diff options
Diffstat (limited to 'src/mainboard/supermicro')
18 files changed, 0 insertions, 4800 deletions
diff --git a/src/mainboard/supermicro/h8dme/Config.lb b/src/mainboard/supermicro/h8dme/Config.lb deleted file mode 100644 index 18cde51..0000000 --- a/src/mainboard/supermicro/h8dme/Config.lb +++ /dev/null @@ -1,301 +0,0 @@ -## -## This file is part of the coreboot project. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -## CONFIG_XIP_ROM_SIZE must be a power of 2. -default CONFIG_XIP_ROM_SIZE = 64 * 1024 -include /config/failovercalculation.lb - -arch i386 end - -## -## Build the objects we have code for in this directory. -## - -driver mainboard.o -#needed by irq_tables and mptable and acpi_tables -object get_bus_conf.o - -if CONFIG_GENERATE_MP_TABLE object mptable.o end -if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end - - if CONFIG_USE_INIT - makerule ./auto.o - depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" - end - else - makerule ./auto.inc - depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" - action "perl -e 's/\.rodata/.rom.data/g' -pi $@" - action "perl -e 's/\.text/.section .rom.text/g' -pi $@" - end - end - -if CONFIG_USE_FAILOVER_IMAGE -else - if CONFIG_AP_CODE_IN_CAR - makerule ./apc_auto.o - depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@" - end - ldscript /arch/i386/init/ldscript_apc.lb - end -end - - -## -## Build our 16 bit and 32 bit coreboot entry code -## -if CONFIG_HAVE_FAILOVER_BOOT - if CONFIG_USE_FAILOVER_IMAGE - mainboardinit cpu/x86/16bit/entry16.inc - ldscript /cpu/x86/16bit/entry16.lds - end -else - if CONFIG_USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/entry16.inc - ldscript /cpu/x86/16bit/entry16.lds - end -end - -mainboardinit cpu/x86/32bit/entry32.inc - - if CONFIG_USE_INIT - ldscript /cpu/x86/32bit/entry32.lds - end - - if CONFIG_USE_INIT - ldscript /cpu/amd/car/cache_as_ram.lds - end - -## -## Build our reset vector (This is where coreboot is entered) -## -if CONFIG_HAVE_FAILOVER_BOOT - if CONFIG_USE_FAILOVER_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds - else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds - end -else - if CONFIG_USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds - else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds - end -end - -## -## Include an id string (For safe flashing) -## -mainboardinit arch/i386/lib/id.inc -ldscript /arch/i386/lib/id.lds - -## -## ROMSTRAP table for MCP55 -## -if CONFIG_HAVE_FAILOVER_BOOT - if CONFIG_USE_FAILOVER_IMAGE - mainboardinit southbridge/nvidia/mcp55/romstrap.inc - ldscript /southbridge/nvidia/mcp55/romstrap.lds - end -else - if CONFIG_USE_FALLBACK_IMAGE - mainboardinit southbridge/nvidia/mcp55/romstrap.inc - ldscript /southbridge/nvidia/mcp55/romstrap.lds - end -end - - ## - ## Setup Cache-As-Ram - ## - mainboardinit cpu/amd/car/cache_as_ram.inc - -### -### This is the early phase of coreboot startup -### Things are delicate and we test to see if we should -### failover to another image. -### -if CONFIG_HAVE_FAILOVER_BOOT - if CONFIG_USE_FAILOVER_IMAGE - ldscript /arch/i386/lib/failover_failover.lds - end -else - if CONFIG_USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds - end -end - -## -## Setup RAM -## - if CONFIG_USE_INIT - initobject auto.o - else - mainboardinit ./auto.inc - end - -## -## Include the secondary Configuration files -## -config chip.h - -chip northbridge/amd/amdk8/root_complex - device apic_cluster 0 on - chip cpu/amd/socket_F - device apic 0 on end - end - end - device pci_domain 0 on - chip northbridge/amd/amdk8 #mc0 - device pci 18.0 on end - device pci 18.0 on end - device pci 18.0 on - # devices on link 0, link 0 == LDT 0 - chip southbridge/nvidia/mcp55 - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627hf - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # SFI - io 0x62 = 0x100 - end - device pnp 2e.7 off # GPIO_GAME_MIDI - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # WDTO_PLED - device pnp 2e.9 off end # GPIO_SUSLED - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on # SM 0 - chip drivers/i2c/i2cmux2 - device i2c 48 off end - device i2c 49 off end - end - end # SM - device pci 1.1 on # SM 1 -#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus? -# chip drivers/generic/generic #PCIXA Slot1 -# device i2c 50 on end -# end -# chip drivers/generic/generic #PCIXB Slot1 -# device i2c 51 on end -# end -# chip drivers/generic/generic #PCIXB Slot2 -# device i2c 52 on end -# end -# chip drivers/generic/generic #PCI Slot1 -# device i2c 53 on end -# end -# chip drivers/generic/generic #Master MCP55 PCI-E -# device i2c 54 on end -# end -# chip drivers/generic/generic #Slave MCP55 PCI-E -# device i2c 55 on end -# end - chip drivers/generic/generic #MAC EEPROM - device i2c 51 on end - end - - end # SM - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on # PCI - device pci 6.0 on end - end - device pci 6.1 on end # AZA - device pci 8.0 on end # NIC - device pci 9.0 on end # NIC - device pci a.0 on # PCI E 5 - device pci 0.0 on #nec pci-x - end - device pci 0.1 on #nec pci-x - device pci 4.0 on end #scsi - device pci 4.1 on end #scsi - end - end - device pci b.0 on end # PCI E 4 - device pci c.0 on end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 on end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_addr" = "0x51" - end - end # device pci 18.0 - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end # mc0 - - end # PCI domain - -# chip drivers/generic/debug -# device pnp 0.0 off end # chip name -# device pnp 0.1 on end # pci_regs_all -# device pnp 0.2 off end # mem -# device pnp 0.3 off end # cpuid -# device pnp 0.4 on end # smbus_regs_all -# device pnp 0.5 off end # dual core msr -# device pnp 0.6 off end # cache size -# device pnp 0.7 off end # tsc -# device pnp 0.8 off end # io -# device pnp 0.9 on end # io -# end -end #root_complex diff --git a/src/mainboard/supermicro/h8dme/Options.lb b/src/mainboard/supermicro/h8dme/Options.lb deleted file mode 100644 index 85d8331..0000000 --- a/src/mainboard/supermicro/h8dme/Options.lb +++ /dev/null @@ -1,355 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007 AMD -## Written by Yinghai Lu <yinghailu@amd.com> for AMD. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -uses CONFIG_GENERATE_MP_TABLE -uses CONFIG_GENERATE_PIRQ_TABLE -uses CONFIG_GENERATE_ACPI_TABLES -uses CONFIG_HAVE_ACPI_RESUME -uses CONFIG_ACPI_SSDTX_NUM -uses CONFIG_USE_FALLBACK_IMAGE -uses CONFIG_USE_FAILOVER_IMAGE -uses CONFIG_HAVE_FALLBACK_BOOT -uses CONFIG_HAVE_FAILOVER_BOOT -uses CONFIG_HAVE_HARD_RESET -uses CONFIG_IRQ_SLOT_COUNT -uses CONFIG_HAVE_OPTION_TABLE -uses CONFIG_MAX_CPUS -uses CONFIG_MAX_PHYSICAL_CPUS -uses CONFIG_LOGICAL_CPUS -uses CONFIG_IOAPIC -uses CONFIG_SMP -uses CONFIG_FALLBACK_SIZE -uses CONFIG_FAILOVER_SIZE -uses CONFIG_ROM_SIZE -uses CONFIG_ROM_SECTION_SIZE -uses CONFIG_ROM_IMAGE_SIZE -uses CONFIG_ROM_SECTION_SIZE -uses CONFIG_ROM_SECTION_OFFSET -uses CONFIG_ROM_PAYLOAD -uses CONFIG_COMPRESSED_PAYLOAD_NRV2B -uses CONFIG_COMPRESSED_PAYLOAD_LZMA -uses CONFIG_PRECOMPRESSED_PAYLOAD -uses CONFIG_ROMBASE -uses CONFIG_XIP_ROM_SIZE -uses CONFIG_XIP_ROM_BASE -uses CONFIG_STACK_SIZE -uses CONFIG_HEAP_SIZE -uses CONFIG_USE_OPTION_TABLE -uses CONFIG_HAVE_LOW_TABLES -uses CONFIG_MULTIBOOT -uses CONFIG_LB_CKS_RANGE_START -uses CONFIG_LB_CKS_RANGE_END -uses CONFIG_LB_CKS_LOC -uses CONFIG_MAINBOARD_PART_NUMBER -uses CONFIG_MAINBOARD_VENDOR -uses CONFIG_MAINBOARD -uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses COREBOOT_EXTRA_VERSION -uses CONFIG_RAMBASE -uses CONFIG_TTYS0_BAUD -uses CONFIG_TTYS0_BASE -uses CONFIG_TTYS0_LCS -uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL -uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL -uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL -uses CONFIG_CONSOLE_SERIAL8250 -uses CONFIG_HAVE_INIT_TIMER -uses CONFIG_GDB_STUB -uses CONFIG_GDB_STUB -uses CONFIG_CROSS_COMPILE -uses CC -uses HOSTCC -uses CONFIG_OBJCOPY -uses CONFIG_CONSOLE_VGA -uses CONFIG_PCI_ROM_RUN -uses CONFIG_HW_MEM_HOLE_SIZEK -uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC -uses CONFIG_K8_HT_FREQ_1G_SUPPORT - -uses CONFIG_HT_CHAIN_UNITID_BASE -uses CONFIG_HT_CHAIN_END_UNITID_BASE -uses CONFIG_SB_HT_CHAIN_ON_BUS0 -uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY - -uses CONFIG_USE_DCACHE_RAM -uses CONFIG_DCACHE_RAM_BASE -uses CONFIG_DCACHE_RAM_SIZE -uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE -uses CONFIG_USE_INIT - -uses CONFIG_SERIAL_CPU_INIT - -uses CONFIG_ENABLE_APIC_EXT_ID -uses CONFIG_APIC_ID_OFFSET -uses CONFIG_LIFT_BSP_APIC_ID - -uses CONFIG_PCI_64BIT_PREF_MEM - -uses CONFIG_RAMTOP - -uses CONFIG_AP_CODE_IN_CAR - -uses CONFIG_MEM_TRAIN_SEQ - -uses CONFIG_WAIT_BEFORE_CPUS_INIT - -uses CONFIG_USE_PRINTK_IN_CAR - -uses CONFIG_ID_SECTION_OFFSET - -### -### Build options -### - -## -## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. -## -#default CONFIG_ROM_SIZE=524288 -default CONFIG_ROM_SIZE=0x100000 - -default CONFIG_HAVE_LOW_TABLES = 0 -default CONFIG_MULTIBOOT=0 - -## -## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use -## - -#FALLBACK: 256K-4K -default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE -#FAILOVER: 4K -default CONFIG_FAILOVER_SIZE=0x01000 - -#more 1M for pgtbl -default CONFIG_RAMTOP=2048*1024 - -## -## Build code for the fallback boot -## -default CONFIG_HAVE_FALLBACK_BOOT=1 -default CONFIG_HAVE_FAILOVER_BOOT=1 - -## -## Build code to reset the motherboard from coreboot -## -default CONFIG_HAVE_HARD_RESET=1 - -## -## Build code to export a programmable irq routing table -## -default CONFIG_GENERATE_PIRQ_TABLE=1 -default CONFIG_IRQ_SLOT_COUNT=11 - -## -## Build code to export an x86 MP table -## Useful for specifying IRQ routing values -## -default CONFIG_GENERATE_MP_TABLE=1 - -## ACPI tables will be included -default CONFIG_GENERATE_ACPI_TABLES=0 - -## -## Build code to export a CMOS option table -## -default CONFIG_HAVE_OPTION_TABLE=1 - -## -## Move the default coreboot cmos range off of AMD RTC registers -## -default CONFIG_LB_CKS_RANGE_START=49 -default CONFIG_LB_CKS_RANGE_END=122 -default CONFIG_LB_CKS_LOC=123 - -## -## Build code for SMP support -## Only worry about 2 micro processors -## -default CONFIG_SMP=1 -default CONFIG_MAX_CPUS=4 -default CONFIG_MAX_PHYSICAL_CPUS=2 -default CONFIG_LOGICAL_CPUS=1 - -default CONFIG_SERIAL_CPU_INIT=0 - -default CONFIG_ENABLE_APIC_EXT_ID=0 -default CONFIG_APIC_ID_OFFSET=0x10 -default CONFIG_LIFT_BSP_APIC_ID=1 - -#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead. -#2G -#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000 -#1G -default CONFIG_HW_MEM_HOLE_SIZEK=0x100000 -#512M -#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000 - -#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy -#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1 - -#Opteron K8 1G HT Support -default CONFIG_K8_HT_FREQ_1G_SUPPORT=1 - -#VGA Console -default CONFIG_CONSOLE_VGA=1 -default CONFIG_PCI_ROM_RUN=1 - -#HT Unit ID offset, default is 1, the typical one, 0 mean only one HT device -default CONFIG_HT_CHAIN_UNITID_BASE=0 - -#real SB Unit ID, default is 0x20, mean dont touch it at last -#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6 - -#make the SB HT chain on bus 0, default is not (0) -default CONFIG_SB_HT_CHAIN_ON_BUS0=2 - -#only offset for SB chain?, default is yes(1) -default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 - -#allow capable device use that above 4G -#default CONFIG_PCI_64BIT_PREF_MEM=1 - -## -## enable CACHE_AS_RAM specifics -## -default CONFIG_USE_DCACHE_RAM=1 -default CONFIG_DCACHE_RAM_BASE=0xc8000 -default CONFIG_DCACHE_RAM_SIZE=0x08000 -default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000 -default CONFIG_USE_INIT=0 - -default CONFIG_AP_CODE_IN_CAR=1 -default CONFIG_MEM_TRAIN_SEQ=1 -default CONFIG_WAIT_BEFORE_CPUS_INIT=1 - -## -## Build code to setup a generic IOAPIC -## -default CONFIG_IOAPIC=1 - -## -## Clean up the motherboard id strings -## -default CONFIG_MAINBOARD_PART_NUMBER="h8dme" -default CONFIG_MAINBOARD_VENDOR="Supermicro" -default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15d9 -default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x1511 - -### -### coreboot layout values -### - -## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default CONFIG_ROM_IMAGE_SIZE = 65536 - CONFIG_FAILOVER_SIZE - -## -## Use a small 8K stack -## -default CONFIG_STACK_SIZE=0x2000 - -## -## Use a small 32K heap -## -default CONFIG_HEAP_SIZE=0x8000 - -## -## Only use the option table in a normal image -## -default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE ) - -## -## Coreboot C code runs at this location in RAM -## -default CONFIG_RAMBASE=0x00100000 - -## -## Load the payload from the ROM -## -default CONFIG_ROM_PAYLOAD = 1 - -#default CONFIG_COMPRESSED_PAYLOAD = 1 - -### -### Defaults of options that you may want to override in the target config file -### - -## -## The default compiler -## -default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" - -## -## Disable the gdb stub by default -## -default CONFIG_GDB_STUB=0 - -## -## The Serial Console -## -default CONFIG_USE_PRINTK_IN_CAR=1 - -# To Enable the Serial Console -default CONFIG_CONSOLE_SERIAL8250=1 - -## Select the serial console baud rate -default CONFIG_TTYS0_BAUD=115200 -#default CONFIG_TTYS0_BAUD=57600 -#default CONFIG_TTYS0_BAUD=38400 -#default CONFIG_TTYS0_BAUD=19200 -#default CONFIG_TTYS0_BAUD=9600 -#default CONFIG_TTYS0_BAUD=4800 -#default CONFIG_TTYS0_BAUD=2400 -#default CONFIG_TTYS0_BAUD=1200 - -# Select the serial console base port -default CONFIG_TTYS0_BASE=0x3f8 - -# Select the serial protocol -# This defaults to 8 data bits, 1 stop bit, and no parity -default CONFIG_TTYS0_LCS=0x3 - -## -### Select the coreboot loglevel -## -## EMERG 1 system is unusable -## ALERT 2 action must be taken immediately -## CRIT 3 critical conditions -## ERR 4 error conditions -## WARNING 5 warning conditions -## NOTICE 6 normal but significant condition -## INFO 7 informational -## CONFIG_DEBUG 8 debug-level messages -## SPEW 9 Way too many details - -## Request this level of debugging output -default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=9 -## At a maximum only compile in this level of debugging -default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9 - -## -## Select power on after power fail setting -default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" - -default CONFIG_ID_SECTION_OFFSET=0x80 - -### End Options.lb -end diff --git a/src/mainboard/supermicro/h8dmr/Config.lb b/src/mainboard/supermicro/h8dmr/Config.lb deleted file mode 100644 index 13db09a..0000000 --- a/src/mainboard/supermicro/h8dmr/Config.lb +++ /dev/null @@ -1,323 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007 AMD -## Written by Yinghai Lu <yinghailu@amd.com> for AMD. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -## CONFIG_XIP_ROM_SIZE must be a power of 2. -default CONFIG_XIP_ROM_SIZE = 64 * 1024 -include /config/failovercalculation.lb - -arch i386 end - -## -## Build the objects we have code for in this directory. -## - -driver mainboard.o -#needed by irq_tables and mptable and acpi_tables -object get_bus_conf.o - -if CONFIG_GENERATE_MP_TABLE object mptable.o end -if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end - - if CONFIG_USE_INIT - makerule ./auto.o - depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" - end - else - makerule ./auto.inc - depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" - action "perl -e 's/\.rodata/.rom.data/g' -pi $@" - action "perl -e 's/\.text/.section .rom.text/g' -pi $@" - end - end - -if CONFIG_USE_FAILOVER_IMAGE -else - if CONFIG_AP_CODE_IN_CAR - makerule ./apc_auto.o - depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@" - end - end -end - - -## -## Build our 16 bit and 32 bit coreboot entry code -## -if CONFIG_HAVE_FAILOVER_BOOT - if CONFIG_USE_FAILOVER_IMAGE - mainboardinit cpu/x86/16bit/entry16.inc - ldscript /cpu/x86/16bit/entry16.lds - end -else - if CONFIG_USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/entry16.inc - ldscript /cpu/x86/16bit/entry16.lds - end -end - -mainboardinit cpu/x86/32bit/entry32.inc - - if CONFIG_USE_INIT - ldscript /cpu/x86/32bit/entry32.lds - end - - if CONFIG_USE_INIT - ldscript /cpu/amd/car/cache_as_ram.lds - end - -## -## Build our reset vector (This is where coreboot is entered) -## -if CONFIG_HAVE_FAILOVER_BOOT - if CONFIG_USE_FAILOVER_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds - else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds - end -else - if CONFIG_USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds - else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds - end -end - -## -## Include an id string (For safe flashing) -## -mainboardinit arch/i386/lib/id.inc -ldscript /arch/i386/lib/id.lds - -## -## ROMSTRAP table for MCP55 -## -if CONFIG_HAVE_FAILOVER_BOOT - if CONFIG_USE_FAILOVER_IMAGE - mainboardinit southbridge/nvidia/mcp55/romstrap.inc - ldscript /southbridge/nvidia/mcp55/romstrap.lds - end -else - if CONFIG_USE_FALLBACK_IMAGE - mainboardinit southbridge/nvidia/mcp55/romstrap.inc - ldscript /southbridge/nvidia/mcp55/romstrap.lds - end -end - - ## - ## Setup Cache-As-Ram - ## - mainboardinit cpu/amd/car/cache_as_ram.inc - -### -### This is the early phase of coreboot startup -### Things are delicate and we test to see if we should -### failover to another image. -### -if CONFIG_HAVE_FAILOVER_BOOT - if CONFIG_USE_FAILOVER_IMAGE - ldscript /arch/i386/lib/failover_failover.lds - end -else - if CONFIG_USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds - end -end - -## -## Setup RAM -## - if CONFIG_USE_INIT - initobject auto.o - else - mainboardinit ./auto.inc - end - -## -## Include the secondary Configuration files -## -config chip.h - -chip northbridge/amd/amdk8/root_complex - device apic_cluster 0 on - chip cpu/amd/socket_F - device apic 0 on end - end - end - device pci_domain 0 on - chip northbridge/amd/amdk8 #mc0 - device pci 18.0 on end - device pci 18.0 on end - device pci 18.0 on - # devices on link 0, link 0 == LDT 0 - chip southbridge/nvidia/mcp55 - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627hf - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # SFI - io 0x62 = 0x100 - end - device pnp 2e.7 off # GPIO_GAME_MIDI - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # WDTO_PLED - device pnp 2e.9 off end # GPIO_SUSLED - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic #dimm 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic #dimm 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic #dimm 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic #dimm 1-1-1 - device i2c 57 on end - end - end # SM - device pci 1.1 on # SM 1 -#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus? -# chip drivers/generic/generic #PCIXA Slot1 -# device i2c 50 on end -# end -# chip drivers/generic/generic #PCIXB Slot1 -# device i2c 51 on end -# end -# chip drivers/generic/generic #PCIXB Slot2 -# device i2c 52 on end -# end -# chip drivers/generic/generic #PCI Slot1 -# device i2c 53 on end -# end -# chip drivers/generic/generic #Master MCP55 PCI-E -# device i2c 54 on end -# end -# chip drivers/generic/generic #Slave MCP55 PCI-E -# device i2c 55 on end -# end - chip drivers/generic/generic #MAC EEPROM - device i2c 51 on end - end - - end # SM - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on # PCI - device pci 6.0 on end - end - device pci 6.1 on end # AZA - device pci 8.0 on end # NIC - device pci 9.0 on end # NIC - device pci a.0 on # PCI E 5 - device pci 0.0 on #nec pci-x - end - device pci 0.1 on #nec pci-x - device pci 4.0 on end #scsi - device pci 4.1 on end #scsi - end - end - device pci b.0 on end # PCI E 4 - device pci c.0 on end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 on end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_addr" = "0x51" - end - end # device pci 18.0 - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end # mc0 - - end # PCI domain - -# chip drivers/generic/debug -# device pnp 0.0 off end # chip name -# device pnp 0.1 on end # pci_regs_all -# device pnp 0.2 off end # mem -# device pnp 0.3 off end # cpuid -# device pnp 0.4 on end # smbus_regs_all -# device pnp 0.5 off end # dual core msr -# device pnp 0.6 off end # cache size -# device pnp 0.7 off end # tsc -# device pnp 0.8 off end # io -# device pnp 0.9 on end # io -# end -end #root_complex diff --git a/src/mainboard/supermicro/h8dmr/Options.lb b/src/mainboard/supermicro/h8dmr/Options.lb deleted file mode 100644 index f0e9082..0000000 --- a/src/mainboard/supermicro/h8dmr/Options.lb +++ /dev/null @@ -1,353 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007 AMD -## Written by Yinghai Lu <yinghailu@amd.com> for AMD. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -uses CONFIG_GENERATE_MP_TABLE -uses CONFIG_GENERATE_PIRQ_TABLE -uses CONFIG_GENERATE_ACPI_TABLES -uses CONFIG_HAVE_ACPI_RESUME -uses CONFIG_ACPI_SSDTX_NUM -uses CONFIG_USE_FALLBACK_IMAGE -uses CONFIG_USE_FAILOVER_IMAGE -uses CONFIG_HAVE_FALLBACK_BOOT -uses CONFIG_HAVE_FAILOVER_BOOT -uses CONFIG_HAVE_HARD_RESET -uses CONFIG_IRQ_SLOT_COUNT -uses CONFIG_HAVE_OPTION_TABLE -uses CONFIG_MAX_CPUS -uses CONFIG_MAX_PHYSICAL_CPUS -uses CONFIG_LOGICAL_CPUS -uses CONFIG_IOAPIC -uses CONFIG_SMP -uses CONFIG_FALLBACK_SIZE -uses CONFIG_FAILOVER_SIZE -uses CONFIG_ROM_SIZE -uses CONFIG_ROM_SECTION_SIZE -uses CONFIG_ROM_IMAGE_SIZE -uses CONFIG_ROM_SECTION_SIZE -uses CONFIG_ROM_SECTION_OFFSET -uses CONFIG_ROM_PAYLOAD -uses CONFIG_COMPRESSED_PAYLOAD_NRV2B -uses CONFIG_COMPRESSED_PAYLOAD_LZMA -uses CONFIG_PRECOMPRESSED_PAYLOAD -uses CONFIG_ROMBASE -uses CONFIG_XIP_ROM_SIZE -uses CONFIG_XIP_ROM_BASE -uses CONFIG_STACK_SIZE -uses CONFIG_HEAP_SIZE -uses CONFIG_USE_OPTION_TABLE -uses CONFIG_LB_CKS_RANGE_START -uses CONFIG_LB_CKS_RANGE_END -uses CONFIG_LB_CKS_LOC -uses CONFIG_MAINBOARD_PART_NUMBER -uses CONFIG_MAINBOARD_VENDOR -uses CONFIG_MAINBOARD -uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses COREBOOT_EXTRA_VERSION -uses CONFIG_RAMBASE -uses CONFIG_TTYS0_BAUD -uses CONFIG_TTYS0_BASE -uses CONFIG_TTYS0_LCS -uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL -uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL -uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL -uses CONFIG_CONSOLE_SERIAL8250 -uses CONFIG_HAVE_INIT_TIMER -uses CONFIG_GDB_STUB -uses CONFIG_GDB_STUB -uses CONFIG_CROSS_COMPILE -uses CC -uses HOSTCC -uses CONFIG_OBJCOPY -uses CONFIG_CONSOLE_VGA -uses CONFIG_PCI_ROM_RUN -uses CONFIG_HW_MEM_HOLE_SIZEK -uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC -uses CONFIG_K8_HT_FREQ_1G_SUPPORT - -uses CONFIG_HT_CHAIN_UNITID_BASE -uses CONFIG_HT_CHAIN_END_UNITID_BASE -uses CONFIG_SB_HT_CHAIN_ON_BUS0 -uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY - -uses CONFIG_USE_DCACHE_RAM -uses CONFIG_DCACHE_RAM_BASE -uses CONFIG_DCACHE_RAM_SIZE -uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE -uses CONFIG_USE_INIT - -uses CONFIG_SERIAL_CPU_INIT - -uses CONFIG_ENABLE_APIC_EXT_ID -uses CONFIG_APIC_ID_OFFSET -uses CONFIG_LIFT_BSP_APIC_ID - -uses CONFIG_PCI_64BIT_PREF_MEM - -uses CONFIG_RAMTOP - -uses CONFIG_AP_CODE_IN_CAR - -uses CONFIG_MEM_TRAIN_SEQ - -uses CONFIG_WAIT_BEFORE_CPUS_INIT - -uses CONFIG_USE_PRINTK_IN_CAR - -uses CONFIG_ID_SECTION_OFFSET - -### -### Build options -### - -## -## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. -## -#default CONFIG_ROM_SIZE=524288 -default CONFIG_ROM_SIZE=0x100000 - -## -## CONFIG_FALLBACK_SIZE is the amount of the ROM the ROM part of the fallback image will use -## -default CONFIG_FALLBACK_SIZE=CONFIG_ROM_IMAGE_SIZE -#FAILOVER: 4K -default CONFIG_FAILOVER_SIZE=0x01000 - -#more 1M for pgtbl -default CONFIG_RAMTOP=2048*1024 - -## -## Build code for the fallback boot -## -default CONFIG_HAVE_FALLBACK_BOOT=1 -default CONFIG_HAVE_FAILOVER_BOOT=1 - -## -## Build code to reset the motherboard from coreboot -## -default CONFIG_HAVE_HARD_RESET=1 - -## -## Build code to export a programmable irq routing table -## -default CONFIG_GENERATE_PIRQ_TABLE=1 -default CONFIG_IRQ_SLOT_COUNT=11 - -## -## Build code to export an x86 MP table -## Useful for specifying IRQ routing values -## -default CONFIG_GENERATE_MP_TABLE=1 - -## ACPI tables will be included -default CONFIG_GENERATE_ACPI_TABLES=0 - -## -## Build code to export a CMOS option table -## -default CONFIG_HAVE_OPTION_TABLE=1 - -## -## Move the default coreboot cmos range off of AMD RTC registers -## -default CONFIG_LB_CKS_RANGE_START=49 -default CONFIG_LB_CKS_RANGE_END=122 -default CONFIG_LB_CKS_LOC=123 - -## -## Build code for SMP support -## Only worry about 2 micro processors -## -default CONFIG_SMP=1 -default CONFIG_MAX_CPUS=4 -default CONFIG_MAX_PHYSICAL_CPUS=2 -default CONFIG_LOGICAL_CPUS=1 - -default CONFIG_SERIAL_CPU_INIT=0 - -default CONFIG_ENABLE_APIC_EXT_ID=0 -default CONFIG_APIC_ID_OFFSET=0x10 -default CONFIG_LIFT_BSP_APIC_ID=1 - -#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead. -#2G -#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000 -#1G -default CONFIG_HW_MEM_HOLE_SIZEK=0x100000 -#512M -#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000 - -#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy -#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1 - -#Opteron K8 1G HT Support -default CONFIG_K8_HT_FREQ_1G_SUPPORT=1 - -#VGA Console -default CONFIG_CONSOLE_VGA=1 -default CONFIG_PCI_ROM_RUN=1 - -#HT Unit ID offset, default is 1, the typical one, 0 mean only one HT device -default CONFIG_HT_CHAIN_UNITID_BASE=0 - -#real SB Unit ID, default is 0x20, mean dont touch it at last -#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6 - -#make the SB HT chain on bus 0, default is not (0) -default CONFIG_SB_HT_CHAIN_ON_BUS0=2 - -#only offset for SB chain?, default is yes(1) -default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 - -#allow capable device use that above 4G -#default CONFIG_PCI_64BIT_PREF_MEM=1 - -## -## enable CACHE_AS_RAM specifics -## -default CONFIG_USE_DCACHE_RAM=1 -default CONFIG_DCACHE_RAM_BASE=0xc8000 -default CONFIG_DCACHE_RAM_SIZE=0x08000 -default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000 -default CONFIG_USE_INIT=0 - -default CONFIG_AP_CODE_IN_CAR=0 -default CONFIG_MEM_TRAIN_SEQ=1 -default CONFIG_WAIT_BEFORE_CPUS_INIT=1 - -## -## Build code to setup a generic IOAPIC -## -default CONFIG_IOAPIC=1 - -## -## Clean up the motherboard id strings -## -default CONFIG_MAINBOARD_PART_NUMBER="h8dmr" -default CONFIG_MAINBOARD_VENDOR="Supermicro" -default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15d9 -default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x1511 - -### -### coreboot layout values -### - -## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default CONFIG_ROM_IMAGE_SIZE = 0xf000 - - -## -## Use a small 8K stack -## -default CONFIG_STACK_SIZE=0x2000 - -## -## Use a small 32K heap -## -default CONFIG_HEAP_SIZE=0x8000 - -## -## Only use the option table in a normal image -## -default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE ) - -## -## Coreboot C code runs at this location in RAM -## -default CONFIG_RAMBASE=0x00100000 - -## -## Load the payload from the ROM -## -default CONFIG_ROM_PAYLOAD = 1 - -#default CONFIG_COMPRESSED_PAYLOAD = 1 - -### -### Defaults of options that you may want to override in the target config file -### - -## -## The default compiler -## -default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" - -## -## Disable the gdb stub by default -## -default CONFIG_GDB_STUB=0 - -## -## The Serial Console -## -default CONFIG_USE_PRINTK_IN_CAR=1 - -# To Enable the Serial Console -default CONFIG_CONSOLE_SERIAL8250=1 - -## Select the serial console baud rate -default CONFIG_TTYS0_BAUD=115200 -#default CONFIG_TTYS0_BAUD=57600 -#default CONFIG_TTYS0_BAUD=38400 -#default CONFIG_TTYS0_BAUD=19200 -#default CONFIG_TTYS0_BAUD=9600 -#default CONFIG_TTYS0_BAUD=4800 -#default CONFIG_TTYS0_BAUD=2400 -#default CONFIG_TTYS0_BAUD=1200 - -# Select the serial console base port -default CONFIG_TTYS0_BASE=0x3f8 - -# Select the serial protocol -# This defaults to 8 data bits, 1 stop bit, and no parity -default CONFIG_TTYS0_LCS=0x3 - -## -### Select the coreboot loglevel -## -## EMERG 1 system is unusable -## ALERT 2 action must be taken immediately -## CRIT 3 critical conditions -## ERR 4 error conditions -## WARNING 5 warning conditions -## NOTICE 6 normal but significant condition -## INFO 7 informational -## DEBUG 8 debug-level messages -## SPEW 9 Way too many details - -## Request this level of debugging output -default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 -## At a maximum only compile in this level of debugging -default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 - -## -## Select power on after power fail setting -default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" - -default CONFIG_USE_FAILOVER_IMAGE=0 -default CONFIG_USE_FALLBACK_IMAGE=0 -default CONFIG_XIP_ROM_SIZE=CONFIG_FAILOVER_SIZE - -default CONFIG_ID_SECTION_OFFSET=0x80 - -### End Options.lb -end diff --git a/src/mainboard/supermicro/h8dmr_fam10/Config.lb b/src/mainboard/supermicro/h8dmr_fam10/Config.lb deleted file mode 100644 index fe2d1b6..0000000 --- a/src/mainboard/supermicro/h8dmr_fam10/Config.lb +++ /dev/null @@ -1,333 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007 AMD -## Written by Yinghai Lu <yinghailu@amd.com> for AMD. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -## CONFIG_XIP_ROM_SIZE must be a power of 2. -# for testing with -O != s. FIXME -#default CONFIG_XIP_ROM_SIZE = 128 * 1024 -default CONFIG_XIP_ROM_SIZE = 128 * 1024 -include /config/failovercalculation.lb - -arch i386 end - -## -## Build the objects we have code for in this directory. -## - -driver mainboard.o -#needed by irq_tables and mptable and acpi_tables -object get_bus_conf.o - -if CONFIG_GENERATE_MP_TABLE object mptable.o end -if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end - - if CONFIG_USE_INIT - makerule ./auto.o - depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" - end - else - makerule ./auto.inc - depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" - action "perl -e 's/\.rodata/.rom.data/g' -pi $@" - action "perl -e 's/\.text/.section .rom.text/g' -pi $@" - end - end - -if CONFIG_USE_FAILOVER_IMAGE -else - if CONFIG_AP_CODE_IN_CAR - makerule ./apc_auto.o - depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@" - end - end -end - - -## -## Build our 16 bit and 32 bit coreboot entry code -## -if CONFIG_HAVE_FAILOVER_BOOT - if CONFIG_USE_FAILOVER_IMAGE - mainboardinit cpu/x86/16bit/entry16.inc - ldscript /cpu/x86/16bit/entry16.lds - end -else - if CONFIG_USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/entry16.inc - ldscript /cpu/x86/16bit/entry16.lds - end -end - -mainboardinit cpu/x86/32bit/entry32.inc - - if CONFIG_USE_INIT - ldscript /cpu/x86/32bit/entry32.lds - end - - if CONFIG_USE_INIT - ldscript /cpu/amd/car/cache_as_ram.lds - end - -## -## Build our reset vector (This is where coreboot is entered) -## -if CONFIG_HAVE_FAILOVER_BOOT - if CONFIG_USE_FAILOVER_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds - else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds - end -else - if CONFIG_USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds - else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds - end -end - -## -## Include an id string (For safe flashing) -## -mainboardinit arch/i386/lib/id.inc -ldscript /arch/i386/lib/id.lds - -## -## ROMSTRAP table for MCP55 -## -if CONFIG_HAVE_FAILOVER_BOOT - if CONFIG_USE_FAILOVER_IMAGE - mainboardinit southbridge/nvidia/mcp55/romstrap.inc - ldscript /southbridge/nvidia/mcp55/romstrap.lds - end -else - if CONFIG_USE_FALLBACK_IMAGE - mainboardinit southbridge/nvidia/mcp55/romstrap.inc - ldscript /southbridge/nvidia/mcp55/romstrap.lds - end -end - - ## - ## Setup Cache-As-Ram - ## - mainboardinit cpu/amd/car/cache_as_ram.inc - -### -### This is the early phase of coreboot startup -### Things are delicate and we test to see if we should -### failover to another image. -### -if CONFIG_HAVE_FAILOVER_BOOT - if CONFIG_USE_FAILOVER_IMAGE - ldscript /arch/i386/lib/failover_failover.lds - end -else - if CONFIG_USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds - end -end - -## -## Setup RAM -## - if CONFIG_USE_INIT - initobject auto.o - else - mainboardinit ./auto.inc - end - -## -## Include the secondary Configuration files -## -config chip.h - -dir /southbridge/nvidia/mcp55 - -chip northbridge/amd/amdfam10/root_complex - device apic_cluster 0 on - chip cpu/amd/socket_F_1207 - device apic 0 on end - end - end - device pci_domain 0 on - chip northbridge/amd/amdfam10 #mc0 - device pci 18.0 on end - device pci 18.0 on end - device pci 18.0 on - # SB on link 2.0 - chip southbridge/nvidia/mcp55 - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627hf - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # SFI - io 0x62 = 0x100 - end - device pnp 2e.7 off # GPIO_GAME_MIDI - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # WDTO_PLED - device pnp 2e.9 off end # GPIO_SUSLED - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic #dimm 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic #dimm 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic #dimm 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic #dimm 1-1-1 - device i2c 57 on end - end - end # SM - device pci 1.1 on # SM 1 -#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus? -# chip drivers/generic/generic #PCIXA Slot1 -# device i2c 50 on end -# end -# chip drivers/generic/generic #PCIXB Slot1 -# device i2c 51 on end -# end -# chip drivers/generic/generic #PCIXB Slot2 -# device i2c 52 on end -# end -# chip drivers/generic/generic #PCI Slot1 -# device i2c 53 on end -# end -# chip drivers/generic/generic #Master MCP55 PCI-E -# device i2c 54 on end -# end -# chip drivers/generic/generic #Slave MCP55 PCI-E -# device i2c 55 on end -# end - chip drivers/generic/generic #MAC EEPROM - device i2c 51 on end - end - - end # SM - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on # PCI - device pci 6.0 on end - end - device pci 6.1 on end # AZA - device pci 8.0 on end # NIC - device pci 9.0 on end # NIC - device pci a.0 on # PCI E 5 - device pci 0.0 on #nec pci-x - end - device pci 0.1 on #nec pci-x - device pci 4.0 on end #scsi - device pci 4.1 on end #scsi - end - end - device pci b.0 on end # PCI E 4 - device pci c.0 on end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 on end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_addr" = "0x51" - end - end # device pci 18.0 - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 19.0 on end - device pci 19.1 on end - device pci 19.2 on end - device pci 19.3 on end - device pci 19.4 on end - end # mc0 - - end # PCI domain - -# chip drivers/generic/debug -# device pnp 0.0 off end # chip name -# device pnp 0.1 on end # pci_regs_all -# device pnp 0.2 off end # mem -# device pnp 0.3 off end # cpuid -# device pnp 0.4 on end # smbus_regs_all -# device pnp 0.5 off end # dual core msr -# device pnp 0.6 off end # cache size -# device pnp 0.7 off end # tsc -# device pnp 0.8 off end # io -# device pnp 0.9 on end # io -# end -end #root_complex diff --git a/src/mainboard/supermicro/h8dmr_fam10/Options.lb b/src/mainboard/supermicro/h8dmr_fam10/Options.lb deleted file mode 100644 index a7d3ca8..0000000 --- a/src/mainboard/supermicro/h8dmr_fam10/Options.lb +++ /dev/null @@ -1,363 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007 AMD -## Written by Yinghai Lu <yinghailu@amd.com> for AMD. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -uses CONFIG_GENERATE_MP_TABLE -uses CONFIG_GENERATE_PIRQ_TABLE -uses CONFIG_GENERATE_ACPI_TABLES -uses CONFIG_HAVE_ACPI_RESUME -uses CONFIG_ACPI_SSDTX_NUM -uses CONFIG_USE_FALLBACK_IMAGE -uses CONFIG_USE_FAILOVER_IMAGE -uses CONFIG_HAVE_FALLBACK_BOOT -uses CONFIG_HAVE_FAILOVER_BOOT -uses CONFIG_HAVE_HARD_RESET -uses CONFIG_IRQ_SLOT_COUNT -uses CONFIG_HAVE_OPTION_TABLE -uses CONFIG_MAX_CPUS -uses CONFIG_MAX_PHYSICAL_CPUS -uses CONFIG_LOGICAL_CPUS -uses CONFIG_IOAPIC -uses CONFIG_SMP -uses CONFIG_FALLBACK_SIZE -uses CONFIG_FAILOVER_SIZE -uses CONFIG_ROM_SIZE -uses CONFIG_ROM_SECTION_SIZE -uses CONFIG_ROM_IMAGE_SIZE -uses CONFIG_ROM_SECTION_SIZE -uses CONFIG_ROM_SECTION_OFFSET -uses CONFIG_ROM_PAYLOAD -uses CONFIG_COMPRESSED_PAYLOAD_NRV2B -uses CONFIG_COMPRESSED_PAYLOAD_LZMA -uses CONFIG_ROMBASE -uses CONFIG_XIP_ROM_SIZE -uses CONFIG_XIP_ROM_BASE -uses CONFIG_STACK_SIZE -uses CONFIG_HEAP_SIZE -uses CONFIG_USE_OPTION_TABLE -uses CONFIG_LB_CKS_RANGE_START -uses CONFIG_LB_CKS_RANGE_END -uses CONFIG_LB_CKS_LOC -uses CONFIG_MAINBOARD_PART_NUMBER -uses CONFIG_MAINBOARD_VENDOR -uses CONFIG_MAINBOARD -uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses COREBOOT_EXTRA_VERSION -uses CONFIG_RAMBASE -uses CONFIG_TTYS0_BAUD -uses CONFIG_TTYS0_BASE -uses CONFIG_TTYS0_LCS -uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL -uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL -uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL -uses CONFIG_CONSOLE_SERIAL8250 -uses CONFIG_HAVE_INIT_TIMER -uses CONFIG_GDB_STUB -uses CONFIG_CROSS_COMPILE -uses CC -uses HOSTCC -uses CONFIG_OBJCOPY -uses CONFIG_CONSOLE_VGA -uses CONFIG_PCI_ROM_RUN -uses CONFIG_HW_MEM_HOLE_SIZEK -uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC - -uses CONFIG_HT_CHAIN_UNITID_BASE -uses CONFIG_HT_CHAIN_END_UNITID_BASE -uses CONFIG_SB_HT_CHAIN_ON_BUS0 -uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY - -uses CONFIG_USE_DCACHE_RAM -uses CONFIG_DCACHE_RAM_BASE -uses CONFIG_DCACHE_RAM_SIZE -uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE -uses CONFIG_USE_INIT - -uses CONFIG_SERIAL_CPU_INIT - -uses CONFIG_ENABLE_APIC_EXT_ID -uses CONFIG_APIC_ID_OFFSET -uses CONFIG_LIFT_BSP_APIC_ID - -uses CONFIG_PCI_64BIT_PREF_MEM - -uses CONFIG_RAMTOP - -uses CONFIG_UNCOMPRESSED - -uses CONFIG_PCI_BUS_SEGN_BITS - -uses CONFIG_AP_CODE_IN_CAR - -uses CONFIG_MEM_TRAIN_SEQ - -uses CONFIG_WAIT_BEFORE_CPUS_INIT - -uses CONFIG_AMDMCT - -uses CONFIG_USE_PRINTK_IN_CAR -uses CONFIG_AMD_UCODE_PATCH_FILE -uses CONFIG_ID_SECTION_OFFSET - -### -### Build options -### - -## -## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. -## -default CONFIG_ROM_SIZE=1024*1024 - -## -## CONFIG_FALLBACK_SIZE is the amount of the ROM the ROM part of the fallback image will use -default CONFIG_FALLBACK_SIZE=CONFIG_ROM_IMAGE_SIZE -default CONFIG_FAILOVER_SIZE=0x02000 - -#more 1M for pgtbl -default CONFIG_RAMTOP=16384*1024 - -## -## Build code for the fallback boot -## -default CONFIG_HAVE_FALLBACK_BOOT=1 -default CONFIG_HAVE_FAILOVER_BOOT=1 - -## -## Build code to reset the motherboard from coreboot -## -default CONFIG_HAVE_HARD_RESET=1 - -## -## Build code to export a programmable irq routing table -## -default CONFIG_GENERATE_PIRQ_TABLE=1 -default CONFIG_IRQ_SLOT_COUNT=11 - -## -## Build code to export an x86 MP table -## Useful for specifying IRQ routing values -## -default CONFIG_GENERATE_MP_TABLE=1 - -## ACPI tables will be included -default CONFIG_GENERATE_ACPI_TABLES=0 - -## -## Build code to export a CMOS option table -## -default CONFIG_HAVE_OPTION_TABLE=1 - -## -## Move the default coreboot cmos range off of AMD RTC registers -## -default CONFIG_LB_CKS_RANGE_START=49 -default CONFIG_LB_CKS_RANGE_END=122 -default CONFIG_LB_CKS_LOC=123 - -## -## Build code for SMP support -## Only worry about 2 micro processors -## -default CONFIG_SMP=1 -default CONFIG_MAX_PHYSICAL_CPUS=2 -default CONFIG_MAX_CPUS=4 * CONFIG_MAX_PHYSICAL_CPUS -default CONFIG_LOGICAL_CPUS=1 - -default CONFIG_SERIAL_CPU_INIT=0 - -default CONFIG_ENABLE_APIC_EXT_ID=1 -default CONFIG_APIC_ID_OFFSET=0x00 -default CONFIG_LIFT_BSP_APIC_ID=1 - -#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead. -#2G -#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000 -#1G -default CONFIG_HW_MEM_HOLE_SIZEK=0x100000 -#512M -#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000 - -#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy -#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1 - -#VGA Console -default CONFIG_CONSOLE_VGA=1 -default CONFIG_PCI_ROM_RUN=1 - -#HT Unit ID offset, default is 1, the typical one, 0 mean only one HT device -default CONFIG_HT_CHAIN_UNITID_BASE=1 - -#real SB Unit ID, default is 0x20, mean dont touch it at last -#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6 - -#make the SB HT chain on bus 0, default is not (0) -default CONFIG_SB_HT_CHAIN_ON_BUS0=2 - -#only offset for SB chain?, default is yes(1) -default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 - -#allow capable device use that above 4G -#default CONFIG_PCI_64BIT_PREF_MEM=1 - -## -## enable CACHE_AS_RAM specifics -## -default CONFIG_USE_DCACHE_RAM=1 -default CONFIG_DCACHE_RAM_BASE=0xc4000 -default CONFIG_DCACHE_RAM_SIZE=0x0c000 -default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x04000 -default CONFIG_USE_INIT=0 - -default CONFIG_MEM_TRAIN_SEQ=2 -default CONFIG_WAIT_BEFORE_CPUS_INIT=0 -default CONFIG_AMDMCT = 1 - -## -## Build code to setup a generic IOAPIC -## -default CONFIG_IOAPIC=1 - -## -## Clean up the motherboard id strings -## -default CONFIG_MAINBOARD_PART_NUMBER="h8dmr (Fam10)" -default CONFIG_MAINBOARD_VENDOR="Supermicro" -default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15d9 -default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x1511 - -## -## Set microcode patch file name -## -## Barcelona rev Ax: "mc_patch_01000020.h" -## Barcelona rev B0, B1, BA: "mc_patch_01000084.h" -## Barcelona rev B2, B3: "mc_patch_01000083.h" -## Shanghai rev RB-C2: "mc_patch_01000086.h" -## Shanghai rev DA-C2: "mc_patch_0100009f.h" -## -#default CONFIG_AMD_UCODE_PATCH_FILE="mc_patch_01000086.h" -default CONFIG_AMD_UCODE_PATCH_FILE="mc_patch_0100009f.h" - -### -### coreboot layout values -### - -## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default CONFIG_ROM_IMAGE_SIZE = 0x1e000 - -## -## Use a 32K stack -## -default CONFIG_STACK_SIZE=0x8000 - -## -## Use a 48K heap -## -default CONFIG_HEAP_SIZE=0xc0000 - -## -## Only use the option table in a normal image -## -default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE ) - -## -## Coreboot C code runs at this location in RAM -## -default CONFIG_RAMBASE=0x00200000 - -## -## Load the payload from the ROM -## -default CONFIG_ROM_PAYLOAD = 1 - -#default CONFIG_COMPRESSED_PAYLOAD = 1 - -# CBFS will take care of payload compression -default CONFIG_UNCOMPRESSED = 1 - -### -### Defaults of options that you may want to override in the target config file -### - -## -## The default compiler -## -default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" - -## -## Disable the gdb stub by default -## -default CONFIG_GDB_STUB=0 - -## -## The Serial Console -## -default CONFIG_USE_PRINTK_IN_CAR=1 - -# To Enable the Serial Console -default CONFIG_CONSOLE_SERIAL8250=1 - -## Select the serial console baud rate -default CONFIG_TTYS0_BAUD=115200 -#default CONFIG_TTYS0_BAUD=57600 -#default CONFIG_TTYS0_BAUD=38400 -#default CONFIG_TTYS0_BAUD=19200 -#default CONFIG_TTYS0_BAUD=9600 -#default CONFIG_TTYS0_BAUD=4800 -#default CONFIG_TTYS0_BAUD=2400 -#default CONFIG_TTYS0_BAUD=1200 - -# Select the serial console base port -default CONFIG_TTYS0_BASE=0x3f8 - -# Select the serial protocol -# This defaults to 8 data bits, 1 stop bit, and no parity -default CONFIG_TTYS0_LCS=0x3 - -## -### Select the coreboot loglevel -## -## EMERG 1 system is unusable -## ALERT 2 action must be taken immediately -## CRIT 3 critical conditions -## ERR 4 error conditions -## WARNING 5 warning conditions -## NOTICE 6 normal but significant condition -## INFO 7 informational -## DEBUG 8 debug-level messages -## SPEW 9 Way too many details - -## Request this level of debugging output -default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 -## At a maximum only compile in this level of debugging -default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9 - -## -## Select power on after power fail setting -default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" - -default CONFIG_USE_FAILOVER_IMAGE=0 -default CONFIG_USE_FALLBACK_IMAGE=0 -default CONFIG_XIP_ROM_SIZE=CONFIG_FAILOVER_SIZE - -default CONFIG_ID_SECTION_OFFSET=0x80 -### End Options.lb -end diff --git a/src/mainboard/supermicro/h8qme_fam10/Config.lb b/src/mainboard/supermicro/h8qme_fam10/Config.lb deleted file mode 100644 index 863575b..0000000 --- a/src/mainboard/supermicro/h8qme_fam10/Config.lb +++ /dev/null @@ -1,347 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007 AMD -## Written by Yinghai Lu <yinghailu@amd.com> for AMD. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -## CONFIG_XIP_ROM_SIZE must be a power of 2. -# for testing with -O != s. FIXME -#default CONFIG_XIP_ROM_SIZE = 128 * 1024 -default CONFIG_XIP_ROM_SIZE = 128 * 1024 -include /config/failovercalculation.lb - -arch i386 end - -## -## Build the objects we have code for in this directory. -## - -driver mainboard.o -#needed by irq_tables and mptable and acpi_tables -object get_bus_conf.o - -if CONFIG_GENERATE_MP_TABLE object mptable.o end -if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end - - if CONFIG_USE_INIT - makerule ./auto.o - depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" - end - else - makerule ./auto.inc - depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" - action "perl -e 's/\.rodata/.rom.data/g' -pi $@" - action "perl -e 's/\.text/.section .rom.text/g' -pi $@" - end - end - -if CONFIG_USE_FAILOVER_IMAGE -else - if CONFIG_AP_CODE_IN_CAR - makerule ./apc_auto.o - depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@" - end - end -end - - -## -## Build our 16 bit and 32 bit coreboot entry code -## -if CONFIG_HAVE_FAILOVER_BOOT - if CONFIG_USE_FAILOVER_IMAGE - mainboardinit cpu/x86/16bit/entry16.inc - ldscript /cpu/x86/16bit/entry16.lds - end -else - if CONFIG_USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/entry16.inc - ldscript /cpu/x86/16bit/entry16.lds - end -end - -mainboardinit cpu/x86/32bit/entry32.inc - - if CONFIG_USE_INIT - ldscript /cpu/x86/32bit/entry32.lds - end - - if CONFIG_USE_INIT - ldscript /cpu/amd/car/cache_as_ram.lds - end - -## -## Build our reset vector (This is where coreboot is entered) -## -if CONFIG_HAVE_FAILOVER_BOOT - if CONFIG_USE_FAILOVER_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds - else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds - end -else - if CONFIG_USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds - else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds - end -end - -## -## Include an id string (For safe flashing) -## -mainboardinit arch/i386/lib/id.inc -ldscript /arch/i386/lib/id.lds - -## -## ROMSTRAP table for MCP55 -## -if CONFIG_HAVE_FAILOVER_BOOT - if CONFIG_USE_FAILOVER_IMAGE - mainboardinit southbridge/nvidia/mcp55/romstrap.inc - ldscript /southbridge/nvidia/mcp55/romstrap.lds - end -else - if CONFIG_USE_FALLBACK_IMAGE - mainboardinit southbridge/nvidia/mcp55/romstrap.inc - ldscript /southbridge/nvidia/mcp55/romstrap.lds - end -end - - ## - ## Setup Cache-As-Ram - ## - mainboardinit cpu/amd/car/cache_as_ram.inc - -### -### This is the early phase of coreboot startup -### Things are delicate and we test to see if we should -### failover to another image. -### -if CONFIG_HAVE_FAILOVER_BOOT - if CONFIG_USE_FAILOVER_IMAGE - ldscript /arch/i386/lib/failover_failover.lds - end -else - if CONFIG_USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds - end -end - -## -## Setup RAM -## - if CONFIG_USE_INIT - initobject auto.o - else - mainboardinit ./auto.inc - end - -## -## Include the secondary Configuration files -## -config chip.h - -dir /southbridge/nvidia/mcp55 -dir /southbridge/amd/amd8132 - -chip northbridge/amd/amdfam10/root_complex - device apic_cluster 0 on - chip cpu/amd/socket_F_1207 - device apic 0 on end - end - end - device pci_domain 0 on - chip northbridge/amd/amdfam10 #mc0 - device pci 18.0 on end - device pci 18.0 on end - device pci 18.0 on - # SB on link 2.0 - chip southbridge/nvidia/mcp55 - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627hf - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # SFI - io 0x62 = 0x100 - end - device pnp 2e.7 off # GPIO_GAME_MIDI - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # WDTO_PLED - device pnp 2e.9 off end # GPIO_SUSLED - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on # SM 0 - # chip drivers/generic/generic #dimm 0-0-0 - # device i2c 50 on end - # end - # chip drivers/generic/generic #dimm 0-0-1 - # device i2c 51 on end - # end - # chip drivers/generic/generic #dimm 0-1-0 - # device i2c 52 on end - # end - # chip drivers/generic/generic #dimm 0-1-1 - # device i2c 53 on end - # end - # chip drivers/generic/generic #dimm 1-0-0 - # device i2c 54 on end - # end - # chip drivers/generic/generic #dimm 1-0-1 - # device i2c 55 on end - # end - # chip drivers/generic/generic #dimm 1-1-0 - # device i2c 56 on end - # end - # chip drivers/generic/generic #dimm 1-1-1 - # device i2c 57 on end - # end - # chip drivers/generic/generic #dimm 2-0-0 - # device i2c 58 on end - # end - # chip drivers/generic/generic #dimm 2-0-1 - # device i2c 59 on end - # end - # chip drivers/generic/generic #dimm 2-1-0 - # device i2c 5a on end - # end - # chip drivers/generic/generic #dimm 2-1-1 - # device i2c 5b on end - # end - # chip drivers/generic/generic #dimm 3-0-0 - # device i2c 5c on end - # end - # chip drivers/generic/generic #dimm 3-0-1 - # device i2c 5d on end - # end - # chip drivers/generic/generic #dimm 3-1-0 - # device i2c 5e on end - # end - # chip drivers/generic/generic #dimm 3-1-1 - # device i2c 5f on end - # end - - end # SM - device pci 1.1 on # SM 1 -#PCI device smbus address will diepend on addon pci device, do we need to scan_smbus_bus? -# - chip drivers/generic/generic #MAC EEPROM - device i2c 51 on end - end - - end # SM - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.1 off end # AZA - device pci 7.0 on - device pci 1.0 on end - end - device pci 8.0 off end - device pci 9.0 off end - device pci a.0 on end # PCI E 5 - device pci b.0 on end # PCI E 4 - device pci c.0 on end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 on end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_addr" = "0x51" - end - end # device pci 18.0 - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 19.0 on end - device pci 19.0 on end - device pci 19.0 on - chip southbridge/amd/amd8132 - device pci 0.0 on end - device pci 0.1 on end - device pci 1.0 on - device pci 3.0 on end - device pci 3.1 on end - end - device pci 1.1 on end - end #amd8132 - end #device pci 19.0 - device pci 19.1 on end - device pci 19.2 on end - device pci 19.3 on end - device pci 19.4 on end - end # mc0 - - end # PCI domain - -# chip drivers/generic/debug -# device pnp 0.0 off end # chip name -# device pnp 0.1 on end # pci_regs_all -# device pnp 0.2 off end # mem -# device pnp 0.3 off end # cpuid -# device pnp 0.4 on end # smbus_regs_all -# device pnp 0.5 off end # dual core msr -# device pnp 0.6 off end # cache size -# device pnp 0.7 off end # tsc -# device pnp 0.8 off end # io -# device pnp 0.9 on end # io -# end -end #root_complex diff --git a/src/mainboard/supermicro/h8qme_fam10/Options.lb b/src/mainboard/supermicro/h8qme_fam10/Options.lb deleted file mode 100644 index 279d8ac..0000000 --- a/src/mainboard/supermicro/h8qme_fam10/Options.lb +++ /dev/null @@ -1,373 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007 AMD -## Written by Yinghai Lu <yinghailu@amd.com> for AMD. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -uses CONFIG_GENERATE_MP_TABLE -uses CONFIG_GENERATE_PIRQ_TABLE -uses CONFIG_GENERATE_ACPI_TABLES -uses CONFIG_HAVE_ACPI_RESUME -uses CONFIG_ACPI_SSDTX_NUM -uses CONFIG_USE_FALLBACK_IMAGE -uses CONFIG_USE_FAILOVER_IMAGE -uses CONFIG_HAVE_FALLBACK_BOOT -uses CONFIG_HAVE_FAILOVER_BOOT -uses CONFIG_HAVE_HARD_RESET -uses CONFIG_IRQ_SLOT_COUNT -uses CONFIG_HAVE_OPTION_TABLE -uses CONFIG_MAX_CPUS -uses CONFIG_MAX_PHYSICAL_CPUS -uses CONFIG_LOGICAL_CPUS -uses CONFIG_IOAPIC -uses CONFIG_SMP -uses CONFIG_FALLBACK_SIZE -uses CONFIG_FAILOVER_SIZE -uses CONFIG_ROM_SIZE -uses CONFIG_ROM_SECTION_SIZE -uses CONFIG_ROM_IMAGE_SIZE -uses CONFIG_ROM_SECTION_SIZE -uses CONFIG_ROM_SECTION_OFFSET -uses CONFIG_ROM_PAYLOAD -uses CONFIG_COMPRESSED_PAYLOAD_NRV2B -uses CONFIG_COMPRESSED_PAYLOAD_LZMA -uses CONFIG_ROMBASE -uses CONFIG_XIP_ROM_SIZE -uses CONFIG_XIP_ROM_BASE -uses CONFIG_STACK_SIZE -uses CONFIG_HEAP_SIZE -uses CONFIG_USE_OPTION_TABLE -uses CONFIG_LB_CKS_RANGE_START -uses CONFIG_LB_CKS_RANGE_END -uses CONFIG_LB_CKS_LOC -uses CONFIG_MAINBOARD_PART_NUMBER -uses CONFIG_MAINBOARD_VENDOR -uses CONFIG_MAINBOARD -uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses COREBOOT_EXTRA_VERSION -uses CONFIG_RAMBASE -uses CONFIG_TTYS0_BAUD -uses CONFIG_TTYS0_BASE -uses CONFIG_TTYS0_LCS -uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL -uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL -uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL -uses CONFIG_CONSOLE_SERIAL8250 -uses CONFIG_HAVE_INIT_TIMER -uses CONFIG_GDB_STUB -uses CONFIG_CROSS_COMPILE -uses CC -uses HOSTCC -uses CONFIG_OBJCOPY -uses CONFIG_VGA -uses CONFIG_CONSOLE_VGA -uses CONFIG_VGA_ROM_RUN -uses CONFIG_PCI_ROM_RUN -uses CONFIG_HW_MEM_HOLE_SIZEK -uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC - -uses CONFIG_HT_CHAIN_UNITID_BASE -uses CONFIG_HT_CHAIN_END_UNITID_BASE -uses CONFIG_SB_HT_CHAIN_ON_BUS0 -uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY - -uses CONFIG_USE_DCACHE_RAM -uses CONFIG_DCACHE_RAM_BASE -uses CONFIG_DCACHE_RAM_SIZE -uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE -uses CONFIG_USE_INIT - -uses CONFIG_SERIAL_CPU_INIT - -uses CONFIG_ENABLE_APIC_EXT_ID -uses CONFIG_APIC_ID_OFFSET -uses CONFIG_LIFT_BSP_APIC_ID - -uses CONFIG_PCI_64BIT_PREF_MEM - -uses CONFIG_RAMTOP - -uses CONFIG_UNCOMPRESSED - -uses CONFIG_PCI_BUS_SEGN_BITS - -uses CONFIG_AP_CODE_IN_CAR - -uses CONFIG_MEM_TRAIN_SEQ - -uses CONFIG_WAIT_BEFORE_CPUS_INIT - -uses CONFIG_AMDMCT - -uses CONFIG_USE_PRINTK_IN_CAR -uses CONFIG_AMD_UCODE_PATCH_FILE -uses CONFIG_ID_SECTION_OFFSET - -uses CONFIG_PIRQ_ROUTE - -default CONFIG_PIRQ_ROUTE = 1 - - -### -### Build options -### - -## -## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. -## -default CONFIG_ROM_SIZE=1024*1024 - -## -## CONFIG_FALLBACK_SIZE is the amount of the ROM the ROM part of the fallback image will use -default CONFIG_FALLBACK_SIZE=CONFIG_ROM_IMAGE_SIZE -default CONFIG_FAILOVER_SIZE=0x02000 - -#more 1M for pgtbl -default CONFIG_RAMTOP=16384*1024 -#default CONFIG_RAMTOP=16384*8192 - -## -## Build code for the fallback boot -## -default CONFIG_HAVE_FALLBACK_BOOT=1 -default CONFIG_HAVE_FAILOVER_BOOT=1 - -## -## Build code to reset the motherboard from coreboot -## -default CONFIG_HAVE_HARD_RESET=1 - -## -## Build code to export a programmable irq routing table -## -default CONFIG_GENERATE_PIRQ_TABLE=1 -default CONFIG_IRQ_SLOT_COUNT=11 - -## -## Build code to export an x86 MP table -## Useful for specifying IRQ routing values -## -default CONFIG_GENERATE_MP_TABLE=1 - -## ACPI tables will be included -default CONFIG_GENERATE_ACPI_TABLES=0 - -## -## Build code to export a CMOS option table -## -default CONFIG_HAVE_OPTION_TABLE=1 - -## -## Move the default coreboot cmos range off of AMD RTC registers -## -default CONFIG_LB_CKS_RANGE_START=49 -default CONFIG_LB_CKS_RANGE_END=122 -default CONFIG_LB_CKS_LOC=123 - -## -## Build code for SMP support -## Only worry about 2 micro processors -## -default CONFIG_SMP=1 -default CONFIG_MAX_PHYSICAL_CPUS=4 -default CONFIG_MAX_CPUS=4 * CONFIG_MAX_PHYSICAL_CPUS -default CONFIG_LOGICAL_CPUS=1 - -default CONFIG_SERIAL_CPU_INIT=1 - -default CONFIG_ENABLE_APIC_EXT_ID=1 -default CONFIG_APIC_ID_OFFSET=0x00 -default CONFIG_LIFT_BSP_APIC_ID=1 - -#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead. -#2G -#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000 -#1G -default CONFIG_HW_MEM_HOLE_SIZEK=0x100000 -#512M -#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000 - -#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy -#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1 - -#VGA Console -default CONFIG_VGA=0 -default CONFIG_CONSOLE_VGA=1 -default CONFIG_VGA_ROM_RUN=1 -default CONFIG_PCI_ROM_RUN=0 - -#HT Unit ID offset, default is 1, the typical one, 0 mean only one HT device -default CONFIG_HT_CHAIN_UNITID_BASE=1 - -#real SB Unit ID, default is 0x20, mean dont touch it at last -#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6 - -#make the SB HT chain on bus 0, default is not (0) -default CONFIG_SB_HT_CHAIN_ON_BUS0=2 - -#only offset for SB chain?, default is yes(1) -default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 - -#allow capable device use that above 4G -#default CONFIG_PCI_64BIT_PREF_MEM=1 - -## -## enable CACHE_AS_RAM specifics -## -default CONFIG_USE_DCACHE_RAM=1 -default CONFIG_DCACHE_RAM_BASE=0xc4000 -default CONFIG_DCACHE_RAM_SIZE=0x0c000 -default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x04000 -default CONFIG_USE_INIT=0 - -default CONFIG_MEM_TRAIN_SEQ=2 -default CONFIG_WAIT_BEFORE_CPUS_INIT=0 -default CONFIG_AMDMCT = 1 - -## -## Build code to setup a generic IOAPIC -## -default CONFIG_IOAPIC=1 - -## -## Clean up the motherboard id strings -## -default CONFIG_MAINBOARD_PART_NUMBER="h8qme (Fam10)" -default CONFIG_MAINBOARD_VENDOR="Supermicro" -default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15d9 -default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x1511 - -## -## Set microcode patch file name -## -## Barcelona rev Ax: "mc_patch_01000020.h" -## Barcelona rev B0, B1, BA: "mc_patch_01000084.h" -## Barcelona rev B2, B3: "mc_patch_01000083.h" -## Shanghai rev RB-C2: "mc_patch_01000086.h" -## Shanghai rev DA-C2: "mc_patch_0100009f.h" -## -#default CONFIG_AMD_UCODE_PATCH_FILE="mc_patch_01000086.h" -default CONFIG_AMD_UCODE_PATCH_FILE="mc_patch_0100009f.h" - -### -### coreboot layout values -### - -## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default CONFIG_ROM_IMAGE_SIZE = 0x1e000 - -## -## Use a 64K stack -## -default CONFIG_STACK_SIZE=0x10000 - -## -## Use a 48K heap -## -default CONFIG_HEAP_SIZE=0xc000 - -## -## Only use the option table in a normal image -## -default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE ) - -## -## Coreboot C code runs at this location in RAM -## -default CONFIG_RAMBASE=0x00200000 - -## -## Load the payload from the ROM -## -default CONFIG_ROM_PAYLOAD = 1 - -#default CONFIG_COMPRESSED_PAYLOAD = 1 - -# CBFS will take care of payload compression -default CONFIG_UNCOMPRESSED = 1 - -### -### Defaults of options that you may want to override in the target config file -### - -## -## The default compiler -## -default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" - -## -## Disable the gdb stub by default -## -default CONFIG_GDB_STUB=0 - -## -## The Serial Console -## -default CONFIG_USE_PRINTK_IN_CAR=1 - -# To Enable the Serial Console -default CONFIG_CONSOLE_SERIAL8250=1 - -## Select the serial console baud rate -#default CONFIG_TTYS0_BAUD=115200 -#default CONFIG_TTYS0_BAUD=57600 -#default CONFIG_TTYS0_BAUD=38400 -default CONFIG_TTYS0_BAUD=19200 -#default CONFIG_TTYS0_BAUD=9600 -#default CONFIG_TTYS0_BAUD=4800 -#default CONFIG_TTYS0_BAUD=2400 -#default CONFIG_TTYS0_BAUD=1200 - -# Select the serial console base port -default CONFIG_TTYS0_BASE=0x3f8 - -# Select the serial protocol -# This defaults to 8 data bits, 1 stop bit, and no parity -default CONFIG_TTYS0_LCS=0x3 - -## -### Select the coreboot loglevel -## -## EMERG 1 system is unusable -## ALERT 2 action must be taken immediately -## CRIT 3 critical conditions -## ERR 4 error conditions -## WARNING 5 warning conditions -## NOTICE 6 normal but significant condition -## INFO 7 informational -## DEBUG 8 debug-level messages -## SPEW 9 Way too many details - -## Request this level of debugging output -default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=5 -## At a maximum only compile in this level of debugging -default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=5 - -## -## Select power on after power fail setting -default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" - -default CONFIG_USE_FAILOVER_IMAGE=0 -default CONFIG_USE_FALLBACK_IMAGE=0 -default CONFIG_XIP_ROM_SIZE=CONFIG_FAILOVER_SIZE - -default CONFIG_ID_SECTION_OFFSET=0x80 -### End Options.lb -end diff --git a/src/mainboard/supermicro/x6dai_g/Config.lb b/src/mainboard/supermicro/x6dai_g/Config.lb deleted file mode 100644 index 17096f5..0000000 --- a/src/mainboard/supermicro/x6dai_g/Config.lb +++ /dev/null @@ -1,167 +0,0 @@ -## -## Only use the option table in a normal image -## -default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE - -## CONFIG_XIP_ROM_SIZE must be a power of 2. -default CONFIG_XIP_ROM_SIZE = 64 * 1024 -include /config/nofailovercalculation.lb - -## -## Set all of the defaults for an x86 architecture -## - -arch i386 end - -## -## Build the objects we have code for in this directory. -## - -driver mainboard.o -if CONFIG_GENERATE_MP_TABLE object mptable.o end -if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end -if CONFIG_HAVE_HARD_RESET object reset.o end - -## -## Romcc output -## -makerule ./failover.E - depends "$(CONFIG_MAINBOARD)/failover.c ../romcc" - action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@" -end - -makerule ./failover.inc - depends "$(CONFIG_MAINBOARD)/failover.c ../romcc" - action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@" -end - -makerule ./auto.E - depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -E -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@" -end -makerule ./auto.inc - depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@" -end - -## -## Build our 16 bit and 32 bit coreboot entry code -## -mainboardinit cpu/x86/16bit/entry16.inc -mainboardinit cpu/x86/32bit/entry32.inc -ldscript /cpu/x86/16bit/entry16.lds -ldscript /cpu/x86/32bit/entry32.lds - -## -## Build our reset vector (This is where coreboot is entered) -## -if CONFIG_USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds -else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds -end - -### Should this be in the northbridge code? -mainboardinit arch/i386/lib/cpu_reset.inc - -## -## Include an id string (For safe flashing) -## -mainboardinit arch/i386/lib/id.inc -ldscript /arch/i386/lib/id.lds - -### -### This is the early phase of coreboot startup -### Things are delicate and we test to see if we should -### failover to another image. -### -if CONFIG_USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc -end - -### -### O.k. We aren't just an intermediary anymore! -### - -## -## Setup RAM -## -mainboardinit cpu/x86/fpu_enable.inc -mainboardinit cpu/x86/sse_enable.inc -mainboardinit ./auto.inc -mainboardinit cpu/x86/sse_disable.inc -mainboardinit cpu/x86/mmx_disable.inc - -## -## Include the secondary Configuration files -## -dir /pc80 -config chip.h - -chip northbridge/intel/e7525 # mch - device pci_domain 0 on - chip southbridge/intel/esb6300 # esb6300 - register "pirq_a_d" = "0x0b0a0a05" - register "pirq_e_h" = "0x0a0b0c80" - - device pci 1c.0 on end - - device pci 1d.0 on end - device pci 1d.1 on end - device pci 1d.4 on end - device pci 1d.5 on end - device pci 1d.7 on end - - device pci 1e.0 on end - - device pci 1f.0 on - chip superio/winbond/w83627hf - device pnp 2e.0 off end - device pnp 2e.1 off end - device pnp 2e.2 on - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.4 off end - device pnp 2e.5 off end - device pnp 2e.6 off end - device pnp 2e.7 off end - device pnp 2e.9 off end - device pnp 2e.a on end - device pnp 2e.b off end - device pnp 2e.f off end - device pnp 2e.10 off end - device pnp 2e.14 off end - end - end - device pci 1f.1 on end - device pci 1f.2 on end - device pci 1f.3 on end - device pci 1f.5 off end - device pci 1f.6 on end - end - device pci 00.0 on end - device pci 00.1 on end - device pci 00.2 on end - device pci 02.0 on end - device pci 03.0 on end - device pci 04.0 on end - device pci 08.0 on end - end - device apic_cluster 0 on - chip cpu/intel/socket_mPGA604 # cpu0 - device apic 0 on end - end - chip cpu/intel/socket_mPGA604 # cpu1 - device apic 6 on end - end - end -end - diff --git a/src/mainboard/supermicro/x6dai_g/Options.lb b/src/mainboard/supermicro/x6dai_g/Options.lb deleted file mode 100644 index 626f0be..0000000 --- a/src/mainboard/supermicro/x6dai_g/Options.lb +++ /dev/null @@ -1,228 +0,0 @@ -uses CONFIG_GENERATE_MP_TABLE -uses CONFIG_GENERATE_PIRQ_TABLE -uses CONFIG_USE_FALLBACK_IMAGE -uses CONFIG_HAVE_FALLBACK_BOOT -uses CONFIG_HAVE_HARD_RESET -uses CONFIG_IRQ_SLOT_COUNT -uses CONFIG_HAVE_OPTION_TABLE -uses CONFIG_LOGICAL_CPUS -uses CONFIG_MAX_CPUS -uses CONFIG_IOAPIC -uses CONFIG_SMP -uses CONFIG_FALLBACK_SIZE -uses CONFIG_ROM_SIZE -uses CONFIG_ROM_SECTION_SIZE -uses CONFIG_ROM_IMAGE_SIZE -uses CONFIG_ROM_SECTION_SIZE -uses CONFIG_ROM_SECTION_OFFSET -uses CONFIG_ROM_PAYLOAD -uses CONFIG_COMPRESSED_PAYLOAD_LZMA -uses CONFIG_PRECOMPRESSED_PAYLOAD -uses CONFIG_ROMBASE -uses CONFIG_XIP_ROM_SIZE -uses CONFIG_XIP_ROM_BASE -uses CONFIG_STACK_SIZE -uses CONFIG_HEAP_SIZE -uses CONFIG_USE_OPTION_TABLE -uses CONFIG_LB_CKS_RANGE_START -uses CONFIG_LB_CKS_RANGE_END -uses CONFIG_LB_CKS_LOC -uses CONFIG_MAINBOARD -uses CONFIG_MAINBOARD_PART_NUMBER -uses CONFIG_MAINBOARD_VENDOR -uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses COREBOOT_EXTRA_VERSION -uses CONFIG_UDELAY_TSC -uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 -uses CONFIG_RAMBASE -uses CONFIG_GDB_STUB -uses CONFIG_CONSOLE_SERIAL8250 -uses CONFIG_TTYS0_BAUD -uses CONFIG_TTYS0_BASE -uses CONFIG_TTYS0_LCS -uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL -uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL -uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL -uses CONFIG_CONSOLE_BTEXT -uses CC -uses HOSTCC -uses CONFIG_CROSS_COMPILE -uses CONFIG_OBJCOPY - - -### -### Build options -### - -## -## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. -## -default CONFIG_ROM_SIZE=1048576 - -## -## Build code for the fallback boot -## -default CONFIG_HAVE_FALLBACK_BOOT=1 - -## -## Delay timer options -## Use timer2 -## -default CONFIG_UDELAY_TSC=1 -default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 - -## -## Build code to reset the motherboard from coreboot -## -default CONFIG_HAVE_HARD_RESET=1 - -## -## Build code to export a programmable irq routing table -## -default CONFIG_GENERATE_PIRQ_TABLE=1 -default CONFIG_IRQ_SLOT_COUNT=15 - -## -## Build code to export an x86 MP table -## Useful for specifying IRQ routing values -## -default CONFIG_GENERATE_MP_TABLE=1 - -## -## Build code to export a CMOS option table -## -default CONFIG_HAVE_OPTION_TABLE=1 - -## -## Move the default coreboot cmos range off of AMD RTC registers -## -default CONFIG_LB_CKS_RANGE_START=49 -default CONFIG_LB_CKS_RANGE_END=122 -default CONFIG_LB_CKS_LOC=123 - -## -## Build code for SMP support -## Only worry about 2 micro processors -## -default CONFIG_SMP=1 -default CONFIG_MAX_CPUS=4 -default CONFIG_LOGICAL_CPUS=0 - -## -## Build code to setup a generic IOAPIC -## -default CONFIG_IOAPIC=1 - -## -## Clean up the motherboard id strings -## -default CONFIG_MAINBOARD_PART_NUMBER="X6DAI" -default CONFIG_MAINBOARD_VENDOR= "Supermicro" -default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15D9 -default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x6780 - -### -### coreboot layout values -### - -## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default CONFIG_ROM_IMAGE_SIZE = 65536 - -## -## Use a small 8K stack -## -default CONFIG_STACK_SIZE=0x2000 - -## -## Use a small 32K heap -## -default CONFIG_HEAP_SIZE=0x8000 - - -### -### Compute the location and size of where this firmware image -### (coreboot plus bootloader) will live in the boot rom chip. -### -default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE - -## -## Coreboot C code runs at this location in RAM -## -default CONFIG_RAMBASE=0x00004000 - -## -## Load the payload from the ROM -## -default CONFIG_ROM_PAYLOAD=1 - - -### -### Defaults of options that you may want to override in the target config file -### - -## -## The default compiler -## -default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" - -## -## Disable the gdb stub by default -## -default CONFIG_GDB_STUB=0 - -## -## The Serial Console -## - -# To Enable the Serial Console -default CONFIG_CONSOLE_SERIAL8250=1 - -## Select the serial console baud rate -default CONFIG_TTYS0_BAUD=115200 -#default CONFIG_TTYS0_BAUD=57600 -#default CONFIG_TTYS0_BAUD=38400 -#default CONFIG_TTYS0_BAUD=19200 -#default CONFIG_TTYS0_BAUD=9600 -#default CONFIG_TTYS0_BAUD=4800 -#default CONFIG_TTYS0_BAUD=2400 -#default CONFIG_TTYS0_BAUD=1200 - -# Select the serial console base port -default CONFIG_TTYS0_BASE=0x3f8 - -# Select the serial protocol -# This defaults to 8 data bits, 1 stop bit, and no parity -default CONFIG_TTYS0_LCS=0x3 - -## -### Select the coreboot loglevel -## -## EMERG 1 system is unusable -## ALERT 2 action must be taken immediately -## CRIT 3 critical conditions -## ERR 4 error conditions -## WARNING 5 warning conditions -## NOTICE 6 normal but significant condition -## INFO 7 informational -## CONFIG_DEBUG 8 debug-level messages -## SPEW 9 Way too many details - -## Request this level of debugging output -default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 -## At a maximum only compile in this level of debugging -default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 - -## -## Select power on after power fail setting -default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" - -## -## Don't enable the btext console -## -default CONFIG_CONSOLE_BTEXT=0 - - -### End Options.lb -end diff --git a/src/mainboard/supermicro/x6dhe_g/Config.lb b/src/mainboard/supermicro/x6dhe_g/Config.lb deleted file mode 100644 index 866042b..0000000 --- a/src/mainboard/supermicro/x6dhe_g/Config.lb +++ /dev/null @@ -1,190 +0,0 @@ -## -## Only use the option table in a normal image -## -default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE - -## CONFIG_XIP_ROM_SIZE must be a power of 2. -default CONFIG_XIP_ROM_SIZE = 64 * 1024 -include /config/nofailovercalculation.lb - -## Set all of the defaults for an x86 architecture -## - -arch i386 end - -## -## Build the objects we have code for in this directory. -## - -driver mainboard.o -if CONFIG_GENERATE_MP_TABLE object mptable.o end -if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end -if CONFIG_HAVE_HARD_RESET object reset.o end - -## -## Romcc output -## -makerule ./failover.E - depends "$(CONFIG_MAINBOARD)/failover.c ../romcc" - action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@" -end - -makerule ./failover.inc - depends "$(CONFIG_MAINBOARD)/failover.c ../romcc" - action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@" -end - -makerule ./auto.E - depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -E -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@" -end - -makerule ./auto.inc - depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@" -end - -## -## Build our 16 bit and 32 bit coreboot entry code -## -mainboardinit cpu/x86/16bit/entry16.inc -mainboardinit cpu/x86/32bit/entry32.inc -ldscript /cpu/x86/16bit/entry16.lds -ldscript /cpu/x86/32bit/entry32.lds - -## -## Build our reset vector (This is where coreboot is entered) -## -if CONFIG_USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds -else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds -end - -### Should this be in the northbridge code? -mainboardinit arch/i386/lib/cpu_reset.inc - -## -## Include an id string (For safe flashing) -## -mainboardinit arch/i386/lib/id.inc -ldscript /arch/i386/lib/id.lds - -### -### This is the early phase of coreboot startup -### Things are delicate and we test to see if we should -### failover to another image. -### -if CONFIG_USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc -end - -### -### O.k. We aren't just an intermediary anymore! -### - -## -## Setup RAM -## -mainboardinit cpu/x86/fpu_enable.inc -mainboardinit cpu/x86/sse_enable.inc -mainboardinit ./auto.inc -mainboardinit cpu/x86/sse_disable.inc -mainboardinit cpu/x86/mmx_disable.inc - - -## -## Include the secondary Configuration files -## -dir /pc80 -config chip.h - -chip northbridge/intel/e7520 # MCH - chip drivers/generic/debug # DEBUGGING - device pnp 00.0 on end - device pnp 00.1 off end - device pnp 00.2 off end - device pnp 00.3 off end - end - device pci_domain 0 on - chip southbridge/intel/esb6300 # ESB6300 - register "pirq_a_d" = "0x0b070a05" - register "pirq_e_h" = "0x0a808080" - - device pci 1c.0 on - chip drivers/generic/generic - device pci 01.0 on end # onboard gige1 - device pci 02.0 on end # onboard gige2 - end - end - - # USB ports - device pci 1d.0 on end - device pci 1d.1 on end - device pci 1d.4 on end # Southbridge Watchdog timer - device pci 1d.5 on end # Southbridge I/O apic1 - device pci 1d.7 on end - - # VGA / PCI 32-bit - device pci 1e.0 on - chip drivers/generic/generic - device pci 01.0 on end - end - end - - - device pci 1f.0 on # ISA bridge - chip superio/winbond/w83627hf - device pnp 2e.0 off end - device pnp 2e.2 on - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.4 off end - device pnp 2e.5 off end - device pnp 2e.6 off end - device pnp 2e.7 off end - device pnp 2e.9 off end - device pnp 2e.a on end - device pnp 2e.b off end - end - end - device pci 1f.1 on end - device pci 1f.2 off end - device pci 1f.3 on end # SMBus - device pci 1f.5 off end - device pci 1f.6 off end - end - - device pci 00.0 on end # Northbridge - device pci 00.1 on end # Northbridge Error reporting - device pci 01.0 on end - device pci 02.0 on - chip southbridge/intel/pxhd # PXHD 6700 - device pci 00.0 on end # bridge - device pci 00.1 on end # I/O apic - device pci 00.2 on end # bridge - device pci 00.3 on end # I/O apic - end - end -# device register "intrline" = "0x00070105" - device pci 04.0 on end - device pci 06.0 on end - end - - device apic_cluster 0 on - chip cpu/intel/socket_mPGA604 # CPU 0 - device apic 0 on end - end - chip cpu/intel/socket_mPGA604 # CPU 1 - device apic 6 on end - end - end -end diff --git a/src/mainboard/supermicro/x6dhe_g/Options.lb b/src/mainboard/supermicro/x6dhe_g/Options.lb deleted file mode 100644 index 87be848..0000000 --- a/src/mainboard/supermicro/x6dhe_g/Options.lb +++ /dev/null @@ -1,228 +0,0 @@ -uses CONFIG_GENERATE_MP_TABLE -uses CONFIG_GENERATE_PIRQ_TABLE -uses CONFIG_USE_FALLBACK_IMAGE -uses CONFIG_HAVE_FALLBACK_BOOT -uses CONFIG_HAVE_HARD_RESET -uses CONFIG_IRQ_SLOT_COUNT -uses CONFIG_HAVE_OPTION_TABLE -uses CONFIG_LOGICAL_CPUS -uses CONFIG_MAX_CPUS -uses CONFIG_IOAPIC -uses CONFIG_SMP -uses CONFIG_FALLBACK_SIZE -uses CONFIG_ROM_SIZE -uses CONFIG_ROM_SECTION_SIZE -uses CONFIG_ROM_IMAGE_SIZE -uses CONFIG_ROM_SECTION_SIZE -uses CONFIG_ROM_SECTION_OFFSET -uses CONFIG_ROM_PAYLOAD -uses CONFIG_COMPRESSED_PAYLOAD_LZMA -uses CONFIG_PRECOMPRESSED_PAYLOAD -uses CONFIG_ROMBASE -uses CONFIG_XIP_ROM_SIZE -uses CONFIG_XIP_ROM_BASE -uses CONFIG_STACK_SIZE -uses CONFIG_HEAP_SIZE -uses CONFIG_USE_OPTION_TABLE -uses CONFIG_LB_CKS_RANGE_START -uses CONFIG_LB_CKS_RANGE_END -uses CONFIG_LB_CKS_LOC -uses CONFIG_MAINBOARD -uses CONFIG_MAINBOARD_PART_NUMBER -uses CONFIG_MAINBOARD_VENDOR -uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses COREBOOT_EXTRA_VERSION -uses CONFIG_UDELAY_TSC -uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 -uses CONFIG_RAMBASE -uses CONFIG_GDB_STUB -uses CONFIG_CONSOLE_SERIAL8250 -uses CONFIG_TTYS0_BAUD -uses CONFIG_TTYS0_BASE -uses CONFIG_TTYS0_LCS -uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL -uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL -uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL -uses CONFIG_CONSOLE_BTEXT -uses CC -uses HOSTCC -uses CONFIG_CROSS_COMPILE -uses CONFIG_OBJCOPY - - -### -### Build options -### - -## -## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. -## -default CONFIG_ROM_SIZE=1048576 - -## -## Build code for the fallback boot -## -default CONFIG_HAVE_FALLBACK_BOOT=1 - -## -## Delay timer options -## Use timer2 -## -default CONFIG_UDELAY_TSC=1 -default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 - -## -## Build code to reset the motherboard from coreboot -## -default CONFIG_HAVE_HARD_RESET=1 - -## -## Build code to export a programmable irq routing table -## -default CONFIG_GENERATE_PIRQ_TABLE=1 -default CONFIG_IRQ_SLOT_COUNT=15 - -## -## Build code to export an x86 MP table -## Useful for specifying IRQ routing values -## -default CONFIG_GENERATE_MP_TABLE=1 - -## -## Build code to export a CMOS option table -## -default CONFIG_HAVE_OPTION_TABLE=1 - -## -## Move the default coreboot cmos range off of AMD RTC registers -## -default CONFIG_LB_CKS_RANGE_START=49 -default CONFIG_LB_CKS_RANGE_END=122 -default CONFIG_LB_CKS_LOC=123 - -## -## Build code for SMP support -## Only worry about 2 micro processors -## -default CONFIG_SMP=1 -default CONFIG_MAX_CPUS=4 -default CONFIG_LOGICAL_CPUS=0 - -## -## Build code to setup a generic IOAPIC -## -default CONFIG_IOAPIC=1 - -## -## Clean up the motherboard id strings -## -default CONFIG_MAINBOARD_PART_NUMBER="X6DHE_g" -default CONFIG_MAINBOARD_VENDOR= "Supermicro" -default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15D9 -default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x6080 - -### -### coreboot layout values -### - -## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default CONFIG_ROM_IMAGE_SIZE = 65536 - -## -## Use a small 8K stack -## -default CONFIG_STACK_SIZE=0x2000 - -## -## Use a small 32K heap -## -default CONFIG_HEAP_SIZE=0x8000 - - -### -### Compute the location and size of where this firmware image -### (coreboot plus bootloader) will live in the boot rom chip. -### -default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE - -## -## Coreboot C code runs at this location in RAM -## -default CONFIG_RAMBASE=0x00004000 - -## -## Load the payload from the ROM -## -default CONFIG_ROM_PAYLOAD=1 - - -### -### Defaults of options that you may want to override in the target config file -### - -## -## The default compiler -## -default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" - -## -## Disable the gdb stub by default -## -default CONFIG_GDB_STUB=0 - -## -## The Serial Console -## - -# To Enable the Serial Console -default CONFIG_CONSOLE_SERIAL8250=1 - -## Select the serial console baud rate -default CONFIG_TTYS0_BAUD=115200 -#default CONFIG_TTYS0_BAUD=57600 -#default CONFIG_TTYS0_BAUD=38400 -#default CONFIG_TTYS0_BAUD=19200 -#default CONFIG_TTYS0_BAUD=9600 -#default CONFIG_TTYS0_BAUD=4800 -#default CONFIG_TTYS0_BAUD=2400 -#default CONFIG_TTYS0_BAUD=1200 - -# Select the serial console base port -default CONFIG_TTYS0_BASE=0x3f8 - -# Select the serial protocol -# This defaults to 8 data bits, 1 stop bit, and no parity -default CONFIG_TTYS0_LCS=0x3 - -## -### Select the coreboot loglevel -## -## EMERG 1 system is unusable -## ALERT 2 action must be taken immediately -## CRIT 3 critical conditions -## ERR 4 error conditions -## WARNING 5 warning conditions -## NOTICE 6 normal but significant condition -## INFO 7 informational -## CONFIG_DEBUG 8 debug-level messages -## SPEW 9 Way too many details - -## Request this level of debugging output -default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 -## At a maximum only compile in this level of debugging -default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 - -## -## Select power on after power fail setting -default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" - -## -## Don't enable the btext console -## -default CONFIG_CONSOLE_BTEXT=0 - - -### End Options.lb -end diff --git a/src/mainboard/supermicro/x6dhe_g2/Config.lb b/src/mainboard/supermicro/x6dhe_g2/Config.lb deleted file mode 100644 index 11569d9..0000000 --- a/src/mainboard/supermicro/x6dhe_g2/Config.lb +++ /dev/null @@ -1,190 +0,0 @@ -## -## Only use the option table in a normal image -## -default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE - -## CONFIG_XIP_ROM_SIZE must be a power of 2. -default CONFIG_XIP_ROM_SIZE = 64 * 1024 -include /config/nofailovercalculation.lb - -## Set all of the defaults for an x86 architecture -## - -arch i386 end - -## -## Build the objects we have code for in this directory. -## - -driver mainboard.o -if CONFIG_GENERATE_MP_TABLE object mptable.o end -if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end -if CONFIG_HAVE_HARD_RESET object reset.o end - -## -## Romcc output -## -makerule ./failover.E - depends "$(CONFIG_MAINBOARD)/failover.c ../romcc" - action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@" -end - -makerule ./failover.inc - depends "$(CONFIG_MAINBOARD)/failover.c ../romcc" - action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@" -end - -makerule ./auto.E - depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -E -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@" -end - -makerule ./auto.inc - depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@" -end - -## -## Build our 16 bit and 32 bit coreboot entry code -## -mainboardinit cpu/x86/16bit/entry16.inc -mainboardinit cpu/x86/32bit/entry32.inc -ldscript /cpu/x86/16bit/entry16.lds -ldscript /cpu/x86/32bit/entry32.lds - -## -## Build our reset vector (This is where coreboot is entered) -## -if CONFIG_USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds -else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds -end - -### Should this be in the northbridge code? -mainboardinit arch/i386/lib/cpu_reset.inc - -## -## Include an id string (For safe flashing) -## -mainboardinit arch/i386/lib/id.inc -ldscript /arch/i386/lib/id.lds - -### -### This is the early phase of coreboot startup -### Things are delicate and we test to see if we should -### failover to another image. -### -if CONFIG_USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc -end - -### -### O.k. We aren't just an intermediary anymore! -### - -## -## Setup RAM -## -mainboardinit cpu/x86/fpu_enable.inc -mainboardinit cpu/x86/sse_enable.inc -mainboardinit ./auto.inc -mainboardinit cpu/x86/sse_disable.inc -mainboardinit cpu/x86/mmx_disable.inc - - -## -## Include the secondary Configuration files -## -dir /pc80 -config chip.h - -chip northbridge/intel/e7520 # MCH - chip drivers/generic/debug # DEBUGGING - device pnp 00.0 off end - device pnp 00.1 off end - device pnp 00.2 off end - device pnp 00.3 off end - end - device pci_domain 0 on - chip southbridge/intel/i82801er # ICH5R - register "pirq_a_d" = "0x0b070a05" - register "pirq_e_h" = "0x0a808080" - - device pci 1c.0 on - chip drivers/generic/generic - device pci 01.0 on end # onboard gige1 - device pci 02.0 on end # onboard gige2 - end - end - - # USB ports - device pci 1d.0 on end - device pci 1d.1 on end - device pci 1d.4 on end # Southbridge Watchdog timer - device pci 1d.5 on end # Southbridge I/O apic1 - device pci 1d.7 on end - - # VGA / PCI 32-bit - device pci 1e.0 on - chip drivers/generic/generic - device pci 01.0 on end - end - end - - - device pci 1f.0 on # ISA bridge - chip superio/nsc/pc87427 - device pnp 2e.0 off end - device pnp 2e.2 on - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.4 off end - device pnp 2e.5 off end - device pnp 2e.6 off end - device pnp 2e.7 off end - device pnp 2e.9 off end - device pnp 2e.a on end - device pnp 2e.b off end - end - end - device pci 1f.1 on end - device pci 1f.2 on end - device pci 1f.3 on end # SMBus - device pci 1f.5 off end - device pci 1f.6 off end - end - - device pci 00.0 on end # Northbridge - device pci 00.1 on end # Northbridge Error reporting - device pci 01.0 on end - device pci 02.0 on - chip southbridge/intel/pxhd # PXHD 6700 - device pci 00.0 on end # bridge - device pci 00.1 on end # I/O apic - device pci 00.2 on end # bridge - device pci 00.3 on end # I/O apic - end - end -# device register "intrline" = "0x00070105" - device pci 04.0 on end - device pci 06.0 on end - end - - device apic_cluster 0 on - chip cpu/intel/socket_mPGA604 # CPU 0 - device apic 0 on end - end - chip cpu/intel/socket_mPGA604 # CPU 1 - device apic 6 on end - end - end -end diff --git a/src/mainboard/supermicro/x6dhe_g2/Options.lb b/src/mainboard/supermicro/x6dhe_g2/Options.lb deleted file mode 100644 index 87be848..0000000 --- a/src/mainboard/supermicro/x6dhe_g2/Options.lb +++ /dev/null @@ -1,228 +0,0 @@ -uses CONFIG_GENERATE_MP_TABLE -uses CONFIG_GENERATE_PIRQ_TABLE -uses CONFIG_USE_FALLBACK_IMAGE -uses CONFIG_HAVE_FALLBACK_BOOT -uses CONFIG_HAVE_HARD_RESET -uses CONFIG_IRQ_SLOT_COUNT -uses CONFIG_HAVE_OPTION_TABLE -uses CONFIG_LOGICAL_CPUS -uses CONFIG_MAX_CPUS -uses CONFIG_IOAPIC -uses CONFIG_SMP -uses CONFIG_FALLBACK_SIZE -uses CONFIG_ROM_SIZE -uses CONFIG_ROM_SECTION_SIZE -uses CONFIG_ROM_IMAGE_SIZE -uses CONFIG_ROM_SECTION_SIZE -uses CONFIG_ROM_SECTION_OFFSET -uses CONFIG_ROM_PAYLOAD -uses CONFIG_COMPRESSED_PAYLOAD_LZMA -uses CONFIG_PRECOMPRESSED_PAYLOAD -uses CONFIG_ROMBASE -uses CONFIG_XIP_ROM_SIZE -uses CONFIG_XIP_ROM_BASE -uses CONFIG_STACK_SIZE -uses CONFIG_HEAP_SIZE -uses CONFIG_USE_OPTION_TABLE -uses CONFIG_LB_CKS_RANGE_START -uses CONFIG_LB_CKS_RANGE_END -uses CONFIG_LB_CKS_LOC -uses CONFIG_MAINBOARD -uses CONFIG_MAINBOARD_PART_NUMBER -uses CONFIG_MAINBOARD_VENDOR -uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses COREBOOT_EXTRA_VERSION -uses CONFIG_UDELAY_TSC -uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 -uses CONFIG_RAMBASE -uses CONFIG_GDB_STUB -uses CONFIG_CONSOLE_SERIAL8250 -uses CONFIG_TTYS0_BAUD -uses CONFIG_TTYS0_BASE -uses CONFIG_TTYS0_LCS -uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL -uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL -uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL -uses CONFIG_CONSOLE_BTEXT -uses CC -uses HOSTCC -uses CONFIG_CROSS_COMPILE -uses CONFIG_OBJCOPY - - -### -### Build options -### - -## -## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. -## -default CONFIG_ROM_SIZE=1048576 - -## -## Build code for the fallback boot -## -default CONFIG_HAVE_FALLBACK_BOOT=1 - -## -## Delay timer options -## Use timer2 -## -default CONFIG_UDELAY_TSC=1 -default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 - -## -## Build code to reset the motherboard from coreboot -## -default CONFIG_HAVE_HARD_RESET=1 - -## -## Build code to export a programmable irq routing table -## -default CONFIG_GENERATE_PIRQ_TABLE=1 -default CONFIG_IRQ_SLOT_COUNT=15 - -## -## Build code to export an x86 MP table -## Useful for specifying IRQ routing values -## -default CONFIG_GENERATE_MP_TABLE=1 - -## -## Build code to export a CMOS option table -## -default CONFIG_HAVE_OPTION_TABLE=1 - -## -## Move the default coreboot cmos range off of AMD RTC registers -## -default CONFIG_LB_CKS_RANGE_START=49 -default CONFIG_LB_CKS_RANGE_END=122 -default CONFIG_LB_CKS_LOC=123 - -## -## Build code for SMP support -## Only worry about 2 micro processors -## -default CONFIG_SMP=1 -default CONFIG_MAX_CPUS=4 -default CONFIG_LOGICAL_CPUS=0 - -## -## Build code to setup a generic IOAPIC -## -default CONFIG_IOAPIC=1 - -## -## Clean up the motherboard id strings -## -default CONFIG_MAINBOARD_PART_NUMBER="X6DHE_g" -default CONFIG_MAINBOARD_VENDOR= "Supermicro" -default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15D9 -default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x6080 - -### -### coreboot layout values -### - -## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default CONFIG_ROM_IMAGE_SIZE = 65536 - -## -## Use a small 8K stack -## -default CONFIG_STACK_SIZE=0x2000 - -## -## Use a small 32K heap -## -default CONFIG_HEAP_SIZE=0x8000 - - -### -### Compute the location and size of where this firmware image -### (coreboot plus bootloader) will live in the boot rom chip. -### -default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE - -## -## Coreboot C code runs at this location in RAM -## -default CONFIG_RAMBASE=0x00004000 - -## -## Load the payload from the ROM -## -default CONFIG_ROM_PAYLOAD=1 - - -### -### Defaults of options that you may want to override in the target config file -### - -## -## The default compiler -## -default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" - -## -## Disable the gdb stub by default -## -default CONFIG_GDB_STUB=0 - -## -## The Serial Console -## - -# To Enable the Serial Console -default CONFIG_CONSOLE_SERIAL8250=1 - -## Select the serial console baud rate -default CONFIG_TTYS0_BAUD=115200 -#default CONFIG_TTYS0_BAUD=57600 -#default CONFIG_TTYS0_BAUD=38400 -#default CONFIG_TTYS0_BAUD=19200 -#default CONFIG_TTYS0_BAUD=9600 -#default CONFIG_TTYS0_BAUD=4800 -#default CONFIG_TTYS0_BAUD=2400 -#default CONFIG_TTYS0_BAUD=1200 - -# Select the serial console base port -default CONFIG_TTYS0_BASE=0x3f8 - -# Select the serial protocol -# This defaults to 8 data bits, 1 stop bit, and no parity -default CONFIG_TTYS0_LCS=0x3 - -## -### Select the coreboot loglevel -## -## EMERG 1 system is unusable -## ALERT 2 action must be taken immediately -## CRIT 3 critical conditions -## ERR 4 error conditions -## WARNING 5 warning conditions -## NOTICE 6 normal but significant condition -## INFO 7 informational -## CONFIG_DEBUG 8 debug-level messages -## SPEW 9 Way too many details - -## Request this level of debugging output -default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 -## At a maximum only compile in this level of debugging -default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 - -## -## Select power on after power fail setting -default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" - -## -## Don't enable the btext console -## -default CONFIG_CONSOLE_BTEXT=0 - - -### End Options.lb -end diff --git a/src/mainboard/supermicro/x6dhr_ig/Config.lb b/src/mainboard/supermicro/x6dhr_ig/Config.lb deleted file mode 100644 index dc2dd12..0000000 --- a/src/mainboard/supermicro/x6dhr_ig/Config.lb +++ /dev/null @@ -1,187 +0,0 @@ -## -## Only use the option table in a normal image -## -default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE - -## CONFIG_XIP_ROM_SIZE must be a power of 2. -default CONFIG_XIP_ROM_SIZE = 64 * 1024 -include /config/nofailovercalculation.lb - -## -## Set all of the defaults for an x86 architecture -## - -arch i386 end - -## -## Build the objects we have code for in this directory. -## - -driver mainboard.o -if CONFIG_GENERATE_MP_TABLE object mptable.o end -if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end -if CONFIG_HAVE_HARD_RESET object reset.o end - -## -## Romcc output -## -makerule ./failover.E - depends "$(CONFIG_MAINBOARD)/failover.c ../romcc" - action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@" -end - -makerule ./failover.inc - depends "$(CONFIG_MAINBOARD)/failover.c ../romcc" - action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@" -end - -makerule ./auto.E - depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -E -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@" -end -makerule ./auto.inc - depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@" -end - -## -## Build our 16 bit and 32 bit coreboot entry code -## -mainboardinit cpu/x86/16bit/entry16.inc -mainboardinit cpu/x86/32bit/entry32.inc -ldscript /cpu/x86/16bit/entry16.lds -ldscript /cpu/x86/32bit/entry32.lds - -## -## Build our reset vector (This is where coreboot is entered) -## -if CONFIG_USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds -else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds -end - -### Should this be in the northbridge code? -mainboardinit arch/i386/lib/cpu_reset.inc - -## -## Include an id string (For safe flashing) -## -mainboardinit arch/i386/lib/id.inc -ldscript /arch/i386/lib/id.lds - -### -### This is the early phase of coreboot startup -### Things are delicate and we test to see if we should -### failover to another image. -### -if CONFIG_USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc -end - -### -### O.k. We aren't just an intermediary anymore! -### - -## -## Setup RAM -## -mainboardinit cpu/x86/fpu_enable.inc -mainboardinit cpu/x86/sse_enable.inc -mainboardinit ./auto.inc -mainboardinit cpu/x86/sse_disable.inc -mainboardinit cpu/x86/mmx_disable.inc - -## -## Include the secondary Configuration files -## -dir /pc80 -config chip.h - -chip northbridge/intel/e7520 # mch - device pci_domain 0 on - chip southbridge/intel/i82801er # i82801er - # USB ports - device pci 1d.0 on end - device pci 1d.1 on end - device pci 1d.2 on end - device pci 1d.3 on end - device pci 1d.7 on end - - # -> VGA - device pci 1e.0 on end - - # -> IDE - device pci 1f.0 on - chip superio/winbond/w83627hf - device pnp 2e.0 off end - device pnp 2e.2 on - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.4 off end - device pnp 2e.5 off end - device pnp 2e.6 off end - device pnp 2e.7 off end - device pnp 2e.9 off end - device pnp 2e.a on end - device pnp 2e.b off end - end - end - device pci 1f.1 on end - device pci 1f.2 on end - device pci 1f.3 on end - - register "pirq_a_d" = "0x0b070a05" - register "pirq_e_h" = "0x0a808080" - end - device pci 00.0 on end - device pci 00.1 on end - device pci 01.0 on end - device pci 02.0 on end - device pci 03.0 on - chip southbridge/intel/pxhd # pxhd1 - # Bus bridges and ioapics usually bus 2 - device pci 0.0 on end - device pci 0.1 on end - device pci 0.2 on - # On board gig e1000 - chip drivers/generic/generic - device pci 02.0 on end - device pci 02.1 on end - end - end - device pci 0.3 on end - end - end - device pci 04.0 on - chip southbridge/intel/pxhd # pxhd2 - # Bus bridges and ioapics usually bus 5 - device pci 0.0 on end - # Slot 6 is usually 6:2.0 - device pci 0.1 on end - device pci 0.2 on end - # Slot 7 is usually 7:2.0 - device pci 0.3 on end - end - end - device pci 06.0 on end - end - device apic_cluster 0 on - chip cpu/intel/socket_mPGA604 # cpu 0 - device apic 0 on end - end - chip cpu/intel/socket_mPGA604 # cpu 1 - device apic 6 on end - end - end - register "intrline" = "0x00070105" -end - diff --git a/src/mainboard/supermicro/x6dhr_ig/Options.lb b/src/mainboard/supermicro/x6dhr_ig/Options.lb deleted file mode 100644 index d8b836b..0000000 --- a/src/mainboard/supermicro/x6dhr_ig/Options.lb +++ /dev/null @@ -1,228 +0,0 @@ -uses CONFIG_GENERATE_MP_TABLE -uses CONFIG_GENERATE_PIRQ_TABLE -uses CONFIG_USE_FALLBACK_IMAGE -uses CONFIG_HAVE_FALLBACK_BOOT -uses CONFIG_HAVE_HARD_RESET -uses CONFIG_IRQ_SLOT_COUNT -uses CONFIG_HAVE_OPTION_TABLE -uses CONFIG_LOGICAL_CPUS -uses CONFIG_MAX_CPUS -uses CONFIG_IOAPIC -uses CONFIG_SMP -uses CONFIG_FALLBACK_SIZE -uses CONFIG_ROM_SIZE -uses CONFIG_ROM_SECTION_SIZE -uses CONFIG_ROM_IMAGE_SIZE -uses CONFIG_ROM_SECTION_SIZE -uses CONFIG_ROM_SECTION_OFFSET -uses CONFIG_ROM_PAYLOAD -uses CONFIG_COMPRESSED_PAYLOAD_LZMA -uses CONFIG_PRECOMPRESSED_PAYLOAD -uses CONFIG_ROMBASE -uses CONFIG_XIP_ROM_SIZE -uses CONFIG_XIP_ROM_BASE -uses CONFIG_STACK_SIZE -uses CONFIG_HEAP_SIZE -uses CONFIG_USE_OPTION_TABLE -uses CONFIG_LB_CKS_RANGE_START -uses CONFIG_LB_CKS_RANGE_END -uses CONFIG_LB_CKS_LOC -uses CONFIG_MAINBOARD -uses CONFIG_MAINBOARD_PART_NUMBER -uses CONFIG_MAINBOARD_VENDOR -uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses COREBOOT_EXTRA_VERSION -uses CONFIG_UDELAY_TSC -uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 -uses CONFIG_RAMBASE -uses CONFIG_GDB_STUB -uses CONFIG_CONSOLE_SERIAL8250 -uses CONFIG_TTYS0_BAUD -uses CONFIG_TTYS0_BASE -uses CONFIG_TTYS0_LCS -uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL -uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL -uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL -uses CONFIG_CONSOLE_BTEXT -uses CC -uses HOSTCC -uses CONFIG_CROSS_COMPILE -uses CONFIG_OBJCOPY - - -### -### Build options -### - -## -## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. -## -default CONFIG_ROM_SIZE=1048576 - -## -## Build code for the fallback boot -## -default CONFIG_HAVE_FALLBACK_BOOT=1 - -## -## Delay timer options -## Use timer2 -## -default CONFIG_UDELAY_TSC=1 -default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 - -## -## Build code to reset the motherboard from coreboot -## -default CONFIG_HAVE_HARD_RESET=1 - -## -## Build code to export a programmable irq routing table -## -default CONFIG_GENERATE_PIRQ_TABLE=1 -default CONFIG_IRQ_SLOT_COUNT=15 - -## -## Build code to export an x86 MP table -## Useful for specifying IRQ routing values -## -default CONFIG_GENERATE_MP_TABLE=1 - -## -## Build code to export a CMOS option table -## -default CONFIG_HAVE_OPTION_TABLE=1 - -## -## Move the default coreboot cmos range off of AMD RTC registers -## -default CONFIG_LB_CKS_RANGE_START=49 -default CONFIG_LB_CKS_RANGE_END=122 -default CONFIG_LB_CKS_LOC=123 - -## -## Build code for SMP support -## Only worry about 2 micro processors -## -default CONFIG_SMP=1 -default CONFIG_MAX_CPUS=4 -default CONFIG_LOGICAL_CPUS=0 - -## -## Build code to setup a generic IOAPIC -## -default CONFIG_IOAPIC=1 - -## -## Clean up the motherboard id strings -## -default CONFIG_MAINBOARD_PART_NUMBER="X6DHR" -default CONFIG_MAINBOARD_VENDOR= "Supermicro" -default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15D9 -default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x5580 - -### -### coreboot layout values -### - -## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default CONFIG_ROM_IMAGE_SIZE = 65536 - -## -## Use a small 8K stack -## -default CONFIG_STACK_SIZE=0x2000 - -## -## Use a small 32K heap -## -default CONFIG_HEAP_SIZE=0x8000 - - -### -### Compute the location and size of where this firmware image -### (coreboot plus bootloader) will live in the boot rom chip. -### -default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE - -## -## Coreboot C code runs at this location in RAM -## -default CONFIG_RAMBASE=0x00004000 - -## -## Load the payload from the ROM -## -default CONFIG_ROM_PAYLOAD=1 - - -### -### Defaults of options that you may want to override in the target config file -### - -## -## The default compiler -## -default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" - -## -## Disable the gdb stub by default -## -default CONFIG_GDB_STUB=0 - -## -## The Serial Console -## - -# To Enable the Serial Console -default CONFIG_CONSOLE_SERIAL8250=1 - -## Select the serial console baud rate -default CONFIG_TTYS0_BAUD=115200 -#default CONFIG_TTYS0_BAUD=57600 -#default CONFIG_TTYS0_BAUD=38400 -#default CONFIG_TTYS0_BAUD=19200 -#default CONFIG_TTYS0_BAUD=9600 -#default CONFIG_TTYS0_BAUD=4800 -#default CONFIG_TTYS0_BAUD=2400 -#default CONFIG_TTYS0_BAUD=1200 - -# Select the serial console base port -default CONFIG_TTYS0_BASE=0x3f8 - -# Select the serial protocol -# This defaults to 8 data bits, 1 stop bit, and no parity -default CONFIG_TTYS0_LCS=0x3 - -## -### Select the coreboot loglevel -## -## EMERG 1 system is unusable -## ALERT 2 action must be taken immediately -## CRIT 3 critical conditions -## ERR 4 error conditions -## WARNING 5 warning conditions -## NOTICE 6 normal but significant condition -## INFO 7 informational -## CONFIG_DEBUG 8 debug-level messages -## SPEW 9 Way too many details - -## Request this level of debugging output -default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 -## At a maximum only compile in this level of debugging -default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 - -## -## Select power on after power fail setting -default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" - -## -## Don't enable the btext console -## -default CONFIG_CONSOLE_BTEXT=0 - - -### End Options.lb -end diff --git a/src/mainboard/supermicro/x6dhr_ig2/Config.lb b/src/mainboard/supermicro/x6dhr_ig2/Config.lb deleted file mode 100644 index 9e8ce14..0000000 --- a/src/mainboard/supermicro/x6dhr_ig2/Config.lb +++ /dev/null @@ -1,178 +0,0 @@ -## -## Only use the option table in a normal image -## -default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE - -## CONFIG_XIP_ROM_SIZE must be a power of 2. -default CONFIG_XIP_ROM_SIZE = 64 * 1024 -include /config/nofailovercalculation.lb - -## -## Set all of the defaults for an x86 architecture -## - -arch i386 end - -## -## Build the objects we have code for in this directory. -## - -driver mainboard.o -if CONFIG_GENERATE_MP_TABLE object mptable.o end -if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end -if CONFIG_HAVE_HARD_RESET object reset.o end - -## -## Romcc output -## -makerule ./failover.E - depends "$(CONFIG_MAINBOARD)/failover.c ../romcc" - action "../romcc -fno-simplify-phi -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@" -end - -makerule ./failover.inc - depends "$(CONFIG_MAINBOARD)/failover.c ../romcc" - action "../romcc -fno-simplify-phi -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@" -end - -makerule ./auto.E - depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -fno-simplify-phi -E -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@" -end -makerule ./auto.inc - depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -fno-simplify-phi -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@" -end - -## -## Build our 16 bit and 32 bit coreboot entry code -## -mainboardinit cpu/x86/16bit/entry16.inc -mainboardinit cpu/x86/32bit/entry32.inc -ldscript /cpu/x86/16bit/entry16.lds -ldscript /cpu/x86/32bit/entry32.lds - -## -## Build our reset vector (This is where coreboot is entered) -## -if CONFIG_USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds -else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds -end - -### Should this be in the northbridge code? -mainboardinit arch/i386/lib/cpu_reset.inc - -## -## Include an id string (For safe flashing) -## -mainboardinit arch/i386/lib/id.inc -ldscript /arch/i386/lib/id.lds - -### -### This is the early phase of coreboot startup -### Things are delicate and we test to see if we should -### failover to another image. -### -if CONFIG_USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc -end - -### -### O.k. We aren't just an intermediary anymore! -### - -## -## Setup RAM -## -mainboardinit cpu/x86/fpu_enable.inc -mainboardinit cpu/x86/sse_enable.inc -mainboardinit ./auto.inc -mainboardinit cpu/x86/sse_disable.inc -mainboardinit cpu/x86/mmx_disable.inc - -## -## Include the secondary Configuration files -## -dir /pc80 -config chip.h - -chip northbridge/intel/e7520 # mch - device pci_domain 0 on - chip southbridge/intel/i82801er # i82801er - # USB ports - device pci 1d.0 on end - device pci 1d.1 on end - device pci 1d.2 on end - device pci 1d.3 on end - device pci 1d.7 on end - - # -> Bridge - device pci 1e.0 on end - - # -> ISA - device pci 1f.0 on - chip superio/winbond/w83627hf - device pnp 2e.0 off end - device pnp 2e.2 on - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.4 off end - device pnp 2e.5 off end - device pnp 2e.6 off end - device pnp 2e.7 off end - device pnp 2e.9 off end - device pnp 2e.a on end - device pnp 2e.b off end - end - end - # -> IDE - device pci 1f.1 on end - # -> SATA - device pci 1f.2 on end - device pci 1f.3 on end - - register "pirq_a_d" = "0x0b070a05" - register "pirq_e_h" = "0x0a808080" - end - device pci 00.0 on end - device pci 00.1 on end - device pci 01.0 on end - device pci 02.0 on - chip southbridge/intel/pxhd # pxhd1 - # Bus bridges and ioapics usually bus 1 - device pci 0.0 on - # On board gig e1000 - chip drivers/generic/generic - device pci 03.0 on end - device pci 03.1 on end - end - end - device pci 0.1 on end - device pci 0.2 on end - device pci 0.3 on end - end - end - device pci 04.0 on end - device pci 06.0 on end - end - device apic_cluster 0 on - chip cpu/intel/socket_mPGA604 # cpu 0 - device apic 0 on end - end - chip cpu/intel/socket_mPGA604 # cpu 1 - device apic 6 on end - end - end - register "intrline" = "0x00070105" -end - diff --git a/src/mainboard/supermicro/x6dhr_ig2/Options.lb b/src/mainboard/supermicro/x6dhr_ig2/Options.lb deleted file mode 100644 index d8b836b..0000000 --- a/src/mainboard/supermicro/x6dhr_ig2/Options.lb +++ /dev/null @@ -1,228 +0,0 @@ -uses CONFIG_GENERATE_MP_TABLE -uses CONFIG_GENERATE_PIRQ_TABLE -uses CONFIG_USE_FALLBACK_IMAGE -uses CONFIG_HAVE_FALLBACK_BOOT -uses CONFIG_HAVE_HARD_RESET -uses CONFIG_IRQ_SLOT_COUNT -uses CONFIG_HAVE_OPTION_TABLE -uses CONFIG_LOGICAL_CPUS -uses CONFIG_MAX_CPUS -uses CONFIG_IOAPIC -uses CONFIG_SMP -uses CONFIG_FALLBACK_SIZE -uses CONFIG_ROM_SIZE -uses CONFIG_ROM_SECTION_SIZE -uses CONFIG_ROM_IMAGE_SIZE -uses CONFIG_ROM_SECTION_SIZE -uses CONFIG_ROM_SECTION_OFFSET -uses CONFIG_ROM_PAYLOAD -uses CONFIG_COMPRESSED_PAYLOAD_LZMA -uses CONFIG_PRECOMPRESSED_PAYLOAD -uses CONFIG_ROMBASE -uses CONFIG_XIP_ROM_SIZE -uses CONFIG_XIP_ROM_BASE -uses CONFIG_STACK_SIZE -uses CONFIG_HEAP_SIZE -uses CONFIG_USE_OPTION_TABLE -uses CONFIG_LB_CKS_RANGE_START -uses CONFIG_LB_CKS_RANGE_END -uses CONFIG_LB_CKS_LOC -uses CONFIG_MAINBOARD -uses CONFIG_MAINBOARD_PART_NUMBER -uses CONFIG_MAINBOARD_VENDOR -uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses COREBOOT_EXTRA_VERSION -uses CONFIG_UDELAY_TSC -uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 -uses CONFIG_RAMBASE -uses CONFIG_GDB_STUB -uses CONFIG_CONSOLE_SERIAL8250 -uses CONFIG_TTYS0_BAUD -uses CONFIG_TTYS0_BASE -uses CONFIG_TTYS0_LCS -uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL -uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL -uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL -uses CONFIG_CONSOLE_BTEXT -uses CC -uses HOSTCC -uses CONFIG_CROSS_COMPILE -uses CONFIG_OBJCOPY - - -### -### Build options -### - -## -## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. -## -default CONFIG_ROM_SIZE=1048576 - -## -## Build code for the fallback boot -## -default CONFIG_HAVE_FALLBACK_BOOT=1 - -## -## Delay timer options -## Use timer2 -## -default CONFIG_UDELAY_TSC=1 -default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 - -## -## Build code to reset the motherboard from coreboot -## -default CONFIG_HAVE_HARD_RESET=1 - -## -## Build code to export a programmable irq routing table -## -default CONFIG_GENERATE_PIRQ_TABLE=1 -default CONFIG_IRQ_SLOT_COUNT=15 - -## -## Build code to export an x86 MP table -## Useful for specifying IRQ routing values -## -default CONFIG_GENERATE_MP_TABLE=1 - -## -## Build code to export a CMOS option table -## -default CONFIG_HAVE_OPTION_TABLE=1 - -## -## Move the default coreboot cmos range off of AMD RTC registers -## -default CONFIG_LB_CKS_RANGE_START=49 -default CONFIG_LB_CKS_RANGE_END=122 -default CONFIG_LB_CKS_LOC=123 - -## -## Build code for SMP support -## Only worry about 2 micro processors -## -default CONFIG_SMP=1 -default CONFIG_MAX_CPUS=4 -default CONFIG_LOGICAL_CPUS=0 - -## -## Build code to setup a generic IOAPIC -## -default CONFIG_IOAPIC=1 - -## -## Clean up the motherboard id strings -## -default CONFIG_MAINBOARD_PART_NUMBER="X6DHR" -default CONFIG_MAINBOARD_VENDOR= "Supermicro" -default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15D9 -default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x5580 - -### -### coreboot layout values -### - -## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default CONFIG_ROM_IMAGE_SIZE = 65536 - -## -## Use a small 8K stack -## -default CONFIG_STACK_SIZE=0x2000 - -## -## Use a small 32K heap -## -default CONFIG_HEAP_SIZE=0x8000 - - -### -### Compute the location and size of where this firmware image -### (coreboot plus bootloader) will live in the boot rom chip. -### -default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE - -## -## Coreboot C code runs at this location in RAM -## -default CONFIG_RAMBASE=0x00004000 - -## -## Load the payload from the ROM -## -default CONFIG_ROM_PAYLOAD=1 - - -### -### Defaults of options that you may want to override in the target config file -### - -## -## The default compiler -## -default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" - -## -## Disable the gdb stub by default -## -default CONFIG_GDB_STUB=0 - -## -## The Serial Console -## - -# To Enable the Serial Console -default CONFIG_CONSOLE_SERIAL8250=1 - -## Select the serial console baud rate -default CONFIG_TTYS0_BAUD=115200 -#default CONFIG_TTYS0_BAUD=57600 -#default CONFIG_TTYS0_BAUD=38400 -#default CONFIG_TTYS0_BAUD=19200 -#default CONFIG_TTYS0_BAUD=9600 -#default CONFIG_TTYS0_BAUD=4800 -#default CONFIG_TTYS0_BAUD=2400 -#default CONFIG_TTYS0_BAUD=1200 - -# Select the serial console base port -default CONFIG_TTYS0_BASE=0x3f8 - -# Select the serial protocol -# This defaults to 8 data bits, 1 stop bit, and no parity -default CONFIG_TTYS0_LCS=0x3 - -## -### Select the coreboot loglevel -## -## EMERG 1 system is unusable -## ALERT 2 action must be taken immediately -## CRIT 3 critical conditions -## ERR 4 error conditions -## WARNING 5 warning conditions -## NOTICE 6 normal but significant condition -## INFO 7 informational -## CONFIG_DEBUG 8 debug-level messages -## SPEW 9 Way too many details - -## Request this level of debugging output -default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 -## At a maximum only compile in this level of debugging -default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 - -## -## Select power on after power fail setting -default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" - -## -## Don't enable the btext console -## -default CONFIG_CONSOLE_BTEXT=0 - - -### End Options.lb -end |
