path: root/src/usr/local/www/wizards/setup_wizard.xml

<?xml version="1.0" encoding="utf-8" ?>
<pfsensewizard>
<copyright>
/*
 * setup_wizard.xml
 *
 * part of pfSense (https://www.pfsense.org)
 * Copyright (c) 2004-2016 Electric Sheep Fencing, LLC
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgment:
 *    "This product includes software developed by the pfSense Project
 *    for use in the pfSense® software distribution. (http://www.pfsense.org/).
 *
 * 4. The names "pfSense" and "pfSense Project" must not be used to
 *    endorse or promote products derived from this software without
 *    prior written permission. For written permission, please contact
 *    coreteam@pfsense.org.
 *
 * 5. Products derived from this software may not be called "pfSense"
 *    nor may "pfSense" appear in their names without prior written
 *    permission of the Electric Sheep Fencing, LLC.
 *
 * 6. Redistributions of any form whatsoever must retain the following
 *    acknowledgment:
 *
 * "This product includes software developed by the pfSense Project
 * for use in the pfSense software distribution (http://www.pfsense.org/).
 *
 * THIS SOFTWARE IS PROVIDED BY THE pfSense PROJECT ``AS IS'' AND ANY
 * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE pfSense PROJECT OR
 * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
 * OF THE POSSIBILITY OF SUCH DAMAGE.
 */
</copyright>
<totalsteps>10</totalsteps>
<step>
	<id>1</id>
	<title>pfSense Setup</title>
	<disableheader>true</disableheader>
	<description>This wizard will provide guidance through the initial configuration of pfSense.&lt;br/&gt;&lt;br/&gt; The wizard may be stopped at any time by clicking the logo image at the top of the screen.</description>
	<fields>
		<field>
			<name>Next</name>
			<type>submit</type>
		</field>
	</fields>
	<stepbeforeformdisplay>
		conf_mount_rw();
		unlink_if_exists('/conf/trigger_initial_wizard');
		conf_mount_ro();
	</stepbeforeformdisplay>
</step>
<step>
	<id>2</id>
	<title>Bling your pfSense with pfSense Gold</title>
	<disableheader>true</disableheader>
	<description>Feel the power of a pfSense Gold subscription. Receive special benefits while supporting ongoing development of the Open Source pfSense project.&lt;br/&gt; &lt;br/&gt; Benefits include access to our AutoConfigBackup secure cloud based backup service for up to 10 hosts, pre-publication access to the updated pfSense: The Definitive Guide book in PDF, fully updated for the pfSense 2.1 release, and a monthly online MeetUp! Video conference to discuss and demonstrate advanced features and architectures using pfSense. &lt;br/&gt; &lt;br/&gt; Go to &lt;a href="https://www.pfsense.org/gold" target="_blank"&gt; pfSense Gold Subscriptions&lt;/a&gt; to sign up now. &lt;br/&gt; &lt;br/&gt; </description>
	<fields>
		<field>
			<name>Next</name>
			<type>submit</type>
		</field>
	</fields>
</step>
<step>
	<id>3</id>
	<title>General Information</title>
	<description>On this screen the general pfSense parameters will be set.</description>
	<fields>
		<field>
			<name>Hostname</name>
			<type>input</type>
			<bindstofield>wizardtemp->system->hostname</bindstofield>
			<description>EXAMPLE: myserver</description>
			<validate>^[a-zA-Z0-9-]+$</validate>
			<message>Invalid Hostname</message>
		</field>
		<field>
			<name>Domain</name>
			<type>input</type>
			<bindstofield>wizardtemp->system->domain</bindstofield>
			<description>EXAMPLE: mydomain.com</description>
			<validate>^[a-zA-Z0-9.-]+$</validate>
			<message>Domain name field is invalid</message>
		</field>
		<field>
			<name>DNS Resolver Behavior</name>
			<type>text</type>
			<description>The default behavior of the DNS Resolver will ignore manually configured DNS servers for client queries and query root DNS servers directly. To use the manually configured DNS servers below for client queries, visit Services &gt; DNS Resolver and enable DNS Query Forwarding after completing the wizard.</description>
		</field>
		<field>
			<name>Primary DNS Server</name>
			<type>input</type>
			<bindstofield>system->dnsserver</bindstofield>
			<!-- we must unset the fields because this is an array. -->
			<unsetfield>yes</unsetfield>
			<arraynum>0</arraynum>
			<validate>^(?:(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.){3}(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)$</validate>
			<message>Primary DNS Server field is invalid</message>
		</field>
		<field>
			<name>Secondary DNS Server</name>
			<type>input</type>
			<bindstofield>system->dnsserver</bindstofield>
			<arraynum>1</arraynum>
			<validate>^(?:(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.){3}(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)$</validate>
			<message>Secondary DNS Server field is invalid</message>
		</field>
		<field>
			<name>Override DNS</name>
			<description>Allow DNS servers to be overridden by DHCP/PPP on WAN</description>
			<type>checkbox</type>
			<bindstofield>system->dnsallowoverride</bindstofield>
		</field>
		<field>
			<name>Next</name>
			<type>submit</type>
		</field>
	</fields>
	<stepbeforeformdisplay>
		<![CDATA[
		$config['wizardtemp'] = array();
		$config['wizardtemp']['system'] = array();
		$config['wizardtemp']['system']['hostname'] = $config['system']['hostname'];
		$config['wizardtemp']['system']['domain'] = $config['system']['domain'];
		]]>
	</stepbeforeformdisplay>
	<stepsubmitphpaction>
		<![CDATA[
		if(empty($_POST['hostname']) || !is_unqualified_hostname($_POST['hostname'])) {
			include("head.inc");
			$input_errors[] = "Hostname is invalid. Please press back in the browser window and correct.";
			print_input_errors($input_errors);
			include("foot.inc");
			die;
		}
		if(empty($_POST['domain']) || !is_domain($_POST['domain'])) {
			include("head.inc");
			$input_errors[] = "Domain is invalid. Please press back in the browser window and correct.";
			print_input_errors($input_errors);
			include("foot.inc");
			die;
		}
		if(!empty($_POST['primarydnsserver']) && !is_ipaddr($_POST['primarydnsserver'])) {
			include("head.inc");
			$input_errors[] = "Primary DNS server is invalid. Please press back in the browser window and correct.";
			print_input_errors($input_errors);
			include("foot.inc");
			die;
		}
		if(!empty($_POST['secondarydnsserver']) && !is_ipaddr($_POST['secondarydnsserver'])) {
			include("head.inc");
			$input_errors[] = "Second DNS server is invalid. Please press back in the browser window and correct.";
			print_input_errors($input_errors);
			include("foot.inc");
			die;
		}
		]]>
	</stepsubmitphpaction>
</step>
<step>
	<id>4</id>
	<title>Time Server Information</title>
	<description>Please enter the time, date and time zone.</description>
	<fields>
		<field>
			<name>Time server hostname</name>
			<description>Enter the hostname (FQDN) of the time server.</description>
			<type>input</type>
			<bindstofield>system->timeservers</bindstofield>
		</field>
		<field>
			<name>Timezone</name>
			<type>timezone_select</type>
			<bindstofield>system->timezone</bindstofield>
		</field>
		<field>
			<name>Next</name>
			<type>submit</type>
		</field>
	</fields>
	<stepsubmitphpaction>
		<![CDATA[
		foreach (explode(' ', $_POST['timeserverhostname']) as $ts) {
			if (!is_domain($ts)) {
				$input_errors[] = gettext("NTP Time Server names may only contain the characters a-z, 0-9, '-' and '.'. Entries may be separated by spaces. Please press back in the browser window and correct.");
				print_input_errors($input_errors);
				include("foot.inc");
				die;
			}
		}
		]]>
	</stepsubmitphpaction>
</step>
<step>
	<id>5</id>
	<disableallfieldsbydefault>true</disableallfieldsbydefault>
	<title>Configure WAN Interface</title>
	<description>On this screen the Wide Area Network information will be configured.</description>
	<javascriptafterformdisplay>
		var selectedItem = 0;
		if(document.forms[0].ipaddress.value == 'dhcp') {
			selectedItem = 1;
			document.forms[0].ipaddress.value = '';
		} else if(document.forms[0].ipaddress.value == 'pppoe') {
			selectedItem = 2;
			document.forms[0].ipaddress.value = '';
		} else if(document.forms[0].ipaddress.value == 'pptp') {
			selectedItem = 3;
			document.forms[0].ipaddress.value = '';
		} else if(document.forms[0].ipaddress.value == 'ppp' || document.forms[0].ipaddress.value == 'l2tp') {
			document.forms[0].ipaddress.value = '';
		} else {
			selectedItem = 0;
		}
		document.forms[0].selectedtype.selectedIndex = selectedItem;
		enableitems(selectedItem);

		events.push(function(){
			$('#showpppoepassword').click(function(event) {
				if(this.checked) {
					$('#pppoepassword').attr('type', 'text');
				} else {
					$('#pppoepassword').attr('type', 'password');
				}
			});

			$('#showpptppassword').click(function(event) {
				if(this.checked) {
					$('#pptppassword').attr('type', 'text');
				} else {
					$('#pptppassword').attr('type', 'password');
				}
			});
		});

	</javascriptafterformdisplay>
	<fields>
		<field>
			<name>SelectedType</name>
			<type>select</type>
			<donotdisable>true</donotdisable>
			<options>
				<option>
					<name>Static</name>
					<value>Static</value>
					<enablefields>ipaddress,subnetmask,upstreamgateway</enablefields>
				</option>
				<option>
					<name>DHCP</name>
					<value>dhcp</value>
					<enablefields>dhcphostname</enablefields>
				</option>
				<option>
					<name>PPPoE</name>
					<value>pppoe</value>
					<enablefields>pppoeusername,pppoepassword,pppoeservicename,pppoedialondemand,pppoeidletimeout,showpppoepassword</enablefields>
				</option>
				<option>
					<name>PPTP</name>
					<value>pptp</value>
					<enablefields>pptpusername,pptppassword,pptplocalipaddress,pptplocalsubnet,pptpremoteipaddress,pptpdialondemand,pptpidletimeout,showpptppassword
					</enablefields>
				</option>
			</options>
		</field>
		<field>
			<name>General configuration</name>
			<type>listtopic</type>
		</field>
		<field>
			<donotdisable>true</donotdisable>
			<name>MAC Address</name>
			<bindstofield>interfaces->wan->spoofmac</bindstofield>
			<type>input</type>
			<description> This field can be used to modify ("spoof") the MAC address of the WAN interface (may be required with some cable connections). Enter a MAC address in the following format: xx:xx:xx:xx:xx:xx or leave blank.</description>
			<validate>^([0-9a-f]{2}([:-]||$)){6}$</validate>
			<message>MAC Address field is invalid</message>
		</field>
		<field>
			<donotdisable>true</donotdisable>
			<name>MTU</name>
			<type>input</type>
			<bindstofield>interfaces->wan->mtu</bindstofield>
			<description> Set the MTU of the WAN interface. If this field is left blank, an MTU of 1492 bytes for PPPoE and 1500 bytes for all other connection types will be assumed.</description>
		</field>
		<field>
			<donotdisable>true</donotdisable>
			<name>MSS</name>
			<type>input</type>
			<bindstofield>interfaces->wan->mss</bindstofield>
			<description> If a value is entered in this field, then MSS clamping for TCP connections to the value entered above minus 40 (TCP/IP header size) will be in effect. If this field is left blank, an MSS of 1492 bytes for PPPoE and 1500 bytes for all other connection types will be assumed. This should match the above MTU value in most all cases.</description>
		</field>
		<field>
			<name>Static IP Configuration</name>
			<type>listtopic</type>
		</field>
		<field>
			<name>IP Address</name>
			<bindstofield>interfaces->wan->ipaddr</bindstofield>
			<type>input</type>
			<typehint> / </typehint>
			<combinefieldsbegin>true</combinefieldsbegin>
			<validate>^(?:(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.){3}(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)$</validate>
			<message>IP Address field is invalid</message>
		</field>
		<field>
			<combinefieldsend>true</combinefieldsend>
			<dontdisplayname>true</dontdisplayname>
			<dontcombinecells>true</dontcombinecells>
			<name>Subnet Mask</name>
			<bindstofield>interfaces->wan->subnet</bindstofield>
			<type>subnet_select</type>
		</field>
		<field>
			<name>Upstream Gateway</name>
			<bindstofield>wizardtemp->wangateway</bindstofield>
			<type>input</type>
			<validate>^(?:(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.){3}(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)$</validate>
			<message>Gateway IP Address field is invalid</message>
		</field>
		<field>
			<name>DHCP client configuration</name>
			<type>listtopic</type>
		</field>
		<field>
			<name>DHCP Hostname</name>
			<type>input</type>
			<bindstofield>interfaces->wan->dhcphostname</bindstofield>
			<description> The value in this field is sent as the DHCP client identifier and hostname when requesting a DHCP lease. Some ISPs may require this (for client identification).</description>
		</field>
		<field>
			<name>PPPoE configuration</name>
			<type>listtopic</type>
		</field>
		<field>
			<name>PPPoE Username</name>
			<type>input</type>
			<bindstofield>wizardtemp->wan->username</bindstofield>
		</field>
		<field>
			<name>PPPoE Password</name>
			<type>password</type>
			<bindstofield>wizardtemp->wan->password</bindstofield>
		</field>
		<field>
			<name>Show PPPoE password</name>
			<type>checkbox</type>
			<typehint>Reveal password characters</typehint>
		</field>
		<field>
			<name>PPPoE Service name</name>
			<type>input</type>
			<description>Hint: this field can usually be left empty</description>
			<bindstofield>wizardtemp->wan->provider</bindstofield>
		</field>
		<field>
			<name>PPPoE Dial on demand</name>
			<typehint>Enable Dial-On-Demand mode</typehint>
			<type>checkbox</type>
			<description>This option causes the interface to operate in dial-on-demand mode, allowing a virtual full time connection. The interface is configured, but the actual connection of the link is delayed until qualifying outgoing traffic is detected.</description>
			<bindstofield>wizardtemp->wan->ondemand</bindstofield>
		</field>
		<field>
			<name>PPPoE Idle timeout</name>
			<type>input</type>
			<description>If no qualifying outgoing packets are transmitted for the specified number of seconds, the connection is brought down. An idle timeout of zero disables this feature.</description>
			<bindstofield>wizardtemp->wan->idletimeout</bindstofield>
		</field>
		<field>
			<name>PPTP configuration</name>
			<type>listtopic</type>
		</field>
		<field>
			<name>PPTP Username</name>
			<type>input</type>
			<bindstofield>wizardtemp->wan->pptpusername</bindstofield>
		</field>
		<field>
			<name>PPTP Password</name>
			<type>password</type>
			<bindstofield>wizardtemp->wan->pptppassword</bindstofield>
		</field>
		<field>
			<name>Show PPTP password</name>
			<type>checkbox</type>
			<typehint>Reveal password characters</typehint>
		</field>
		<field>
			<combinefieldsbegin>true</combinefieldsbegin>
			<name>PPTP Local IP Address</name>
			<type>input</type>
			<typehint> / </typehint>
			<bindstofield>wizardtemp->wan->localip</bindstofield>
			<validate>^(?:(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.){3}(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)$</validate>
			<message>PPTP Local IP Address field is invalid</message>
		</field>
		<field>
			<combinefieldsend>true</combinefieldsend>
			<dontdisplayname>true</dontdisplayname>
			<dontcombinecells>true</dontcombinecells>
			<name>pptplocalsubnet</name>
			<bindstofield>wizardtemp->wan->subnet</bindstofield>
			<type>subnet_select</type>
		</field>
		<field>
			<name>PPTP Remote IP Address</name>
			<bindstofield>wizardtemp->wan->gateway</bindstofield>
			<type>input</type>
			<validate>^(?:(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.){3}(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)$</validate>
			<message>PPTP Remote IP Address field is invalid</message>
		</field>
		<field>
			<name>PPTP Dial on demand</name>
			<typehint>Enable Dial-On-Demand mode</typehint>
			<type>checkbox</type>
			<bindstofield>wizardtemp->wan->pptpondemand</bindstofield>
			<description>This option causes the interface to operate in dial-on-demand mode, allowing a virtual full time connection. The interface is configured, but the actual connection of the link is delayed until qualifying outgoing traffic is detected.</description>
		</field>
		<field>
			<name>PPTP Idle timeout</name>
			<type>input</type>
			<bindstofield>wizardtemp->wan->pptpidletimeout</bindstofield>
			<description>If no qualifying outgoing packets are transmitted for the specified number of seconds, the connection is brought down. An idle timeout of zero disables this feature.</description>
		</field>
		<field>
			<name>RFC1918 Networks</name>
			<type>listtopic</type>
		</field>
		<field>
			<donotdisable>true</donotdisable>
			<name>Block RFC1918 Private Networks</name>
			<description> When set, this option blocks traffic from IP addresses that are reserved for private networks as per RFC 1918 (10/8, 172.16/12, 192.168/16) as well as loopback addresses (127/8). This option should generally be left turned on, unless the WAN network lies in such a private address space, too.</description>
			<type>checkbox</type>
			<bindstofield>interfaces->wan->blockpriv</bindstofield>
			<typehint>Block private networks from entering via WAN</typehint>
		</field>
		<field>
			<name>Block bogon networks</name>
			<type>listtopic</type>
		</field>
		<field>
			<donotdisable>true</donotdisable>
			<name>Block bogon networks</name>
			<description>When set, this option blocks traffic from IP addresses that are reserved (but not RFC 1918) or not yet assigned by IANA. Bogons are prefixes that should never appear in the Internet routing table, and obviously should not appear as the source address in any packets received.</description>
			<type>checkbox</type>
			<bindstofield>interfaces->wan->blockbogons</bindstofield>
			<typehint>Block non-Internet routed networks from entering via WAN</typehint>
		</field>
		<field>
			<name>Next</name>
			<type>submit</type>
		</field>
	</fields>
	<stepbeforeformdisplay>
		<![CDATA[
		if (empty($config['interfaces']['wan']['gateway'])) {
			$wangw_name = "WANGW";
		} else {
			$wangw_name = $config['interfaces']['wan']['gateway'];
		}
		if (is_array($config['gateways']['gateway_item']))
			foreach ($config['gateways']['gateway_item'] as $gw)
				if ($gw['name'] == $wangw_name || (!empty($config['wizardtemp']['wangateway']) && $gw['gateway'] == $config['wizardtemp']['wangateway']))
					$config['wizardtemp']['wangateway'] = $gw['gateway'];
		]]>
	</stepbeforeformdisplay>
	<stepsubmitphpaction>
		<![CDATA[
		if(!empty($_POST['mtu']) && ($_POST['mtu'] < 576)) {
			include("head.inc");
			$input_errors[] = "MTU Must be at least 576 (Per RFC 791). Please press back in the browser window and correct.";
			print_input_errors($input_errors);
			include("foot.inc");
			die;
		}
		if(!empty($_POST['macaddress']) && !is_macaddr($_POST['macaddress'])) {
			include("head.inc");
			$input_errors[] = "Invalid MAC Address. Please press back in the browser window and correct.";
			print_input_errors($input_errors);
			include("foot.inc");
			die;
		}
		if(!empty($_POST['ipaddress']) && ($_POST['selectedtype'] == "Static")) {
			if (!is_ipaddr($_POST['ipaddress'])) {
				include("head.inc");
				$input_errors[] = "Invalid WAN IP Address. Please press back in the browser window and correct.";
				print_input_errors($input_errors);
				include("foot.inc");
				die;
			}
			if ($_POST['subnetmask'] < 31 &&
			    ($_POST['ipaddress'] == gen_subnet($_POST['ipaddress'], $_POST['subnetmask']) ||
			     $_POST['ipaddress'] == gen_subnet_max($_POST['ipaddress'], $_POST['subnetmask']))) {
			    include("head.inc");
				$input_errors[] = "Invalid WAN IP Address. Please press back in the browser window and correct.";
				print_input_errors($input_errors);
				include("foot.inc");
				die;
			}
		}
		if(!empty($_POST['dhcphostname']) && !is_hostname($_POST['dhcphostname'])) {
			include("head.inc");
			$input_errors[] = "Invalid DHCP Hostname. Please press back in the browser window and correct.";
			print_input_errors($input_errors);
			include("foot.inc");
			die;
		}
		if(!empty($_POST['pptplocalipaddress']) && !is_ipaddr($_POST['pptplocalipaddress'])) {
		    include("head.inc");
			$input_errors[] = "Invalid PPTP Local IP Address. Please press back in the browser window and correct.";
			print_input_errors($input_errors);
			include("foot.inc");
			die;
		}
		if(!empty($_POST['pptpremoteipaddress']) && !is_ipaddr($_POST['pptpremoteipaddress'])) {
			include("head.inc");
			$input_errors[] = "Invalid PPTP Remote IP Address. Please press back in the browser window and correct.";
			print_input_errors($input_errors);
			include("foot.inc");
			die;
		}
		$type = $_POST['selectedtype'];

		if (!is_array($config['ppps']['ppp']))
			$config['ppps']['ppp'] = array();
		if (count($config['ppps']['ppp'])) {
			foreach ($config['ppps']['ppp'] as $pppid => $ppp) {
				if ($ppp['ptpid'] == "0") {
					if ((substr($config['interfaces']['wan']['if'],0,5) == "pppoe") || (substr($config['interfaces']['wan']['if'],0,4) == "pptp")) {
						$oldif = explode(",", $ppp['ports']);
						$config['interfaces']['wan']['if'] = $oldif[0];
					}
					if ($type == "pppoe" || $type == "pptp")
						unset($config['ppps']['ppp'][$pppid]);
				}
			}
		}

		if ($type == "pppoe" || $type == "pptp") {
			if ($type == "pptp") {
				$config['wizardtemp']['wan']['username'] = $config['wizardtemp']['wan']['pptpusername'];
				$config['wizardtemp']['wan']['password'] = $config['wizardtemp']['wan']['pptppassword'];
				$config['wizardtemp']['wan']['ondemand'] = $config['wizardtemp']['wan']['pptpondemand'];
				$config['wizardtemp']['wan']['idletimeout'] = $config['wizardtemp']['wan']['pptpidletimeout'];
				unset($config['wizardtemp']['wan']['pptpusername']);
				unset($config['wizardtemp']['wan']['pptppassword']);
				unset($config['wizardtemp']['wan']['pptpondemand']);
				unset($config['wizardtemp']['wan']['pptpidletimeout']);
			}
			$config['wizardtemp']['wan']['password'] = base64_encode($config['wizardtemp']['wan']['password']);
			$tmp = array();
			$tmp['ptpid'] = "0";
			$tmp['type'] = $type;
			$tmp['if'] = $type . "0";
			$tmp['ports'] = $config['interfaces']['wan']['if'];
			$config['ppps']['ppp'][] = array_merge($tmp, $config['wizardtemp']['wan']);
			unset($tmp);
			$config['interfaces']['wan']['if'] = $type."0";
		}
		unset($config['wizardtemp']['wan']);
		]]>
	</stepsubmitphpaction>
	<stepsubmitbeforesave>
		<![CDATA[
			if($_POST['selectedtype'] == "Static") {

			} else {
				$_POST['ipaddress'] = $_POST['selectedtype'];
				$config['interfaces']['wan']['ipaddr'] = $_POST['selectedtype'];
				write_config();
			}
			if(!$config['interfaces']['lan']) {
				header("Location: /wizard.php?xml=setup_wizard.xml&stepid=6&next=Next");
			}
		]]>
	</stepsubmitbeforesave>
</step>
<step>
	<id>6</id>
	<title>Configure LAN Interface</title>
	<description>On this screen the Local Area Network information will be configured.</description>
	<fields>
		<field>
			<name>LAN IP Address</name>
			<type>input</type>
			<bindstofield>interfaces->lan->ipaddr</bindstofield>
			<description>Type dhcp if this interface uses DHCP to obtain its IP address.</description>
			<validate>^(?:(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.){3}(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)$</validate>
			<message>LAN IP Address field is invalid</message>
		</field>
				<field>
			<name>Subnet Mask</name>
			<type>subnet_select</type>
			<bindstofield>interfaces->lan->subnet</bindstofield>
		</field>
		<field>
			<name>Next</name>
			<type>submit</type>
		</field>
	</fields>
	<stepsubmitphpaction>
		<![CDATA[
		if(empty($_POST['lanipaddress']) || !is_ipaddr($_POST['lanipaddress'])) {
			print_info_box("Invalid LAN IP address. Please press back in the browser window and correct.");
			die;
		}

		$lowestip = gen_subnet($_POST['lanipaddress'], $_POST['subnetmask']);
		$highestip = gen_subnet_max($_POST['lanipaddress'], $_POST['subnetmask']);

		if ($_POST['subnetmask'] < 31) {
			if ($_POST['lanipaddress'] == $lowestip) {
				include("head.inc");
				$input_errors[] = "LAN IP Address equals subnet network address. This is not allowed. Please press back in the browser window and correct.";
				print_input_errors($input_errors);
				include("foot.inc");
				die;
			}
			if ($_POST['lanipaddress'] == $highestip) {
				include("head.inc");
				$input_errors[] = "LAN IP Address equals subnet broadcast address. This is not allowed. Please press back in the browser window and correct.";
				print_input_errors($input_errors);
				include("foot.inc");
				die;
			}
		} else {
			include("head.inc");
			$input_errors[] = "Invalid subnet mask, choose a mask less than 31. Please press back in the browser window and correct.";
			print_input_errors($input_errors);
			include("foot.inc");
			die;
		}

		$ipaddresses_before = ip_range_size_v4($lowestip, $_POST['lanipaddress']);
		$ipaddresses_after = ip_range_size_v4($_POST['lanipaddress'], $highestip);

		if ($ipaddresses_after >= $ipaddresses_before) {
			// The LAN IP is in the 1st half of the subnet, so put DHCP in the 2nd half.
			if ($ipaddresses_after > 30) {
				// There is reasonable space in the subnet, use a smaller chunk of the space for DHCP
				// This case will work out like the old defaults if the user has specified the ".1" address.
				// The range will be something like ".10" to ".245"
				$config['dhcpd']['lan']['range']['from'] = ip_after($_POST['lanipaddress'], 9);
				$config['dhcpd']['lan']['range']['to'] = ip_before($highestip, 10);
			} else {
				// There is not much space in the subnet, so allocate everything above the LAN IP to DHCP.
				$config['dhcpd']['lan']['range']['from'] = ip_after($_POST['lanipaddress']);
				$config['dhcpd']['lan']['range']['to'] = ip_before($highestip);
			}
		} else {
			// The LAN IP is in the 2nd half of the subnet, so put DHCP in the 1st half.
			if ($ipaddresses_before > 30) {
				// There is reasonable space in the subnet, use a smaller chunk of the space for DHCP
				$config['dhcpd']['lan']['range']['from'] = ip_after($lowestip, 10);
				$config['dhcpd']['lan']['range']['to'] = ip_before($_POST['lanipaddress'], 9);
			} else {
				// There is not much space in the subnet, so allocate everything below the LAN IP to DHCP.
				$config['dhcpd']['lan']['range']['from'] = ip_after($lowestip);
				$config['dhcpd']['lan']['range']['to'] = ip_before($_POST['lanipaddress']);
			}
		}
		]]>
	</stepsubmitphpaction>
</step>
<step>
	<id>7</id>
	<title>Set Admin WebGUI Password</title>
	<description>On this screen the admin password will be set, which is used to access the WebGUI and also SSH services if enabled.</description>
	<fields>
		<field>
			<name>Admin Password</name>
			<type>password</type>
		</field>
		<field>
			<name>Admin Password AGAIN</name>
			<type>password</type>
		</field>
		<field>
			<name>Next</name>
			<type>submit</type>
		</field>
	</fields>
	<stepsubmitphpaction>
	<![CDATA[
	if($_POST['adminpassword'] != "") {
		if($_POST['adminpassword'] == $_POST['adminpasswordagain']) {
			$admin_user =& getUserEntryByUID(0);
			local_user_set_password($admin_user, $_POST['adminpassword']);
			local_user_set($admin_user);
			write_config();
		} else {
			print_info_box("Passwords do not match! Please press back in the browser window and correct.");
			die;
		}
	}
	]]>
	</stepsubmitphpaction>
</step>
<step>
	<id>8</id>
	<title>Reload configuration</title>
	<disableheader>true</disableheader>
	<description>Click 'Reload' to reload pfSense with new changes.</description>
	<fields>
		<field>
			<name>Reload</name>
			<type>submit</type>
		</field>
	</fields>
</step>
<step>
	<id>9</id>
	<title>Reload in progress</title>
	<description>
		A reload is now in progress.  Please wait. &lt;p&gt;
		&lt;meta http-equiv="refresh" content="5; url=wizard.php?xml=setup_wizard.xml&amp;stepid=9" &gt;
		&lt;p&gt;
		The wizard will redirect to the next step once the reload is completed.
	</description>
	<stepafterformdisplay>
		<![CDATA[
		$config['system']['hostname'] = $config['wizardtemp']['system']['hostname'];
		$config['system']['domain'] = $config['wizardtemp']['system']['domain'];
		if (!empty($config['wizardtemp']['wangateway'])) {
			if (!is_array($config['gateways']['gateway_item']))
				$config['gateways']['gateway_item'] = array();
			$found = false;
			$defaultgw_found = false;
			foreach ($config['gateways']['gateway_item'] as & $gw) {
				if ($gw['interface'] != "wan")
					continue;
				if (isset($gw['defaultgw']))
					$defaultgw_found = true;
				if ($gw['name'] == 'WANGW' || (!empty($config['wizardtemp']['wangateway']) && $gw['gateway'] == $config['wizardtemp']['wangateway'])) {
					$found = true;
					$gw['gateway'] = $config['wizardtemp']['wangateway'];
					$config['interfaces']['wan']['gateway'] = $gw['name'];
				}
			}
			if (!$found) {
				$newgw = array();
				$newgw['interface'] = "wan";
				$newgw['gateway'] = $config['wizardtemp']['wangateway'];
				$newgw['name'] = "WANGW";
				$newgw['weight'] = 1;
				$newgw['descr'] = "WAN Gateway";
				$newgw['defaultgw'] = !$defaultgw_found;
				$config['gateways']['gateway_item'][] = $newgw;
				$config['interfaces']['wan']['gateway'] = "WANGW";
			}
		}
		unset($config['wizardtemp']);
		write_config();
		reload_all();
		mwexec_bg("/etc/rc.update_bogons.sh now");
		]]>
	</stepafterformdisplay>
</step>
<step>
	<id>10</id>
	<title>Wizard completed.</title>
	<stepbeforeformdisplay>
	<![CDATA[
		if($g['product_name'] <> 'pfSense') {
			header("Location: " . fixup_string("\$myurl"));
			exit;
		}
	]]>
	</stepbeforeformdisplay>
	<description>
	<![CDATA[
		Congratulations!  pfSense is now configured.<p>
		Please consider contributing back to the project!</p><p>
		Click <a target='_blank' href='https://www.pfsense.org/get-involved/index.html'>here</a> to purchase services offered by the pfSense team and find other ways to contribute.</p><p>
		Click <a href='$myurl'>here</a> to continue on to pfSense webConfigurator.</p>
	]]>
	</description>
</step>
</pfsensewizard>