Initial population

git-svn-id: https://svn.o-hand.com/repos/poky@2 311d38ba-8fff-0310-9ca6-ca027cbcb966

3 files changed, 698 insertions, 0 deletions

diff --git a/bitbake/doc/manual/Makefile b/bitbake/doc/manual/Makefile
new file mode 100644
index 0000000..a43c025
--- /dev/null
+++ b/bitbake/doc/manual/Makefile
@@ -0,0 +1,56 @@
+topdir = .
+manual = $(topdir)/usermanual.xml
+# types = pdf txt rtf ps xhtml html man tex texi dvi
+# types = pdf txt
+types = $(xmltotypes) $(htmltypes)
+xmltotypes = pdf txt
+htmltypes = html xhtml
+htmlxsl = $(if $(filter $@,$(foreach type,$(htmltypes),$(type)-nochunks)),http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl,http://docbook.sourceforge.net/release/xsl/current/$@/chunk.xsl)
+htmlcssfile = docbook.css
+htmlcss = $(topdir)/html.css
+# htmlcssfile =
+# htmlcss =
+cleanfiles = $(foreach i,$(types),$(topdir)/$(i))
+
+ifdef DEBUG
+define command
+	$(1)
+endef
+else
+define command
+	@echo $(2) $(3) $(4)
+	@$(1) >/dev/null
+endef
+endif
+
+all: $(types)
+
+lint: $(manual) FORCE
+	$(call command,xmllint --xinclude --postvalid --noout $(manual),XMLLINT $(manual))
+
+$(types) $(foreach type,$(htmltypes),$(type)-nochunks): lint FORCE
+
+$(foreach type,$(htmltypes),$(type)-nochunks): $(if $(htmlcss),$(htmlcss)) $(manual)
+	@mkdir -p $@
+ifdef htmlcss
+	$(call command,install -m 0644 $(htmlcss) $@/$(htmlcssfile),CP $(htmlcss) $@/$(htmlcssfile))
+endif
+	$(call command,xsltproc --stringparam base.dir $@/ $(if $(htmlcssfile),--stringparam html.stylesheet $(htmlcssfile)) $(htmlxsl) $(manual) > $@/index.$(patsubst %-nochunks,%,$@),XSLTPROC $@ $(manual))
+
+$(htmltypes): $(if $(htmlcss),$(htmlcss)) $(manual)
+	@mkdir -p $@
+ifdef htmlcss
+	$(call command,install -m 0644 $(htmlcss) $@/$(htmlcssfile),CP $(htmlcss) $@/$(htmlcssfile))
+endif
+	$(call command,xsltproc --stringparam base.dir $@/ $(if $(htmlcssfile),--stringparam html.stylesheet $(htmlcssfile)) $(htmlxsl) $(manual),XSLTPROC $@ $(manual))
+
+$(xmltotypes): $(manual)
+	$(call command,xmlto --extensions -o $(topdir)/$@ $@ $(manual),XMLTO $@ $(manual))
+
+clean:
+	rm -rf $(cleanfiles)
+
+$(foreach i,$(types) $(foreach type,$(htmltypes),$(type)-nochunks),clean-$(i)):
+	rm -rf $(patsubst clean-%,%,$@)
+
+FORCE: 
diff --git a/bitbake/doc/manual/html.css b/bitbake/doc/manual/html.css
new file mode 100644
index 0000000..6eedfd3
--- /dev/null
+++ b/bitbake/doc/manual/html.css
@@ -0,0 +1,281 @@
+/* Feuille de style DocBook du projet Traduc.org                */
+/* DocBook CSS stylesheet of the Traduc.org project             */
+
+/* (c) Jean-Philippe Guérard - 14 août 2004                     */
+/* (c) Jean-Philippe Guérard - 14 August 2004                   */
+
+/* Cette feuille de style est libre, vous pouvez la             */
+/* redistribuer et la modifier selon les termes de la Licence   */
+/* Art Libre. Vous trouverez un exemplaire de cette Licence sur */
+/* http://tigreraye.org/Petit-guide-du-traducteur.html#licence-art-libre */
+
+/* This work of art is free, you can redistribute it and/or     */
+/* modify it according to terms of the Free Art license. You    */
+/* will find a specimen of this license on the Copyleft         */
+/* Attitude web site: http://artlibre.org as well as on other   */
+/* sites.                                                       */
+/* Please note that the French version of this licence as shown */
+/* on http://tigreraye.org/Petit-guide-du-traducteur.html#licence-art-libre */
+/* is only official licence of this document. The English       */
+/* is only provided to help you understand this licence.        */
+
+/* La dernière version de cette feuille de style est toujours   */
+/* disponible sur : http://tigreraye.org/style.css              */
+/* Elle est également disponible sur :                          */
+/* http://www.traduc.org/docs/HOWTO/lecture/style.css           */
+
+/* The latest version of this stylesheet is available from:     */
+/* http://tigreraye.org/style.css                               */
+/* It is also available on:                                     */
+/* http://www.traduc.org/docs/HOWTO/lecture/style.css           */
+
+/* N'hésitez pas à envoyer vos commentaires et corrections à    */
+/* Jean-Philippe Guérard <jean-philippe.guerard@tigreraye.org>  */
+
+/* Please send feedback and bug reports to                      */
+/* Jean-Philippe Guérard <jean-philippe.guerard@tigreraye.org>  */
+
+/* $Id: style.css,v 1.14 2004/09/10 20:12:09 fevrier Exp fevrier $ */
+
+/* Présentation générale du document */
+/* Overall document presentation */
+
+body {
+    /*
+    font-family: Apolline, "URW Palladio L", Garamond, jGaramond,
+                 "Bitstream Cyberbit", "Palatino Linotype", serif;
+     */
+    margin: 7%;
+    background-color: white;
+}
+
+/* Taille du texte */
+/* Text size */
+
+* { font-size: 100%; }
+
+/* Gestion des textes mis en relief imbriqués */
+/* Embedded emphasis */
+
+em { font-style: italic; }
+em em { font-style: normal; }
+em em em { font-style: italic; }
+
+/* Titres */
+/* Titles */
+
+h1 { font-size: 200%; font-weight: 900; }
+h2 { font-size: 160%; font-weight: 900; }
+h3 { font-size: 130%; font-weight: bold; }
+h4 { font-size: 115%; font-weight: bold; }
+h5 { font-size: 108%; font-weight: bold; }
+h6 {                  font-weight: bold; }
+
+/* Nom de famille en petites majuscules (uniquement en français) */
+/* Last names in small caps (for French only) */
+
+*[class~="surname"]:lang(fr) { font-variant: small-caps; }
+
+/* Blocs de citation */
+/* Quotation blocs */
+
+div[class~="blockquote"] {
+  border: solid 2px #AAA;
+  padding: 5px;
+  margin: 5px;
+}
+
+div[class~="blockquote"] > table {
+  border: none;
+}
+
+/* Blocs litéraux : fond gris clair */
+/* Literal blocs: light gray background */
+
+*[class~="literallayout"] {
+  background: #f0f0f0;
+  padding: 5px;
+  margin: 5px;
+}
+
+/* Programmes et captures texte : fond bleu clair */
+/* Listing and text screen snapshots: light blue background */
+
+*[class~="programlisting"], *[class~="screen"] {
+  background: #f0f0ff;
+  padding: 5px;
+  margin: 5px;
+}
+
+/* Les textes à remplacer sont surlignés en vert pâle */
+/* Replaceable text in highlighted in pale green */
+
+*[class~="replaceable"] { 
+    background-color: #98fb98;
+    font-style: normal; }
+
+/* Tables : fonds gris clair & bords simples */
+/* Tables: light gray background and solid borders */
+
+*[class~="table"] *[class~="title"] { width:100%; border: 0px; }
+
+table {
+    border: 1px solid #aaa;
+    border-collapse: collapse;
+    padding: 2px;
+    margin: 5px;
+}
+
+/* Listes simples en style table */
+/* Simples lists in table presentation */
+
+table[class~="simplelist"] {
+    background-color: #F0F0F0;
+    margin: 5px;
+    border: solid 1px #AAA;
+}
+
+table[class~="simplelist"] td {
+    border: solid 1px #AAA;
+}
+
+/* Les tables */
+/* Tables */
+
+*[class~="table"] table {
+    background-color: #F0F0F0;
+    border: solid 1px #AAA;
+}
+*[class~="informaltable"] table { background-color: #F0F0F0; }
+
+th,td {
+    vertical-align: baseline;
+    text-align: left;
+    padding: 0.1em 0.3em;
+    empty-cells: show; 
+}
+
+/* Alignement des colonnes */
+/* Colunms alignment */
+
+td[align=center] ,  th[align=center]  { text-align: center; }
+td[align=right] ,   th[align=right]   { text-align: right; }
+td[align=left] ,    th[align=left]    { text-align: left; }
+td[align=justify] , th[align=justify] { text-align: justify; }
+
+/* Pas de marge autour des images */
+/* No inside margins for images */
+
+img { border: 0; }
+
+/* Les liens ne sont pas soulignés */
+/* No underlines for links */
+
+:link , :visited , :active { text-decoration: none; }
+
+/* Prudence : cadre jaune et fond jaune clair */
+/* Caution: yellow border and light yellow background */
+
+*[class~="caution"] {
+    border: solid 2px yellow;
+    background-color: #ffffe0;
+    padding: 1em 6px 1em ;
+    margin: 5px;
+}
+
+*[class~="caution"] th {
+    vertical-align: middle
+}
+
+*[class~="caution"] table {
+    background-color: #ffffe0;
+    border: none;
+}
+
+/* Note importante : cadre jaune et fond jaune clair */
+/* Important: yellow border and light yellow background */
+
+*[class~="important"] {
+    border: solid 2px yellow;
+    background-color: #ffffe0;
+    padding: 1em 6px 1em;
+    margin: 5px;
+}
+
+*[class~="important"] th {
+    vertical-align: middle
+}
+
+*[class~="important"] table  {
+    background-color: #ffffe0;
+    border: none;
+}
+
+/* Mise en évidence : texte légèrement plus grand */
+/* Highlights: slightly larger texts */
+
+*[class~="highlights"] {
+    font-size:  110%;
+}
+
+/* Note : cadre bleu et fond bleu clair */
+/* Notes: blue border and light blue background */
+
+*[class~="note"]   {
+    border: solid 2px #7099C5;
+    background-color: #f0f0ff;
+    padding: 1em 6px 1em ;
+    margin: 5px;
+}
+
+*[class~="note"] th {
+    vertical-align: middle
+}
+
+*[class~="note"] table {
+    background-color: #f0f0ff;
+    border: none;
+}
+
+/* Astuce : cadre vert et fond vert clair */
+/* Tip: green border and light green background */
+
+*[class~="tip"] {
+    border: solid 2px #00ff00;
+    background-color: #f0ffff;
+    padding: 1em 6px 1em ;
+    margin: 5px;
+}
+
+*[class~="tip"] th {
+    vertical-align: middle;
+}
+
+*[class~="tip"] table {
+    background-color: #f0ffff;
+    border: none;
+}
+
+/* Avertissement : cadre rouge et fond rouge clair */
+/* Warning: red border and light red background */
+
+*[class~="warning"] {
+    border: solid 2px #ff0000;
+    background-color: #fff0f0; 
+    padding: 1em 6px 1em ;
+    margin: 5px;
+}
+
+*[class~="warning"] th {
+    vertical-align: middle;
+}
+                    
+
+*[class~="warning"] table {
+    background-color: #fff0f0;
+    border: none;
+}
+
+/* Fin */
+/* The End */
+
diff --git a/bitbake/doc/manual/usermanual.xml b/bitbake/doc/manual/usermanual.xml
new file mode 100644
index 0000000..b96863c
--- /dev/null
+++ b/bitbake/doc/manual/usermanual.xml
@@ -0,0 +1,361 @@
+<?xml version="1.0"?>
+<!--
+  ex:ts=4:sw=4:sts=4:et
+  -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
+-->
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+                      "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
+<book>
+    <bookinfo>
+        <title>BitBake User Manual</title>
+        <authorgroup>
+            <corpauthor>BitBake Team</corpauthor>
+        </authorgroup>
+        <copyright>
+            <year>2004, 2005</year>
+            <holder>Chris Larson</holder>
+            <holder>Phil Blundell</holder>
+        </copyright>
+        <legalnotice>
+            <para>This work is licensed under the Creative Commons Attribution License. To view a copy of this license, visit <ulink url="http://creativecommons.org/licenses/by/2.0/">http://creativecommons.org/licenses/by/2.0/</ulink> or send a letter to Creative Commons, 559 Nathan Abbott Way, Stanford, California 94305, USA.</para>
+        </legalnotice>
+    </bookinfo>
+    <chapter>
+        <title>Introduction</title>
+        <section>
+            <title>Overview</title>
+            <para>BitBake is, at its simplest, a tool for executing
+tasks and managing metadata.  As such, its similarities to GNU make and other
+build tools are readily apparent.  It was inspired by Portage, the package management system used by the Gentoo Linux distribution.  BitBake is the basis of the <ulink url="http://www.openembedded.org/">OpenEmbedded</ulink> project, which is being used to build and maintain a number of embedded Linux distributions, including OpenZaurus and Familiar.</para>
+        </section>
+        <section>
+            <title>Background and Goals</title>
+            <para>Prior to BitBake, no other build tool adequately met
+the needs of an aspiring embedded Linux distribution.  All of the
+buildsystems used by traditional desktop Linux distributions lacked
+important functionality, and none of the ad-hoc
+<emphasis>buildroot</emphasis> systems, prevalent in the
+embedded space, were scalable or maintainable.</para>
+
+      <para>Some important goals for BitBake were:
+            <itemizedlist>
+                <listitem><para>Handle crosscompilation.</para></listitem>
+                <listitem><para>Handle interpackage dependencies (build time on target architecture, build time on native architecture, and runtime).</para></listitem>
+                <listitem><para>Support running any number of tasks within a given package, including, but not limited to, fetching upstream sources, unpacking them, patching them, configuring them, et cetera.</para></listitem>
+                <listitem><para>Must be linux distribution agnostic (both build and target).</para></listitem>
+                <listitem><para>Must be architecture agnostic</para></listitem>
+                <listitem><para>Must support multiple build and target operating systems (including cygwin, the BSDs, etc).</para></listitem>
+                <listitem><para>Must be able to be self contained, rather than tightly integrated into the build machine's root filesystem.</para></listitem>
+                <listitem><para>There must be a way to handle conditional metadata (on target architecture, operating system, distribution, machine).</para></listitem>
+                <listitem><para>It must be easy for the person using the tools to supply their own local metadata and packages to operate against.</para></listitem>
+                <listitem><para>Must make it easy to collaborate
+between multiple projects using BitBake for their
+builds.</para></listitem>
+		<listitem><para>Should provide an inheritance mechanism to
+share common metadata between many packages.</para></listitem>
+                <listitem><para>Et cetera...</para></listitem>
+            </itemizedlist>
+        </para>
+        <para>BitBake satisfies all these and many more.  Flexibility and power have always been the priorities.  It is highly extensible, supporting embedded Python code and execution of any arbitrary tasks.</para>
+        </section>
+    </chapter>
+    <chapter>
+        <title>Metadata</title>
+        <section>
+            <title>Description</title>
+            <itemizedlist>
+                <para>BitBake metadata can be classified into 3 major areas:</para>
+                <listitem>
+                    <para>Configuration Files</para>
+                </listitem>
+                <listitem>
+                    <para>.bb Files</para>
+                </listitem>
+                <listitem>
+                    <para>Classes</para>
+                </listitem>
+            </itemizedlist>
+            <para>What follows are a large number of examples of BitBake metadata.  Any syntax which isn't supported in any of the aforementioned areas will be documented as such.</para>
+            <section>
+                <title>Basic variable setting</title>
+                <para><screen><varname>VARIABLE</varname> = "value"</screen></para>
+                <para>In this example, <varname>VARIABLE</varname> is <literal>value</literal>.</para>
+            </section>
+            <section>
+                <title>Variable expansion</title>
+                <para>BitBake supports variables referencing one another's contents using a syntax which is similar to shell scripting</para>
+                <para><screen><varname>A</varname> = "aval"
+<varname>B</varname> = "pre${A}post"</screen></para>
+                <para>This results in <varname>A</varname> containing <literal>aval</literal> and <varname>B</varname> containing <literal>preavalpost</literal>.</para>
+            </section>
+            <section>
+                <title>Immediate variable expansion (:=)</title>
+                <para>:= results in a variable's contents being expanded immediately, rather than when the variable is actually used.</para>
+                <para><screen><varname>T</varname> = "123"
+<varname>A</varname> := "${B} ${A} test ${T}"
+<varname>T</varname> = "456"
+<varname>B</varname> = "${T} bval"
+
+<varname>C</varname> = "cval"
+<varname>C</varname> := "${C}append"</screen></para>
+                <para>In that example, <varname>A</varname> would contain <literal> test 123</literal>, <varname>B</varname> would contain <literal>456 bval</literal>, and <varname>C</varname> would be <literal>cvalappend</literal>.</para>
+            </section>
+            <section>
+                <title>Appending (+=) and prepending (=+)</title>
+                <para><screen><varname>B</varname> = "bval"
+<varname>B</varname> += "additionaldata"
+<varname>C</varname> = "cval"
+<varname>C</varname> =+ "test"</screen></para>
+                <para>In this example, <varname>B</varname> is now <literal>bval additionaldata</literal> and <varname>C</varname> is <literal>test cval</literal>.</para>
+            </section>
+            <section>
+                <title>Appending (.=) and prepending (=.) without spaces</title>
+                    <para><screen><varname>B</varname> = "bval"
+<varname>B</varname> += "additionaldata"
+<varname>C</varname> = "cval"
+<varname>C</varname> =+ "test"</screen></para>
+                <para>In this example, <varname>B</varname> is now <literal>bvaladditionaldata</literal> and <varname>C</varname> is <literal>testcval</literal>. In contrast to the above Appending and Prepending operators no additional space
+will be introduced.</para>
+            </section>
+            <section>
+                <title>Conditional metadata set</title>
+                <para>OVERRIDES is a <quote>:</quote> seperated variable containing each item you want to satisfy conditions.  So, if you have a variable which is conditional on <quote>arm</quote>, and <quote>arm</quote> is in OVERRIDES, then the <quote>arm</quote> specific version of the variable is used rather than the non-conditional version.  Example:</para>
+                <para><screen><varname>OVERRIDES</varname> = "architecture:os:machine"
+<varname>TEST</varname> = "defaultvalue"
+<varname>TEST_os</varname> = "osspecificvalue"
+<varname>TEST_condnotinoverrides</varname> = "othercondvalue"</screen></para>
+                <para>In this example, <varname>TEST</varname> would be <literal>osspecificvalue</literal>, due to the condition <quote>os</quote> being in <varname>OVERRIDES</varname>.</para>
+            </section>
+            <section>
+                <title>Conditional appending</title>
+                <para>BitBake also supports appending and prepending to variables based on whether something is in OVERRIDES.  Example:</para>
+                <para><screen><varname>DEPENDS</varname> = "glibc ncurses"
+<varname>OVERRIDES</varname> = "machine:local"
+<varname>DEPENDS_append_machine</varname> = " libmad"</screen></para>
+                <para>In this example, <varname>DEPENDS</varname> is set to <literal>glibc ncurses libmad</literal>.</para>
+            </section>
+            <section>
+                <title>Inclusion</title>
+                <para>Next, there is the <literal>include</literal> directive, which causes BitBake to parse in whatever file you specify, and insert it at that location, which is not unlike <command>make</command>.  However, if the path specified on the <literal>include</literal> line is a relative path, BitBake will locate the first one it can find within <envar>BBPATH</envar>.</para>
+            </section>
+            <section>
+                <title>Python variable expansion</title>
+                <para><screen><varname>DATE</varname> = "${@time.strftime('%Y%m%d',time.gmtime())}"</screen></para>
+                <para>This would result in the <varname>DATE</varname> variable containing today's date.</para>
+            </section>
+            <section>
+                <title>Defining executable metadata</title>
+                <para><emphasis>NOTE:</emphasis> This is only supported in .bb and .bbclass files.</para>
+                <para><screen>do_mytask () {
+    echo "Hello, world!"
+}</screen></para>
+                <para>This is essentially identical to setting a variable, except that this variable happens to be executable shell code.</para>
+                <para><screen>python do_printdate () {
+    import time
+    print time.strftime('%Y%m%d', time.gmtime())
+}</screen></para>
+                <para>This is the similar to the previous, but flags it as python so that BitBake knows it is python code.</para>
+            </section>
+            <section>
+                <title>Defining python functions into the global python namespace</title>
+                <para><emphasis>NOTE:</emphasis> This is only supported in .bb and .bbclass files.</para>
+                <para><screen>def get_depends(bb, d):
+    if bb.data.getVar('SOMECONDITION', d, True):
+        return "dependencywithcond"
+    else:
+        return "dependency"
+
+<varname>SOMECONDITION</varname> = "1"
+<varname>DEPENDS</varname> = "${@get_depends(bb, d)}"</screen></para>
+                <para>This would result in <varname>DEPENDS</varname> containing <literal>dependencywithcond</literal>.</para>
+            </section>
+            <section>
+                <title>Inheritance</title>
+                <para><emphasis>NOTE:</emphasis> This is only supported in .bb and .bbclass files.</para>
+                <para>The <literal>inherit</literal> directive is a means of specifying what classes of functionality your .bb requires.  It is a rudamentary form of inheritence.  For example, you can easily abstract out the tasks involved in building a package that uses autoconf and automake, and put that into a bbclass for your packages to make use of.  A given bbclass is located by searching for classes/filename.oeclass in <envar>BBPATH</envar>, where filename is what you inherited.</para>
+            </section>
+            <section>
+                <title>Tasks</title>
+                <para><emphasis>NOTE:</emphasis> This is only supported in .bb and .bbclass files.</para>
+                <para>In BitBake, each step that needs to be run for a given .bb is known as a task.  There is a command <literal>addtask</literal> to add new tasks (must be a defined python executable metadata and must start with <quote>do_</quote>) and describe intertask dependencies.</para>
+                <para><screen>python do_printdate () {
+    import time
+    print time.strftime('%Y%m%d', time.gmtime())
+}
+
+addtask printdate before do_build</screen></para>
+                <para>This defines the necessary python function and adds it as a task which is now a dependency of do_build (the default task).  If anyone executes the do_build task, that will result in do_printdate being run first.</para>
+            </section>
+            <section>
+                <title>Events</title>
+                <para><emphasis>NOTE:</emphasis> This is only supported in .bb and .bbclass files.</para>
+                <para>BitBake also implements a means of registering event handlers.  Events are triggered at certain points during operation, such as, the beginning of operation against a given .bb, the start of a given task, task failure, task success, et cetera.  The intent was to make it easy to do things like email notifications on build failure.</para>
+                <para><screen>addhandler myclass_eventhandler
+python myclass_eventhandler() {
+    from bb.event import NotHandled, getName
+    from bb import data
+
+    print "The name of the Event is %s" % getName(e)
+    print "The file we run for is %s" % data.getVar('FILE', e.data, True)
+
+    return NotHandled
+</screen></para><para>
+This event handler gets called every time an event is triggered. A global variable <varname>e</varname> is defined. <varname>e</varname>.data contains an instance of bb.data. With the getName(<varname>e</varname>)
+method one can get the name of the triggered event.</para><para>The above event handler prints the name
+of the event and the content of the <varname>FILE</varname> variable.</para>
+            </section>
+        </section>
+        <section>
+            <title>Parsing</title>
+            <section>
+                <title>Configuration Files</title>
+                <para>The first of the classifications of metadata in BitBake is configuration metadata.  This metadata is global, and therefore affects <emphasis>all</emphasis> packages and tasks which are executed.  Currently, BitBake has hardcoded knowledge of a single configuration file.  It expects to find 'conf/bitbake.conf' somewhere in the user specified <envar>BBPATH</envar>.  That configuration file generally has include directives to pull in any other metadata (generally files specific to architecture, machine, <emphasis>local</emphasis> and so on.</para>
+                <para>Only variable definitions and include directives are allowed in .conf files.</para>
+            </section>
+            <section>
+                <title>Classes</title>
+                <para>BitBake classes are our rudamentary inheritence mechanism.  As briefly mentioned in the metadata introduction, they're parsed when an <literal>inherit</literal> directive is encountered, and they are located in classes/ relative to the dirs in <envar>BBPATH</envar>.</para>
+            </section>
+            <section>
+                <title>.bb Files</title>
+                <para>A BitBake (.bb) file is a logical unit of tasks to be executed.  Normally this is a package to be built.  Inter-.bb dependencies are obeyed.  The files themselves are located via the <varname>BBFILES</varname> variable, which is set to a space seperated list of .bb files, and does handle wildcards.</para>
+            </section>
+        </section>
+    </chapter>
+    <chapter>
+        <title>Commands</title>
+        <section>
+            <title>bbread</title>
+            <para>bbread is a command for displaying BitBake metadata.  When run with no arguments, it has the core parse 'conf/bitbake.conf', as located in BBPATH, and displays that.  If you supply a file on the commandline, such as a .bb, then it parses that afterwards, using the aforementioned configuration metadata.</para>
+        <para><emphasis>NOTE: the stand a lone bbread command was removed. Instead of bbread use bitbake -e.
+        </emphasis></para>
+        </section>
+        <section>
+            <title>bitbake</title>
+            <section>
+                <title>Introduction</title>
+                <para>bitbake is the primary command in the system.  It facilitates executing tasks in a single .bb file, or executing a given task on a set of multiple .bb files, accounting for interdependencies amongst them.</para>
+            </section>
+            <section>
+                <title>Usage and Syntax</title>
+                <para>
+                    <screen><prompt>$ </prompt>bitbake --help
+usage: bitbake [options] [package ...]
+
+Executes the specified task (default is 'build') for a given set of BitBake files.
+It expects that BBFILES is defined, which is a space seperated list of files to
+be executed.  BBFILES does support wildcards.
+Default BBFILES are the .bb files in the current directory.
+
+options:
+  --version             show program's version number and exit
+  -h, --help            show this help message and exit
+  -b BUILDFILE, --buildfile=BUILDFILE
+                        execute the task against this .bb file, rather than a
+                        package from BBFILES.
+  -k, --continue        continue as much as possible after an error. While the
+                        target that failed, and those that depend on it,
+                        cannot be remade, the other dependencies of these
+                        targets can be processed all the same.
+  -f, --force           force run of specified cmd, regardless of stamp status
+  -i, --interactive     drop into the interactive mode.
+  -c CMD, --cmd=CMD     Specify task to execute. Note that this only executes
+                        the specified task for the providee and the packages
+                        it depends on, i.e. 'compile' does not implicitly call
+                        stage for the dependencies (IOW: use only if you know
+                        what you are doing)
+  -r FILE, --read=FILE  read the specified file before bitbake.conf
+  -v, --verbose         output more chit-chat to the terminal
+  -D, --debug           Increase the debug level
+  -n, --dry-run         don't execute, just go through the motions
+  -p, --parse-only      quit after parsing the BB files (developers only)
+  -d, --disable-psyco   disable using the psyco just-in-time compiler (not
+                        recommended)
+  -s, --show-versions   show current and preferred versions of all packages
+  -e, --environment     show the global or per-package environment (this is
+                        what used to be bbread)
+
+</screen>
+                </para>
+                <para>
+                <example>
+                    <title>Executing a task against a single .bb</title>
+                    <para>Executing tasks for a single file is relatively simple.  You specify the file in question, and bitbake parses it and executes the specified task (or <quote>build</quote> by default).  It obeys intertask dependencies when doing so.</para>
+                    <para><quote>clean</quote> task:</para>
+                    <para><screen><prompt>$ </prompt>bitbake -b blah_1.0.bb -c clean</screen></para>
+                    <para><quote>build</quote> task:</para>
+                    <para><screen><prompt>$ </prompt>bitbake -b blah_1.0.bb</screen></para>
+                </example>
+                </para>
+                <para>
+                <example>
+                    <title>Executing tasks against a set of .bb files</title>
+                    <para>There are a number of additional complexities introduced when one wants to manage multiple .bb files.  Clearly there needs to be a way to tell bitbake what files are available, and of those, which we want to execute at this time.  There also needs to be a way for each .bb to express its dependencies, both for build time and runtime.  There must be a way for the user to express their preferences when multiple .bb's provide the same functionality, or when there are multiple versions of a .bb.</para>
+                    <para>The next section, Metadata, outlines how one goes about specifying such things.</para>
+                    <para>Note that the bitbake command, when not using --buildfile, accepts a <varname>PROVIDER</varname>, not a filename or anything else.  By default, a .bb generally PROVIDES its packagename, packagename-version, and packagename-version-revision.</para>
+                    <screen><prompt>$ </prompt>bitbake blah</screen>
+                    <screen><prompt>$ </prompt>bitbake blah-1.0</screen>
+                    <screen><prompt>$ </prompt>bitbake blah-1.0-r0</screen>
+                    <screen><prompt>$ </prompt>bitbake -c clean blah</screen>
+                    <screen><prompt>$ </prompt>bitbake virtual/whatever</screen>
+                    <screen><prompt>$ </prompt>bitbake -c clean virtual/whatever</screen>
+                </example>
+                </para>
+            </section>
+            <section>
+                <title>Metadata</title>
+                <para>As you may have seen in the usage information, or in the information about .bb files, the BBFILES variable is how the bitbake tool locates its files.  This variable is a space seperated list of files that are available, and supports wildcards.
+                <example>
+                    <title>Setting BBFILES</title>
+                    <programlisting><varname>BBFILES</varname> = "/path/to/bbfiles/*.bb"</programlisting>
+                </example></para>
+                <para>With regard to dependencies, it expects the .bb to define a <varname>DEPENDS</varname> variable, which contains a space seperated list of <quote>package names</quote>, which themselves are the <varname>PN</varname> variable.  The <varname>PN</varname> variable is, in general, by default, set to a component of the .bb filename.</para>
+                <example>
+                    <title>Depending on another .bb</title>
+                    <para>a.bb:
+    <screen>PN = "package-a"
+    DEPENDS += "package-b"</screen>
+                    </para>
+                    <para>b.bb:
+    <screen>PN = "package-b"</screen>
+                    </para>
+                </example>
+                <example>
+                    <title>Using PROVIDES</title>
+                    <para>This example shows the usage of the PROVIDES variable, which allows a given .bb to specify what functionality it provides.</para>
+                    <para>package1.bb:
+    <screen>PROVIDES += "virtual/package"</screen>
+                    </para>
+                    <para>package2.bb:
+    <screen>DEPENDS += "virtual/package"</screen>
+                    </para>
+                    <para>package3.bb:
+    <screen>PROVIDES += "virtual/package"</screen>
+                    </para>
+                    <para>As you can see, here there are two different .bb's that provide the same functionality (virtual/package).  Clearly, there needs to be a way for the person running bitbake to control which of those providers gets used.  There is, indeed, such a way.</para>
+                    <para>The following would go into a .conf file, to select package1:
+    <screen>PREFERRED_PROVIDER_virtual/package = "package1"</screen>
+                    </para>
+                </example>
+                <example>
+                    <title>Specifying version preference</title>
+                    <para>When there are multiple <quote>versions</quote> of a given package, bitbake defaults to selecting the most recent version, unless otherwise specified.  If the .bb in question has a <varname>DEFAULT_PREFERENCE</varname> set lower than the other .bb's (default is 0), then it will not be selected.  This allows the person or persons maintaining the repository of .bb files to specify their preferences for the default selected version.  In addition, the user can specify their preferences with regard to version.</para>
+                    <para>If the first .bb is named <filename>a_1.1.bb</filename>, then the <varname>PN</varname> variable will be set to <quote>a</quote>, and the <varname>PV</varname> variable will be set to 1.1.</para>
+                    <para>If we then have an <filename>a_1.2.bb</filename>, bitbake will choose 1.2 by default.  However, if we define the following variable in a .conf that bitbake parses, we can change that.
+    <screen>PREFERRED_VERSION_a = "1.1"</screen>
+                    </para>
+                </example>
+                <example>
+                    <title>Using <quote>bbfile collections</quote></title>
+                    <para>bbfile collections exist to allow the user to have multiple repositories of bbfiles that contain the same exact package.  For example, one could easily use them to make one's own local copy of an upstream repository, but with custom modifications that one does not want upstream.  Usage:</para>
+                    <screen>BBFILES = "/stuff/openembedded/*/*.bb /stuff/openembedded.modified/*/*.bb"
+BBFILE_COLLECTIONS = "upstream local"
+BBFILE_PATTERN_upstream = "^/stuff/openembedded/"
+BBFILE_PATTERN_local = "^/stuff/openembedded.modified/"
+BBFILE_PRIORITY_upstream = "5"
+BBFILE_PRIORITY_local = "10"</screen>
+                </example>
+            </section>
+        </section>
+    </chapter>
+</book>