summaryrefslogtreecommitdiffstats
path: root/Documentation/x86/pat.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/x86/pat.txt')
-rw-r--r--Documentation/x86/pat.txt136
1 files changed, 136 insertions, 0 deletions
diff --git a/Documentation/x86/pat.txt b/Documentation/x86/pat.txt
new file mode 100644
index 0000000..c93ff5f
--- /dev/null
+++ b/Documentation/x86/pat.txt
@@ -0,0 +1,136 @@
+
+PAT (Page Attribute Table)
+
+x86 Page Attribute Table (PAT) allows for setting the memory attribute at the
+page level granularity. PAT is complementary to the MTRR settings which allows
+for setting of memory types over physical address ranges. However, PAT is
+more flexible than MTRR due to its capability to set attributes at page level
+and also due to the fact that there are no hardware limitations on number of
+such attribute settings allowed. Added flexibility comes with guidelines for
+not having memory type aliasing for the same physical memory with multiple
+virtual addresses.
+
+PAT allows for different types of memory attributes. The most commonly used
+ones that will be supported at this time are Write-back, Uncached,
+Write-combined and Uncached Minus.
+
+
+PAT APIs
+--------
+
+There are many different APIs in the kernel that allows setting of memory
+attributes at the page level. In order to avoid aliasing, these interfaces
+should be used thoughtfully. Below is a table of interfaces available,
+their intended usage and their memory attribute relationships. Internally,
+these APIs use a reserve_memtype()/free_memtype() interface on the physical
+address range to avoid any aliasing.
+
+
+-------------------------------------------------------------------
+API | RAM | ACPI,... | Reserved/Holes |
+-----------------------|----------|------------|------------------|
+ | | | |
+ioremap | -- | UC- | UC- |
+ | | | |
+ioremap_cache | -- | WB | WB |
+ | | | |
+ioremap_nocache | -- | UC- | UC- |
+ | | | |
+ioremap_wc | -- | -- | WC |
+ | | | |
+set_memory_uc | UC- | -- | -- |
+ set_memory_wb | | | |
+ | | | |
+set_memory_wc | WC | -- | -- |
+ set_memory_wb | | | |
+ | | | |
+pci sysfs resource | -- | -- | UC- |
+ | | | |
+pci sysfs resource_wc | -- | -- | WC |
+ is IORESOURCE_PREFETCH| | | |
+ | | | |
+pci proc | -- | -- | UC- |
+ !PCIIOC_WRITE_COMBINE | | | |
+ | | | |
+pci proc | -- | -- | WC |
+ PCIIOC_WRITE_COMBINE | | | |
+ | | | |
+/dev/mem | -- | WB/WC/UC- | WB/WC/UC- |
+ read-write | | | |
+ | | | |
+/dev/mem | -- | UC- | UC- |
+ mmap SYNC flag | | | |
+ | | | |
+/dev/mem | -- | WB/WC/UC- | WB/WC/UC- |
+ mmap !SYNC flag | |(from exist-| (from exist- |
+ and | | ing alias)| ing alias) |
+ any alias to this area| | | |
+ | | | |
+/dev/mem | -- | WB | WB |
+ mmap !SYNC flag | | | |
+ no alias to this area | | | |
+ and | | | |
+ MTRR says WB | | | |
+ | | | |
+/dev/mem | -- | -- | UC- |
+ mmap !SYNC flag | | | |
+ no alias to this area | | | |
+ and | | | |
+ MTRR says !WB | | | |
+ | | | |
+-------------------------------------------------------------------
+
+Notes:
+
+-- in the above table mean "Not suggested usage for the API". Some of the --'s
+are strictly enforced by the kernel. Some others are not really enforced
+today, but may be enforced in future.
+
+For ioremap and pci access through /sys or /proc - The actual type returned
+can be more restrictive, in case of any existing aliasing for that address.
+For example: If there is an existing uncached mapping, a new ioremap_wc can
+return uncached mapping in place of write-combine requested.
+
+set_memory_[uc|wc] and set_memory_wb should be used in pairs, where driver will
+first make a region uc or wc and switch it back to wb after use.
+
+Over time writes to /proc/mtrr will be deprecated in favor of using PAT based
+interfaces. Users writing to /proc/mtrr are suggested to use above interfaces.
+
+Drivers should use ioremap_[uc|wc] to access PCI BARs with [uc|wc] access
+types.
+
+Drivers should use set_memory_[uc|wc] to set access type for RAM ranges.
+
+
+PAT debugging
+-------------
+
+With CONFIG_DEBUG_FS enabled, PAT memtype list can be examined by
+
+# mount -t debugfs debugfs /sys/kernel/debug
+# cat /sys/kernel/debug/x86/pat_memtype_list
+PAT memtype list:
+uncached-minus @ 0x7fadf000-0x7fae0000
+uncached-minus @ 0x7fb19000-0x7fb1a000
+uncached-minus @ 0x7fb1a000-0x7fb1b000
+uncached-minus @ 0x7fb1b000-0x7fb1c000
+uncached-minus @ 0x7fb1c000-0x7fb1d000
+uncached-minus @ 0x7fb1d000-0x7fb1e000
+uncached-minus @ 0x7fb1e000-0x7fb25000
+uncached-minus @ 0x7fb25000-0x7fb26000
+uncached-minus @ 0x7fb26000-0x7fb27000
+uncached-minus @ 0x7fb27000-0x7fb28000
+uncached-minus @ 0x7fb28000-0x7fb2e000
+uncached-minus @ 0x7fb2e000-0x7fb2f000
+uncached-minus @ 0x7fb2f000-0x7fb30000
+uncached-minus @ 0x7fb31000-0x7fb32000
+uncached-minus @ 0x80000000-0x90000000
+
+This list shows physical address ranges and various PAT settings used to
+access those physical address ranges.
+
+Another, more verbose way of getting PAT related debug messages is with
+"debugpat" boot parameter. With this parameter, various debug messages are
+printed to dmesg log.
+
OpenPOWER on IntegriCloud