diff options
author | Jonathan A. Kollasch <jakllsch@kollasch.net> | 2008-02-20 15:59:30 +0000 |
---|---|---|
committer | Stefan Reinauer <stepan@openbios.org> | 2008-02-20 15:59:30 +0000 |
commit | 8eff1e3d0419f42684fc8a63e1dd0a84eb7e9b50 (patch) | |
tree | dca773841df15fc251c324657ad2fa4855deb133 /src/mainboard/msi/ms7135 | |
parent | 787e4c9fd5d1d5306589df33328b35746e0cdb35 (diff) | |
download | coreboot-staging-8eff1e3d0419f42684fc8a63e1dd0a84eb7e9b50.zip coreboot-staging-8eff1e3d0419f42684fc8a63e1dd0a84eb7e9b50.tar.gz |
Initial support for MSI MS-7135 (K8N Neo3) mainboard.
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3111 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/mainboard/msi/ms7135')
-rw-r--r-- | src/mainboard/msi/ms7135/Config.lb | 306 | ||||
-rw-r--r-- | src/mainboard/msi/ms7135/Options.lb | 321 | ||||
-rw-r--r-- | src/mainboard/msi/ms7135/cache_as_ram_auto.c | 276 | ||||
-rw-r--r-- | src/mainboard/msi/ms7135/chip.h | 25 | ||||
-rw-r--r-- | src/mainboard/msi/ms7135/cmos.layout | 98 | ||||
-rw-r--r-- | src/mainboard/msi/ms7135/get_bus_conf.c | 127 | ||||
-rw-r--r-- | src/mainboard/msi/ms7135/irq_tables.c | 265 | ||||
-rw-r--r-- | src/mainboard/msi/ms7135/mainboard.c | 28 | ||||
-rw-r--r-- | src/mainboard/msi/ms7135/mptable.c | 221 |
9 files changed, 1667 insertions, 0 deletions
diff --git a/src/mainboard/msi/ms7135/Config.lb b/src/mainboard/msi/ms7135/Config.lb new file mode 100644 index 0000000..8bfd4c5 --- /dev/null +++ b/src/mainboard/msi/ms7135/Config.lb @@ -0,0 +1,306 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007 AMD +## (Written by Yinghai Lu <yinghailu@amd.com> for AMD) +## Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de> +## (Thanks to LSRA University of Mannheim for their support) +## Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +## +## Compute the location and size of where this firmware image +## (coreboot plus bootloader) will live in the boot rom chip. +## +if USE_FAILOVER_IMAGE + default ROM_SECTION_SIZE = FAILOVER_SIZE + default ROM_SECTION_OFFSET = (ROM_SIZE - FAILOVER_SIZE) +else + if USE_FALLBACK_IMAGE + default ROM_SECTION_SIZE = FALLBACK_SIZE + default ROM_SECTION_OFFSET = (ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE) + else + default ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE) + default ROM_SECTION_OFFSET = 0 + end +end + +## +## Compute the start location and size size of the coreboot bootloader. +## +default PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) + +## +## Compute where this copy of coreboot will start in the boot ROM. +## +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) + +## +## Compute a range of ROM that can be cached to speed up coreboot +## execution speed. +## +## XIP_ROM_SIZE must be a power of 2 (here 64 Kbyte) +## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE +## +default XIP_ROM_SIZE = (64 * 1024) + +if USE_FAILOVER_IMAGE + default XIP_ROM_BASE = (_ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE) +else + if USE_FALLBACK_IMAGE + default XIP_ROM_BASE = (_ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE + FAILOVER_SIZE) + else + default XIP_ROM_BASE = (_ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE) + end +end + +arch i386 end + +## +## Build the objects we have code for in this directory. +## + +driver mainboard.o + +#dir /drivers/ati/ragexl + +# Needed by irq_tables and mptable and acpi_tables. +object get_bus_conf.o + +if HAVE_MP_TABLE + object mptable.o +end + +if HAVE_PIRQ_TABLE + object irq_tables.o +end + +if USE_DCACHE_RAM + if CONFIG_USE_INIT + makerule ./auto.o + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@" + end + else + makerule ./auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" + end + end +end + +## +## Build our 16 bit and 32 bit coreboot entry code. +## +if HAVE_FAILOVER_BOOT + if USE_FAILOVER_IMAGE + mainboardinit cpu/x86/16bit/entry16.inc + ldscript /cpu/x86/16bit/entry16.lds + end +else + if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/entry16.inc + ldscript /cpu/x86/16bit/entry16.lds + end +end + +mainboardinit cpu/x86/32bit/entry32.inc + +if USE_DCACHE_RAM + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + ldscript /cpu/amd/car/cache_as_ram.lds + end +end + +## +## Build our reset vector (this is where coreboot is entered). +## +if HAVE_FAILOVER_BOOT + if USE_FAILOVER_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds + else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds + end +else + if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds + else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds + end +end + +if USE_DCACHE_RAM +else + ### Should this be in the northbridge code? + mainboardinit arch/i386/lib/cpu_reset.inc +end + +## +## Include an ID string (for safe flashing). +## +mainboardinit southbridge/nvidia/ck804/id.inc +ldscript /southbridge/nvidia/ck804/id.lds + +## +## ROMSTRAP table for CK804 +## +if HAVE_FAILOVER_BOOT + if USE_FAILOVER_IMAGE + mainboardinit southbridge/nvidia/ck804/romstrap.inc + ldscript /southbridge/nvidia/ck804/romstrap.lds + end +else + if USE_FALLBACK_IMAGE + mainboardinit southbridge/nvidia/ck804/romstrap.inc + ldscript /southbridge/nvidia/ck804/romstrap.lds + end +end + +if USE_DCACHE_RAM + ## + ## Setup Cache-As-Ram + ## + mainboardinit cpu/amd/car/cache_as_ram.inc +end + + +### +### This is the early phase of coreboot startup. +### Things are delicate and we test to see if we should +### failover to another image. +### +if HAVE_FAILOVER_BOOT + if USE_FAILOVER_IMAGE + if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover_failover.lds + end + end +else + if USE_FALLBACK_IMAGE + if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover.lds + end + end +end + +### +### O.k. We aren't just an intermediary anymore! +### + +## +## Setup RAM +## +if USE_DCACHE_RAM + if CONFIG_USE_INIT + initobject auto.o + else + mainboardinit ./auto.inc + end +end + +## +## Include the secondary configuration files +## +if CONFIG_CHIP_NAME + config chip.h +end + +chip northbridge/amd/amdk8/root_complex # Root complex + device apic_cluster 0 on # APIC cluster + chip cpu/amd/socket_754 # Socket 754 CPU + device apic 0 on end # APIC + end + end + + device pci_domain 0 on # PCI domain + chip northbridge/amd/amdk8 # mc0 + device pci 18.0 on # Northbridge + # Devices on link 0, link 0 == LDT 0 + chip southbridge/nvidia/ck804 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627thf # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 0 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off end # non-existant or undocumented + device pnp 2e.7 off end # Game, MIDI, GPIO 1, GPIO 5 + device pnp 2e.8 off end # GPIO 2 + device pnp 2e.9 off end # GPIO 3, GPIO 4 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # env monitor + io 0x60 = 0x290 + irq 0x70 = 0 + end + end + end + device pci 1.1 on end # SMbus + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # Onboard audio (ACI) + device pci 4.1 off end # Onboard modem (MCI) -- not wired out + device pci 6.0 on end # IDE + device pci 7.0 on end # SATA 1 + device pci 8.0 on end # SATA 0 + device pci 9.0 on end # PCI + device pci a.0 on end # NIC + device pci b.0 off end # PCI E 3 -- not wired out + device pci c.0 off end # PCI E 2 -- not wired out + device pci d.0 on end # PCI E 1 + device pci e.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + # register "mac_eeprom_smbus" = "3" + # register "mac_eeprom_addr" = "0x51" + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end +end diff --git a/src/mainboard/msi/ms7135/Options.lb b/src/mainboard/msi/ms7135/Options.lb new file mode 100644 index 0000000..81bdde0 --- /dev/null +++ b/src/mainboard/msi/ms7135/Options.lb @@ -0,0 +1,321 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de> +## (Thanks to LSRA University of Mannheim for their support) +## Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +uses HAVE_MP_TABLE +uses HAVE_PIRQ_TABLE +uses USE_FALLBACK_IMAGE +uses USE_FAILOVER_IMAGE +uses HAVE_FALLBACK_BOOT +uses HAVE_FAILOVER_BOOT +uses HAVE_HARD_RESET +uses IRQ_SLOT_COUNT +uses HAVE_OPTION_TABLE +uses CONFIG_MAX_CPUS +uses CONFIG_MAX_PHYSICAL_CPUS +uses CONFIG_LOGICAL_CPUS +uses CONFIG_IOAPIC +uses CONFIG_SMP +uses FALLBACK_SIZE +uses FAILOVER_SIZE +uses ROM_SIZE +uses ROM_SECTION_SIZE +uses ROM_IMAGE_SIZE +uses ROM_SECTION_SIZE +uses ROM_SECTION_OFFSET +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START +uses CONFIG_COMPRESSED_PAYLOAD_LZMA +uses PAYLOAD_SIZE +uses _ROMBASE +uses XIP_ROM_SIZE +uses XIP_ROM_BASE +uses STACK_SIZE +uses HEAP_SIZE +uses USE_OPTION_TABLE +uses LB_CKS_RANGE_START +uses LB_CKS_RANGE_END +uses LB_CKS_LOC +uses MAINBOARD_PART_NUMBER +uses MAINBOARD_VENDOR +uses MAINBOARD +uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses COREBOOT_EXTRA_VERSION +uses _RAMBASE +uses CONFIG_GDB_STUB +uses CROSS_COMPILE +uses CC +uses HOSTCC +uses OBJCOPY +uses TTYS0_BAUD +uses TTYS0_BASE +uses TTYS0_LCS +uses DEFAULT_CONSOLE_LOGLEVEL +uses MAXIMUM_CONSOLE_LOGLEVEL +uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_CONSOLE_SERIAL8250 +uses CONFIG_CONSOLE_BTEXT +uses HAVE_INIT_TIMER +uses CONFIG_GDB_STUB +uses CONFIG_CHIP_NAME +uses CONFIG_CONSOLE_VGA +uses CONFIG_PCI_ROM_RUN +uses HW_MEM_HOLE_SIZEK + +uses USE_DCACHE_RAM +uses DCACHE_RAM_BASE +uses DCACHE_RAM_SIZE +uses CONFIG_USE_INIT +uses DCACHE_RAM_GLOBAL_VAR_SIZE +uses CONFIG_AP_CODE_IN_CAR +uses MEM_TRAIN_SEQ +uses WAIT_BEFORE_CPUS_INIT + +uses ENABLE_APIC_EXT_ID +uses APIC_ID_OFFSET +uses LIFT_BSP_APIC_ID + +uses CONFIG_PCI_64BIT_PREF_MEM + +uses HT_CHAIN_UNITID_BASE +uses HT_CHAIN_END_UNITID_BASE +uses SB_HT_CHAIN_ON_BUS0 +uses SB_HT_CHAIN_UNITID_OFFSET_ONLY + +uses CONFIG_LB_MEM_TOPK + + +## ROM_SIZE is the size of boot ROM that this board will use. +## ---> 512 Kbytes +default ROM_SIZE=(512*1024) + +## +## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use +## +default FALLBACK_SIZE=(252*1024) + +#FAILOVER: 4K +default FAILOVER_SIZE=(4*1024) + +### +### Build options +### + +## +## Build code for the fallback boot +## +default HAVE_FALLBACK_BOOT=1 +default HAVE_FAILOVER_BOOT=1 + +## +## Build code to reset the motherboard from coreboot +## +default HAVE_HARD_RESET=1 + +## +## Build code to export a programmable irq routing table +## +default HAVE_PIRQ_TABLE=1 +default IRQ_SLOT_COUNT=13 + +## +## Build code to export an x86 MP table +## Useful for specifying IRQ routing values +## +default HAVE_MP_TABLE=1 + +## +## Build code to export a CMOS option table +## +default HAVE_OPTION_TABLE=1 + +## +## Move the default coreboot cmos range off of AMD RTC registers +## +default LB_CKS_RANGE_START=49 +default LB_CKS_RANGE_END=122 +default LB_CKS_LOC=123 + +## +## Build code for SMP support +## Only worry about 2 micro processors +## +default CONFIG_SMP=1 +default CONFIG_MAX_CPUS=2 +default CONFIG_MAX_PHYSICAL_CPUS=1 +default CONFIG_LOGICAL_CPUS=1 + +#1G memory hole +default HW_MEM_HOLE_SIZEK=0x100000 + +##HT Unit ID offset, default is 1, the typical one +default HT_CHAIN_UNITID_BASE=0 + +##real SB Unit ID, default is 0x20, mean dont touch it at last +#default HT_CHAIN_END_UNITID_BASE=0x10 + +#make the SB HT chain on bus 0, default is not (0) +default SB_HT_CHAIN_ON_BUS0=2 + +##only offset for SB chain?, default is yes(1) +default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 + +#BTEXT Console +#default CONFIG_CONSOLE_BTEXT=1 + +#VGA Console +default CONFIG_CONSOLE_VGA=1 +default CONFIG_PCI_ROM_RUN=1 + +## +## enable CACHE_AS_RAM specifics +## +default USE_DCACHE_RAM=1 +#default DCACHE_RAM_BASE=0xcf000 +#default DCACHE_RAM_SIZE=0x1000 +default DCACHE_RAM_BASE=0xc8000 +default DCACHE_RAM_SIZE=0x08000 +default DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000 +default CONFIG_USE_INIT=0 + +default CONFIG_AP_CODE_IN_CAR=0 +default MEM_TRAIN_SEQ=2 +default WAIT_BEFORE_CPUS_INIT=0 + +## APIC stuff +#default ENABLE_APIC_EXT_ID=0 +#default APIC_ID_OFFSET=0x10 +#default LIFT_BSP_APIC_ID=0 + + +#default CONFIG_PCI_64BIT_PREF_MEM=1 + +## +## Build code to setup a generic IOAPIC +## +default CONFIG_IOAPIC=1 + +## +## Clean up the motherboard id strings +## +default MAINBOARD_PART_NUMBER="K8N Neo3 (MS-7135)" +default MAINBOARD_VENDOR="MSI" +default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1462 +default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x7135 + +### +### coreboot layout values +### + +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. +default ROM_IMAGE_SIZE = (64*1024) +#65536 + +## +## Use a small 8K stack +## +default STACK_SIZE=0x2000 + +## +## Use a small 16K heap +## +default HEAP_SIZE=0x4000 + +## +## Only use the option table in a normal image +## +#efault USE_OPTION_TABLE = !USE_FALLBACK_IMAGE +default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE ) + +## +## coreboot C code runs at this location in RAM +## +default _RAMBASE=0x00004000 + +## +## Load the payload from the ROM +## +default CONFIG_ROM_PAYLOAD = 1 + +### +### Defaults of options that you may want to override in the target config file +### + +## +## The default compiler +## +default CC="$(CROSS_COMPILE)gcc -m32" +default HOSTCC="gcc" + +## +## Disable the gdb stub by default +## +default CONFIG_GDB_STUB=0 + +## +## The Serial Console +## + +# To Enable the Serial Console +default CONFIG_CONSOLE_SERIAL8250=1 + +## Select the serial console baud rate +default TTYS0_BAUD=115200 +#default TTYS0_BAUD=57600 +#default TTYS0_BAUD=38400 +#default TTYS0_BAUD=19200 +#default TTYS0_BAUD=9600 +#default TTYS0_BAUD=4800 +#default TTYS0_BAUD=2400 +#default TTYS0_BAUD=1200 + +# Select the serial console base port +default TTYS0_BASE=0x3f8 + +# Select the serial protocol +# This defaults to 8 data bits, 1 stop bit, and no parity +default TTYS0_LCS=0x3 + +## +### Select the coreboot loglevel +## +## EMERG 1 system is unusable +## ALERT 2 action must be taken immediately +## CRIT 3 critical conditions +## ERR 4 error conditions +## WARNING 5 warning conditions +## NOTICE 6 normal but significant condition +## INFO 7 informational +## DEBUG 8 debug-level messages +## SPEW 9 Way too many details + +## Request this level of debugging output +default DEFAULT_CONSOLE_LOGLEVEL=8 +## At a maximum only compile in this level of debugging +default MAXIMUM_CONSOLE_LOGLEVEL=8 + +## +## Select power on after power fail setting +default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" + +### End Options.lb +end diff --git a/src/mainboard/msi/ms7135/cache_as_ram_auto.c b/src/mainboard/msi/ms7135/cache_as_ram_auto.c new file mode 100644 index 0000000..d0f7488 --- /dev/null +++ b/src/mainboard/msi/ms7135/cache_as_ram_auto.c @@ -0,0 +1,276 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * (Written by Yinghai Lu <yinghailu@amd.com> for AMD) + * Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de> + * (Thanks to LSRA University of Mannheim for their support) + * Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define ASSEMBLY 1 +#define __ROMCC__ + +#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + +/* Used by raminit. */ +#define QRANK_DIMM_SUPPORT 1 + +/* Turn this on for SMBus debugging output. */ +#define DEBUG_SMBUS 0 + +#if CONFIG_LOGICAL_CPUS == 1 +#define SET_NB_CFG_54 1 +#endif + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "superio/winbond/w83627hf/w83627hf_early_serial.c" + +#if USE_FAILOVER_IMAGE == 0 + +/* Used by ck804_early_setup(). */ +#define CK804_NUM 1 +#define CK804_USE_NIC 1 +#define CK804_USE_ACI 1 + +#if CONFIG_USE_INIT == 0 +#include "lib/memcpy.c" +#endif + +#include <cpu/amd/model_fxx_rev.h> +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "southbridge/nvidia/ck804/ck804_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#include "lib/delay.c" +#include "northbridge/amd/amdk8/debug.c" +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "cpu/x86/bist.h" +#include "northbridge/amd/amdk8/setup_resource_map.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "cpu/amd/dualcore/dualcore.c" + +static void memreset_setup(void) +{ + /* FIXME: Nothing to do? */ +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ + /* FIXME: Nothing to do? */ +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ + /* FIXME: Nothing to do? */ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/raminit.c" +#include "sdram/generic_sdram.c" +#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h" +#include "southbridge/nvidia/ck804/ck804_early_setup_car.c" +#include "cpu/amd/car/copy_and_run.c" +#include "cpu/amd/car/post_cache_as_ram.c" +#include "cpu/amd/model_fxx/init_cpus.c" + +#endif /* USE_FAILOVER_IMAGE */ + +#if ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE == 1)) \ + || ((HAVE_FAILOVER_BOOT==0) && (USE_FALLBACK_IMAGE == 1)) + +#include "southbridge/nvidia/ck804/ck804_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" + +static void sio_setup(void) +{ + unsigned value; + uint32_t dword; + uint8_t byte; + + /* Subject decoding */ + byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0x7b, byte); + + /* LPC Positive Decode 0 */ + dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0xa0); + /* Serial 0, Serial 1 */ + dword |= (1 << 0) | (1 << 1); + pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0xa0, dword); +} + +void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) +{ + unsigned last_boot_normal_x = last_boot_normal(); + + /* Is this a CPU only reset? Or is this a secondary CPU? */ + if ((cpu_init_detectedx) || (!boot_cpu())) { + if (last_boot_normal_x) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the ck804 */ + ck804_enable_rom(); + + /* Is this a deliberate reset by the BIOS? */ + if (bios_reset_detected() && last_boot_normal_x) { + goto normal_image; + } + + /* This is the primary CPU. How should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } else { + goto fallback_image; + } + +normal_image: + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + :"a" (bist), "b"(cpu_init_detectedx) /* inputs */ + ); + +fallback_image: + +#if HAVE_FAILOVER_BOOT == 1 + __asm__ volatile ("jmp __fallback_image" + : /* outputs */ + :"a" (bist), "b"(cpu_init_detectedx) /* inputs */ + ) +#endif + ; +} + +#endif /* ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE == 1)) ... */ + +void real_main(unsigned long bist, unsigned long cpu_init_detectedx); + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ +#if HAVE_FAILOVER_BOOT == 1 +#if USE_FAILOVER_IMAGE == 1 + failover_process(bist, cpu_init_detectedx); +#else + real_main(bist, cpu_init_detectedx); +#endif +#else +#if USE_FALLBACK_IMAGE == 1 + failover_process(bist, cpu_init_detectedx); +#endif + real_main(bist, cpu_init_detectedx); +#endif +} + +#if USE_FAILOVER_IMAGE == 0 +void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const uint16_t spd_addr[] = { + (0xa << 3) | 0, (0xa << 3) | 1, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + }; + + int needs_reset; + unsigned bsp_apicid = 0; + + struct mem_controller ctrl[8]; + unsigned nodes; + + if (bist == 0) { + bsp_apicid = init_cpus(cpu_init_detectedx); + } + + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 0)); +#endif + + needs_reset = setup_coherent_ht_domain(); + + wait_all_core0_started(); +#if CONFIG_LOGICAL_CPUS==1 + // It is said that we should start core1 after all core0 launched + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); +#endif + + needs_reset |= ht_setup_chains_x(); + + needs_reset |= ck804_early_setup_x(); + + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } + + allow_all_aps_stop(bsp_apicid); + + nodes = get_nodes(); + //It's the time to set ctrl now; + fill_mem_ctrl(nodes, ctrl, spd_addr); + + enable_smbus(); + +#if 0 + dump_spd_registers(&ctrl[0]); + dump_smbus_registers(); +#endif + + memreset_setup(); + sdram_initialize(nodes, ctrl); + +#if 0 + print_pci_devices(); + dump_pci_devices(); +#endif + + post_cache_as_ram(); +} +#endif /* USE_FAILOVER_IMAGE */ diff --git a/src/mainboard/msi/ms7135/chip.h b/src/mainboard/msi/ms7135/chip.h new file mode 100644 index 0000000..024971b --- /dev/null +++ b/src/mainboard/msi/ms7135/chip.h @@ -0,0 +1,25 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +extern struct chip_operations mainboard_msi_ms7135_ops; + +struct mainboard_ms7135_config { + int nothing; +}; diff --git a/src/mainboard/msi/ms7135/cmos.layout b/src/mainboard/msi/ms7135/cmos.layout new file mode 100644 index 0000000..3f6d68f --- /dev/null +++ b/src/mainboard/msi/ms7135/cmos.layout @@ -0,0 +1,98 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 dual_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 reserved_memory + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 + + diff --git a/src/mainboard/msi/ms7135/get_bus_conf.c b/src/mainboard/msi/ms7135/get_bus_conf.c new file mode 100644 index 0000000..e2f868e --- /dev/null +++ b/src/mainboard/msi/ms7135/get_bus_conf.c @@ -0,0 +1,127 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * (Written by Yinghai Lu <yinghailu@amd.com> for AMD) + * Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de> + * (Thanks to LSRA University of Mannheim for their support) + * Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS == 1 +#include <cpu/amd/dualcore.h> +#endif + +#include <cpu/amd/amdk8_sysconf.h> + +/* Global variables for MB layouts and these will be shared by irqtable, + * mptable and acpi_tables. + */ +/* busnum is default */ +unsigned char bus_isa; +unsigned char bus_ck804[6]; +unsigned apicid_ck804; + +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, //no HTIO for ms7135 +}; +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + 0x20202020, //ms7135 has only one ht-chain +}; +unsigned bus_type[256]; + +extern void get_sblk_pci1234(void); + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + unsigned apicid_base; + + device_t dev; + unsigned sbdn; + int i, j; + + if (get_bus_conf_done == 1) + return; //do it only once + + get_bus_conf_done = 1; + + sysconf.hc_possible_num = sizeof(pci1234x) / sizeof(pci1234x[0]); + sysconf.hc_possible_num = sizeof(pci1234x) / sizeof(pci1234x[0]); + for (i = 0; i < sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_sblk_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain + sbdn = sysconf.sbdn; + + for (i = 0; i < 6; i++) { + bus_ck804[i] = 0; + } + + for (i = 0; i < 256; i++) { + bus_type[i] = 0; + } + + bus_type[0] = 1; //pci + + bus_ck804[0] = (sysconf.pci1234[0] >> 16) & 0xff; + + bus_type[bus_ck804[0]] = 1; + + /* CK804 */ + int dn = -1; + for (i = 1; i < 4; i++) { + switch (i) { + case 1: dn = 9; break; + case 2: dn = 13; break; + case 3: dn = 14; break; + default: dn = -1; break; + } + dev = dev_find_slot(bus_ck804[0], PCI_DEVFN(sbdn + dn, 0)); + if (dev) { + bus_ck804[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + for (j = bus_ck804[i]; j < bus_isa; j++) + bus_type[j] = 1; + } else { + printk_debug + ("ERROR - could not find PCI %02x:%02x.0, using defaults\n", + bus_ck804[0], sbdn + dn); + bus_isa = bus_ck804[i - 1] + 1; + } + } + +/*I/O APICs: APIC ID Version State Address*/ +#if CONFIG_LOGICAL_CPUS==1 + apicid_base = get_apicid_base(3); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_ck804 = apicid_base + 0; +} diff --git a/src/mainboard/msi/ms7135/irq_tables.c b/src/mainboard/msi/ms7135/irq_tables.c new file mode 100644 index 0000000..f8d47d6 --- /dev/null +++ b/src/mainboard/msi/ms7135/irq_tables.c @@ -0,0 +1,265 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * (Written by Yinghai Lu <yinghailu@amd.com> for AMD) + * Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de> + * (Thanks to LSRA University of Mannheim for their support) + * Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Documentation at: http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM */ + +/* This is probably not right, feel free to fix this if you don't want + * to use the mptable. + */ + +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> +#include <cpu/amd/amdk8_sysconf.h> + +extern unsigned char bus_isa; +extern unsigned char bus_ck804[6]; +extern void get_bus_conf(void); + +/** + * Add one line to IRQ table. + */ +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, + uint8_t devfn, uint8_t link0, uint16_t bitmap0, + uint8_t link1, uint16_t bitmap1, uint8_t link2, + uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, + uint8_t slot, uint8_t rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + +void pci_assign_irqs(unsigned, unsigned, const unsigned char *); + +/** + * Create the IRQ routing table. + * Values are derived from getpir generated code. + */ +unsigned long write_pirq_routing_table(unsigned long addr) +{ + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + unsigned slot_num; + uint8_t *v; + + uint8_t sum = 0; + int i; + unsigned sbdn; + + /* get_bus_conf() will find out all bus num and apic that share with + * mptable.c and mptable.c + */ + get_bus_conf(); + sbdn = sysconf.sbdn; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be betweeen 0xf0000 & 0x100000 */ + printk_info("Writing IRQ routing tables to 0x%x...", addr); + + pirq = (void *)(addr); + v = (uint8_t *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_ck804[0]; + pirq->rtr_devfn = ((sbdn + 9) << 3) | 0; + + pirq->exclusive_irqs = 0x828; + + pirq->rtr_vendor = 0x10de; + pirq->rtr_device = 0x005c; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + +//Slot1 PCIE 16x + write_pirq_info(pirq_info, bus_ck804[1], (0 << 3) | 0, 0x3, 0xdeb8, 0x4, + 0xdeb8, 0x1, 0xdeb8, 0x2, 0xdeb8, 4, 0); + pirq_info++; + slot_num++; + +//Slot2 PCIE 1x + write_pirq_info(pirq_info, bus_ck804[2], (0 << 3) | 0, 0x4, 0xdeb8, 0x1, + 0xdeb8, 0x2, 0xdeb8, 0x3, 0xdeb8, 5, 0); + pirq_info++; + slot_num++; + +//Slot3 PCIE 1x + write_pirq_info(pirq_info, bus_ck804[3], (0 << 3) | 0, 0x1, 0xdeb8, 0x2, + 0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 6, 0); + pirq_info++; + slot_num++; + +//Slot4 PCIE 4x + write_pirq_info(pirq_info, bus_ck804[4], (0x4 << 3) | 0, + 0x2, 0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 0x1, 0xdeb8, + 7, 0); + pirq_info++; + slot_num++; + +//Slot5 - 7 PCI + for (i = 0; i < 3; i++) { + write_pirq_info(pirq_info, bus_ck804[5], (0 << (6 + i)) | 0, + ((i + 0) % 4) + 1, 0xdeb8, + ((i + 1) % 4) + 1, 0xdeb8, + ((i + 2) % 4) + 1, 0xdeb8, + ((i + 3) % 4) + 1, 0xdeb8, i, 0); + pirq_info++; + slot_num++; + } + +//pci bridge + write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 9) << 3) | 0, 0x1, + 0xdeb8, 0x2, 0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 0, 0); + pirq_info++; + slot_num++; + +//smbus + write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 1) << 3) | 0, 0x2, + 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; + slot_num++; + +//usb + write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 2) << 3) | 0, 0x1, + 0xdeb8, 0x2, 0xdeb8, 0, 0, 0, 0, 0, 0); + pirq_info++; + slot_num++; + +//audio + write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 4) << 3) | 0, 0x1, + 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; + slot_num++; +//sata + write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 7) << 3) | 0, 0x1, + 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; + slot_num++; +//sata + write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 8) << 3) | 0, 0x1, + 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; + slot_num++; +//nic + write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 0xa) << 3) | 0, 0x1, + 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; + slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk_info("done.\n"); + +#if 0 + unsigned char irq[4]; + irq[0] = 0; + irq[1] = 0; + irq[2] = 0; + irq[3] = 0; + + /* Bus, device, slots IRQs for {A,B,C,D}. */ + + irq[0] = 10; /* SMBus */ /* test me */ + pci_assign_irqs(bus_ck804[0], 1, irq); + + irq[0] = 10; /* USB */ + irq[1] = 10; + pci_assign_irqs(bus_ck804[0], 2, irq); + + irq[0] = 10; /* AC97 */ + irq[1] = 0; + pci_assign_irqs(bus_ck804[0], 4, irq); + + irq[0] = 11; /* SATA */ + pci_assign_irqs(bus_ck804[0], 7, irq); + + irq[0] = 5; /* SATA */ + pci_assign_irqs(bus_ck804[0], 8, irq); + + irq[0] = 10; /* Ethernet */ + pci_assign_irqs(bus_ck804[0], 10, irq); + + + /* physical slots */ + + irq[0] = 5; /* PCI E1 - x1 */ + pci_assign_irqs(bus_ck804[2], 0, irq); + + irq[0] = 11; /* PCI E2 - x16 */ + pci_assign_irqs(bus_ck804[3], 0, irq); + + /* AGP-on-PCI "AGR" ignored */ + + irq[0] = 10; /* PCI1 */ + irq[1] = 11; + irq[2] = 5; + irq[3] = 0; + pci_assign_irqs(bus_ck804[1], 7, irq); + + irq[0] = 11; /* PCI2 */ + irq[1] = 10; + irq[2] = 5; + irq[3] = 0; + pci_assign_irqs(bus_ck804[1], 8, irq); + + irq[0] = 5; /* PCI3 */ + irq[1] = 10; + irq[2] = 11; + irq[3] = 0; + pci_assign_irqs(bus_ck804[1], 9, irq); +#endif + + return (unsigned long)pirq_info; +} diff --git a/src/mainboard/msi/ms7135/mainboard.c b/src/mainboard/msi/ms7135/mainboard.c new file mode 100644 index 0000000..32784b0 --- /dev/null +++ b/src/mainboard/msi/ms7135/mainboard.c @@ -0,0 +1,28 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/device.h> +#include "chip.h" + +#if CONFIG_CHIP_NAME == 1 +struct chip_operations mainboard_msi_ms7135_ops = { + CHIP_NAME("MSI MS7135 Mainboard") +}; +#endif diff --git a/src/mainboard/msi/ms7135/mptable.c b/src/mainboard/msi/ms7135/mptable.c new file mode 100644 index 0000000..97b3db1 --- /dev/null +++ b/src/mainboard/msi/ms7135/mptable.c @@ -0,0 +1,221 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 AMD + * (Written by Yinghai Lu <yinghailu@amd.com> for AMD) + * Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de> + * (Thanks to LSRA University of Mannheim for their support) + * Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> + +#include <cpu/amd/amdk8_sysconf.h> + +extern unsigned char bus_isa; +extern unsigned char bus_ck804[6]; +extern unsigned apicid_ck804; + +extern unsigned bus_type[256]; + +extern void get_bus_conf(void); + +void *smp_write_config_table(void *v) +{ + static const char sig[4] = "PCMP"; + static const char oem[8] = "MSI "; + static const char productid[12] = "MS7135 "; + struct mp_config_table *mc; + unsigned sbdn; + + int bus_num; + int i; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + memset(mc, 0, sizeof(*mc)); + + memcpy(mc->mpc_signature, sig, sizeof(sig)); + mc->mpc_length = sizeof(*mc); /* initially just the header */ + mc->mpc_spec = 0x04; + mc->mpc_checksum = 0; /* not yet computed */ + memcpy(mc->mpc_oem, oem, sizeof(oem)); + memcpy(mc->mpc_productid, productid, sizeof(productid)); + mc->mpc_oemptr = 0; + mc->mpc_oemsize = 0; + mc->mpc_entry_count = 0; /* No entries yet... */ + mc->mpc_lapic = LAPIC_ADDR; + mc->mpe_length = 0; + mc->mpe_checksum = 0; + mc->reserved = 0; + + smp_write_processors(mc); + + get_bus_conf(); + sbdn = sysconf.sbdn; + +/* Bus: Bus ID Type*/ + /* define numbers for pci and isa bus */ + for (bus_num = 0; bus_num < 256; bus_num++) { + if (bus_type[bus_num]) + smp_write_bus(mc, bus_num, "PCI "); + } + smp_write_bus(mc, bus_isa, "ISA "); + + +/* I/O APICs: APIC ID Version State Address*/ + { + device_t dev; + struct resource *res; + uint32_t dword; + + dev = dev_find_slot(bus_ck804[0], PCI_DEVFN(sbdn + 0x1, 0)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_1); + if (res) { + smp_write_ioapic(mc, apicid_ck804, 0x11, + res->base); + } + + /* Initialize interrupt mapping */ + + /* copied from stock bios */ + /*0x01800500,0x1800d509,0x00520d08*/ + + /* if this register is what i think it is ... */ + dword = 0x08d0d218; + pci_write_config32(dev, 0x7c, dword); + + dword = 0x8d001509; + pci_write_config32(dev, 0x80, dword); + + dword = 0x00010271; + pci_write_config32(dev, 0x84, dword); + + } + } + + /* Now, assemble the table. */ + + smp_write_intsrc(mc, mp_ExtINT, + MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, + bus_isa, 0x0, apicid_ck804, 0x0); + +#define ISA_INT(intr, pin) \ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, \ + bus_isa, (intr), apicid_ck804, (pin)) + + ISA_INT(1, 1); + ISA_INT(0, 2); + ISA_INT(3, 3); + ISA_INT(4, 4); + + ISA_INT(6, 6); + ISA_INT(7, 7); + ISA_INT(8, 8); + ISA_INT(9, 9); + + ISA_INT(0xc, 0xc); + ISA_INT(0xd, 0xd); + ISA_INT(0xe, 0xe); + ISA_INT(0xf, 0xf); + +#define PCI_INT(bus, dev, fn, pin) \ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, \ + bus_ck804[bus], (((dev)<<2)|(fn)), apicid_ck804, (pin)) + +#if 0 + // Onboard ck804 smbus + PCI_INT(0, sbdn+1, 1, 10); /* (this seems odd, how to test?) */ + +#endif + // Onboard ck804 USB + PCI_INT(0, sbdn+2, 0, 23); + PCI_INT(0, sbdn+2, 1, 23); + + // Onboard ck804 AC-97 + PCI_INT(0, sbdn+4, 0, 23); + + // Onboard ck804 SATA 0 + PCI_INT(0, sbdn+7, 0, 20); + + // Onboard ck804 SATA 1 + PCI_INT(0, sbdn+8, 0, 21); + + // Onboard ck804 NIC + PCI_INT(0, sbdn+10, 0, 22); + + + /* legacy PCI */ + PCI_INT(1, 7, 0, 17); + PCI_INT(1, 7, 1, 18); + PCI_INT(1, 7, 2, 19); + PCI_INT(1, 7, 3, 16); + + PCI_INT(1, 8, 0, 18); + PCI_INT(1, 8, 1, 19); + PCI_INT(1, 8, 2, 16); + PCI_INT(1, 8, 3, 17); + + PCI_INT(1, 9, 0, 19); + PCI_INT(1, 9, 1, 16); + PCI_INT(1, 9, 2, 17); + PCI_INT(1, 9, 3, 18); + + + /* PCI-E x1 port */ + PCI_INT(2, 0, 0, 19); + /* XXX guesses */ + PCI_INT(2, 0, 1, 16); + PCI_INT(2, 9, 2, 17); + PCI_INT(2, 9, 3, 18); + + /* PCI-E x16 port */ /* XXX fix me ? */ + PCI_INT(3, 0, 0, 18); + /* XXX guesses */ + PCI_INT(3, 0, 1, 19); + PCI_INT(3, 0, 2, 16); + PCI_INT(3, 0, 3, 17); + +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ + smp_write_lintsrc(mc, mp_ExtINT, + MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, + bus_ck804[0], 0x0, MP_APIC_ALL, 0x0); + smp_write_lintsrc(mc, mp_NMI, + MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT, + bus_ck804[0], 0x0, MP_APIC_ALL, 0x1); + + /* There is no extension information... */ + + /* Compute the checksums */ + mc->mpe_checksum = + smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); + mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); + printk_debug("Wrote the mp table end at: %p - %p\n", + mc, smp_next_mpe_entry(mc)); + return smp_next_mpe_entry(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr); + return (unsigned long)smp_write_config_table(v); +} |