diff options
Diffstat (limited to 'src/roms/u-boot/scripts/Makefile.build')
| -rw-r--r-- | src/roms/u-boot/scripts/Makefile.build | 516 |
1 files changed, 516 insertions, 0 deletions
diff --git a/src/roms/u-boot/scripts/Makefile.build b/src/roms/u-boot/scripts/Makefile.build new file mode 100644 index 0000000..6416c1a --- /dev/null +++ b/src/roms/u-boot/scripts/Makefile.build @@ -0,0 +1,516 @@ +# ========================================================================== +# Building +# ========================================================================== + +# Modified for U-Boot +ifeq ($(CONFIG_TPL_BUILD),y) + src := $(patsubst tpl/%,%,$(obj)) +else + ifeq ($(CONFIG_SPL_BUILD),y) + src := $(patsubst spl/%,%,$(obj)) + else + src := $(obj) + endif +endif + +PHONY := __build +__build: + +# Init all relevant variables used in kbuild files so +# 1) they have correct type +# 2) they do not inherit any value from the environment +obj-y := +obj-m := +lib-y := +lib-m := +always := +targets := +subdir-y := +subdir-m := +EXTRA_AFLAGS := +EXTRA_CFLAGS := +EXTRA_CPPFLAGS := +EXTRA_LDFLAGS := +asflags-y := +ccflags-y := +cppflags-y := +ldflags-y := + +subdir-asflags-y := +subdir-ccflags-y := + +# Read auto.conf if it exists, otherwise ignore +-include include/config/auto.conf + +# Added for U-Boot: Load U-Boot configuration +ifeq ($(CONFIG_TPL_BUILD),y) + -include include/tpl-autoconf.mk +else + ifeq ($(CONFIG_SPL_BUILD),y) + -include include/spl-autoconf.mk + else + -include include/autoconf.mk + endif +endif + +include scripts/Kbuild.include + +# For backward compatibility check that these variables do not change +save-cflags := $(CFLAGS) + +# The filename Kbuild has precedence over Makefile +kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src)) +kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile) +include $(kbuild-file) + +# Added for U-Boot +asflags-y += $(PLATFORM_CPPFLAGS) +ccflags-y += $(PLATFORM_CPPFLAGS) +cppflags-y += $(PLATFORM_CPPFLAGS) + +# If the save-* variables changed error out +ifeq ($(KBUILD_NOPEDANTIC),) + ifneq ("$(save-cflags)","$(CFLAGS)") + $(error CFLAGS was changed in "$(kbuild-file)". Fix it to use ccflags-y) + endif +endif + +# +# make W=... settings +# +# W=1 - warnings that may be relevant and does not occur too often +# W=2 - warnings that occur quite often but may still be relevant +# W=3 - the more obscure warnings, can most likely be ignored +# +# $(call cc-option, -W...) handles gcc -W.. options which +# are not supported by all versions of the compiler +ifdef KBUILD_ENABLE_EXTRA_GCC_CHECKS +warning- := $(empty) + +warning-1 := -Wextra -Wunused -Wno-unused-parameter +warning-1 += -Wmissing-declarations +warning-1 += -Wmissing-format-attribute +warning-1 += $(call cc-option, -Wmissing-prototypes) +warning-1 += -Wold-style-definition +warning-1 += $(call cc-option, -Wmissing-include-dirs) +warning-1 += $(call cc-option, -Wunused-but-set-variable) +warning-1 += $(call cc-disable-warning, missing-field-initializers) + +# Clang +warning-1 += $(call cc-disable-warning, initializer-overrides) +warning-1 += $(call cc-disable-warning, unused-value) +warning-1 += $(call cc-disable-warning, format) +warning-1 += $(call cc-disable-warning, unknown-warning-option) +warning-1 += $(call cc-disable-warning, sign-compare) +warning-1 += $(call cc-disable-warning, format-zero-length) +warning-1 += $(call cc-disable-warning, uninitialized) +warning-1 += $(call cc-option, -fcatch-undefined-behavior) + +warning-2 := -Waggregate-return +warning-2 += -Wcast-align +warning-2 += -Wdisabled-optimization +warning-2 += -Wnested-externs +warning-2 += -Wshadow +warning-2 += $(call cc-option, -Wlogical-op) +warning-2 += $(call cc-option, -Wmissing-field-initializers) + +warning-3 := -Wbad-function-cast +warning-3 += -Wcast-qual +warning-3 += -Wconversion +warning-3 += -Wpacked +warning-3 += -Wpadded +warning-3 += -Wpointer-arith +warning-3 += -Wredundant-decls +warning-3 += -Wswitch-default +warning-3 += $(call cc-option, -Wpacked-bitfield-compat) +warning-3 += $(call cc-option, -Wvla) + +warning := $(warning-$(findstring 1, $(KBUILD_ENABLE_EXTRA_GCC_CHECKS))) +warning += $(warning-$(findstring 2, $(KBUILD_ENABLE_EXTRA_GCC_CHECKS))) +warning += $(warning-$(findstring 3, $(KBUILD_ENABLE_EXTRA_GCC_CHECKS))) + +ifeq ("$(strip $(warning))","") + $(error W=$(KBUILD_ENABLE_EXTRA_GCC_CHECKS) is unknown) +endif + +KBUILD_CFLAGS += $(warning) +endif + +include scripts/Makefile.lib + +ifdef host-progs +ifneq ($(hostprogs-y),$(host-progs)) +$(warning kbuild: $(obj)/Makefile - Usage of host-progs is deprecated. Please replace with hostprogs-y!) +hostprogs-y += $(host-progs) +endif +endif + +# Do not include host rules unless needed +ifneq ($(hostprogs-y)$(hostprogs-m),) +include scripts/Makefile.host +endif + +# Uncommented for U-Boot +# We need to create output dicrectory for SPL and TPL even for in-tree build +#ifneq ($(KBUILD_SRC),) +# Create output directory if not already present +_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj)) + +# Create directories for object files if directory does not exist +# Needed when obj-y := dir/file.o syntax is used +_dummy := $(foreach d,$(obj-dirs), $(shell [ -d $(d) ] || mkdir -p $(d))) +#endif + +ifndef obj +$(warning kbuild: Makefile.build is included improperly) +endif + +# =========================================================================== + +ifneq ($(strip $(lib-y) $(lib-m) $(lib-n) $(lib-)),) +lib-target := $(obj)/lib.a +endif + +ifneq ($(strip $(obj-y) $(obj-m) $(obj-n) $(obj-) $(subdir-m) $(lib-target)),) +builtin-target := $(obj)/built-in.o +endif + +modorder-target := $(obj)/modules.order + +# We keep a list of all modules in $(MODVERDIR) + +__build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \ + $(if $(KBUILD_MODULES),$(obj-m) $(modorder-target)) \ + $(subdir-ym) $(always) + @: + +# Linus' kernel sanity checking tool +ifneq ($(KBUILD_CHECKSRC),0) + ifeq ($(KBUILD_CHECKSRC),2) + quiet_cmd_force_checksrc = CHECK $< + cmd_force_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ; + else + quiet_cmd_checksrc = CHECK $< + cmd_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ; + endif +endif + +# Do section mismatch analysis for each module/built-in.o +ifdef CONFIG_DEBUG_SECTION_MISMATCH + cmd_secanalysis = ; scripts/mod/modpost $@ +endif + +# Compile C sources (.c) +# --------------------------------------------------------------------------- + +# Default is built-in, unless we know otherwise +modkern_cflags = \ + $(if $(part-of-module), \ + $(KBUILD_CFLAGS_MODULE) $(CFLAGS_MODULE), \ + $(KBUILD_CFLAGS_KERNEL) $(CFLAGS_KERNEL)) +quiet_modtag := $(empty) $(empty) + +$(real-objs-m) : part-of-module := y +$(real-objs-m:.o=.i) : part-of-module := y +$(real-objs-m:.o=.s) : part-of-module := y +$(real-objs-m:.o=.lst): part-of-module := y + +$(real-objs-m) : quiet_modtag := [M] +$(real-objs-m:.o=.i) : quiet_modtag := [M] +$(real-objs-m:.o=.s) : quiet_modtag := [M] +$(real-objs-m:.o=.lst): quiet_modtag := [M] + +$(obj-m) : quiet_modtag := [M] + +# Default for not multi-part modules +modname = $(basetarget) + +$(multi-objs-m) : modname = $(modname-multi) +$(multi-objs-m:.o=.i) : modname = $(modname-multi) +$(multi-objs-m:.o=.s) : modname = $(modname-multi) +$(multi-objs-m:.o=.lst) : modname = $(modname-multi) +$(multi-objs-y) : modname = $(modname-multi) +$(multi-objs-y:.o=.i) : modname = $(modname-multi) +$(multi-objs-y:.o=.s) : modname = $(modname-multi) +$(multi-objs-y:.o=.lst) : modname = $(modname-multi) + +quiet_cmd_cc_s_c = CC $(quiet_modtag) $@ +cmd_cc_s_c = $(CC) $(c_flags) $(DISABLE_LTO) -fverbose-asm -S -o $@ $< + +$(obj)/%.s: $(src)/%.c FORCE + $(call if_changed_dep,cc_s_c) + +quiet_cmd_cc_i_c = CPP $(quiet_modtag) $@ +cmd_cc_i_c = $(CPP) $(c_flags) -o $@ $< + +$(obj)/%.i: $(src)/%.c FORCE + $(call if_changed_dep,cc_i_c) + +cmd_gensymtypes = \ + $(CPP) -D__GENKSYMS__ $(c_flags) $< | \ + $(GENKSYMS) $(if $(1), -T $(2)) \ + $(patsubst y,-s _,$(CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX)) \ + $(if $(KBUILD_PRESERVE),-p) \ + -r $(firstword $(wildcard $(2:.symtypes=.symref) /dev/null)) + +quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@ +cmd_cc_symtypes_c = \ + set -e; \ + $(call cmd_gensymtypes,true,$@) >/dev/null; \ + test -s $@ || rm -f $@ + +$(obj)/%.symtypes : $(src)/%.c FORCE + $(call cmd,cc_symtypes_c) + +# C (.c) files +# The C file is compiled and updated dependency information is generated. +# (See cmd_cc_o_c + relevant part of rule_cc_o_c) + +quiet_cmd_cc_o_c = CC $(quiet_modtag) $@ + +ifndef CONFIG_MODVERSIONS +cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< + +else +# When module versioning is enabled the following steps are executed: +# o compile a .tmp_<file>.o from <file>.c +# o if .tmp_<file>.o doesn't contain a __ksymtab version, i.e. does +# not export symbols, we just rename .tmp_<file>.o to <file>.o and +# are done. +# o otherwise, we calculate symbol versions using the good old +# genksyms on the preprocessed source and postprocess them in a way +# that they are usable as a linker script +# o generate <file>.o from .tmp_<file>.o using the linker to +# replace the unresolved symbols __crc_exported_symbol with +# the actual value of the checksum generated by genksyms + +cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $< +cmd_modversions = \ + if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then \ + $(call cmd_gensymtypes,$(KBUILD_SYMTYPES),$(@:.o=.symtypes)) \ + > $(@D)/.tmp_$(@F:.o=.ver); \ + \ + $(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) \ + -T $(@D)/.tmp_$(@F:.o=.ver); \ + rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver); \ + else \ + mv -f $(@D)/.tmp_$(@F) $@; \ + fi; +endif + +ifdef CONFIG_FTRACE_MCOUNT_RECORD +ifdef BUILD_C_RECORDMCOUNT +ifeq ("$(origin RECORDMCOUNT_WARN)", "command line") + RECORDMCOUNT_FLAGS = -w +endif +# Due to recursion, we must skip empty.o. +# The empty.o file is created in the make process in order to determine +# the target endianness and word size. It is made before all other C +# files, including recordmcount. +sub_cmd_record_mcount = \ + if [ $(@) != "scripts/mod/empty.o" ]; then \ + $(objtree)/scripts/recordmcount $(RECORDMCOUNT_FLAGS) "$(@)"; \ + fi; +recordmcount_source := $(srctree)/scripts/recordmcount.c \ + $(srctree)/scripts/recordmcount.h +else +sub_cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \ + "$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \ + "$(if $(CONFIG_64BIT),64,32)" \ + "$(OBJDUMP)" "$(OBJCOPY)" "$(CC) $(KBUILD_CFLAGS)" \ + "$(LD)" "$(NM)" "$(RM)" "$(MV)" \ + "$(if $(part-of-module),1,0)" "$(@)"; +recordmcount_source := $(srctree)/scripts/recordmcount.pl +endif +cmd_record_mcount = \ + if [ "$(findstring -pg,$(_c_flags))" = "-pg" ]; then \ + $(sub_cmd_record_mcount) \ + fi; +endif + +define rule_cc_o_c + $(call echo-cmd,checksrc) $(cmd_checksrc) \ + $(call echo-cmd,cc_o_c) $(cmd_cc_o_c); \ + $(cmd_modversions) \ + $(call echo-cmd,record_mcount) \ + $(cmd_record_mcount) \ + scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,cc_o_c)' > \ + $(dot-target).tmp; \ + rm -f $(depfile); \ + mv -f $(dot-target).tmp $(dot-target).cmd +endef + +# Built-in and composite module parts +$(obj)/%.o: $(src)/%.c $(recordmcount_source) FORCE + $(call cmd,force_checksrc) + $(call if_changed_rule,cc_o_c) + +# Single-part modules are special since we need to mark them in $(MODVERDIR) + +$(single-used-m): $(obj)/%.o: $(src)/%.c $(recordmcount_source) FORCE + $(call cmd,force_checksrc) + $(call if_changed_rule,cc_o_c) + @{ echo $(@:.o=.ko); echo $@; } > $(MODVERDIR)/$(@F:.o=.mod) + +quiet_cmd_cc_lst_c = MKLST $@ + cmd_cc_lst_c = $(CC) $(c_flags) -g -c -o $*.o $< && \ + $(CONFIG_SHELL) $(srctree)/scripts/makelst $*.o \ + System.map $(OBJDUMP) > $@ + +$(obj)/%.lst: $(src)/%.c FORCE + $(call if_changed_dep,cc_lst_c) + +# Compile assembler sources (.S) +# --------------------------------------------------------------------------- + +modkern_aflags := $(KBUILD_AFLAGS_KERNEL) $(AFLAGS_KERNEL) + +$(real-objs-m) : modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE) +$(real-objs-m:.o=.s): modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE) + +quiet_cmd_as_s_S = CPP $(quiet_modtag) $@ +cmd_as_s_S = $(CPP) $(a_flags) -o $@ $< + +$(obj)/%.s: $(src)/%.S FORCE + $(call if_changed_dep,as_s_S) + +quiet_cmd_as_o_S = AS $(quiet_modtag) $@ +cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $< + +$(obj)/%.o: $(src)/%.S FORCE + $(call if_changed_dep,as_o_S) + +targets += $(real-objs-y) $(real-objs-m) $(lib-y) +targets += $(extra-y) $(MAKECMDGOALS) $(always) + +# Linker scripts preprocessor (.lds.S -> .lds) +# --------------------------------------------------------------------------- +quiet_cmd_cpp_lds_S = LDS $@ + cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -C -U$(ARCH) \ + -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $< + +$(obj)/%.lds: $(src)/%.lds.S FORCE + $(call if_changed_dep,cpp_lds_S) + +# ASN.1 grammar +# --------------------------------------------------------------------------- +quiet_cmd_asn1_compiler = ASN.1 $@ + cmd_asn1_compiler = $(objtree)/scripts/asn1_compiler $< \ + $(subst .h,.c,$@) $(subst .c,.h,$@) + +.PRECIOUS: $(objtree)/$(obj)/%-asn1.c $(objtree)/$(obj)/%-asn1.h + +$(obj)/%-asn1.c $(obj)/%-asn1.h: $(src)/%.asn1 $(objtree)/scripts/asn1_compiler + $(call cmd,asn1_compiler) + +# Build the compiled-in targets +# --------------------------------------------------------------------------- + +# To build objects in subdirs, we need to descend into the directories +$(sort $(subdir-obj-y)): $(subdir-ym) ; + +# +# Rule to compile a set of .o files into one .o file +# +ifdef builtin-target +quiet_cmd_link_o_target = LD $@ +# If the list of objects to link is empty, just create an empty built-in.o +cmd_link_o_target = $(if $(strip $(obj-y)),\ + $(LD) $(ld_flags) -r -o $@ $(filter $(obj-y), $^) \ + $(cmd_secanalysis),\ + rm -f $@; $(AR) rcs$(KBUILD_ARFLAGS) $@) + +$(builtin-target): $(obj-y) FORCE + $(call if_changed,link_o_target) + +targets += $(builtin-target) +endif # builtin-target + +# +# Rule to create modules.order file +# +# Create commands to either record .ko file or cat modules.order from +# a subdirectory +modorder-cmds = \ + $(foreach m, $(modorder), \ + $(if $(filter %/modules.order, $m), \ + cat $m;, echo kernel/$m;)) + +$(modorder-target): $(subdir-ym) FORCE + $(Q)(cat /dev/null; $(modorder-cmds)) > $@ + +# +# Rule to compile a set of .o files into one .a file +# +ifdef lib-target +quiet_cmd_link_l_target = AR $@ +cmd_link_l_target = rm -f $@; $(AR) rcs$(KBUILD_ARFLAGS) $@ $(lib-y) + +$(lib-target): $(lib-y) FORCE + $(call if_changed,link_l_target) + +targets += $(lib-target) +endif + +# +# Rule to link composite objects +# +# Composite objects are specified in kbuild makefile as follows: +# <composite-object>-objs := <list of .o files> +# or +# <composite-object>-y := <list of .o files> +link_multi_deps = \ +$(filter $(addprefix $(obj)/, \ +$($(subst $(obj)/,,$(@:.o=-objs))) \ +$($(subst $(obj)/,,$(@:.o=-y)))), $^) + +quiet_cmd_link_multi-y = LD $@ +cmd_link_multi-y = $(LD) $(ld_flags) -r -o $@ $(link_multi_deps) $(cmd_secanalysis) + +quiet_cmd_link_multi-m = LD [M] $@ +cmd_link_multi-m = $(cmd_link_multi-y) + +# We would rather have a list of rules like +# foo.o: $(foo-objs) +# but that's not so easy, so we rather make all composite objects depend +# on the set of all their parts +$(multi-used-y) : %.o: $(multi-objs-y) FORCE + $(call if_changed,link_multi-y) + +$(multi-used-m) : %.o: $(multi-objs-m) FORCE + $(call if_changed,link_multi-m) + @{ echo $(@:.o=.ko); echo $(link_multi_deps); } > $(MODVERDIR)/$(@F:.o=.mod) + +targets += $(multi-used-y) $(multi-used-m) + + +# Descending +# --------------------------------------------------------------------------- + +PHONY += $(subdir-ym) +$(subdir-ym): + $(Q)$(MAKE) $(build)=$@ + +# Add FORCE to the prequisites of a target to force it to be always rebuilt. +# --------------------------------------------------------------------------- + +PHONY += FORCE + +FORCE: + +# Read all saved command lines and dependencies for the $(targets) we +# may be building above, using $(if_changed{,_dep}). As an +# optimization, we don't need to read them if the target does not +# exist, we will rebuild anyway in that case. + +targets := $(wildcard $(sort $(targets))) +cmd_files := $(wildcard $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd)) + +ifneq ($(cmd_files),) + include $(cmd_files) +endif + +# Declare the contents of the .PHONY variable as phony. We keep that +# information in a variable se we can use it in if_changed and friends. + +.PHONY: $(PHONY) |
