From 10a3061accd897c9e4e3821cbd501660ac482497 Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Fri, 15 Jun 2012 20:55:54 +0200 Subject: ALSA: snd-opti9xx: fixes for MED3931 card (opti931) MED3931 card did not work (failed with "OPTI chip not found") because snd-opti9xx gets mc_indir_index from pnp by adding 2 to the pnp-reported port. It probably works for some cards but not for this one. Datasheet says that the port is always at 0xe?e so just force the lowest nibble to be 0xe. Also this card powers up with (ugly) 3D sound enabled. As there's no mixer control for this, just disable it. Signed-off-by: Ondrej Zary Signed-off-by: Takashi Iwai --- sound/isa/opti9xx/opti92x-ad1848.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) (limited to 'sound/isa/opti9xx/opti92x-ad1848.c') diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c index d7ccf28..ecc68df 100644 --- a/sound/isa/opti9xx/opti92x-ad1848.c +++ b/sound/isa/opti9xx/opti92x-ad1848.c @@ -135,7 +135,6 @@ struct snd_opti9xx { unsigned long mc_base_size; #ifdef OPTi93X unsigned long mc_indir_index; - unsigned long mc_indir_size; struct resource *res_mc_indir; struct snd_wss *codec; #endif /* OPTi93X */ @@ -245,10 +244,8 @@ static int __devinit snd_opti9xx_init(struct snd_opti9xx *chip, case OPTi9XX_HW_82C931: case OPTi9XX_HW_82C933: chip->mc_base = (hardware == OPTi9XX_HW_82C930) ? 0xf8f : 0xf8d; - if (!chip->mc_indir_index) { + if (!chip->mc_indir_index) chip->mc_indir_index = 0xe0e; - chip->mc_indir_size = 2; - } chip->password = 0xe4; chip->pwd_reg = 0; break; @@ -403,7 +400,9 @@ static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip, #else /* OPTi93X */ case OPTi9XX_HW_82C931: - case OPTi9XX_HW_82C933: + /* disable 3D sound (set GPIO1 as output, low) */ + snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(20), 0x04, 0x0c); + case OPTi9XX_HW_82C933: /* FALL THROUGH */ /* * The BTC 1817DW has QS1000 wavetable which is connected * to the serial digital input of the OPTI931. @@ -696,8 +695,7 @@ static int __devinit snd_opti9xx_read_check(struct snd_opti9xx *chip) if (value == snd_opti9xx_read(chip, OPTi9XX_MC_REG(1))) return 0; #else /* OPTi93X */ - chip->res_mc_indir = request_region(chip->mc_indir_index, - chip->mc_indir_size, + chip->res_mc_indir = request_region(chip->mc_indir_index, 2, "OPTi93x MC"); if (chip->res_mc_indir == NULL) return -EBUSY; @@ -770,8 +768,9 @@ static int __devinit snd_card_opti9xx_pnp(struct snd_opti9xx *chip, #ifdef OPTi93X port = pnp_port_start(pdev, 0) - 4; fm_port = pnp_port_start(pdev, 1) + 8; - chip->mc_indir_index = pnp_port_start(pdev, 3) + 2; - chip->mc_indir_size = pnp_port_len(pdev, 3) - 2; + /* adjust mc_indir_index - some cards report it at 0xe?d, + other at 0xe?c but it really is always at 0xe?e */ + chip->mc_indir_index = (pnp_port_start(pdev, 3) & ~0xf) | 0xe; #else devmc = pnp_request_card_device(card, pid->devs[2].id, NULL); if (devmc == NULL) -- cgit v1.1 From 5dd250728aa4cad49cfa18eb8ed11ba470ce382a Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Tue, 17 Jul 2012 09:16:44 +0200 Subject: ALSA: snd-opti9xx: Implement suspend/resume Implement suspend/resume support for Opti 92x and 93x chips. Tested with Opti 929A+AD1848 and Opti 931. Signed-off-by: Ondrej Zary Signed-off-by: Takashi Iwai --- sound/isa/opti9xx/opti92x-ad1848.c | 67 +++++++++++++++++++++++++++++++++++--- 1 file changed, 63 insertions(+), 4 deletions(-) (limited to 'sound/isa/opti9xx/opti92x-ad1848.c') diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c index ecc68df..d7ce012 100644 --- a/sound/isa/opti9xx/opti92x-ad1848.c +++ b/sound/isa/opti9xx/opti92x-ad1848.c @@ -136,8 +136,8 @@ struct snd_opti9xx { #ifdef OPTi93X unsigned long mc_indir_index; struct resource *res_mc_indir; - struct snd_wss *codec; #endif /* OPTi93X */ + struct snd_wss *codec; unsigned long pwd_reg; spinlock_t lock; @@ -870,9 +870,7 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card) &codec); if (error < 0) return error; -#ifdef OPTi93X chip->codec = codec; -#endif error = snd_wss_pcm(codec, 0, &pcm); if (error < 0) return error; @@ -1053,11 +1051,55 @@ static int __devexit snd_opti9xx_isa_remove(struct device *devptr, return 0; } +#ifdef CONFIG_PM +static int snd_opti9xx_suspend(struct snd_card *card) +{ + struct snd_opti9xx *chip = card->private_data; + + snd_power_change_state(card, SNDRV_CTL_POWER_D3hot); + chip->codec->suspend(chip->codec); + return 0; +} + +static int snd_opti9xx_resume(struct snd_card *card) +{ + struct snd_opti9xx *chip = card->private_data; + int error, xdma2; +#if defined(CS4231) || defined(OPTi93X) + xdma2 = dma2; +#else + xdma2 = -1; +#endif + + error = snd_opti9xx_configure(chip, port, irq, dma1, xdma2, + mpu_port, mpu_irq); + if (error) + return error; + chip->codec->resume(chip->codec); + snd_power_change_state(card, SNDRV_CTL_POWER_D0); + return 0; +} + +static int snd_opti9xx_isa_suspend(struct device *dev, unsigned int n, + pm_message_t state) +{ + return snd_opti9xx_suspend(dev_get_drvdata(dev)); +} + +static int snd_opti9xx_isa_resume(struct device *dev, unsigned int n) +{ + return snd_opti9xx_resume(dev_get_drvdata(dev)); +} +#endif + static struct isa_driver snd_opti9xx_driver = { .match = snd_opti9xx_isa_match, .probe = snd_opti9xx_isa_probe, .remove = __devexit_p(snd_opti9xx_isa_remove), - /* FIXME: suspend/resume */ +#ifdef CONFIG_PM + .suspend = snd_opti9xx_isa_suspend, + .resume = snd_opti9xx_isa_resume, +#endif .driver = { .name = DEV_NAME }, @@ -1123,12 +1165,29 @@ static void __devexit snd_opti9xx_pnp_remove(struct pnp_card_link * pcard) snd_opti9xx_pnp_is_probed = 0; } +#ifdef CONFIG_PM +static int snd_opti9xx_pnp_suspend(struct pnp_card_link *pcard, + pm_message_t state) +{ + return snd_opti9xx_suspend(pnp_get_card_drvdata(pcard)); +} + +static int snd_opti9xx_pnp_resume(struct pnp_card_link *pcard) +{ + return snd_opti9xx_resume(pnp_get_card_drvdata(pcard)); +} +#endif + static struct pnp_card_driver opti9xx_pnpc_driver = { .flags = PNP_DRIVER_RES_DISABLE, .name = "opti9xx", .id_table = snd_opti9xx_pnpids, .probe = snd_opti9xx_pnp_probe, .remove = __devexit_p(snd_opti9xx_pnp_remove), +#ifdef CONFIG_PM + .suspend = snd_opti9xx_pnp_suspend, + .resume = snd_opti9xx_pnp_resume, +#endif }; #endif -- cgit v1.1 From 59b1f084abd8690ffe68c67758ad08bbcb7d1af0 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 17 Jul 2012 12:14:17 +0200 Subject: ALSA: opti9xx: Fix section mismatch by PM support In the previous commit, snd_opti9xx_configure() is called from the resume handler but it's still marked as __devinit. Fix it. Reported-by: Fengguang Wu Signed-off-by: Takashi Iwai --- sound/isa/opti9xx/opti92x-ad1848.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'sound/isa/opti9xx/opti92x-ad1848.c') diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c index d7ce012..f8fbe22 100644 --- a/sound/isa/opti9xx/opti92x-ad1848.c +++ b/sound/isa/opti9xx/opti92x-ad1848.c @@ -348,7 +348,7 @@ static void snd_opti9xx_write(struct snd_opti9xx *chip, unsigned char reg, (snd_opti9xx_read(chip, reg) & ~(mask)) | ((value) & (mask))) -static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip, +static int snd_opti9xx_configure(struct snd_opti9xx *chip, long port, int irq, int dma1, int dma2, long mpu_port, int mpu_irq) -- cgit v1.1