Retire /etc/rc.firmware and /etc/rc.firmware_auto

2 files changed, 0 insertions, 549 deletions

diff --git a/src/etc/rc.firmware b/src/etc/rc.firmware
deleted file mode 100755
index e8d549f..0000000
--- a/src/etc/rc.firmware
+++ /dev/null
@@ -1,476 +0,0 @@
-#!/bin/sh
-
-# /etc/rc.firmware
-# originally part of m0n0wall (http://neon1.net/m0n0wall)
-# Copyright (C) 2005-2009 Scott Ullrich <sullrich@pfsense.org>.
-# Copyright (C) 2003 Manuel Kasper <mk@neon1.net>.
-# All rights reserved.
-
-# mount /cf
-/etc/rc.conf_mount_rw
-
-# Reset file(s)
-echo "" >/conf/upgrade_log.txt
-echo "" >/conf/firmware_update_misc_log.txt
-echo "" >/conf/fdisk_upgrade_log.txt
-
-exec 3>&2 2>>/conf/firmware_update_misc_log.txt
-
-export ACTION=$1
-export IMG=$2
-if [ $# -eq 3 ]; then
-	export CUSTOMIMG=$3
-fi
-
-file_notice() {
-	/usr/local/bin/php-cgi -q -d auto_prepend_file=config.inc <<ENDOFF
-	<?php
-		require_once("globals.inc");
-		require_once("functions.inc");
-		file_notice("$1", "$2", "$1", "");
-	?>
-ENDOFF
-}
-
-output_env_to_log() {
-	date >> /conf/upgrade_log.txt
-	echo "" >> /conf/upgrade_log.txt
-
-	ls -lah /dev/ >> /conf/upgrade_log.txt
-	echo "" >> /conf/upgrade_log.txt
-
-	ls -lah $IMG >> /conf/upgrade_log.txt
-	echo "" >> /conf/upgrade_log.txt
-
-	md5 $IMG >> /conf/upgrade_log.txt
-	echo "" >> /conf/upgrade_log.txt
-
-	mount >> /conf/upgrade_log.txt
-	echo "" >> /conf/upgrade_log.txt
-
-	top >> /conf/upgrade_log.txt
-	echo "" >> /conf/upgrade_log.txt
-}
-
-backup_chflags() {
-	TOPROCESS="bin lib libexec sbin usr"
-	for files in $TOPROCESS; do
-		/usr/sbin/mtree -Pcp /${files} | bzip2 -9 > /tmp/chflags.dist.${files}.bz2 2>> /conf/upgrade_log.txt
-	done
-}
-
-restore_chflags() {
-	TOPROCESS="bin lib libexec sbin usr"
-	for files in $TOPROCESS; do
-		cd / && /usr/bin/bzcat /tmp/chflags.dist.${files}.bz2 | /usr/sbin/mtree -P -p /${files} >> /conf/upgrade_log.txt 2>&1
-	done
-}
-
-remove_chflags() {
-	TOPROCESS="bin lib libexec sbin usr"
-	for files in $TOPROCESS; do
-		/bin/chflags -R noschg /${files}
-		/bin/chmod -R u+rw /${files}
-	done
-}
-
-case $ACTION in
-enable)
-	touch /conf/upgrade_log.txt
-	echo "" >> /conf/upgrade_log.txt
-	echo "Enable" >> /conf/upgrade_log.txt
-	echo "" >> /conf/upgrade_log.txt
-	/etc/rc.conf_mount_ro
-	;;
-auto)
-	touch /var/run/firmwarelock.dirty
-	backup_chflags
-	remove_chflags
-	/etc/rc.firmware_auto
-	restore_chflags
-	/etc/rc.conf_mount_ro
-	;;
-pfSenseNanoBSDupgrade)
-
-	# Sanity check - bail early if there's no firmware file!
-	if [ ! -r $IMG ]; then
-		echo "2nd parameter has not been passed or file does not exist. Exiting." >> /conf/upgrade_log.txt 2>&1
-		/etc/rc.conf_mount_ro
-		exit 1
-	fi
-
-	# Prevent full upgrade file from being used to upgrade
-	if [ `echo $IMG | grep "full"` ]; then
-		echo "You cannot use a full file for upgrade.  Please use a file labelled nanobsd upgrade."
-		file_notice "NanoBSDUpgradeFailure" "You have attempted to use a full NanoBSD installation file as an upgrade.  Please use a NanoBSD file labelled 'upgrade' instead."
-		rm -f $IMG
-		/etc/rc.conf_mount_ro
-		exit 1
-	fi
-
-	touch /var/run/firmwarelock.dirty
-
-	echo "NanoBSD Firmware upgrade in progress..." >> /conf/upgrade_log.txt 2>&1
-	echo "NanoBSD Firmware upgrade in progress..." | wall
-	/etc/rc.notify_message -e -g -m "NanoBSD Firmware upgrade in progress..."
-
-	# backup config
-	/bin/mkdir -p /tmp/configbak
-	cp -Rp /conf/* /tmp/configbak 2>/dev/null
-
-	# Remove logs from backup dir to avoid clobbering upon restore.
-	rm /tmp/configbak/*_log.txt 2>/dev/null
-
-	echo "" >> /conf/upgrade_log.txt
-
-	echo "Installing ${IMG}." >> /conf/upgrade_log.txt 2>&1
-	echo "Installing ${IMG}." | wall
-
-	# resolve glabel label that we booted from
-	BOOT_DEVICE=`/sbin/mount | /usr/bin/grep pfsense | /usr/bin/cut -d'/' -f4 | /usr/bin/cut -d' ' -f1`
-	# resolve glabel to the real boot dev entry
-	REAL_BOOT_DEVICE=`/sbin/glabel list | /usr/bin/grep -B2 ufs/${BOOT_DEVICE} | /usr/bin/head -n 1 | /usr/bin/cut -f3 -d' '`
-	# grab the boot device, example ad1, ad0
-	BOOT_DRIVE=`/sbin/glabel list | /usr/bin/grep -B2 ufs/pfsense | /usr/bin/head -n 1 | /usr/bin/cut -f3 -d' ' | /usr/bin/cut -d's' -f1`
-	# test the slice.  if we are on slice 1 we need to flash 2 and vice versa
-	if [ `echo $REAL_BOOT_DEVICE | /usr/bin/grep "s1"` ]; then
-		SLICE="2"
-		OLDSLICE="1"
-		TOFLASH="${BOOT_DRIVE}s${SLICE}"
-		COMPLETE_PATH="${BOOT_DRIVE}s${SLICE}a"
-		GLABEL_SLICE="pfsense1"
-		UFS_ID="1"
-		OLD_UFS_ID="0"
-	else
-		SLICE="1"
-		OLDSLICE="2"
-		TOFLASH="${BOOT_DRIVE}s${SLICE}"
-		COMPLETE_PATH="${BOOT_DRIVE}s${SLICE}a"
-		GLABEL_SLICE="pfsense0"
-		UFS_ID="0"
-		OLD_UFS_ID="1"
-	fi
-
-	# Output specific information that this script is using
-	echo "SLICE         ${SLICE}" >> /conf/upgrade_log.txt
-	echo "OLDSLICE      ${OLDSLICE}" >> /conf/upgrade_log.txt
-	echo "TOFLASH       ${TOFLASH}" >> /conf/upgrade_log.txt
-	echo "COMPLETE_PATH ${COMPLETE_PATH}" >> /conf/upgrade_log.txt
-	echo "GLABEL_SLICE  ${GLABEL_SLICE}" >> /conf/upgrade_log.txt
-
-	# First ensure the new file can fit inside the
-	# slice that we are going to be operating on.
-	NEW_IMG_SIZE=`echo $((\`gzip -l ${IMG} | grep -v compressed | awk '{ print $2}'\` / 1024 / 1024))`
-	SIZE=`/sbin/fdisk ${COMPLETE_PATH} | /usr/bin/grep Meg | /usr/bin/awk '{ print $5 }' | /usr/bin/cut -d"(" -f2`
-	# USB slices are under-reported even more than CF slices when viewed
-	# directly, instead of when looking at the entire disk. Compensate
-	# by adding exactly 6MB. 4MB was consistently 2MB too few, and
-	# was resulting in failing upgrades on USB Flash based installs.
-	SIZE=`expr $SIZE + 6`
-	if [ "$SIZE" -lt "$NEW_IMG_SIZE" ]; then
-		file_notice "UpgradeFailure" "Upgrade failed due to the upgrade image being larger than the partition that is configured on disk.  Halting. Size on disk: $SIZE < Size of new image: $NEW_IMG_SIZE"
-		echo "Upgrade failed.  Please check the system log file for more information" | wall
-		rm -f $IMG
-		rm -f /var/run/firmwarelock.dirty
-		rm -f /var/run/firmware.lock
-		rm -f ${IMG}
-		/etc/rc.conf_mount_ro
-		exit 1
-	fi
-
-	# Output environment information to log file
-	output_env_to_log
-
-	# Grab a before upgrade look at fdisk
-	echo "" >> /conf/fdisk_upgrade_log.txt
-	echo "Before upgrade fdisk/bsdlabel" >> /conf/fdisk_upgrade_log.txt
-	fdisk $BOOT_DRIVE >> /conf/fdisk_upgrade_log.txt
-	bsdlabel -A ${BOOT_DRIVE}s1 >> /conf/fdisk_upgrade_log.txt
-	bsdlabel -A ${BOOT_DRIVE}s2 >> /conf/fdisk_upgrade_log.txt
-	bsdlabel -A ${BOOT_DRIVE}s3 >> /conf/fdisk_upgrade_log.txt
-	echo "---------------------------------------------------------------" >> /conf/fdisk_upgrade_log.txt
-	echo "" >> /conf/fdisk_upgrade_log.txt
-
-	# Log that we are really doing a NanoBSD upgrade
-	echo "" >> /conf/upgrade_log.txt
-	echo "NanoBSD upgrade starting" >> /conf/upgrade_log.txt
-	echo "" >> /conf/upgrade_log.txt
-
-	# Remove TOFLASH and get ready for new flash image
-	echo "" >> /conf/upgrade_log.txt
-	echo "dd if=/dev/zero of=/dev/${TOFLASH} bs=1m count=1" >> /conf/upgrade_log.txt
-	dd if=/dev/zero of=/dev/${TOFLASH} bs=1m count=1 >> /conf/upgrade_log.txt 2>&1
-
-	# Stream gzipped image to dd and explode image to new area
-	echo "" >> /conf/upgrade_log.txt
-	echo "/usr/bin/gzip -dc $IMG | /bin/dd of=/dev/${TOFLASH} obs=64k" >> /conf/upgrade_log.txt
-	/usr/bin/gzip -dc $IMG | /bin/dd of=/dev/${TOFLASH} obs=64k >> /conf/upgrade_log.txt 2>&1
-
-	# Grab an after upgrade look at fdisk
-	echo "" >> /conf/fdisk_upgrade_log.txt
-	echo "After upgrade fdisk/bsdlabel" >> /conf/upgrade_log.txt
-	fdisk $BOOT_DRIVE >> /conf/fdisk_upgrade_log.txt
-	bsdlabel -A ${BOOT_DRIVE}s1 >> /conf/fdisk_upgrade_log.txt
-	bsdlabel -A ${BOOT_DRIVE}s2 >> /conf/fdisk_upgrade_log.txt
-	bsdlabel -A ${BOOT_DRIVE}s3 >> /conf/fdisk_upgrade_log.txt
-	echo "---------------------------------------------------------------" >> /conf/fdisk_upgrade_log.txt
-	echo "" >> /conf/fdisk_upgrade_log.txt
-
-	# Ensure that our new system is sound and bail if it is not and file a notice
-	echo "" >> /conf/upgrade_log.txt
-	echo "/sbin/fsck_ufs -y /dev/${COMPLETE_PATH}" >> /conf/upgrade_log.txt
-	/sbin/fsck_ufs -y /dev/${COMPLETE_PATH} >> /conf/upgrade_log.txt 2>&1
-	if [ $? != 0 ]; then
-		file_notice "UpgradeFailure" "{\$g['product_name']} upgrade has failed.   Your system has been left in a usable state."
-		rm -f $IMG
-		rm -f /var/run/firmwarelock.dirty
-		rm -f /var/run/firmware.lock
-		/etc/rc.conf_mount_ro
-		exit 1
-	fi
-
-	# Enable foot shooting
-	sysctl kern.geom.debugflags=16
-
-	# Add back the corresponding glabel
-	echo "" >> /conf/upgrade_log.txt
-	echo "/sbin/tunefs -L ${GLABEL_SLICE} /dev/${COMPLETE_PATH}" >> /conf/upgrade_log.txt
-	/sbin/tunefs -L ${GLABEL_SLICE} /dev/${COMPLETE_PATH} >> /conf/upgrade_log.txt 2>&1
-
-	# restore config
-	cp -Rp /tmp/configbak/* /conf 2>/dev/null
-
-	# Remove upgrade file
-	rm -f $IMG
-
-	# Mount newly prepared slice
-	mkdir /tmp/$GLABEL_SLICE
-	mount /dev/ufs/$GLABEL_SLICE /tmp/$GLABEL_SLICE
-
-	# If /boot/loader.conf.local exists
-	# copy to the other slice.
-	if [ -f /boot/loader.conf.local ]; then
-		cp /boot/loader.conf.local /tmp/$GLABEL_SLICE/boot/loader.conf.local
-	fi
-
-	# If /tmp/$GLABEL_SLICE/usr/local/share/pfSense/post_upgrade_command exists
-	# after update then execute the command.
-	echo "Checking for post_upgrade_command..." >> /conf/upgrade_log.txt
-	if [ -f /tmp/$GLABEL_SLICE/usr/local/share/pfSense/post_upgrade_command ]; then
-		echo "Found post_upgrade_command, executing ($GLABEL_SLICE)..." >> /conf/upgrade_log.txt
-		sh /tmp/$GLABEL_SLICE/usr/local/share/pfSense/post_upgrade_command $GLABEL_SLICE >> /conf/upgrade_log.txt 2>&1
-	fi
-
-	# Update fstab
-	cp /etc/fstab /tmp/$GLABEL_SLICE/etc/fstab
-	sed -i "" "s/pfsense${OLD_UFS_ID}/pfsense${UFS_ID}/g" /tmp/$GLABEL_SLICE/etc/fstab
-	if [ $? != 0 ]; then
-		echo "Something went wrong when trying to update the fstab entry.  Aborting upgrade."
-		file_notice "UpgradeFailure" "Something went wrong when trying to update the fstab entry.  Aborting upgrade."
-		rm -f $IMG
-		rm -f /var/run/firmwarelock.dirty
-		rm -f /var/run/firmware.lock
-		umount /tmp/$GLABEL_SLICE
-		/etc/rc.conf_mount_ro
-		exit 1
-	fi
-	echo "" >> /conf/upgrade_log.txt
-	cat /tmp/$GLABEL_SLICE/etc/fstab >> /conf/upgrade_log.txt
-
-	echo "" >> /conf/upgrade_log.txt
-	find /tmp/$GLABEL_SLICE >/conf/file_upgrade_log.txt
-	echo "" >> /conf/upgrade_log.txt
-
-	# Unmount newly prepared slice
-	umount /tmp/$GLABEL_SLICE
-
-	sync
-
-	# Set active mount slice in fdisk
-	echo "" >> /conf/upgrade_log.txt
-	echo "gpart set -a active -i ${SLICE} ${BOOT_DRIVE}" >> /conf/upgrade_log.txt
-	gpart set -a active -i ${SLICE} ${BOOT_DRIVE} >> /conf/upgrade_log.txt 2>&1
-
-	sync
-
-	# Set active boot source - NanoBSD does not do this but otherwise we
-	# end up with the wrong partition being active.
-	echo "" >> /conf/upgrade_log.txt
-	echo "/usr/sbin/boot0cfg -s ${SLICE} -v /dev/${BOOT_DRIVE}" >> /conf/upgrade_log.txt
-	/usr/sbin/boot0cfg -s ${SLICE} -v /dev/${BOOT_DRIVE} >> /conf/upgrade_log.txt 2>&1
-
-	# Disable foot shooting
-	sysctl kern.geom.debugflags=0
-
-	# Grab a final look at fdisk
-	echo "" >> /conf/fdisk_upgrade_log.txt
-	echo "Final upgrade fdisk/bsdlabel" >> /conf/fdisk_upgrade_log.txt
-	fdisk $BOOT_DRIVE >> /conf/fdisk_upgrade_log.txt
-	bsdlabel -A ${BOOT_DRIVE}s1 >> /conf/fdisk_upgrade_log.txt
-	bsdlabel -A ${BOOT_DRIVE}s2 >> /conf/fdisk_upgrade_log.txt
-	bsdlabel -A ${BOOT_DRIVE}s3 >> /conf/fdisk_upgrade_log.txt
-	echo "---------------------------------------------------------------" >> /conf/fdisk_upgrade_log.txt
-	echo "" >> /conf/fdisk_upgrade_log.txt
-
-	# Remove extra stuff
-	rm -rf /usr/savecore/*
-
-	date >> /conf/upgrade_log.txt
-	echo "" >> /conf/upgrade_log.txt
-
-	# Trigger a package reinstallation on reboot
-	touch /conf/needs_package_sync
-
-	# remount /cf ro
-	/etc/rc.conf_mount_ro
-	/bin/sync
-
-	echo "NanoBSD Firmware upgrade is complete.  Rebooting in 10 seconds." >> /conf/upgrade_log.txt 2>&1
-	echo "NanoBSD Firmware upgrade is complete.  Rebooting in 10 seconds." | wall
-	/etc/rc.notify_message -e -g -m "NanoBSD Firmware upgrade is complete.  Rebooting in 10 seconds."
-
-	sleep 10
-
-	rm -f /var/run/firmwarelock.dirty
-	rm -f /var/run/firmware.lock
-	. /etc/rc.reboot
-
-	;;
-pfSenseupgrade)
-
-	# Sanity check - bail early if there's no firmware file!
-	if [ ! -r $IMG ]; then
-		echo "2nd parameter has not been passed or file does not exist. Exiting." >> /conf/upgrade_log.txt 2>&1
-		/etc/rc.conf_mount_ro
-		exit
-	fi
-
-	# wait 1 second before beginning
-	sleep 1
-
-	# Log that we are really doing a pfSense upgrade
-	echo "" >> /conf/upgrade_log.txt
-	echo "pfSenseupgrade upgrade starting" >> /conf/upgrade_log.txt
-	echo "" >> /conf/upgrade_log.txt
-
-	touch /var/run/firmwarelock.dirty
-
-	if [ -f /tmp/perform_full_backup.txt ]; then
-		echo "Performing full backup" >> /conf/upgrade_log.txt
-		/etc/rc.create_full_backup
-		rm /tmp/perform_full_backup.txt
-	fi
-
-	touch /conf/upgrade_log.txt
-	echo "" >> /conf/upgrade_log.txt
-
-	# Output environment information to log file
-	output_env_to_log
-
-	backup_chflags
-	remove_chflags
-
-	# Do we have a pre-upgrade hook in the update file?
-	if [ `tar tvzf $IMG | grep /usr/local/share/pfSense/pre_upgrade_command | wc -l` -gt 0 ]; then
-		tar xzvf $IMG -C / ./usr/local/share/pfSense/pre_upgrade_command >> /conf/upgrade_log.txt 2>&1
-		chmod a+rx /usr/local/share/pfSense/pre_upgrade_command >> /conf/upgrade_log.txt 2>&1
-		sh /usr/local/share/pfSense/pre_upgrade_command >> /conf/upgrade_log.txt 2>&1
-	fi
-
-	echo "Firmware upgrade in progress..." >> /conf/upgrade_log.txt 2>&1
-	echo "Firmware upgrade in progress..." | wall
-	/etc/rc.notify_message -e -g -m "Firmware upgrade in progress..."
-
-	# backup config
-	[ -d /tmp/configbak ] && rm -rf /tmp/configbak
-	/bin/mkdir -p /tmp/configbak
-	cp -Rp /conf/* /tmp/configbak 2>/dev/null
-
-	# Remove logs from backup dir to avoid clobbering upon restore.
-	rm /tmp/configbak/*_log.txt 2>/dev/null
-
-	# tar explode image onto hd
-	killall -9 check_reload_status
-	killall -9 check_reload_status
-	echo "Installing $IMG." >> /conf/upgrade_log.txt 2>&1
-	cd / && /usr/bin/tar --exclude=./dev -xzUPf $IMG >> /conf/upgrade_log.txt 2>&1
-	/usr/local/sbin/check_reload_status
-	echo "Image installed $IMG." >> /conf/upgrade_log.txt 2>&1
-
-	# process custom image if its passed
-	if [ $# -eq 3 ]; then
-		if [ -f $CUSTOMIMG ]; then
-			echo "Custom image $CUSTOMIMG found." >> /conf/upgrade_log.txt 2>&1
-			echo "Custom image ($CUSTOMIMG) found." >> /conf/upgrade_log.txt 2>&1
-			PWD_DIR=`pwd`
-			cd / && /usr/bin/tar xzPUf $CUSTOMIMG >> /conf/upgrade_log.txt 2>&1
-			cd $PWD_DIR
-			echo "Custom image $CUSTOMIMG installed." >> /conf/upgrade_log.txt 2>&1
-		fi
-	fi
-
-	# restore config
-	cp -Rp /tmp/configbak/* /conf 2>/dev/null
-
-	# restore /etc symlinks
-	rm /etc/hosts
-	ln -s /var/etc/hosts /etc/hosts
-
-	restore_chflags
-
-	# Remove upgrade file
-	rm -f $IMG
-
-	if [ -e /etc/init_bootloader.sh ]; then
-		if [ ! -x /etc/init_bootloader.sh ]; then
-			chmod ug+x /etc/init_bootloader.sh
-		fi
-		/etc/init_bootloader.sh >> /conf/upgrade_log.txt 2>&1
-	fi
-
-	# Remove saved commit ID for gitsync
-	rm -f /etc/version.gitsync
-
-	# If /usr/local/share/pfSense/post_upgrade_command exists after update
-	# then execute the command.
-	if [ -f /usr/local/share/pfSense/post_upgrade_command ]; then
-		if [ ! -x /usr/local/share/pfSense/post_upgrade_command ]; then
-			chmod ug+x /usr/local/share/pfSense/post_upgrade_command
-		fi
-		/usr/local/share/pfSense/post_upgrade_command >> /conf/upgrade_log.txt 2>&1
-	fi
-
-	# remove unused files
-	rm -rf /etc/rc.conf
-	rm -rf /usr/savecore/*
-
-	date >> /conf/upgrade_log.txt
-	echo "" >> /conf/upgrade_log.txt
-
-	# remount /cf ro
-	/etc/rc.conf_mount_ro
-
-	# release the firmware lock
-	rm -f /var/run/firmwarelock.dirty
-	rm -f /var/run/firmware.lock
-	/bin/sync
-
-	echo "Firmware upgrade is complete. Rebooting in 10 seconds." >> /conf/upgrade_log.txt 2>&1
-	echo "Firmware upgrade is complete. Rebooting in 10 seconds." | wall
-	/etc/rc.notify_message -e -g -m "Firmware upgrade is complete. Rebooting in 10 seconds."
-
-	# Sleep and allow disks to catch up
-	sleep 10
-
-	# If the archive has unpacked a file called
-	# /tmp/no_upgrade_reboot_required then do
-	# not reboot after upgrade.
-	if [ -f /tmp/no_upgrade_reboot_required ]; then
-		rm /tmp/no_upgrade_reboot_required
-	else
-		. /etc/rc.reboot
-	fi
-
-	;;
-esac
-
diff --git a/src/etc/rc.firmware_auto b/src/etc/rc.firmware_auto
deleted file mode 100755
index 47ad8c9..0000000
--- a/src/etc/rc.firmware_auto
+++ /dev/null
@@ -1,73 +0,0 @@
-#!/bin/sh
-
-# /etc/rc.firmware_auto
-# Copyright (C) 2005-2015 Electric Sheep Fencing LLC
-# Part of pfSense
-
-# $Id$
-
-FMBASEURL=$1
-FMFILENAME=$2
-FETCHFILENAME=$1/$2
-
-# Read product_name from $g, defaults to pfSense
-product=$(/usr/local/sbin/read_global_var product_name pfSense)
-
-# wait 5 seconds before beginning
-sleep 5
-
-logger -p daemon.info -i -t AutoUpgrade "Auto Upgrade started"
-
-HTTP_AUTH=""
-
-# if username and password is passed, let fetch utilize.
-if [ $# -gt 3 ]; then
-HTTP_AUTH="basic:*:$3:$4"
-fi
-
-if [ $# -gt 1 ]; then
-	echo "Downloading $FMFILENAME from $FMBASEURL ..." | logger -p daemon.info -i -t AutoUpgrade
-	/usr/bin/fetch -o /tmp/latest.tgz $FETCHFILENAME | logger -p daemon.info -i -t AutoUpgrade
-	echo "Downloading $FMFILENAME.sha256 from $FMBASEURL ..." | logger -p daemon.info -i -t AutoUpgrade
-	/usr/bin/fetch -o /tmp/latest.tgz.sha256 $FETCHFILENAME.sha256 | logger -p daemon.info -i -t AutoUpgrade
-fi
-
-DLHASH=`/bin/cat /tmp/latest.tgz.sha256 | cut -d" " -f4 `
-FILEHASH=`/sbin/sha256 /tmp/latest.tgz | cut -d" " -f4`
-
-PLATFORM=`cat /etc/platform`
-
-echo "   Package sha256: ${DLHASH}" | logger -p daemon.info -i -t AutoUpgrade
-echo "Downloaded sha256: ${FILEHASH}" | logger -p daemon.info -i -t AutoUpgrade
-
-if [ "$DLHASH" = "" ]; then
-	echo "Downloaded sha256 is null. Require proxy auth?" | logger -p daemon.info -i -t AutoUpgrade
-	exit 1
-fi
-
-if [ "$FILEHASH" = "" ]; then
-	echo "Downloaded file's sha256 is null." | logger -p daemon.info -i -t AutoUpgrade
-	exit 1
-fi
-
-if [ "$DLHASH" = "$FILEHASH" ]; then
-	echo "sha256 hashes match." | logger -p daemon.info -i -t AutoUpgrade
-	echo "Beginning ${product} upgrade." | wall
-	if [ "$PLATFORM" = "nanobsd" ]; then
-		/usr/local/bin/php-cgi /etc/rc.conf_mount_rw
-	fi
-	if [ -r "/tmp/custom.tgz" ]; then
-		sh /etc/rc.firmware ${product}upgrade /tmp/latest.tgz /tmp/custom.tgz
-	else
-		if [ "$PLATFORM" = "nanobsd" ]; then
-			sh /etc/rc.firmware ${product}NanoBSDupgrade /tmp/latest.tgz
-		else
-			sh /etc/rc.firmware ${product}upgrade /tmp/latest.tgz
-		fi
-	fi
-	exit 0
-fi
-
-echo "sha256 hashes do not match. Upgrade aborted." | logger -p daemon.info -i -t AutoUpgrade
-rm /tmp/latest*
-exit 1