Initial import of modified Linux 2.6.28 tree

Original upstream URL:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git | branch linux-2.6.28.y

15 files changed, 2198 insertions, 0 deletions

diff --git a/Documentation/x86/00-INDEX b/Documentation/x86/00-INDEX
new file mode 100644
index 0000000..dbe3377
--- /dev/null
+++ b/Documentation/x86/00-INDEX
@@ -0,0 +1,4 @@
+00-INDEX
+	- this file
+mtrr.txt
+	- how to use x86 Memory Type Range Registers to increase performance
diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt
new file mode 100644
index 0000000..83c0033
--- /dev/null
+++ b/Documentation/x86/boot.txt
@@ -0,0 +1,900 @@
+		     THE LINUX/x86 BOOT PROTOCOL
+		     ---------------------------
+
+On the x86 platform, the Linux kernel uses a rather complicated boot
+convention.  This has evolved partially due to historical aspects, as
+well as the desire in the early days to have the kernel itself be a
+bootable image, the complicated PC memory model and due to changed
+expectations in the PC industry caused by the effective demise of
+real-mode DOS as a mainstream operating system.
+
+Currently, the following versions of the Linux/x86 boot protocol exist.
+
+Old kernels:	zImage/Image support only.  Some very early kernels
+		may not even support a command line.
+
+Protocol 2.00:	(Kernel 1.3.73) Added bzImage and initrd support, as
+		well as a formalized way to communicate between the
+		boot loader and the kernel.  setup.S made relocatable,
+		although the traditional setup area still assumed
+		writable.
+
+Protocol 2.01:	(Kernel 1.3.76) Added a heap overrun warning.
+
+Protocol 2.02:	(Kernel 2.4.0-test3-pre3) New command line protocol.
+		Lower the conventional memory ceiling.	No overwrite
+		of the traditional setup area, thus making booting
+		safe for systems which use the EBDA from SMM or 32-bit
+		BIOS entry points.  zImage deprecated but still
+		supported.
+
+Protocol 2.03:	(Kernel 2.4.18-pre1) Explicitly makes the highest possible
+		initrd address available to the bootloader.
+
+Protocol 2.04:	(Kernel 2.6.14) Extend the syssize field to four bytes.
+
+Protocol 2.05:	(Kernel 2.6.20) Make protected mode kernel relocatable.
+		Introduce relocatable_kernel and kernel_alignment fields.
+
+Protocol 2.06:	(Kernel 2.6.22) Added a field that contains the size of
+		the boot command line.
+
+Protocol 2.07:	(Kernel 2.6.24) Added paravirtualised boot protocol.
+		Introduced hardware_subarch and hardware_subarch_data
+		and KEEP_SEGMENTS flag in load_flags.
+
+Protocol 2.08:	(Kernel 2.6.26) Added crc32 checksum and ELF format
+		payload. Introduced payload_offset and payload length
+		fields to aid in locating the payload.
+
+Protocol 2.09:	(Kernel 2.6.26) Added a field of 64-bit physical
+		pointer to single linked list of struct	setup_data.
+
+**** MEMORY LAYOUT
+
+The traditional memory map for the kernel loader, used for Image or
+zImage kernels, typically looks like:
+
+	|			 |
+0A0000	+------------------------+
+	|  Reserved for BIOS	 |	Do not use.  Reserved for BIOS EBDA.
+09A000	+------------------------+
+	|  Command line		 |
+	|  Stack/heap		 |	For use by the kernel real-mode code.
+098000	+------------------------+	
+	|  Kernel setup		 |	The kernel real-mode code.
+090200	+------------------------+
+	|  Kernel boot sector	 |	The kernel legacy boot sector.
+090000	+------------------------+
+	|  Protected-mode kernel |	The bulk of the kernel image.
+010000	+------------------------+
+	|  Boot loader		 |	<- Boot sector entry point 0000:7C00
+001000	+------------------------+
+	|  Reserved for MBR/BIOS |
+000800	+------------------------+
+	|  Typically used by MBR |
+000600	+------------------------+ 
+	|  BIOS use only	 |
+000000	+------------------------+
+
+
+When using bzImage, the protected-mode kernel was relocated to
+0x100000 ("high memory"), and the kernel real-mode block (boot sector,
+setup, and stack/heap) was made relocatable to any address between
+0x10000 and end of low memory. Unfortunately, in protocols 2.00 and
+2.01 the 0x90000+ memory range is still used internally by the kernel;
+the 2.02 protocol resolves that problem.
+
+It is desirable to keep the "memory ceiling" -- the highest point in
+low memory touched by the boot loader -- as low as possible, since
+some newer BIOSes have begun to allocate some rather large amounts of
+memory, called the Extended BIOS Data Area, near the top of low
+memory.	 The boot loader should use the "INT 12h" BIOS call to verify
+how much low memory is available.
+
+Unfortunately, if INT 12h reports that the amount of memory is too
+low, there is usually nothing the boot loader can do but to report an
+error to the user.  The boot loader should therefore be designed to
+take up as little space in low memory as it reasonably can.  For
+zImage or old bzImage kernels, which need data written into the
+0x90000 segment, the boot loader should make sure not to use memory
+above the 0x9A000 point; too many BIOSes will break above that point.
+
+For a modern bzImage kernel with boot protocol version >= 2.02, a
+memory layout like the following is suggested:
+
+	~                        ~
+        |  Protected-mode kernel |
+100000  +------------------------+
+	|  I/O memory hole	 |
+0A0000	+------------------------+
+	|  Reserved for BIOS	 |	Leave as much as possible unused
+	~                        ~
+	|  Command line		 |	(Can also be below the X+10000 mark)
+X+10000	+------------------------+
+	|  Stack/heap		 |	For use by the kernel real-mode code.
+X+08000	+------------------------+	
+	|  Kernel setup		 |	The kernel real-mode code.
+	|  Kernel boot sector	 |	The kernel legacy boot sector.
+X       +------------------------+
+	|  Boot loader		 |	<- Boot sector entry point 0000:7C00
+001000	+------------------------+
+	|  Reserved for MBR/BIOS |
+000800	+------------------------+
+	|  Typically used by MBR |
+000600	+------------------------+ 
+	|  BIOS use only	 |
+000000	+------------------------+
+
+... where the address X is as low as the design of the boot loader
+permits.
+
+
+**** THE REAL-MODE KERNEL HEADER
+
+In the following text, and anywhere in the kernel boot sequence, "a
+sector" refers to 512 bytes.  It is independent of the actual sector
+size of the underlying medium.
+
+The first step in loading a Linux kernel should be to load the
+real-mode code (boot sector and setup code) and then examine the
+following header at offset 0x01f1.  The real-mode code can total up to
+32K, although the boot loader may choose to load only the first two
+sectors (1K) and then examine the bootup sector size.
+
+The header looks like:
+
+Offset	Proto	Name		Meaning
+/Size
+
+01F1/1	ALL(1	setup_sects	The size of the setup in sectors
+01F2/2	ALL	root_flags	If set, the root is mounted readonly
+01F4/4	2.04+(2	syssize		The size of the 32-bit code in 16-byte paras
+01F8/2	ALL	ram_size	DO NOT USE - for bootsect.S use only
+01FA/2	ALL	vid_mode	Video mode control
+01FC/2	ALL	root_dev	Default root device number
+01FE/2	ALL	boot_flag	0xAA55 magic number
+0200/2	2.00+	jump		Jump instruction
+0202/4	2.00+	header		Magic signature "HdrS"
+0206/2	2.00+	version		Boot protocol version supported
+0208/4	2.00+	realmode_swtch	Boot loader hook (see below)
+020C/2	2.00+	start_sys	The load-low segment (0x1000) (obsolete)
+020E/2	2.00+	kernel_version	Pointer to kernel version string
+0210/1	2.00+	type_of_loader	Boot loader identifier
+0211/1	2.00+	loadflags	Boot protocol option flags
+0212/2	2.00+	setup_move_size	Move to high memory size (used with hooks)
+0214/4	2.00+	code32_start	Boot loader hook (see below)
+0218/4	2.00+	ramdisk_image	initrd load address (set by boot loader)
+021C/4	2.00+	ramdisk_size	initrd size (set by boot loader)
+0220/4	2.00+	bootsect_kludge	DO NOT USE - for bootsect.S use only
+0224/2	2.01+	heap_end_ptr	Free memory after setup end
+0226/2	N/A	pad1		Unused
+0228/4	2.02+	cmd_line_ptr	32-bit pointer to the kernel command line
+022C/4	2.03+	initrd_addr_max	Highest legal initrd address
+0230/4	2.05+	kernel_alignment Physical addr alignment required for kernel
+0234/1	2.05+	relocatable_kernel Whether kernel is relocatable or not
+0235/3	N/A	pad2		Unused
+0238/4	2.06+	cmdline_size	Maximum size of the kernel command line
+023C/4	2.07+	hardware_subarch Hardware subarchitecture
+0240/8	2.07+	hardware_subarch_data Subarchitecture-specific data
+0248/4	2.08+	payload_offset	Offset of kernel payload
+024C/4	2.08+	payload_length	Length of kernel payload
+0250/8	2.09+	setup_data	64-bit physical pointer to linked list
+				of struct setup_data
+
+(1) For backwards compatibility, if the setup_sects field contains 0, the
+    real value is 4.
+
+(2) For boot protocol prior to 2.04, the upper two bytes of the syssize
+    field are unusable, which means the size of a bzImage kernel
+    cannot be determined.
+
+If the "HdrS" (0x53726448) magic number is not found at offset 0x202,
+the boot protocol version is "old".  Loading an old kernel, the
+following parameters should be assumed:
+
+	Image type = zImage
+	initrd not supported
+	Real-mode kernel must be located at 0x90000.
+
+Otherwise, the "version" field contains the protocol version,
+e.g. protocol version 2.01 will contain 0x0201 in this field.  When
+setting fields in the header, you must make sure only to set fields
+supported by the protocol version in use.
+
+
+**** DETAILS OF HEADER FIELDS
+
+For each field, some are information from the kernel to the bootloader
+("read"), some are expected to be filled out by the bootloader
+("write"), and some are expected to be read and modified by the
+bootloader ("modify").
+
+All general purpose boot loaders should write the fields marked
+(obligatory).  Boot loaders who want to load the kernel at a
+nonstandard address should fill in the fields marked (reloc); other
+boot loaders can ignore those fields.
+
+The byte order of all fields is littleendian (this is x86, after all.)
+
+Field name:	setup_sects
+Type:		read
+Offset/size:	0x1f1/1
+Protocol:	ALL
+
+  The size of the setup code in 512-byte sectors.  If this field is
+  0, the real value is 4.  The real-mode code consists of the boot
+  sector (always one 512-byte sector) plus the setup code.
+
+Field name:	 root_flags
+Type:		 modify (optional)
+Offset/size:	 0x1f2/2
+Protocol:	 ALL
+
+  If this field is nonzero, the root defaults to readonly.  The use of
+  this field is deprecated; use the "ro" or "rw" options on the
+  command line instead.
+
+Field name:	syssize
+Type:		read
+Offset/size:	0x1f4/4 (protocol 2.04+) 0x1f4/2 (protocol ALL)
+Protocol:	2.04+
+
+  The size of the protected-mode code in units of 16-byte paragraphs.
+  For protocol versions older than 2.04 this field is only two bytes
+  wide, and therefore cannot be trusted for the size of a kernel if
+  the LOAD_HIGH flag is set.
+
+Field name:	ram_size
+Type:		kernel internal
+Offset/size:	0x1f8/2
+Protocol:	ALL
+
+  This field is obsolete.
+
+Field name:	vid_mode
+Type:		modify (obligatory)
+Offset/size:	0x1fa/2
+
+  Please see the section on SPECIAL COMMAND LINE OPTIONS.
+
+Field name:	root_dev
+Type:		modify (optional)
+Offset/size:	0x1fc/2
+Protocol:	ALL
+
+  The default root device device number.  The use of this field is
+  deprecated, use the "root=" option on the command line instead.
+
+Field name:	boot_flag
+Type:		read
+Offset/size:	0x1fe/2
+Protocol:	ALL
+
+  Contains 0xAA55.  This is the closest thing old Linux kernels have
+  to a magic number.
+
+Field name:	jump
+Type:		read
+Offset/size:	0x200/2
+Protocol:	2.00+
+
+  Contains an x86 jump instruction, 0xEB followed by a signed offset
+  relative to byte 0x202.  This can be used to determine the size of
+  the header.
+
+Field name:	header
+Type:		read
+Offset/size:	0x202/4
+Protocol:	2.00+
+
+  Contains the magic number "HdrS" (0x53726448).
+
+Field name:	version
+Type:		read
+Offset/size:	0x206/2
+Protocol:	2.00+
+
+  Contains the boot protocol version, in (major << 8)+minor format,
+  e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version
+  10.17.
+
+Field name:	readmode_swtch
+Type:		modify (optional)
+Offset/size:	0x208/4
+Protocol:	2.00+
+
+  Boot loader hook (see ADVANCED BOOT LOADER HOOKS below.)
+
+Field name:	start_sys
+Type:		read
+Offset/size:	0x20c/2
+Protocol:	2.00+
+
+  The load low segment (0x1000).  Obsolete.
+
+Field name:	kernel_version
+Type:		read
+Offset/size:	0x20e/2
+Protocol:	2.00+
+
+  If set to a nonzero value, contains a pointer to a NUL-terminated
+  human-readable kernel version number string, less 0x200.  This can
+  be used to display the kernel version to the user.  This value
+  should be less than (0x200*setup_sects).
+
+  For example, if this value is set to 0x1c00, the kernel version
+  number string can be found at offset 0x1e00 in the kernel file.
+  This is a valid value if and only if the "setup_sects" field
+  contains the value 15 or higher, as:
+
+	0x1c00  < 15*0x200 (= 0x1e00) but
+	0x1c00 >= 14*0x200 (= 0x1c00)
+
+	0x1c00 >> 9 = 14, so the minimum value for setup_secs is 15.
+
+Field name:	type_of_loader
+Type:		write (obligatory)
+Offset/size:	0x210/1
+Protocol:	2.00+
+
+  If your boot loader has an assigned id (see table below), enter
+  0xTV here, where T is an identifier for the boot loader and V is
+  a version number.  Otherwise, enter 0xFF here.
+
+  Assigned boot loader ids:
+	0  LILO			(0x00 reserved for pre-2.00 bootloader)
+	1  Loadlin
+	2  bootsect-loader	(0x20, all other values reserved)
+	3  SYSLINUX
+	4  EtherBoot
+	5  ELILO
+	7  GRuB
+	8  U-BOOT
+	9  Xen
+	A  Gujin
+	B  Qemu
+
+  Please contact <hpa@zytor.com> if you need a bootloader ID
+  value assigned.
+
+Field name:	loadflags
+Type:		modify (obligatory)
+Offset/size:	0x211/1
+Protocol:	2.00+
+
+  This field is a bitmask.
+
+  Bit 0 (read):	LOADED_HIGH
+	- If 0, the protected-mode code is loaded at 0x10000.
+	- If 1, the protected-mode code is loaded at 0x100000.
+
+  Bit 5 (write): QUIET_FLAG
+	- If 0, print early messages.
+	- If 1, suppress early messages.
+		This requests to the kernel (decompressor and early
+		kernel) to not write early messages that require
+		accessing the display hardware directly.
+
+  Bit 6 (write): KEEP_SEGMENTS
+	Protocol: 2.07+
+	- If 0, reload the segment registers in the 32bit entry point.
+	- If 1, do not reload the segment registers in the 32bit entry point.
+		Assume that %cs %ds %ss %es are all set to flat segments with
+		a base of 0 (or the equivalent for their environment).
+
+  Bit 7 (write): CAN_USE_HEAP
+	Set this bit to 1 to indicate that the value entered in the
+	heap_end_ptr is valid.  If this field is clear, some setup code
+	functionality will be disabled.
+
+Field name:	setup_move_size
+Type:		modify (obligatory)
+Offset/size:	0x212/2
+Protocol:	2.00-2.01
+
+  When using protocol 2.00 or 2.01, if the real mode kernel is not
+  loaded at 0x90000, it gets moved there later in the loading
+  sequence.  Fill in this field if you want additional data (such as
+  the kernel command line) moved in addition to the real-mode kernel
+  itself.
+
+  The unit is bytes starting with the beginning of the boot sector.
+  
+  This field is can be ignored when the protocol is 2.02 or higher, or
+  if the real-mode code is loaded at 0x90000.
+
+Field name:	code32_start
+Type:		modify (optional, reloc)
+Offset/size:	0x214/4
+Protocol:	2.00+
+
+  The address to jump to in protected mode.  This defaults to the load
+  address of the kernel, and can be used by the boot loader to
+  determine the proper load address.
+
+  This field can be modified for two purposes:
+
+  1. as a boot loader hook (see ADVANCED BOOT LOADER HOOKS below.)
+
+  2. if a bootloader which does not install a hook loads a
+     relocatable kernel at a nonstandard address it will have to modify
+     this field to point to the load address.
+
+Field name:	ramdisk_image
+Type:		write (obligatory)
+Offset/size:	0x218/4
+Protocol:	2.00+
+
+  The 32-bit linear address of the initial ramdisk or ramfs.  Leave at
+  zero if there is no initial ramdisk/ramfs.
+
+Field name:	ramdisk_size
+Type:		write (obligatory)
+Offset/size:	0x21c/4
+Protocol:	2.00+
+
+  Size of the initial ramdisk or ramfs.  Leave at zero if there is no
+  initial ramdisk/ramfs.
+
+Field name:	bootsect_kludge
+Type:		kernel internal
+Offset/size:	0x220/4
+Protocol:	2.00+
+
+  This field is obsolete.
+
+Field name:	heap_end_ptr
+Type:		write (obligatory)
+Offset/size:	0x224/2
+Protocol:	2.01+
+
+  Set this field to the offset (from the beginning of the real-mode
+  code) of the end of the setup stack/heap, minus 0x0200.
+
+Field name:	cmd_line_ptr
+Type:		write (obligatory)
+Offset/size:	0x228/4
+Protocol:	2.02+
+
+  Set this field to the linear address of the kernel command line.
+  The kernel command line can be located anywhere between the end of
+  the setup heap and 0xA0000; it does not have to be located in the
+  same 64K segment as the real-mode code itself.
+
+  Fill in this field even if your boot loader does not support a
+  command line, in which case you can point this to an empty string
+  (or better yet, to the string "auto".)  If this field is left at
+  zero, the kernel will assume that your boot loader does not support
+  the 2.02+ protocol.
+
+Field name:	initrd_addr_max
+Type:		read
+Offset/size:	0x22c/4
+Protocol:	2.03+
+
+  The maximum address that may be occupied by the initial
+  ramdisk/ramfs contents.  For boot protocols 2.02 or earlier, this
+  field is not present, and the maximum address is 0x37FFFFFF.  (This
+  address is defined as the address of the highest safe byte, so if
+  your ramdisk is exactly 131072 bytes long and this field is
+  0x37FFFFFF, you can start your ramdisk at 0x37FE0000.)
+
+Field name:	kernel_alignment
+Type:		read (reloc)
+Offset/size:	0x230/4
+Protocol:	2.05+
+
+  Alignment unit required by the kernel (if relocatable_kernel is true.)
+
+Field name:	relocatable_kernel
+Type:		read (reloc)
+Offset/size:	0x234/1
+Protocol:	2.05+
+
+  If this field is nonzero, the protected-mode part of the kernel can
+  be loaded at any address that satisfies the kernel_alignment field.
+  After loading, the boot loader must set the code32_start field to
+  point to the loaded code, or to a boot loader hook.
+
+Field name:	cmdline_size
+Type:		read
+Offset/size:	0x238/4
+Protocol:	2.06+
+
+  The maximum size of the command line without the terminating
+  zero. This means that the command line can contain at most
+  cmdline_size characters. With protocol version 2.05 and earlier, the
+  maximum size was 255.
+
+Field name:	hardware_subarch
+Type:		write (optional, defaults to x86/PC)
+Offset/size:	0x23c/4
+Protocol:	2.07+
+
+  In a paravirtualized environment the hardware low level architectural
+  pieces such as interrupt handling, page table handling, and
+  accessing process control registers needs to be done differently.
+
+  This field allows the bootloader to inform the kernel we are in one
+  one of those environments.
+
+  0x00000000	The default x86/PC environment
+  0x00000001	lguest
+  0x00000002	Xen
+
+Field name:	hardware_subarch_data
+Type:		write (subarch-dependent)
+Offset/size:	0x240/8
+Protocol:	2.07+
+
+  A pointer to data that is specific to hardware subarch
+  This field is currently unused for the default x86/PC environment,
+  do not modify.
+
+Field name:	payload_offset
+Type:		read
+Offset/size:	0x248/4
+Protocol:	2.08+
+
+  If non-zero then this field contains the offset from the end of the
+  real-mode code to the payload.
+
+  The payload may be compressed. The format of both the compressed and
+  uncompressed data should be determined using the standard magic
+  numbers. Currently only gzip compressed ELF is used.
+  
+Field name:	payload_length
+Type:		read
+Offset/size:	0x24c/4
+Protocol:	2.08+
+
+  The length of the payload.
+
+Field name:	setup_data
+Type:		write (special)
+Offset/size:	0x250/8
+Protocol:	2.09+
+
+  The 64-bit physical pointer to NULL terminated single linked list of
+  struct setup_data. This is used to define a more extensible boot
+  parameters passing mechanism. The definition of struct setup_data is
+  as follow:
+
+  struct setup_data {
+	  u64 next;
+	  u32 type;
+	  u32 len;
+	  u8  data[0];
+  };
+
+  Where, the next is a 64-bit physical pointer to the next node of
+  linked list, the next field of the last node is 0; the type is used
+  to identify the contents of data; the len is the length of data
+  field; the data holds the real payload.
+
+  This list may be modified at a number of points during the bootup
+  process.  Therefore, when modifying this list one should always make
+  sure to consider the case where the linked list already contains
+  entries.
+
+
+**** THE IMAGE CHECKSUM
+
+From boot protocol version 2.08 onwards the CRC-32 is calculated over
+the entire file using the characteristic polynomial 0x04C11DB7 and an
+initial remainder of 0xffffffff.  The checksum is appended to the
+file; therefore the CRC of the file up to the limit specified in the
+syssize field of the header is always 0.
+
+
+**** THE KERNEL COMMAND LINE
+
+The kernel command line has become an important way for the boot
+loader to communicate with the kernel.  Some of its options are also
+relevant to the boot loader itself, see "special command line options"
+below.
+
+The kernel command line is a null-terminated string. The maximum
+length can be retrieved from the field cmdline_size.  Before protocol
+version 2.06, the maximum was 255 characters.  A string that is too
+long will be automatically truncated by the kernel.
+
+If the boot protocol version is 2.02 or later, the address of the
+kernel command line is given by the header field cmd_line_ptr (see
+above.)  This address can be anywhere between the end of the setup
+heap and 0xA0000.
+
+If the protocol version is *not* 2.02 or higher, the kernel
+command line is entered using the following protocol:
+
+	At offset 0x0020 (word), "cmd_line_magic", enter the magic
+	number 0xA33F.
+
+	At offset 0x0022 (word), "cmd_line_offset", enter the offset
+	of the kernel command line (relative to the start of the
+	real-mode kernel).
+	
+	The kernel command line *must* be within the memory region
+	covered by setup_move_size, so you may need to adjust this
+	field.
+
+
+**** MEMORY LAYOUT OF THE REAL-MODE CODE
+
+The real-mode code requires a stack/heap to be set up, as well as
+memory allocated for the kernel command line.  This needs to be done
+in the real-mode accessible memory in bottom megabyte.
+
+It should be noted that modern machines often have a sizable Extended
+BIOS Data Area (EBDA).  As a result, it is advisable to use as little
+of the low megabyte as possible.
+
+Unfortunately, under the following circumstances the 0x90000 memory
+segment has to be used:
+
+	- When loading a zImage kernel ((loadflags & 0x01) == 0).
+	- When loading a 2.01 or earlier boot protocol kernel.
+
+	  -> For the 2.00 and 2.01 boot protocols, the real-mode code
+	     can be loaded at another address, but it is internally
+	     relocated to 0x90000.  For the "old" protocol, the
+	     real-mode code must be loaded at 0x90000.
+
+When loading at 0x90000, avoid using memory above 0x9a000.
+
+For boot protocol 2.02 or higher, the command line does not have to be
+located in the same 64K segment as the real-mode setup code; it is
+thus permitted to give the stack/heap the full 64K segment and locate
+the command line above it.
+
+The kernel command line should not be located below the real-mode
+code, nor should it be located in high memory.
+
+
+**** SAMPLE BOOT CONFIGURATION
+
+As a sample configuration, assume the following layout of the real
+mode segment:
+
+    When loading below 0x90000, use the entire segment:
+
+	0x0000-0x7fff	Real mode kernel
+	0x8000-0xdfff	Stack and heap
+	0xe000-0xffff	Kernel command line
+
+    When loading at 0x90000 OR the protocol version is 2.01 or earlier:
+
+	0x0000-0x7fff	Real mode kernel
+	0x8000-0x97ff	Stack and heap
+	0x9800-0x9fff	Kernel command line
+
+Such a boot loader should enter the following fields in the header:
+
+	unsigned long base_ptr;	/* base address for real-mode segment */
+
+	if ( setup_sects == 0 ) {
+		setup_sects = 4;
+	}
+
+	if ( protocol >= 0x0200 ) {
+		type_of_loader = <type code>;
+		if ( loading_initrd ) {
+			ramdisk_image = <initrd_address>;
+			ramdisk_size = <initrd_size>;
+		}
+
+		if ( protocol >= 0x0202 && loadflags & 0x01 )
+			heap_end = 0xe000;
+		else
+			heap_end = 0x9800;
+
+		if ( protocol >= 0x0201 ) {
+			heap_end_ptr = heap_end - 0x200;
+			loadflags |= 0x80; /* CAN_USE_HEAP */
+		}
+
+		if ( protocol >= 0x0202 ) {
+			cmd_line_ptr = base_ptr + heap_end;
+			strcpy(cmd_line_ptr, cmdline);
+		} else {
+			cmd_line_magic	= 0xA33F;
+			cmd_line_offset = heap_end;
+			setup_move_size = heap_end + strlen(cmdline)+1;
+			strcpy(base_ptr+cmd_line_offset, cmdline);
+		}
+	} else {
+		/* Very old kernel */
+
+		heap_end = 0x9800;
+
+		cmd_line_magic	= 0xA33F;
+		cmd_line_offset = heap_end;
+
+		/* A very old kernel MUST have its real-mode code
+		   loaded at 0x90000 */
+
+		if ( base_ptr != 0x90000 ) {
+			/* Copy the real-mode kernel */
+			memcpy(0x90000, base_ptr, (setup_sects+1)*512);
+			base_ptr = 0x90000;		 /* Relocated */
+		}
+
+		strcpy(0x90000+cmd_line_offset, cmdline);
+
+		/* It is recommended to clear memory up to the 32K mark */
+		memset(0x90000 + (setup_sects+1)*512, 0,
+		       (64-(setup_sects+1))*512);
+	}
+
+
+**** LOADING THE REST OF THE KERNEL
+
+The 32-bit (non-real-mode) kernel starts at offset (setup_sects+1)*512
+in the kernel file (again, if setup_sects == 0 the real value is 4.)
+It should be loaded at address 0x10000 for Image/zImage kernels and
+0x100000 for bzImage kernels.
+
+The kernel is a bzImage kernel if the protocol >= 2.00 and the 0x01
+bit (LOAD_HIGH) in the loadflags field is set:
+
+	is_bzImage = (protocol >= 0x0200) && (loadflags & 0x01);
+	load_address = is_bzImage ? 0x100000 : 0x10000;
+
+Note that Image/zImage kernels can be up to 512K in size, and thus use
+the entire 0x10000-0x90000 range of memory.  This means it is pretty
+much a requirement for these kernels to load the real-mode part at
+0x90000.  bzImage kernels allow much more flexibility.
+
+
+**** SPECIAL COMMAND LINE OPTIONS
+
+If the command line provided by the boot loader is entered by the
+user, the user may expect the following command line options to work.
+They should normally not be deleted from the kernel command line even
+though not all of them are actually meaningful to the kernel.  Boot
+loader authors who need additional command line options for the boot
+loader itself should get them registered in
+Documentation/kernel-parameters.txt to make sure they will not
+conflict with actual kernel options now or in the future.
+
+  vga=<mode>
+	<mode> here is either an integer (in C notation, either
+	decimal, octal, or hexadecimal) or one of the strings
+	"normal" (meaning 0xFFFF), "ext" (meaning 0xFFFE) or "ask"
+	(meaning 0xFFFD).  This value should be entered into the
+	vid_mode field, as it is used by the kernel before the command
+	line is parsed.
+
+  mem=<size>
+	<size> is an integer in C notation optionally followed by
+	(case insensitive) K, M, G, T, P or E (meaning << 10, << 20,
+	<< 30, << 40, << 50 or << 60).  This specifies the end of
+	memory to the kernel. This affects the possible placement of
+	an initrd, since an initrd should be placed near end of
+	memory.  Note that this is an option to *both* the kernel and
+	the bootloader!
+
+  initrd=<file>
+	An initrd should be loaded.  The meaning of <file> is
+	obviously bootloader-dependent, and some boot loaders
+	(e.g. LILO) do not have such a command.
+
+In addition, some boot loaders add the following options to the
+user-specified command line:
+
+  BOOT_IMAGE=<file>
+	The boot image which was loaded.  Again, the meaning of <file>
+	is obviously bootloader-dependent.
+
+  auto
+	The kernel was booted without explicit user intervention.
+
+If these options are added by the boot loader, it is highly
+recommended that they are located *first*, before the user-specified
+or configuration-specified command line.  Otherwise, "init=/bin/sh"
+gets confused by the "auto" option.
+
+
+**** RUNNING THE KERNEL
+
+The kernel is started by jumping to the kernel entry point, which is
+located at *segment* offset 0x20 from the start of the real mode
+kernel.  This means that if you loaded your real-mode kernel code at
+0x90000, the kernel entry point is 9020:0000.
+
+At entry, ds = es = ss should point to the start of the real-mode
+kernel code (0x9000 if the code is loaded at 0x90000), sp should be
+set up properly, normally pointing to the top of the heap, and
+interrupts should be disabled.  Furthermore, to guard against bugs in
+the kernel, it is recommended that the boot loader sets fs = gs = ds =
+es = ss.
+
+In our example from above, we would do:
+
+	/* Note: in the case of the "old" kernel protocol, base_ptr must
+	   be == 0x90000 at this point; see the previous sample code */
+
+	seg = base_ptr >> 4;
+
+	cli();	/* Enter with interrupts disabled! */
+
+	/* Set up the real-mode kernel stack */
+	_SS = seg;
+	_SP = heap_end;
+
+	_DS = _ES = _FS = _GS = seg;
+	jmp_far(seg+0x20, 0);	/* Run the kernel */
+
+If your boot sector accesses a floppy drive, it is recommended to
+switch off the floppy motor before running the kernel, since the
+kernel boot leaves interrupts off and thus the motor will not be
+switched off, especially if the loaded kernel has the floppy driver as
+a demand-loaded module!
+
+
+**** ADVANCED BOOT LOADER HOOKS
+
+If the boot loader runs in a particularly hostile environment (such as
+LOADLIN, which runs under DOS) it may be impossible to follow the
+standard memory location requirements.  Such a boot loader may use the
+following hooks that, if set, are invoked by the kernel at the
+appropriate time.  The use of these hooks should probably be
+considered an absolutely last resort!
+
+IMPORTANT: All the hooks are required to preserve %esp, %ebp, %esi and
+%edi across invocation.
+
+  realmode_swtch:
+	A 16-bit real mode far subroutine invoked immediately before
+	entering protected mode.  The default routine disables NMI, so
+	your routine should probably do so, too.
+
+  code32_start:
+	A 32-bit flat-mode routine *jumped* to immediately after the
+	transition to protected mode, but before the kernel is
+	uncompressed.  No segments, except CS, are guaranteed to be
+	set up (current kernels do, but older ones do not); you should
+	set them up to BOOT_DS (0x18) yourself.
+
+	After completing your hook, you should jump to the address
+	that was in this field before your boot loader overwrote it
+	(relocated, if appropriate.)
+
+
+**** 32-bit BOOT PROTOCOL
+
+For machine with some new BIOS other than legacy BIOS, such as EFI,
+LinuxBIOS, etc, and kexec, the 16-bit real mode setup code in kernel
+based on legacy BIOS can not be used, so a 32-bit boot protocol needs
+to be defined.
+
+In 32-bit boot protocol, the first step in loading a Linux kernel
+should be to setup the boot parameters (struct boot_params,
+traditionally known as "zero page"). The memory for struct boot_params
+should be allocated and initialized to all zero. Then the setup header
+from offset 0x01f1 of kernel image on should be loaded into struct
+boot_params and examined. The end of setup header can be calculated as
+follow:
+
+	0x0202 + byte value at offset 0x0201
+
+In addition to read/modify/write the setup header of the struct
+boot_params as that of 16-bit boot protocol, the boot loader should
+also fill the additional fields of the struct boot_params as that
+described in zero-page.txt.
+
+After setupping the struct boot_params, the boot loader can load the
+32/64-bit kernel in the same way as that of 16-bit boot protocol.
+
+In 32-bit boot protocol, the kernel is started by jumping to the
+32-bit kernel entry point, which is the start address of loaded
+32/64-bit kernel.
+
+At entry, the CPU must be in 32-bit protected mode with paging
+disabled; a GDT must be loaded with the descriptors for selectors
+__BOOT_CS(0x10) and __BOOT_DS(0x18); both descriptors must be 4G flat
+segment; __BOOS_CS must have execute/read permission, and __BOOT_DS
+must have read/write permission; CS must be __BOOT_CS and DS, ES, SS
+must be __BOOT_DS; interrupt must be disabled; %esi must hold the base
+address of the struct boot_params; %ebp, %edi and %ebx must be zero.
diff --git a/Documentation/x86/i386/IO-APIC.txt b/Documentation/x86/i386/IO-APIC.txt
new file mode 100644
index 0000000..30b4c71
--- /dev/null
+++ b/Documentation/x86/i386/IO-APIC.txt
@@ -0,0 +1,119 @@
+Most (all) Intel-MP compliant SMP boards have the so-called 'IO-APIC',
+which is an enhanced interrupt controller. It enables us to route
+hardware interrupts to multiple CPUs, or to CPU groups. Without an
+IO-APIC, interrupts from hardware will be delivered only to the
+CPU which boots the operating system (usually CPU#0).
+
+Linux supports all variants of compliant SMP boards, including ones with
+multiple IO-APICs. Multiple IO-APICs are used in high-end servers to
+distribute IRQ load further.
+
+There are (a few) known breakages in certain older boards, such bugs are
+usually worked around by the kernel. If your MP-compliant SMP board does
+not boot Linux, then consult the linux-smp mailing list archives first.
+
+If your box boots fine with enabled IO-APIC IRQs, then your
+/proc/interrupts will look like this one:
+
+   ---------------------------->
+  hell:~> cat /proc/interrupts
+             CPU0
+    0:    1360293    IO-APIC-edge  timer
+    1:          4    IO-APIC-edge  keyboard
+    2:          0          XT-PIC  cascade
+   13:          1          XT-PIC  fpu
+   14:       1448    IO-APIC-edge  ide0
+   16:      28232   IO-APIC-level  Intel EtherExpress Pro 10/100 Ethernet
+   17:      51304   IO-APIC-level  eth0
+  NMI:          0
+  ERR:          0
+  hell:~>
+  <----------------------------
+
+Some interrupts are still listed as 'XT PIC', but this is not a problem;
+none of those IRQ sources is performance-critical.
+
+
+In the unlikely case that your board does not create a working mp-table,
+you can use the pirq= boot parameter to 'hand-construct' IRQ entries. This
+is non-trivial though and cannot be automated. One sample /etc/lilo.conf
+entry:
+
+	append="pirq=15,11,10"
+
+The actual numbers depend on your system, on your PCI cards and on their
+PCI slot position. Usually PCI slots are 'daisy chained' before they are
+connected to the PCI chipset IRQ routing facility (the incoming PIRQ1-4
+lines):
+
+               ,-.        ,-.        ,-.        ,-.        ,-.
+     PIRQ4 ----| |-.    ,-| |-.    ,-| |-.    ,-| |--------| |
+               |S|  \  /  |S|  \  /  |S|  \  /  |S|        |S|
+     PIRQ3 ----|l|-. `/---|l|-. `/---|l|-. `/---|l|--------|l|
+               |o|  \/    |o|  \/    |o|  \/    |o|        |o|
+     PIRQ2 ----|t|-./`----|t|-./`----|t|-./`----|t|--------|t|
+               |1| /\     |2| /\     |3| /\     |4|        |5|
+     PIRQ1 ----| |-  `----| |-  `----| |-  `----| |--------| |
+               `-'        `-'        `-'        `-'        `-'
+
+Every PCI card emits a PCI IRQ, which can be INTA, INTB, INTC or INTD:
+
+                               ,-.
+                         INTD--| |
+                               |S|
+                         INTC--|l|
+                               |o|
+                         INTB--|t|
+                               |x|
+                         INTA--| |
+                               `-'
+
+These INTA-D PCI IRQs are always 'local to the card', their real meaning
+depends on which slot they are in. If you look at the daisy chaining diagram,
+a card in slot4, issuing INTA IRQ, it will end up as a signal on PIRQ4 of
+the PCI chipset. Most cards issue INTA, this creates optimal distribution
+between the PIRQ lines. (distributing IRQ sources properly is not a
+necessity, PCI IRQs can be shared at will, but it's a good for performance
+to have non shared interrupts). Slot5 should be used for videocards, they
+do not use interrupts normally, thus they are not daisy chained either.
+
+so if you have your SCSI card (IRQ11) in Slot1, Tulip card (IRQ9) in
+Slot2, then you'll have to specify this pirq= line:
+
+	append="pirq=11,9"
+
+the following script tries to figure out such a default pirq= line from
+your PCI configuration:
+
+	echo -n pirq=; echo `scanpci | grep T_L | cut -c56-` | sed 's/ /,/g'
+
+note that this script wont work if you have skipped a few slots or if your
+board does not do default daisy-chaining. (or the IO-APIC has the PIRQ pins
+connected in some strange way). E.g. if in the above case you have your SCSI
+card (IRQ11) in Slot3, and have Slot1 empty:
+
+	append="pirq=0,9,11"
+
+[value '0' is a generic 'placeholder', reserved for empty (or non-IRQ emitting)
+slots.]
+
+Generally, it's always possible to find out the correct pirq= settings, just
+permute all IRQ numbers properly ... it will take some time though. An
+'incorrect' pirq line will cause the booting process to hang, or a device
+won't function properly (e.g. if it's inserted as a module).
+
+If you have 2 PCI buses, then you can use up to 8 pirq values, although such
+boards tend to have a good configuration.
+
+Be prepared that it might happen that you need some strange pirq line:
+
+	append="pirq=0,0,0,0,0,0,9,11"
+
+Use smart trial-and-error techniques to find out the correct pirq line ...
+
+Good luck and mail to linux-smp@vger.kernel.org or
+linux-kernel@vger.kernel.org if you have any problems that are not covered
+by this document.
+
+-- mingo
+
diff --git a/Documentation/x86/mtrr.txt b/Documentation/x86/mtrr.txt
new file mode 100644
index 0000000..cc071dc
--- /dev/null
+++ b/Documentation/x86/mtrr.txt
@@ -0,0 +1,305 @@
+MTRR (Memory Type Range Register) control
+3 Jun 1999
+Richard Gooch
+<rgooch@atnf.csiro.au>
+
+  On Intel P6 family processors (Pentium Pro, Pentium II and later)
+  the Memory Type Range Registers (MTRRs) may be used to control
+  processor access to memory ranges. This is most useful when you have
+  a video (VGA) card on a PCI or AGP bus. Enabling write-combining
+  allows bus write transfers to be combined into a larger transfer
+  before bursting over the PCI/AGP bus. This can increase performance
+  of image write operations 2.5 times or more.
+
+  The Cyrix 6x86, 6x86MX and M II processors have Address Range
+  Registers (ARRs) which provide a similar functionality to MTRRs. For
+  these, the ARRs are used to emulate the MTRRs.
+
+  The AMD K6-2 (stepping 8 and above) and K6-3 processors have two
+  MTRRs. These are supported.  The AMD Athlon family provide 8 Intel
+  style MTRRs.
+
+  The Centaur C6 (WinChip) has 8 MCRs, allowing write-combining. These
+  are supported.
+
+  The VIA Cyrix III and VIA C3 CPUs offer 8 Intel style MTRRs.
+
+  The CONFIG_MTRR option creates a /proc/mtrr file which may be used
+  to manipulate your MTRRs. Typically the X server should use
+  this. This should have a reasonably generic interface so that
+  similar control registers on other processors can be easily
+  supported.
+
+
+There are two interfaces to /proc/mtrr: one is an ASCII interface
+which allows you to read and write. The other is an ioctl()
+interface. The ASCII interface is meant for administration. The
+ioctl() interface is meant for C programs (i.e. the X server). The
+interfaces are described below, with sample commands and C code.
+
+===============================================================================
+Reading MTRRs from the shell:
+
+% cat /proc/mtrr
+reg00: base=0x00000000 (   0MB), size= 128MB: write-back, count=1
+reg01: base=0x08000000 ( 128MB), size=  64MB: write-back, count=1
+===============================================================================
+Creating MTRRs from the C-shell:
+# echo "base=0xf8000000 size=0x400000 type=write-combining" >! /proc/mtrr
+or if you use bash:
+# echo "base=0xf8000000 size=0x400000 type=write-combining" >| /proc/mtrr
+
+And the result thereof:
+% cat /proc/mtrr
+reg00: base=0x00000000 (   0MB), size= 128MB: write-back, count=1
+reg01: base=0x08000000 ( 128MB), size=  64MB: write-back, count=1
+reg02: base=0xf8000000 (3968MB), size=   4MB: write-combining, count=1
+
+This is for video RAM at base address 0xf8000000 and size 4 megabytes. To
+find out your base address, you need to look at the output of your X
+server, which tells you where the linear framebuffer address is. A
+typical line that you may get is:
+
+(--) S3: PCI: 968 rev 0, Linear FB @ 0xf8000000
+
+Note that you should only use the value from the X server, as it may
+move the framebuffer base address, so the only value you can trust is
+that reported by the X server.
+
+To find out the size of your framebuffer (what, you don't actually
+know?), the following line will tell you:
+
+(--) S3: videoram:  4096k
+
+That's 4 megabytes, which is 0x400000 bytes (in hexadecimal).
+A patch is being written for XFree86 which will make this automatic:
+in other words the X server will manipulate /proc/mtrr using the
+ioctl() interface, so users won't have to do anything. If you use a
+commercial X server, lobby your vendor to add support for MTRRs.
+===============================================================================
+Creating overlapping MTRRs:
+
+%echo "base=0xfb000000 size=0x1000000 type=write-combining" >/proc/mtrr
+%echo "base=0xfb000000 size=0x1000 type=uncachable" >/proc/mtrr
+
+And the results: cat /proc/mtrr
+reg00: base=0x00000000 (   0MB), size=  64MB: write-back, count=1
+reg01: base=0xfb000000 (4016MB), size=  16MB: write-combining, count=1
+reg02: base=0xfb000000 (4016MB), size=   4kB: uncachable, count=1
+
+Some cards (especially Voodoo Graphics boards) need this 4 kB area
+excluded from the beginning of the region because it is used for
+registers.
+
+NOTE: You can only create type=uncachable region, if the first
+region that you created is type=write-combining.
+===============================================================================
+Removing MTRRs from the C-shell:
+% echo "disable=2" >! /proc/mtrr
+or using bash:
+% echo "disable=2" >| /proc/mtrr
+===============================================================================
+Reading MTRRs from a C program using ioctl()'s:
+
+/*  mtrr-show.c
+
+    Source file for mtrr-show (example program to show MTRRs using ioctl()'s)
+
+    Copyright (C) 1997-1998  Richard Gooch
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+    Richard Gooch may be reached by email at  rgooch@atnf.csiro.au
+    The postal address is:
+      Richard Gooch, c/o ATNF, P. O. Box 76, Epping, N.S.W., 2121, Australia.
+*/
+
+/*
+    This program will use an ioctl() on /proc/mtrr to show the current MTRR
+    settings. This is an alternative to reading /proc/mtrr.
+
+
+    Written by      Richard Gooch   17-DEC-1997
+
+    Last updated by Richard Gooch   2-MAY-1998
+
+
+*/
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <sys/ioctl.h>
+#include <errno.h>
+#include <asm/mtrr.h>
+
+#define TRUE 1
+#define FALSE 0
+#define ERRSTRING strerror (errno)
+
+static char *mtrr_strings[MTRR_NUM_TYPES] =
+{
+    "uncachable",               /* 0 */
+    "write-combining",          /* 1 */
+    "?",                        /* 2 */
+    "?",                        /* 3 */
+    "write-through",            /* 4 */
+    "write-protect",            /* 5 */
+    "write-back",               /* 6 */
+};
+
+int main ()
+{
+    int fd;
+    struct mtrr_gentry gentry;
+
+    if ( ( fd = open ("/proc/mtrr", O_RDONLY, 0) ) == -1 )
+    {
+	if (errno == ENOENT)
+	{
+	    fputs ("/proc/mtrr not found: not supported or you don't have a PPro?\n",
+		   stderr);
+	    exit (1);
+	}
+	fprintf (stderr, "Error opening /proc/mtrr\t%s\n", ERRSTRING);
+	exit (2);
+    }
+    for (gentry.regnum = 0; ioctl (fd, MTRRIOC_GET_ENTRY, &gentry) == 0;
+	 ++gentry.regnum)
+    {
+	if (gentry.size < 1)
+	{
+	    fprintf (stderr, "Register: %u disabled\n", gentry.regnum);
+	    continue;
+	}
+	fprintf (stderr, "Register: %u base: 0x%lx size: 0x%lx type: %s\n",
+		 gentry.regnum, gentry.base, gentry.size,
+		 mtrr_strings[gentry.type]);
+    }
+    if (errno == EINVAL) exit (0);
+    fprintf (stderr, "Error doing ioctl(2) on /dev/mtrr\t%s\n", ERRSTRING);
+    exit (3);
+}   /*  End Function main  */
+===============================================================================
+Creating MTRRs from a C programme using ioctl()'s:
+
+/*  mtrr-add.c
+
+    Source file for mtrr-add (example programme to add an MTRRs using ioctl())
+
+    Copyright (C) 1997-1998  Richard Gooch
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+    Richard Gooch may be reached by email at  rgooch@atnf.csiro.au
+    The postal address is:
+      Richard Gooch, c/o ATNF, P. O. Box 76, Epping, N.S.W., 2121, Australia.
+*/
+
+/*
+    This programme will use an ioctl() on /proc/mtrr to add an entry. The first
+    available mtrr is used. This is an alternative to writing /proc/mtrr.
+
+
+    Written by      Richard Gooch   17-DEC-1997
+
+    Last updated by Richard Gooch   2-MAY-1998
+
+
+*/
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <sys/ioctl.h>
+#include <errno.h>
+#include <asm/mtrr.h>
+
+#define TRUE 1
+#define FALSE 0
+#define ERRSTRING strerror (errno)
+
+static char *mtrr_strings[MTRR_NUM_TYPES] =
+{
+    "uncachable",               /* 0 */
+    "write-combining",          /* 1 */
+    "?",                        /* 2 */
+    "?",                        /* 3 */
+    "write-through",            /* 4 */
+    "write-protect",            /* 5 */
+    "write-back",               /* 6 */
+};
+
+int main (int argc, char **argv)
+{
+    int fd;
+    struct mtrr_sentry sentry;
+
+    if (argc != 4)
+    {
+	fprintf (stderr, "Usage:\tmtrr-add base size type\n");
+	exit (1);
+    }
+    sentry.base = strtoul (argv[1], NULL, 0);
+    sentry.size = strtoul (argv[2], NULL, 0);
+    for (sentry.type = 0; sentry.type < MTRR_NUM_TYPES; ++sentry.type)
+    {
+	if (strcmp (argv[3], mtrr_strings[sentry.type]) == 0) break;
+    }
+    if (sentry.type >= MTRR_NUM_TYPES)
+    {
+	fprintf (stderr, "Illegal type: \"%s\"\n", argv[3]);
+	exit (2);
+    }
+    if ( ( fd = open ("/proc/mtrr", O_WRONLY, 0) ) == -1 )
+    {
+	if (errno == ENOENT)
+	{
+	    fputs ("/proc/mtrr not found: not supported or you don't have a PPro?\n",
+		   stderr);
+	    exit (3);
+	}
+	fprintf (stderr, "Error opening /proc/mtrr\t%s\n", ERRSTRING);
+	exit (4);
+    }
+    if (ioctl (fd, MTRRIOC_ADD_ENTRY, &sentry) == -1)
+    {
+	fprintf (stderr, "Error doing ioctl(2) on /dev/mtrr\t%s\n", ERRSTRING);
+	exit (5);
+    }
+    fprintf (stderr, "Sleeping for 5 seconds so you can see the new entry\n");
+    sleep (5);
+    close (fd);
+    fputs ("I've just closed /proc/mtrr so now the new entry should be gone\n",
+	   stderr);
+}   /*  End Function main  */
+===============================================================================
diff --git a/Documentation/x86/pat.txt b/Documentation/x86/pat.txt
new file mode 100644
index 0000000..c93ff5f
--- /dev/null
+++ b/Documentation/x86/pat.txt
@@ -0,0 +1,136 @@
+
+PAT (Page Attribute Table)
+
+x86 Page Attribute Table (PAT) allows for setting the memory attribute at the
+page level granularity. PAT is complementary to the MTRR settings which allows
+for setting of memory types over physical address ranges. However, PAT is
+more flexible than MTRR due to its capability to set attributes at page level
+and also due to the fact that there are no hardware limitations on number of
+such attribute settings allowed. Added flexibility comes with guidelines for
+not having memory type aliasing for the same physical memory with multiple
+virtual addresses.
+
+PAT allows for different types of memory attributes. The most commonly used
+ones that will be supported at this time are Write-back, Uncached,
+Write-combined and Uncached Minus.
+
+
+PAT APIs
+--------
+
+There are many different APIs in the kernel that allows setting of memory
+attributes at the page level. In order to avoid aliasing, these interfaces
+should be used thoughtfully. Below is a table of interfaces available,
+their intended usage and their memory attribute relationships. Internally,
+these APIs use a reserve_memtype()/free_memtype() interface on the physical
+address range to avoid any aliasing.
+
+
+-------------------------------------------------------------------
+API                    |    RAM   |  ACPI,...  |  Reserved/Holes  |
+-----------------------|----------|------------|------------------|
+                       |          |            |                  |
+ioremap                |    --    |    UC-     |       UC-        |
+                       |          |            |                  |
+ioremap_cache          |    --    |    WB      |       WB         |
+                       |          |            |                  |
+ioremap_nocache        |    --    |    UC-     |       UC-        |
+                       |          |            |                  |
+ioremap_wc             |    --    |    --      |       WC         |
+                       |          |            |                  |
+set_memory_uc          |    UC-   |    --      |       --         |
+ set_memory_wb         |          |            |                  |
+                       |          |            |                  |
+set_memory_wc          |    WC    |    --      |       --         |
+ set_memory_wb         |          |            |                  |
+                       |          |            |                  |
+pci sysfs resource     |    --    |    --      |       UC-        |
+                       |          |            |                  |
+pci sysfs resource_wc  |    --    |    --      |       WC         |
+ is IORESOURCE_PREFETCH|          |            |                  |
+                       |          |            |                  |
+pci proc               |    --    |    --      |       UC-        |
+ !PCIIOC_WRITE_COMBINE |          |            |                  |
+                       |          |            |                  |
+pci proc               |    --    |    --      |       WC         |
+ PCIIOC_WRITE_COMBINE  |          |            |                  |
+                       |          |            |                  |
+/dev/mem               |    --    |  WB/WC/UC- |    WB/WC/UC-     |
+ read-write            |          |            |                  |
+                       |          |            |                  |
+/dev/mem               |    --    |    UC-     |       UC-        |
+ mmap SYNC flag        |          |            |                  |
+                       |          |            |                  |
+/dev/mem               |    --    |  WB/WC/UC- |    WB/WC/UC-     |
+ mmap !SYNC flag       |          |(from exist-|  (from exist-    |
+ and                   |          |  ing alias)|    ing alias)    |
+ any alias to this area|          |            |                  |
+                       |          |            |                  |
+/dev/mem               |    --    |    WB      |       WB         |
+ mmap !SYNC flag       |          |            |                  |
+ no alias to this area |          |            |                  |
+ and                   |          |            |                  |
+ MTRR says WB          |          |            |                  |
+                       |          |            |                  |
+/dev/mem               |    --    |    --      |       UC-        |
+ mmap !SYNC flag       |          |            |                  |
+ no alias to this area |          |            |                  |
+ and                   |          |            |                  |
+ MTRR says !WB         |          |            |                  |
+                       |          |            |                  |
+-------------------------------------------------------------------
+
+Notes:
+
+-- in the above table mean "Not suggested usage for the API". Some of the --'s
+are strictly enforced by the kernel. Some others are not really enforced
+today, but may be enforced in future.
+
+For ioremap and pci access through /sys or /proc - The actual type returned
+can be more restrictive, in case of any existing aliasing for that address.
+For example: If there is an existing uncached mapping, a new ioremap_wc can
+return uncached mapping in place of write-combine requested.
+
+set_memory_[uc|wc] and set_memory_wb should be used in pairs, where driver will
+first make a region uc or wc and switch it back to wb after use.
+
+Over time writes to /proc/mtrr will be deprecated in favor of using PAT based
+interfaces. Users writing to /proc/mtrr are suggested to use above interfaces.
+
+Drivers should use ioremap_[uc|wc] to access PCI BARs with [uc|wc] access
+types.
+
+Drivers should use set_memory_[uc|wc] to set access type for RAM ranges.
+
+
+PAT debugging
+-------------
+
+With CONFIG_DEBUG_FS enabled, PAT memtype list can be examined by
+
+# mount -t debugfs debugfs /sys/kernel/debug
+# cat /sys/kernel/debug/x86/pat_memtype_list
+PAT memtype list:
+uncached-minus @ 0x7fadf000-0x7fae0000
+uncached-minus @ 0x7fb19000-0x7fb1a000
+uncached-minus @ 0x7fb1a000-0x7fb1b000
+uncached-minus @ 0x7fb1b000-0x7fb1c000
+uncached-minus @ 0x7fb1c000-0x7fb1d000
+uncached-minus @ 0x7fb1d000-0x7fb1e000
+uncached-minus @ 0x7fb1e000-0x7fb25000
+uncached-minus @ 0x7fb25000-0x7fb26000
+uncached-minus @ 0x7fb26000-0x7fb27000
+uncached-minus @ 0x7fb27000-0x7fb28000
+uncached-minus @ 0x7fb28000-0x7fb2e000
+uncached-minus @ 0x7fb2e000-0x7fb2f000
+uncached-minus @ 0x7fb2f000-0x7fb30000
+uncached-minus @ 0x7fb31000-0x7fb32000
+uncached-minus @ 0x80000000-0x90000000
+
+This list shows physical address ranges and various PAT settings used to
+access those physical address ranges.
+
+Another, more verbose way of getting PAT related debug messages is with
+"debugpat" boot parameter. With this parameter, various debug messages are
+printed to dmesg log.
+
diff --git a/Documentation/x86/usb-legacy-support.txt b/Documentation/x86/usb-legacy-support.txt
new file mode 100644
index 0000000..1894cdf
--- /dev/null
+++ b/Documentation/x86/usb-legacy-support.txt
@@ -0,0 +1,44 @@
+USB Legacy support
+~~~~~~~~~~~~~~~~~~
+
+Vojtech Pavlik <vojtech@suse.cz>, January 2004
+
+
+Also known as "USB Keyboard" or "USB Mouse support" in the BIOS Setup is a
+feature that allows one to use the USB mouse and keyboard as if they were
+their classic PS/2 counterparts.  This means one can use an USB keyboard to
+type in LILO for example.
+
+It has several drawbacks, though:
+
+1) On some machines, the emulated PS/2 mouse takes over even when no USB
+   mouse is present and a real PS/2 mouse is present.  In that case the extra
+   features (wheel, extra buttons, touchpad mode) of the real PS/2 mouse may
+   not be available.
+
+2) If CONFIG_HIGHMEM64G is enabled, the PS/2 mouse emulation can cause
+   system crashes, because the SMM BIOS is not expecting to be in PAE mode.
+   The Intel E7505 is a typical machine where this happens.
+
+3) If AMD64 64-bit mode is enabled, again system crashes often happen,
+   because the SMM BIOS isn't expecting the CPU to be in 64-bit mode.  The
+   BIOS manufacturers only test with Windows, and Windows doesn't do 64-bit
+   yet.
+
+Solutions:
+
+Problem 1) can be solved by loading the USB drivers prior to loading the
+PS/2 mouse driver. Since the PS/2 mouse driver is in 2.6 compiled into
+the kernel unconditionally, this means the USB drivers need to be
+compiled-in, too.
+
+Problem 2) can currently only be solved by either disabling HIGHMEM64G
+in the kernel config or USB Legacy support in the BIOS. A BIOS update
+could help, but so far no such update exists.
+
+Problem 3) is usually fixed by a BIOS update. Check the board
+manufacturers web site. If an update is not available, disable USB
+Legacy support in the BIOS. If this alone doesn't help, try also adding
+idle=poll on the kernel command line. The BIOS may be entering the SMM
+on the HLT instruction as well.
+
diff --git a/Documentation/x86/x86_64/00-INDEX b/Documentation/x86/x86_64/00-INDEX
new file mode 100644
index 0000000..92fc20a
--- /dev/null
+++ b/Documentation/x86/x86_64/00-INDEX
@@ -0,0 +1,16 @@
+00-INDEX
+	- This file
+boot-options.txt
+	- AMD64-specific boot options.
+cpu-hotplug-spec
+	- Firmware support for CPU hotplug under Linux/x86-64
+fake-numa-for-cpusets
+	- Using numa=fake and CPUSets for Resource Management
+kernel-stacks
+	- Context-specific per-processor interrupt stacks.
+machinecheck
+	- Configurable sysfs parameters for the x86-64 machine check code.
+mm.txt
+	- Memory layout of x86-64 (4 level page tables, 46 bits physical).
+uefi.txt
+	- Booting Linux via Unified Extensible Firmware Interface.
diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt
new file mode 100644
index 0000000..f6d561a
--- /dev/null
+++ b/Documentation/x86/x86_64/boot-options.txt
@@ -0,0 +1,310 @@
+AMD64 specific boot options
+
+There are many others (usually documented in driver documentation), but
+only the AMD64 specific ones are listed here.
+
+Machine check
+
+   mce=off disable machine check
+   mce=bootlog Enable logging of machine checks left over from booting.
+               Disabled by default on AMD because some BIOS leave bogus ones.
+               If your BIOS doesn't do that it's a good idea to enable though
+               to make sure you log even machine check events that result
+               in a reboot. On Intel systems it is enabled by default.
+   mce=nobootlog
+		Disable boot machine check logging.
+   mce=tolerancelevel (number)
+		0: always panic on uncorrected errors, log corrected errors
+		1: panic or SIGBUS on uncorrected errors, log corrected errors
+		2: SIGBUS or log uncorrected errors, log corrected errors
+		3: never panic or SIGBUS, log all errors (for testing only)
+		Default is 1
+		Can be also set using sysfs which is preferable.
+
+   nomce (for compatibility with i386): same as mce=off
+
+   Everything else is in sysfs now.
+
+APICs
+
+   apic		 Use IO-APIC. Default
+
+   noapic	 Don't use the IO-APIC.
+
+   disableapic	 Don't use the local APIC
+
+   nolapic	 Don't use the local APIC (alias for i386 compatibility)
+
+   pirq=...	 See Documentation/x86/i386/IO-APIC.txt
+
+   noapictimer	 Don't set up the APIC timer
+
+   no_timer_check Don't check the IO-APIC timer. This can work around
+		 problems with incorrect timer initialization on some boards.
+
+   apicmaintimer Run time keeping from the local APIC timer instead
+                 of using the PIT/HPET interrupt for this. This is useful
+                 when the PIT/HPET interrupts are unreliable.
+
+   noapicmaintimer  Don't do time keeping using the APIC timer.
+		 Useful when this option was auto selected, but doesn't work.
+
+   apicpmtimer
+		 Do APIC timer calibration using the pmtimer. Implies
+		 apicmaintimer. Useful when your PIT timer is totally
+		 broken.
+
+Early Console
+
+   syntax: earlyprintk=vga
+           earlyprintk=serial[,ttySn[,baudrate]]
+
+   The early console is useful when the kernel crashes before the
+   normal console is initialized. It is not enabled by
+   default because it has some cosmetic problems.
+   Append ,keep to not disable it when the real console takes over.
+   Only vga or serial at a time, not both.
+   Currently only ttyS0 and ttyS1 are supported.
+   Interaction with the standard serial driver is not very good.
+   The VGA output is eventually overwritten by the real console.
+
+Timing
+
+  notsc
+  Don't use the CPU time stamp counter to read the wall time.
+  This can be used to work around timing problems on multiprocessor systems
+  with not properly synchronized CPUs.
+
+  report_lost_ticks
+  Report when timer interrupts are lost because some code turned off
+  interrupts for too long.
+
+  nmi_watchdog=NUMBER[,panic]
+  NUMBER can be:
+  0 don't use an NMI watchdog
+  1 use the IO-APIC timer for the NMI watchdog
+  2 use the local APIC for the NMI watchdog using a performance counter. Note
+  This will use one performance counter and the local APIC's performance
+  vector.
+  When panic is specified panic when an NMI watchdog timeout occurs.
+  This is useful when you use a panic=... timeout and need the box
+  quickly up again.
+
+  nohpet
+  Don't use the HPET timer.
+
+Idle loop
+
+  idle=poll
+  Don't do power saving in the idle loop using HLT, but poll for rescheduling
+  event. This will make the CPUs eat a lot more power, but may be useful
+  to get slightly better performance in multiprocessor benchmarks. It also
+  makes some profiling using performance counters more accurate.
+  Please note that on systems with MONITOR/MWAIT support (like Intel EM64T
+  CPUs) this option has no performance advantage over the normal idle loop.
+  It may also interact badly with hyperthreading.
+
+Rebooting
+
+   reboot=b[ios] | t[riple] | k[bd] | a[cpi] | e[fi] [, [w]arm | [c]old]
+   bios	  Use the CPU reboot vector for warm reset
+   warm   Don't set the cold reboot flag
+   cold   Set the cold reboot flag
+   triple Force a triple fault (init)
+   kbd    Use the keyboard controller. cold reset (default)
+   acpi   Use the ACPI RESET_REG in the FADT. If ACPI is not configured or the
+          ACPI reset does not work, the reboot path attempts the reset using
+          the keyboard controller.
+   efi    Use efi reset_system runtime service. If EFI is not configured or the
+          EFI reset does not work, the reboot path attempts the reset using
+          the keyboard controller.
+
+   Using warm reset will be much faster especially on big memory
+   systems because the BIOS will not go through the memory check.
+   Disadvantage is that not all hardware will be completely reinitialized
+   on reboot so there may be boot problems on some systems.
+
+   reboot=force
+
+   Don't stop other CPUs on reboot. This can make reboot more reliable
+   in some cases.
+
+Non Executable Mappings
+
+  noexec=on|off
+
+  on      Enable(default)
+  off     Disable
+
+SMP
+
+  additional_cpus=NUM Allow NUM more CPUs for hotplug
+		 (defaults are specified by the BIOS, see Documentation/x86/x86_64/cpu-hotplug-spec)
+
+NUMA
+
+  numa=off	Only set up a single NUMA node spanning all memory.
+
+  numa=noacpi   Don't parse the SRAT table for NUMA setup
+
+  numa=fake=CMDLINE
+		If a number, fakes CMDLINE nodes and ignores NUMA setup of the
+		actual machine.  Otherwise, system memory is configured
+		depending on the sizes and coefficients listed.  For example:
+			numa=fake=2*512,1024,4*256,*128
+		gives two 512M nodes, a 1024M node, four 256M nodes, and the
+		rest split into 128M chunks.  If the last character of CMDLINE
+		is a *, the remaining memory is divided up equally among its
+		coefficient:
+			numa=fake=2*512,2*
+		gives two 512M nodes and the rest split into two nodes.
+		Otherwise, the remaining system RAM is allocated to an
+		additional node.
+
+  numa=hotadd=percent
+		Only allow hotadd memory to preallocate page structures upto
+		percent of already available memory.
+		numa=hotadd=0 will disable hotadd memory.
+
+ACPI
+
+  acpi=off	Don't enable ACPI
+  acpi=ht	Use ACPI boot table parsing, but don't enable ACPI
+		interpreter
+  acpi=force	Force ACPI on (currently not needed)
+
+  acpi=strict   Disable out of spec ACPI workarounds.
+
+  acpi_sci={edge,level,high,low}  Set up ACPI SCI interrupt.
+
+  acpi=noirq	Don't route interrupts
+
+PCI
+
+  pci=off	Don't use PCI
+  pci=conf1	Use conf1 access.
+  pci=conf2	Use conf2 access.
+  pci=rom	Assign ROMs.
+  pci=assign-busses    Assign busses
+  pci=irqmask=MASK	       Set PCI interrupt mask to MASK
+  pci=lastbus=NUMBER	       Scan upto NUMBER busses, no matter what the mptable says.
+  pci=noacpi		Don't use ACPI to set up PCI interrupt routing.
+
+IOMMU (input/output memory management unit)
+
+ Currently four x86-64 PCI-DMA mapping implementations exist:
+
+   1. <arch/x86_64/kernel/pci-nommu.c>: use no hardware/software IOMMU at all
+      (e.g. because you have < 3 GB memory).
+      Kernel boot message: "PCI-DMA: Disabling IOMMU"
+
+   2. <arch/x86_64/kernel/pci-gart.c>: AMD GART based hardware IOMMU.
+      Kernel boot message: "PCI-DMA: using GART IOMMU"
+
+   3. <arch/x86_64/kernel/pci-swiotlb.c> : Software IOMMU implementation. Used
+      e.g. if there is no hardware IOMMU in the system and it is need because
+      you have >3GB memory or told the kernel to us it (iommu=soft))
+      Kernel boot message: "PCI-DMA: Using software bounce buffering
+      for IO (SWIOTLB)"
+
+   4. <arch/x86_64/pci-calgary.c> : IBM Calgary hardware IOMMU. Used in IBM
+      pSeries and xSeries servers. This hardware IOMMU supports DMA address
+      mapping with memory protection, etc.
+      Kernel boot message: "PCI-DMA: Using Calgary IOMMU"
+
+ iommu=[<size>][,noagp][,off][,force][,noforce][,leak[=<nr_of_leak_pages>]
+	[,memaper[=<order>]][,merge][,forcesac][,fullflush][,nomerge]
+	[,noaperture][,calgary]
+
+  General iommu options:
+    off                Don't initialize and use any kind of IOMMU.
+    noforce            Don't force hardware IOMMU usage when it is not needed.
+                       (default).
+    force              Force the use of the hardware IOMMU even when it is
+                       not actually needed (e.g. because < 3 GB memory).
+    soft               Use software bounce buffering (SWIOTLB) (default for
+                       Intel machines). This can be used to prevent the usage
+                       of an available hardware IOMMU.
+
+  iommu options only relevant to the AMD GART hardware IOMMU:
+    <size>             Set the size of the remapping area in bytes.
+    allowed            Overwrite iommu off workarounds for specific chipsets.
+    fullflush          Flush IOMMU on each allocation (default).
+    nofullflush        Don't use IOMMU fullflush.
+    leak               Turn on simple iommu leak tracing (only when
+                       CONFIG_IOMMU_LEAK is on). Default number of leak pages
+                       is 20.
+    memaper[=<order>]  Allocate an own aperture over RAM with size 32MB<<order.
+                       (default: order=1, i.e. 64MB)
+    merge              Do scatter-gather (SG) merging. Implies "force"
+                       (experimental).
+    nomerge            Don't do scatter-gather (SG) merging.
+    noaperture         Ask the IOMMU not to touch the aperture for AGP.
+    forcesac           Force single-address cycle (SAC) mode for masks <40bits
+                       (experimental).
+    noagp              Don't initialize the AGP driver and use full aperture.
+    allowdac           Allow double-address cycle (DAC) mode, i.e. DMA >4GB.
+                       DAC is used with 32-bit PCI to push a 64-bit address in
+                       two cycles. When off all DMA over >4GB is forced through
+                       an IOMMU or software bounce buffering.
+    nodac              Forbid DAC mode, i.e. DMA >4GB.
+    panic              Always panic when IOMMU overflows.
+    calgary            Use the Calgary IOMMU if it is available
+
+  iommu options only relevant to the software bounce buffering (SWIOTLB) IOMMU
+  implementation:
+    swiotlb=<pages>[,force]
+    <pages>            Prereserve that many 128K pages for the software IO
+                       bounce buffering.
+    force              Force all IO through the software TLB.
+
+  Settings for the IBM Calgary hardware IOMMU currently found in IBM
+  pSeries and xSeries machines:
+
+    calgary=[64k,128k,256k,512k,1M,2M,4M,8M]
+    calgary=[translate_empty_slots]
+    calgary=[disable=<PCI bus number>]
+    panic              Always panic when IOMMU overflows
+
+    64k,...,8M - Set the size of each PCI slot's translation table
+    when using the Calgary IOMMU. This is the size of the translation
+    table itself in main memory. The smallest table, 64k, covers an IO
+    space of 32MB; the largest, 8MB table, can cover an IO space of
+    4GB. Normally the kernel will make the right choice by itself.
+
+    translate_empty_slots - Enable translation even on slots that have
+    no devices attached to them, in case a device will be hotplugged
+    in the future.
+
+    disable=<PCI bus number> - Disable translation on a given PHB. For
+    example, the built-in graphics adapter resides on the first bridge
+    (PCI bus number 0); if translation (isolation) is enabled on this
+    bridge, X servers that access the hardware directly from user
+    space might stop working. Use this option if you have devices that
+    are accessed from userspace directly on some PCI host bridge.
+
+Debugging
+
+  oops=panic	Always panic on oopses. Default is to just kill the process,
+		but there is a small probability of deadlocking the machine.
+		This will also cause panics on machine check exceptions.
+		Useful together with panic=30 to trigger a reboot.
+
+  kstack=N	Print N words from the kernel stack in oops dumps.
+
+  pagefaulttrace  Dump all page faults. Only useful for extreme debugging
+		and will create a lot of output.
+
+  call_trace=[old|both|newfallback|new]
+		old: use old inexact backtracer
+		new: use new exact dwarf2 unwinder
+ 		both: print entries from both
+		newfallback: use new unwinder but fall back to old if it gets
+			stuck (default)
+
+Miscellaneous
+
+	nogbpages
+		Do not use GB pages for kernel direct mappings.
+	gbpages
+		Use GB pages for kernel direct mappings.
diff --git a/Documentation/x86/x86_64/cpu-hotplug-spec b/Documentation/x86/x86_64/cpu-hotplug-spec
new file mode 100644
index 0000000..3c23e05
--- /dev/null
+++ b/Documentation/x86/x86_64/cpu-hotplug-spec
@@ -0,0 +1,21 @@
+Firmware support for CPU hotplug under Linux/x86-64
+---------------------------------------------------
+
+Linux/x86-64 supports CPU hotplug now. For various reasons Linux wants to
+know in advance of boot time the maximum number of CPUs that could be plugged
+into the system. ACPI 3.0 currently has no official way to supply
+this information from the firmware to the operating system.
+
+In ACPI each CPU needs an LAPIC object in the MADT table (5.2.11.5 in the
+ACPI 3.0 specification).  ACPI already has the concept of disabled LAPIC
+objects by setting the Enabled bit in the LAPIC object to zero.
+
+For CPU hotplug Linux/x86-64 expects now that any possible future hotpluggable
+CPU is already available in the MADT. If the CPU is not available yet
+it should have its LAPIC Enabled bit set to 0. Linux will use the number
+of disabled LAPICs to compute the maximum number of future CPUs.
+
+In the worst case the user can overwrite this choice using a command line
+option (additional_cpus=...), but it is recommended to supply the correct
+number (or a reasonable approximation of it, with erring towards more not less)
+in the MADT to avoid manual configuration.
diff --git a/Documentation/x86/x86_64/fake-numa-for-cpusets b/Documentation/x86/x86_64/fake-numa-for-cpusets
new file mode 100644
index 0000000..33bb566
--- /dev/null
+++ b/Documentation/x86/x86_64/fake-numa-for-cpusets
@@ -0,0 +1,66 @@
+Using numa=fake and CPUSets for Resource Management
+Written by David Rientjes <rientjes@cs.washington.edu>
+
+This document describes how the numa=fake x86_64 command-line option can be used
+in conjunction with cpusets for coarse memory management.  Using this feature,
+you can create fake NUMA nodes that represent contiguous chunks of memory and
+assign them to cpusets and their attached tasks.  This is a way of limiting the
+amount of system memory that are available to a certain class of tasks.
+
+For more information on the features of cpusets, see Documentation/cpusets.txt.
+There are a number of different configurations you can use for your needs.  For
+more information on the numa=fake command line option and its various ways of
+configuring fake nodes, see Documentation/x86/x86_64/boot-options.txt.
+
+For the purposes of this introduction, we'll assume a very primitive NUMA
+emulation setup of "numa=fake=4*512,".  This will split our system memory into
+four equal chunks of 512M each that we can now use to assign to cpusets.  As
+you become more familiar with using this combination for resource control,
+you'll determine a better setup to minimize the number of nodes you have to deal
+with.
+
+A machine may be split as follows with "numa=fake=4*512," as reported by dmesg:
+
+	Faking node 0 at 0000000000000000-0000000020000000 (512MB)
+	Faking node 1 at 0000000020000000-0000000040000000 (512MB)
+	Faking node 2 at 0000000040000000-0000000060000000 (512MB)
+	Faking node 3 at 0000000060000000-0000000080000000 (512MB)
+	...
+	On node 0 totalpages: 130975
+	On node 1 totalpages: 131072
+	On node 2 totalpages: 131072
+	On node 3 totalpages: 131072
+
+Now following the instructions for mounting the cpusets filesystem from
+Documentation/cpusets.txt, you can assign fake nodes (i.e. contiguous memory
+address spaces) to individual cpusets:
+
+	[root@xroads /]# mkdir exampleset
+	[root@xroads /]# mount -t cpuset none exampleset
+	[root@xroads /]# mkdir exampleset/ddset
+	[root@xroads /]# cd exampleset/ddset
+	[root@xroads /exampleset/ddset]# echo 0-1 > cpus
+	[root@xroads /exampleset/ddset]# echo 0-1 > mems
+
+Now this cpuset, 'ddset', will only allowed access to fake nodes 0 and 1 for
+memory allocations (1G).
+
+You can now assign tasks to these cpusets to limit the memory resources
+available to them according to the fake nodes assigned as mems:
+
+	[root@xroads /exampleset/ddset]# echo $$ > tasks
+	[root@xroads /exampleset/ddset]# dd if=/dev/zero of=tmp bs=1024 count=1G
+	[1] 13425
+
+Notice the difference between the system memory usage as reported by
+/proc/meminfo between the restricted cpuset case above and the unrestricted
+case (i.e. running the same 'dd' command without assigning it to a fake NUMA
+cpuset):
+				Unrestricted	Restricted
+	MemTotal:		3091900 kB	3091900 kB
+	MemFree:		  42113 kB	1513236 kB
+
+This allows for coarse memory management for the tasks you assign to particular
+cpusets.  Since cpusets can form a hierarchy, you can create some pretty
+interesting combinations of use-cases for various classes of tasks for your
+memory management needs.
diff --git a/Documentation/x86/x86_64/kernel-stacks b/Documentation/x86/x86_64/kernel-stacks
new file mode 100644
index 0000000..5ad65d5
--- /dev/null
+++ b/Documentation/x86/x86_64/kernel-stacks
@@ -0,0 +1,99 @@
+Most of the text from Keith Owens, hacked by AK
+
+x86_64 page size (PAGE_SIZE) is 4K.
+
+Like all other architectures, x86_64 has a kernel stack for every
+active thread.  These thread stacks are THREAD_SIZE (2*PAGE_SIZE) big.
+These stacks contain useful data as long as a thread is alive or a
+zombie. While the thread is in user space the kernel stack is empty
+except for the thread_info structure at the bottom.
+
+In addition to the per thread stacks, there are specialized stacks
+associated with each CPU.  These stacks are only used while the kernel
+is in control on that CPU; when a CPU returns to user space the
+specialized stacks contain no useful data.  The main CPU stacks are:
+
+* Interrupt stack.  IRQSTACKSIZE
+
+  Used for external hardware interrupts.  If this is the first external
+  hardware interrupt (i.e. not a nested hardware interrupt) then the
+  kernel switches from the current task to the interrupt stack.  Like
+  the split thread and interrupt stacks on i386 (with CONFIG_4KSTACKS),
+  this gives more room for kernel interrupt processing without having
+  to increase the size of every per thread stack.
+
+  The interrupt stack is also used when processing a softirq.
+
+Switching to the kernel interrupt stack is done by software based on a
+per CPU interrupt nest counter. This is needed because x86-64 "IST"
+hardware stacks cannot nest without races.
+
+x86_64 also has a feature which is not available on i386, the ability
+to automatically switch to a new stack for designated events such as
+double fault or NMI, which makes it easier to handle these unusual
+events on x86_64.  This feature is called the Interrupt Stack Table
+(IST).  There can be up to 7 IST entries per CPU. The IST code is an
+index into the Task State Segment (TSS). The IST entries in the TSS
+point to dedicated stacks; each stack can be a different size.
+
+An IST is selected by a non-zero value in the IST field of an
+interrupt-gate descriptor.  When an interrupt occurs and the hardware
+loads such a descriptor, the hardware automatically sets the new stack
+pointer based on the IST value, then invokes the interrupt handler.  If
+software wants to allow nested IST interrupts then the handler must
+adjust the IST values on entry to and exit from the interrupt handler.
+(This is occasionally done, e.g. for debug exceptions.)
+
+Events with different IST codes (i.e. with different stacks) can be
+nested.  For example, a debug interrupt can safely be interrupted by an
+NMI.  arch/x86_64/kernel/entry.S::paranoidentry adjusts the stack
+pointers on entry to and exit from all IST events, in theory allowing
+IST events with the same code to be nested.  However in most cases, the
+stack size allocated to an IST assumes no nesting for the same code.
+If that assumption is ever broken then the stacks will become corrupt.
+
+The currently assigned IST stacks are :-
+
+* STACKFAULT_STACK.  EXCEPTION_STKSZ (PAGE_SIZE).
+
+  Used for interrupt 12 - Stack Fault Exception (#SS).
+
+  This allows the CPU to recover from invalid stack segments. Rarely
+  happens.
+
+* DOUBLEFAULT_STACK.  EXCEPTION_STKSZ (PAGE_SIZE).
+
+  Used for interrupt 8 - Double Fault Exception (#DF).
+
+  Invoked when handling one exception causes another exception. Happens
+  when the kernel is very confused (e.g. kernel stack pointer corrupt).
+  Using a separate stack allows the kernel to recover from it well enough
+  in many cases to still output an oops.
+
+* NMI_STACK.  EXCEPTION_STKSZ (PAGE_SIZE).
+
+  Used for non-maskable interrupts (NMI).
+
+  NMI can be delivered at any time, including when the kernel is in the
+  middle of switching stacks.  Using IST for NMI events avoids making
+  assumptions about the previous state of the kernel stack.
+
+* DEBUG_STACK.  DEBUG_STKSZ
+
+  Used for hardware debug interrupts (interrupt 1) and for software
+  debug interrupts (INT3).
+
+  When debugging a kernel, debug interrupts (both hardware and
+  software) can occur at any time.  Using IST for these interrupts
+  avoids making assumptions about the previous state of the kernel
+  stack.
+
+* MCE_STACK.  EXCEPTION_STKSZ (PAGE_SIZE).
+
+  Used for interrupt 18 - Machine Check Exception (#MC).
+
+  MCE can be delivered at any time, including when the kernel is in the
+  middle of switching stacks.  Using IST for MCE events avoids making
+  assumptions about the previous state of the kernel stack.
+
+For more details see the Intel IA32 or AMD AMD64 architecture manuals.
diff --git a/Documentation/x86/x86_64/machinecheck b/Documentation/x86/x86_64/machinecheck
new file mode 100644
index 0000000..a05e58e
--- /dev/null
+++ b/Documentation/x86/x86_64/machinecheck
@@ -0,0 +1,77 @@
+
+Configurable sysfs parameters for the x86-64 machine check code.
+
+Machine checks report internal hardware error conditions detected
+by the CPU. Uncorrected errors typically cause a machine check
+(often with panic), corrected ones cause a machine check log entry.
+
+Machine checks are organized in banks (normally associated with
+a hardware subsystem) and subevents in a bank. The exact meaning
+of the banks and subevent is CPU specific.
+
+mcelog knows how to decode them.
+
+When you see the "Machine check errors logged" message in the system
+log then mcelog should run to collect and decode machine check entries
+from /dev/mcelog. Normally mcelog should be run regularly from a cronjob.
+
+Each CPU has a directory in /sys/devices/system/machinecheck/machinecheckN
+(N = CPU number)
+
+The directory contains some configurable entries:
+
+Entries:
+
+bankNctl
+(N bank number)
+	64bit Hex bitmask enabling/disabling specific subevents for bank N
+	When a bit in the bitmask is zero then the respective
+	subevent will not be reported.
+	By default all events are enabled.
+	Note that BIOS maintain another mask to disable specific events
+	per bank.  This is not visible here
+
+The following entries appear for each CPU, but they are truly shared
+between all CPUs.
+
+check_interval
+	How often to poll for corrected machine check errors, in seconds
+	(Note output is hexademical). Default 5 minutes.  When the poller
+	finds MCEs it triggers an exponential speedup (poll more often) on
+	the polling interval.  When the poller stops finding MCEs, it
+	triggers an exponential backoff (poll less often) on the polling
+	interval. The check_interval variable is both the initial and
+	maximum polling interval.
+
+tolerant
+	Tolerance level. When a machine check exception occurs for a non
+	corrected machine check the kernel can take different actions.
+	Since machine check exceptions can happen any time it is sometimes
+	risky for the kernel to kill a process because it defies
+	normal kernel locking rules. The tolerance level configures
+	how hard the kernel tries to recover even at some risk of
+	deadlock.  Higher tolerant values trade potentially better uptime
+	with the risk of a crash or even corruption (for tolerant >= 3).
+
+	0: always panic on uncorrected errors, log corrected errors
+	1: panic or SIGBUS on uncorrected errors, log corrected errors
+	2: SIGBUS or log uncorrected errors, log corrected errors
+	3: never panic or SIGBUS, log all errors (for testing only)
+
+	Default: 1
+
+	Note this only makes a difference if the CPU allows recovery
+	from a machine check exception. Current x86 CPUs generally do not.
+
+trigger
+	Program to run when a machine check event is detected.
+	This is an alternative to running mcelog regularly from cron
+	and allows to detect events faster.
+
+TBD document entries for AMD threshold interrupt configuration
+
+For more details about the x86 machine check architecture
+see the Intel and AMD architecture manuals from their developer websites.
+
+For more details about the architecture see
+see http://one.firstfloor.org/~andi/mce.pdf
diff --git a/Documentation/x86/x86_64/mm.txt b/Documentation/x86/x86_64/mm.txt
new file mode 100644
index 0000000..efce750
--- /dev/null
+++ b/Documentation/x86/x86_64/mm.txt
@@ -0,0 +1,28 @@
+
+<previous description obsolete, deleted>
+
+Virtual memory map with 4 level page tables:
+
+0000000000000000 - 00007fffffffffff (=47 bits) user space, different per mm
+hole caused by [48:63] sign extension
+ffff800000000000 - ffff80ffffffffff (=40 bits) guard hole
+ffff810000000000 - ffffc0ffffffffff (=46 bits) direct mapping of all phys. memory
+ffffc10000000000 - ffffc1ffffffffff (=40 bits) hole
+ffffc20000000000 - ffffe1ffffffffff (=45 bits) vmalloc/ioremap space
+ffffe20000000000 - ffffe2ffffffffff (=40 bits) virtual memory map (1TB)
+... unused hole ...
+ffffffff80000000 - ffffffffa0000000 (=512 MB)  kernel text mapping, from phys 0
+ffffffffa0000000 - fffffffffff00000 (=1536 MB) module mapping space
+
+The direct mapping covers all memory in the system up to the highest
+memory address (this means in some cases it can also include PCI memory
+holes).
+
+vmalloc space is lazily synchronized into the different PML4 pages of
+the processes using the page fault handler, with init_level4_pgt as
+reference.
+
+Current X86-64 implementations only support 40 bits of address space,
+but we support up to 46 bits. This expands into MBZ space in the page tables.
+
+-Andi Kleen, Jul 2004
diff --git a/Documentation/x86/x86_64/uefi.txt b/Documentation/x86/x86_64/uefi.txt
new file mode 100644
index 0000000..a5e2b4f
--- /dev/null
+++ b/Documentation/x86/x86_64/uefi.txt
@@ -0,0 +1,42 @@
+General note on [U]EFI x86_64 support
+-------------------------------------
+
+The nomenclature EFI and UEFI are used interchangeably in this document.
+
+Although the tools below are _not_ needed for building the kernel,
+the needed bootloader support and associated tools for x86_64 platforms
+with EFI firmware and specifications are listed below.
+
+1. UEFI specification:  http://www.uefi.org
+
+2. Booting Linux kernel on UEFI x86_64 platform requires bootloader
+   support. Elilo with x86_64 support can be used.
+
+3. x86_64 platform with EFI/UEFI firmware.
+
+Mechanics:
+---------
+- Build the kernel with the following configuration.
+	CONFIG_FB_EFI=y
+	CONFIG_FRAMEBUFFER_CONSOLE=y
+  If EFI runtime services are expected, the following configuration should
+  be selected.
+	CONFIG_EFI=y
+	CONFIG_EFI_VARS=y or m		# optional
+- Create a VFAT partition on the disk
+- Copy the following to the VFAT partition:
+	elilo bootloader with x86_64 support, elilo configuration file,
+	kernel image built in first step and corresponding
+	initrd. Instructions on building elilo	and its dependencies
+	can be found in the elilo sourceforge project.
+- Boot to EFI shell and invoke elilo choosing the kernel image built
+  in first step.
+- If some or all EFI runtime services don't work, you can try following
+  kernel command line parameters to turn off some or all EFI runtime
+  services.
+	noefi		turn off all EFI runtime services
+	reboot_type=k	turn off EFI reboot runtime service
+- If the EFI memory map has additional entries not in the E820 map,
+  you can include those entries in the kernels memory map of available
+  physical RAM by using the following kernel command line parameter.
+	add_efi_memmap	include EFI memory map of available physical RAM
diff --git a/Documentation/x86/zero-page.txt b/Documentation/x86/zero-page.txt
new file mode 100644
index 0000000..169ad42
--- /dev/null
+++ b/Documentation/x86/zero-page.txt
@@ -0,0 +1,31 @@
+The additional fields in struct boot_params as a part of 32-bit boot
+protocol of kernel. These should be filled by bootloader or 16-bit
+real-mode setup code of the kernel. References/settings to it mainly
+are in:
+
+  include/asm-x86/bootparam.h
+
+
+Offset	Proto	Name		Meaning
+/Size
+
+000/040	ALL	screen_info	Text mode or frame buffer information
+				(struct screen_info)
+040/014	ALL	apm_bios_info	APM BIOS information (struct apm_bios_info)
+060/010	ALL	ist_info	Intel SpeedStep (IST) BIOS support information
+				(struct ist_info)
+080/010	ALL	hd0_info	hd0 disk parameter, OBSOLETE!!
+090/010	ALL	hd1_info	hd1 disk parameter, OBSOLETE!!
+0A0/010	ALL	sys_desc_table	System description table (struct sys_desc_table)
+140/080	ALL	edid_info	Video mode setup (struct edid_info)
+1C0/020	ALL	efi_info	EFI 32 information (struct efi_info)
+1E0/004	ALL	alk_mem_k	Alternative mem check, in KB
+1E4/004	ALL	scratch		Scratch field for the kernel setup code
+1E8/001	ALL	e820_entries	Number of entries in e820_map (below)
+1E9/001	ALL	eddbuf_entries	Number of entries in eddbuf (below)
+1EA/001	ALL	edd_mbr_sig_buf_entries	Number of entries in edd_mbr_sig_buffer
+				(below)
+290/040	ALL	edd_mbr_sig_buffer EDD MBR signatures
+2D0/A00	ALL	e820_map	E820 memory map table
+				(array of struct e820entry)
+D00/1EC	ALL	eddbuf		EDD data (array of struct edd_info)