diff options
Diffstat (limited to 'include/qemu/timer.h')
| -rw-r--r-- | include/qemu/timer.h | 310 |
1 files changed, 310 insertions, 0 deletions
diff --git a/include/qemu/timer.h b/include/qemu/timer.h new file mode 100644 index 0000000..1766b2d --- /dev/null +++ b/include/qemu/timer.h @@ -0,0 +1,310 @@ +#ifndef QEMU_TIMER_H +#define QEMU_TIMER_H + +#include "qemu-common.h" +#include "qemu/main-loop.h" +#include "qemu/notify.h" + +#ifdef __FreeBSD__ +#include <sys/param.h> +#endif + +/* timers */ + +#define SCALE_MS 1000000 +#define SCALE_US 1000 +#define SCALE_NS 1 + +typedef struct QEMUClock QEMUClock; +typedef void QEMUTimerCB(void *opaque); + +/* The real time clock should be used only for stuff which does not + change the virtual machine state, as it is run even if the virtual + machine is stopped. The real time clock has a frequency of 1000 + Hz. */ +extern QEMUClock *rt_clock; + +/* The virtual clock is only run during the emulation. It is stopped + when the virtual machine is stopped. Virtual timers use a high + precision clock, usually cpu cycles (use ticks_per_sec). */ +extern QEMUClock *vm_clock; + +/* The host clock should be use for device models that emulate accurate + real time sources. It will continue to run when the virtual machine + is suspended, and it will reflect system time changes the host may + undergo (e.g. due to NTP). The host clock has the same precision as + the virtual clock. */ +extern QEMUClock *host_clock; + +int64_t qemu_get_clock_ns(QEMUClock *clock); +int64_t qemu_clock_has_timers(QEMUClock *clock); +int64_t qemu_clock_expired(QEMUClock *clock); +int64_t qemu_clock_deadline(QEMUClock *clock); +void qemu_clock_enable(QEMUClock *clock, bool enabled); +void qemu_clock_warp(QEMUClock *clock); + +void qemu_register_clock_reset_notifier(QEMUClock *clock, Notifier *notifier); +void qemu_unregister_clock_reset_notifier(QEMUClock *clock, + Notifier *notifier); + +QEMUTimer *qemu_new_timer(QEMUClock *clock, int scale, + QEMUTimerCB *cb, void *opaque); +void qemu_free_timer(QEMUTimer *ts); +void qemu_del_timer(QEMUTimer *ts); +void qemu_mod_timer_ns(QEMUTimer *ts, int64_t expire_time); +void qemu_mod_timer(QEMUTimer *ts, int64_t expire_time); +bool qemu_timer_pending(QEMUTimer *ts); +bool qemu_timer_expired(QEMUTimer *timer_head, int64_t current_time); +uint64_t qemu_timer_expire_time_ns(QEMUTimer *ts); + +void qemu_run_timers(QEMUClock *clock); +void qemu_run_all_timers(void); +void configure_alarms(char const *opt); +void init_clocks(void); +int init_timer_alarm(void); + +int64_t cpu_get_ticks(void); +void cpu_enable_ticks(void); +void cpu_disable_ticks(void); + +static inline QEMUTimer *qemu_new_timer_ns(QEMUClock *clock, QEMUTimerCB *cb, + void *opaque) +{ + return qemu_new_timer(clock, SCALE_NS, cb, opaque); +} + +static inline QEMUTimer *qemu_new_timer_ms(QEMUClock *clock, QEMUTimerCB *cb, + void *opaque) +{ + return qemu_new_timer(clock, SCALE_MS, cb, opaque); +} + +static inline int64_t qemu_get_clock_ms(QEMUClock *clock) +{ + return qemu_get_clock_ns(clock) / SCALE_MS; +} + +static inline int64_t get_ticks_per_sec(void) +{ + return 1000000000LL; +} + +/* real time host monotonic timer */ +static inline int64_t get_clock_realtime(void) +{ + struct timeval tv; + + gettimeofday(&tv, NULL); + return tv.tv_sec * 1000000000LL + (tv.tv_usec * 1000); +} + +/* Warning: don't insert tracepoints into these functions, they are + also used by simpletrace backend and tracepoints would cause + an infinite recursion! */ +#ifdef _WIN32 +extern int64_t clock_freq; + +static inline int64_t get_clock(void) +{ + LARGE_INTEGER ti; + QueryPerformanceCounter(&ti); + return muldiv64(ti.QuadPart, get_ticks_per_sec(), clock_freq); +} + +#else + +extern int use_rt_clock; + +static inline int64_t get_clock(void) +{ +#if defined(__linux__) || (defined(__FreeBSD__) && __FreeBSD_version >= 500000) \ + || defined(__DragonFly__) || defined(__FreeBSD_kernel__) + if (use_rt_clock) { + struct timespec ts; + clock_gettime(CLOCK_MONOTONIC, &ts); + return ts.tv_sec * 1000000000LL + ts.tv_nsec; + } else +#endif + { + /* XXX: using gettimeofday leads to problems if the date + changes, so it should be avoided. */ + return get_clock_realtime(); + } +} +#endif + +void qemu_get_timer(QEMUFile *f, QEMUTimer *ts); +void qemu_put_timer(QEMUFile *f, QEMUTimer *ts); + +/* icount */ +int64_t cpu_get_icount(void); +int64_t cpu_get_clock(void); + +/*******************************************/ +/* host CPU ticks (if available) */ + +#if defined(_ARCH_PPC) + +static inline int64_t cpu_get_real_ticks(void) +{ + int64_t retval; +#ifdef _ARCH_PPC64 + /* This reads timebase in one 64bit go and includes Cell workaround from: + http://ozlabs.org/pipermail/linuxppc-dev/2006-October/027052.html + */ + __asm__ __volatile__ ("mftb %0\n\t" + "cmpwi %0,0\n\t" + "beq- $-8" + : "=r" (retval)); +#else + /* http://ozlabs.org/pipermail/linuxppc-dev/1999-October/003889.html */ + unsigned long junk; + __asm__ __volatile__ ("mfspr %1,269\n\t" /* mftbu */ + "mfspr %L0,268\n\t" /* mftb */ + "mfspr %0,269\n\t" /* mftbu */ + "cmpw %0,%1\n\t" + "bne $-16" + : "=r" (retval), "=r" (junk)); +#endif + return retval; +} + +#elif defined(__i386__) + +static inline int64_t cpu_get_real_ticks(void) +{ + int64_t val; + asm volatile ("rdtsc" : "=A" (val)); + return val; +} + +#elif defined(__x86_64__) + +static inline int64_t cpu_get_real_ticks(void) +{ + uint32_t low,high; + int64_t val; + asm volatile("rdtsc" : "=a" (low), "=d" (high)); + val = high; + val <<= 32; + val |= low; + return val; +} + +#elif defined(__hppa__) + +static inline int64_t cpu_get_real_ticks(void) +{ + int val; + asm volatile ("mfctl %%cr16, %0" : "=r"(val)); + return val; +} + +#elif defined(__ia64) + +static inline int64_t cpu_get_real_ticks(void) +{ + int64_t val; + asm volatile ("mov %0 = ar.itc" : "=r"(val) :: "memory"); + return val; +} + +#elif defined(__s390__) + +static inline int64_t cpu_get_real_ticks(void) +{ + int64_t val; + asm volatile("stck 0(%1)" : "=m" (val) : "a" (&val) : "cc"); + return val; +} + +#elif defined(__sparc__) + +static inline int64_t cpu_get_real_ticks (void) +{ +#if defined(_LP64) + uint64_t rval; + asm volatile("rd %%tick,%0" : "=r"(rval)); + return rval; +#else + /* We need an %o or %g register for this. For recent enough gcc + there is an "h" constraint for that. Don't bother with that. */ + union { + uint64_t i64; + struct { + uint32_t high; + uint32_t low; + } i32; + } rval; + asm volatile("rd %%tick,%%g1; srlx %%g1,32,%0; mov %%g1,%1" + : "=r"(rval.i32.high), "=r"(rval.i32.low) : : "g1"); + return rval.i64; +#endif +} + +#elif defined(__mips__) && \ + ((defined(__mips_isa_rev) && __mips_isa_rev >= 2) || defined(__linux__)) +/* + * binutils wants to use rdhwr only on mips32r2 + * but as linux kernel emulate it, it's fine + * to use it. + * + */ +#define MIPS_RDHWR(rd, value) { \ + __asm__ __volatile__ (".set push\n\t" \ + ".set mips32r2\n\t" \ + "rdhwr %0, "rd"\n\t" \ + ".set pop" \ + : "=r" (value)); \ + } + +static inline int64_t cpu_get_real_ticks(void) +{ + /* On kernels >= 2.6.25 rdhwr <reg>, $2 and $3 are emulated */ + uint32_t count; + static uint32_t cyc_per_count = 0; + + if (!cyc_per_count) { + MIPS_RDHWR("$3", cyc_per_count); + } + + MIPS_RDHWR("$2", count); + return (int64_t)(count * cyc_per_count); +} + +#elif defined(__alpha__) + +static inline int64_t cpu_get_real_ticks(void) +{ + uint64_t cc; + uint32_t cur, ofs; + + asm volatile("rpcc %0" : "=r"(cc)); + cur = cc; + ofs = cc >> 32; + return cur - ofs; +} + +#else +/* The host CPU doesn't have an easily accessible cycle counter. + Just return a monotonically increasing value. This will be + totally wrong, but hopefully better than nothing. */ +static inline int64_t cpu_get_real_ticks (void) +{ + static int64_t ticks = 0; + return ticks++; +} +#endif + +#ifdef CONFIG_PROFILER +static inline int64_t profile_getclock(void) +{ + return cpu_get_real_ticks(); +} + +extern int64_t qemu_time, qemu_time_start; +extern int64_t tlb_flush_time; +extern int64_t dev_time; +#endif + +#endif |
