Remove /etc/gettytab

1 files changed, 0 insertions, 235 deletions

diff --git a/src/etc/gettytab b/src/etc/gettytab
deleted file mode 100644
index 5af5aae..0000000
--- a/src/etc/gettytab
+++ /dev/null
@@ -1,235 +0,0 @@
-# $FreeBSD: stable/10/etc/gettytab 241708 2012-10-18 22:20:02Z peterj $
-#	from: @(#)gettytab	5.14 (Berkeley) 3/27/91
-#
-# Most of the table entries here are just copies of the old getty table,
-# it is by no means certain, or even likely, that any of them are optimal
-# for any purpose whatever.  Nor is it likely that more than a couple are
-# even correct.
-#
-# The default gettytab entry, used to set defaults for all other
-# entries, and in cases where getty is called with no table name.
-#
-# cb, ce and ck are desirable on most crt's.  The non-crt entries need to
-# be changed to turn them off (:cb@:ce@:ck@:).
-#
-# lc should always be on; it's a remainder of some stone age when there
-# have been terminals around not being able of handling lower-case
-# characters. Those terminals aren't supported any longer, but getty is
-# `smart' about them by default.
-#
-# Parity defaults to even, but the Pc entry and all the `std' entries
-# specify no parity.   The different parities are:
-#     (none): same as ep for getty.  login will use terminal as is.
-#     ep:     getty will use raw mode (cs8 -parenb) (unless rw is set) and
-#             fake parity.  login will use even parity (cs7 parenb -parodd).
-#     op:     same as ep except odd parity (cs7 parenb parodd) for login.
-#             getty will fake odd parity as well.
-#     ap:     same as ep except -inpck instead of inpck for login.
-#             ap overrides op and ep.
-#     np:     1. don't fake parity in getty.  The fake parity garbles
-#                characters on non-terminals (like pccons) that don't
-#                support parity.  It would probably better for getty not to
-#                try to fake parity.  It could just use cbreak mode so as
-#                not to force cs8 and let the hardware handle the parity.
-#                login has to be rely on the hardware anyway.
-#             2. set cs8 -parenb -istrip -inpck.
-#     ep:op:  same as ap.
-#
-default:\
-	:cb:ce:ck:lc:fd#1000:im=\r\n%s/%m (%h) (%t)\r\n\r\n:sp#1200:\
-	:if=/etc/issue:
-
-#
-# Fixed speed entries
-#
-#	The "std.NNN" names are known to the special case
-#	portselector code in getty, however they can
-#	be assigned to any table desired.
-#	The "NNN-baud" names are known to the special case
-#	autobaud code in getty, and likewise can
-#	be assigned to any table desired (hopefully the same speed).
-#
-a|std.110|110-baud:\
-	:np:nd#1:cd#1:uc:sp#110:
-b|std.134|134.5-baud:\
-	:np:nd#1:cd#2:ff#1:td#1:sp#134:ht:nl:
-1|std.150|150-baud:\
-	:np:nd#1:cd#2:td#1:fd#1:sp#150:ht:nl:lm=\E\72\6\6\17login\72 :
-c|std.300|300-baud:\
-	:np:nd#1:cd#1:sp#300:
-d|std.600|600-baud:\
-	:np:nd#1:cd#1:sp#600:
-f|std.1200|1200-baud:\
-	:np:fd#1:sp#1200:
-6|std.2400|2400-baud:\
-	:np:sp#2400:
-7|std.4800|4800-baud:\
-	:np:sp#4800:
-2|std.9600|9600-baud:\
-	:np:sp#9600:
-g|std.19200|19200-baud:\
-	:np:sp#19200:
-std.38400|38400-baud:\
-	:np:sp#38400:
-std.57600|57600-baud:\
-	:np:sp#57600:
-std.115200|115200-baud:\
-	:np:sp#115200:
-std.230400|230400-baud:\
-	:np:sp#230400:
-
-#
-# Entry specifying explicit device settings.  See termios(4) and
-# /usr/include/termios.h, too.  The entry forces the tty into
-# CLOCAL mode (so no DCD is required), and uses Xon/Xoff flow control.
-#
-# cflags: CLOCAL | HUPCL | CREAD | CS8
-# oflags: OPOST | ONLCR | OXTABS
-# iflags: IXOFF | IXON | ICRNL | IGNPAR
-# lflags: IEXTEN | ICANON | ISIG | ECHOCTL | ECHO | ECHOK | ECHOE | ECHOKE
-#
-# The `0' flags don't have input enabled.  The `1' flags don't echo.
-# (Echoing is done inside getty itself.)
-#
-local.9600|CLOCAL tty @ 9600 Bd:\
-	:c0#0x0000c300:c1#0x0000cb00:c2#0x0000cb00:\
-	:o0#0x00000007:o1#0x00000002:o2#0x00000007:\
-	:i0#0x00000704:i1#0x00000000:i2#0x00000704:\
-	:l0#0x000005cf:l1#0x00000000:l2#0x000005cf:\
-	:sp#9600:np:
-
-#
-# Dial in rotary tables, speed selection via 'break'
-#
-0|d300|Dial-300:\
-	:nx=d1200:cd#2:sp#300:
-d1200|Dial-1200:\
-	:nx=d150:fd#1:sp#1200:
-d150|Dial-150:\
-	:nx=d110:lm@:tc=150-baud:
-d110|Dial-110:\
-	:nx=d300:tc=300-baud:
-
-#
-# Fast dialup terminals, 2400/1200/300 rotary (can start either way)
-#
-D2400|d2400|Fast-Dial-2400:\
-	:nx=D1200:tc=2400-baud:
-3|D1200|Fast-Dial-1200:\
-	:nx=D300:tc=1200-baud:
-5|D300|Fast-Dial-300:\
-	:nx=D2400:tc=300-baud:
-
-#
-#telebit (19200)
-#
-t19200:\
-	:nx=t2400:tc=19200-baud:
-t2400:\
-	:nx=t1200:tc=2400-baud:
-t1200:\
-	:nx=t19200:tc=1200-baud:
-
-#
-#telebit (9600)
-#
-t9600:\
-	:nx=t2400a:tc=9600-baud:
-t2400a:\
-	:nx=t1200a:tc=2400-baud:
-t1200a:\
-	:nx=t9600:tc=1200-baud:
-
-#
-# Odd special case terminals
-#
--|tty33|asr33|Pity the poor user of this beast:\
-	:tc=110-baud:
-
-4|Console|Console Decwriter II:\
-	:nd@:cd@:rw:tc=300-baud:
-
-e|Console-1200|Console Decwriter III:\
-	:fd@:nd@:cd@:rw:tc=1200-baud:
-
-i|Interdata console:\
-	:uc:sp#0:
-
-l|lsi chess terminal:\
-	:sp#300:
-
-X|Xwindow|X window system:\
-	:fd@:nd@:cd@:rw:sp#9600:
-
-P|Pc|Pc console:\
-	:ht:np:sp#9600:
-
-al.Pc:\
-	:ht:np:sp#9600:al=root:
-
-# Weirdo special case for fast crt's with hardcopy devices
-#
-8|T9600|CRT with hardcopy:\
-	:nx=T300:tc=9600-baud:
-9|T300|CRT with hardcopy (300):\
-	:nx=T9600:tc=300-baud:
-
-#
-# Plugboard, and misc other terminals
-#
-plug-9600|Plugboard-9600:\
-	:pf#1:tc=9600-baud:
-p|P9600|Plugboard-9600-rotary:\
-	:pf#1:nx=P300:tc=9600-baud:
-q|P300|Plugboard-300:\
-	:pf#1:nx=P1200:tc=300-baud:
-r|P1200|Plugboard-1200:\
-	:pf#1:nx=P9600:tc=1200-baud:
-
-#
-# XXXX Port selector
-#
-s|DSW|Port Selector:\
-	:ps:sp#2400:
-
-#
-# Auto-baud speed detect entry for Micom 600.
-# Special code in getty will switch this out
-# to one of the NNN-baud entries.
-#
-A|Auto-baud:\
-	:ab:sp#2400:f0#040:
-
-#
-# autologin - automatically log in as root
-#
-
-autologin|al.9600:\
-	:al=root:tc=std.9600:
-al.19200:\
-	:al=root:tc=std.19200:
-al.38400:\
-	:al=root:tc=std.38400:
-al.57600:\
-	:al=root:tc=std.57600:
-al.115200:\
-	:al=root:tc=std.115200:
-al.230400:\
-	:al=root:tc=std.230400:
-
-#
-# Entries for 3-wire serial terminals.  These don't supply carrier, so
-# clocal needs to be set, and crtscts needs to be unset.
-#
-3wire.9600|9600-3wire:\
-	:np:nc:sp#9600:
-3wire.19200|19200-3wire:\
-	:np:nc:sp#19200:
-3wire.38400|38400-3wire:\
-	:np:nc:sp#38400:
-3wire.57600|57600-3wire:\
-	:np:nc:sp#57600:
-3wire.115200|115200-3wire:\
-	:np:nc:sp#115200:
-3wire.230400|230400-3wire:\
-	:np:nc:sp#230400: