diff options
| author | Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> | 2014-08-06 15:09:15 +0000 |
|---|---|---|
| committer | Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> | 2014-08-06 15:09:15 +0000 |
| commit | 6697f71ade7b6428c7be6051c02dbb9768900e04 (patch) | |
| tree | 23a2f8596d493396b7d9571ee91888e3f49c49f9 /Documentation | |
| parent | 88b19257cb41c97123d832460c944abc588a8e89 (diff) | |
| download | ast2050-flashrom-6697f71ade7b6428c7be6051c02dbb9768900e04.zip ast2050-flashrom-6697f71ade7b6428c7be6051c02dbb9768900e04.tar.gz | |
Add a bunch of new/tested stuff and various small changes 21
Tested mainboards:
OK:
- ASUS F2A85-M
Reported by various corebooters
- ASUS M2N-MX SE Plus
Reported by Antonio
- ASUS P5LD2
Reported by François Revol
- Lenovo ThinkPad T530
Reported and partially authored by Edward O'Callaghan
- MSI MS-7502 (Medion MD8833)
Reported by naq on IRC
- Shuttle AB61
Reported by olofolleola4
- ZOTAC IONITX-F-E
Reported by Bernardo Kuri
Flash chips:
- Atmel AT45DB021D to PREW (+PREW)
Reported by The Raven
- Atmel AT25F4096 to PREW (+PREW)
Reported by 공준혁
- GigaDevice GD25Q16(B) to PREW (+PREW)
Reported by luxflow@live.com using a GD25Q16BSIG
- Catalyst CAT28F512
Mark erase and write as known bad (not implemented)
Miscellaneous:
- Various spelling corrections by Daniele Forsi.
- Added and refined a bunch of chips originally investigated by Carl-Daniel.
- Marked the ARM-USB-OCD-H programmer as tested
(reported by Ruud Schramp).
- Tiny other stuff.
Corresponding to flashrom svn r1839.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/serprog-protocol.txt | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/Documentation/serprog-protocol.txt b/Documentation/serprog-protocol.txt index 58f4417..6b7e7e3 100644 --- a/Documentation/serprog-protocol.txt +++ b/Documentation/serprog-protocol.txt @@ -74,7 +74,7 @@ Additional information of the above commands: Send and receive bytes via SPI. Maximum slen is Q_WRNMAXLEN in case Q_BUSTYPE returns SPI only or S_BUSTYPE was used to set SPI exclusively before. Same for rlen and Q_RDNMAXLEN. - This operation is immediate, meaning it doesnt use the operation buffer. + This operation is immediate, meaning it doesn't use the operation buffer. 0x14 (S_SPI_FREQ): Set the SPI clock frequency. The 32-bit value indicates the requested frequency in Hertz. Value 0 is reserved and should |
