div >>= CCM_CACRR_ARM_CLK_DIV_OFFSET; + armclk_div += 1; + + switch (sysclk_sel) { + case 0: + freq = FASE_CLK_FREQ; + break; + case 1: + freq = SLOW_CLK_FREQ; + break; + case 2: + pll_pfd_sel = ccm_ccsr & CCM_CCSR_PLL2_PFD_CLK_SEL_MASK; + pll_pfd_sel >>= CCM_CCSR_PLL2_PFD_CLK_SEL_OFFSET; + if (pll_pfd_sel == 0) + freq = PLL2_MAIN_FREQ; + else if (pll_pfd_sel == 1) + freq = PLL2_PFD1_FREQ; + else if (pll_pfd_sel == 2) + freq = PLL2_PFD2_FREQ; + else if (pll_pfd_sel == 3) + freq = PLL2_PFD3_FREQ; + else if (pll_pfd_sel == 4) + freq = PLL2_PFD4_FREQ; + break; + case 3: + freq = PLL2_MAIN_FREQ; + break; + case 4: + pll_pfd_sel = ccm_ccsr & CCM_CCSR_PLL1_PFD_CLK_SEL_MASK; + pll_pfd_sel >>= CCM_CCSR_PLL1_PFD_CLK_SEL_OFFSET; + if (pll_pfd_sel == 0) + freq = PLL1_MAIN_FREQ; + else if (pll_pfd_sel == 1) + freq = PLL1_PFD1_FREQ; + else if (pll_pfd_sel == 2) + freq = PLL1_PFD2_FREQ; + else if (pll_pfd_sel == 3) + freq = PLL1_PFD3_FREQ; + else if (pll_pfd_sel == 4) + freq = PLL1_PFD4_FREQ; + break; + case 5: + freq = PLL3_MAIN_FREQ; + break; + default: + printf("unsupported system clock select\n"); + } + + return freq / armclk_div; +} + +static u32 get_bus_clk(void) +{ + struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR; + u32 ccm_cacrr, busclk_div; + + ccm_cacrr = readl(&ccm->cacrr); + + busclk_div = ccm_cacrr & CCM_CACRR_BUS_CLK_DIV_MASK; + busclk_div >>= CCM_CACRR_BUS_CLK_DIV_OFFSET; + busclk_div += 1; + + return get_mcu_main_clk() / busclk_div; +} + +static u32 get_ipg_clk(void) +{ + struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR; + u32 ccm_cacrr, ipgclk_div; + + ccm_cacrr = readl(&ccm->cacrr); + + ipgclk_div = ccm_cacrr & CCM_CACRR_IPG_CLK_DIV_MASK; + ipgclk_div >>= CCM_CACRR_IPG_CLK_DIV_OFFSET; + ipgclk_div += 1; + + return get_bus_clk() / ipgclk_div; +} + +static u32 get_uart_clk(void) +{ + return get_ipg_clk(); +} + +static u32 get_sdhc_clk(void) +{ + struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR; + u32 ccm_cscmr1, ccm_cscdr2, sdhc_clk_sel, sdhc_clk_div; + u32 freq = 0; + + ccm_cscmr1 = readl(&ccm->cscmr1); + sdhc_clk_sel = ccm_cscmr1 & CCM_CSCMR1_ESDHC1_CLK_SEL_MASK; + sdhc_clk_sel >>= CCM_CSCMR1_ESDHC1_CLK_SEL_OFFSET; + + ccm_cscdr2 = readl(&ccm->cscdr2); + sdhc_clk_div = ccm_cscdr2 & CCM_CSCDR2_ESDHC1_CLK_DIV_MASK; + sdhc_clk_div >>= CCM_CSCDR2_ESDHC1_CLK_DIV_OFFSET; + sdhc_clk_div += 1; + + switch (sdhc_clk_sel) { + case 0: + freq = PLL3_MAIN_FREQ; + break; + case 1: + freq = PLL3_PFD3_FREQ; + break; + case 2: + freq = PLL1_PFD3_FREQ; + break; + case 3: + freq = get_bus_clk(); + break; + } + + return freq / sdhc_clk_div; +} + +u32 get_fec_clk(void) +{ + struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR; + u32 ccm_cscmr2, rmii_clk_sel; + u32 freq = 0; + + ccm_cscmr2 = readl(&ccm->cscmr2); + rmii_clk_sel = ccm_cscmr2 & CCM_CSCMR2_RMII_CLK_SEL_MASK; + rmii_clk_sel >>= CCM_CSCMR2_RMII_CLK_SEL_OFFSET; + + switch (rmii_clk_sel) { + case 0: + freq = ENET_EXTERNAL_CLK; + break; + case 1: + freq = AUDIO_EXTERNAL_CLK; + break; + case 2: + freq = PLL5_MAIN_FREQ; + break; + case 3: + freq = PLL5_MAIN_FREQ / 2; + break; + } + + return freq; +} + +unsigned int mxc_get_clock(enum mxc_clock clk) +{ + switch (clk) { + case MXC_ARM_CLK: + return get_mcu_main_clk(); + case MXC_BUS_CLK: + return get_bus_clk(); + case MXC_IPG_CLK: + return get_ipg_clk(); + case MXC_UART_CLK: + return get_uart_clk(); + case MXC_ESDHC_CLK: + return get_sdhc_clk(); + case MXC_FEC_CLK: + return get_fec_clk(); + default: + break; + } + return -1; +} + +/* Dump some core clocks */ +int do_vf610_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + printf("\n"); + printf("cpu clock : %8d MHz\n", mxc_get_clock(MXC_ARM_CLK) / 1000000); + printf("bus clock : %8d MHz\n", mxc_get_clock(MXC_BUS_CLK) / 1000000); + printf("ipg clock : %8d MHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000000); + + return 0; +} + +U_BOOT_CMD( + clocks, CONFIG_SYS_MAXARGS, 1, do_vf610_showclocks, + "display clocks", + "" +); + +#ifdef CONFIG_FEC_MXC +void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) +{ + struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; + struct fuse_bank *bank = &ocotp->bank[4]; + struct fuse_bank4_regs *fuse = + (struct fuse_bank4_regs *)bank->fuse_regs; + + u32 value = readl(&fuse->mac_addr0); + mac[0] = (value >> 8); + mac[1] = value; + + value = readl(&fuse->mac_addr1); + mac[2] = value >> 24; + mac[3] = value >> 16; + mac[4] = value >> 8; + mac[5] = value; +} +#endif + +#if defined(CONFIG_DISPLAY_CPUINFO) +static char *get_reset_cause(void) +{ + u32 cause; + struct src *src_regs = (struct src *)SRC_BASE_ADDR; + + cause = readl(&src_regs->srsr); + writel(cause, &src_regs->srsr); + cause &= 0xff; + + switch (cause) { + case 0x08: + return "WDOG"; + case 0x20: + return "JTAG HIGH-Z"; + case 0x80: + return "EXTERNAL RESET"; + case 0xfd: + return "POR"; + default: + return "unknown reset"; + } +} + +int print_cpuinfo(void) +{ + printf("CPU: Freescale Vybrid VF610 at %d MHz\n", + mxc_get_clock(MXC_ARM_CLK) / 1000000); + printf("Reset cause: %s\n", get_reset_cause()); + + return 0; +} +#endif + +int cpu_eth_init(bd_t *bis) +{ + int rc = -ENODEV; + +#if defined(CONFIG_FEC_MXC) + rc = fecmxc_initialize(bis); +#endif + + return rc; +} + +#ifdef CONFIG_FSL_ESDHC +int cpu_mmc_init(bd_t *bis) +{ + return fsl_esdhc_mmc_init(bis); +} +#endif + +int get_clocks(void) +{ +#ifdef CONFIG_FSL_ESDHC + gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); +#endif + return 0; +} diff --git a/arch/arm/cpu/armv7/vf610/timer.c b/arch/arm/cpu/armv7/vf610/timer.c new file mode 100644 index 0000000..f8fbed7 --- /dev/null +++ b/arch/arm/cpu/armv7/vf610/timer.c @@ -0,0 +1,103 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <div64.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/clock.h> + +static struct pit_reg *cur_pit = (struct pit_reg *)PIT_BASE_ADDR; + +DECLARE_GLOBAL_DATA_PTR; + +#define TIMER_LOAD_VAL 0xffffffff + +static inline unsigned long long tick_to_time(unsigned long long tick) +{ + tick *= CONFIG_SYS_HZ; + do_div(tick, mxc_get_clock(MXC_IPG_CLK)); + + return tick; +} + +static inline unsigned long long us_to_tick(unsigned long long usec) +{ + usec = usec * mxc_get_clock(MXC_IPG_CLK) + 999999; + do_div(usec, 1000000); + + return usec; +} + +int timer_init(void) +{ + __raw_writel(0, &cur_pit->mcr); + + __raw_writel(TIMER_LOAD_VAL, &cur_pit->ldval1); + __raw_writel(0, &cur_pit->tctrl1); + __raw_writel(1, &cur_pit->tctrl1); + + gd->arch.tbl = 0; + gd->arch.tbu = 0; + + return 0; +} + +unsigned long long get_ticks(void) +{ + ulong now = TIMER_LOAD_VAL - __raw_readl(&cur_pit->cval1); + + /* increment tbu if tbl has rolled over */ + if (now < gd->arch.tbl) + gd->arch.tbu++; + gd->arch.tbl = now; + + return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl; +} + +ulong get_timer_masked(void) +{ + return tick_to_time(get_ticks()); +} + +ulong get_timer(ulong base) +{ + return get_timer_masked() - base; +} + +/* delay x useconds AND preserve advance timstamp value */ +void __udelay(unsigned long usec) +{ + unsigned long long start; + ulong tmo; + + start = get_ticks(); /* get current timestamp */ + tmo = us_to_tick(usec); /* convert usecs to ticks */ + while ((get_ticks() - start) < tmo) + ; /* loop till time has passed */ +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + return mxc_get_clock(MXC_IPG_CLK); +} diff --git a/arch/arm/cpu/armv7/zynq/Makefile b/arch/arm/cpu/armv7/zynq/Makefile new file mode 100644 index 0000000..388085d --- /dev/null +++ b/arch/arm/cpu/armv7/zynq/Makefile @@ -0,0 +1,52 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS-y := timer.o +COBJS-y += cpu.o +COBJS-y += slcr.o + +COBJS := $(COBJS-y) + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/zynq/cpu.c b/arch/arm/cpu/armv7/zynq/cpu.c new file mode 100644 index 0000000..e8f4c19 --- /dev/null +++ b/arch/arm/cpu/armv7/zynq/cpu.c @@ -0,0 +1,57 @@ +/* + * Copyright (C) 2012 Michal Simek <monstr@monstr.eu> + * Copyright (C) 2012 Xilinx, Inc. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/hardware.h> + +void lowlevel_init(void) +{ + zynq_slcr_unlock(); + /* remap DDR to zero, FILTERSTART */ + writel(0, &scu_base->filter_start); + + /* Device config APB, unlock the PCAP */ + writel(0x757BDF0D, &devcfg_base->unlock); + writel(0xFFFFFFFF, &devcfg_base->rom_shadow); + + /* OCM_CFG, Mask out the ROM, map ram into upper addresses */ + writel(0x1F, &slcr_base->ocm_cfg); + /* FPGA_RST_CTRL, clear resets on AXI fabric ports */ + writel(0x0, &slcr_base->fpga_rst_ctrl); + /* TZ_DDR_RAM, Set DDR trust zone non-secure */ + writel(0xFFFFFFFF, &slcr_base->trust_zone); + /* Set urgent bits with register */ + writel(0x0, &slcr_base->ddr_urgent_sel); + /* Urgent write, ports S2/S3 */ + writel(0xC, &slcr_base->ddr_urgent); + + zynq_slcr_lock(); +} + +void reset_cpu(ulong addr) +{ + zynq_slcr_cpu_reset(); + while (1) + ; +} diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c new file mode 100644 index 0000000..52048c6 --- /dev/null +++ b/arch/arm/cpu/armv7/zynq/slcr.c @@ -0,0 +1,124 @@ +/* + * Copyright (c) 2013 Xilinx Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <malloc.h> +#include <asm/arch/hardware.h> + +#define SLCR_LOCK_MAGIC 0x767B +#define SLCR_UNLOCK_MAGIC 0xDF0D + +#define SLCR_IDCODE_MASK 0x1F000 +#define SLCR_IDCODE_SHIFT 12 + +static int slcr_lock = 1; /* 1 means locked, 0 means unlocked */ + +void zynq_slcr_lock(void) +{ + if (!slcr_lock) + writel(SLCR_LOCK_MAGIC, &slcr_base->slcr_lock); +} + +void zynq_slcr_unlock(void) +{ + if (slcr_lock) + writel(SLCR_UNLOCK_MAGIC, &slcr_base->slcr_unlock); +} + +/* Reset the entire system */ +void zynq_slcr_cpu_reset(void) +{ + /* + * Unlock the SLCR then reset the system. + * Note that this seems to require raw i/o + * functions or there's a lockup? + */ + zynq_slcr_unlock(); + + /* + * Clear 0x0F000000 bits of reboot status register to workaround + * the FSBL not loading the bitstream after soft-reboot + * This is a temporary solution until we know more. + */ + clrbits_le32(&slcr_base->reboot_status, 0xF000000); + + writel(1, &slcr_base->pss_rst_ctrl); +} + +/* Setup clk for network */ +void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk) +{ + zynq_slcr_unlock(); + + if (gem_id > 1) { + printf("Non existing GEM id %d\n", gem_id); + goto out; + } + + if (gem_id) { + /* Set divisors for appropriate frequency in GEM_CLK_CTRL */ + writel(clk, &slcr_base->gem1_clk_ctrl); + /* Configure GEM_RCLK_CTRL */ + writel(rclk, &slcr_base->gem1_rclk_ctrl); + } else { + /* Set divisors for appropriate frequency in GEM_CLK_CTRL */ + writel(clk, &slcr_base->gem0_clk_ctrl); + /* Configure GEM_RCLK_CTRL */ + writel(rclk, &slcr_base->gem0_rclk_ctrl); + } + +out: + zynq_slcr_lock(); +} + +void zynq_slcr_devcfg_disable(void) +{ + zynq_slcr_unlock(); + + /* Disable AXI interface */ + writel(0xFFFFFFFF, &slcr_base->fpga_rst_ctrl); + + /* Set Level Shifters DT618760 */ + writel(0xA, &slcr_base->lvl_shftr_en); + + zynq_slcr_lock(); +} + +void zynq_slcr_devcfg_enable(void) +{ + zynq_slcr_unlock(); + + /* Set Level Shifters DT618760 */ + writel(0xF, &slcr_base->lvl_shftr_en); + + /* Disable AXI interface */ + writel(0x0, &slcr_base->fpga_rst_ctrl); + + zynq_slcr_lock(); +} + +u32 zynq_slcr_get_idcode(void) +{ + return (readl(&slcr_base->pss_idcode) & SLCR_IDCODE_MASK) >> + SLCR_IDCODE_SHIFT; +} diff --git a/arch/arm/cpu/armv7/zynq/timer.c b/arch/arm/cpu/armv7/zynq/timer.c new file mode 100644 index 0000000..8c4357d --- /dev/null +++ b/arch/arm/cpu/armv7/zynq/timer.c @@ -0,0 +1,179 @@ +/* + * Copyright (C) 2012 Michal Simek <monstr@monstr.eu> + * Copyright (C) 2011-2012 Xilinx, Inc. All rights reserved. + * + * (C) Copyright 2008 + * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> + * + * (C) Copyright 2004 + * Philippe Robin, ARM Ltd. <philippe.robin@arm.com> + * + * (C) Copyright 2002-2004 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * (C) Copyright 2003 + * Texas Instruments <www.ti.com> + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Alex Zuepke <azu@sysgo.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <div64.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> + +DECLARE_GLOBAL_DATA_PTR; + +struct scu_timer { + u32 load; /* Timer Load Register */ + u32 counter; /* Timer Counter Register */ + u32 control; /* Timer Control Register */ +}; + +static struct scu_timer *timer_base = + (struct scu_timer *)ZYNQ_SCUTIMER_BASEADDR; + +#define SCUTIMER_CONTROL_PRESCALER_MASK 0x0000FF00 /* Prescaler */ +#define SCUTIMER_CONTROL_PRESCALER_SHIFT 8 +#define SCUTIMER_CONTROL_AUTO_RELOAD_MASK 0x00000002 /* Auto-reload */ +#define SCUTIMER_CONTROL_ENABLE_MASK 0x00000001 /* Timer enable */ + +#define TIMER_LOAD_VAL 0xFFFFFFFF +#define TIMER_PRESCALE 255 +#define TIMER_TICK_HZ (CONFIG_CPU_FREQ_HZ / 2 / TIMER_PRESCALE) + +int timer_init(void) +{ + const u32 emask = SCUTIMER_CONTROL_AUTO_RELOAD_MASK | + (TIMER_PRESCALE << SCUTIMER_CONTROL_PRESCALER_SHIFT) | + SCUTIMER_CONTROL_ENABLE_MASK; + + /* Load the timer counter register */ + writel(0xFFFFFFFF, &timer_base->counter); + + /* + * Start the A9Timer device + * Enable Auto reload mode, Clear prescaler control bits + * Set prescaler value, Enable the decrementer + */ + clrsetbits_le32(&timer_base->control, SCUTIMER_CONTROL_PRESCALER_MASK, + emask); + + /* Reset time */ + gd->arch.lastinc = readl(&timer_base->counter) / + (TIMER_TICK_HZ / CONFIG_SYS_HZ); + gd->arch.tbl = 0; + + return 0; +} + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +ulong get_timer_masked(void) +{ + ulong now; + + now = readl(&timer_base->counter) / (TIMER_TICK_HZ / CONFIG_SYS_HZ); + + if (gd->arch.lastinc >= now) { + /* Normal mode */ + gd->arch.tbl += gd->arch.lastinc - now; + } else { + /* We have an overflow ... */ + gd->arch.tbl += gd->arch.lastinc + TIMER_LOAD_VAL - now; + } + gd->arch.lastinc = now; + + return gd->arch.tbl; +} + +void __udelay(unsigned long usec) +{ + u32 countticks; + u32 timeend; + u32 timediff; + u32 timenow; + + if (usec == 0) + return; + + countticks = (u32) (((unsigned long long) TIMER_TICK_HZ * usec) / + 1000000); + + /* decrementing timer */ + timeend = readl(&timer_base->counter) - countticks; + +#if TIMER_LOAD_VAL != 0xFFFFFFFF + /* do not manage multiple overflow */ + if (countticks >= TIMER_LOAD_VAL) + countticks = TIMER_LOAD_VAL - 1; +#endif + + do { + timenow = readl(&timer_base->counter); + + if (timenow >= timeend) { + /* normal case */ + timediff = timenow - timeend; + } else { + if ((TIMER_LOAD_VAL - timeend + timenow) <= + countticks) { + /* overflow */ + timediff = TIMER_LOAD_VAL - timeend + timenow; + } else { + /* missed the exact match */ + break; + } + } + } while (timediff > 0); +} + +/* Timer without interrupts */ +ulong get_timer(ulong base) +{ + return get_timer_masked() - base; +} + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + return CONFIG_SYS_HZ; +} |
