diff options
Diffstat (limited to 'arch/arm/cpu/armv7/omap-common/emif-common.c')
| -rw-r--r-- | arch/arm/cpu/armv7/omap-common/emif-common.c | 1339 |
1 files changed, 1339 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c new file mode 100644 index 0000000..9ede3f5 --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/emif-common.c @@ -0,0 +1,1339 @@ +/* + * EMIF programming + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Aneesh V <aneesh@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/emif.h> +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> +#include <asm/omap_common.h> +#include <asm/utils.h> +#include <linux/compiler.h> + +static int emif1_enabled = -1, emif2_enabled = -1; + +void set_lpmode_selfrefresh(u32 base) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + u32 reg; + + reg = readl(&emif->emif_pwr_mgmt_ctrl); + reg &= ~EMIF_REG_LP_MODE_MASK; + reg |= LP_MODE_SELF_REFRESH << EMIF_REG_LP_MODE_SHIFT; + reg &= ~EMIF_REG_SR_TIM_MASK; + writel(reg, &emif->emif_pwr_mgmt_ctrl); + + /* dummy read for the new SR_TIM to be loaded */ + readl(&emif->emif_pwr_mgmt_ctrl); +} + +void force_emif_self_refresh() +{ + set_lpmode_selfrefresh(EMIF1_BASE); + set_lpmode_selfrefresh(EMIF2_BASE); +} + +inline u32 emif_num(u32 base) +{ + if (base == EMIF1_BASE) + return 1; + else if (base == EMIF2_BASE) + return 2; + else + return 0; +} + +/* + * Get SDRAM type connected to EMIF. + * Assuming similar SDRAM parts are connected to both EMIF's + * which is typically the case. So it is sufficient to get + * SDRAM type from EMIF1. + */ +u32 emif_sdram_type() +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE; + + return (readl(&emif->emif_sdram_config) & + EMIF_REG_SDRAM_TYPE_MASK) >> EMIF_REG_SDRAM_TYPE_SHIFT; +} + +static inline u32 get_mr(u32 base, u32 cs, u32 mr_addr) +{ + u32 mr; + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + mr_addr |= cs << EMIF_REG_CS_SHIFT; + writel(mr_addr, &emif->emif_lpddr2_mode_reg_cfg); + if (omap_revision() == OMAP4430_ES2_0) + mr = readl(&emif->emif_lpddr2_mode_reg_data_es2); + else + mr = readl(&emif->emif_lpddr2_mode_reg_data); + debug("get_mr: EMIF%d cs %d mr %08x val 0x%x\n", emif_num(base), + cs, mr_addr, mr); + if (((mr & 0x0000ff00) >> 8) == (mr & 0xff) && + ((mr & 0x00ff0000) >> 16) == (mr & 0xff) && + ((mr & 0xff000000) >> 24) == (mr & 0xff)) + return mr & 0xff; + else + return mr; +} + +static inline void set_mr(u32 base, u32 cs, u32 mr_addr, u32 mr_val) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + mr_addr |= cs << EMIF_REG_CS_SHIFT; + writel(mr_addr, &emif->emif_lpddr2_mode_reg_cfg); + writel(mr_val, &emif->emif_lpddr2_mode_reg_data); +} + +void emif_reset_phy(u32 base) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + u32 iodft; + + iodft = readl(&emif->emif_iodft_tlgc); + iodft |= EMIF_REG_RESET_PHY_MASK; + writel(iodft, &emif->emif_iodft_tlgc); +} + +static void do_lpddr2_init(u32 base, u32 cs) +{ + u32 mr_addr; + const struct lpddr2_mr_regs *mr_regs; + + get_lpddr2_mr_regs(&mr_regs); + /* Wait till device auto initialization is complete */ + while (get_mr(base, cs, LPDDR2_MR0) & LPDDR2_MR0_DAI_MASK) + ; + set_mr(base, cs, LPDDR2_MR10, mr_regs->mr10); + /* + * tZQINIT = 1 us + * Enough loops assuming a maximum of 2GHz + */ + + sdelay(2000); + + set_mr(base, cs, LPDDR2_MR1, mr_regs->mr1); + set_mr(base, cs, LPDDR2_MR16, mr_regs->mr16); + + /* + * Enable refresh along with writing MR2 + * Encoding of RL in MR2 is (RL - 2) + */ + mr_addr = LPDDR2_MR2 | EMIF_REG_REFRESH_EN_MASK; + set_mr(base, cs, mr_addr, mr_regs->mr2); + + if (mr_regs->mr3 > 0) + set_mr(base, cs, LPDDR2_MR3, mr_regs->mr3); +} + +static void lpddr2_init(u32 base, const struct emif_regs *regs) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + /* Not NVM */ + clrbits_le32(&emif->emif_lpddr2_nvm_config, EMIF_REG_CS1NVMEN_MASK); + + /* + * Keep REG_INITREF_DIS = 1 to prevent re-initialization of SDRAM + * when EMIF_SDRAM_CONFIG register is written + */ + setbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_MASK); + + /* + * Set the SDRAM_CONFIG and PHY_CTRL for the + * un-locked frequency & default RL + */ + writel(regs->sdram_config_init, &emif->emif_sdram_config); + writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1); + + do_ext_phy_settings(base, regs); + + do_lpddr2_init(base, CS0); + if (regs->sdram_config & EMIF_REG_EBANK_MASK) + do_lpddr2_init(base, CS1); + + writel(regs->sdram_config, &emif->emif_sdram_config); + writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1); + + /* Enable refresh now */ + clrbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_MASK); + + } + +__weak void do_ext_phy_settings(u32 base, const struct emif_regs *regs) +{ +} + +void emif_update_timings(u32 base, const struct emif_regs *regs) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl_shdw); + writel(regs->sdram_tim1, &emif->emif_sdram_tim_1_shdw); + writel(regs->sdram_tim2, &emif->emif_sdram_tim_2_shdw); + writel(regs->sdram_tim3, &emif->emif_sdram_tim_3_shdw); + if (omap_revision() == OMAP4430_ES1_0) { + /* ES1 bug EMIF should be in force idle during freq_update */ + writel(0, &emif->emif_pwr_mgmt_ctrl); + } else { + writel(EMIF_PWR_MGMT_CTRL, &emif->emif_pwr_mgmt_ctrl); + writel(EMIF_PWR_MGMT_CTRL_SHDW, &emif->emif_pwr_mgmt_ctrl_shdw); + } + writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl_shdw); + writel(regs->zq_config, &emif->emif_zq_config); + writel(regs->temp_alert_config, &emif->emif_temp_alert_config); + writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw); + + if ((omap_revision() >= OMAP5430_ES1_0) || + (omap_revision() == DRA752_ES1_0)) { + writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0, + &emif->emif_l3_config); + } else if (omap_revision() >= OMAP4460_ES1_0) { + writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0, + &emif->emif_l3_config); + } else { + writel(EMIF_L3_CONFIG_VAL_SYS_10_LL_0, + &emif->emif_l3_config); + } +} + +static void ddr3_leveling(u32 base, const struct emif_regs *regs) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + /* keep sdram in self-refresh */ + writel(((LP_MODE_SELF_REFRESH << EMIF_REG_LP_MODE_SHIFT) + & EMIF_REG_LP_MODE_MASK), &emif->emif_pwr_mgmt_ctrl); + __udelay(130); + + /* + * Set invert_clkout (if activated)--DDR_PHYCTRL_1 + * Invert clock adds an additional half cycle delay on the command + * interface. The additional half cycle, is usually meant to enable + * leveling in the situation that DQS is later than CK on the board.It + * also helps provide some additional margin for leveling. + */ + writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1); + writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw); + __udelay(130); + + writel(((LP_MODE_DISABLE << EMIF_REG_LP_MODE_SHIFT) + & EMIF_REG_LP_MODE_MASK), &emif->emif_pwr_mgmt_ctrl); + + /* Launch Full leveling */ + writel(DDR3_FULL_LVL, &emif->emif_rd_wr_lvl_ctl); + + /* Wait till full leveling is complete */ + readl(&emif->emif_rd_wr_lvl_ctl); + __udelay(130); + + /* Read data eye leveling no of samples */ + config_data_eye_leveling_samples(base); + + /* Launch 8 incremental WR_LVL- to compensate for PHY limitation */ + writel(0x2 << EMIF_REG_WRLVLINC_INT_SHIFT, &emif->emif_rd_wr_lvl_ctl); + __udelay(130); + + /* Launch Incremental leveling */ + writel(DDR3_INC_LVL, &emif->emif_rd_wr_lvl_ctl); + __udelay(130); +} + +static void ddr3_sw_leveling(u32 base, const struct emif_regs *regs) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1); + writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw); + config_data_eye_leveling_samples(base); + + writel(regs->emif_rd_wr_lvl_ctl, &emif->emif_rd_wr_lvl_ctl); + writel(regs->sdram_config, &emif->emif_sdram_config); +} + +static void ddr3_init(u32 base, const struct emif_regs *regs) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + /* + * Set SDRAM_CONFIG and PHY control registers to locked frequency + * and RL =7. As the default values of the Mode Registers are not + * defined, contents of mode Registers must be fully initialized. + * H/W takes care of this initialization + */ + writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config); + writel(regs->sdram_config_init, &emif->emif_sdram_config); + + writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1); + + /* Update timing registers */ + writel(regs->sdram_tim1, &emif->emif_sdram_tim_1); + writel(regs->sdram_tim2, &emif->emif_sdram_tim_2); + writel(regs->sdram_tim3, &emif->emif_sdram_tim_3); + + writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl); + writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl); + + do_ext_phy_settings(base, regs); + + /* enable leveling */ + writel(regs->emif_rd_wr_lvl_rmp_ctl, &emif->emif_rd_wr_lvl_rmp_ctl); + + if (omap_revision() == DRA752_ES1_0) + ddr3_sw_leveling(base, regs); + else + ddr3_leveling(base, regs); +} + +#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS +#define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg)) + +/* + * Organization and refresh requirements for LPDDR2 devices of different + * types and densities. Derived from JESD209-2 section 2.4 + */ +const struct lpddr2_addressing addressing_table[] = { + /* Banks tREFIx10 rowx32,rowx16 colx32,colx16 density */ + {BANKS4, T_REFI_15_6, {ROW_12, ROW_12}, {COL_7, COL_8} },/*64M */ + {BANKS4, T_REFI_15_6, {ROW_12, ROW_12}, {COL_8, COL_9} },/*128M */ + {BANKS4, T_REFI_7_8, {ROW_13, ROW_13}, {COL_8, COL_9} },/*256M */ + {BANKS4, T_REFI_7_8, {ROW_13, ROW_13}, {COL_9, COL_10} },/*512M */ + {BANKS8, T_REFI_7_8, {ROW_13, ROW_13}, {COL_9, COL_10} },/*1GS4 */ + {BANKS8, T_REFI_3_9, {ROW_14, ROW_14}, {COL_9, COL_10} },/*2GS4 */ + {BANKS8, T_REFI_3_9, {ROW_14, ROW_14}, {COL_10, COL_11} },/*4G */ + {BANKS8, T_REFI_3_9, {ROW_15, ROW_15}, {COL_10, COL_11} },/*8G */ + {BANKS4, T_REFI_7_8, {ROW_14, ROW_14}, {COL_9, COL_10} },/*1GS2 */ + {BANKS4, T_REFI_3_9, {ROW_15, ROW_15}, {COL_9, COL_10} },/*2GS2 */ +}; + +static const u32 lpddr2_density_2_size_in_mbytes[] = { + 8, /* 64Mb */ + 16, /* 128Mb */ + 32, /* 256Mb */ + 64, /* 512Mb */ + 128, /* 1Gb */ + 256, /* 2Gb */ + 512, /* 4Gb */ + 1024, /* 8Gb */ + 2048, /* 16Gb */ + 4096 /* 32Gb */ +}; + +/* + * Calculate the period of DDR clock from frequency value and set the + * denominator and numerator in global variables for easy access later + */ +static void set_ddr_clk_period(u32 freq) +{ + /* + * period = 1/freq + * period_in_ns = 10^9/freq + */ + *T_num = 1000000000; + *T_den = freq; + cancel_out(T_num, T_den, 200); + +} + +/* + * Convert time in nano seconds to number of cycles of DDR clock + */ +static inline u32 ns_2_cycles(u32 ns) +{ + return ((ns * (*T_den)) + (*T_num) - 1) / (*T_num); +} + +/* + * ns_2_cycles with the difference that the time passed is 2 times the actual + * value(to avoid fractions). The cycles returned is for the original value of + * the timing parameter + */ +static inline u32 ns_x2_2_cycles(u32 ns) +{ + return ((ns * (*T_den)) + (*T_num) * 2 - 1) / ((*T_num) * 2); +} + +/* + * Find addressing table index based on the device's type(S2 or S4) and + * density + */ +s8 addressing_table_index(u8 type, u8 density, u8 width) +{ + u8 index; + if ((density > LPDDR2_DENSITY_8Gb) || (width == LPDDR2_IO_WIDTH_8)) + return -1; + + /* + * Look at the way ADDR_TABLE_INDEX* values have been defined + * in emif.h compared to LPDDR2_DENSITY_* values + * The table is layed out in the increasing order of density + * (ignoring type). The exceptions 1GS2 and 2GS2 have been placed + * at the end + */ + if ((type == LPDDR2_TYPE_S2) && (density == LPDDR2_DENSITY_1Gb)) + index = ADDR_TABLE_INDEX1GS2; + else if ((type == LPDDR2_TYPE_S2) && (density == LPDDR2_DENSITY_2Gb)) + index = ADDR_TABLE_INDEX2GS2; + else + index = density; + + debug("emif: addressing table index %d\n", index); + + return index; +} + +/* + * Find the the right timing table from the array of timing + * tables of the device using DDR clock frequency + */ +static const struct lpddr2_ac_timings *get_timings_table(const struct + lpddr2_ac_timings const *const *device_timings, + u32 freq) +{ + u32 i, temp, freq_nearest; + const struct lpddr2_ac_timings *timings = 0; + + emif_assert(freq <= MAX_LPDDR2_FREQ); + emif_assert(device_timings); + + /* + * Start with the maximum allowed frequency - that is always safe + */ + freq_nearest = MAX_LPDDR2_FREQ; + /* + * Find the timings table that has the max frequency value: + * i. Above or equal to the DDR frequency - safe + * ii. The lowest that satisfies condition (i) - optimal + */ + for (i = 0; (i < MAX_NUM_SPEEDBINS) && device_timings[i]; i++) { + temp = device_timings[i]->max_freq; + if ((temp >= freq) && (temp <= freq_nearest)) { + freq_nearest = temp; + timings = device_timings[i]; + } + } + debug("emif: timings table: %d\n", freq_nearest); + return timings; +} + +/* + * Finds the value of emif_sdram_config_reg + * All parameters are programmed based on the device on CS0. + * If there is a device on CS1, it will be same as that on CS0 or + * it will be NVM. We don't support NVM yet. + * If cs1_device pointer is NULL it is assumed that there is no device + * on CS1 + */ +static u32 get_sdram_config_reg(const struct lpddr2_device_details *cs0_device, + const struct lpddr2_device_details *cs1_device, + const struct lpddr2_addressing *addressing, + u8 RL) +{ + u32 config_reg = 0; + + config_reg |= (cs0_device->type + 4) << EMIF_REG_SDRAM_TYPE_SHIFT; + config_reg |= EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING << + EMIF_REG_IBANK_POS_SHIFT; + + config_reg |= cs0_device->io_width << EMIF_REG_NARROW_MODE_SHIFT; + + config_reg |= RL << EMIF_REG_CL_SHIFT; + + config_reg |= addressing->row_sz[cs0_device->io_width] << + EMIF_REG_ROWSIZE_SHIFT; + + config_reg |= addressing->num_banks << EMIF_REG_IBANK_SHIFT; + + config_reg |= (cs1_device ? EBANK_CS1_EN : EBANK_CS1_DIS) << + EMIF_REG_EBANK_SHIFT; + + config_reg |= addressing->col_sz[cs0_device->io_width] << + EMIF_REG_PAGESIZE_SHIFT; + + return config_reg; +} + +static u32 get_sdram_ref_ctrl(u32 freq, + const struct lpddr2_addressing *addressing) +{ + u32 ref_ctrl = 0, val = 0, freq_khz; + freq_khz = freq / 1000; + /* + * refresh rate to be set is 'tREFI * freq in MHz + * division by 10000 to account for khz and x10 in t_REFI_us_x10 + */ + val = addressing->t_REFI_us_x10 * freq_khz / 10000; + ref_ctrl |= val << EMIF_REG_REFRESH_RATE_SHIFT; + + return ref_ctrl; +} + +static u32 get_sdram_tim_1_reg(const struct lpddr2_ac_timings *timings, + const struct lpddr2_min_tck *min_tck, + const struct lpddr2_addressing *addressing) +{ + u32 tim1 = 0, val = 0; + val = max(min_tck->tWTR, ns_x2_2_cycles(timings->tWTRx2)) - 1; + tim1 |= val << EMIF_REG_T_WTR_SHIFT; + + if (addressing->num_banks == BANKS8) + val = (timings->tFAW * (*T_den) + 4 * (*T_num) - 1) / + (4 * (*T_num)) - 1; + else + val = max(min_tck->tRRD, ns_2_cycles(timings->tRRD)) - 1; + + tim1 |= val << EMIF_REG_T_RRD_SHIFT; + + val = ns_2_cycles(timings->tRASmin + timings->tRPab) - 1; + tim1 |= val << EMIF_REG_T_RC_SHIFT; + + val = max(min_tck->tRAS_MIN, ns_2_cycles(timings->tRASmin)) - 1; + tim1 |= val << EMIF_REG_T_RAS_SHIFT; + + val = max(min_tck->tWR, ns_2_cycles(timings->tWR)) - 1; + tim1 |= val << EMIF_REG_T_WR_SHIFT; + + val = max(min_tck->tRCD, ns_2_cycles(timings->tRCD)) - 1; + tim1 |= val << EMIF_REG_T_RCD_SHIFT; + + val = max(min_tck->tRP_AB, ns_2_cycles(timings->tRPab)) - 1; + tim1 |= val << EMIF_REG_T_RP_SHIFT; + + return tim1; +} + +static u32 get_sdram_tim_2_reg(const struct lpddr2_ac_timings *timings, + const struct lpddr2_min_tck *min_tck) +{ + u32 tim2 = 0, val = 0; + val = max(min_tck->tCKE, timings->tCKE) - 1; + tim2 |= val << EMIF_REG_T_CKE_SHIFT; + + val = max(min_tck->tRTP, ns_x2_2_cycles(timings->tRTPx2)) - 1; + tim2 |= val << EMIF_REG_T_RTP_SHIFT; + + /* + * tXSRD = tRFCab + 10 ns. XSRD and XSNR should have the + * same value + */ + val = ns_2_cycles(timings->tXSR) - 1; + tim2 |= val << EMIF_REG_T_XSRD_SHIFT; + tim2 |= val << EMIF_REG_T_XSNR_SHIFT; + + val = max(min_tck->tXP, ns_x2_2_cycles(timings->tXPx2)) - 1; + tim2 |= val << EMIF_REG_T_XP_SHIFT; + + return tim2; +} + +static u32 get_sdram_tim_3_reg(const struct lpddr2_ac_timings *timings, + const struct lpddr2_min_tck *min_tck, + const struct lpddr2_addressing *addressing) +{ + u32 tim3 = 0, val = 0; + val = min(timings->tRASmax * 10 / addressing->t_REFI_us_x10 - 1, 0xF); + tim3 |= val << EMIF_REG_T_RAS_MAX_SHIFT; + + val = ns_2_cycles(timings->tRFCab) - 1; + tim3 |= val << EMIF_REG_T_RFC_SHIFT; + + val = ns_x2_2_cycles(timings->tDQSCKMAXx2) - 1; + tim3 |= val << EMIF_REG_T_TDQSCKMAX_SHIFT; + + val = ns_2_cycles(timings->tZQCS) - 1; + tim3 |= val << EMIF_REG_ZQ_ZQCS_SHIFT; + + val = max(min_tck->tCKESR, ns_2_cycles(timings->tCKESR)) - 1; + tim3 |= val << EMIF_REG_T_CKESR_SHIFT; + + return tim3; +} + +static u32 get_zq_config_reg(const struct lpddr2_device_details *cs1_device, + const struct lpddr2_addressing *addressing, + u8 volt_ramp) +{ + u32 zq = 0, val = 0; + if (volt_ramp) + val = + EMIF_ZQCS_INTERVAL_DVFS_IN_US * 10 / + addressing->t_REFI_us_x10; + else + val = + EMIF_ZQCS_INTERVAL_NORMAL_IN_US * 10 / + addressing->t_REFI_us_x10; + zq |= val << EMIF_REG_ZQ_REFINTERVAL_SHIFT; + + zq |= (REG_ZQ_ZQCL_MULT - 1) << EMIF_REG_ZQ_ZQCL_MULT_SHIFT; + + zq |= (REG_ZQ_ZQINIT_MULT - 1) << EMIF_REG_ZQ_ZQINIT_MULT_SHIFT; + + zq |= REG_ZQ_SFEXITEN_ENABLE << EMIF_REG_ZQ_SFEXITEN_SHIFT; + + /* + * Assuming that two chipselects have a single calibration resistor + * If there are indeed two calibration resistors, then this flag should + * be enabled to take advantage of dual calibration feature. + * This data should ideally come from board files. But considering + * that none of the boards today have calibration resistors per CS, + * it would be an unnecessary overhead. + */ + zq |= REG_ZQ_DUALCALEN_DISABLE << EMIF_REG_ZQ_DUALCALEN_SHIFT; + + zq |= REG_ZQ_CS0EN_ENABLE << EMIF_REG_ZQ_CS0EN_SHIFT; + + zq |= (cs1_device ? 1 : 0) << EMIF_REG_ZQ_CS1EN_SHIFT; + + return zq; +} + +static u32 get_temp_alert_config(const struct lpddr2_device_details *cs1_device, + const struct lpddr2_addressing *addressing, + u8 is_derated) +{ + u32 alert = 0, interval; + interval = + TEMP_ALERT_POLL_INTERVAL_MS * 10000 / addressing->t_REFI_us_x10; + if (is_derated) + interval *= 4; + alert |= interval << EMIF_REG_TA_REFINTERVAL_SHIFT; + + alert |= TEMP_ALERT_CONFIG_DEVCT_1 << EMIF_REG_TA_DEVCNT_SHIFT; + + alert |= TEMP_ALERT_CONFIG_DEVWDT_32 << EMIF_REG_TA_DEVWDT_SHIFT; + + alert |= 1 << EMIF_REG_TA_SFEXITEN_SHIFT; + + alert |= 1 << EMIF_REG_TA_CS0EN_SHIFT; + + alert |= (cs1_device ? 1 : 0) << EMIF_REG_TA_CS1EN_SHIFT; + + return alert; +} + +static u32 get_read_idle_ctrl_reg(u8 volt_ramp) +{ + u32 idle = 0, val = 0; + if (volt_ramp) + val = ns_2_cycles(READ_IDLE_INTERVAL_DVFS) / 64 - 1; + else + /*Maximum value in normal conditions - suggested by hw team */ + val = 0x1FF; + idle |= val << EMIF_REG_READ_IDLE_INTERVAL_SHIFT; + + idle |= EMIF_REG_READ_IDLE_LEN_VAL << EMIF_REG_READ_IDLE_LEN_SHIFT; + + return idle; +} + +static u32 get_ddr_phy_ctrl_1(u32 freq, u8 RL) +{ + u32 phy = 0, val = 0; + + phy |= (RL + 2) << EMIF_REG_READ_LATENCY_SHIFT; + + if (freq <= 100000000) + val = EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS; + else if (freq <= 200000000) + val = EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ; + else + val = EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ; + phy |= val << EMIF_REG_DLL_SLAVE_DLY_CTRL_SHIFT; + + /* Other fields are constant magic values. Hardcode them together */ + phy |= EMIF_DDR_PHY_CTRL_1_BASE_VAL << + EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHIFT; + + return phy; +} + +static u32 get_emif_mem_size(u32 base) +{ + u32 size_mbytes = 0, temp; + struct emif_device_details dev_details; + struct lpddr2_device_details cs0_dev_details, cs1_dev_details; + u32 emif_nr = emif_num(base); + + emif_reset_phy(base); + dev_details.cs0_device_details = emif_get_device_details(emif_nr, CS0, + &cs0_dev_details); + dev_details.cs1_device_details = emif_get_device_details(emif_nr, CS1, + &cs1_dev_details); + emif_reset_phy(base); + + if (dev_details.cs0_device_details) { + temp = dev_details.cs0_device_details->density; + size_mbytes += lpddr2_density_2_size_in_mbytes[temp]; + } + + if (dev_details.cs1_device_details) { + temp = dev_details.cs1_device_details->density; + size_mbytes += lpddr2_density_2_size_in_mbytes[temp]; + } + /* convert to bytes */ + return size_mbytes << 20; +} + +/* Gets the encoding corresponding to a given DMM section size */ +u32 get_dmm_section_size_map(u32 section_size) +{ + /* + * Section size mapping: + * 0x0: 16-MiB section + * 0x1: 32-MiB section + * 0x2: 64-MiB section + * 0x3: 128-MiB section + * 0x4: 256-MiB section + * 0x5: 512-MiB section + * 0x6: 1-GiB section + * 0x7: 2-GiB section + */ + section_size >>= 24; /* divide by 16 MB */ + return log_2_n_round_down(section_size); +} + +static void emif_calculate_regs( + const struct emif_device_details *emif_dev_details, + u32 freq, struct emif_regs *regs) +{ + u32 temp, sys_freq; + const struct lpddr2_addressing *addressing; + const struct lpddr2_ac_timings *timings; + const struct lpddr2_min_tck *min_tck; + const struct lpddr2_device_details *cs0_dev_details = + emif_dev_details->cs0_device_details; + const struct lpddr2_device_details *cs1_dev_details = + emif_dev_details->cs1_device_details; + const struct lpddr2_device_timings *cs0_dev_timings = + emif_dev_details->cs0_device_timings; + + emif_assert(emif_dev_details); + emif_assert(regs); + /* + * You can not have a device on CS1 without one on CS0 + * So configuring EMIF without a device on CS0 doesn't + * make sense + */ + emif_assert(cs0_dev_details); + emif_assert(cs0_dev_details->type != LPDDR2_TYPE_NVM); + /* + * If there is a device on CS1 it should be same type as CS0 + * (or NVM. But NVM is not supported in this driver yet) + */ + emif_assert((cs1_dev_details == NULL) || + (cs1_dev_details->type == LPDDR2_TYPE_NVM) || + (cs0_dev_details->type == cs1_dev_details->type)); + emif_assert(freq <= MAX_LPDDR2_FREQ); + + set_ddr_clk_period(freq); + + /* + * The device on CS0 is used for all timing calculations + * There is only one set of registers for timings per EMIF. So, if the + * second CS(CS1) has a device, it should have the same timings as the + * device on CS0 + */ + timings = get_timings_table(cs0_dev_timings->ac_timings, freq); + emif_assert(timings); + min_tck = cs0_dev_timings->min_tck; + + temp = addressing_table_index(cs0_dev_details->type, + cs0_dev_details->density, + cs0_dev_details->io_width); + + emif_assert((temp >= 0)); + addressing = &(addressing_table[temp]); + emif_assert(addressing); + + sys_freq = get_sys_clk_freq(); + + regs->sdram_config_init = get_sdram_config_reg(cs0_dev_details, + cs1_dev_details, + addressing, RL_BOOT); + + regs->sdram_config = get_sdram_config_reg(cs0_dev_details, + cs1_dev_details, + addressing, RL_FINAL); + + regs->ref_ctrl = get_sdram_ref_ctrl(freq, addressing); + + regs->sdram_tim1 = get_sdram_tim_1_reg(timings, min_tck, addressing); + + regs->sdram_tim2 = get_sdram_tim_2_reg(timings, min_tck); + + regs->sdram_tim3 = get_sdram_tim_3_reg(timings, min_tck, addressing); + + regs->read_idle_ctrl = get_read_idle_ctrl_reg(LPDDR2_VOLTAGE_STABLE); + + regs->temp_alert_config = + get_temp_alert_config(cs1_dev_details, addressing, 0); + + regs->zq_config = get_zq_config_reg(cs1_dev_details, addressing, + LPDDR2_VOLTAGE_STABLE); + + regs->emif_ddr_phy_ctlr_1_init = + get_ddr_phy_ctrl_1(sys_freq / 2, RL_BOOT); + + regs->emif_ddr_phy_ctlr_1 = + get_ddr_phy_ctrl_1(freq, RL_FINAL); + + regs->freq = freq; + + print_timing_reg(regs->sdram_config_init); + print_timing_reg(regs->sdram_config); + print_timing_reg(regs->ref_ctrl); + print_timing_reg(regs->sdram_tim1); + print_timing_reg(regs->sdram_tim2); + print_timing_reg(regs->sdram_tim3); + print_timing_reg(regs->read_idle_ctrl); + print_timing_reg(regs->temp_alert_config); + print_timing_reg(regs->zq_config); + print_timing_reg(regs->emif_ddr_phy_ctlr_1); + print_timing_reg(regs->emif_ddr_phy_ctlr_1_init); +} +#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */ + +#ifdef CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION +const char *get_lpddr2_type(u8 type_id) +{ + switch (type_id) { + case LPDDR2_TYPE_S4: + return "LPDDR2-S4"; + case LPDDR2_TYPE_S2: + return "LPDDR2-S2"; + default: + return NULL; + } +} + +const char *get_lpddr2_io_width(u8 width_id) +{ + switch (width_id) { + case LPDDR2_IO_WIDTH_8: + return "x8"; + case LPDDR2_IO_WIDTH_16: + return "x16"; + case LPDDR2_IO_WIDTH_32: + return "x32"; + default: + return NULL; + } +} + +const char *get_lpddr2_manufacturer(u32 manufacturer) +{ + switch (manufacturer) { + case LPDDR2_MANUFACTURER_SAMSUNG: + return "Samsung"; + case LPDDR2_MANUFACTURER_QIMONDA: + return "Qimonda"; + case LPDDR2_MANUFACTURER_ELPIDA: + return "Elpida"; + case LPDDR2_MANUFACTURER_ETRON: + return "Etron"; + case LPDDR2_MANUFACTURER_NANYA: + return "Nanya"; + case LPDDR2_MANUFACTURER_HYNIX: + return "Hynix"; + case LPDDR2_MANUFACTURER_MOSEL: + return "Mosel"; + case LPDDR2_MANUFACTURER_WINBOND: + return "Winbond"; + case LPDDR2_MANUFACTURER_ESMT: + return "ESMT"; + case LPDDR2_MANUFACTURER_SPANSION: + return "Spansion"; + case LPDDR2_MANUFACTURER_SST: + return "SST"; + case LPDDR2_MANUFACTURER_ZMOS: + return "ZMOS"; + case LPDDR2_MANUFACTURER_INTEL: + return "Intel"; + case LPDDR2_MANUFACTURER_NUMONYX: + return "Numonyx"; + case LPDDR2_MANUFACTURER_MICRON: + return "Micron"; + default: + return NULL; + } +} + +static void display_sdram_details(u32 emif_nr, u32 cs, + struct lpddr2_device_details *device) +{ + const char *mfg_str; + const char *type_str; + char density_str[10]; + u32 density; + + debug("EMIF%d CS%d\t", emif_nr, cs); + + if (!device) { + debug("None\n"); + return; + } + + mfg_str = get_lpddr2_manufacturer(device->manufacturer); + type_str = get_lpddr2_type(device->type); + + density = lpddr2_density_2_size_in_mbytes[device->density]; + if ((density / 1024 * 1024) == density) { + density /= 1024; + sprintf(density_str, "%d GB", density); + } else + sprintf(density_str, "%d MB", density); + if (mfg_str && type_str) + debug("%s\t\t%s\t%s\n", mfg_str, type_str, density_str); +} + +static u8 is_lpddr2_sdram_present(u32 base, u32 cs, + struct lpddr2_device_details *lpddr2_device) +{ + u32 mr = 0, temp; + + mr = get_mr(base, cs, LPDDR2_MR0); + if (mr > 0xFF) { + /* Mode register value bigger than 8 bit */ + return 0; + } + + temp = (mr & LPDDR2_MR0_DI_MASK) >> LPDDR2_MR0_DI_SHIFT; + if (temp) { + /* Not SDRAM */ + return 0; + } + temp = (mr & LPDDR2_MR0_DNVI_MASK) >> LPDDR2_MR0_DNVI_SHIFT; + + if (temp) { + /* DNV supported - But DNV is only supported for NVM */ + return 0; + } + + mr = get_mr(base, cs, LPDDR2_MR4); + if (mr > 0xFF) { + /* Mode register value bigger than 8 bit */ + return 0; + } + + mr = get_mr(base, cs, LPDDR2_MR5); + if (mr > 0xFF) { + /* Mode register value bigger than 8 bit */ + return 0; + } + + if (!get_lpddr2_manufacturer(mr)) { + /* Manufacturer not identified */ + return 0; + } + lpddr2_device->manufacturer = mr; + + mr = get_mr(base, cs, LPDDR2_MR6); + if (mr >= 0xFF) { + /* Mode register value bigger than 8 bit */ + return 0; + } + + mr = get_mr(base, cs, LPDDR2_MR7); + if (mr >= 0xFF) { + /* Mode register value bigger than 8 bit */ + return 0; + } + + mr = get_mr(base, cs, LPDDR2_MR8); + if (mr >= 0xFF) { + /* Mode register value bigger than 8 bit */ + return 0; + } + + temp = (mr & MR8_TYPE_MASK) >> MR8_TYPE_SHIFT; + if (!get_lpddr2_type(temp)) { + /* Not SDRAM */ + return 0; + } + lpddr2_device->type = temp; + + temp = (mr & MR8_DENSITY_MASK) >> MR8_DENSITY_SHIFT; + if (temp > LPDDR2_DENSITY_32Gb) { + /* Density not supported */ + return 0; + } + lpddr2_device->density = temp; + + temp = (mr & MR8_IO_WIDTH_MASK) >> MR8_IO_WIDTH_SHIFT; + if (!get_lpddr2_io_width(temp)) { + /* IO width unsupported value */ + return 0; + } + lpddr2_device->io_width = temp; + + /* + * If all the above tests pass we should + * have a device on this chip-select + */ + return 1; +} + +struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs, + struct lpddr2_device_details *lpddr2_dev_details) +{ + u32 phy; + u32 base = (emif_nr == 1) ? EMIF1_BASE : EMIF2_BASE; + + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + if (!lpddr2_dev_details) + return NULL; + + /* Do the minimum init for mode register accesses */ + if (!(running_from_sdram() || warm_reset())) { + phy = get_ddr_phy_ctrl_1(get_sys_clk_freq() / 2, RL_BOOT); + writel(phy, &emif->emif_ddr_phy_ctrl_1); + } + + if (!(is_lpddr2_sdram_present(base, cs, lpddr2_dev_details))) + return NULL; + + display_sdram_details(emif_num(base), cs, lpddr2_dev_details); + + return lpddr2_dev_details; +} +#endif /* CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION */ + +static void do_sdram_init(u32 base) +{ + const struct emif_regs *regs; + u32 in_sdram, emif_nr; + + debug(">>do_sdram_init() %x\n", base); + + in_sdram = running_from_sdram(); + emif_nr = (base == EMIF1_BASE) ? 1 : 2; + +#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS + emif_get_reg_dump(emif_nr, ®s); + if (!regs) { + debug("EMIF: reg dump not provided\n"); + return; + } +#else + /* + * The user has not provided the register values. We need to + * calculate it based on the timings and the DDR frequency + */ + struct emif_device_details dev_details; + struct emif_regs calculated_regs; + + /* + * Get device details: + * - Discovered if CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION is set + * - Obtained from user otherwise + */ + struct lpddr2_device_details cs0_dev_details, cs1_dev_details; + emif_reset_phy(base); + dev_details.cs0_device_details = emif_get_device_details(emif_nr, CS0, + &cs0_dev_details); + dev_details.cs1_device_details = emif_get_device_details(emif_nr, CS1, + &cs1_dev_details); + emif_reset_phy(base); + + /* Return if no devices on this EMIF */ + if (!dev_details.cs0_device_details && + !dev_details.cs1_device_details) { + return; + } + + /* + * Get device timings: + * - Default timings specified by JESD209-2 if + * CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS is set + * - Obtained from user otherwise + */ + emif_get_device_timings(emif_nr, &dev_details.cs0_device_timings, + &dev_details.cs1_device_timings); + + /* Calculate the register values */ + emif_calculate_regs(&dev_details, omap_ddr_clk(), &calculated_regs); + regs = &calculated_regs; +#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */ + + /* + * Initializing the LPDDR2 device can not happen from SDRAM. + * Changing the timing registers in EMIF can happen(going from one + * OPP to another) + */ + if (!(in_sdram || warm_reset())) { + if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2) + lpddr2_init(base, regs); + else + ddr3_init(base, regs); + } + if (warm_reset() && (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3)) { + set_lpmode_selfrefresh(base); + emif_reset_phy(base); + if (omap_revision() == DRA752_ES1_0) + ddr3_sw_leveling(base, regs); + else + ddr3_leveling(base, regs); + } + + /* Write to the shadow registers */ + emif_update_timings(base, regs); + + debug("<<do_sdram_init() %x\n", base); +} + +void emif_post_init_config(u32 base) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + u32 omap_rev = omap_revision(); + + /* reset phy on ES2.0 */ + if (omap_rev == OMAP4430_ES2_0) + emif_reset_phy(base); + + /* Put EMIF back in smart idle on ES1.0 */ + if (omap_rev == OMAP4430_ES1_0) + writel(0x80000000, &emif->emif_pwr_mgmt_ctrl); +} + +void dmm_init(u32 base) +{ + const struct dmm_lisa_map_regs *lisa_map_regs; + u32 i, section, valid; + +#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS + emif_get_dmm_regs(&lisa_map_regs); +#else + u32 emif1_size, emif2_size, mapped_size, section_map = 0; + u32 section_cnt, sys_addr; + struct dmm_lisa_map_regs lis_map_regs_calculated = {0}; + + mapped_size = 0; + section_cnt = 3; + sys_addr = CONFIG_SYS_SDRAM_BASE; + emif1_size = get_emif_mem_size(EMIF1_BASE); + emif2_size = get_emif_mem_size(EMIF2_BASE); + debug("emif1_size 0x%x emif2_size 0x%x\n", emif1_size, emif2_size); + + if (!emif1_size && !emif2_size) + return; + + /* symmetric interleaved section */ + if (emif1_size && emif2_size) { + mapped_size = min(emif1_size, emif2_size); + section_map = DMM_LISA_MAP_INTERLEAVED_BASE_VAL; + section_map |= 0 << EMIF_SDRC_ADDR_SHIFT; + /* only MSB */ + section_map |= (sys_addr >> 24) << + EMIF_SYS_ADDR_SHIFT; + section_map |= get_dmm_section_size_map(mapped_size * 2) + << EMIF_SYS_SIZE_SHIFT; + lis_map_regs_calculated.dmm_lisa_map_3 = section_map; + emif1_size -= mapped_size; + emif2_size -= mapped_size; + sys_addr += (mapped_size * 2); + section_cnt--; + } + + /* + * Single EMIF section(we can have a maximum of 1 single EMIF + * section- either EMIF1 or EMIF2 or none, but not both) + */ + if (emif1_size) { + section_map = DMM_LISA_MAP_EMIF1_ONLY_BASE_VAL; + section_map |= get_dmm_section_size_map(emif1_size) + << EMIF_SYS_SIZE_SHIFT; + /* only MSB */ + section_map |= (mapped_size >> 24) << + EMIF_SDRC_ADDR_SHIFT; + /* only MSB */ + section_map |= (sys_addr >> 24) << EMIF_SYS_ADDR_SHIFT; + section_cnt--; + } + if (emif2_size) { + section_map = DMM_LISA_MAP_EMIF2_ONLY_BASE_VAL; + section_map |= get_dmm_section_size_map(emif2_size) << + EMIF_SYS_SIZE_SHIFT; + /* only MSB */ + section_map |= mapped_size >> 24 << EMIF_SDRC_ADDR_SHIFT; + /* only MSB */ + section_map |= sys_addr >> 24 << EMIF_SYS_ADDR_SHIFT; + section_cnt--; + } + + if (section_cnt == 2) { + /* Only 1 section - either symmetric or single EMIF */ + lis_map_regs_calculated.dmm_lisa_map_3 = section_map; + lis_map_regs_calculated.dmm_lisa_map_2 = 0; + lis_map_regs_calculated.dmm_lisa_map_1 = 0; + } else { + /* 2 sections - 1 symmetric, 1 single EMIF */ + lis_map_regs_calculated.dmm_lisa_map_2 = section_map; + lis_map_regs_calculated.dmm_lisa_map_1 = 0; + } + + /* TRAP for invalid TILER mappings in section 0 */ + lis_map_regs_calculated.dmm_lisa_map_0 = DMM_LISA_MAP_0_INVAL_ADDR_TRAP; + + if (omap_revision() >= OMAP4460_ES1_0) + lis_map_regs_calculated.is_ma_present = 1; + + lisa_map_regs = &lis_map_regs_calculated; +#endif + struct dmm_lisa_map_regs *hw_lisa_map_regs = + (struct dmm_lisa_map_regs *)base; + + writel(0, &hw_lisa_map_regs->dmm_lisa_map_3); + writel(0, &hw_lisa_map_regs->dmm_lisa_map_2); + writel(0, &hw_lisa_map_regs->dmm_lisa_map_1); + writel(0, &hw_lisa_map_regs->dmm_lisa_map_0); + + writel(lisa_map_regs->dmm_lisa_map_3, + &hw_lisa_map_regs->dmm_lisa_map_3); + writel(lisa_map_regs->dmm_lisa_map_2, + &hw_lisa_map_regs->dmm_lisa_map_2); + writel(lisa_map_regs->dmm_lisa_map_1, + &hw_lisa_map_regs->dmm_lisa_map_1); + writel(lisa_map_regs->dmm_lisa_map_0, + &hw_lisa_map_regs->dmm_lisa_map_0); + + if (lisa_map_regs->is_ma_present) { + hw_lisa_map_regs = + (struct dmm_lisa_map_regs *)MA_BASE; + + writel(lisa_map_regs->dmm_lisa_map_3, + &hw_lisa_map_regs->dmm_lisa_map_3); + writel(lisa_map_regs->dmm_lisa_map_2, + &hw_lisa_map_regs->dmm_lisa_map_2); + writel(lisa_map_regs->dmm_lisa_map_1, + &hw_lisa_map_regs->dmm_lisa_map_1); + writel(lisa_map_regs->dmm_lisa_map_0, + &hw_lisa_map_regs->dmm_lisa_map_0); + } + + /* + * EMIF should be configured only when + * memory is mapped on it. Using emif1_enabled + * and emif2_enabled variables for this. + */ + emif1_enabled = 0; + emif2_enabled = 0; + for (i = 0; i < 4; i++) { + section = __raw_readl(DMM_BASE + i*4); + valid = (section & EMIF_SDRC_MAP_MASK) >> + (EMIF_SDRC_MAP_SHIFT); + if (valid == 3) { + emif1_enabled = 1; + emif2_enabled = 1; + break; + } else if (valid == 1) { + emif1_enabled = 1; + } else if (valid == 2) { + emif2_enabled = 1; + } + } + +} + +/* + * SDRAM initialization: + * SDRAM initialization has two parts: + * 1. Configuring the SDRAM device + * 2. Update the AC timings related parameters in the EMIF module + * (1) should be done only once and should not be done while we are + * running from SDRAM. + * (2) can and should be done more than once if OPP changes. + * Particularly, this may be needed when we boot without SPL and + * and using Configuration Header(CH). ROM code supports only at 50% OPP + * at boot (low power boot). So u-boot has to switch to OPP100 and update + * the frequency. So, + * Doing (1) and (2) makes sense - first time initialization + * Doing (2) and not (1) makes sense - OPP change (when using CH) + * Doing (1) and not (2) doen't make sense + * See do_sdram_init() for the details + */ +void sdram_init(void) +{ + u32 in_sdram, size_prog, size_detect; + u32 sdram_type = emif_sdram_type(); + + debug(">>sdram_init()\n"); + + if (omap_hw_init_context() == OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL) + return; + + in_sdram = running_from_sdram(); + debug("in_sdram = %d\n", in_sdram); + + if (!in_sdram) { + if ((sdram_type == EMIF_SDRAM_TYPE_LPDDR2) && !warm_reset()) + bypass_dpll((*prcm)->cm_clkmode_dpll_core); + else if (sdram_type == EMIF_SDRAM_TYPE_DDR3) + writel(CM_DLL_CTRL_NO_OVERRIDE, (*prcm)->cm_dll_ctrl); + } + + if (!in_sdram) + dmm_init(DMM_BASE); + + if (emif1_enabled) + do_sdram_init(EMIF1_BASE); + + if (emif2_enabled) + do_sdram_init(EMIF2_BASE); + + if (!(in_sdram || warm_reset())) { + if (emif1_enabled) + emif_post_init_config(EMIF1_BASE); + if (emif2_enabled) + emif_post_init_config(EMIF2_BASE); + } + + /* for the shadow registers to take effect */ + if (sdram_type == EMIF_SDRAM_TYPE_LPDDR2) + freq_update_core(); + + /* Do some testing after the init */ + if (!in_sdram) { + size_prog = omap_sdram_size(); + size_prog = log_2_n_round_down(size_prog); + size_prog = (1 << size_prog); + + size_detect = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, + size_prog); + /* Compare with the size programmed */ + if (size_detect != size_prog) { + printf("SDRAM: identified size not same as expected" + " size identified: %x expected: %x\n", + size_detect, + size_prog); + } else + debug("get_ram_size() successful"); + } + + debug("<<sdram_init()\n"); +} |
