20 files changed, 0 insertions, 2803 deletions
diff --git a/src/mainboard/asus/a8n_e/Config.lb b/src/mainboard/asus/a8n_e/Config.lb
deleted file mode 100644
index 374629c..0000000
--- a/src/mainboard/asus/a8n_e/Config.lb
+++ /dev/null
@@ -1,241 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 AMD
-## (Written by Yinghai Lu <yinghailu@amd.com> for AMD)
-## Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de>
-## (Thanks to LSRA University of Mannheim for their support)
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/failovercalculation.lb
-
-arch i386 end
-driver mainboard.o
-# Needed by irq_tables and mptable and acpi_tables.
-object get_bus_conf.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-	if CONFIG_USE_INIT
-		makerule ./auto.o
-			depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
-			action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-		end
-	else
-		makerule ./auto.inc
-			depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
-			action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-			action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
-			action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-		end
-	end
-if CONFIG_HAVE_FAILOVER_BOOT
-	if CONFIG_USE_FAILOVER_IMAGE
-		mainboardinit cpu/x86/16bit/entry16.inc
-		ldscript /cpu/x86/16bit/entry16.lds
-	end
-else
-	if CONFIG_USE_FALLBACK_IMAGE
-		mainboardinit cpu/x86/16bit/entry16.inc
-		ldscript /cpu/x86/16bit/entry16.lds
-	end
-end
-mainboardinit cpu/x86/32bit/entry32.inc
-	if CONFIG_USE_INIT
-		ldscript /cpu/x86/32bit/entry32.lds
-		ldscript /cpu/amd/car/cache_as_ram.lds
-	end
-if CONFIG_HAVE_FAILOVER_BOOT
-	if CONFIG_USE_FAILOVER_IMAGE
-		mainboardinit cpu/x86/16bit/reset16.inc
-		ldscript /cpu/x86/16bit/reset16.lds
-	else
-		mainboardinit cpu/x86/32bit/reset32.inc
-		ldscript /cpu/x86/32bit/reset32.lds
-	end
-else
-	if CONFIG_USE_FALLBACK_IMAGE
-		mainboardinit cpu/x86/16bit/reset16.inc
-		ldscript /cpu/x86/16bit/reset16.lds
-	else
-		mainboardinit cpu/x86/32bit/reset32.inc
-		ldscript /cpu/x86/32bit/reset32.lds
-	end
-end
-# Include an ID string (for safe flashing).
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-# ROMSTRAP table for CK804.
-if CONFIG_HAVE_FAILOVER_BOOT
-	if CONFIG_USE_FAILOVER_IMAGE
-		mainboardinit southbridge/nvidia/ck804/romstrap.inc
-		ldscript /southbridge/nvidia/ck804/romstrap.lds
-	end
-else
-	if CONFIG_USE_FALLBACK_IMAGE
-		mainboardinit southbridge/nvidia/ck804/romstrap.inc
-		ldscript /southbridge/nvidia/ck804/romstrap.lds
-	end
-end
-	mainboardinit cpu/amd/car/cache_as_ram.inc
-if CONFIG_HAVE_FAILOVER_BOOT
-	if CONFIG_USE_FAILOVER_IMAGE
-			ldscript /arch/i386/lib/failover_failover.lds
-	end
-else
-	if CONFIG_USE_FALLBACK_IMAGE
-			ldscript /arch/i386/lib/failover.lds
-	end
-end
-	if CONFIG_USE_INIT
-		initobject auto.o
-	else
-		mainboardinit ./auto.inc
-	end
-config chip.h
-
-chip northbridge/amd/amdk8/root_complex		# Root complex
-  device apic_cluster 0 on			# APIC cluster
-    chip cpu/amd/socket_939			# Socket 939 CPU
-      device apic 0 on end			# APIC
-    end
-  end
-
-  device pci_domain 0 on			# PCI domain
-    chip northbridge/amd/amdk8			# mc0
-      device pci 18.0 on			# Northbridge
-        # Devices on link 0, link 0 == LDT 0
-        chip southbridge/nvidia/ck804		# Southbridge
-          device pci 0.0 on end			# HT
-          device pci 1.0 on			# LPC
-            chip superio/ite/it8712f		# Super I/O
-              device pnp 2e.0 on		# Floppy
-                io 0x60 = 0x3f0
-                irq 0x70 = 6
-                drq 0x74 = 2
-              end
-              device pnp 2e.1 on		# Com1
-                io 0x60 = 0x3f8
-                irq 0x70 = 4
-              end
-              device pnp 2e.2 off		# Com2 (N/A on this board)
-                io 0x60 = 0x2f8
-                irq 0x70 = 3
-              end
-              device pnp 2e.3 on		# Parallel port
-                io 0x60 = 0x378
-                irq 0x70 = 7
-                drq 0x74 = 3
-              end
-              device pnp 2e.4 on		# Environment controller
-                io 0x60 = 0x290
-                io 0x62 = 0x0000
-                irq 0x70 = 0x00
-              end
-              device pnp 2e.5 on		# PS/2 keyboard
-                io 0x60 = 0x60
-                io 0x62 = 0x64
-                irq 0x70 = 1
-                irq 0x71 = 2
-              end
-              device pnp 2e.6 on		# PS/2 mouse
-                irq 0x70 = 12
-                irq 0x71 = 2
-              end
-              device pnp 2e.7 on		# GPIO config
-                io 0x60 = 0x0800
-                # Set GPIO 1 & 2
-                io 0x25 = 0x0000
-                # Set GPIO 3 & 4
-                io 0x27 = 0x2540
-                # GPIO Polarity for Set 3
-                io 0xb2 = 0x2100
-                # GPIO Pin Internal Pull up for Set 3
-                io 0xba = 0x0100
-                # Simple I/O register config
-                io 0xc0 = 0x0000
-                io 0xc2 = 0x2540
-                io 0xc8 = 0x0000
-                io 0xca = 0x0500
-              end
-              device pnp 2e.8 on		# Midi port
-                io 0x60 = 0x300
-                irq 0x70 = 10
-              end
-              device pnp 2e.9 on		# Game port
-                io 0x60 = 0x201
-              end
-              device pnp 2e.a off		# IR (N/A on this board)
-                io 0x60 = 0x310
-                irq 0x70 = 11
-              end
-            end
-          end
-          device pci 1.1 on			# SM 0
-            # chip drivers/generic/generic #dimm 0-0-0
-            #   device i2c 50 on end
-            # end
-            # chip drivers/generic/generic #dimm 0-0-1
-            #   device i2c 51 on end
-            # end
-            # chip drivers/generic/generic #dimm 0-1-0
-            #   device i2c 52 on end
-            # end
-            # chip drivers/generic/generic #dimm 0-1-1
-            #   device i2c 53 on end
-            # end
-            # chip drivers/generic/generic #dimm 1-0-0
-            #   device i2c 54 on end
-            # end
-            # chip drivers/generic/generic #dimm 1-0-1
-            #   device i2c 55 on end
-            # end
-            # chip drivers/generic/generic #dimm 1-1-0
-            #   device i2c 56 on end
-            # end
-            # chip drivers/generic/generic #dimm 1-1-1
-            #   device i2c 57 on end
-            # end
-          end
-          device pci 2.0 on end			# USB 1.1
-          device pci 2.1 on end			# USB 2
-          device pci 4.0 on end			# Onboard audio (ACI)
-          device pci 4.1 off end		# Onboard modem (MCI), N/A
-          device pci 6.0 on end			# IDE
-          device pci 7.0 on end			# SATA 1
-          device pci 8.0 on end			# SATA 0
-          device pci 9.0 on end			# PCI
-          device pci a.0 on end			# NIC
-          device pci b.0 on end			# PCI E 3
-          device pci c.0 on end			# PCI E 2
-          device pci d.0 on end			# PCI E 1
-          device pci e.0 on end			# PCI E 0
-          register "ide0_enable" = "1"
-          register "ide1_enable" = "1"
-          register "sata0_enable" = "1"
-          register "sata1_enable" = "1"
-          # register "mac_eeprom_smbus" = "3"
-          # register "mac_eeprom_addr" = "0x51"
-        end
-      end
-      device pci 18.1 on end
-      device pci 18.2 on end
-      device pci 18.3 on end
-    end
-  end
-end
diff --git a/src/mainboard/asus/a8n_e/Options.lb b/src/mainboard/asus/a8n_e/Options.lb
deleted file mode 100644
index a03db4b..0000000
--- a/src/mainboard/asus/a8n_e/Options.lb
+++ /dev/null
@@ -1,168 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de>
-## (Thanks to LSRA University of Mannheim for their support)
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_USE_FAILOVER_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_FAILOVER_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_FAILOVER_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_CONSOLE_BTEXT
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_HW_MEM_HOLE_SIZEK
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_AP_CODE_IN_CAR
-uses CONFIG_MEM_TRAIN_SEQ
-uses CONFIG_WAIT_BEFORE_CPUS_INIT
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-uses CONFIG_PCI_64BIT_PREF_MEM
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-uses CONFIG_USE_PRINTK_IN_CAR
-uses CONFIG_ID_SECTION_OFFSET
-
-default CONFIG_ROM_SIZE = 512 * 1024
-default CONFIG_ROM_IMAGE_SIZE = 64 * 1024 - CONFIG_FAILOVER_SIZE
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_FAILOVER_SIZE = 4 * 1024
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_HAVE_FAILOVER_BOOT = 1
-default CONFIG_HAVE_HARD_RESET = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 13
-default CONFIG_GENERATE_MP_TABLE = 1
-default CONFIG_HAVE_OPTION_TABLE = 1
-# Move the default coreboot CMOS range off of AMD RTC registers.
-default CONFIG_LB_CKS_RANGE_START = 49
-default CONFIG_LB_CKS_RANGE_END = 122
-default CONFIG_LB_CKS_LOC = 123
-# SMP support (only worry about 2 micro processors).
-default CONFIG_SMP = 1
-default CONFIG_MAX_CPUS = 2
-default CONFIG_MAX_PHYSICAL_CPUS = 1
-default CONFIG_LOGICAL_CPUS = 1
-# 1G memory hole.
-default CONFIG_HW_MEM_HOLE_SIZEK = 0x100000
-# HT Unit ID offset, default is 1, the typical one.
-default CONFIG_HT_CHAIN_UNITID_BASE = 0
-# Real SB Unit ID, default is 0x20, mean don't touch it at last.
-# default CONFIG_HT_CHAIN_END_UNITID_BASE = 0x10
-# Make the SB HT chain on bus 0, default is not (0).
-default CONFIG_SB_HT_CHAIN_ON_BUS0 = 2
-# Only offset for SB chain?, default is yes(1).
-default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0
-# default CONFIG_CONSOLE_BTEXT = 1		# BTEXT console
-default CONFIG_CONSOLE_VGA = 1			# For VGA console
-default CONFIG_PCI_ROM_RUN = 1			# For VGA console
-default CONFIG_USE_DCACHE_RAM = 1
-default CONFIG_DCACHE_RAM_BASE = 0xc8000
-default CONFIG_DCACHE_RAM_SIZE = 32 * 1024
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 4 * 1024
-default CONFIG_USE_INIT = 0
-default CONFIG_AP_CODE_IN_CAR = 0
-default CONFIG_MEM_TRAIN_SEQ = 2
-default CONFIG_WAIT_BEFORE_CPUS_INIT = 0
-# default CONFIG_ENABLE_APIC_EXT_ID = 0
-# default CONFIG_APIC_ID_OFFSET = 0x10
-# default CONFIG_LIFT_BSP_APIC_ID = 0
-# default CONFIG_PCI_64BIT_PREF_MEM = 1
-default CONFIG_IOAPIC = 1
-default CONFIG_MAINBOARD_PART_NUMBER = "A8N-E"
-default CONFIG_MAINBOARD_VENDOR = "ASUS"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1043
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID = 0x815a
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-# Only use the option table in a normal image.
-default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE)
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_GDB_STUB = 0
-default CONFIG_USE_PRINTK_IN_CAR=1
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 8
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 8
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL = "MAINBOARD_POWER_ON"
-default CONFIG_ID_SECTION_OFFSET = 0x80
-
-end
diff --git a/src/mainboard/asus/a8v-e_se/Config.lb b/src/mainboard/asus/a8v-e_se/Config.lb
deleted file mode 100644
index 308a1fe..0000000
--- a/src/mainboard/asus/a8v-e_se/Config.lb
+++ /dev/null
@@ -1,190 +0,0 @@
-## 
-## This file is part of the coreboot project.
-## 
-## Copyright (C) 2007 AMD
-## (Written by Yinghai Lu <yinghailu@amd.com> for AMD)
-## Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
-## 
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-## 
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-## 
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-## 
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_ROM_PAYLOAD = 1
-
-arch i386 end 
-
-driver mainboard.o
-if CONFIG_GENERATE_ACPI_TABLES
-  object acpi_tables.o
-  makerule dsdt.c
-    depends "$(CONFIG_MAINBOARD)/dsdt.asl"
-    action  "iasl -p $(CURDIR)/dsdt -tc $(CONFIG_MAINBOARD)/dsdt.asl"
-    action  "mv dsdt.hex dsdt.c"
-  end
-  object ./dsdt.o
-end
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-  if CONFIG_USE_INIT
-    makerule ./cache_as_ram_auto.o
-      depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
-      action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-    end
-  else
-    makerule ./cache_as_ram_auto.inc
-      depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
-      action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-      action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
-      action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-    end
-  end
-
-if CONFIG_USE_FALLBACK_IMAGE
-  mainboardinit cpu/x86/16bit/entry16.inc
-  ldscript /cpu/x86/16bit/entry16.lds
-  mainboardinit southbridge/via/k8t890/romstrap.inc
-  ldscript /southbridge/via/k8t890/romstrap.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
-  if CONFIG_USE_INIT
-    ldscript /cpu/x86/32bit/entry32.lds
-  end
-  if CONFIG_USE_INIT
-    ldscript /cpu/amd/car/cache_as_ram.lds
-  end
-
-if CONFIG_USE_FALLBACK_IMAGE
-  mainboardinit cpu/x86/16bit/reset16.inc
-  ldscript /cpu/x86/16bit/reset16.lds
-else
-  mainboardinit cpu/x86/32bit/reset32.inc
-  ldscript /cpu/x86/32bit/reset32.lds
-end
-
-  mainboardinit cpu/amd/car/cache_as_ram.inc
-
-if CONFIG_USE_FALLBACK_IMAGE
-    ldscript /arch/i386/lib/failover.lds
-end
-
-  if CONFIG_USE_INIT
-    initobject cache_as_ram_auto.o
-  else
-    mainboardinit ./cache_as_ram_auto.inc
-  end
-
-config chip.h
-
-chip northbridge/amd/amdk8/root_complex		# Root complex
-  device apic_cluster 0 on			# APIC cluster
-    chip cpu/amd/socket_939			# CPU
-      device apic 0 on end			# APIC
-    end
-  end
-  device pci_domain 0 on			# PCI domain
-    chip northbridge/amd/amdk8			# mc0
-      device pci 18.0 on			# Northbridge
-        # Devices on link 0, link 0 == LDT 0
-        chip southbridge/via/vt8237r		# Southbridge
-          register "ide0_enable" = "1"		# Enable IDE channel 0
-          register "ide1_enable" = "1"		# Enable IDE channel 1
-          register "ide0_80pin_cable" = "1"	# 80pin cable on IDE channel 0
-          register "ide1_80pin_cable" = "1"	# 80pin cable on IDE channel 1
-          register "fn_ctrl_lo" = "0"		# Enable SB functions
-          register "fn_ctrl_hi" = "0xad"	# Enable SB functions
-          device pci 0.0 on end			# HT
-          device pci f.1 on end			# IDE
-          device pci 11.0 on			# LPC
-            chip drivers/generic/generic	# DIMM 0-0-0
-              device i2c 50 on end
-            end
-            chip drivers/generic/generic	# DIMM 0-0-1
-              device i2c 51 on end
-            end
-            chip drivers/generic/generic	# DIMM 0-1-0
-              device i2c 52 on end
-            end
-            chip drivers/generic/generic	# DIMM 0-1-1
-              device i2c 53 on end
-            end
-            chip superio/winbond/w83627ehg	# Super I/O
-              device pnp 2e.0 on		# Floppy
-                io 0x60 = 0x3f0
-                irq 0x70 = 6
-                drq 0x74 = 2
-              end
-              device pnp 2e.1 on		# Parallel port
-                io 0x60 = 0x378
-                irq 0x70 = 7
-                drq 0x74 = 3
-              end
-              device pnp 2e.2 on		# Com1
-                io 0x60 = 0x3f8
-                irq 0x70 = 4
-              end
-              device pnp 2e.3 off		# Com2 (N/A on this board)
-                io 0x60 = 0x2f8
-                irq 0x70 = 3
-              end
-              device pnp 2e.5 off		# PS/2 keyboard (off)
-              end
-              device pnp 2e.106 off		# Serial flash
-                io 0x60 = 0x100
-              end
-              device pnp 2e.007 off		# GPIO 1
-              end
-              device pnp 2e.107 on		# Game port
-                io 0x60 = 0x201
-              end
-              device pnp 2e.207 on		# MIDI
-                io 0x62 = 0x330
-                irq 0x70 = 0xa
-              end
-              device pnp 2e.307 off		# GPIO 6
-              end
-              device pnp 2e.8 off		# WDTO_PLED
-              end
-              device pnp 2e.009 on		# GPIO 2 on LDN 9 is in sio_setup
-              end
-              device pnp 2e.109 off		# GPIO 3
-              end
-              device pnp 2e.209 off		# GPIO 4
-              end
-              device pnp 2e.309 on		# GPIO5
-              end
-              device pnp 2e.a off		# ACPI
-              end
-              device pnp 2e.b on		# Hardware monitor
-                io 0x60 = 0x290
-                irq 0x70 = 0
-              end
-            end
-          end
-          device pci 12.0 off end		# VIA LAN (off, other chip used)
-        end
-        chip southbridge/via/k8t890		# "Southbridge" K8T890
-        end
-      end
-      device pci 18.1 on end
-      device pci 18.2 on end
-      device pci 18.3 on end
-    end
-  end
-end
diff --git a/src/mainboard/asus/a8v-e_se/Options.lb b/src/mainboard/asus/a8v-e_se/Options.lb
deleted file mode 100644
index 92c51fe..0000000
--- a/src/mainboard/asus/a8v-e_se/Options.lb
+++ /dev/null
@@ -1,165 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License v2 as published by
-## the Free Software Foundation.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-# uses CONFIG_USE_OPTION_TABLE
-# uses CONFIG_RAMTOP
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-# bx_b001- uses K8_HW_MEM_HOLE_SIZEK
-uses CONFIG_K8_HT_FREQ_1G_SUPPORT
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-# bx_b001- uses K8_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-# bx_b005+
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_USE_PRINTK_IN_CAR
-
-default CONFIG_ROM_SIZE = 512 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_GENERATE_PIRQ_TABLE = 0
-default CONFIG_GENERATE_MP_TABLE = 1
-default CONFIG_HAVE_OPTION_TABLE = 0	# FIXME
-# Move the default coreboot CMOS range off of AMD RTC registers.
-default CONFIG_LB_CKS_RANGE_START = 49
-default CONFIG_LB_CKS_RANGE_END = 122
-default CONFIG_LB_CKS_LOC = 123
-default CONFIG_SMP = 1
-default CONFIG_MAX_CPUS = 2
-default CONFIG_MAX_PHYSICAL_CPUS = 1
-default CONFIG_LOGICAL_CPUS = 1
-default CONFIG_GENERATE_ACPI_TABLES = 1
-
-# 1G memory hole
-# bx_b001- default K8_HW_MEM_HOLE_SIZEK = 0x100000
-
-# Opteron K8 1G HT support
-default CONFIG_K8_HT_FREQ_1G_SUPPORT = 1
-
-# HT Unit ID offset, default is 1, the typical one.
-default CONFIG_HT_CHAIN_UNITID_BASE = 0x0
-
-# Real SB Unit ID, default is 0x20, mean don't touch it at last.
-# default CONFIG_HT_CHAIN_END_UNITID_BASE = 0x0
-
-# Make the SB HT chain on bus 0, default is not (0).
-# bx_b001- default K8_SB_HT_CHAIN_ON_BUS0 = 2
-
-# bx_b005+ make the SB HT chain on bus 0.
-default CONFIG_SB_HT_CHAIN_ON_BUS0 = 1
-
-# Only offset for SB chain?, default is yes(1).
-default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0
-
-default CONFIG_CONSOLE_VGA = 1		# Needed for VGA.
-default CONFIG_PCI_ROM_RUN = 1		# Needed for VGA.
-default CONFIG_USE_DCACHE_RAM = 1
-default CONFIG_DCACHE_RAM_BASE = 0xcc000
-default CONFIG_DCACHE_RAM_SIZE = 0x4000
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x01000
-default CONFIG_USE_INIT = 0
-default CONFIG_ENABLE_APIC_EXT_ID = 0
-default CONFIG_APIC_ID_OFFSET = 0x10
-default CONFIG_LIFT_BSP_APIC_ID = 0
-default CONFIG_IOAPIC = 1
-default CONFIG_MAINBOARD_VENDOR = "ASUS"
-default CONFIG_MAINBOARD_PART_NUMBER = "A8V-E SE"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1043
-# default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID = 0x1234	# FIXME
-default CONFIG_ROM_IMAGE_SIZE = 64 * 1024
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 256 * 1024
-# More 1M for pgtbl.
-# default CONFIG_RAMTOP = 2048*1024
-default CONFIG_RAMBASE = 0x00004000
-# default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_ROM_PAYLOAD = 1
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_GDB_STUB = 0
-default CONFIG_USE_PRINTK_IN_CAR = 1
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3		# 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 8
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 8
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL = "MAINBOARD_POWER_ON"
-end
diff --git a/src/mainboard/asus/m2v-mx_se/Config.lb b/src/mainboard/asus/m2v-mx_se/Config.lb
deleted file mode 100644
index 908d1b7..0000000
--- a/src/mainboard/asus/m2v-mx_se/Config.lb
+++ /dev/null
@@ -1,167 +0,0 @@
-## 
-## This file is part of the coreboot project.
-## 
-## Copyright (C) 2007 AMD
-## (Written by Yinghai Lu <yinghailu@amd.com> for AMD)
-## Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
-## 
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-## 
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-## 
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-## 
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end 
-
-driver mainboard.o
-if CONFIG_GENERATE_ACPI_TABLES
-  object acpi_tables.o
-  makerule dsdt.c
-    depends "$(CONFIG_MAINBOARD)/dsdt.asl"
-    action  "iasl -p $(CURDIR)/dsdt -tc $(CONFIG_MAINBOARD)/dsdt.asl"
-    action  "mv dsdt.hex dsdt.c"
-  end
-  object ./dsdt.o
-end
-
-  if CONFIG_USE_INIT
-    makerule ./cache_as_ram_auto.o
-      depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
-      action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-    end
-  else
-    makerule ./cache_as_ram_auto.inc
-      depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
-      action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
-      action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
-      action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
-    end
-  end
-
-if CONFIG_USE_FALLBACK_IMAGE
-  mainboardinit cpu/x86/16bit/entry16.inc
-  ldscript /cpu/x86/16bit/entry16.lds
-  mainboardinit southbridge/via/k8t890/romstrap.inc
-  ldscript /southbridge/via/k8t890/romstrap.lds
-end
-
-mainboardinit cpu/x86/32bit/entry32.inc
-
-  if CONFIG_USE_INIT
-    ldscript /cpu/x86/32bit/entry32.lds
-  end
-  if CONFIG_USE_INIT
-    ldscript /cpu/amd/car/cache_as_ram.lds
-  end
-
-if CONFIG_USE_FALLBACK_IMAGE
-  mainboardinit cpu/x86/16bit/reset16.inc
-  ldscript /cpu/x86/16bit/reset16.lds
-else
-  mainboardinit cpu/x86/32bit/reset32.inc
-  ldscript /cpu/x86/32bit/reset32.lds
-end
-
-  mainboardinit cpu/amd/car/cache_as_ram.inc
-
-if CONFIG_USE_FALLBACK_IMAGE
-    ldscript /arch/i386/lib/failover.lds
-end
-
-  if CONFIG_USE_INIT
-    initobject cache_as_ram_auto.o
-  else
-    mainboardinit ./cache_as_ram_auto.inc
-  end
-
-config chip.h
-
-chip northbridge/amd/amdk8/root_complex		# Root complex
-  device apic_cluster 0 on			# APIC cluster
-    chip cpu/amd/socket_AM2			# CPU
-      device apic 0 on end			# APIC
-    end
-  end
-  device pci_domain 0 on			# PCI domain
-    chip northbridge/amd/amdk8			# mc0
-      device pci 18.0 on			# Northbridge
-        # Devices on link 0, link 0 == LDT 0
-        chip southbridge/via/vt8237r		# Southbridge
-          register "ide0_enable" = "1"		# Enable IDE channel 0
-          register "ide1_enable" = "1"		# Enable IDE channel 1
-          register "ide0_80pin_cable" = "1"	# 80pin cable on IDE channel 0
-          register "ide1_80pin_cable" = "1"	# 80pin cable on IDE channel 1
-          register "fn_ctrl_lo" = "0xc0"	# Enable SB functions
-          register "fn_ctrl_hi" = "0x1d"	# Enable SB functions
-          device pci 0.0 on end			# HT
-          device pci f.1 on end			# IDE
-          device pci 11.0 on			# LPC
-            chip drivers/generic/generic	# DIMM 0-0-0
-              device i2c 50 on end
-            end
-            chip drivers/generic/generic	# DIMM 0-0-1
-              device i2c 51 on end
-            end
-            chip drivers/generic/generic	# DIMM 0-1-0
-              device i2c 52 on end
-            end
-            chip drivers/generic/generic	# DIMM 0-1-1
-              device i2c 53 on end
-            end
-            chip superio/ite/it8712f		# Super I/O
-              device pnp 2e.0 on		# Floppy
-                io 0x60 = 0x3f0
-                irq 0x70 = 6
-                drq 0x74 = 2
-              end
-              device pnp 2e.1 on		# Com1
-                io 0x60 = 0x3f8
-                irq 0x70 = 4
-              end
-              device pnp 2e.2 off		# Com2
-                io 0x60 = 0x2f8
-                irq 0x70 = 3
-              end
-              device pnp 2e.3 on		# Parallel port
-                io 0x60 = 0x378
-                irq 0x70 = 7
-              end
-              device pnp 2e.4 on		# Environment controller
-                io 0x60 = 0x290
-                io 0x62 = 0x230
-                irq 0x70 = 0x00
-              end
-              device pnp 2e.5 off end		# PS/2 keyboard
-              device pnp 2e.6 off end		# PS/2 mouse
-              device pnp 2e.7 off end		# GPIO config
-              device pnp 2e.8 off end		# Midi port
-              device pnp 2e.9 off end		# Game port
-              device pnp 2e.a off end		# IR
-	     end
-	   end
-          device pci 12.0 on end		# VIA LAN
-          device pci 13.0 on end		# br
-          device pci 13.1 on end		# br2 need to have it here to discover it
-        end
-        chip southbridge/via/k8t890		# "Southbridge" K8M890
-        end
-      end
-      device pci 18.1 on end
-      device pci 18.2 on end
-      device pci 18.3 on end
-    end
-  end
-end
diff --git a/src/mainboard/asus/m2v-mx_se/Options.lb b/src/mainboard/asus/m2v-mx_se/Options.lb
deleted file mode 100644
index eaa7168..0000000
--- a/src/mainboard/asus/m2v-mx_se/Options.lb
+++ /dev/null
@@ -1,174 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007, 2009 Rudolf Marek <r.marek@assembler.cz>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License v2 as published by
-## the Free Software Foundation.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_RAMTOP
-uses CONFIG_GENERATE_ACPI_TABLES
-uses CONFIG_HAVE_MAINBOARD_RESOURCES
-uses CONFIG_HAVE_ACPI_RESUME
-uses CONFIG_HAVE_LOW_TABLES
-uses CONFIG_LB_CKS_RANGE_START
-uses CONFIG_LB_CKS_RANGE_END
-uses CONFIG_LB_CKS_LOC
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_RAMBASE
-uses CONFIG_GDB_STUB
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CONFIG_VGA
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-# bx_b001- uses K8_HW_MEM_HOLE_SIZEK
-uses CONFIG_K8_HT_FREQ_1G_SUPPORT
-uses CONFIG_USE_DCACHE_RAM
-uses CONFIG_DCACHE_RAM_BASE
-uses CONFIG_DCACHE_RAM_SIZE
-uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
-uses CONFIG_USE_INIT
-uses CONFIG_ENABLE_APIC_EXT_ID
-uses CONFIG_APIC_ID_OFFSET
-uses CONFIG_LIFT_BSP_APIC_ID
-uses CONFIG_HT_CHAIN_UNITID_BASE
-uses CONFIG_HT_CHAIN_END_UNITID_BASE
-# bx_b001- uses K8_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
-# bx_b005+
-uses CONFIG_SB_HT_CHAIN_ON_BUS0
-uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_USE_PRINTK_IN_CAR
-
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_HAVE_HARD_RESET = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 0
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_OPTION_TABLE = 1	# FIXME
-# Move the default coreboot CMOS range off of AMD RTC registers.
-default CONFIG_LB_CKS_RANGE_START = 49
-default CONFIG_LB_CKS_RANGE_END = 122
-default CONFIG_LB_CKS_LOC = 123
-default CONFIG_SMP = 1
-default CONFIG_MAX_CPUS = 2
-default CONFIG_MAX_PHYSICAL_CPUS = 1
-default CONFIG_LOGICAL_CPUS = 1
-default CONFIG_GENERATE_ACPI_TABLES = 1
-default CONFIG_HAVE_MAINBOARD_RESOURCES = 1
-default CONFIG_HAVE_LOW_TABLES = 0
-default CONFIG_HAVE_ACPI_RESUME = 1
-
-# 1G memory hole
-# bx_b001- default K8_HW_MEM_HOLE_SIZEK = 0x100000
-
-# Opteron K8 1G HT support
-default CONFIG_K8_HT_FREQ_1G_SUPPORT = 1
-
-# HT Unit ID offset, default is 1, the typical one.
-default CONFIG_HT_CHAIN_UNITID_BASE = 0x0
-
-# Real SB Unit ID, default is 0x20, mean don't touch it at last.
-# default CONFIG_HT_CHAIN_END_UNITID_BASE = 0x0
-
-# Make the SB HT chain on bus 0, default is not (0).
-# bx_b001- default K8_SB_HT_CHAIN_ON_BUS0 = 2
-
-# bx_b005+ make the SB HT chain on bus 0.
-default CONFIG_SB_HT_CHAIN_ON_BUS0 = 1
-
-# Only offset for SB chain?, default is yes(1).
-default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0
-
-default CONFIG_VGA = 1
-default CONFIG_CONSOLE_VGA = 1		# Needed for VGA.
-default CONFIG_PCI_ROM_RUN = 0		# Needed for VGA.
-default CONFIG_USE_DCACHE_RAM = 1
-default CONFIG_DCACHE_RAM_BASE = 0xcc000
-default CONFIG_DCACHE_RAM_SIZE = 0x4000
-default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE = 0x01000
-default CONFIG_USE_INIT = 0
-default CONFIG_ENABLE_APIC_EXT_ID = 0
-default CONFIG_APIC_ID_OFFSET = 0x10
-default CONFIG_LIFT_BSP_APIC_ID = 0
-default CONFIG_IOAPIC = 1
-default CONFIG_MAINBOARD_VENDOR = "ASUS"
-default CONFIG_MAINBOARD_PART_NUMBER = "M2V-MX SE"
-default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1043
-# default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID = 0x1234	# FIXME
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 256 * 1024
-# More 1M for pgtbl.
-default CONFIG_RAMTOP = 32768*1024
-# to 1MB
-default CONFIG_RAMBASE = 0x1F00000
-default CONFIG_USE_OPTION_TABLE = 0
-# default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_ROM_PAYLOAD = 1
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_GDB_STUB = 0
-default CONFIG_USE_PRINTK_IN_CAR=1
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3		# 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL = "MAINBOARD_POWER_ON"
-
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_ROM_IMAGE_SIZE = 64 * 1024
-end
diff --git a/src/mainboard/asus/mew-am/Config.lb b/src/mainboard/asus/mew-am/Config.lb
deleted file mode 100644
index af6423c..0000000
--- a/src/mainboard/asus/mew-am/Config.lb
+++ /dev/null
@@ -1,135 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE
-	object irq_tables.o
-end
-makerule ./failover.E
-	depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
-	action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
-	depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
-	action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
-	# depends	"$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
-	depends	"$(CONFIG_MAINBOARD)/auto.c ../romcc"
-	# Note: The -mcpu=p2 is important, or else... 'too few registers'.
-	action	"../romcc -mcpu=p2 -E -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
-	# depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
-	depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
-	# Note: The -mcpu=p2 is important, or else... 'too few registers'.
-	action	"../romcc -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
-	mainboardinit cpu/x86/16bit/reset16.inc
-	ldscript /cpu/x86/16bit/reset16.lds
-else
-	mainboardinit cpu/x86/32bit/reset32.inc
-	ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
-	ldscript /arch/i386/lib/failover.lds
-	mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-dir /pc80
-config chip.h
-
-# TODO: On-board graphics.
-chip northbridge/intel/i82810		# Northbridge
-  device apic_cluster 0 on		# APIC cluster
-    chip cpu/intel/socket_PGA370	# CPU
-      device apic 0 on end		# APIC
-    end
-  end
-  device pci_domain 0 on		# PCI domain
-    device pci 0.0 on end		# Graphics Memory Controller Hub (GMCH)
-    device pci 1.0 on end		# Chipset Graphics Controller (CGC)
-    chip southbridge/intel/i82801xx	# Southbridge
-      register "ide0_enable" = "1"
-      register "ide1_enable" = "1"
-
-      device pci 1e.0 on end		# PCI bridge
-      device pci 1f.0 on		# ISA bridge
-        chip superio/smsc/smscsuperio	# Super I/O
-          device pnp 2e.0 on		# Floppy
-            io 0x60 = 0x3f0
-            irq 0x70 = 6
-            drq 0x74 = 2
-          end
-          device pnp 2e.3 on		# Parallel port
-            io 0x60 = 0x378
-            irq 0x70 = 7
-            drq 0x74 = 4
-          end
-          device pnp 2e.4 on		# COM1
-            io 0x60 = 0x3f8
-            irq 0x70 = 4
-          end
-          device pnp 2e.5 on		# COM2 / IR
-            io 0x60 = 0x2f8
-            irq 0x70 = 3
-          end
-          device pnp 2e.7 on		# PS/2 keyboard / mouse
-            io 0x60 = 0x60
-            io 0x62 = 0x64
-            irq 0x70 = 1		# PS/2 keyboard interrupt
-            irq 0x72 = 12		# PS/2 mouse interrupt
-          end
-          device pnp 2e.9 on		# Game port
-            io 0x60 = 0x201
-          end
-          device pnp 2e.a on		# Power-management events (PME)
-            io 0x60 = 0x600
-          end
-          device pnp 2e.b on		# MIDI port (MPU-401)
-            io 0x60 = 0x330
-            irq 0x70 = 5
-          end
-        end
-      end
-      device pci 1f.1 on end		# IDE
-      device pci 1f.2 on end		# USB
-      device pci 1f.3 on end		# SMbus
-      device pci 1f.5 off end		# AC'97 audio (N/A, uses CS4280 chip)
-      device pci 1f.6 off end		# AC'97 modem (N/A)
-    end
-  end
-end
diff --git a/src/mainboard/asus/mew-am/Options.lb b/src/mainboard/asus/mew-am/Options.lb
deleted file mode 100644
index c62bf48..0000000
--- a/src/mainboard/asus/mew-am/Options.lb
+++ /dev/null
@@ -1,97 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-
-default CONFIG_ROM_SIZE = 512 * 1024		# Override this in targets/*/Config.lb.
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 8		# Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_VENDOR = "N/A"	# Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_PART_NUMBER = "N/A"	# Override this in targets/*/Config.lb.
-default CONFIG_ROM_IMAGE_SIZE = 64 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_HAVE_OPTION_TABLE = 0
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3			# 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9	# Override this in targets/*/Config.lb.
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9	# Override this in targets/*/Config.lb.
-default CONFIG_CONSOLE_VGA = 1		# Override this in targets/*/Config.lb.
-default CONFIG_PCI_ROM_RUN = 1		# Override this in targets/*/Config.lb.
-
-end
diff --git a/src/mainboard/asus/mew-vm/Config.lb b/src/mainboard/asus/mew-vm/Config.lb
deleted file mode 100644
index 3cd4db2..0000000
--- a/src/mainboard/asus/mew-vm/Config.lb
+++ /dev/null
@@ -1,147 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-
-##
-## Romcc output
-##
-makerule ./failover.E
-	depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc" 
-	action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-
-makerule ./failover.inc
-	depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
-	action "../romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-
-makerule ./auto.E 
-	depends	"$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc" 
-	action	"../romcc -E -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc 
-	depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
-	action	"../romcc    -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE 
-	mainboardinit cpu/x86/16bit/reset16.inc 
-	ldscript /cpu/x86/16bit/reset16.lds 
-else
-	mainboardinit cpu/x86/32bit/reset32.inc 
-	ldscript /cpu/x86/32bit/reset32.lds 
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup 
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
-	ldscript /arch/i386/lib/failover.lds 
-	mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-##
-## Include the secondary Configuration files 
-##
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i82810
-	device pci_domain 0 on 
-		device pci 0.0 on end # Host bridge
-		device pci 1.0 on # Onboard Video
-			#	device pci 1.0 on end
-		end
-		chip southbridge/intel/i82801xx # Southbridge
-      			register "ide0_enable" = "1"
-      			register "ide1_enable" = "1"
-
-			device pci 1e.0 on # PCI Bridge
-				#	device pci 1.0 on end
-			end
-			device pci 1f.0 on  # ISA/LPC? Bridge
-				chip superio/smsc/lpc47b272
-					device pnp 2e.0 off # Floppy
-						io 0x60 = 0x3f0
-						irq 0x70 = 6
-						drq 0x74 = 2
-					end
-					device pnp 2e.3 off # Parallel Port
-						io 0x60 = 0x378
-						irq 0x70 = 7
-					end
-					device pnp 2e.4 on # Com1
-						io 0x60 = 0x3f8
-						irq 0x70 = 4
-					end
-					device pnp 2e.5 off # Com2
-						io 0x60 = 0x2f8
-						irq 0x70 = 3
-					end
-					device pnp 2e.7 on # Keyboard
-						io 0x60 = 0x60
-						io 0x62 = 0x64
-						irq 0x70 = 1 # Keyboard interrupt
-						irq 0x72 = 12 # Mouse interrupt
-					end
-					device pnp 2e.a off end # ACPI
-				end
-			end
-			device pci 1f.1 on end # IDE
-			device pci 1f.2 on end # USB
-			device pci 1f.3 on end # SMBus
-			device pci 1f.5 off end # AC'97, no header on MEW-VM
-			device pci 1f.6 off end # AC'97 Modem (MC'97)
-		end
-	end
-	chip cpu/intel/socket_PGA370
-	end
-end
-
diff --git a/src/mainboard/asus/mew-vm/Options.lb b/src/mainboard/asus/mew-vm/Options.lb
deleted file mode 100644
index 50f0b54..0000000
--- a/src/mainboard/asus/mew-vm/Options.lb
+++ /dev/null
@@ -1,154 +0,0 @@
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-
-## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
-default CONFIG_ROM_SIZE  = 512*1024
-
-###
-### Build options
-###
-
-##
-## Build code for the fallback boot
-##
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-
-##
-## no MP table
-##
-default CONFIG_GENERATE_MP_TABLE = 0
-
-##
-## Build code to reset the motherboard from coreboot
-##
-default CONFIG_HAVE_HARD_RESET = 0
-
-##
-## Build code to export a programmable irq routing table
-##
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 11
-
-##
-## Build code to export a CMOS option table
-##
-default CONFIG_HAVE_OPTION_TABLE = 0
-
-###
-### coreboot layout values
-###
-
-## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default CONFIG_ROM_IMAGE_SIZE = 65536
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-
-##
-## Use a small 8K stack
-##
-default CONFIG_STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default CONFIG_HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-
-default CONFIG_RAMBASE = 0x00004000
-
-default CONFIG_ROM_PAYLOAD     = 1
-
-##
-## The default compiler
-##
-default CONFIG_CROSS_COMPILE=""
-default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default CONFIG_TTYS0_BAUD=115200
-#default CONFIG_TTYS0_BAUD=57600
-#default CONFIG_TTYS0_BAUD=38400
-#default CONFIG_TTYS0_BAUD=19200
-#default CONFIG_TTYS0_BAUD=9600
-#default CONFIG_TTYS0_BAUD=4800
-#default CONFIG_TTYS0_BAUD=2400
-#default CONFIG_TTYS0_BAUD=1200
-
-# Select the serial console base port
-default CONFIG_TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default CONFIG_TTYS0_LCS=0x3
-
-##
-### Select the coreboot loglevel
-##
-## EMERG      1   system is unusable               
-## ALERT      2   action must be taken immediately 
-## CRIT       3   critical conditions              
-## ERR        4   error conditions                 
-## WARNING    5   warning conditions               
-## NOTICE     6   normal but significant condition 
-## INFO       7   informational                    
-## CONFIG_DEBUG      8   debug-level messages             
-## SPEW       9   Way too many details             
-
-## Request this level of debugging output
-default  CONFIG_DEFAULT_CONSOLE_LOGLEVEL=9
-## At a maximum only compile in this level of debugging
-default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9
-
-default CONFIG_UDELAY_TSC=1
-
-end
diff --git a/src/mainboard/asus/p2b-d/Config.lb b/src/mainboard/asus/p2b-d/Config.lb
deleted file mode 100644
index 1170d4c..0000000
--- a/src/mainboard/asus/p2b-d/Config.lb
+++ /dev/null
@@ -1,134 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-makerule ./failover.E
-	depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
-	action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
-	depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
-	action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
-	# depends	"$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
-	depends	"$(CONFIG_MAINBOARD)/auto.c ../romcc"
-	action	"../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
-	# depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
-	depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
-	action	"../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
-	mainboardinit cpu/x86/16bit/reset16.inc
-	ldscript /cpu/x86/16bit/reset16.lds
-else
-	mainboardinit cpu/x86/32bit/reset32.inc
-	ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
-	ldscript /arch/i386/lib/failover.lds
-	mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i440bx		# Northbridge
-  device apic_cluster 0 on		# APIC cluster
-    chip cpu/intel/slot_2		# CPU (FIXME: It's slot 1, actually)
-      device apic 0 on end		# APIC
-    end
-    chip cpu/intel/slot_2		# CPU (FIXME: It's slot 1, actually)
-      device apic 1 on end		# APIC
-    end
-  end
-  device pci_domain 0 on		# PCI domain
-    device pci 0.0 on end		# Host bridge
-    device pci 1.0 on end		# PCI/AGP bridge
-    chip southbridge/intel/i82371eb	# Southbridge
-      device pci 4.0 on			# ISA bridge
-        chip superio/winbond/w83977tf	# Super I/O
-          device pnp 3f0.0 on		# Floppy
-            io 0x60 = 0x3f0
-            irq 0x70 = 6
-            drq 0x74 = 2
-          end
-          device pnp 3f0.1 on		# Parallel port
-            io 0x60 = 0x378
-            irq 0x70 = 7
-          end
-          device pnp 3f0.2 on		# COM1
-            io 0x60 = 0x3f8
-            irq 0x70 = 4
-          end
-          device pnp 3f0.3 on		# COM2 / IR
-            io 0x60 = 0x2f8
-            irq 0x70 = 3
-          end
-          device pnp 3f0.5 on		# PS/2 keyboard / mouse
-            io 0x60 = 0x60
-            io 0x62 = 0x64
-            irq 0x70 = 1		# PS/2 keyboard interrupt
-            irq 0x72 = 12		# PS/2 mouse interrupt
-          end
-          device pnp 3f0.7 on		# GPIO 1
-          end
-          device pnp 3f0.8 on		# GPIO 2
-          end
-          device pnp 3f0.9 on		# GPIO 3
-          end
-          device pnp 3f0.a on		# ACPI
-          end
-        end
-      end
-      device pci 4.1 on	end		# IDE
-      device pci 4.2 on	end		# USB
-      device pci 4.3 on end		# ACPI
-      register "ide0_enable" = "1"
-      register "ide1_enable" = "1"
-      register "ide_legacy_enable" = "1"
-      # Enable UDMA/33 for higher speed if your IDE device(s) support it.
-      register "ide0_drive0_udma33_enable" = "1"
-      register "ide0_drive1_udma33_enable" = "1"
-      register "ide1_drive0_udma33_enable" = "1"
-      register "ide1_drive1_udma33_enable" = "1"
-    end
-  end
-end
diff --git a/src/mainboard/asus/p2b-d/Options.lb b/src/mainboard/asus/p2b-d/Options.lb
deleted file mode 100644
index 2ccd3a9..0000000
--- a/src/mainboard/asus/p2b-d/Options.lb
+++ /dev/null
@@ -1,103 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_SMP
-uses CONFIG_MAX_CPUS
-uses CONFIG_IOAPIC
-
-default CONFIG_ROM_SIZE = 256 * 1024
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 1
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 6		# Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_VENDOR = "N/A"	# Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_PART_NUMBER = "N/A"	# Override this in targets/*/Config.lb.
-default CONFIG_ROM_IMAGE_SIZE = 36 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_HAVE_OPTION_TABLE = 0
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_SMP = 1
-default CONFIG_MAX_CPUS = 2
-default CONFIG_IOAPIC = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3			# 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_CONSOLE_VGA = 1
-default CONFIG_PCI_ROM_RUN = 1
-end
diff --git a/src/mainboard/asus/p2b-ds/Config.lb b/src/mainboard/asus/p2b-ds/Config.lb
deleted file mode 100644
index 4307c39..0000000
--- a/src/mainboard/asus/p2b-ds/Config.lb
+++ /dev/null
@@ -1,135 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_MP_TABLE object mptable.o end
-if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
-makerule ./failover.E
-	depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
-	action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
-	depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
-	action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
-	# depends	"$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
-	depends	"$(CONFIG_MAINBOARD)/auto.c ../romcc"
-	action	"../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
-	# depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
-	depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
-	action	"../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
-	mainboardinit cpu/x86/16bit/reset16.inc
-	ldscript /cpu/x86/16bit/reset16.lds
-else
-	mainboardinit cpu/x86/32bit/reset32.inc
-	ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
-	ldscript /arch/i386/lib/failover.lds
-	mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i440bx		# Northbridge
-  device apic_cluster 0 on		# APIC cluster
-    chip cpu/intel/slot_2		# CPU (FIXME: It's slot 1, actually)
-      device apic 0 on end		# APIC
-    end
-    chip cpu/intel/slot_2		# CPU (FIXME: It's slot 1, actually)
-      device apic 1 on end		# APIC
-    end
-  end
-  device pci_domain 0 on		# PCI domain
-    device pci 0.0 on end		# Host bridge
-    device pci 1.0 on end		# PCI/AGP bridge
-    chip southbridge/intel/i82371eb	# Southbridge
-      device pci 4.0 on			# ISA bridge
-        chip superio/winbond/w83977tf	# Super I/O
-          device pnp 3f0.0 on		# Floppy
-            io 0x60 = 0x3f0
-            irq 0x70 = 6
-            drq 0x74 = 2
-          end
-          device pnp 3f0.1 on		# Parallel port
-            io 0x60 = 0x378
-            irq 0x70 = 7
-          end
-          device pnp 3f0.2 on		# COM1
-            io 0x60 = 0x3f8
-            irq 0x70 = 4
-          end
-          device pnp 3f0.3 on		# COM2 / IR
-            io 0x60 = 0x2f8
-            irq 0x70 = 3
-          end
-          device pnp 3f0.5 on		# PS/2 keyboard / mouse
-            io 0x60 = 0x60
-            io 0x62 = 0x64
-            irq 0x70 = 1		# PS/2 keyboard interrupt
-            irq 0x72 = 12		# PS/2 mouse interrupt
-          end
-          device pnp 3f0.7 on		# GPIO 1
-          end
-          device pnp 3f0.8 on		# GPIO 2
-          end
-          device pnp 3f0.9 on		# GPIO 3
-          end
-          device pnp 3f0.a on		# ACPI
-          end
-        end
-      end
-      device pci 4.1 on	end		# IDE
-      device pci 4.2 on	end		# USB
-      device pci 4.3 on end		# ACPI
-      device pci 6.0 on end		# Onboard SCSI
-      register "ide0_enable" = "1"
-      register "ide1_enable" = "1"
-      register "ide_legacy_enable" = "1"
-      # Enable UDMA/33 for higher speed if your IDE device(s) support it.
-      register "ide0_drive0_udma33_enable" = "1"
-      register "ide0_drive1_udma33_enable" = "1"
-      register "ide1_drive0_udma33_enable" = "1"
-      register "ide1_drive1_udma33_enable" = "1"
-    end
-  end
-end
diff --git a/src/mainboard/asus/p2b-ds/Options.lb b/src/mainboard/asus/p2b-ds/Options.lb
deleted file mode 100644
index 45214cf..0000000
--- a/src/mainboard/asus/p2b-ds/Options.lb
+++ /dev/null
@@ -1,104 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses CONFIG_SMP
-uses CONFIG_MAX_CPUS
-uses CONFIG_IOAPIC
-
-default CONFIG_ROM_SIZE = 256 * 1024
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 1
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 7		# Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_VENDOR = "N/A"	# Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_PART_NUMBER = "N/A"	# Override this in targets/*/Config.lb.
-default CONFIG_ROM_IMAGE_SIZE = 36 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_HAVE_OPTION_TABLE = 0
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_SMP = 1
-default CONFIG_MAX_CPUS = 2
-default CONFIG_IOAPIC = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3			# 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_CONSOLE_VGA = 1
-default CONFIG_PCI_ROM_RUN = 1
-
-end
diff --git a/src/mainboard/asus/p2b-f/Config.lb b/src/mainboard/asus/p2b-f/Config.lb
deleted file mode 100644
index 4be4b44..0000000
--- a/src/mainboard/asus/p2b-f/Config.lb
+++ /dev/null
@@ -1,132 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE
-	object irq_tables.o
-end
-makerule ./failover.E
-	depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
-	action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
-	depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
-	action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
-	# depends	"$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
-	depends	"$(CONFIG_MAINBOARD)/auto.c ../romcc"
-	action	"../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
-	# depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
-	depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
-	action	"../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
-	mainboardinit cpu/x86/16bit/reset16.inc
-	ldscript /cpu/x86/16bit/reset16.lds
-else
-	mainboardinit cpu/x86/32bit/reset32.inc
-	ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
-	ldscript /arch/i386/lib/failover.lds
-	mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i440bx		# Northbridge
-  device apic_cluster 0 on		# APIC cluster
-    chip cpu/intel/slot_2		# CPU (FIXME: It's slot 1, actually)
-      device apic 0 on end		# APIC
-    end
-  end
-  device pci_domain 0 on		# PCI domain
-    device pci 0.0 on end		# Host bridge
-    device pci 1.0 on end		# PCI/AGP bridge
-    chip southbridge/intel/i82371eb	# Southbridge
-      device pci 4.0 on			# ISA bridge
-        chip superio/winbond/w83977tf	# Super I/O (FIXME: It's W83977EF!)
-          device pnp 3f0.0 on		# Floppy
-            io 0x60 = 0x3f0
-            irq 0x70 = 6
-            drq 0x74 = 2
-          end
-          device pnp 3f0.1 on		# Parallel port
-            io 0x60 = 0x378
-            irq 0x70 = 7
-          end
-          device pnp 3f0.2 on		# COM1
-            io 0x60 = 0x3f8
-            irq 0x70 = 4
-          end
-          device pnp 3f0.3 on		# COM2 / IR
-            io 0x60 = 0x2f8
-            irq 0x70 = 3
-          end
-          device pnp 3f0.5 on		# PS/2 keyboard
-            io 0x60 = 0x60
-            io 0x62 = 0x64
-            irq 0x70 = 1		# PS/2 keyboard interrupt
-            irq 0x72 = 12		# PS/2 mouse interrupt
-          end
-          device pnp 3f0.6 on		# Consumer IR
-          end
-          device pnp 3f0.7 on		# GPIO 1
-          end
-          device pnp 3f0.8 on		# GPIO 2
-          end
-          device pnp 3f0.a on		# ACPI
-          end
-        end
-      end
-      device pci 4.1 on	end		# IDE
-      device pci 4.2 on	end		# USB
-      device pci 4.3 on end		# ACPI
-      register "ide0_enable" = "1"
-      register "ide1_enable" = "1"
-      register "ide_legacy_enable" = "1"
-      # Enable UDMA/33 for higher speed if your IDE device(s) support it.
-      register "ide0_drive0_udma33_enable" = "0"
-      register "ide0_drive1_udma33_enable" = "0"
-      register "ide1_drive0_udma33_enable" = "0"
-      register "ide1_drive1_udma33_enable" = "0"
-    end
-  end
-end
diff --git a/src/mainboard/asus/p2b-f/Options.lb b/src/mainboard/asus/p2b-f/Options.lb
deleted file mode 100644
index 6884393..0000000
--- a/src/mainboard/asus/p2b-f/Options.lb
+++ /dev/null
@@ -1,97 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-
-default CONFIG_ROM_SIZE = 256 * 1024
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 7		# Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_VENDOR = "N/A"	# Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_PART_NUMBER = "N/A"	# Override this in targets/*/Config.lb.
-default CONFIG_ROM_IMAGE_SIZE = 36 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_HAVE_OPTION_TABLE = 0
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3			# 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_CONSOLE_VGA = 1
-default CONFIG_PCI_ROM_RUN = 1
-
-end
diff --git a/src/mainboard/asus/p2b/Config.lb b/src/mainboard/asus/p2b/Config.lb
deleted file mode 100644
index 559694d..0000000
--- a/src/mainboard/asus/p2b/Config.lb
+++ /dev/null
@@ -1,132 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE
-	object irq_tables.o
-end
-makerule ./failover.E
-	depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
-	action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
-	depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
-	action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
-	# depends	"$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
-	depends	"$(CONFIG_MAINBOARD)/auto.c ../romcc"
-	action	"../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
-	# depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
-	depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
-	action	"../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
-	mainboardinit cpu/x86/16bit/reset16.inc
-	ldscript /cpu/x86/16bit/reset16.lds
-else
-	mainboardinit cpu/x86/32bit/reset32.inc
-	ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
-	ldscript /arch/i386/lib/failover.lds
-	mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-dir /pc80
-config chip.h
-
-chip northbridge/intel/i440bx		# Northbridge
-  device apic_cluster 0 on		# APIC cluster
-    chip cpu/intel/slot_2		# CPU (FIXME: It's slot 1, actually)
-      device apic 0 on end		# APIC
-    end
-  end
-  device pci_domain 0 on		# PCI domain
-    device pci 0.0 on end		# Host bridge
-    device pci 1.0 on end		# PCI/AGP bridge
-    chip southbridge/intel/i82371eb	# Southbridge
-      device pci 4.0 on			# ISA bridge
-        chip superio/winbond/w83977tf	# Super I/O
-          device pnp 3f0.0 on		# Floppy
-            io 0x60 = 0x3f0
-            irq 0x70 = 6
-            drq 0x74 = 2
-          end
-          device pnp 3f0.1 on		# Parallel port
-            io 0x60 = 0x378
-            irq 0x70 = 7
-          end
-          device pnp 3f0.2 on		# COM1
-            io 0x60 = 0x3f8
-            irq 0x70 = 4
-          end
-          device pnp 3f0.3 on		# COM2 / IR
-            io 0x60 = 0x2f8
-            irq 0x70 = 3
-          end
-          device pnp 3f0.5 on		# PS/2 keyboard / mouse
-            io 0x60 = 0x60
-            io 0x62 = 0x64
-            irq 0x70 = 1		# PS/2 keyboard interrupt
-            irq 0x72 = 12		# PS/2 mouse interrupt
-          end
-          device pnp 3f0.7 on		# GPIO 1
-          end
-          device pnp 3f0.8 on		# GPIO 2
-          end
-          device pnp 3f0.9 on		# GPIO 3
-          end
-          device pnp 3f0.a on		# ACPI
-          end
-        end
-      end
-      device pci 4.1 on	end		# IDE
-      device pci 4.2 on	end		# USB
-      device pci 4.3 on end		# ACPI
-      register "ide0_enable" = "1"
-      register "ide1_enable" = "1"
-      register "ide_legacy_enable" = "1"
-      # Enable UDMA/33 for higher speed if your IDE device(s) support it.
-      register "ide0_drive0_udma33_enable" = "0"
-      register "ide0_drive1_udma33_enable" = "0"
-      register "ide1_drive0_udma33_enable" = "0"
-      register "ide1_drive1_udma33_enable" = "0"
-    end
-  end
-end
diff --git a/src/mainboard/asus/p2b/Options.lb b/src/mainboard/asus/p2b/Options.lb
deleted file mode 100644
index 0d1bb91..0000000
--- a/src/mainboard/asus/p2b/Options.lb
+++ /dev/null
@@ -1,98 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-
-default CONFIG_ROM_SIZE = 256 * 1024
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 6		# Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_VENDOR = "N/A"	# Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_PART_NUMBER = "N/A"	# Override this in targets/*/Config.lb.
-default CONFIG_ROM_IMAGE_SIZE = 36 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_HAVE_OPTION_TABLE = 0
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3			# 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_CONSOLE_VGA = 1
-default CONFIG_PCI_ROM_RUN = 1
-
-end
diff --git a/src/mainboard/asus/p3b-f/Config.lb b/src/mainboard/asus/p3b-f/Config.lb
deleted file mode 100644
index 628c413..0000000
--- a/src/mainboard/asus/p3b-f/Config.lb
+++ /dev/null
@@ -1,133 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-##
-
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 128 * 1024
-include /config/nofailovercalculation.lb
-default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1
-
-arch i386 end
-driver mainboard.o
-if CONFIG_GENERATE_PIRQ_TABLE
-	object irq_tables.o
-end
-makerule ./failover.E
-	depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
-	action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./failover.inc
-	depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
-	action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
-end
-makerule ./auto.E
-	# depends	"$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
-	depends	"$(CONFIG_MAINBOARD)/auto.c ../romcc"
-	action	"../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
-	# depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
-	depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
-	action	"../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
-end
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-if CONFIG_USE_FALLBACK_IMAGE
-	mainboardinit cpu/x86/16bit/reset16.inc
-	ldscript /cpu/x86/16bit/reset16.lds
-else
-	mainboardinit cpu/x86/32bit/reset32.inc
-	ldscript /cpu/x86/32bit/reset32.lds
-end
-mainboardinit arch/i386/lib/cpu_reset.inc
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-if CONFIG_USE_FALLBACK_IMAGE
-	ldscript /arch/i386/lib/failover.lds
-	mainboardinit ./failover.inc
-end
-mainboardinit cpu/x86/fpu_enable.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/mmx_disable.inc
-
-dir /pc80
-config chip.h
-
-# TODO
-chip northbridge/intel/i440bx		# Northbridge
-  device apic_cluster 0 on		# APIC cluster
-    chip cpu/intel/slot_2		# CPU (FIXME: It's slot 1, actually)
-      device apic 0 on end		# APIC
-    end
-  end
-  device pci_domain 0 on		# PCI domain
-    device pci 0.0 on end		# Host bridge
-    device pci 1.0 on end		# PCI/AGP bridge
-    chip southbridge/intel/i82371eb	# Southbridge
-      device pci 4.0 on			# ISA bridge
-        chip superio/winbond/w83977tf	# Super I/O (FIXME: It's W83977EF!)
-          device pnp 3f0.0 on		# Floppy
-            io 0x60 = 0x3f0
-            irq 0x70 = 6
-            drq 0x74 = 2
-          end
-          device pnp 3f0.1 on		# Parallel port
-            io 0x60 = 0x378
-            irq 0x70 = 7
-          end
-          device pnp 3f0.2 on		# COM1
-            io 0x60 = 0x3f8
-            irq 0x70 = 4
-          end
-          device pnp 3f0.3 on		# COM2 / IR
-            io 0x60 = 0x2f8
-            irq 0x70 = 3
-          end
-          device pnp 3f0.5 on		# PS/2 keyboard
-            io 0x60 = 0x60
-            io 0x62 = 0x64
-            irq 0x70 = 1		# PS/2 keyboard interrupt
-            irq 0x72 = 12		# PS/2 mouse interrupt
-          end
-          device pnp 3f0.6 on		# Consumer IR
-          end
-          device pnp 3f0.7 on		# GPIO 1
-          end
-          device pnp 3f0.8 on		# GPIO 2
-          end
-          device pnp 3f0.a on		# ACPI
-          end
-        end
-      end
-      device pci 4.1 on	end		# IDE
-      device pci 4.2 on	end		# USB
-      device pci 4.3 on end		# ACPI
-      register "ide0_enable" = "1"
-      register "ide1_enable" = "1"
-      register "ide_legacy_enable" = "1"
-      # Enable UDMA/33 for higher speed if your IDE device(s) support it.
-      register "ide0_drive0_udma33_enable" = "0"
-      register "ide0_drive1_udma33_enable" = "0"
-      register "ide1_drive0_udma33_enable" = "0"
-      register "ide1_drive1_udma33_enable" = "0"
-    end
-  end
-end
diff --git a/src/mainboard/asus/p3b-f/Options.lb b/src/mainboard/asus/p3b-f/Options.lb
deleted file mode 100644
index 1320c26..0000000
--- a/src/mainboard/asus/p3b-f/Options.lb
+++ /dev/null
@@ -1,97 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-##
-
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_GENERATE_PIRQ_TABLE
-uses CONFIG_USE_FALLBACK_IMAGE
-uses CONFIG_HAVE_FALLBACK_BOOT
-uses CONFIG_HAVE_HARD_RESET
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_USE_OPTION_TABLE
-uses CONFIG_ROM_PAYLOAD
-uses CONFIG_IRQ_SLOT_COUNT
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_ARCH
-uses CONFIG_FALLBACK_SIZE
-uses CONFIG_STACK_SIZE
-uses CONFIG_HEAP_SIZE
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_ROM_SECTION_SIZE
-uses CONFIG_ROM_SECTION_OFFSET
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_ROMBASE
-uses CONFIG_RAMBASE
-uses CONFIG_XIP_ROM_SIZE
-uses CONFIG_XIP_ROM_BASE
-uses CONFIG_GENERATE_MP_TABLE
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD
-uses CONFIG_TTYS0_BASE
-uses CONFIG_TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-
-default CONFIG_ROM_SIZE = 256 * 1024
-default CONFIG_HAVE_FALLBACK_BOOT = 1
-default CONFIG_GENERATE_MP_TABLE = 0
-default CONFIG_HAVE_HARD_RESET = 0
-default CONFIG_UDELAY_TSC = 1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
-default CONFIG_GENERATE_PIRQ_TABLE = 1
-default CONFIG_IRQ_SLOT_COUNT = 8		# Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_VENDOR = "N/A"	# Override this in targets/*/Config.lb.
-default CONFIG_MAINBOARD_PART_NUMBER = "N/A"	# Override this in targets/*/Config.lb.
-default CONFIG_ROM_IMAGE_SIZE = 36 * 1024
-default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
-default CONFIG_STACK_SIZE = 8 * 1024
-default CONFIG_HEAP_SIZE = 16 * 1024
-default CONFIG_HAVE_OPTION_TABLE = 0
-#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
-default CONFIG_USE_OPTION_TABLE = 0
-default CONFIG_RAMBASE = 0x00004000
-default CONFIG_ROM_PAYLOAD = 1
-default CONFIG_CROSS_COMPILE = ""
-default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
-default HOSTCC = "gcc"
-default CONFIG_CONSOLE_SERIAL8250 = 1
-default CONFIG_TTYS0_BAUD = 115200
-default CONFIG_TTYS0_BASE = 0x3f8
-default CONFIG_TTYS0_LCS = 0x3			# 8n1
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
-default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
-default CONFIG_CONSOLE_VGA = 1
-default CONFIG_PCI_ROM_RUN = 1
-
-end