diff options
Diffstat (limited to 'flashrom.8.tmpl')
| -rw-r--r-- | flashrom.8.tmpl | 17 |
1 files changed, 13 insertions, 4 deletions
diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl index 517c00e..5b6e63c 100644 --- a/flashrom.8.tmpl +++ b/flashrom.8.tmpl @@ -233,6 +233,8 @@ cards)" .sp .BR "* atavia" " (for flash ROMs on VIA VT6421A SATA controllers)" .sp +.BR "* atapromise" " (for flash ROMs on Promise PDC2026x ATA/RAID controllers)" +.sp .BR "* it8212" " (for flash ROMs on ITE IT8212F ATA/RAID controller)" .sp .BR "* ft2232_spi" " (for SPI flash ROMs attached to an FT2232/FT4232H/FT232H family \ @@ -636,7 +638,7 @@ is an 8-bit hexadecimal value. .SS .BR "nic3com" , " nicrealtek" , " nicnatsemi" , " nicintel", " nicintel_eeprom"\ , " nicintel_spi" , " gfxnvidia" , " ogp_spi" , " drkaiser" , " satasii"\ -, " satamv" , " atahpt", " atavia " and " it8212 " programmers +, " satamv" , " atahpt", " atavia ", " atapromise " and " it8212 " programmers .IP These programmers have an option to specify the PCI address of the card your want to use, which must be specified if more than one card supported @@ -669,6 +671,13 @@ will be interpreted as usual (leading 0x (0) for hexadecimal (octal) values, or For more information please see .URLB https://flashrom.org/VT6421A "its wiki page" . .SS +.BR "atapromise " programmer +.IP +This programmer is currently limited to 32 kB, regardless of the actual size of the flash chip. This stems +from the fact that, on the tested device (a Promise Ultra100), not all of the chip's address lines were +actually connected. You may use this programmer to flash firmware updates, since these are only 16 kB in +size (padding to 32 kB is required). +.SS .BR "nicintel_eeprom " programmer .IP This is the first programmer module in flashrom that does not provide access to NOR flash chips but EEPROMs @@ -1059,8 +1068,8 @@ needs raw I/O port access. .BR satasii ", " nicintel ", " nicintel_eeprom " and " nicintel_spi need PCI configuration space read access and raw memory access. .sp -.B satamv -needs PCI configuration space read access, raw I/O port access and raw memory +.BR satamv " and " atapromise +need PCI configuration space read access, raw I/O port access and raw memory access. .sp .B serprog @@ -1076,7 +1085,7 @@ need access to the USB device via libusb. needs no access permissions at all. .sp .BR internal ", " nic3com ", " nicrealtek ", " nicnatsemi ", " -.BR gfxnvidia ", " drkaiser ", " satasii ", " satamv ", " atahpt" and " atavia +.BR gfxnvidia ", " drkaiser ", " satasii ", " satamv ", " atahpt ", " atavia " and " atapromise have to be run as superuser/root, and need additional raw access permission. .sp .BR serprog ", " buspirate_spi ", " dediprog ", " usbblaster_spi ", " ft2232_spi " and " pickit2_spi |
