1 files changed, 72 insertions, 0 deletions
diff --git a/meta-facebook/meta-wedge/recipes-wedge/fbutils/files/power-on.sh b/meta-facebook/meta-wedge/recipes-wedge/fbutils/files/power-on.sh
new file mode 100644
index 0000000..843b79a
--- /dev/null
+++ b/meta-facebook/meta-wedge/recipes-wedge/fbutils/files/power-on.sh
@@ -0,0 +1,72 @@
+#!/bin/sh
+#
+# Copyright 2014-present Facebook. All Rights Reserved.
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program in a file named COPYING; if not, write to the
+# Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301 USA
+
+### BEGIN INIT INFO
+# Provides:          power-on
+# Required-Start:
+# Required-Stop:
+# Default-Start:     S
+# Default-Stop:
+# Short-Description: Power on micro-server
+### END INIT INFO
+. /usr/local/fbpackages/utils/ast-functions
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin
+
+echo -n "Checking microserver power status ... "
+if wedge_is_us_on 10 "."; then
+    echo "on"
+    on=1
+else
+    echo "off"
+    on=0
+fi
+
+if [ $on -eq 0 ]; then
+    # Reset USB hub
+    /usr/local/bin/reset_usb.sh
+    # Set up ROV
+    /usr/local/bin/setup_rov.sh
+    # Configure the management switch on LEFT side of FC.
+    # Must do so after setup_rov.sh, as setup_rov.sh might reset
+    # T2, which also resets the switch.
+    if [ "$(wedge_board_type)" = "FC-LEFT" ]; then
+        echo -n "Configure management switch ... "
+        if [ $(wedge_board_rev) -gt 1 ]; then
+            echo "skip. Need new switch setup script!!!"
+        else
+            # configure MDIO as GPIO output
+            gpio_set A6 1
+            gpio_set A7 1
+            # set the switch to be configured by CPU
+            gpio_set E2 1
+            # set the switch to be configured by CPU, then reset the switch,
+            # which also cause T2 reset in the current board
+            gpio_set E2 1
+            gpio_set C0 0
+            sleep 1
+            gpio_set C0 1
+            # configure the switch
+            setup_switch.py
+            echo "done"
+        fi
+    fi
+    # Power on now
+    wedge_power.sh on -f
+fi