diff options
| author | Justin Chevrier <jchevrier@gmail.com> | 2015-02-08 21:58:10 +0000 |
|---|---|---|
| committer | Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> | 2015-02-08 21:58:10 +0000 |
| commit | f3973600404204013c403625a11bf434dade628c (patch) | |
| tree | 597dd6c02ecd223e56d3088682e1c5314409af1f /flashrom.8.tmpl | |
| parent | 03d4faca7aed125d48c69dd50119e0ec0bfd5978 (diff) | |
| download | flashrom-f3973600404204013c403625a11bf434dade628c.zip flashrom-f3973600404204013c403625a11bf434dade628c.tar.gz | |
Add support for the Microchip PICkit2 as an SPI programmer
This patch was inspired by the code in AVRDude (open source Atmel AVR
programmer) to support the PICkit2 written by Doug Brown [1]. The
Dediprog code in flashrom was used as the template for this code with
some reference to the ft2232 code as well.
[1] - https://github.com/steve-m/avrdude/blob/master/pickit2.c
Corresponding to flashrom svn r1881.
Signed-off-by: Justin Chevrier <jchevrier@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Diffstat (limited to 'flashrom.8.tmpl')
| -rw-r--r-- | flashrom.8.tmpl | 34 |
1 files changed, 32 insertions, 2 deletions
diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl index 799d5b9..8b5f98c 100644 --- a/flashrom.8.tmpl +++ b/flashrom.8.tmpl @@ -229,6 +229,8 @@ bitbanging adapter) .sp .BR "* mstarddc_spi" " (for SPI flash ROMs accessible through DDC in MSTAR-equipped displays)" .sp +.BR "* pickit2_spi" " (for SPI flash ROMs accessible via Microchip PICkit2)" +.sp Some programmers have optional or mandatory parameters which are described in detail in the .B PROGRAMMER-SPECIFIC INFORMATION @@ -736,6 +738,34 @@ More information about the Bus Pirate pull-up resistors and their purpose is ava .BR "http://dangerousprototypes.com/docs/Practical_guide_to_Bus_Pirate_pull-up_resistors " . Only the external supply voltage (Vpu) is supported as of this writing. .SS +.BR "pickit2_spi " programmer +An optional +.B voltage +parameter specifies the voltage the PICkit2 should use. The default unit is Volt if no unit is specified. +You can use +.BR mV ", " millivolt ", " V " or " Volt +as unit specifier. Syntax is +.sp +.B " flashrom \-p pickit2_spi:voltage=value" +.sp +where +.B value +can be +.BR 0V ", " 1.8V ", " 2.5V ", " 3.5V +or the equivalent in mV. +.sp +An optional +.B spispeed +parameter specifies the frequency of the SPI bus. Syntax is +.sp +.B " flashrom \-p pickit2_spi:spispeed=frequency" +.sp +where +.B frequency +can be +.BR 250k ", " 333k ", " 500k " or " 1M " +(in Hz). The default is a frequency of 1 MHz. +.SS .BR "dediprog " programmer An optional .B voltage @@ -992,7 +1022,7 @@ needs TCP access to the network or userspace access to a serial port. .B buspirate_spi needs userspace access to a serial port. .sp -.BR dediprog ", " ft2232_spi " and " usbblaster_spi +.BR dediprog ", " ft2232_spi " and " usbblaster_spi and " pickit2_spi need access to the USB device via libusb. .sp .B dummy @@ -1002,7 +1032,7 @@ needs no access permissions at all. .BR gfxnvidia ", " drkaiser ", " satasii ", " satamv ", " atahpt" and " atavia have to be run as superuser/root, and need additional raw access permission. .sp -.BR serprog ", " buspirate_spi ", " dediprog ", " usbblaster_spi " and " ft2232_spi +.BR serprog ", " buspirate_spi ", " dediprog ", " usbblaster_spi " and " ft2232_spi and " pickit2_spi can be run as normal user on most operating systems if appropriate device permissions are set. .sp |
