summaryrefslogtreecommitdiffstats
path: root/flashrom.8
diff options
context:
space:
mode:
authorUwe Hermann <uwe@hermann-uwe.de>2011-10-14 20:33:14 +0000
committerUwe Hermann <uwe@hermann-uwe.de>2011-10-14 20:33:14 +0000
commitaeaa76a4c8df6b1407fd404055614c9db14c9764 (patch)
treea682fd11ab2f4aa6cb256187a565a5361359ec02 /flashrom.8
parent4d1ada86ce8524ca52271d4f7afeafd0a5e93c25 (diff)
downloadflashrom-aeaa76a4c8df6b1407fd404055614c9db14c9764.zip
flashrom-aeaa76a4c8df6b1407fd404055614c9db14c9764.tar.gz
TIAO/DIYGADGET USB Multi-Protocol Adapter (TUMPA) support
Thanks to TIAO/DIYGADGET for sponsoring a test device! This is an FTDI FT2232H based device which provides an easily accessible JTAG, SPI, I2C, serial breakout. The SPI part can be used to flash SPI flash chips using flashrom. http://www.diygadget.com/tiao-usb-multi-protocol-adapter-jtag-spi-i2c-serial.html http://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_User%27s_Manual#SPI_Connector_1 There are two SPI connectors (pin headers) on the board: SPI1, which is connected to the FT2232H's A interface, and SPI2, which is connected to the chip's B interface. Both can be used to flash SPI chips: flashrom -p ft2232_spi:type=tumpa,port=A flashrom -p ft2232_spi:type=tumpa,port=B The default interface is A, so for SPI1 you can also just write: flashrom -p ft2232_spi:type=tumpa I tested all operations on both interfaces, everything works fine. Corresponding to flashrom svn r1451. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Diffstat (limited to 'flashrom.8')
-rw-r--r--flashrom.86
1 files changed, 4 insertions, 2 deletions
diff --git a/flashrom.8 b/flashrom.8
index 76f25bd..7a012de 100644
--- a/flashrom.8
+++ b/flashrom.8
@@ -199,7 +199,8 @@ cards)"
based USB SPI programmer), including the DLP Design DLP-USB1232H, \
FTDI FT2232H Mini-Module, FTDI FT4232H Mini-Module, openbiosprog-spi, Amontec \
JTAGkey/JTAGkey-tiny/JTAGkey-2, Dangerous Prototypes Bus Blaster, \
-Olimex ARM-USB-TINY/-H, and Olimex ARM-USB-OCD/-H."
+Olimex ARM-USB-TINY/-H, Olimex ARM-USB-OCD/-H, and TIAO/DIYGADGET USB
+Multi-Protocol Adapter (TUMPA).
.sp
.BR "* serprog" " (for flash ROMs attached to a programmer speaking serprog), \
including AVR flasher by Urja Rannikko, AVR flasher by eightdot, \
@@ -441,7 +442,8 @@ syntax where
.B model
can be
.BR 2232H ", " 4232H ", " jtagkey ", " busblaster ", " openmoko ", " \
-arm-usb-tiny ", " arm-usb-tiny-h ", " arm-usb-ocd " or " arm-usb-ocd-h
+arm-usb-tiny ", " arm-usb-tiny-h ", " arm-usb-ocd ", " arm-usb-ocd-h \
+", or " tumpa
and
.B interface
can be
OpenPOWER on IntegriCloud