summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authoroharboe <oharboe>2008-04-15 06:00:18 +0000
committeroharboe <oharboe>2008-04-15 06:00:18 +0000
commitaf198f5c76764dd55a5eed7a29ab24b032792e89 (patch)
tree6d2d774af0ae060506580f2265417ed424c2284a
parent4f29574821f2931771b30ee8e2be33030e7695a8 (diff)
downloadzpu-af198f5c76764dd55a5eed7a29ab24b032792e89.zip
zpu-af198f5c76764dd55a5eed7a29ab24b032792e89.tar.gz
retired
-rw-r--r--zpu/hdl/zpu4/src/status.txt109
1 files changed, 0 insertions, 109 deletions
diff --git a/zpu/hdl/zpu4/src/status.txt b/zpu/hdl/zpu4/src/status.txt
deleted file mode 100644
index df01caf..0000000
--- a/zpu/hdl/zpu4/src/status.txt
+++ /dev/null
@@ -1,109 +0,0 @@
-- Before NEQBRANCH opt 4.684 DMIPS 8.0 cycles average, after
-- opcode pairs
-
-0x6060 0.1519223038446077 75961 9.048362120309708 LOADSP + LOADSP
-0x4040 0.13967027934055867 69835 11.08668042546436 STORESP + STORESP
-0x8038 0.10230620461240922 51153 10.251102204408818 IM + NEQBRANCH
-0x4060 0.09856219712439425 49281 9.822802471596571 STORESP + LOADSP
-0x6080 0.09734219468438937 48671 6.483415478886373 LOADSP + IM
-0x3860 0.08642217284434568 43211 12.616350364963504 NEQBRANCH + LOADSP
-0x8080 0.060966121932243864 30483 4.275915275634731 IM + IM
-0x8005 0.05317010634021268 26585 6.572311495673671 IM + ADD
-0x540 0.05215210430420861 26076 9.339541547277937 ADD + STORESP
-0x3d0d 0.050808101616203236 25404 12.398243045387995
-0xd04 0.0466000932001864 23300 20.0
-0x6040 0.04389608779217558 21948 9.460344827586207
-0x4080 0.043648087296174594 21824 7.630769230769231
-0xc80 0.03966807933615867 19834 11.438292964244521
-0x8010 0.0391500783001566 19575 6.1248435544430535
-0x480 0.038798077596155195 19399 10.941342357586013
-
-
-- zpu_core.vhd: 1500 LUTs. Xilinx ISE reports 83MHz maximum frequency after P&R
- which matches what I've found w/my ic300.vhd testbench
-
-- zpu_core_instack.vhd
- - problems w/simulation trace since storeb/loadb will run into undefined memory
- during emulation. Solution: implement loadb+storeb.
- - simulation needs to read cycles from ModelSim trace so as to m ake readcycles
- not cause false positives. This has other interesting potentials w.r.t.
- knowing which instructions take the longest.
-
-- Ca. 1700 LUT inc. all instructions. Removing all higher level instructions
- => 1300.
-
-- Review memory interface
- - When is mem_busy high? Will it be high on the next cycle after
- I've send mem_read/writeEnable?
- - Should I hold off posting a read/write until mem_busy = '0'?
- - Write posting could increase performance somewhat. Should there be
- a seperate write busy signal?
- - Synchronous reset? The ARM7 will have to copy the program to DRAM and
- then start the ZPU.
-
-- Current instruction set has
- - 31 DMIPS single cycle performance Simulator.java
- - 8 DMIPS w/single cycle RAM access in ModelSim
-
-112 0.06100380865858346 67215918
-56 0.04139603650830458 45611457
-129 0.0375812381475752 41408192
-5 0.03703417264799563 40805418
-113 0.03540341331682748 39008596
-128 0.0343154384313754 37809831
-83 0.03322159422742951 36604599
-114 0.03213492807203279 35407276
-132 0.03158580962697109 34802240
-12 0.03049709687915076 33602662
-8 0.029409690138646426 32404523
-115 0.026690690908727877 29408644
-46 0.025054316381406774 27605635
-82 0.023965804208719754 26406278
-84 0.023961360698074072 26401382
-116 0.023417718589457643 25802380
-81 0.02179306727026773 24012288
-117 0.021783900714401432 24002188
-4 0.01797685126990833 19807461
-6 0.016340292503890113 18004249
-85 0.016339001017850734 18002826
-255 0.016338918428089957 18002735
-86 0.016337281154151066 18000931
-11 0.011984767180825744 13205194
-51 0.0114390303780569 12603884
-38 0.010892246228211845 12001420
-118 0.010347263624247446 11400941
-131 0.009257503529350904 10200209
-7 0.008713386756504965 9600684
-22 0.008712946580307425 9600199
-
-
-64 0.16176824859336478 178241352
-96 0.23147927881894828 255051161
-128 0.2646966482624612 291651105
-
-
-- Alternate memory interface to allow more caching in memory subsystem?
-
--- The memory interface allows a dual port memory to be used
--- to increase performance.
---
--- Also it is possible to implement a zero cycle register file instead
--- of memory, though obviously that will cause problems w.r.t. max
--- frequency for the ZPU.
---
--- mem_writeEnable - set to '1' for a single cycle to send off a write request.
--- mem_write is valid only while mem_writeEnable='1'.
--- mem_readEnable - set to '1' for a single cycle to send off a read request.
--- mem_read is a single cycle while mem_read_busy='0'.
---
--- mem_read/write_busy - It is illegal to send off a read/write request when mem_read/write_busy='1'.
--- Set to '0' when mem_read is valid after a read request. Note that
--- the definition allows zero wait state ram.
--- mem_read/write_addr - address for read/write request
--- mem_read - read data. Valid only on the cycle after mem_busy='0' after
--- mem_readEnable='1' for a single cycle.
--- mem_write - data to write
--- mem_writeMask - set to '1' for those bits that are to be written to memory upon
--- write request
--- break - set to '1' when CPU hits break instruction
--- interrupt - set to '1' until interrupts are cleared by CPU.
OpenPOWER on IntegriCloud