diff options
Diffstat (limited to 'include/configs/km/km_arm.h')
| -rw-r--r-- | include/configs/km/km_arm.h | 328 |
1 files changed, 328 insertions, 0 deletions
diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h new file mode 100644 index 0000000..766d76e --- /dev/null +++ b/include/configs/km/km_arm.h @@ -0,0 +1,328 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Prafulla Wadaskar <prafulla@marvell.com> + * + * (C) Copyright 2009 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * (C) Copyright 2010-2011 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* + * for linking errors see + * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html + */ + +#ifndef _CONFIG_KM_ARM_H +#define _CONFIG_KM_ARM_H + +/* We got removed from Linux mach-types.h */ +#define MACH_TYPE_KM_KIRKWOOD 2255 + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_MARVELL +#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ +#define CONFIG_KIRKWOOD /* SOC Family Name */ +#define CONFIG_KW88F6281 /* SOC Name */ +#define CONFIG_MACH_KM_KIRKWOOD /* Machine type */ + +#define CONFIG_MACH_TYPE MACH_TYPE_KM_KIRKWOOD + +#define CONFIG_NAND_ECC_BCH +#define CONFIG_BCH + +/* include common defines/options for all Keymile boards */ +#include "keymile-common.h" + +#define CONFIG_CMD_NAND +#define CONFIG_CMD_SF +#define CONFIG_SOFT_I2C /* I2C bit-banged */ + +/* SPI NOR Flash default params, used by sf commands */ +#define CONFIG_SF_DEFAULT_SPEED 8100000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 + +#if defined CONFIG_KM_ENV_IS_IN_SPI_NOR +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 8100000 +#define CONFIG_ENV_SPI_MODE SPI_MODE_3 +#endif + +#include "asm/arch/config.h" + +#define CONFIG_SYS_TEXT_BASE 0x07d00000 /* code address before reloc */ +#define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */ +#define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */ +#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ + +/* pseudo-non volatile RAM [hex] */ +#define CONFIG_KM_PNVRAM 0x80000 +/* physical RAM MTD size [hex] */ +#define CONFIG_KM_PHRAM 0x17F000 + +#define CONFIG_KM_CRAMFS_ADDR 0x2400000 +#define CONFIG_KM_KERNEL_ADDR 0x2000000 /* 4096KBytes */ + +/* architecture specific default bootargs */ +#define CONFIG_KM_DEF_BOOT_ARGS_CPU \ + "bootcountaddr=${bootcountaddr} ${mtdparts}" \ + " boardid=0x${IVM_BoardId} hwkey=0x${IVM_HWKey}" + +#define CONFIG_KM_DEF_ENV_CPU \ + "boot=bootm ${load_addr_r} - -\0" \ + "cramfsloadfdt=true\0" \ + "u-boot="__stringify(CONFIG_HOSTNAME) "/u-boot.kwb\0" \ + CONFIG_KM_UPDATE_UBOOT \ + "" + +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ +#define CONFIG_MISC_INIT_R + +/* + * NS16550 Configuration + */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK +#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE +#define CONFIG_SYS_NS16550_COM2 KW_UART1_BASE + +/* + * Serial Port configuration + * The following definitions let you select what serial you want to use + * for your console driver. + */ + +#define CONFIG_CONS_INDEX 1 /* Console on UART0 */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_BOOTMAPSZ (8 << 20) /* Initial Memmap for Linux */ +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_INITRD_TAG /* enable INITRD tag */ +#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ + +/* + * Commands configuration + */ +#define CONFIG_CMD_ELF +#define CONFIG_CMD_MTDPARTS +#define CONFIG_CMD_NFS + +/* + * Without NOR FLASH we need this + */ +#define CONFIG_SYS_NO_FLASH +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS + +/* + * NAND Flash configuration + */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +#define BOOTFLASH_START 0x0 + +/* Kirkwood has two serial IF */ +#if (CONFIG_CONS_INDEX == 2) +#define CONFIG_KM_CONSOLE_TTY "ttyS1" +#else +#define CONFIG_KM_CONSOLE_TTY "ttyS0" +#endif + +/* + * Other required minimal configurations + */ +#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */ +#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ +#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ +#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ +#define CONFIG_NR_DRAM_BANKS 4 +#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ + +/* + * Ethernet Driver configuration + */ +#define CONFIG_NETCONSOLE /* include NetConsole support */ +#define CONFIG_MII /* expose smi ove miiphy interface */ +#define CONFIG_CMD_MII /* to debug mdio phy config */ +#define CONFIG_MVGBE /* Enable Marvell Gbe Controller Driver */ +#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ +#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ +#define CONFIG_PHY_BASE_ADR 0 +#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ + +/* + * UBI related stuff + */ +#define CONFIG_SYS_USE_UBI + +/* + * I2C related stuff + */ +#define CONFIG_KIRKWOOD_GPIO /* Enable GPIO Support */ +#if defined(CONFIG_SOFT_I2C) +#ifndef __ASSEMBLY__ +#include <asm/arch-kirkwood/gpio.h> +extern void __set_direction(unsigned pin, int high); +void set_sda(int state); +void set_scl(int state); +int get_sda(void); +int get_scl(void); +#define KM_KIRKWOOD_SDA_PIN 8 +#define KM_KIRKWOOD_SCL_PIN 9 +#define KM_KIRKWOOD_SOFT_I2C_GPIOS 0x0300 +#define KM_KIRKWOOD_ENV_WP 38 + +#define I2C_ACTIVE __set_direction(KM_KIRKWOOD_SDA_PIN, 0) +#define I2C_TRISTATE __set_direction(KM_KIRKWOOD_SDA_PIN, 1) +#define I2C_READ (kw_gpio_get_value(KM_KIRKWOOD_SDA_PIN) ? 1 : 0) +#define I2C_SDA(bit) kw_gpio_set_value(KM_KIRKWOOD_SDA_PIN, bit) +#define I2C_SCL(bit) kw_gpio_set_value(KM_KIRKWOOD_SCL_PIN, bit) +#endif + +#define I2C_DELAY udelay(1) +#define I2C_SOFT_DECLARATIONS + +#endif + +/* EEprom support 24C128, 24C256 valid for environment eeprom */ +#define CONFIG_SYS_I2C_MULTI_EEPROMS +#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 Byte write page */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 + +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 + +/* + * Environment variables configurations + */ +#if defined CONFIG_KM_ENV_IS_IN_SPI_NOR +#define CONFIG_ENV_IS_IN_SPI_FLASH /* use SPI-Flash for environment vars */ +#define CONFIG_ENV_OFFSET 0xc0000 /* no bracets! */ +#define CONFIG_ENV_SIZE 0x02000 /* Size of Environment */ +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_TOTAL_SIZE 0x20000 /* no bracets! */ +#else +#define CONFIG_ENV_IS_IN_EEPROM /* use EEPROM for environment vars */ +#define CONFIG_SYS_DEF_EEPROM_ADDR 0x50 +#define CONFIG_ENV_EEPROM_IS_ON_I2C +#define CONFIG_SYS_EEPROM_WREN +#define CONFIG_ENV_OFFSET 0x0 /* no bracets! */ +#define CONFIG_ENV_SIZE (0x2000 - CONFIG_ENV_OFFSET) +#define CONFIG_I2C_ENV_EEPROM_BUS KM_ENV_BUS "\0" +#define CONFIG_ENV_OFFSET_REDUND 0x2000 /* no bracets! */ +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) +#endif + +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT + +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO + +/* SPI bus claim MPP configuration */ +#define CONFIG_SYS_KW_SPI_MPP 0x0 + +#define FLASH_GPIO_PIN 0x00010000 +#define KM_FLASH_GPIO_PIN 16 + +#ifndef MTDIDS_DEFAULT +# define MTDIDS_DEFAULT "nand0=orion_nand" +#endif /* MTDIDS_DEFAULT */ + +#ifndef MTDPARTS_DEFAULT +# define MTDPARTS_DEFAULT "mtdparts=" \ + "orion_nand:" \ + "-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");" +#endif /* MTDPARTS_DEFAULT */ + +#define CONFIG_KM_UPDATE_UBOOT \ + "update=" \ + "sf probe 0;sf erase 0 +${filesize};" \ + "sf write ${load_addr_r} 0 ${filesize};\0" + +#if defined CONFIG_KM_ENV_IS_IN_SPI_NOR +#define CONFIG_KM_NEW_ENV \ + "newenv=sf probe 0;" \ + "sf erase " __stringify(CONFIG_ENV_OFFSET) " " \ + __stringify(CONFIG_ENV_TOTAL_SIZE)"\0" +#else +#define CONFIG_KM_NEW_ENV \ + "newenv=setenv addr 0x100000 && " \ + "i2c dev 1; mw.b ${addr} 0 4 && " \ + "eeprom write " __stringify(CONFIG_SYS_DEF_EEPROM_ADDR) \ + " ${addr} " __stringify(CONFIG_ENV_OFFSET) " 4 && " \ + "eeprom write " __stringify(CONFIG_SYS_DEF_EEPROM_ADDR) \ + " ${addr} " __stringify(CONFIG_ENV_OFFSET_REDUND) " 4\0" +#endif + +/* + * Default environment variables + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_KM_DEF_ENV \ + CONFIG_KM_NEW_ENV \ + "arch=arm\0" \ + "EEprom_ivm=" KM_IVM_BUS "\0" \ + "" + +#if defined(CONFIG_SYS_NO_FLASH) +#undef CONFIG_FLASH_CFI_MTD +#undef CONFIG_JFFS2_CMDLINE +#endif + +/* additions for new relocation code, must be added to all boards */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +/* Do early setups now in board_init_f() */ +#define CONFIG_BOARD_EARLY_INIT_F + +/* + * resereved pram area at the end of memroy [hex] + * 8Mbytes for switch + 4Kbytes for bootcount + */ +#define CONFIG_KM_RESERVED_PRAM 0x801000 +/* address for the bootcount (taken from end of RAM) */ +#define BOOTCOUNT_ADDR (CONFIG_KM_RESERVED_PRAM) +/* Use generic bootcount RAM driver */ +#define CONFIG_BOOTCOUNT_RAM + +/* enable POST tests */ +#define CONFIG_POST (CONFIG_SYS_POST_MEM_REGIONS) +#define CONFIG_POST_SKIP_ENV_FLAGS +#define CONFIG_POST_EXTERNAL_WORD_FUNCS +#define CONFIG_CMD_DIAG + +/* we do the whole PCIe FPGA config stuff here */ +#define CONFIG_BOARD_LATE_INIT + +#endif /* _CONFIG_KM_ARM_H */ |
