diff options
Diffstat (limited to 'ar5211/ar5211_beacon.c')
| -rw-r--r-- | ar5211/ar5211_beacon.c | 176 |
1 files changed, 176 insertions, 0 deletions
diff --git a/ar5211/ar5211_beacon.c b/ar5211/ar5211_beacon.c new file mode 100644 index 0000000..de14198 --- /dev/null +++ b/ar5211/ar5211_beacon.c @@ -0,0 +1,176 @@ +/* + * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting + * Copyright (c) 2002-2006 Atheros Communications, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + * $Id: ar5211_beacon.c,v 1.4 2008/11/10 04:08:02 sam Exp $ + */ +#include "opt_ah.h" + +#ifdef AH_SUPPORT_AR5211 + +#include "ah.h" +#include "ah_internal.h" + +#include "ar5211/ar5211.h" +#include "ar5211/ar5211reg.h" +#include "ar5211/ar5211desc.h" + +/* + * Routines used to initialize and generated beacons for the AR5211/AR5311. + */ + +/* + * Initialize all of the hardware registers used to send beacons. + */ +void +ar5211SetBeaconTimers(struct ath_hal *ah, const HAL_BEACON_TIMERS *bt) +{ + + OS_REG_WRITE(ah, AR_TIMER0, bt->bt_nexttbtt); + OS_REG_WRITE(ah, AR_TIMER1, bt->bt_nextdba); + OS_REG_WRITE(ah, AR_TIMER2, bt->bt_nextswba); + OS_REG_WRITE(ah, AR_TIMER3, bt->bt_nextatim); + /* + * Set the Beacon register after setting all timers. + */ + OS_REG_WRITE(ah, AR_BEACON, bt->bt_intval); +} + +/* + * Legacy api to initialize all of the beacon registers. + */ +void +ar5211BeaconInit(struct ath_hal *ah, + uint32_t next_beacon, uint32_t beacon_period) +{ + HAL_BEACON_TIMERS bt; + + bt.bt_nexttbtt = next_beacon; + /* + * TIMER1: in AP/adhoc mode this controls the DMA beacon + * alert timer; otherwise it controls the next wakeup time. + * TIMER2: in AP mode, it controls the SBA beacon alert + * interrupt; otherwise it sets the start of the next CFP. + */ + switch (AH_PRIVATE(ah)->ah_opmode) { + case HAL_M_STA: + case HAL_M_MONITOR: + bt.bt_nextdba = 0xffff; + bt.bt_nextswba = 0x7ffff; + break; + case HAL_M_IBSS: + case HAL_M_HOSTAP: + bt.bt_nextdba = (next_beacon - + ath_hal_dma_beacon_response_time) << 3; /* 1/8 TU */ + bt.bt_nextswba = (next_beacon - + ath_hal_sw_beacon_response_time) << 3; /* 1/8 TU */ + break; + } + /* + * Set the ATIM window + * Our hardware does not support an ATIM window of 0 + * (beacons will not work). If the ATIM windows is 0, + * force it to 1. + */ + bt.bt_nextatim = next_beacon + 1; + bt.bt_intval = beacon_period & + (AR_BEACON_PERIOD | AR_BEACON_RESET_TSF | AR_BEACON_EN); + ar5211SetBeaconTimers(ah, &bt); +} + +void +ar5211ResetStaBeaconTimers(struct ath_hal *ah) +{ + uint32_t val; + + OS_REG_WRITE(ah, AR_TIMER0, 0); /* no beacons */ + val = OS_REG_READ(ah, AR_STA_ID1); + val |= AR_STA_ID1_PWR_SAV; /* XXX */ + /* tell the h/w that the associated AP is not PCF capable */ + OS_REG_WRITE(ah, AR_STA_ID1, + val & ~(AR_STA_ID1_DEFAULT_ANTENNA | AR_STA_ID1_PCF)); + OS_REG_WRITE(ah, AR_BEACON, AR_BEACON_PERIOD); +} + +/* + * Set all the beacon related bits on the h/w for stations + * i.e. initializes the corresponding h/w timers; + * also tells the h/w whether to anticipate PCF beacons + */ +void +ar5211SetStaBeaconTimers(struct ath_hal *ah, const HAL_BEACON_STATE *bs) +{ + struct ath_hal_5211 *ahp = AH5211(ah); + + HALDEBUG(ah, HAL_DEBUG_BEACON, "%s: setting beacon timers\n", __func__); + + HALASSERT(bs->bs_intval != 0); + /* if the AP will do PCF */ + if (bs->bs_cfpmaxduration != 0) { + /* tell the h/w that the associated AP is PCF capable */ + OS_REG_WRITE(ah, AR_STA_ID1, + OS_REG_READ(ah, AR_STA_ID1) | AR_STA_ID1_PCF); + + /* set CFP_PERIOD(1.024ms) register */ + OS_REG_WRITE(ah, AR_CFP_PERIOD, bs->bs_cfpperiod); + + /* set CFP_DUR(1.024ms) register to max cfp duration */ + OS_REG_WRITE(ah, AR_CFP_DUR, bs->bs_cfpmaxduration); + + /* set TIMER2(128us) to anticipated time of next CFP */ + OS_REG_WRITE(ah, AR_TIMER2, bs->bs_cfpnext << 3); + } else { + /* tell the h/w that the associated AP is not PCF capable */ + OS_REG_WRITE(ah, AR_STA_ID1, + OS_REG_READ(ah, AR_STA_ID1) &~ AR_STA_ID1_PCF); + } + + /* + * Set TIMER0(1.024ms) to the anticipated time of the next beacon. + */ + OS_REG_WRITE(ah, AR_TIMER0, bs->bs_nexttbtt); + + /* + * Start the beacon timers by setting the BEACON register + * to the beacon interval; also write the tim offset which + * we should know by now. The code, in ar5211WriteAssocid, + * also sets the tim offset once the AID is known which can + * be left as such for now. + */ + OS_REG_WRITE(ah, AR_BEACON, + (OS_REG_READ(ah, AR_BEACON) &~ (AR_BEACON_PERIOD|AR_BEACON_TIM)) + | SM(bs->bs_intval, AR_BEACON_PERIOD) + | SM(bs->bs_timoffset ? bs->bs_timoffset + 4 : 0, AR_BEACON_TIM) + ); + + /* + * Configure the BMISS interrupt. Note that we + * assume the caller blocks interrupts while enabling + * the threshold. + */ + HALASSERT(bs->bs_bmissthreshold <= MS(0xffffffff, AR_RSSI_THR_BM_THR)); + ahp->ah_rssiThr = (ahp->ah_rssiThr &~ AR_RSSI_THR_BM_THR) + | SM(bs->bs_bmissthreshold, AR_RSSI_THR_BM_THR); + OS_REG_WRITE(ah, AR_RSSI_THR, ahp->ah_rssiThr); + + /* + * Set the sleep duration in 1/8 TU's. + */ +#define SLEEP_SLOP 3 + OS_REG_RMW_FIELD(ah, AR_SCR, AR_SCR_SLDUR, + (bs->bs_sleepduration - SLEEP_SLOP) << 3); +#undef SLEEP_SLOP +} +#endif /* AH_SUPPORT_AR5211 */ |
