From 6697f71ade7b6428c7be6051c02dbb9768900e04 Mon Sep 17 00:00:00 2001 From: Stefan Tauner Date: Wed, 6 Aug 2014 15:09:15 +0000 Subject: Add a bunch of new/tested stuff and various small changes 21 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Tested mainboards: OK: - ASUS F2A85-M Reported by various corebooters - ASUS M2N-MX SE Plus Reported by Antonio - ASUS P5LD2 Reported by François Revol - Lenovo ThinkPad T530 Reported and partially authored by Edward O'Callaghan - MSI MS-7502 (Medion MD8833) Reported by naq on IRC - Shuttle AB61 Reported by olofolleola4 - ZOTAC IONITX-F-E Reported by Bernardo Kuri Flash chips: - Atmel AT45DB021D to PREW (+PREW) Reported by The Raven - Atmel AT25F4096 to PREW (+PREW) Reported by 공준혁 - GigaDevice GD25Q16(B) to PREW (+PREW) Reported by luxflow@live.com using a GD25Q16BSIG - Catalyst CAT28F512 Mark erase and write as known bad (not implemented) Miscellaneous: - Various spelling corrections by Daniele Forsi. - Added and refined a bunch of chips originally investigated by Carl-Daniel. - Marked the ARM-USB-OCD-H programmer as tested (reported by Ruud Schramp). - Tiny other stuff. Corresponding to flashrom svn r1839. Signed-off-by: Stefan Tauner Acked-by: Stefan Tauner --- Documentation/serprog-protocol.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/serprog-protocol.txt b/Documentation/serprog-protocol.txt index 58f4417..6b7e7e3 100644 --- a/Documentation/serprog-protocol.txt +++ b/Documentation/serprog-protocol.txt @@ -74,7 +74,7 @@ Additional information of the above commands: Send and receive bytes via SPI. Maximum slen is Q_WRNMAXLEN in case Q_BUSTYPE returns SPI only or S_BUSTYPE was used to set SPI exclusively before. Same for rlen and Q_RDNMAXLEN. - This operation is immediate, meaning it doesnt use the operation buffer. + This operation is immediate, meaning it doesn't use the operation buffer. 0x14 (S_SPI_FREQ): Set the SPI clock frequency. The 32-bit value indicates the requested frequency in Hertz. Value 0 is reserved and should -- cgit v1.1