summaryrefslogtreecommitdiffstats
path: root/jedec.c
Commit message (Expand)AuthorAgeFilesLines
* Add a bunch of new/tested stuff and various small changes 18Stefan Tauner2013-07-251-2/+2
* Use uintptr_t for chipaddr instead of unsigned longStefan Tauner2013-07-131-3/+2
* Do not read the flash chip twice in verification modeStefan Tauner2012-10-271-1/+1
* Make struct flashchip a field in struct flashctx instead of a complete copyCarl-Daniel Hailfinger2012-08-251-22/+23
* Add struct flashctx * parameter to all functions accessing flash chipsCarl-Daniel Hailfinger2011-12-181-64/+72
* Use struct flashctx instead of struct flashchip for flash chip accessCarl-Daniel Hailfinger2011-12-141-16/+16
* Unsignify lengths and addresses in chip functions and structsStefan Tauner2011-11-231-13/+13
* Revert "Unsignify lengths and addresses in chip functions and structs"Stefan Tauner2011-09-181-3/+3
* Unsignify lengths and addresses in chip functions and structsStefan Tauner2011-09-181-3/+3
* Remove unneeded inclusions of chipdrivers.hStefan Tauner2011-08-161-1/+0
* Erase functions are no longer called from chip drivers and thus their interna...Carl-Daniel Hailfinger2011-06-261-13/+3
* Remove delays in JEDEC erase sequenceMichael Karcher2011-04-151-18/+27
* Add a reset to probe_jedec before we read the Chip's IDsSean Nelson2010-10-201-1/+21
* Switch all flash chips to partial writeCarl-Daniel Hailfinger2010-10-131-14/+4
* Refactor remaining write wrappersCarl-Daniel Hailfinger2010-10-131-35/+66
* Simplify calls to inner write functionsCarl-Daniel Hailfinger2010-10-101-6/+1
* The currently used write functions (wrappers) all use helpers which perform t...Carl-Daniel Hailfinger2010-10-101-10/+6
* Remove progress printing from individual flash chip driversCarl-Daniel Hailfinger2010-10-081-12/+0
* Flashrom had an implicit erase-on-write for most flash chip and programmer dr...Carl-Daniel Hailfinger2010-10-081-11/+0
* Kill global variables, constants and functions if local scope sufficesCarl-Daniel Hailfinger2010-07-031-10/+10
* Polish the flashrom code comments and outputs a bitUwe Hermann2010-03-251-1/+1
* Convert chips' message printing to msg_c* Fixed suggestions by Carl-DanielSean Nelson2010-03-241-27/+27
* Split spi.c into programmer and chip code Remove chipdriver.h include from fl...Sean Nelson2010-02-261-0/+1
* Complete the addition of Feature Bits for all Jedec based chipsSean Nelson2010-01-281-10/+34
* Use address mask in probe_jedecCarl-Daniel Hailfinger2010-01-091-1/+17
* Use the register mapping feature bitCarl-Daniel Hailfinger2010-01-091-3/+3
* The patch converts jedec functions into mask-based generics which can be used...Sean Nelson2010-01-041-93/+128
* Convert the following chips to use struct eraseblockSean Nelson2009-12-221-0/+11
* If the JEDEC Toggle Bit algorithm needs more than 2^20 loops, it is a good si...Carl-Daniel Hailfinger2009-12-171-4/+27
* Probe_jedec() checks the delay value and issues programmer_delay based on the...Sean Nelson2009-12-171-6/+12
* Use common jedec functionality where appropriateMichael Karcher2009-11-271-0/+27
* This patch removes the extremely dangerous unprotect_jedec function which is ...Michael Karcher2009-11-261-23/+3
* Jedec.c was missing error handling in a few casesCarl-Daniel Hailfinger2009-11-251-17/+23
* The automatic retry in write_page_write_jedec didn't retry flashing the corre...Carl-Daniel Hailfinger2009-11-141-3/+3
* Remove confusing out-of-date commentCarl-Daniel Hailfinger2009-10-191-3/+0
* Switch SST49LF004A/B to block erase, remove the hack which simulated (unsuppo...Carl-Daniel Hailfinger2009-09-231-2/+2
* Standardize on using __func__ instead of __FUNCTION__Uwe Hermann2009-09-021-1/+1
* Verbose probe output is split across multiple lines for some probe functionsCarl-Daniel Hailfinger2009-07-231-1/+1
* Change chip_readb in loop to use verify_range in write_page_write_jedec (jede...Urja Rannikko2009-06-251-14/+8
* Flashrom only checks for very few chips if the erase workedCarl-Daniel Hailfinger2009-06-151-10/+23
* Add external programmer delay functions so external programmers can handle th...Carl-Daniel Hailfinger2009-06-051-26/+26
* Add probe_timing information (int uS value)Maciej Pijanka2009-06-031-2/+18
* Drop unused/duplicated #includes and some dead codeUwe Hermann2009-05-161-2/+0
* Use chipaddr instead of volatile uint8_t * because when we access chips in ex...Carl-Daniel Hailfinger2009-05-161-19/+19
* Use helper functions chip_{read,write}[bwl] to access flash chipsCarl-Daniel Hailfinger2009-05-121-2/+2
* When flashrom JEDEC code sends the ID command to the chip, it expects to see ...Carl-Daniel Hailfinger2009-05-111-0/+21
* FreeBSD definitions of (read|write)[bwl] collide with our ownCarl-Daniel Hailfinger2009-03-061-50/+50
* Use helper functions to access flash chipsCarl-Daniel Hailfinger2009-03-051-50/+50
* Beautify flash chip ID verbose printout a little, always use %02xPeter Stuge2009-01-251-1/+1
* Increase delay in probe_jedec() after Product ID Entry to 10msPeter Stuge2008-06-241-3/+2
OpenPOWER on IntegriCloud