summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorBert Lange <b.lange@hzdr.de>2011-08-16 23:43:12 +0200
committerBert Lange <b.lange@hzdr.de>2011-08-16 23:43:12 +0200
commitec177759929085f161b9a5c7c82016406d8867cb (patch)
tree1248124f0909a88dfff4059cc33f1556ee3bfcf7
parentbb1b38ce7d74dbf5ff5bb57576011ed825a8330d (diff)
downloadzpu-ec177759929085f161b9a5c7c82016406d8867cb.zip
zpu-ec177759929085f161b9a5c7c82016406d8867cb.tar.gz
beautify indentation
-rw-r--r--zpu/hdl/example/sim_small_fpga_top.vhd308
-rw-r--r--zpu/hdl/example/sim_small_fpga_top_noint.vhd277
-rw-r--r--zpu/hdl/example_medium/sim_fpga_top.vhd339
-rw-r--r--zpu/hdl/zpu4/core/zpu_config.vhd116
-rw-r--r--zpu/hdl/zpu4/src/clocks.vhd418
-rw-r--r--zpu/hdl/zpu4/src/io.vhd191
-rw-r--r--zpu/hdl/zpu4/src/timer.vhd102
-rw-r--r--zpu/hdl/zpu4/src/trace.vhd106
-rw-r--r--zpu/hdl/zpu4/src/txt_util.vhd852
-rw-r--r--zpu/hdl/zpu4/src/zpuio.vhd424
10 files changed, 1482 insertions, 1651 deletions
diff --git a/zpu/hdl/example/sim_small_fpga_top.vhd b/zpu/hdl/example/sim_small_fpga_top.vhd
index 8054489..909ea21 100644
--- a/zpu/hdl/example/sim_small_fpga_top.vhd
+++ b/zpu/hdl/example/sim_small_fpga_top.vhd
@@ -30,178 +30,168 @@
--
-- The views and conclusions contained in the software and documentation
-- are those of the authors and should not be interpreted as representing
--- official policies, either expressed or implied, of the ZPU Project.--------------------------------------------------------------------------------
+-- official policies, either expressed or implied, of the ZPU Project.
+--------------------------------------------------------------------------------
-library IEEE;
-use IEEE.STD_LOGIC_1164.ALL;
+library ieee;
+use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
----- Uncomment the following library declaration if instantiating
----- any Xilinx primitives in this code.
---library UNISIM;
---use UNISIM.VComponents.all;
-
library work;
use work.zpu_config.all;
use work.zpupkg.all;
+
entity fpga_top is
end fpga_top;
-architecture behave of fpga_top is
-
-
-signal clk : std_logic;
-
-signal areset : std_logic := '1';
-
-
-component zpu_io is
- generic (
- log_file: string := "log.txt"
- );
- port(
- clk : in std_logic;
- areset : in std_logic;
- busy : out std_logic;
- writeEnable : in std_logic;
- readEnable : in std_logic;
- write : in std_logic_vector(wordSize-1 downto 0);
- read : out std_logic_vector(wordSize-1 downto 0);
- addr : in std_logic_vector(maxAddrBit downto minAddrBit)
- );
-end component;
-
-
-
-
-
-signal mem_busy : std_logic;
-signal mem_read : std_logic_vector(wordSize-1 downto 0);
-signal mem_write : std_logic_vector(wordSize-1 downto 0);
-signal mem_addr : std_logic_vector(maxAddrBitIncIO downto 0);
-signal mem_writeEnable : std_logic;
-signal mem_readEnable : std_logic;
-signal mem_writeMask: std_logic_vector(wordBytes-1 downto 0);
-
-signal enable : std_logic;
-
-signal dram_mem_busy : std_logic;
-signal dram_mem_read : std_logic_vector(wordSize-1 downto 0);
-signal dram_mem_write : std_logic_vector(wordSize-1 downto 0);
-signal dram_mem_writeEnable : std_logic;
-signal dram_mem_readEnable : std_logic;
-signal dram_mem_writeMask: std_logic_vector(wordBytes-1 downto 0);
-
-
-signal io_busy : std_logic;
-
-signal io_mem_read : std_logic_vector(wordSize-1 downto 0);
-signal io_mem_writeEnable : std_logic;
-signal io_mem_readEnable : std_logic;
-
-
-signal dram_ready : std_logic;
-signal io_ready : std_logic;
-signal io_reading : std_logic;
-signal interruptcounter : unsigned(15 downto 0);
-signal interrupt : std_logic;
+architecture behave of fpga_top is
-signal break : std_logic;
+ signal clk : std_logic;
+
+ signal areset : std_logic := '1';
+
+
+ component zpu_io is
+ generic (
+ log_file: string := "log.txt"
+ );
+ port (
+ clk : in std_logic;
+ areset : in std_logic;
+ busy : out std_logic;
+ writeEnable : in std_logic;
+ readEnable : in std_logic;
+ write : in std_logic_vector(wordSize-1 downto 0);
+ read : out std_logic_vector(wordSize-1 downto 0);
+ addr : in std_logic_vector(maxAddrBit downto minAddrBit)
+ );
+ end component;
+
+
+ signal mem_busy : std_logic;
+ signal mem_read : std_logic_vector(wordSize-1 downto 0);
+ signal mem_write : std_logic_vector(wordSize-1 downto 0);
+ signal mem_addr : std_logic_vector(maxAddrBitIncIO downto 0);
+ signal mem_writeEnable : std_logic;
+ signal mem_readEnable : std_logic;
+ signal mem_writeMask : std_logic_vector(wordBytes-1 downto 0);
+
+ signal enable : std_logic;
+
+ signal dram_mem_busy : std_logic;
+ signal dram_mem_read : std_logic_vector(wordSize-1 downto 0);
+ signal dram_mem_write : std_logic_vector(wordSize-1 downto 0);
+ signal dram_mem_writeEnable : std_logic;
+ signal dram_mem_readEnable : std_logic;
+ signal dram_mem_writeMask : std_logic_vector(wordBytes-1 downto 0);
+
+ signal io_busy : std_logic;
+
+ signal io_mem_read : std_logic_vector(wordSize-1 downto 0);
+ signal io_mem_writeEnable : std_logic;
+ signal io_mem_readEnable : std_logic;
+
+ signal dram_ready : std_logic;
+ signal io_ready : std_logic;
+ signal io_reading : std_logic;
+ signal interruptcounter : unsigned(15 downto 0);
+ signal interrupt : std_logic;
+
+ signal break : std_logic;
begin
- zpu: zpu_core port map (
- clk => clk ,
- reset => areset,
- enable => enable,
- in_mem_busy => mem_busy,
- mem_read => mem_read,
- mem_write => mem_write,
- out_mem_addr => mem_addr,
- out_mem_writeEnable => mem_writeEnable,
- out_mem_readEnable => mem_readEnable,
- mem_writeMask => mem_writeMask,
- interrupt => interrupt,
- break => break);
-
-
- ioMap: zpu_io port map (
- clk => clk,
- areset => areset,
- busy => io_busy,
- writeEnable => io_mem_writeEnable,
- readEnable => io_mem_readEnable,
- write => mem_write,
- read => io_mem_read,
- addr => mem_addr(maxAddrBit downto minAddrBit)
- );
-
- dram_mem_writeEnable <= mem_writeEnable and not mem_addr(ioBit);
- dram_mem_readEnable <= mem_readEnable and not mem_addr(ioBit);
- io_mem_writeEnable <= mem_writeEnable and mem_addr(ioBit);
- io_mem_readEnable <= mem_readEnable and mem_addr(ioBit);
- mem_busy <= io_busy;
-
-
-
- -- Memory reads either come from IO or DRAM. We need to pick the right one.
- memorycontrol:
- process(dram_mem_read, dram_ready, io_ready, io_mem_read)
- begin
- mem_read <= (others => 'U');
- if dram_ready='1' then
- mem_read <= dram_mem_read;
- end if;
-
- if io_ready='1' then
- mem_read <= (others => '0');
- mem_read <= io_mem_read;
- end if;
- end process;
-
-
-
- io_ready <= (io_reading or io_mem_readEnable) and not io_busy;
-
- memoryControlSync:
- process(clk, areset)
- begin
- if areset = '1' then
- enable <= '0';
- io_reading <= '0';
- dram_ready <= '0';
-
- interruptcounter <= to_unsigned(0, 16);
- interrupt <= '0';
-
- elsif (clk'event and clk = '1') then
- enable <= '1';
- io_reading <= io_busy or io_mem_readEnable;
- dram_ready<=dram_mem_readEnable;
-
- -- keep interrupt signal high for 16 cycles
- interruptcounter <= interruptcounter + 1;
- if (interruptcounter < 16) then
- report "Interrupt asserted!" severity note;
- interrupt <='1';
- else
- interrupt <='0';
- end if;
- end if;
- end process;
-
- -- wiggle the clock @ 100MHz
- clock : PROCESS
- begin
- clk <= '0';
- wait for 5 ns;
- clk <= '1';
- wait for 5 ns;
- areset <= '0';
- end PROCESS clock;
-
-
-end behave;
+ zpu: zpu_core
+ port map (
+ clk => clk,
+ reset => areset,
+ enable => enable,
+ in_mem_busy => mem_busy,
+ mem_read => mem_read,
+ mem_write => mem_write,
+ out_mem_addr => mem_addr,
+ out_mem_writeEnable => mem_writeEnable,
+ out_mem_readEnable => mem_readEnable,
+ mem_writeMask => mem_writeMask,
+ interrupt => interrupt,
+ break => break
+ );
+
+
+ ioMap: zpu_io
+ port map (
+ clk => clk,
+ areset => areset,
+ busy => io_busy,
+ writeEnable => io_mem_writeEnable,
+ readEnable => io_mem_readEnable,
+ write => mem_write,
+ read => io_mem_read,
+ addr => mem_addr(maxAddrBit downto minAddrBit)
+ );
+
+ dram_mem_writeEnable <= mem_writeEnable and not mem_addr(ioBit);
+ dram_mem_readEnable <= mem_readEnable and not mem_addr(ioBit);
+ io_mem_writeEnable <= mem_writeEnable and mem_addr(ioBit);
+ io_mem_readEnable <= mem_readEnable and mem_addr(ioBit);
+ mem_busy <= io_busy;
+
+
+ -- Memory reads either come from IO or DRAM. We need to pick the right one.
+ memorycontrol: process(dram_mem_read, dram_ready, io_ready, io_mem_read)
+ begin
+ mem_read <= (others => 'U');
+ if dram_ready='1' then
+ mem_read <= dram_mem_read;
+ end if;
+
+ if io_ready='1' then
+ mem_read <= (others => '0');
+ mem_read <= io_mem_read;
+ end if;
+ end process;
+
+
+ io_ready <= (io_reading or io_mem_readEnable) and not io_busy;
+
+ memoryControlSync: process(clk, areset)
+ begin
+ if areset = '1' then
+ enable <= '0';
+ io_reading <= '0';
+ dram_ready <= '0';
+
+ interruptcounter <= to_unsigned(0, 16);
+ interrupt <= '0';
+
+ elsif rising_edge(clk) then
+ enable <= '1';
+ io_reading <= io_busy or io_mem_readEnable;
+ dram_ready <= dram_mem_readEnable;
+
+ -- keep interrupt signal high for 16 cycles
+ interruptcounter <= interruptcounter + 1;
+ if (interruptcounter < 16) then
+ report "Interrupt asserted!" severity note;
+ interrupt <='1';
+ else
+ interrupt <='0';
+ end if;
+ end if;
+ end process;
+
+ -- wiggle the clock @ 100MHz
+ clock: process
+ begin
+ clk <= '0';
+ wait for 5 ns;
+ clk <= '1';
+ wait for 5 ns;
+ areset <= '0';
+ end process clock;
+
+
+end architecture behave;
diff --git a/zpu/hdl/example/sim_small_fpga_top_noint.vhd b/zpu/hdl/example/sim_small_fpga_top_noint.vhd
index 1a83131..23b92cc 100644
--- a/zpu/hdl/example/sim_small_fpga_top_noint.vhd
+++ b/zpu/hdl/example/sim_small_fpga_top_noint.vhd
@@ -32,162 +32,153 @@
-- are those of the authors and should not be interpreted as representing
-- official policies, either expressed or implied, of the ZPU Project.
-library IEEE;
-use IEEE.STD_LOGIC_1164.ALL;
+library ieee;
+use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
----- Uncomment the following library declaration if instantiating
----- any Xilinx primitives in this code.
---library UNISIM;
---use UNISIM.VComponents.all;
-
library work;
use work.zpu_config.all;
use work.zpupkg.all;
+
entity fpga_top is
end fpga_top;
-architecture behave of fpga_top is
-
-
-signal clk : std_logic;
-
-signal areset : std_logic := '1';
-
-
-component zpu_io is
- generic (
- log_file: string := "log.txt"
- );
- port(
- clk : in std_logic;
- areset : in std_logic;
- busy : out std_logic;
- writeEnable : in std_logic;
- readEnable : in std_logic;
- write : in std_logic_vector(wordSize-1 downto 0);
- read : out std_logic_vector(wordSize-1 downto 0);
- addr : in std_logic_vector(maxAddrBit downto minAddrBit)
- );
-end component;
-
-
+architecture behave of fpga_top is
-signal mem_busy : std_logic;
-signal mem_read : std_logic_vector(wordSize-1 downto 0);
-signal mem_write : std_logic_vector(wordSize-1 downto 0);
-signal mem_addr : std_logic_vector(maxAddrBitIncIO downto 0);
-signal mem_writeEnable : std_logic;
-signal mem_readEnable : std_logic;
-signal mem_writeMask: std_logic_vector(wordBytes-1 downto 0);
-
-signal enable : std_logic;
-
-signal dram_mem_busy : std_logic;
-signal dram_mem_read : std_logic_vector(wordSize-1 downto 0);
-signal dram_mem_write : std_logic_vector(wordSize-1 downto 0);
-signal dram_mem_writeEnable : std_logic;
-signal dram_mem_readEnable : std_logic;
-signal dram_mem_writeMask: std_logic_vector(wordBytes-1 downto 0);
-
-
-signal io_busy : std_logic;
-
-signal io_mem_read : std_logic_vector(wordSize-1 downto 0);
-signal io_mem_writeEnable : std_logic;
-signal io_mem_readEnable : std_logic;
-
-
-signal dram_ready : std_logic;
-signal io_ready : std_logic;
-signal io_reading : std_logic;
-
-
+ signal clk : std_logic;
+
+ signal areset : std_logic := '1';
+
+
+ component zpu_io is
+ generic (
+ log_file: string := "log.txt"
+ );
+ port (
+ clk : in std_logic;
+ areset : in std_logic;
+ busy : out std_logic;
+ writeEnable : in std_logic;
+ readEnable : in std_logic;
+ write : in std_logic_vector(wordSize-1 downto 0);
+ read : out std_logic_vector(wordSize-1 downto 0);
+ addr : in std_logic_vector(maxAddrBit downto minAddrBit)
+ );
+ end component;
+
+
+ signal mem_busy : std_logic;
+ signal mem_read : std_logic_vector(wordSize-1 downto 0);
+ signal mem_write : std_logic_vector(wordSize-1 downto 0);
+ signal mem_addr : std_logic_vector(maxAddrBitIncIO downto 0);
+ signal mem_writeEnable : std_logic;
+ signal mem_readEnable : std_logic;
+ signal mem_writeMask : std_logic_vector(wordBytes-1 downto 0);
+
+ signal enable : std_logic;
+
+ signal dram_mem_busy : std_logic;
+ signal dram_mem_read : std_logic_vector(wordSize-1 downto 0);
+ signal dram_mem_write : std_logic_vector(wordSize-1 downto 0);
+ signal dram_mem_writeEnable : std_logic;
+ signal dram_mem_readEnable : std_logic;
+ signal dram_mem_writeMask : std_logic_vector(wordBytes-1 downto 0);
+
+ signal io_busy : std_logic;
+
+ signal io_mem_read : std_logic_vector(wordSize-1 downto 0);
+ signal io_mem_writeEnable : std_logic;
+ signal io_mem_readEnable : std_logic;
+
+ signal dram_ready : std_logic;
+ signal io_ready : std_logic;
+ signal io_reading : std_logic;
+
+ signal break : std_logic;
-signal break : std_logic;
begin
- zpu: zpu_core port map (
- clk => clk ,
- reset => areset,
- enable => enable,
- in_mem_busy => mem_busy,
- mem_read => mem_read,
- mem_write => mem_write,
- out_mem_addr => mem_addr,
- out_mem_writeEnable => mem_writeEnable,
- out_mem_readEnable => mem_readEnable,
- mem_writeMask => mem_writeMask,
- interrupt => '0',
- break => break);
-
-
- ioMap: zpu_io port map (
- clk => clk,
- areset => areset,
- busy => io_busy,
- writeEnable => io_mem_writeEnable,
- readEnable => io_mem_readEnable,
- write => mem_write,
- read => io_mem_read,
- addr => mem_addr(maxAddrBit downto minAddrBit)
- );
-
- dram_mem_writeEnable <= mem_writeEnable and not mem_addr(ioBit);
- dram_mem_readEnable <= mem_readEnable and not mem_addr(ioBit);
- io_mem_writeEnable <= mem_writeEnable and mem_addr(ioBit);
- io_mem_readEnable <= mem_readEnable and mem_addr(ioBit);
- mem_busy <= io_busy;
-
-
-
- -- Memory reads either come from IO or DRAM. We need to pick the right one.
- memorycontrol:
- process(dram_mem_read, dram_ready, io_ready, io_mem_read)
- begin
- mem_read <= (others => 'U');
- if dram_ready='1' then
- mem_read <= dram_mem_read;
- end if;
-
- if io_ready='1' then
- mem_read <= (others => '0');
- mem_read <= io_mem_read;
- end if;
- end process;
-
-
-
- io_ready <= (io_reading or io_mem_readEnable) and not io_busy;
-
- memoryControlSync:
- process(clk, areset)
- begin
- if areset = '1' then
- enable <= '0';
- io_reading <= '0';
- dram_ready <= '0';
-
- elsif (clk'event and clk = '1') then
- enable <= '1';
- io_reading <= io_busy or io_mem_readEnable;
- dram_ready<=dram_mem_readEnable;
- end if;
- end process;
-
- -- wiggle the clock @ 100MHz
- clock : PROCESS
- begin
- clk <= '0';
- wait for 5 ns;
- clk <= '1';
- wait for 5 ns;
- areset <= '0';
- end PROCESS clock;
-
-
-end behave;
+ zpu: zpu_core
+ port map (
+ clk => clk,
+ reset => areset,
+ enable => enable,
+ in_mem_busy => mem_busy,
+ mem_read => mem_read,
+ mem_write => mem_write,
+ out_mem_addr => mem_addr,
+ out_mem_writeEnable => mem_writeEnable,
+ out_mem_readEnable => mem_readEnable,
+ mem_writeMask => mem_writeMask,
+ interrupt => '0',
+ break => break
+ );
+
+
+ ioMap: zpu_io
+ port map (
+ clk => clk,
+ areset => areset,
+ busy => io_busy,
+ writeEnable => io_mem_writeEnable,
+ readEnable => io_mem_readEnable,
+ write => mem_write,
+ read => io_mem_read,
+ addr => mem_addr(maxAddrBit downto minAddrBit)
+ );
+
+ dram_mem_writeEnable <= mem_writeEnable and not mem_addr(ioBit);
+ dram_mem_readEnable <= mem_readEnable and not mem_addr(ioBit);
+ io_mem_writeEnable <= mem_writeEnable and mem_addr(ioBit);
+ io_mem_readEnable <= mem_readEnable and mem_addr(ioBit);
+ mem_busy <= io_busy;
+
+
+ -- Memory reads either come from IO or DRAM. We need to pick the right one.
+ memorycontrol: process(dram_mem_read, dram_ready, io_ready, io_mem_read)
+ begin
+ mem_read <= (others => 'U');
+ if dram_ready='1' then
+ mem_read <= dram_mem_read;
+ end if;
+
+ if io_ready='1' then
+ mem_read <= (others => '0');
+ mem_read <= io_mem_read;
+ end if;
+ end process;
+
+
+
+ io_ready <= (io_reading or io_mem_readEnable) and not io_busy;
+
+ memoryControlSync: process(clk, areset)
+ begin
+ if areset = '1' then
+ enable <= '0';
+ io_reading <= '0';
+ dram_ready <= '0';
+
+ elsif rising_edge(clk) then
+ enable <= '1';
+ io_reading <= io_busy or io_mem_readEnable;
+ dram_ready <= dram_mem_readEnable;
+ end if;
+ end process;
+
+ -- wiggle the clock @ 100MHz
+ clock: process
+ begin
+ clk <= '0';
+ wait for 5 ns;
+ clk <= '1';
+ wait for 5 ns;
+ areset <= '0';
+ end process clock;
+
+
+end architecture behave;
diff --git a/zpu/hdl/example_medium/sim_fpga_top.vhd b/zpu/hdl/example_medium/sim_fpga_top.vhd
index a0819de..962caad 100644
--- a/zpu/hdl/example_medium/sim_fpga_top.vhd
+++ b/zpu/hdl/example_medium/sim_fpga_top.vhd
@@ -1,33 +1,46 @@
--------------------------------------------------------------------------------
--- Company:
--- Engineer:
+-- ZPU
--
--- Create Date: 20:15:31 04/14/05
--- Design Name:
--- Module Name: fpga_top - behave
--- Project Name:
--- Target Device:
--- Tool versions:
--- Description:
---
--- Dependencies:
+-- Copyright 2004-2008 oharboe - Øyvind Harboe - oyvind.harboe@zylin.com
+--
+-- The FreeBSD license
+--
+-- Redistribution and use in source and binary forms, with or without
+-- modification, are permitted provided that the following conditions
+-- are met:
--
--- Revision:
--- Revision 0.01 - File Created
--- Additional Comments:
+-- 1. Redistributions of source code must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above
+-- copyright notice, this list of conditions and the following
+-- disclaimer in the documentation and/or other materials
+-- provided with the distribution.
--
+-- THIS SOFTWARE IS PROVIDED BY THE ZPU PROJECT ``AS IS'' AND ANY
+-- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+-- THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+-- PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+-- ZPU PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+-- INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+-- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+-- OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+-- HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+-- STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+-- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+-- ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+--
+-- The views and conclusions contained in the software and documentation
+-- are those of the authors and should not be interpreted as representing
+-- official policies, either expressed or implied, of the ZPU Project.
--------------------------------------------------------------------------------
-library IEEE;
-use IEEE.STD_LOGIC_1164.ALL;
----- Uncomment the following library declaration if instantiating
----- any Xilinx primitives in this code.
---library UNISIM;
---use UNISIM.VComponents.all;
+library ieee;
+use ieee.std_logic_1164.all;
library work;
use work.zpu_config.all;
+
entity fpga_top is
end fpga_top;
@@ -36,150 +49,146 @@ use work.zpupkg.all;
architecture behave of fpga_top is
-signal clk : std_logic;
-
-signal areset : std_logic := '1';
-
-
-component zpu_io is
- generic (
- log_file: string := "log.txt"
- );
- port(
- clk : in std_logic;
- areset : in std_logic;
- busy : out std_logic;
- writeEnable : in std_logic;
- readEnable : in std_logic;
- write : in std_logic_vector(wordSize-1 downto 0);
- read : out std_logic_vector(wordSize-1 downto 0);
- addr : in std_logic_vector(maxAddrBit downto minAddrBit)
- );
-end component;
-
-
-
-
-
-signal mem_busy : std_logic;
-signal mem_read : std_logic_vector(wordSize-1 downto 0);
-signal mem_write : std_logic_vector(wordSize-1 downto 0);
-signal mem_addr : std_logic_vector(maxAddrBitIncIO downto 0);
-signal mem_writeEnable : std_logic;
-signal mem_readEnable : std_logic;
-signal mem_writeMask: std_logic_vector(wordBytes-1 downto 0);
-
-signal enable : std_logic;
-
-signal dram_mem_busy : std_logic;
-signal dram_mem_read : std_logic_vector(wordSize-1 downto 0);
-signal dram_mem_write : std_logic_vector(wordSize-1 downto 0);
-signal dram_mem_writeEnable : std_logic;
-signal dram_mem_readEnable : std_logic;
-signal dram_mem_writeMask: std_logic_vector(wordBytes-1 downto 0);
-
-
-signal io_busy : std_logic;
-
-signal io_mem_read : std_logic_vector(wordSize-1 downto 0);
-signal io_mem_writeEnable : std_logic;
-signal io_mem_readEnable : std_logic;
-
-
-signal dram_ready : std_logic;
-signal io_ready : std_logic;
-signal io_reading : std_logic;
-
-
-signal break : std_logic;
+ signal clk : std_logic;
+
+ signal areset : std_logic := '1';
+
+
+ component zpu_io is
+ generic (
+ log_file: string := "log.txt"
+ );
+ port (
+ clk : in std_logic;
+ areset : in std_logic;
+ busy : out std_logic;
+ writeEnable : in std_logic;
+ readEnable : in std_logic;
+ write : in std_logic_vector(wordSize-1 downto 0);
+ read : out std_logic_vector(wordSize-1 downto 0);
+ addr : in std_logic_vector(maxAddrBit downto minAddrBit)
+ );
+ end component;
+
+
+ signal mem_busy : std_logic;
+ signal mem_read : std_logic_vector(wordSize-1 downto 0);
+ signal mem_write : std_logic_vector(wordSize-1 downto 0);
+ signal mem_addr : std_logic_vector(maxAddrBitIncIO downto 0);
+ signal mem_writeEnable : std_logic;
+ signal mem_readEnable : std_logic;
+ signal mem_writeMask : std_logic_vector(wordBytes-1 downto 0);
+
+ signal enable : std_logic;
+
+ signal dram_mem_busy : std_logic;
+ signal dram_mem_read : std_logic_vector(wordSize-1 downto 0);
+ signal dram_mem_write : std_logic_vector(wordSize-1 downto 0);
+ signal dram_mem_writeEnable : std_logic;
+ signal dram_mem_readEnable : std_logic;
+ signal dram_mem_writeMask : std_logic_vector(wordBytes-1 downto 0);
+
+ signal io_busy : std_logic;
+
+ signal io_mem_read : std_logic_vector(wordSize-1 downto 0);
+ signal io_mem_writeEnable : std_logic;
+ signal io_mem_readEnable : std_logic;
+
+ signal dram_ready : std_logic;
+ signal io_ready : std_logic;
+ signal io_reading : std_logic;
+
+ signal break : std_logic;
begin
- zpu: zpu_core port map (
- clk => clk ,
- reset => areset,
- enable => enable,
- in_mem_busy => mem_busy,
- mem_read => mem_read,
- mem_write => mem_write,
- out_mem_addr => mem_addr,
- out_mem_writeEnable => mem_writeEnable,
- out_mem_readEnable => mem_readEnable,
- mem_writeMask => mem_writeMask,
- interrupt => '0',
- break => break);
-
- dram_imp: dram port map (
- clk => clk ,
- areset => areset,
- mem_busy => dram_mem_busy,
- mem_read => dram_mem_read,
- mem_write => mem_write,
- mem_addr => mem_addr(maxAddrBit downto 0),
- mem_writeEnable => dram_mem_writeEnable,
- mem_readEnable => dram_mem_readEnable,
- mem_writeMask => mem_writeMask);
-
-
- ioMap: zpu_io port map (
- clk => clk,
- areset => areset,
- busy => io_busy,
- writeEnable => io_mem_writeEnable,
- readEnable => io_mem_readEnable,
- write => mem_write(wordSize-1 downto 0),
- read => io_mem_read,
- addr => mem_addr(maxAddrBit downto minAddrBit)
- );
-
- dram_mem_writeEnable <= mem_writeEnable and not mem_addr(ioBit);
- dram_mem_readEnable <= mem_readEnable and not mem_addr(ioBit);
- io_mem_writeEnable <= mem_writeEnable and mem_addr(ioBit);
- io_mem_readEnable <= mem_readEnable and mem_addr(ioBit);
- mem_busy <= io_busy or dram_mem_busy or io_busy;
-
-
-
- -- Memory reads either come from IO or DRAM. We need to pick the right one.
- memorycontrol:
- process(dram_mem_read, dram_ready, io_ready, io_mem_read)
- begin
- mem_read <= (others => 'U');
- if dram_ready='1' then
- mem_read <= dram_mem_read;
- end if;
-
- if io_ready='1' then
- mem_read <= io_mem_read;
- end if;
- end process;
-
-
- io_ready <= (io_reading or io_mem_readEnable) and not io_busy;
-
- memoryControlSync:
- process(clk, areset)
- begin
- if areset = '1' then
- enable <= '0';
- io_reading <= '0';
- dram_ready <= '0';
- elsif (clk'event and clk = '1') then
- enable <= '1';
- io_reading <= io_busy or io_mem_readEnable;
- dram_ready<=dram_mem_readEnable;
-
- end if;
- end process;
-
- -- wiggle the clock @ 100MHz
- clock : PROCESS
- begin
- clk <= '0';
- wait for 5 ns;
- clk <= '1';
- wait for 5 ns;
- areset <= '0';
- end PROCESS clock;
-
-
-end behave;
+
+ zpu: zpu_core
+ port map (
+ clk => clk,
+ reset => areset,
+ enable => enable,
+ in_mem_busy => mem_busy,
+ mem_read => mem_read,
+ mem_write => mem_write,
+ out_mem_addr => mem_addr,
+ out_mem_writeEnable => mem_writeEnable,
+ out_mem_readEnable => mem_readEnable,
+ mem_writeMask => mem_writeMask,
+ interrupt => '0',
+ break => break
+ );
+
+ dram_imp: dram
+ port map (
+ clk => clk ,
+ areset => areset,
+ mem_busy => dram_mem_busy,
+ mem_read => dram_mem_read,
+ mem_write => mem_write,
+ mem_addr => mem_addr(maxAddrBit downto 0),
+ mem_writeEnable => dram_mem_writeEnable,
+ mem_readEnable => dram_mem_readEnable,
+ mem_writeMask => mem_writeMask
+ );
+
+
+ ioMap: zpu_io
+ port map (
+ clk => clk,
+ areset => areset,
+ busy => io_busy,
+ writeEnable => io_mem_writeEnable,
+ readEnable => io_mem_readEnable,
+ write => mem_write(wordSize-1 downto 0),
+ read => io_mem_read,
+ addr => mem_addr(maxAddrBit downto minAddrBit)
+ );
+
+ dram_mem_writeEnable <= mem_writeEnable and not mem_addr(ioBit);
+ dram_mem_readEnable <= mem_readEnable and not mem_addr(ioBit);
+ io_mem_writeEnable <= mem_writeEnable and mem_addr(ioBit);
+ io_mem_readEnable <= mem_readEnable and mem_addr(ioBit);
+ mem_busy <= io_busy or dram_mem_busy or io_busy;
+
+
+ -- Memory reads either come from IO or DRAM. We need to pick the right one.
+ memorycontrol: process(dram_mem_read, dram_ready, io_ready, io_mem_read)
+ begin
+ mem_read <= (others => 'U');
+ if dram_ready='1' then
+ mem_read <= dram_mem_read;
+ end if;
+
+ if io_ready='1' then
+ mem_read <= io_mem_read;
+ end if;
+ end process;
+
+
+ io_ready <= (io_reading or io_mem_readEnable) and not io_busy;
+
+ memoryControlSync: process(clk, areset)
+ begin
+ if areset = '1' then
+ enable <= '0';
+ io_reading <= '0';
+ dram_ready <= '0';
+ elsif rising_edge(clk) then
+ enable <= '1';
+ io_reading <= io_busy or io_mem_readEnable;
+ dram_ready <= dram_mem_readEnable;
+ end if;
+ end process;
+
+ -- wiggle the clock @ 100MHz
+ clock : process
+ begin
+ clk <= '0';
+ wait for 5 ns;
+ clk <= '1';
+ wait for 5 ns;
+ areset <= '0';
+ end process clock;
+
+
+end architecture behave;
diff --git a/zpu/hdl/zpu4/core/zpu_config.vhd b/zpu/hdl/zpu4/core/zpu_config.vhd
index b29c561..c678044 100644
--- a/zpu/hdl/zpu4/core/zpu_config.vhd
+++ b/zpu/hdl/zpu4/core/zpu_config.vhd
@@ -1,58 +1,58 @@
--- ZPU
---
--- Copyright 2004-2008 oharboe - Øyvind Harboe - oyvind.harboe@zylin.com
---
--- The FreeBSD license
---
--- Redistribution and use in source and binary forms, with or without
--- modification, are permitted provided that the following conditions
--- are met:
---
--- 1. Redistributions of source code must retain the above copyright
--- notice, this list of conditions and the following disclaimer.
--- 2. Redistributions in binary form must reproduce the above
--- copyright notice, this list of conditions and the following
--- disclaimer in the documentation and/or other materials
--- provided with the distribution.
---
--- THIS SOFTWARE IS PROVIDED BY THE ZPU PROJECT ``AS IS'' AND ANY
--- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
--- THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
--- PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
--- ZPU PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
--- INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
--- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
--- OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
--- HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
--- STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
--- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
--- ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
---
--- The views and conclusions contained in the software and documentation
--- are those of the authors and should not be interpreted as representing
--- official policies, either expressed or implied, of the ZPU Project.
-
-
-library ieee;
-use ieee.std_logic_1164.all;
-use ieee.numeric_std.all;
-
-package zpu_config is
-
- -- generate trace output or not.
- constant Generate_Trace : boolean := false;
- constant wordPower : integer := 5;
- -- during simulation, set this to '0' to get matching trace.txt
- constant DontCareValue : std_logic := 'X';
- -- Clock frequency in MHz.
- constant ZPU_Frequency : std_logic_vector(7 downto 0) := x"64";
- -- This is the msb address bit. bytes=2^(maxAddrBitIncIO+1)
- constant maxAddrBitIncIO : integer := 15;
- constant maxAddrBitBRAM : integer := 14;
-
- -- start byte address of stack.
- -- point to top of RAM - 2*words
- constant spStart : std_logic_vector(maxAddrBitIncIO downto 0) :=
- std_logic_vector(to_unsigned((2**(maxAddrBitBRAM+1))-8, maxAddrBitIncIO+1));
-
-end zpu_config;
+-- ZPU
+--
+-- Copyright 2004-2008 oharboe - Øyvind Harboe - oyvind.harboe@zylin.com
+--
+-- The FreeBSD license
+--
+-- Redistribution and use in source and binary forms, with or without
+-- modification, are permitted provided that the following conditions
+-- are met:
+--
+-- 1. Redistributions of source code must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above
+-- copyright notice, this list of conditions and the following
+-- disclaimer in the documentation and/or other materials
+-- provided with the distribution.
+--
+-- THIS SOFTWARE IS PROVIDED BY THE ZPU PROJECT ``AS IS'' AND ANY
+-- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+-- THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+-- PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+-- ZPU PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+-- INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+-- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+-- OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+-- HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+-- STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+-- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+-- ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+--
+-- The views and conclusions contained in the software and documentation
+-- are those of the authors and should not be interpreted as representing
+-- official policies, either expressed or implied, of the ZPU Project.
+
+
+library ieee;
+use ieee.std_logic_1164.all;
+use ieee.numeric_std.all;
+
+package zpu_config is
+
+ -- generate trace output or not.
+ constant Generate_Trace : boolean := false;
+ constant wordPower : integer := 5;
+ -- during simulation, set this to '0' to get matching trace.txt
+ constant DontCareValue : std_logic := 'X';
+ -- Clock frequency in MHz.
+ constant ZPU_Frequency : std_logic_vector(7 downto 0) := x"64";
+ -- This is the msb address bit. bytes=2^(maxAddrBitIncIO+1)
+ constant maxAddrBitIncIO : integer := 15;
+ constant maxAddrBitBRAM : integer := 14;
+
+ -- start byte address of stack.
+ -- point to top of RAM - 2*words
+ constant spStart : std_logic_vector(maxAddrBitIncIO downto 0) :=
+ std_logic_vector(to_unsigned((2**(maxAddrBitBRAM+1))-8, maxAddrBitIncIO+1));
+
+end zpu_config;
diff --git a/zpu/hdl/zpu4/src/clocks.vhd b/zpu/hdl/zpu4/src/clocks.vhd
index 704d790..67433be 100644
--- a/zpu/hdl/zpu4/src/clocks.vhd
+++ b/zpu/hdl/zpu4/src/clocks.vhd
@@ -1,246 +1,198 @@
-library IEEE;
-use IEEE.STD_LOGIC_1164.ALL;
-use IEEE.STD_LOGIC_UNSIGNED.ALL;
+library ieee;
+use ieee.std_logic_1164.all;
+
+library unisim;
+use unisim.vcomponents.ibufg;
+use unisim.vcomponents.srl16;
+use unisim.vcomponents.dcm;
+use unisim.vcomponents.bufg;
-library UNISIM;
-use UNISIM.vcomponents.all;
entity clocks is
- port ( areset : in std_logic;
- cpu_clk_p : in std_logic;
- sdr_clk_fb_p : in std_logic;
- cpu_clk : out std_logic;
- cpu_clk_2x : out std_logic;
- cpu_clk_4x : out std_logic;
- ddr_in_clk : out std_logic;
- ddr_in_clk_2x : out std_logic;
- locked : out std_logic_vector(2 downto 0));
-end clocks;
+ port (
+ areset : in std_logic;
+ cpu_clk_p : in std_logic;
+ sdr_clk_fb_p : in std_logic;
+ cpu_clk : out std_logic;
+ cpu_clk_2x : out std_logic;
+ cpu_clk_4x : out std_logic;
+ ddr_in_clk : out std_logic;
+ ddr_in_clk_2x : out std_logic;
+ locked : out std_logic_vector(2 downto 0)
+ );
+end entity clocks;
architecture behave of clocks is
-signal low : std_logic;
+ signal low : std_logic;
+ --
+ signal cpu_clk_in : std_logic;
+ signal sdr_clk_fb_in : std_logic;
+ --
+ signal dcm_cpu1 : std_logic;
+ signal dcm_cpu2 : std_logic;
+ signal dcm_cpu2_dum : std_logic;
+ signal dcm_cpu4 : std_logic;
+ signal dcm_ddr2 : std_logic;
+ signal dcm_ddr2_2x : std_logic;
+ --
+ signal cpu_clk_int : std_logic;
+ signal cpu_clk_2x_int : std_logic;
+ signal cpu_clk_2x_dum_int : std_logic;
+ signal cpu_clk_4x_int : std_logic;
+ signal ddr_in_clk_int : std_logic;
+ signal ddr_in_clk_2x_int : std_logic;
+ --
+ signal dcm1_locked_del : std_logic;
+ signal dcm2_locked_del : std_logic;
+ signal dcm2_reset : std_logic;
+ signal dcm3_reset : std_logic;
+ --
+ signal locked_int : std_logic_vector(2 downto 0);
+ signal del_addr : std_logic_vector(3 downto 0);
+
+begin
-signal cpu_clk_in : std_logic;
-signal sdr_clk_fb_in : std_logic;
+ low <= '0';
+ del_addr <= "1111";
+ --
+ cpu_clk <= cpu_clk_int;
+ cpu_clk_2x <= cpu_clk_2x_int;
+ cpu_clk_4x <= cpu_clk_4x_int;
+ ddr_in_clk <= ddr_in_clk_int;
+ ddr_in_clk_2x <= ddr_in_clk_2x_int;
+ locked <= locked_int;
-signal dcm_cpu1 : std_logic;
-signal dcm_cpu2 : std_logic;
-signal dcm_cpu2_dum : std_logic;
-signal dcm_cpu4 : std_logic;
-signal dcm_ddr2 : std_logic;
-signal dcm_ddr2_2x : std_logic;
-signal cpu_clk_int : std_logic;
-signal cpu_clk_2x_int : std_logic;
-signal cpu_clk_2x_dum_int : std_logic;
-signal cpu_clk_4x_int : std_logic;
-signal ddr_in_clk_int : std_logic;
-signal ddr_in_clk_2x_int : std_logic;
+ cpu_ibufg : ibufg
+ port map (
+ O => cpu_clk_in,
+ I => cpu_clk_p
+ );
-signal dcm1_locked_del : std_logic;
-signal dcm2_locked_del : std_logic;
-signal dcm2_reset : std_logic;
-signal dcm3_reset : std_logic;
+ sdr_fb_ibufg : ibufg
+ port map (
+ O => sdr_clk_fb_in,
+ I => sdr_clk_fb_p
+ );
-signal locked_int : std_logic_vector(2 downto 0);
-signal del_addr : std_logic_vector(3 downto 0);
+ dcm2_rst : srl16
+ generic map (
+ init => x"0000"
+ )
+ port map (
+ Q => dcm1_locked_del,
+ A0 => del_addr(0),
+ A1 => del_addr(1),
+ A2 => del_addr(2),
+ A3 => del_addr(3),
+ CLK => cpu_clk_int,
+ D => locked_int(0)
+ );
-begin
+ dcm2_reset <= not(dcm1_locked_del);
+
+ dcm3_rst : srl16
+ generic map (
+ init => x"0000"
+ )
+ port map (
+ Q => dcm2_locked_del,
+ A0 => del_addr(0),
+ A1 => del_addr(1),
+ A2 => del_addr(2),
+ A3 => del_addr(3),
+ CLK => cpu_clk_int,
+ D => locked_int(1)
+ );
+
+ dcm3_reset <= not(dcm2_locked_del);
+
+ cpu1_dcm :
+ dcm generic map (
+ clkin_period => 15.625, -- Specify period of input clock
+ factory_jf => X"8080" -- FACTORY JF Values
+ )
+ port map (
+ clk0 => dcm_cpu1, -- 0 degree DCM CLK ouptput
+ clk2x => dcm_cpu2, -- 2X DCM CLK output
+ locked => locked_int(0), -- DCM LOCK status output
+ clkfb => cpu_clk_int, -- DCM clock feedback
+ clkin => cpu_clk_in, -- Clock input (from IBUFG, BUFG or DCM)
+ psclk => low, -- Dynamic phase adjust clock input
+ psen => low, -- Dynamic phase adjust enable input
+ psincdec => low, -- Dynamic phase adjust increment/decrement
+ rst => areset -- DCM asynchronous reset input
+ );
+
+ cpu2_dcm : dcm
+ generic map (
+ clkin_period => 7.8125, -- Specify period of input clock
+ factory_jf => X"8080" -- FACTORY JF Values
+ )
+ port map (
+ clk0 => dcm_cpu2_dum, -- 0 degree DCM CLK ouptput
+ clk2x => dcm_cpu4, -- 2X DCM CLK output
+ locked => locked_int(1), -- DCM LOCK status output
+ clkfb => cpu_clk_2x_dum_int, -- DCM clock feedback
+ clkin => cpu_clk_2x_int, -- Clock input (from IBUFG, BUFG or DCM)
+ psclk => low, -- Dynamic phase adjust clock input
+ psen => low, -- Dynamic phase adjust enable input
+ psincdec => low, -- Dynamic phase adjust increment/decrement
+ rst => dcm2_reset -- DCM asynchronous reset input
+ );
+
+ ddr_read_dcm : dcm
+ generic map (
+ clkin_period => 7.8125, -- Specify period of input clock
+ clkout_phase_shift => "FIXED", -- Specify phase shift of NONE, FIXED or VARIABLE
+ factory_jf => X"8080", -- FACTORY JF Values
+ phase_shift => 103 -- Amount of fixed phase shift from -255 to 255
+ )
+ port map (
+ clk0 => dcm_ddr2, -- 0 degree DCM CLK ouptput
+ clk2x => dcm_ddr2_2x, -- 2X DCM CLK output
+ locked => locked_int(2), -- DCM LOCK status output
+ clkfb => ddr_in_clk_int, -- DCM clock feedback
+ clkin => sdr_clk_fb_in, -- Clock input (from IBUFG, BUFG or DCM)
+ psclk => low, -- Dynamic phase adjust clock input
+ psen => low, -- Dynamic phase adjust enable input
+ psincdec => low, -- Dynamic phase adjust increment/decrement
+ rst => dcm3_reset -- DCM asynchronous reset input
+ );
+
+ cpu1 : bufg
+ port map (
+ I => dcm_cpu1,
+ O => cpu_clk_int
+ );
+
+ cpu2 : bufg
+ port map (
+ I => dcm_cpu2,
+ O => cpu_clk_2x_int
+ );
+
+ cpu2_dum : bufg
+ port map (
+ i => dcm_cpu2_dum,
+ o => cpu_clk_2x_dum_int
+ );
+
+ cpu4 : bufg
+ port map (
+ i => dcm_cpu4,
+ o => cpu_clk_4x_int
+ );
+
+ ddr_clk : bufg port map (
+ i => dcm_ddr2,
+ o => ddr_in_clk_int
+ );
+
+ ddr_clk_2x : bufg port map (
+ i => dcm_ddr2_2x,
+ o => ddr_in_clk_2x_int
+ );
- low <= '0';
- del_addr <= "1111";
-
- cpu_clk <= cpu_clk_int;
- cpu_clk_2x <= cpu_clk_2x_int;
- cpu_clk_4x <= cpu_clk_4x_int;
- ddr_in_clk <= ddr_in_clk_int;
- ddr_in_clk_2x <= ddr_in_clk_2x_int;
- locked <= locked_int;
-
-
- CPU_IBUFG:
- IBUFG port map (
- O => cpu_clk_in,
- I => cpu_clk_p);
-
- SDR_FB_IBUFG:
- IBUFG port map (
- O => sdr_clk_fb_in,
- I => sdr_clk_fb_p);
-
- dcm2_rst:
- SRL16 generic map (
- INIT => X"0000")
- port map (
- Q => dcm1_locked_del,
- A0 => del_addr(0),
- A1 => del_addr(1),
- A2 => del_addr(2),
- A3 => del_addr(3),
- CLK => cpu_clk_int,
- D => locked_int(0));
-
- dcm2_reset <= not(dcm1_locked_del);
-
- dcm3_rst:
- SRL16 generic map (
- INIT => X"0000")
- port map (
- Q => dcm2_locked_del,
- A0 => del_addr(0),
- A1 => del_addr(1),
- A2 => del_addr(2),
- A3 => del_addr(3),
- CLK => cpu_clk_int,
- D => locked_int(1));
-
- dcm3_reset <= not(dcm2_locked_del);
-
- cpu1_dcm:
- DCM generic map (
- CLKDV_DIVIDE => 2.0, -- Divide by: 1.5,2.0,2.5,3.0,3.5,4.0,4.5,5.0,5.5,6.0,6.5
- -- 7.0,7.5,8.0,9.0,10.0,11.0,12.0,13.0,14.0,15.0 or 16.0
- CLKFX_DIVIDE => 1, -- Can be any interger from 1 to 32
- CLKFX_MULTIPLY => 4, -- Can be any integer from 1 to 32
- CLKIN_DIVIDE_BY_2 => FALSE, -- TRUE/FALSE to enable CLKIN divide by two feature
- CLKIN_PERIOD => 15.625, -- Specify period of input clock
- CLKOUT_PHASE_SHIFT => "NONE", -- Specify phase shift of NONE, FIXED or VARIABLE
- CLK_FEEDBACK => "1X", -- Specify clock feedback of NONE, 1X or 2X
- DESKEW_ADJUST => "SYSTEM_SYNCHRONOUS", -- SOURCE_SYNCHRONOUS, SYSTEM_SYNCHRONOUS or
- -- an integer from 0 to 15
- DFS_FREQUENCY_MODE => "LOW", -- HIGH or LOW frequency mode for frequency synthesis
- DLL_FREQUENCY_MODE => "LOW", -- HIGH or LOW frequency mode for DLL
- DUTY_CYCLE_CORRECTION => TRUE, -- Duty cycle correction, TRUE or FALSE
- FACTORY_JF => X"8080", -- FACTORY JF Values
- PHASE_SHIFT => 0, -- Amount of fixed phase shift from -255 to 255
- STARTUP_WAIT => FALSE) -- Delay configuration DONE until DCM LOCK, TRUE/FALSE
- port map (
- CLK0 => dcm_cpu1, -- 0 degree DCM CLK ouptput
- CLK180 => open, -- 180 degree DCM CLK output
- CLK270 => open, -- 270 degree DCM CLK output
- CLK2X => dcm_cpu2, -- 2X DCM CLK output
- CLK2X180 => open, -- 2X, 180 degree DCM CLK out
- CLK90 => open, -- 90 degree DCM CLK output
- CLKDV => open, -- Divided DCM CLK out (CLKDV_DIVIDE)
- CLKFX => open, -- DCM CLK synthesis out (M/D)
- CLKFX180 => open, -- 180 degree CLK synthesis out
- LOCKED => locked_int(0), -- DCM LOCK status output
- PSDONE => open, -- Dynamic phase adjust done output
- STATUS => open, -- 8-bit DCM status bits output
- CLKFB => cpu_clk_int, -- DCM clock feedback
- CLKIN => cpu_clk_in, -- Clock input (from IBUFG, BUFG or DCM)
- PSCLK => low, -- Dynamic phase adjust clock input
- PSEN => low, -- Dynamic phase adjust enable input
- PSINCDEC => low, -- Dynamic phase adjust increment/decrement
- RST => areset); -- DCM asynchronous reset input
-
- cpu2_dcm:
- DCM generic map (
- CLKDV_DIVIDE => 2.0, -- Divide by: 1.5,2.0,2.5,3.0,3.5,4.0,4.5,5.0,5.5,6.0,6.5
- -- 7.0,7.5,8.0,9.0,10.0,11.0,12.0,13.0,14.0,15.0 or 16.0
- CLKFX_DIVIDE => 1, -- Can be any interger from 1 to 32
- CLKFX_MULTIPLY => 4, -- Can be any integer from 1 to 32
- CLKIN_DIVIDE_BY_2 => FALSE, -- TRUE/FALSE to enable CLKIN divide by two feature
- CLKIN_PERIOD => 7.8125, -- Specify period of input clock
- CLKOUT_PHASE_SHIFT => "NONE", -- Specify phase shift of NONE, FIXED or VARIABLE
- CLK_FEEDBACK => "1X", -- Specify clock feedback of NONE, 1X or 2X
- DESKEW_ADJUST => "SYSTEM_SYNCHRONOUS", -- SOURCE_SYNCHRONOUS, SYSTEM_SYNCHRONOUS or
- -- an integer from 0 to 15
- DFS_FREQUENCY_MODE => "LOW", -- HIGH or LOW frequency mode for frequency synthesis
- DLL_FREQUENCY_MODE => "LOW", -- HIGH or LOW frequency mode for DLL
- DUTY_CYCLE_CORRECTION => TRUE, -- Duty cycle correction, TRUE or FALSE
- FACTORY_JF => X"8080", -- FACTORY JF Values
- PHASE_SHIFT => 0, -- Amount of fixed phase shift from -255 to 255
- STARTUP_WAIT => FALSE) -- Delay configuration DONE until DCM LOCK, TRUE/FALSE
- port map (
- CLK0 => dcm_cpu2_dum, -- 0 degree DCM CLK ouptput
- CLK180 => open, -- 180 degree DCM CLK output
- CLK270 => open, -- 270 degree DCM CLK output
- CLK2X => dcm_cpu4, -- 2X DCM CLK output
- CLK2X180 => open, -- 2X, 180 degree DCM CLK out
- CLK90 => open, -- 90 degree DCM CLK output
- CLKDV => open, -- Divided DCM CLK out (CLKDV_DIVIDE)
- CLKFX => open, -- DCM CLK synthesis out (M/D)
- CLKFX180 => open, -- 180 degree CLK synthesis out
- LOCKED => locked_int(1), -- DCM LOCK status output
- PSDONE => open, -- Dynamic phase adjust done output
- STATUS => open, -- 8-bit DCM status bits output
- CLKFB => cpu_clk_2x_dum_int, -- DCM clock feedback
- CLKIN => cpu_clk_2x_int, -- Clock input (from IBUFG, BUFG or DCM)
- PSCLK => low, -- Dynamic phase adjust clock input
- PSEN => low, -- Dynamic phase adjust enable input
- PSINCDEC => low, -- Dynamic phase adjust increment/decrement
- RST => dcm2_reset); -- DCM asynchronous reset input
-
- ddr_read_dcm:
- DCM generic map (
- CLKDV_DIVIDE => 2.0, -- Divide by: 1.5,2.0,2.5,3.0,3.5,4.0,4.5,5.0,5.5,6.0,6.5
- -- 7.0,7.5,8.0,9.0,10.0,11.0,12.0,13.0,14.0,15.0 or 16.0
- CLKFX_DIVIDE => 1, -- Can be any interger from 1 to 32
- CLKFX_MULTIPLY => 4, -- Can be any integer from 1 to 32
- CLKIN_DIVIDE_BY_2 => FALSE, -- TRUE/FALSE to enable CLKIN divide by two feature
- CLKIN_PERIOD => 7.8125, -- Specify period of input clock
- CLKOUT_PHASE_SHIFT => "FIXED", -- Specify phase shift of NONE, FIXED or VARIABLE
--- CLKOUT_PHASE_SHIFT => "NONE", -- Specify phase shift of NONE, FIXED or VARIABLE
- CLK_FEEDBACK => "1X", -- Specify clock feedback of NONE, 1X or 2X
- DESKEW_ADJUST => "SYSTEM_SYNCHRONOUS", -- SOURCE_SYNCHRONOUS, SYSTEM_SYNCHRONOUS or
- -- an integer from 0 to 15
- DFS_FREQUENCY_MODE => "LOW", -- HIGH or LOW frequency mode for frequency synthesis
- DLL_FREQUENCY_MODE => "LOW", -- HIGH or LOW frequency mode for DLL
- DUTY_CYCLE_CORRECTION => TRUE, -- Duty cycle correction, TRUE or FALSE
- FACTORY_JF => X"8080", -- FACTORY JF Values
- PHASE_SHIFT => 103, -- Amount of fixed phase shift from -255 to 255
--- PHASE_SHIFT => 0, -- Amount of fixed phase shift from -255 to 255
- STARTUP_WAIT => FALSE) -- Delay configuration DONE until DCM LOCK, TRUE/FALSE
- port map (
- CLK0 => dcm_ddr2, -- 0 degree DCM CLK ouptput
- CLK180 => open, -- 180 degree DCM CLK output
- CLK270 => open, -- 270 degree DCM CLK output
- CLK2X => dcm_ddr2_2x, -- 2X DCM CLK output
- CLK2X180 => open, -- 2X, 180 degree DCM CLK out
- CLK90 => open, -- 90 degree DCM CLK output
- CLKDV => open, -- Divided DCM CLK out (CLKDV_DIVIDE)
- CLKFX => open, -- DCM CLK synthesis out (M/D)
- CLKFX180 => open, -- 180 degree CLK synthesis out
- LOCKED => locked_int(2), -- DCM LOCK status output
- PSDONE => open, -- Dynamic phase adjust done output
- STATUS => open, -- 8-bit DCM status bits output
- CLKFB => ddr_in_clk_int, -- DCM clock feedback
- CLKIN => sdr_clk_fb_in, -- Clock input (from IBUFG, BUFG or DCM)
- PSCLK => low, -- Dynamic phase adjust clock input
- PSEN => low, -- Dynamic phase adjust enable input
- PSINCDEC => low, -- Dynamic phase adjust increment/decrement
- RST => dcm3_reset); -- DCM asynchronous reset input
-
- cpu1:
- BUFG port map (
- I => dcm_cpu1,
- O => cpu_clk_int);
-
- cpu2:
- BUFG port map (
- I => dcm_cpu2,
- O => cpu_clk_2x_int);
-
- cpu2_dum:
- BUFG port map (
- I => dcm_cpu2_dum,
- O => cpu_clk_2x_dum_int);
-
- cpu4:
- BUFG port map (
- I => dcm_cpu4,
- O => cpu_clk_4x_int);
-
- ddr_clk:
- BUFG port map (
- I => dcm_ddr2,
- O => ddr_in_clk_int);
-
- ddr_clk_2x:
- BUFG port map (
- I => dcm_ddr2_2x,
- O => ddr_in_clk_2x_int);
-
-end behave; \ No newline at end of file
+end architecture behave;
diff --git a/zpu/hdl/zpu4/src/io.vhd b/zpu/hdl/zpu4/src/io.vhd
index f05b29b..56c7fb5 100644
--- a/zpu/hdl/zpu4/src/io.vhd
+++ b/zpu/hdl/zpu4/src/io.vhd
@@ -8,117 +8,112 @@ library work;
use work.zpu_config.all;
use work.zpupkg.all;
use work.txt_util.all;
-
-entity zpu_io is
- generic (
- log_file: string := "log.txt"
- );
- port(
- clk : in std_logic;
- areset : in std_logic;
- busy : out std_logic;
- writeEnable : in std_logic;
- readEnable : in std_logic;
- write : in std_logic_vector(wordSize-1 downto 0);
- read : out std_logic_vector(wordSize-1 downto 0);
- addr : in std_logic_vector(maxAddrBit downto minAddrBit)
- );
-end zpu_io;
-
-
-architecture behave of zpu_io is
+entity zpu_io is
+ generic (
+ log_file : string := "log.txt"
+ );
+ port(
+ clk : in std_logic;
+ areset : in std_logic;
+ busy : out std_logic;
+ writeEnable : in std_logic;
+ readEnable : in std_logic;
+ write : in std_logic_vector(wordSize-1 downto 0);
+ read : out std_logic_vector(wordSize-1 downto 0);
+ addr : in std_logic_vector(maxAddrBit downto minAddrBit)
+ );
+end entity zpu_io;
-signal timer_read : std_logic_vector(7 downto 0);
---signal timer_write : std_logic_vector(7 downto 0);
-signal timer_we : std_logic;
-signal serving : std_logic;
+architecture behave of zpu_io is
-file l_file : TEXT open write_mode is log_file;
-constant lowAddrBits: std_logic_vector(minAddrBit-1 downto 0) := (others=>'0');
-constant tx_full: std_logic := '0';
-constant rx_empty: std_logic := '1';
+ signal timer_read : std_logic_vector(7 downto 0);
+ signal timer_we : std_logic;
+ --
+ signal serving : std_logic;
+ --
+ file l_file : text open write_mode is log_file;
+ constant lowAddrBits : std_logic_vector(minAddrBit-1 downto 0) := (others => '0');
+ constant tx_full : std_logic := '0';
+ constant rx_empty : std_logic := '1';
begin
-
- timerinst: timer port map (
- clk => clk,
- areset => areset,
- we => timer_we,
- din => write(7 downto 0),
- adr => addr(4 downto 2),
- dout => timer_read);
-
- busy <= writeEnable or readEnable;
- timer_we <= writeEnable and addr(12);
-
- process(areset, clk)
- variable taddr : std_logic_vector(maxAddrBit downto 0);
- -- pragma translate_off
- variable line_out : line := new string'("");
- variable char : character;
- -- pragma translate_on
- begin
- taddr := (others => '0');
- taddr(maxAddrBit downto minAddrBit) := addr;
-
- if (areset = '1') then
--- timer_we <= '0';
- elsif (clk'event and clk = '1') then
--- timer_we <= '0';
- if writeEnable = '1' then
- -- external interface (fixed address)
- --<JK> extend compare to avoid waring messages
- if ("1" & addr & lowAddrBits)=x"80a000c" then
- -- Write to UART
- report "Write to UART[0]" & " :0x" & hstr(write);
+
+ timerinst : timer
+ port map (
+ clk => clk,
+ areset => areset,
+ we => timer_we,
+ din => write(7 downto 0),
+ adr => addr(4 downto 2),
+ dout => timer_read
+ );
+
+ busy <= writeEnable or readEnable;
+ timer_we <= writeEnable and addr(12);
+
+ process(areset, clk)
+ variable taddr : std_logic_vector(maxAddrBit downto 0);
+ -- pragma translate_off
+ variable line_out : line := new string'("");
+ variable char : character;
+ -- pragma translate_on
+ begin
+ taddr := (others => '0');
+ taddr(maxAddrBit downto minAddrBit) := addr;
+
+ if (areset = '1') then
+ elsif (clk'event and clk = '1') then
+ if writeEnable = '1' then
+ -- external interface (fixed address)
+ --<JK> extend compare to avoid waring messages
+ if ("1" & addr & lowAddrBits) = x"80a000c" then
+ -- Write to UART
+ report "Write to UART[0]" & " :0x" & hstr(write);
-- pragma translate_off
- char := character'val(to_integer(unsigned(write)));
+ char := character'val(to_integer(unsigned(write)));
if char = lf then
- std.textio.writeline( l_file, line_out);
+ std.textio.writeline(l_file, line_out);
else
- std.textio.write( line_out, char);
+ std.textio.write(line_out, char);
end if;
-- pragma translate_on
- elsif addr(12)='1' then
- report "Write to TIMER" & " :0x" & hstr(write);
--- report "xxx" severity failure;
--- timer_we <= '1';
+ elsif addr(12) = '1' then
+ report "Write to TIMER" & " :0x" & hstr(write);
- else
-
+ else
+
report "Illegal IO write @" & "0x" & hstr(taddr) severity warning;
- end if;
-
- end if;
- read <= (others => '0');
- if (readEnable = '1') then
- --<JK> extend compare to avoid waring messages
- if ("1" & addr & lowAddrBits)=x"80a000c" then
- report "Read UART[0]";
- read(8) <= not tx_full; -- output fifo not full
- read(9) <= not rx_empty; -- receiver not empty
- elsif ("1" & addr & lowAddrBits)=x"80a0010" then
- report "Read UART[1]";
- read(8) <= not rx_empty; -- receiver not empty
- read(7 downto 0) <= (others => '0');
- elsif addr(12)='1' then
- report "Read TIMER";
- read(7 downto 0) <= timer_read;
- elsif addr(11)='1' then
- report "Read ZPU Freq";
- read(7 downto 0) <= ZPU_Frequency;
- else
- report "Illegal IO read @" & "0x" & hstr(taddr) severity warning;
- end if;
- end if;
- end if;
- end process;
-
-
-end behave;
-
+ end if;
+
+ end if;
+ read <= (others => '0');
+ if (readEnable = '1') then
+ --<JK> extend compare to avoid waring messages
+ if ("1" & addr & lowAddrBits) = x"80a000c" then
+ report "Read UART[0]";
+ read(8) <= not tx_full; -- output fifo not full
+ read(9) <= not rx_empty; -- receiver not empty
+ elsif ("1" & addr & lowAddrBits) = x"80a0010" then
+ report "Read UART[1]";
+ read(8) <= not rx_empty; -- receiver not empty
+ read(7 downto 0) <= (others => '0');
+ elsif addr(12) = '1' then
+ report "Read TIMER";
+ read(7 downto 0) <= timer_read;
+ elsif addr(11) = '1' then
+ report "Read ZPU Freq";
+ read(7 downto 0) <= ZPU_Frequency;
+ else
+ report "Illegal IO read @" & "0x" & hstr(taddr) severity warning;
+ end if;
+ end if;
+ end if;
+ end process;
+
+end architecture behave;
+
diff --git a/zpu/hdl/zpu4/src/timer.vhd b/zpu/hdl/zpu4/src/timer.vhd
index c60c172..d6d9358 100644
--- a/zpu/hdl/zpu4/src/timer.vhd
+++ b/zpu/hdl/zpu4/src/timer.vhd
@@ -1,61 +1,61 @@
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
-
+
entity timer is
- port(
- clk : in std_logic;
- areset : in std_logic;
- we : in std_logic;
- din : in std_logic_vector(7 downto 0);
- adr : in std_logic_vector(2 downto 0);
- dout : out std_logic_vector(7 downto 0));
-end timer;
-
-
-architecture behave of timer is
+ port(
+ clk : in std_logic;
+ areset : in std_logic;
+ we : in std_logic;
+ din : in std_logic_vector(7 downto 0);
+ adr : in std_logic_vector(2 downto 0);
+ dout : out std_logic_vector(7 downto 0)
+ );
+end entity timer;
-signal sample : std_logic;
-signal reset : std_logic;
+architecture behave of timer is
-signal cnt : unsigned(63 downto 0);
-signal cnt_smp : std_logic_vector(63 downto 0);
+ signal sample : std_logic;
+ signal reset : std_logic;
+ --
+ signal cnt : unsigned(63 downto 0);
+ signal cnt_smp : std_logic_vector(63 downto 0);
begin
- reset <= '1' when (we = '1' and din(0) = '1') else '0';
- sample <= '1' when (we = '1' and din(1) = '1') else '0';
-
- process(clk, areset) -- Carry generation
- begin
- if areset = '1' then
- cnt <= (others => '0');
- cnt_smp <= (others => '0');
- elsif (clk'event and clk = '1') then
- cnt <= cnt + 1;
- if sample = '1' then
--- report "sampling" severity failure;
- cnt_smp <= std_logic_vector(cnt);
- end if;
- end if;
- end process;
-
-
- process(cnt_smp, adr)
- begin
- case adr is
- when "000" => dout <= cnt_smp(7 downto 0);
- when "001" => dout <= cnt_smp(15 downto 8);
- when "010" => dout <= cnt_smp(23 downto 16);
- when "011" => dout <= cnt_smp(31 downto 24);
- when "100" => dout <= cnt_smp(39 downto 32);
- when "101" => dout <= cnt_smp(47 downto 40);
- when "110" => dout <= cnt_smp(55 downto 48);
- when others => dout <= cnt_smp(63 downto 56);
- end case;
- end process;
-
-
-end behave;
-
+ reset <= '1' when (we = '1' and din(0) = '1') else '0';
+ sample <= '1' when (we = '1' and din(1) = '1') else '0';
+
+ process(clk, areset) -- Carry generation
+ begin
+ if areset = '1' then
+ cnt <= (others => '0');
+ cnt_smp <= (others => '0');
+ elsif rising_edge(clk) then
+ cnt <= cnt + 1;
+ if sample = '1' then
+-- report "sampling" severity failure;
+ cnt_smp <= std_logic_vector(cnt);
+ end if;
+ end if;
+ end process;
+
+
+ process(cnt_smp, adr)
+ begin
+ case adr is
+ when "000" => dout <= cnt_smp(7 downto 0);
+ when "001" => dout <= cnt_smp(15 downto 8);
+ when "010" => dout <= cnt_smp(23 downto 16);
+ when "011" => dout <= cnt_smp(31 downto 24);
+ when "100" => dout <= cnt_smp(39 downto 32);
+ when "101" => dout <= cnt_smp(47 downto 40);
+ when "110" => dout <= cnt_smp(55 downto 48);
+ when others => dout <= cnt_smp(63 downto 56);
+ end case;
+ end process;
+
+
+end architecture behave;
+
diff --git a/zpu/hdl/zpu4/src/trace.vhd b/zpu/hdl/zpu4/src/trace.vhd
index 00ac3a8..01678c8 100644
--- a/zpu/hdl/zpu4/src/trace.vhd
+++ b/zpu/hdl/zpu4/src/trace.vhd
@@ -42,76 +42,66 @@ library work;
use work.zpu_config.all;
use work.zpupkg.all;
use work.txt_util.all;
-
-
-entity trace is
- generic (
- log_file: string := "trace.txt"
- );
- port(
- clk : in std_logic;
- begin_inst : in std_logic;
- pc : in std_logic_vector(maxAddrBitIncIO downto 0);
- opcode : in std_logic_vector(7 downto 0);
- sp : in std_logic_vector(maxAddrBitIncIO downto 2);
- memA : in std_logic_vector(wordSize-1 downto 0);
- memB : in std_logic_vector(wordSize-1 downto 0);
- busy : in std_logic;
- intSp : in std_logic_vector(stack_bits-1 downto 0)
- );
-end trace;
-
-
-architecture behave of trace is
-
-
-file l_file : TEXT open write_mode is log_file;
-begin
+entity trace is
+ generic (
+ log_file : string := "trace.txt"
+ );
+ port(
+ clk : in std_logic;
+ begin_inst : in std_logic;
+ pc : in std_logic_vector(maxAddrBitIncIO downto 0);
+ opcode : in std_logic_vector(7 downto 0);
+ sp : in std_logic_vector(maxAddrBitIncIO downto 2);
+ memA : in std_logic_vector(wordSize-1 downto 0);
+ memB : in std_logic_vector(wordSize-1 downto 0);
+ busy : in std_logic;
+ intSp : in std_logic_vector(stack_bits-1 downto 0)
+ );
+end entity trace;
--- write data and control information to a file
+architecture behave of trace is
+
+ file l_file : text open write_mode is log_file;
-receive_data: process
+begin
-variable l: line;
-variable t : std_logic_vector(wordSize-1 downto 0);
-variable t2 : std_logic_vector(maxAddrBitIncIO downto 0);
-variable counter : unsigned(63 downto 0);
-
-
-
-begin
+ -- write data and control information to a file
+ receive_data : process
+ variable l : line;
+ variable t : std_logic_vector(wordSize-1 downto 0);
+ variable t2 : std_logic_vector(maxAddrBitIncIO downto 0);
+ variable counter : unsigned(63 downto 0);
+ begin
- t:= (others => '0');
- t2:= (others => '0');
+ t := (others => '0');
+ t2 := (others => '0');
-counter := (others => '0');
- -- print header for the logfile
- print(l_file, "#pc,opcode,sp,top_of_stack ");
- print(l_file, "#----------");
- print(l_file, " ");
+ counter := (others => '0');
- wait until clk = '1';
- wait until clk = '0';
+ -- print header for the logfile
+ print(l_file, "#pc,opcode,sp,top_of_stack ");
+ print(l_file, "#----------");
+ print(l_file, " ");
- while true loop
+ wait until clk = '1';
+ wait until clk = '0';
- counter := counter + 1;
- if begin_inst = '1' then
- t(maxAddrBitIncIO downto 2):=sp;
- t2:=pc;
- print(l_file, "0x" & hstr(t2) & " 0x" & hstr(opcode) & " 0x" & hstr(t) & " 0x" & hstr(memA) & " 0x" & hstr(memB) & " 0x" & hstr(intSp) & " 0x" & hstr(std_logic_vector(counter)));
- end if;
-
- wait until clk = '0';
-
- end loop;
+ while true loop
- end process receive_data;
+ counter := counter + 1;
+ if begin_inst = '1' then
+ t(maxAddrBitIncIO downto 2) := sp;
+ t2 := pc;
+ print(l_file, "0x" & hstr(t2) & " 0x" & hstr(opcode) & " 0x" & hstr(t) & " 0x" & hstr(memA) & " 0x" & hstr(memB) & " 0x" & hstr(intSp) & " 0x" & hstr(std_logic_vector(counter)));
+ end if;
+ wait until clk = '0';
+
+ end loop;
+ end process receive_data;
+end architecture behave;
-end behave;
-
diff --git a/zpu/hdl/zpu4/src/txt_util.vhd b/zpu/hdl/zpu4/src/txt_util.vhd
index 6432294..4dca901 100644
--- a/zpu/hdl/zpu4/src/txt_util.vhd
+++ b/zpu/hdl/zpu4/src/txt_util.vhd
@@ -36,586 +36,504 @@ library ieee;
use ieee.std_logic_1164.all;
use std.textio.all;
-library work;
package txt_util is
-- prints a message to the screen
- procedure print(text: string);
+ procedure print(text : string);
-- prints the message when active
-- useful for debug switches
- procedure print(active: boolean; text: string);
+ procedure print(active : boolean; text : string);
-- converts std_logic into a character
- function chr(sl: std_logic) return character;
+ function chr(sl : std_logic) return character;
-- converts std_logic into a string (1 to 1)
- function str(sl: std_logic) return string;
+ function str(sl : std_logic) return string;
-- converts std_logic_vector into a string (binary base)
- function str(slv: std_logic_vector) return string;
+ function str(slv : std_logic_vector) return string;
-- converts boolean into a string
- function str(b: boolean) return string;
+ function str(b : boolean) return string;
-- converts an integer into a single character
-- (can also be used for hex conversion and other bases)
- function chr(int: integer) return character;
+ function chr(int : integer) return character;
-- converts integer into string using specified base
- function str(int: integer; base: integer) return string;
+ function str(int : integer; base : integer) return string;
-- converts integer to string, using base 10
- function str(int: integer) return string;
+ function str(int : integer) return string;
-- convert std_logic_vector into a string in hex format
- function hstr(slv: std_logic_vector) return string;
+ function hstr(slv : std_logic_vector) return string;
-- functions to manipulate strings
-----------------------------------
-- convert a character to upper case
- function to_upper(c: character) return character;
+ function to_upper(c : character) return character;
-- convert a character to lower case
- function to_lower(c: character) return character;
+ function to_lower(c : character) return character;
-- convert a string to upper case
- function to_upper(s: string) return string;
+ function to_upper(s : string) return string;
-- convert a string to lower case
- function to_lower(s: string) return string;
+ function to_lower(s : string) return string;
+
+
-
-
-- functions to convert strings into other formats
--------------------------------------------------
-
+
-- converts a character into std_logic
- function to_std_logic(c: character) return std_logic;
-
+ function to_std_logic(c : character) return std_logic;
+
-- converts a string into std_logic_vector
- function to_std_logic_vector(s: string) return std_logic_vector;
+ function to_std_logic_vector(s : string) return std_logic_vector;
+
-
-- file I/O
-----------
-
- -- read variable length string from input file
- procedure str_read(file in_file: TEXT;
- res_string: out string);
-
- -- print string to a file and start new line
- procedure print(file out_file: TEXT;
- new_string: in string);
-
- -- print character to a file and start new line
- procedure print(file out_file: TEXT;
- char: in character);
-
-end txt_util;
-
+ -- read variable length string from input file
+ procedure str_read(file in_file : text; res_string : out string);
+ -- print string to a file and start new line
+ procedure print(file out_file : text; new_string : in string);
-package body txt_util is
+ -- print character to a file and start new line
+ procedure print(file out_file : text; char : in character);
+end package txt_util;
- -- prints text to the screen
- procedure print(text: string) is
- variable msg_line: line;
- begin
- write(msg_line, text);
- writeline(output, msg_line);
- end print;
+package body txt_util is
+ -- prints text to the screen
+ procedure print(text : string) is
+ variable msg_line : line;
+ begin
+ write(msg_line, text);
+ writeline(output, msg_line);
+ end procedure print;
- -- prints text to the screen when active
+ -- prints text to the screen when active
+ procedure print(active : boolean; text : string) is
+ begin
+ if active then
+ print(text);
+ end if;
+ end procedure print;
- procedure print(active: boolean; text: string) is
- begin
- if active then
- print(text);
- end if;
- end print;
+ -- converts std_logic into a character
+ function chr(sl : std_logic) return character is
+ variable c : character;
+ begin
+ case sl is
+ when 'U' => c := 'U';
+ when 'X' => c := 'X';
+ when '0' => c := '0';
+ when '1' => c := '1';
+ when 'Z' => c := 'Z';
+ when 'W' => c := 'W';
+ when 'L' => c := 'L';
+ when 'H' => c := 'H';
+ when '-' => c := '-';
+ end case;
+ return c;
+ end function chr;
- -- converts std_logic into a character
- function chr(sl: std_logic) return character is
- variable c: character;
- begin
- case sl is
- when 'U' => c:= 'U';
- when 'X' => c:= 'X';
- when '0' => c:= '0';
- when '1' => c:= '1';
- when 'Z' => c:= 'Z';
- when 'W' => c:= 'W';
- when 'L' => c:= 'L';
- when 'H' => c:= 'H';
- when '-' => c:= '-';
- end case;
- return c;
- end chr;
-
-
-
- -- converts std_logic into a string (1 to 1)
-
- function str(sl: std_logic) return string is
- variable s: string(1 to 1);
+ -- converts std_logic into a string (1 to 1)
+ function str(sl : std_logic) return string is
+ variable s : string(1 to 1);
begin
s(1) := chr(sl);
return s;
- end str;
+ end function str;
+ -- converts std_logic_vector into a string (binary base)
+ -- (this also takes care of the fact that the range of
+ -- a string is natural while a std_logic_vector may
+ -- have an integer range)
+ function str(slv : std_logic_vector) return string is
+ variable result : string (1 to slv'length);
+ variable r : integer;
+ begin
+ r := 1;
+ for i in slv'range loop
+ result(r) := chr(slv(i));
+ r := r + 1;
+ end loop;
+ return result;
+ end function str;
- -- converts std_logic_vector into a string (binary base)
- -- (this also takes care of the fact that the range of
- -- a string is natural while a std_logic_vector may
- -- have an integer range)
-
- function str(slv: std_logic_vector) return string is
- variable result : string (1 to slv'length);
- variable r : integer;
- begin
- r := 1;
- for i in slv'range loop
- result(r) := chr(slv(i));
- r := r + 1;
- end loop;
- return result;
- end str;
-
-
- function str(b: boolean) return string is
+ function str(b : boolean) return string is
+ begin
+ if b then
+ return "true";
+ else
+ return "false";
+ end if;
+ end function str;
+
+
+ -- converts an integer into a character
+ -- for 0 to 9 the obvious mapping is used, higher
+ -- values are mapped to the characters A-Z
+ -- (this is usefull for systems with base > 10)
+ -- (adapted from Steve Vogwell's posting in comp.lang.vhdl)
+ function chr(int : integer) return character is
+ variable c : character;
begin
- if b then
- return "true";
- else
- return "false";
- end if;
- end str;
-
-
- -- converts an integer into a character
- -- for 0 to 9 the obvious mapping is used, higher
- -- values are mapped to the characters A-Z
- -- (this is usefull for systems with base > 10)
- -- (adapted from Steve Vogwell's posting in comp.lang.vhdl)
-
- function chr(int: integer) return character is
- variable c: character;
- begin
case int is
- when 0 => c := '0';
- when 1 => c := '1';
- when 2 => c := '2';
- when 3 => c := '3';
- when 4 => c := '4';
- when 5 => c := '5';
- when 6 => c := '6';
- when 7 => c := '7';
- when 8 => c := '8';
- when 9 => c := '9';
- when 10 => c := 'A';
- when 11 => c := 'B';
- when 12 => c := 'C';
- when 13 => c := 'D';
- when 14 => c := 'E';
- when 15 => c := 'F';
- when 16 => c := 'G';
- when 17 => c := 'H';
- when 18 => c := 'I';
- when 19 => c := 'J';
- when 20 => c := 'K';
- when 21 => c := 'L';
- when 22 => c := 'M';
- when 23 => c := 'N';
- when 24 => c := 'O';
- when 25 => c := 'P';
- when 26 => c := 'Q';
- when 27 => c := 'R';
- when 28 => c := 'S';
- when 29 => c := 'T';
- when 30 => c := 'U';
- when 31 => c := 'V';
- when 32 => c := 'W';
- when 33 => c := 'X';
- when 34 => c := 'Y';
- when 35 => c := 'Z';
- when others => c := '?';
+ when 0 => c := '0';
+ when 1 => c := '1';
+ when 2 => c := '2';
+ when 3 => c := '3';
+ when 4 => c := '4';
+ when 5 => c := '5';
+ when 6 => c := '6';
+ when 7 => c := '7';
+ when 8 => c := '8';
+ when 9 => c := '9';
+ when 10 => c := 'A';
+ when 11 => c := 'B';
+ when 12 => c := 'C';
+ when 13 => c := 'D';
+ when 14 => c := 'E';
+ when 15 => c := 'F';
+ when 16 => c := 'G';
+ when 17 => c := 'H';
+ when 18 => c := 'I';
+ when 19 => c := 'J';
+ when 20 => c := 'K';
+ when 21 => c := 'L';
+ when 22 => c := 'M';
+ when 23 => c := 'N';
+ when 24 => c := 'O';
+ when 25 => c := 'P';
+ when 26 => c := 'Q';
+ when 27 => c := 'R';
+ when 28 => c := 'S';
+ when 29 => c := 'T';
+ when 30 => c := 'U';
+ when 31 => c := 'V';
+ when 32 => c := 'W';
+ when 33 => c := 'X';
+ when 34 => c := 'Y';
+ when 35 => c := 'Z';
+ when others => c := '?';
end case;
return c;
- end chr;
-
-
-
- -- convert integer to string using specified base
- -- (adapted from Steve Vogwell's posting in comp.lang.vhdl)
-
- function str(int: integer; base: integer) return string is
-
- variable temp: string(1 to 10);
- variable num: integer;
- variable abs_int: integer;
- variable len: integer := 1;
- variable power: integer := 1;
-
- begin
+ end function chr;
- -- bug fix for negative numbers
- abs_int := abs(int);
- num := abs_int;
-
- while num >= base loop -- Determine how many
- len := len + 1; -- characters required
- num := num / base; -- to represent the
- end loop ; -- number.
-
- for i in len downto 1 loop -- Convert the number to
- temp(i) := chr(abs_int/power mod base); -- a string starting
- power := power * base; -- with the right hand
- end loop ; -- side.
-
- -- return result and add sign if required
- if int < 0 then
- return '-'& temp(1 to len);
- else
- return temp(1 to len);
- end if;
-
- end str;
-
-
- -- convert integer to string, using base 10
- function str(int: integer) return string is
+ -- convert integer to string using specified base
+ -- (adapted from Steve Vogwell's posting in comp.lang.vhdl)
+ function str(int : integer; base : integer) return string is
+ variable temp : string(1 to 10);
+ variable num : integer;
+ variable abs_int : integer;
+ variable len : integer := 1;
+ variable power : integer := 1;
+ begin
- begin
+ -- bug fix for negative numbers
+ abs_int := abs(int);
- return str(int, 10) ;
+ num := abs_int;
- end str;
+ while num >= base loop -- Determine how many
+ len := len + 1; -- characters required
+ num := num / base; -- to represent the
+ end loop; -- number.
+ for i in len downto 1 loop -- Convert the number to
+ temp(i) := chr(abs_int/power mod base); -- a string starting
+ power := power * base; -- with the right hand
+ end loop; -- side.
+ -- return result and add sign if required
+ if int < 0 then
+ return '-'& temp(1 to len);
+ else
+ return temp(1 to len);
+ end if;
- -- converts a std_logic_vector into a hex string.
- function hstr(slv: std_logic_vector) return string is
- variable hexlen: integer;
- variable longslv : std_logic_vector(67 downto 0) := (others => '0');
- variable hex : string(1 to 16);
- variable fourbit : std_logic_vector(3 downto 0);
- begin
- hexlen := (slv'left+1)/4;
- if (slv'left+1) mod 4 /= 0 then
- hexlen := hexlen + 1;
- end if;
- longslv(slv'left downto 0) := slv;
- for i in (hexlen -1) downto 0 loop
- fourbit := longslv(((i*4)+3) downto (i*4));
- case fourbit is
- when "0000" => hex(hexlen -I) := '0';
- when "0001" => hex(hexlen -I) := '1';
- when "0010" => hex(hexlen -I) := '2';
- when "0011" => hex(hexlen -I) := '3';
- when "0100" => hex(hexlen -I) := '4';
- when "0101" => hex(hexlen -I) := '5';
- when "0110" => hex(hexlen -I) := '6';
- when "0111" => hex(hexlen -I) := '7';
- when "1000" => hex(hexlen -I) := '8';
- when "1001" => hex(hexlen -I) := '9';
- when "1010" => hex(hexlen -I) := 'A';
- when "1011" => hex(hexlen -I) := 'B';
- when "1100" => hex(hexlen -I) := 'C';
- when "1101" => hex(hexlen -I) := 'D';
- when "1110" => hex(hexlen -I) := 'E';
- when "1111" => hex(hexlen -I) := 'F';
- when "ZZZZ" => hex(hexlen -I) := 'z';
- when "UUUU" => hex(hexlen -I) := 'u';
- when "XXXX" => hex(hexlen -I) := 'x';
- when others => hex(hexlen -I) := '?';
- end case;
- end loop;
- return hex(1 to hexlen);
- end hstr;
+ end function str;
+ -- convert integer to string, using base 10
+ function str(int : integer) return string is
+ begin
+ return str(int, 10);
+ end function str;
- -- functions to manipulate strings
- -----------------------------------
+ -- converts a std_logic_vector into a hex string.
+ function hstr(slv : std_logic_vector) return string is
+ variable hexlen : integer;
+ variable longslv : std_logic_vector(67 downto 0) := (others => '0');
+ variable hex : string(1 to 16);
+ variable fourbit : std_logic_vector(3 downto 0);
+ begin
+ hexlen := (slv'left+1)/4;
+ if (slv'left+1) mod 4 /= 0 then
+ hexlen := hexlen + 1;
+ end if;
+ longslv(slv'left downto 0) := slv;
+ for i in (hexlen -1) downto 0 loop
+ fourbit := longslv(((i*4)+3) downto (i*4));
+ case fourbit is
+ when "0000" => hex(hexlen -I) := '0';
+ when "0001" => hex(hexlen -I) := '1';
+ when "0010" => hex(hexlen -I) := '2';
+ when "0011" => hex(hexlen -I) := '3';
+ when "0100" => hex(hexlen -I) := '4';
+ when "0101" => hex(hexlen -I) := '5';
+ when "0110" => hex(hexlen -I) := '6';
+ when "0111" => hex(hexlen -I) := '7';
+ when "1000" => hex(hexlen -I) := '8';
+ when "1001" => hex(hexlen -I) := '9';
+ when "1010" => hex(hexlen -I) := 'A';
+ when "1011" => hex(hexlen -I) := 'B';
+ when "1100" => hex(hexlen -I) := 'C';
+ when "1101" => hex(hexlen -I) := 'D';
+ when "1110" => hex(hexlen -I) := 'E';
+ when "1111" => hex(hexlen -I) := 'F';
+ when "ZZZZ" => hex(hexlen -I) := 'z';
+ when "UUUU" => hex(hexlen -I) := 'u';
+ when "XXXX" => hex(hexlen -I) := 'x';
+ when others => hex(hexlen -I) := '?';
+ end case;
+ end loop;
+ return hex(1 to hexlen);
+ end function hstr;
- -- convert a character to upper case
- function to_upper(c: character) return character is
- variable u: character;
+ -- functions to manipulate strings
+ -----------------------------------
+ -- convert a character to upper case
+ function to_upper(c : character) return character is
+ variable u : character;
begin
+ case c is
+ when 'a' => u := 'A';
+ when 'b' => u := 'B';
+ when 'c' => u := 'C';
+ when 'd' => u := 'D';
+ when 'e' => u := 'E';
+ when 'f' => u := 'F';
+ when 'g' => u := 'G';
+ when 'h' => u := 'H';
+ when 'i' => u := 'I';
+ when 'j' => u := 'J';
+ when 'k' => u := 'K';
+ when 'l' => u := 'L';
+ when 'm' => u := 'M';
+ when 'n' => u := 'N';
+ when 'o' => u := 'O';
+ when 'p' => u := 'P';
+ when 'q' => u := 'Q';
+ when 'r' => u := 'R';
+ when 's' => u := 'S';
+ when 't' => u := 'T';
+ when 'u' => u := 'U';
+ when 'v' => u := 'V';
+ when 'w' => u := 'W';
+ when 'x' => u := 'X';
+ when 'y' => u := 'Y';
+ when 'z' => u := 'Z';
+ when others => u := c;
+ end case;
+ return u;
+ end function to_upper;
- case c is
- when 'a' => u := 'A';
- when 'b' => u := 'B';
- when 'c' => u := 'C';
- when 'd' => u := 'D';
- when 'e' => u := 'E';
- when 'f' => u := 'F';
- when 'g' => u := 'G';
- when 'h' => u := 'H';
- when 'i' => u := 'I';
- when 'j' => u := 'J';
- when 'k' => u := 'K';
- when 'l' => u := 'L';
- when 'm' => u := 'M';
- when 'n' => u := 'N';
- when 'o' => u := 'O';
- when 'p' => u := 'P';
- when 'q' => u := 'Q';
- when 'r' => u := 'R';
- when 's' => u := 'S';
- when 't' => u := 'T';
- when 'u' => u := 'U';
- when 'v' => u := 'V';
- when 'w' => u := 'W';
- when 'x' => u := 'X';
- when 'y' => u := 'Y';
- when 'z' => u := 'Z';
- when others => u := c;
- end case;
-
- return u;
-
- end to_upper;
-
-
- -- convert a character to lower case
-
- function to_lower(c: character) return character is
-
- variable l: character;
+ -- convert a character to lower case
+ function to_lower(c : character) return character is
+ variable l : character;
begin
+ case c is
+ when 'A' => l := 'a';
+ when 'B' => l := 'b';
+ when 'C' => l := 'c';
+ when 'D' => l := 'd';
+ when 'E' => l := 'e';
+ when 'F' => l := 'f';
+ when 'G' => l := 'g';
+ when 'H' => l := 'h';
+ when 'I' => l := 'i';
+ when 'J' => l := 'j';
+ when 'K' => l := 'k';
+ when 'L' => l := 'l';
+ when 'M' => l := 'm';
+ when 'N' => l := 'n';
+ when 'O' => l := 'o';
+ when 'P' => l := 'p';
+ when 'Q' => l := 'q';
+ when 'R' => l := 'r';
+ when 'S' => l := 's';
+ when 'T' => l := 't';
+ when 'U' => l := 'u';
+ when 'V' => l := 'v';
+ when 'W' => l := 'w';
+ when 'X' => l := 'x';
+ when 'Y' => l := 'y';
+ when 'Z' => l := 'z';
+ when others => l := c;
+ end case;
+ return l;
+ end function to_lower;
- case c is
- when 'A' => l := 'a';
- when 'B' => l := 'b';
- when 'C' => l := 'c';
- when 'D' => l := 'd';
- when 'E' => l := 'e';
- when 'F' => l := 'f';
- when 'G' => l := 'g';
- when 'H' => l := 'h';
- when 'I' => l := 'i';
- when 'J' => l := 'j';
- when 'K' => l := 'k';
- when 'L' => l := 'l';
- when 'M' => l := 'm';
- when 'N' => l := 'n';
- when 'O' => l := 'o';
- when 'P' => l := 'p';
- when 'Q' => l := 'q';
- when 'R' => l := 'r';
- when 'S' => l := 's';
- when 'T' => l := 't';
- when 'U' => l := 'u';
- when 'V' => l := 'v';
- when 'W' => l := 'w';
- when 'X' => l := 'x';
- when 'Y' => l := 'y';
- when 'Z' => l := 'z';
- when others => l := c;
- end case;
-
- return l;
-
- end to_lower;
-
-
-
- -- convert a string to upper case
- function to_upper(s: string) return string is
+ -- convert a string to upper case
+ function to_upper(s : string) return string is
+ variable uppercase : string (s'range);
+ begin
- variable uppercase: string (s'range);
+ for i in s'range loop
+ uppercase(i) := to_upper(s(i));
+ end loop;
+ return uppercase;
- begin
+ end function to_upper;
- for i in s'range loop
- uppercase(i):= to_upper(s(i));
- end loop;
- return uppercase;
- end to_upper;
+ -- convert a string to lower case
+ function to_lower(s : string) return string is
+ variable lowercase : string (s'range);
+ begin
+ for i in s'range loop
+ lowercase(i) := to_lower(s(i));
+ end loop;
+ return lowercase;
+ end function to_lower;
- -- convert a string to lower case
+ -- functions to convert strings into other types
+ ------------------------------------------------
- function to_lower(s: string) return string is
+ -- converts a character into a std_logic
+ function to_std_logic(c : character) return std_logic is
+ variable sl : std_logic;
+ begin
+ case c is
+ when 'U' =>
+ sl := 'U';
+ when 'X' =>
+ sl := 'X';
+ when '0' =>
+ sl := '0';
+ when '1' =>
+ sl := '1';
+ when 'Z' =>
+ sl := 'Z';
+ when 'W' =>
+ sl := 'W';
+ when 'L' =>
+ sl := 'L';
+ when 'H' =>
+ sl := 'H';
+ when '-' =>
+ sl := '-';
+ when others =>
+ sl := 'X';
+ end case;
+ return sl;
+ end function to_std_logic;
- variable lowercase: string (s'range);
- begin
+ -- converts a string into std_logic_vector
+ function to_std_logic_vector(s : string) return std_logic_vector is
+ variable slv : std_logic_vector(s'high-s'low downto 0);
+ variable k : integer;
+ begin
+ k := s'high-s'low;
+ for i in s'range loop
+ slv(k) := to_std_logic(s(i));
+ k := k - 1;
+ end loop;
+ return slv;
+ end function to_std_logic_vector;
- for i in s'range loop
- lowercase(i):= to_lower(s(i));
- end loop;
- return lowercase;
- end to_lower;
+ -- file I/O
+ -------------
+ -- read variable length string from input file
+ procedure str_read(file in_file : text; res_string : out string) is
+ variable l : line;
+ variable c : character;
+ variable is_string : boolean;
+ begin
+ readline(in_file, l);
+ -- clear the contents of the result string
+ for i in res_string'range loop
+ res_string(i) := ' ';
+ end loop;
+ -- read all characters of the line, up to the length
+ -- of the results string
+ for i in res_string'range loop
+ read(l, c, is_string);
+ res_string(i) := c;
+ if not is_string then -- found end of line
+ exit;
+ end if;
+ end loop;
+ end procedure str_read;
+
+
+ -- print string to a file
+ procedure print(file out_file : text; new_string : in string) is
+ variable l : line;
+ begin
+ write(l, new_string);
+ writeline(out_file, l);
+ end procedure print;
--- functions to convert strings into other types
+ -- print character to a file and start new line
+ procedure print(file out_file : text; char : in character) is
+ variable l : line;
+ begin
+ write(l, char);
+ writeline(out_file, l);
+ end procedure print;
--- converts a character into a std_logic
-function to_std_logic(c: character) return std_logic is
- variable sl: std_logic;
+ -- appends contents of a string to a file until line feed occurs
+ -- (LF is considered to be the end of the string)
+ procedure str_write(file out_file : text; new_string : in string) is
begin
- case c is
- when 'U' =>
- sl := 'U';
- when 'X' =>
- sl := 'X';
- when '0' =>
- sl := '0';
- when '1' =>
- sl := '1';
- when 'Z' =>
- sl := 'Z';
- when 'W' =>
- sl := 'W';
- when 'L' =>
- sl := 'L';
- when 'H' =>
- sl := 'H';
- when '-' =>
- sl := '-';
- when others =>
- sl := 'X';
- end case;
- return sl;
- end to_std_logic;
-
-
--- converts a string into std_logic_vector
-
-function to_std_logic_vector(s: string) return std_logic_vector is
- variable slv: std_logic_vector(s'high-s'low downto 0);
- variable k: integer;
-begin
- k := s'high-s'low;
- for i in s'range loop
- slv(k) := to_std_logic(s(i));
- k := k - 1;
- end loop;
- return slv;
-end to_std_logic_vector;
-
-
-
-
-
-
-----------------
--- file I/O --
-----------------
-
-
-
--- read variable length string from input file
-
-procedure str_read(file in_file: TEXT;
- res_string: out string) is
-
- variable l: line;
- variable c: character;
- variable is_string: boolean;
-
- begin
-
- readline(in_file, l);
- -- clear the contents of the result string
- for i in res_string'range loop
- res_string(i) := ' ';
- end loop;
- -- read all characters of the line, up to the length
- -- of the results string
- for i in res_string'range loop
- read(l, c, is_string);
- res_string(i) := c;
- if not is_string then -- found end of line
- exit;
- end if;
- end loop;
-
-end str_read;
-
-
--- print string to a file
-procedure print(file out_file: TEXT;
- new_string: in string) is
-
- variable l: line;
-
- begin
-
- write(l, new_string);
- writeline(out_file, l);
-
-end print;
-
-
--- print character to a file and start new line
-procedure print(file out_file: TEXT;
- char: in character) is
-
- variable l: line;
-
- begin
-
- write(l, char);
- writeline(out_file, l);
-
-end print;
-
-
-
--- appends contents of a string to a file until line feed occurs
--- (LF is considered to be the end of the string)
-
-procedure str_write(file out_file: TEXT;
- new_string: in string) is
- begin
-
- for i in new_string'range loop
- print(out_file, new_string(i));
- if new_string(i) = LF then -- end of string
- exit;
- end if;
- end loop;
-
-end str_write;
-
-
-
-
-end txt_util;
-
+ for i in new_string'range loop
+ print(out_file, new_string(i));
+ if new_string(i) = LF then -- end of string
+ exit;
+ end if;
+ end loop;
+ end procedure str_write;
+end package body txt_util;
diff --git a/zpu/hdl/zpu4/src/zpuio.vhd b/zpu/hdl/zpu4/src/zpuio.vhd
index 2c7fd41..9ca9050 100644
--- a/zpu/hdl/zpu4/src/zpuio.vhd
+++ b/zpu/hdl/zpu4/src/zpuio.vhd
@@ -1,232 +1,218 @@
-library IEEE;
-use IEEE.STD_LOGIC_1164.ALL;
-use IEEE.STD_LOGIC_UNSIGNED.ALL;
+library ieee;
+use ieee.std_logic_1164.all;
library work;
use work.zpu_config.all;
use work.zpupkg.all;
entity zpuio is
- port ( areset : in std_logic;
- cpu_clk : in std_logic;
- clk_status : in std_logic_vector(2 downto 0);
- cpu_din : in std_logic_vector(15 downto 0);
- cpu_a : in std_logic_vector(20 downto 0);
- cpu_we : in std_logic_vector(1 downto 0);
- cpu_re : in std_logic;
- cpu_dout : inout std_logic_vector(15 downto 0));
+ port (
+ areset : in std_logic;
+ cpu_clk : in std_logic;
+ clk_status : in std_logic_vector(2 downto 0);
+ cpu_din : in std_logic_vector(15 downto 0);
+ cpu_a : in std_logic_vector(20 downto 0);
+ cpu_we : in std_logic_vector(1 downto 0);
+ cpu_re : in std_logic;
+ cpu_dout : inout std_logic_vector(15 downto 0)
+ );
end zpuio;
architecture behave of zpuio is
-signal timer_read : std_logic_vector(7 downto 0);
---signal timer_write : std_logic_vector(7 downto 0);
-signal timer_we : std_logic;
-
-
-signal io_busy : std_logic;
-signal io_read : std_logic_vector(7 downto 0);
---signal io_write : std_logic_vector(7 downto 0);
-signal io_addr : std_logic_vector(maxAddrBit downto minAddrBit);
-signal io_writeEnable : std_logic;
-signal Enable : std_logic;
-
-signal din : std_logic_vector(7 downto 0);
-signal dout : std_logic_vector(7 downto 0);
-signal adr : std_logic_vector(15 downto 0);
-signal break : std_logic;
-signal we : std_logic;
-signal re : std_logic;
-
-
--- uart forwarding...
-
-signal uartTXPending : std_logic;
-signal uartTXCleared : std_logic;
-signal uartData : std_logic_vector(7 downto 0);
-
-signal readingTimer : std_logic;
-
-
-
-
-signal mem_busy : std_logic;
-signal mem_read : std_logic_vector(wordSize-1 downto 0);
-signal mem_write : std_logic_vector(wordSize-1 downto 0);
-signal mem_addr : std_logic_vector(maxAddrBitIncIO downto 0);
-signal mem_writeEnable : std_logic;
-signal mem_readEnable : std_logic;
-signal mem_writeMask: std_logic_vector(wordBytes-1 downto 0);
-
-signal dram_mem_busy : std_logic;
-signal dram_mem_read : std_logic_vector(wordSize-1 downto 0);
-signal dram_mem_write : std_logic_vector(wordSize-1 downto 0);
-signal dram_mem_writeEnable : std_logic;
-signal dram_mem_readEnable : std_logic;
-signal dram_mem_writeMask: std_logic_vector(wordBytes-1 downto 0);
-
-
-
---signal io_mem_read : std_logic_vector(7 downto 0);
---signal io_mem_writeEnable : std_logic;
---signal io_mem_readEnable : std_logic;
-signal io_readEnable : std_logic;
-
-
-signal dram_read : std_logic;
-
-
+ signal timer_read : std_logic_vector(7 downto 0);
+ signal timer_we : std_logic;
+ --
+ signal io_busy : std_logic;
+ signal io_read : std_logic_vector(7 downto 0);
+ signal io_addr : std_logic_vector(maxAddrBit downto minAddrBit);
+ signal io_writeEnable : std_logic;
+ signal Enable : std_logic;
+ --
+ signal din : std_logic_vector(7 downto 0);
+ signal dout : std_logic_vector(7 downto 0);
+ signal adr : std_logic_vector(15 downto 0);
+ signal break : std_logic;
+ signal we : std_logic;
+ signal re : std_logic;
+ --
+ -- uart forwarding...
+ signal uartTXPending : std_logic;
+ signal uartTXCleared : std_logic;
+ signal uartData : std_logic_vector(7 downto 0);
+ --
+ signal readingTimer : std_logic;
+ --
+ --
+ signal mem_busy : std_logic;
+ signal mem_read : std_logic_vector(wordSize-1 downto 0);
+ signal mem_write : std_logic_vector(wordSize-1 downto 0);
+ signal mem_addr : std_logic_vector(maxAddrBitIncIO downto 0);
+ signal mem_writeEnable : std_logic;
+ signal mem_readEnable : std_logic;
+ signal mem_writeMask : std_logic_vector(wordBytes-1 downto 0);
+ --
+ signal dram_mem_busy : std_logic;
+ signal dram_mem_read : std_logic_vector(wordSize-1 downto 0);
+ signal dram_mem_write : std_logic_vector(wordSize-1 downto 0);
+ signal dram_mem_writeEnable : std_logic;
+ signal dram_mem_readEnable : std_logic;
+ signal dram_mem_writeMask : std_logic_vector(wordBytes-1 downto 0);
+ --
+ signal io_readEnable : std_logic;
+ --
+ signal dram_read : std_logic;
begin
- io_addr <= mem_addr(maxAddrBit downto minAddrBit);
-
- timerinst: timer port map (
- clk => cpu_clk,
- areset => areset,
- we => timer_we,
- din => mem_write(7 downto 0),
- adr => io_addr(4 downto 2),
- dout => timer_read);
-
- zpu: zpu_core port map (
- clk => cpu_clk ,
- areset => areset,
- in_mem_busy => mem_busy,
- mem_read => mem_read,
- mem_write => mem_write,
- out_mem_addr => mem_addr,
- out_mem_writeEnable => mem_writeEnable,
- out_mem_readEnable => mem_readEnable,
- mem_writeMask => mem_writeMask,
- interrupt => '0',
- break => break);
-
-
-ram_imp: dram port map (
- clk => cpu_clk ,
- areset => areset,
- mem_busy => dram_mem_busy,
- mem_read => dram_mem_read,
- mem_write => mem_write,
- mem_addr => mem_addr(maxAddrBit downto 0),
- mem_writeEnable => dram_mem_writeEnable,
- mem_readEnable => dram_mem_readEnable,
- mem_writeMask => mem_writeMask);
-
-
-
- fauxUart:
- process(cpu_clk, areset)
- begin
- if areset = '1' then
- io_busy <= '0';
- uartTXPending <= '0';
- timer_we <= '0';
- io_busy <= '0';
- uartData <= x"58"; -- 'X'
- readingTimer <= '0';
- elsif (cpu_clk'event and cpu_clk = '1') then
- timer_we <= '0';
- io_busy <= '0';
- if uartTXCleared = '1' then
- uartTXPending <= '0';
- end if;
-
- if io_writeEnable = '1' then
- if io_addr=x"2028003" then
- -- Write to UART
- uartData <= mem_write(7 downto 0);
- uartTXPending <= '1';
- io_busy <= '1';
- elsif io_addr(12)='1' then
- timer_we <= '1';
- io_busy <= '1';
- else
--- report "Illegal IO write" severity failure;
- end if;
- end if;
- if (io_readEnable = '1') then
- if io_addr=x"2028003" then
- io_read <= (0=>'1', -- recieve empty
- 1 => uartTXPending, -- tx full
- others => '0');
- io_busy <= '1';
- elsif io_addr(12)='1' then
- readingTimer <= '1';
- io_busy <= '1';
- elsif io_addr(11)='1' then
- io_read <= ZPU_Frequency;
- io_busy <= '1';
- else
--- report "Illegal IO read" severity failure;
- end if;
-
- else
- if (readingTimer = '1') then
- readingTimer <= '0';
- io_read <= timer_read;
- io_busy <= '0';
- else
- io_read <= (others => '1');
- end if;
- end if;
- end if;
- end process;
-
-
- forwardUARTOutputToARM:
- process(cpu_clk, areset)
- begin
- if areset = '1' then
- uartTXCleared <= '0';
- elsif (cpu_clk = '1' and cpu_clk'event) then
- if cpu_we(0) = '1' and cpu_a(3 downto 1) = "000" then
- uartTXCleared <= cpu_din(0);
- else
- uartTXCleared <= uartTXCleared;
- end if;
- end if;
- end process;
-
- cpu_dout(7 downto 0) <= uartData when (cpu_re = '1' and cpu_a(3 downto 1) = "001") else (others => 'Z');
- cpu_dout <= (0 => uartTXPending, others => '0') when (cpu_re = '1' and cpu_a(3 downto 1) = "000") else (others => 'Z');
-
- dram_mem_writeEnable <= mem_writeEnable and not mem_addr(ioBit);
- dram_mem_readEnable <= mem_readEnable and not mem_addr(ioBit);
- io_writeEnable <= mem_writeEnable and mem_addr(ioBit);
--- io_readEnable <= mem_readEnable and mem_addr(ioBit);
- mem_busy <= io_busy or dram_mem_busy or dram_read or io_readEnable;
-
- -- Memory reads either come from IO or DRAM. We need to pick the right one.
- memorycontrol:
- process(cpu_clk, areset)
- begin
- if areset = '1' then
- dram_read <= '0';
- io_readEnable <= '0';
-
-
- elsif (cpu_clk'event and cpu_clk = '1') then
- mem_read <= (others => '0');
- if mem_addr(ioBit)='0' and mem_readEnable='1' then
- dram_read <= '1';
- end if;
- if dram_read='1' and dram_mem_busy='0' then
- dram_read <= '0';
- mem_read <= dram_mem_read;
- end if;
-
- if mem_addr(ioBit)='1' and mem_readEnable='1' then
- io_readEnable <= '1';
- end if;
- if io_readEnable='1' and io_busy='0' then
- io_readEnable <= '0';
- mem_read(7 downto 0) <= io_read;
- end if;
-
- end if;
- end process;
-
-
-end behave;
+ io_addr <= mem_addr(maxAddrBit downto minAddrBit);
+
+ timerinst : timer
+ port map (
+ clk => cpu_clk,
+ areset => areset,
+ we => timer_we,
+ din => mem_write(7 downto 0),
+ adr => io_addr(4 downto 2),
+ dout => timer_read
+ );
+
+ zpu : zpu_core
+ port map (
+ clk => cpu_clk ,
+ areset => areset,
+ in_mem_busy => mem_busy,
+ mem_read => mem_read,
+ mem_write => mem_write,
+ out_mem_addr => mem_addr,
+ out_mem_writeEnable => mem_writeEnable,
+ out_mem_readEnable => mem_readEnable,
+ mem_writeMask => mem_writeMask,
+ interrupt => '0',
+ break => break
+ );
+
+
+ ram_imp : dram
+ port map (
+ clk => cpu_clk,
+ areset => areset,
+ mem_busy => dram_mem_busy,
+ mem_read => dram_mem_read,
+ mem_write => mem_write,
+ mem_addr => mem_addr(maxAddrBit downto 0),
+ mem_writeEnable => dram_mem_writeEnable,
+ mem_readEnable => dram_mem_readEnable,
+ mem_writeMask => mem_writeMask
+ );
+
+
+ fauxUart : process(cpu_clk, areset)
+ begin
+ if areset = '1' then
+ io_busy <= '0';
+ uartTXPending <= '0';
+ timer_we <= '0';
+ io_busy <= '0';
+ uartData <= x"58"; -- 'X'
+ readingTimer <= '0';
+ elsif rising_edge(cpu_clk) then
+ timer_we <= '0';
+ io_busy <= '0';
+ if uartTXCleared = '1' then
+ uartTXPending <= '0';
+ end if;
+
+ if io_writeEnable = '1' then
+ if io_addr = x"2028003" then
+ -- Write to UART
+ uartData <= mem_write(7 downto 0);
+ uartTXPending <= '1';
+ io_busy <= '1';
+ elsif io_addr(12) = '1' then
+ timer_we <= '1';
+ io_busy <= '1';
+ else
+ -- report "Illegal IO write" severity failure;
+ end if;
+ end if;
+ if (io_readEnable = '1') then
+ if io_addr = x"2028003" then
+ io_read <= (0 => '1', -- recieve empty
+ 1 => uartTXPending, -- tx full
+ others => '0');
+ io_busy <= '1';
+ elsif io_addr(12) = '1' then
+ readingTimer <= '1';
+ io_busy <= '1';
+ elsif io_addr(11) = '1' then
+ io_read <= ZPU_Frequency;
+ io_busy <= '1';
+ else
+ -- report "Illegal IO read" severity failure;
+ end if;
+
+ else
+ if (readingTimer = '1') then
+ readingTimer <= '0';
+ io_read <= timer_read;
+ io_busy <= '0';
+ else
+ io_read <= (others => '1');
+ end if;
+ end if;
+ end if;
+ end process;
+
+
+ forwardUARTOutputToARM : process(cpu_clk, areset)
+ begin
+ if areset = '1' then
+ uartTXCleared <= '0';
+ elsif rising_edge(cpu_clkt) then
+ if cpu_we(0) = '1' and cpu_a(3 downto 1) = "000" then
+ uartTXCleared <= cpu_din(0);
+ else
+ uartTXCleared <= uartTXCleared;
+ end if;
+ end if;
+ end process;
+
+ cpu_dout(7 downto 0) <= uartData when (cpu_re = '1' and cpu_a(3 downto 1) = "001") else (others => 'Z');
+ cpu_dout <= (0 => uartTXPending, others => '0') when (cpu_re = '1' and cpu_a(3 downto 1) = "000") else (others => 'Z');
+
+ dram_mem_writeEnable <= mem_writeEnable and not mem_addr(ioBit);
+ dram_mem_readEnable <= mem_readEnable and not mem_addr(ioBit);
+ io_writeEnable <= mem_writeEnable and mem_addr(ioBit);
+ mem_busy <= io_busy or dram_mem_busy or dram_read or io_readEnable;
+
+ -- Memory reads either come from IO or DRAM. We need to pick the right one.
+ memorycontrol : process(cpu_clk, areset)
+ begin
+ if areset = '1' then
+ dram_read <= '0';
+ io_readEnable <= '0';
+
+ elsif rising_edge(cpu_clk) then
+ mem_read <= (others => '0');
+ if mem_addr(ioBit) = '0' and mem_readEnable = '1' then
+ dram_read <= '1';
+ end if;
+ if dram_read = '1' and dram_mem_busy = '0' then
+ dram_read <= '0';
+ mem_read <= dram_mem_read;
+ end if;
+
+ if mem_addr(ioBit) = '1' and mem_readEnable = '1' then
+ io_readEnable <= '1';
+ end if;
+ if io_readEnable = '1' and io_busy = '0' then
+ io_readEnable <= '0';
+ mem_read(7 downto 0) <= io_read;
+ end if;
+
+ end if;
+ end process;
+
+
+end architecture behave;
OpenPOWER on IntegriCloud