diff options
author | Scott Ullrich <sullrich@pfsense.org> | 2010-08-14 21:12:05 -0400 |
---|---|---|
committer | Scott Ullrich <sullrich@pfsense.org> | 2010-08-14 21:12:05 -0400 |
commit | 5a69cb0659dae2bfb481c31a6c57ff4f829225ac (patch) | |
tree | 00f6cf60aa9c11a0972c1f970abc7e0edad5e40d /usr/sbin/pc-sysinstall/doc/help-start-autoinstall | |
parent | 3fcc3999dacb8e92d22fa68922a0cb07141c481d (diff) | |
download | pfsense-5a69cb0659dae2bfb481c31a6c57ff4f829225ac.zip pfsense-5a69cb0659dae2bfb481c31a6c57ff4f829225ac.tar.gz |
Sync pc-sysinstall with FreeBSD-CURRENT and remove old /PCBSD version. Change installer.php to match new path
Diffstat (limited to 'usr/sbin/pc-sysinstall/doc/help-start-autoinstall')
-rw-r--r-- | usr/sbin/pc-sysinstall/doc/help-start-autoinstall | 39 |
1 files changed, 39 insertions, 0 deletions
diff --git a/usr/sbin/pc-sysinstall/doc/help-start-autoinstall b/usr/sbin/pc-sysinstall/doc/help-start-autoinstall new file mode 100644 index 0000000..1cb1e6a --- /dev/null +++ b/usr/sbin/pc-sysinstall/doc/help-start-autoinstall @@ -0,0 +1,39 @@ +start-autoinstall - HELP +----------------------------------------------- + +About: + start-autoinstall is used when performing automated installationsr. It is able + to configure networking with provided settings, and fetch an installation script from + http / ftp server. This allows media to be created which fetches dynamic configuration + options from a server-side supplier. + +Usage: + pc-sysinstall start-autoinstall <config> + +Config Syntax: + + The configuration file for start-autoinstall can contain the following options: + + pc_config: <value> + - Location of the pc-sysinstall installation configuration file, can be local + or start with http:// or ftp:// to fetch from a remote system. + + shutdown_cmd: <value> + - Command to execute post-installation, such as "shutdown -p now" or other. + + confirm_install: (YES/NO) + - Prompt on the console to begin installation. Defaults to YES. + Warning: Setting this to NO will start an installation as soon as start-autoinstall + is run. (I.E. after booting some install media) It may be dangerous if a disk is left + in a drive and the system is turned on! + + nic_config: (DHCP-ALL / <cfg>) + - When set to DHCP-ALL, the software will attempt to get a network address from DHCP on + any / all detected NICS. If set to some other command, it will be used as an argument + to "ifconfig" to enable networking. + + nic_dns: <value> + - Use the following DNS server for networking + + nic_gateway: <gateway> + - Use the following default route / gateway for networking |