diff options
Diffstat (limited to 'meta-facebook/meta-yosemite/recipes-yosemite/fbutils')
35 files changed, 4712 insertions, 0 deletions
diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/bic-util_0.1.bb b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/bic-util_0.1.bb new file mode 100644 index 0000000..86679d6 --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/bic-util_0.1.bb @@ -0,0 +1,21 @@ +# Copyright 2015-present Facebook. All Rights Reserved. +SUMMARY = "Bridge IC Utility" +DESCRIPTION = "Util for checking with Bridge IC on Yosemite" +SECTION = "base" +PR = "r1" +LICENSE = "GPLv2" +LIC_FILES_CHKSUM = "file://bic-util.c;beginline=4;endline=16;md5=b395943ba8a0717a83e62ca123a8d238" + +SRC_URI = "file://bic-util \ + " + +S = "${WORKDIR}/bic-util" + +do_install() { + install -d ${D}${bindir} + install -m 0755 bic-util ${D}${bindir}/bic-util +} + +DEPENDS += "libbic" + +FILES_${PN} = "${bindir}" diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/fbutils_0.1.bb b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/fbutils_0.1.bb new file mode 100644 index 0000000..9a9f5fe --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/fbutils_0.1.bb @@ -0,0 +1,102 @@ +# Copyright 2014-present Facebook. All Rights Reserved. +# +# This program file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program in a file named COPYING; if not, write to the +# Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301 USA +SUMMARY = "Utilities" +DESCRIPTION = "Various utilities" +SECTION = "base" +PR = "r1" +LICENSE = "GPLv2" +LIC_FILES_CHKSUM = "file://COPYING;md5=eb723b61539feef013de476e68b5c50a" + +SRC_URI = "file://ast-functions \ + file://us_console.sh \ + file://sol-util \ + file://power_led.sh \ + file://power_util.py \ + file://post_led.sh \ + file://reset_usb.sh \ + file://setup-gpio.sh \ + file://setup_rov.sh \ + file://mdio.py \ + file://bcm5396.py \ + file://bcm5396_util.py \ + file://mount_data0.sh \ + file://eth0_mac_fixup.sh \ + file://yosemite_power.sh \ + file://power-on.sh \ + file://wedge_us_mac.sh \ + file://setup_switch.py \ + file://create_vlan_intf \ + file://watch-fc.sh \ + file://fcswitcher.sh \ + file://rc.early \ + file://rc.local \ + file://src \ + file://COPYING \ + " + +pkgdir = "utils" + +S = "${WORKDIR}" + +binfiles = "us_console.sh sol-util power_led.sh post_led.sh \ + reset_usb.sh mdio.py setup_rov.sh yosemite_power.sh wedge_us_mac.sh \ + bcm5396.py bcm5396_util.py setup_switch.py watch-fc.sh power_util.py" + +DEPENDS_append = "update-rc.d-native" + +do_install() { + dst="${D}/usr/local/fbpackages/${pkgdir}" + install -d $dst + install -m 644 ast-functions ${dst}/ast-functions + localbindir="${D}/usr/local/bin" + install -d ${localbindir} + for f in ${binfiles}; do + install -m 755 $f ${dst}/${f} + ln -s ../fbpackages/${pkgdir}/${f} ${localbindir}/${f} + done + + # common lib and include files + install -d ${D}${includedir}/facebook + install -m 0644 src/include/log.h ${D}${includedir}/facebook/log.h + install -m 0644 src/include/i2c-dev.h ${D}${includedir}/facebook/i2c-dev.h + + # init + install -d ${D}${sysconfdir}/init.d + install -d ${D}${sysconfdir}/rcS.d + # the script to mount /mnt/data + install -m 0755 ${WORKDIR}/mount_data0.sh ${D}${sysconfdir}/init.d/mount_data0.sh + update-rc.d -r ${D} mount_data0.sh start 03 S . + install -m 0755 ${WORKDIR}/rc.early ${D}${sysconfdir}/init.d/rc.early + update-rc.d -r ${D} rc.early start 04 S . + install -m 755 setup-gpio.sh ${D}${sysconfdir}/init.d/setup-gpio.sh + update-rc.d -r ${D} setup-gpio.sh start 59 S . + # create VLAN intf automatically + #install -d ${D}/${sysconfdir}/network/if-up.d + #install -m 755 create_vlan_intf ${D}${sysconfdir}/network/if-up.d/create_vlan_intf + # networking is done after rcS, any start level within rcS + # for mac fixup should work + #install -m 755 eth0_mac_fixup.sh ${D}${sysconfdir}/init.d/eth0_mac_fixup.sh + #update-rc.d -r ${D} eth0_mac_fixup.sh start 70 S . + install -m 755 power-on.sh ${D}${sysconfdir}/init.d/power-on.sh + update-rc.d -r ${D} power-on.sh start 85 S . + #install -m 755 fcswitcher.sh ${D}${sysconfdir}/init.d/fcswitcher.sh + #update-rc.d -r ${D} fcswitcher.sh start 90 S . + install -m 0755 ${WORKDIR}/rc.local ${D}${sysconfdir}/init.d/rc.local + update-rc.d -r ${D} rc.local start 99 2 3 4 5 . +} + +FILES_${PN} += "/usr/local ${sysconfdir}" diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/COPYING b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/COPYING new file mode 100644 index 0000000..3912109 --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/COPYING @@ -0,0 +1,340 @@ + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc. + 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Library General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + <one line to give the program's name and a brief idea of what it does.> + Copyright (C) <year> <name of author> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) year name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + <signature of Ty Coon>, 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Library General +Public License instead of this License. diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/ast-functions b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/ast-functions new file mode 100644 index 0000000..f29514f --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/ast-functions @@ -0,0 +1,147 @@ +# Copyright 2014-present Facebook. All Rights Reserved. +DEVMEM=/sbin/devmem + +devmem_set_bit() { + local addr + local val + addr=$1 + val=$($DEVMEM $addr) + val=$((val | (0x1 << $2))) + $DEVMEM $addr 32 $val +} + +devmem_clear_bit() { + local addr + local val + addr=$1 + val=$($DEVMEM $addr) + val=$((val & ~(0x1 << $2))) + $DEVMEM $addr 32 $val +} + +scu_addr() { + echo $((0x1E6E2000 + 0x$1)) +} + +GPIODIR="/sys/class/gpio" +GPIOEXPORT="$GPIODIR/export" + +gpio_dir() { + echo "$GPIODIR/gpio$1" +} + +gpio_name2value() { + local first remaining base val + remaining=$1 + val=0 + while [ -n "$remaining" ]; do + first=${remaining:0:1} + case "$first" in + [[:lower:]]) + base=$(printf "%d" "'$first'") + base=$((base - 96)) + val=$((val * 26 + base)) + ;; + [[:upper:]]) + base=$(printf "%d" "'$first'") + base=$((base - 64)) + val=$((val * 26 + base)) + ;; + *) + if [ $val -gt 0 ]; then + val=$((val-1)) + fi + val=$((val * 8 + $remaining)) + break + ;; + esac + remaining=${remaining:1} + done + echo "$val" +} + +gpio_export() { + local gpio + gpio=$(gpio_name2value $1) + dir=$(gpio_dir $gpio) + if [ ! -d ${dir} ]; then + echo $gpio > $GPIOEXPORT + fi +} + +gpio_set() { + local gpio + local val + gpio=$(gpio_name2value $1) + val=$2 + dir=$(gpio_dir $gpio) + if [ ! -d ${dir} ]; then + echo $gpio > $GPIOEXPORT + fi + echo out > ${dir}/direction + echo $val > ${dir}/value +} + +gpio_get() { + local gpio + local val + gpio=$(gpio_name2value $1) + dir=$(gpio_dir $gpio) + if [ ! -d ${dir} ]; then + echo $gpio > $GPIOEXPORT + fi + echo in > ${dir}/direction + cat ${dir}/value +} + +# Check to see if BMC power-on-reset +is_bmc_por() { + local val + # Read the Watch Dog Counter + val=$(devmem 0x1e785010 2>/dev/null) + if [ "$((val & 0xff00))" == "0" ]; then + # Power ON Reset + echo 1 + else + echo 0 + fi +} + +# Check to see if server is present in given slot or not +is_server_prsnt() { + local prsnt + + case $1 in + 1) + prsnt=$(gpio_get H5) + ;; + 2) + prsnt=$(gpio_get H4) + ;; + 3) + prsnt=$(gpio_get H7) + ;; + 4) + prsnt=$(gpio_get H6) + ;; + *) + prsnt=$(gpio_get H4) + ;; + esac + + if [ $prsnt == "0" ]; then + echo 1 + else + echo 0 + fi +} + +yosemite_is_server_on() { + local curr_pwr_cpu + curr_pwr_cpu=$(python -c 'import sys; sys.path.append("/usr/local/fbpackages/utils"); import power_util; print power_util.get_pwr_cpu()') + if [ $curr_pwr_cpu == "1" ]; then + echo 1 + else + echo 0 + fi +} diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/at93c46.py b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/at93c46.py new file mode 100644 index 0000000..9fa9f05 --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/at93c46.py @@ -0,0 +1,276 @@ +# Copyright 2004-present Facebook. All rights reserved. +# +# This program file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program in a file named COPYING; if not, write to the +# Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301 USA +# + +import subprocess +import struct +import sys + +class VerboseLogger: + def __init__(self, verbose=False): + self.verbose = verbose + + def _verbose_print(self, caption, bytestream=None): + ''' + Print a bytestream to stdout if verbose is enabled. + ''' + if self.verbose: + if bytestream is not None: + sys.stderr.write("{}: {}\n".format(caption, " ".join(['{:02X}'.format(ord(x)) for x in bytestream]))) + else: + sys.stderr.write("{}\n".format(caption)) + +class AT93C46SPI(VerboseLogger): + '''The class to access AT93C46 through SPI intf''' + SPI_CMD = 'spi-bb' + + def __init__(self, bus_width, gpio_cs, gpio_ck, gpio_do, gpio_di, + verbose=False): + if bus_width != 8 and bus_width != 16: + raise Exception("Invalid bus width for AT93C46!") + + self.bus_width = bus_width + self.gpio_cs = gpio_cs + self.gpio_ck = gpio_ck + self.gpio_do = gpio_do + self.gpio_di = gpio_di + self.verbose = verbose + + self.addr_bits = 6 if self.bus_width == 16 else 7 + self.addr_mask = 0x3F if self.bus_width == 16 else 0x7F + + def __shift(self, bytestream, value): + ''' + Shift an entire byte stream by value bits. + ''' + binary = "".join(['{:08b}'.format(ord(x)) for x in bytestream]) + if value > 0: + binary = binary[value:] + '0' * value + else: + binary = '0' * (-value) + binary[:value] + return "".join([chr(int(binary[x:x+8],2)) for x in range(0, len(binary), 8)]) + + def __io(self, op, addr, data=None): + ''' + Perform an IO operation against the EEPROM + ''' + write_bits = self.addr_bits + 3 + if data is not None: + # If giving data, we are doing a write command so + # no need to read any data. + write_bits = write_bits + self.bus_width + read_bits = 0 + else: + # If not giving data, we are doing either a read + # command or a set command, so read the result. + # We pad with an extra bit due to a dummy bit introduced + # by a delay for address decoding on chip. + read_bits = self.addr_bits + 4 + self.bus_width + + # Format the command itself + cmd_loc = 6 if self.bus_width == 16 else 7 + instruction = addr & self.addr_mask + instruction = instruction | ((0x4 | (op & 0x3)) << cmd_loc) + if data is not None: + if self.bus_width == 16: + write_data = struct.pack(">HH", instruction, data & 0xFFFF) + else: + write_data = struct.pack(">HB", instruction, data & 0xFF) + else: + write_data = struct.pack(">H", instruction) + write_data = self.__shift(write_data, 16 - (cmd_loc + 3)) + + self._verbose_print("Write data", write_data) + + # Run the command with the bitbang driver + if read_bits > 0: + data_portion = "-r {} -w {}".format(read_bits, write_bits) + else: + data_portion = "-w {}".format(write_bits) + + cmd = "{} -s {} -c {} -o {} -i {} -b {}".format( + self.SPI_CMD, self.gpio_cs, self.gpio_ck, self.gpio_do, + self.gpio_di, data_portion + ) + + self._verbose_print("Command: {}".format(cmd)) + + out = subprocess.Popen(cmd.split(), + stdout=subprocess.PIPE, + stdin = subprocess.PIPE)\ + .communicate(input=write_data) + + # Format the response + read_data = self.__shift(out[0], cmd_loc + 4) + if self.bus_width == 16: + read_data = read_data[:2] + self._verbose_print("Read data", read_data) + return struct.unpack(">H", read_data)[0] + else: + read_data = read_data[:1] + self._verbose_print("Read data", read_data) + return struct.unpack(">B", read_data)[0] + + def read(self, addr): + return self.__io(0x2, addr) + + def ewen(self): + self.__io(0x0, 0x3 << (self.addr_bits - 2)) + + def erase(self, addr): + self.__io(0x3, addr) + + def write(self, addr, data): + self.__io(0x1, addr, data) + + def eral(self): + self.__io(0x0, 0x2 << (self.addr_bits - 2)) + + def wral(self, data): + self.__io(0x0, 0x1 << (self.addr_bits - 2), data) + + def ewds(self): + self.__io(0x0, 0x0) + +class AT93C46(VerboseLogger): + ''' + The class which handles accessing memory on the AT93C46 chip. + ''' + AT93C46_MEMORY_SIZE = 128 + + def __init__(self, bus_width, gpio_cs, gpio_ck, gpio_do, gpio_di, + byte_swap, verbose=False): + self.bus_width = bus_width + self.verbose = verbose + self.byte_swap = byte_swap + + self.spi = AT93C46SPI(bus_width=bus_width, gpio_cs=gpio_cs, + gpio_ck=gpio_ck, gpio_do=gpio_do, + gpio_di=gpio_di, verbose=verbose) + + def __swap(self, value): + ''' + Swap bytes for a 16-bit integer if instructed to do so. + ''' + if self.bus_width == 16: + if self.byte_swap: + return ((value >> 8) & 0xFF) | ((value << 8) & 0xFF00) + else: + return value + else: + return value + + def erase(self, offset=None, limit=None): + ''' + Erase the chip. + ''' + if offset is None: + offset = 0 + if limit is None: + limit = self.AT93C46_MEMORY_SIZE + + if offset < 0 or offset + limit > self.AT93C46_MEMORY_SIZE: + raise Exception("Erase would be out of bounds!") + if self.bus_width == 16 and \ + ((offset & 1) != 0 or ((offset + limit) & 1) != 0): + raise Exception("Erase can't start or end on odd boundary in 16-bit mode!") + + if offset == 0 and limit == self.AT93C46_MEMORY_SIZE: + # Special case when we are erasing the entire chip + self.spi.ewen() + self.spi.eral() + self.spi.ewds() + + self._verbose_print("Erased entire chip") + else: + # Regular case + if self.bus_width == 16: + real_offset = offset / 2 + real_limit = limit / 2 + else: + real_offset = offset + real_limit = limit + + self.spi.ewen() + for addr in range(real_offset, real_offset + real_limit): + self.spi.erase(addr) + self.spi.ewds() + + self._verbose_print("Erased {} bytes from offset {}".format(limit, offset)) + + def read(self, offset=None, limit=None): + ''' + Read the chip into a memory buffer. + ''' + if offset is None: + offset = 0 + if limit is None: + limit = self.AT93C46_MEMORY_SIZE + + if offset < 0 or offset + limit > self.AT93C46_MEMORY_SIZE: + raise Exception("Read would be out of bounds!") + if self.bus_width == 16 and \ + ((offset & 1) != 0 or ((offset + limit) & 1) != 0): + raise Exception("Read can't start or end on odd boundary in 16-bit mode!") + + output = "" + if self.bus_width == 16: + real_offset = offset / 2 + real_limit = limit / 2 + pack_instruction = "=H" + else: + real_offset = offset + real_offset + pack_instruction = "=B" + + for addr in range(real_offset, real_offset + real_limit): + output = output + struct.pack(pack_instruction, self.__swap(self.spi.read(addr))) + + self._verbose_print("Read {} bytes from offset {}".format(limit, offset), output) + + return output + + def write(self, data, offset=None): + ''' + Write a memory buffer to the chip. + ''' + if offset is None: + offset = 0 + + if offset < 0 or offset + len(data) > self.AT93C46_MEMORY_SIZE: + raise Exception("Write would be out of bounds!") + if self.bus_width == 16 and \ + ((offset & 1) != 0 or ((offset + len(data)) & 1) != 0): + raise Exception("Write can't start or end on odd boundary in 16-bit mode!") + + if self.bus_width == 16: + offset_divisor = 2 + pack_instruction = "=H" + else: + offset_divisor = 1 + pack_instruction = "=B" + + self.spi.ewen() + for addr in range(offset, offset + len(data), offset_divisor): + actual_addr = addr / offset_divisor + value = self.__swap(struct.unpack(pack_instruction, data[(addr - offset):(addr - offset) + offset_divisor])[0]) + + self.spi.erase(actual_addr) + self.spi.write(actual_addr, value) + self.spi.ewds() + + self._verbose_print("Wrote {} bytes from offset {}".format(len(data), offset), data) diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/at93c46_util.py b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/at93c46_util.py new file mode 100755 index 0000000..c10f879 --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/at93c46_util.py @@ -0,0 +1,194 @@ +#!/usr/bin/python -S +# Copyright 2004-present Facebook. All rights reserved. +# +# This program file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program in a file named COPYING; if not, write to the +# Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301 USA +# + +from argparse import ArgumentParser +from at93c46 import AT93C46, AT93C46SPI +import sys + +def get_raw(args): + return AT93C46SPI(args.bus_width, args.cs, args.clk, args.mosi, args.miso, + args.verbose) + +def get_chip(args): + return AT93C46(args.bus_width, args.cs, args.clk, args.mosi, args.miso, + args.byte_swap, args.verbose) + +def access_parser(ap): + # Default, based on currenct HW configuration + SPI_CS_DEFAULT = 68 + SPI_CLK_DEFAULT = 69 + SPI_MOSI_DEFAULT = 70 + SPI_MISO_DEFAULT = 71 + + spi_group = ap.add_argument_group('SPI Access') + spi_group.add_argument('--cs', type=int, default=SPI_CS_DEFAULT, + help='The GPIO number for SPI CS pin (default: %s)' + % SPI_CS_DEFAULT) + spi_group.add_argument('--clk', type=int, default=SPI_CLK_DEFAULT, + help='The GPIO number for SPI CLK pin (default: %s)' + % SPI_CLK_DEFAULT) + spi_group.add_argument('--mosi', type=int, default=SPI_MOSI_DEFAULT, + help='The GPIO number for SPI MOSI pin (default: %s)' + % SPI_MOSI_DEFAULT) + spi_group.add_argument('--miso', type=int, default=SPI_MISO_DEFAULT, + help='The GPIO number for SPI MISO pin (default: %s)' + % SPI_MISO_DEFAULT) + +def bus_width_parser(ap): + # Default, based on currenct HW configuration + AT83C46_BUS_WIDTH = 16 + + bus_group = ap.add_argument_group('Bus Width') + bus_group.add_argument('--bus-width', type=int, default=AT83C46_BUS_WIDTH, + help='The configured bus width (default: %s)' + % AT83C46_BUS_WIDTH) + +def read_raw(args): + raw = get_raw(args) + val = raw.read(args.address) + + if args.int: + print "{}".format(val) + else: + if args.bus_width == 16: + print "0x{:04X}".format(val) + else: + print "0x{:02X}".format(val) + +def write_raw(args): + if args.value[:2] == "0x": + value = int(args.value, 16) + else: + value = int(args.value) + + raw = get_raw(args) + raw.ewen() + raw.erase(args.address) + raw.write(args.address, value) + raw.ewds() + +def erase_raw(args): + raw = get_raw(args) + raw.ewen() + raw.erase(args.address) + raw.ewds() + +def raw_subparser(subparsers): + raw_parser = subparsers.add_parser('raw', help='Raw memory access') + raw_sub = raw_parser.add_subparsers() + + read_parser = raw_sub.add_parser('read', help='Read a single memory address') + read_parser.add_argument('address', type=int, help='The memory address') + read_parser.add_argument('--int', action='store_true', + help='Display output as an integer') + read_parser.set_defaults(func=read_raw) + + write_parser = raw_sub.add_parser('write', help='Write a single memory address') + write_parser.add_argument('address', type=int, help='The memory address') + write_parser.add_argument('value', type=str, help='The value to write, either integer or hex') + write_parser.set_defaults(func=write_raw) + + erase_parser = raw_sub.add_parser('erase', help='Erase a single memory address') + erase_parser.add_argument('address', type=int, help='The memory address') + erase_parser.set_defaults(func=erase_raw) + +def read_chip(args): + chip = get_chip(args) + data = chip.read(args.start, args.length) + + if args.file is None: + sys.stdout.write(data) + else: + fp = open(args.file, "wb") + fp.write(data) + +def write_chip(args): + chip = get_chip(args) + + # Either way, limit reads to the size of the chip + if args.file is None: + data = sys.stdin.read(AT93C46.AT93C46_MEMORY_SIZE) + else: + fp = open(args.file, "rb") + data = fp.read(AT93C46.AT93C46_MEMORY_SIZE) + + if args.length is not None: + # Make sure length is correct + if len(data) < args.length: + data = data + '\x00' * (args.length - len(data)) + if len(data) > args.length: + data = data[:args.length] + + chip.write(data, args.start) + +def erase_chip(args): + chip = get_chip(args) + chip.erase(args.start, args.length) + +def chip_subparser(subparsers): + chip_parser = subparsers.add_parser('chip', help='Chip-level access') + chip_sub = chip_parser.add_subparsers() + + read_parser = chip_sub.add_parser('read', help='Read from the chip') + read_parser.add_argument('--start', type=int, + help='The memory address to start at (default: 0)') + read_parser.add_argument('--length', type=int, + help='The number of bytes to read (default: whole chip)') + read_parser.add_argument('--file', type=str, + help='File to operate on (default: stdout)') + read_parser.add_argument('--byte-swap', action='store_true', + help='Byte swap values for 16-bit reads/writes') + read_parser.set_defaults(func=read_chip) + + write_parser = chip_sub.add_parser('write', help='Write to the chip') + write_parser.add_argument('--start', type=int, + help='The memory address to start at (default: 0)') + write_parser.add_argument('--length', type=int, + help='The number of bytes to write (default: file length)') + write_parser.add_argument('--file', type=str, + help='File to operate on (default: stdin)') + write_parser.add_argument('--byte-swap', action='store_true', + help='Byte swap values for 16-bit reads/writes') + write_parser.set_defaults(func=write_chip) + + erase_parser = chip_sub.add_parser('erase', help='Erase the chip') + erase_parser.add_argument('--start', type=int, + help='The memory address to start at (default: 0)') + erase_parser.add_argument('--length', type=int, + help='The number of bytes to erase (default: whole chip)') + erase_parser.set_defaults(func=erase_chip) + +if __name__ == "__main__": + # General arguments + ap = ArgumentParser() + ap.add_argument('--verbose', action='store_true', + help='Print verbose debugging information') + + # SPI and bus width arguments + access_parser(ap) + bus_width_parser(ap) + + # Functionality + subparsers = ap.add_subparsers() + raw_subparser(subparsers) + chip_subparser(subparsers) + + # Command runner + args = ap.parse_args() + args.func(args) diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/bcm5396.py b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/bcm5396.py new file mode 100644 index 0000000..e1aba47 --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/bcm5396.py @@ -0,0 +1,452 @@ +# +# Copyright 2004-present Facebook. All rights reserved. +# +# This program file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program in a file named COPYING; if not, write to the +# Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301 USA +# + +import subprocess +import time + +class Bcm5396MDIO: + '''The class to access BCM5396 through MDIO intf''' + MDIO_CMD = 'mdio-bb' + + PHYADDR = 0x1E + + ACCESS_CTRL_REG = 16 + IO_CTRL_REG = 17 + STATUS_REG = 18 + DATA0_REG = 24 + DATA1_REG = 25 + DATA2_REG = 26 + DATA3_REG = 27 + + def __init__(self, mdc, mdio): + self.mdc = mdc + self.mdio = mdio + self.page = -1 + + def __io(self, op, reg, val=0): + cmd = '%s -p -c %s -d %s %s %s %s' \ + % (self.MDIO_CMD, self.mdc, self.mdio, op, str(self.PHYADDR), + str(reg)) + if op == 'write': + cmd += ' %s' % val + out = subprocess.Popen(cmd.split(), stdout=subprocess.PIPE)\ + .communicate()[0] + if op == 'write': + return val + # need to parse the result for read + rc = 0 + for line in out.split('\n'): + if not line.startswith('Read:'): + continue + rc = int(line.split(':')[1], 0) + return rc + + def __read_mdio(self, reg): + return self.__io('read', reg) + + def __write_mdio(self, reg, val): + return self.__io('write', reg, val) + + def __set_page(self, page): + if self.page == page: + return + # Write MII register ACCESS_CTRL_REG: + # set bit 0 as "1" to enable MDIO access + # set "page number to bit 15:8 + val = 0x1 | ((page & 0xff) << 8) + self.__write_mdio(self.ACCESS_CTRL_REG, val) + self.page = page + + def __wait_for_done(self): + # Read MII register IO_CTRL_REG: + # Check op_code = "00" + while (self.__read_mdio(self.IO_CTRL_REG) & 0x3): + time.sleep(0.010) # 10ms + + def read(self, page, reg, n_bytes): + self.__set_page(page) + # Write MII register IO_CTRL_REG: + # set "Operation Code as "00" + # set "Register Address" to bit 15:8 + val = 0x00 | ((reg & 0xff) << 8) + self.__write_mdio(self.IO_CTRL_REG, val) + # Write MII register IO_CTRL_REG: + # set "Operation Code as "10" + # set "Register Address" to bit 15:8 + val = 0x2 | ((reg & 0xff) << 8) + self.__write_mdio(self.IO_CTRL_REG, val) + self.__wait_for_done() + # Read MII register DATA0_REG for bit 15:0 + val = long(self.__read_mdio(self.DATA0_REG)) + # Read MII register DATA1_REG for bit 31:16 + val |= self.__read_mdio(self.DATA1_REG) << 16 + # Read MII register DATA2_REG for bit 47:32 + val |= self.__read_mdio(self.DATA2_REG) << 32 + # Read MII register DATA3_REG for bit 63:48 + val |= self.__read_mdio(self.DATA3_REG) << 48 + return val + + def write(self, page, reg, val, n_bytes): + self.__set_page(page) + # Write MII register DATA0_REG for bit 15:0 + self.__write_mdio(self.DATA0_REG, val & 0xFFFF) + # Write MII register DATA1_REG for bit 31:16 + self.__write_mdio(self.DATA1_REG, (val >> 16) & 0xFFFF) + # Write MII register DATA2_REG for bit 47:32 + self.__write_mdio(self.DATA2_REG, (val >> 32) & 0xFFFF) + # Write MII register DATA3_REG for bit 63:48 + self.__write_mdio(self.DATA3_REG, (val >> 48) & 0xFFFF) + # Write MII register IO_CTRL_REG: + # set "Operation Code as "00" + # set "Register Address" to bit 15:8 + val = 0x00 | ((reg & 0xff) << 8) + self.__write_mdio(self.IO_CTRL_REG, val) + # Write MII register IO_CTRL_REG: + # set "Operation Code as "01" + # set "Register Address" to bit 15:8 + val = 0x1 | ((reg & 0xff) << 8) + self.__write_mdio(self.IO_CTRL_REG, val) + self.__wait_for_done() + + +class Bcm5396SPI: + '''The class to access BCM5396 through SPI interface''' + SPI_CMD = 'spi-bb' + + READ_CMD = 0x60 + WRITE_CMD = 0x61 + + SPI_STS_DIO = 0xF0 + SPI_STS_REG = 0xFE + SPI_STS_REG_RACK = 0x1 << 5 + SPI_STS_REG_SPIF = 0x1 << 7 + PAGE_REG = 0xFF + + def __init__(self, cs, clk, mosi, miso): + self.cs = cs + self.clk = clk + self.mosi = mosi + self.miso = miso + self.page = -1 + + def __bytes2val(self, values): + # LSB first, MSB last + pos = 0 + result = 0L + for byte in values: + if type(byte) is str: + byte = int(byte, 16) + if byte > 255: + raise Exception('%s is not a byte in the list %s'\ + % (byte, values)) + result |= byte << pos + pos += 8 + return result + + def __val2bytes(self, value, n): + result = [] + for _ in range(n): + result.append(value & 0xFF) + value >>= 8 + if value > 0: + raise Exception('Value, %s, is too large for %s bytes' + % (value, n)) + return result + + def __io(self, bytes_to_write, to_read=0): + # TODO: check parameters + cmd = '%s -s %s -S low -c %s -o %s -i %s '\ + % (self.SPI_CMD, self.cs, self.clk, self.mosi, self.miso) + if len(bytes_to_write): + write_cmd = '-w %s %s '\ + % (len(bytes_to_write) * 8, + ' '.join([str(byte) for byte in bytes_to_write])) + else: + write_cmd = '' + if to_read: + # spi-bb will first return the exact number of bits used for + # writing. So, total number of bits to read should also include + # the number of bits written. + cmd += '-r %s ' % str((len(bytes_to_write) + to_read) * 8) + cmd += write_cmd + rc = 0L + out = subprocess.Popen(cmd.split(), stdout=subprocess.PIPE)\ + .communicate()[0] + if to_read: + # need to parse the result + for line in out.split('\n'): + if not line.startswith('Read'): + continue + res = line.split(':')[1] + rc = self.__bytes2val(res.split()[len(bytes_to_write):]) + break + return rc + + def __set_page(self, page): + page &= 0xff + if self.page == page: + return + self.__io([self.WRITE_CMD, self.PAGE_REG, page]) + self.page = page + + def __read_spi_reg(self, reg): + reg &= 0xFF + return self.__io([self.READ_CMD, reg], 1) + + def __read_spi_sts(self): + return self.__read_spi_reg(self.SPI_STS_REG) + + def __read_spi_dio(self): + return self.__read_spi_reg(self.SPI_STS_DIO) + + def read(self, page, reg, n_bytes): + '''Read a register value from a page.''' + if n_bytes > 8: + print('TODO to support reading more than 8 bytes') + return 0 + if page > 0xff or reg > 0xff: + print('Page and register must be <= 255') + return 0 + try: + self.__set_page(page) + self.__io([self.READ_CMD, reg], 1) + while True: + # check sts + sts = self.__read_spi_sts() + if sts & self.SPI_STS_REG_RACK: + break + bytes = [] + for _ in range(n_bytes): + bytes.append(self.__read_spi_dio()) + except Exception as e: + print(e) + return self.__bytes2val(bytes) + + def write(self, page, reg, val, n_bytes): + '''Write a value as n bytes to a register on a page.''' + if page > 0xff or reg > 0xff: + print('Page and register must be <= 255') + return + bytes = self.__val2bytes(val, n_bytes) + if len(bytes) > 8: + print('TODO to support writing more than 8 bytes') + return + bytes = [self.WRITE_CMD, reg] + bytes + try: + self.__set_page(page) + self.__io(bytes) + except Exception as e: + print(e) + +class Bcm5396: + '''The class for BCM5396 Switch''' + + MDIO_ACCESS = 0 + SPI_ACCESS = 1 + + def __init__(self, access, **kwargs): + if access == self.MDIO_ACCESS: + self.access = Bcm5396MDIO(**kwargs) + else: + self.access = Bcm5396SPI(**kwargs) + + def write(self, page, reg, value, n_bytes): + return self.access.write(page, reg, value, n_bytes) + + def read(self, page, reg, n_bytes): + return self.access.read(page, reg, n_bytes) + + def __add_remove_vlan(self, add, vid, untag, fwd, spt): + VLAN_PAGE = 0x5 + CTRL_ADDR = 0x60 + CTRL_START_DONE = (0x1 << 7) + VID_ADDR = 0x61 + ENTRY_ADDR = 0x63 + + fwd_map = self.__ports2portmap(fwd) + untag_map = self.__ports2portmap(untag) + + # mark it as write and stop the previous action + ctrl = 0 + self.write(VLAN_PAGE, CTRL_ADDR, ctrl, 1) + # write entry + if (add): + entry = 0x1L | ((spt & 0x1F) << 1) \ + | (fwd_map << 6) | (untag_map << 23) + else: + entry = 0x0L + self.write(VLAN_PAGE, ENTRY_ADDR, entry, 8) + # write vid as the index + self.write(VLAN_PAGE, VID_ADDR, vid & 0xFFF, 2) + # start the write + ctrl = CTRL_START_DONE + self.write(VLAN_PAGE, CTRL_ADDR, ctrl, 1) + while True: + ctrl = self.read(VLAN_PAGE, CTRL_ADDR, 1) + if not (ctrl & CTRL_START_DONE): + # done + break + time.sleep(0.010) # 10ms + + def add_vlan(self, vid, untag, fwd, spt=0): + return self.__add_remove_vlan(True, vid, untag, fwd, spt) + + def remove_vlan(self, vid): + return self.__add_remove_vlan(False, vid, [], [], 0) + + def get_vlan(self, vid): + VLAN_PAGE = 0x5 + CTRL_ADDR = 0x60 + CTRL_START_DONE = (0x1 << 7) + CTRL_READ = 0x1 + VID_ADDR = 0x61 + ENTRY_ADDR = 0x63 + + # mark it as read and stop the previous action + ctrl = CTRL_READ + self.write(VLAN_PAGE, CTRL_ADDR, ctrl, 1) + # write the vid as the index + self.write(VLAN_PAGE, VID_ADDR, vid & 0xFFF, 2) + # start the read + ctrl = CTRL_READ|CTRL_START_DONE + self.write(VLAN_PAGE, CTRL_ADDR, ctrl, 1) + while True: + ctrl = self.read(VLAN_PAGE, CTRL_ADDR, 1) + if not (ctrl & CTRL_START_DONE): + # done + break + time.sleep(0.010) # 10ms + entry = self.read(VLAN_PAGE, ENTRY_ADDR, 8) + res = {} + res['valid'] = True if entry & 0x1 else False + res['spt'] = (entry >> 1) & 0x1f + res['fwd'] = self.__portmap2ports((entry >> 6) & 0x1ffff) + res['untag'] = self.__portmap2ports((entry >> 23) & 0x1ffff) + return res + + def __portmap2ports(self, port_map): + return list(set([port if port_map & (0x1 << port) else None + for port in range (0, 17)]) + - set([None])) + + def __ports2portmap(self, ports): + port_map = 0 + for port in ports: + port_map |= (0x1 << port) + return port_map & 0x1FFFF + + def __parse_arl_result(self, vid, result): + is_bitset = lambda bit: True if result & (0x1 << bit) else False + if not is_bitset(3): + return None + res = {} + # parse vid first + res['vid'] = (vid >> 48) & 0xfff + mac_val = vid & 0xffffffffffffL + mac_list = [] + for pos in range(5, -1, -1): + mac_list.append('{:02x}'.format((mac_val >> (pos * 8)) & 0xff)) + res['mac'] = ':'.join(mac_list) + if mac_val & (0x1 << 40): + res['ports'] = self.__portmap2ports((result >> 6) & 0xffff) + else: + res['ports'] = [(result >> 6) & 0xf] + res['static'] = is_bitset(5) + res['age'] = is_bitset(4) + res['valid'] = is_bitset(3) + res['priority'] = result & 0x7 + return res + + def get_all_arls(self): + ARL_PAGE = 0x5 + SEARCH_CTRL_ADDR = 0x30 + SEARCH_CTRL_START_DONE = (0x1 << 7) + SEARCH_CTRL_SR_VALID = (0x1) + + VID0_ADDR = 0x33 + RESULT0_ADDR = 0x3B + VID1_ADDR = 0x40 + RESULT1_ADDR = 0x48 + + all = [] + # write START to search control + ctrl = SEARCH_CTRL_START_DONE + self.write(ARL_PAGE, SEARCH_CTRL_ADDR, ctrl, 1) + while True: + ctrl = self.read(ARL_PAGE, SEARCH_CTRL_ADDR, 1) + if not (ctrl & SEARCH_CTRL_START_DONE): + # Done + break + if not (ctrl & SEARCH_CTRL_SR_VALID): + # result is not ready, sleep and retry + time.sleep(0.010) # 10ms + continue + for vid_addr, result_addr in [[VID1_ADDR, RESULT1_ADDR], + [VID0_ADDR, RESULT0_ADDR]]: + vid = self.read(ARL_PAGE, vid_addr, 8) + result = self.read(ARL_PAGE, result_addr, 4) + one = self.__parse_arl_result(vid, result) + if one: + all.append(one) + return all + + def vlan_ctrl(self, enable): + VLAN_CTRL_PAGE = 0x34 + VLAN_CTRL0_REG = 0x0 + VLAN_CTRL0_B_EN_1QVLAN = 0x1 << 7 + + ctrl = self.read(VLAN_CTRL_PAGE, VLAN_CTRL0_REG, 1) + need_write = False + if enable: + if not ctrl & VLAN_CTRL0_B_EN_1QVLAN: + need_write = True; + ctrl |= VLAN_CTRL0_B_EN_1QVLAN + else: + if ctrl & VLAN_CTRL0_B_EN_1QVLAN: + need_write = True; + ctrl &= (~VLAN_CTRL0_B_EN_1QVLAN) & 0xFF + if need_write: + self.write(VLAN_CTRL_PAGE, VLAN_CTRL0_REG, ctrl, 1) + + def vlan_set_port_default(self, port, vid, pri=0): + VLAN_PORT_PAGE = 0x34 + VLAN_PORT_REG_BASE = 0x10 + + if port < 0 or port > 16: + raise Exception('Invalid port number %s' % port) + if pri < 0 or pri > 7: + raise Exception('Invalid priority %s' % pri) + if vid < 0 or vid > 0xFFF: + raise Exception('Invalid VLAN %s' % vid) + reg = VLAN_PORT_REG_BASE + port * 2 + ctrl = (pri << 13) | vid + self.write(VLAN_PORT_PAGE, reg, ctrl, 2) + + def vlan_get_port_default(self, port): + VLAN_PORT_PAGE = 0x34 + VLAN_PORT_REG_BASE = 0x10 + + if port < 0 or port > 16: + raise Exception('Invalid port number %s' % port) + reg = VLAN_PORT_REG_BASE + port * 2 + val = self.read(VLAN_PORT_PAGE, reg, 2) + res = {} + res['priority'] = (val >> 13) & 0x7 + res['vid'] = val & 0xFFF + return res diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/bcm5396_util.py b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/bcm5396_util.py new file mode 100644 index 0000000..1496412 --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/bcm5396_util.py @@ -0,0 +1,260 @@ +#!/usr/bin/python +# Copyright 2004-present Facebook. All rights reserved. +# +# This program file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program in a file named COPYING; if not, write to the +# Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301 USA +# + +from argparse import ArgumentParser +from bcm5396 import Bcm5396 + +def auto_long(x): + return long(x, 0) + +def auto_int(x): + return int(x, 0) + +def get_bcm(args): + if args.spi: + return Bcm5396(Bcm5396.SPI_ACCESS, cs=args.cs, clk=args.clk, + mosi=args.mosi, miso=args.miso) + else: + return Bcm5396(Bcm5396.MDIO_ACCESS, mdc=args.mdc, mdio=args.mdio) + + +def read_register(args): + bcm = get_bcm(args) + val = bcm.read(args.page, args.register, args.size) + print('Read from BCM5396 ({}:{}.{}): {}' + .format(hex(args.page), hex(args.register), args.size, hex(val))) + +def write_register(args): + bcm = get_bcm(args) + val = bcm.write(args.page, args.register, args.value, args.size) + print('Write to BCM5396 ({}.{}): {}' + .format(hex(args.page), hex(args.register), hex(args.value))) + +def register_parser(subparser): + reg_parser = subparser.add_parser('register', help='Register IO') + reg_sub = reg_parser.add_subparsers() + + read_parser = reg_sub.add_parser('read', help='read switch register') + read_parser.set_defaults(func=read_register) + read_parser.add_argument('page', type=auto_int, + help='The page of the register') + read_parser.add_argument('register', type=auto_int, + help='The register to read from') + read_parser.add_argument('size', type=auto_int, + help='Number of bytes', + choices=range(1, 9)) + + write_parser = reg_sub.add_parser('write', help='write switch register') + write_parser.set_defaults(func=write_register) + write_parser.add_argument('page', type=auto_int, + help='The page oof the register') + write_parser.add_argument('register', type=auto_int, + help='The register to write to') + write_parser.add_argument('value', type=auto_long, + help='The value to write') + write_parser.add_argument('size', type=auto_int, + help='Number of bytes', + choices=range(1, 9)) + + +def dump_arl(args): + bcm = get_bcm(args) + arls = bcm.get_all_arls() + print('All ARLs are:') + for entry in arls: + print(entry) + +def arl_parser(subparser): + dump_parser = subparser.add_parser('arl', help='dump all ARL entries') + dump_parser.set_defaults(func=dump_arl) + + +def __parse_port_list(parm): + '''Parse the port numbers to a list''' + if len(parm) == 0: + return [] + ports=[] + for port in parm.split(','): + idx = port.find('-') + if idx == -1: + p = int(port) + if p < 0 or p > 15: + raise Exception('Invalid port number %s' % p) + # just one port + ports.append(p) + else: + start = int(port[:idx]) + end = int(port[idx+1:]) + if start > end or start < 0 or end > 15: + raise Exception('Invalid port range %s-%s' % (start, end)) + ports.extend(range(start, end + 1)) + return ports + +def enable_vlan(args): + bcm = get_bcm(args) + bcm.vlan_ctrl(True) + print('VLAN function is enabled.') + +def disable_vlan(args): + bcm = get_bcm(args) + bcm.vlan_ctrl(False) + print('VLAN function is disabled.') + +def add_vlan(args): + bcm = get_bcm(args) + vid = args.vid + fwd = sorted(__parse_port_list(args.fwd)) + untag = sorted(__parse_port_list(args.untag)) + spt = args.spt + # make sure untag is subset of fwd + if not set(untag).issubset(set(fwd)): + raise Exception('Some untagged ports, %s, are not part of forward ports' + % (set(untag) - set(fwd))) + bcm.add_vlan(vid, untag, fwd, spt) + print('Added VLAN: %s' % vid) + print('Ports in VLAN: %s' % sorted(fwd)) + print('Ports without VLAN tag: %s' % sorted(untag)) + +def remove_vlan(args): + bcm = get_bcm(args) + vid = args.vid + bcm.remove_vlan(vid) + print('Removed VLAN: %s' % vid) + +def show_vlan(args): + bcm = get_bcm(args) + vid = args.vid + vlan = bcm.get_vlan(vid) + if not vlan['valid']: + print('VLAN %s does not exist' % vid) + else: + print('VLAN: %s' % vid) + print('Spanning tree index: %s' % vlan['spt']) + print('Ports in VLAN: %s' % sorted(vlan['fwd'])) + print('Untagged ports in VLAN: %s' % sorted(vlan['untag'])) + +def set_port_vlan(args): + bcm = get_bcm(args) + bcm.vlan_set_port_default(args.port, args.vid, args.pri) + print('Set VLAN default for port: %s' % args.port) + print('Default VLAN: %s' % args.vid) + print('Default priority %s' % args.pri) + +def get_port_vlan(args): + bcm = get_bcm(args) + port = bcm.vlan_get_port_default(args.port) + print('Get VLAN default for port: %s' % args.port) + print('Default VLAN: %s' % port['vid']) + print('Default priority: %s' % port['priority']) + +def vlan_parser(subparser): + UNTAG_DEFAULT = '' + SPT_DEFAULT = 0 + PRI_DEFAULT = 0 + + vlan_parser = subparser.add_parser('vlan', help='Manage vlan function') + vlan_sub = vlan_parser.add_subparsers() + + add_parser = vlan_sub.add_parser('add', help='Add or modify a VLAN entry') + add_parser.add_argument('vid', type=int, help='The VLAN ID') + add_parser.add_argument('fwd', type=str, + help='Ports belonging to this VLAN. i.e. 1,4,5-8') + add_parser.add_argument('untag', type=str, default=UNTAG_DEFAULT, nargs='?', + help='Ports that do not add VLAN tag. i.e. 1,4,5-8' + ' (default: all ports are tagged)') + add_parser.add_argument('spt', type=int, default=SPT_DEFAULT, nargs='?', + help='Spanning tree index (default: %s)' + % SPT_DEFAULT) + add_parser.set_defaults(func=add_vlan) + + remove_parser = vlan_sub.add_parser('remove', help='Remove a VLAN entry') + remove_parser.add_argument('vid', type=int, help='The VLAN ID') + remove_parser.set_defaults(func=remove_vlan) + + show_parser = vlan_sub.add_parser('show', help='Show a VLAN entry') + show_parser.add_argument('vid', type=int, help='The VLAN ID') + show_parser.set_defaults(func=show_vlan) + + enable_parser = vlan_sub.add_parser('enable', help='Enable VLAN function') + enable_parser.set_defaults(func=enable_vlan) + + disable_parser = vlan_sub.add_parser('disable', help='Enable VLAN function') + disable_parser.set_defaults(func=disable_vlan) + + port_parser = vlan_sub.add_parser('port', + help='Set/Get VLAN default for a port') + port_sub = port_parser.add_subparsers() + set_port = port_sub.add_parser('set', help='Set VLAN default for a port') + set_port.add_argument('port', type=int, help='The port number (0..16)') + set_port.add_argument('vid', type=int, + help='The default VLAN for this port') + set_port.add_argument('pri', type=int, default=PRI_DEFAULT, nargs='?', + help='The default priority for this port ' + '(default: %s)' % PRI_DEFAULT) + set_port.set_defaults(func=set_port_vlan) + + get_port = port_sub.add_parser('get', help='Get VLAN default for a port') + get_port.add_argument('port', type=int, help='The port number (0..16)') + get_port.set_defaults(func=get_port_vlan) + +def access_parser(ap): + SPI_CS_DEFAULT = 68 + SPI_CLK_DEFAULT = 69 + SPI_MOSI_DEFAULT = 70 + SPI_MISO_DEFAULT = 71 + + MDIO_MDC_DEFAULT = 6 + MDIO_MDIO_DEFAULT = 7 + + spi_group = ap.add_argument_group('SPI Access') + spi_group.add_argument('--spi', action='store_true', + help='Access through SPI.') + spi_group.add_argument('--cs', type=int, default=SPI_CS_DEFAULT, + help='The GPIO number for SPI CS pin (default: %s)' + % SPI_CS_DEFAULT) + spi_group.add_argument('--clk', type=int, default=SPI_CLK_DEFAULT, + help='The GPIO number for SPI CLK pin (default: %s)' + % SPI_CLK_DEFAULT) + spi_group.add_argument('--mosi', type=int, default=SPI_MOSI_DEFAULT, + help='The GPIO number for SPI MOSI pin (default: %s)' + % SPI_MOSI_DEFAULT) + spi_group.add_argument('--miso', type=int, default=SPI_MISO_DEFAULT, + help='The GPIO number for SPI MISO pin (default: %s)' + % SPI_MISO_DEFAULT) + mdio_group = ap.add_argument_group('MDIO Access (default)') + mdio_group.add_argument('--mdc', type=int, default=MDIO_MDC_DEFAULT, + help='The GPIO number for MDC pin (default: %s)' + % MDIO_MDC_DEFAULT) + mdio_group.add_argument('--mdio', type=int, default=MDIO_MDIO_DEFAULT, + help='The GPIO number for MDIO pin (default: %s)' + % MDIO_MDIO_DEFAULT) + return ap + + +if __name__ == '__main__': + ap = ArgumentParser() + access_parser(ap) + + subparsers = ap.add_subparsers() + register_parser(subparsers) + arl_parser(subparsers) + vlan_parser(subparsers) + args = ap.parse_args() + + args.func(args) diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/bic-util/Makefile b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/bic-util/Makefile new file mode 100644 index 0000000..9c046be --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/bic-util/Makefile @@ -0,0 +1,10 @@ +# Copyright 2015-present Facebook. All Rights Reserved. +all: bic-util + +bic-util: bic-util.c + $(CC) -pthread -lipmi -lipmb -lbic -std=c99 -o $@ $^ $(LDFLAGS) + +.PHONY: clean + +clean: + rm -rf *.o bic-util diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/bic-util/bic-util.c b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/bic-util/bic-util.c new file mode 100644 index 0000000..4a8966d --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/bic-util/bic-util.c @@ -0,0 +1,384 @@ +/* + * bic-util + * + * Copyright 2015-present Facebook. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <errno.h> +#include <syslog.h> +#include <stdint.h> +#include <pthread.h> +#include <facebook/bic.h> +#include <openbmc/ipmi.h> + +#define LAST_RECORD_ID 0xFFFF +#define MAX_SENSOR_NUM 0xFF +#define BYTES_ENTIRE_RECORD 0xFF + +// Test to Get device ID +static void +util_get_device_id(uint8_t slot_id) { + int ret; + ipmi_dev_id_t id = {0}; + + ret = bic_get_dev_id(slot_id, &id); + if (ret) { + printf("util_get_device_id: bic_get_dev_id returns %d\n", ret); + return; + } + + // Print response + printf("Device ID: 0x%X\n", id.dev_id); + printf("Device Revision: 0x%X\n", id.dev_rev); + printf("Firmware Revision: 0x%X:0x%X\n", id.fw_rev1, id.fw_rev2); + printf("IPMI Version: 0x%X\n", id.ipmi_ver); + printf("Device Support: 0x%X\n", id.dev_support); + printf("Manufacturer ID: 0x%X:0x%X:0x%X\n", id.mfg_id[2], id.mfg_id[1], id.mfg_id[0]); + printf("Product ID: 0x%X:0x%X\n", id.prod_id[1], id.prod_id[0]); + printf("Aux. FW Rev: 0x%X:0x%X:0x%X:0x%X\n", id.aux_fw_rev[0], id.aux_fw_rev[1],id.aux_fw_rev[2],id.aux_fw_rev[3]); +} + +// Tests for reading GPIO values and configuration +static void +util_get_gpio(uint8_t slot_id) { + int ret; + bic_gpio_t gpio = {0}; + + ret = bic_get_gpio(slot_id, &gpio); + if (ret) { + printf("util_get_gpio: bic_get_gpio returns %d\n", ret); + return; + } + + bic_gpio_u *t = (bic_gpio_u*) &gpio; + + // Print response + printf("PWRGOOD_CPU: %d\n", t->bits.pwrgood_cpu); + printf("PWRGOOD_PCH_PWROK: %d\n", t->bits.pwrgd_pch_pwrok); + printf("PVDDR_VRHOT_N: %d\n", t->bits.pvddr_vrhot_n); + printf("PVCCIN_VRHOT_N: %d\n", t->bits.pvccin_vrhot_n); + printf("FM_FAST_PROCHOT_N: %d\n", t->bits.fm_fast_prochot_n); + printf("PCHHOT_CPU_N: %d\n", t->bits.pchhot_cpu_n); + printf("FM_CPLD_CPU_DIMM_EVENT_C0_N: %d\n", t->bits.fm_cpld_cpu_dimm_event_c0_n); + printf("FM_CPLD_BDXDE_THERMTRIP_N: %d\n", t->bits.fm_cpld_bdxde_thermtrip_n); + printf("THERMTRIP_PCH_N: %d\n", t->bits.thermtrip_pch_n); + printf("FM_CPLD_FIVR_FAULT: %d\n", t->bits.fm_cpld_fivr_fault); + printf("FM_BDXDE_CATERR_LVT3_N: %d\n", t->bits.fm_bdxde_caterr_lvt3_n); + printf("FM_BDXDE_ERR_LVT3_N: %d\n", t->bits.fm_bdxde_err_lvt3_n); + printf("SLP_S4_N: %d\n", t->bits.slp_s4_n); + printf("FM_NMI_EVENT_BMC_N: %d\n", t->bits.fm_nmi_event_bmc_n); + printf("FM_SMI_BMC_N: %d\n", t->bits.fm_smi_bmc_n); + printf("RST_PLTRST_BMC_N: %d\n", t->bits.rst_pltrst_bmc_n); + printf("FP_RST_BTN_BUF_N: %d\n", t->bits.fp_rst_btn_buf_n); + printf("BMC_RST_BTN_OUT_N: %d\n", t->bits.bmc_rst_btn_out_n); + printf("FM_BDE_POST_CMPLT_N: %d\n", t->bits.fm_bde_post_cmplt_n); + printf("FM_BDXDE_SLP3_N: %d\n", t->bits.fm_bdxde_slp3_n); + printf("FM_PWR_LED_N: %d\n", t->bits.fm_pwr_led_n); + printf("PWRGD_PVCCIN: %d\n", t->bits.pwrgd_pvccin); + printf("SVR_ID: %d\n", t->bits.svr_id); + printf("BMC_READY_N: %d\n", t->bits.bmc_ready_n); + printf("BMC_COM_SW_N: %d\n", t->bits.bmc_com_sw_n); + printf("rsvd: %d\n", t->bits.rsvd); +} + +static void +util_get_gpio_config(uint8_t slot_id) { + int ret; + int i; + bic_gpio_config_t gpio_config = {0}; + bic_gpio_config_u *t = (bic_gpio_config_u *) &gpio_config; + + // Read configuration of all bits + for (i = 0; i < MAX_GPIO_PINS; i++) { + ret = bic_get_gpio_config(slot_id, i, &gpio_config); + if (ret == -1) { + continue; + } + + printf("gpio_config for pin#%d:\n", i); + printf("Direction: %s", t->bits.dir?"Output":"Input"); + printf("Interrupt Enabled?: %s", t->bits.ie?"Enabled":"Disabled"); + printf("Trigger Type: %s", t->bits.edge?"Level":"Edge"); + if (t->bits.trig == 0x0) { + printf("Trigger Edge: %s\n", "Falling Edge"); + } else if (t->bits.trig == 0x1) { + printf("Trigger Edge: %s\n", "Falling Edge"); + } else if (t->bits.trig == 0x2) { + printf("Trigger Edge: %s\n", "Both Edges"); + } else { + printf("Trigger Edge: %s\n", "Reserved"); + } + } +} + +static void +util_get_config(uint8_t slot_id) { + int ret; + int i; + bic_config_t config = {0}; + bic_config_u *t = (bic_config_u *) &config; + + ret = bic_get_config(slot_id, &config); + if (ret) { + printf("util_get_config: bic_get_config failed\n"); + return; + } + + printf("SoL Enabled?: %s", t->bits.sol? "Enabled" : "Disabled"); + printf("POST Enabled?: %s", t->bits.post? "Enabled" : "Disabled"); + printf("KCS Enabled?: %s", t->bits.kcs? "Enabled" : "Disabled"); + printf("IPMB Enabled?: %s", t->bits.ipmb? "Enabled" : "Disabled"); +} + +static void +util_set_config(uint8_t slot_id, uint8_t status) { + +} + +// Test to get the POST buffer +static void +util_get_post_buf(uint8_t slot_id) { + int ret; + uint8_t buf[MAX_IPMB_RES_LEN] = {0x0}; + uint8_t len; + int i; + + ret = bic_get_post_buf(slot_id, buf, &len); + if (ret) { + printf("util_get_post_buf: bic_get_post_buf returns %d\n", ret); + return; + } + + printf("util_get_post_buf: returns %d bytes\n", len); + for (i = 0; i < len; i++) { + printf("0x%X:", buf[i]); + } + printf("\n"); +} + +// Tests to read FRUID of Monolake Server +static void +util_get_fruid_info(uint8_t slot_id) { + int ret; + int i; + + ipmi_fruid_info_t info = {0}; + + ret = bic_get_fruid_info(slot_id, 0, &info); + if (ret) { + printf("util_get_fruid_info: bic_get_fruid_info returns %d\n", ret); + return; + } + + printf("FRUID info for 1S Slot..\n"); + + printf("FRUID Size: %d\n", (info.size_msb << 8) + (info.size_lsb)); + printf("Accessed as : %s\n", (info.bytes_words)?"Words":"Bytes"); +} + +static void +util_read_fruid(uint8_t slot_id) { + int ret; + int i; + + char path[64] = {0}; + sprintf(path, "/tmp/fruid_slot%d.bin", slot_id); + + ret = bic_read_fruid(slot_id, 0, path); + if (ret) { + printf("util_read_fruid: bic_read_fruid returns %d\n", ret); + return; + } +} + +// Tests to read SEL from Monolake Server +static void +util_get_sel_info(uint8_t slot_id) { + int ret; + + ipmi_sel_sdr_info_t info; + + ret = bic_get_sel_info(slot_id, &info); + if (ret) { + printf("util_get_sel_info:bic_get_sel_info returns %d\n", ret); + return; + } + + printf("SEL info for 1S Slot is..\n"); + + printf("version: 0x%X\n", info.ver); + printf("Record Count: 0x%X\n", info.rec_count); + printf("Free Space: 0x%X\n", info.free_space); + printf("Recent Add TS: 0x%X:0x%X:0x%X:0x%X\n", info.add_ts[3], info.add_ts[2], info.add_ts[1], info.add_ts[0]); + printf("Recent Erase TS: 0x%X:0x%X:0x%X:0x%X\n", info.erase_ts[3], info.erase_ts[2], info.erase_ts[1], info.erase_ts[0]); + printf("Operation Support: 0x%X\n", info.oper); +} + +static void +util_get_sel(uint8_t slot_id) { + int ret; + int i; + uint16_t rsv; + uint8_t rlen; + uint8_t rbuf[MAX_IPMB_RES_LEN] = {0}; + + ipmi_sel_sdr_req_t req; + ipmi_sel_sdr_res_t *res = (ipmi_sel_sdr_res_t *) rbuf; + + req.rsv_id = 0; + req.rec_id = 0; + req.offset = 0; + req.nbytes = BYTES_ENTIRE_RECORD; + + while (1) { + ret = bic_get_sel(slot_id, &req, res, &rlen); + if (ret) { + printf("util_get_sel:bic_get_sel returns %d\n", ret); + continue; + } + + printf("SEL for rec_id %d\n", req.rec_id); + printf("Next Record ID is %d\n", res->next_rec_id); + printf("Record contents are..\n"); + for (i = 0; i < rlen-2; i++) { // First 2 bytes are next_rec_id + printf("0x%X:", res->data[i]); + } + printf("\n"); + + req.rec_id = res->next_rec_id; + if (req.rec_id == LAST_RECORD_ID) { + printf("This record is LAST record\n"); + break; + } + } +} + +// Tests to read SDR records from Monolake Servers +static void +util_get_sdr_info(uint8_t slot_id) { + int ret; + + ipmi_sel_sdr_info_t info; + + ret = bic_get_sdr_info(slot_id, &info); + if (ret) { + printf("util_get_sdr_info:bic_get_sdr_info returns %d\n", ret); + return; + } + + printf("SDR info for 1S Slot is..\n"); + + printf("version: 0x%X\n", info.ver); + printf("Record Count: 0x%X\n", info.rec_count); + printf("Free Space: 0x%X\n", info.free_space); + printf("Recent Add TS: 0x%X:0x%X:0x%X:0x%X\n", info.add_ts[3], info.add_ts[2], info.add_ts[1], info.add_ts[0]); + printf("Recent Erase TS: 0x%X:0x%X:0x%X:0x%X\n", info.erase_ts[3], info.erase_ts[2], info.erase_ts[1], info.erase_ts[0]); + printf("Operation Support: 0x%X\n", info.oper); +} + +static void +util_get_sdr(uint8_t slot_id) { + int ret; + int i; + uint16_t rsv; + uint8_t rlen; + uint8_t rbuf[MAX_IPMB_RES_LEN] = {0}; + + ipmi_sel_sdr_req_t req; + ipmi_sel_sdr_res_t *res = (ipmi_sel_sdr_res_t *) rbuf; + + req.rsv_id = 0; + req.rec_id = 0; + req.offset = 0; + req.nbytes = BYTES_ENTIRE_RECORD; + + while (1) { + ret = bic_get_sdr(slot_id, &req, res, &rlen); + if (ret) { + printf("util_get_sdr:bic_get_sdr returns %d\n", ret); + continue; + } + + sdr_full_t *sdr = res->data; + + printf("type: %d, ", sdr->type); + printf("sensor_num: %d, ", sdr->sensor_num); + printf("sensor_type: %d, ", sdr->sensor_type); + printf("evt_read_type: %d, ", sdr->evt_read_type); + printf("m_val: %d, ", sdr->m_val); + printf("m_tolerance: %d, ", sdr->m_tolerance); + printf("b_val: %d, ", sdr->b_val); + printf("b_accuracy: %d, ", sdr->b_accuracy); + printf("accuracy_dir: %d, ", sdr->accuracy_dir); + printf("rb_exp: %d,\n", sdr->rb_exp); + + req.rec_id = res->next_rec_id; + if (req.rec_id == LAST_RECORD_ID) { + printf("This record is LAST record\n"); + break; + } + } +} + +// Test to read all Sensors from Monolake Server +static void +util_read_sensor(uint8_t slot_id) { + int ret; + int i; + ipmi_sensor_reading_t sensor; + + for (i = 0; i < MAX_SENSOR_NUM; i++) { + ret = bic_read_sensor(slot_id, i, &sensor); + if (ret) { + continue; + } + + printf("sensor#%d: value: 0x%X, flags: 0x%X, status: 0x%X, ext_status: 0x%X\n", + i, sensor.value, sensor.flags, sensor.status, sensor.ext_status); + } +} + +// TODO: Make it as User selectable tests to run +int +main(int argc, char **argv) { + + uint8_t slot_id; + + slot_id = atoi(argv[1]); + + util_get_device_id(slot_id); + + util_get_gpio(slot_id); + util_get_gpio_config(slot_id); + + util_get_config(slot_id); + + util_get_post_buf(slot_id); + + util_get_fruid_info(slot_id); + util_read_fruid(slot_id); + + util_get_sel_info(slot_id); + util_get_sel(slot_id); + + util_get_sdr_info(slot_id); + util_get_sdr(slot_id); + util_read_sensor(slot_id); +} diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/create_vlan_intf b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/create_vlan_intf new file mode 100644 index 0000000..2cf7a9a --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/create_vlan_intf @@ -0,0 +1,37 @@ +#!/bin/bash +# +# Copyright 2014-present Facebook. All Rights Reserved. +# +# This program file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program in a file named COPYING; if not, write to the +# Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301 USA +# + +# only care about 'eth0' and 'oob' intf +[ "$IFACE" != "eth0" ] && [ "$IFACE" != "oob" ] && exit 0 + +. /usr/local/fbpackages/utils/ast-functions + +board=$(wedge_board_type) + +[ "$board" = "WEDGE" ] && exit 0 + +vlan=4088 +intf="${IFACE}.${vlan}" +slot=$(wedge_slot_id $board) + +vconfig add $IFACE $vlan +ifconfig $intf up "fe80::$(printf "%x" $slot):1/64" + +exit 0 diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/eth0_mac_fixup.sh b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/eth0_mac_fixup.sh new file mode 100644 index 0000000..1cdbcb6 --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/eth0_mac_fixup.sh @@ -0,0 +1,41 @@ +#!/bin/bash +# +# Copyright 2014-present Facebook. All Rights Reserved. +# +# This program file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program in a file named COPYING; if not, write to the +# Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301 USA +# + +### BEGIN INIT INFO +# Provides: eth0_mac_fixup.sh +# Required-Start: +# Required-Stop: +# Default-Start: S +# Default-Stop: +# Short-Description: Fixup the MAC address for eth0 based on wedge EEPROM +### END INIT INFO + +PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin + +mac=$(weutil 2>/dev/null | grep '^Local MAC' 2>/dev/null | cut -d' ' -f3 2>/dev/null) + +if [ -n "$mac" ]; then + ifconfig eth0 hw ether $mac + # compare the 'ethaddr' from u-boot env + ethaddr=$(fw_printenv ethaddr 2>/dev/null | cut -d'=' -f2 2>/dev/null) + if [ "$ethaddr" != "$mac" ]; then + fw_setenv "ethaddr" "$mac" + fi +fi diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/fcswitcher.sh b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/fcswitcher.sh new file mode 100755 index 0000000..53e24f3 --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/fcswitcher.sh @@ -0,0 +1,83 @@ +#! /bin/sh +# +# Copyright 2014-present Facebook. All Rights Reserved. +# +# This program file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program in a file named COPYING; if not, write to the +# Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301 USA +# + +### BEGIN INIT INFO +# Provides: usbcons +# Required-Start: +# Required-Stop: +# Default-Start: S +# Default-Stop: 0 6 +# Short-Description: Creates a virtual USB serial device and starts a console +# on it. +# +### END INIT INFO + +PATH=/sbin:/bin:/usr/sbin:/usr/bin +NAME="FC Switcher" +DESC="FC Failover Daemon" + +# source function library +. /etc/init.d/functions + +. /usr/local/fbpackages/utils/ast-functions + +STOPPER= +ACTION="$1" + +case "$ACTION" in + start) + if [ "$(wedge_board_type)" = "LC" ]; then + # Ability to prevent this from starting by editing cmdline in u-boot. + # Keeping this here until I get gadget switching working properly. (t4906522) + /usr/local/bin/watch-fc.sh > /dev/null 2>&1 & + echo "$NAME." + else + echo 'skipping watch-fc.sh: only necessary on six-pack line cards.' + fi + ;; + stop) + echo -n "Stopping $DESC: " + killall watch-fc.sh + echo "$NAME." + ;; + restart|force-reload) + echo -n "Restarting $DESC: " + killall watch-fc.sh + if [ "$(wedge_board_type)" = "LC" ]; then + sleep 1 + /usr/local/bin/watch-fc.sh > /dev/null 2>&1 & + echo "$NAME." + else + echo 'skipping watch-fc.sh: only necessary on six-pack line cards.' + fi + ;; + status) + status watch-fc.sh + exit $? + ;; + *) + N=${0##*/} + N=${N#[SK]??} + echo "Usage: $N {start|stop|status|restart|force-reload}" >&2 + exit 1 + ;; +esac + +exit 0 diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/mdio.py b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/mdio.py new file mode 100755 index 0000000..aa7d4bf --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/mdio.py @@ -0,0 +1,124 @@ +#!/usr/bin/python +# +# Copyright 2014-present Facebook. All Rights Reserved. +# +# This program file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program in a file named COPYING; if not, write to the +# Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301 USA +# + +from argparse import ArgumentParser +import subprocess +import time + +IO_BASE = [ 0x1e660000, 0x1e680000 ] +PHYCR_REG_OFFSET = 0x60 +PHYCR_READ_BIT = 0x1 << 26 +PHYCR_WRITE_BIT = 0x1 << 27 +phycr_reg = lambda mac: IO_BASE[mac - 1] + PHYCR_REG_OFFSET +PHYDATA_REG_OFFSET = 0x64 +phydata_reg = lambda mac: IO_BASE[mac - 1] + PHYDATA_REG_OFFSET + + +devmem_read_cmd = lambda reg: [ 'devmem', hex(reg) ] +devmem_write_cmd = lambda reg, val: [ 'devmem', hex(reg), '32', hex(val)] + + +def devmem_read(reg): + cmd = devmem_read_cmd(reg) + #print('Cmd: {}'.format(cmd)) + out = subprocess.Popen(cmd, stdout=subprocess.PIPE).communicate()[0] + return int(out, 0) + + +def devmem_write(reg, val): + cmd = devmem_write_cmd(reg, val) + #print('Cmd: {}'.format(cmd)) + subprocess.Popen(cmd, stdout=subprocess.PIPE).communicate()[0] + + +def wait_for_mdio_done(args): + reg = phycr_reg(args.mac) + while devmem_read(reg) & (PHYCR_READ_BIT|PHYCR_WRITE_BIT): + time.sleep(0.010) # 10ms + + +def read_mdio(args): + reg = phycr_reg(args.mac) + ctrl = devmem_read(reg) + ctrl &= 0x3000003f + ctrl |= (args.phy & 0x1F) << 16 + ctrl |= (args.register & 0x1F) << 21 + ctrl |= PHYCR_READ_BIT + devmem_write(reg, ctrl) + wait_for_mdio_done(args) + val = devmem_read(phydata_reg(args.mac)) >> 16 + print('Read from PHY ({}.{}): {}' + .format(hex(args.phy), hex(args.register), hex(val))) + + +def write_mdio(args): + ctrl_reg = phycr_reg(args.mac) + ctrl = devmem_read(ctrl_reg) + ctrl &= 0x3000003f + ctrl |= (args.phy & 0x1F) << 16 + ctrl |= (args.register & 0x1F) << 21 + ctrl |= PHYCR_WRITE_BIT + data_reg = phydata_reg(args.mac) + # write data first + devmem_write(data_reg, args.value) + # then ctrl + devmem_write(ctrl_reg, ctrl) + wait_for_mdio_done(args) + print('Write to PHY ({}.{}): {}' + .format(hex(args.phy), hex(args.register), hex(args.value))) + + +def auto_int(x): + return int(x, 0) + +if __name__ == '__main__': + ap = ArgumentParser() + ap.add_argument('--mac', '-m', type=int, default=2, + help='The MAC') + ap.add_argument('--phy', '-p', type=auto_int, default=0x1f, + help='The PHY address') + + subparsers = ap.add_subparsers() + + read_parser = subparsers.add_parser('read', + help='read MDIO') + read_parser.set_defaults(func=read_mdio) + read_parser.add_argument('register', type=auto_int, + help='The register to read from') + + write_parser = subparsers.add_parser('write', + help='write MDIO') + write_parser.set_defaults(func=write_mdio) + write_parser.add_argument('register', type=auto_int, + help='The register to write to') + write_parser.add_argument('value', type=auto_int, + help='The value to write to') + + args = ap.parse_args() + + if args.mac != 2 and args.mac != 1: + print("MAC can only be either 1 or 2.") + exit(-1) + + if args.phy > 0x1f: + printf("PHY address must be smaller than 0x1f.") + exit(-2) + + args.func(args) diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/mount_data0.sh b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/mount_data0.sh new file mode 100755 index 0000000..6986be5 --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/mount_data0.sh @@ -0,0 +1,61 @@ +#!/bin/sh +# +# Copyright 2014-present Facebook. All Rights Reserved. +# +# This program file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program in a file named COPYING; if not, write to the +# Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301 USA +# + +### BEGIN INIT INFO +# Provides: mount_data0 +# Required-Start: mountvirtfs +# Required-Stop: +# Default-Start: S +# Default-Stop: +# Short-Description: Mount data0 partition from flash chip. +# Description: +### END INIT INFO + +. /etc/default/rcS + +# Find out which device maps to 'data0' on mtd +# Note: /proc/mtd lists partitions using mtdX, where X is a number, +# but we mount using /dev/mtdblockX. We'll do some magic here +# to get the mtdX (char device) and mtdblockX (block device) +# names. +MOUNT_POINT="/mnt/data" +DATA_CHAR_DEV=$(cat /proc/mtd | awk '{ if ($4 == "\"data0\"") print $1 }' | + cut -d ':' -f 1 | awk '{ print "/dev/" $1 }') +if [ -z "$DATA_CHAR_DEV" ] +then + echo "No data0 partition found. Not mounting anything to $MOUNT_POINT." +else + DEVICE_ID=$(echo $DATA_CHAR_DEV | tail -c 2) + DATA_BLOCK_DEV=${DATA_CHAR_DEV/mtd/mtdblock} + + echo "data0 partition found on $DATA_BLOCK_DEV; mounting to $MOUNT_POINT." + mount -t jffs2 $DATA_BLOCK_DEV $MOUNT_POINT + + # if the mount failed, format the partition and remount + if [ $? -ne 0 ] + then + echo "Mount failed; formatting $DATA_BLOCK_DEV and remounting." + flash_eraseall $DATA_CHAR_DEV + mount -t jffs2 $DATA_BLOCK_DEV $MOUNT_POINT + fi +fi + +: exit 0 + diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/post_led.sh b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/post_led.sh new file mode 100644 index 0000000..c23349f --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/post_led.sh @@ -0,0 +1,105 @@ +#!/bin/sh +# +# Copyright 2004-present Facebook. All rights reserved. +# +# This program file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program in a file named COPYING; if not, write to the +# Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301 USA +# + +usage() { + echo "Displays values onto the debug header LEDs." + echo "Hex and decimal accepted." + echo "Usage: $0 <value>" +} + +. /usr/local/fbpackages/utils/ast-functions + +# Function to set the less significant hex digit +display_lower() { + local bit0=$(expr $1 % 2) + local bit1=$(expr $1 / 2 % 2) + local bit2=$(expr $1 / 4 % 2) + local bit3=$(expr $1 / 8 % 2) + + # Set the pins to the correct operating mode. + # The relevant pins are GPIOG[0...3]. + # For GPIO bank G, SCU84[0..3] must be 0. + devmem_clear_bit $(scu_addr 84) 0 + devmem_clear_bit $(scu_addr 84) 1 + devmem_clear_bit $(scu_addr 84) 2 + devmem_clear_bit $(scu_addr 84) 3 + + # Now set the GPIOs to the right binary values + gpio_set 48 $bit0 + gpio_set 49 $bit1 + gpio_set 50 $bit2 + gpio_set 51 $bit3 +} + +# Function to set the more significant hex digit +display_upper() { + local bit0=$(expr $1 % 2) + local bit1=$(expr $1 / 2 % 2) + local bit2=$(expr $1 / 4 % 2) + local bit3=$(expr $1 / 8 % 2) + + # Set the pins to the correct operating mode. + # The relevant pins are GPIOB[4...7]. + # GPIOB4: SCU80[12] = 0 and Strap[14] = 0 + # GPIOB5: SCU80[13] = 0 + # GPIOB6: SCU80[14] = 0 + # GPIOB7: SCU80[15] = 0 + devmem_clear_bit $(scu_addr 70) 14 + devmem_clear_bit $(scu_addr 80) 12 + devmem_clear_bit $(scu_addr 80) 13 + devmem_clear_bit $(scu_addr 80) 14 + devmem_clear_bit $(scu_addr 80) 15 + + gpio_set 12 $bit0 + gpio_set 13 $bit1 + gpio_set 14 $bit2 + gpio_set 15 $bit3 +} + +# Check number of parameters +if [ $# -ne 1 ] +then + usage + exit 1 +fi + +# Make sure input is actually numeric +DEC_VALUE=$(printf "%d" $1 2>/dev/null) +if [ $? -eq 1 ] +then + echo "Unable to parse input as numeric value." + exit 1 +fi + +# Make sure input is within proper range +if [ $DEC_VALUE -lt 0 ] || [ $DEC_VALUE -gt 255 ] +then + echo "Value $DEC_VALUE is outside of displayable range 0 - 0xff (255)." + exit 1 +fi + +# Get upper/lower decimal values +LOWER_DEC_VALUE=$(expr $DEC_VALUE % 16) +UPPER_DEC_VALUE=$(expr $DEC_VALUE / 16) + +# Display the results +display_lower $LOWER_DEC_VALUE +display_upper $UPPER_DEC_VALUE + diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/power-on.sh b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/power-on.sh new file mode 100644 index 0000000..3a9ce06 --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/power-on.sh @@ -0,0 +1,99 @@ +#!/bin/sh +# +# Copyright 2014-present Facebook. All Rights Reserved. +# +# This program file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program in a file named COPYING; if not, write to the +# Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301 USA + +### BEGIN INIT INFO +# Provides: power-on +# Required-Start: +# Required-Stop: +# Default-Start: S +# Default-Stop: +# Short-Description: Power on Server +### END INIT INFO +. /usr/local/fbpackages/utils/ast-functions + +PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin + +# Disable Watch Dog Timer +/usr/local/bin/watchdog_ctrl.sh off + + +KEYDIR=/mnt/data/kv_store +DEF_PWR_ON=1 +TO_PWR_ON= + +check_por_config() +{ + + TO_PWR_ON=-1 + + # Check if the file/key doesn't exist + if [ ! -f "${KEYDIR}/slot${1}_por_cfg" ]; then + TO_PWR_ON=$DEF_PWR_ON + else + POR=`cat ${KEYDIR}/slot${1}_por_cfg` + + # Case ON + if [ $POR == "on" ]; then + TO_PWR_ON=1; + + # Case OFF + elif [ $POR == "off" ]; then + TO_PWR_ON=0; + + # Case LPS + elif [ $POR == "lps" ]; then + + # Check if the file/key doesn't exist + if [ ! -f "${KEYDIR}/pwr_server${1}_last_state" ]; then + TO_PWR_ON=$DEF_PWR_ON + else + LS=`cat ${KEYDIR}/pwr_server${1}_last_state` + if [ $LS == "on" ]; then + TO_PWR_ON=1; + elif [ $LS == "off" ]; then + TO_PWR_ON=0; + fi + fi + fi + fi +} + +# Check whether it is fresh power on reset +if [ $(is_bmc_por) -eq 1 ]; then + + check_por_config 1 + if [ $TO_PWR_ON -eq 1 ] && [ $(is_server_prsnt 1) == "1" ] ; then + power-util slot1 on + fi + + check_por_config 2 + if [ $TO_PWR_ON -eq 1 ] && [ $(is_server_prsnt 2) == "1" ] ; then + power-util slot2 on + fi + + check_por_config 3 + if [ $TO_PWR_ON -eq 1 ] && [ $(is_server_prsnt 3) == "1" ] ; then + power-util slot3 on + fi + + check_por_config 4 + if [ $TO_PWR_ON -eq 1 ] && [ $(is_server_prsnt 4) == "1" ] ; then + power-util slot4 on + fi +fi diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/power_led.sh b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/power_led.sh new file mode 100755 index 0000000..2f9bb6a --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/power_led.sh @@ -0,0 +1,58 @@ +#!/bin/bash +# +# Copyright 2014-present Facebook. All Rights Reserved. +# +# This program file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program in a file named COPYING; if not, write to the +# Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301 USA +# + +usage() { + echo "Usage: $1 <slot#> <on | off>" + exit -1 +} + +. /usr/local/fbpackages/utils/ast-functions + +PATH=/sbin:/bin:/usr/sbin:/usr/bin + +set -e + +if [ $# != 2 ]; then + usage $0 +fi + +# Slot#1: GPIOM1(97),Slot#2: GPIOM0(96),Slot#3: GPIOM3(99),Slot#4: GPIOM2(98) +if [ $1 = "1" ]; then + gpio=M1 +elif [ $1 = "2" ]; then + gpio=M0 +elif [ $1 = "3" ]; then + gpio=M3 +elif [ $1 = "4" ]; then + gpio=M2 +else + usage $0 +fi + + +if [ $2 = "on" ]; then + val=1 +elif [ $2 = "off" ]; then + val=0 +else + usage $0 +fi + +gpio_set $gpio $val diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/power_util.py b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/power_util.py new file mode 100644 index 0000000..d1cc60e --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/power_util.py @@ -0,0 +1,151 @@ +#!/usr/bin/env python +# +# Copyright 2015-present Facebook. All Rights Reserved. +# +# This program file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program in a file named COPYING; if not, write to the +# Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301 USA +# + +import os +import re +import time +import logging +from ctypes import * + +POR_DIR = '/mnt/data/power/por' +POR_CONFIG = '%s/config' % POR_DIR +POR_LPS = '%s/last_state' % POR_DIR + +logging.basicConfig(level=logging.INFO) +log = logging.getLogger(__name__) + +class PORConfig(): + on = "1" # Default ON + off = "2" # Default OFF + lps = "3" # Default is to use the Last Power State + +# Handler for Bridge IC libraries +bic = CDLL("libbic.so") + +class BIC_GPIO(Structure): + _fields_ = [ ("bic_gpio_data", c_char * 4) ] + +# Get 32-bit GPIO data +def get_bic_gpio(): + gpio = BIC_GPIO() + p_gpio = pointer(gpio) + bic.bic_get_gpio(p_gpio) + return gpio + +# Get the CPU power status +def get_pwr_cpu(): + gpio = get_bic_gpio() + pwrgood_cpu = (ord(gpio.bic_gpio_data[0]) & 0x01) + return pwrgood_cpu + +# Initilize the POR configuration files in /mnt/data +def init_por(): + + por = PORConfig() + + # For the Power On Reset Config + if not os.path.isfile(POR_CONFIG): + try: + os.makedirs(POR_DIR) + except OSERROR as err: + pass + + por_cnfg = open(POR_CONFIG, 'w') + por_cnfg.write('%s\n' % por.on) + por_cnfg.close() + + # For the Last Power State info + if not os.path.isfile(POR_LPS): + curr_time = int(time.time()) + lps = 'on %s' % str(curr_time) + + f_lps = open(POR_LPS, 'w') + f_lps.write('%s\n' % lps) + f_lps.close() + +# Get the POR config [ ON | OFF | LPS ] +def get_por_config(): + + por = PORConfig() + + if os.path.isfile(POR_CONFIG): + por_cnfg = open(POR_CONFIG, 'r') + cnfg = por_cnfg.read(1) + + if cnfg in [por.on, por.off, por.lps]: + return cnfg + else: + return 0 + else: + return -1 + +# To check whether the last power state was on or off +def get_por_lps(): + + if os.path.isfile(POR_LPS): + f_lps = open(POR_LPS, 'r') + lps = f_lps.readline() + if re.search(r'on', lps): + return 1 + elif re.search(r'off', lps): + return 0 + else: + return -1 + +# This tells whether to Power ON or not on POR +# 1 - Power ON +# 0 - Do not Power ON +def por_policy(): + + por = PORConfig() + cnfg = get_por_config() + if cnfg < 1: + log.error("power_util: Error getting the POR config.") + exit(-1) + + if (cnfg == por.on): + # cpu power ON + log.debug('ON: Powering ON') + return 1 + + elif (cnfg == por.off): + # cpu power OFF + log.debug('OFF: Powering OFF') + return 0 + + elif (cnfg == por.lps): + lps = get_por_lps() + if lps < 0: + log.error("power_util: Error getting the POR Last State.") + exit(-1) + + if lps == 1: + # cpu power ON + log.debug('LPS: Powering ON') + return 1 + + elif lps == 0: + # cpu power OFF + log.debug('LPS: Powering OFF') + return 0 + + +if __name__ == "__main__": + main() diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/rc.early b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/rc.early new file mode 100644 index 0000000..0f47c72 --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/rc.early @@ -0,0 +1,25 @@ +#!/bin/sh +# +# Copyright 2014-present Facebook. All Rights Reserved. +# +# This program file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program in a file named COPYING; if not, write to the +# Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301 USA +# +# This script will be executed at rcS S04 level, which is right after mount /mnt/data +# and before almost anything else. + +if [ -x /mnt/data/etc/rc.early ]; then + /mnt/data/etc/rc.early +fi diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/rc.local b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/rc.local new file mode 100644 index 0000000..36fa0f1 --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/rc.local @@ -0,0 +1,26 @@ +#!/bin/sh +# +# Copyright 2014-present Facebook. All Rights Reserved. +# +# This program file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program in a file named COPYING; if not, write to the +# Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301 USA +# + +# +# This script will be executed *after* all the other init scripts. + +if [ -x /mnt/data/etc/rc.local ]; then + /mnt/data/etc/rc.local +fi diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/reset_usb.sh b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/reset_usb.sh new file mode 100644 index 0000000..a7936b1 --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/reset_usb.sh @@ -0,0 +1,55 @@ +#!/bin/sh +# +# Copyright 2014-present Facebook. All Rights Reserved. +# +# This program file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program in a file named COPYING; if not, write to the +# Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301 USA +# + +. /usr/local/fbpackages/utils/ast-functions + +#TODO: Add logic to control mux based on front panel switch +echo -n "Set USB Mux to given slot ... " + +# USB_MUX_SEL signals: GPIOE4(36), GPIOE5(37) +slot=$1 + +case $slot in + 1) + gpio_set E4 1 + gpio_set E5 0 + ;; + 2) + gpio_set E4 0 + gpio_set E5 0 + ;; + 3) + gpio_set E4 1 + gpio_set E5 1 + ;; + 4) + gpio_set E4 0 + gpio_set E5 1 + ;; + *) + gpio_set E4 0 + gpio_set E5 0 + ;; +esac + +# Enable the USB MUX GPIOS3(147) +gpio_set S3 0 + +echo "Done" diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/setup-gpio.sh b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/setup-gpio.sh new file mode 100755 index 0000000..91797c5 --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/setup-gpio.sh @@ -0,0 +1,307 @@ +#!/bin/bash +# +# Copyright 2014-present Facebook. All Rights Reserved. +# +# This program file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program in a file named COPYING; if not, write to the +# Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301 USA +# + +### BEGIN INIT INFO +# Provides: gpio-setup +# Required-Start: +# Required-Stop: +# Default-Start: S +# Default-Stop: +# Short-Description: Set up GPIO pins as appropriate +### END INIT INFO + +# This file contains definitions for the GPIO pins that were not otherwise +# defined in other files. We should probably move some more of the +# definitions to this file at some point. + +# The commented-out sections are generally already defined elsewhere, +# and defining them twice generates errors. + +# The exception to this is the definition of the GPIO H0, H1, and H2 +# pins, which seem to adversely affect the rebooting of the system. +# When defined, the system doesn't reboot cleanly. We're still +# investigating this. + +. /usr/local/fbpackages/utils/ast-functions + +# Set up to read the board revision pins, Y0, Y1, Y2 +devmem_set_bit $(scu_addr 70) 19 +devmem_clear_bit $(scu_addr a4) 8 +devmem_clear_bit $(scu_addr a4) 9 +devmem_clear_bit $(scu_addr a4) 10 + +gpio_export Y0 +gpio_export Y1 +gpio_export Y2 + +# SLOT1_PRSNT_N, GPIOH5 (61) +# GPIOH5(61): SCU90[6], SCU90[7] shall be 0 +devmem_clear_bit $(scu_addr 90) 6 +devmem_clear_bit $(scu_addr 90) 7 + +gpio_export H5 + +# SLOT2_PRSNT_N, GPIOH4 (60) +# GPIOH4(60): SCU90[6], SCU90[7] shall be 0 +gpio_export H4 + +# SLOT3_PRSNT_N, GPIOH7 (63) +# GPIOH7(63): SCU90[6], SCU90[7] shall be 0 +gpio_export H7 + +# SLOT4_PRSNT_N, GPIOH6 (62) +# GPIOH6(62): SCU90[6], SCU90[7] shall be 0 +gpio_export H6 + +# BMC_PWR_BTN_IN_N, uServer power button in, on GPIO D0(24) +gpio_export D0 + +# PWR_SLOT1_BTN_N, 1S Server power out, on GPIO D3 +# GPIOD3(27): SCU90[1], SCU8C[9], and SCU70[21] shall be 0 +devmem_clear_bit $(scu_addr 90) 1 +devmem_clear_bit $(scu_addr 8c) 9 +devmem_clear_bit $(scu_addr 70) 21 + +gpio_set D3 1 + +# PWR_SLOT2_BTN_N, 1S Server power out, on GPIO D1 +# Make sure the Power Control Pin is Set properly +# GPIOD1(25): SCU90[1], SCU8C[8], and SCU70[21] shall be 0 + +devmem_clear_bit $(scu_addr 8c) 8 + +gpio_set D1 1 + +# PWR_SLOT3_BTN_N, 1S Server power out, on GPIO D7 +# GPIOD7(31): SCU90[1], SCU8C[11], and SCU70[21] shall be 0 +devmem_clear_bit $(scu_addr 8c) 11 + +gpio_set D7 1 + +# PWR_SLOT4_BTN_N, 1S Server power out, on GPIO D5 +# GPIOD5(29): SCU90[1], SCU8C[10], and SCU70[21] shall be 0 +devmem_clear_bit $(scu_addr 8c) 10 + +gpio_set D5 1 + +# SMB_SLOT0_NIC_ALERT_N, alert for 1S Server NIC I2C, GPIO B0 +devmem_clear_bit $(scu_addr 80) 8 + +gpio_export B0 + +# Setup GPIOs to Mux Enable: GPIOS3(147), Channel Select: GPIOE4(36), GPIOE5(37) + +# To use GPIOS3 (147), SCU8C[3], SCU94[0], and SCU94[1] must be 0 +devmem_clear_bit $(scu_addr 8C) 3 +devmem_clear_bit $(scu_addr 94) 0 +devmem_clear_bit $(scu_addr 94) 1 + +# To use GPIOE4 (36), SCU80[20], SCU8C[14], and SCU70[22] must be 0 +devmem_clear_bit $(scu_addr 80) 20 +devmem_clear_bit $(scu_addr 8C) 14 +devmem_clear_bit $(scu_addr 70) 22 + +# To use GPIOE5 (37), SCU80[21], SCU8C[14], and SCU70[22] must be 0 +devmem_clear_bit $(scu_addr 80) 21 +devmem_clear_bit $(scu_addr 8C) 14 +devmem_clear_bit $(scu_addr 70) 22 + +gpio_export S3 +gpio_export E4 +gpio_export E5 + +# BMC_HEARTBEAT_N, heartbeat LED, GPIO Q7 +devmem_clear_bit $(scu_addr 90) 28 + +gpio_export Q7 + +# USB_OC_N, resettable fuse tripped, GPIO Q6 +devmem_clear_bit $(scu_addr 90) 28 + +gpio_export Q6 + +# System SPI +# Strap 12 must be 0 and Strape 13 must be 1 +devmem_clear_bit $(scu_addr 70) 12 +devmem_set_bit $(scu_addr 70) 13 + +# DEBUG_PORT_UART_SEL_BMC_N: GPIOR1(137) +# To use GPIOR1, SCU88[25] must be 0 +devmem_clear_bit $(scu_addr 88) 25 + +gpio_export R1 + +# DEBUG UART Controls +# 4 signals: DEBUG_UART_SEL_0/1/2 and DEBUG_UART_RX_SEL_N +# GPIOE0 (32), GPIOE1 (33), GPIOE2 (34) and GPIOE3 (35) + +# To enable GPIOE0, SCU80[16], SCU8C[12], and SCU70[22] must be 0 +devmem_clear_bit $(scu_addr 80) 16 +devmem_clear_bit $(scu_addr 8C) 12 +devmem_clear_bit $(scu_addr 70) 22 + +gpio_set E0 0 + +# To enable GPIOE1, SCU80[17], SCU8C[12], and SCU70[22] must be 0 +devmem_clear_bit $(scu_addr 80) 17 + +gpio_set E1 0 + +# To enable GPIOE2, SCU80[18], SCU8C[13], and SCU70[22] must be 0 +devmem_clear_bit $(scu_addr 80) 18 +devmem_clear_bit $(scu_addr 8C) 13 + +gpio_set E2 1 + +# To enable GPIOE3, SCU80[19], SCU8C[13], and SCU70[22] must be 0 +devmem_clear_bit $(scu_addr 80) 19 + +gpio_set E3 1 + +# Enable GPIOY3: BoardId(Yosemite or Test system) +devmem_clear_bit $(scu_addr a4) 11 + +# Power LED for Slot#2: +# To use GPIOM0 (96), SCU90[4], SCU90[5], and SCU84[24] must be 0 +devmem_clear_bit $(scu_addr 90) 4 +devmem_clear_bit $(scu_addr 90) 5 +devmem_clear_bit $(scu_addr 84) 24 + +gpio_set M0 1 + +# Power LED for Slot#1: +# To use GPIOM1 (97), SCU90[4], SCU90[5], and SCU84[25] must be 0 +devmem_clear_bit $(scu_addr 84) 25 + +gpio_set M1 1 + +# Power LED for Slot#4: +# To use GPIOM2 (98), SCU90[4], SCU90[5], and SCU84[26] must be 0 +devmem_clear_bit $(scu_addr 84) 26 + +gpio_set M2 1 + +# Power LED for Slot#3: +# To use GPIOM3 (99), SCU90[4], SCU90[5], and SCU84[27] must be 0 +devmem_clear_bit $(scu_addr 84) 27 + +gpio_set M3 1 + +# Front Panel Hand Switch GPIO setup +# HAND_SW_ID1: GPIOR2(138) +# To use GPIOR2, SCU88[26] must be 0 +devmem_clear_bit $(scu_addr 88) 26 + +gpio_export R2 + +# HAND_SW_ID2: GPIOR3(139) +# To use GPIOR3, SCU88[27] must be 0 +devmem_clear_bit $(scu_addr 88) 27 + +gpio_export R3 + +# HAND_SW_ID4: GPIOR4(140) +# To use GPIOR4, SCU88[28] must be 0 +devmem_clear_bit $(scu_addr 88) 28 + +gpio_export R4 + + +# HAND_SW_ID8: GPIOR5(141) +# To use GPIOR5, SCU88[29] must be 0 +devmem_clear_bit $(scu_addr 88) 29 + +gpio_export R5 + +# LED POST CODES: 8 GPIO signals + +# LED_POSTCODE_0: GPIOG0 (48) +# To use GPIOG0, SCU84[0] must be 0 +devmem_clear_bit $(scu_addr 84) 0 + +gpio_set G0 0 + +# LED_POSTCODE_1: GPIOG1 (49) +# To use GPIOG1, SCU84[1] must be 0 +devmem_clear_bit $(scu_addr 84) 1 + +gpio_set G1 0 + +# LED_POSTCODE_2: GPIOG2 (50) +# To use GPIOG2, SCU84[2] must be 0 +devmem_clear_bit $(scu_addr 84) 2 + +gpio_set G2 0 + +# LED_POSTCODE_3: GPIOG3 (51) +# To use GPIOG3, SCU84[3] must be 0 +devmem_clear_bit $(scu_addr 84) 3 + +gpio_set G3 0 + +# LED_POSTCODE_4: GPIOP4 (124) +gpio_set P4 0 + +# LED_POSTCODE_5: GPIOP5 (125) +gpio_set P5 0 + +# LED_POSTCODE_6: GPIOP6 (126) +# To use GPIOP6, SCU88[22] must be 0 +devmem_clear_bit $(scu_addr 88) 22 + +gpio_set P6 0 + +# LED_POSTCODE_7: GPIOP7 (127) +# To use GPIOP7, SCU88[23] must be 0 +devmem_clear_bit $(scu_addr 88) 23 + +gpio_set P7 0 + +# BMC_READY_N: GPIOG6 (54) +# To use GPIOG6, SCU84[6] must be 0 +devmem_clear_bit $(scu_addr 84) 6 + +gpio_set G6 0 + +# BMC_RST_BTN_IN_N: GPIOS0 (144) +# To use GPIOS0, SCU8C[0] +devmem_clear_bit $(scu_addr 8c) 0 + +gpio_export S0 + +# RESET for all Slots +# RST_SLOT1_SYS_RESET_N: GPIOH1 (57) +# To use GPIOH1, SCU90[6], SCU90[7] must be 0 +devmem_clear_bit $(scu_addr 90) 6 +devmem_clear_bit $(scu_addr 90) 7 + +gpio_set H1 1 + +# RST_SLOT2_SYS_RESET_N: GPIOH0 (56) +# To use GPIOH0, SCU90[6], SCU90[7] must be 0 +gpio_set H0 1 + +# RST_SLOT3_SYS_RESET_N: GPIOH3 (59) +# To use GPIOH3, SCU90[6], SCU90[7] must be 0 +gpio_set H3 1 + +# RST_SLOT4_SYS_RESET_N: GPIOH2 (58) +# To use GPIOH2, SCU90[6], SCU90[7] must be 0 +gpio_set H2 1 diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/setup_rov.sh b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/setup_rov.sh new file mode 100755 index 0000000..749fe65 --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/setup_rov.sh @@ -0,0 +1,99 @@ +#!/bin/bash +# +# Copyright 2014-present Facebook. All Rights Reserved. +# +# This program file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program in a file named COPYING; if not, write to the +# Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301 USA +# + +# The T2 chip can prefer different input voltages, depending, presumably +# of manufacturing variations. We need to determine whether it wants +# 0.95V or 1.025V, reset the T2 to reduce total power usage, set the +# outgoing voltage on the first buck converter, and bring T2 up out of +# reset. + +. /usr/local/fbpackages/utils/ast-functions + +# read the T2 ROV after the GPIOs are enabled +t2_rov() { + local val0 val1 val2 + # Note that the values are *not* read in order. + val0=$(cat /sys/class/gpio/gpio58/value 2>/dev/null) + val1=$(cat /sys/class/gpio/gpio56/value 2>/dev/null) + val2=$(cat /sys/class/gpio/gpio57/value 2>/dev/null) + echo $((val0 | (val1 << 1) | (val2 << 2))) +} + +rov=$(t2_rov) + +# target_volts come from the data sheet and 18mV of loss and +# some fudging based on actual measurements to get either 1.025V +# or 0.95V at T2 +if [ $rov -eq 1 ]; then + target_volts=0x5a +elif [ $rov -eq 2 ]; then + target_volts=0x65 +else + echo "Unrecognized T2 ROV value $rov, setting failed." + exit 1 +fi +target_volts=$(( $target_volts * 1 )) # normalize to decimal + +# We shouldn't have to rmmod pmbus, because it hasn't been loaded yet, +# but if the script is rerun after the system is up, it may be necessary. +rmmod pmbus +reload=$? + +# Get current voltage value +cur_volts=$(i2cget -y 1 0x60 0x8b w) +cur_volts=$(( $cur_volts * 1 )) # normalize to decimal + +# Only bounce the T2 if we actually need to modify the voltage +if [ $cur_volts -ne $target_volts ]; then + # Set values before turning out output; we're using "PCIE, then MCS" + echo 1 > /sys/class/gpio/gpio42/value + echo 1 > /sys/class/gpio/gpio43/value + echo out > /sys/class/gpio/gpio42/direction + echo out > /sys/class/gpio/gpio43/direction + echo 0 > /sys/class/gpio/gpio16/value + echo out > /sys/class/gpio/gpio16/direction + # T2 is in reset; note that this may cause NMI messages on the uServer, + # which shouldn't be up anyway when this is first run. + + # Set the requested value to the current value to avoid rapid shifts + i2cset -y 1 0x60 0x21 $cur_volts w + # Enable the requested voltage + i2cset -y 1 0x60 0xd2 0x5a + i2cset -y 1 0x60 0xd3 0x5a + sleep 1 + + # Set the target voltage + i2cset -y 1 0x60 0x21 $target_volts w + + sleep 1 + + # Let T2 come out of reset + echo 1 > /sys/class/gpio/gpio16/value + echo "T2 ROV value set based on $rov." + sleep 2 + echo 0 > /sys/class/gpio/gpio42/value + echo 0 > /sys/class/gpio/gpio43/value +else + echo "T2 ROV already correctly set." +fi +# Bring back pmbus if necessary +if [ $reload -eq 0 ]; then + modprobe pmbus +fi diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/setup_switch.py b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/setup_switch.py new file mode 100644 index 0000000..995cec8 --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/setup_switch.py @@ -0,0 +1,49 @@ +#!/usr/bin/python +# +# Copyright 2004-present Facebook. All rights reserved. +# +# This program file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program in a file named COPYING; if not, write to the +# Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301 USA +# +# This script combines multiple switch configuration into one python script. +# All such configuration can be done directly through bcm5396_util.py. +# But, it turns out it took several seconds to just start the python script. +# Involking the script 16 times (2 to create vlan, 13 to set port vlan default, +# and 1 to enable vlan function) contributes 1 minute delay. + +from bcm5396 import Bcm5396 + +MDC_GPIO = 6 +MDIO_GPIO = 7 + +INTERNAL_VLAN = 4088 +DEFAULT_VLAN=4090 + +INTERNAL_PORTS = [3, 10, 1, 11, 0, 8, 2, 9, 4, 12, 14, 13] +FRONT_PORT=5 + +if __name__ == '__main__': + bcm = Bcm5396(Bcm5396.MDIO_ACCESS, mdc=MDC_GPIO, mdio=MDIO_GPIO) + # create default VLAN including internal ports and front panel + # port (un-tagged) + bcm.add_vlan(DEFAULT_VLAN, INTERNAL_PORTS + [FRONT_PORT], + INTERNAL_PORTS + [FRONT_PORT], 0) + # set ingress vlan for internal ports and front panel port to default vlan + for port in INTERNAL_PORTS + [FRONT_PORT]: + bcm.vlan_set_port_default(port, DEFAULT_VLAN, 0) + # create internal vlan including internal ports only (tagged) + bcm.add_vlan(INTERNAL_VLAN, [], INTERNAL_PORTS, 0) + # enable vlan + bcm.vlan_ctrl(True) diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/sol-util b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/sol-util new file mode 100755 index 0000000..3769a5b --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/sol-util @@ -0,0 +1,74 @@ +#!/bin/sh +# +# Copyright 2014-present Facebook. All Rights Reserved. +# +# This program file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program in a file named COPYING; if not, write to the +# Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301 USA +# + +BIN_CONSOLED="/usr/local/bin/consoled" +LOGFILE1="/tmp/consoled_$1_log-old" +LOGFILE2="/tmp/consoled_$1_log" + + +if [ "$1" == "slot1" ] || [ "$1" == "slot2" ] || [ "$1" == "slot3" ] || [ "$1" == "slot4" ] +then + SLOT=$1 +else + echo "Usage: sol-util [ slot1 | slot2 | slot3 | slot4 ]" + echo " sol-util [ slot1 | slot2 | slot3 | slot4 ] --force" + echo " sol-util [ slot1 | slot2 | slot3 | slot4 ] --history" + exit -1 +fi + +if [ $# -gt 1 ]; then + if [[ "$2" == "--history" ]]; then + cat $LOGFILE1 2>/dev/null + cat $LOGFILE2 2>/dev/null + exit 0 + fi +fi + +PS=$(ps | grep -e $BIN_CONSOLED | grep -e $SLOT) + +PID=$(ps | grep -e $BIN_CONSOLED | grep -e $SLOT | awk '{print $1}') + + +if [[ $PS =~ "term" ]] && [[ "$2" != "--force" ]]; then + echo "Another SOL session is running." + echo "Please use the \"--force\" option" + exit -1 +fi + +echo "You are in SOL session." +echo "Use ctrl-x to quit." +echo "-----------------------" +echo + +kill -9 -s TERM $PID 2>/dev/null + +if [[ "$2" == "--force" ]]; then + PID=$(ps | grep -e $BIN_CONSOLED | grep -e $SLOT | awk '{print $1}') + kill -9 -s TERM $PID 2>/dev/null +fi + +$BIN_CONSOLED $SLOT --term + +$BIN_CONSOLED $SLOT --buffer + +echo +echo +echo "-----------------------" +echo "Exit from SOL session." diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/src/include/i2c-dev.h b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/src/include/i2c-dev.h new file mode 100644 index 0000000..3b67afc --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/src/include/i2c-dev.h @@ -0,0 +1,364 @@ +/* + i2c-dev.h - i2c-bus driver, char device interface + + Copyright (C) 1995-97 Simon G. Vogl + Copyright (C) 1998-99 Frodo Looijaard <frodol@dds.nl> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + MA 02110-1301 USA. +*/ + +#ifndef _LINUX_I2C_DEV_H +#define _LINUX_I2C_DEV_H + +#include <linux/types.h> +#include <sys/ioctl.h> +#include <stddef.h> +#include <string.h> + + +/* -- i2c.h -- */ + +#define _I2C_MIN(a, b) (((a) <= (b)) ? (a) : (b)) + +/* + * I2C Message - used for pure i2c transaction, also from /dev interface + */ +struct i2c_msg { + __u16 addr; /* slave address */ + unsigned short flags; +#define I2C_CLIENT_PEC 0x04 /* Use Packet Error Checking */ +#define I2C_M_TEN 0x0010 /* this is a ten bit chip address */ +#define I2C_M_RD 0x0001 /* read data, from slave to master */ +#define I2C_S_EN 0x0002 /* read data, from slave to master */ +#define I2C_M_NOSTART 0x4000 /* if I2C_FUNC_PROTOCOL_MANGLING */ +#define I2C_M_REV_DIR_ADDR 0x2000 /* if I2C_FUNC_PROTOCOL_MANGLING */ +#define I2C_M_IGNORE_NAK 0x1000 /* if I2C_FUNC_PROTOCOL_MANGLING */ +#define I2C_M_NO_RD_ACK 0x0800 /* if I2C_FUNC_PROTOCOL_MANGLING */ +#define I2C_M_RECV_LEN 0x0400 /* length will be first received byte */ + short len; /* msg length */ + char *buf; /* pointer to msg data */ +}; + +/* To determine what functionality is present */ + +#define I2C_FUNC_I2C 0x00000001 +#define I2C_FUNC_10BIT_ADDR 0x00000002 +#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_{REV_DIR_ADDR,NOSTART,..} */ +#define I2C_FUNC_SMBUS_PEC 0x00000008 +#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */ +#define I2C_FUNC_SMBUS_QUICK 0x00010000 +#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000 +#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000 +#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000 +#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000 +#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000 +#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000 +#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000 +#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000 +#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000 +#define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */ +#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */ + +#define I2C_FUNC_SMBUS_BYTE (I2C_FUNC_SMBUS_READ_BYTE | \ + I2C_FUNC_SMBUS_WRITE_BYTE) +#define I2C_FUNC_SMBUS_BYTE_DATA (I2C_FUNC_SMBUS_READ_BYTE_DATA | \ + I2C_FUNC_SMBUS_WRITE_BYTE_DATA) +#define I2C_FUNC_SMBUS_WORD_DATA (I2C_FUNC_SMBUS_READ_WORD_DATA | \ + I2C_FUNC_SMBUS_WRITE_WORD_DATA) +#define I2C_FUNC_SMBUS_BLOCK_DATA (I2C_FUNC_SMBUS_READ_BLOCK_DATA | \ + I2C_FUNC_SMBUS_WRITE_BLOCK_DATA) +#define I2C_FUNC_SMBUS_I2C_BLOCK (I2C_FUNC_SMBUS_READ_I2C_BLOCK | \ + I2C_FUNC_SMBUS_WRITE_I2C_BLOCK) + +/* Old name, for compatibility */ +#define I2C_FUNC_SMBUS_HWPEC_CALC I2C_FUNC_SMBUS_PEC + +/* + * Data for SMBus Messages + */ +#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */ +#define I2C_SMBUS_I2C_BLOCK_MAX 32 /* Not specified but we use same structure */ +union i2c_smbus_data { + __u8 byte; + __u16 word; + __u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */ + /* and one more for PEC */ +}; + +#define I2C_SMBUS_BLOCK_LARGE_MAX 240 +union i2c_smbus_large_data { + union i2c_smbus_data data; + __u8 block[I2C_SMBUS_BLOCK_LARGE_MAX + 2]; /* block[0] is used for length */ + /* and one more for PEC */ +}; + +/* smbus_access read or write markers */ +#define I2C_SMBUS_READ 1 +#define I2C_SMBUS_WRITE 0 + +/* SMBus transaction types (size parameter in the above functions) + Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */ +#define I2C_SMBUS_QUICK 0 +#define I2C_SMBUS_BYTE 1 +#define I2C_SMBUS_BYTE_DATA 2 +#define I2C_SMBUS_WORD_DATA 3 +#define I2C_SMBUS_PROC_CALL 4 +#define I2C_SMBUS_BLOCK_DATA 5 +#define I2C_SMBUS_I2C_BLOCK_BROKEN 6 +#define I2C_SMBUS_BLOCK_PROC_CALL 7 /* SMBus 2.0 */ +#define I2C_SMBUS_I2C_BLOCK_DATA 8 +#define I2C_SMBUS_BLOCK_LARGE_DATA 9 + + +/* /dev/i2c-X ioctl commands. The ioctl's parameter is always an + * unsigned long, except for: + * - I2C_FUNCS, takes pointer to an unsigned long + * - I2C_RDWR, takes pointer to struct i2c_rdwr_ioctl_data + * - I2C_SMBUS, takes pointer to struct i2c_smbus_ioctl_data + */ +#define I2C_RETRIES 0x0701 /* number of times a device address should + be polled when not acknowledging */ +#define I2C_TIMEOUT 0x0702 /* set timeout in units of 10 ms */ + +/* NOTE: Slave address is 7 or 10 bits, but 10-bit addresses + * are NOT supported! (due to code brokenness) + */ +#define I2C_SLAVE 0x0703 /* Use this slave address */ +#define I2C_SLAVE_FORCE 0x0706 /* Use this slave address, even if it + is already in use by a driver! */ +#define I2C_TENBIT 0x0704 /* 0 for 7 bit addrs, != 0 for 10 bit */ + +#define I2C_FUNCS 0x0705 /* Get the adapter functionality mask */ + +#define I2C_RDWR 0x0707 /* Combined R/W transfer (one STOP only) */ +#define I2C_SLAVE_RDWR 0x0709 /* Slave Read/Write */ + +#define I2C_PEC 0x0708 /* != 0 to use PEC with SMBus */ +#define I2C_SMBUS 0x0720 /* SMBus transfer */ + + +/* This is the structure as used in the I2C_SMBUS ioctl call */ +struct i2c_smbus_ioctl_data { + __u8 read_write; + __u8 command; + __u32 size; + union i2c_smbus_data *data; +}; + +/* This is the structure as used in the I2C_RDWR ioctl call */ +struct i2c_rdwr_ioctl_data { + struct i2c_msg *msgs; /* pointers to i2c_msgs */ + __u32 nmsgs; /* number of i2c_msgs */ +}; + +#define I2C_RDRW_IOCTL_MAX_MSGS 42 + + +static inline __s32 i2c_smbus_access(int file, char read_write, __u8 command, + int size, union i2c_smbus_data *data) +{ + struct i2c_smbus_ioctl_data args; + + args.read_write = read_write; + args.command = command; + args.size = size; + args.data = data; + return ioctl(file,I2C_SMBUS,&args); +} + + +static inline __s32 i2c_smbus_write_quick(int file, __u8 value) +{ + return i2c_smbus_access(file,value,0,I2C_SMBUS_QUICK,NULL); +} + +static inline __s32 i2c_smbus_read_byte(int file) +{ + union i2c_smbus_data data; + if (i2c_smbus_access(file,I2C_SMBUS_READ,0,I2C_SMBUS_BYTE,&data)) + return -1; + else + return 0x0FF & data.byte; +} + +static inline __s32 i2c_smbus_write_byte(int file, __u8 value) +{ + return i2c_smbus_access(file,I2C_SMBUS_WRITE,value, + I2C_SMBUS_BYTE,NULL); +} + +static inline __s32 i2c_smbus_read_byte_data(int file, __u8 command) +{ + union i2c_smbus_data data; + if (i2c_smbus_access(file,I2C_SMBUS_READ,command, + I2C_SMBUS_BYTE_DATA,&data)) + return -1; + else + return 0x0FF & data.byte; +} + +static inline __s32 i2c_smbus_write_byte_data(int file, __u8 command, + __u8 value) +{ + union i2c_smbus_data data; + data.byte = value; + return i2c_smbus_access(file,I2C_SMBUS_WRITE,command, + I2C_SMBUS_BYTE_DATA, &data); +} + +static inline __s32 i2c_smbus_read_word_data(int file, __u8 command) +{ + union i2c_smbus_data data; + if (i2c_smbus_access(file,I2C_SMBUS_READ,command, + I2C_SMBUS_WORD_DATA,&data)) + return -1; + else + return 0x0FFFF & data.word; +} + +static inline __s32 i2c_smbus_write_word_data(int file, __u8 command, + __u16 value) +{ + union i2c_smbus_data data; + data.word = value; + return i2c_smbus_access(file,I2C_SMBUS_WRITE,command, + I2C_SMBUS_WORD_DATA, &data); +} + +static inline __s32 i2c_smbus_process_call(int file, __u8 command, __u16 value) +{ + union i2c_smbus_data data; + data.word = value; + if (i2c_smbus_access(file,I2C_SMBUS_WRITE,command, + I2C_SMBUS_PROC_CALL,&data)) + return -1; + else + return 0x0FFFF & data.word; +} + + +/* Returns the number of read bytes */ +static inline __s32 i2c_smbus_read_block_data(int file, __u8 command, + __u8 *values) +{ + union i2c_smbus_data data; + if (i2c_smbus_access(file,I2C_SMBUS_READ,command, + I2C_SMBUS_BLOCK_DATA,&data)) + return -1; + else { + memcpy(values, &data.block[1], _I2C_MIN(data.block[0], I2C_SMBUS_BLOCK_MAX)); + return data.block[0]; + } +} + +static inline __s32 i2c_smbus_write_block_data(int file, __u8 command, + __u8 length, const __u8 *values) +{ + union i2c_smbus_data data; + if (length > 32) + length = 32; + memcpy(&data.block[1], values, length); + data.block[0] = length; + return i2c_smbus_access(file,I2C_SMBUS_WRITE,command, + I2C_SMBUS_BLOCK_DATA, &data); +} + +static inline __s32 i2c_smbus_read_block_large_data(int file, __u8 command, + __u8 *values) +{ + union i2c_smbus_large_data data; + if (i2c_smbus_access(file, I2C_SMBUS_READ, command, + I2C_SMBUS_BLOCK_LARGE_DATA, + (union i2c_smbus_data *)&data)) { + return -1; + } else { + /* the first byte is the length which is not copied */ + memcpy(values, &data.block[1], _I2C_MIN(data.block[0], I2C_SMBUS_BLOCK_LARGE_MAX)); + return data.block[0]; + } +} + +static inline __s32 i2c_smbus_write_block_large_data(int file, __u8 command, + __u8 length, + const __u8 *values) +{ + union i2c_smbus_large_data data; + if (length > I2C_SMBUS_BLOCK_LARGE_MAX) { + length = I2C_SMBUS_BLOCK_LARGE_MAX; + } + data.block[0] = length; + memcpy(&data.block[1], values, length); + return i2c_smbus_access(file, I2C_SMBUS_WRITE, command, + I2C_SMBUS_BLOCK_LARGE_DATA, + (union i2c_smbus_data *)&data); +} + +/* Returns the number of read bytes */ +/* Until kernel 2.6.22, the length is hardcoded to 32 bytes. If you + ask for less than 32 bytes, your code will only work with kernels + 2.6.23 and later. */ +static inline __s32 i2c_smbus_read_i2c_block_data(int file, __u8 command, + __u8 length, __u8 *values) +{ + union i2c_smbus_data data; + + if (length > 32) + length = 32; + data.block[0] = length; + if (i2c_smbus_access(file,I2C_SMBUS_READ,command, + length == 32 ? I2C_SMBUS_I2C_BLOCK_BROKEN : + I2C_SMBUS_I2C_BLOCK_DATA,&data)) + return -1; + else { + memcpy(values, &data.block[1], _I2C_MIN(data.block[0], I2C_SMBUS_BLOCK_MAX)); + return data.block[0]; + } +} + +static inline __s32 i2c_smbus_write_i2c_block_data(int file, __u8 command, + __u8 length, + const __u8 *values) +{ + union i2c_smbus_data data; + if (length > 32) + length = 32; + memcpy(&data.block[1], values, length); + data.block[0] = length; + return i2c_smbus_access(file,I2C_SMBUS_WRITE,command, + I2C_SMBUS_I2C_BLOCK_BROKEN, &data); +} + +/* Returns the number of read bytes */ +static inline __s32 i2c_smbus_block_process_call(int file, __u8 command, + __u8 length, __u8 *values) +{ + union i2c_smbus_data data; + if (length > 32) + length = 32; + memcpy(&data.block[1], values, length); + data.block[0] = length; + if (i2c_smbus_access(file,I2C_SMBUS_WRITE,command, + I2C_SMBUS_BLOCK_PROC_CALL,&data)) + return -1; + else { + memcpy(values, &data.block[1], _I2C_MIN(data.block[0], I2C_SMBUS_BLOCK_MAX)); + return data.block[0]; + } +} + +#undef _I2C_MIN + +#endif /* _LINUX_I2C_DEV_H */ diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/src/include/log.h b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/src/include/log.h new file mode 100644 index 0000000..a69d69e --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/src/include/log.h @@ -0,0 +1,59 @@ +/* + * Copyright 2014-present Facebook. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef LOG_H +#define LOG_H + +#include <stdio.h> +#include <string.h> + +//#define DEBUG +//#define VERBOSE + +#define _LOG(dst, fmt, ...) do { \ + fprintf(dst, "%s:%d " fmt "\n", \ + __FUNCTION__, __LINE__, ##__VA_ARGS__); \ + fflush(dst); \ +} while(0) + +#define LOG_ERR(err, fmt, ...) do { \ + char buf[128]; \ + strerror_r(err, buf, sizeof(buf)); \ + _LOG(stderr, "ERROR " fmt ": %s", ##__VA_ARGS__, buf); \ +} while(0) + +#define LOG_INFO(fmt, ...) do { \ + _LOG(stdout, fmt, ##__VA_ARGS__); \ +} while(0) + +#ifdef DEBUG +#define LOG_DBG(fmt, ...) do { \ + _LOG(stdout, fmt, ##__VA_ARGS__); \ +} while(0) +#else +#define LOG_DBG(fmt, ...) +#endif + +#ifdef VERBOSE +#define LOG_VER(fmt, ...) do { \ + _LOG(stdout, fmt, ##__VA_ARGS__); \ +} while(0) +#else +#define LOG_VER(fmt, ...) +#endif + +#endif diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/us_console.sh b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/us_console.sh new file mode 100755 index 0000000..1672acd --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/us_console.sh @@ -0,0 +1,41 @@ +#!/bin/sh +# +# Copyright 2014-present Facebook. All Rights Reserved. +# +# This program file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program in a file named COPYING; if not, write to the +# Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301 USA +# + +usage() { + echo "$0 <connect | disconnect>" +} + +. /usr/local/fbpackages/utils/ast-functions + +if [ $# -ne 1 ]; then + usage + exit 1 +fi + +if [ "$1" == "connect" ]; then + VALUE=1 +elif [ "$1" == "disconnect" ]; then + VALUE=0 +else + usage + exit 1 +fi + +gpio_set 32 $VALUE diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/watch-fc.sh b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/watch-fc.sh new file mode 100755 index 0000000..d04b7cd --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/watch-fc.sh @@ -0,0 +1,34 @@ +#!/bin/bash +# +# Copyright 2014-present Facebook. All Rights Reserved. +# +# This program file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program in a file named COPYING; if not, write to the +# Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301 USA +# + +. /usr/local/fbpackages/utils/ast-functions + +MAC1LINK=0 # GPIOA0 +FAB0_PRES=20 # GPIOC4 +FAB1_PRES=21 # GPIOC5 +while true; do + # fabN_pres: active low. + if [ $(gpio_get $FAB0_PRES) = 0 ]; then + gpio_set $MAC1LINK 0 + elif [ $(gpio_get $FAB1_PRES) = 0 ]; then + gpio_set $MAC1LINK 1 + fi + sleep 1 +done diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/wedge_us_mac.sh b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/wedge_us_mac.sh new file mode 100644 index 0000000..34b8e59 --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/wedge_us_mac.sh @@ -0,0 +1,29 @@ +#!/bin/bash +# +# Copyright 2014-present Facebook. All Rights Reserved. +# +# This program file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program in a file named COPYING; if not, write to the +# Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301 USA +# + +PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin + +mac=$(i2cdump -y 0x0 0x49 s 0xd4 | grep '^00: d4'| awk '{ print $3":"$4":"$5":"$6":"$7":"$8 }') 2>/dev/null + +if [ -n "$mac" ]; then + echo $mac +else + echo "Cannot find out the microserver MAC" 1>&2 +fi diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/yosemite-sensors/Makefile b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/yosemite-sensors/Makefile new file mode 100644 index 0000000..2bc9721 --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/yosemite-sensors/Makefile @@ -0,0 +1,10 @@ +# Copyright 2015-present Facebook. All Rights Reserved. +all: yosemite-sensors + +yosemite-sensors: yosemite-sensors.c + $(CC) -lyosemite_sensor -std=c99 -o $@ $^ $(LDFLAGS) + +.PHONY: clean + +clean: + rm -rf *.o yosemite-sensors diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/yosemite-sensors/yosemite-sensors.c b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/yosemite-sensors/yosemite-sensors.c new file mode 100644 index 0000000..aa921db --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/yosemite-sensors/yosemite-sensors.c @@ -0,0 +1,405 @@ +/* + * yosemite-sensors + * + * Copyright 2015-present Facebook. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <errno.h> +#include <syslog.h> +#include <stdint.h> +#include <pthread.h> +#include <facebook/bic.h> +#include <openbmc/ipmi.h> +#include <facebook/yosemite_sensor.h> + +int +main(int argc, char **argv) { + int value; + float fvalue; + uint8_t slot_id; + + slot_id = atoi(argv[1]); + + if (yosemite_sensor_read(slot_id, SP_SENSOR_INLET_TEMP, &fvalue)) { + printf("yosemite_sensor_read failed: SP_SENSOR_INLET_TEMP\n"); + } else { + printf("SP_SENSOR_INLET_TEMP: %.2f C\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, SP_SENSOR_OUTLET_TEMP, &fvalue)) { + printf("yosemite_sensor_read failed: SP_SENSOR_OUTLET_TEMP\n"); + } else { + printf("SP_SENSOR_OUTLET_TEMP: %.2f C\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, SP_SENSOR_FAN0_TACH, &value)) { + printf("yosemite_sensor_read failed: SP_SENSOR_FAN0_TACH\n"); + } else { + printf("SP_SENSOR_FAN0_TACH: %d rpm\n", value); + } + + if (yosemite_sensor_read(slot_id, SP_SENSOR_FAN1_TACH, &value)) { + printf("yosemite_sensor_read failed: SP_SENSOR_FAN1_TACH\n"); + } else { + printf("SP_SENSOR_FAN1_TACH: %d rpm\n", value); + } + + if (yosemite_sensor_read(slot_id, SP_SENSOR_P5V, &fvalue)) { + printf("yosemite_sensor_read failed: SP_SENSOR_P5V\n"); + } else { + printf("SP_SENSOR_P5V: %.2f Volts\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, SP_SENSOR_P12V, &fvalue)) { + printf("yosemite_sensor_read failed: SP_SENSOR_P12V\n"); + } else { + printf("SP_SENSOR_P12V: %.2f Volts\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, SP_SENSOR_P3V3_STBY, &fvalue)) { + printf("yosemite_sensor_read failed: SP_SENSOR_P3V3_STBY\n"); + } else { + printf("SP_SENSOR_P3V3_STBY: %.2f Volts\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, SP_SENSOR_P12V_SLOT0, &fvalue)) { + printf("yosemite_sensor_read failed: SP_SENSOR_P12V_SLOT0\n"); + } else { + printf("SP_SENSOR_P12V_SLOT0: %.2f Volts\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, SP_SENSOR_P12V_SLOT1, &fvalue)) { + printf("yosemite_sensor_read failed: SP_SENSOR_P12V_SLOT1\n"); + } else { + printf("SP_SENSOR_P12V_SLOT1: %.2f Volts\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, SP_SENSOR_P12V_SLOT2, &fvalue)) { + printf("yosemite_sensor_read failed: SP_SENSOR_P12V_SLOT2\n"); + } else { + printf("SP_SENSOR_P12V_SLOT2: %.2f Volts\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, SP_SENSOR_P12V_SLOT3, &fvalue)) { + printf("yosemite_sensor_read failed: SP_SENSOR_P12V_SLOT3\n"); + } else { + printf("SP_SENSOR_P12V_SLOT3: %.2f Volts\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, SP_SENSOR_P3V3, &fvalue)) { + printf("yosemite_sensor_read failed: SP_SENSOR_P3V3\n"); + } else { + printf("SP_SENSOR_P3V3: %.2f Volts\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, SP_SENSOR_HSC_IN_VOLT, &fvalue)) { + printf("yosemite_sensor_read failed: SP_SENSOR_HSC_IN_VOLT\n"); + } else { + printf("SP_SENSOR_HSC_IN_VOLT: %.2f Volts\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, SP_SENSOR_HSC_OUT_CURR, &fvalue)) { + printf("yosemite_sensor_read failed: SP_SENSOR_HSC_OUT_CURR\n"); + } else { + printf("SP_SENSOR_HSC_OUT_CURR: %.2f Amps\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, SP_SENSOR_HSC_TEMP, &fvalue)) { + printf("yosemite_sensor_read failed: SP_SENSOR_HSC_TEMP\n"); + } else { + printf("SP_SENSOR_P3V3: %.2f C\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, SP_SENSOR_HSC_IN_POWER, &fvalue)) { + printf("yosemite_sensor_read failed: SP_SENSOR_HSC_IN_POWER\n"); + } else { + printf("SP_SENSOR_HSC_IN_POWER: %.2f Watts\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_MB_OUTLET_TEMP, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_MB_OUTLET_TEMP\n"); + } else { + printf("BIC_SENSOR_MB_OUTLET_TEMP: %.2f C\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_VCCIN_VR_TEMP, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_VCCIN_VR_TEMP\n"); + } else { + printf("BIC_SENSOR_VCCIN_VR_TEMP: %.2f C\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_VCC_GBE_VR_TEMP, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_VCC_GBE_VR_TEMP\n"); + } else { + printf("BIC_SENSOR_VCC_GBE_VR_TEMP: %.2f C\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_1V05PCH_VR_TEMP, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_1V05PCH_VR_TEMP\n"); + } else { + printf("BIC_SENSOR_1V05PCH_VR_TEMP: %.2f C\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_SOC_TEMP, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_SOC_TEMP\n"); + } else { + printf("BIC_SENSOR_SOC_TEMP: %.2f C\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_MB_INLET_TEMP, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_MB_INLET_TEMP\n"); + } else { + printf("BIC_SENSOR_MB_INLET_TEMP: %.2f C\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_PCH_TEMP, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_PCH_TEMP\n"); + } else { + printf("BIC_SENSOR_PCH_TEMP: %.2f C\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_SOC_THERM_MARGIN, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_SOC_THERM_MARGIN\n"); + } else { + printf("BIC_SENSOR_SOC_THERM_MARGIN: %.2f C\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_VDDR_VR_TEMP, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_VDDR_VR_TEMP\n"); + } else { + printf("BIC_SENSOR_VDDR_VR_TEMP: %.2f C\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_SOC_TJMAX, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_SOC_TJMAX\n"); + } else { + printf("BIC_SENSOR_SOC_TJMAX: %.2f C\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_VCC_SCSUS_VR_TEMP, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_VCC_SCSUS_VR_TEMP\n"); + } else { + printf("BIC_SENSOR_VCC_SCSUS_VR_TEMP: %.2f C\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_SOC_DIMMA0_TEMP, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_SOC_DIMMA0_TEMP\n"); + } else { + printf("BIC_SENSOR_SOC_DIMMA0_TEMP: %.2f C\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_SOC_DIMMA1_TEMP, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_SOC_DIMMA1_TEMP\n"); + } else { + printf("BIC_SENSOR_SOC_DIMMA1_TEMP: %.2f C\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_SOC_DIMMB0_TEMP, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_SOC_DIMMB0_TEMP\n"); + } else { + printf("BIC_SENSOR_SOC_DIMMB0_TEMP: %.2f C\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_SOC_DIMMB1_TEMP, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_SOC_DIMMB1_TEMP\n"); + } else { + printf("BIC_SENSOR_SOC_DIMMB1_TEMP: %.2f C\n", fvalue); + } + + // Monolake Current Sensors + if (yosemite_sensor_read(slot_id, BIC_SENSOR_VCC_GBE_VR_CURR, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_VCC_GBE_VR_CURR\n"); + } else { + printf("BIC_SENSOR_VCC_GBE_VR_CURR: %.2f Amps\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_1V05_PCH_VR_CURR, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_1V05_PCH_VR_CURR\n"); + } else { + printf("BIC_SENSOR_1V05_PCH_VR_CURR: %.2f Amps\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_VCCIN_VR_CURR, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_VCCIN_VR_CURR\n"); + } else { + printf("BIC_SENSOR_VCCIN_VR_CURR: %.2f Amps\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_VDDR_VR_CURR, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_VDDR_VR_CURR\n"); + } else { + printf("BIC_SENSOR_VDDR_VR_CURR: %.2f Amps\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_VCC_SCSUS_VR_CURR, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_VCC_SCSUS_VR_CURR\n"); + } else { + printf("BIC_SENSOR_VCC_SCSUS_VR_CURR: %.2f Amps\n", fvalue); + } + + // Monolake Voltage Sensors + if (yosemite_sensor_read(slot_id, BIC_SENSOR_VCCIN_VR_VOL, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_VCCIN_VR_VOL\n"); + } else { + printf("BIC_SENSOR_VCCIN_VR_VOL: %.2f Volts\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_VDDR_VR_VOL, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_VDDR_VR_VOL\n"); + } else { + printf("BIC_SENSOR_VDDR_VR_VOL: %.2f Volts\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_VCC_SCSUS_VR_VOL, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_VCC_SCSUS_VR_VOL\n"); + } else { + printf("BIC_SENSOR_VCC_SCSUS_VR_VOL: %.2f Volts\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_VCC_GBE_VR_VOL, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_VCC_GBE_VR_VOL\n"); + } else { + printf("BIC_SENSOR_VCC_GBE_VR_VOL: %.2f Volts\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_1V05_PCH_VR_VOL, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_1V05_PCH_VR_VOL\n"); + } else { + printf("BIC_SENSOR_1V05_PCH_VR_VOL: %.2f Volts\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_P3V3_MB, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_P3V3_MB\n"); + } else { + printf("BIC_SENSOR_P3V3_MB: %.2f Volts\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_P12V_MB, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_P12V_MB\n"); + } else { + printf("BIC_SENSOR_P12V_MB: %.2f Volts\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_P1V05_PCH, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_P1V05_PCH\n"); + } else { + printf("BIC_SENSOR_P1V05_PCH: %.2f Volts\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_P3V3_STBY_MB, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_P3V3_STBY_MB\n"); + } else { + printf("BIC_SENSOR_P3V3_STBY_MB: %.2f Volts\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_P5V_STBY_MB, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_P5V_STBY_MB\n"); + } else { + printf("BIC_SENSOR_P5V_STBY_MB: %.2f Volts\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_PV_BAT, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_PV_BAT\n"); + } else { + printf("BIC_SENSOR_PV_BAT: %.2f Volts\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_PVDDR, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_PVDDR\n"); + } else { + printf("BIC_SENSOR_PVDDR: %.2f Volts\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_PVCC_GBE, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_PVCC_GBE\n"); + } else { + printf("BIC_SENSOR_PVCC_GBE: %.2f Volts\n", fvalue); + } + + // Monolake Power Sensors + if (yosemite_sensor_read(slot_id, BIC_SENSOR_VCCIN_VR_POUT, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_VCCIN_VR_POUT\n"); + } else { + printf("BIC_SENSOR_VCCIN_VR_POUT: %.2f Watts\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_INA230_POWER, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_INA230_POWER\n"); + } else { + printf("BIC_SENSOR_INA230_POWER: %.2f Watts\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_SOC_PACKAGE_PWR, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_SOC_PACKAGE_PWR\n"); + } else { + printf("BIC_SENSOR_SOC_PACKAGE_PWR: %.2f Watts\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_VDDR_VR_POUT, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_VDDR_VR_POUT\n"); + } else { + printf("BIC_SENSOR_VDDR_VR_POUT: %.2f Watts\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_VCC_SCSUS_VR_POUT, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_VCC_SCSUS_VR_POUT\n"); + } else { + printf("BIC_SENSOR_VCC_SCSUS_VR_POUT: %.2f Watts\n", fvalue); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_VCC_GBE_VR_POUT, &fvalue)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_VCC_GBE_VR_POUT\n"); + } else { + printf("BIC_SENSOR_VCC_GBE_VR_POUT: %.2f Watts\n", fvalue); + } + + // Discrete Sensors + if (yosemite_sensor_read(slot_id, BIC_SENSOR_SYSTEM_STATUS, &value)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_SYSTEM_STATUS\n"); + } else { + printf("BIC_SENSOR_SYSTEM_STATUS: 0x%X\n", value); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_PROC_FAIL, &value)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_PROC_FAIL\n"); + } else { + printf("BIC_SENSOR_PROC_FAIL: 0x%X\n", value); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_SYS_BOOT_STAT, &value)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_SYS_BOOT_STAT\n"); + } else { + printf("BIC_SENSOR_SYS_BOOT_STAT: 0x%X\n", value); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_VR_HOT, &value)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_VR_HOT\n"); + } else { + printf("BIC_SENSOR_VR_HOT: 0x%X\n", value); + } + + if (yosemite_sensor_read(slot_id, BIC_SENSOR_CPU_DIMM_HOT, &value)) { + printf("yosemite_sensor_read failed: BIC_SENSOR_CPU_DIMM_HOT\n"); + } else { + printf("BIC_SENSOR_CPU_DIMM_HOT: 0x%X\n", value); + } + + return 0; +} diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/yosemite_power.sh b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/yosemite_power.sh new file mode 100644 index 0000000..3a2aaf7 --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/files/yosemite_power.sh @@ -0,0 +1,169 @@ +#!/bin/bash +# +# Copyright 2015-present Facebook. All Rights Reserved. +# +# This program file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program in a file named COPYING; if not, write to the +# Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301 USA +# + +. /usr/local/fbpackages/utils/ast-functions + +PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin + +LPS_PATH=/mnt/data/power/por/last_state + +prog="$0" + +usage() { + echo "Usage: $prog <slot#> <command> [command options]" + echo + echo "Commands:" + echo " status: Get the current 1S server power status" + echo + echo " on: Power on 1S server if not powered on already" + echo " options:" + echo " -f: Re-do power on sequence no matter if 1S server has " + echo " been powered on or not." + echo + echo " off: Power off 1S server ungracefully" + echo + echo +} + +do_status() { + if [ $(is_server_prsnt $slot) == "0" ]; then + echo "The given slot is Empty" + return 0 + fi + + echo -n "1S Server power for slot#$slot is " + if [ $(yosemite_is_server_on $slot) -eq 1 ] ; then + echo "on" + else + echo "off" + fi + return 0 +} + +do_on() { + + if [ $(is_server_prsnt $slot) == "0" ]; then + echo "The given slot is Empty" + return 0 + fi + + local force opt + force=0 + while getopts "f" opt; do + case $opt in + f) + force=1 + ;; + *) + usage + exit -1 + ;; + + esac + done + echo -n "Power on slot#$slot server ..." + if [ $force -eq 0 ]; then + # need to check if 1S Server is on or not + if [ $(yosemite_is_server_on $slot) -eq 1 ]; then + echo " Already on. Skip!" + return 1 + fi + fi + + # TODO: State the power state change + echo "on $(date +%s)" > $LPS_PATH + + # first make sure, GPIO is high + gpio_set $gpio 1 + # generate the power on pulse + gpio_set $gpio 0 + sleep 1 + gpio_set $gpio 1 + sleep 1 + # Turn on the power LED + /usr/local/bin/power_led.sh $slot on + echo " Done" + return 0 +} + +do_off() { + if [ $(is_server_prsnt $slot) == "0" ]; then + echo "The given slot is Empty" + return 0 + fi + echo -n "Power off slot#$slot server ..." + + #TODO: State the power state change + echo "off $(date +%s)" > $LPS_PATH + + # first make sure, GPIO is high + gpio_set $gpio 1 + sleep 1 + gpio_set $gpio 0 + sleep 5 + gpio_set $gpio 1 + # Turn off the power LED + /usr/local/bin/power_led.sh $slot off + echo " Done" + return 0 +} + +# Slot1: GPIOD3(27), Slot2: GPIOD1(25), Slot3: GPIOD7(31), Slot4: GPIOD5(29) +slot=$1 + +case $slot in + 1) + gpio=D3 + ;; + 2) + gpio=D1 + ;; + 3) + gpio=D7 + ;; + 4) + gpio=D5 + ;; + *) + gpio=D3 + ;; +esac + +command="$2" +shift +shift + +case "$command" in + status) + do_status $@ + ;; + on) + do_on $@ + ;; + off) + do_off $@ + ;; + *) + usage + exit -1 + ;; +esac + +exit $? diff --git a/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/yosemite-sensors_0.1.bb b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/yosemite-sensors_0.1.bb new file mode 100644 index 0000000..245f05d --- /dev/null +++ b/meta-facebook/meta-yosemite/recipes-yosemite/fbutils/yosemite-sensors_0.1.bb @@ -0,0 +1,21 @@ +# Copyright 2015-present Facebook. All Rights Reserved. +SUMMARY = "Yosemite Sensor Utility" +DESCRIPTION = "Util for reading various sensors on Yosemite" +SECTION = "base" +PR = "r1" +LICENSE = "GPLv2" +LIC_FILES_CHKSUM = "file://yosemite-sensors.c;beginline=4;endline=16;md5=b395943ba8a0717a83e62ca123a8d238" + +SRC_URI = "file://yosemite-sensors \ + " + +S = "${WORKDIR}/yosemite-sensors" + +do_install() { + install -d ${D}${bindir} + install -m 0755 yosemite-sensors ${D}${bindir}/yosemite-sensors +} + +DEPENDS += "libyosemite-sensor" + +FILES_${PN} = "${bindir}" |
