Merge tag 'sound-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound update from Takashi Iwai:
 "This is a fairly quiet release in all sound area.  Only a little bit
  of changes in the core side while most of changes are seen in the
  drivers.

  HD-audio:
   - A few new codec additions for Nvidia, Realtek and VIA
   - Intel Haswell audio support
   - Support for "phantom" jacks for consistent jack reporting
   - Major clean-ups in HDMI/DP driver codes
   - A workaround for inverted digital-mic pins with Realtek codecs
   - Removal of beep_mode=2 option

  ASoC:
   - Added the ability to add and remove DAPM paths dynamically, mostly
     for reparenting on clock changes
   - New machine drivers for Marvell Brownstone, ST-Ericsson Ux500
     reference platform and ttc-dkp
   - New CPU drivers for Blackfin BF6xx SPORTs in I2S mode, Marvell MMP,
     Synopsis Designware I2S controllers, and SPEAr DMA and S/PDIF
   - New CODEC drivers for Dialog DA732x, ST STA529, ST-Ericsson AB8500,
     TI Isabelle and Wolfson Microelectronics WM5102 and WM5110
   - DAPM fixes for the recent locking changes
   - Fix for _PRE and _POST widgets (which have been broken for a few
     releases now)
   - A couple of minor driver updates

  Misc
   - Conversion to new dev_pm_ops in platform and PCI drivers
   - LTC support and some fixes in PCXHR driver
   - A few fixes and PM support for ISA OPti9xx and WSS cards
   - Some TLV code cleanup
   - Move driver-specific headers from include/sound to local dirs"

* tag 'sound-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (212 commits)
  ASoC: dapm: Fix _PRE and _POST events for DAPM performance improvements
  ALSA: hda - add dock support for Thinkpad X230 Tablet
  ALSA: hda - Turn on PIN_OUT from hdmi playback prepare.
  ASoC imx-audmux: add MX31_AUDMUX_PORT7_SSI_PINS_7 define
  ASoC: littlemill: Add userspace control of the WM1250 I/O
  ASoC: wm8994: Update micdet for irqdomain conversion
  ALSA: hda - make sure alc268 does not OOPS on codec parse
  ALSA: hda - Add support for Realtek ALC282
  ALSA: hda - Fix index number conflicts of phantom jacks
  ALSA: opti9xx: Fix section mismatch by PM support
  ALSA: snd-opti9xx: Implement suspend/resume
  ALSA: hda - Add new GPU codec ID to snd-hda
  ALSA: hda - Fix driver type of Haswell controller to AZX_DRIVER_SCH
  ALSA: hda - add Haswell HDMI codec id
  ALSA: hda - Add DeviceID for Haswell HDA
  ALSA: wss_lib: Fix resume on Yamaha OPL3-SAx
  ALSA: wss_lib: fix suspend/resume
  ALSA: es1938: replace TLV_DB_RANGE_HEAD with DECLARE_TLV_DB_RANGE
  ALSA: tlv: add DECLARE_TLV_DB_RANGE()
  ALSA: tlv: add DECLARE_TLV_CONTAINER()
  ...

1 files changed, 72 insertions, 14 deletions

diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c
index d7ccf28..f8fbe22 100644
--- a/sound/isa/opti9xx/opti92x-ad1848.c
+++ b/sound/isa/opti9xx/opti92x-ad1848.c
@@ -135,10 +135,9 @@ struct snd_opti9xx {
 	unsigned long mc_base_size;
 #ifdef OPTi93X
 	unsigned long mc_indir_index;
-	unsigned long mc_indir_size;
 	struct resource *res_mc_indir;
-	struct snd_wss *codec;
 #endif	/* OPTi93X */
+	struct snd_wss *codec;
 	unsigned long pwd_reg;
 
 	spinlock_t lock;
@@ -245,10 +244,8 @@ static int __devinit snd_opti9xx_init(struct snd_opti9xx *chip,
 	case OPTi9XX_HW_82C931:
 	case OPTi9XX_HW_82C933:
 		chip->mc_base = (hardware == OPTi9XX_HW_82C930) ? 0xf8f : 0xf8d;
-		if (!chip->mc_indir_index) {
+		if (!chip->mc_indir_index)
 			chip->mc_indir_index = 0xe0e;
-			chip->mc_indir_size = 2;
-		}
 		chip->password = 0xe4;
 		chip->pwd_reg = 0;
 		break;
@@ -351,7 +348,7 @@ static void snd_opti9xx_write(struct snd_opti9xx *chip, unsigned char reg,
 		(snd_opti9xx_read(chip, reg) & ~(mask)) | ((value) & (mask)))
 
 
-static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip,
+static int snd_opti9xx_configure(struct snd_opti9xx *chip,
 					   long port,
 					   int irq, int dma1, int dma2,
 					   long mpu_port, int mpu_irq)
@@ -403,7 +400,9 @@ static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip,
 
 #else	/* OPTi93X */
 	case OPTi9XX_HW_82C931:
-	case OPTi9XX_HW_82C933:
+		/* disable 3D sound (set GPIO1 as output, low) */
+		snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(20), 0x04, 0x0c);
+	case OPTi9XX_HW_82C933: /* FALL THROUGH */
 		/*
 		 * The BTC 1817DW has QS1000 wavetable which is connected
 		 * to the serial digital input of the OPTI931.
@@ -696,8 +695,7 @@ static int __devinit snd_opti9xx_read_check(struct snd_opti9xx *chip)
 		if (value == snd_opti9xx_read(chip, OPTi9XX_MC_REG(1)))
 			return 0;
 #else	/* OPTi93X */
-	chip->res_mc_indir = request_region(chip->mc_indir_index,
-					    chip->mc_indir_size,
+	chip->res_mc_indir = request_region(chip->mc_indir_index, 2,
 					    "OPTi93x MC");
 	if (chip->res_mc_indir == NULL)
 		return -EBUSY;
@@ -770,8 +768,9 @@ static int __devinit snd_card_opti9xx_pnp(struct snd_opti9xx *chip,
 #ifdef OPTi93X
 	port = pnp_port_start(pdev, 0) - 4;
 	fm_port = pnp_port_start(pdev, 1) + 8;
-	chip->mc_indir_index = pnp_port_start(pdev, 3) + 2;
-	chip->mc_indir_size = pnp_port_len(pdev, 3) - 2;
+	/* adjust mc_indir_index - some cards report it at 0xe?d,
+	   other at 0xe?c but it really is always at 0xe?e */
+	chip->mc_indir_index = (pnp_port_start(pdev, 3) & ~0xf) | 0xe;
 #else
 	devmc = pnp_request_card_device(card, pid->devs[2].id, NULL);
 	if (devmc == NULL)
@@ -871,9 +870,7 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card)
 			       &codec);
 	if (error < 0)
 		return error;
-#ifdef OPTi93X
 	chip->codec = codec;
-#endif
 	error = snd_wss_pcm(codec, 0, &pcm);
 	if (error < 0)
 		return error;
@@ -1054,11 +1051,55 @@ static int __devexit snd_opti9xx_isa_remove(struct device *devptr,
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int snd_opti9xx_suspend(struct snd_card *card)
+{
+	struct snd_opti9xx *chip = card->private_data;
+
+	snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
+	chip->codec->suspend(chip->codec);
+	return 0;
+}
+
+static int snd_opti9xx_resume(struct snd_card *card)
+{
+	struct snd_opti9xx *chip = card->private_data;
+	int error, xdma2;
+#if defined(CS4231) || defined(OPTi93X)
+	xdma2 = dma2;
+#else
+	xdma2 = -1;
+#endif
+
+	error = snd_opti9xx_configure(chip, port, irq, dma1, xdma2,
+				      mpu_port, mpu_irq);
+	if (error)
+		return error;
+	chip->codec->resume(chip->codec);
+	snd_power_change_state(card, SNDRV_CTL_POWER_D0);
+	return 0;
+}
+
+static int snd_opti9xx_isa_suspend(struct device *dev, unsigned int n,
+				   pm_message_t state)
+{
+	return snd_opti9xx_suspend(dev_get_drvdata(dev));
+}
+
+static int snd_opti9xx_isa_resume(struct device *dev, unsigned int n)
+{
+	return snd_opti9xx_resume(dev_get_drvdata(dev));
+}
+#endif
+
 static struct isa_driver snd_opti9xx_driver = {
 	.match		= snd_opti9xx_isa_match,
 	.probe		= snd_opti9xx_isa_probe,
 	.remove		= __devexit_p(snd_opti9xx_isa_remove),
-	/* FIXME: suspend/resume */
+#ifdef CONFIG_PM
+	.suspend	= snd_opti9xx_isa_suspend,
+	.resume		= snd_opti9xx_isa_resume,
+#endif
 	.driver		= {
 		.name	= DEV_NAME
 	},
@@ -1124,12 +1165,29 @@ static void __devexit snd_opti9xx_pnp_remove(struct pnp_card_link * pcard)
 	snd_opti9xx_pnp_is_probed = 0;
 }
 
+#ifdef CONFIG_PM
+static int snd_opti9xx_pnp_suspend(struct pnp_card_link *pcard,
+				   pm_message_t state)
+{
+	return snd_opti9xx_suspend(pnp_get_card_drvdata(pcard));
+}
+
+static int snd_opti9xx_pnp_resume(struct pnp_card_link *pcard)
+{
+	return snd_opti9xx_resume(pnp_get_card_drvdata(pcard));
+}
+#endif
+
 static struct pnp_card_driver opti9xx_pnpc_driver = {
 	.flags		= PNP_DRIVER_RES_DISABLE,
 	.name		= "opti9xx",
 	.id_table	= snd_opti9xx_pnpids,
 	.probe		= snd_opti9xx_pnp_probe,
 	.remove		= __devexit_p(snd_opti9xx_pnp_remove),
+#ifdef CONFIG_PM
+	.suspend	= snd_opti9xx_pnp_suspend,
+	.resume		= snd_opti9xx_pnp_resume,
+#endif
 };
 #endif