13 files changed, 911 insertions, 0 deletions
diff --git a/usr/sbin/pc-sysinstall/examples/Makefile b/usr/sbin/pc-sysinstall/examples/Makefile
new file mode 100644
index 0000000..5bb58c9
--- /dev/null
+++ b/usr/sbin/pc-sysinstall/examples/Makefile
@@ -0,0 +1,11 @@
+# $FreeBSD: src/usr.sbin/pc-sysinstall/examples/Makefile,v 1.1 2010/06/24 22:21:47 imp Exp $
+
+FILES=	README pc-autoinstall.conf pcinstall.cfg.fbsd-netinstall \
+	pcinstall.cfg.geli pcinstall.cfg.gmirror pcinstall.cfg.netinstall \
+	pcinstall.cfg.restore pcinstall.cfg.rsync pcinstall.cfg.upgrade \
+	pcinstall.cfg.zfs
+
+FILESDIR=${SHAREDIR}/examples/pc-sysinstall
+NO_OBJ=
+
+.include <bsd.prog.mk>
diff --git a/usr/sbin/pc-sysinstall/examples/README b/usr/sbin/pc-sysinstall/examples/README
new file mode 100644
index 0000000..20cb019
--- /dev/null
+++ b/usr/sbin/pc-sysinstall/examples/README
@@ -0,0 +1,355 @@
+pc-sysinstall README
+
+This file documents many of the variables used in pc-sysinstall
+config scripts
+#################################################################
+
+# hostname=
+
+Using hostname= will set the specified hostname on the
+installed system
+
+When hostname= is not present, pc-sysinstall will auto-generate
+a hostname such as freebsd-XXXX or pcbsd-XXXX
+
+# installMode=(fresh or upgrade)
+
+Set the type of install we are doing, fresh or upgrade.
+
+Fresh installs will format and mount the target disks before
+extracting the install images to the system. Using this mode
+it is also possible to do a system restore, by specifying a
+full system backup as the install source.
+
+Upgrades will mount the target disk, and extract the system
+archive to the disk, overwriting files on the disk. 
+The conf/exclude-from-upgrade file can be used to specify
+additional files to exclude from overwriting during the
+install process.
+
+# installInteractive=(yes or no)
+
+Set if the installer is running in interactive mode, and
+is able to prompt for input from the user, defaults to no
+
+
+########################################################################
+# NETWORK SETTINGS
+########################################################################
+
+# netDev=(AUTO-DHCP or <nic>)
+
+netDev specifies what type of networking to enable for the installer
+Can be set to AUTO-DHCP or to a network interface, such as et0
+
+When set to AUTO-DHCP, pc-sysinstall will probe for all network devices
+and attempt to set DHCP mode on each, until a working network connection
+is established
+
+If netDev= is set to a network interface such as et0, the following options
+will need to be set in order to enable the interface
+
+# netIP=(IP address such as 192.168.0.100)
+
+ Set netIP to an address that you wish to have the interface specified in
+ netDev set to
+ Only used when netDev is not set to AUTO-DHCP
+
+# netMask=(Netmask such as 255.255.255.0)
+
+Set netMask to the address you with to have the interface specified in
+netDev set to
+Only used when netDev is not set to AUTO-DHCP
+
+ 
+# netNameServer=(DNS Server such as 192.168.0.1)
+
+Set netNameServer to the DNS address you want to use during the install
+Only used when netDev is not set to AUTO-DHCP
+
+
+# netDefaultRouter=(192.168.0.1)
+
+Set netDefaultRouter to the gateway you wish to have the installer use
+Only used when netDev is not set to AUTO-DHCP
+
+
+
+# netSaveDev=(AUTO-DHCP or network interface)
+
+netSaveDev specifies what networking to enable on the installed system
+
+When set to AUTO-DHCP, pc-sysinstall will probe all network interfaces, and
+set them all to DHCP in the systems /etc/rc.conf file. Wireless devices will also
+have the corresponding wlan[0-9] device created. 
+
+When set to a network interface, pc-sysinstall will set the target device with
+the settings specified by the variables below.
+
+# netSaveIP=192.168.0.49
+# netSaveMask=255.255.255.0
+# netSaveNameServer=208.67.222.222
+# netSaveDefaultRouter=192.168.0.1
+
+
+
+
+########################################################################
+# DISK SLICE SETTINGS
+########################################################################
+
+The following section specifies the target disk(s) to be used in the
+install or upgrade. 
+
+# disk0=(disk device, such as ad0)
+
+The diskX= variable should be set to the target device for this drive, such
+as ad0, da0
+The first should begin with disk0=, and additional drives to disk1=, disk2
+if additional disks are to be setup. 
+
+When doing an upgrade, the disk0= line should be set to the root device or 
+root zpool of the target system to update. I.E:
+ # disk0=tank0
+ # disk0=ada0s1a
+
+
+# partition=(all, free, s1, s1, s3, s4)
+
+After setting disk[0-9], the partition= variable is used to specify which target
+partition we will be working with for this device.
+
+Setting this to "all" will setup the disk with a single FreeBSD slice as "s1"
+
+Setting this to "free" will allow pc-sysinstall to search for the first available
+primary slice with free space, and create the slice. 
+
+Setting this to "s1, s2, s3 or s4" will use the specified MBR slice
+
+(This tag is unused for upgrades)
+
+
+# mirror=(disk device such as ad1)
+
+Setting the mirror= variable will setup the target device as a gmirror
+of the diskX= device. The mirror device must be the same size or larger
+than the drive being mirrored. 
+ 
+
+# mirrorbal=(load, prefer, round-robin, split)
+
+Allows the setting of the mirror balance method to be used, if not
+specified this defaults to "round-robin"
+
+# bootManager=(none, bsd)
+
+Setting this option will instruct pc-sysinstall to install the BSD boot Manager,
+or leave it empty
+
+# commitDiskPart
+
+This command must be placed at the end of the diskX= section, before starting
+the listing of any additional diskX= directives. 
+
+
+########################################################################
+# DISK PARTITION / MOUNT SETTINGS
+########################################################################
+
+The following settings specify the partitioning / mount points to setup
+on the target partition
+
+# disk0-part=UFS+S 500 / 
+# disk0-part=SWAP 2000 none
+# disk0-part=UFS.eli 500 /usr
+# encpass=mypass
+# disk0-part=UFS+J 500 /tmp
+# disk0-part=ZFS 0 /data,/storage (mirror: ad1)
+# commitDiskLabel
+
+The above values instructs pc-sysinstall which partitions / mounts
+to create on the target drive / slice, specified by "disk0".
+(disk0 will resolve to the drive / slice specified in the previous section)
+
+The notation is as follows:
+<File System Type> <Size> <Mountpoint>
+
+Available FileSystems: 
+  UFS - Standard UFS2 FileSystem
+UFS+S - UFS2 + Softupdates enabled
+UFS+J - UFS2 + Journaling through gjournal
+  ZFS - Z File System, pools / mounts created automatically
+ SWAP - BSD Swap space partition, mountpoint should be set to "none"
+
+Adding the ".eli" extension to any of the above file systems
+will enable disk encryption via geli
+(UFS.eli, UFS+S.eli, UFS+J.eli, ZFS.eli, SWAP.eli)
+
+If you with to use a passphrase with this encrypted partition, on the next line
+the flag "encpass=" should be entered:
+encpass=mypass
+
+All sizes are expressed in MegaBytes
+Specifying a size 0 instructs pc-sysinstall to use the rest of the 
+available slice size, and should only be used for the last partition / mount
+
+When using "ZFS" specifically, it is possible to specify additional disks / partitions
+to include in the zpool. By using the syntax: (mirror: ad1,ad2) or (raidz: ad1,ad2), it is possible
+to include the disk "ad1" into the zpool for this partition, using the raidz / mirror methods.
+If you with to just include the disk into the pool in "basic" mode, then use (ad1,ad2) with no flags
+
+########################################################################
+# INSTALL OPTIONS / SOURCES
+########################################################################
+
+The following settings specify the type, locations and sources
+for this installation
+
+# installMedium=(dvd, usb, ftp, rsync)
+
+Set installMedium= to the source type we will be using for this install.
+
+Available Types:
+  dvd - Search for and mount the DVD which contains the install archive
+  usb - Search for and mount the USB drive which contains the install archive
+  ftp - The install archive will be fetched from a FTP / HTTP server before install
+rsync - Pull the system data from a ssh + rsync server, specified with variables below
+
+# installType=(PCBSD, FreeBSD)
+
+Set the type of system we are installing, PCBSD or FreeBSD
+
+# installFile=fbsd-release.tbz
+
+The installer archive, if not using the defaults specified in conf/pc-sysinstall.conf
+
+# packageType=(tar, uzip, split)
+
+The archive type we are extracting from when using dvd, usb or ftp
+
+# ftpPath=ftp://ftp.pcbsd.org/pub/8.0/netinstall
+
+Location of the installer archive when using a installMedium=ftp
+
+# rsyncPath=life-preserver/back-2009-11-12T14_53_14
+
+The location of the rsync data on the remote server when using installMedium=rsync
+
+# rsyncUser=rsyncuser
+
+The username to use for the ssh server running rsync
+
+# rsyncHost=192.168.0.50
+
+The rsync / ssh server we wish to connect to
+
+# rsyncPort=22
+
+The port to use when connecting to a ssh + rsync server
+
+# installComponents=amarok,firefox,ports
+
+The specified components to install, view available with "./pc-sysinstall list-components"
+
+
+########################################################################
+# UPGRADE OPTIONS
+########################################################################
+
+Options specific to performing an upgrade
+
+# upgradeKeepDesktopProfile=(yes/no)
+
+This option allows you to specify if you wish to keep your existing users desktop
+profile data. The default is NO, and your existing profile will be moved to 
+.kde4.preUpgrade automatically. 
+
+########################################################################
+# USER OPTIONS
+########################################################################
+
+Options for setting up usernames and passwords on the installed system
+
+# rootPass=root
+
+Set the root password of the installed system to the specified string
+
+The below variables are used to setup a user on the installed system
+Be sure to call commitUser after after adding these values, and before
+starting another user block
+
+# userName=kris
+# userComment=Kris Moore
+# userPass=mypass
+# userShell=/bin/csh
+# userHome=/home/kris
+# userGroups=wheel,operator
+# commitUser
+
+########################################################################
+# RUN COMMANDS
+########################################################################
+
+The following variables can be set to run commands post-installation,
+allowing the user to further tweak / modify the system
+
+# runCommand=
+
+Run the specified command within chroot of the installed system
+
+# runScript=
+
+runScript will copy the specified script into FSMNT, and run it in chroot of the system
+Usefull when you have a 3rd party script on the DVD / USB, and you want to copy it into
+the installed system and run
+
+# runExtCommand=
+
+runExtCommand is used when you wish to run a command outside the chroot
+The variable $FSMNT is set to the mount-point of your installed system
+
+
+########################################################################
+# PC-BSD SPECIFC OPTIONS
+########################################################################
+
+Options for time-zones and NTP on the installed system
+
+# timeZone=
+
+timeZone can be set to the zone file in /usr/share/zoneinfo/ that is to be used
+example: America/New_York
+
+# enableNTP= (yes / no)
+
+set enableNTP to yes or no to enable or disable the NTP service on the system
+
+
+########################################################################
+# PC-BSD SPECIFC OPTIONS
+########################################################################
+
+Options specific to installing PC-BSD, such as localization, and KDE settings
+
+# localizeLang=en
+
+localizeLang will set the system console and Desktop to the target language
+
+# localizeKeyLayout=en
+
+localizeKeyLayout updates the system's xorg config to set the keyboard layout
+
+# localizeKeyModel=pc104
+
+localizeKeyModel updates the system's xorg config to set the keyboard model
+
+# localizeKeyVariant=intl
+
+localizeKeyVariant is used to update the xorg config to set the keyboard variant
+
+# autoLoginUser=kris
+
+Setting autoLoginUser will enable the specified user to log into the desktop 
+automatically without entering a password
+
+$FreeBSD: src/usr.sbin/pc-sysinstall/examples/README,v 1.1 2010/06/24 22:21:47 imp Exp $
diff --git a/usr/sbin/pc-sysinstall/examples/pc-autoinstall.conf b/usr/sbin/pc-sysinstall/examples/pc-autoinstall.conf
new file mode 100644
index 0000000..260fc68
--- /dev/null
+++ b/usr/sbin/pc-sysinstall/examples/pc-autoinstall.conf
@@ -0,0 +1,52 @@
+# pc-autoinstall.conf example
+# $FreeBSD: src/usr.sbin/pc-sysinstall/examples/pc-autoinstall.conf,v 1.1 2010/06/24 22:21:47 imp Exp $
+#
+# Usage: Modify these variables, and copy the file to 
+# /boot/pc-autoinstall.conf on your PC-BSD installation medium
+#
+# The conf will then be read at bootup, and your automated
+# install will take place
+##################################################################
+
+# Where the pc-sysinstall main config is located
+# Can be either a file on the booted CD / DVD / USB media, 
+# or a remote file on http / ftp
+#
+# The value %%NIC_MAC%% is special, and will be substituted with 
+# the macaddress of the enabled NIC from DHCP or manually set
+# with 'nic_config:'
+##################################################################
+
+# Examples:
+# pc_config: ftp://192.168.0.2/cust-install.cfg
+# pc_config: http://192.168.0.2/cust-install.cfg
+# pc_config: http://192.168.0.2/%%NIC_MAC%%.cfg
+# pc_config: /boot/cust-install.cfg
+
+# Set this to yes if we should confirm before doing an install
+# This should normally be set to yes, otherwise booting the wrong
+# disk will result in a system wipe
+# confirm_install: no 
+confirm_install: yes
+
+# Set the command to run post-install, usually best to run shutdown
+# but this can be replaced with any other command / script you wish
+# to execute post-install
+# shutdown_cmd: shutdown -p now
+
+# Options for the network setup, should the cfg need to be fetched
+# from a remote location, only necessary when using ftp or http
+##################################################################
+
+# Special option, will attempt dhcp on all found NICs
+# until the file can be fetched, or we run out of interfaces
+# nic_config: dhcp-all
+
+# Line to be passed to the "ifconfig" command to bring up an interface
+# nic_config: em0 192.168.0.101 255.255.255.0
+
+# DNS server to use
+# nic_dns: 192.168.0.1
+
+# Default router / gateway
+# nic_gateway: 192.168.0.1
diff --git a/usr/sbin/pc-sysinstall/examples/pcinstall.cfg.fbsd-netinstall b/usr/sbin/pc-sysinstall/examples/pcinstall.cfg.fbsd-netinstall
new file mode 100644
index 0000000..dad3be6
--- /dev/null
+++ b/usr/sbin/pc-sysinstall/examples/pcinstall.cfg.fbsd-netinstall
@@ -0,0 +1,71 @@
+# Sample configuration file for an installation using pc-sysinstall
+#$FreeBSD: src/usr.sbin/pc-sysinstall/examples/pcinstall.cfg.fbsd-netinstall,v 1.1 2010/06/24 22:21:47 imp Exp $
+
+installMode=fresh
+installInteractive=yes
+hostname=pcbsd8
+
+# Set the disk parameters
+disk0=ad0
+partition=all
+bootManager=none
+commitDiskPart
+
+# Setup the disk label
+# All sizes are expressed in MB
+# Avail FS Types, UFS, UFS+S, UFS+J, ZFS, SWAP
+disk0-part=UFS 1000 / 
+disk0-part=SWAP 2000 none
+disk0-part=UFS 0 /usr
+# Size 0 means use the rest of the slice size
+# Do it now!
+commitDiskLabel
+
+netDev=AUTO-DHCP
+#netDev=nfe0
+#netIP=192.168.0.49
+#netMask=255.255.255.0
+#netNameServer=208.67.222.222
+#netDefaultRouter=192.168.0.1
+
+netSaveDev=AUTO-DHCP
+#netSaveDev=nfe0
+#netSaveIP=192.168.0.49
+#netSaveMask=255.255.255.0
+#netSaveNameServer=208.67.222.222
+#netSaveDefaultRouter=192.168.0.1
+
+# Set if we are installing via optical, USB, or FTP
+#installType=PCBSD
+installType=FreeBSD
+#installMedium=dvd
+installMedium=ftp
+
+ftpPath=ftp://192.168.0.2/netinstall
+
+#packageType=uzip
+packageType=tar
+
+# List our components to install
+installComponents=ports,src
+
+# Setup user "kris" to log into the desktop automatically
+autoLoginUser=kris
+
+# Set the root pass
+rootPass=root
+
+# Setup our users
+userName=kris
+userComment=Kris Moore
+userPass=kris
+userShell=/bin/csh
+userHome=/home/kris
+userGroups=wheel,operator
+commitUser
+
+# Options for localizing an install
+localizeLang="ru"
+localizeKeyLayout="ru"
+localizeKeyModel="pc104"
+localizeKeyVariant="intl"
diff --git a/usr/sbin/pc-sysinstall/examples/pcinstall.cfg.geli b/usr/sbin/pc-sysinstall/examples/pcinstall.cfg.geli
new file mode 100644
index 0000000..b20a65d
--- /dev/null
+++ b/usr/sbin/pc-sysinstall/examples/pcinstall.cfg.geli
@@ -0,0 +1,50 @@
+# Auto-Generated pc-sysinstall configuration
+#$FreeBSD: src/usr.sbin/pc-sysinstall/examples/pcinstall.cfg.geli,v 1.1 2010/06/24 22:21:47 imp Exp $
+
+installInteractive=no
+installMode=fresh
+installType=FreeBSD
+packageType=tar
+installMedium=dvd
+netSaveDev=AUTO-DHCP
+
+# Timezone
+timeZone=America/New_York
+enableNTP=yes
+
+# Keyboard Layout Options
+localizeKeyModel=pc104
+localizeKeyLayout=us
+ 
+# Disk Setup for ad0
+disk0=ad0
+partition=ALL
+bootManager=none
+commitDiskPart
+
+# Partition Setup for ad0(ALL)
+# All sizes are expressed in MB
+# Avail FS Types, UFS, UFS+S, UFS+J, ZFS, SWAP
+# UFS.eli, UFS+S.eli, UFS+J.eli, ZFS.eli, SWAP.eli
+disk0-part=UFS 500 /boot
+disk0-part=UFS.eli 500 /
+disk0-part=UFS.eli 500 /usr
+encpass=mypass
+commitDiskLabel
+
+# Optional Components
+installComponents=
+
+# Root Password
+rootPass=mypass
+
+# Users
+userName=kris
+userComment=Kris Moore
+userPass=mypass
+userShell=/bin/csh
+userHome=/home/kris
+userGroups=wheel,operator
+autoLoginUser=kris
+commitUser
+
diff --git a/usr/sbin/pc-sysinstall/examples/pcinstall.cfg.gmirror b/usr/sbin/pc-sysinstall/examples/pcinstall.cfg.gmirror
new file mode 100644
index 0000000..6a20d23
--- /dev/null
+++ b/usr/sbin/pc-sysinstall/examples/pcinstall.cfg.gmirror
@@ -0,0 +1,45 @@
+# Sample configuration file for an installation using pc-sysinstall
+#$FreeBSD: src/usr.sbin/pc-sysinstall/examples/pcinstall.cfg.gmirror,v 1.1 2010/06/24 22:21:47 imp Exp $
+
+installMode=fresh
+installInteractive=yes
+hostname=pcbsd8
+
+# Set the disk parameters
+disk0=ad0
+mirror=ad1
+mirrorbal=split
+partition=all
+bootManager=bsd
+commitDiskPart
+
+# Setup the disk label
+# All sizes are expressed in MB
+# Avail FS Types, UFS, UFS+S, UFS+J, ZFS, SWAP
+disk0-part=UFS+S 500 / 
+disk0-part=SWAP 2000 none
+disk0-part=UFS+S 0 /usr
+# Size 0 means use the rest of the slice size
+# Do it now!
+commitDiskLabel
+
+# Set if we are installing via optical, USB, or FTP
+installType=FreeBSD
+installMedium=dvd
+
+#packageType=uzip
+packageType=tar
+#installComponents=ports,src
+
+# Run any commands post-install
+runCommand=echo 'root' | pw usermod root -h 0
+#runScript=/root/test.sh
+#runExtCommand=echo 'hey there'; touch $FSMNT/touched
+
+#autoLoginUser=kris
+
+# Options for localizing an install
+localizeLang="ru"
+localizeKeyLayout="ru"
+localizeKeyModel="pc104"
+localizeKeyVariant="intl"
diff --git a/usr/sbin/pc-sysinstall/examples/pcinstall.cfg.netinstall b/usr/sbin/pc-sysinstall/examples/pcinstall.cfg.netinstall
new file mode 100644
index 0000000..a2c8222
--- /dev/null
+++ b/usr/sbin/pc-sysinstall/examples/pcinstall.cfg.netinstall
@@ -0,0 +1,68 @@
+# Sample configuration file for an installation using pc-sysinstall
+#$FreeBSD: src/usr.sbin/pc-sysinstall/examples/pcinstall.cfg.netinstall,v 1.1 2010/06/24 22:21:47 imp Exp $
+
+installMode=fresh
+installInteractive=yes
+hostname=pcbsd8
+
+# Set the disk parameters
+disk0=ad0
+partition=all
+bootManager=none
+commitDiskPart
+
+# Setup the disk label
+# All sizes are expressed in MB
+# Avail FS Types, UFS, UFS+S, UFS+J, ZFS, SWAP
+disk0-part=UFS 1000 / 
+disk0-part=SWAP 2000 none
+disk0-part=UFS 0 /usr
+# Size 0 means use the rest of the slice size
+# Do it now!
+commitDiskLabel
+
+netDev=AUTO-DHCP
+#netDev=nfe0
+#netIP=192.168.0.49
+#netMask=255.255.255.0
+#netNameServer=208.67.222.222
+#netDefaultRouter=192.168.0.1
+
+netSaveDev=AUTO-DHCP
+#netSaveDev=nfe0
+#netSaveIP=192.168.0.49
+#netSaveMask=255.255.255.0
+#netSaveNameServer=208.67.222.222
+#netSaveDefaultRouter=192.168.0.1
+
+# Set if we are installing via optical, USB, or FTP
+#installType=PCBSD
+installType=FreeBSD
+#installMedium=dvd
+installMedium=ftp
+
+ftpPath=ftp://192.168.0.2/netinstall
+
+#packageType=uzip
+packageType=tar
+#installComponents=ports,src
+
+#autoLoginUser=kris
+
+# Set the root pass
+rootPass=root
+
+# Setup our users
+userName=kris
+userComment=Kris Moore
+userPass=kris
+userShell=/bin/csh
+userHome=/home/kris
+userGroups=wheel,operator
+commitUser
+
+# Options for localizing an install
+localizeLang="ru"
+localizeKeyLayout="ru"
+localizeKeyModel="pc104"
+localizeKeyVariant="intl"
diff --git a/usr/sbin/pc-sysinstall/examples/pcinstall.cfg.restore b/usr/sbin/pc-sysinstall/examples/pcinstall.cfg.restore
new file mode 100644
index 0000000..c05bf05
--- /dev/null
+++ b/usr/sbin/pc-sysinstall/examples/pcinstall.cfg.restore
@@ -0,0 +1,57 @@
+# Sample configuration file for an installation using pc-sysinstall
+#$FreeBSD: src/usr.sbin/pc-sysinstall/examples/pcinstall.cfg.restore,v 1.1 2010/06/24 22:21:47 imp Exp $
+
+installMode=fresh
+installInteractive=no
+hostname=freebsd8
+
+# Set the disk parameters
+disk0=ad1
+partition=all
+bootManager=none
+commitDiskPart
+
+# Setup the disk label
+# All sizes are expressed in MB
+# Avail FS Types, UFS, UFS+S, UFS+J, ZFS, SWAP
+# UFS.eli, UFS+S.eli, UFS+J.eli, ZFS.eli, SWAP.eli
+disk0-part=UFS+S 500 /
+disk0-part=SWAP.eli 2000 none
+disk0-part=UFS+S 0 /usr
+# Size 0 means use the rest of the slice size
+# Do it now!
+commitDiskLabel
+
+# Set if we are installing via optical, USB, or FTP
+installType=FreeBSD
+installMedium=dvd
+installFile=freebsd-release.tbz
+
+#packageType=uzip
+packageType=tar
+#installComponents=ports,src
+
+# Run any commands post-install
+#runCommand=echo 'root' | pw usermod root -h 0
+#runScript=/root/test.sh
+#runExtCommand=echo 'hey there'; touch $FSMNT/touched
+
+# Set the root pass
+rootPass=root
+
+# Setup our users
+userName=kris
+userComment=Kris Moore
+userPass=kris
+userShell=/bin/csh
+userHome=/home/kris
+userGroups=wheel,operator
+commitUser
+
+#autoLoginUser=kris
+
+# Options for localizing an install
+localizeLang="ru"
+localizeKeyLayout="ru"
+localizeKeyModel="pc104"
+localizeKeyVariant="intl"
diff --git a/usr/sbin/pc-sysinstall/examples/pcinstall.cfg.rsync b/usr/sbin/pc-sysinstall/examples/pcinstall.cfg.rsync
new file mode 100644
index 0000000..e6d7c6c
--- /dev/null
+++ b/usr/sbin/pc-sysinstall/examples/pcinstall.cfg.rsync
@@ -0,0 +1,45 @@
+# Sample configuration file for an installation using pc-sysinstall
+#$FreeBSD: src/usr.sbin/pc-sysinstall/examples/pcinstall.cfg.rsync,v 1.1 2010/06/24 22:21:47 imp Exp $
+
+installMode=fresh
+installInteractive=yes
+hostname=pcbsd8
+
+# Set the disk parameters
+disk0=ad0
+partition=all
+bootManager=none
+commitDiskPart
+
+# Setup the disk label
+# All sizes are expressed in MB
+# Avail FS Types, UFS, UFS+S, UFS+J, ZFS, SWAP
+disk0-part=UFS 2000 / 
+disk0-part=SWAP 2000 none
+disk0-part=UFS 0 /usr
+# Size 0 means use the rest of the slice size
+# Do it now!
+commitDiskLabel
+
+netDev=AUTO-DHCP
+#netDev=nfe0
+#netIP=192.168.0.49
+#netMask=255.255.255.0
+#netNameServer=208.67.222.222
+#netDefaultRouter=192.168.0.1
+
+# Set if we are installing via optical, USB, or FTP
+#installType=PCBSD
+installType=FreeBSD
+#installMedium=dvd
+installMedium=rsync
+
+rsyncPath=life-preserver/back-2009-11-12T14_53_14
+rsyncUser=lifep
+rsyncHost=192.168.0.50
+rsyncPort=22
+
+#packageType=uzip
+packageType=tar
+#installComponents=ports,src
+
diff --git a/usr/sbin/pc-sysinstall/examples/pcinstall.cfg.upgrade b/usr/sbin/pc-sysinstall/examples/pcinstall.cfg.upgrade
new file mode 100644
index 0000000..754f05f
--- /dev/null
+++ b/usr/sbin/pc-sysinstall/examples/pcinstall.cfg.upgrade
@@ -0,0 +1,24 @@
+# Sample configuration file for an installation using pc-sysinstall
+#$FreeBSD: src/usr.sbin/pc-sysinstall/examples/pcinstall.cfg.upgrade,v 1.1 2010/06/24 22:21:47 imp Exp $
+
+installMode=upgrade
+installInteractive=no
+hostname=freebsd8
+
+# Set the disk parameters
+disk0=ada0s1a
+bootManager=none
+commitDiskPart
+
+# Set if we are installing via optical, USB, or FTP
+installType=PCBSD
+installMedium=dvd
+
+packageType=uzip
+#installComponents=ports,src
+
+# Options for localizing an install
+localizeLang="ru"
+localizeKeyLayout="ru"
+localizeKeyModel="pc104"
+localizeKeyVariant="intl"
diff --git a/usr/sbin/pc-sysinstall/examples/pcinstall.cfg.zfs b/usr/sbin/pc-sysinstall/examples/pcinstall.cfg.zfs
new file mode 100644
index 0000000..11dd38a
--- /dev/null
+++ b/usr/sbin/pc-sysinstall/examples/pcinstall.cfg.zfs
@@ -0,0 +1,59 @@
+# Auto-Generated pc-sysinstall configuration
+#$FreeBSD: src/usr.sbin/pc-sysinstall/examples/pcinstall.cfg.zfs,v 1.1 2010/06/24 22:21:47 imp Exp $
+installInteractive=no
+installMode=fresh
+installType=FreeBSD
+packageType=tar
+installMedium=dvd
+netSaveDev=AUTO-DHCP
+
+# Timezone
+timeZone=America/New_York
+enableNTP=yes
+
+# Keyboard Layout Options
+localizeKeyModel=pc104
+localizeKeyLayout=us
+ 
+# Disk Setup for ad0
+disk0=ad0
+partition=ALL
+bootManager=none
+commitDiskPart
+
+# Partition Setup for ad0(ALL)
+# All sizes are expressed in MB
+# Avail FS Types, UFS, UFS+S, UFS+J, ZFS, SWAP
+# UFS.eli, UFS+S.eli, UFS+J.eli, ZFS.eli, SWAP.eli
+disk0-part=ZFS 0 /,/usr,/var,/data (mirror: ad1)
+commitDiskLabel
+
+# Disk Setup for ad3
+disk1=ad3
+partition=ALL
+bootManager=none
+commitDiskPart
+
+# Partition Setup for ad3(ALL)
+# All sizes are expressed in MB
+# Avail FS Types, UFS, UFS+S, UFS+J, ZFS, SWAP
+# UFS.eli, UFS+S.eli, UFS+J.eli, ZFS.eli, SWAP.eli
+disk1-part=SWAP 0 none
+commitDiskLabel
+
+# Optional Components
+installComponents=
+
+# Root Password
+rootPass=mypass
+
+# Users
+userName=kris
+userComment=Kris Moore
+userPass=mypass
+userShell=/bin/csh
+userHome=/home/kris
+userGroups=wheel,operator
+autoLoginUser=kris
+commitUser
+
diff --git a/usr/sbin/pc-sysinstall/examples/pfSense.cfg b/usr/sbin/pc-sysinstall/examples/pfSense.cfg
new file mode 100644
index 0000000..9cb6d6b
--- /dev/null
+++ b/usr/sbin/pc-sysinstall/examples/pfSense.cfg
@@ -0,0 +1,30 @@
+# Sample configuration file for an installation using pc-sysinstall
+
+installMode=fresh
+installInteractive=yes
+installType=FreeBSD
+installMedium=LiveCD
+
+# Set the disk parameters
+disk0=ad0
+partition=all
+bootManager=bsd
+commitDiskPart
+
+# Setup the disk label
+# All sizes are expressed in MB
+# Avail FS Types, UFS, UFS+S, UFS+J, ZFS, SWAP
+# Size 0 means use the rest of the slice size
+disk0-part=UFS+S 0 / 
+# Do it now!
+commitDiskLabel
+
+# Set if we are installing via optical, USB, or FTP
+installType=FreeBSD
+
+packageType=cpdup
+
+# Optional Components
+cpdupPaths=boot,COPYRIGHT,bin,conf,conf.default,dev,etc,home,kernels,libexec,lib,root,sbin,sys,usr,var
+
+runExtCommand=chmod a+rx /usr/local/bin/after_installation_routines.sh && cd / && /usr/local/bin/after_installation_routines.sh
diff --git a/usr/sbin/pc-sysinstall/examples/pfSense.cfg.zfs b/usr/sbin/pc-sysinstall/examples/pfSense.cfg.zfs
new file mode 100644
index 0000000..5976cb5
--- /dev/null
+++ b/usr/sbin/pc-sysinstall/examples/pfSense.cfg.zfs
@@ -0,0 +1,44 @@
+# Auto-Generated pc-sysinstall configuration
+installInteractive=no
+installMode=fresh
+installType=FreeBSD
+installMedium=LiveCD
+packageType=cpdup
+
+# Timezone
+timeZone=Kentucky/Louisville
+
+# Keyboard Layout Options
+localizeKeyModel=pc104
+localizeKeyLayout=us
+ 
+# Disk Setup for ad0
+disk0=da0
+partition=ALL
+bootManager=none
+commitDiskPart
+
+# Partition Setup for da0(ALL)
+# All sizes are expressed in MB
+# Avail FS Types, UFS, UFS+S, UFS+J, ZFS, SWAP
+# UFS.eli, UFS+S.eli, UFS+J.eli, ZFS.eli, SWAP.eli
+disk0-part=ZFS 0 / (mirror: da2)
+commitDiskLabel
+
+# Disk Setup for da2
+disk1=da2
+partition=ALL
+bootManager=none
+commitDiskPart
+
+# Partition Setup for da2(ALL)
+# All sizes are expressed in MB
+# Avail FS Types, UFS, UFS+S, UFS+J, ZFS, SWAP
+# UFS.eli, UFS+S.eli, UFS+J.eli, ZFS.eli, SWAP.eli
+disk1-part=SWAP 0 none
+commitDiskLabel
+
+# Optional Components
+cpdupPaths=boot,COPYRIGHT,bin,conf,conf.default,dev,etc,home,kernels,libexec,lib,root,sbin,sys,usr,var
+
+runExtCommand=chmod a+rx /usr/local/bin/after_installation_routines.sh && cd / && /usr/local/bin/after_installation_routines.sh