diff options
| author | Scott Rifenbark <scott.m.rifenbark@intel.com> | 2012-06-22 09:36:48 -0700 |
|---|---|---|
| committer | Richard Purdie <richard.purdie@linuxfoundation.org> | 2012-06-25 14:57:17 +0100 |
| commit | 9234b282aaef38c926348d3a08829b0f56c2e538 (patch) | |
| tree | a15c901550abb724bb4ee1893b73f7e24c6cd99a /documentation/adt-manual | |
| parent | 73411842a6c71a50790ad7895484fcac3b97ef1d (diff) | |
| download | ast2050-yocto-poky-9234b282aaef38c926348d3a08829b0f56c2e538.zip ast2050-yocto-poky-9234b282aaef38c926348d3a08829b0f56c2e538.tar.gz | |
documentation/adt-manual/adt-prepare.xml: Re-worded toolchain generation
The section that describes how to generate the cross-toolchain into the
Yocto build tree erroneously referred to this process as installing the
toolchain. Furthermore, it actually mentioned the creation of a
toolchain tarball, which is wrong. I updated the section to more properly
refer to this procedure as generating the toolchain. I also removed the
bit about the tarball creation.
(From yocto-docs rev: 5ae8faa651ed6bf22c5475a4eacb5c758c62cea1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Diffstat (limited to 'documentation/adt-manual')
| -rw-r--r-- | documentation/adt-manual/adt-prepare.xml | 13 |
1 files changed, 7 insertions, 6 deletions
diff --git a/documentation/adt-manual/adt-prepare.xml b/documentation/adt-manual/adt-prepare.xml index 05a90f0..9f17c21 100644 --- a/documentation/adt-manual/adt-prepare.xml +++ b/documentation/adt-manual/adt-prepare.xml @@ -255,15 +255,16 @@ <title>Using BitBake and the Yocto Project Build Tree</title> <para> - A final way of installing just the cross-toolchain is to use BitBake to build the - toolchain within an existing Yocto Project build tree. - This method does not install the toolchain into the <filename>/opt</filename> directory. + A final way of making the cross-toolchain available is to use BitBake + to generate the toolchain within an existing Yocto Project build tree. + This method does not install the toolchain into the + <filename>/opt</filename> directory. As with the previous method, if you need to install the target sysroot, you must do this separately. </para> <para> - Follow these steps to build and install the toolchain into the build tree: + Follow these steps to generate the toolchain into the build tree: <orderedlist> <listitem><para>Source the environment setup script <filename>oe-init-build-env</filename> located in the Yocto Project @@ -281,7 +282,7 @@ <filename>local.conf</filename> file and re-run the BitBake command.</note></para></listitem> <listitem><para>Run <filename>bitbake meta-ide-support</filename> to complete the - cross-toolchain installation. + cross-toolchain generation. <note>If you change out of your working directory after you <filename>source</filename> the environment setup script and before you run the <filename>bitbake</filename> command, the command might not work. @@ -289,7 +290,7 @@ after checking or editing the <filename>local.conf</filename> but without changing out of your working directory.</note> Once the <filename>bitbake</filename> command finishes, - the tarball for the cross-toolchain is generated within the Yocto Project build tree. + the cross-toolchain is generated and populated within the Yocto Project build tree. You will notice environment setup files for the cross-toolchain in the Yocto Project build tree in the <filename>tmp</filename> directory. Setup script filenames contain the strings <filename>environment-setup</filename>. |
