Add a new SDHCI quirk, SDHCI_QUIRK_DONT_SET_HISPD_BIT. Apparently some

sdhci controllers, such as the one on a Raspberry Pi, mishandle the signal
timing in high speed signaling mode, but run just fine in standard mode
with the bus running at frequencies between 25-50MHz (which shouldn't work).

This is the solution adopted by U-Boot and other OSes (linux and *BSD)
for the timeouts on Raspberry Pi boards with certain SD cards.  Some
research shows that this quirk is also used on a few other boards, so the
fix is a generic quirk instead of being in the RPi-specific driver code.

This change is based on information discovered by Michal Meloun.

0 files changed, 0 insertions, 0 deletions