Make fam10 build (but not boot due to bootblock size problems.)

Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Marc Jones <marcj303@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4762 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

2 files changed, 65 insertions, 44 deletions

diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/Kconfig b/src/mainboard/amd/serengeti_cheetah_fam10/Kconfig
index da4ea1f..1feca96 100644
--- a/src/mainboard/amd/serengeti_cheetah_fam10/Kconfig
+++ b/src/mainboard/amd/serengeti_cheetah_fam10/Kconfig
@@ -13,9 +13,8 @@ config BOARD_AMD_SERENGETI_CHEETAH_FAM10
 	select USE_DCACHE_RAM
 	select HAVE_HARD_RESET
 	select IOAPIC
-	select AP_CODE_IN_CAR
 	select SB_HT_CHAIN_UNITID_OFFSET_ONLY
-	select WAIT_BEFORE_CPUS_INIT
+	select SERIAL_CPU_INIT
 	select AMDMCT
 	select HAVE_ACPI_TABLES
 
@@ -24,24 +23,9 @@ config MAINBOARD_DIR
 	default amd/serengeti_cheetah_fam10
 	depends on BOARD_AMD_SERENGETI_CHEETAH_FAM10
 
-config DCACHE_RAM_BASE
-	hex
-	default 0xc8000
-	depends on BOARD_AMD_SERENGETI_CHEETAH_FAM10
-
-config DCACHE_RAM_SIZE
-	hex
-	default 0x08000
-	depends on BOARD_AMD_SERENGETI_CHEETAH_FAM10
-
-config DCACHE_RAM_GLOBAL_VAR_SIZE
-	hex
-	default 0x01000
-	depends on BOARD_AMD_SERENGETI_CHEETAH_FAM10
-
 config APIC_ID_OFFSET
 	hex
-	default 0x8
+	default 0x0
 	depends on BOARD_AMD_SERENGETI_CHEETAH_FAM10
 
 config LB_CKS_RANGE_END
@@ -100,11 +84,6 @@ config USE_INIT
 	default n
 	depends on BOARD_AMD_SERENGETI_CHEETAH_FAM10
 
-config SERIAL_CPU_INIT
-	bool
-	default n
-	depends on BOARD_AMD_SERENGETI_CHEETAH_FAM10
-
 config IRQ_SLOT_COUNT
 	int
 	default 11
@@ -115,3 +94,37 @@ config AMD_UCODE_PATCH_FILE
 	default "mc_patch_01000095.h"
 	depends on BOARD_AMD_SERENGETI_CHEETAH_FAM10
 
+config LB_MEM_TOPK
+	hex
+	default 0x4000
+	depends on BOARD_AMD_SERENGETI_CHEETAH_FAM10
+
+config HEAP_SIZE
+	hex
+	default 0xc0000
+	depends on BOARD_AMD_SERENGETI_CHEETAH_FAM10
+
+config ACPI_SSDTX_NUM
+	int
+	default 31
+	depends on BOARD_AMD_SERENGETI_CHEETAH_FAM10
+
+config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+	hex
+	default 0x2b80
+	depends on BOARD_AMD_SERENGETI_CHEETAH_FAM10
+
+config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+	hex
+	default 0x1022
+	depends on BOARD_AMD_SERENGETI_CHEETAH_FAM10
+
+config ENABLE_APIC_EXT_ID
+	bool
+	default y
+	depends on BOARD_AMD_SERENGETI_CHEETAH_FAM10
+
+config LIFT_BSP_APIC_ID
+	bool
+	default y
+	depends on BOARD_AMD_SERENGETI_CHEETAH_FAM10
diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/Makefile.inc b/src/mainboard/amd/serengeti_cheetah_fam10/Makefile.inc
index 19e58bd..0966e03 100644
--- a/src/mainboard/amd/serengeti_cheetah_fam10/Makefile.inc
+++ b/src/mainboard/amd/serengeti_cheetah_fam10/Makefile.inc
@@ -29,11 +29,13 @@ obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o
 obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o
 obj-$(CONFIG_HAVE_ACPI_TABLES) += fadt.o
 
-# ./ssdt.o is in northbridge/amd/amdk8/Config.lb
-obj-$(CONFIG_ACPI_SSDTX_NUM) += ssdt2.o
-obj-$(CONFIG_ACPI_SSDTX_NUM) += ssdt3.o
-obj-$(CONFIG_ACPI_SSDTX_NUM) += ssdt4.o
-driver-y += ../../../drivers/i2c/i2cmux/i2cmux.o
+# ./ssdt.o is in northbridge/amd/amdfam10/Makefile.inc
+obj-$(CONFIG_HAVE_ACPI_TABLES) += ssdt2.o
+obj-$(CONFIG_HAVE_ACPI_TABLES) += ssdt3.o
+obj-$(CONFIG_HAVE_ACPI_TABLES) += ssdt4.o
+obj-$(CONFIG_HAVE_ACPI_TABLES) += ssdt5.o
+
+driver-y += ../../../drivers/i2c/i2cmux2/i2cmux2.o
 
 # This is part of the conversion to init-obj and away from included code.
 
@@ -54,32 +56,38 @@ ldscript-y += ../../../../src/arch/i386/lib/failover.lds
 
 ifdef POST_EVALUATION
 
-$(obj)/dsdt.c: $(src)/mainboard/$(MAINBOARDDIR)/dx/dsdt_lb.dsl
-	iasl -p dsdt -tc $(src)/mainboard/$(MAINBOARDDIR)/dx/dsdt_lb.dsl
-	mv dsdt.hex $@
+$(obj)/mainboard/$(MAINBOARDDIR)/dsdt.c: $(src)/mainboard/$(MAINBOARDDIR)/dx/dsdt_lb.dsl
+	iasl -p $(obj)/mainboard/$(MAINBOARDDIR)/dsdt -tc $<
+	mv $(obj)/mainboard/$(MAINBOARDDIR)/dsdt.hex $@
 
-$(obj)/mainboard/$(MAINBOARDDIR)/dsdt.o: $(obj)/dsdt.c
+$(obj)/mainboard/$(MAINBOARDDIR)/dsdt.o: $(obj)/mainboard/$(MAINBOARDDIR)/dsdt.c
 	$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c $< -o $@
 
-$(obj)/ssdt2.c: $(src)/mainboard/$(MAINBOARDDIR)/dx/pci2.asl
-	iasl -p $(CURDIR)/pci2 -tc $(CONFIG_MAINBOARD)/dx/pci2.asl
-	perl -pi -e 's/AmlCode/AmlCode_ssdt2/g' pci2.hex
-	mv pci2.hex ssdt2.c
+$(obj)/mainboard/$(MAINBOARDDIR)/ssdt2.c: $(src)/mainboard/$(MAINBOARDDIR)/dx/pci2.asl
+	iasl -p $(obj)/mainboard/$(MAINBOARDDIR)/pci2 -tc $<
+	perl -pi -e 's/AmlCode/AmlCode_ssdt2/g' $(obj)/mainboard/$(MAINBOARDDIR)/pci2.hex
+	mv $(obj)/mainboard/$(MAINBOARDDIR)/pci2.hex $@
+
+$(obj)/mainboard/$(MAINBOARDDIR)/ssdt3.c: $(src)/mainboard/$(MAINBOARDDIR)/dx/pci3.asl
+	iasl -p $(obj)/mainboard/$(MAINBOARDDIR)/pci3 -tc $<
+	perl -pi -e 's/AmlCode/AmlCode_ssdt3/g' $(obj)/mainboard/$(MAINBOARDDIR)/pci3.hex
+	mv $(obj)/mainboard/$(MAINBOARDDIR)/pci3.hex $@
 
-$(obj)/ssdt3.c: $(src)/mainboard/$(MAINBOARDDIR)/dx/pci3.asl"
-	iasl -p $(CURDIR)/pci3 -tc $(CONFIG_MAINBOARD)/
-	perl -pi -e 's/AmlCode/AmlCode_ssdt3/g' pci3.hex
-	mv pci3.hex ssdt3.c
+$(obj)/mainboard/$(MAINBOARDDIR)/ssdt4.c: $(src)/mainboard/$(MAINBOARDDIR)/dx/pci4.asl
+	iasl -p $(obj)/mainboard/$(MAINBOARDDIR)/pci4 -tc $<
+	perl -pi -e 's/AmlCode/AmlCode_ssdt4/g' $(obj)/mainboard/$(MAINBOARDDIR)/pci4.hex
+	mv $(obj)/mainboard/$(MAINBOARDDIR)/pci4.hex $@
 
-$(obj)/ssdt4.c: $(src)/mainboard/$(MAINBOARDDIR)/dx/pci4.asl"
-	iasl -p $(CURDIR)/pci4 -tc $(CONFIG_MAINBOARD)/dx/pci4.asl
-	perl -pi -e 's/AmlCode/AmlCode_ssdt4/g' pci4.hex
-	mv pci4.hex ssdt4.c
+$(obj)/mainboard/$(MAINBOARDDIR)/ssdt5.c: $(src)/mainboard/$(MAINBOARDDIR)/dx/pci5.asl
+	iasl -p $(obj)/mainboard/$(MAINBOARDDIR)/pci5 -tc $<
+	perl -pi -e 's/AmlCode/AmlCode_ssdt5/g' $(obj)/mainboard/$(MAINBOARDDIR)/pci5.hex
+	mv $(obj)/mainboard/$(MAINBOARDDIR)/pci5.hex $@
 
 $(obj)/mainboard/$(MAINBOARDDIR)/auto.inc: $(src)/mainboard/$(MAINBOARDDIR)/cache_as_ram_auto.c $(obj)/option_table.h
 	$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c -S  $(src)/mainboard/$(MAINBOARDDIR)/cache_as_ram_auto.c -o $@
 	perl -e 's/\.rodata/.rom.data/g' -pi $@
 	perl -e 's/\.text/.section .rom.text/g' -pi $@
 
+
 endif