diff options
Diffstat (limited to 'include/configs/socfpga_cyclone5.h')
| -rw-r--r-- | include/configs/socfpga_cyclone5.h | 236 |
1 files changed, 236 insertions, 0 deletions
diff --git a/include/configs/socfpga_cyclone5.h b/include/configs/socfpga_cyclone5.h new file mode 100644 index 0000000..5633d2a --- /dev/null +++ b/include/configs/socfpga_cyclone5.h @@ -0,0 +1,236 @@ +/* + * Copyright (C) 2012 Altera Corporation <www.altera.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/socfpga_base_addrs.h> + +/* + * High level configuration + */ + +#define CONFIG_ARMV7 +#define CONFIG_L2_OFF +#define CONFIG_SYS_DCACHE_OFF +#undef CONFIG_USE_IRQ + +#define CONFIG_MISC_INIT_R +#define CONFIG_SINGLE_BOOTLOADER +#define CONFIG_SOCFPGA + +#define CONFIG_SYS_TEXT_BASE 0x08000040 +#define V_NS16550_CLK 1000000 +#define CONFIG_BAUDRATE 57600 +#define CONFIG_SYS_HZ 1000 +#define CONFIG_TIMER_CLOCK_KHZ 2400 +#define CONFIG_SYS_LOAD_ADDR 0x7fc0 + +/* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 +/* Monitor Command Prompt */ +#define CONFIG_SYS_PROMPT "SOCFPGA_CYCLONE5 # " +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* + * Display CPU and Board Info + */ +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* + * Enable early stage initialization at C environment + */ +#define CONFIG_BOARD_EARLY_INIT_F + +/* flat device tree */ +#define CONFIG_OF_LIBFDT +/* skip updating the FDT blob */ +#define CONFIG_FDT_BLOB_SKIP_UPDATE +/* Initial Memory map size for Linux, minus 4k alignment for DFT blob */ +#define CONFIG_SYS_BOOTMAPSZ ((256*1024*1024) - (4*1024)) + +#define CONFIG_SPL_RAM_DEVICE +#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR +#define CONFIG_SYS_SPL_MALLOC_START ((unsigned long) (&__malloc_start)) +#define CONFIG_SYS_SPL_MALLOC_SIZE (&__malloc_end - &__malloc_start) + +/* + * Memory allocation (MALLOC) + */ +/* Room required on the stack for the environment data */ +#define CONFIG_ENV_SIZE 1024 +/* Size of DRAM reserved for malloc() use */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) + +/* SP location before relocation, must use scratch RAM */ +#define CONFIG_SYS_INIT_RAM_ADDR 0xFFFF0000 +/* Reserving 0x100 space at back of scratch RAM for debug info */ +#define CONFIG_SYS_INIT_RAM_SIZE (0x10000 - 0x100) +/* Stack pointer prior relocation, must situated at on-chip RAM */ +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) + + +/* + * Command line configuration. + */ +#define CONFIG_SYS_NO_FLASH +#include <config_cmd_default.h> +/* FAT file system support */ +#define CONFIG_CMD_FAT + + +/* + * Misc + */ +#define CONFIG_DOS_PARTITION 1 + +#ifdef CONFIG_SPL_BUILD +#undef CONFIG_PARTITIONS +#endif + +/* + * Environment setup + */ + +/* Delay before automatically booting the default image */ +#define CONFIG_BOOTDELAY 3 +/* Enable auto completion of commands using TAB */ +#define CONFIG_AUTO_COMPLETE +/* use "hush" command parser */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMD_RUN + +#define CONFIG_BOOTCOMMAND "run ramboot" + +/* + * arguments passed to the bootm command. The value of + * CONFIG_BOOTARGS goes into the environment value "bootargs". + * Do note the value will overide also the chosen node in FDT blob. + */ +#define CONFIG_BOOTARGS "console=ttyS0,57600,mem=256M@0x0" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "verify=n\0" \ + "loadaddr= " __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ + "ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \ + "bootm ${loadaddr} - ${fdt_addr}\0" \ + "bootimage=uImage\0" \ + "fdt_addr=100\0" \ + "fsloadcmd=ext2load\0" \ + "bootm ${loadaddr} - ${fdt_addr}\0" \ + "qspiroot=/dev/mtdblock0\0" \ + "qspirootfstype=jffs2\0" \ + "qspiboot=setenv bootargs " CONFIG_BOOTARGS \ + " root=${qspiroot} rw rootfstype=${qspirootfstype};"\ + "bootm ${loadaddr} - ${fdt_addr}\0" + +/* using environment setting for stdin, stdout, stderr */ +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +/* Enable the call to overwrite_console() */ +#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE +/* Enable overwrite of previous console environment settings */ +#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE + +/* max number of command args */ +#define CONFIG_SYS_MAXARGS 16 + + +/* + * Hardware drivers + */ + +/* + * SDRAM Memory Map + */ +/* We have 1 bank of DRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +/* SDRAM Bank #1 */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +/* SDRAM memory size */ +#define PHYS_SDRAM_1_SIZE 0x80000000 + +#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_START 0x00000000 +#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1_SIZE + +/* + * NS16550 Configuration + */ +#define UART0_BASE SOCFPGA_UART0_ADDRESS +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE -4 +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550_COM1 UART0_BASE + +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, 115200} + +/* + * FLASH + */ +#define CONFIG_SYS_NO_FLASH + +/* + * L4 OSC1 Timer 0 + */ +/* This timer use eosc1 where the clock frequency is fixed + * throughout any condition */ +#define CONFIG_SYS_TIMERBASE SOCFPGA_OSC1TIMER0_ADDRESS + +/* reload value when timer count to zero */ +#define TIMER_LOAD_VAL 0xFFFFFFFF + +#define CONFIG_ENV_IS_NOWHERE + +/* + * SPL "Second Program Loader" aka Initial Software + */ + +/* Enable building of SPL globally */ +#define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK + +/* TEXT_BASE for linking the SPL binary */ +#define CONFIG_SPL_TEXT_BASE 0xFFFF0000 + +/* Stack size for SPL */ +#define CONFIG_SPL_STACK_SIZE (4 * 1024) + +/* MALLOC size for SPL */ +#define CONFIG_SPL_MALLOC_SIZE (5 * 1024) + +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_BOARD_INIT + +#define CHUNKSZ_CRC32 (1 * 1024) + +#define CONFIG_CRC32_VERIFY + +/* Linker script for SPL */ +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/socfpga/u-boot-spl.lds" + +/* Support for common/libcommon.o in SPL binary */ +#define CONFIG_SPL_LIBCOMMON_SUPPORT +/* Support for lib/libgeneric.o in SPL binary */ +#define CONFIG_SPL_LIBGENERIC_SUPPORT + +#endif /* __CONFIG_H */ |
