Retire system_firmware.php, system_firmware_auto.php and system_firmware_check.php

1 files changed, 0 insertions, 353 deletions

diff --git a/src/usr/local/www/system_firmware.php b/src/usr/local/www/system_firmware.php
deleted file mode 100644
index 4587a91..0000000
--- a/src/usr/local/www/system_firmware.php
+++ /dev/null
@@ -1,353 +0,0 @@
-<?php
-/*
-	system_firmware.php
-*/
-/* ====================================================================
- *	Copyright (c)  2004-2015  Electric Sheep Fencing, LLC. All rights reserved.
- *
- *	Some or all of this file is based on the m0n0wall project which is
- *	Copyright (c)  2004 Manuel Kasper (BSD 2 clause)
- *
- *	Redistribution and use in source and binary forms, with or without modification,
- *	are permitted provided that the following conditions are met:
- *
- *	1. Redistributions of source code must retain the above copyright notice,
- *		this list of conditions and the following disclaimer.
- *
- *	2. Redistributions in binary form must reproduce the above copyright
- *		notice, this list of conditions and the following disclaimer in
- *		the documentation and/or other materials provided with the
- *		distribution.
- *
- *	3. All advertising materials mentioning features or use of this software
- *		must display the following acknowledgment:
- *		"This product includes software developed by the pfSense Project
- *		 for use in the pfSense software distribution. (http://www.pfsense.org/).
- *
- *	4. The names "pfSense" and "pfSense Project" must not be used to
- *		 endorse or promote products derived from this software without
- *		 prior written permission. For written permission, please contact
- *		 coreteam@pfsense.org.
- *
- *	5. Products derived from this software may not be called "pfSense"
- *		nor may "pfSense" appear in their names without prior written
- *		permission of the Electric Sheep Fencing, LLC.
- *
- *	6. Redistributions of any form whatsoever must retain the following
- *		acknowledgment:
- *
- *	"This product includes software developed by the pfSense Project
- *	for use in the pfSense software distribution (http://www.pfsense.org/).
- *
- *	THIS SOFTWARE IS PROVIDED BY THE pfSense PROJECT ``AS IS'' AND ANY
- *	EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- *	IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- *	PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE pfSense PROJECT OR
- *	ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *	SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *	NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- *	LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- *	HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- *	STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- *	ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- *	OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *	====================================================================
- *
- */
-/*
-	pfSense_BUILDER_BINARIES:	/usr/bin/tar
-	pfSense_MODULE: firmware
-*/
-
-##|+PRIV
-##|*IDENT=page-system-firmware-manualupdate
-##|*NAME=System: Firmware: Manual Update page
-##|*DESCR=Allow access to the 'System: Firmware: Manual Update' page.
-##|*MATCH=system_firmware.php*
-##|-PRIV
-
-$d_isfwfile = 1;
-$nocsrf = true;
-
-require_once("globals.inc");
-require_once("functions.inc");
-require_once("guiconfig.inc");
-require_once("xmlrpc_client.inc");
-
-$curcfg = $config['system']['firmware'];
-
-/* Allow additional execution time 0 = no limit. */
-ini_set('max_execution_time', '9999');
-ini_set('max_input_time', '9999');
-
-function file_is_for_platform($filename, $ul_name) {
-	global $g;
-	if ($g['platform'] == "nanobsd") {
-		if (stristr($ul_name, "nanobsd")) {
-			return true;
-		} else {
-			return false;
-		}
-	}
-	$_gb = exec("/usr/bin/tar xzf $filename -C /tmp/ etc/platform");
-	unset($_gb);
-	if (!file_exists("/tmp/etc/platform")) {
-		return false;
-	}
-	$upgrade_is_for_platform = trim(file_get_contents("/tmp/etc/platform", " \n\t\r"));
-	if ($g['platform'] == $upgrade_is_for_platform) {
-		@unlink("/tmp/etc/platform");
-		return true;
-	}
-	return false;
-}
-
-function file_upload_error_message($error_code) {
-	switch ($error_code) {
-		case UPLOAD_ERR_INI_SIZE:
-			return gettext('The uploaded file exceeds the upload_max_filesize directive in php.ini');
-		case UPLOAD_ERR_FORM_SIZE:
-			return gettext('The uploaded file exceeds the MAX_FILE_SIZE directive that was specified in the HTML form');
-		case UPLOAD_ERR_PARTIAL:
-			return gettext('The uploaded file was only partially uploaded');
-		case UPLOAD_ERR_NO_FILE:
-			return gettext('No file was uploaded');
-		case UPLOAD_ERR_NO_TMP_DIR:
-			return gettext('Missing a temporary folder');
-		case UPLOAD_ERR_CANT_WRITE:
-			return gettext('Failed to write file to disk');
-		case UPLOAD_ERR_EXTENSION:
-			return gettext('File upload stopped by extension');
-		default:
-			return gettext('Unknown upload error');
-	}
-}
-
-/* if upgrade in progress, alert user */
-if (is_subsystem_dirty('firmwarelock')) {
-	$pgtitle = array(gettext("System"), gettext("Firmware"), gettext("Manual Update"));
-	include("head.inc");
-	include("fbegin.inc");
-	print_info_box(gettext("An upgrade is currently in progress. The firewall will reboot when the operation is complete."));
-	include("foot.inc");
-	exit;
-}
-
-if ($_POST['backupbeforeupgrade']) {
-	touch("/tmp/perform_full_backup.txt");
-}
-
-/* Handle manual upgrade */
-if ($_POST && !is_subsystem_dirty('firmwarelock')) {
-
-	unset($input_errors);
-	unset($sig_warning);
-
-	if (stristr($_POST['Submit'], gettext("Enable"))) {
-		$mode = "enable";
-	} else if (stristr($_POST['Submit'], gettext("Disable"))) {
-		$mode = "disable";
-	} else if (stristr($_POST['Submit'], gettext("Upgrade")) || $_POST['sig_override']) {
-		$mode = "upgrade";
-	} else if ($_POST['sig_no']) {
-		if (file_exists("{$g['upload_path']}/firmware.tgz")) {
-			unlink("{$g['upload_path']}/firmware.tgz");
-		}
-	}
-	if ($mode) {
-		if ($mode == "enable") {
-			conf_mount_rw();
-			mark_subsystem_dirty('firmware');
-		} else if ($mode == "disable") {
-			conf_mount_ro();
-			clear_subsystem_dirty('firmware');
-		} else if ($mode == "upgrade") {
-			if ($_FILES['ulfile']['error']) {
-				$errortext = "(" . file_upload_error_message($_FILES['ulfile']['error']) . ")";
-			}
-			if (is_uploaded_file($_FILES['ulfile']['tmp_name'])) {
-				/* verify firmware image(s) */
-				if (file_is_for_platform($_FILES['ulfile']['tmp_name'], $_FILES['ulfile']['name']) == false && !$_POST['sig_override']) {
-					$input_errors[] = gettext("The uploaded image file is not for this platform.");
-				} else if (!file_exists($_FILES['ulfile']['tmp_name'])) {
-					/* probably out of memory for the MFS */
-					$input_errors[] = gettext("Image upload failed (out of memory?)");
-					mwexec("/etc/rc.firmware disable");
-					clear_subsystem_dirty('firmware');
-				} else {
-					/* move the image so PHP won't delete it */
-					rename($_FILES['ulfile']['tmp_name'], "{$g['upload_path']}/firmware.tgz");
-
-					/* check digital signature */
-					$sigchk = verify_digital_signature("{$g['upload_path']}/firmware.tgz");
-
-					if ($sigchk == 1) {
-						$sig_warning = gettext("The digital signature on this image is invalid.");
-					} else if ($sigchk == 2 && !isset($config['system']['firmware']['allowinvalidsig'])) {
-						$sig_warning = gettext("This image is not digitally signed.");
-					} else if (($sigchk >= 3)) {
-						$sig_warning = gettext("There has been an error verifying the signature on this image.");
-					}
-
-					if (!verify_gzip_file("{$g['upload_path']}/firmware.tgz")) {
-						$input_errors[] = gettext("The image file is corrupt.");
-						unlink("{$g['upload_path']}/firmware.tgz");
-					}
-				}
-			}
-
-			run_plugins("/usr/local/pkg/firmware_upgrade");
-
-			/* Check for input errors, firmware locks, warnings, then check for firmware if sig_override is set */
-			if (!$input_errors && !is_subsystem_dirty('firmwarelock') && (!$sig_warning || $_POST['sig_override'])) {
-				if (file_exists("{$g['upload_path']}/firmware.tgz")) {
-					/* fire up the update script in the background */
-					mark_subsystem_dirty('firmwarelock');
-					$savemsg = gettext("The firmware is now being updated. The firewall will reboot automatically.");
-					if (stristr($_FILES['ulfile']['name'], "nanobsd") or $_POST['isnano'] == "yes") {
-						mwexec_bg("/etc/rc.firmware pfSenseNanoBSDupgrade {$g['upload_path']}/firmware.tgz");
-					} else {
-						if ($g['platform'] == "nanobsd") {
-							$whichone = "pfSenseNanoBSDupgrade";
-						} else {
-							$whichone = "pfSenseupgrade";
-						}
-						mwexec_bg("/etc/rc.firmware {$whichone} {$g['upload_path']}/firmware.tgz");
-						unset($whichone);
-					}
-				} else {
-					$savemsg = sprintf(gettext("Firmware image missing or other error, please try again %s."), $errortext);
-				}
-			}
-		}
-	}
-}
-
-$pgtitle = array(gettext("System"), gettext("Firmware"));
-include("head.inc");
-
-if ($input_errors)
-	print_input_errors($input_errors);
-
-if ($savemsg)
-	print_info_box($savemsg);
-
-if ($fwinfo != "")
-	print_info_box($fwinfo);
-
-$tab_array = array();
-$tab_array[] = array(gettext("Manual Update"), true, "system_firmware.php");
-$tab_array[] = array(gettext("Auto Update"), false, "system_firmware_check.php");
-$tab_array[] = array(gettext("Updater Settings"), false, "system_firmware_settings.php");
-
-display_top_tabs($tab_array);
-
-// For a simple yes/no we can use an HTML form
-if ($sig_warning && !$input_errors) {
-	$sig_warning = gettext("The image you uploaded " .
-		"is not an official/supported image and may lead to unexpected behavior or security " .
-		"compromises. Only install images that come from sources that you trust, and make sure ".
-		"that the image has not been tampered with.") . "<br /><br />".
-		gettext("Do you want to install this image anyway (on your own risk)?");
-
-	print_info_box($sig_warning);
-?>
-	<form action="system_firmware.php" method="post" enctype="multipart/form-data">
-		<input name="sig_override" type="submit" class="btn btn-danger" id="sig_override" value=" <?=gettext("Yes");?> " />
-		<input name="sig_no" type="submit" class="btn btn-default" id="sig_no" value=" <?=gettext("No"); ?> " />
-	</form>
-<?php
-
-} else {
-	// This is where the work gets done so Forms.classes will be used from this point
-	if (!is_subsystem_dirty('firmwarelock')) {
-		require_once('classes/Form.class.php');
-
-		if (!is_subsystem_dirty('rebootreq')) {
-			// Provide a button to enable firmware upgrades. Upgrades should be disabled on initial page load
-			if (!is_subsystem_dirty('firmware') || !$_POST || $_POST['save']) {
-				$enablebtn = new Form_Button(
-					'Submit',
-					'Enable firmware upload'
-					);
-
-				$enablebtn->addClass('btn-warning');
-				$form = new Form($enablebtn);
-				$section = new Form_Section('Invoke ' . $g['product_name'] .' Manual Upgrade');
-				$section->addInput(new Form_StaticText('Enable', 'Click the "Enable firmware upload" button below to begin.'));
-			}
-			else {
-				// Upgrades are now enabled
-				$form = new Form('Disable firmware upload');
-
-				$form->setMultipartEncoding();
-
-				$section = new Form_Section('Perform ' . $g['product_name'] .' Manual Upgrade');
-
-				if (!session_id())
-					$upload_id = uniqid();
-				else
-					$upload_id = session_id();
-
-				$section->addInput(new Form_Input(
-					'UPLOAD_IDENTIFIER',
-					'',
-					'hidden',
-					$upload_id
-					));
-
-				if(stristr($_FILES['ulfile']['name'],"nanobsd")) {
-					$section->addInput(new Form_Input(
-						'isnano',
-						'',
-						'hidden',
-						'yes'
-						));
-				}
-
-				if ($g['platform'] == "nanobsd")
-					$type = "*.img.gz";
-				else
-					$type = "*.tgz";
-
-				$filepicker = new Form_Input(
-					'ulfile',
-					'File to upload (' . $type . ')',
-					'file',
-					''
-				);
-
-				$section->addInput($filepicker)->setHelp('Choose the file you wish to upload');
-
-				if ($g['hidebackupbeforeupgrade'] === false) {
-					$section->addInput(new Form_Checkbox(
-						'backupbeforeupgrade',
-						Backup,
-						'Perform a full backup prior to upgrade',
-						false
-					));
-				}
-
-				$section->addInput(new Form_Button(
-					'Submit',
-					'Upgrade firmware'
-				))->addClass('btn-danger btn-sm')->setHelp('Click the "Upgrade firmware" button above to start the upgrade process');
-			}
-
-			$form->add($section);
-			print($form);
-		}
-	}
-	else {
-		print_info_box('<strong>' . gettext("You must reboot the system before you can upgrade the firmware.") . '</strong>');
-	}
-
-	if (is_subsystem_dirty('firmware') && !is_subsystem_dirty('firmwarelock')) {
-		print_info_box('<strong>' . gettext("DO NOT ") . '</strong>' . gettext('abort the firmware upgrade once it ' .
-			'has started. The firewall will reboot automatically after ' .
-			'storing the new firmware. The configuration will be maintained.'));
-	}
-}
-
-include("foot.inc"); ?>