diff options
Diffstat (limited to 'src/qapi/event.json')
| -rw-r--r-- | src/qapi/event.json | 358 |
1 files changed, 358 insertions, 0 deletions
diff --git a/src/qapi/event.json b/src/qapi/event.json new file mode 100644 index 0000000..f0cef01 --- /dev/null +++ b/src/qapi/event.json @@ -0,0 +1,358 @@ +## +# @SHUTDOWN +# +# Emitted when the virtual machine has shut down, indicating that qemu is +# about to exit. +# +# Note: If the command-line option "-no-shutdown" has been specified, qemu will +# not exit, and a STOP event will eventually follow the SHUTDOWN event +# +# Since: 0.12.0 +## +{ 'event': 'SHUTDOWN' } + +## +# @POWERDOWN +# +# Emitted when the virtual machine is powered down through the power control +# system, such as via ACPI. +# +# Since: 0.12.0 +## +{ 'event': 'POWERDOWN' } + +## +# @RESET +# +# Emitted when the virtual machine is reset +# +# Since: 0.12.0 +## +{ 'event': 'RESET' } + +## +# @STOP +# +# Emitted when the virtual machine is stopped +# +# Since: 0.12.0 +## +{ 'event': 'STOP' } + +## +# @RESUME +# +# Emitted when the virtual machine resumes execution +# +# Since: 0.12.0 +## +{ 'event': 'RESUME' } + +## +# @SUSPEND +# +# Emitted when guest enters a hardware suspension state, for example, S3 state, +# which is sometimes called standby state +# +# Since: 1.1 +## +{ 'event': 'SUSPEND' } + +## +# @SUSPEND_DISK +# +# Emitted when guest enters a hardware suspension state with data saved on +# disk, for example, S4 state, which is sometimes called hibernate state +# +# Note: QEMU shuts down (similar to event @SHUTDOWN) when entering this state +# +# Since: 1.2 +## +{ 'event': 'SUSPEND_DISK' } + +## +# @WAKEUP +# +# Emitted when the guest has woken up from suspend state and is running +# +# Since: 1.1 +## +{ 'event': 'WAKEUP' } + +## +# @RTC_CHANGE +# +# Emitted when the guest changes the RTC time. +# +# @offset: offset between base RTC clock (as specified by -rtc base), and +# new RTC clock value +# +# Since: 0.13.0 +## +{ 'event': 'RTC_CHANGE', + 'data': { 'offset': 'int' } } + +## +# @WATCHDOG +# +# Emitted when the watchdog device's timer is expired +# +# @action: action that has been taken +# +# Note: If action is "reset", "shutdown", or "pause" the WATCHDOG event is +# followed respectively by the RESET, SHUTDOWN, or STOP events +# +# Since: 0.13.0 +## +{ 'event': 'WATCHDOG', + 'data': { 'action': 'WatchdogExpirationAction' } } + +## +# @DEVICE_DELETED +# +# Emitted whenever the device removal completion is acknowledged by the guest. +# At this point, it's safe to reuse the specified device ID. Device removal can +# be initiated by the guest or by HMP/QMP commands. +# +# @device: #optional, device name +# +# @path: device path +# +# Since: 1.5 +## +{ 'event': 'DEVICE_DELETED', + 'data': { '*device': 'str', 'path': 'str' } } + +## +# @NIC_RX_FILTER_CHANGED +# +# Emitted once until the 'query-rx-filter' command is executed, the first event +# will always be emitted +# +# @name: #optional, net client name +# +# @path: device path +# +# Since: 1.6 +## +{ 'event': 'NIC_RX_FILTER_CHANGED', + 'data': { '*name': 'str', 'path': 'str' } } + +## +# @VNC_CONNECTED +# +# Emitted when a VNC client establishes a connection +# +# @server: server information +# +# @client: client information +# +# Note: This event is emitted before any authentication takes place, thus +# the authentication ID is not provided +# +# Since: 0.13.0 +## +{ 'event': 'VNC_CONNECTED', + 'data': { 'server': 'VncServerInfo', + 'client': 'VncBasicInfo' } } + +## +# @VNC_INITIALIZED +# +# Emitted after authentication takes place (if any) and the VNC session is +# made active +# +# @server: server information +# +# @client: client information +# +# Since: 0.13.0 +## +{ 'event': 'VNC_INITIALIZED', + 'data': { 'server': 'VncServerInfo', + 'client': 'VncClientInfo' } } + +## +# @VNC_DISCONNECTED +# +# Emitted when the connection is closed +# +# @server: server information +# +# @client: client information +# +# Since: 0.13.0 +## +{ 'event': 'VNC_DISCONNECTED', + 'data': { 'server': 'VncServerInfo', + 'client': 'VncClientInfo' } } + +## +# @SPICE_CONNECTED +# +# Emitted when a SPICE client establishes a connection +# +# @server: server information +# +# @client: client information +# +# Since: 0.14.0 +## +{ 'event': 'SPICE_CONNECTED', + 'data': { 'server': 'SpiceBasicInfo', + 'client': 'SpiceBasicInfo' } } + +## +# @SPICE_INITIALIZED +# +# Emitted after initial handshake and authentication takes place (if any) +# and the SPICE channel is up and running +# +# @server: server information +# +# @client: client information +# +# Since: 0.14.0 +## +{ 'event': 'SPICE_INITIALIZED', + 'data': { 'server': 'SpiceServerInfo', + 'client': 'SpiceChannel' } } + +## +# @SPICE_DISCONNECTED +# +# Emitted when the SPICE connection is closed +# +# @server: server information +# +# @client: client information +# +# Since: 0.14.0 +## +{ 'event': 'SPICE_DISCONNECTED', + 'data': { 'server': 'SpiceBasicInfo', + 'client': 'SpiceBasicInfo' } } + +## +# @SPICE_MIGRATE_COMPLETED +# +# Emitted when SPICE migration has completed +# +# Since: 1.3 +## +{ 'event': 'SPICE_MIGRATE_COMPLETED' } + +## +# @MIGRATION +# +# Emitted when a migration event happens +# +# @status: @MigrationStatus describing the current migration status. +# +# Since: 2.4 +## +{ 'event': 'MIGRATION', + 'data': {'status': 'MigrationStatus'}} + +## +# @ACPI_DEVICE_OST +# +# Emitted when guest executes ACPI _OST method. +# +# Since: 2.1 +# +# @info: ACPIOSTInfo type as described in qapi-schema.json +## +{ 'event': 'ACPI_DEVICE_OST', + 'data': { 'info': 'ACPIOSTInfo' } } + +## +# @BALLOON_CHANGE +# +# Emitted when the guest changes the actual BALLOON level. This value is +# equivalent to the @actual field return by the 'query-balloon' command +# +# @actual: actual level of the guest memory balloon in bytes +# +# Since: 1.2 +## +{ 'event': 'BALLOON_CHANGE', + 'data': { 'actual': 'int' } } + +## +# @GUEST_PANICKED +# +# Emitted when guest OS panic is detected +# +# @action: action that has been taken, currently always "pause" +# +# Since: 1.5 +## +{ 'event': 'GUEST_PANICKED', + 'data': { 'action': 'GuestPanicAction' } } + +## +# @QUORUM_FAILURE +# +# Emitted by the Quorum block driver if it fails to establish a quorum +# +# @reference: device name if defined else node name +# +# @sector-num: number of the first sector of the failed read operation +# +# @sectors-count: failed read operation sector count +# +# Since: 2.0 +## +{ 'event': 'QUORUM_FAILURE', + 'data': { 'reference': 'str', 'sector-num': 'int', 'sectors-count': 'int' } } + +## +# @QUORUM_REPORT_BAD +# +# Emitted to report a corruption of a Quorum file +# +# @error: #optional, error message. Only present on failure. This field +# contains a human-readable error message. There are no semantics other +# than that the block layer reported an error and clients should not +# try to interpret the error string. +# +# @node-name: the graph node name of the block driver state +# +# @sector-num: number of the first sector of the failed read operation +# +# @sectors-count: failed read operation sector count +# +# Since: 2.0 +## +{ 'event': 'QUORUM_REPORT_BAD', + 'data': { '*error': 'str', 'node-name': 'str', + 'sector-num': 'int', 'sectors-count': 'int' } } + +## +# @VSERPORT_CHANGE +# +# Emitted when the guest opens or closes a virtio-serial port. +# +# @id: device identifier of the virtio-serial port +# +# @open: true if the guest has opened the virtio-serial port +# +# Since: 2.1 +## +{ 'event': 'VSERPORT_CHANGE', + 'data': { 'id': 'str', 'open': 'bool' } } + +## +# @MEM_UNPLUG_ERROR +# +# Emitted when memory hot unplug error occurs. +# +# @device: device name +# +# @msg: Informative message +# +# Since: 2.4 +## +{ 'event': 'MEM_UNPLUG_ERROR', + 'data': { 'device': 'str', 'msg': 'str' } } |
