summaryrefslogtreecommitdiffstats
path: root/src/hw/watchdog/wdt_i6300esb.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/hw/watchdog/wdt_i6300esb.c')
-rw-r--r--src/hw/watchdog/wdt_i6300esb.c465
1 files changed, 465 insertions, 0 deletions
diff --git a/src/hw/watchdog/wdt_i6300esb.c b/src/hw/watchdog/wdt_i6300esb.c
new file mode 100644
index 0000000..a91c8fd
--- /dev/null
+++ b/src/hw/watchdog/wdt_i6300esb.c
@@ -0,0 +1,465 @@
+/*
+ * Virtual hardware watchdog.
+ *
+ * Copyright (C) 2009 Red Hat Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * By Richard W.M. Jones (rjones@redhat.com).
+ */
+
+#include <inttypes.h>
+
+#include "qemu-common.h"
+#include "qemu/timer.h"
+#include "sysemu/watchdog.h"
+#include "hw/hw.h"
+#include "hw/pci/pci.h"
+
+/*#define I6300ESB_DEBUG 1*/
+
+#ifdef I6300ESB_DEBUG
+#define i6300esb_debug(fs,...) \
+ fprintf(stderr,"i6300esb: %s: "fs,__func__,##__VA_ARGS__)
+#else
+#define i6300esb_debug(fs,...)
+#endif
+
+/* PCI configuration registers */
+#define ESB_CONFIG_REG 0x60 /* Config register */
+#define ESB_LOCK_REG 0x68 /* WDT lock register */
+
+/* Memory mapped registers (offset from base address) */
+#define ESB_TIMER1_REG 0x00 /* Timer1 value after each reset */
+#define ESB_TIMER2_REG 0x04 /* Timer2 value after each reset */
+#define ESB_GINTSR_REG 0x08 /* General Interrupt Status Register */
+#define ESB_RELOAD_REG 0x0c /* Reload register */
+
+/* Lock register bits */
+#define ESB_WDT_FUNC (0x01 << 2) /* Watchdog functionality */
+#define ESB_WDT_ENABLE (0x01 << 1) /* Enable WDT */
+#define ESB_WDT_LOCK (0x01 << 0) /* Lock (nowayout) */
+
+/* Config register bits */
+#define ESB_WDT_REBOOT (0x01 << 5) /* Enable reboot on timeout */
+#define ESB_WDT_FREQ (0x01 << 2) /* Decrement frequency */
+#define ESB_WDT_INTTYPE (0x11 << 0) /* Interrupt type on timer1 timeout */
+
+/* Reload register bits */
+#define ESB_WDT_RELOAD (0x01 << 8) /* prevent timeout */
+
+/* Magic constants */
+#define ESB_UNLOCK1 0x80 /* Step 1 to unlock reset registers */
+#define ESB_UNLOCK2 0x86 /* Step 2 to unlock reset registers */
+
+/* Device state. */
+struct I6300State {
+ PCIDevice dev;
+ MemoryRegion io_mem;
+
+ int reboot_enabled; /* "Reboot" on timer expiry. The real action
+ * performed depends on the -watchdog-action
+ * param passed on QEMU command line.
+ */
+ int clock_scale; /* Clock scale. */
+#define CLOCK_SCALE_1KHZ 0
+#define CLOCK_SCALE_1MHZ 1
+
+ int int_type; /* Interrupt type generated. */
+#define INT_TYPE_IRQ 0 /* APIC 1, INT 10 */
+#define INT_TYPE_SMI 2
+#define INT_TYPE_DISABLED 3
+
+ int free_run; /* If true, reload timer on expiry. */
+ int locked; /* If true, enabled field cannot be changed. */
+ int enabled; /* If true, watchdog is enabled. */
+
+ QEMUTimer *timer; /* The actual watchdog timer. */
+
+ uint32_t timer1_preload; /* Values preloaded into timer1, timer2. */
+ uint32_t timer2_preload;
+ int stage; /* Stage (1 or 2). */
+
+ int unlock_state; /* Guest writes 0x80, 0x86 to unlock the
+ * registers, and we transition through
+ * states 0 -> 1 -> 2 when this happens.
+ */
+
+ int previous_reboot_flag; /* If the watchdog caused the previous
+ * reboot, this flag will be set.
+ */
+};
+
+typedef struct I6300State I6300State;
+
+#define TYPE_WATCHDOG_I6300ESB_DEVICE "i6300esb"
+#define WATCHDOG_I6300ESB_DEVICE(obj) \
+ OBJECT_CHECK(I6300State, (obj), TYPE_WATCHDOG_I6300ESB_DEVICE)
+
+/* This function is called when the watchdog has either been enabled
+ * (hence it starts counting down) or has been keep-alived.
+ */
+static void i6300esb_restart_timer(I6300State *d, int stage)
+{
+ int64_t timeout;
+
+ if (!d->enabled)
+ return;
+
+ d->stage = stage;
+
+ if (d->stage <= 1)
+ timeout = d->timer1_preload;
+ else
+ timeout = d->timer2_preload;
+
+ if (d->clock_scale == CLOCK_SCALE_1KHZ)
+ timeout <<= 15;
+ else
+ timeout <<= 5;
+
+ /* Get the timeout in nanoseconds. */
+
+ timeout = timeout * 30; /* on a PCI bus, 1 tick is 30 ns*/
+
+ i6300esb_debug("stage %d, timeout %" PRIi64 "\n", d->stage, timeout);
+
+ timer_mod(d->timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + timeout);
+}
+
+/* This is called when the guest disables the watchdog. */
+static void i6300esb_disable_timer(I6300State *d)
+{
+ i6300esb_debug("timer disabled\n");
+
+ timer_del(d->timer);
+}
+
+static void i6300esb_reset(DeviceState *dev)
+{
+ PCIDevice *pdev = PCI_DEVICE(dev);
+ I6300State *d = WATCHDOG_I6300ESB_DEVICE(pdev);
+
+ i6300esb_debug("I6300State = %p\n", d);
+
+ i6300esb_disable_timer(d);
+
+ /* NB: Don't change d->previous_reboot_flag in this function. */
+
+ d->reboot_enabled = 1;
+ d->clock_scale = CLOCK_SCALE_1KHZ;
+ d->int_type = INT_TYPE_IRQ;
+ d->free_run = 0;
+ d->locked = 0;
+ d->enabled = 0;
+ d->timer1_preload = 0xfffff;
+ d->timer2_preload = 0xfffff;
+ d->stage = 1;
+ d->unlock_state = 0;
+}
+
+/* This function is called when the watchdog expires. Note that
+ * the hardware has two timers, and so expiry happens in two stages.
+ * If d->stage == 1 then we perform the first stage action (usually,
+ * sending an interrupt) and then restart the timer again for the
+ * second stage. If the second stage expires then the watchdog
+ * really has run out.
+ */
+static void i6300esb_timer_expired(void *vp)
+{
+ I6300State *d = vp;
+
+ i6300esb_debug("stage %d\n", d->stage);
+
+ if (d->stage == 1) {
+ /* What to do at the end of stage 1? */
+ switch (d->int_type) {
+ case INT_TYPE_IRQ:
+ fprintf(stderr, "i6300esb_timer_expired: I would send APIC 1 INT 10 here if I knew how (XXX)\n");
+ break;
+ case INT_TYPE_SMI:
+ fprintf(stderr, "i6300esb_timer_expired: I would send SMI here if I knew how (XXX)\n");
+ break;
+ }
+
+ /* Start the second stage. */
+ i6300esb_restart_timer(d, 2);
+ } else {
+ /* Second stage expired, reboot for real. */
+ if (d->reboot_enabled) {
+ d->previous_reboot_flag = 1;
+ watchdog_perform_action(); /* This reboots, exits, etc */
+ i6300esb_reset(&d->dev.qdev);
+ }
+
+ /* In "free running mode" we start stage 1 again. */
+ if (d->free_run)
+ i6300esb_restart_timer(d, 1);
+ }
+}
+
+static void i6300esb_config_write(PCIDevice *dev, uint32_t addr,
+ uint32_t data, int len)
+{
+ I6300State *d = WATCHDOG_I6300ESB_DEVICE(dev);
+ int old;
+
+ i6300esb_debug("addr = %x, data = %x, len = %d\n", addr, data, len);
+
+ if (addr == ESB_CONFIG_REG && len == 2) {
+ d->reboot_enabled = (data & ESB_WDT_REBOOT) == 0;
+ d->clock_scale =
+ (data & ESB_WDT_FREQ) != 0 ? CLOCK_SCALE_1MHZ : CLOCK_SCALE_1KHZ;
+ d->int_type = (data & ESB_WDT_INTTYPE);
+ } else if (addr == ESB_LOCK_REG && len == 1) {
+ if (!d->locked) {
+ d->locked = (data & ESB_WDT_LOCK) != 0;
+ d->free_run = (data & ESB_WDT_FUNC) != 0;
+ old = d->enabled;
+ d->enabled = (data & ESB_WDT_ENABLE) != 0;
+ if (!old && d->enabled) /* Enabled transitioned from 0 -> 1 */
+ i6300esb_restart_timer(d, 1);
+ else if (!d->enabled)
+ i6300esb_disable_timer(d);
+ }
+ } else {
+ pci_default_write_config(dev, addr, data, len);
+ }
+}
+
+static uint32_t i6300esb_config_read(PCIDevice *dev, uint32_t addr, int len)
+{
+ I6300State *d = WATCHDOG_I6300ESB_DEVICE(dev);
+ uint32_t data;
+
+ i6300esb_debug ("addr = %x, len = %d\n", addr, len);
+
+ if (addr == ESB_CONFIG_REG && len == 2) {
+ data =
+ (d->reboot_enabled ? 0 : ESB_WDT_REBOOT) |
+ (d->clock_scale == CLOCK_SCALE_1MHZ ? ESB_WDT_FREQ : 0) |
+ d->int_type;
+ return data;
+ } else if (addr == ESB_LOCK_REG && len == 1) {
+ data =
+ (d->free_run ? ESB_WDT_FUNC : 0) |
+ (d->locked ? ESB_WDT_LOCK : 0) |
+ (d->enabled ? ESB_WDT_ENABLE : 0);
+ return data;
+ } else {
+ return pci_default_read_config(dev, addr, len);
+ }
+}
+
+static uint32_t i6300esb_mem_readb(void *vp, hwaddr addr)
+{
+ i6300esb_debug ("addr = %x\n", (int) addr);
+
+ return 0;
+}
+
+static uint32_t i6300esb_mem_readw(void *vp, hwaddr addr)
+{
+ uint32_t data = 0;
+ I6300State *d = vp;
+
+ i6300esb_debug("addr = %x\n", (int) addr);
+
+ if (addr == 0xc) {
+ /* The previous reboot flag is really bit 9, but there is
+ * a bug in the Linux driver where it thinks it's bit 12.
+ * Set both.
+ */
+ data = d->previous_reboot_flag ? 0x1200 : 0;
+ }
+
+ return data;
+}
+
+static uint32_t i6300esb_mem_readl(void *vp, hwaddr addr)
+{
+ i6300esb_debug("addr = %x\n", (int) addr);
+
+ return 0;
+}
+
+static void i6300esb_mem_writeb(void *vp, hwaddr addr, uint32_t val)
+{
+ I6300State *d = vp;
+
+ i6300esb_debug("addr = %x, val = %x\n", (int) addr, val);
+
+ if (addr == 0xc && val == 0x80)
+ d->unlock_state = 1;
+ else if (addr == 0xc && val == 0x86 && d->unlock_state == 1)
+ d->unlock_state = 2;
+}
+
+static void i6300esb_mem_writew(void *vp, hwaddr addr, uint32_t val)
+{
+ I6300State *d = vp;
+
+ i6300esb_debug("addr = %x, val = %x\n", (int) addr, val);
+
+ if (addr == 0xc && val == 0x80)
+ d->unlock_state = 1;
+ else if (addr == 0xc && val == 0x86 && d->unlock_state == 1)
+ d->unlock_state = 2;
+ else {
+ if (d->unlock_state == 2) {
+ if (addr == 0xc) {
+ if ((val & 0x100) != 0)
+ /* This is the "ping" from the userspace watchdog in
+ * the guest ...
+ */
+ i6300esb_restart_timer(d, 1);
+
+ /* Setting bit 9 resets the previous reboot flag.
+ * There's a bug in the Linux driver where it sets
+ * bit 12 instead.
+ */
+ if ((val & 0x200) != 0 || (val & 0x1000) != 0) {
+ d->previous_reboot_flag = 0;
+ }
+ }
+
+ d->unlock_state = 0;
+ }
+ }
+}
+
+static void i6300esb_mem_writel(void *vp, hwaddr addr, uint32_t val)
+{
+ I6300State *d = vp;
+
+ i6300esb_debug ("addr = %x, val = %x\n", (int) addr, val);
+
+ if (addr == 0xc && val == 0x80)
+ d->unlock_state = 1;
+ else if (addr == 0xc && val == 0x86 && d->unlock_state == 1)
+ d->unlock_state = 2;
+ else {
+ if (d->unlock_state == 2) {
+ if (addr == 0)
+ d->timer1_preload = val & 0xfffff;
+ else if (addr == 4)
+ d->timer2_preload = val & 0xfffff;
+
+ d->unlock_state = 0;
+ }
+ }
+}
+
+static const MemoryRegionOps i6300esb_ops = {
+ .old_mmio = {
+ .read = {
+ i6300esb_mem_readb,
+ i6300esb_mem_readw,
+ i6300esb_mem_readl,
+ },
+ .write = {
+ i6300esb_mem_writeb,
+ i6300esb_mem_writew,
+ i6300esb_mem_writel,
+ },
+ },
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static const VMStateDescription vmstate_i6300esb = {
+ .name = "i6300esb_wdt",
+ /* With this VMSD's introduction, version_id/minimum_version_id were
+ * erroneously set to sizeof(I6300State), causing a somewhat random
+ * version_id to be set for every build. This eventually broke
+ * migration.
+ *
+ * To correct this without breaking old->new migration for older
+ * versions of QEMU, we've set version_id to a value high enough
+ * to exceed all past values of sizeof(I6300State) across various
+ * build environments, and have reset minimum_version_id to 1,
+ * since this VMSD has never changed and thus can accept all past
+ * versions.
+ *
+ * For future changes we can treat these values as we normally would.
+ */
+ .version_id = 10000,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_PCI_DEVICE(dev, I6300State),
+ VMSTATE_INT32(reboot_enabled, I6300State),
+ VMSTATE_INT32(clock_scale, I6300State),
+ VMSTATE_INT32(int_type, I6300State),
+ VMSTATE_INT32(free_run, I6300State),
+ VMSTATE_INT32(locked, I6300State),
+ VMSTATE_INT32(enabled, I6300State),
+ VMSTATE_TIMER_PTR(timer, I6300State),
+ VMSTATE_UINT32(timer1_preload, I6300State),
+ VMSTATE_UINT32(timer2_preload, I6300State),
+ VMSTATE_INT32(stage, I6300State),
+ VMSTATE_INT32(unlock_state, I6300State),
+ VMSTATE_INT32(previous_reboot_flag, I6300State),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void i6300esb_realize(PCIDevice *dev, Error **errp)
+{
+ I6300State *d = WATCHDOG_I6300ESB_DEVICE(dev);
+
+ i6300esb_debug("I6300State = %p\n", d);
+
+ d->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, i6300esb_timer_expired, d);
+ d->previous_reboot_flag = 0;
+
+ memory_region_init_io(&d->io_mem, OBJECT(d), &i6300esb_ops, d,
+ "i6300esb", 0x10);
+ pci_register_bar(&d->dev, 0, 0, &d->io_mem);
+ /* qemu_register_coalesced_mmio (addr, 0x10); ? */
+}
+
+static WatchdogTimerModel model = {
+ .wdt_name = "i6300esb",
+ .wdt_description = "Intel 6300ESB",
+};
+
+static void i6300esb_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+
+ k->config_read = i6300esb_config_read;
+ k->config_write = i6300esb_config_write;
+ k->realize = i6300esb_realize;
+ k->vendor_id = PCI_VENDOR_ID_INTEL;
+ k->device_id = PCI_DEVICE_ID_INTEL_ESB_9;
+ k->class_id = PCI_CLASS_SYSTEM_OTHER;
+ dc->reset = i6300esb_reset;
+ dc->vmsd = &vmstate_i6300esb;
+ set_bit(DEVICE_CATEGORY_MISC, dc->categories);
+}
+
+static const TypeInfo i6300esb_info = {
+ .name = TYPE_WATCHDOG_I6300ESB_DEVICE,
+ .parent = TYPE_PCI_DEVICE,
+ .instance_size = sizeof(I6300State),
+ .class_init = i6300esb_class_init,
+};
+
+static void i6300esb_register_types(void)
+{
+ watchdog_add_model(&model);
+ type_register_static(&i6300esb_info);
+}
+
+type_init(i6300esb_register_types)
OpenPOWER on IntegriCloud