diff options
author | Stefan Reinauer <stepan@coresystems.de> | 2009-06-30 15:17:49 +0000 |
---|---|---|
committer | Stefan Reinauer <stepan@openbios.org> | 2009-06-30 15:17:49 +0000 |
commit | 0867062412dd4bfe5a556e5f3fd85ba5b682d79b (patch) | |
tree | 81ca5db12b8567b48daaa23a541bfb8a5dc011f8 /src/mainboard/hp | |
parent | 9702b6bf7ec5a4fb16934f1cf2724480e2460c89 (diff) | |
download | coreboot-staging-0867062412dd4bfe5a556e5f3fd85ba5b682d79b.zip coreboot-staging-0867062412dd4bfe5a556e5f3fd85ba5b682d79b.tar.gz |
This patch unifies the use of config options in v2 to all start with CONFIG_
It's basically done with the following script and some manual fixup:
VARS=`grep ^define src/config/Options.lb | cut -f2 -d\ | grep -v ^CONFIG | grep -v ^COREBOOT |grep -v ^CC`
for VAR in $VARS; do
find . -name .svn -prune -o -type f -exec perl -pi -e "s/(^|[^0-9a-zA-Z_]+)$VAR($|[^0-9a-zA-Z_]+)/\1CONFIG_$VAR\2/g" {} \;
done
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/mainboard/hp')
-rw-r--r-- | src/mainboard/hp/dl145_g3/Config.lb | 22 | ||||
-rw-r--r-- | src/mainboard/hp/dl145_g3/Options.lb | 224 | ||||
-rw-r--r-- | src/mainboard/hp/dl145_g3/cache_as_ram_auto.c | 24 | ||||
-rw-r--r-- | src/mainboard/hp/dl145_g3/get_bus_conf.c | 4 |
4 files changed, 137 insertions, 137 deletions
diff --git a/src/mainboard/hp/dl145_g3/Config.lb b/src/mainboard/hp/dl145_g3/Config.lb index f493dda..12ea977 100644 --- a/src/mainboard/hp/dl145_g3/Config.lb +++ b/src/mainboard/hp/dl145_g3/Config.lb @@ -25,8 +25,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -## XIP_ROM_SIZE must be a power of 2. -default XIP_ROM_SIZE = 64 * 1024 +## CONFIG_XIP_ROM_SIZE must be a power of 2. +default CONFIG_XIP_ROM_SIZE = 64 * 1024 include /config/nofailovercalculation.lb arch i386 end @@ -40,18 +40,18 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if HAVE_MP_TABLE object mptable.o end -if HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_HAVE_MP_TABLE object mptable.o end +if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end if CONFIG_USE_INIT makerule ./auto.o - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" end else makerule ./auto.inc - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" action "perl -e 's/\.rodata/.rom.data/g' -pi $@" action "perl -e 's/\.text/.section .rom.text/g' -pi $@" end @@ -60,7 +60,7 @@ end ## ## Build our 16 bit and 32 bit coreboot entry code ## -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc ldscript /cpu/x86/16bit/entry16.lds end @@ -78,7 +78,7 @@ mainboardinit cpu/x86/32bit/entry32.inc ## ## Build our reset vector (This is where coreboot is entered) ## -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc ldscript /cpu/x86/16bit/reset16.lds else @@ -102,7 +102,7 @@ ldscript /arch/i386/lib/id.lds ### Things are delicate and we test to see if we should ### failover to another image. ### -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE ldscript /arch/i386/lib/failover.lds end diff --git a/src/mainboard/hp/dl145_g3/Options.lb b/src/mainboard/hp/dl145_g3/Options.lb index a66c599..283e37a 100644 --- a/src/mainboard/hp/dl145_g3/Options.lb +++ b/src/mainboard/hp/dl145_g3/Options.lb @@ -24,84 +24,84 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses HAVE_MP_TABLE -uses HAVE_PIRQ_TABLE -uses HAVE_ACPI_TABLES -uses ACPI_SSDTX_NUM -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_HARD_RESET -uses IRQ_SLOT_COUNT -uses HAVE_OPTION_TABLE +uses CONFIG_HAVE_MP_TABLE +uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_ACPI_SSDTX_NUM +uses CONFIG_USE_FALLBACK_IMAGE +uses CONFIG_HAVE_FALLBACK_BOOT +uses CONFIG_HAVE_HARD_RESET +uses CONFIG_IRQ_SLOT_COUNT +uses CONFIG_HAVE_OPTION_TABLE uses CONFIG_MAX_CPUS uses CONFIG_MAX_PHYSICAL_CPUS uses CONFIG_LOGICAL_CPUS uses CONFIG_IOAPIC uses CONFIG_SMP -uses FALLBACK_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET +uses CONFIG_FALLBACK_SIZE +uses CONFIG_ROM_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_IMAGE_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_SECTION_OFFSET uses CONFIG_ROM_PAYLOAD uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses CONFIG_PRECOMPRESSED_PAYLOAD -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses STACK_SIZE -uses HEAP_SIZE -uses USE_OPTION_TABLE -uses LB_CKS_RANGE_START -uses LB_CKS_RANGE_END -uses LB_CKS_LOC -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses MAINBOARD -uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses CONFIG_PAYLOAD_SIZE +uses CONFIG_ROMBASE +uses CONFIG_XIP_ROM_SIZE +uses CONFIG_XIP_ROM_BASE +uses CONFIG_STACK_SIZE +uses CONFIG_HEAP_SIZE +uses CONFIG_USE_OPTION_TABLE +uses CONFIG_LB_CKS_RANGE_START +uses CONFIG_LB_CKS_RANGE_END +uses CONFIG_LB_CKS_LOC +uses CONFIG_MAINBOARD_PART_NUMBER +uses CONFIG_MAINBOARD_VENDOR +uses CONFIG_MAINBOARD +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID uses COREBOOT_EXTRA_VERSION -uses _RAMBASE -uses TTYS0_BAUD -uses TTYS0_BASE -uses TTYS0_LCS -uses DEFAULT_CONSOLE_LOGLEVEL -uses MAXIMUM_CONSOLE_LOGLEVEL -uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_RAMBASE +uses CONFIG_TTYS0_BAUD +uses CONFIG_TTYS0_BASE +uses CONFIG_TTYS0_LCS +uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL +uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL uses CONFIG_CONSOLE_SERIAL8250 -uses HAVE_INIT_TIMER +uses CONFIG_HAVE_INIT_TIMER uses CONFIG_GDB_STUB uses CONFIG_GDB_STUB -uses CROSS_COMPILE +uses CONFIG_CROSS_COMPILE uses CC -uses HOSTCC -uses OBJCOPY +uses CONFIG_HOSTCC +uses CONFIG_OBJCOPY uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses HW_MEM_HOLE_SIZEK -uses HW_MEM_HOLE_SIZE_AUTO_INC -uses K8_HT_FREQ_1G_SUPPORT +uses CONFIG_HW_MEM_HOLE_SIZEK +uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC +uses CONFIG_K8_HT_FREQ_1G_SUPPORT uses CONFIG_CBFS -uses HT_CHAIN_UNITID_BASE -uses HT_CHAIN_END_UNITID_BASE -uses SB_HT_CHAIN_ON_BUS0 -uses SB_HT_CHAIN_UNITID_OFFSET_ONLY +uses CONFIG_HT_CHAIN_UNITID_BASE +uses CONFIG_HT_CHAIN_END_UNITID_BASE +uses CONFIG_SB_HT_CHAIN_ON_BUS0 +uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY -uses USE_DCACHE_RAM -uses DCACHE_RAM_BASE -uses DCACHE_RAM_SIZE -uses DCACHE_RAM_GLOBAL_VAR_SIZE +uses CONFIG_USE_DCACHE_RAM +uses CONFIG_DCACHE_RAM_BASE +uses CONFIG_DCACHE_RAM_SIZE +uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE uses CONFIG_USE_INIT -uses SERIAL_CPU_INIT +uses CONFIG_SERIAL_CPU_INIT -uses ENABLE_APIC_EXT_ID -uses APIC_ID_OFFSET -uses LIFT_BSP_APIC_ID +uses CONFIG_ENABLE_APIC_EXT_ID +uses CONFIG_APIC_ID_OFFSET +uses CONFIG_LIFT_BSP_APIC_ID uses CONFIG_PCI_64BIT_PREF_MEM @@ -114,14 +114,14 @@ uses CONFIG_USE_PRINTK_IN_CAR ### ## -## ROM_SIZE is the size of boot ROM that this board will use. +## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. ## -default ROM_SIZE=524288 +default CONFIG_ROM_SIZE=524288 ## -## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use +## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -default FALLBACK_SIZE=ROM_IMAGE_SIZE +default CONFIG_FALLBACK_SIZE=CONFIG_ROM_IMAGE_SIZE #more 1M for pgtbl default CONFIG_LB_MEM_TOPK=2048 @@ -129,37 +129,37 @@ default CONFIG_LB_MEM_TOPK=2048 ## ## Build code for the fallback boot ## -default HAVE_FALLBACK_BOOT=1 +default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## Build code to reset the motherboard from linuxBIOS ## -default HAVE_HARD_RESET=1 +default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=15 +default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_IRQ_SLOT_COUNT=15 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default HAVE_MP_TABLE=1 +default CONFIG_HAVE_MP_TABLE=1 ## ## Build code to export a CMOS option table ## -default HAVE_OPTION_TABLE=1 +default CONFIG_HAVE_OPTION_TABLE=1 ## ## Move the default coreboot cmos range off of AMD RTC registers ## -default LB_CKS_RANGE_START=49 -default LB_CKS_RANGE_END=122 -default LB_CKS_LOC=123 +default CONFIG_LB_CKS_RANGE_START=49 +default CONFIG_LB_CKS_RANGE_END=122 +default CONFIG_LB_CKS_LOC=123 ## ## Build code for SMP support @@ -170,41 +170,41 @@ default CONFIG_MAX_CPUS=4 default CONFIG_MAX_PHYSICAL_CPUS=2 default CONFIG_LOGICAL_CPUS=1 -default SERIAL_CPU_INIT=0 +default CONFIG_SERIAL_CPU_INIT=0 -default ENABLE_APIC_EXT_ID=0 -default APIC_ID_OFFSET=0x8 -default LIFT_BSP_APIC_ID=1 +default CONFIG_ENABLE_APIC_EXT_ID=0 +default CONFIG_APIC_ID_OFFSET=0x8 +default CONFIG_LIFT_BSP_APIC_ID=1 #memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead. #2G -#default HW_MEM_HOLE_SIZEK=0x200000 +#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000 #1G -default HW_MEM_HOLE_SIZEK=0x100000 +default CONFIG_HW_MEM_HOLE_SIZEK=0x100000 #512M -#default HW_MEM_HOLE_SIZEK=0x80000 +#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000 #make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy -#default HW_MEM_HOLE_SIZE_AUTO_INC=1 +#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1 #Opteron K8 1G HT Support -default K8_HT_FREQ_1G_SUPPORT=1 +default CONFIG_K8_HT_FREQ_1G_SUPPORT=1 #VGA Console default CONFIG_CONSOLE_VGA=1 default CONFIG_PCI_ROM_RUN=0 #HT Unit ID offset, default is 1, the typical one -default HT_CHAIN_UNITID_BASE=0x06 +default CONFIG_HT_CHAIN_UNITID_BASE=0x06 #real SB Unit ID, default is 0x20, mean dont touch it at last -default HT_CHAIN_END_UNITID_BASE=0x01 +default CONFIG_HT_CHAIN_END_UNITID_BASE=0x01 #make the SB HT chain on bus 0, default is not (0) -default SB_HT_CHAIN_ON_BUS0=2 +default CONFIG_SB_HT_CHAIN_ON_BUS0=2 #only offset for SB chain?, default is yes(1) -#default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 +#default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 #allow capable device use that above 4G #default CONFIG_PCI_64BIT_PREF_MEM=1 @@ -212,10 +212,10 @@ default SB_HT_CHAIN_ON_BUS0=2 ## ## enable CACHE_AS_RAM specifics ## -default USE_DCACHE_RAM=1 -default DCACHE_RAM_BASE=0xcc000 -default DCACHE_RAM_SIZE=0x04000 -default DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000 +default CONFIG_USE_DCACHE_RAM=1 +default CONFIG_DCACHE_RAM_BASE=0xcc000 +default CONFIG_DCACHE_RAM_SIZE=0x04000 +default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000 default CONFIG_USE_INIT=0 ## @@ -226,37 +226,37 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="DL145 G3" -default MAINBOARD_VENDOR="HP" -#default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022 -#default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80 +default CONFIG_MAINBOARD_PART_NUMBER="DL145 G3" +default CONFIG_MAINBOARD_VENDOR="HP" +#default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022 +#default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80 ### ### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default ROM_IMAGE_SIZE = 65536 +## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. +default CONFIG_ROM_IMAGE_SIZE = 65536 ## ## Use a small 8K stack ## -default STACK_SIZE=0x2000 +default CONFIG_STACK_SIZE=0x2000 ## ## Use a small 32K heap ## -default HEAP_SIZE=0x8000 +default CONFIG_HEAP_SIZE=0x8000 ## ## Only use the option table in a normal image ## -default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE +default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE ## ## Coreboot C code runs at this location in RAM ## -default _RAMBASE=0x00100000 +default CONFIG_RAMBASE=0x00100000 ## ## Load the payload from the ROM @@ -270,8 +270,8 @@ default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler ## -default CC="$(CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" +default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" +default CONFIG_HOSTCC="gcc" ## ## Disable the gdb stub by default @@ -289,21 +289,21 @@ default CONFIG_USE_PRINTK_IN_CAR=1 default CONFIG_CONSOLE_SERIAL8250=1 ## Select the serial console baud rate -default TTYS0_BAUD=115200 -#default TTYS0_BAUD=57600 -#default TTYS0_BAUD=38400 -#default TTYS0_BAUD=19200 -#default TTYS0_BAUD=9600 -#default TTYS0_BAUD=4800 -#default TTYS0_BAUD=2400 -#default TTYS0_BAUD=1200 +default CONFIG_TTYS0_BAUD=115200 +#default CONFIG_TTYS0_BAUD=57600 +#default CONFIG_TTYS0_BAUD=38400 +#default CONFIG_TTYS0_BAUD=19200 +#default CONFIG_TTYS0_BAUD=9600 +#default CONFIG_TTYS0_BAUD=4800 +#default CONFIG_TTYS0_BAUD=2400 +#default CONFIG_TTYS0_BAUD=1200 # Select the serial console base port -default TTYS0_BASE=0x3f8 +default CONFIG_TTYS0_BASE=0x3f8 # Select the serial protocol # This defaults to 8 data bits, 1 stop bit, and no parity -default TTYS0_LCS=0x3 +default CONFIG_TTYS0_LCS=0x3 ## ### Select the coreboot loglevel @@ -315,17 +315,17 @@ default TTYS0_LCS=0x3 ## WARNING 5 warning conditions ## NOTICE 6 normal but significant condition ## INFO 7 informational -## DEBUG 8 debug-level messages +## CONFIG_DEBUG 8 debug-level messages ## SPEW 9 Way too many details ## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=8 +default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging -default MAXIMUM_CONSOLE_LOGLEVEL=8 +default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 ## ## Select power on after power fail setting -default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" +default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ## ## CBFS diff --git a/src/mainboard/hp/dl145_g3/cache_as_ram_auto.c b/src/mainboard/hp/dl145_g3/cache_as_ram_auto.c index c226969..c3aeca6 100644 --- a/src/mainboard/hp/dl145_g3/cache_as_ram_auto.c +++ b/src/mainboard/hp/dl145_g3/cache_as_ram_auto.c @@ -44,7 +44,7 @@ //if we want to wait for core1 done before DQS training, set it to 0 #define K8_SET_FIDVID_CORE0_ONLY 1 -#if K8_REV_F_SUPPORT == 1 +#if CONFIG_K8_REV_F_SUPPORT == 1 #define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 #endif @@ -62,7 +62,7 @@ #include "pc80/mc146818rtc_early.c" -#if USE_FAILOVER_IMAGE==0 +#if CONFIG_USE_FAILOVER_IMAGE==0 #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "ram/ramtest.c" @@ -84,7 +84,7 @@ #include "superio/nsc/pc87417/pc87417_early_serial.c" -#if USE_FAILOVER_IMAGE==0 +#if CONFIG_USE_FAILOVER_IMAGE==0 #include "cpu/x86/bist.h" @@ -156,7 +156,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #endif -#if ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE == 1)) || ((HAVE_FAILOVER_BOOT==0) && (USE_FALLBACK_IMAGE == 1)) +#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) #include "northbridge/amd/amdk8/early_ht.c" @@ -238,7 +238,7 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) ); fallback_image: -#if HAVE_FAILOVER_BOOT==1 +#if CONFIG_HAVE_FAILOVER_BOOT==1 __asm__ volatile ("jmp __fallback_image" : /* outputs */ : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ @@ -253,21 +253,21 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx); void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { -#if HAVE_FAILOVER_BOOT==1 - #if USE_FAILOVER_IMAGE==1 +#if CONFIG_HAVE_FAILOVER_BOOT==1 + #if CONFIG_USE_FAILOVER_IMAGE==1 failover_process(bist, cpu_init_detectedx); #else real_main(bist, cpu_init_detectedx); #endif #else - #if USE_FALLBACK_IMAGE == 1 + #if CONFIG_USE_FALLBACK_IMAGE == 1 failover_process(bist, cpu_init_detectedx); #endif real_main(bist, cpu_init_detectedx); #endif } -#if USE_FAILOVER_IMAGE==0 +#if CONFIG_USE_FAILOVER_IMAGE==0 void real_main(unsigned long bist, unsigned long cpu_init_detectedx) { @@ -283,7 +283,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) }; - struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); + struct sys_info *sysinfo = (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); int needs_reset; unsigned bsp_apicid = 0; @@ -293,7 +293,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); } - pilot_enable_serial(SERIAL_DEV, TTYS0_BASE); + pilot_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); //setup_mp_resource_map(); @@ -310,7 +310,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n"); -#if MEM_TRAIN_SEQ == 1 +#if CONFIG_MEM_TRAIN_SEQ == 1 set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram #endif setup_coherent_ht_domain(); diff --git a/src/mainboard/hp/dl145_g3/get_bus_conf.c b/src/mainboard/hp/dl145_g3/get_bus_conf.c index d5732d0..65a0eb9 100644 --- a/src/mainboard/hp/dl145_g3/get_bus_conf.c +++ b/src/mainboard/hp/dl145_g3/get_bus_conf.c @@ -108,7 +108,7 @@ void get_bus_conf(void) printk_debug("now found %s...\n",dev_path(dev)); if(dev) { m->bus_bcm5785_1_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); -#if HT_CHAIN_END_UNITID_BASE >= HT_CHAIN_UNITID_BASE +#if CONFIG_HT_CHAIN_END_UNITID_BASE >= CONFIG_HT_CHAIN_UNITID_BASE m->bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); m->bus_isa++; printk_debug("bus_isa 1=%d\n",m->bus_isa); @@ -124,7 +124,7 @@ void get_bus_conf(void) dev = dev_find_slot(m->bus_bcm5780[0], PCI_DEVFN(m->sbdn2 + i - 1,0)); if(dev) { m->bus_bcm5780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); -#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE +#if CONFIG_HT_CHAIN_END_UNITID_BASE < CONFIG_HT_CHAIN_UNITID_BASE m->bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); m->bus_isa++; printk_debug("bus_isa 2=%d\n",m->bus_isa); |