Retire diag_nanobsd.php

4 files changed, 0 insertions, 263 deletions

diff --git a/src/etc/inc/priv.defs.inc b/src/etc/inc/priv.defs.inc
index 8deb4d7..60e8db0 100644
--- a/src/etc/inc/priv.defs.inc
+++ b/src/etc/inc/priv.defs.inc
@@ -105,12 +105,6 @@ $priv_list['page-diagnostics-limiter-info']['descr'] = gettext("Allows access to
 $priv_list['page-diagnostics-limiter-info']['match'] = array();
 $priv_list['page-diagnostics-limiter-info']['match'][] = "diag_limiter_info.php*";
 
-$priv_list['page-diagnostics-nanobsd'] = array();
-$priv_list['page-diagnostics-nanobsd']['name'] = gettext("WebCfg - Diagnostics: NanoBSD");
-$priv_list['page-diagnostics-nanobsd']['descr'] = gettext("Allow access to the 'Diagnostics: NanoBSD' page.");
-$priv_list['page-diagnostics-nanobsd']['match'] = array();
-$priv_list['page-diagnostics-nanobsd']['match'][] = "diag_nanobsd.php*";
-
 $priv_list['page-diagnostics-ndptable'] = array();
 $priv_list['page-diagnostics-ndptable']['name'] = gettext("WebCfg - Diagnostics: NDP Table");
 $priv_list['page-diagnostics-ndptable']['descr'] = gettext("Allow access to the 'Diagnostics: NDP Table' page.");
diff --git a/src/usr/local/www/diag_nanobsd.php b/src/usr/local/www/diag_nanobsd.php
deleted file mode 100644
index c8806bc..0000000
--- a/src/usr/local/www/diag_nanobsd.php
+++ /dev/null
@@ -1,252 +0,0 @@
-<?php
-/*
- * diag_nanobsd.php
- *
- * part of pfSense (https://www.pfsense.org)
- * Copyright (c) 2004-2016 Rubicon Communications, LLC (Netgate)
- * All rights reserved.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-##|+PRIV
-##|*IDENT=page-diagnostics-nanobsd
-##|*NAME=Diagnostics: NanoBSD
-##|*DESCR=Allow access to the 'Diagnostics: NanoBSD' page.
-##|*MATCH=diag_nanobsd.php*
-##|-PRIV
-
-ini_set('zlib.output_compression', 0);
-ini_set('implicit_flush', 1);
-ini_set('max_input_time', '9999');
-
-require_once("guiconfig.inc");
-require_once("config.inc");
-
-// Setting DEBUG to true causes the dangerous stuff on this page to be simulated rather than executed.
-// MUST be set to false for production of course
-define('DEBUG', false);
-
-$pgtitle = array(gettext("Diagnostics"), gettext("NanoBSD"));
-include("head.inc");
-
-// Survey slice info
-global $SLICE, $OLDSLICE, $TOFLASH, $COMPLETE_PATH, $COMPLETE_BOOT_PATH;
-global $GLABEL_SLICE, $UFS_ID, $OLD_UFS_ID, $BOOTFLASH;
-global $BOOT_DEVICE, $REAL_BOOT_DEVICE, $BOOT_DRIVE, $ACTIVE_SLICE;
-nanobsd_detect_slice_info();
-
-$NANOBSD_SIZE = nanobsd_get_size();
-$class = 'alert-warning';
-
-if ($_POST['bootslice']) {
-	if (!DEBUG) {
-	   nanobsd_switch_boot_slice();
-	} else {
-	   sleep(4);
-	}
-
-	$savemsg = sprintf(gettext("The boot slice has been set to %s."), nanobsd_get_active_slice());
-	$class = 'alert-success';
-	// Survey slice info
-	nanobsd_detect_slice_info();
-}
-
-if ($_POST['destslice'] && $_POST['duplicateslice']) {
-	$statusmsg = gettext("Duplicating slice.  Please wait, this will take a moment...");
-
-	if (!DEBUG && nanobsd_clone_slice($_POST['destslice'])) {
-		$savemsg = gettext("The slice has been duplicated.") . "<p/>" . gettext("To boot from this newly duplicated slice set it using the bootup information area.");
-		$class = 'alert-success';
-	} else {
-		$savemsg = gettext("There was an error while duplicating the slice. Operation aborted.");
-		$class = 'alert-danger';
-	}
-	// Re-Survey slice info
-	nanobsd_detect_slice_info();
-}
-
-if ($_POST['changero']) {
-	if (!DEBUG && is_writable("/")) {
-		conf_mount_ro();
-	} else {
-		conf_mount_rw();
-	}
-}
-
-if ($_POST['setrw']) {
-	if (!DEBUG) {
-		conf_mount_rw();
-		if (isset($_POST['nanobsd_force_rw'])) {
-			$savemsg = gettext("Permanent read/write has been set successfully.");
-			$class = 'alert-success';
-			$config['system']['nanobsd_force_rw'] = true;
-		} else {
-			$savemsg = gettext('Permanent read/write has been cleared successfully.');
-			$class = 'alert-success';
-			unset($config['system']['nanobsd_force_rw']);
-		}
-
-		write_config(gettext("Changed Permanent Read/Write Setting"));
-		conf_mount_ro();
-	} else {
-		$savemsg = gettext('Saved read/write permanently.');
-		$class = 'alert-success';
-	}
-}
-
-print_info_box(gettext("The options on this page are intended for use by advanced users only."));
-
-if ($savemsg) {
-	print_info_box($savemsg, $class);
-}
-
-$form = new Form(false);
-
-$section = new Form_Section('NanoBSD Options');
-
-$section->addInput(new Form_StaticText(
-	'Image Size',
-	$NANOBSD_SIZE
-));
-
-$slicebtn = new Form_Button(
-	'bootslice',
-	'Switch Slice',
-	null,
-	'fa-retweet'
-);
-$slicebtn->addClass('btn-warning btn-sm');
-
-$section->addInput(new Form_StaticText(
-	'Bootup slice',
-	$ACTIVE_SLICE . ' ' . $slicebtn
-));
-
-$refcount = refcount_read(1000);
-$mounted_rw = is_writable("/");
-
-if ($mounted_rw) {
-	/* refcount_read returns -1 when shared memory section does not exist */
-	/* refcount can be zero here when the user has set nanobsd_force_rw */
-	/* refcount 1 is normal, so only display the count for abnormal values */
-	/*
-	if ($refcount == 1 || $refcount == 0 || $refcount == -1) {
-		$refdisplay = "";
-	} else {
-		$refdisplay = " ". sprintf(gettext("(Reference count %s)"), $refcount);
-	}
-	*/
-	$lbl = gettext("Read/Write") . $refdisplay;
-	$btnlbl = gettext("Switch to Read-Only");
-} else {
-	$lbl = gettext("Read-Only");
-	$btnlbl = gettext("Switch to Read/Write");
-}
-
-// Only show the changero button if force read/write is off, or the file system is not in writable state, or there is an unusual refcount.
-// If force read/write is on, and the file system is in writable state, and refcount is normal then the user has no reason to mess about.
-/*
-if (!isset($config['system']['nanobsd_force_rw']) || !$mounted_rw || ($refcount > 1)) {
-	$robtn = new Form_Button(
-		'changero',
-		$btnlbl,
-		null,
-		($mounted_rw) ? 'fa-lock' : 'fa-unlock'
-	);
-	$robtn->addClass(($mounted_rw) ? 'btn-success' : 'btn-warning' . ' btn-sm');
-	$lbl .= ' ' . $robtn;
-}
-*/
-$section->addInput(new Form_StaticText(
-	'Read/Write status',
-	$lbl
-))->setHelp('NanoBSD is now always read-write to avoid read-write to read-only mount problems.');
-//))->setHelp('This setting is only temporary, and can be switched dynamically in the background.');
-
-/*
-$section->addInput(new Form_Checkbox(
-	'nanobsd_force_rw',
-	'Permanent Read/Write',
-	'Keep media mounted read/write at all times. ',
-	isset($config['system']['nanobsd_force_rw'])
-));
-
-$permbtn = new Form_Button(
-	'setrw',
-	'Save',
-	null,
-	'fa-save'
-);
-$permbtn->addClass('btn-primary btn-sm');
-
-$section->addInput(new Form_StaticText(
-	null,
-	$permbtn
-));
-*/
-
-$section->addInput(new Form_Input(
-	'destslice',
-	null,
-	'hidden',
-	$COMPLETE_PATH
-));
-
-$dupbtn = new Form_Button(
-	'duplicateslice',
-	'Duplicate ' . $COMPLETE_BOOT_PATH . ' -> ' . $TOFLASH,
-	null,
-	'fa-clone'
-);
-$dupbtn->addClass('btn-success btn-sm');
-
-$section->addInput(new Form_StaticText(
-	'Duplicate boot slice',
-	$dupbtn
-))->setHelp('This will duplicate the bootup slice to the alternate slice.  Use this to duplicate the known good working boot partition to the alternate.');
-
-$section->addInput(new Form_StaticText(
-	'RRD/DHCP Backup',
-	'These options have been relocated to the ' . '<a href="system_advanced_misc.php">' . 'System > Advanced, Miscellaneous</a> tab.'
-));
-
-if (file_exists("/conf/upgrade_log.txt")) {
-	$viewbtn = new Form_Button(
-		'viewupgradelog',
-		'View log',
-		null,
-		'fa-file-text-o'
-	);
-	$viewbtn->addClass('btn-primary btn-sm');
-
-	$section->addInput(new Form_StaticText(
-		'View previous upgrade log',
-		$viewbtn
-	));
-}
-$form->add($section);
-print($form);
-
-if (file_exists("/conf/upgrade_log.txt") && $_POST['viewupgradelog']) {
-?>
-	<div class="panel panel-default">
-		<div class="panel-heading"><h2 class="panel-title"><?=gettext("Previous Upgrade Log")?></h2></div>
-			<!-- No white space between the <pre> and the first output or it will appear on the page! -->
-			<pre>
-				<?=str_ireplace("pfsense", $g['product_name'], file_get_contents("/conf/upgrade_log.txt"))?>
-			</pre>
-	</div>
-<?php
-}
-require_once("foot.inc");
diff --git a/src/usr/local/www/head.inc b/src/usr/local/www/head.inc
index c8b882a..1f0d4aa 100644
--- a/src/usr/local/www/head.inc
+++ b/src/usr/local/www/head.inc
@@ -365,10 +365,6 @@ $diagnostics_menu[] = array(gettext("System Activity"), "/diag_system_activity.p
 $diagnostics_menu[] = array(gettext("Traceroute"), "/diag_traceroute.php");
 $diagnostics_menu[] = array(gettext("Packet Capture"), "/diag_packet_capture.php");
 
-if ($g['platform'] == "nanobsd") {
-	$diagnostics_menu[] = array(gettext("NanoBSD"), "/diag_nanobsd.php");
-}
-
 if (isset($config['system']['developer'])) {
 	$diagnostics_menu[] = array(gettext("Restart HTTPD"), "/restart_httpd.php", "style" => "font-weight: bold; color: yellow;");
 }
diff --git a/src/usr/local/www/help.php b/src/usr/local/www/help.php
index e60726d..9954067 100644
--- a/src/usr/local/www/help.php
+++ b/src/usr/local/www/help.php
@@ -81,7 +81,6 @@ $helppages = array(
 	'status_logs_filter_summary.php' => 'https://doc.pfsense.org/index.php/Firewall_Logs',
 	'status_logs_settings.php' => 'https://doc.pfsense.org/index.php/Log_Settings',
 	'status_logs_vpn.php' => 'https://doc.pfsense.org/index.php/PPTP_VPN_Logs',
-	'diag_nanobsd.php' => 'https://doc.pfsense.org/index.php/NanoBSD_Diagnostics',
 	'diag_ping.php' => 'https://doc.pfsense.org/index.php/Ping_Host',
 	'status_pkglogs.php' => 'https://doc.pfsense.org/index.php/Package_Logs',
 	'diag_tables.php' => 'https://doc.pfsense.org/index.php/Tables',